staging:iio:imu ADIS16400 and ADIS16405 driver

Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Barry Song <Barry.Song@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 849 insertions, 0 deletions

diff --git a/drivers/staging/iio/imu/adis16400_core.c b/drivers/staging/iio/imu/adis16400_core.c
new file mode 100644
index 000000000000..27e4a7348075
--- /dev/null
+++ b/drivers/staging/iio/imu/adis16400_core.c
@@ -0,0 +1,849 @@
+/*
+ * adis16400.c	support Analog Devices ADIS16400/5
+ *		3d 2g Linear Accelerometers,
+ *		3d Gyroscopes,
+ *		3d Magnetometers via SPI
+ *
+ * Copyright (c) 2009 Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
+ * Copyright (c) 2007 Jonathan Cameron <jic23@cam.ac.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+
+#include <linux/sysfs.h>
+#include <linux/list.h>
+
+#include "../iio.h"
+#include "../sysfs.h"
+#include "../accel/accel.h"
+#include "../adc/adc.h"
+#include "../gyro/gyro.h"
+#include "../magnetometer/magnet.h"
+
+#include "adis16400.h"
+
+#define DRIVER_NAME		"adis16400"
+
+/* At the moment the spi framework doesn't allow global setting of cs_change.
+ * It's in the likely to be added comment at the top of spi.h.
+ * This means that use cannot be made of spi_write etc.
+ */
+
+/**
+ * adis16400_spi_write_reg_8() - write single byte to a register
+ * @dev: device associated with child of actual device (iio_dev or iio_trig)
+ * @reg_address: the address of the register to be written
+ * @val: the value to write
+ **/
+int adis16400_spi_write_reg_8(struct device *dev,
+		u8 reg_address,
+		u8 val)
+{
+	int ret;
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct adis16400_state *st = iio_dev_get_devdata(indio_dev);
+
+	mutex_lock(&st->buf_lock);
+	st->tx[0] = ADIS16400_WRITE_REG(reg_address);
+	st->tx[1] = val;
+
+	ret = spi_write(st->us, st->tx, 2);
+	mutex_unlock(&st->buf_lock);
+
+	return ret;
+}
+
+/**
+ * adis16400_spi_write_reg_16() - write 2 bytes to a pair of registers
+ * @dev: device associated with child of actual device (iio_dev or iio_trig)
+ * @reg_address: the address of the lower of the two registers. Second register
+ *               is assumed to have address one greater.
+ * @val: value to be written
+ **/
+static int adis16400_spi_write_reg_16(struct device *dev,
+		u8 lower_reg_address,
+		u16 value)
+{
+	int ret;
+	struct spi_message msg;
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct adis16400_state *st = iio_dev_get_devdata(indio_dev);
+	struct spi_transfer xfers[] = {
+		{
+			.tx_buf = st->tx,
+			.bits_per_word = 8,
+			.len = 2,
+			.cs_change = 1,
+		}, {
+			.tx_buf = st->tx + 2,
+			.bits_per_word = 8,
+			.len = 2,
+			.cs_change = 1,
+		},
+	};
+
+	mutex_lock(&st->buf_lock);
+	st->tx[0] = ADIS16400_WRITE_REG(lower_reg_address);
+	st->tx[1] = value & 0xFF;
+	st->tx[2] = ADIS16400_WRITE_REG(lower_reg_address + 1);
+	st->tx[3] = (value >> 8) & 0xFF;
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfers[0], &msg);
+	spi_message_add_tail(&xfers[1], &msg);
+	ret = spi_sync(st->us, &msg);
+	mutex_unlock(&st->buf_lock);
+
+	return ret;
+}
+
+/**
+ * adis16400_spi_read_reg_16() - read 2 bytes from a 16-bit register
+ * @dev: device associated with child of actual device (iio_dev or iio_trig)
+ * @reg_address: the address of the lower of the two registers. Second register
+ *               is assumed to have address one greater.
+ * @val: somewhere to pass back the value read
+ **/
+static int adis16400_spi_read_reg_16(struct device *dev,
+		u8 lower_reg_address,
+		u16 *val)
+{
+	struct spi_message msg;
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct adis16400_state *st = iio_dev_get_devdata(indio_dev);
+	int ret;
+	struct spi_transfer xfers[] = {
+		{
+			.tx_buf = st->tx,
+			.bits_per_word = 8,
+			.len = 2,
+			.cs_change = 1,
+		}, {
+			.rx_buf = st->rx,
+			.bits_per_word = 8,
+			.len = 2,
+			.cs_change = 1,
+		},
+	};
+
+	mutex_lock(&st->buf_lock);
+	st->tx[0] = ADIS16400_READ_REG(lower_reg_address);
+	st->tx[1] = 0;
+	st->tx[2] = 0;
+	st->tx[3] = 0;
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfers[0], &msg);
+	spi_message_add_tail(&xfers[1], &msg);
+	ret = spi_sync(st->us, &msg);
+	if (ret) {
+		dev_err(&st->us->dev,
+			"problem when reading 16 bit register 0x%02X",
+			lower_reg_address);
+		goto error_ret;
+	}
+	*val = (st->rx[0] << 8) | st->rx[1];
+
+error_ret:
+	mutex_unlock(&st->buf_lock);
+	return ret;
+}
+
+/**
+ * adis16400_spi_read_burst() - read all data registers
+ * @dev: device associated with child of actual device (iio_dev or iio_trig)
+ * @rx: somewhere to pass back the value read (min size is 24 bytes)
+ **/
+int adis16400_spi_read_burst(struct device *dev, u8 *rx)
+{
+	struct spi_message msg;
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct adis16400_state *st = iio_dev_get_devdata(indio_dev);
+	u32 old_speed_hz = st->us->max_speed_hz;
+	int ret;
+
+	struct spi_transfer xfers[] = {
+		{
+			.tx_buf = st->tx,
+			.bits_per_word = 8,
+			.len = 2,
+			.cs_change = 0,
+		}, {
+			.rx_buf = rx,
+			.bits_per_word = 8,
+			.len = 24,
+			.cs_change = 1,
+		},
+	};
+
+	mutex_lock(&st->buf_lock);
+	st->tx[0] = ADIS16400_READ_REG(ADIS16400_GLOB_CMD);
+	st->tx[1] = 0;
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfers[0], &msg);
+	spi_message_add_tail(&xfers[1], &msg);
+
+	st->us->max_speed_hz = min(ADIS16400_SPI_BURST, old_speed_hz);
+	spi_setup(st->us);
+
+	ret = spi_sync(st->us, &msg);
+	if (ret)
+		dev_err(&st->us->dev, "problem when burst reading");
+
+	st->us->max_speed_hz = old_speed_hz;
+	spi_setup(st->us);
+	mutex_unlock(&st->buf_lock);
+	return ret;
+}
+
+/**
+ * adis16400_spi_read_sequence() - read a sequence of 16-bit registers
+ * @dev: device associated with child of actual device (iio_dev or iio_trig)
+ * @tx: register addresses in bytes 0,2,4,6... (min size is 2*num bytes)
+ * @rx: somewhere to pass back the value read (min size is 2*num bytes)
+ **/
+int adis16400_spi_read_sequence(struct device *dev,
+		u8 *tx, u8 *rx, int num)
+{
+	struct spi_message msg;
+	struct spi_transfer *xfers;
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct adis16400_state *st = iio_dev_get_devdata(indio_dev);
+	int ret, i;
+
+	xfers = kzalloc(num + 1, GFP_KERNEL);
+	if (xfers == NULL) {
+		dev_err(&st->us->dev, "memory alloc failed");
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+
+	/* tx: |add1|addr2|addr3|...|addrN |zero|
+	 * rx: |zero|res1 |res2 |...|resN-1|resN| */
+	spi_message_init(&msg);
+	for (i = 0; i < num + 1; i++) {
+		if (i > 0)
+			xfers[i].rx_buf = st->rx + 2*(i - 1);
+		if (i < num)
+			xfers[i].tx_buf = st->tx + 2*i;
+		xfers[i].bits_per_word = 8;
+		xfers[i].len = 2;
+		xfers[i].cs_change = 1;
+		spi_message_add_tail(&xfers[i], &msg);
+	}
+
+	mutex_lock(&st->buf_lock);
+
+	ret = spi_sync(st->us, &msg);
+	if (ret)
+		dev_err(&st->us->dev, "problem when reading sequence");
+
+	mutex_unlock(&st->buf_lock);
+	kfree(xfers);
+
+error_ret:
+	return ret;
+}
+
+static ssize_t adis16400_spi_read_signed(struct device *dev,
+		struct device_attribute *attr,
+		char *buf,
+		unsigned bits)
+{
+	int ret;
+	s16 val = 0;
+	unsigned shift = 16 - bits;
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+
+	ret = adis16400_spi_read_reg_16(dev, this_attr->address, (u16 *)&val);
+	if (ret)
+		return ret;
+
+	if (val & ADIS16400_ERROR_ACTIVE)
+		adis16400_check_status(dev);
+	val = ((s16)(val << shift) >> shift);
+	return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t adis16400_read_12bit_unsigned(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	int ret;
+	u16 val = 0;
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+
+	ret = adis16400_spi_read_reg_16(dev, this_attr->address, &val);
+	if (ret)
+		return ret;
+
+	if (val & ADIS16400_ERROR_ACTIVE)
+		adis16400_check_status(dev);
+
+	return sprintf(buf, "%u\n", val & 0x0FFF);
+}
+
+static ssize_t adis16400_read_14bit_signed(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	ssize_t ret;
+
+	/* Take the iio_dev status lock */
+	mutex_lock(&indio_dev->mlock);
+	ret =  adis16400_spi_read_signed(dev, attr, buf, 14);
+	mutex_unlock(&indio_dev->mlock);
+
+	return ret;
+}
+
+static ssize_t adis16400_read_12bit_signed(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	ssize_t ret;
+
+	/* Take the iio_dev status lock */
+	mutex_lock(&indio_dev->mlock);
+	ret =  adis16400_spi_read_signed(dev, attr, buf, 12);
+	mutex_unlock(&indio_dev->mlock);
+
+	return ret;
+}
+
+
+static ssize_t adis16400_write_16bit(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf,
+		size_t len)
+{
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	int ret;
+	long val;
+
+	ret = strict_strtol(buf, 10, &val);
+	if (ret)
+		goto error_ret;
+	ret = adis16400_spi_write_reg_16(dev, this_attr->address, val);
+
+error_ret:
+	return ret ? ret : len;
+}
+
+static ssize_t adis16400_read_frequency(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	int ret, len = 0;
+	u16 t;
+	int sps;
+	ret = adis16400_spi_read_reg_16(dev,
+			ADIS16400_SMPL_PRD,
+			&t);
+	if (ret)
+		return ret;
+	sps =  (t & ADIS16400_SMPL_PRD_TIME_BASE) ? 53 : 1638;
+	sps /= (t & ADIS16400_SMPL_PRD_DIV_MASK) + 1;
+	len = sprintf(buf, "%d SPS\n", sps);
+	return len;
+}
+
+static ssize_t adis16400_write_frequency(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf,
+		size_t len)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct adis16400_state *st = iio_dev_get_devdata(indio_dev);
+	long val;
+	int ret;
+	u8 t;
+
+	ret = strict_strtol(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	mutex_lock(&indio_dev->mlock);
+
+	t = (1638 / val);
+	if (t > 0)
+		t--;
+	t &= ADIS16400_SMPL_PRD_DIV_MASK;
+	if ((t & ADIS16400_SMPL_PRD_DIV_MASK) >= 0x0A)
+		st->us->max_speed_hz = ADIS16400_SPI_SLOW;
+	else
+		st->us->max_speed_hz = ADIS16400_SPI_FAST;
+
+	ret = adis16400_spi_write_reg_8(dev,
+			ADIS16400_SMPL_PRD,
+			t);
+
+	mutex_unlock(&indio_dev->mlock);
+
+	return ret ? ret : len;
+}
+
+static ssize_t adis16400_write_reset(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf, size_t len)
+{
+	if (len < 1)
+		return -1;
+	switch (buf[0]) {
+	case '1':
+	case 'y':
+	case 'Y':
+		return adis16400_reset(dev);
+	}
+	return -1;
+}
+
+
+
+int adis16400_set_irq(struct device *dev, bool enable)
+{
+	int ret;
+	u16 msc;
+	ret = adis16400_spi_read_reg_16(dev, ADIS16400_MSC_CTRL, &msc);
+	if (ret)
+		goto error_ret;
+
+	msc |= ADIS16400_MSC_CTRL_DATA_RDY_POL_HIGH;
+	if (enable)
+		msc |= ADIS16400_MSC_CTRL_DATA_RDY_EN;
+	else
+		msc &= ~ADIS16400_MSC_CTRL_DATA_RDY_EN;
+
+	ret = adis16400_spi_write_reg_16(dev, ADIS16400_MSC_CTRL, msc);
+	if (ret)
+		goto error_ret;
+
+error_ret:
+	return ret;
+}
+
+int adis16400_reset(struct device *dev)
+{
+	int ret;
+	ret = adis16400_spi_write_reg_8(dev,
+			ADIS16400_GLOB_CMD,
+			ADIS16400_GLOB_CMD_SW_RESET);
+	if (ret)
+		dev_err(dev, "problem resetting device");
+
+	return ret;
+}
+
+/* Power down the device */
+int adis16400_stop_device(struct device *dev)
+{
+	int ret;
+	u16 val = ADIS16400_SLP_CNT_POWER_OFF;
+
+	ret = adis16400_spi_write_reg_16(dev, ADIS16400_SLP_CNT, val);
+	if (ret)
+		dev_err(dev, "problem with turning device off: SLP_CNT");
+
+	return ret;
+}
+
+int adis16400_self_test(struct device *dev)
+{
+	int ret;
+	ret = adis16400_spi_write_reg_16(dev,
+			ADIS16400_MSC_CTRL,
+			ADIS16400_MSC_CTRL_MEM_TEST);
+	if (ret) {
+		dev_err(dev, "problem starting self test");
+		goto err_ret;
+	}
+
+	adis16400_check_status(dev);
+
+err_ret:
+	return ret;
+}
+
+int adis16400_check_status(struct device *dev)
+{
+	u16 status;
+	int ret;
+
+	ret = adis16400_spi_read_reg_16(dev, ADIS16400_DIAG_STAT, &status);
+
+	if (ret < 0) {
+		dev_err(dev, "Reading status failed\n");
+		goto error_ret;
+	}
+	ret = status;
+	if (status & ADIS16400_DIAG_STAT_ZACCL_FAIL)
+		dev_err(dev, "Z-axis accelerometer self-test failure\n");
+	if (status & ADIS16400_DIAG_STAT_YACCL_FAIL)
+		dev_err(dev, "Y-axis accelerometer self-test failure\n");
+	if (status & ADIS16400_DIAG_STAT_XACCL_FAIL)
+		dev_err(dev, "X-axis accelerometer self-test failure\n");
+	if (status & ADIS16400_DIAG_STAT_XGYRO_FAIL)
+		dev_err(dev, "X-axis gyroscope self-test failure\n");
+	if (status & ADIS16400_DIAG_STAT_YGYRO_FAIL)
+		dev_err(dev, "Y-axis gyroscope self-test failure\n");
+	if (status & ADIS16400_DIAG_STAT_ZGYRO_FAIL)
+		dev_err(dev, "Z-axis gyroscope self-test failure\n");
+	if (status & ADIS16400_DIAG_STAT_ALARM2)
+		dev_err(dev, "Alarm 2 active\n");
+	if (status & ADIS16400_DIAG_STAT_ALARM1)
+		dev_err(dev, "Alarm 1 active\n");
+	if (status & ADIS16400_DIAG_STAT_FLASH_CHK)
+		dev_err(dev, "Flash checksum error\n");
+	if (status & ADIS16400_DIAG_STAT_SELF_TEST)
+		dev_err(dev, "Self test error\n");
+	if (status & ADIS16400_DIAG_STAT_OVERFLOW)
+		dev_err(dev, "Sensor overrange\n");
+	if (status & ADIS16400_DIAG_STAT_SPI_FAIL)
+		dev_err(dev, "SPI failure\n");
+	if (status & ADIS16400_DIAG_STAT_FLASH_UPT)
+		dev_err(dev, "Flash update failed\n");
+	if (status & ADIS16400_DIAG_STAT_POWER_HIGH)
+		dev_err(dev, "Power supply above 5.25V\n");
+	if (status & ADIS16400_DIAG_STAT_POWER_LOW)
+		dev_err(dev, "Power supply below 4.75V\n");
+
+error_ret:
+	return ret;
+}
+
+static int adis16400_initial_setup(struct adis16400_state *st)
+{
+	int ret;
+	u16 prod_id, smp_prd;
+	struct device *dev = &st->indio_dev->dev;
+
+	/* use low spi speed for init */
+	st->us->max_speed_hz = ADIS16400_SPI_SLOW;
+	st->us->mode = SPI_MODE_3;
+	spi_setup(st->us);
+
+	/* Disable IRQ */
+	ret = adis16400_set_irq(dev, false);
+	if (ret) {
+		dev_err(dev, "disable irq failed");
+		goto err_ret;
+	}
+
+	/* Do self test */
+
+	/* Read status register to check the result */
+	ret = adis16400_check_status(dev);
+	if (ret) {
+		adis16400_reset(dev);
+		dev_err(dev, "device not playing ball -> reset");
+		msleep(ADIS16400_STARTUP_DELAY);
+		ret = adis16400_check_status(dev);
+		if (ret) {
+			dev_err(dev, "giving up");
+			goto err_ret;
+		}
+	}
+
+	ret = adis16400_spi_read_reg_16(dev, ADIS16400_PRODUCT_ID, &prod_id);
+	if (ret)
+		goto err_ret;
+
+	if (prod_id != ADIS16400_PRODUCT_ID_DEFAULT)
+		dev_warn(dev, "unknown product id");
+
+	printk(KERN_INFO DRIVER_NAME ": prod_id 0x%04x at CS%d (irq %d)\n",
+			prod_id, st->us->chip_select, st->us->irq);
+
+	/* use high spi speed if possible */
+	ret = adis16400_spi_read_reg_16(dev, ADIS16400_SMPL_PRD, &smp_prd);
+	if (!ret && (smp_prd & ADIS16400_SMPL_PRD_DIV_MASK) < 0x0A) {
+		st->us->max_speed_hz = ADIS16400_SPI_SLOW;
+		spi_setup(st->us);
+	}
+
+
+err_ret:
+
+	return ret;
+}
+
+static IIO_DEV_ATTR_ACCEL_X_OFFSET(S_IWUSR | S_IRUGO,
+		adis16400_read_12bit_signed,
+		adis16400_write_16bit,
+		ADIS16400_XACCL_OFF);
+
+static IIO_DEV_ATTR_ACCEL_Y_OFFSET(S_IWUSR | S_IRUGO,
+		adis16400_read_12bit_signed,
+		adis16400_write_16bit,
+		ADIS16400_YACCL_OFF);
+
+static IIO_DEV_ATTR_ACCEL_Z_OFFSET(S_IWUSR | S_IRUGO,
+		adis16400_read_12bit_signed,
+		adis16400_write_16bit,
+		ADIS16400_ZACCL_OFF);
+
+static IIO_DEV_ATTR_IN_NAMED_RAW(supply, adis16400_read_14bit_signed,
+		ADIS16400_SUPPLY_OUT);
+static IIO_CONST_ATTR(in_supply_scale, "0.002418");
+
+static IIO_DEV_ATTR_GYRO_X(adis16400_read_14bit_signed,
+		ADIS16400_XGYRO_OUT);
+static IIO_DEV_ATTR_GYRO_Y(adis16400_read_14bit_signed,
+		ADIS16400_YGYRO_OUT);
+static IIO_DEV_ATTR_GYRO_Z(adis16400_read_14bit_signed,
+		ADIS16400_ZGYRO_OUT);
+static IIO_CONST_ATTR(gyro_scale, "0.05 deg/s");
+
+static IIO_DEV_ATTR_ACCEL_X(adis16400_read_14bit_signed,
+		ADIS16400_XACCL_OUT);
+static IIO_DEV_ATTR_ACCEL_Y(adis16400_read_14bit_signed,
+		ADIS16400_YACCL_OUT);
+static IIO_DEV_ATTR_ACCEL_Z(adis16400_read_14bit_signed,
+		ADIS16400_ZACCL_OUT);
+static IIO_CONST_ATTR(accel_scale, "0.00333 g");
+
+static IIO_DEV_ATTR_MAGN_X(adis16400_read_14bit_signed,
+		ADIS16400_XMAGN_OUT);
+static IIO_DEV_ATTR_MAGN_Y(adis16400_read_14bit_signed,
+		ADIS16400_YMAGN_OUT);
+static IIO_DEV_ATTR_MAGN_Z(adis16400_read_14bit_signed,
+		ADIS16400_ZMAGN_OUT);
+static IIO_CONST_ATTR(magn_scale, "0.0005 Gs");
+
+
+static IIO_DEV_ATTR_TEMP(adis16400_read_12bit_signed);
+static IIO_CONST_ATTR(temp_offset, "198.16 K");
+static IIO_CONST_ATTR(temp_scale, "0.14 K");
+
+static IIO_DEV_ATTR_IN_RAW(0, adis16400_read_12bit_unsigned,
+		ADIS16400_AUX_ADC);
+static IIO_CONST_ATTR(in0_scale, "0.000806");
+
+static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
+		adis16400_read_frequency,
+		adis16400_write_frequency);
+
+static IIO_DEVICE_ATTR(reset, S_IWUSR, NULL, adis16400_write_reset, 0);
+
+static IIO_CONST_ATTR_AVAIL_SAMP_FREQ("409 546 819 1638");
+
+static IIO_CONST_ATTR(name, "adis16400");
+
+static struct attribute *adis16400_event_attributes[] = {
+	NULL
+};
+
+static struct attribute_group adis16400_event_attribute_group = {
+	.attrs = adis16400_event_attributes,
+};
+
+static struct attribute *adis16400_attributes[] = {
+	&iio_dev_attr_accel_x_offset.dev_attr.attr,
+	&iio_dev_attr_accel_y_offset.dev_attr.attr,
+	&iio_dev_attr_accel_z_offset.dev_attr.attr,
+	&iio_dev_attr_in_supply_raw.dev_attr.attr,
+	&iio_const_attr_in_supply_scale.dev_attr.attr,
+	&iio_dev_attr_gyro_x.dev_attr.attr,
+	&iio_dev_attr_gyro_y.dev_attr.attr,
+	&iio_dev_attr_gyro_z.dev_attr.attr,
+	&iio_const_attr_gyro_scale.dev_attr.attr,
+	&iio_dev_attr_accel_x_raw.dev_attr.attr,
+	&iio_dev_attr_accel_y_raw.dev_attr.attr,
+	&iio_dev_attr_accel_z_raw.dev_attr.attr,
+	&iio_const_attr_accel_scale.dev_attr.attr,
+	&iio_dev_attr_magn_x.dev_attr.attr,
+	&iio_dev_attr_magn_y.dev_attr.attr,
+	&iio_dev_attr_magn_z.dev_attr.attr,
+	&iio_const_attr_magn_scale.dev_attr.attr,
+	&iio_dev_attr_temp.dev_attr.attr,
+	&iio_const_attr_temp_offset.dev_attr.attr,
+	&iio_const_attr_temp_scale.dev_attr.attr,
+	&iio_dev_attr_in0_raw.dev_attr.attr,
+	&iio_const_attr_in0_scale.dev_attr.attr,
+	&iio_dev_attr_sampling_frequency.dev_attr.attr,
+	&iio_const_attr_available_sampling_frequency.dev_attr.attr,
+	&iio_dev_attr_reset.dev_attr.attr,
+	&iio_const_attr_name.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group adis16400_attribute_group = {
+	.attrs = adis16400_attributes,
+};
+
+static int __devinit adis16400_probe(struct spi_device *spi)
+{
+	int ret, regdone = 0;
+	struct adis16400_state *st = kzalloc(sizeof *st, GFP_KERNEL);
+	if (!st) {
+		ret =  -ENOMEM;
+		goto error_ret;
+	}
+	/* this is only used for removal purposes */
+	spi_set_drvdata(spi, st);
+
+	/* Allocate the comms buffers */
+	st->rx = kzalloc(sizeof(*st->rx)*ADIS16400_MAX_RX, GFP_KERNEL);
+	if (st->rx == NULL) {
+		ret = -ENOMEM;
+		goto error_free_st;
+	}
+	st->tx = kzalloc(sizeof(*st->tx)*ADIS16400_MAX_TX, GFP_KERNEL);
+	if (st->tx == NULL) {
+		ret = -ENOMEM;
+		goto error_free_rx;
+	}
+	st->us = spi;
+	mutex_init(&st->buf_lock);
+	/* setup the industrialio driver allocated elements */
+	st->indio_dev = iio_allocate_device();
+	if (st->indio_dev == NULL) {
+		ret = -ENOMEM;
+		goto error_free_tx;
+	}
+
+	st->indio_dev->dev.parent = &spi->dev;
+	st->indio_dev->num_interrupt_lines = 1;
+	st->indio_dev->event_attrs = &adis16400_event_attribute_group;
+	st->indio_dev->attrs = &adis16400_attribute_group;
+	st->indio_dev->dev_data = (void *)(st);
+	st->indio_dev->driver_module = THIS_MODULE;
+	st->indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = adis16400_configure_ring(st->indio_dev);
+	if (ret)
+		goto error_free_dev;
+
+	ret = iio_device_register(st->indio_dev);
+	if (ret)
+		goto error_unreg_ring_funcs;
+	regdone = 1;
+
+	ret = adis16400_initialize_ring(st->indio_dev->ring);
+	if (ret) {
+		printk(KERN_ERR "failed to initialize the ring\n");
+		goto error_unreg_ring_funcs;
+	}
+
+	if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0) {
+#if 0 /* fixme: here we should support */
+		iio_init_work_cont(&st->work_cont_thresh,
+				NULL,
+				adis16400_thresh_handler_bh_no_check,
+				0,
+				0,
+				st);
+#endif
+		ret = iio_register_interrupt_line(spi->irq,
+				st->indio_dev,
+				0,
+				IRQF_TRIGGER_RISING,
+				"adis16400");
+		if (ret)
+			goto error_uninitialize_ring;
+
+		ret = adis16400_probe_trigger(st->indio_dev);
+		if (ret)
+			goto error_unregister_line;
+	}
+
+	/* Get the device into a sane initial state */
+	ret = adis16400_initial_setup(st);
+	if (ret)
+		goto error_remove_trigger;
+	return 0;
+
+error_remove_trigger:
+	if (st->indio_dev->modes & INDIO_RING_TRIGGERED)
+		adis16400_remove_trigger(st->indio_dev);
+error_unregister_line:
+	if (st->indio_dev->modes & INDIO_RING_TRIGGERED)
+		iio_unregister_interrupt_line(st->indio_dev, 0);
+error_uninitialize_ring:
+	adis16400_uninitialize_ring(st->indio_dev->ring);
+error_unreg_ring_funcs:
+	adis16400_unconfigure_ring(st->indio_dev);
+error_free_dev:
+	if (regdone)
+		iio_device_unregister(st->indio_dev);
+	else
+		iio_free_device(st->indio_dev);
+error_free_tx:
+	kfree(st->tx);
+error_free_rx:
+	kfree(st->rx);
+error_free_st:
+	kfree(st);
+error_ret:
+	return ret;
+}
+
+/* fixme, confirm ordering in this function */
+static int adis16400_remove(struct spi_device *spi)
+{
+	int ret;
+	struct adis16400_state *st = spi_get_drvdata(spi);
+	struct iio_dev *indio_dev = st->indio_dev;
+
+	ret = adis16400_stop_device(&(indio_dev->dev));
+	if (ret)
+		goto err_ret;
+
+	flush_scheduled_work();
+
+	adis16400_remove_trigger(indio_dev);
+	if (spi->irq && gpio_is_valid(irq_to_gpio(spi->irq)) > 0)
+		iio_unregister_interrupt_line(indio_dev, 0);
+
+	adis16400_uninitialize_ring(indio_dev->ring);
+	adis16400_unconfigure_ring(indio_dev);
+	iio_device_unregister(indio_dev);
+	kfree(st->tx);
+	kfree(st->rx);
+	kfree(st);
+
+	return 0;
+
+err_ret:
+	return ret;
+}
+
+static struct spi_driver adis16400_driver = {
+	.driver = {
+		.name = "adis16400",
+		.owner = THIS_MODULE,
+	},
+	.probe = adis16400_probe,
+	.remove = __devexit_p(adis16400_remove),
+};
+
+static __init int adis16400_init(void)
+{
+	return spi_register_driver(&adis16400_driver);
+}
+module_init(adis16400_init);
+
+static __exit void adis16400_exit(void)
+{
+	spi_unregister_driver(&adis16400_driver);
+}
+module_exit(adis16400_exit);
+
+MODULE_AUTHOR("Manuel Stahl <manuel.stahl@iis.fraunhofer.de>");
+MODULE_DESCRIPTION("Analog Devices ADIS16400/5 IMU SPI driver");
+MODULE_LICENSE("GPL v2");