summaryrefslogtreecommitdiff
path: root/drivers/usb/core
diff options
context:
space:
mode:
authorDan Williams <dan.j.williams@intel.com>2014-05-20 18:09:15 -0700
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2014-05-27 16:51:50 -0700
commitaf376a461cf075de6358255579c8d42bb1246e18 (patch)
treeb1f6e07252726796e18689c44ac11cd6096fc4c0 /drivers/usb/core
parent6908058469e3253637894d1cb3e2581870c77e1d (diff)
usb: refactor port handling in hub_events()
In preparation for synchronizing port handling with pm_runtime transitions refactor port handling into its own subroutine. We expect that clearing some status flags will be required regardless of the port state, so handle those first and group all non-trivial actions at the bottom of the routine. This also splits off the bottom half of hub_port_connect_change() into hub_port_reconnect() in prepartion for introducing a port->status_lock. hub_port_reconnect() will expect the port lock to not be held while hub_port_connect_change() expects to enter with it held. Other cleanups include: 1/ reflowing to 80 columns 2/ replacing redundant usages of 'hub->hdev' with 'hdev' 3/ consolidate clearing of ->change_bits() in hub_port_connect_change 4/ consolidate calls to usb_reset_device Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/core')
-rw-r--r--drivers/usb/core/hub.c374
1 files changed, 185 insertions, 189 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index e492bca74425..782ce2e31c7f 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -4413,66 +4413,15 @@ hub_power_remaining (struct usb_hub *hub)
return remaining;
}
-/* Handle physical or logical connection change events.
- * This routine is called when:
- * a port connection-change occurs;
- * a port enable-change occurs (often caused by EMI);
- * usb_reset_and_verify_device() encounters changed descriptors (as from
- * a firmware download)
- * caller already locked the hub
- */
-static void hub_port_connect_change(struct usb_hub *hub, int port1,
- u16 portstatus, u16 portchange)
+static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
+ u16 portchange)
{
+ int status, i;
+ unsigned unit_load;
struct usb_device *hdev = hub->hdev;
struct usb_hcd *hcd = bus_to_hcd(hdev->bus);
struct usb_port *port_dev = hub->ports[port1 - 1];
- struct usb_device *udev;
- int status, i;
- unsigned unit_load;
-
- dev_dbg(&port_dev->dev, "status %04x, change %04x, %s\n",
- portstatus, portchange, portspeed(hub, portstatus));
-
- if (hub->has_indicators) {
- set_port_led(hub, port1, HUB_LED_AUTO);
- hub->indicator[port1-1] = INDICATOR_AUTO;
- }
-
-#ifdef CONFIG_USB_OTG
- /* during HNP, don't repeat the debounce */
- if (hdev->bus->is_b_host)
- portchange &= ~(USB_PORT_STAT_C_CONNECTION |
- USB_PORT_STAT_C_ENABLE);
-#endif
-
- /* Try to resuscitate an existing device */
- udev = port_dev->child;
- if ((portstatus & USB_PORT_STAT_CONNECTION) && udev &&
- udev->state != USB_STATE_NOTATTACHED) {
- usb_lock_device(udev);
- if (portstatus & USB_PORT_STAT_ENABLE) {
- status = 0; /* Nothing to do */
-
-#ifdef CONFIG_PM_RUNTIME
- } else if (udev->state == USB_STATE_SUSPENDED &&
- udev->persist_enabled) {
- /* For a suspended device, treat this as a
- * remote wakeup event.
- */
- status = usb_remote_wakeup(udev);
-#endif
-
- } else {
- status = -ENODEV; /* Don't resuscitate */
- }
- usb_unlock_device(udev);
-
- if (status == 0) {
- clear_bit(port1, hub->change_bits);
- return;
- }
- }
+ struct usb_device *udev = port_dev->child;
/* Disconnect any existing devices under this port */
if (udev) {
@@ -4481,7 +4430,6 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
usb_phy_notify_disconnect(hcd->phy, udev->speed);
usb_disconnect(&port_dev->child);
}
- clear_bit(port1, hub->change_bits);
/* We can forget about a "removed" device when there's a physical
* disconnect or the connect status changes.
@@ -4663,6 +4611,65 @@ done:
hub_port_disable(hub, port1, 1);
if (hcd->driver->relinquish_port && !hub->hdev->parent)
hcd->driver->relinquish_port(hcd, port1);
+
+}
+
+/* Handle physical or logical connection change events.
+ * This routine is called when:
+ * a port connection-change occurs;
+ * a port enable-change occurs (often caused by EMI);
+ * usb_reset_and_verify_device() encounters changed descriptors (as from
+ * a firmware download)
+ * caller already locked the hub
+ */
+static void hub_port_connect_change(struct usb_hub *hub, int port1,
+ u16 portstatus, u16 portchange)
+{
+ struct usb_port *port_dev = hub->ports[port1 - 1];
+ struct usb_device *udev = port_dev->child;
+ int status = -ENODEV;
+
+ dev_dbg(&port_dev->dev, "status %04x, change %04x, %s\n", portstatus,
+ portchange, portspeed(hub, portstatus));
+
+ if (hub->has_indicators) {
+ set_port_led(hub, port1, HUB_LED_AUTO);
+ hub->indicator[port1-1] = INDICATOR_AUTO;
+ }
+
+#ifdef CONFIG_USB_OTG
+ /* during HNP, don't repeat the debounce */
+ if (hub->hdev->bus->is_b_host)
+ portchange &= ~(USB_PORT_STAT_C_CONNECTION |
+ USB_PORT_STAT_C_ENABLE);
+#endif
+
+ /* Try to resuscitate an existing device */
+ if ((portstatus & USB_PORT_STAT_CONNECTION) && udev &&
+ udev->state != USB_STATE_NOTATTACHED) {
+ if (portstatus & USB_PORT_STAT_ENABLE) {
+ status = 0; /* Nothing to do */
+#ifdef CONFIG_PM_RUNTIME
+ } else if (udev->state == USB_STATE_SUSPENDED &&
+ udev->persist_enabled) {
+ /* For a suspended device, treat this as a
+ * remote wakeup event.
+ */
+ usb_lock_device(udev);
+ status = usb_remote_wakeup(udev);
+ usb_unlock_device(udev);
+#endif
+ } else {
+ /* Don't resuscitate */;
+ }
+
+ }
+ clear_bit(port1, hub->change_bits);
+
+ if (status == 0)
+ return;
+
+ hub_port_connect(hub, port1, portstatus, portchange);
}
/* Returns 1 if there was a remote wakeup and a connect status change. */
@@ -4705,6 +4712,121 @@ static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port,
return connect_change;
}
+static void port_event(struct usb_hub *hub, int port1)
+{
+ int connect_change, reset_device = 0;
+ struct usb_port *port_dev = hub->ports[port1 - 1];
+ struct usb_device *udev = port_dev->child;
+ struct usb_device *hdev = hub->hdev;
+ u16 portstatus, portchange;
+
+ connect_change = test_bit(port1, hub->change_bits);
+ clear_bit(port1, hub->event_bits);
+ clear_bit(port1, hub->wakeup_bits);
+
+ if (hub_port_status(hub, port1, &portstatus, &portchange) < 0)
+ return;
+
+ if (portchange & USB_PORT_STAT_C_CONNECTION) {
+ usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION);
+ connect_change = 1;
+ }
+
+ if (portchange & USB_PORT_STAT_C_ENABLE) {
+ if (!connect_change)
+ dev_dbg(&port_dev->dev, "enable change, status %08x\n",
+ portstatus);
+ usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE);
+
+ /*
+ * EM interference sometimes causes badly shielded USB devices
+ * to be shutdown by the hub, this hack enables them again.
+ * Works at least with mouse driver.
+ */
+ if (!(portstatus & USB_PORT_STAT_ENABLE)
+ && !connect_change && udev) {
+ dev_err(&port_dev->dev, "disabled by hub (EMI?), re-enabling...\n");
+ connect_change = 1;
+ }
+ }
+
+ if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
+ u16 status = 0, unused;
+
+ dev_dbg(&port_dev->dev, "over-current change\n");
+ usb_clear_port_feature(hdev, port1,
+ USB_PORT_FEAT_C_OVER_CURRENT);
+ msleep(100); /* Cool down */
+ hub_power_on(hub, true);
+ hub_port_status(hub, port1, &status, &unused);
+ if (status & USB_PORT_STAT_OVERCURRENT)
+ dev_err(&port_dev->dev, "over-current condition\n");
+ }
+
+ if (portchange & USB_PORT_STAT_C_RESET) {
+ dev_dbg(&port_dev->dev, "reset change\n");
+ usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_RESET);
+ }
+ if ((portchange & USB_PORT_STAT_C_BH_RESET)
+ && hub_is_superspeed(hdev)) {
+ dev_dbg(&port_dev->dev, "warm reset change\n");
+ usb_clear_port_feature(hdev, port1,
+ USB_PORT_FEAT_C_BH_PORT_RESET);
+ }
+ if (portchange & USB_PORT_STAT_C_LINK_STATE) {
+ dev_dbg(&port_dev->dev, "link state change\n");
+ usb_clear_port_feature(hdev, port1,
+ USB_PORT_FEAT_C_PORT_LINK_STATE);
+ }
+ if (portchange & USB_PORT_STAT_C_CONFIG_ERROR) {
+ dev_warn(&port_dev->dev, "config error\n");
+ usb_clear_port_feature(hdev, port1,
+ USB_PORT_FEAT_C_PORT_CONFIG_ERROR);
+ }
+
+ if (hub_handle_remote_wakeup(hub, port1, portstatus, portchange))
+ connect_change = 1;
+
+ /*
+ * Warm reset a USB3 protocol port if it's in
+ * SS.Inactive state.
+ */
+ if (hub_port_warm_reset_required(hub, portstatus)) {
+ dev_dbg(&port_dev->dev, "do warm reset\n");
+ if (!udev || !(portstatus & USB_PORT_STAT_CONNECTION)
+ || udev->state == USB_STATE_NOTATTACHED) {
+ if (hub_port_reset(hub, port1, NULL,
+ HUB_BH_RESET_TIME, true) < 0)
+ hub_port_disable(hub, port1, 1);
+ } else
+ reset_device = 1;
+ }
+
+ /*
+ * On disconnect USB3 protocol ports transit from U0 to
+ * SS.Inactive to Rx.Detect. If this happens a warm-
+ * reset is not needed, but a (re)connect may happen
+ * before khubd runs and sees the disconnect, and the
+ * device may be an unknown state.
+ *
+ * If the port went through SS.Inactive without khubd
+ * seeing it the C_LINK_STATE change flag will be set,
+ * and we reset the dev to put it in a known state.
+ */
+ if (reset_device || (udev && hub_is_superspeed(hub->hdev)
+ && (portchange & USB_PORT_STAT_C_LINK_STATE)
+ && (portstatus & USB_PORT_STAT_CONNECTION))) {
+ usb_lock_device(udev);
+ usb_reset_device(udev);
+ usb_unlock_device(udev);
+ connect_change = 0;
+ }
+
+ if (connect_change)
+ hub_port_connect_change(hub, port1, portstatus, portchange);
+}
+
+
static void hub_events(void)
{
struct list_head *tmp;
@@ -4714,10 +4836,7 @@ static void hub_events(void)
struct device *hub_dev;
u16 hubstatus;
u16 hubchange;
- u16 portstatus;
- u16 portchange;
int i, ret;
- int connect_change, wakeup_change;
/*
* We restart the list every time to avoid a deadlock with
@@ -4791,135 +4910,12 @@ static void hub_events(void)
/* deal with port status changes */
for (i = 1; i <= hdev->maxchild; i++) {
- struct usb_port *port_dev = hub->ports[i - 1];
- struct usb_device *udev = port_dev->child;
-
- if (test_bit(i, hub->busy_bits))
- continue;
- connect_change = test_bit(i, hub->change_bits);
- wakeup_change = test_and_clear_bit(i, hub->wakeup_bits);
- if (!test_and_clear_bit(i, hub->event_bits) &&
- !connect_change && !wakeup_change)
- continue;
-
- ret = hub_port_status(hub, i,
- &portstatus, &portchange);
- if (ret < 0)
- continue;
-
- if (portchange & USB_PORT_STAT_C_CONNECTION) {
- usb_clear_port_feature(hdev, i,
- USB_PORT_FEAT_C_CONNECTION);
- connect_change = 1;
- }
-
- if (portchange & USB_PORT_STAT_C_ENABLE) {
- if (!connect_change)
- dev_dbg(&port_dev->dev,
- "enable change, status %08x\n",
- portstatus);
- usb_clear_port_feature(hdev, i,
- USB_PORT_FEAT_C_ENABLE);
-
- /*
- * EM interference sometimes causes badly
- * shielded USB devices to be shutdown by
- * the hub, this hack enables them again.
- * Works at least with mouse driver.
- */
- if (!(portstatus & USB_PORT_STAT_ENABLE)
- && !connect_change && udev) {
- dev_err(&port_dev->dev,
- "disabled by hub (EMI?), re-enabling...\n");
- connect_change = 1;
- }
- }
-
- if (hub_handle_remote_wakeup(hub, i,
- portstatus, portchange))
- connect_change = 1;
-
- if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
- u16 status = 0;
- u16 unused;
-
- dev_dbg(&port_dev->dev, "over-current change\n");
- usb_clear_port_feature(hdev, i,
- USB_PORT_FEAT_C_OVER_CURRENT);
- msleep(100); /* Cool down */
- hub_power_on(hub, true);
- hub_port_status(hub, i, &status, &unused);
- if (status & USB_PORT_STAT_OVERCURRENT)
- dev_err(&port_dev->dev,
- "over-current condition\n");
- }
-
- if (portchange & USB_PORT_STAT_C_RESET) {
- dev_dbg(&port_dev->dev, "reset change\n");
- usb_clear_port_feature(hdev, i,
- USB_PORT_FEAT_C_RESET);
- }
- if ((portchange & USB_PORT_STAT_C_BH_RESET) &&
- hub_is_superspeed(hub->hdev)) {
- dev_dbg(&port_dev->dev, "warm reset change\n");
- usb_clear_port_feature(hdev, i,
- USB_PORT_FEAT_C_BH_PORT_RESET);
- }
- if (portchange & USB_PORT_STAT_C_LINK_STATE) {
- usb_clear_port_feature(hub->hdev, i,
- USB_PORT_FEAT_C_PORT_LINK_STATE);
- }
- if (portchange & USB_PORT_STAT_C_CONFIG_ERROR) {
- dev_warn(&port_dev->dev, "config error\n");
- usb_clear_port_feature(hub->hdev, i,
- USB_PORT_FEAT_C_PORT_CONFIG_ERROR);
- }
-
- /* Warm reset a USB3 protocol port if it's in
- * SS.Inactive state.
- */
- if (hub_port_warm_reset_required(hub, portstatus)) {
- int status;
-
- dev_dbg(&port_dev->dev, "warm reset\n");
- if (!udev ||
- !(portstatus & USB_PORT_STAT_CONNECTION) ||
- udev->state == USB_STATE_NOTATTACHED) {
- status = hub_port_reset(hub, i,
- NULL, HUB_BH_RESET_TIME,
- true);
- if (status < 0)
- hub_port_disable(hub, i, 1);
- } else {
- usb_lock_device(udev);
- status = usb_reset_device(udev);
- usb_unlock_device(udev);
- connect_change = 0;
- }
- /*
- * On disconnect USB3 protocol ports transit from U0 to
- * SS.Inactive to Rx.Detect. If this happens a warm-
- * reset is not needed, but a (re)connect may happen
- * before khubd runs and sees the disconnect, and the
- * device may be an unknown state.
- *
- * If the port went through SS.Inactive without khubd
- * seeing it the C_LINK_STATE change flag will be set,
- * and we reset the dev to put it in a known state.
- */
- } else if (udev && hub_is_superspeed(hub->hdev) &&
- (portchange & USB_PORT_STAT_C_LINK_STATE) &&
- (portstatus & USB_PORT_STAT_CONNECTION)) {
- usb_lock_device(udev);
- usb_reset_device(udev);
- usb_unlock_device(udev);
- connect_change = 0;
- }
-
- if (connect_change)
- hub_port_connect_change(hub, i,
- portstatus, portchange);
- } /* end for i */
+ if (!test_bit(i, hub->busy_bits)
+ && (test_bit(i, hub->event_bits)
+ || test_bit(i, hub->change_bits)
+ || test_bit(i, hub->wakeup_bits)))
+ port_event(hub, i);
+ }
/* deal with hub status changes */
if (test_and_clear_bit(0, hub->event_bits) == 0)