diff options
author | Otavio Salvador <otavio@ossystems.com.br> | 2019-12-19 00:14:33 -0300 |
---|---|---|
committer | GitHub <noreply@github.com> | 2019-12-19 00:14:33 -0300 |
commit | fa8a03bec68d9ef89da72277bd3501ed3daa6217 (patch) | |
tree | 3d3218332bcb34cb0afa01d6ad996058a3dbcb77 /drivers/usb/dwc3/gadget.c | |
parent | 6b774eec1f9d3064e9b33634dfa99d5666d0a73a (diff) | |
parent | 1ddf624b0b268fdc0b80b1de618b98f8d117afea (diff) |
Merge pull request #55 from toradex/4.14-2.0.x-imx
4.14 2.0.x imx
Diffstat (limited to 'drivers/usb/dwc3/gadget.c')
-rw-r--r-- | drivers/usb/dwc3/gadget.c | 35 |
1 files changed, 23 insertions, 12 deletions
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 58db28453494..707646b95d25 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -282,27 +282,36 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd, * is not enough. */ u32 timeout = 20000; + u32 saved_config = 0; u32 reg; int cmd_status = 0; - int susphy = false; int ret = -EINVAL; /* - * Synopsys Databook 2.60a states, on section 6.3.2.5.[1-8], that if - * we're issuing an endpoint command, we must check if - * GUSB2PHYCFG.SUSPHY bit is set. If it is, then we need to clear it. + * When operating in USB 2.0 speeds (HS/FS), if GUSB2PHYCFG.ENBLSLPM or + * GUSB2PHYCFG.SUSPHY is set, it must be cleared before issuing an + * endpoint command. * - * We will also set SUSPHY bit to what it was before returning as stated - * by the same section on Synopsys databook. + * Save and clear both GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY + * settings. Restore them after the command is completed. + * + * DWC_usb3 3.30a and DWC_usb31 1.90a programming guide section 3.2.2 */ if (dwc->gadget.speed <= USB_SPEED_HIGH) { reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) { - susphy = true; + saved_config |= DWC3_GUSB2PHYCFG_SUSPHY; reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); } + + if (reg & DWC3_GUSB2PHYCFG_ENBLSLPM) { + saved_config |= DWC3_GUSB2PHYCFG_ENBLSLPM; + reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; + } + + if (saved_config) + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); } if (DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_STARTTRANSFER) { @@ -400,9 +409,9 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd, } } - if (unlikely(susphy)) { + if (saved_config) { reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - reg |= DWC3_GUSB2PHYCFG_SUSPHY; + reg |= saved_config; dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); } @@ -2039,7 +2048,8 @@ static void dwc3_gadget_set_speed(struct usb_gadget *g, * STAR#9000525659: Clock Domain Crossing on DCTL in * USB 2.0 Mode */ - if (dwc->revision < DWC3_REVISION_220A) { + if (dwc->revision < DWC3_REVISION_220A && + !dwc->dis_metastability_quirk) { reg |= DWC3_DCFG_SUPERSPEED; } else { switch (speed) { @@ -3279,7 +3289,8 @@ int dwc3_gadget_init(struct dwc3 *dwc) * is less than super speed because we don't have means, yet, to tell * composite.c that we are USB 2.0 + LPM ECN. */ - if (dwc->revision < DWC3_REVISION_220A) + if (dwc->revision < DWC3_REVISION_220A && + !dwc->dis_metastability_quirk) dev_info(dwc->dev, "changing max_speed on rev %08x\n", dwc->revision); |