include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>

28 files changed, 26 insertions, 3 deletions

diff --git a/drivers/staging/comedi/drivers/8255.c b/drivers/staging/comedi/drivers/8255.c
index 10f488f0e5ee..2d54993ffb12 100644
--- a/drivers/staging/comedi/drivers/8255.c
+++ b/drivers/staging/comedi/drivers/8255.c
@@ -81,6 +81,7 @@ I/O port base address can be found in the output of 'lspci -v'.
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
+#include <linux/slab.h>
 
 #define _8255_SIZE 4
 
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_common.c b/drivers/staging/comedi/drivers/addi-data/addi_common.c
index 8db5ab63e363..6625fdc8e903 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_common.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_common.c
@@ -50,7 +50,6 @@ You should also find the complete GPL in the COPYING file accompanying this sour
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
-#include <linux/slab.h>
 #include <linux/errno.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
@@ -58,6 +57,7 @@ You should also find the complete GPL in the COPYING file accompanying this sour
 #include <linux/timex.h>
 #include <linux/timer.h>
 #include <linux/pci.h>
+#include <linux/gfp.h>
 #include "../../comedidev.h"
 #include <asm/io.h>
 #if defined(CONFIG_APCI_1710) || defined(CONFIG_APCI_3200) || defined(CONFIG_APCI_3300)
diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c b/drivers/staging/comedi/drivers/adl_pci9118.c
index 9934a3cf2548..944f20ae5a6a 100644
--- a/drivers/staging/comedi/drivers/adl_pci9118.c
+++ b/drivers/staging/comedi/drivers/adl_pci9118.c
@@ -66,6 +66,7 @@ Configuration options:
 #include "../pci_ids.h"
 
 #include <linux/delay.h>
+#include <linux/gfp.h>
 #include <linux/interrupt.h>
 
 #include "amcc_s5933.h"
diff --git a/drivers/staging/comedi/drivers/amplc_dio200.c b/drivers/staging/comedi/drivers/amplc_dio200.c
index 204f30ef6e96..92bcc205dd4b 100644
--- a/drivers/staging/comedi/drivers/amplc_dio200.c
+++ b/drivers/staging/comedi/drivers/amplc_dio200.c
@@ -206,6 +206,7 @@ order they appear in the channel list.
 */
 
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 
 #include "../comedidev.h"
 
diff --git a/drivers/staging/comedi/drivers/amplc_pci224.c b/drivers/staging/comedi/drivers/amplc_pci224.c
index b41e5e5963aa..c54cca8b2565 100644
--- a/drivers/staging/comedi/drivers/amplc_pci224.c
+++ b/drivers/staging/comedi/drivers/amplc_pci224.c
@@ -104,6 +104,7 @@ Caveats:
 */
 
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 
 #include "../comedidev.h"
 
diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c
index bc375e73abc1..5632991760af 100644
--- a/drivers/staging/comedi/drivers/cb_das16_cs.c
+++ b/drivers/staging/comedi/drivers/cb_das16_cs.c
@@ -32,6 +32,7 @@ Status: experimental
 */
 
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 #include "../comedidev.h"
 #include <linux/delay.h>
 #include <linux/pci.h>
diff --git a/drivers/staging/comedi/drivers/comedi_bond.c b/drivers/staging/comedi/drivers/comedi_bond.c
index d7260cc86985..41311d99473b 100644
--- a/drivers/staging/comedi/drivers/comedi_bond.c
+++ b/drivers/staging/comedi/drivers/comedi_bond.c
@@ -90,6 +90,7 @@ Configuration Options:
 #include "../comedilib.h"
 #include "../comedidev.h"
 #include <linux/string.h>
+#include <linux/slab.h>
 
 /* The maxiumum number of channels per subdevice. */
 #define MAX_CHANS 256
diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c
index f12ef1cd6f53..9164ce158dcd 100644
--- a/drivers/staging/comedi/drivers/das08_cs.c
+++ b/drivers/staging/comedi/drivers/das08_cs.c
@@ -43,6 +43,7 @@ Command support does not exist, but could be added for this board.
 
 #include <linux/delay.h>
 #include <linux/pci.h>
+#include <linux/slab.h>
 
 #include "das08.h"
 
diff --git a/drivers/staging/comedi/drivers/das16.c b/drivers/staging/comedi/drivers/das16.c
index 10a87e6a8095..f2aadda9b241 100644
--- a/drivers/staging/comedi/drivers/das16.c
+++ b/drivers/staging/comedi/drivers/das16.c
@@ -79,6 +79,7 @@ Computer boards manuals also available from their website www.measurementcomputi
 */
 
 #include <linux/pci.h>
+#include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <asm/dma.h>
 #include "../comedidev.h"
diff --git a/drivers/staging/comedi/drivers/das1800.c b/drivers/staging/comedi/drivers/das1800.c
index 6ea59cc6b2bb..3c3e0455c7c4 100644
--- a/drivers/staging/comedi/drivers/das1800.c
+++ b/drivers/staging/comedi/drivers/das1800.c
@@ -101,6 +101,7 @@ TODO:
 */
 
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
diff --git a/drivers/staging/comedi/drivers/dt282x.c b/drivers/staging/comedi/drivers/dt282x.c
index 99ca294b1ec5..e548763cf2f3 100644
--- a/drivers/staging/comedi/drivers/dt282x.c
+++ b/drivers/staging/comedi/drivers/dt282x.c
@@ -58,6 +58,7 @@ Notes:
 
 #include "../comedidev.h"
 
+#include <linux/gfp.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
 #include <asm/dma.h>
diff --git a/drivers/staging/comedi/drivers/jr3_pci.c b/drivers/staging/comedi/drivers/jr3_pci.c
index fe5b4953f7ec..d330b1886846 100644
--- a/drivers/staging/comedi/drivers/jr3_pci.c
+++ b/drivers/staging/comedi/drivers/jr3_pci.c
@@ -46,6 +46,7 @@ Devices: [JR3] PCI force sensor board (jr3_pci)
 #include <linux/ctype.h>
 #include <linux/firmware.h>
 #include <linux/jiffies.h>
+#include <linux/slab.h>
 #include <linux/timer.h>
 #include "comedi_pci.h"
 #include "jr3_pci.h"
diff --git a/drivers/staging/comedi/drivers/ni_65xx.c b/drivers/staging/comedi/drivers/ni_65xx.c
index c223f76031f6..9a4fffe5655f 100644
--- a/drivers/staging/comedi/drivers/ni_65xx.c
+++ b/drivers/staging/comedi/drivers/ni_65xx.c
@@ -52,6 +52,7 @@ except maybe the 6514.
 #define DEBUG 1
 #define DEBUG_FLAGS
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 #include "../comedidev.h"
 
 #include "mite.h"
diff --git a/drivers/staging/comedi/drivers/ni_670x.c b/drivers/staging/comedi/drivers/ni_670x.c
index 1e792d592f73..68221bfba5dd 100644
--- a/drivers/staging/comedi/drivers/ni_670x.c
+++ b/drivers/staging/comedi/drivers/ni_670x.c
@@ -42,6 +42,7 @@ Commands are not supported.
 */
 
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 #include "../comedidev.h"
 
 #include "mite.h"
diff --git a/drivers/staging/comedi/drivers/ni_at_a2150.c b/drivers/staging/comedi/drivers/ni_at_a2150.c
index dd75dfb34309..9bff34cf06d1 100644
--- a/drivers/staging/comedi/drivers/ni_at_a2150.c
+++ b/drivers/staging/comedi/drivers/ni_at_a2150.c
@@ -65,6 +65,7 @@ TRIG_WAKE_EOS
 */
 
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c
index c9b0395a6103..7ea64538e055 100644
--- a/drivers/staging/comedi/drivers/ni_daq_700.c
+++ b/drivers/staging/comedi/drivers/ni_daq_700.c
@@ -42,6 +42,7 @@ IRQ is assigned but not used.
 */
 
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c
index 9017be3a92f1..ddc312b5d20d 100644
--- a/drivers/staging/comedi/drivers/ni_daq_dio24.c
+++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c
@@ -41,6 +41,7 @@ the PCMCIA interface.
 #undef LABPC_DEBUG
 
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 #include "../comedidev.h"
 
 #include <linux/ioport.h>
diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 3c88caaa9dab..558e525fed37 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -77,6 +77,7 @@ NI manuals:
 /* #define LABPC_DEBUG    enable debugging messages */
 
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 #include "../comedidev.h"
 
 #include <linux/delay.h>
diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c
index 0b963bb3328b..8ad1055a5cc1 100644
--- a/drivers/staging/comedi/drivers/ni_labpc_cs.c
+++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c
@@ -64,6 +64,7 @@ NI manuals:
 #include "../comedidev.h"
 
 #include <linux/delay.h>
+#include <linux/slab.h>
 
 #include "8253.h"
 #include "8255.h"
diff --git a/drivers/staging/comedi/drivers/pcl812.c b/drivers/staging/comedi/drivers/pcl812.c
index d4634c4f02dc..1ddc19c705a6 100644
--- a/drivers/staging/comedi/drivers/pcl812.c
+++ b/drivers/staging/comedi/drivers/pcl812.c
@@ -108,6 +108,7 @@ Options for ACL-8113, ISO-813:
 */
 
 #include <linux/interrupt.h>
+#include <linux/gfp.h>
 #include "../comedidev.h"
 
 #include <linux/delay.h>
diff --git a/drivers/staging/comedi/drivers/pcl816.c b/drivers/staging/comedi/drivers/pcl816.c
index 9820759ec54f..71c2a3aa379e 100644
--- a/drivers/staging/comedi/drivers/pcl816.c
+++ b/drivers/staging/comedi/drivers/pcl816.c
@@ -36,6 +36,7 @@ Configuration Options:
 
 #include <linux/ioport.h>
 #include <linux/mc146818rtc.h>
+#include <linux/gfp.h>
 #include <linux/delay.h>
 #include <asm/dma.h>
 
diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c
index c9d75385755d..9d6aa393ef13 100644
--- a/drivers/staging/comedi/drivers/pcl818.c
+++ b/drivers/staging/comedi/drivers/pcl818.c
@@ -102,6 +102,7 @@ A word or two about DMA. Driver support DMA operations at two ways:
 
 #include <linux/ioport.h>
 #include <linux/mc146818rtc.h>
+#include <linux/gfp.h>
 #include <linux/delay.h>
 #include <asm/dma.h>
 
diff --git a/drivers/staging/comedi/drivers/pcmmio.c b/drivers/staging/comedi/drivers/pcmmio.c
index 6ca4105610c1..025a52e8981d 100644
--- a/drivers/staging/comedi/drivers/pcmmio.c
+++ b/drivers/staging/comedi/drivers/pcmmio.c
@@ -77,6 +77,7 @@ Configuration Options:
 */
 
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 #include "../comedidev.h"
 #include "pcm_common.h"
 #include <linux/pci.h>		/* for PCI devices */
diff --git a/drivers/staging/comedi/drivers/pcmuio.c b/drivers/staging/comedi/drivers/pcmuio.c
index c1ae20ffb379..5af4c8448a3a 100644
--- a/drivers/staging/comedi/drivers/pcmuio.c
+++ b/drivers/staging/comedi/drivers/pcmuio.c
@@ -76,6 +76,7 @@ Configuration Options:
 */
 
 #include <linux/interrupt.h>
+#include <linux/slab.h>
 #include "../comedidev.h"
 #include "pcm_common.h"
 
diff --git a/drivers/staging/comedi/drivers/serial2002.c b/drivers/staging/comedi/drivers/serial2002.c
index dd2b90372794..0792617ebc35 100644
--- a/drivers/staging/comedi/drivers/serial2002.c
+++ b/drivers/staging/comedi/drivers/serial2002.c
@@ -36,6 +36,7 @@ Status: in development
 #include <linux/delay.h>
 #include <linux/ioport.h>
 #include <linux/sched.h>
+#include <linux/slab.h>
 
 #include <asm/termios.h>
 #include <asm/ioctls.h>
diff --git a/drivers/staging/comedi/drivers/unioxx5.c b/drivers/staging/comedi/drivers/unioxx5.c
index 75a9a62e1a70..be1d83df0de5 100644
--- a/drivers/staging/comedi/drivers/unioxx5.c
+++ b/drivers/staging/comedi/drivers/unioxx5.c
@@ -44,6 +44,7 @@ Devices: [Fastwel] UNIOxx-5 (unioxx5),
 
 #include "../comedidev.h"
 #include <linux/ioport.h>
+#include <linux/slab.h>
 
 #define DRIVER_NAME "unioxx5"
 #define UNIOXX5_SIZE 0x10
diff --git a/drivers/staging/comedi/kcomedilib/kcomedilib_main.c b/drivers/staging/comedi/kcomedilib/kcomedilib_main.c
index 6552ef6d8297..288fef4fcbcc 100644
--- a/drivers/staging/comedi/kcomedilib/kcomedilib_main.c
+++ b/drivers/staging/comedi/kcomedilib/kcomedilib_main.c
@@ -31,7 +31,6 @@
 #include <linux/delay.h>
 #include <linux/ioport.h>
 #include <linux/mm.h>
-#include <linux/slab.h>
 #include <asm/io.h>
 
 #include "../comedi.h"
diff --git a/drivers/staging/comedi/kcomedilib/ksyms.c b/drivers/staging/comedi/kcomedilib/ksyms.c
index 19293d1f998d..8bf4471ce6c1 100644
--- a/drivers/staging/comedi/kcomedilib/ksyms.c
+++ b/drivers/staging/comedi/kcomedilib/ksyms.c
@@ -34,7 +34,6 @@
 #include <linux/delay.h>
 #include <linux/ioport.h>
 #include <linux/mm.h>
-#include <linux/slab.h>
 
 /* functions specific to kcomedilib */