summaryrefslogtreecommitdiff
path: root/drivers/video/skeletonfb.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/video/skeletonfb.c
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/video/skeletonfb.c')
-rw-r--r--drivers/video/skeletonfb.c684
1 files changed, 684 insertions, 0 deletions
diff --git a/drivers/video/skeletonfb.c b/drivers/video/skeletonfb.c
new file mode 100644
index 000000000000..7b43716ab665
--- /dev/null
+++ b/drivers/video/skeletonfb.c
@@ -0,0 +1,684 @@
+/*
+ * linux/drivers/video/skeletonfb.c -- Skeleton for a frame buffer device
+ *
+ * Modified to new api Jan 2001 by James Simmons (jsimmons@transvirtual.com)
+ *
+ * Created 28 Dec 1997 by Geert Uytterhoeven
+ *
+ *
+ * I have started rewriting this driver as a example of the upcoming new API
+ * The primary goal is to remove the console code from fbdev and place it
+ * into fbcon.c. This reduces the code and makes writing a new fbdev driver
+ * easy since the author doesn't need to worry about console internals. It
+ * also allows the ability to run fbdev without a console/tty system on top
+ * of it.
+ *
+ * First the roles of struct fb_info and struct display have changed. Struct
+ * display will go away. The way the the new framebuffer console code will
+ * work is that it will act to translate data about the tty/console in
+ * struct vc_data to data in a device independent way in struct fb_info. Then
+ * various functions in struct fb_ops will be called to store the device
+ * dependent state in the par field in struct fb_info and to change the
+ * hardware to that state. This allows a very clean separation of the fbdev
+ * layer from the console layer. It also allows one to use fbdev on its own
+ * which is a bounus for embedded devices. The reason this approach works is
+ * for each framebuffer device when used as a tty/console device is allocated
+ * a set of virtual terminals to it. Only one virtual terminal can be active
+ * per framebuffer device. We already have all the data we need in struct
+ * vc_data so why store a bunch of colormaps and other fbdev specific data
+ * per virtual terminal.
+ *
+ * As you can see doing this makes the con parameter pretty much useless
+ * for struct fb_ops functions, as it should be. Also having struct
+ * fb_var_screeninfo and other data in fb_info pretty much eliminates the
+ * need for get_fix and get_var. Once all drivers use the fix, var, and cmap
+ * fbcon can be written around these fields. This will also eliminate the
+ * need to regenerate struct fb_var_screeninfo, struct fb_fix_screeninfo
+ * struct fb_cmap every time get_var, get_fix, get_cmap functions are called
+ * as many drivers do now.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+
+ /*
+ * This is just simple sample code.
+ *
+ * No warranty that it actually compiles.
+ * Even less warranty that it actually works :-)
+ */
+
+/*
+ * If your driver supports multiple boards, you should make the
+ * below data types arrays, or allocate them dynamically (using kmalloc()).
+ */
+
+/*
+ * This structure defines the hardware state of the graphics card. Normally
+ * you place this in a header file in linux/include/video. This file usually
+ * also includes register information. That allows other driver subsystems
+ * and userland applications the ability to use the same header file to
+ * avoid duplicate work and easy porting of software.
+ */
+struct xxx_par;
+
+/*
+ * Here we define the default structs fb_fix_screeninfo and fb_var_screeninfo
+ * if we don't use modedb. If we do use modedb see xxxfb_init how to use it
+ * to get a fb_var_screeninfo. Otherwise define a default var as well.
+ */
+static struct fb_fix_screeninfo xxxfb_fix __initdata = {
+ .id = "FB's name",
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_PSEUDOCOLOR,
+ .xpanstep = 1,
+ .ypanstep = 1,
+ .ywrapstep = 1,
+ .accel = FB_ACCEL_NONE,
+};
+
+ /*
+ * Modern graphical hardware not only supports pipelines but some
+ * also support multiple monitors where each display can have its
+ * its own unique data. In this case each display could be
+ * represented by a separate framebuffer device thus a separate
+ * struct fb_info. Now the struct xxx_par represents the graphics
+ * hardware state thus only one exist per card. In this case the
+ * struct xxx_par for each graphics card would be shared between
+ * every struct fb_info that represents a framebuffer on that card.
+ * This allows when one display changes it video resolution (info->var)
+ * the other displays know instantly. Each display can always be
+ * aware of the entire hardware state that affects it because they share
+ * the same xxx_par struct. The other side of the coin is multiple
+ * graphics cards that pass data around until it is finally displayed
+ * on one monitor. Such examples are the voodoo 1 cards and high end
+ * NUMA graphics servers. For this case we have a bunch of pars, each
+ * one that represents a graphics state, that belong to one struct
+ * fb_info. Their you would want to have *par point to a array of device
+ * states and have each struct fb_ops function deal with all those
+ * states. I hope this covers every possible hardware design. If not
+ * feel free to send your ideas at jsimmons@users.sf.net
+ */
+
+ /*
+ * If your driver supports multiple boards or it supports multiple
+ * framebuffers, you should make these arrays, or allocate them
+ * dynamically (using kmalloc()).
+ */
+static struct fb_info info;
+
+ /*
+ * Each one represents the state of the hardware. Most hardware have
+ * just one hardware state. These here represent the default state(s).
+ */
+static struct xxx_par __initdata current_par;
+
+int xxxfb_init(void);
+int xxxfb_setup(char*);
+
+/**
+ * xxxfb_open - Optional function. Called when the framebuffer is
+ * first accessed.
+ * @info: frame buffer structure that represents a single frame buffer
+ * @user: tell us if the userland (value=1) or the console is accessing
+ * the framebuffer.
+ *
+ * This function is the first function called in the framebuffer api.
+ * Usually you don't need to provide this function. The case where it
+ * is used is to change from a text mode hardware state to a graphics
+ * mode state.
+ *
+ * Returns negative errno on error, or zero on success.
+ */
+static int xxxfb_open(const struct fb_info *info, int user)
+{
+ return 0;
+}
+
+/**
+ * xxxfb_release - Optional function. Called when the framebuffer
+ * device is closed.
+ * @info: frame buffer structure that represents a single frame buffer
+ * @user: tell us if the userland (value=1) or the console is accessing
+ * the framebuffer.
+ *
+ * Thus function is called when we close /dev/fb or the framebuffer
+ * console system is released. Usually you don't need this function.
+ * The case where it is usually used is to go from a graphics state
+ * to a text mode state.
+ *
+ * Returns negative errno on error, or zero on success.
+ */
+static int xxxfb_release(const struct fb_info *info, int user)
+{
+ return 0;
+}
+
+/**
+ * xxxfb_check_var - Optional function. Validates a var passed in.
+ * @var: frame buffer variable screen structure
+ * @info: frame buffer structure that represents a single frame buffer
+ *
+ * Checks to see if the hardware supports the state requested by
+ * var passed in. This function does not alter the hardware state!!!
+ * This means the data stored in struct fb_info and struct xxx_par do
+ * not change. This includes the var inside of struct fb_info.
+ * Do NOT change these. This function can be called on its own if we
+ * intent to only test a mode and not actually set it. The stuff in
+ * modedb.c is a example of this. If the var passed in is slightly
+ * off by what the hardware can support then we alter the var PASSED in
+ * to what we can do. If the hardware doesn't support mode change
+ * a -EINVAL will be returned by the upper layers. You don't need to
+ * implement this function then. If you hardware doesn't support
+ * changing the resolution then this function is not needed. In this
+ * case the driver woudl just provide a var that represents the static
+ * state the screen is in.
+ *
+ * Returns negative errno on error, or zero on success.
+ */
+static int xxxfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ const struct xxx_par *par = (const struct xxx_par *) info->par;
+ /* ... */
+ return 0;
+}
+
+/**
+ * xxxfb_set_par - Optional function. Alters the hardware state.
+ * @info: frame buffer structure that represents a single frame buffer
+ *
+ * Using the fb_var_screeninfo in fb_info we set the resolution of the
+ * this particular framebuffer. This function alters the par AND the
+ * fb_fix_screeninfo stored in fb_info. It doesn't not alter var in
+ * fb_info since we are using that data. This means we depend on the
+ * data in var inside fb_info to be supported by the hardware.
+ * xxxfb_check_var is always called before xxxfb_set_par to ensure this.
+ * Again if you can't change the resolution you don't need this function.
+ *
+ * Returns negative errno on error, or zero on success.
+ */
+static int xxxfb_set_par(struct fb_info *info)
+{
+ struct xxx_par *par = (struct xxx_par *) info->par;
+ /* ... */
+ return 0;
+}
+
+/**
+ * xxxfb_setcolreg - Optional function. Sets a color register.
+ * @regno: Which register in the CLUT we are programming
+ * @red: The red value which can be up to 16 bits wide
+ * @green: The green value which can be up to 16 bits wide
+ * @blue: The blue value which can be up to 16 bits wide.
+ * @transp: If supported, the alpha value which can be up to 16 bits wide.
+ * @info: frame buffer info structure
+ *
+ * Set a single color register. The values supplied have a 16 bit
+ * magnitude which needs to be scaled in this function for the hardware.
+ * Things to take into consideration are how many color registers, if
+ * any, are supported with the current color visual. With truecolor mode
+ * no color palettes are supported. Here a pseudo palette is created
+ * which we store the value in pseudo_palette in struct fb_info. For
+ * pseudocolor mode we have a limited color palette. To deal with this
+ * we can program what color is displayed for a particular pixel value.
+ * DirectColor is similar in that we can program each color field. If
+ * we have a static colormap we don't need to implement this function.
+ *
+ * Returns negative errno on error, or zero on success.
+ */
+static int xxxfb_setcolreg(unsigned regno, unsigned red, unsigned green,
+ unsigned blue, unsigned transp,
+ const struct fb_info *info)
+{
+ if (regno >= 256) /* no. of hw registers */
+ return -EINVAL;
+ /*
+ * Program hardware... do anything you want with transp
+ */
+
+ /* grayscale works only partially under directcolor */
+ if (info->var.grayscale) {
+ /* grayscale = 0.30*R + 0.59*G + 0.11*B */
+ red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
+ }
+
+ /* Directcolor:
+ * var->{color}.offset contains start of bitfield
+ * var->{color}.length contains length of bitfield
+ * {hardwarespecific} contains width of DAC
+ * cmap[X] is programmed to (X << red.offset) | (X << green.offset) | (X << blue.offset)
+ * RAMDAC[X] is programmed to (red, green, blue)
+ *
+ * Pseudocolor:
+ * uses offset = 0 && length = DAC register width.
+ * var->{color}.offset is 0
+ * var->{color}.length contains widht of DAC
+ * cmap is not used
+ * DAC[X] is programmed to (red, green, blue)
+ * Truecolor:
+ * does not use RAMDAC (usually has 3 of them).
+ * var->{color}.offset contains start of bitfield
+ * var->{color}.length contains length of bitfield
+ * cmap is programmed to (red << red.offset) | (green << green.offset) |
+ * (blue << blue.offset) | (transp << transp.offset)
+ * RAMDAC does not exist
+ */
+#define CNVT_TOHW(val,width) ((((val)<<(width))+0x7FFF-(val))>>16)
+ switch (info->fix.visual) {
+ case FB_VISUAL_TRUECOLOR:
+ case FB_VISUAL_PSEUDOCOLOR:
+ red = CNVT_TOHW(red, info->var.red.length);
+ green = CNVT_TOHW(green, info->var.green.length);
+ blue = CNVT_TOHW(blue, info->var.blue.length);
+ transp = CNVT_TOHW(transp, info->var.transp.length);
+ break;
+ case FB_VISUAL_DIRECTCOLOR:
+ /* example here assumes 8 bit DAC. Might be different
+ * for your hardware */
+ red = CNVT_TOHW(red, 8);
+ green = CNVT_TOHW(green, 8);
+ blue = CNVT_TOHW(blue, 8);
+ /* hey, there is bug in transp handling... */
+ transp = CNVT_TOHW(transp, 8);
+ break;
+ }
+#undef CNVT_TOHW
+ /* Truecolor has hardware independent palette */
+ if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
+ u32 v;
+
+ if (regno >= 16)
+ return -EINVAL;
+
+ v = (red << info->var.red.offset) |
+ (green << info->var.green.offset) |
+ (blue << info->var.blue.offset) |
+ (transp << info->var.transp.offset);
+
+ switch (info->var.bits_per_pixel) {
+ case 8:
+ /* Yes some hand held devices have this. */
+ ((u8*)(info->pseudo_palette))[regno] = v;
+ break;
+ case 16:
+ ((u16*)(info->pseudo_palette))[regno] = v;
+ break;
+ case 24:
+ case 32:
+ ((u32*)(info->pseudo_palette))[regno] = v;
+ break;
+ }
+ return 0;
+ }
+ /* ... */
+ return 0;
+}
+
+/**
+ * xxxfb_pan_display - NOT a required function. Pans the display.
+ * @var: frame buffer variable screen structure
+ * @info: frame buffer structure that represents a single frame buffer
+ *
+ * Pan (or wrap, depending on the `vmode' field) the display using the
+ * `xoffset' and `yoffset' fields of the `var' structure.
+ * If the values don't fit, return -EINVAL.
+ *
+ * Returns negative errno on error, or zero on success.
+ */
+static int xxxfb_pan_display(struct fb_var_screeninfo *var,
+ const struct fb_info *info)
+{
+ /* ... */
+ return 0;
+}
+
+/**
+ * xxxfb_blank - NOT a required function. Blanks the display.
+ * @blank_mode: the blank mode we want.
+ * @info: frame buffer structure that represents a single frame buffer
+ *
+ * Blank the screen if blank_mode != 0, else unblank. Return 0 if
+ * blanking succeeded, != 0 if un-/blanking failed due to e.g. a
+ * video mode which doesn't support it. Implements VESA suspend
+ * and powerdown modes on hardware that supports disabling hsync/vsync:
+ * blank_mode == 2: suspend vsync
+ * blank_mode == 3: suspend hsync
+ * blank_mode == 4: powerdown
+ *
+ * Returns negative errno on error, or zero on success.
+ *
+ */
+static int xxxfb_blank(int blank_mode, const struct fb_info *info)
+{
+ /* ... */
+ return 0;
+}
+
+/* ------------ Accelerated Functions --------------------- */
+
+/*
+ * We provide our own functions if we have hardware acceleration
+ * or non packed pixel format layouts. If we have no hardware
+ * acceleration, we can use a generic unaccelerated function. If using
+ * a pack pixel format just use the functions in cfb_*.c. Each file
+ * has one of the three different accel functions we support.
+ */
+
+/**
+ * xxxfb_fillrect - REQUIRED function. Can use generic routines if
+ * non acclerated hardware and packed pixel based.
+ * Draws a rectangle on the screen.
+ *
+ * @info: frame buffer structure that represents a single frame buffer
+ * @region: The structure representing the rectangular region we
+ * wish to draw to.
+ *
+ * This drawing operation places/removes a retangle on the screen
+ * depending on the rastering operation with the value of color which
+ * is in the current color depth format.
+ */
+void xxfb_fillrect(struct fb_info *p, const struct fb_fillrect *region)
+{
+/* Meaning of struct fb_fillrect
+ *
+ * @dx: The x and y corrdinates of the upper left hand corner of the
+ * @dy: area we want to draw to.
+ * @width: How wide the rectangle is we want to draw.
+ * @height: How tall the rectangle is we want to draw.
+ * @color: The color to fill in the rectangle with.
+ * @rop: The raster operation. We can draw the rectangle with a COPY
+ * of XOR which provides erasing effect.
+ */
+}
+
+/**
+ * xxxfb_copyarea - REQUIRED function. Can use generic routines if
+ * non acclerated hardware and packed pixel based.
+ * Copies one area of the screen to another area.
+ *
+ * @info: frame buffer structure that represents a single frame buffer
+ * @area: Structure providing the data to copy the framebuffer contents
+ * from one region to another.
+ *
+ * This drawing operation copies a rectangular area from one area of the
+ * screen to another area.
+ */
+void xxxfb_copyarea(struct fb_info *p, const struct fb_copyarea *area)
+{
+/*
+ * @dx: The x and y coordinates of the upper left hand corner of the
+ * @dy: destination area on the screen.
+ * @width: How wide the rectangle is we want to copy.
+ * @height: How tall the rectangle is we want to copy.
+ * @sx: The x and y coordinates of the upper left hand corner of the
+ * @sy: source area on the screen.
+ */
+}
+
+
+/**
+ * xxxfb_imageblit - REQUIRED function. Can use generic routines if
+ * non acclerated hardware and packed pixel based.
+ * Copies a image from system memory to the screen.
+ *
+ * @info: frame buffer structure that represents a single frame buffer
+ * @image: structure defining the image.
+ *
+ * This drawing operation draws a image on the screen. It can be a
+ * mono image (needed for font handling) or a color image (needed for
+ * tux).
+ */
+void xxxfb_imageblit(struct fb_info *p, const struct fb_image *image)
+{
+/*
+ * @dx: The x and y coordinates of the upper left hand corner of the
+ * @dy: destination area to place the image on the screen.
+ * @width: How wide the image is we want to copy.
+ * @height: How tall the image is we want to copy.
+ * @fg_color: For mono bitmap images this is color data for
+ * @bg_color: the foreground and background of the image to
+ * write directly to the frmaebuffer.
+ * @depth: How many bits represent a single pixel for this image.
+ * @data: The actual data used to construct the image on the display.
+ * @cmap: The colormap used for color images.
+ */
+}
+
+/**
+ * xxxfb_cursor - REQUIRED function. If your hardware lacks support
+ * for a cursor you can use the default cursor whose
+ * function is called soft_cursor. It will always
+ * work since it uses xxxfb_imageblit function which
+ * is required.
+ *
+ * @info: frame buffer structure that represents a single frame buffer
+ * @cursor: structure defining the cursor to draw.
+ *
+ * This operation is used to set or alter the properities of the
+ * cursor.
+ *
+ * Returns negative errno on error, or zero on success.
+ */
+int xxxfb_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+/*
+ * @set: Which fields we are altering in struct fb_cursor
+ * @enable: Disable or enable the cursor
+ * @rop: The bit operation we want to do.
+ * @mask: This is the cursor mask bitmap.
+ * @dest: A image of the area we are going to display the cursor.
+ * Used internally by the driver.
+ * @hot: The hot spot.
+ * @image: The actual data for the cursor image.
+ *
+ * NOTES ON FLAGS (cursor->set):
+ *
+ * FB_CUR_SETIMAGE - the cursor image has changed (cursor->image.data)
+ * FB_CUR_SETPOS - the cursor position has changed (cursor->image.dx|dy)
+ * FB_CUR_SETHOT - the cursor hot spot has changed (cursor->hot.dx|dy)
+ * FB_CUR_SETCMAP - the cursor colors has changed (cursor->fg_color|bg_color)
+ * FB_CUR_SETSHAPE - the cursor bitmask has changed (cursor->mask)
+ * FB_CUR_SETSIZE - the cursor size has changed (cursor->width|height)
+ * FB_CUR_SETALL - everything has changed
+ *
+ * NOTES ON ROPs (cursor->rop, Raster Operation)
+ *
+ * ROP_XOR - cursor->image.data XOR cursor->mask
+ * ROP_COPY - curosr->image.data AND cursor->mask
+ *
+ * OTHER NOTES:
+ *
+ * - fbcon only supports a 2-color cursor (cursor->image.depth = 1)
+ * - The fb_cursor structure, @cursor, _will_ always contain valid
+ * fields, whether any particular bitfields in cursor->set is set
+ * or not.
+ */
+}
+
+/**
+ * xxxfb_rotate - NOT a required function. If your hardware
+ * supports rotation the whole screen then
+ * you would provide a hook for this.
+ *
+ * @info: frame buffer structure that represents a single frame buffer
+ * @angle: The angle we rotate the screen.
+ *
+ * This operation is used to set or alter the properities of the
+ * cursor.
+ */
+void xxxfb_rotate(struct fb_info *info, int angle)
+{
+}
+
+/**
+ * xxxfb_poll - NOT a required function. The purpose of this
+ * function is to provide a way for some process
+ * to wait until a specific hardware event occurs
+ * for the framebuffer device.
+ *
+ * @info: frame buffer structure that represents a single frame buffer
+ * @wait: poll table where we store process that await a event.
+ */
+void xxxfb_poll(struct fb_info *info, poll_table *wait)
+{
+}
+
+/**
+ * xxxfb_sync - NOT a required function. Normally the accel engine
+ * for a graphics card take a specific amount of time.
+ * Often we have to wait for the accelerator to finish
+ * its operation before we can write to the framebuffer
+ * so we can have consistent display output.
+ *
+ * @info: frame buffer structure that represents a single frame buffer
+ */
+void xxxfb_sync(struct fb_info *info)
+{
+}
+
+ /*
+ * Initialization
+ */
+
+int __init xxxfb_init(void)
+{
+ int cmap_len, retval;
+
+ /*
+ * For kernel boot options (in 'video=xxxfb:<options>' format)
+ */
+#ifndef MODULE
+ char *option = NULL;
+
+ if (fb_get_options("xxxfb", &option))
+ return -ENODEV;
+ xxxfb_setup(option);
+#endif
+
+ /*
+ * Here we set the screen_base to the virtual memory address
+ * for the framebuffer. Usually we obtain the resource address
+ * from the bus layer and then translate it to virtual memory
+ * space via ioremap. Consult ioport.h.
+ */
+ info.screen_base = framebuffer_virtual_memory;
+ info.fbops = &xxxfb_ops;
+ info.fix = xxxfb_fix;
+ info.pseudo_palette = pseudo_palette;
+
+ /*
+ * Set up flags to indicate what sort of acceleration your
+ * driver can provide (pan/wrap/copyarea/etc.) and whether it
+ * is a module -- see FBINFO_* in include/linux/fb.h
+ */
+ info.flags = FBINFO_DEFAULT;
+ info.par = current_par;
+
+ /*
+ * This should give a reasonable default video mode. The following is
+ * done when we can set a video mode.
+ */
+ if (!mode_option)
+ mode_option = "640x480@60";
+
+ retval = fb_find_mode(&info.var, &info, mode_option, NULL, 0, NULL, 8);
+
+ if (!retval || retval == 4)
+ return -EINVAL;
+
+ /* This has to been done !!! */
+ fb_alloc_cmap(&info.cmap, cmap_len, 0);
+
+ /*
+ * The following is done in the case of having hardware with a static
+ * mode. If we are setting the mode ourselves we don't call this.
+ */
+ info.var = xxxfb_var;
+
+ if (register_framebuffer(&info) < 0)
+ return -EINVAL;
+ printk(KERN_INFO "fb%d: %s frame buffer device\n", info.node,
+ info.fix.id);
+ return 0;
+}
+
+ /*
+ * Cleanup
+ */
+
+static void __exit xxxfb_cleanup(void)
+{
+ /*
+ * If your driver supports multiple boards, you should unregister and
+ * clean up all instances.
+ */
+
+ unregister_framebuffer(info);
+ fb_dealloc_cmap(&info.cmap);
+ /* ... */
+}
+
+ /*
+ * Setup
+ */
+
+/*
+ * Only necessary if your driver takes special options,
+ * otherwise we fall back on the generic fb_setup().
+ */
+int __init xxxfb_setup(char *options)
+{
+ /* Parse user speficied options (`video=xxxfb:') */
+}
+
+/* ------------------------------------------------------------------------- */
+
+ /*
+ * Frame buffer operations
+ */
+
+static struct fb_ops xxxfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_open = xxxfb_open,
+ .fb_read = xxxfb_read,
+ .fb_write = xxxfb_write,
+ .fb_release = xxxfb_release,
+ .fb_check_var = xxxfb_check_var,
+ .fb_set_par = xxxfb_set_par,
+ .fb_setcolreg = xxxfb_setcolreg,
+ .fb_blank = xxxfb_blank,
+ .fb_pan_display = xxxfb_pan_display,
+ .fb_fillrect = xxxfb_fillrect, /* Needed !!! */
+ .fb_copyarea = xxxfb_copyarea, /* Needed !!! */
+ .fb_imageblit = xxxfb_imageblit, /* Needed !!! */
+ .fb_cursor = xxxfb_cursor, /* Needed !!! */
+ .fb_rotate = xxxfb_rotate,
+ .fb_poll = xxxfb_poll,
+ .fb_sync = xxxfb_sync,
+ .fb_ioctl = xxxfb_ioctl,
+ .fb_mmap = xxxfb_mmap,
+};
+
+/* ------------------------------------------------------------------------- */
+
+
+ /*
+ * Modularization
+ */
+
+module_init(xxxfb_init);
+module_exit(xxxfb_cleanup);
+
+MODULE_LICENSE("GPL");