Staging: rt2860: remove dead RALINK_ATE code

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

6 files changed, 1 insertions, 314 deletions

diff --git a/drivers/staging/rt2860/common/action.c b/drivers/staging/rt2860/common/action.c
index d6f530fb857f..ef648ac4c4d8 100644
--- a/drivers/staging/rt2860/common/action.c
+++ b/drivers/staging/rt2860/common/action.c
@@ -881,11 +881,6 @@ VOID ORIBATimerTimeout(
 	INT			i, total;
 	UCHAR			TID;
 
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 	total = pAd->MacTab.Size * NUM_OF_TID;
 
 	for (i = 1; ((i <MAX_LEN_OF_BA_ORI_TABLE) && (total > 0)) ; i++)
diff --git a/drivers/staging/rt2860/common/ba_action.c b/drivers/staging/rt2860/common/ba_action.c
index ce2e2623fb11..4b3f6da5aeda 100644
--- a/drivers/staging/rt2860/common/ba_action.c
+++ b/drivers/staging/rt2860/common/ba_action.c
@@ -1092,12 +1092,6 @@ VOID BAOriSessionSetupTimeout(
 	}
 #endif // CONFIG_STA_SUPPORT //
 
-#ifdef RALINK_ATE
-	// Nothing to do in ATE mode.
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 	pEntry = &pAd->MacTab.Content[pBAEntry->Wcid];
 
 	if ((pBAEntry->ORI_BA_Status == Originator_WaitRes) && (pBAEntry->Token < ORI_SESSION_MAX_RETRY))
diff --git a/drivers/staging/rt2860/common/cmm_data.c b/drivers/staging/rt2860/common/cmm_data.c
index b3f88f52af7c..5b74a7152e56 100644
--- a/drivers/staging/rt2860/common/cmm_data.c
+++ b/drivers/staging/rt2860/common/cmm_data.c
@@ -1771,85 +1771,6 @@ BOOLEAN  RTMPFreeTXDUponTxDmaDone(
 	RTMP_IO_READ32(pAd, TX_DTX_IDX0 + QueIdx * RINGREG_DIFF, &pTxRing->TxDmaIdx);
 	while (pTxRing->TxSwFreeIdx != pTxRing->TxDmaIdx)
 	{
-#ifdef RALINK_ATE
-#ifdef RALINK_28xx_QA
-		PHEADER_802_11	pHeader80211;
-
-		if ((ATE_ON(pAd)) && (pAd->ate.bQATxStart == TRUE))
-		{
-			if (pAd->ate.QID == QueIdx)
-			{
-				pAd->ate.TxDoneCount++;
-				//pAd->ate.Repeat++;
-				pAd->RalinkCounters.KickTxCount++;
-
-				/* always use QID_AC_BE and FIFO_EDCA */
-				ASSERT(pAd->ate.QID == 0);
-				pAd->ate.TxAc0++;
-
-				FREE++;
-#ifndef RT_BIG_ENDIAN
-				pTxD = (PTXD_STRUC) (pTxRing->Cell[pTxRing->TxSwFreeIdx].AllocVa);
-				pOriTxD = pTxD;
-		        NdisMoveMemory(&TxD, pTxD, sizeof(TXD_STRUC));
-				pTxD = &TxD;
-#else
-		        pDestTxD = (PTXD_STRUC) (pTxRing->Cell[pTxRing->TxSwFreeIdx].AllocVa);
-		        pOriTxD = pDestTxD ;
-		        TxD = *pDestTxD;
-		        pTxD = &TxD;
-		        RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-#endif
-				pTxD->DMADONE = 0;
-
-				pHeader80211 = pTxRing->Cell[pTxRing->TxSwFreeIdx].DmaBuf.AllocVa + sizeof(TXWI_STRUC);
-#ifdef RT_BIG_ENDIAN
-				RTMPFrameEndianChange(pAd, (PUCHAR)pHeader80211, DIR_READ, FALSE);
-#endif
-				pHeader80211->Sequence = ++pAd->ate.seq;
-#ifdef RT_BIG_ENDIAN
-				RTMPFrameEndianChange(pAd, (PUCHAR)pHeader80211, DIR_WRITE, FALSE);
-#endif
-
-				if  ((pAd->ate.bQATxStart == TRUE) && (pAd->ate.Mode & ATE_TXFRAME) && (pAd->ate.TxDoneCount < pAd->ate.TxCount))
-				{
-					pAd->RalinkCounters.TransmittedByteCount +=  (pTxD->SDLen1 + pTxD->SDLen0);
-					pAd->RalinkCounters.OneSecDmaDoneCount[QueIdx] ++;
-					INC_RING_INDEX(pTxRing->TxSwFreeIdx, TX_RING_SIZE);
-					/* get tx_tdx_idx again */
-					RTMP_IO_READ32(pAd, TX_DTX_IDX0 + QueIdx * RINGREG_DIFF ,  &pTxRing->TxDmaIdx);
-					goto kick_out;
-				}
-				else if ((pAd->ate.TxStatus == 1)/* or (pAd->ate.bQATxStart == TRUE) ??? */ && (pAd->ate.TxDoneCount == pAd->ate.TxCount))//<========================PETER
-				{
-					DBGPRINT(RT_DEBUG_TRACE,("all Tx is done\n"));
-					// Tx status enters idle mode.
-					pAd->ate.TxStatus = 0;
-				}
-				else if (!(pAd->ate.Mode & ATE_TXFRAME))
-				{
-					/* not complete sending yet, but someone press the Stop TX botton. */
-					DBGPRINT(RT_DEBUG_ERROR,("not complete sending yet, but someone pressed the Stop TX bottom\n"));
-					DBGPRINT(RT_DEBUG_ERROR,("pAd->ate.Mode = 0x%02x\n", pAd->ate.Mode));
-				}
-				else
-				{
-					DBGPRINT(RT_DEBUG_OFF,("pTxRing->TxSwFreeIdx = %d\n", pTxRing->TxSwFreeIdx));
-  				}
-#ifndef RT_BIG_ENDIAN
-	        	NdisMoveMemory(pOriTxD, pTxD, sizeof(TXD_STRUC));
-#else
-        		RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-        		*pDestTxD = TxD;
-#endif // RT_BIG_ENDIAN //
-
-				INC_RING_INDEX(pTxRing->TxSwFreeIdx, TX_RING_SIZE);
-				continue;
-			}
-		}
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
 		// static rate also need NICUpdateFifoStaCounters() function.
 		//if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))
 			NICUpdateFifoStaCounters(pAd);
@@ -1871,11 +1792,6 @@ BOOLEAN  RTMPFreeTXDUponTxDmaDone(
 
 		pTxD->DMADONE = 0;
 
-
-#ifdef RALINK_ATE
-		/* Execution of this block is not allowed when ATE is running. */
-		if (!(ATE_ON(pAd)))
-#endif // RALINK_ATE //
 /*====================================================================*/
 		{
 			pPacket = pTxRing->Cell[pTxRing->TxSwFreeIdx].pNdisPacket;
@@ -1921,53 +1837,6 @@ BOOLEAN  RTMPFreeTXDUponTxDmaDone(
 #else
         NdisMoveMemory(pOriTxD, pTxD, sizeof(TXD_STRUC));
 #endif
-
-#ifdef RALINK_ATE
-#ifdef RALINK_28xx_QA
-kick_out:
-#endif // RALINK_28xx_QA //
-
-		//
-		// ATE_TXCONT mode also need to send some normal frames, so let it in.
-		// ATE_STOP must be changed not to be 0xff
-		// to prevent it from running into this block.
-		//
-		if ((pAd->ate.Mode & ATE_TXFRAME) && (pAd->ate.QID == QueIdx))
-		{
-			// TxDoneCount++ has been done if QA is used.
-			if (pAd->ate.bQATxStart == FALSE)
-			{
-				pAd->ate.TxDoneCount++;
-			}
-			if (((pAd->ate.TxCount - pAd->ate.TxDoneCount + 1) >= TX_RING_SIZE))
-			{
-				/* Note : We increase TxCpuIdx here, not TxSwFreeIdx ! */
-				INC_RING_INDEX(pAd->TxRing[QueIdx].TxCpuIdx, TX_RING_SIZE);
-#ifndef RT_BIG_ENDIAN//<==========================PETER
-				pTxD = (PTXD_STRUC) (pTxRing->Cell[pAd->TxRing[QueIdx].TxCpuIdx].AllocVa);
-				pOriTxD = pTxD;
-		        NdisMoveMemory(&TxD, pTxD, sizeof(TXD_STRUC));
-				pTxD = &TxD;
-#else
-		        pDestTxD = (PTXD_STRUC) (pTxRing->Cell[pAd->TxRing[QueIdx].TxCpuIdx].AllocVa);
-		        pOriTxD = pDestTxD ;
-		        TxD = *pDestTxD;
-		        pTxD = &TxD;
-		        RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-#endif
-				pTxD->DMADONE = 0;
-#ifndef RT_BIG_ENDIAN//<==========================PETER
-        		NdisMoveMemory(pOriTxD, pTxD, sizeof(TXD_STRUC));
-#else
-        		RTMPDescriptorEndianChange((PUCHAR)pTxD, TYPE_TXD);
-        		*pDestTxD = TxD;
-#endif
-				// kick Tx-Ring.
-				RTMP_IO_WRITE32(pAd, TX_CTX_IDX0 + QueIdx * RINGREG_DIFF, pAd->TxRing[QueIdx].TxCpuIdx);
-				pAd->RalinkCounters.KickTxCount++;
-			}
-		}
-#endif // RALINK_ATE //
 	}
 
 
diff --git a/drivers/staging/rt2860/common/cmm_sync.c b/drivers/staging/rt2860/common/cmm_sync.c
index d29e0b630e2e..1e88d36f7618 100644
--- a/drivers/staging/rt2860/common/cmm_sync.c
+++ b/drivers/staging/rt2860/common/cmm_sync.c
@@ -397,12 +397,6 @@ VOID ScanNextChannel(
 	}
 #endif // CONFIG_STA_SUPPORT //
 
-#ifdef RALINK_ATE
-	// Nothing to do in ATE mode.
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 	if (pAd->MlmeAux.Channel == 0)
 	{
 		if ((pAd->CommonCfg.BBPCurrentBW == BW_40)
diff --git a/drivers/staging/rt2860/common/mlme.c b/drivers/staging/rt2860/common/mlme.c
index 1cb941c8b8a1..e3ff74393d4c 100644
--- a/drivers/staging/rt2860/common/mlme.c
+++ b/drivers/staging/rt2860/common/mlme.c
@@ -589,14 +589,6 @@ VOID MlmeHandler(
 			break;
 		}
 
-#ifdef RALINK_ATE
-		if(ATE_ON(pAd))
-		{
-			DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now in MlmeHandler\n"));
-			break;
-		}
-#endif // RALINK_ATE //
-
 		//From message type, determine which state machine I should drive
 		if (MlmeDequeue(&pAd->Mlme.Queue, &Elem))
 		{
@@ -906,18 +898,6 @@ VOID MlmePeriodicExec(
 
 	RT28XX_MLME_PRE_SANITY_CHECK(pAd);
 
-#ifdef RALINK_ATE
-	/* Do not show RSSI until "Normal 1 second Mlme PeriodicExec". */
-	if (ATE_ON(pAd))
-	{
-		if (pAd->Mlme.PeriodicRound % MLME_TASK_EXEC_MULTIPLE != (MLME_TASK_EXEC_MULTIPLE - 1))
-	{
-			pAd->Mlme.PeriodicRound ++;
-			return;
-		}
-	}
-#endif // RALINK_ATE //
-
 #ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
@@ -971,30 +951,6 @@ VOID MlmePeriodicExec(
 	{
                 pAd->Mlme.OneSecPeriodicRound ++;
 
-#ifdef RALINK_ATE
-    	if (ATE_ON(pAd))
-    	{
-			/* request from Baron : move this routine from later to here */
-			/* for showing Rx error count in ATE RXFRAME */
-            NICUpdateRawCounters(pAd);
-			if (pAd->ate.bRxFer == 1)
-			{
-				pAd->ate.RxTotalCnt += pAd->ate.RxCntPerSec;
-			    ate_print(KERN_EMERG "MlmePeriodicExec: Rx packet cnt = %d/%d\n", pAd->ate.RxCntPerSec, pAd->ate.RxTotalCnt);
-				pAd->ate.RxCntPerSec = 0;
-
-				if (pAd->ate.RxAntennaSel == 0)
-					ate_print(KERN_EMERG "MlmePeriodicExec: Rx AvgRssi0=%d, AvgRssi1=%d, AvgRssi2=%d\n\n",
-						pAd->ate.AvgRssi0, pAd->ate.AvgRssi1, pAd->ate.AvgRssi2);
-				else
-					ate_print(KERN_EMERG "MlmePeriodicExec: Rx AvgRssi=%d\n\n", pAd->ate.AvgRssi0);
-			}
-			MlmeResetRalinkCounters(pAd);
-			return;
-    	}
-#endif // RALINK_ATE //
-
-
 		if (rx_Total)
 		{
 
@@ -1103,17 +1059,6 @@ VOID STAMlmePeriodicExec(
 {
 	ULONG			    TxTotalCnt;
 
-//
-// We return here in ATE mode, because the statistics
-// that ATE needs are not collected via this routine.
-//
-#ifdef RALINK_ATE
-	// It is supposed that we will never reach here in ATE mode.
-	ASSERT(!(ATE_ON(pAd)));
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 #ifdef WPA_SUPPLICANT_SUPPORT
     if (pAd->StaCfg.WpaSupplicantUP == WPA_SUPPLICANT_DISABLE)
 #endif // WPA_SUPPLICANT_SUPPORT //
@@ -2127,13 +2072,6 @@ VOID MlmeDynamicTxRateSwitching(
 	ULONG					TxRetransmit = 0, TxSuccess = 0, TxFailCount = 0;
 	MAC_TABLE_ENTRY			*pEntry;
 
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-	{
-		return;
-	}
-#endif // RALINK_ATE //
-
 	/*if (pAd->Antenna.field.RxPath > 1)
 		Rssi = (pAd->StaCfg.RssiSample.AvgRssi0 + pAd->StaCfg.RssiSample.AvgRssi1) >> 1;
 	else
@@ -4922,12 +4860,6 @@ BOOLEAN MlmeEnqueueForRecv(
 	INT		 MsgType;
 	MLME_QUEUE	*Queue = (MLME_QUEUE *)&pAd->Mlme.Queue;
 
-#ifdef RALINK_ATE
-	/* Nothing to do in ATE mode */
-	if(ATE_ON(pAd))
-		return FALSE;
-#endif // RALINK_ATE //
-
 	// Do nothing if the driver is starting halt state.
 	// This might happen when timer already been fired before cancel timer with mlmehalt
 	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST))
@@ -5634,11 +5566,6 @@ VOID 	AsicUpdateProtect(
 	UCHAR			i;
 	UINT32 MacReg = 0;
 
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 #ifdef DOT11_N_SUPPORT
 	if (!(pAd->CommonCfg.bHTProtect) && (OperationMode != 8))
 	{
@@ -7596,9 +7523,7 @@ BOOLEAN AsicSendCommandToMcu(
 	HOST_CMD_CSR_STRUC	H2MCmd;
 	H2M_MAILBOX_STRUC	H2MMailbox;
 	ULONG				i = 0;
-#ifdef RALINK_ATE
-	static UINT32 j = 0;
-#endif // RALINK_ATE //
+
 	do
 	{
 		RTMP_IO_READ32(pAd, H2M_MAILBOX_CSR, &H2MMailbox.word);
@@ -7610,30 +7535,6 @@ BOOLEAN AsicSendCommandToMcu(
 
 	if (i >= 100)
 	{
-#ifdef RALINK_ATE
-		if (pAd->ate.bFWLoading == TRUE)
-		{
-			/* reloading firmware when received iwpriv cmd "ATE=ATESTOP" */
-			if (j > 0)
-			{
-				if (j % 64 != 0)
-				{
-					DBGPRINT(RT_DEBUG_ERROR, ("#"));
-				}
-				else
-				{
-					DBGPRINT(RT_DEBUG_ERROR, ("\n"));
-				}
-				++j;
-			}
-			else if (j == 0)
-			{
-				DBGPRINT(RT_DEBUG_ERROR, ("Loading firmware. Please wait for a moment...\n"));
-				++j;
-			}
-		}
-		else
-#endif // RALINK_ATE //
 		{
 			UINT32 Data;
 
@@ -7661,16 +7562,6 @@ BOOLEAN AsicSendCommandToMcu(
 		//return FALSE;
 	}
 
-#ifdef RALINK_ATE
-	else if (pAd->ate.bFWLoading == TRUE)
-	{
-		/* reloading of firmware is completed */
-		pAd->ate.bFWLoading = FALSE;
-		DBGPRINT(RT_DEBUG_ERROR, ("\n"));
-		j = 0;
-	}
-#endif // RALINK_ATE //
-
 	H2MMailbox.field.Owner	  = 1;	   // pass ownership to MCU
 	H2MMailbox.field.CmdToken = Token;
 	H2MMailbox.field.HighByte = Arg1;
@@ -8126,12 +8017,6 @@ VOID AsicEvaluateRxAnt(
 {
 	UCHAR	BBPR3 = 0;
 
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-
 #ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
@@ -8211,12 +8096,6 @@ VOID AsicRxAntEvalTimeout(
 	CHAR			larger = -127, rssi0, rssi1, rssi2;
 #endif // CONFIG_STA_SUPPORT //
 
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
-
 #ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
diff --git a/drivers/staging/rt2860/common/rtmp_init.c b/drivers/staging/rt2860/common/rtmp_init.c
index 320a50ae9b55..1351e65b3a89 100644
--- a/drivers/staging/rt2860/common/rtmp_init.c
+++ b/drivers/staging/rt2860/common/rtmp_init.c
@@ -2214,12 +2214,6 @@ VOID NICUpdateFifoStaCounters(
 	CHAR				reTry;
 	UCHAR				succMCS;
 
-#ifdef RALINK_ATE
-	/* Nothing to do in ATE mode */
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 		do
 		{
 			RTMP_IO_READ32(pAd, TX_STA_FIFO, &StaFifo.word);
@@ -3171,37 +3165,6 @@ VOID	UserCfgInit(
 	InitializeQueueHeader(&pAd->MacTab.McastPsQueue);
 	NdisAllocateSpinLock(&pAd->MacTabLock);
 
-#ifdef RALINK_ATE
-	NdisZeroMemory(&pAd->ate, sizeof(ATE_INFO));
-	pAd->ate.Mode = ATE_STOP;
-	pAd->ate.TxCount = 200;/* to exceed TX_RING_SIZE ... */
-	pAd->ate.TxLength = 1024;
-	pAd->ate.TxWI.ShortGI = 0;// LONG GI : 800 ns
-	pAd->ate.TxWI.PHYMODE = MODE_CCK;
-	pAd->ate.TxWI.MCS = 3;
-	pAd->ate.TxWI.BW = BW_20;
-	pAd->ate.Channel = 1;
-	pAd->ate.QID = QID_AC_BE;
-	pAd->ate.Addr1[0] = 0x00;
-	pAd->ate.Addr1[1] = 0x11;
-	pAd->ate.Addr1[2] = 0x22;
-	pAd->ate.Addr1[3] = 0xAA;
-	pAd->ate.Addr1[4] = 0xBB;
-	pAd->ate.Addr1[5] = 0xCC;
-	NdisMoveMemory(pAd->ate.Addr2, pAd->ate.Addr1, ETH_LENGTH_OF_ADDRESS);
-	NdisMoveMemory(pAd->ate.Addr3, pAd->ate.Addr1, ETH_LENGTH_OF_ADDRESS);
-	pAd->ate.bRxFer = 0;
-	pAd->ate.bQATxStart = FALSE;
-	pAd->ate.bQARxStart = FALSE;
-	pAd->ate.bFWLoading = FALSE;
-#ifdef RALINK_28xx_QA
-	//pAd->ate.Repeat = 0;
-	pAd->ate.TxStatus = 0;
-	pAd->ate.AtePid = THREAD_PID_INIT_VALUE;
-#endif // RALINK_28xx_QA //
-#endif // RALINK_ATE //
-
-
 	pAd->CommonCfg.bWiFiTest = FALSE;
 	pAd->bPCIclkOff = FALSE;
 
@@ -3472,13 +3435,6 @@ VOID RTMPSetLED(
 	UCHAR			HighByte = 0;
 	UCHAR			LowByte;
 
-// In ATE mode of RT2860 AP/STA, we have erased 8051 firmware.
-// So LED mode is not supported when ATE is running.
-#ifdef RALINK_ATE
-	if (ATE_ON(pAd))
-		return;
-#endif // RALINK_ATE //
-
 	LowByte = pAd->LedCntl.field.LedMode&0x7f;
 	switch (Status)
 	{