summaryrefslogtreecommitdiff
path: root/drivers/usb/musb/ux500.c
diff options
context:
space:
mode:
authorFabio Baltieri <fabio.baltieri@linaro.org>2013-03-08 10:27:06 +0800
committerFelipe Balbi <balbi@ti.com>2013-03-18 14:41:32 +0200
commit996a9d26d37c7dca27b7e9830a49daa74a2603b7 (patch)
tree684b7b3225b2537f388baecb2c3f8b68c67712c1 /drivers/usb/musb/ux500.c
parent399e0f4f00adbfdea2122c1daec0d4015f56cc7a (diff)
usb: musb: ux500: implement musb_set_vbus
Add ux500_musb_set_vbus() implementation for ux500. This is based on the version originally developed inside ST-Ericsson. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> [ balbi@ti.com: fix a build error due to missing otg_state_string() ] Signed-off-by: Felipe Balbi <balbi@ti.com>
Diffstat (limited to 'drivers/usb/musb/ux500.c')
-rw-r--r--drivers/usb/musb/ux500.c64
1 files changed, 64 insertions, 0 deletions
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index 13a392913769..0332fcd286f7 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -36,6 +36,68 @@ struct ux500_glue {
};
#define glue_to_musb(g) platform_get_drvdata(g->musb)
+static void ux500_musb_set_vbus(struct musb *musb, int is_on)
+{
+ u8 devctl;
+ unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+ /* HDRC controls CPEN, but beware current surges during device
+ * connect. They can trigger transient overcurrent conditions
+ * that must be ignored.
+ */
+
+ devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+
+ if (is_on) {
+ if (musb->xceiv->state == OTG_STATE_A_IDLE) {
+ /* start the session */
+ devctl |= MUSB_DEVCTL_SESSION;
+ musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+ /*
+ * Wait for the musb to set as A device to enable the
+ * VBUS
+ */
+ while (musb_readb(musb->mregs, MUSB_DEVCTL) & 0x80) {
+
+ if (time_after(jiffies, timeout)) {
+ dev_err(musb->controller,
+ "configured as A device timeout");
+ break;
+ }
+ }
+
+ } else {
+ musb->is_active = 1;
+ musb->xceiv->otg->default_a = 1;
+ musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
+ devctl |= MUSB_DEVCTL_SESSION;
+ MUSB_HST_MODE(musb);
+ }
+ } else {
+ musb->is_active = 0;
+
+ /* NOTE: we're skipping A_WAIT_VFALL -> A_IDLE and jumping
+ * right to B_IDLE...
+ */
+ musb->xceiv->otg->default_a = 0;
+ devctl &= ~MUSB_DEVCTL_SESSION;
+ MUSB_DEV_MODE(musb);
+ }
+ musb_writeb(musb->mregs, MUSB_DEVCTL, devctl);
+
+ /*
+ * Devctl values will be updated after vbus goes below
+ * session_valid. The time taken depends on the capacitance
+ * on VBUS line. The max discharge time can be upto 1 sec
+ * as per the spec. Typically on our platform, it is 200ms
+ */
+ if (!is_on)
+ mdelay(200);
+
+ dev_dbg(musb->controller, "VBUS %s, devctl %02x\n",
+ usb_otg_state_string(musb->xceiv->state),
+ musb_readb(musb->mregs, MUSB_DEVCTL));
+}
+
static irqreturn_t ux500_musb_interrupt(int irq, void *__hci)
{
unsigned long flags;
@@ -79,6 +141,8 @@ static int ux500_musb_exit(struct musb *musb)
static const struct musb_platform_ops ux500_ops = {
.init = ux500_musb_init,
.exit = ux500_musb_exit,
+
+ .set_vbus = ux500_musb_set_vbus,
};
static int ux500_probe(struct platform_device *pdev)