summaryrefslogtreecommitdiff
path: root/drivers/watchdog
diff options
context:
space:
mode:
authorGuenter Roeck <linux@roeck-us.net>2013-08-17 13:58:43 -0700
committerWim Van Sebroeck <wim@iguana.be>2014-01-28 21:35:30 +0100
commit962c04f54e4a3c322d19b47256f9aec0b9c8124e (patch)
tree0dbd271080882c80fc2c6642743c99b4e5b55d65 /drivers/watchdog
parentf72fa00f8ab216ee484d61de17ddc84712456c3a (diff)
watchdog: w83627hf: Auto-detect IO address and supported chips
Instead of requiring the user to provide an IO address per module parameter, auto-detect it as well as supported chips. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Diffstat (limited to 'drivers/watchdog')
-rw-r--r--drivers/watchdog/Kconfig15
-rw-r--r--drivers/watchdog/w83627hf_wdt.c182
2 files changed, 173 insertions, 24 deletions
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 3fc5158ffecf..4fa8428612b2 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -892,13 +892,20 @@ config VIA_WDT
Most people will say N.
config W83627HF_WDT
- tristate "W83627HF/W83627DHG Watchdog Timer"
+ tristate "Watchdog timer for W83627HF/W83627DHG and compatibles"
depends on X86
select WATCHDOG_CORE
---help---
- This is the driver for the hardware watchdog on the W83627HF chipset
- as used in Advantech PC-9578 and Tyan S2721-533 motherboards
- (and likely others). The driver also supports the W83627DHG chip.
+ This is the driver for the hardware watchdog on the following
+ Super I/O chips.
+ W83627DHG/DHG-P/EHF/EHG/F/G/HF/S/SF/THF/UHG/UG
+ W83637HF
+ W83667HG/HG-B
+ W83687THF
+ NCT6775
+ NCT6776
+ NCT6779
+
This watchdog simply watches your kernel to make sure it doesn't
freeze, and if it does, it reboots your computer after a certain
amount of time.
diff --git a/drivers/watchdog/w83627hf_wdt.c b/drivers/watchdog/w83627hf_wdt.c
index e24b21082874..954becdf9cf5 100644
--- a/drivers/watchdog/w83627hf_wdt.c
+++ b/drivers/watchdog/w83627hf_wdt.c
@@ -44,10 +44,11 @@
#define WATCHDOG_NAME "w83627hf/thf/hg/dhg WDT"
#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
-/* You must set this - there is no sane way to probe for this board. */
-static int wdt_io = 0x2E;
-module_param(wdt_io, int, 0);
-MODULE_PARM_DESC(wdt_io, "w83627hf/thf WDT io port (default 0x2E)");
+static int wdt_io;
+
+enum chips { w83627hf, w83627s, w83637hf, w83627thf, w83687thf,
+ w83627ehf, w83627dhg, w83627uhg, w83667hg, w83627dhg_p, w83667hg_b,
+ nct6775, nct6776, nct6779 };
static int timeout; /* in seconds */
module_param(timeout, int, 0);
@@ -72,6 +73,21 @@ MODULE_PARM_DESC(nowayout,
#define W83627HF_LD_WDT 0x08
+#define W83627HF_ID 0x52
+#define W83627S_ID 0x59
+#define W83637HF_ID 0x70
+#define W83627THF_ID 0x82
+#define W83687THF_ID 0x85
+#define W83627EHF_ID 0x88
+#define W83627DHG_ID 0xa0
+#define W83627UHG_ID 0xa2
+#define W83667HG_ID 0xa5
+#define W83627DHG_P_ID 0xb0
+#define W83667HG_B_ID 0xb3
+#define NCT6775_ID 0xb4
+#define NCT6776_ID 0xc3
+#define NCT6779_ID 0xc5
+
static void superio_outb(int reg, int val)
{
outb(reg, WDT_EFER);
@@ -106,10 +122,7 @@ static void superio_exit(void)
release_region(wdt_io, 2);
}
-/* tyan motherboards seem to set F5 to 0x4C ?
- * So explicitly init to appropriate value. */
-
-static int w83627hf_init(struct watchdog_device *wdog)
+static int w83627hf_init(struct watchdog_device *wdog, enum chips chip)
{
int ret;
unsigned char t;
@@ -119,20 +132,59 @@ static int w83627hf_init(struct watchdog_device *wdog)
return ret;
superio_select(W83627HF_LD_WDT);
- t = superio_inb(0x20); /* check chip version */
- if (t == 0x82) { /* W83627THF */
- t = (superio_inb(0x2b) & 0xf7);
- superio_outb(0x2b, t | 0x04); /* set GPIO3 to WDT0 */
- } else if (t == 0x88 || t == 0xa0) { /* W83627EHF / W83627DHG */
- t = superio_inb(0x2d);
- superio_outb(0x2d, t & ~0x01); /* set GPIO5 to WDT0 */
- }
/* set CR30 bit 0 to activate GPIO2 */
t = superio_inb(0x30);
if (!(t & 0x01))
superio_outb(0x30, t | 0x01);
+ switch (chip) {
+ case w83627hf:
+ case w83627s:
+ t = superio_inb(0x2B) & ~0x10;
+ superio_outb(0x2B, t); /* set GPIO24 to WDT0 */
+ break;
+ case w83627thf:
+ t = (superio_inb(0x2B) & ~0x08) | 0x04;
+ superio_outb(0x2B, t); /* set GPIO3 to WDT0 */
+ break;
+ case w83627dhg:
+ case w83627dhg_p:
+ t = superio_inb(0x2D) & ~0x01; /* PIN77 -> WDT0# */
+ superio_outb(0x2D, t); /* set GPIO5 to WDT0 */
+ t = superio_inb(0xF5);
+ t |= 0x02; /* enable the WDTO# output low pulse
+ * to the KBRST# pin */
+ superio_outb(0xF5, t);
+ break;
+ case w83637hf:
+ break;
+ case w83687thf:
+ t = superio_inb(0x2C) & ~0x80; /* PIN47 -> WDT0# */
+ superio_outb(0x2C, t);
+ break;
+ case w83627ehf:
+ case w83627uhg:
+ case w83667hg:
+ case w83667hg_b:
+ case nct6775:
+ case nct6776:
+ case nct6779:
+ /*
+ * These chips have a fixed WDTO# output pin (W83627UHG),
+ * or support more than one WDTO# output pin.
+ * Don't touch its configuration, and hope the BIOS
+ * does the right thing.
+ */
+ t = superio_inb(0xF5);
+ t |= 0x02; /* enable the WDTO# output low pulse
+ * to the KBRST# pin */
+ superio_outb(0xF5, t);
+ break;
+ default:
+ break;
+ }
+
t = superio_inb(0xF6);
if (t != 0) {
pr_info("Watchdog already running. Resetting timeout to %d sec\n",
@@ -142,8 +194,6 @@ static int w83627hf_init(struct watchdog_device *wdog)
/* set second mode & disable keyboard turning off watchdog */
t = superio_inb(0xF5) & ~0x0C;
- /* enable the WDTO# output low pulse to the KBRST# pin */
- t |= 0x02;
superio_outb(0xF5, t);
/* disable keyboard & mouse turning off watchdog */
@@ -249,16 +299,108 @@ static struct notifier_block wdt_notifier = {
.notifier_call = wdt_notify_sys,
};
+static int wdt_find(int addr)
+{
+ u8 val;
+ int ret;
+
+ ret = superio_enter();
+ if (ret)
+ return ret;
+ superio_select(W83627HF_LD_WDT);
+ val = superio_inb(0x20);
+ switch (val) {
+ case W83627HF_ID:
+ ret = w83627hf;
+ break;
+ case W83627S_ID:
+ ret = w83627s;
+ break;
+ case W83637HF_ID:
+ ret = w83637hf;
+ break;
+ case W83627THF_ID:
+ ret = w83627thf;
+ break;
+ case W83687THF_ID:
+ ret = w83687thf;
+ break;
+ case W83627EHF_ID:
+ ret = w83627ehf;
+ break;
+ case W83627DHG_ID:
+ ret = w83627dhg;
+ break;
+ case W83627DHG_P_ID:
+ ret = w83627dhg_p;
+ break;
+ case W83627UHG_ID:
+ ret = w83627uhg;
+ break;
+ case W83667HG_ID:
+ ret = w83667hg;
+ break;
+ case W83667HG_B_ID:
+ ret = w83667hg_b;
+ break;
+ case NCT6775_ID:
+ ret = nct6775;
+ break;
+ case NCT6776_ID:
+ ret = nct6776;
+ break;
+ case NCT6779_ID:
+ ret = nct6779;
+ break;
+ case 0xff:
+ ret = -ENODEV;
+ break;
+ default:
+ ret = -ENODEV;
+ pr_err("Unsupported chip ID: 0x%02x\n", val);
+ break;
+ }
+ superio_exit();
+ return ret;
+}
+
static int __init wdt_init(void)
{
int ret;
+ int chip;
+ const char * const chip_name[] = {
+ "W83627HF",
+ "W83627S",
+ "W83637HF",
+ "W83627THF",
+ "W83687THF",
+ "W83627EHF",
+ "W83627DHG",
+ "W83627UHG",
+ "W83667HG",
+ "W83667DHG-P",
+ "W83667HG-B",
+ "NCT6775",
+ "NCT6776",
+ "NCT6779",
+ };
+
+ wdt_io = 0x2e;
+ chip = wdt_find(0x2e);
+ if (chip < 0) {
+ wdt_io = 0x4e;
+ chip = wdt_find(0x4e);
+ if (chip < 0)
+ return chip;
+ }
- pr_info("WDT driver for the Winbond(TM) W83627HF/THF/HG/DHG Super I/O chip initialising\n");
+ pr_info("WDT driver for %s Super I/O chip initialising\n",
+ chip_name[chip]);
watchdog_init_timeout(&wdt_dev, timeout, NULL);
watchdog_set_nowayout(&wdt_dev, nowayout);
- ret = w83627hf_init(&wdt_dev);
+ ret = w83627hf_init(&wdt_dev, chip);
if (ret) {
pr_err("failed to initialize watchdog (err=%d)\n", ret);
return ret;