diff options
| author | Alan Stern <stern@rowland.harvard.edu> | 2011-07-05 12:34:05 -0400 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@suse.de> | 2011-07-08 14:55:08 -0700 |
| commit | 004c19682884d4f40000ce1ded53f4a1d0b18206 (patch) | |
| tree | 646596c61f27983145b753549cc946e488c2a613 /drivers/usb/host/ehci.h | |
| parent | 0c42a4e84502533ec40544324debe2a62836ae11 (diff) | |
USB: EHCI: go back to using the system clock for QH unlinks
This patch (as1477) fixes a problem affecting a few types of EHCI
controller. Contrary to what one might expect, these controllers
automatically stop their internal frame counter when no ports are
enabled. Since ehci-hcd currently relies on the frame counter for
determining when it should unlink QHs from the async schedule, those
controllers run into trouble: The frame counter stops and the QHs
never get unlinked.
Some systems have also experienced other problems traced back to
commit b963801164618e25fbdc0cd452ce49c3628b46c8 (USB: ehci-hcd unlink
speedups), which made the original switch from using the system clock
to using the frame counter. It never became clear what the reason was
for these problems, but evidently it is related to use of the frame
counter.
To fix all these problems, this patch more or less reverts that commit
and goes back to using the system clock. But this can't be done
cleanly because other changes have since been made to the scan_async()
subroutine. One of these changes involved the tricky logic that tries
to avoid rescanning QHs that have already been seen when the scanning
loop is restarted, which happens whenever an URB is given back.
Switching back to clock-based unlinks would make this logic even more
complicated.
Therefore the new code doesn't rescan the entire async list whenever a
giveback occurs. Instead it rescans only the current QH and continues
on from there. This requires the use of a separate pointer to keep
track of the next QH to scan, since the current QH may be unlinked
while the scanning is in progress. That new pointer must be global,
so that it can be adjusted forward whenever the _next_ QH gets
unlinked. (uhci-hcd uses this same trick.)
Simplification of the scanning loop removes a level of indentation,
which accounts for the size of the patch. The amount of code changed
is relatively small, and it isn't exactly a reversion of the
b963801164 commit.
This fixes Bugzilla #32432.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@kernel.org>
Tested-by: Matej Kenda <matejken@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb/host/ehci.h')
| -rw-r--r-- | drivers/usb/host/ehci.h | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index fa3129fe1ee0..e4feec3457fb 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -75,6 +75,7 @@ struct ehci_hcd { /* one per controller */ struct ehci_qh *async; struct ehci_qh *dummy; /* For AMD quirk use */ struct ehci_qh *reclaim; + struct ehci_qh *qh_scan_next; unsigned scanning : 1; /* periodic schedule support */ @@ -119,7 +120,6 @@ struct ehci_hcd { /* one per controller */ struct timer_list iaa_watchdog; struct timer_list watchdog; unsigned long actions; - unsigned stamp; unsigned periodic_stamp; unsigned random_frame; unsigned long next_statechange; @@ -345,6 +345,7 @@ struct ehci_qh { struct ehci_qh *reclaim; /* next to reclaim */ struct ehci_hcd *ehci; + unsigned long unlink_time; /* * Do NOT use atomic operations for QH refcounting. On some CPUs |