diff options
| author | David Brownell <dbrownell@users.sourceforge.net> | 2009-06-17 16:26:03 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2009-06-18 13:03:42 -0700 |
| commit | 7d0771970c51e736758525dd71fb82dd036b823a (patch) | |
| tree | 9ff72b89cd06cd67e0db681859606dd77f5cba80 /drivers/spi/pxa2xx_spi.c | |
| parent | b4bd2ababd20b6ecdd49cf96e39c875fbedd53af (diff) | |
spi: move common spi_setup() functionality into core
Start moving some spi_setup() functionality into the SPI core from the
various spi_master controller drivers:
- Make that function stop being an inline;
- Move two common idioms from drivers into that new function:
* Default bits_per_word to 8 if that field isn't set
* Issue a standardized dev_dbg() message
This is a net minor source code shrink, and supports enhancments found in
some follow-up patches.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/spi/pxa2xx_spi.c')
| -rw-r--r-- | drivers/spi/pxa2xx_spi.c | 11 |
1 files changed, 2 insertions, 9 deletions
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index 3f3c08c6ba4e..c7365e0b22dd 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -1236,9 +1236,6 @@ static int setup(struct spi_device *spi) uint tx_thres = TX_THRESH_DFLT; uint rx_thres = RX_THRESH_DFLT; - if (!spi->bits_per_word) - spi->bits_per_word = 8; - if (drv_data->ssp_type != PXA25x_SSP && (spi->bits_per_word < 4 || spi->bits_per_word > 32)) { dev_err(&spi->dev, "failed setup: ssp_type=%d, bits/wrd=%d " @@ -1328,18 +1325,14 @@ static int setup(struct spi_device *spi) /* NOTE: PXA25x_SSP _could_ use external clocking ... */ if (drv_data->ssp_type != PXA25x_SSP) - dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d, %s\n", - spi->bits_per_word, + dev_dbg(&spi->dev, "%ld Hz actual, %s\n", clk_get_rate(ssp->clk) / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)), - spi->mode & 0x3, chip->enable_dma ? "DMA" : "PIO"); else - dev_dbg(&spi->dev, "%d bits/word, %ld Hz, mode %d, %s\n", - spi->bits_per_word, + dev_dbg(&spi->dev, "%ld Hz actual, %s\n", clk_get_rate(ssp->clk) / 2 / (1 + ((chip->cr0 & SSCR0_SCR) >> 8)), - spi->mode & 0x3, chip->enable_dma ? "DMA" : "PIO"); if (spi->bits_per_word <= 8) { |