[SCSI] qla2xxx: Extend base EEH support in qla2xxx.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

1 files changed, 27 insertions, 4 deletions

diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index e91f3d82b2fd..056e4d4505f3 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -56,6 +56,12 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, base_vha->host_no));
 
+	if (ha->flags.pci_channel_io_perm_failure) {
+		DEBUG(printk("%s(%ld): Perm failure on EEH, timeout MBX "
+			     "Exiting.\n", __func__, vha->host_no));
+		return QLA_FUNCTION_TIMEOUT;
+	}
+
 	/*
 	 * Wait for active mailbox commands to finish by waiting at most tov
 	 * seconds. This is to serialize actual issuing of mailbox cmds during
@@ -154,10 +160,14 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 			/* Check for pending interrupts. */
 			qla2x00_poll(ha->rsp_q_map[0]);
 
-			if (command != MBC_LOAD_RISC_RAM_EXTENDED &&
-			    !ha->flags.mbox_int)
+			if (!ha->flags.mbox_int &&
+			    !(IS_QLA2200(ha) &&
+			    command == MBC_LOAD_RISC_RAM_EXTENDED))
 				msleep(10);
 		} /* while */
+		DEBUG17(qla_printk(KERN_WARNING, ha,
+			"Waited %d sec\n",
+			(uint)((jiffies - (wait_time - (mcp->tov * HZ)))/HZ)));
 	}
 
 	/* Check whether we timed out */
@@ -227,7 +237,8 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 
 	if (rval == QLA_FUNCTION_TIMEOUT &&
 	    mcp->mb[0] != MBC_GEN_SYSTEM_ERROR) {
-		if (!io_lock_on || (mcp->flags & IOCTL_CMD)) {
+		if (!io_lock_on || (mcp->flags & IOCTL_CMD) ||
+		    ha->flags.eeh_busy) {
 			/* not in dpc. schedule it for dpc to take over. */
 			DEBUG(printk("%s(%ld): timeout schedule "
 			"isp_abort_needed.\n", __func__,
@@ -237,7 +248,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 			base_vha->host_no));
 			qla_printk(KERN_WARNING, ha,
 			    "Mailbox command timeout occurred. Scheduling ISP "
-			    "abort.\n");
+			    "abort. eeh_busy: 0x%x\n", ha->flags.eeh_busy);
 			set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags);
 			qla2xxx_wake_dpc(vha);
 		} else if (!abort_active) {
@@ -2530,6 +2541,9 @@ qla2x00_enable_eft_trace(scsi_qla_host_t *vha, dma_addr_t eft_dma,
 	if (!IS_FWI2_CAPABLE(vha->hw))
 		return QLA_FUNCTION_FAILED;
 
+	if (unlikely(pci_channel_offline(vha->hw->pdev)))
+		return QLA_FUNCTION_FAILED;
+
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
 
 	mcp->mb[0] = MBC_TRACE_CONTROL;
@@ -2565,6 +2579,9 @@ qla2x00_disable_eft_trace(scsi_qla_host_t *vha)
 	if (!IS_FWI2_CAPABLE(vha->hw))
 		return QLA_FUNCTION_FAILED;
 
+	if (unlikely(pci_channel_offline(vha->hw->pdev)))
+		return QLA_FUNCTION_FAILED;
+
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
 
 	mcp->mb[0] = MBC_TRACE_CONTROL;
@@ -2595,6 +2612,9 @@ qla2x00_enable_fce_trace(scsi_qla_host_t *vha, dma_addr_t fce_dma,
 	if (!IS_QLA25XX(vha->hw) && !IS_QLA81XX(vha->hw))
 		return QLA_FUNCTION_FAILED;
 
+	if (unlikely(pci_channel_offline(vha->hw->pdev)))
+		return QLA_FUNCTION_FAILED;
+
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
 
 	mcp->mb[0] = MBC_TRACE_CONTROL;
@@ -2639,6 +2659,9 @@ qla2x00_disable_fce_trace(scsi_qla_host_t *vha, uint64_t *wr, uint64_t *rd)
 	if (!IS_FWI2_CAPABLE(vha->hw))
 		return QLA_FUNCTION_FAILED;
 
+	if (unlikely(pci_channel_offline(vha->hw->pdev)))
+		return QLA_FUNCTION_FAILED;
+
 	DEBUG11(printk("%s(%ld): entered.\n", __func__, vha->host_no));
 
 	mcp->mb[0] = MBC_TRACE_CONTROL;