Staging: rt28x0: updates from vendor's V2.1.0.0 drivers

Port changes from:

* 2009_0420_RT2860_Linux_STA_V2.1.0.0
* 2009_0302_RT2870_Linux_STA_v2.1.0.0
* 2009_0525_RT3070_Linux_STA_v2.1.1.0

to in-kernel drivers.


From the RT2860 driver release note:

[2.1.0.0]
1. New generation schema for multiple OS porting
2. Fixed Ad-hoc ping failed in noisy environment. (Probe Response has too
    many retry packet then cause "not enough space in MgmtRing")
3. Fixed WPA(2)PSK issue when group cipher of AP is WEP40 or WEP104.
4. Modified iwpriv ra0 get_site_survey:
	In scan list result: Security shows "NONE" when AP is OPEN/NONE,
	shows "WEP" when AP is OPEN/WEP or SHARED/WEP, shows
	"WPAPSK(WPA2PSK)/TKIP(AES)" when AP is WPAPSK(WPA2PSK)/TKIP(AES)
	shows "WPA(WPA2)/TKIP(AES)" when AP is WPA(WPA2)/TKIP(AES)
5. Support kthread.
6. Add New A band channel list region 15 contains the whole channels in
   the A band region 4 and the new CE channel 167,169,171,173
7. Add New IEEE802.11r functionality.
8. Fixed WPA2-Enterprise failed when AP reboot or turn off then turn on.
9. Fixed STA cannot connect to 11B only AP when the setting of is PHY_11GN.


From the RT2870 driver release note:

[V2.1.0.0]
1. New generation schema for multiple OS porting.
2. Fixed Ad-hoc ping failed in noisy environment. (Probe Response has too
   many retry packet then cause "not enough space in MgmtRing").
3. Fixed WPS failed with D-Link DIR-628 in 5GHz.
4. Change FastRoaming in DAT file to AutoRoaming.
5. Support kthread.
6. Add New A band channel list region 15 contains the whole channels in
   the A band region and the new CE channel 167,169,171,173.
7. New IEEE802.11r functionality.


From the RT3070 driver release note:

Version V2.1.1.0
       1. Linux kernel 2.6.29 support.
       2. Fix eFuse write from BIN file bug.

Version 2.1.0.0
       1. New generation schema for multiple OS porting
       2. Fixed Ad-hoc ping failed in noisy environment.
       3. Modified iwpriv ra0 get_site_survey:
       4. Change FastRoaming in DAT file to AutoRoaming.
       5. Support kthread.
       6. New IEEE802.11r functionality.


Tested with RT2860 and RT3070 chipsets.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 47 insertions, 23 deletions

diff --git a/drivers/staging/rt2860/common/cmm_sync.c b/drivers/staging/rt2860/common/cmm_sync.c
index a6e1b6ddfe57..4cb507dbeca1 100644
--- a/drivers/staging/rt2860/common/cmm_sync.c
+++ b/drivers/staging/rt2860/common/cmm_sync.c
@@ -25,7 +25,7 @@
  *************************************************************************
 
 	Module Name:
-	sync.c
+	cmm_sync.c
 
 	Abstract:
 
@@ -64,11 +64,16 @@ UCHAR A_BAND_REGION_3_CHANNEL_LIST[]={52, 56, 60, 64, 149, 153, 157, 161};
 UCHAR A_BAND_REGION_4_CHANNEL_LIST[]={149, 153, 157, 161, 165};
 UCHAR A_BAND_REGION_5_CHANNEL_LIST[]={149, 153, 157, 161};
 UCHAR A_BAND_REGION_6_CHANNEL_LIST[]={36, 40, 44, 48};
-UCHAR A_BAND_REGION_7_CHANNEL_LIST[]={36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165};
+UCHAR A_BAND_REGION_7_CHANNEL_LIST[]={36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165, 169, 173};
 UCHAR A_BAND_REGION_8_CHANNEL_LIST[]={52, 56, 60, 64};
 UCHAR A_BAND_REGION_9_CHANNEL_LIST[]={36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 132, 136, 140, 149, 153, 157, 161, 165};
 UCHAR A_BAND_REGION_10_CHANNEL_LIST[]={36, 40, 44, 48, 149, 153, 157, 161, 165};
 UCHAR A_BAND_REGION_11_CHANNEL_LIST[]={36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 149, 153, 157, 161};
+UCHAR A_BAND_REGION_12_CHANNEL_LIST[]={36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140};
+UCHAR A_BAND_REGION_13_CHANNEL_LIST[]={52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161};
+UCHAR A_BAND_REGION_14_CHANNEL_LIST[]={36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 136, 140, 149, 153, 157, 161, 165};
+UCHAR A_BAND_REGION_15_CHANNEL_LIST[]={149, 153, 157, 161, 165, 169, 173};
+
 
 //BaSizeArray follows the 802.11n definition as MaxRxFactor.  2^(13+factor) bytes. When factor =0, it's about Ba buffer size =8.
 UCHAR BaSizeArray[4] = {8,16,32,64};
@@ -200,7 +205,22 @@ VOID BuildChannelList(
 				num = sizeof(A_BAND_REGION_11_CHANNEL_LIST)/sizeof(UCHAR);
 				pChannelList = A_BAND_REGION_11_CHANNEL_LIST;
 				break;
-
+			case REGION_12_A_BAND:
+				num = sizeof(A_BAND_REGION_12_CHANNEL_LIST)/sizeof(UCHAR);
+				pChannelList = A_BAND_REGION_12_CHANNEL_LIST;
+				break;
+			case REGION_13_A_BAND:
+				num = sizeof(A_BAND_REGION_13_CHANNEL_LIST)/sizeof(UCHAR);
+				pChannelList = A_BAND_REGION_13_CHANNEL_LIST;
+				break;
+			case REGION_14_A_BAND:
+				num = sizeof(A_BAND_REGION_14_CHANNEL_LIST)/sizeof(UCHAR);
+				pChannelList = A_BAND_REGION_14_CHANNEL_LIST;
+				break;
+			case REGION_15_A_BAND:
+				num = sizeof(A_BAND_REGION_15_CHANNEL_LIST)/sizeof(UCHAR);
+				pChannelList = A_BAND_REGION_15_CHANNEL_LIST;
+				break;
 			default:            // Error. should never happen
 				DBGPRINT(RT_DEBUG_WARN,("countryregion=%d not support", pAd->CommonCfg.CountryRegionForABand));
 				break;
@@ -383,8 +403,11 @@ VOID ScanNextChannel(
 	PHEADER_802_11  pHdr80211;
 	UINT			ScanTimeIn5gChannel = SHORT_CHANNEL_TIME;
 
+	{
 	if (MONITOR_ON(pAd))
 		return;
+	}
+
 
 	if (pAd->MlmeAux.Channel == 0)
 	{
@@ -409,6 +432,19 @@ VOID ScanNextChannel(
 		}
 
 		{
+#ifdef RT2860
+			/*
+				If all peer Ad-hoc clients leave, driver would do LinkDown and LinkUp.
+				In LinkUp, CommonCfg.Ssid would copy SSID from MlmeAux.
+				To prevent SSID is zero or wrong in Beacon, need to recover MlmeAux.SSID here.
+			*/
+			if (ADHOC_ON(pAd))
+			{
+				NdisZeroMemory(pAd->MlmeAux.Ssid, MAX_LEN_OF_SSID);
+				pAd->MlmeAux.SsidLen = pAd->CommonCfg.SsidLen;
+				NdisMoveMemory(pAd->MlmeAux.Ssid, pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen);
+			}
+#endif // RT2860 //
 			//
 			// To prevent data lost.
 			// Send an NULL data with turned PSM bit on to current associated AP before SCAN progress.
@@ -438,29 +474,26 @@ VOID ScanNextChannel(
 			MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status);
 		}
 
+
 		RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
 	}
-#ifdef RT2870
+#ifdef RTMP_MAC_USB
 	else if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST) && (pAd->OpMode == OPMODE_STA))
 	{
 		pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
 		MlmeCntlConfirm(pAd, MT2_SCAN_CONF, MLME_FAIL_NO_RESOURCE);
 	}
-#endif // RT2870 //
+#endif // RTMP_MAC_USB //
 	else
 	{
 		{
 		// BBP and RF are not accessible in PS mode, we has to wake them up first
 		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
-#ifdef RT2860
-				AsicForceWakeup(pAd, FROM_TX);
-#endif
-#ifdef RT2870
 			AsicForceWakeup(pAd, TRUE);
-#endif
+
 			// leave PSM during scanning. otherwise we may lost ProbeRsp & BEACON
 			if (pAd->StaCfg.Psm == PWR_SAVE)
-				MlmeSetPsmBit(pAd, PWR_ACTIVE);
+				RTMP_SET_PSM_BIT(pAd, PWR_ACTIVE);
 		}
 
 		AsicSwitchChannel(pAd, pAd->MlmeAux.Channel, TRUE);
@@ -487,16 +520,6 @@ VOID ScanNextChannel(
 		// Chnage the channel scan time for CISCO stuff based on its IAPP announcement
 		if (ScanType == FAST_SCAN_ACTIVE)
 			RTMPSetTimer(&pAd->MlmeAux.ScanTimer, FAST_ACTIVE_SCAN_TIME);
-		else if (((ScanType == SCAN_CISCO_ACTIVE) ||
-				(ScanType == SCAN_CISCO_PASSIVE) ||
-				(ScanType == SCAN_CISCO_CHANNEL_LOAD) ||
-				(ScanType == SCAN_CISCO_NOISE)) && (pAd->OpMode == OPMODE_STA))
-		{
-			if (pAd->StaCfg.CCXScanTime < 25)
-				RTMPSetTimer(&pAd->MlmeAux.ScanTimer, pAd->StaCfg.CCXScanTime * 2);
-			else
-				RTMPSetTimer(&pAd->MlmeAux.ScanTimer, pAd->StaCfg.CCXScanTime);
-		}
 		else // must be SCAN_PASSIVE or SCAN_ACTIVE
 		{
 			if ((pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED)
@@ -512,8 +535,9 @@ VOID ScanNextChannel(
 				RTMPSetTimer(&pAd->MlmeAux.ScanTimer, MAX_CHANNEL_TIME);
 		}
 
-		if ((ScanType == SCAN_ACTIVE) || (ScanType == FAST_SCAN_ACTIVE) ||
-			(ScanType == SCAN_CISCO_ACTIVE))
+		if ((ScanType == SCAN_ACTIVE)
+			|| (ScanType == FAST_SCAN_ACTIVE)
+			)
 		{
 			NStatus = MlmeAllocateMemory(pAd, &pOutBuffer);  //Get an unused nonpaged memory
 			if (NStatus != NDIS_STATUS_SUCCESS)