Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (27 commits)
  arch/tile: support newer binutils assembler shift semantics
  arch/tile: fix deadlock bugs in rwlock implementation
  drivers/edac: provide support for tile architecture
  tile on-chip network driver: sync up with latest fixes
  arch/tile: support 4KB page size as well as 64KB
  arch/tile: add some more VMSPLIT options and use consistent naming
  arch/tile: fix some comments and whitespace
  arch/tile: export some additional module symbols
  arch/tile: enhance existing finv_buffer_remote() routine
  arch/tile: fix two bugs in the backtracer code
  arch/tile: use extended assembly to inline __mb_incoherent()
  arch/tile: use a cleaner technique to enable interrupt for cpu_idle()
  arch/tile: sync up with <arch/sim.h> and <arch/sim_def.h> changes
  arch/tile: fix reversed test of strict_strtol() return value
  arch/tile: avoid a simulator warning during bootup
  arch/tile: export <asm/hardwall.h> to userspace
  arch/tile: warn and retry if an IPI is not accepted by the target cpu
  arch/tile: stop disabling INTCTRL_1 interrupts during hypervisor downcalls
  arch/tile: fix __ndelay etc to work better
  arch/tile: bug fix: exec'ed task thought it was still single-stepping
  ...

Fix up trivial conflict in arch/tile/kernel/vmlinux.lds.S (percpu
alignment vs section naming convention fix)

4 files changed, 781 insertions, 449 deletions

diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index fe70a341bd8b..fac1a2002e67 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -7,7 +7,7 @@
 menuconfig EDAC
 	bool "EDAC (Error Detection And Correction) reporting"
 	depends on HAS_IOMEM
-	depends on X86 || PPC
+	depends on X86 || PPC || TILE
 	help
 	  EDAC is designed to report errors in the core system.
 	  These are low-level errors that are reported in the CPU or
@@ -282,4 +282,12 @@ config EDAC_CPC925
 	  a companion chip to the PowerPC 970 family of
 	  processors.
 
+config EDAC_TILE
+	tristate "Tilera Memory Controller"
+	depends on EDAC_MM_EDAC && TILE
+	default y
+	help
+	  Support for error detection and correction on the
+	  Tilera memory controller.
+
 endif # EDAC
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index ba2898b3639b..3e239133e29e 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -54,3 +54,4 @@ obj-$(CONFIG_EDAC_PPC4XX)		+= ppc4xx_edac.o
 obj-$(CONFIG_EDAC_AMD8111)		+= amd8111_edac.o
 obj-$(CONFIG_EDAC_AMD8131)		+= amd8131_edac.o
 
+obj-$(CONFIG_EDAC_TILE)			+= tile_edac.o
diff --git a/drivers/edac/tile_edac.c b/drivers/edac/tile_edac.c
new file mode 100644
index 000000000000..1d5cf06f6c6b
--- /dev/null
+++ b/drivers/edac/tile_edac.c
@@ -0,0 +1,254 @@
+/*
+ * Copyright 2011 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ * Tilera-specific EDAC driver.
+ *
+ * This source code is derived from the following driver:
+ *
+ * Cell MIC driver for ECC counting
+ *
+ * Copyright 2007 Benjamin Herrenschmidt, IBM Corp.
+ *                <benh@kernel.crashing.org>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/edac.h>
+#include <hv/hypervisor.h>
+#include <hv/drv_mshim_intf.h>
+
+#include "edac_core.h"
+
+#define DRV_NAME	"tile-edac"
+
+/* Number of cs_rows needed per memory controller on TILEPro. */
+#define TILE_EDAC_NR_CSROWS	1
+
+/* Number of channels per memory controller on TILEPro. */
+#define TILE_EDAC_NR_CHANS	1
+
+/* Granularity of reported error in bytes on TILEPro. */
+#define TILE_EDAC_ERROR_GRAIN	8
+
+/* TILE processor has multiple independent memory controllers. */
+struct platform_device *mshim_pdev[TILE_MAX_MSHIMS];
+
+struct tile_edac_priv {
+	int		hv_devhdl;	/* Hypervisor device handle. */
+	int		node;		/* Memory controller instance #. */
+	unsigned int	ce_count;	/*
+					 * Correctable-error counter
+					 * kept by the driver.
+					 */
+};
+
+static void tile_edac_check(struct mem_ctl_info *mci)
+{
+	struct tile_edac_priv	*priv = mci->pvt_info;
+	struct mshim_mem_error	mem_error;
+
+	if (hv_dev_pread(priv->hv_devhdl, 0, (HV_VirtAddr)&mem_error,
+		sizeof(struct mshim_mem_error), MSHIM_MEM_ERROR_OFF) !=
+		sizeof(struct mshim_mem_error)) {
+		pr_err(DRV_NAME ": MSHIM_MEM_ERROR_OFF pread failure.\n");
+		return;
+	}
+
+	/* Check if the current error count is different from the saved one. */
+	if (mem_error.sbe_count != priv->ce_count) {
+		dev_dbg(mci->dev, "ECC CE err on node %d\n", priv->node);
+		priv->ce_count = mem_error.sbe_count;
+		edac_mc_handle_ce(mci, 0, 0, 0, 0, 0, mci->ctl_name);
+	}
+}
+
+/*
+ * Initialize the 'csrows' table within the mci control structure with the
+ * addressing of memory.
+ */
+static int __devinit tile_edac_init_csrows(struct mem_ctl_info *mci)
+{
+	struct csrow_info	*csrow = &mci->csrows[0];
+	struct tile_edac_priv	*priv = mci->pvt_info;
+	struct mshim_mem_info	mem_info;
+
+	if (hv_dev_pread(priv->hv_devhdl, 0, (HV_VirtAddr)&mem_info,
+		sizeof(struct mshim_mem_info), MSHIM_MEM_INFO_OFF) !=
+		sizeof(struct mshim_mem_info)) {
+		pr_err(DRV_NAME ": MSHIM_MEM_INFO_OFF pread failure.\n");
+		return -1;
+	}
+
+	if (mem_info.mem_ecc)
+		csrow->edac_mode = EDAC_SECDED;
+	else
+		csrow->edac_mode = EDAC_NONE;
+	switch (mem_info.mem_type) {
+	case DDR2:
+		csrow->mtype = MEM_DDR2;
+		break;
+
+	case DDR3:
+		csrow->mtype = MEM_DDR3;
+		break;
+
+	default:
+		return -1;
+	}
+
+	csrow->first_page = 0;
+	csrow->nr_pages = mem_info.mem_size >> PAGE_SHIFT;
+	csrow->last_page = csrow->first_page + csrow->nr_pages - 1;
+	csrow->grain = TILE_EDAC_ERROR_GRAIN;
+	csrow->dtype = DEV_UNKNOWN;
+
+	return 0;
+}
+
+static int __devinit tile_edac_mc_probe(struct platform_device *pdev)
+{
+	char			hv_file[32];
+	int			hv_devhdl;
+	struct mem_ctl_info	*mci;
+	struct tile_edac_priv	*priv;
+	int			rc;
+
+	sprintf(hv_file, "mshim/%d", pdev->id);
+	hv_devhdl = hv_dev_open((HV_VirtAddr)hv_file, 0);
+	if (hv_devhdl < 0)
+		return -EINVAL;
+
+	/* A TILE MC has a single channel and one chip-select row. */
+	mci = edac_mc_alloc(sizeof(struct tile_edac_priv),
+		TILE_EDAC_NR_CSROWS, TILE_EDAC_NR_CHANS, pdev->id);
+	if (mci == NULL)
+		return -ENOMEM;
+	priv = mci->pvt_info;
+	priv->node = pdev->id;
+	priv->hv_devhdl = hv_devhdl;
+
+	mci->dev = &pdev->dev;
+	mci->mtype_cap = MEM_FLAG_DDR2;
+	mci->edac_ctl_cap = EDAC_FLAG_SECDED;
+
+	mci->mod_name = DRV_NAME;
+	mci->ctl_name = "TILEPro_Memory_Controller";
+	mci->dev_name = dev_name(&pdev->dev);
+	mci->edac_check = tile_edac_check;
+
+	/*
+	 * Initialize the MC control structure 'csrows' table
+	 * with the mapping and control information.
+	 */
+	if (tile_edac_init_csrows(mci)) {
+		/* No csrows found. */
+		mci->edac_cap = EDAC_FLAG_NONE;
+	} else {
+		mci->edac_cap = EDAC_FLAG_SECDED;
+	}
+
+	platform_set_drvdata(pdev, mci);
+
+	/* Register with EDAC core */
+	rc = edac_mc_add_mc(mci);
+	if (rc) {
+		dev_err(&pdev->dev, "failed to register with EDAC core\n");
+		edac_mc_free(mci);
+		return rc;
+	}
+
+	return 0;
+}
+
+static int __devexit tile_edac_mc_remove(struct platform_device *pdev)
+{
+	struct mem_ctl_info *mci = platform_get_drvdata(pdev);
+
+	edac_mc_del_mc(&pdev->dev);
+	if (mci)
+		edac_mc_free(mci);
+	return 0;
+}
+
+static struct platform_driver tile_edac_mc_driver = {
+	.driver		= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+	.probe		= tile_edac_mc_probe,
+	.remove		= __devexit_p(tile_edac_mc_remove),
+};
+
+/*
+ * Driver init routine.
+ */
+static int __init tile_edac_init(void)
+{
+	char	hv_file[32];
+	struct platform_device *pdev;
+	int i, err, num = 0;
+
+	/* Only support POLL mode. */
+	edac_op_state = EDAC_OPSTATE_POLL;
+
+	err = platform_driver_register(&tile_edac_mc_driver);
+	if (err)
+		return err;
+
+	for (i = 0; i < TILE_MAX_MSHIMS; i++) {
+		/*
+		 * Not all memory controllers are configured such as in the
+		 * case of a simulator. So we register only those mshims
+		 * that are configured by the hypervisor.
+		 */
+		sprintf(hv_file, "mshim/%d", i);
+		if (hv_dev_open((HV_VirtAddr)hv_file, 0) < 0)
+			continue;
+
+		pdev = platform_device_register_simple(DRV_NAME, i, NULL, 0);
+		if (IS_ERR(pdev))
+			continue;
+		mshim_pdev[i] = pdev;
+		num++;
+	}
+
+	if (num == 0) {
+		platform_driver_unregister(&tile_edac_mc_driver);
+		return -ENODEV;
+	}
+	return 0;
+}
+
+/*
+ * Driver cleanup routine.
+ */
+static void __exit tile_edac_exit(void)
+{
+	int i;
+
+	for (i = 0; i < TILE_MAX_MSHIMS; i++) {
+		struct platform_device *pdev = mshim_pdev[i];
+		if (!pdev)
+			continue;
+
+		platform_set_drvdata(pdev, NULL);
+		platform_device_unregister(pdev);
+	}
+	platform_driver_unregister(&tile_edac_mc_driver);
+}
+
+module_init(tile_edac_init);
+module_exit(tile_edac_exit);
diff --git a/drivers/net/tile/tilepro.c b/drivers/net/tile/tilepro.c
index 7cb301da7474..0825db6d883f 100644
--- a/drivers/net/tile/tilepro.c
+++ b/drivers/net/tile/tilepro.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ * Copyright 2011 Tilera Corporation. All Rights Reserved.
  *
  *   This program is free software; you can redistribute it and/or
  *   modify it under the terms of the GNU General Public License
@@ -44,10 +44,6 @@
 #include <linux/tcp.h>
 
 
-/* There is no singlethread_cpu, so schedule work on the current cpu. */
-#define singlethread_cpu -1
-
-
 /*
  * First, "tile_net_init_module()" initializes all four "devices" which
  * can be used by linux.
@@ -73,15 +69,16 @@
  * return, knowing we will be called again later.  Otherwise, we
  * reenable the ingress interrupt, and call "napi_complete()".
  *
+ * HACK: Since disabling the ingress interrupt is not reliable, we
+ * ignore the interrupt if the global "active" flag is false.
+ *
  *
  * NOTE: The use of "native_driver" ensures that EPP exists, and that
- * "epp_sendv" is legal, and that "LIPP" is being used.
+ * we are using "LIPP" and "LEPP".
  *
  * NOTE: Failing to free completions for an arbitrarily long time
  * (which is defined to be illegal) does in fact cause bizarre
  * problems.  The "egress_timer" helps prevent this from happening.
- *
- * NOTE: The egress code can be interrupted by the interrupt handler.
  */
 
 
@@ -142,6 +139,7 @@
 MODULE_AUTHOR("Tilera");
 MODULE_LICENSE("GPL");
 
+
 /*
  * Queue of incoming packets for a specific cpu and device.
  *
@@ -177,7 +175,7 @@ struct tile_net_cpu {
 	struct tile_netio_queue queue;
 	/* Statistics. */
 	struct tile_net_stats_t stats;
-	/* ISSUE: Is this needed? */
+	/* True iff NAPI is enabled. */
 	bool napi_enabled;
 	/* True if this tile has succcessfully registered with the IPP. */
 	bool registered;
@@ -200,20 +198,20 @@ struct tile_net_cpu {
 struct tile_net_priv {
 	/* Our network device. */
 	struct net_device *dev;
-	/* The actual egress queue. */
-	lepp_queue_t *epp_queue;
-	/* Protects "epp_queue->cmd_tail" and "epp_queue->comp_tail" */
-	spinlock_t cmd_lock;
-	/* Protects "epp_queue->comp_head". */
-	spinlock_t comp_lock;
+	/* Pages making up the egress queue. */
+	struct page *eq_pages;
+	/* Address of the actual egress queue. */
+	lepp_queue_t *eq;
+	/* Protects "eq". */
+	spinlock_t eq_lock;
 	/* The hypervisor handle for this interface. */
 	int hv_devhdl;
 	/* The intr bit mask that IDs this device. */
 	u32 intr_id;
 	/* True iff "tile_net_open_aux()" has succeeded. */
-	int partly_opened;
-	/* True iff "tile_net_open_inner()" has succeeded. */
-	int fully_opened;
+	bool partly_opened;
+	/* True iff the device is "active". */
+	bool active;
 	/* Effective network cpus. */
 	struct cpumask network_cpus_map;
 	/* Number of network cpus. */
@@ -228,6 +226,10 @@ struct tile_net_priv {
 	struct tile_net_cpu *cpu[NR_CPUS];
 };
 
+/* Log2 of the number of small pages needed for the egress queue. */
+#define EQ_ORDER  get_order(sizeof(lepp_queue_t))
+/* Size of the egress queue's pages. */
+#define EQ_SIZE   (1 << (PAGE_SHIFT + EQ_ORDER))
 
 /*
  * The actual devices (xgbe0, xgbe1, gbe0, gbe1).
@@ -284,7 +286,11 @@ static void net_printk(char *fmt, ...)
  */
 static void dump_packet(unsigned char *data, unsigned long length, char *s)
 {
+	int my_cpu = smp_processor_id();
+
 	unsigned long i;
+	char buf[128];
+
 	static unsigned int count;
 
 	pr_info("dump_packet(data %p, length 0x%lx s %s count 0x%x)\n",
@@ -294,10 +300,12 @@ static void dump_packet(unsigned char *data, unsigned long length, char *s)
 
 	for (i = 0; i < length; i++) {
 		if ((i & 0xf) == 0)
-			sprintf(buf, "%8.8lx:", i);
+			sprintf(buf, "[%02d] %8.8lx:", my_cpu, i);
 		sprintf(buf + strlen(buf), " %2.2x", data[i]);
-		if ((i & 0xf) == 0xf || i == length - 1)
-			pr_info("%s\n", buf);
+		if ((i & 0xf) == 0xf || i == length - 1) {
+			strcat(buf, "\n");
+			pr_info("%s", buf);
+		}
 	}
 }
 #endif
@@ -351,60 +359,109 @@ static void tile_net_provide_linux_buffer(struct tile_net_cpu *info,
 
 /*
  * Provide a linux buffer for LIPP.
+ *
+ * Note that the ACTUAL allocation for each buffer is a "struct sk_buff",
+ * plus a chunk of memory that includes not only the requested bytes, but
+ * also NET_SKB_PAD bytes of initial padding, and a "struct skb_shared_info".
+ *
+ * Note that "struct skb_shared_info" is 88 bytes with 64K pages and
+ * 268 bytes with 4K pages (since the frags[] array needs 18 entries).
+ *
+ * Without jumbo packets, the maximum packet size will be 1536 bytes,
+ * and we use 2 bytes (NET_IP_ALIGN) of padding.  ISSUE: If we told
+ * the hardware to clip at 1518 bytes instead of 1536 bytes, then we
+ * could save an entire cache line, but in practice, we don't need it.
+ *
+ * Since CPAs are 38 bits, and we can only encode the high 31 bits in
+ * a "linux_buffer_t", the low 7 bits must be zero, and thus, we must
+ * align the actual "va" mod 128.
+ *
+ * We assume that the underlying "head" will be aligned mod 64.  Note
+ * that in practice, we have seen "head" NOT aligned mod 128 even when
+ * using 2048 byte allocations, which is surprising.
+ *
+ * If "head" WAS always aligned mod 128, we could change LIPP to
+ * assume that the low SIX bits are zero, and the 7th bit is one, that
+ * is, align the actual "va" mod 128 plus 64, which would be "free".
+ *
+ * For now, the actual "head" pointer points at NET_SKB_PAD bytes of
+ * padding, plus 28 or 92 bytes of extra padding, plus the sk_buff
+ * pointer, plus the NET_IP_ALIGN padding, plus 126 or 1536 bytes for
+ * the actual packet, plus 62 bytes of empty padding, plus some
+ * padding and the "struct skb_shared_info".
+ *
+ * With 64K pages, a large buffer thus needs 32+92+4+2+1536+62+88
+ * bytes, or 1816 bytes, which fits comfortably into 2048 bytes.
+ *
+ * With 64K pages, a small buffer thus needs 32+92+4+2+126+88
+ * bytes, or 344 bytes, which means we are wasting 64+ bytes, and
+ * could presumably increase the size of small buffers.
+ *
+ * With 4K pages, a large buffer thus needs 32+92+4+2+1536+62+268
+ * bytes, or 1996 bytes, which fits comfortably into 2048 bytes.
+ *
+ * With 4K pages, a small buffer thus needs 32+92+4+2+126+268
+ * bytes, or 524 bytes, which is annoyingly wasteful.
+ *
+ * Maybe we should increase LIPP_SMALL_PACKET_SIZE to 192?
+ *
+ * ISSUE: Maybe we should increase "NET_SKB_PAD" to 64?
  */
 static bool tile_net_provide_needed_buffer(struct tile_net_cpu *info,
 					   bool small)
 {
-	/* ISSUE: What should we use here? */
+#if TILE_NET_MTU <= 1536
+	/* Without "jumbo", 2 + 1536 should be sufficient. */
+	unsigned int large_size = NET_IP_ALIGN + 1536;
+#else
+	/* ISSUE: This has not been tested. */
 	unsigned int large_size = NET_IP_ALIGN + TILE_NET_MTU + 100;
+#endif
 
-	/* Round up to ensure to avoid "false sharing" with last cache line. */
-	unsigned int buffer_size =
+	/* Avoid "false sharing" with last cache line. */
+	/* ISSUE: This is already done by "dev_alloc_skb()". */
+	unsigned int len =
 		 (((small ? LIPP_SMALL_PACKET_SIZE : large_size) +
 		   CHIP_L2_LINE_SIZE() - 1) & -CHIP_L2_LINE_SIZE());
 
-	/*
-	 * ISSUE: Since CPAs are 38 bits, and we can only encode the
-	 * high 31 bits in a "linux_buffer_t", the low 7 bits must be
-	 * zero, and thus, we must align the actual "va" mod 128.
-	 */
-	const unsigned long align = 128;
+	unsigned int padding = 128 - NET_SKB_PAD;
+	unsigned int align;
 
 	struct sk_buff *skb;
 	void *va;
 
 	struct sk_buff **skb_ptr;
 
-	/* Note that "dev_alloc_skb()" adds NET_SKB_PAD more bytes, */
-	/* and also "reserves" that many bytes. */
-	/* ISSUE: Can we "share" the NET_SKB_PAD bytes with "skb_ptr"? */
-	int len = sizeof(*skb_ptr) + align + buffer_size;
-
-	while (1) {
-
-		/* Allocate (or fail). */
-		skb = dev_alloc_skb(len);
-		if (skb == NULL)
-			return false;
-
-		/* Make room for a back-pointer to 'skb'. */
-		skb_reserve(skb, sizeof(*skb_ptr));
+	/* Request 96 extra bytes for alignment purposes. */
+	skb = dev_alloc_skb(len + padding);
+	if (skb == NULL)
+		return false;
 
-		/* Make sure we are aligned. */
-		skb_reserve(skb, -(long)skb->data & (align - 1));
+	/* Skip 32 or 96 bytes to align "data" mod 128. */
+	align = -(long)skb->data & (128 - 1);
+	BUG_ON(align > padding);
+	skb_reserve(skb, align);
 
-		/* This address is given to IPP. */
-		va = skb->data;
+	/* This address is given to IPP. */
+	va = skb->data;
 
-		if (small)
-			break;
+	/* Buffers must not span a huge page. */
+	BUG_ON(((((long)va & ~HPAGE_MASK) + len) & HPAGE_MASK) != 0);
 
-		/* ISSUE: This has never been observed! */
-		/* Large buffers must not span a huge page. */
-		if (((((long)va & ~HPAGE_MASK) + 1535) & HPAGE_MASK) == 0)
-			break;
-		pr_err("Leaking unaligned linux buffer at %p.\n", va);
+#ifdef TILE_NET_PARANOIA
+#if CHIP_HAS_CBOX_HOME_MAP()
+	if (hash_default) {
+		HV_PTE pte = *virt_to_pte(current->mm, (unsigned long)va);
+		if (hv_pte_get_mode(pte) != HV_PTE_MODE_CACHE_HASH_L3)
+			panic("Non-HFH ingress buffer! VA=%p Mode=%d PTE=%llx",
+			      va, hv_pte_get_mode(pte), hv_pte_val(pte));
 	}
+#endif
+#endif
+
+	/* Invalidate the packet buffer. */
+	if (!hash_default)
+		__inv_buffer(va, len);
 
 	/* Skip two bytes to satisfy LIPP assumptions. */
 	/* Note that this aligns IP on a 16 byte boundary. */
@@ -415,23 +472,9 @@ static bool tile_net_provide_needed_buffer(struct tile_net_cpu *info,
 	skb_ptr = va - sizeof(*skb_ptr);
 	*skb_ptr = skb;
 
-	/* Invalidate the packet buffer. */
-	if (!hash_default)
-		__inv_buffer(skb->data, buffer_size);
-
 	/* Make sure "skb_ptr" has been flushed. */
 	__insn_mf();
 
-#ifdef TILE_NET_PARANOIA
-#if CHIP_HAS_CBOX_HOME_MAP()
-	if (hash_default) {
-		HV_PTE pte = *virt_to_pte(current->mm, (unsigned long)va);
-		if (hv_pte_get_mode(pte) != HV_PTE_MODE_CACHE_HASH_L3)
-			panic("Non-coherent ingress buffer!");
-	}
-#endif
-#endif
-
 	/* Provide the new buffer. */
 	tile_net_provide_linux_buffer(info, va, small);
 
@@ -469,48 +512,64 @@ oops:
  * Grab some LEPP completions, and store them in "comps", of size
  * "comps_size", and return the number of completions which were
  * stored, so the caller can free them.
- *
- * If "pending" is not NULL, it will be set to true if there might
- * still be some pending completions caused by this tile, else false.
  */
-static unsigned int tile_net_lepp_grab_comps(struct net_device *dev,
+static unsigned int tile_net_lepp_grab_comps(lepp_queue_t *eq,
 					     struct sk_buff *comps[],
 					     unsigned int comps_size,
-					     bool *pending)
+					     unsigned int min_size)
 {
-	struct tile_net_priv *priv = netdev_priv(dev);
-
-	lepp_queue_t *eq = priv->epp_queue;
-
 	unsigned int n = 0;
 
-	unsigned int comp_head;
-	unsigned int comp_busy;
-	unsigned int comp_tail;
-
-	spin_lock(&priv->comp_lock);
-
-	comp_head = eq->comp_head;
-	comp_busy = eq->comp_busy;
-	comp_tail = eq->comp_tail;
+	unsigned int comp_head = eq->comp_head;
+	unsigned int comp_busy = eq->comp_busy;
 
 	while (comp_head != comp_busy && n < comps_size) {
 		comps[n++] = eq->comps[comp_head];
 		LEPP_QINC(comp_head);
 	}
 
-	if (pending != NULL)
-		*pending = (comp_head != comp_tail);
+	if (n < min_size)
+		return 0;
 
 	eq->comp_head = comp_head;
 
-	spin_unlock(&priv->comp_lock);
-
 	return n;
 }
 
 
 /*
+ * Free some comps, and return true iff there are still some pending.
+ */
+static bool tile_net_lepp_free_comps(struct net_device *dev, bool all)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+
+	lepp_queue_t *eq = priv->eq;
+
+	struct sk_buff *olds[64];
+	unsigned int wanted = 64;
+	unsigned int i, n;
+	bool pending;
+
+	spin_lock(&priv->eq_lock);
+
+	if (all)
+		eq->comp_busy = eq->comp_tail;
+
+	n = tile_net_lepp_grab_comps(eq, olds, wanted, 0);
+
+	pending = (eq->comp_head != eq->comp_tail);
+
+	spin_unlock(&priv->eq_lock);
+
+	for (i = 0; i < n; i++)
+		kfree_skb(olds[i]);
+
+	return pending;
+}
+
+
+/*
  * Make sure the egress timer is scheduled.
  *
  * Note that we use "schedule if not scheduled" logic instead of the more
@@ -544,21 +603,11 @@ static void tile_net_handle_egress_timer(unsigned long arg)
 	struct tile_net_cpu *info = (struct tile_net_cpu *)arg;
 	struct net_device *dev = info->napi.dev;
 
-	struct sk_buff *olds[32];
-	unsigned int wanted = 32;
-	unsigned int i, nolds = 0;
-	bool pending;
-
 	/* The timer is no longer scheduled. */
 	info->egress_timer_scheduled = false;
 
-	nolds = tile_net_lepp_grab_comps(dev, olds, wanted, &pending);
-
-	for (i = 0; i < nolds; i++)
-		kfree_skb(olds[i]);
-
-	/* Reschedule timer if needed. */
-	if (pending)
+	/* Free comps, and reschedule timer if more are pending. */
+	if (tile_net_lepp_free_comps(dev, false))
 		tile_net_schedule_egress_timer(info);
 }
 
@@ -636,8 +685,39 @@ static bool is_dup_ack(char *s1, char *s2, unsigned int len)
 
 
 
+static void tile_net_discard_aux(struct tile_net_cpu *info, int index)
+{
+	struct tile_netio_queue *queue = &info->queue;
+	netio_queue_impl_t *qsp = queue->__system_part;
+	netio_queue_user_impl_t *qup = &queue->__user_part;
+
+	int index2_aux = index + sizeof(netio_pkt_t);
+	int index2 =
+		((index2_aux ==
+		  qsp->__packet_receive_queue.__last_packet_plus_one) ?
+		 0 : index2_aux);
+
+	netio_pkt_t *pkt = (netio_pkt_t *)((unsigned long) &qsp[1] + index);
+
+	/* Extract the "linux_buffer_t". */
+	unsigned int buffer = pkt->__packet.word;
+
+	/* Convert "linux_buffer_t" to "va". */
+	void *va = __va((phys_addr_t)(buffer >> 1) << 7);
+
+	/* Acquire the associated "skb". */
+	struct sk_buff **skb_ptr = va - sizeof(*skb_ptr);
+	struct sk_buff *skb = *skb_ptr;
+
+	kfree_skb(skb);
+
+	/* Consume this packet. */
+	qup->__packet_receive_read = index2;
+}
+
+
 /*
- * Like "tile_net_handle_packets()", but just discard packets.
+ * Like "tile_net_poll()", but just discard packets.
  */
 static void tile_net_discard_packets(struct net_device *dev)
 {
@@ -650,32 +730,8 @@ static void tile_net_discard_packets(struct net_device *dev)
 
 	while (qup->__packet_receive_read !=
 	       qsp->__packet_receive_queue.__packet_write) {
-
 		int index = qup->__packet_receive_read;
-
-		int index2_aux = index + sizeof(netio_pkt_t);
-		int index2 =
-			((index2_aux ==
-			  qsp->__packet_receive_queue.__last_packet_plus_one) ?
-			 0 : index2_aux);
-
-		netio_pkt_t *pkt = (netio_pkt_t *)
-			((unsigned long) &qsp[1] + index);
-
-		/* Extract the "linux_buffer_t". */
-		unsigned int buffer = pkt->__packet.word;
-
-		/* Convert "linux_buffer_t" to "va". */
-		void *va = __va((phys_addr_t)(buffer >> 1) << 7);
-
-		/* Acquire the associated "skb". */
-		struct sk_buff **skb_ptr = va - sizeof(*skb_ptr);
-		struct sk_buff *skb = *skb_ptr;
-
-		kfree_skb(skb);
-
-		/* Consume this packet. */
-		qup->__packet_receive_read = index2;
+		tile_net_discard_aux(info, index);
 	}
 }
 
@@ -704,7 +760,8 @@ static bool tile_net_poll_aux(struct tile_net_cpu *info, int index)
 
 	netio_pkt_metadata_t *metadata = NETIO_PKT_METADATA(pkt);
 
-	/* Extract the packet size. */
+	/* Extract the packet size.  FIXME: Shouldn't the second line */
+	/* get subtracted?  Mostly moot, since it should be "zero". */
 	unsigned long len =
 		(NETIO_PKT_CUSTOM_LENGTH(pkt) +
 		 NET_IP_ALIGN - NETIO_PACKET_PADDING);
@@ -722,15 +779,6 @@ static bool tile_net_poll_aux(struct tile_net_cpu *info, int index)
 	/* Compare to "NETIO_PKT_CUSTOM_DATA(pkt)". */
 	unsigned char *buf = va + NET_IP_ALIGN;
 
-#ifdef IGNORE_DUP_ACKS
-
-	static int other;
-	static int final;
-	static int keep;
-	static int skip;
-
-#endif
-
 	/* Invalidate the packet buffer. */
 	if (!hash_default)
 		__inv_buffer(buf, len);
@@ -745,16 +793,8 @@ static bool tile_net_poll_aux(struct tile_net_cpu *info, int index)
 #ifdef TILE_NET_VERIFY_INGRESS
 	if (!NETIO_PKT_L4_CSUM_CORRECT_M(metadata, pkt) &&
 	    NETIO_PKT_L4_CSUM_CALCULATED_M(metadata, pkt)) {
-		/*
-		 * FIXME: This complains about UDP packets
-		 * with a "zero" checksum (bug 6624).
-		 */
-#ifdef TILE_NET_PANIC_ON_BAD
-		dump_packet(buf, len, "rx");
-		panic("Bad L4 checksum.");
-#else
+		/* Bug 6624: Includes UDP packets with a "zero" checksum. */
 		pr_warning("Bad L4 checksum on %d byte packet.\n", len);
-#endif
 	}
 	if (!NETIO_PKT_L3_CSUM_CORRECT_M(metadata, pkt) &&
 	    NETIO_PKT_L3_CSUM_CALCULATED_M(metadata, pkt)) {
@@ -769,90 +809,29 @@ static bool tile_net_poll_aux(struct tile_net_cpu *info, int index)
 		}
 		break;
 	case NETIO_PKT_STATUS_BAD:
-#ifdef TILE_NET_PANIC_ON_BAD
-		dump_packet(buf, len, "rx");
-		panic("Unexpected BAD packet.");
-#else
-		pr_warning("Unexpected BAD %d byte packet.\n", len);
-#endif
+		pr_warning("Unexpected BAD %ld byte packet.\n", len);
 	}
 #endif
 
 	filter = 0;
 
+	/* ISSUE: Filter TCP packets with "bad" checksums? */
+
 	if (!(dev->flags & IFF_UP)) {
 		/* Filter packets received before we're up. */
 		filter = 1;
+	} else if (NETIO_PKT_STATUS_M(metadata, pkt) == NETIO_PKT_STATUS_BAD) {
+		/* Filter "truncated" packets. */
+		filter = 1;
 	} else if (!(dev->flags & IFF_PROMISC)) {
-		/*
-		 * FIXME: Implement HW multicast filter.
-		 */
-		if (is_unicast_ether_addr(buf)) {
+		/* FIXME: Implement HW multicast filter. */
+		if (!is_multicast_ether_addr(buf)) {
 			/* Filter packets not for our address. */
 			const u8 *mine = dev->dev_addr;
 			filter = compare_ether_addr(mine, buf);
 		}
 	}
 
-#ifdef IGNORE_DUP_ACKS
-
-	if (len != 66) {
-		/* FIXME: Must check "is_tcp_ack(buf, len)" somehow. */
-
-		other++;
-
-	} else if (index2 ==
-		   qsp->__packet_receive_queue.__packet_write) {
-
-		final++;
-
-	} else {
-
-		netio_pkt_t *pkt2 = (netio_pkt_t *)
-			((unsigned long) &qsp[1] + index2);
-
-		netio_pkt_metadata_t *metadata2 =
-			NETIO_PKT_METADATA(pkt2);
-
-		/* Extract the packet size. */
-		unsigned long len2 =
-			(NETIO_PKT_CUSTOM_LENGTH(pkt2) +
-			 NET_IP_ALIGN - NETIO_PACKET_PADDING);
-
-		if (len2 == 66 &&
-		    NETIO_PKT_FLOW_HASH_M(metadata, pkt) ==
-		    NETIO_PKT_FLOW_HASH_M(metadata2, pkt2)) {
-
-			/* Extract the "linux_buffer_t". */
-			unsigned int buffer2 = pkt2->__packet.word;
-
-			/* Convert "linux_buffer_t" to "va". */
-			void *va2 =
-				__va((phys_addr_t)(buffer2 >> 1) << 7);
-
-			/* Extract the packet data pointer. */
-			/* Compare to "NETIO_PKT_CUSTOM_DATA(pkt)". */
-			unsigned char *buf2 = va2 + NET_IP_ALIGN;
-
-			/* Invalidate the packet buffer. */
-			if (!hash_default)
-				__inv_buffer(buf2, len2);
-
-			if (is_dup_ack(buf, buf2, len)) {
-				skip++;
-				filter = 1;
-			} else {
-				keep++;
-			}
-		}
-	}
-
-	if (net_ratelimit())
-		pr_info("Other %d Final %d Keep %d Skip %d.\n",
-			other, final, keep, skip);
-
-#endif
-
 	if (filter) {
 
 		/* ISSUE: Update "drop" statistics? */
@@ -877,10 +856,7 @@ static bool tile_net_poll_aux(struct tile_net_cpu *info, int index)
 		/* NOTE: This call also sets "skb->dev = dev". */
 		skb->protocol = eth_type_trans(skb, dev);
 
-		/* ISSUE: Discard corrupt packets? */
-		/* ISSUE: Discard packets with bad checksums? */
-
-		/* Avoid recomputing TCP/UDP checksums. */
+		/* Avoid recomputing "good" TCP/UDP checksums. */
 		if (NETIO_PKT_L4_CSUM_CORRECT_M(metadata, pkt))
 			skb->ip_summed = CHECKSUM_UNNECESSARY;
 
@@ -912,9 +888,14 @@ static bool tile_net_poll_aux(struct tile_net_cpu *info, int index)
 /*
  * Handle some packets for the given device on the current CPU.
  *
- * ISSUE: The "rotting packet" race condition occurs if a packet
- * arrives after the queue appears to be empty, and before the
- * hypervisor interrupt is re-enabled.
+ * If "tile_net_stop()" is called on some other tile while this
+ * function is running, we will return, hopefully before that
+ * other tile asks us to call "napi_disable()".
+ *
+ * The "rotting packet" race condition occurs if a packet arrives
+ * during the extremely narrow window between the queue appearing to
+ * be empty, and the ingress interrupt being re-enabled.  This happens
+ * a LOT under heavy network load.
  */
 static int tile_net_poll(struct napi_struct *napi, int budget)
 {
@@ -928,7 +909,7 @@ static int tile_net_poll(struct napi_struct *napi, int budget)
 
 	unsigned int work = 0;
 
-	while (1) {
+	while (priv->active) {
 		int index = qup->__packet_receive_read;
 		if (index == qsp->__packet_receive_queue.__packet_write)
 			break;
@@ -941,19 +922,24 @@ static int tile_net_poll(struct napi_struct *napi, int budget)
 
 	napi_complete(&info->napi);
 
-	/* Re-enable hypervisor interrupts. */
+	if (!priv->active)
+		goto done;
+
+	/* Re-enable the ingress interrupt. */
 	enable_percpu_irq(priv->intr_id);
 
-	/* HACK: Avoid the "rotting packet" problem. */
+	/* HACK: Avoid the "rotting packet" problem (see above). */
 	if (qup->__packet_receive_read !=
-	    qsp->__packet_receive_queue.__packet_write)
-		napi_schedule(&info->napi);
-
-	/* ISSUE: Handle completions? */
+	    qsp->__packet_receive_queue.__packet_write) {
+		/* ISSUE: Sometimes this returns zero, presumably */
+		/* because an interrupt was handled for this tile. */
+		(void)napi_reschedule(&info->napi);
+	}
 
 done:
 
-	tile_net_provide_needed_buffers(info);
+	if (priv->active)
+		tile_net_provide_needed_buffers(info);
 
 	return work;
 }
@@ -961,6 +947,12 @@ done:
 
 /*
  * Handle an ingress interrupt for the given device on the current cpu.
+ *
+ * ISSUE: Sometimes this gets called after "disable_percpu_irq()" has
+ * been called!  This is probably due to "pending hypervisor downcalls".
+ *
+ * ISSUE: Is there any race condition between the "napi_schedule()" here
+ * and the "napi_complete()" call above?
  */
 static irqreturn_t tile_net_handle_ingress_interrupt(int irq, void *dev_ptr)
 {
@@ -969,9 +961,15 @@ static irqreturn_t tile_net_handle_ingress_interrupt(int irq, void *dev_ptr)
 	int my_cpu = smp_processor_id();
 	struct tile_net_cpu *info = priv->cpu[my_cpu];
 
-	/* Disable hypervisor interrupt. */
+	/* Disable the ingress interrupt. */
 	disable_percpu_irq(priv->intr_id);
 
+	/* Ignore unwanted interrupts. */
+	if (!priv->active)
+		return IRQ_HANDLED;
+
+	/* ISSUE: Sometimes "info->napi_enabled" is false here. */
+
 	napi_schedule(&info->napi);
 
 	return IRQ_HANDLED;
@@ -1005,8 +1003,7 @@ static int tile_net_open_aux(struct net_device *dev)
 	 */
 	{
 		int epp_home = hv_lotar_to_cpu(epp_lotar);
-		struct page *page = virt_to_page(priv->epp_queue);
-		homecache_change_page_home(page, 0, epp_home);
+		homecache_change_page_home(priv->eq_pages, EQ_ORDER, epp_home);
 	}
 
 	/*
@@ -1015,9 +1012,9 @@ static int tile_net_open_aux(struct net_device *dev)
 	{
 		netio_ipp_address_t ea = {
 			.va = 0,
-			.pa = __pa(priv->epp_queue),
+			.pa = __pa(priv->eq),
 			.pte = hv_pte(0),
-			.size = PAGE_SIZE,
+			.size = EQ_SIZE,
 		};
 		ea.pte = hv_pte_set_lotar(ea.pte, epp_lotar);
 		ea.pte = hv_pte_set_mode(ea.pte, HV_PTE_MODE_CACHE_TILE_L3);
@@ -1043,7 +1040,7 @@ static int tile_net_open_aux(struct net_device *dev)
 
 
 /*
- * Register with hypervisor on each CPU.
+ * Register with hypervisor on the current CPU.
  *
  * Strangely, this function does important things even if it "fails",
  * which is especially common if the link is not up yet.  Hopefully
@@ -1092,7 +1089,8 @@ static void tile_net_register(void *dev_ptr)
 	priv->cpu[my_cpu] = info;
 
 	/*
-	 * Register ourselves with the IPP.
+	 * Register ourselves with LIPP.  This does a lot of stuff,
+	 * including invoking the LIPP registration code.
 	 */
 	ret = hv_dev_pwrite(priv->hv_devhdl, 0,
 			    (HV_VirtAddr)&config,
@@ -1101,8 +1099,11 @@ static void tile_net_register(void *dev_ptr)
 	PDEBUG("hv_dev_pwrite(NETIO_IPP_INPUT_REGISTER_OFF) returned %d\n",
 	       ret);
 	if (ret < 0) {
-		printk(KERN_DEBUG "hv_dev_pwrite NETIO_IPP_INPUT_REGISTER_OFF"
-		       " failure %d\n", ret);
+		if (ret != NETIO_LINK_DOWN) {
+			printk(KERN_DEBUG "hv_dev_pwrite "
+			       "NETIO_IPP_INPUT_REGISTER_OFF failure %d\n",
+			       ret);
+		}
 		info->link_down = (ret == NETIO_LINK_DOWN);
 		return;
 	}
@@ -1145,15 +1146,47 @@ static void tile_net_register(void *dev_ptr)
 			   NETIO_IPP_GET_FASTIO_OFF);
 	PDEBUG("hv_dev_pread(NETIO_IPP_GET_FASTIO_OFF) returned %d\n", ret);
 
-	netif_napi_add(dev, &info->napi, tile_net_poll, 64);
-
 	/* Now we are registered. */
 	info->registered = true;
 }
 
 
 /*
- * Unregister with hypervisor on each CPU.
+ * Deregister with hypervisor on the current CPU.
+ *
+ * This simply discards all our credits, so no more packets will be
+ * delivered to this tile.  There may still be packets in our queue.
+ *
+ * Also, disable the ingress interrupt.
+ */
+static void tile_net_deregister(void *dev_ptr)
+{
+	struct net_device *dev = (struct net_device *)dev_ptr;
+	struct tile_net_priv *priv = netdev_priv(dev);
+	int my_cpu = smp_processor_id();
+	struct tile_net_cpu *info = priv->cpu[my_cpu];
+
+	/* Disable the ingress interrupt. */
+	disable_percpu_irq(priv->intr_id);
+
+	/* Do nothing else if not registered. */
+	if (info == NULL || !info->registered)
+		return;
+
+	{
+		struct tile_netio_queue *queue = &info->queue;
+		netio_queue_user_impl_t *qup = &queue->__user_part;
+
+		/* Discard all our credits. */
+		__netio_fastio_return_credits(qup->__fastio_index, -1);
+	}
+}
+
+
+/*
+ * Unregister with hypervisor on the current CPU.
+ *
+ * Also, disable the ingress interrupt.
  */
 static void tile_net_unregister(void *dev_ptr)
 {
@@ -1162,35 +1195,23 @@ static void tile_net_unregister(void *dev_ptr)
 	int my_cpu = smp_processor_id();
 	struct tile_net_cpu *info = priv->cpu[my_cpu];
 
-	int ret = 0;
+	int ret;
 	int dummy = 0;
 
-	/* Do nothing if never registered. */
-	if (info == NULL)
-		return;
+	/* Disable the ingress interrupt. */
+	disable_percpu_irq(priv->intr_id);
 
-	/* Do nothing if already unregistered. */
-	if (!info->registered)
+	/* Do nothing else if not registered. */
+	if (info == NULL || !info->registered)
 		return;
 
-	/*
-	 * Unregister ourselves with LIPP.
-	 */
+	/* Unregister ourselves with LIPP/LEPP. */
 	ret = hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy,
 			    sizeof(dummy), NETIO_IPP_INPUT_UNREGISTER_OFF);
-	PDEBUG("hv_dev_pwrite(NETIO_IPP_INPUT_UNREGISTER_OFF) returned %d\n",
-	       ret);
-	if (ret < 0) {
-		/* FIXME: Just panic? */
-		pr_err("hv_dev_pwrite NETIO_IPP_INPUT_UNREGISTER_OFF"
-		       " failure %d\n", ret);
-	}
+	if (ret < 0)
+		panic("Failed to unregister with LIPP/LEPP!\n");
 
-	/*
-	 * Discard all packets still in our NetIO queue.  Hopefully,
-	 * once the unregister call is complete, there will be no
-	 * packets still in flight on the IDN.
-	 */
+	/* Discard all packets still in our NetIO queue. */
 	tile_net_discard_packets(dev);
 
 	/* Reset state. */
@@ -1200,11 +1221,6 @@ static void tile_net_unregister(void *dev_ptr)
 	/* Cancel egress timer. */
 	del_timer(&info->egress_timer);
 	info->egress_timer_scheduled = false;
-
-	netif_napi_del(&info->napi);
-
-	/* Now we are unregistered. */
-	info->registered = false;
 }
 
 
@@ -1212,18 +1228,28 @@ static void tile_net_unregister(void *dev_ptr)
  * Helper function for "tile_net_stop()".
  *
  * Also used to handle registration failure in "tile_net_open_inner()",
- * when "fully_opened" is known to be false, and the various extra
- * steps in "tile_net_stop()" are not necessary.  ISSUE: It might be
- * simpler if we could just call "tile_net_stop()" anyway.
+ * when the various extra steps in "tile_net_stop()" are not necessary.
  */
 static void tile_net_stop_aux(struct net_device *dev)
 {
 	struct tile_net_priv *priv = netdev_priv(dev);
+	int i;
 
 	int dummy = 0;
 
-	/* Unregister all tiles, so LIPP will stop delivering packets. */
+	/*
+	 * Unregister all tiles, so LIPP will stop delivering packets.
+	 * Also, delete all the "napi" objects (sequentially, to protect
+	 * "dev->napi_list").
+	 */
 	on_each_cpu(tile_net_unregister, (void *)dev, 1);
+	for_each_online_cpu(i) {
+		struct tile_net_cpu *info = priv->cpu[i];
+		if (info != NULL && info->registered) {
+			netif_napi_del(&info->napi);
+			info->registered = false;
+		}
+	}
 
 	/* Stop LIPP/LEPP. */
 	if (hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy,
@@ -1235,18 +1261,15 @@ static void tile_net_stop_aux(struct net_device *dev)
 
 
 /*
- * Disable ingress interrupts for the given device on the current cpu.
+ * Disable NAPI for the given device on the current cpu.
  */
-static void tile_net_disable_intr(void *dev_ptr)
+static void tile_net_stop_disable(void *dev_ptr)
 {
 	struct net_device *dev = (struct net_device *)dev_ptr;
 	struct tile_net_priv *priv = netdev_priv(dev);
 	int my_cpu = smp_processor_id();
 	struct tile_net_cpu *info = priv->cpu[my_cpu];
 
-	/* Disable hypervisor interrupt. */
-	disable_percpu_irq(priv->intr_id);
-
 	/* Disable NAPI if needed. */
 	if (info != NULL && info->napi_enabled) {
 		napi_disable(&info->napi);
@@ -1256,21 +1279,24 @@ static void tile_net_disable_intr(void *dev_ptr)
 
 
 /*
- * Enable ingress interrupts for the given device on the current cpu.
+ * Enable NAPI and the ingress interrupt for the given device
+ * on the current cpu.
+ *
+ * ISSUE: Only do this for "network cpus"?
  */
-static void tile_net_enable_intr(void *dev_ptr)
+static void tile_net_open_enable(void *dev_ptr)
 {
 	struct net_device *dev = (struct net_device *)dev_ptr;
 	struct tile_net_priv *priv = netdev_priv(dev);
 	int my_cpu = smp_processor_id();
 	struct tile_net_cpu *info = priv->cpu[my_cpu];
 
-	/* Enable hypervisor interrupt. */
-	enable_percpu_irq(priv->intr_id);
-
 	/* Enable NAPI. */
 	napi_enable(&info->napi);
 	info->napi_enabled = true;
+
+	/* Enable the ingress interrupt. */
+	enable_percpu_irq(priv->intr_id);
 }
 
 
@@ -1288,8 +1314,9 @@ static int tile_net_open_inner(struct net_device *dev)
 	int my_cpu = smp_processor_id();
 	struct tile_net_cpu *info;
 	struct tile_netio_queue *queue;
-	unsigned int irq;
+	int result = 0;
 	int i;
+	int dummy = 0;
 
 	/*
 	 * First try to register just on the local CPU, and handle any
@@ -1307,42 +1334,52 @@ static int tile_net_open_inner(struct net_device *dev)
 	/*
 	 * Now register everywhere else.  If any registration fails,
 	 * even for "link down" (which might not be possible), we
-	 * clean up using "tile_net_stop_aux()".
+	 * clean up using "tile_net_stop_aux()".  Also, add all the
+	 * "napi" objects (sequentially, to protect "dev->napi_list").
+	 * ISSUE: Only use "netif_napi_add()" for "network cpus"?
 	 */
 	smp_call_function(tile_net_register, (void *)dev, 1);
 	for_each_online_cpu(i) {
-		if (!priv->cpu[i]->registered) {
-			tile_net_stop_aux(dev);
-			return -EAGAIN;
-		}
+		struct tile_net_cpu *info = priv->cpu[i];
+		if (info->registered)
+			netif_napi_add(dev, &info->napi, tile_net_poll, 64);
+		else
+			result = -EAGAIN;
+	}
+	if (result != 0) {
+		tile_net_stop_aux(dev);
+		return result;
 	}
 
 	queue = &info->queue;
 
-	/*
-	 * Set the device intr bit mask.
-	 * The tile_net_register above sets per tile __intr_id.
-	 */
-	priv->intr_id = queue->__system_part->__intr_id;
-	BUG_ON(!priv->intr_id);
-
-	/*
-	 * Register the device interrupt handler.
-	 * The __ffs() function returns the index into the interrupt handler
-	 * table from the interrupt bit mask which should have one bit
-	 * and one bit only set.
-	 */
-	irq = __ffs(priv->intr_id);
-	tile_irq_activate(irq, TILE_IRQ_PERCPU);
-	BUG_ON(request_irq(irq, tile_net_handle_ingress_interrupt,
-			   0, dev->name, (void *)dev) != 0);
+	if (priv->intr_id == 0) {
+		unsigned int irq;
 
-	/* ISSUE: How could "priv->fully_opened" ever be "true" here? */
-
-	if (!priv->fully_opened) {
+		/*
+		 * Acquire the irq allocated by the hypervisor.  Every
+		 * queue gets the same irq.  The "__intr_id" field is
+		 * "1 << irq", so we use "__ffs()" to extract "irq".
+		 */
+		priv->intr_id = queue->__system_part->__intr_id;
+		BUG_ON(priv->intr_id == 0);
+		irq = __ffs(priv->intr_id);
 
-		int dummy = 0;
+		/*
+		 * Register the ingress interrupt handler for this
+		 * device, permanently.
+		 *
+		 * We used to call "free_irq()" in "tile_net_stop()",
+		 * and then re-register the handler here every time,
+		 * but that caused DNP errors in "handle_IRQ_event()"
+		 * because "desc->action" was NULL.  See bug 9143.
+		 */
+		tile_irq_activate(irq, TILE_IRQ_PERCPU);
+		BUG_ON(request_irq(irq, tile_net_handle_ingress_interrupt,
+				   0, dev->name, (void *)dev) != 0);
+	}
 
+	{
 		/* Allocate initial buffers. */
 
 		int max_buffers =
@@ -1359,18 +1396,21 @@ static int tile_net_open_inner(struct net_device *dev)
 		if (info->num_needed_small_buffers != 0 ||
 		    info->num_needed_large_buffers != 0)
 			panic("Insufficient memory for buffer stack!");
+	}
 
-		/* Start LIPP/LEPP and activate "ingress" at the shim. */
-		if (hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy,
-				  sizeof(dummy), NETIO_IPP_INPUT_INIT_OFF) < 0)
-			panic("Failed to activate the LIPP Shim!\n");
+	/* We are about to be active. */
+	priv->active = true;
 
-		priv->fully_opened = 1;
-	}
+	/* Make sure "active" is visible to all tiles. */
+	mb();
 
-	/* On each tile, enable the hypervisor to trigger interrupts. */
-	/* ISSUE: Do this before starting LIPP/LEPP? */
-	on_each_cpu(tile_net_enable_intr, (void *)dev, 1);
+	/* On each tile, enable NAPI and the ingress interrupt. */
+	on_each_cpu(tile_net_open_enable, (void *)dev, 1);
+
+	/* Start LIPP/LEPP and activate "ingress" at the shim. */
+	if (hv_dev_pwrite(priv->hv_devhdl, 0, (HV_VirtAddr)&dummy,
+			  sizeof(dummy), NETIO_IPP_INPUT_INIT_OFF) < 0)
+		panic("Failed to activate the LIPP Shim!\n");
 
 	/* Start our transmit queue. */
 	netif_start_queue(dev);
@@ -1396,9 +1436,9 @@ static void tile_net_open_retry(struct work_struct *w)
 	 * ourselves to try again later; otherwise, tell Linux we now have
 	 * a working link.  ISSUE: What if the return value is negative?
 	 */
-	if (tile_net_open_inner(priv->dev))
-		schedule_delayed_work_on(singlethread_cpu, &priv->retry_work,
-					 TILE_NET_RETRY_INTERVAL);
+	if (tile_net_open_inner(priv->dev) != 0)
+		schedule_delayed_work(&priv->retry_work,
+				      TILE_NET_RETRY_INTERVAL);
 	else
 		netif_carrier_on(priv->dev);
 }
@@ -1412,8 +1452,8 @@ static void tile_net_open_retry(struct work_struct *w)
  * The open entry point is called when a network interface is made
  * active by the system (IFF_UP).  At this point all resources needed
  * for transmit and receive operations are allocated, the interrupt
- * handler is registered with the OS, the watchdog timer is started,
- * and the stack is notified that the interface is ready.
+ * handler is registered with the OS (if needed), the watchdog timer
+ * is started, and the stack is notified that the interface is ready.
  *
  * If the actual link is not available yet, then we tell Linux that
  * we have no carrier, and we keep checking until the link comes up.
@@ -1468,6 +1508,10 @@ static int tile_net_open(struct net_device *dev)
 #endif
 
 		priv->partly_opened = 1;
+
+	} else {
+		/* FIXME: Is this possible? */
+		/* printk("Already partly opened.\n"); */
 	}
 
 	/*
@@ -1487,57 +1531,17 @@ static int tile_net_open(struct net_device *dev)
 	 * and then remember to try again later.
 	 */
 	netif_carrier_off(dev);
-	schedule_delayed_work_on(singlethread_cpu, &priv->retry_work,
-				 TILE_NET_RETRY_INTERVAL);
+	schedule_delayed_work(&priv->retry_work, TILE_NET_RETRY_INTERVAL);
 
 	return 0;
 }
 
 
-/*
- * Disables a network interface.
- *
- * Returns 0, this is not allowed to fail.
- *
- * The close entry point is called when an interface is de-activated
- * by the OS.  The hardware is still under the drivers control, but
- * needs to be disabled.  A global MAC reset is issued to stop the
- * hardware, and all transmit and receive resources are freed.
- *
- * ISSUE: Can this can be called while "tile_net_poll()" is running?
- */
-static int tile_net_stop(struct net_device *dev)
+static int tile_net_drain_lipp_buffers(struct tile_net_priv *priv)
 {
-	struct tile_net_priv *priv = netdev_priv(dev);
-
-	bool pending = true;
-
-	PDEBUG("tile_net_stop()\n");
-
-	/* ISSUE: Only needed if not yet fully open. */
-	cancel_delayed_work_sync(&priv->retry_work);
-
-	/* Can't transmit any more. */
-	netif_stop_queue(dev);
-
-	/*
-	 * Disable hypervisor interrupts on each tile.
-	 */
-	on_each_cpu(tile_net_disable_intr, (void *)dev, 1);
-
-	/*
-	 * Unregister the interrupt handler.
-	 * The __ffs() function returns the index into the interrupt handler
-	 * table from the interrupt bit mask which should have one bit
-	 * and one bit only set.
-	 */
-	if (priv->intr_id)
-		free_irq(__ffs(priv->intr_id), dev);
-
-	/*
-	 * Drain all the LIPP buffers.
-	 */
+	int n = 0;
 
+	/* Drain all the LIPP buffers. */
 	while (true) {
 		int buffer;
 
@@ -1560,43 +1564,105 @@ static int tile_net_stop(struct net_device *dev)
 
 			kfree_skb(skb);
 		}
+
+		n++;
 	}
 
-	/* Stop LIPP/LEPP. */
-	tile_net_stop_aux(dev);
+	return n;
+}
 
 
-	priv->fully_opened = 0;
+/*
+ * Disables a network interface.
+ *
+ * Returns 0, this is not allowed to fail.
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS.  The hardware is still under the drivers control, but
+ * needs to be disabled.  A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ *
+ * ISSUE: How closely does "netif_running(dev)" mirror "priv->active"?
+ *
+ * Before we are called by "__dev_close()", "netif_running()" will
+ * have been cleared, so no NEW calls to "tile_net_poll()" will be
+ * made by "netpoll_poll_dev()".
+ *
+ * Often, this can cause some tiles to still have packets in their
+ * queues, so we must call "tile_net_discard_packets()" later.
+ *
+ * Note that some other tile may still be INSIDE "tile_net_poll()",
+ * and in fact, many will be, if there is heavy network load.
+ *
+ * Calling "on_each_cpu(tile_net_stop_disable, (void *)dev, 1)" when
+ * any tile is still "napi_schedule()"'d will induce a horrible crash
+ * when "msleep()" is called.  This includes tiles which are inside
+ * "tile_net_poll()" which have not yet called "napi_complete()".
+ *
+ * So, we must first try to wait long enough for other tiles to finish
+ * with any current "tile_net_poll()" call, and, hopefully, to clear
+ * the "scheduled" flag.  ISSUE: It is unclear what happens to tiles
+ * which have called "napi_schedule()" but which had not yet tried to
+ * call "tile_net_poll()", or which exhausted their budget inside
+ * "tile_net_poll()" just before this function was called.
+ */
+static int tile_net_stop(struct net_device *dev)
+{
+	struct tile_net_priv *priv = netdev_priv(dev);
+
+	PDEBUG("tile_net_stop()\n");
 
+	/* Start discarding packets. */
+	priv->active = false;
+
+	/* Make sure "active" is visible to all tiles. */
+	mb();
 
 	/*
-	 * XXX: ISSUE: It appears that, in practice anyway, by the
-	 * time we get here, there are no pending completions.
+	 * On each tile, make sure no NEW packets get delivered, and
+	 * disable the ingress interrupt.
+	 *
+	 * Note that the ingress interrupt can fire AFTER this,
+	 * presumably due to packets which were recently delivered,
+	 * but it will have no effect.
 	 */
-	while (pending) {
+	on_each_cpu(tile_net_deregister, (void *)dev, 1);
 
-		struct sk_buff *olds[32];
-		unsigned int wanted = 32;
-		unsigned int i, nolds = 0;
+	/* Optimistically drain LIPP buffers. */
+	(void)tile_net_drain_lipp_buffers(priv);
 
-		nolds = tile_net_lepp_grab_comps(dev, olds,
-						 wanted, &pending);
+	/* ISSUE: Only needed if not yet fully open. */
+	cancel_delayed_work_sync(&priv->retry_work);
 
-		/* ISSUE: We have never actually seen this debug spew. */
-		if (nolds != 0)
-			pr_info("During tile_net_stop(), grabbed %d comps.\n",
-			       nolds);
+	/* Can't transmit any more. */
+	netif_stop_queue(dev);
 
-		for (i = 0; i < nolds; i++)
-			kfree_skb(olds[i]);
-	}
+	/* Disable NAPI on each tile. */
+	on_each_cpu(tile_net_stop_disable, (void *)dev, 1);
+
+	/*
+	 * Drain any remaining LIPP buffers.  NOTE: This "printk()"
+	 * has never been observed, but in theory it could happen.
+	 */
+	if (tile_net_drain_lipp_buffers(priv) != 0)
+		printk("Had to drain some extra LIPP buffers!\n");
 
+	/* Stop LIPP/LEPP. */
+	tile_net_stop_aux(dev);
+
+	/*
+	 * ISSUE: It appears that, in practice anyway, by the time we
+	 * get here, there are no pending completions, but just in case,
+	 * we free (all of) them anyway.
+	 */
+	while (tile_net_lepp_free_comps(dev, true))
+		/* loop */;
 
 	/* Wipe the EPP queue. */
-	memset(priv->epp_queue, 0, sizeof(lepp_queue_t));
+	memset(priv->eq, 0, sizeof(lepp_queue_t));
 
 	/* Evict the EPP queue. */
-	finv_buffer(priv->epp_queue, PAGE_SIZE);
+	finv_buffer(priv->eq, EQ_SIZE);
 
 	return 0;
 }
@@ -1620,7 +1686,7 @@ static unsigned int tile_net_tx_frags(lepp_frag_t *frags,
 	if (b_len != 0) {
 
 		if (!hash_default)
-			finv_buffer_remote(b_data, b_len);
+			finv_buffer_remote(b_data, b_len, 0);
 
 		cpa = __pa(b_data);
 		frags[n].cpa_lo = cpa;
@@ -1643,7 +1709,7 @@ static unsigned int tile_net_tx_frags(lepp_frag_t *frags,
 		if (!hash_default) {
 			void *va = pfn_to_kaddr(pfn) + f->page_offset;
 			BUG_ON(PageHighMem(f->page));
-			finv_buffer_remote(va, f->size);
+			finv_buffer_remote(va, f->size, 0);
 		}
 
 		cpa = ((phys_addr_t)pfn << PAGE_SHIFT) + f->page_offset;
@@ -1742,17 +1808,15 @@ static int tile_net_tx_tso(struct sk_buff *skb, struct net_device *dev)
 
 	unsigned long irqflags;
 
-	lepp_queue_t *eq = priv->epp_queue;
+	lepp_queue_t *eq = priv->eq;
 
-	struct sk_buff *olds[4];
-	unsigned int wanted = 4;
+	struct sk_buff *olds[8];
+	unsigned int wanted = 8;
 	unsigned int i, nolds = 0;
 
 	unsigned int cmd_head, cmd_tail, cmd_next;
 	unsigned int comp_tail;
 
-	unsigned int free_slots;
-
 
 	/* Paranoia. */
 	BUG_ON(skb->protocol != htons(ETH_P_IP));
@@ -1780,34 +1844,32 @@ static int tile_net_tx_tso(struct sk_buff *skb, struct net_device *dev)
 
 	/* Enqueue the command. */
 
-	spin_lock_irqsave(&priv->cmd_lock, irqflags);
+	spin_lock_irqsave(&priv->eq_lock, irqflags);
 
 	/*
 	 * Handle completions if needed to make room.
 	 * HACK: Spin until there is sufficient room.
 	 */
-	free_slots = lepp_num_free_comp_slots(eq);
-	if (free_slots < 1) {
-spin:
-		nolds += tile_net_lepp_grab_comps(dev, olds + nolds,
-						  wanted - nolds, NULL);
-		if (lepp_num_free_comp_slots(eq) < 1)
-			goto spin;
+	if (lepp_num_free_comp_slots(eq) == 0) {
+		nolds = tile_net_lepp_grab_comps(eq, olds, wanted, 0);
+		if (nolds == 0) {
+busy:
+			spin_unlock_irqrestore(&priv->eq_lock, irqflags);
+			return NETDEV_TX_BUSY;
+		}
 	}
 
 	cmd_head = eq->cmd_head;
 	cmd_tail = eq->cmd_tail;
 
-	/* NOTE: The "gotos" below are untested. */
-
 	/* Prepare to advance, detecting full queue. */
 	cmd_next = cmd_tail + cmd_size;
 	if (cmd_tail < cmd_head && cmd_next >= cmd_head)
-		goto spin;
+		goto busy;
 	if (cmd_next > LEPP_CMD_LIMIT) {
 		cmd_next = 0;
 		if (cmd_next == cmd_head)
-			goto spin;
+			goto busy;
 	}
 
 	/* Copy the command. */
@@ -1823,14 +1885,18 @@ spin:
 	eq->comp_tail = comp_tail;
 
 	/* Flush before allowing LEPP to handle the command. */
+	/* ISSUE: Is this the optimal location for the flush? */
 	__insn_mf();
 
 	eq->cmd_tail = cmd_tail;
 
-	spin_unlock_irqrestore(&priv->cmd_lock, irqflags);
-
+	/* NOTE: Using "4" here is more efficient than "0" or "2", */
+	/* and, strangely, more efficient than pre-checking the number */
+	/* of available completions, and comparing it to 4. */
 	if (nolds == 0)
-		nolds = tile_net_lepp_grab_comps(dev, olds, wanted, NULL);
+		nolds = tile_net_lepp_grab_comps(eq, olds, wanted, 4);
+
+	spin_unlock_irqrestore(&priv->eq_lock, irqflags);
 
 	/* Handle completions. */
 	for (i = 0; i < nolds; i++)
@@ -1870,10 +1936,10 @@ static int tile_net_tx(struct sk_buff *skb, struct net_device *dev)
 
 	unsigned int num_frags;
 
-	lepp_queue_t *eq = priv->epp_queue;
+	lepp_queue_t *eq = priv->eq;
 
-	struct sk_buff *olds[4];
-	unsigned int wanted = 4;
+	struct sk_buff *olds[8];
+	unsigned int wanted = 8;
 	unsigned int i, nolds = 0;
 
 	unsigned int cmd_size = sizeof(lepp_cmd_t);
@@ -1883,8 +1949,6 @@ static int tile_net_tx(struct sk_buff *skb, struct net_device *dev)
 
 	lepp_cmd_t cmds[LEPP_MAX_FRAGS];
 
-	unsigned int free_slots;
-
 
 	/*
 	 * This is paranoia, since we think that if the link doesn't come
@@ -1905,7 +1969,8 @@ static int tile_net_tx(struct sk_buff *skb, struct net_device *dev)
 	if (hash_default) {
 		HV_PTE pte = *virt_to_pte(current->mm, (unsigned long)data);
 		if (hv_pte_get_mode(pte) != HV_PTE_MODE_CACHE_HASH_L3)
-			panic("Non-coherent egress buffer!");
+			panic("Non-HFH egress buffer! VA=%p Mode=%d PTE=%llx",
+			      data, hv_pte_get_mode(pte), hv_pte_val(pte));
 	}
 #endif
 #endif
@@ -1958,37 +2023,35 @@ static int tile_net_tx(struct sk_buff *skb, struct net_device *dev)
 
 	/* Enqueue the commands. */
 
-	spin_lock_irqsave(&priv->cmd_lock, irqflags);
+	spin_lock_irqsave(&priv->eq_lock, irqflags);
 
 	/*
 	 * Handle completions if needed to make room.
 	 * HACK: Spin until there is sufficient room.
 	 */
-	free_slots = lepp_num_free_comp_slots(eq);
-	if (free_slots < 1) {
-spin:
-		nolds += tile_net_lepp_grab_comps(dev, olds + nolds,
-						  wanted - nolds, NULL);
-		if (lepp_num_free_comp_slots(eq) < 1)
-			goto spin;
+	if (lepp_num_free_comp_slots(eq) == 0) {
+		nolds = tile_net_lepp_grab_comps(eq, olds, wanted, 0);
+		if (nolds == 0) {
+busy:
+			spin_unlock_irqrestore(&priv->eq_lock, irqflags);
+			return NETDEV_TX_BUSY;
+		}
 	}
 
 	cmd_head = eq->cmd_head;
 	cmd_tail = eq->cmd_tail;
 
-	/* NOTE: The "gotos" below are untested. */
-
 	/* Copy the commands, or fail. */
 	for (i = 0; i < num_frags; i++) {
 
 		/* Prepare to advance, detecting full queue. */
 		cmd_next = cmd_tail + cmd_size;
 		if (cmd_tail < cmd_head && cmd_next >= cmd_head)
-			goto spin;
+			goto busy;
 		if (cmd_next > LEPP_CMD_LIMIT) {
 			cmd_next = 0;
 			if (cmd_next == cmd_head)
-				goto spin;
+				goto busy;
 		}
 
 		/* Copy the command. */
@@ -2005,14 +2068,18 @@ spin:
 	eq->comp_tail = comp_tail;
 
 	/* Flush before allowing LEPP to handle the command. */
+	/* ISSUE: Is this the optimal location for the flush? */
 	__insn_mf();
 
 	eq->cmd_tail = cmd_tail;
 
-	spin_unlock_irqrestore(&priv->cmd_lock, irqflags);
-
+	/* NOTE: Using "4" here is more efficient than "0" or "2", */
+	/* and, strangely, more efficient than pre-checking the number */
+	/* of available completions, and comparing it to 4. */
 	if (nolds == 0)
-		nolds = tile_net_lepp_grab_comps(dev, olds, wanted, NULL);
+		nolds = tile_net_lepp_grab_comps(eq, olds, wanted, 4);
+
+	spin_unlock_irqrestore(&priv->eq_lock, irqflags);
 
 	/* Handle completions. */
 	for (i = 0; i < nolds; i++)
@@ -2261,7 +2328,6 @@ static struct net_device *tile_net_dev_init(const char *name)
 	int ret;
 	struct net_device *dev;
 	struct tile_net_priv *priv;
-	struct page *page;
 
 	/*
 	 * Allocate the device structure.  This allocates "priv", calls
@@ -2285,23 +2351,21 @@ static struct net_device *tile_net_dev_init(const char *name)
 
 	INIT_DELAYED_WORK(&priv->retry_work, tile_net_open_retry);
 
-	spin_lock_init(&priv->cmd_lock);
-	spin_lock_init(&priv->comp_lock);
+	spin_lock_init(&priv->eq_lock);
 
-	/* Allocate "epp_queue". */
-	BUG_ON(get_order(sizeof(lepp_queue_t)) != 0);
-	page = alloc_pages(GFP_KERNEL | __GFP_ZERO, 0);
-	if (!page) {
+	/* Allocate "eq". */
+	priv->eq_pages = alloc_pages(GFP_KERNEL | __GFP_ZERO, EQ_ORDER);
+	if (!priv->eq_pages) {
 		free_netdev(dev);
 		return NULL;
 	}
-	priv->epp_queue = page_address(page);
+	priv->eq = page_address(priv->eq_pages);
 
 	/* Register the network device. */
 	ret = register_netdev(dev);
 	if (ret) {
 		pr_err("register_netdev %s failed %d\n", dev->name, ret);
-		free_page((unsigned long)priv->epp_queue);
+		__free_pages(priv->eq_pages, EQ_ORDER);
 		free_netdev(dev);
 		return NULL;
 	}
@@ -2310,7 +2374,7 @@ static struct net_device *tile_net_dev_init(const char *name)
 	ret = tile_net_get_mac(dev);
 	if (ret < 0) {
 		unregister_netdev(dev);
-		free_page((unsigned long)priv->epp_queue);
+		__free_pages(priv->eq_pages, EQ_ORDER);
 		free_netdev(dev);
 		return NULL;
 	}
@@ -2321,6 +2385,9 @@ static struct net_device *tile_net_dev_init(const char *name)
 
 /*
  * Module cleanup.
+ *
+ * FIXME: If compiled as a module, this module cannot be "unloaded",
+ * because the "ingress interrupt handler" is registered permanently.
  */
 static void tile_net_cleanup(void)
 {
@@ -2331,8 +2398,8 @@ static void tile_net_cleanup(void)
 			struct net_device *dev = tile_net_devs[i];
 			struct tile_net_priv *priv = netdev_priv(dev);
 			unregister_netdev(dev);
-			finv_buffer(priv->epp_queue, PAGE_SIZE);
-			free_page((unsigned long)priv->epp_queue);
+			finv_buffer(priv->eq, EQ_SIZE);
+			__free_pages(priv->eq_pages, EQ_ORDER);
 			free_netdev(dev);
 		}
 	}
@@ -2355,7 +2422,12 @@ static int tile_net_init_module(void)
 }
 
 
+module_init(tile_net_init_module);
+module_exit(tile_net_cleanup);
+
+
 #ifndef MODULE
+
 /*
  * The "network_cpus" boot argument specifies the cpus that are dedicated
  * to handle ingress packets.
@@ -2391,8 +2463,5 @@ static int __init network_cpus_setup(char *str)
 	return 0;
 }
 __setup("network_cpus=", network_cpus_setup);
-#endif
-
 
-module_init(tile_net_init_module);
-module_exit(tile_net_cleanup);
+#endif