diff options
| author | Ian Abbott <abbotti@mev.co.uk> | 2017-01-04 10:55:35 +0000 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2017-01-10 17:38:32 +0100 |
| commit | 1736bcf3c53fee7331279060556fa60b6e9f4b2d (patch) | |
| tree | e620f8f807c8d2d8a9f26747bf3a70659073e5bb /drivers/staging/comedi/drivers/daqboard2000.c | |
| parent | 1d7f14dd927a05777532abd0962b40e728ae1d67 (diff) | |
staging: comedi: daqboard2000: define macros for CPLD registers
The Daqboard/2000 uses a write-only data register and a read-only status
register in a pre-programmed CPLD device to program the main firmware on
the board. Both registers are at offset 0x1000 from PCI BAR 2. Define
macros for the register offsets. Rename the existing macros for the
status register values for consistency. (Two status bits are defined,
but the driver code only seems to use one of them.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/staging/comedi/drivers/daqboard2000.c')
| -rw-r--r-- | drivers/staging/comedi/drivers/daqboard2000.c | 23 |
1 files changed, 13 insertions, 10 deletions
diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c index b23a9feb975c..954a1a536fb4 100644 --- a/drivers/staging/comedi/drivers/daqboard2000.c +++ b/drivers/staging/comedi/drivers/daqboard2000.c @@ -116,10 +116,6 @@ #define DAQBOARD2000_SUBSYSTEM_IDS2 0x0002 /* Daqboard/2000 - 2 Dacs */ #define DAQBOARD2000_SUBSYSTEM_IDS4 0x0004 /* Daqboard/2000 - 4 Dacs */ -/* CPLD status bits */ -#define DAQBOARD2000_CPLD_INIT 0x0002 -#define DAQBOARD2000_CPLD_DONE 0x0004 - static const struct comedi_lrange range_daqboard2000_ai = { 13, { BIP_RANGE(10), @@ -173,6 +169,10 @@ static const struct comedi_lrange range_daqboard2000_ai = { #define DB2K_REG_TRIG_DACS 0xbc /* u16 */ #define DB2K_REG_DIO_P2_EXP_IO_16_BIT(x) (0xc0 + (x) * 2) /* s16 */ +/* CPLD registers */ +#define DB2K_REG_CPLD_STATUS 0x1000 /* u16 (r) */ +#define DB2K_REG_CPLD_WDATA 0x1000 /* u16 (w) */ + /* Scan Sequencer programming */ #define DB2K_ACQ_CONTROL_SEQ_START_SCAN_LIST 0x0011 #define DB2K_ACQ_CONTROL_SEQ_STOP_SCAN_LIST 0x0010 @@ -238,6 +238,10 @@ static const struct comedi_lrange range_daqboard2000_ai = { #define DB2K_REF_DACS_SELECT_POS_REF 0x0100 #define DB2K_REF_DACS_SELECT_NEG_REF 0x0000 +/* CPLD status bits */ +#define DB2K_CPLD_STATUS_INIT 0x0002 +#define DB2K_CPLD_STATUS_TXDONE 0x0004 + struct daq200_boardtype { const char *name; int id; @@ -474,7 +478,7 @@ static int daqboard2000_poll_cpld(struct comedi_device *dev, int mask) /* timeout after 50 tries -> 5ms */ for (i = 0; i < 50; i++) { - cpld = readw(dev->mmio + 0x1000); + cpld = readw(dev->mmio + DB2K_REG_CPLD_STATUS); if ((cpld & mask) == mask) { result = 1; break; @@ -490,11 +494,10 @@ static int daqboard2000_write_cpld(struct comedi_device *dev, int data) int result = 0; usleep_range(10, 20); - writew(data, dev->mmio + 0x1000); - if ((readw(dev->mmio + 0x1000) & DAQBOARD2000_CPLD_INIT) == - DAQBOARD2000_CPLD_INIT) { + writew(data, dev->mmio + DB2K_REG_CPLD_WDATA); + if (readw(dev->mmio + DB2K_REG_CPLD_STATUS) & DB2K_CPLD_STATUS_INIT) result = 1; - } + return result; } @@ -517,7 +520,7 @@ static int daqboard2000_load_firmware(struct comedi_device *dev, daqboard2000_reset_local_bus(dev); daqboard2000_reload_plx(dev); daqboard2000_pulse_prog_pin(dev); - if (daqboard2000_poll_cpld(dev, DAQBOARD2000_CPLD_INIT)) { + if (daqboard2000_poll_cpld(dev, DB2K_CPLD_STATUS_INIT)) { for (i = 0; i < len; i++) { if (cpld_array[i] == 0xff && cpld_array[i + 1] == 0x20) |