serial: exar: Move Commtech adapters to 8250_exar as well

Those are Exar-based, too.

With the required refactoring of the code to fit into 8250_exar, we
automatically fix the same issue pci_xr17v35x_setup had before: 8XMODE,
FCTL, TXTRG and RXTRG were always only set for port 0. Now they are
initialized for the correct target port by using port.membase.

Now we can also cleanly fix the blacklist of 8250_pci so that all
Commtech devices are rejected and 8250_exar can handle them.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 1 insertions, 138 deletions

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 2c83fd54b36c..d2bdcef7d759 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1610,67 +1610,6 @@ static int pci_eg20t_init(struct pci_dev *dev)
 #endif
 }
 
-#define UART_EXAR_MPIOINT_7_0	0x8f	/* MPIOINT[7:0] */
-#define UART_EXAR_MPIOLVL_7_0	0x90	/* MPIOLVL[7:0] */
-#define UART_EXAR_MPIO3T_7_0	0x91	/* MPIO3T[7:0] */
-#define UART_EXAR_MPIOINV_7_0	0x92	/* MPIOINV[7:0] */
-#define UART_EXAR_MPIOSEL_7_0	0x93	/* MPIOSEL[7:0] */
-#define UART_EXAR_MPIOOD_7_0	0x94	/* MPIOOD[7:0] */
-#define UART_EXAR_MPIOINT_15_8	0x95	/* MPIOINT[15:8] */
-#define UART_EXAR_MPIOLVL_15_8	0x96	/* MPIOLVL[15:8] */
-#define UART_EXAR_MPIO3T_15_8	0x97	/* MPIO3T[15:8] */
-#define UART_EXAR_MPIOINV_15_8	0x98	/* MPIOINV[15:8] */
-#define UART_EXAR_MPIOSEL_15_8	0x99	/* MPIOSEL[15:8] */
-#define UART_EXAR_MPIOOD_15_8	0x9a	/* MPIOOD[15:8] */
-#define PCI_DEVICE_ID_COMMTECH_4222PCI335 0x0004
-#define PCI_DEVICE_ID_COMMTECH_4224PCI335 0x0002
-#define PCI_DEVICE_ID_COMMTECH_2324PCI335 0x000a
-#define PCI_DEVICE_ID_COMMTECH_2328PCI335 0x000b
-
-static int
-pci_fastcom335_setup(struct serial_private *priv,
-		  const struct pciserial_board *board,
-		  struct uart_8250_port *port, int idx)
-{
-	u8 __iomem *p;
-
-	p = pci_ioremap_bar(priv->dev, 0);
-	if (p == NULL)
-		return -ENOMEM;
-
-	port->port.flags |= UPF_EXAR_EFR;
-
-	/*
-	 * Setup Multipurpose Input/Output pins.
-	 */
-	if (idx == 0) {
-		switch (priv->dev->device) {
-		case PCI_DEVICE_ID_COMMTECH_4222PCI335:
-		case PCI_DEVICE_ID_COMMTECH_4224PCI335:
-			writeb(0x78, p + UART_EXAR_MPIOLVL_7_0);
-			writeb(0x00, p + UART_EXAR_MPIOINV_7_0);
-			writeb(0x00, p + UART_EXAR_MPIOSEL_7_0);
-			break;
-		case PCI_DEVICE_ID_COMMTECH_2324PCI335:
-		case PCI_DEVICE_ID_COMMTECH_2328PCI335:
-			writeb(0x00, p + UART_EXAR_MPIOLVL_7_0);
-			writeb(0xc0, p + UART_EXAR_MPIOINV_7_0);
-			writeb(0xc0, p + UART_EXAR_MPIOSEL_7_0);
-			break;
-		}
-		writeb(0x00, p + UART_EXAR_MPIOINT_7_0);
-		writeb(0x00, p + UART_EXAR_MPIO3T_7_0);
-		writeb(0x00, p + UART_EXAR_MPIOOD_7_0);
-	}
-	writeb(0x00, p + UART_EXAR_8XMODE);
-	writeb(UART_FCTR_EXAR_TRGD, p + UART_EXAR_FCTR);
-	writeb(32, p + UART_EXAR_TXTRG);
-	writeb(32, p + UART_EXAR_RXTRG);
-	iounmap(p);
-
-	return pci_default_setup(priv, board, port, idx);
-}
-
 static int
 pci_wch_ch353_setup(struct serial_private *priv,
 		    const struct pciserial_board *board,
@@ -2431,38 +2370,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.setup		= pci_asix_setup,
 	},
 	/*
-	 * Commtech, Inc. Fastcom adapters
-	 *
-	 */
-	{
-		.vendor = PCI_VENDOR_ID_COMMTECH,
-		.device = PCI_DEVICE_ID_COMMTECH_4222PCI335,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.setup		= pci_fastcom335_setup,
-	},
-	{
-		.vendor = PCI_VENDOR_ID_COMMTECH,
-		.device = PCI_DEVICE_ID_COMMTECH_4224PCI335,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.setup		= pci_fastcom335_setup,
-	},
-	{
-		.vendor = PCI_VENDOR_ID_COMMTECH,
-		.device = PCI_DEVICE_ID_COMMTECH_2324PCI335,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.setup		= pci_fastcom335_setup,
-	},
-	{
-		.vendor = PCI_VENDOR_ID_COMMTECH,
-		.device = PCI_DEVICE_ID_COMMTECH_2328PCI335,
-		.subvendor	= PCI_ANY_ID,
-		.subdevice	= PCI_ANY_ID,
-		.setup		= pci_fastcom335_setup,
-	},
-	/*
 	 * Broadcom TruManage (NetXtreme)
 	 */
 	{
@@ -2573,10 +2480,6 @@ enum pci_board_num_t {
 
 	pbn_b0_4_1152000,
 
-	pbn_b0_2_1152000_200,
-	pbn_b0_4_1152000_200,
-	pbn_b0_8_1152000_200,
-
 	pbn_b0_4_1250000,
 
 	pbn_b0_2_1843200,
@@ -2780,27 +2683,6 @@ static struct pciserial_board pci_boards[] = {
 		.uart_offset	= 8,
 	},
 
-	[pbn_b0_2_1152000_200] = {
-		.flags		= FL_BASE0,
-		.num_ports	= 2,
-		.base_baud	= 1152000,
-		.uart_offset	= 0x200,
-	},
-
-	[pbn_b0_4_1152000_200] = {
-		.flags		= FL_BASE0,
-		.num_ports	= 4,
-		.base_baud	= 1152000,
-		.uart_offset	= 0x200,
-	},
-
-	[pbn_b0_8_1152000_200] = {
-		.flags		= FL_BASE0,
-		.num_ports	= 8,
-		.base_baud	= 1152000,
-		.uart_offset	= 0x200,
-	},
-
 	[pbn_b0_4_1250000] = {
 		.flags		= FL_BASE0,
 		.num_ports	= 4,
@@ -3521,6 +3403,7 @@ static const struct pci_device_id blacklist[] = {
 
 	/* Exar devices */
 	{ PCI_VDEVICE(EXAR, PCI_ANY_ID), },
+	{ PCI_VDEVICE(COMMTECH, PCI_ANY_ID), },
 };
 
 /*
@@ -5248,26 +5131,6 @@ static struct pci_device_id serial_pci_tbl[] = {
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0, pbn_wch384_4 },
 
-	/*
-	 * Commtech, Inc. Fastcom adapters
-	 */
-	{	PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4222PCI335,
-		PCI_ANY_ID, PCI_ANY_ID,
-		0,
-		0, pbn_b0_2_1152000_200 },
-	{	PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_4224PCI335,
-		PCI_ANY_ID, PCI_ANY_ID,
-		0,
-		0, pbn_b0_4_1152000_200 },
-	{	PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_2324PCI335,
-		PCI_ANY_ID, PCI_ANY_ID,
-		0,
-		0, pbn_b0_4_1152000_200 },
-	{	PCI_VENDOR_ID_COMMTECH, PCI_DEVICE_ID_COMMTECH_2328PCI335,
-		PCI_ANY_ID, PCI_ANY_ID,
-		0,
-		0, pbn_b0_8_1152000_200 },
-
 	/* Fintek PCI serial cards */
 	{ PCI_DEVICE(0x1c29, 0x1104), .driver_data = pbn_fintek_4 },
 	{ PCI_DEVICE(0x1c29, 0x1108), .driver_data = pbn_fintek_8 },