diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2011-03-16 15:04:26 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2011-03-16 15:04:26 -0700 |
| commit | 971f115a50afbe409825c9f3399d5a3b9aca4381 (patch) | |
| tree | cb42dc07a032e325f22b64d961587c081225c6d6 /drivers | |
| parent | 2e270d84223262a38d4755c61d55f5c73ea89e56 (diff) | |
| parent | 500132a0f26ad7d9916102193cbc6c1b1becb373 (diff) | |
Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (172 commits)
USB: Add support for SuperSpeed isoc endpoints
xhci: Clean up cycle bit math used during stalls.
xhci: Fix cycle bit calculation during stall handling.
xhci: Update internal dequeue pointers after stalls.
USB: Disable auto-suspend for USB 3.0 hubs.
USB: Remove bogus USB_PORT_STAT_SUPER_SPEED symbol.
xhci: Return canceled URBs immediately when host is halted.
xhci: Fixes for suspend/resume of shared HCDs.
xhci: Fix re-init on power loss after resume.
xhci: Make roothub functions deal with device removal.
xhci: Limit roothub ports to 15 USB3 & 31 USB2 ports.
xhci: Return a USB 3.0 hub descriptor for USB3 roothub.
xhci: Register second xHCI roothub.
xhci: Change xhci_find_slot_id_by_port() API.
xhci: Refactor bus suspend state into a struct.
xhci: Index with a port array instead of PORTSC addresses.
USB: Set usb_hcd->state and flags for shared roothubs.
usb: Make core allocate resources per PCI-device.
usb: Store bus type in usb_hcd, not in driver flags.
usb: Change usb_hcd->bandwidth_mutex to a pointer.
...
Diffstat (limited to 'drivers')
115 files changed, 9178 insertions, 3592 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index fd018366d670..a6dfa37a674d 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -624,6 +624,15 @@ config MFD_WL1273_CORE driver connects the radio-wl1273 V4L2 module and the wl1273 audio codec. +config MFD_OMAP_USB_HOST + bool "Support OMAP USBHS core driver" + depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3 + default y + help + This is the core driver for the OAMP EHCI and OHCI drivers. + This MFD driver does the required setup functionalities for + OMAP USB Host drivers. + endif # MFD_SUPPORT menu "Multimedia Capabilities Port drivers" diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index a54e2c7c6a1c..91fe384459ab 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -83,3 +83,4 @@ obj-$(CONFIG_MFD_TPS6586X) += tps6586x.o obj-$(CONFIG_MFD_VX855) += vx855.o obj-$(CONFIG_MFD_WL1273_CORE) += wl1273-core.o obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o +obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c new file mode 100644 index 000000000000..cb01209754e0 --- /dev/null +++ b/drivers/mfd/omap-usb-host.c @@ -0,0 +1,1061 @@ +/** + * omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com + * Author: Keshava Munegowda <keshava_mgowda@ti.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 of + * the License as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/dma-mapping.h> +#include <linux/spinlock.h> +#include <linux/gpio.h> +#include <linux/regulator/consumer.h> +#include <plat/usb.h> + +#define USBHS_DRIVER_NAME "usbhs-omap" +#define OMAP_EHCI_DEVICE "ehci-omap" +#define OMAP_OHCI_DEVICE "ohci-omap3" + +/* OMAP USBHOST Register addresses */ + +/* TLL Register Set */ +#define OMAP_USBTLL_REVISION (0x00) +#define OMAP_USBTLL_SYSCONFIG (0x10) +#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8) +#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3) +#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2) +#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1) +#define OMAP_USBTLL_SYSCONFIG_AUTOIDLE (1 << 0) + +#define OMAP_USBTLL_SYSSTATUS (0x14) +#define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0) + +#define OMAP_USBTLL_IRQSTATUS (0x18) +#define OMAP_USBTLL_IRQENABLE (0x1C) + +#define OMAP_TLL_SHARED_CONF (0x30) +#define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN (1 << 6) +#define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN (1 << 5) +#define OMAP_TLL_SHARED_CONF_USB_DIVRATION (1 << 2) +#define OMAP_TLL_SHARED_CONF_FCLK_REQ (1 << 1) +#define OMAP_TLL_SHARED_CONF_FCLK_IS_ON (1 << 0) + +#define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num) +#define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT 24 +#define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11) +#define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10) +#define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9) +#define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8) +#define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS (1 << 1) +#define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0) + +#define OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0 0x0 +#define OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM 0x1 +#define OMAP_TLL_FSLSMODE_3PIN_PHY 0x2 +#define OMAP_TLL_FSLSMODE_4PIN_PHY 0x3 +#define OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0 0x4 +#define OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM 0x5 +#define OMAP_TLL_FSLSMODE_3PIN_TLL 0x6 +#define OMAP_TLL_FSLSMODE_4PIN_TLL 0x7 +#define OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0 0xA +#define OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM 0xB + +#define OMAP_TLL_ULPI_FUNCTION_CTRL(num) (0x804 + 0x100 * num) +#define OMAP_TLL_ULPI_INTERFACE_CTRL(num) (0x807 + 0x100 * num) +#define OMAP_TLL_ULPI_OTG_CTRL(num) (0x80A + 0x100 * num) +#define OMAP_TLL_ULPI_INT_EN_RISE(num) (0x80D + 0x100 * num) +#define OMAP_TLL_ULPI_INT_EN_FALL(num) (0x810 + 0x100 * num) +#define OMAP_TLL_ULPI_INT_STATUS(num) (0x813 + 0x100 * num) +#define OMAP_TLL_ULPI_INT_LATCH(num) (0x814 + 0x100 * num) +#define OMAP_TLL_ULPI_DEBUG(num) (0x815 + 0x100 * num) +#define OMAP_TLL_ULPI_SCRATCH_REGISTER(num) (0x816 + 0x100 * num) + +#define OMAP_TLL_CHANNEL_COUNT 3 +#define OMAP_TLL_CHANNEL_1_EN_MASK (1 << 0) +#define OMAP_TLL_CHANNEL_2_EN_MASK (1 << 1) +#define OMAP_TLL_CHANNEL_3_EN_MASK (1 << 2) + +/* UHH Register Set */ +#define OMAP_UHH_REVISION (0x00) +#define OMAP_UHH_SYSCONFIG (0x10) +#define OMAP_UHH_SYSCONFIG_MIDLEMODE (1 << 12) +#define OMAP_UHH_SYSCONFIG_CACTIVITY (1 << 8) +#define OMAP_UHH_SYSCONFIG_SIDLEMODE (1 << 3) +#define OMAP_UHH_SYSCONFIG_ENAWAKEUP (1 << 2) +#define OMAP_UHH_SYSCONFIG_SOFTRESET (1 << 1) +#define OMAP_UHH_SYSCONFIG_AUTOIDLE (1 << 0) + +#define OMAP_UHH_SYSSTATUS (0x14) +#define OMAP_UHH_HOSTCONFIG (0x40) +#define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS (1 << 0) +#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS (1 << 0) +#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11) +#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12) +#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2) +#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3) +#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4) +#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN (1 << 5) +#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS (1 << 8) +#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS (1 << 9) +#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS (1 << 10) +#define OMAP4_UHH_HOSTCONFIG_APP_START_CLK (1 << 31) + +/* OMAP4-specific defines */ +#define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR (3 << 2) +#define OMAP4_UHH_SYSCONFIG_NOIDLE (1 << 2) +#define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR (3 << 4) +#define OMAP4_UHH_SYSCONFIG_NOSTDBY (1 << 4) +#define OMAP4_UHH_SYSCONFIG_SOFTRESET (1 << 0) + +#define OMAP4_P1_MODE_CLEAR (3 << 16) +#define OMAP4_P1_MODE_TLL (1 << 16) +#define OMAP4_P1_MODE_HSIC (3 << 16) +#define OMAP4_P2_MODE_CLEAR (3 << 18) +#define OMAP4_P2_MODE_TLL (1 << 18) +#define OMAP4_P2_MODE_HSIC (3 << 18) + +#define OMAP_REV2_TLL_CHANNEL_COUNT 2 + +#define OMAP_UHH_DEBUG_CSR (0x44) + +/* Values of UHH_REVISION - Note: these are not given in the TRM */ +#define OMAP_USBHS_REV1 0x00000010 /* OMAP3 */ +#define OMAP_USBHS_REV2 0x50700100 /* OMAP4 */ + +#define is_omap_usbhs_rev1(x) (x->usbhs_rev == OMAP_USBHS_REV1) +#define is_omap_usbhs_rev2(x) (x->usbhs_rev == OMAP_USBHS_REV2) + +#define is_ehci_phy_mode(x) (x == OMAP_EHCI_PORT_MODE_PHY) +#define is_ehci_tll_mode(x) (x == OMAP_EHCI_PORT_MODE_TLL) +#define is_ehci_hsic_mode(x) (x == OMAP_EHCI_PORT_MODE_HSIC) + + +struct usbhs_hcd_omap { + struct clk *usbhost_ick; + struct clk *usbhost_hs_fck; + struct clk *usbhost_fs_fck; + struct clk *xclk60mhsp1_ck; + struct clk *xclk60mhsp2_ck; + struct clk *utmi_p1_fck; + struct clk *usbhost_p1_fck; + struct clk *usbtll_p1_fck; + struct clk *utmi_p2_fck; + struct clk *usbhost_p2_fck; + struct clk *usbtll_p2_fck; + struct clk *init_60m_fclk; + struct clk *usbtll_fck; + struct clk *usbtll_ick; + + void __iomem *uhh_base; + void __iomem *tll_base; + + struct usbhs_omap_platform_data platdata; + + u32 usbhs_rev; + spinlock_t lock; + int count; +}; +/*-------------------------------------------------------------------------*/ + +const char usbhs_driver_name[] = USBHS_DRIVER_NAME; +static u64 usbhs_dmamask = ~(u32)0; + +/*-------------------------------------------------------------------------*/ + +static inline void usbhs_write(void __iomem *base, u32 reg, u32 val) +{ + __raw_writel(val, base + reg); +} + +static inline u32 usbhs_read(void __iomem *base, u32 reg) +{ + return __raw_readl(base + reg); +} + +static inline void usbhs_writeb(void __iomem *base, u8 reg, u8 val) +{ + __raw_writeb(val, base + reg); +} + +static inline u8 usbhs_readb(void __iomem *base, u8 reg) +{ + return __raw_readb(base + reg); +} + +/*-------------------------------------------------------------------------*/ + +static struct platform_device *omap_usbhs_alloc_child(const char *name, + struct resource *res, int num_resources, void *pdata, + size_t pdata_size, struct device *dev) +{ + struct platform_device *child; + int ret; + + child = platform_device_alloc(name, 0); + + if (!child) { + dev_err(dev, "platform_device_alloc %s failed\n", name); + goto err_end; + } + + ret = platform_device_add_resources(child, res, num_resources); + if (ret) { + dev_err(dev, "platform_device_add_resources failed\n"); + goto err_alloc; + } + + ret = platform_device_add_data(child, pdata, pdata_size); + if (ret) { + dev_err(dev, "platform_device_add_data failed\n"); + goto err_alloc; + } + + child->dev.dma_mask = &usbhs_dmamask; + child->dev.coherent_dma_mask = 0xffffffff; + child->dev.parent = dev; + + ret = platform_device_add(child); + if (ret) { + dev_err(dev, "platform_device_add failed\n"); + goto err_alloc; + } + + return child; + +err_alloc: + platform_device_put(child); + +err_end: + return NULL; +} + +static int omap_usbhs_alloc_children(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct usbhs_hcd_omap *omap; + struct ehci_hcd_omap_platform_data *ehci_data; + struct ohci_hcd_omap_platform_data *ohci_data; + struct platform_device *ehci; + struct platform_device *ohci; + struct resource *res; + struct resource resources[2]; + int ret; + + omap = platform_get_drvdata(pdev); + ehci_data = omap->platdata.ehci_data; + ohci_data = omap->platdata.ohci_data; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci"); + if (!res) { + dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n"); + ret = -ENODEV; + goto err_end; + } + resources[0] = *res; + + res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ehci-irq"); + if (!res) { + dev_err(dev, " EHCI get resource IORESOURCE_IRQ failed\n"); + ret = -ENODEV; + goto err_end; + } + resources[1] = *res; + + ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, ehci_data, + sizeof(*ehci_data), dev); + + if (!ehci) { + dev_err(dev, "omap_usbhs_alloc_child failed\n"); + goto err_end; + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci"); + if (!res) { + dev_err(dev, "OHCI get resource IORESOURCE_MEM failed\n"); + ret = -ENODEV; + goto err_ehci; + } + resources[0] = *res; + + res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ohci-irq"); + if (!res) { + dev_err(dev, "OHCI get resource IORESOURCE_IRQ failed\n"); + ret = -ENODEV; + goto err_ehci; + } + resources[1] = *res; + + ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, ohci_data, + sizeof(*ohci_data), dev); + if (!ohci) { + dev_err(dev, "omap_usbhs_alloc_child failed\n"); + goto err_ehci; + } + + return 0; + +err_ehci: + platform_device_put(ehci); + +err_end: + return ret; +} + +/** + * usbhs_omap_probe - initialize TI-based HCDs + * + * Allocates basic resources for this USB host controller. + */ +static int __devinit usbhs_omap_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct usbhs_omap_platform_data *pdata = dev->platform_data; + struct usbhs_hcd_omap *omap; + struct resource *res; + int ret = 0; + int i; + + if (!pdata) { + dev_err(dev, "Missing platfrom data\n"); + ret = -ENOMEM; + goto end_probe; + } + + omap = kzalloc(sizeof(*omap), GFP_KERNEL); + if (!omap) { + dev_err(dev, "Memory allocation failed\n"); + ret = -ENOMEM; + goto end_probe; + } + + spin_lock_init(&omap->lock); + + for (i = 0; i < OMAP3_HS_USB_PORTS; i++) + omap->platdata.port_mode[i] = pdata->port_mode[i]; + + omap->platdata.ehci_data = pdata->ehci_data; + omap->platdata.ohci_data = pdata->ohci_data; + + omap->usbhost_ick = clk_get(dev, "usbhost_ick"); + if (IS_ERR(omap->usbhost_ick)) { + ret = PTR_ERR(omap->usbhost_ick); + dev_err(dev, "usbhost_ick failed error:%d\n", ret); + goto err_end; + } + + omap->usbhost_hs_fck = clk_get(dev, "hs_fck"); + if (IS_ERR(omap->usbhost_hs_fck)) { + ret = PTR_ERR(omap->usbhost_hs_fck); + dev_err(dev, "usbhost_hs_fck failed error:%d\n", ret); + goto err_usbhost_ick; + } + + omap->usbhost_fs_fck = clk_get(dev, "fs_fck"); + if (IS_ERR(omap->usbhost_fs_fck)) { + ret = PTR_ERR(omap->usbhost_fs_fck); + dev_err(dev, "usbhost_fs_fck failed error:%d\n", ret); + goto err_usbhost_hs_fck; + } + + omap->usbtll_fck = clk_get(dev, "usbtll_fck"); + if (IS_ERR(omap->usbtll_fck)) { + ret = PTR_ERR(omap->usbtll_fck); + dev_err(dev, "usbtll_fck failed error:%d\n", ret); + goto err_usbhost_fs_fck; + } + + omap->usbtll_ick = clk_get(dev, "usbtll_ick"); + if (IS_ERR(omap->usbtll_ick)) { + ret = PTR_ERR(omap->usbtll_ick); + dev_err(dev, "usbtll_ick failed error:%d\n", ret); + goto err_usbtll_fck; + } + + omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk"); + if (IS_ERR(omap->utmi_p1_fck)) { + ret = PTR_ERR(omap->utmi_p1_fck); + dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret); + goto err_usbtll_ick; + } + + omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck"); + if (IS_ERR(omap->xclk60mhsp1_ck)) { + ret = PTR_ERR(omap->xclk60mhsp1_ck); + dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret); + goto err_utmi_p1_fck; + } + + omap->utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk"); + if (IS_ERR(omap->utmi_p2_fck)) { + ret = PTR_ERR(omap->utmi_p2_fck); + dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret); + goto err_xclk60mhsp1_ck; + } + + omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck"); + if (IS_ERR(omap->xclk60mhsp2_ck)) { + ret = PTR_ERR(omap->xclk60mhsp2_ck); + dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret); + goto err_utmi_p2_fck; + } + + omap->usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk"); + if (IS_ERR(omap->usbhost_p1_fck)) { + ret = PTR_ERR(omap->usbhost_p1_fck); + dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret); + goto err_xclk60mhsp2_ck; + } + + omap->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk"); + if (IS_ERR(omap->usbtll_p1_fck)) { + ret = PTR_ERR(omap->usbtll_p1_fck); + dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret); + goto err_usbhost_p1_fck; + } + + omap->usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk"); + if (IS_ERR(omap->usbhost_p2_fck)) { + ret = PTR_ERR(omap->usbhost_p2_fck); + dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret); + goto err_usbtll_p1_fck; + } + + omap->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk"); + if (IS_ERR(omap->usbtll_p2_fck)) { + ret = PTR_ERR(omap->usbtll_p2_fck); + dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret); + goto err_usbhost_p2_fck; + } + + omap->init_60m_fclk = clk_get(dev, "init_60m_fclk"); + if (IS_ERR(omap->init_60m_fclk)) { + ret = PTR_ERR(omap->init_60m_fclk); + dev_err(dev, "init_60m_fclk failed error:%d\n", ret); + goto err_usbtll_p2_fck; + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh"); + if (!res) { + dev_err(dev, "UHH EHCI get resource failed\n"); + ret = -ENODEV; + goto err_init_60m_fclk; + } + + omap->uhh_base = ioremap(res->start, resource_size(res)); + if (!omap->uhh_base) { + dev_err(dev, "UHH ioremap failed\n"); + ret = -ENOMEM; + goto err_init_60m_fclk; + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tll"); + if (!res) { + dev_err(dev, "UHH EHCI get resource failed\n"); + ret = -ENODEV; + goto err_tll; + } + + omap->tll_base = ioremap(res->start, resource_size(res)); + if (!omap->tll_base) { + dev_err(dev, "TLL ioremap failed\n"); + ret = -ENOMEM; + goto err_tll; + } + + platform_set_drvdata(pdev, omap); + + ret = omap_usbhs_alloc_children(pdev); + if (ret) { + dev_err(dev, "omap_usbhs_alloc_children failed\n"); + goto err_alloc; + } + + goto end_probe; + +err_alloc: + iounmap(omap->tll_base); + +err_tll: + iounmap(omap->uhh_base); + +err_init_60m_fclk: + clk_put(omap->init_60m_fclk); + +err_usbtll_p2_fck: + clk_put(omap->usbtll_p2_fck); + +err_usbhost_p2_fck: + clk_put(omap->usbhost_p2_fck); + +err_usbtll_p1_fck: + clk_put(omap->usbtll_p1_fck); + +err_usbhost_p1_fck: + clk_put(omap->usbhost_p1_fck); + +err_xclk60mhsp2_ck: + clk_put(omap->xclk60mhsp2_ck); + +err_utmi_p2_fck: + clk_put(omap->utmi_p2_fck); + +err_xclk60mhsp1_ck: + clk_put(omap->xclk60mhsp1_ck); + +err_utmi_p1_fck: + clk_put(omap->utmi_p1_fck); + +err_usbtll_ick: + clk_put(omap->usbtll_ick); + +err_usbtll_fck: + clk_put(omap->usbtll_fck); + +err_usbhost_fs_fck: + clk_put(omap->usbhost_fs_fck); + +err_usbhost_hs_fck: + clk_put(omap->usbhost_hs_fck); + +err_usbhost_ick: + clk_put(omap->usbhost_ick); + +err_end: + kfree(omap); + +end_probe: + return ret; +} + +/** + * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs + * @pdev: USB Host Controller being removed + * + * Reverses the effect of usbhs_omap_probe(). + */ +static int __devexit usbhs_omap_remove(struct platform_device *pdev) +{ + struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev); + + if (omap->count != 0) { + dev_err(&pdev->dev, + "Either EHCI or OHCI is still using usbhs core\n"); + return -EBUSY; + } + + iounmap(omap->tll_base); + iounmap(omap->uhh_base); + clk_put(omap->init_60m_fclk); + clk_put(omap->usbtll_p2_fck); + clk_put(omap->usbhost_p2_fck); + clk_put(omap->usbtll_p1_fck); + clk_put(omap->usbhost_p1_fck); + clk_put(omap->xclk60mhsp2_ck); + clk_put(omap->utmi_p2_fck); + clk_put(omap->xclk60mhsp1_ck); + clk_put(omap->utmi_p1_fck); + clk_put(omap->usbtll_ick); + clk_put(omap->usbtll_fck); + clk_put(omap->usbhost_fs_fck); + clk_put(omap->usbhost_hs_fck); + clk_put(omap->usbhost_ick); + kfree(omap); + + return 0; +} + +static bool is_ohci_port(enum usbhs_omap_port_mode pmode) +{ + switch (pmode) { + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: + case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: + return true; + + default: + return false; + } +} + +/* + * convert the port-mode enum to a value we can use in the FSLSMODE + * field of USBTLL_CHANNEL_CONF + */ +static unsigned ohci_omap3_fslsmode(enum usbhs_omap_port_mode mode) +{ + switch (mode) { + case OMAP_USBHS_PORT_MODE_UNUSED: + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: + return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0; + + case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: + return OMAP_TLL_FSLSMODE_6PIN_PHY_DP_DM; + + case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: + return OMAP_TLL_FSLSMODE_3PIN_PHY; + + case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: + return OMAP_TLL_FSLSMODE_4PIN_PHY; + + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: + return OMAP_TLL_FSLSMODE_6PIN_TLL_DAT_SE0; + + case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: + return OMAP_TLL_FSLSMODE_6PIN_TLL_DP_DM; + + case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: + return OMAP_TLL_FSLSMODE_3PIN_TLL; + + case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: + return OMAP_TLL_FSLSMODE_4PIN_TLL; + + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: + return OMAP_TLL_FSLSMODE_2PIN_TLL_DAT_SE0; + + case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: + return OMAP_TLL_FSLSMODE_2PIN_DAT_DP_DM; + default: + pr_warning("Invalid port mode, using default\n"); + return OMAP_TLL_FSLSMODE_6PIN_PHY_DAT_SE0; + } +} + +static void usbhs_omap_tll_init(struct device *dev, u8 tll_channel_count) +{ + struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); + struct usbhs_omap_platform_data *pdata = dev->platform_data; + unsigned reg; + int i; + + /* Program Common TLL register */ + reg = usbhs_read(omap->tll_base, OMAP_TLL_SHARED_CONF); + reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON + | OMAP_TLL_SHARED_CONF_USB_DIVRATION); + reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN; + reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN; + + usbhs_write(omap->tll_base, OMAP_TLL_SHARED_CONF, reg); + + /* Enable channels now */ + for (i = 0; i < tll_channel_count; i++) { + reg = usbhs_read(omap->tll_base, + OMAP_TLL_CHANNEL_CONF(i)); + + if (is_ohci_port(pdata->port_mode[i])) { + reg |= ohci_omap3_fslsmode(pdata->port_mode[i]) + << OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT; + reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS; + } else if (pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_TLL) { + + /* Disable AutoIdle, BitStuffing and use SDR Mode */ + reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE + | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF + | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE); + + reg |= (1 << (i + 1)); + } else + continue; + + reg |= OMAP_TLL_CHANNEL_CONF_CHANEN; + usbhs_write(omap->tll_base, + OMAP_TLL_CHANNEL_CONF(i), reg); + + usbhs_writeb(omap->tll_base, + OMAP_TLL_ULPI_SCRATCH_REGISTER(i), 0xbe); + } +} + +static int usbhs_enable(struct device *dev) +{ + struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); + struct usbhs_omap_platform_data *pdata = &omap->platdata; + unsigned long flags = 0; + int ret = 0; + unsigned long timeout; + unsigned reg; + + dev_dbg(dev, "starting TI HSUSB Controller\n"); + if (!pdata) { + dev_dbg(dev, "missing platform_data\n"); + ret = -ENODEV; + goto end_enable; + } + + spin_lock_irqsave(&omap->lock, flags); + if (omap->count > 0) + goto end_count; + + clk_enable(omap->usbhost_ick); + clk_enable(omap->usbhost_hs_fck); + clk_enable(omap->usbhost_fs_fck); + clk_enable(omap->usbtll_fck); + clk_enable(omap->usbtll_ick); + + if (pdata->ehci_data->phy_reset) { + if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) { + gpio_request(pdata->ehci_data->reset_gpio_port[0], + "USB1 PHY reset"); + gpio_direction_output + (pdata->ehci_data->reset_gpio_port[0], 1); + } + + if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) { + gpio_request(pdata->ehci_data->reset_gpio_port[1], + "USB2 PHY reset"); + gpio_direction_output + (pdata->ehci_data->reset_gpio_port[1], 1); + } + + /* Hold the PHY in RESET for enough time till DIR is high */ + udelay(10); + } + + omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION); + dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev); + + /* perform TLL soft reset, and wait until reset is complete */ + usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, + OMAP_USBTLL_SYSCONFIG_SOFTRESET); + + /* Wait for TLL reset to complete */ + timeout = jiffies + msecs_to_jiffies(1000); + while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS) + & OMAP_USBTLL_SYSSTATUS_RESETDONE)) { + cpu_relax(); + + if (time_after(jiffies, timeout)) { + dev_dbg(dev, "operation timed out\n"); + ret = -EINVAL; + goto err_tll; + } + } + + dev_dbg(dev, "TLL RESET DONE\n"); + + /* (1<<3) = no idle mode only for initial debugging */ + usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, + OMAP_USBTLL_SYSCONFIG_ENAWAKEUP | + OMAP_USBTLL_SYSCONFIG_SIDLEMODE | + OMAP_USBTLL_SYSCONFIG_AUTOIDLE); + + /* Put UHH in NoIdle/NoStandby mode */ + reg = usbhs_read(omap->uhh_base, OMAP_UHH_SYSCONFIG); + if (is_omap_usbhs_rev1(omap)) { + reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP + | OMAP_UHH_SYSCONFIG_SIDLEMODE + | OMAP_UHH_SYSCONFIG_CACTIVITY + | OMAP_UHH_SYSCONFIG_MIDLEMODE); + reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE; + + + } else if (is_omap_usbhs_rev2(omap)) { + reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR; + reg |= OMAP4_UHH_SYSCONFIG_NOIDLE; + reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR; + reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY; + } + + usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg); + + reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG); + /* setup ULPI bypass and burst configurations */ + reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN + | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN + | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN); + reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK; + reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN; + + if (is_omap_usbhs_rev1(omap)) { + if (pdata->port_mode[0] == OMAP_USBHS_PORT_MODE_UNUSED) + reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS; + if (pdata->port_mode[1] == OMAP_USBHS_PORT_MODE_UNUSED) + reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS; + if (pdata->port_mode[2] == OMAP_USBHS_PORT_MODE_UNUSED) + reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS; + + /* Bypass the TLL module for PHY mode operation */ + if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) { + dev_dbg(dev, "OMAP3 ES version <= ES2.1\n"); + if (is_ehci_phy_mode(pdata->port_mode[0]) || + is_ehci_phy_mode(pdata->port_mode[1]) || + is_ehci_phy_mode(pdata->port_mode[2])) + reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; + else + reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; + } else { + dev_dbg(dev, "OMAP3 ES version > ES2.1\n"); + if (is_ehci_phy_mode(pdata->port_mode[0])) + reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; + else + reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; + if (is_ehci_phy_mode(pdata->port_mode[1])) + reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; + else + reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; + if (is_ehci_phy_mode(pdata->port_mode[2])) + reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; + else + reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; + } + } else if (is_omap_usbhs_rev2(omap)) { + /* Clear port mode fields for PHY mode*/ + reg &= ~OMAP4_P1_MODE_CLEAR; + reg &= ~OMAP4_P2_MODE_CLEAR; + + if (is_ehci_phy_mode(pdata->port_mode[0])) { + ret = clk_set_parent(omap->utmi_p1_fck, + omap->xclk60mhsp1_ck); + if (ret != 0) { + dev_err(dev, "xclk60mhsp1_ck set parent" + "failed error:%d\n", ret); + goto err_tll; + } + } else if (is_ehci_tll_mode(pdata->port_mode[0])) { + ret = clk_set_parent(omap->utmi_p1_fck, + omap->init_60m_fclk); + if (ret != 0) { + dev_err(dev, "init_60m_fclk set parent" + "failed error:%d\n", ret); + goto err_tll; + } + clk_enable(omap->usbhost_p1_fck); + clk_enable(omap->usbtll_p1_fck); + } + + if (is_ehci_phy_mode(pdata->port_mode[1])) { + ret = clk_set_parent(omap->utmi_p2_fck, + omap->xclk60mhsp2_ck); + if (ret != 0) { + dev_err(dev, "xclk60mhsp1_ck set parent" + "failed error:%d\n", ret); + goto err_tll; + } + } else if (is_ehci_tll_mode(pdata->port_mode[1])) { + ret = clk_set_parent(omap->utmi_p2_fck, + omap->init_60m_fclk); + if (ret != 0) { + dev_err(dev, "init_60m_fclk set parent" + "failed error:%d\n", ret); + goto err_tll; + } + clk_enable(omap->usbhost_p2_fck); + clk_enable(omap->usbtll_p2_fck); + } + + clk_enable(omap->utmi_p1_fck); + clk_enable(omap->utmi_p2_fck); + + if (is_ehci_tll_mode(pdata->port_mode[0]) || + (is_ohci_port(pdata->port_mode[0]))) + reg |= OMAP4_P1_MODE_TLL; + else if (is_ehci_hsic_mode(pdata->port_mode[0])) + reg |= OMAP4_P1_MODE_HSIC; + + if (is_ehci_tll_mode(pdata->port_mode[1]) || + (is_ohci_port(pdata->port_mode[1]))) + reg |= OMAP4_P2_MODE_TLL; + else if (is_ehci_hsic_mode(pdata->port_mode[1])) + reg |= OMAP4_P2_MODE_HSIC; + } + + usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); + dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg); + + if (is_ehci_tll_mode(pdata->port_mode[0]) || + is_ehci_tll_mode(pdata->port_mode[1]) || + is_ehci_tll_mode(pdata->port_mode[2]) || + (is_ohci_port(pdata->port_mode[0])) || + (is_ohci_port(pdata->port_mode[1])) || + (is_ohci_port(pdata->port_mode[2]))) { + + /* Enable UTMI mode for required TLL channels */ + if (is_omap_usbhs_rev2(omap)) + usbhs_omap_tll_init(dev, OMAP_REV2_TLL_CHANNEL_COUNT); + else + usbhs_omap_tll_init(dev, OMAP_TLL_CHANNEL_COUNT); + } + + if (pdata->ehci_data->phy_reset) { + /* Hold the PHY in RESET for enough time till + * PHY is settled and ready + */ + udelay(10); + + if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) + gpio_set_value + (pdata->ehci_data->reset_gpio_port[0], 0); + + if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) + gpio_set_value + (pdata->ehci_data->reset_gpio_port[1], 0); + } + +end_count: + omap->count++; + goto end_enable; + +err_tll: + if (pdata->ehci_data->phy_reset) { + if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) + gpio_free(pdata->ehci_data->reset_gpio_port[0]); + + if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) + gpio_free(pdata->ehci_data->reset_gpio_port[1]); + } + + clk_disable(omap->usbtll_ick); + clk_disable(omap->usbtll_fck); + clk_disable(omap->usbhost_fs_fck); + clk_disable(omap->usbhost_hs_fck); + clk_disable(omap->usbhost_ick); + +end_enable: + spin_unlock_irqrestore(&omap->lock, flags); + return ret; +} + +static void usbhs_disable(struct device *dev) +{ + struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); + struct usbhs_omap_platform_data *pdata = &omap->platdata; + unsigned long flags = 0; + unsigned long timeout; + + dev_dbg(dev, "stopping TI HSUSB Controller\n"); + + spin_lock_irqsave(&omap->lock, flags); + + if (omap->count == 0) + goto end_disble; + + omap->count--; + + if (omap->count != 0) + goto end_disble; + + /* Reset OMAP modules for insmod/rmmod to work */ + usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG, + is_omap_usbhs_rev2(omap) ? + OMAP4_UHH_SYSCONFIG_SOFTRESET : + OMAP_UHH_SYSCONFIG_SOFTRESET); + + timeout = jiffies + msecs_to_jiffies(100); + while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS) + & (1 << 0))) { + cpu_relax(); + + if (time_after(jiffies, timeout)) + dev_dbg(dev, "operation timed out\n"); + } + + while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS) + & (1 << 1))) { + cpu_relax(); + + if (time_after(jiffies, timeout)) + dev_dbg(dev, "operation timed out\n"); + } + + while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS) + & (1 << 2))) { + cpu_relax(); + + if (time_after(jiffies, timeout)) + dev_dbg(dev, "operation timed out\n"); + } + + usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1)); + + while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS) + & (1 << 0))) { + cpu_relax(); + + if (time_after(jiffies, timeout)) + dev_dbg(dev, "operation timed out\n"); + } + + if (pdata->ehci_data->phy_reset) { + if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) + gpio_free(pdata->ehci_data->reset_gpio_port[0]); + + if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) + gpio_free(pdata->ehci_data->reset_gpio_port[1]); + } + + clk_disable(omap->utmi_p2_fck); + clk_disable(omap->utmi_p1_fck); + clk_disable(omap->usbtll_ick); + clk_disable(omap->usbtll_fck); + clk_disable(omap->usbhost_fs_fck); + clk_disable(omap->usbhost_hs_fck); + clk_disable(omap->usbhost_ick); + +end_disble: + spin_unlock_irqrestore(&omap->lock, flags); +} + +int omap_usbhs_enable(struct device *dev) +{ + return usbhs_enable(dev->parent); +} +EXPORT_SYMBOL_GPL(omap_usbhs_enable); + +void omap_usbhs_disable(struct device *dev) +{ + usbhs_disable(dev->parent); +} +EXPORT_SYMBOL_GPL(omap_usbhs_disable); + +static struct platform_driver usbhs_omap_driver = { + .driver = { + .name = (char *)usbhs_driver_name, + .owner = THIS_MODULE, + }, + .remove = __exit_p(usbhs_omap_remove), +}; + +MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>"); +MODULE_ALIAS("platform:" USBHS_DRIVER_NAME); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI"); + +static int __init omap_usbhs_drvinit(void) +{ + return platform_driver_probe(&usbhs_omap_driver, usbhs_omap_probe); +} + +/* + * init before ehci and ohci drivers; + * The usbhs core driver should be initialized much before + * the omap ehci and ohci probe functions are called. + */ +fs_initcall(omap_usbhs_drvinit); + +static void __exit omap_usbhs_drvexit(void) +{ + platform_driver_unregister(&usbhs_omap_driver); +} +module_exit(omap_usbhs_drvexit); diff --git a/drivers/staging/usbip/vhci_hcd.c b/drivers/staging/usbip/vhci_hcd.c index a35fe61268de..29ccc0150996 100644 --- a/drivers/staging/usbip/vhci_hcd.c +++ b/drivers/staging/usbip/vhci_hcd.c @@ -255,8 +255,8 @@ static inline void hub_descriptor(struct usb_hub_descriptor *desc) desc->wHubCharacteristics = (__force __u16) (__constant_cpu_to_le16(0x0001)); desc->bNbrPorts = VHCI_NPORTS; - desc->bitmap[0] = 0xff; - desc->bitmap[1] = 0xff; + desc->u.hs.DeviceRemovable[0] = 0xff; + desc->u.hs.DeviceRemovable[1] = 0xff; } static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c index 99ac70e32556..b268e9fccb47 100644 --- a/drivers/usb/atm/ueagle-atm.c +++ b/drivers/usb/atm/ueagle-atm.c @@ -168,7 +168,6 @@ struct uea_softc { union cmv_dsc cmv_dsc; struct work_struct task; - struct workqueue_struct *work_q; u16 pageno; u16 ovl; @@ -1879,7 +1878,7 @@ static int uea_start_reset(struct uea_softc *sc) /* start loading DSP */ sc->pageno = 0; sc->ovl = 0; - queue_work(sc->work_q, &sc->task); + schedule_work(&sc->task); /* wait for modem ready CMV */ ret = wait_cmv_ack(sc); @@ -2091,14 +2090,14 @@ static void uea_schedule_load_page_e1(struct uea_softc *sc, { sc->pageno = intr->e1_bSwapPageNo; sc->ovl = intr->e1_bOvl >> 4 | intr->e1_bOvl << 4; - queue_work(sc->work_q, &sc->task); + schedule_work(&sc->task); } static void uea_schedule_load_page_e4(struct uea_softc *sc, struct intr_pkt *intr) { sc->pageno = intr->e4_bSwapPageNo; - queue_work(sc->work_q, &sc->task); + schedule_work(&sc->task); } /* @@ -2170,13 +2169,6 @@ static int uea_boot(struct uea_softc *sc) init_waitqueue_head(&sc->sync_q); - sc->work_q = create_workqueue("ueagle-dsp"); - if (!sc->work_q) { - uea_err(INS_TO_USBDEV(sc), "cannot allocate workqueue\n"); - uea_leaves(INS_TO_USBDEV(sc)); - return -ENOMEM; - } - if (UEA_CHIP_VERSION(sc) == ADI930) load_XILINX_firmware(sc); @@ -2225,7 +2217,6 @@ err1: sc->urb_int = NULL; kfree(intr); err0: - destroy_workqueue(sc->work_q); uea_leaves(INS_TO_USBDEV(sc)); return -ENOMEM; } @@ -2246,8 +2237,8 @@ static void uea_stop(struct uea_softc *sc) kfree(sc->urb_int->transfer_buffer); usb_free_urb(sc->urb_int); - /* stop any pending boot process, when no one can schedule work */ - destroy_workqueue(sc->work_q); + /* flush the work item, when no one can schedule it */ + flush_work_sync(&sc->task); if (sc->dsp_firm) release_firmware(sc->dsp_firm); diff --git a/drivers/usb/core/buffer.c b/drivers/usb/core/buffer.c index 2c6965484fe8..b0585e623ba9 100644 --- a/drivers/usb/core/buffer.c +++ b/drivers/usb/core/buffer.c @@ -10,7 +10,7 @@ #include <linux/slab.h> #include <linux/device.h> #include <linux/mm.h> -#include <asm/io.h> +#include <linux/io.h> #include <linux/dma-mapping.h> #include <linux/dmapool.h> #include <linux/usb.h> @@ -22,7 +22,7 @@ */ /* FIXME tune these based on pool statistics ... */ -static const size_t pool_max [HCD_BUFFER_POOLS] = { +static const size_t pool_max[HCD_BUFFER_POOLS] = { /* platforms without dma-friendly caches might need to * prevent cacheline sharing... */ @@ -51,7 +51,7 @@ static const size_t pool_max [HCD_BUFFER_POOLS] = { int hcd_buffer_create(struct usb_hcd *hcd) { char name[16]; - int i, size; + int i, size; if (!hcd->self.controller->dma_mask && !(hcd->driver->flags & HCD_LOCAL_MEM)) @@ -64,7 +64,7 @@ int hcd_buffer_create(struct usb_hcd *hcd) snprintf(name, sizeof name, "buffer-%d", size); hcd->pool[i] = dma_pool_create(name, hcd->self.controller, size, size, 0); - if (!hcd->pool [i]) { + if (!hcd->pool[i]) { hcd_buffer_destroy(hcd); return -ENOMEM; } @@ -99,14 +99,14 @@ void hcd_buffer_destroy(struct usb_hcd *hcd) */ void *hcd_buffer_alloc( - struct usb_bus *bus, + struct usb_bus *bus, size_t size, gfp_t mem_flags, dma_addr_t *dma ) { struct usb_hcd *hcd = bus_to_hcd(bus); - int i; + int i; /* some USB hosts just use PIO */ if (!bus->controller->dma_mask && @@ -116,21 +116,21 @@ void *hcd_buffer_alloc( } for (i = 0; i < HCD_BUFFER_POOLS; i++) { - if (size <= pool_max [i]) - return dma_pool_alloc(hcd->pool [i], mem_flags, dma); + if (size <= pool_max[i]) + return dma_pool_alloc(hcd->pool[i], mem_flags, dma); } return dma_alloc_coherent(hcd->self.controller, size, dma, mem_flags); } void hcd_buffer_free( - struct usb_bus *bus, + struct usb_bus *bus, size_t size, - void *addr, + void *addr, dma_addr_t dma ) { struct usb_hcd *hcd = bus_to_hcd(bus); - int i; + int i; if (!addr) return; @@ -142,8 +142,8 @@ void hcd_buffer_free( } for (i = 0; i < HCD_BUFFER_POOLS; i++) { - if (size <= pool_max [i]) { - dma_pool_free(hcd->pool [i], addr, dma); + if (size <= pool_max[i]) { + dma_pool_free(hcd->pool[i], addr, dma); return; } } diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index fca61720b873..38072e4e74bd 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1659,6 +1659,11 @@ static int usb_runtime_suspend(struct device *dev) return -EAGAIN; status = usb_suspend_both(udev, PMSG_AUTO_SUSPEND); + /* The PM core reacts badly unless the return code is 0, + * -EAGAIN, or -EBUSY, so always return -EBUSY on an error. + */ + if (status != 0) + return -EBUSY; return status; } diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 64a035ba2eab..ce22f4a84ed0 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -192,13 +192,13 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) "Found HC with no IRQ. Check BIOS/PCI %s setup!\n", pci_name(dev)); retval = -ENODEV; - goto err1; + goto disable_pci; } hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev)); if (!hcd) { retval = -ENOMEM; - goto err1; + goto disable_pci; } if (driver->flags & HCD_MEMORY) { @@ -209,13 +209,13 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) driver->description)) { dev_dbg(&dev->dev, "controller already in use\n"); retval = -EBUSY; - goto err2; + goto clear_companion; } hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); if (hcd->regs == NULL) { dev_dbg(&dev->dev, "error mapping memory\n"); retval = -EFAULT; - goto err3; + goto release_mem_region; } } else { @@ -236,7 +236,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) if (region == PCI_ROM_RESOURCE) { dev_dbg(&dev->dev, "no i/o regions available\n"); retval = -EBUSY; - goto err2; + goto clear_companion; } } @@ -244,24 +244,24 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED); if (retval != 0) - goto err4; + goto unmap_registers; set_hs_companion(dev, hcd); if (pci_dev_run_wake(dev)) pm_runtime_put_noidle(&dev->dev); return retval; - err4: +unmap_registers: if (driver->flags & HCD_MEMORY) { iounmap(hcd->regs); - err3: +release_mem_region: release_mem_region(hcd->rsrc_start, hcd->rsrc_len); } else release_region(hcd->rsrc_start, hcd->rsrc_len); - err2: +clear_companion: clear_hs_companion(dev, hcd); usb_put_hcd(hcd); - err1: +disable_pci: pci_disable_device(dev); dev_err(&dev->dev, "init %s fail, %d\n", pci_name(dev), retval); return retval; @@ -363,11 +363,17 @@ static int check_root_hub_suspended(struct device *dev) struct pci_dev *pci_dev = to_pci_dev(dev); struct usb_hcd *hcd = pci_get_drvdata(pci_dev); - if (!(hcd->state == HC_STATE_SUSPENDED || - hcd->state == HC_STATE_HALT)) { + if (HCD_RH_RUNNING(hcd)) { dev_warn(dev, "Root hub is not suspended\n"); return -EBUSY; } + if (hcd->shared_hcd) { + hcd = hcd->shared_hcd; + if (HCD_RH_RUNNING(hcd)) { + dev_warn(dev, "Secondary root hub is not suspended\n"); + return -EBUSY; + } + } return 0; } @@ -386,17 +392,22 @@ static int suspend_common(struct device *dev, bool do_wakeup) if (retval) return retval; - if (hcd->driver->pci_suspend) { + if (hcd->driver->pci_suspend && !HCD_DEAD(hcd)) { /* Optimization: Don't suspend if a root-hub wakeup is * pending and it would cause the HCD to wake up anyway. */ if (do_wakeup && HCD_WAKEUP_PENDING(hcd)) return -EBUSY; + if (do_wakeup && hcd->shared_hcd && + HCD_WAKEUP_PENDING(hcd->shared_hcd)) + return -EBUSY; retval = hcd->driver->pci_suspend(hcd, do_wakeup); suspend_report_result(hcd->driver->pci_suspend, retval); /* Check again in case wakeup raced with pci_suspend */ - if (retval == 0 && do_wakeup && HCD_WAKEUP_PENDING(hcd)) { + if ((retval == 0 && do_wakeup && HCD_WAKEUP_PENDING(hcd)) || + (retval == 0 && do_wakeup && hcd->shared_hcd && + HCD_WAKEUP_PENDING(hcd->shared_hcd))) { if (hcd->driver->pci_resume) hcd->driver->pci_resume(hcd, false); retval = -EBUSY; @@ -427,7 +438,9 @@ static int resume_common(struct device *dev, int event) struct usb_hcd *hcd = pci_get_drvdata(pci_dev); int retval; - if (hcd->state != HC_STATE_SUSPENDED) { + if (HCD_RH_RUNNING(hcd) || + (hcd->shared_hcd && + HCD_RH_RUNNING(hcd->shared_hcd))) { dev_dbg(dev, "can't resume, not suspended!\n"); return 0; } @@ -441,8 +454,10 @@ static int resume_common(struct device *dev, int event) pci_set_master(pci_dev); clear_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); + if (hcd->shared_hcd) + clear_bit(HCD_FLAG_SAW_IRQ, &hcd->shared_hcd->flags); - if (hcd->driver->pci_resume) { + if (hcd->driver->pci_resume && !HCD_DEAD(hcd)) { if (event != PM_EVENT_AUTO_RESUME) wait_for_companions(pci_dev, hcd); @@ -450,6 +465,8 @@ static int resume_common(struct device *dev, int event) event == PM_EVENT_RESTORE); if (retval) { dev_err(dev, "PCI post-resume error %d!\n", retval); + if (hcd->shared_hcd) + usb_hc_died(hcd->shared_hcd); usb_hc_died(hcd); } } @@ -475,10 +492,11 @@ static int hcd_pci_suspend_noirq(struct device *dev) pci_save_state(pci_dev); - /* If the root hub is HALTed rather than SUSPENDed, - * disallow remote wakeup. + /* If the root hub is dead rather than suspended, disallow remote + * wakeup. usb_hc_died() should ensure that both hosts are marked as + * dying, so we only need to check the primary roothub. */ - if (hcd->state == HC_STATE_HALT) + if (HCD_DEAD(hcd)) device_set_wakeup_enable(dev, 0); dev_dbg(dev, "wakeup: %d\n", device_may_wakeup(dev)); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index e935f71d7a34..02b4dbfa488a 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -297,7 +297,7 @@ static const u8 ss_rh_config_descriptor[] = { /* one configuration */ 0x09, /* __u8 bLength; */ 0x02, /* __u8 bDescriptorType; Configuration */ - 0x19, 0x00, /* __le16 wTotalLength; FIXME */ + 0x1f, 0x00, /* __le16 wTotalLength; */ 0x01, /* __u8 bNumInterfaces; (1) */ 0x01, /* __u8 bConfigurationValue; */ 0x00, /* __u8 iConfiguration; */ @@ -327,11 +327,14 @@ static const u8 ss_rh_config_descriptor[] = { /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) * see hub.c:hub_configure() for details. */ (USB_MAXCHILDREN + 1 + 7) / 8, 0x00, - 0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */ - /* - * All 3.0 hubs should have an endpoint companion descriptor, - * but we're ignoring that for now. FIXME? - */ + 0x0c, /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */ + + /* one SuperSpeed endpoint companion descriptor */ + 0x06, /* __u8 ss_bLength */ + 0x30, /* __u8 ss_bDescriptorType; SuperSpeed EP Companion */ + 0x00, /* __u8 ss_bMaxBurst; allows 1 TX between ACKs */ + 0x00, /* __u8 ss_bmAttributes; 1 packet per service interval */ + 0x02, 0x00 /* __le16 ss_wBytesPerInterval; 15 bits for max 15 ports */ }; /*-------------------------------------------------------------------------*/ @@ -504,7 +507,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) case DeviceRequest | USB_REQ_GET_DESCRIPTOR: switch (wValue & 0xff00) { case USB_DT_DEVICE << 8: - switch (hcd->driver->flags & HCD_MASK) { + switch (hcd->speed) { case HCD_USB3: bufp = usb3_rh_dev_descriptor; break; @@ -522,7 +525,7 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) patch_protocol = 1; break; case USB_DT_CONFIG << 8: - switch (hcd->driver->flags & HCD_MASK) { + switch (hcd->speed) { case HCD_USB3: bufp = ss_rh_config_descriptor; len = sizeof ss_rh_config_descriptor; @@ -983,7 +986,7 @@ static int register_root_hub(struct usb_hcd *hcd) spin_unlock_irq (&hcd_root_hub_lock); /* Did the HC die before the root hub was registered? */ - if (hcd->state == HC_STATE_HALT) + if (HCD_DEAD(hcd) || hcd->state == HC_STATE_HALT) usb_hc_died (hcd); /* This time clean up */ } @@ -1089,13 +1092,10 @@ int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb) * Check the host controller's state and add the URB to the * endpoint's queue. */ - switch (hcd->state) { - case HC_STATE_RUNNING: - case HC_STATE_RESUMING: + if (HCD_RH_RUNNING(hcd)) { urb->unlinked = 0; list_add_tail(&urb->urb_list, &urb->ep->urb_list); - break; - default: + } else { rc = -ESHUTDOWN; goto done; } @@ -1153,6 +1153,8 @@ int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb, dev_warn(hcd->self.controller, "Unlink after no-IRQ? " "Controller is probably using the wrong IRQ.\n"); set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); + if (hcd->shared_hcd) + set_bit(HCD_FLAG_SAW_IRQ, &hcd->shared_hcd->flags); } return 0; @@ -1262,7 +1264,7 @@ static void hcd_free_coherent(struct usb_bus *bus, dma_addr_t *dma_handle, *dma_handle = 0; } -void unmap_urb_setup_for_dma(struct usb_hcd *hcd, struct urb *urb) +void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *hcd, struct urb *urb) { if (urb->transfer_flags & URB_SETUP_MAP_SINGLE) dma_unmap_single(hcd->self.controller, @@ -1279,13 +1281,21 @@ void unmap_urb_setup_for_dma(struct usb_hcd *hcd, struct urb *urb) /* Make it safe to call this routine more than once */ urb->transfer_flags &= ~(URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL); } -EXPORT_SYMBOL_GPL(unmap_urb_setup_for_dma); +EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_setup_for_dma); -void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) +static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) +{ + if (hcd->driver->unmap_urb_for_dma) + hcd->driver->unmap_urb_for_dma(hcd, urb); + else + usb_hcd_unmap_urb_for_dma(hcd, urb); +} + +void usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) { enum dma_data_direction dir; - unmap_urb_setup_for_dma(hcd, urb); + usb_hcd_unmap_urb_setup_for_dma(hcd, urb); dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; if (urb->transfer_flags & URB_DMA_MAP_SG) @@ -1314,11 +1324,20 @@ void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) urb->transfer_flags &= ~(URB_DMA_MAP_SG | URB_DMA_MAP_PAGE | URB_DMA_MAP_SINGLE | URB_MAP_LOCAL); } -EXPORT_SYMBOL_GPL(unmap_urb_for_dma); +EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_for_dma); static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) { + if (hcd->driver->map_urb_for_dma) + return hcd->driver->map_urb_for_dma(hcd, urb, mem_flags); + else + return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags); +} + +int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, + gfp_t mem_flags) +{ enum dma_data_direction dir; int ret = 0; @@ -1410,10 +1429,11 @@ static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, } if (ret && (urb->transfer_flags & (URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL))) - unmap_urb_for_dma(hcd, urb); + usb_hcd_unmap_urb_for_dma(hcd, urb); } return ret; } +EXPORT_SYMBOL_GPL(usb_hcd_map_urb_for_dma); /*-------------------------------------------------------------------------*/ @@ -1913,7 +1933,7 @@ int usb_hcd_get_frame_number (struct usb_device *udev) { struct usb_hcd *hcd = bus_to_hcd(udev->bus); - if (!HC_IS_RUNNING (hcd->state)) + if (!HCD_RH_RUNNING(hcd)) return -ESHUTDOWN; return hcd->driver->get_frame_number (hcd); } @@ -1930,9 +1950,15 @@ int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg) dev_dbg(&rhdev->dev, "bus %s%s\n", (msg.event & PM_EVENT_AUTO ? "auto-" : ""), "suspend"); + if (HCD_DEAD(hcd)) { + dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "suspend"); + return 0; + } + if (!hcd->driver->bus_suspend) { status = -ENOENT; } else { + clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags); hcd->state = HC_STATE_QUIESCING; status = hcd->driver->bus_suspend(hcd); } @@ -1940,7 +1966,12 @@ int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg) usb_set_device_state(rhdev, USB_STATE_SUSPENDED); hcd->state = HC_STATE_SUSPENDED; } else { - hcd->state = old_state; + spin_lock_irq(&hcd_root_hub_lock); + if (!HCD_DEAD(hcd)) { + set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags); + hcd->state = old_state; + } + spin_unlock_irq(&hcd_root_hub_lock); dev_dbg(&rhdev->dev, "bus %s fail, err %d\n", "suspend", status); } @@ -1955,9 +1986,13 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg) dev_dbg(&rhdev->dev, "usb %s%s\n", (msg.event & PM_EVENT_AUTO ? "auto-" : ""), "resume"); + if (HCD_DEAD(hcd)) { + dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "resume"); + return 0; + } if (!hcd->driver->bus_resume) return -ENOENT; - if (hcd->state == HC_STATE_RUNNING) + if (HCD_RH_RUNNING(hcd)) return 0; hcd->state = HC_STATE_RESUMING; @@ -1966,10 +2001,15 @@ int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg) if (status == 0) { /* TRSMRCY = 10 msec */ msleep(10); - usb_set_device_state(rhdev, rhdev->actconfig - ? USB_STATE_CONFIGURED - : USB_STATE_ADDRESS); - hcd->state = HC_STATE_RUNNING; + spin_lock_irq(&hcd_root_hub_lock); + if (!HCD_DEAD(hcd)) { + usb_set_device_state(rhdev, rhdev->actconfig + ? USB_STATE_CONFIGURED + : USB_STATE_ADDRESS); + set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags); + hcd->state = HC_STATE_RUNNING; + } + spin_unlock_irq(&hcd_root_hub_lock); } else { hcd->state = old_state; dev_dbg(&rhdev->dev, "bus %s fail, err %d\n", @@ -2080,12 +2120,14 @@ irqreturn_t usb_hcd_irq (int irq, void *__hcd) */ local_irq_save(flags); - if (unlikely(hcd->state == HC_STATE_HALT || !HCD_HW_ACCESSIBLE(hcd))) { + if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd))) { rc = IRQ_NONE; } else if (hcd->driver->irq(hcd) == IRQ_NONE) { rc = IRQ_NONE; } else { set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); + if (hcd->shared_hcd) + set_bit(HCD_FLAG_SAW_IRQ, &hcd->shared_hcd->flags); if (unlikely(hcd->state == HC_STATE_HALT)) usb_hc_died(hcd); @@ -2105,7 +2147,9 @@ EXPORT_SYMBOL_GPL(usb_hcd_irq); * * This is called by bus glue to report a USB host controller that died * while operations may still have been pending. It's called automatically - * by the PCI glue, so only glue for non-PCI busses should need to call it. + * by the PCI glue, so only glue for non-PCI busses should need to call it. + * + * Only call this function with the primary HCD. */ void usb_hc_died (struct usb_hcd *hcd) { @@ -2114,6 +2158,8 @@ void usb_hc_died (struct usb_hcd *hcd) dev_err (hcd->self.controller, "HC died; cleaning up\n"); spin_lock_irqsave (&hcd_root_hub_lock, flags); + clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags); + set_bit(HCD_FLAG_DEAD, &hcd->flags); if (hcd->rh_registered) { clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); @@ -2122,17 +2168,31 @@ void usb_hc_died (struct usb_hcd *hcd) USB_STATE_NOTATTACHED); usb_kick_khubd (hcd->self.root_hub); } + if (usb_hcd_is_primary_hcd(hcd) && hcd->shared_hcd) { + hcd = hcd->shared_hcd; + if (hcd->rh_registered) { + clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); + + /* make khubd clean up old urbs and devices */ + usb_set_device_state(hcd->self.root_hub, + USB_STATE_NOTATTACHED); + usb_kick_khubd(hcd->self.root_hub); + } + } spin_unlock_irqrestore (&hcd_root_hub_lock, flags); + /* Make sure that the other roothub is also deallocated. */ } EXPORT_SYMBOL_GPL (usb_hc_died); /*-------------------------------------------------------------------------*/ /** - * usb_create_hcd - create and initialize an HCD structure + * usb_create_shared_hcd - create and initialize an HCD structure * @driver: HC driver that will use this hcd * @dev: device for this HC, stored in hcd->self.controller * @bus_name: value to store in hcd->self.bus_name + * @primary_hcd: a pointer to the usb_hcd structure that is sharing the + * PCI device. Only allocate certain resources for the primary HCD * Context: !in_interrupt() * * Allocate a struct usb_hcd, with extra space at the end for the @@ -2141,8 +2201,9 @@ EXPORT_SYMBOL_GPL (usb_hc_died); * * If memory is unavailable, returns NULL. */ -struct usb_hcd *usb_create_hcd (const struct hc_driver *driver, - struct device *dev, const char *bus_name) +struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver, + struct device *dev, const char *bus_name, + struct usb_hcd *primary_hcd) { struct usb_hcd *hcd; @@ -2151,7 +2212,24 @@ struct usb_hcd *usb_create_hcd (const struct hc_driver *driver, dev_dbg (dev, "hcd alloc failed\n"); return NULL; } - dev_set_drvdata(dev, hcd); + if (primary_hcd == NULL) { + hcd->bandwidth_mutex = kmalloc(sizeof(*hcd->bandwidth_mutex), + GFP_KERNEL); + if (!hcd->bandwidth_mutex) { + kfree(hcd); + dev_dbg(dev, "hcd bandwidth mutex alloc failed\n"); + return NULL; + } + mutex_init(hcd->bandwidth_mutex); + dev_set_drvdata(dev, hcd); + } else { + hcd->bandwidth_mutex = primary_hcd->bandwidth_mutex; + hcd->primary_hcd = primary_hcd; + primary_hcd->primary_hcd = primary_hcd; + hcd->shared_hcd = primary_hcd; + primary_hcd->shared_hcd = hcd; + } + kref_init(&hcd->kref); usb_bus_init(&hcd->self); @@ -2165,19 +2243,53 @@ struct usb_hcd *usb_create_hcd (const struct hc_driver *driver, #ifdef CONFIG_USB_SUSPEND INIT_WORK(&hcd->wakeup_work, hcd_resume_work); #endif - mutex_init(&hcd->bandwidth_mutex); hcd->driver = driver; + hcd->speed = driver->flags & HCD_MASK; hcd->product_desc = (driver->product_desc) ? driver->product_desc : "USB Host Controller"; return hcd; } +EXPORT_SYMBOL_GPL(usb_create_shared_hcd); + +/** + * usb_create_hcd - create and initialize an HCD structure + * @driver: HC driver that will use this hcd + * @dev: device for this HC, stored in hcd->self.controller + * @bus_name: value to store in hcd->self.bus_name + * Context: !in_interrupt() + * + * Allocate a struct usb_hcd, with extra space at the end for the + * HC driver's private data. Initialize the generic members of the + * hcd structure. + * + * If memory is unavailable, returns NULL. + */ +struct usb_hcd *usb_create_hcd(const struct hc_driver *driver, + struct device *dev, const char *bus_name) +{ + return usb_create_shared_hcd(driver, dev, bus_name, NULL); +} EXPORT_SYMBOL_GPL(usb_create_hcd); +/* + * Roothubs that share one PCI device must also share the bandwidth mutex. + * Don't deallocate the bandwidth_mutex until the last shared usb_hcd is + * deallocated. + * + * Make sure to only deallocate the bandwidth_mutex when the primary HCD is + * freed. When hcd_release() is called for the non-primary HCD, set the + * primary_hcd's shared_hcd pointer to null (since the non-primary HCD will be + * freed shortly). + */ static void hcd_release (struct kref *kref) { struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref); + if (usb_hcd_is_primary_hcd(hcd)) + kfree(hcd->bandwidth_mutex); + else + hcd->shared_hcd->shared_hcd = NULL; kfree(hcd); } @@ -2196,6 +2308,54 @@ void usb_put_hcd (struct usb_hcd *hcd) } EXPORT_SYMBOL_GPL(usb_put_hcd); +int usb_hcd_is_primary_hcd(struct usb_hcd *hcd) +{ + if (!hcd->primary_hcd) + return 1; + return hcd == hcd->primary_hcd; +} +EXPORT_SYMBOL_GPL(usb_hcd_is_primary_hcd); + +static int usb_hcd_request_irqs(struct usb_hcd *hcd, + unsigned int irqnum, unsigned long irqflags) +{ + int retval; + + if (hcd->driver->irq) { + + /* IRQF_DISABLED doesn't work as advertised when used together + * with IRQF_SHARED. As usb_hcd_irq() will always disable + * interrupts we can remove it here. + */ + if (irqflags & IRQF_SHARED) + irqflags &= ~IRQF_DISABLED; + + snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d", + hcd->driver->description, hcd->self.busnum); + retval = request_irq(irqnum, &usb_hcd_irq, irqflags, + hcd->irq_descr, hcd); + if (retval != 0) { + dev_err(hcd->self.controller, + "request interrupt %d failed\n", + irqnum); + return retval; + } + hcd->irq = irqnum; + dev_info(hcd->self.controller, "irq %d, %s 0x%08llx\n", irqnum, + (hcd->driver->flags & HCD_MEMORY) ? + "io mem" : "io base", + (unsigned long long)hcd->rsrc_start); + } else { + hcd->irq = -1; + if (hcd->rsrc_start) + dev_info(hcd->self.controller, "%s 0x%08llx\n", + (hcd->driver->flags & HCD_MEMORY) ? + "io mem" : "io base", + (unsigned long long)hcd->rsrc_start); + } + return 0; +} + /** * usb_add_hcd - finish generic HCD structure initialization and register * @hcd: the usb_hcd structure to initialize @@ -2236,7 +2396,7 @@ int usb_add_hcd(struct usb_hcd *hcd, } hcd->self.root_hub = rhdev; - switch (hcd->driver->flags & HCD_MASK) { + switch (hcd->speed) { case HCD_USB11: rhdev->speed = USB_SPEED_FULL; break; @@ -2256,6 +2416,12 @@ int usb_add_hcd(struct usb_hcd *hcd, */ device_init_wakeup(&rhdev->dev, 1); + /* HCD_FLAG_RH_RUNNING doesn't matter until the root hub is + * registered. But since the controller can die at any time, + * let's initialize the flag before touching the hardware. + */ + set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags); + /* "reset" is misnamed; its role is now one-time init. the controller * should already have been reset (and boot firmware kicked off etc). */ @@ -2271,38 +2437,15 @@ int usb_add_hcd(struct usb_hcd *hcd, dev_dbg(hcd->self.controller, "supports USB remote wakeup\n"); /* enable irqs just before we start the controller */ - if (hcd->driver->irq) { - - /* IRQF_DISABLED doesn't work as advertised when used together - * with IRQF_SHARED. As usb_hcd_irq() will always disable - * interrupts we can remove it here. - */ - if (irqflags & IRQF_SHARED) - irqflags &= ~IRQF_DISABLED; - - snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d", - hcd->driver->description, hcd->self.busnum); - if ((retval = request_irq(irqnum, &usb_hcd_irq, irqflags, - hcd->irq_descr, hcd)) != 0) { - dev_err(hcd->self.controller, - "request interrupt %d failed\n", irqnum); + if (usb_hcd_is_primary_hcd(hcd)) { + retval = usb_hcd_request_irqs(hcd, irqnum, irqflags); + if (retval) goto err_request_irq; - } - hcd->irq = irqnum; - dev_info(hcd->self.controller, "irq %d, %s 0x%08llx\n", irqnum, - (hcd->driver->flags & HCD_MEMORY) ? - "io mem" : "io base", - (unsigned long long)hcd->rsrc_start); - } else { - hcd->irq = -1; - if (hcd->rsrc_start) - dev_info(hcd->self.controller, "%s 0x%08llx\n", - (hcd->driver->flags & HCD_MEMORY) ? - "io mem" : "io base", - (unsigned long long)hcd->rsrc_start); } - if ((retval = hcd->driver->start(hcd)) < 0) { + hcd->state = HC_STATE_RUNNING; + retval = hcd->driver->start(hcd); + if (retval < 0) { dev_err(hcd->self.controller, "startup error %d\n", retval); goto err_hcd_driver_start; } @@ -2323,6 +2466,7 @@ int usb_add_hcd(struct usb_hcd *hcd, return retval; error_create_attr_group: + clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags); if (HC_IS_RUNNING(hcd->state)) hcd->state = HC_STATE_QUIESCING; spin_lock_irq(&hcd_root_hub_lock); @@ -2344,7 +2488,7 @@ err_register_root_hub: clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); del_timer_sync(&hcd->rh_timer); err_hcd_driver_start: - if (hcd->irq >= 0) + if (usb_hcd_is_primary_hcd(hcd) && hcd->irq >= 0) free_irq(irqnum, hcd); err_request_irq: err_hcd_driver_setup: @@ -2375,6 +2519,7 @@ void usb_remove_hcd(struct usb_hcd *hcd) usb_get_dev(rhdev); sysfs_remove_group(&rhdev->dev.kobj, &usb_bus_attr_group); + clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags); if (HC_IS_RUNNING (hcd->state)) hcd->state = HC_STATE_QUIESCING; @@ -2407,8 +2552,10 @@ void usb_remove_hcd(struct usb_hcd *hcd) clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); del_timer_sync(&hcd->rh_timer); - if (hcd->irq >= 0) - free_irq(hcd->irq, hcd); + if (usb_hcd_is_primary_hcd(hcd)) { + if (hcd->irq >= 0) + free_irq(hcd->irq, hcd); + } usb_put_dev(hcd->self.root_hub); usb_deregister_bus(&hcd->self); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 19d3435e6140..564eaa5525d7 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -82,6 +82,10 @@ struct usb_hub { void **port_owners; }; +static inline int hub_is_superspeed(struct usb_device *hdev) +{ + return (hdev->descriptor.bDeviceProtocol == 3); +} /* Protect struct usb_device->state and ->children members * Note: Both are also protected by ->dev.sem, except that ->state can @@ -151,14 +155,14 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem); static int usb_reset_and_verify_device(struct usb_device *udev); -static inline char *portspeed(int portstatus) +static inline char *portspeed(struct usb_hub *hub, int portstatus) { + if (hub_is_superspeed(hub->hdev)) + return "5.0 Gb/s"; if (portstatus & USB_PORT_STAT_HIGH_SPEED) return "480 Mb/s"; else if (portstatus & USB_PORT_STAT_LOW_SPEED) return "1.5 Mb/s"; - else if (portstatus & USB_PORT_STAT_SUPER_SPEED) - return "5.0 Gb/s"; else return "12 Mb/s"; } @@ -172,14 +176,23 @@ static struct usb_hub *hdev_to_hub(struct usb_device *hdev) } /* USB 2.0 spec Section 11.24.4.5 */ -static int get_hub_descriptor(struct usb_device *hdev, void *data, int size) +static int get_hub_descriptor(struct usb_device *hdev, void *data) { - int i, ret; + int i, ret, size; + unsigned dtype; + + if (hub_is_superspeed(hdev)) { + dtype = USB_DT_SS_HUB; + size = USB_DT_SS_HUB_SIZE; + } else { + dtype = USB_DT_HUB; + size = sizeof(struct usb_hub_descriptor); + } for (i = 0; i < 3; i++) { ret = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0), USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB, - USB_DT_HUB << 8, 0, data, size, + dtype << 8, 0, data, size, USB_CTRL_GET_TIMEOUT); if (ret >= (USB_DT_HUB_NONVAR_SIZE + 2)) return ret; @@ -365,6 +378,16 @@ static int hub_port_status(struct usb_hub *hub, int port1, } else { *status = le16_to_cpu(hub->status->port.wPortStatus); *change = le16_to_cpu(hub->status->port.wPortChange); + + if ((hub->hdev->parent != NULL) && + hub_is_superspeed(hub->hdev)) { + /* Translate the USB 3 port status */ + u16 tmp = *status & USB_SS_PORT_STAT_MASK; + if (*status & USB_SS_PORT_STAT_POWER) + tmp |= USB_PORT_STAT_POWER; + *status = tmp; + } + ret = 0; } mutex_unlock(&hub->status_mutex); @@ -607,7 +630,7 @@ static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) if (hdev->children[port1-1] && set_state) usb_set_device_state(hdev->children[port1-1], USB_STATE_NOTATTACHED); - if (!hub->error) + if (!hub->error && !hub_is_superspeed(hub->hdev)) ret = clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE); if (ret) dev_err(hub->intfdev, "cannot disable port %d (err = %d)\n", @@ -616,7 +639,7 @@ static int hub_port_disable(struct usb_hub *hub, int port1, int set_state) } /* - * Disable a port and mark a logical connnect-change event, so that some + * Disable a port and mark a logical connect-change event, so that some * time later khubd will disconnect() any existing usb_device on the port * and will re-enumerate if there actually is a device attached. */ @@ -769,12 +792,8 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) * USB3 protocol ports will automatically transition * to Enabled state when detect an USB3.0 device attach. * Do not disable USB3 protocol ports. - * FIXME: USB3 root hub and external hubs are treated - * differently here. */ - if (hdev->descriptor.bDeviceProtocol != 3 || - (!hdev->parent && - !(portstatus & USB_PORT_STAT_SUPER_SPEED))) { + if (!hub_is_superspeed(hdev)) { clear_port_feature(hdev, port1, USB_PORT_FEAT_ENABLE); portstatus &= ~USB_PORT_STAT_ENABLE; @@ -795,6 +814,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_ENABLE); } + if (portchange & USB_PORT_STAT_C_LINK_STATE) { + need_debounce_delay = true; + clear_port_feature(hub->hdev, port1, + USB_PORT_FEAT_C_PORT_LINK_STATE); + } /* We can forget about a "removed" device when there's a * physical disconnect or the connect status changes. @@ -964,12 +988,23 @@ static int hub_configure(struct usb_hub *hub, goto fail; } + if (hub_is_superspeed(hdev) && (hdev->parent != NULL)) { + ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), + HUB_SET_DEPTH, USB_RT_HUB, + hdev->level - 1, 0, NULL, 0, + USB_CTRL_SET_TIMEOUT); + + if (ret < 0) { + message = "can't set hub depth"; + goto fail; + } + } + /* Request the entire hub descriptor. * hub->descriptor can handle USB_MAXCHILDREN ports, * but the hub can/will return fewer bytes here. */ - ret = get_hub_descriptor(hdev, hub->descriptor, - sizeof(*hub->descriptor)); + ret = get_hub_descriptor(hdev, hub->descriptor); if (ret < 0) { message = "can't read hub descriptor"; goto fail; @@ -991,12 +1026,14 @@ static int hub_configure(struct usb_hub *hub, wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics); - if (wHubCharacteristics & HUB_CHAR_COMPOUND) { + /* FIXME for USB 3.0, skip for now */ + if ((wHubCharacteristics & HUB_CHAR_COMPOUND) && + !(hub_is_superspeed(hdev))) { int i; char portstr [USB_MAXCHILDREN + 1]; for (i = 0; i < hdev->maxchild; i++) - portstr[i] = hub->descriptor->DeviceRemovable + portstr[i] = hub->descriptor->u.hs.DeviceRemovable [((i + 1) / 8)] & (1 << ((i + 1) % 8)) ? 'F' : 'R'; portstr[hdev->maxchild] = 0; @@ -1253,8 +1290,14 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) desc = intf->cur_altsetting; hdev = interface_to_usbdev(intf); - /* Hubs have proper suspend/resume support */ - usb_enable_autosuspend(hdev); + /* Hubs have proper suspend/resume support. USB 3.0 device suspend is + * different from USB 2.0/1.1 device suspend, and unfortunately we + * don't support it yet. So leave autosuspend disabled for USB 3.0 + * external hubs for now. Enable autosuspend for USB 3.0 roothubs, + * since that isn't a "real" hub. + */ + if (!hub_is_superspeed(hdev) || !hdev->parent) + usb_enable_autosuspend(hdev); if (hdev->level == MAX_TOPO_LEVEL) { dev_err(&intf->dev, @@ -1501,6 +1544,13 @@ void usb_set_device_state(struct usb_device *udev, EXPORT_SYMBOL_GPL(usb_set_device_state); /* + * Choose a device number. + * + * Device numbers are used as filenames in usbfs. On USB-1.1 and + * USB-2.0 buses they are also used as device addresses, however on + * USB-3.0 buses the address is assigned by the controller hardware + * and it usually is not the same as the device number. + * * WUSB devices are simple: they have no hubs behind, so the mapping * device <-> virtual port number becomes 1:1. Why? to simplify the * life of the device connection logic in @@ -1522,7 +1572,7 @@ EXPORT_SYMBOL_GPL(usb_set_device_state); * the HCD must setup data structures before issuing a set address * command to the hardware. */ -static void choose_address(struct usb_device *udev) +static void choose_devnum(struct usb_device *udev) { int devnum; struct usb_bus *bus = udev->bus; @@ -1547,7 +1597,7 @@ static void choose_address(struct usb_device *udev) } } -static void release_address(struct usb_device *udev) +static void release_devnum(struct usb_device *udev) { if (udev->devnum > 0) { clear_bit(udev->devnum, udev->bus->devmap.devicemap); @@ -1555,7 +1605,7 @@ static void release_address(struct usb_device *udev) } } -static void update_address(struct usb_device *udev, int devnum) +static void update_devnum(struct usb_device *udev, int devnum) { /* The address for a WUSB device is managed by wusbcore. */ if (!udev->wusb) @@ -1602,7 +1652,8 @@ void usb_disconnect(struct usb_device **pdev) * this quiesces everyting except pending urbs. */ usb_set_device_state(udev, USB_STATE_NOTATTACHED); - dev_info (&udev->dev, "USB disconnect, address %d\n", udev->devnum); + dev_info(&udev->dev, "USB disconnect, device number %d\n", + udev->devnum); usb_lock_device(udev); @@ -1632,7 +1683,7 @@ void usb_disconnect(struct usb_device **pdev) /* Free the device number and delete the parent's children[] * (or root_hub) pointer. */ - release_address(udev); + release_devnum(udev); /* Avoid races with recursively_mark_NOTATTACHED() */ spin_lock_irq(&device_state_lock); @@ -2017,7 +2068,7 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1, (portstatus & USB_PORT_STAT_ENABLE)) { if (hub_is_wusb(hub)) udev->speed = USB_SPEED_WIRELESS; - else if (portstatus & USB_PORT_STAT_SUPER_SPEED) + else if (hub_is_superspeed(hub->hdev)) udev->speed = USB_SPEED_SUPER; else if (portstatus & USB_PORT_STAT_HIGH_SPEED) udev->speed = USB_SPEED_HIGH; @@ -2073,7 +2124,7 @@ static int hub_port_reset(struct usb_hub *hub, int port1, case 0: /* TRSTRCY = 10 ms; plus some extra */ msleep(10 + 40); - update_address(udev, 0); + update_devnum(udev, 0); if (hcd->driver->reset_device) { status = hcd->driver->reset_device(hcd, udev); if (status < 0) { @@ -2636,7 +2687,7 @@ static int hub_set_address(struct usb_device *udev, int devnum) USB_REQ_SET_ADDRESS, 0, devnum, 0, NULL, 0, USB_CTRL_SET_TIMEOUT); if (retval == 0) { - update_address(udev, devnum); + update_devnum(udev, devnum); /* Device now using proper address. */ usb_set_device_state(udev, USB_STATE_ADDRESS); usb_ep0_reinit(udev); @@ -2741,9 +2792,9 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, } if (udev->speed != USB_SPEED_SUPER) dev_info(&udev->dev, - "%s %s speed %sUSB device using %s and address %d\n", + "%s %s speed %sUSB device number %d using %s\n", (udev->config) ? "reset" : "new", speed, type, - udev->bus->controller->driver->name, devnum); + devnum, udev->bus->controller->driver->name); /* Set up TT records, if needed */ if (hdev->tt) { @@ -2773,10 +2824,6 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, * value. */ for (i = 0; i < GET_DESCRIPTOR_TRIES; (++i, msleep(100))) { - /* - * An xHCI controller cannot send any packets to a device until - * a set address command successfully completes. - */ if (USE_NEW_SCHEME(retry_counter) && !(hcd->driver->flags & HCD_USB3)) { struct usb_device_descriptor *buf; int r = 0; @@ -2859,9 +2906,9 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, if (udev->speed == USB_SPEED_SUPER) { devnum = udev->devnum; dev_info(&udev->dev, - "%s SuperSpeed USB device using %s and address %d\n", + "%s SuperSpeed USB device number %d using %s\n", (udev->config) ? "reset" : "new", - udev->bus->controller->driver->name, devnum); + devnum, udev->bus->controller->driver->name); } /* cope with hardware quirkiness: @@ -2924,7 +2971,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, fail: if (retval) { hub_port_disable(hub, port1, 0); - update_address(udev, devnum); /* for disconnect processing */ + update_devnum(udev, devnum); /* for disconnect processing */ } mutex_unlock(&usb_address0_mutex); return retval; @@ -3015,7 +3062,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, dev_dbg (hub_dev, "port %d, status %04x, change %04x, %s\n", - port1, portstatus, portchange, portspeed (portstatus)); + port1, portstatus, portchange, portspeed(hub, portstatus)); if (hub->has_indicators) { set_port_led(hub, port1, HUB_LED_AUTO); @@ -3116,32 +3163,13 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, udev->level = hdev->level + 1; udev->wusb = hub_is_wusb(hub); - /* - * USB 3.0 devices are reset automatically before the connect - * port status change appears, and the root hub port status - * shows the correct speed. We also get port change - * notifications for USB 3.0 devices from the USB 3.0 portion of - * an external USB 3.0 hub, but this isn't handled correctly yet - * FIXME. - */ - - if (!(hcd->driver->flags & HCD_USB3)) - udev->speed = USB_SPEED_UNKNOWN; - else if ((hdev->parent == NULL) && - (portstatus & USB_PORT_STAT_SUPER_SPEED)) + /* Only USB 3.0 devices are connected to SuperSpeed hubs. */ + if (hub_is_superspeed(hub->hdev)) udev->speed = USB_SPEED_SUPER; else udev->speed = USB_SPEED_UNKNOWN; - /* - * Set the address. - * Note xHCI needs to issue an address device command later - * in the hub_port_init sequence for SS/HS/FS/LS devices, - * and xHC will assign an address to the device. But use - * kernel assigned address here, to avoid any address conflict - * issue. - */ - choose_address(udev); + choose_devnum(udev); if (udev->devnum <= 0) { status = -ENOTCONN; /* Don't retry */ goto loop; @@ -3233,7 +3261,7 @@ loop_disable: hub_port_disable(hub, port1, 1); loop: usb_ep0_reinit(udev); - release_address(udev); + release_devnum(udev); hub_free_dev(udev); usb_put_dev(udev); if ((status == -ENOTCONN) || (status == -ENOTSUPP)) @@ -3410,12 +3438,19 @@ static void hub_events(void) } if (portchange & USB_PORT_STAT_C_OVERCURRENT) { - dev_err (hub_dev, - "over-current change on port %d\n", - i); + u16 status = 0; + u16 unused; + + dev_dbg(hub_dev, "over-current change on port " + "%d\n", i); clear_port_feature(hdev, i, USB_PORT_FEAT_C_OVER_CURRENT); + msleep(100); /* Cool down */ hub_power_on(hub, true); + hub_port_status(hub, i, &status, &unused); + if (status & USB_PORT_STAT_OVERCURRENT) + dev_err(hub_dev, "over-current " + "condition on port %d\n", i); } if (portchange & USB_PORT_STAT_C_RESET) { @@ -3425,6 +3460,25 @@ static void hub_events(void) clear_port_feature(hdev, i, USB_PORT_FEAT_C_RESET); } + if ((portchange & USB_PORT_STAT_C_BH_RESET) && + hub_is_superspeed(hub->hdev)) { + dev_dbg(hub_dev, + "warm reset change on port %d\n", + i); + clear_port_feature(hdev, i, + USB_PORT_FEAT_C_BH_PORT_RESET); + } + if (portchange & USB_PORT_STAT_C_LINK_STATE) { + clear_port_feature(hub->hdev, i, + USB_PORT_FEAT_C_PORT_LINK_STATE); + } + if (portchange & USB_PORT_STAT_C_CONFIG_ERROR) { + dev_warn(hub_dev, + "config error on port %d\n", + i); + clear_port_feature(hub->hdev, i, + USB_PORT_FEAT_C_PORT_CONFIG_ERROR); + } if (connect_change) hub_port_connect_change(hub, i, @@ -3447,10 +3501,17 @@ static void hub_events(void) hub->limited_power = 0; } if (hubchange & HUB_CHANGE_OVERCURRENT) { - dev_dbg (hub_dev, "overcurrent change\n"); - msleep(500); /* Cool down */ + u16 status = 0; + u16 unused; + + dev_dbg(hub_dev, "over-current change\n"); clear_hub_feature(hdev, C_HUB_OVER_CURRENT); + msleep(500); /* Cool down */ hub_power_on(hub, true); + hub_hub_status(hub, &status, &unused); + if (status & HUB_STATUS_OVERCURRENT) + dev_err(hub_dev, "over-current " + "condition\n"); } } @@ -3699,13 +3760,13 @@ static int usb_reset_and_verify_device(struct usb_device *udev) if (!udev->actconfig) goto done; - mutex_lock(&hcd->bandwidth_mutex); + mutex_lock(hcd->bandwidth_mutex); ret = usb_hcd_alloc_bandwidth(udev, udev->actconfig, NULL, NULL); if (ret < 0) { dev_warn(&udev->dev, "Busted HC? Not enough HCD resources for " "old configuration.\n"); - mutex_unlock(&hcd->bandwidth_mutex); + mutex_unlock(hcd->bandwidth_mutex); goto re_enumerate; } ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), @@ -3716,10 +3777,10 @@ static int usb_reset_and_verify_device(struct usb_device *udev) dev_err(&udev->dev, "can't restore configuration #%d (error=%d)\n", udev->actconfig->desc.bConfigurationValue, ret); - mutex_unlock(&hcd->bandwidth_mutex); + mutex_unlock(hcd->bandwidth_mutex); goto re_enumerate; } - mutex_unlock(&hcd->bandwidth_mutex); + mutex_unlock(hcd->bandwidth_mutex); usb_set_device_state(udev, USB_STATE_CONFIGURED); /* Put interfaces back into the same altsettings as before. diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 832487423826..5701e857392b 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1284,12 +1284,12 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) /* Make sure we have enough bandwidth for this alternate interface. * Remove the current alt setting and add the new alt setting. */ - mutex_lock(&hcd->bandwidth_mutex); + mutex_lock(hcd->bandwidth_mutex); ret = usb_hcd_alloc_bandwidth(dev, NULL, iface->cur_altsetting, alt); if (ret < 0) { dev_info(&dev->dev, "Not enough bandwidth for altsetting %d\n", alternate); - mutex_unlock(&hcd->bandwidth_mutex); + mutex_unlock(hcd->bandwidth_mutex); return ret; } @@ -1311,10 +1311,10 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) } else if (ret < 0) { /* Re-instate the old alt setting */ usb_hcd_alloc_bandwidth(dev, NULL, alt, iface->cur_altsetting); - mutex_unlock(&hcd->bandwidth_mutex); + mutex_unlock(hcd->bandwidth_mutex); return ret; } - mutex_unlock(&hcd->bandwidth_mutex); + mutex_unlock(hcd->bandwidth_mutex); /* FIXME drivers shouldn't need to replicate/bugfix the logic here * when they implement async or easily-killable versions of this or @@ -1413,7 +1413,7 @@ int usb_reset_configuration(struct usb_device *dev) config = dev->actconfig; retval = 0; - mutex_lock(&hcd->bandwidth_mutex); + mutex_lock(hcd->bandwidth_mutex); /* Make sure we have enough bandwidth for each alternate setting 0 */ for (i = 0; i < config->desc.bNumInterfaces; i++) { struct usb_interface *intf = config->interface[i]; @@ -1442,7 +1442,7 @@ reset_old_alts: usb_hcd_alloc_bandwidth(dev, NULL, alt, intf->cur_altsetting); } - mutex_unlock(&hcd->bandwidth_mutex); + mutex_unlock(hcd->bandwidth_mutex); return retval; } retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), @@ -1451,7 +1451,7 @@ reset_old_alts: NULL, 0, USB_CTRL_SET_TIMEOUT); if (retval < 0) goto reset_old_alts; - mutex_unlock(&hcd->bandwidth_mutex); + mutex_unlock(hcd->bandwidth_mutex); /* re-init hc/hcd interface/endpoint state */ for (i = 0; i < config->desc.bNumInterfaces; i++) { @@ -1739,10 +1739,10 @@ free_interfaces: * host controller will not allow submissions to dropped endpoints. If * this call fails, the device state is unchanged. */ - mutex_lock(&hcd->bandwidth_mutex); + mutex_lock(hcd->bandwidth_mutex); ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL); if (ret < 0) { - mutex_unlock(&hcd->bandwidth_mutex); + mutex_unlock(hcd->bandwidth_mutex); usb_autosuspend_device(dev); goto free_interfaces; } @@ -1761,11 +1761,11 @@ free_interfaces: if (!cp) { usb_set_device_state(dev, USB_STATE_ADDRESS); usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL); - mutex_unlock(&hcd->bandwidth_mutex); + mutex_unlock(hcd->bandwidth_mutex); usb_autosuspend_device(dev); goto free_interfaces; } - mutex_unlock(&hcd->bandwidth_mutex); + mutex_unlock(hcd->bandwidth_mutex); usb_set_device_state(dev, USB_STATE_CONFIGURED); /* Initialize the new interface structures and the diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index c14fc082864f..ae334b067c13 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -366,7 +366,16 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) if (xfertype == USB_ENDPOINT_XFER_ISOC) { int n, len; - /* FIXME SuperSpeed isoc endpoints have up to 16 bursts */ + /* SuperSpeed isoc endpoints have up to 16 bursts of up to + * 3 packets each + */ + if (dev->speed == USB_SPEED_SUPER) { + int burst = 1 + ep->ss_ep_comp.bMaxBurst; + int mult = USB_SS_MULT(ep->ss_ep_comp.bmAttributes); + max *= burst; + max *= mult; + } + /* "high bandwidth" mode, 1-3 packets/uframe? */ if (dev->speed == USB_SPEED_HIGH) { int mult = 1 + ((max >> 11) & 0x03); diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index b975450f403e..a9cf484ecae4 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -122,6 +122,19 @@ static inline int is_usb_device_driver(struct device_driver *drv) for_devices; } +/* translate USB error codes to codes user space understands */ +static inline int usb_translate_errors(int error_code) +{ + switch (error_code) { + case 0: + case -ENOMEM: + case -ENODEV: + return error_code; + default: + return -EIO; + } +} + /* for labeling diagnostics */ extern const char *usbcore_name; diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c index 94ecdbc758ce..0bc06e2bcfcb 100644 --- a/drivers/usb/early/ehci-dbgp.c +++ b/drivers/usb/early/ehci-dbgp.c @@ -601,7 +601,7 @@ try_again: dbgp_printk("dbgp_bulk_write failed: %d\n", ret); goto err; } - dbgp_printk("small write doned\n"); + dbgp_printk("small write done\n"); dbgp_not_safe = 0; return 0; diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index d50099675f28..bfde50e20b30 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -176,6 +176,18 @@ config USB_FSL_USB2 default USB_GADGET select USB_GADGET_SELECTED +config USB_GADGET_FUSB300 + boolean "Faraday FUSB300 USB Peripheral Controller" + select USB_GADGET_DUALSPEED + help + Faraday usb device controller FUSB300 driver + +config USB_FUSB300 + tristate + depends on USB_GADGET_FUSB300 + default USB_GADGET + select USB_GADGET_SELECTED + config USB_GADGET_LH7A40X boolean "LH7A40X" depends on ARCH_LH7A40X @@ -540,7 +552,7 @@ config USB_GADGET_CI13XXX_MSM boolean "MIPS USB CI13xxx for MSM" depends on ARCH_MSM select USB_GADGET_DUALSPEED - select USB_MSM_OTG_72K + select USB_MSM_OTG help MSM SoC has chipidea USB controller. This driver uses ci13xxx_udc core. diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 55f5e8ae5924..305286e181d5 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_USB_EG20T) += pch_udc.o obj-$(CONFIG_USB_PXA_U2O) += mv_udc.o mv_udc-y := mv_udc_core.o mv_udc_phy.o obj-$(CONFIG_USB_CI13XXX_MSM) += ci13xxx_msm.o +obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o # # USB gadget drivers diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index bdec36acd0fa..bb8ddf0469f9 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -1798,8 +1798,10 @@ static int __init at91udc_probe(struct platform_device *pdev) } retval = device_register(&udc->gadget.dev); - if (retval < 0) + if (retval < 0) { + put_device(&udc->gadget.dev); goto fail0b; + } /* don't do anything until we have both gadget driver and VBUS */ clk_enable(udc->iclk); diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index a1c67ae1572a..e09178bc1450 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -435,20 +435,6 @@ static int hw_ep_get_halt(int num, int dir) } /** - * hw_ep_is_primed: test if endpoint is primed (execute without interruption) - * @num: endpoint number - * @dir: endpoint direction - * - * This function returns true if endpoint primed - */ -static int hw_ep_is_primed(int num, int dir) -{ - u32 reg = hw_cread(CAP_ENDPTPRIME, ~0) | hw_cread(CAP_ENDPTSTAT, ~0); - - return test_bit(hw_ep_bit(num, dir), (void *)®); -} - -/** * hw_test_and_clear_setup_status: test & clear setup status (execute without * interruption) * @n: bit number (endpoint) @@ -472,10 +458,6 @@ static int hw_ep_prime(int num, int dir, int is_ctrl) { int n = hw_ep_bit(num, dir); - /* the caller should flush first */ - if (hw_ep_is_primed(num, dir)) - return -EBUSY; - if (is_ctrl && dir == RX && hw_cread(CAP_ENDPTSETUPSTAT, BIT(num))) return -EAGAIN; @@ -1434,6 +1416,8 @@ static inline u8 _usb_addr(struct ci13xxx_ep *ep) static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) { unsigned i; + int ret = 0; + unsigned length = mReq->req.length; trace("%p, %p", mEp, mReq); @@ -1441,53 +1425,91 @@ static int _hardware_enqueue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) if (mReq->req.status == -EALREADY) return -EALREADY; - if (hw_ep_is_primed(mEp->num, mEp->dir)) - return -EBUSY; - mReq->req.status = -EALREADY; - - if (mReq->req.length && !mReq->req.dma) { + if (length && !mReq->req.dma) { mReq->req.dma = \ dma_map_single(mEp->device, mReq->req.buf, - mReq->req.length, mEp->dir ? - DMA_TO_DEVICE : DMA_FROM_DEVICE); + length, mEp->dir ? DMA_TO_DEVICE : + DMA_FROM_DEVICE); if (mReq->req.dma == 0) return -ENOMEM; mReq->map = 1; } + if (mReq->req.zero && length && (length % mEp->ep.maxpacket == 0)) { + mReq->zptr = dma_pool_alloc(mEp->td_pool, GFP_ATOMIC, + &mReq->zdma); + if (mReq->zptr == NULL) { + if (mReq->map) { + dma_unmap_single(mEp->device, mReq->req.dma, + length, mEp->dir ? DMA_TO_DEVICE : + DMA_FROM_DEVICE); + mReq->req.dma = 0; + mReq->map = 0; + } + return -ENOMEM; + } + memset(mReq->zptr, 0, sizeof(*mReq->zptr)); + mReq->zptr->next = TD_TERMINATE; + mReq->zptr->token = TD_STATUS_ACTIVE; + if (!mReq->req.no_interrupt) + mReq->zptr->token |= TD_IOC; + } /* * TD configuration * TODO - handle requests which spawns into several TDs */ memset(mReq->ptr, 0, sizeof(*mReq->ptr)); - mReq->ptr->next |= TD_TERMINATE; - mReq->ptr->token = mReq->req.length << ffs_nr(TD_TOTAL_BYTES); + mReq->ptr->token = length << ffs_nr(TD_TOTAL_BYTES); mReq->ptr->token &= TD_TOTAL_BYTES; - mReq->ptr->token |= TD_IOC; mReq->ptr->token |= TD_STATUS_ACTIVE; + if (mReq->zptr) { + mReq->ptr->next = mReq->zdma; + } else { + mReq->ptr->next = TD_TERMINATE; + if (!mReq->req.no_interrupt) + mReq->ptr->token |= TD_IOC; + } mReq->ptr->page[0] = mReq->req.dma; for (i = 1; i < 5; i++) mReq->ptr->page[i] = (mReq->req.dma + i * CI13XXX_PAGE_SIZE) & ~TD_RESERVED_MASK; - /* - * QH configuration - * At this point it's guaranteed exclusive access to qhead - * (endpt is not primed) so it's no need to use tripwire - */ + if (!list_empty(&mEp->qh.queue)) { + struct ci13xxx_req *mReqPrev; + int n = hw_ep_bit(mEp->num, mEp->dir); + int tmp_stat; + + mReqPrev = list_entry(mEp->qh.queue.prev, + struct ci13xxx_req, queue); + if (mReqPrev->zptr) + mReqPrev->zptr->next = mReq->dma & TD_ADDR_MASK; + else + mReqPrev->ptr->next = mReq->dma & TD_ADDR_MASK; + wmb(); + if (hw_cread(CAP_ENDPTPRIME, BIT(n))) + goto done; + do { + hw_cwrite(CAP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW); + tmp_stat = hw_cread(CAP_ENDPTSTAT, BIT(n)); + } while (!hw_cread(CAP_USBCMD, USBCMD_ATDTW)); + hw_cwrite(CAP_USBCMD, USBCMD_ATDTW, 0); + if (tmp_stat) + goto done; + } + + /* QH configuration */ mEp->qh.ptr->td.next = mReq->dma; /* TERMINATE = 0 */ mEp->qh.ptr->td.token &= ~TD_STATUS; /* clear status */ - if (mReq->req.zero == 0) - mEp->qh.ptr->cap |= QH_ZLT; - else - mEp->qh.ptr->cap &= ~QH_ZLT; + mEp->qh.ptr->cap |= QH_ZLT; wmb(); /* synchronize before ep prime */ - return hw_ep_prime(mEp->num, mEp->dir, + ret = hw_ep_prime(mEp->num, mEp->dir, mEp->type == USB_ENDPOINT_XFER_CONTROL); +done: + return ret; } /** @@ -1504,8 +1526,15 @@ static int _hardware_dequeue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) if (mReq->req.status != -EALREADY) return -EINVAL; - if (hw_ep_is_primed(mEp->num, mEp->dir)) - hw_ep_flush(mEp->num, mEp->dir); + if ((TD_STATUS_ACTIVE & mReq->ptr->token) != 0) + return -EBUSY; + + if (mReq->zptr) { + if ((TD_STATUS_ACTIVE & mReq->zptr->token) != 0) + return -EBUSY; + dma_pool_free(mEp->td_pool, mReq->zptr, mReq->zdma); + mReq->zptr = NULL; + } mReq->req.status = 0; @@ -1517,9 +1546,7 @@ static int _hardware_dequeue(struct ci13xxx_ep *mEp, struct ci13xxx_req *mReq) } mReq->req.status = mReq->ptr->token & TD_STATUS; - if ((TD_STATUS_ACTIVE & mReq->req.status) != 0) - mReq->req.status = -ECONNRESET; - else if ((TD_STATUS_HALTED & mReq->req.status) != 0) + if ((TD_STATUS_HALTED & mReq->req.status) != 0) mReq->req.status = -1; else if ((TD_STATUS_DT_ERR & mReq->req.status) != 0) mReq->req.status = -1; @@ -1581,12 +1608,19 @@ static int _gadget_stop_activity(struct usb_gadget *gadget) { struct usb_ep *ep; struct ci13xxx *udc = container_of(gadget, struct ci13xxx, gadget); + unsigned long flags; trace("%p", gadget); if (gadget == NULL) return -EINVAL; + spin_lock_irqsave(udc->lock, flags); + udc->gadget.speed = USB_SPEED_UNKNOWN; + udc->remote_wakeup = 0; + udc->suspended = 0; + spin_unlock_irqrestore(udc->lock, flags); + /* flush all endpoints */ gadget_for_each_ep(ep, gadget) { usb_ep_fifo_flush(ep); @@ -1720,7 +1754,8 @@ __acquires(mEp->lock) } if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) { - /* TODO: D1 - Remote Wakeup; D0 - Self Powered */ + /* Assume that device is bus powered for now. */ + *((u16 *)req->buf) = _udc->remote_wakeup << 1; retval = 0; } else if ((setup->bRequestType & USB_RECIP_MASK) \ == USB_RECIP_ENDPOINT) { @@ -1749,6 +1784,28 @@ __acquires(mEp->lock) } /** + * isr_setup_status_complete: setup_status request complete function + * @ep: endpoint + * @req: request handled + * + * Caller must release lock. Put the port in test mode if test mode + * feature is selected. + */ +static void +isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req) +{ + struct ci13xxx *udc = req->context; + unsigned long flags; + + trace("%p, %p", ep, req); + + spin_lock_irqsave(udc->lock, flags); + if (udc->test_mode) + hw_port_test_set(udc->test_mode); + spin_unlock_irqrestore(udc->lock, flags); +} + +/** * isr_setup_status_phase: queues the status phase of a setup transation * @udc: udc struct * @@ -1764,6 +1821,8 @@ __acquires(mEp->lock) trace("%p", udc); mEp = (udc->ep0_dir == TX) ? &udc->ep0out : &udc->ep0in; + udc->status->context = udc; + udc->status->complete = isr_setup_status_complete; spin_unlock(mEp->lock); retval = usb_ep_queue(&mEp->ep, udc->status, GFP_ATOMIC); @@ -1783,7 +1842,7 @@ static int isr_tr_complete_low(struct ci13xxx_ep *mEp) __releases(mEp->lock) __acquires(mEp->lock) { - struct ci13xxx_req *mReq; + struct ci13xxx_req *mReq, *mReqTemp; int retval; trace("%p", mEp); @@ -1791,34 +1850,25 @@ __acquires(mEp->lock) if (list_empty(&mEp->qh.queue)) return -EINVAL; - /* pop oldest request */ - mReq = list_entry(mEp->qh.queue.next, - struct ci13xxx_req, queue); - list_del_init(&mReq->queue); - - retval = _hardware_dequeue(mEp, mReq); - if (retval < 0) { - dbg_event(_usb_addr(mEp), "DONE", retval); - goto done; - } - - dbg_done(_usb_addr(mEp), mReq->ptr->token, retval); - - if (!list_empty(&mEp->qh.queue)) { - struct ci13xxx_req* mReqEnq; - - mReqEnq = list_entry(mEp->qh.queue.next, - struct ci13xxx_req, queue); - _hardware_enqueue(mEp, mReqEnq); + list_for_each_entry_safe(mReq, mReqTemp, &mEp->qh.queue, + queue) { + retval = _hardware_dequeue(mEp, mReq); + if (retval < 0) + break; + list_del_init(&mReq->queue); + dbg_done(_usb_addr(mEp), mReq->ptr->token, retval); + if (mReq->req.complete != NULL) { + spin_unlock(mEp->lock); + mReq->req.complete(&mEp->ep, &mReq->req); + spin_lock(mEp->lock); + } } - if (mReq->req.complete != NULL) { - spin_unlock(mEp->lock); - mReq->req.complete(&mEp->ep, &mReq->req); - spin_lock(mEp->lock); - } + if (retval == EBUSY) + retval = 0; + if (retval < 0) + dbg_event(_usb_addr(mEp), "DONE", retval); - done: return retval; } @@ -1833,6 +1883,7 @@ __releases(udc->lock) __acquires(udc->lock) { unsigned i; + u8 tmode = 0; trace("%p", udc); @@ -1895,22 +1946,32 @@ __acquires(udc->lock) switch (req.bRequest) { case USB_REQ_CLEAR_FEATURE: - if (type != (USB_DIR_OUT|USB_RECIP_ENDPOINT) && - le16_to_cpu(req.wValue) != USB_ENDPOINT_HALT) - goto delegate; - if (req.wLength != 0) - break; - num = le16_to_cpu(req.wIndex); - num &= USB_ENDPOINT_NUMBER_MASK; - if (!udc->ci13xxx_ep[num].wedge) { - spin_unlock(udc->lock); - err = usb_ep_clear_halt( - &udc->ci13xxx_ep[num].ep); - spin_lock(udc->lock); - if (err) + if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) && + le16_to_cpu(req.wValue) == + USB_ENDPOINT_HALT) { + if (req.wLength != 0) break; + num = le16_to_cpu(req.wIndex); + num &= USB_ENDPOINT_NUMBER_MASK; + if (!udc->ci13xxx_ep[num].wedge) { + spin_unlock(udc->lock); + err = usb_ep_clear_halt( + &udc->ci13xxx_ep[num].ep); + spin_lock(udc->lock); + if (err) + break; + } + err = isr_setup_status_phase(udc); + } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) && + le16_to_cpu(req.wValue) == + USB_DEVICE_REMOTE_WAKEUP) { + if (req.wLength != 0) + break; + udc->remote_wakeup = 0; + err = isr_setup_status_phase(udc); + } else { + goto delegate; } - err = isr_setup_status_phase(udc); break; case USB_REQ_GET_STATUS: if (type != (USB_DIR_IN|USB_RECIP_DEVICE) && @@ -1934,20 +1995,48 @@ __acquires(udc->lock) err = isr_setup_status_phase(udc); break; case USB_REQ_SET_FEATURE: - if (type != (USB_DIR_OUT|USB_RECIP_ENDPOINT) && - le16_to_cpu(req.wValue) != USB_ENDPOINT_HALT) - goto delegate; - if (req.wLength != 0) - break; - num = le16_to_cpu(req.wIndex); - num &= USB_ENDPOINT_NUMBER_MASK; + if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) && + le16_to_cpu(req.wValue) == + USB_ENDPOINT_HALT) { + if (req.wLength != 0) + break; + num = le16_to_cpu(req.wIndex); + num &= USB_ENDPOINT_NUMBER_MASK; - spin_unlock(udc->lock); - err = usb_ep_set_halt(&udc->ci13xxx_ep[num].ep); - spin_lock(udc->lock); - if (err) - break; - err = isr_setup_status_phase(udc); + spin_unlock(udc->lock); + err = usb_ep_set_halt(&udc->ci13xxx_ep[num].ep); + spin_lock(udc->lock); + if (!err) + isr_setup_status_phase(udc); + } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) { + if (req.wLength != 0) + break; + switch (le16_to_cpu(req.wValue)) { + case USB_DEVICE_REMOTE_WAKEUP: + udc->remote_wakeup = 1; + err = isr_setup_status_phase(udc); + break; + case USB_DEVICE_TEST_MODE: + tmode = le16_to_cpu(req.wIndex) >> 8; + switch (tmode) { + case TEST_J: + case TEST_K: + case TEST_SE0_NAK: + case TEST_PACKET: + case TEST_FORCE_EN: + udc->test_mode = tmode; + err = isr_setup_status_phase( + udc); + break; + default: + break; + } + default: + goto delegate; + } + } else { + goto delegate; + } break; default: delegate: @@ -2178,15 +2267,15 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req, /* push request */ mReq->req.status = -EINPROGRESS; mReq->req.actual = 0; - list_add_tail(&mReq->queue, &mEp->qh.queue); - if (list_is_singular(&mEp->qh.queue)) - retval = _hardware_enqueue(mEp, mReq); + retval = _hardware_enqueue(mEp, mReq); if (retval == -EALREADY) { dbg_event(_usb_addr(mEp), "QUEUE", retval); retval = 0; } + if (!retval) + list_add_tail(&mReq->queue, &mEp->qh.queue); done: spin_unlock_irqrestore(mEp->lock, flags); @@ -2206,19 +2295,25 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req) trace("%p, %p", ep, req); - if (ep == NULL || req == NULL || mEp->desc == NULL || - list_empty(&mReq->queue) || list_empty(&mEp->qh.queue)) + if (ep == NULL || req == NULL || mReq->req.status != -EALREADY || + mEp->desc == NULL || list_empty(&mReq->queue) || + list_empty(&mEp->qh.queue)) return -EINVAL; spin_lock_irqsave(mEp->lock, flags); dbg_event(_usb_addr(mEp), "DEQUEUE", 0); - if (mReq->req.status == -EALREADY) - _hardware_dequeue(mEp, mReq); + hw_ep_flush(mEp->num, mEp->dir); /* pop request */ list_del_init(&mReq->queue); + if (mReq->map) { + dma_unmap_single(mEp->device, mReq->req.dma, mReq->req.length, + mEp->dir ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + mReq->req.dma = 0; + mReq->map = 0; + } req->status = -ECONNRESET; if (mReq->req.complete != NULL) { @@ -2377,6 +2472,31 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active) return 0; } +static int ci13xxx_wakeup(struct usb_gadget *_gadget) +{ + struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget); + unsigned long flags; + int ret = 0; + + trace(); + + spin_lock_irqsave(udc->lock, flags); + if (!udc->remote_wakeup) { + ret = -EOPNOTSUPP; + dbg_trace("remote wakeup feature is not enabled\n"); + goto out; + } + if (!hw_cread(CAP_PORTSC, PORTSC_SUSP)) { + ret = -EINVAL; + dbg_trace("port is not suspended\n"); + goto out; + } + hw_cwrite(CAP_PORTSC, PORTSC_FPR, PORTSC_FPR); +out: + spin_unlock_irqrestore(udc->lock, flags); + return ret; +} + /** * Device operations part of the API to the USB controller hardware, * which don't involve endpoints (or i/o) @@ -2384,6 +2504,7 @@ static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active) */ static const struct usb_gadget_ops usb_gadget_ops = { .vbus_session = ci13xxx_vbus_session, + .wakeup = ci13xxx_wakeup, }; /** @@ -2626,6 +2747,12 @@ static irqreturn_t udc_irq(void) isr_statistics.pci++; udc->gadget.speed = hw_port_is_high_speed() ? USB_SPEED_HIGH : USB_SPEED_FULL; + if (udc->suspended) { + spin_unlock(udc->lock); + udc->driver->resume(&udc->gadget); + spin_lock(udc->lock); + udc->suspended = 0; + } } if (USBi_UEI & intr) isr_statistics.uei++; @@ -2633,8 +2760,15 @@ static irqreturn_t udc_irq(void) isr_statistics.ui++; isr_tr_complete_handler(udc); } - if (USBi_SLI & intr) + if (USBi_SLI & intr) { + if (udc->gadget.speed != USB_SPEED_UNKNOWN) { + udc->suspended = 1; + spin_unlock(udc->lock); + udc->driver->suspend(&udc->gadget); + spin_lock(udc->lock); + } isr_statistics.sli++; + } retval = IRQ_HANDLED; } else { isr_statistics.none++; diff --git a/drivers/usb/gadget/ci13xxx_udc.h b/drivers/usb/gadget/ci13xxx_udc.h index a2492b65f98c..23707775cb43 100644 --- a/drivers/usb/gadget/ci13xxx_udc.h +++ b/drivers/usb/gadget/ci13xxx_udc.h @@ -33,6 +33,7 @@ struct ci13xxx_td { /* 0 */ u32 next; #define TD_TERMINATE BIT(0) +#define TD_ADDR_MASK (0xFFFFFFEUL << 5) /* 1 */ u32 token; #define TD_STATUS (0x00FFUL << 0) @@ -74,6 +75,8 @@ struct ci13xxx_req { struct list_head queue; struct ci13xxx_td *ptr; dma_addr_t dma; + struct ci13xxx_td *zptr; + dma_addr_t zdma; }; /* Extension of usb_ep */ @@ -125,6 +128,10 @@ struct ci13xxx { u32 ep0_dir; /* ep0 direction */ #define ep0out ci13xxx_ep[0] #define ep0in ci13xxx_ep[16] + u8 remote_wakeup; /* Is remote wakeup feature + enabled by the host? */ + u8 suspended; /* suspended by the host */ + u8 test_mode; /* the selected test mode */ struct usb_gadget_driver *driver; /* 3rd party gadget driver */ struct ci13xxx_udc_driver *udc_driver; /* device controller driver */ @@ -152,6 +159,7 @@ struct ci13xxx { #define USBCMD_RS BIT(0) #define USBCMD_RST BIT(1) #define USBCMD_SUTW BIT(13) +#define USBCMD_ATDTW BIT(14) /* USBSTS & USBINTR */ #define USBi_UI BIT(0) @@ -165,6 +173,7 @@ struct ci13xxx { #define DEVICEADDR_USBADR (0x7FUL << 25) /* PORTSC */ +#define PORTSC_FPR BIT(6) #define PORTSC_SUSP BIT(7) #define PORTSC_HSP BIT(9) #define PORTSC_PTC (0x0FUL << 16) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 1ba4befe336b..c2251c40a205 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -813,7 +813,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) */ req->zero = 0; req->complete = composite_setup_complete; - req->length = USB_BUFSIZ; + req->length = 0; gadget->ep0->driver_data = cdev; switch (ctrl->bRequest) { @@ -887,7 +887,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) case USB_REQ_SET_INTERFACE: if (ctrl->bRequestType != USB_RECIP_INTERFACE) goto unknown; - if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES) + if (!cdev->config || intf >= MAX_CONFIG_INTERFACES) break; f = cdev->config->interface[intf]; if (!f) @@ -899,7 +899,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) case USB_REQ_GET_INTERFACE: if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)) goto unknown; - if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES) + if (!cdev->config || intf >= MAX_CONFIG_INTERFACES) break; f = cdev->config->interface[intf]; if (!f) @@ -928,7 +928,7 @@ unknown: */ switch (ctrl->bRequestType & USB_RECIP_MASK) { case USB_RECIP_INTERFACE: - if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES) + if (!cdev->config || intf >= MAX_CONFIG_INTERFACES) break; f = cdev->config->interface[intf]; break; @@ -1258,16 +1258,16 @@ static struct usb_gadget_driver composite_driver = { * while it was binding. That would usually be done in order to wait for * some userspace participation. */ -extern int usb_composite_probe(struct usb_composite_driver *driver, +int usb_composite_probe(struct usb_composite_driver *driver, int (*bind)(struct usb_composite_dev *cdev)) { if (!driver || !driver->dev || !bind || composite) return -EINVAL; - if (!driver->iProduct) - driver->iProduct = driver->name; if (!driver->name) driver->name = "composite"; + if (!driver->iProduct) + driver->iProduct = driver->name; composite_driver.function = (char *) driver->name; composite_driver.driver.name = driver->name; composite = driver; diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 13b9f47feecd..3214ca375d64 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -1593,8 +1593,8 @@ hub_descriptor (struct usb_hub_descriptor *desc) desc->bDescLength = 9; desc->wHubCharacteristics = cpu_to_le16(0x0001); desc->bNbrPorts = 1; - desc->bitmap [0] = 0xff; - desc->bitmap [1] = 0xff; + desc->u.hs.DeviceRemovable[0] = 0xff; + desc->u.hs.DeviceRemovable[1] = 0xff; } static int dummy_hub_control ( diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index 8a832488ccdd..9b7360ff5aa7 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -128,6 +128,13 @@ ep_matches ( } } + /* + * If the protocol driver hasn't yet decided on wMaxPacketSize + * and wants to know the maximum possible, provide the info. + */ + if (desc->wMaxPacketSize == 0) + desc->wMaxPacketSize = cpu_to_le16(ep->maxpacket); + /* endpoint maxpacket size is an input parameter, except for bulk * where it's an output parameter representing the full speed limit. * the usb spec fixes high speed bulk maxpacket at 512 bytes. diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index 1499f9e4afa8..19fffccc370d 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -368,6 +368,14 @@ static int __ffs_ep0_queue_wait(struct ffs_data *ffs, char *data, size_t len) req->buf = data; req->length = len; + /* + * UDC layer requires to provide a buffer even for ZLP, but should + * not use it at all. Let's provide some poisoned pointer to catch + * possible bug in the driver. + */ + if (req->buf == NULL) + req->buf = (void *)0xDEADBABE; + INIT_COMPLETION(ffs->ep0req_completion); ret = usb_ep_queue(ffs->gadget->ep0, req, GFP_ATOMIC); diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c index 77b1eb577029..43a49ecc1f36 100644 --- a/drivers/usb/gadget/fsl_mxc_udc.c +++ b/drivers/usb/gadget/fsl_mxc_udc.c @@ -88,15 +88,18 @@ eenahb: void fsl_udc_clk_finalize(struct platform_device *pdev) { struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; -#if defined(CONFIG_ARCH_MX35) - unsigned int v; - - /* workaround ENGcm09152 for i.MX35 */ - if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) { - v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBPHYCTRL_OTGBASE_OFFSET)); - writel(v | USBPHYCTRL_EVDO, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + - USBPHYCTRL_OTGBASE_OFFSET)); +#if defined(CONFIG_SOC_IMX35) + if (cpu_is_mx35()) { + unsigned int v; + + /* workaround ENGcm09152 for i.MX35 */ + if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) { + v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + + USBPHYCTRL_OTGBASE_OFFSET)); + writel(v | USBPHYCTRL_EVDO, + MX35_IO_ADDRESS(MX35_USB_BASE_ADDR + + USBPHYCTRL_OTGBASE_OFFSET)); + } } #endif diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index 4c55eda4bd20..912cb8e63fe3 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -766,7 +766,6 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) struct fsl_req *req = container_of(_req, struct fsl_req, req); struct fsl_udc *udc; unsigned long flags; - int is_iso = 0; /* catch various bogus parameters */ if (!_req || !req->req.complete || !req->req.buf @@ -781,7 +780,6 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) if (ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { if (req->req.length > ep->ep.maxpacket) return -EMSGSIZE; - is_iso = 1; } udc = ep->udc; diff --git a/drivers/usb/gadget/fusb300_udc.c b/drivers/usb/gadget/fusb300_udc.c new file mode 100644 index 000000000000..763d462454b9 --- /dev/null +++ b/drivers/usb/gadget/fusb300_udc.c @@ -0,0 +1,1744 @@ +/* + * Fusb300 UDC (USB gadget) + * + * Copyright (C) 2010 Faraday Technology Corp. + * + * Author : Yuan-hsin Chen <yhchen@faraday-tech.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ +#include <linux/dma-mapping.h> +#include <linux/err.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/usb/ch9.h> +#include <linux/usb/gadget.h> + +#include "fusb300_udc.h" + +MODULE_DESCRIPTION("FUSB300 USB gadget driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Yuan Hsin Chen <yhchen@faraday-tech.com>"); +MODULE_ALIAS("platform:fusb300_udc"); + +#define DRIVER_VERSION "20 October 2010" + +static const char udc_name[] = "fusb300_udc"; +static const char * const fusb300_ep_name[] = { + "ep0", "ep1", "ep2", "ep3", "ep4", "ep5", "ep6", "ep7", "ep8", "ep9", + "ep10", "ep11", "ep12", "ep13", "ep14", "ep15" +}; + +static void done(struct fusb300_ep *ep, struct fusb300_request *req, + int status); + +static void fusb300_enable_bit(struct fusb300 *fusb300, u32 offset, + u32 value) +{ + u32 reg = ioread32(fusb300->reg + offset); + + reg |= value; + iowrite32(reg, fusb300->reg + offset); +} + +static void fusb300_disable_bit(struct fusb300 *fusb300, u32 offset, + u32 value) +{ + u32 reg = ioread32(fusb300->reg + offset); + + reg &= ~value; + iowrite32(reg, fusb300->reg + offset); +} + + +static void fusb300_ep_setting(struct fusb300_ep *ep, + struct fusb300_ep_info info) +{ + ep->epnum = info.epnum; + ep->type = info.type; +} + +static int fusb300_ep_release(struct fusb300_ep *ep) +{ + if (!ep->epnum) + return 0; + ep->epnum = 0; + ep->stall = 0; + ep->wedged = 0; + return 0; +} + +static void fusb300_set_fifo_entry(struct fusb300 *fusb300, + u32 ep) +{ + u32 val = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); + + val &= ~FUSB300_EPSET1_FIFOENTRY_MSK; + val |= FUSB300_EPSET1_FIFOENTRY(FUSB300_FIFO_ENTRY_NUM); + iowrite32(val, fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); +} + +static void fusb300_set_start_entry(struct fusb300 *fusb300, + u8 ep) +{ + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); + u32 start_entry = fusb300->fifo_entry_num * FUSB300_FIFO_ENTRY_NUM; + + reg &= ~FUSB300_EPSET1_START_ENTRY_MSK ; + reg |= FUSB300_EPSET1_START_ENTRY(start_entry); + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); + if (fusb300->fifo_entry_num == FUSB300_MAX_FIFO_ENTRY) { + fusb300->fifo_entry_num = 0; + fusb300->addrofs = 0; + pr_err("fifo entry is over the maximum number!\n"); + } else + fusb300->fifo_entry_num++; +} + +/* set fusb300_set_start_entry first before fusb300_set_epaddrofs */ +static void fusb300_set_epaddrofs(struct fusb300 *fusb300, + struct fusb300_ep_info info) +{ + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum)); + + reg &= ~FUSB300_EPSET2_ADDROFS_MSK; + reg |= FUSB300_EPSET2_ADDROFS(fusb300->addrofs); + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum)); + fusb300->addrofs += (info.maxpacket + 7) / 8 * FUSB300_FIFO_ENTRY_NUM; +} + +static void ep_fifo_setting(struct fusb300 *fusb300, + struct fusb300_ep_info info) +{ + fusb300_set_fifo_entry(fusb300, info.epnum); + fusb300_set_start_entry(fusb300, info.epnum); + fusb300_set_epaddrofs(fusb300, info); +} + +static void fusb300_set_eptype(struct fusb300 *fusb300, + struct fusb300_ep_info info) +{ + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); + + reg &= ~FUSB300_EPSET1_TYPE_MSK; + reg |= FUSB300_EPSET1_TYPE(info.type); + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); +} + +static void fusb300_set_epdir(struct fusb300 *fusb300, + struct fusb300_ep_info info) +{ + u32 reg; + + if (!info.dir_in) + return; + reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); + reg &= ~FUSB300_EPSET1_DIR_MSK; + reg |= FUSB300_EPSET1_DIRIN; + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); +} + +static void fusb300_set_ep_active(struct fusb300 *fusb300, + u8 ep) +{ + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); + + reg |= FUSB300_EPSET1_ACTEN; + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(ep)); +} + +static void fusb300_set_epmps(struct fusb300 *fusb300, + struct fusb300_ep_info info) +{ + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum)); + + reg &= ~FUSB300_EPSET2_MPS_MSK; + reg |= FUSB300_EPSET2_MPS(info.maxpacket); + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum)); +} + +static void fusb300_set_interval(struct fusb300 *fusb300, + struct fusb300_ep_info info) +{ + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); + + reg &= ~FUSB300_EPSET1_INTERVAL(0x7); + reg |= FUSB300_EPSET1_INTERVAL(info.interval); + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); +} + +static void fusb300_set_bwnum(struct fusb300 *fusb300, + struct fusb300_ep_info info) +{ + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); + + reg &= ~FUSB300_EPSET1_BWNUM(0x3); + reg |= FUSB300_EPSET1_BWNUM(info.bw_num); + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum)); +} + +static void set_ep_reg(struct fusb300 *fusb300, + struct fusb300_ep_info info) +{ + fusb300_set_eptype(fusb300, info); + fusb300_set_epdir(fusb300, info); + fusb300_set_epmps(fusb300, info); + + if (info.interval) + fusb300_set_interval(fusb300, info); + + if (info.bw_num) + fusb300_set_bwnum(fusb300, info); + + fusb300_set_ep_active(fusb300, info.epnum); +} + +static int config_ep(struct fusb300_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + struct fusb300 *fusb300 = ep->fusb300; + struct fusb300_ep_info info; + + ep->desc = desc; + + info.interval = 0; + info.addrofs = 0; + info.bw_num = 0; + + info.type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + info.dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0; + info.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; + + if ((info.type == USB_ENDPOINT_XFER_INT) || + (info.type == USB_ENDPOINT_XFER_ISOC)) { + info.interval = desc->bInterval; + if (info.type == USB_ENDPOINT_XFER_ISOC) + info.bw_num = ((desc->wMaxPacketSize & 0x1800) >> 11); + } + + ep_fifo_setting(fusb300, info); + + set_ep_reg(fusb300, info); + + fusb300_ep_setting(ep, info); + + fusb300->ep[info.epnum] = ep; + + return 0; +} + +static int fusb300_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct fusb300_ep *ep; + + ep = container_of(_ep, struct fusb300_ep, ep); + + if (ep->fusb300->reenum) { + ep->fusb300->fifo_entry_num = 0; + ep->fusb300->addrofs = 0; + ep->fusb300->reenum = 0; + } + + return config_ep(ep, desc); +} + +static int fusb300_disable(struct usb_ep *_ep) +{ + struct fusb300_ep *ep; + struct fusb300_request *req; + unsigned long flags; + + ep = container_of(_ep, struct fusb300_ep, ep); + + BUG_ON(!ep); + + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct fusb300_request, queue); + spin_lock_irqsave(&ep->fusb300->lock, flags); + done(ep, req, -ECONNRESET); + spin_unlock_irqrestore(&ep->fusb300->lock, flags); + } + + return fusb300_ep_release(ep); +} + +static struct usb_request *fusb300_alloc_request(struct usb_ep *_ep, + gfp_t gfp_flags) +{ + struct fusb300_request *req; + + req = kzalloc(sizeof(struct fusb300_request), gfp_flags); + if (!req) + return NULL; + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +static void fusb300_free_request(struct usb_ep *_ep, struct usb_request *_req) +{ + struct fusb300_request *req; + + req = container_of(_req, struct fusb300_request, req); + kfree(req); +} + +static int enable_fifo_int(struct fusb300_ep *ep) +{ + struct fusb300 *fusb300 = ep->fusb300; + + if (ep->epnum) { + fusb300_enable_bit(fusb300, FUSB300_OFFSET_IGER0, + FUSB300_IGER0_EEPn_FIFO_INT(ep->epnum)); + } else { + pr_err("can't enable_fifo_int ep0\n"); + return -EINVAL; + } + + return 0; +} + +static int disable_fifo_int(struct fusb300_ep *ep) +{ + struct fusb300 *fusb300 = ep->fusb300; + + if (ep->epnum) { + fusb300_disable_bit(fusb300, FUSB300_OFFSET_IGER0, + FUSB300_IGER0_EEPn_FIFO_INT(ep->epnum)); + } else { + pr_err("can't disable_fifo_int ep0\n"); + return -EINVAL; + } + + return 0; +} + +static void fusb300_set_cxlen(struct fusb300 *fusb300, u32 length) +{ + u32 reg; + + reg = ioread32(fusb300->reg + FUSB300_OFFSET_CSR); + reg &= ~FUSB300_CSR_LEN_MSK; + reg |= FUSB300_CSR_LEN(length); + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_CSR); +} + +/* write data to cx fifo */ +static void fusb300_wrcxf(struct fusb300_ep *ep, + struct fusb300_request *req) +{ + int i = 0; + u8 *tmp; + u32 data; + struct fusb300 *fusb300 = ep->fusb300; + u32 length = req->req.length - req->req.actual; + + tmp = req->req.buf + req->req.actual; + + if (length > SS_CTL_MAX_PACKET_SIZE) { + fusb300_set_cxlen(fusb300, SS_CTL_MAX_PACKET_SIZE); + for (i = (SS_CTL_MAX_PACKET_SIZE >> 2); i > 0; i--) { + data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16 | + *(tmp + 3) << 24; + iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT); + tmp += 4; + } + req->req.actual += SS_CTL_MAX_PACKET_SIZE; + } else { /* length is less than max packet size */ + fusb300_set_cxlen(fusb300, length); + for (i = length >> 2; i > 0; i--) { + data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16 | + *(tmp + 3) << 24; + printk(KERN_DEBUG " 0x%x\n", data); + iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT); + tmp = tmp + 4; + } + switch (length % 4) { + case 1: + data = *tmp; + printk(KERN_DEBUG " 0x%x\n", data); + iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT); + break; + case 2: + data = *tmp | *(tmp + 1) << 8; + printk(KERN_DEBUG " 0x%x\n", data); + iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT); + break; + case 3: + data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16; + printk(KERN_DEBUG " 0x%x\n", data); + iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT); + break; + default: + break; + } + req->req.actual += length; + } +} + +static void fusb300_set_epnstall(struct fusb300 *fusb300, u8 ep) +{ + fusb300_enable_bit(fusb300, FUSB300_OFFSET_EPSET0(ep), + FUSB300_EPSET0_STL); +} + +static void fusb300_clear_epnstall(struct fusb300 *fusb300, u8 ep) +{ + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET0(ep)); + + if (reg & FUSB300_EPSET0_STL) { + printk(KERN_DEBUG "EP%d stall... Clear!!\n", ep); + reg &= ~FUSB300_EPSET0_STL; + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET0(ep)); + } +} + +static void ep0_queue(struct fusb300_ep *ep, struct fusb300_request *req) +{ + if (ep->fusb300->ep0_dir) { /* if IN */ + if (req->req.length) { + fusb300_wrcxf(ep, req); + } else + printk(KERN_DEBUG "%s : req->req.length = 0x%x\n", + __func__, req->req.length); + if ((req->req.length == req->req.actual) || + (req->req.actual < ep->ep.maxpacket)) + done(ep, req, 0); + } else { /* OUT */ + if (!req->req.length) + done(ep, req, 0); + else + fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_IGER1, + FUSB300_IGER1_CX_OUT_INT); + } +} + +static int fusb300_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t gfp_flags) +{ + struct fusb300_ep *ep; + struct fusb300_request *req; + unsigned long flags; + int request = 0; + + ep = container_of(_ep, struct fusb300_ep, ep); + req = container_of(_req, struct fusb300_request, req); + + if (ep->fusb300->gadget.speed == USB_SPEED_UNKNOWN) + return -ESHUTDOWN; + + spin_lock_irqsave(&ep->fusb300->lock, flags); + + if (list_empty(&ep->queue)) + request = 1; + + list_add_tail(&req->queue, &ep->queue); + + req->req.actual = 0; + req->req.status = -EINPROGRESS; + + if (ep->desc == NULL) /* ep0 */ + ep0_queue(ep, req); + else if (request && !ep->stall) + enable_fifo_int(ep); + + spin_unlock_irqrestore(&ep->fusb300->lock, flags); + + return 0; +} + +static int fusb300_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct fusb300_ep *ep; + struct fusb300_request *req; + unsigned long flags; + + ep = container_of(_ep, struct fusb300_ep, ep); + req = container_of(_req, struct fusb300_request, req); + + spin_lock_irqsave(&ep->fusb300->lock, flags); + if (!list_empty(&ep->queue)) + done(ep, req, -ECONNRESET); + spin_unlock_irqrestore(&ep->fusb300->lock, flags); + + return 0; +} + +static int fusb300_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedge) +{ + struct fusb300_ep *ep; + struct fusb300 *fusb300; + unsigned long flags; + int ret = 0; + + ep = container_of(_ep, struct fusb300_ep, ep); + + fusb300 = ep->fusb300; + + spin_lock_irqsave(&ep->fusb300->lock, flags); + + if (!list_empty(&ep->queue)) { + ret = -EAGAIN; + goto out; + } + + if (value) { + fusb300_set_epnstall(fusb300, ep->epnum); + ep->stall = 1; + if (wedge) + ep->wedged = 1; + } else { + fusb300_clear_epnstall(fusb300, ep->epnum); + ep->stall = 0; + ep->wedged = 0; + } + +out: + spin_unlock_irqrestore(&ep->fusb300->lock, flags); + return ret; +} + +static int fusb300_set_halt(struct usb_ep *_ep, int value) +{ + return fusb300_set_halt_and_wedge(_ep, value, 0); +} + +static int fusb300_set_wedge(struct usb_ep *_ep) +{ + return fusb300_set_halt_and_wedge(_ep, 1, 1); +} + +static void fusb300_fifo_flush(struct usb_ep *_ep) +{ +} + +static struct usb_ep_ops fusb300_ep_ops = { + .enable = fusb300_enable, + .disable = fusb300_disable, + + .alloc_request = fusb300_alloc_request, + .free_request = fusb300_free_request, + + .queue = fusb300_queue, + .dequeue = fusb300_dequeue, + + .set_halt = fusb300_set_halt, + .fifo_flush = fusb300_fifo_flush, + .set_wedge = fusb300_set_wedge, +}; + +/*****************************************************************************/ +static void fusb300_clear_int(struct fusb300 *fusb300, u32 offset, + u32 value) +{ + iowrite32(value, fusb300->reg + offset); +} + +static void fusb300_reset(void) +{ +} + +static void fusb300_set_cxstall(struct fusb300 *fusb300) +{ + fusb300_enable_bit(fusb300, FUSB300_OFFSET_CSR, + FUSB300_CSR_STL); +} + +static void fusb300_set_cxdone(struct fusb300 *fusb300) +{ + fusb300_enable_bit(fusb300, FUSB300_OFFSET_CSR, + FUSB300_CSR_DONE); +} + +/* read data from cx fifo */ +void fusb300_rdcxf(struct fusb300 *fusb300, + u8 *buffer, u32 length) +{ + int i = 0; + u8 *tmp; + u32 data; + + tmp = buffer; + + for (i = (length >> 2); i > 0; i--) { + data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT); + printk(KERN_DEBUG " 0x%x\n", data); + *tmp = data & 0xFF; + *(tmp + 1) = (data >> 8) & 0xFF; + *(tmp + 2) = (data >> 16) & 0xFF; + *(tmp + 3) = (data >> 24) & 0xFF; + tmp = tmp + 4; + } + + switch (length % 4) { + case 1: + data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT); + printk(KERN_DEBUG " 0x%x\n", data); + *tmp = data & 0xFF; + break; + case 2: + data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT); + printk(KERN_DEBUG " 0x%x\n", data); + *tmp = data & 0xFF; + *(tmp + 1) = (data >> 8) & 0xFF; + break; + case 3: + data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT); + printk(KERN_DEBUG " 0x%x\n", data); + *tmp = data & 0xFF; + *(tmp + 1) = (data >> 8) & 0xFF; + *(tmp + 2) = (data >> 16) & 0xFF; + break; + default: + break; + } +} + +#if 0 +static void fusb300_dbg_fifo(struct fusb300_ep *ep, + u8 entry, u16 length) +{ + u32 reg; + u32 i = 0; + u32 j = 0; + + reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_GTM); + reg &= ~(FUSB300_GTM_TST_EP_ENTRY(0xF) | + FUSB300_GTM_TST_EP_NUM(0xF) | FUSB300_GTM_TST_FIFO_DEG); + reg |= (FUSB300_GTM_TST_EP_ENTRY(entry) | + FUSB300_GTM_TST_EP_NUM(ep->epnum) | FUSB300_GTM_TST_FIFO_DEG); + iowrite32(reg, ep->fusb300->reg + FUSB300_OFFSET_GTM); + + for (i = 0; i < (length >> 2); i++) { + if (i * 4 == 1024) + break; + reg = ioread32(ep->fusb300->reg + + FUSB300_OFFSET_BUFDBG_START + i * 4); + printk(KERN_DEBUG" 0x%-8x", reg); + j++; + if ((j % 4) == 0) + printk(KERN_DEBUG "\n"); + } + + if (length % 4) { + reg = ioread32(ep->fusb300->reg + + FUSB300_OFFSET_BUFDBG_START + i * 4); + printk(KERN_DEBUG " 0x%x\n", reg); + } + + if ((j % 4) != 0) + printk(KERN_DEBUG "\n"); + + fusb300_disable_bit(ep->fusb300, FUSB300_OFFSET_GTM, + FUSB300_GTM_TST_FIFO_DEG); +} + +static void fusb300_cmp_dbg_fifo(struct fusb300_ep *ep, + u8 entry, u16 length, u8 *golden) +{ + u32 reg; + u32 i = 0; + u32 golden_value; + u8 *tmp; + + tmp = golden; + + printk(KERN_DEBUG "fusb300_cmp_dbg_fifo (entry %d) : start\n", entry); + + reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_GTM); + reg &= ~(FUSB300_GTM_TST_EP_ENTRY(0xF) | + FUSB300_GTM_TST_EP_NUM(0xF) | FUSB300_GTM_TST_FIFO_DEG); + reg |= (FUSB300_GTM_TST_EP_ENTRY(entry) | + FUSB300_GTM_TST_EP_NUM(ep->epnum) | FUSB300_GTM_TST_FIFO_DEG); + iowrite32(reg, ep->fusb300->reg + FUSB300_OFFSET_GTM); + + for (i = 0; i < (length >> 2); i++) { + if (i * 4 == 1024) + break; + golden_value = *tmp | *(tmp + 1) << 8 | + *(tmp + 2) << 16 | *(tmp + 3) << 24; + + reg = ioread32(ep->fusb300->reg + + FUSB300_OFFSET_BUFDBG_START + i*4); + + if (reg != golden_value) { + printk(KERN_DEBUG "0x%x : ", (u32)(ep->fusb300->reg + + FUSB300_OFFSET_BUFDBG_START + i*4)); + printk(KERN_DEBUG " golden = 0x%x, reg = 0x%x\n", + golden_value, reg); + } + tmp += 4; + } + + switch (length % 4) { + case 1: + golden_value = *tmp; + case 2: + golden_value = *tmp | *(tmp + 1) << 8; + case 3: + golden_value = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16; + default: + break; + + reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_BUFDBG_START + i*4); + if (reg != golden_value) { + printk(KERN_DEBUG "0x%x:", (u32)(ep->fusb300->reg + + FUSB300_OFFSET_BUFDBG_START + i*4)); + printk(KERN_DEBUG " golden = 0x%x, reg = 0x%x\n", + golden_value, reg); + } + } + + printk(KERN_DEBUG "fusb300_cmp_dbg_fifo : end\n"); + fusb300_disable_bit(ep->fusb300, FUSB300_OFFSET_GTM, + FUSB300_GTM_TST_FIFO_DEG); +} +#endif + +static void fusb300_rdfifo(struct fusb300_ep *ep, + struct fusb300_request *req, + u32 length) +{ + int i = 0; + u8 *tmp; + u32 data, reg; + struct fusb300 *fusb300 = ep->fusb300; + + tmp = req->req.buf + req->req.actual; + req->req.actual += length; + + if (req->req.actual > req->req.length) + printk(KERN_DEBUG "req->req.actual > req->req.length\n"); + + for (i = (length >> 2); i > 0; i--) { + data = ioread32(fusb300->reg + + FUSB300_OFFSET_EPPORT(ep->epnum)); + *tmp = data & 0xFF; + *(tmp + 1) = (data >> 8) & 0xFF; + *(tmp + 2) = (data >> 16) & 0xFF; + *(tmp + 3) = (data >> 24) & 0xFF; + tmp = tmp + 4; + } + + switch (length % 4) { + case 1: + data = ioread32(fusb300->reg + + FUSB300_OFFSET_EPPORT(ep->epnum)); + *tmp = data & 0xFF; + break; + case 2: + data = ioread32(fusb300->reg + + FUSB300_OFFSET_EPPORT(ep->epnum)); + *tmp = data & 0xFF; + *(tmp + 1) = (data >> 8) & 0xFF; + break; + case 3: + data = ioread32(fusb300->reg + + FUSB300_OFFSET_EPPORT(ep->epnum)); + *tmp = data & 0xFF; + *(tmp + 1) = (data >> 8) & 0xFF; + *(tmp + 2) = (data >> 16) & 0xFF; + break; + default: + break; + } + + do { + reg = ioread32(fusb300->reg + FUSB300_OFFSET_IGR1); + reg &= FUSB300_IGR1_SYNF0_EMPTY_INT; + if (i) + printk(KERN_INFO "sync fifo is not empty!\n"); + i++; + } while (!reg); +} + +/* write data to fifo */ +static void fusb300_wrfifo(struct fusb300_ep *ep, + struct fusb300_request *req) +{ + int i = 0; + u8 *tmp; + u32 data, reg; + struct fusb300 *fusb300 = ep->fusb300; + + tmp = req->req.buf; + req->req.actual = req->req.length; + + for (i = (req->req.length >> 2); i > 0; i--) { + data = *tmp | *(tmp + 1) << 8 | + *(tmp + 2) << 16 | *(tmp + 3) << 24; + + iowrite32(data, fusb300->reg + + FUSB300_OFFSET_EPPORT(ep->epnum)); + tmp += 4; + } + + switch (req->req.length % 4) { + case 1: + data = *tmp; + iowrite32(data, fusb300->reg + + FUSB300_OFFSET_EPPORT(ep->epnum)); + break; + case 2: + data = *tmp | *(tmp + 1) << 8; + iowrite32(data, fusb300->reg + + FUSB300_OFFSET_EPPORT(ep->epnum)); + break; + case 3: + data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16; + iowrite32(data, fusb300->reg + + FUSB300_OFFSET_EPPORT(ep->epnum)); + break; + default: + break; + } + + do { + reg = ioread32(fusb300->reg + FUSB300_OFFSET_IGR1); + reg &= FUSB300_IGR1_SYNF0_EMPTY_INT; + if (i) + printk(KERN_INFO"sync fifo is not empty!\n"); + i++; + } while (!reg); +} + +static u8 fusb300_get_epnstall(struct fusb300 *fusb300, u8 ep) +{ + u8 value; + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET0(ep)); + + value = reg & FUSB300_EPSET0_STL; + + return value; +} + +static u8 fusb300_get_cxstall(struct fusb300 *fusb300) +{ + u8 value; + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_CSR); + + value = (reg & FUSB300_CSR_STL) >> 1; + + return value; +} + +static void request_error(struct fusb300 *fusb300) +{ + fusb300_set_cxstall(fusb300); + printk(KERN_DEBUG "request error!!\n"); +} + +static void get_status(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl) +__releases(fusb300->lock) +__acquires(fusb300->lock) +{ + u8 ep; + u16 status = 0; + u16 w_index = ctrl->wIndex; + + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + status = 1 << USB_DEVICE_SELF_POWERED; + break; + case USB_RECIP_INTERFACE: + status = 0; + break; + case USB_RECIP_ENDPOINT: + ep = w_index & USB_ENDPOINT_NUMBER_MASK; + if (ep) { + if (fusb300_get_epnstall(fusb300, ep)) + status = 1 << USB_ENDPOINT_HALT; + } else { + if (fusb300_get_cxstall(fusb300)) + status = 0; + } + break; + + default: + request_error(fusb300); + return; /* exit */ + } + + fusb300->ep0_data = cpu_to_le16(status); + fusb300->ep0_req->buf = &fusb300->ep0_data; + fusb300->ep0_req->length = 2; + + spin_unlock(&fusb300->lock); + fusb300_queue(fusb300->gadget.ep0, fusb300->ep0_req, GFP_KERNEL); + spin_lock(&fusb300->lock); +} + +static void set_feature(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl) +{ + u8 ep; + + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + fusb300_set_cxdone(fusb300); + break; + case USB_RECIP_INTERFACE: + fusb300_set_cxdone(fusb300); + break; + case USB_RECIP_ENDPOINT: { + u16 w_index = le16_to_cpu(ctrl->wIndex); + + ep = w_index & USB_ENDPOINT_NUMBER_MASK; + if (ep) + fusb300_set_epnstall(fusb300, ep); + else + fusb300_set_cxstall(fusb300); + fusb300_set_cxdone(fusb300); + } + break; + default: + request_error(fusb300); + break; + } +} + +static void fusb300_clear_seqnum(struct fusb300 *fusb300, u8 ep) +{ + fusb300_enable_bit(fusb300, FUSB300_OFFSET_EPSET0(ep), + FUSB300_EPSET0_CLRSEQNUM); +} + +static void clear_feature(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl) +{ + struct fusb300_ep *ep = + fusb300->ep[ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK]; + + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + fusb300_set_cxdone(fusb300); + break; + case USB_RECIP_INTERFACE: + fusb300_set_cxdone(fusb300); + break; + case USB_RECIP_ENDPOINT: + if (ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK) { + if (ep->wedged) { + fusb300_set_cxdone(fusb300); + break; + } + if (ep->stall) { + ep->stall = 0; + fusb300_clear_seqnum(fusb300, ep->epnum); + fusb300_clear_epnstall(fusb300, ep->epnum); + if (!list_empty(&ep->queue)) + enable_fifo_int(ep); + } + } + fusb300_set_cxdone(fusb300); + break; + default: + request_error(fusb300); + break; + } +} + +static void fusb300_set_dev_addr(struct fusb300 *fusb300, u16 addr) +{ + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_DAR); + + reg &= ~FUSB300_DAR_DRVADDR_MSK; + reg |= FUSB300_DAR_DRVADDR(addr); + + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_DAR); +} + +static void set_address(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl) +{ + if (ctrl->wValue >= 0x0100) + request_error(fusb300); + else { + fusb300_set_dev_addr(fusb300, ctrl->wValue); + fusb300_set_cxdone(fusb300); + } +} + +#define UVC_COPY_DESCRIPTORS(mem, src) \ + do { \ + const struct usb_descriptor_header * const *__src; \ + for (__src = src; *__src; ++__src) { \ + memcpy(mem, *__src, (*__src)->bLength); \ + mem += (*__src)->bLength; \ + } \ + } while (0) + +static void fusb300_ep0_complete(struct usb_ep *ep, + struct usb_request *req) +{ +} + +static int setup_packet(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl) +{ + u8 *p = (u8 *)ctrl; + u8 ret = 0; + u8 i = 0; + + fusb300_rdcxf(fusb300, p, 8); + fusb300->ep0_dir = ctrl->bRequestType & USB_DIR_IN; + fusb300->ep0_length = ctrl->wLength; + + /* check request */ + if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { + switch (ctrl->bRequest) { + case USB_REQ_GET_STATUS: + get_status(fusb300, ctrl); + break; + case USB_REQ_CLEAR_FEATURE: + clear_feature(fusb300, ctrl); + break; + case USB_REQ_SET_FEATURE: + set_feature(fusb300, ctrl); + break; + case USB_REQ_SET_ADDRESS: + set_address(fusb300, ctrl); + break; + case USB_REQ_SET_CONFIGURATION: + fusb300_enable_bit(fusb300, FUSB300_OFFSET_DAR, + FUSB300_DAR_SETCONFG); + /* clear sequence number */ + for (i = 1; i <= FUSB300_MAX_NUM_EP; i++) + fusb300_clear_seqnum(fusb300, i); + fusb300->reenum = 1; + ret = 1; + break; + default: + ret = 1; + break; + } + } else + ret = 1; + + return ret; +} + +static void fusb300_set_ep_bycnt(struct fusb300_ep *ep, u32 bycnt) +{ + struct fusb300 *fusb300 = ep->fusb300; + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPFFR(ep->epnum)); + + reg &= ~FUSB300_FFR_BYCNT; + reg |= bycnt & FUSB300_FFR_BYCNT; + + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPFFR(ep->epnum)); +} + +static void done(struct fusb300_ep *ep, struct fusb300_request *req, + int status) +{ + list_del_init(&req->queue); + + /* don't modify queue heads during completion callback */ + if (ep->fusb300->gadget.speed == USB_SPEED_UNKNOWN) + req->req.status = -ESHUTDOWN; + else + req->req.status = status; + + spin_unlock(&ep->fusb300->lock); + req->req.complete(&ep->ep, &req->req); + spin_lock(&ep->fusb300->lock); + + if (ep->epnum) { + disable_fifo_int(ep); + if (!list_empty(&ep->queue)) + enable_fifo_int(ep); + } else + fusb300_set_cxdone(ep->fusb300); +} + +void fusb300_fill_idma_prdtbl(struct fusb300_ep *ep, + struct fusb300_request *req) +{ + u32 value; + u32 reg; + + /* wait SW owner */ + do { + reg = ioread32(ep->fusb300->reg + + FUSB300_OFFSET_EPPRD_W0(ep->epnum)); + reg &= FUSB300_EPPRD0_H; + } while (reg); + + iowrite32((u32) req->req.buf, ep->fusb300->reg + + FUSB300_OFFSET_EPPRD_W1(ep->epnum)); + + value = FUSB300_EPPRD0_BTC(req->req.length) | FUSB300_EPPRD0_H | + FUSB300_EPPRD0_F | FUSB300_EPPRD0_L | FUSB300_EPPRD0_I; + iowrite32(value, ep->fusb300->reg + FUSB300_OFFSET_EPPRD_W0(ep->epnum)); + + iowrite32(0x0, ep->fusb300->reg + FUSB300_OFFSET_EPPRD_W2(ep->epnum)); + + fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_EPPRDRDY, + FUSB300_EPPRDR_EP_PRD_RDY(ep->epnum)); +} + +static void fusb300_wait_idma_finished(struct fusb300_ep *ep) +{ + u32 reg; + + do { + reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_IGR1); + if ((reg & FUSB300_IGR1_VBUS_CHG_INT) || + (reg & FUSB300_IGR1_WARM_RST_INT) || + (reg & FUSB300_IGR1_HOT_RST_INT) || + (reg & FUSB300_IGR1_USBRST_INT) + ) + goto IDMA_RESET; + reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_IGR0); + reg &= FUSB300_IGR0_EPn_PRD_INT(ep->epnum); + } while (!reg); + + fusb300_clear_int(ep->fusb300, FUSB300_OFFSET_IGR0, + FUSB300_IGR0_EPn_PRD_INT(ep->epnum)); +IDMA_RESET: + fusb300_clear_int(ep->fusb300, FUSB300_OFFSET_IGER0, + FUSB300_IGER0_EEPn_PRD_INT(ep->epnum)); +} + +static void fusb300_set_idma(struct fusb300_ep *ep, + struct fusb300_request *req) +{ + dma_addr_t d; + u8 *tmp = NULL; + + d = dma_map_single(NULL, req->req.buf, req->req.length, DMA_TO_DEVICE); + + if (dma_mapping_error(NULL, d)) { + kfree(req->req.buf); + printk(KERN_DEBUG "dma_mapping_error\n"); + } + + dma_sync_single_for_device(NULL, d, req->req.length, DMA_TO_DEVICE); + + fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_IGER0, + FUSB300_IGER0_EEPn_PRD_INT(ep->epnum)); + + tmp = req->req.buf; + req->req.buf = (u8 *)d; + + fusb300_fill_idma_prdtbl(ep, req); + /* check idma is done */ + fusb300_wait_idma_finished(ep); + + req->req.buf = tmp; + + if (d) + dma_unmap_single(NULL, d, req->req.length, DMA_TO_DEVICE); +} + +static void in_ep_fifo_handler(struct fusb300_ep *ep) +{ + struct fusb300_request *req = list_entry(ep->queue.next, + struct fusb300_request, queue); + + if (req->req.length) { +#if 0 + fusb300_set_ep_bycnt(ep, req->req.length); + fusb300_wrfifo(ep, req); +#else + fusb300_set_idma(ep, req); +#endif + } + done(ep, req, 0); +} + +static void out_ep_fifo_handler(struct fusb300_ep *ep) +{ + struct fusb300 *fusb300 = ep->fusb300; + struct fusb300_request *req = list_entry(ep->queue.next, + struct fusb300_request, queue); + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPFFR(ep->epnum)); + u32 length = reg & FUSB300_FFR_BYCNT; + + fusb300_rdfifo(ep, req, length); + + /* finish out transfer */ + if ((req->req.length == req->req.actual) || (length < ep->ep.maxpacket)) + done(ep, req, 0); +} + +static void check_device_mode(struct fusb300 *fusb300) +{ + u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_GCR); + + switch (reg & FUSB300_GCR_DEVEN_MSK) { + case FUSB300_GCR_DEVEN_SS: + fusb300->gadget.speed = USB_SPEED_SUPER; + break; + case FUSB300_GCR_DEVEN_HS: + fusb300->gadget.speed = USB_SPEED_HIGH; + break; + case FUSB300_GCR_DEVEN_FS: + fusb300->gadget.speed = USB_SPEED_FULL; + break; + default: + fusb300->gadget.speed = USB_SPEED_UNKNOWN; + break; + } + printk(KERN_INFO "dev_mode = %d\n", (reg & FUSB300_GCR_DEVEN_MSK)); +} + + +static void fusb300_ep0out(struct fusb300 *fusb300) +{ + struct fusb300_ep *ep = fusb300->ep[0]; + u32 reg; + + if (!list_empty(&ep->queue)) { + struct fusb300_request *req; + + req = list_first_entry(&ep->queue, + struct fusb300_request, queue); + if (req->req.length) + fusb300_rdcxf(ep->fusb300, req->req.buf, + req->req.length); + done(ep, req, 0); + reg = ioread32(fusb300->reg + FUSB300_OFFSET_IGER1); + reg &= ~FUSB300_IGER1_CX_OUT_INT; + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_IGER1); + } else + pr_err("%s : empty queue\n", __func__); +} + +static void fusb300_ep0in(struct fusb300 *fusb300) +{ + struct fusb300_request *req; + struct fusb300_ep *ep = fusb300->ep[0]; + + if ((!list_empty(&ep->queue)) && (fusb300->ep0_dir)) { + req = list_entry(ep->queue.next, + struct fusb300_request, queue); + if (req->req.length) + fusb300_wrcxf(ep, req); + if ((req->req.length - req->req.actual) < ep->ep.maxpacket) + done(ep, req, 0); + } else + fusb300_set_cxdone(fusb300); +} + +static void fusb300_grp2_handler(void) +{ +} + +static void fusb300_grp3_handler(void) +{ +} + +static void fusb300_grp4_handler(void) +{ +} + +static void fusb300_grp5_handler(void) +{ +} + +static irqreturn_t fusb300_irq(int irq, void *_fusb300) +{ + struct fusb300 *fusb300 = _fusb300; + u32 int_grp1 = ioread32(fusb300->reg + FUSB300_OFFSET_IGR1); + u32 int_grp1_en = ioread32(fusb300->reg + FUSB300_OFFSET_IGER1); + u32 int_grp0 = ioread32(fusb300->reg + FUSB300_OFFSET_IGR0); + u32 int_grp0_en = ioread32(fusb300->reg + FUSB300_OFFSET_IGER0); + struct usb_ctrlrequest ctrl; + u8 in; + u32 reg; + int i; + + spin_lock(&fusb300->lock); + + int_grp1 &= int_grp1_en; + int_grp0 &= int_grp0_en; + + if (int_grp1 & FUSB300_IGR1_WARM_RST_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_WARM_RST_INT); + printk(KERN_INFO"fusb300_warmreset\n"); + fusb300_reset(); + } + + if (int_grp1 & FUSB300_IGR1_HOT_RST_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_HOT_RST_INT); + printk(KERN_INFO"fusb300_hotreset\n"); + fusb300_reset(); + } + + if (int_grp1 & FUSB300_IGR1_USBRST_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_USBRST_INT); + fusb300_reset(); + } + /* COMABT_INT has a highest priority */ + + if (int_grp1 & FUSB300_IGR1_CX_COMABT_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_CX_COMABT_INT); + printk(KERN_INFO"fusb300_ep0abt\n"); + } + + if (int_grp1 & FUSB300_IGR1_VBUS_CHG_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_VBUS_CHG_INT); + printk(KERN_INFO"fusb300_vbus_change\n"); + } + + if (int_grp1 & FUSB300_IGR1_U3_EXIT_FAIL_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_U3_EXIT_FAIL_INT); + } + + if (int_grp1 & FUSB300_IGR1_U2_EXIT_FAIL_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_U2_EXIT_FAIL_INT); + } + + if (int_grp1 & FUSB300_IGR1_U1_EXIT_FAIL_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_U1_EXIT_FAIL_INT); + } + + if (int_grp1 & FUSB300_IGR1_U2_ENTRY_FAIL_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_U2_ENTRY_FAIL_INT); + } + + if (int_grp1 & FUSB300_IGR1_U1_ENTRY_FAIL_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_U1_ENTRY_FAIL_INT); + } + + if (int_grp1 & FUSB300_IGR1_U3_EXIT_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_U3_EXIT_INT); + printk(KERN_INFO "FUSB300_IGR1_U3_EXIT_INT\n"); + } + + if (int_grp1 & FUSB300_IGR1_U2_EXIT_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_U2_EXIT_INT); + printk(KERN_INFO "FUSB300_IGR1_U2_EXIT_INT\n"); + } + + if (int_grp1 & FUSB300_IGR1_U1_EXIT_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_U1_EXIT_INT); + printk(KERN_INFO "FUSB300_IGR1_U1_EXIT_INT\n"); + } + + if (int_grp1 & FUSB300_IGR1_U3_ENTRY_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_U3_ENTRY_INT); + printk(KERN_INFO "FUSB300_IGR1_U3_ENTRY_INT\n"); + fusb300_enable_bit(fusb300, FUSB300_OFFSET_SSCR1, + FUSB300_SSCR1_GO_U3_DONE); + } + + if (int_grp1 & FUSB300_IGR1_U2_ENTRY_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_U2_ENTRY_INT); + printk(KERN_INFO "FUSB300_IGR1_U2_ENTRY_INT\n"); + } + + if (int_grp1 & FUSB300_IGR1_U1_ENTRY_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_U1_ENTRY_INT); + printk(KERN_INFO "FUSB300_IGR1_U1_ENTRY_INT\n"); + } + + if (int_grp1 & FUSB300_IGR1_RESM_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_RESM_INT); + printk(KERN_INFO "fusb300_resume\n"); + } + + if (int_grp1 & FUSB300_IGR1_SUSP_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_SUSP_INT); + printk(KERN_INFO "fusb300_suspend\n"); + } + + if (int_grp1 & FUSB300_IGR1_HS_LPM_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_HS_LPM_INT); + printk(KERN_INFO "fusb300_HS_LPM_INT\n"); + } + + if (int_grp1 & FUSB300_IGR1_DEV_MODE_CHG_INT) { + fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1, + FUSB300_IGR1_DEV_MODE_CHG_INT); + check_device_mode(fusb300); + } + + if (int_grp1 & FUSB300_IGR1_CX_COMFAIL_INT) { + fusb300_set_cxstall(fusb300); + printk(KERN_INFO "fusb300_ep0fail\n"); + } + + if (int_grp1 & FUSB300_IGR1_CX_SETUP_INT) { + printk(KERN_INFO "fusb300_ep0setup\n"); + if (setup_packet(fusb300, &ctrl)) { + spin_unlock(&fusb300->lock); + if (fusb300->driver->setup(&fusb300->gadget, &ctrl) < 0) + fusb300_set_cxstall(fusb300); + spin_lock(&fusb300->lock); + } + } + + if (int_grp1 & FUSB300_IGR1_CX_CMDEND_INT) + printk(KERN_INFO "fusb300_cmdend\n"); + + + if (int_grp1 & FUSB300_IGR1_CX_OUT_INT) { + printk(KERN_INFO "fusb300_cxout\n"); + fusb300_ep0out(fusb300); + } + + if (int_grp1 & FUSB300_IGR1_CX_IN_INT) { + printk(KERN_INFO "fusb300_cxin\n"); + fusb300_ep0in(fusb300); + } + + if (int_grp1 & FUSB300_IGR1_INTGRP5) + fusb300_grp5_handler(); + + if (int_grp1 & FUSB300_IGR1_INTGRP4) + fusb300_grp4_handler(); + + if (int_grp1 & FUSB300_IGR1_INTGRP3) + fusb300_grp3_handler(); + + if (int_grp1 & FUSB300_IGR1_INTGRP2) + fusb300_grp2_handler(); + + if (int_grp0) { + for (i = 1; i < FUSB300_MAX_NUM_EP; i++) { + if (int_grp0 & FUSB300_IGR0_EPn_FIFO_INT(i)) { + reg = ioread32(fusb300->reg + + FUSB300_OFFSET_EPSET1(i)); + in = (reg & FUSB300_EPSET1_DIRIN) ? 1 : 0; + if (in) + in_ep_fifo_handler(fusb300->ep[i]); + else + out_ep_fifo_handler(fusb300->ep[i]); + } + } + } + + spin_unlock(&fusb300->lock); + + return IRQ_HANDLED; +} + +static void fusb300_set_u2_timeout(struct fusb300 *fusb300, + u32 time) +{ + u32 reg; + + reg = ioread32(fusb300->reg + FUSB300_OFFSET_TT); + reg &= ~0xff; + reg |= FUSB300_SSCR2_U2TIMEOUT(time); + + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_TT); +} + +static void fusb300_set_u1_timeout(struct fusb300 *fusb300, + u32 time) +{ + u32 reg; + + reg = ioread32(fusb300->reg + FUSB300_OFFSET_TT); + reg &= ~(0xff << 8); + reg |= FUSB300_SSCR2_U1TIMEOUT(time); + + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_TT); +} + +static void init_controller(struct fusb300 *fusb300) +{ + u32 reg; + u32 mask = 0; + u32 val = 0; + + /* split on */ + mask = val = FUSB300_AHBBCR_S0_SPLIT_ON | FUSB300_AHBBCR_S1_SPLIT_ON; + reg = ioread32(fusb300->reg + FUSB300_OFFSET_AHBCR); + reg &= ~mask; + reg |= val; + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_AHBCR); + + /* enable high-speed LPM */ + mask = val = FUSB300_HSCR_HS_LPM_PERMIT; + reg = ioread32(fusb300->reg + FUSB300_OFFSET_HSCR); + reg &= ~mask; + reg |= val; + iowrite32(reg, fusb300->reg + FUSB300_OFFSET_HSCR); + + /*set u1 u2 timmer*/ + fusb300_set_u2_timeout(fusb300, 0xff); + fusb300_set_u1_timeout(fusb300, 0xff); + + /* enable all grp1 interrupt */ + iowrite32(0xcfffff9f, fusb300->reg + FUSB300_OFFSET_IGER1); +} +/*------------------------------------------------------------------------*/ +static struct fusb300 *the_controller; + +int usb_gadget_probe_driver(struct usb_gadget_driver *driver, + int (*bind)(struct usb_gadget *)) +{ + struct fusb300 *fusb300 = the_controller; + int retval; + + if (!driver + || driver->speed < USB_SPEED_FULL + || !bind + || !driver->setup) + return -EINVAL; + + if (!fusb300) + return -ENODEV; + + if (fusb300->driver) + return -EBUSY; + + /* hook up the driver */ + driver->driver.bus = NULL; + fusb300->driver = driver; + fusb300->gadget.dev.driver = &driver->driver; + + retval = device_add(&fusb300->gadget.dev); + if (retval) { + pr_err("device_add error (%d)\n", retval); + goto error; + } + + retval = bind(&fusb300->gadget); + if (retval) { + pr_err("bind to driver error (%d)\n", retval); + device_del(&fusb300->gadget.dev); + goto error; + } + + return 0; + +error: + fusb300->driver = NULL; + fusb300->gadget.dev.driver = NULL; + + return retval; +} +EXPORT_SYMBOL(usb_gadget_probe_driver); + +int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) +{ + struct fusb300 *fusb300 = the_controller; + + if (driver != fusb300->driver || !driver->unbind) + return -EINVAL; + + driver->unbind(&fusb300->gadget); + fusb300->gadget.dev.driver = NULL; + + init_controller(fusb300); + device_del(&fusb300->gadget.dev); + fusb300->driver = NULL; + + return 0; +} +EXPORT_SYMBOL(usb_gadget_unregister_driver); +/*--------------------------------------------------------------------------*/ + +static int fusb300_udc_pullup(struct usb_gadget *_gadget, int is_active) +{ + return 0; +} + +static struct usb_gadget_ops fusb300_gadget_ops = { + .pullup = fusb300_udc_pullup, +}; + +static int __exit fusb300_remove(struct platform_device *pdev) +{ + struct fusb300 *fusb300 = dev_get_drvdata(&pdev->dev); + + iounmap(fusb300->reg); + free_irq(platform_get_irq(pdev, 0), fusb300); + + fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req); + kfree(fusb300); + + return 0; +} + +static int __init fusb300_probe(struct platform_device *pdev) +{ + struct resource *res, *ires, *ires1; + void __iomem *reg = NULL; + struct fusb300 *fusb300 = NULL; + struct fusb300_ep *_ep[FUSB300_MAX_NUM_EP]; + int ret = 0; + int i; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENODEV; + pr_err("platform_get_resource error.\n"); + goto clean_up; + } + + ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!ires) { + ret = -ENODEV; + dev_err(&pdev->dev, + "platform_get_resource IORESOURCE_IRQ error.\n"); + goto clean_up; + } + + ires1 = platform_get_resource(pdev, IORESOURCE_IRQ, 1); + if (!ires1) { + ret = -ENODEV; + dev_err(&pdev->dev, + "platform_get_resource IORESOURCE_IRQ 1 error.\n"); + goto clean_up; + } + + reg = ioremap(res->start, resource_size(res)); + if (reg == NULL) { + ret = -ENOMEM; + pr_err("ioremap error.\n"); + goto clean_up; + } + + /* initialize udc */ + fusb300 = kzalloc(sizeof(struct fusb300), GFP_KERNEL); + if (fusb300 == NULL) { + pr_err("kzalloc error\n"); + goto clean_up; + } + + for (i = 0; i < FUSB300_MAX_NUM_EP; i++) { + _ep[i] = kzalloc(sizeof(struct fusb300_ep), GFP_KERNEL); + if (_ep[i] == NULL) { + pr_err("_ep kzalloc error\n"); + goto clean_up; + } + fusb300->ep[i] = _ep[i]; + } + + spin_lock_init(&fusb300->lock); + + dev_set_drvdata(&pdev->dev, fusb300); + + fusb300->gadget.ops = &fusb300_gadget_ops; + + device_initialize(&fusb300->gadget.dev); + + dev_set_name(&fusb300->gadget.dev, "gadget"); + + fusb300->gadget.is_dualspeed = 1; + fusb300->gadget.dev.parent = &pdev->dev; + fusb300->gadget.dev.dma_mask = pdev->dev.dma_mask; + fusb300->gadget.dev.release = pdev->dev.release; + fusb300->gadget.name = udc_name; + fusb300->reg = reg; + + ret = request_irq(ires->start, fusb300_irq, IRQF_DISABLED | IRQF_SHARED, + udc_name, fusb300); + if (ret < 0) { + pr_err("request_irq error (%d)\n", ret); + goto clean_up; + } + + ret = request_irq(ires1->start, fusb300_irq, + IRQF_DISABLED | IRQF_SHARED, udc_name, fusb300); + if (ret < 0) { + pr_err("request_irq1 error (%d)\n", ret); + goto clean_up; + } + + INIT_LIST_HEAD(&fusb300->gadget.ep_list); + + for (i = 0; i < FUSB300_MAX_NUM_EP ; i++) { + struct fusb300_ep *ep = fusb300->ep[i]; + + if (i != 0) { + INIT_LIST_HEAD(&fusb300->ep[i]->ep.ep_list); + list_add_tail(&fusb300->ep[i]->ep.ep_list, + &fusb300->gadget.ep_list); + } + ep->fusb300 = fusb300; + INIT_LIST_HEAD(&ep->queue); + ep->ep.name = fusb300_ep_name[i]; + ep->ep.ops = &fusb300_ep_ops; + ep->ep.maxpacket = HS_BULK_MAX_PACKET_SIZE; + } + fusb300->ep[0]->ep.maxpacket = HS_CTL_MAX_PACKET_SIZE; + fusb300->ep[0]->epnum = 0; + fusb300->gadget.ep0 = &fusb300->ep[0]->ep; + INIT_LIST_HEAD(&fusb300->gadget.ep0->ep_list); + + the_controller = fusb300; + + fusb300->ep0_req = fusb300_alloc_request(&fusb300->ep[0]->ep, + GFP_KERNEL); + if (fusb300->ep0_req == NULL) + goto clean_up3; + + init_controller(fusb300); + dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION); + + return 0; + +clean_up3: + free_irq(ires->start, fusb300); + +clean_up: + if (fusb300) { + if (fusb300->ep0_req) + fusb300_free_request(&fusb300->ep[0]->ep, + fusb300->ep0_req); + kfree(fusb300); + } + if (reg) + iounmap(reg); + + return ret; +} + +static struct platform_driver fusb300_driver = { + .remove = __exit_p(fusb300_remove), + .driver = { + .name = (char *) udc_name, + .owner = THIS_MODULE, + }, +}; + +static int __init fusb300_udc_init(void) +{ + return platform_driver_probe(&fusb300_driver, fusb300_probe); +} + +module_init(fusb300_udc_init); + +static void __exit fusb300_udc_cleanup(void) +{ + platform_driver_unregister(&fusb300_driver); +} +module_exit(fusb300_udc_cleanup); diff --git a/drivers/usb/gadget/fusb300_udc.h b/drivers/usb/gadget/fusb300_udc.h new file mode 100644 index 000000000000..f51aa2ef1f90 --- /dev/null +++ b/drivers/usb/gadget/fusb300_udc.h @@ -0,0 +1,687 @@ +/* + * Fusb300 UDC (USB gadget) + * + * Copyright (C) 2010 Faraday Technology Corp. + * + * Author : Yuan-hsin Chen <yhchen@faraday-tech.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ + + +#ifndef __FUSB300_UDC_H__ +#define __FUSB300_UDC_H_ + +#include <linux/kernel.h> + +#define FUSB300_OFFSET_GCR 0x00 +#define FUSB300_OFFSET_GTM 0x04 +#define FUSB300_OFFSET_DAR 0x08 +#define FUSB300_OFFSET_CSR 0x0C +#define FUSB300_OFFSET_CXPORT 0x10 +#define FUSB300_OFFSET_EPSET0(n) (0x20 + (n - 1) * 0x30) +#define FUSB300_OFFSET_EPSET1(n) (0x24 + (n - 1) * 0x30) +#define FUSB300_OFFSET_EPSET2(n) (0x28 + (n - 1) * 0x30) +#define FUSB300_OFFSET_EPFFR(n) (0x2c + (n - 1) * 0x30) +#define FUSB300_OFFSET_EPSTRID(n) (0x40 + (n - 1) * 0x30) +#define FUSB300_OFFSET_HSPTM 0x300 +#define FUSB300_OFFSET_HSCR 0x304 +#define FUSB300_OFFSET_SSCR0 0x308 +#define FUSB300_OFFSET_SSCR1 0x30C +#define FUSB300_OFFSET_TT 0x310 +#define FUSB300_OFFSET_DEVNOTF 0x314 +#define FUSB300_OFFSET_DNC1 0x318 +#define FUSB300_OFFSET_CS 0x31C +#define FUSB300_OFFSET_SOF 0x324 +#define FUSB300_OFFSET_EFCS 0x328 +#define FUSB300_OFFSET_IGR0 0x400 +#define FUSB300_OFFSET_IGR1 0x404 +#define FUSB300_OFFSET_IGR2 0x408 +#define FUSB300_OFFSET_IGR3 0x40C +#define FUSB300_OFFSET_IGR4 0x410 +#define FUSB300_OFFSET_IGR5 0x414 +#define FUSB300_OFFSET_IGER0 0x420 +#define FUSB300_OFFSET_IGER1 0x424 +#define FUSB300_OFFSET_IGER2 0x428 +#define FUSB300_OFFSET_IGER3 0x42C +#define FUSB300_OFFSET_IGER4 0x430 +#define FUSB300_OFFSET_IGER5 0x434 +#define FUSB300_OFFSET_DMAHMER 0x500 +#define FUSB300_OFFSET_EPPRDRDY 0x504 +#define FUSB300_OFFSET_DMAEPMR 0x508 +#define FUSB300_OFFSET_DMAENR 0x50C +#define FUSB300_OFFSET_DMAAPR 0x510 +#define FUSB300_OFFSET_AHBCR 0x514 +#define FUSB300_OFFSET_EPPRD_W0(n) (0x520 + (n - 1) * 0x10) +#define FUSB300_OFFSET_EPPRD_W1(n) (0x524 + (n - 1) * 0x10) +#define FUSB300_OFFSET_EPPRD_W2(n) (0x528 + (n - 1) * 0x10) +#define FUSB300_OFFSET_EPRD_PTR(n) (0x52C + (n - 1) * 0x10) +#define FUSB300_OFFSET_BUFDBG_START 0x800 +#define FUSB300_OFFSET_BUFDBG_END 0xBFC +#define FUSB300_OFFSET_EPPORT(n) (0x1010 + (n - 1) * 0x10) + +/* + * * Global Control Register (offset = 000H) + * */ +#define FUSB300_GCR_SF_RST (1 << 8) +#define FUSB300_GCR_VBUS_STATUS (1 << 7) +#define FUSB300_GCR_FORCE_HS_SUSP (1 << 6) +#define FUSB300_GCR_SYNC_FIFO1_CLR (1 << 5) +#define FUSB300_GCR_SYNC_FIFO0_CLR (1 << 4) +#define FUSB300_GCR_FIFOCLR (1 << 3) +#define FUSB300_GCR_GLINTEN (1 << 2) +#define FUSB300_GCR_DEVEN_FS 0x3 +#define FUSB300_GCR_DEVEN_HS 0x2 +#define FUSB300_GCR_DEVEN_SS 0x1 +#define FUSB300_GCR_DEVDIS 0x0 +#define FUSB300_GCR_DEVEN_MSK 0x3 + + +/* + * *Global Test Mode (offset = 004H) + * */ +#define FUSB300_GTM_TST_DIS_SOFGEN (1 << 16) +#define FUSB300_GTM_TST_CUR_EP_ENTRY(n) ((n & 0xF) << 12) +#define FUSB300_GTM_TST_EP_ENTRY(n) ((n & 0xF) << 8) +#define FUSB300_GTM_TST_EP_NUM(n) ((n & 0xF) << 4) +#define FUSB300_GTM_TST_FIFO_DEG (1 << 1) +#define FUSB300_GTM_TSTMODE (1 << 0) + +/* + * * Device Address Register (offset = 008H) + * */ +#define FUSB300_DAR_SETCONFG (1 << 7) +#define FUSB300_DAR_DRVADDR(x) (x & 0x7F) +#define FUSB300_DAR_DRVADDR_MSK 0x7F + +/* + * *Control Transfer Configuration and Status Register + * (CX_Config_Status, offset = 00CH) + * */ +#define FUSB300_CSR_LEN(x) ((x & 0xFFFF) << 8) +#define FUSB300_CSR_LEN_MSK (0xFFFF << 8) +#define FUSB300_CSR_EMP (1 << 4) +#define FUSB300_CSR_FUL (1 << 3) +#define FUSB300_CSR_CLR (1 << 2) +#define FUSB300_CSR_STL (1 << 1) +#define FUSB300_CSR_DONE (1 << 0) + +/* + * * EPn Setting 0 (EPn_SET0, offset = 020H+(n-1)*30H, n=1~15 ) + * */ +#define FUSB300_EPSET0_CLRSEQNUM (1 << 2) +#define FUSB300_EPSET0_EPn_TX0BYTE (1 << 1) +#define FUSB300_EPSET0_STL (1 << 0) + +/* + * * EPn Setting 1 (EPn_SET1, offset = 024H+(n-1)*30H, n=1~15) + * */ +#define FUSB300_EPSET1_START_ENTRY(x) ((x & 0xFF) << 24) +#define FUSB300_EPSET1_START_ENTRY_MSK (0xFF << 24) +#define FUSB300_EPSET1_FIFOENTRY(x) ((x & 0x1F) << 12) +#define FUSB300_EPSET1_FIFOENTRY_MSK (0x1f << 12) +#define FUSB300_EPSET1_INTERVAL(x) ((x & 0x7) << 6) +#define FUSB300_EPSET1_BWNUM(x) ((x & 0x3) << 4) +#define FUSB300_EPSET1_TYPEISO (1 << 2) +#define FUSB300_EPSET1_TYPEBLK (2 << 2) +#define FUSB300_EPSET1_TYPEINT (3 << 2) +#define FUSB300_EPSET1_TYPE(x) ((x & 0x3) << 2) +#define FUSB300_EPSET1_TYPE_MSK (0x3 << 2) +#define FUSB300_EPSET1_DIROUT (0 << 1) +#define FUSB300_EPSET1_DIRIN (1 << 1) +#define FUSB300_EPSET1_DIR(x) ((x & 0x1) << 1) +#define FUSB300_EPSET1_DIRIN (1 << 1) +#define FUSB300_EPSET1_DIR_MSK ((0x1) << 1) +#define FUSB300_EPSET1_ACTDIS 0 +#define FUSB300_EPSET1_ACTEN 1 + +/* + * *EPn Setting 2 (EPn_SET2, offset = 028H+(n-1)*30H, n=1~15) + * */ +#define FUSB300_EPSET2_ADDROFS(x) ((x & 0x7FFF) << 16) +#define FUSB300_EPSET2_ADDROFS_MSK (0x7fff << 16) +#define FUSB300_EPSET2_MPS(x) (x & 0x7FF) +#define FUSB300_EPSET2_MPS_MSK 0x7FF + +/* + * * EPn FIFO Register (offset = 2cH+(n-1)*30H) + * */ +#define FUSB300_FFR_RST (1 << 31) +#define FUSB300_FF_FUL (1 << 30) +#define FUSB300_FF_EMPTY (1 << 29) +#define FUSB300_FFR_BYCNT 0x1FFFF + +/* + * *EPn Stream ID (EPn_STR_ID, offset = 040H+(n-1)*30H, n=1~15) + * */ +#define FUSB300_STRID_STREN (1 << 16) +#define FUSB300_STRID_STRID(x) (x & 0xFFFF) + +/* + * *HS PHY Test Mode (offset = 300H) + * */ +#define FUSB300_HSPTM_TSTPKDONE (1 << 4) +#define FUSB300_HSPTM_TSTPKT (1 << 3) +#define FUSB300_HSPTM_TSTSET0NAK (1 << 2) +#define FUSB300_HSPTM_TSTKSTA (1 << 1) +#define FUSB300_HSPTM_TSTJSTA (1 << 0) + +/* + * *HS Control Register (offset = 304H) + * */ +#define FUSB300_HSCR_HS_LPM_PERMIT (1 << 8) +#define FUSB300_HSCR_HS_LPM_RMWKUP (1 << 7) +#define FUSB300_HSCR_CAP_LPM_RMWKUP (1 << 6) +#define FUSB300_HSCR_HS_GOSUSP (1 << 5) +#define FUSB300_HSCR_HS_GORMWKU (1 << 4) +#define FUSB300_HSCR_CAP_RMWKUP (1 << 3) +#define FUSB300_HSCR_IDLECNT_0MS 0 +#define FUSB300_HSCR_IDLECNT_1MS 1 +#define FUSB300_HSCR_IDLECNT_2MS 2 +#define FUSB300_HSCR_IDLECNT_3MS 3 +#define FUSB300_HSCR_IDLECNT_4MS 4 +#define FUSB300_HSCR_IDLECNT_5MS 5 +#define FUSB300_HSCR_IDLECNT_6MS 6 +#define FUSB300_HSCR_IDLECNT_7MS 7 + +/* + * * SS Controller Register 0 (offset = 308H) + * */ +#define FUSB300_SSCR0_MAX_INTERVAL(x) ((x & 0x7) << 4) +#define FUSB300_SSCR0_U2_FUN_EN (1 << 1) +#define FUSB300_SSCR0_U1_FUN_EN (1 << 0) + +/* + * * SS Controller Register 1 (offset = 30CH) + * */ +#define FUSB300_SSCR1_GO_U3_DONE (1 << 8) +#define FUSB300_SSCR1_TXDEEMPH_LEVEL (1 << 7) +#define FUSB300_SSCR1_DIS_SCRMB (1 << 6) +#define FUSB300_SSCR1_FORCE_RECOVERY (1 << 5) +#define FUSB300_SSCR1_U3_WAKEUP_EN (1 << 4) +#define FUSB300_SSCR1_U2_EXIT_EN (1 << 3) +#define FUSB300_SSCR1_U1_EXIT_EN (1 << 2) +#define FUSB300_SSCR1_U2_ENTRY_EN (1 << 1) +#define FUSB300_SSCR1_U1_ENTRY_EN (1 << 0) + +/* + * *SS Controller Register 2 (offset = 310H) + * */ +#define FUSB300_SSCR2_SS_TX_SWING (1 << 25) +#define FUSB300_SSCR2_FORCE_LINKPM_ACCEPT (1 << 24) +#define FUSB300_SSCR2_U2_INACT_TIMEOUT(x) ((x & 0xFF) << 16) +#define FUSB300_SSCR2_U1TIMEOUT(x) ((x & 0xFF) << 8) +#define FUSB300_SSCR2_U2TIMEOUT(x) (x & 0xFF) + +/* + * *SS Device Notification Control (DEV_NOTF, offset = 314H) + * */ +#define FUSB300_DEVNOTF_CONTEXT0(x) ((x & 0xFFFFFF) << 8) +#define FUSB300_DEVNOTF_TYPE_DIS 0 +#define FUSB300_DEVNOTF_TYPE_FUNCWAKE 1 +#define FUSB300_DEVNOTF_TYPE_LTM 2 +#define FUSB300_DEVNOTF_TYPE_BUSINT_ADJMSG 3 + +/* + * *BFM Arbiter Priority Register (BFM_ARB offset = 31CH) + * */ +#define FUSB300_BFMARB_ARB_M1 (1 << 3) +#define FUSB300_BFMARB_ARB_M0 (1 << 2) +#define FUSB300_BFMARB_ARB_S1 (1 << 1) +#define FUSB300_BFMARB_ARB_S0 1 + +/* + * *Vendor Specific IO Control Register (offset = 320H) + * */ +#define FUSB300_VSIC_VCTLOAD_N (1 << 8) +#define FUSB300_VSIC_VCTL(x) (x & 0x3F) + +/* + * *SOF Mask Timer (offset = 324H) + * */ +#define FUSB300_SOF_MASK_TIMER_HS 0x044c +#define FUSB300_SOF_MASK_TIMER_FS 0x2710 + +/* + * *Error Flag and Control Status (offset = 328H) + * */ +#define FUSB300_EFCS_PM_STATE_U3 3 +#define FUSB300_EFCS_PM_STATE_U2 2 +#define FUSB300_EFCS_PM_STATE_U1 1 +#define FUSB300_EFCS_PM_STATE_U0 0 + +/* + * *Interrupt Group 0 Register (offset = 400H) + * */ +#define FUSB300_IGR0_EP15_PRD_INT (1 << 31) +#define FUSB300_IGR0_EP14_PRD_INT (1 << 30) +#define FUSB300_IGR0_EP13_PRD_INT (1 << 29) +#define FUSB300_IGR0_EP12_PRD_INT (1 << 28) +#define FUSB300_IGR0_EP11_PRD_INT (1 << 27) +#define FUSB300_IGR0_EP10_PRD_INT (1 << 26) +#define FUSB300_IGR0_EP9_PRD_INT (1 << 25) +#define FUSB300_IGR0_EP8_PRD_INT (1 << 24) +#define FUSB300_IGR0_EP7_PRD_INT (1 << 23) +#define FUSB300_IGR0_EP6_PRD_INT (1 << 22) +#define FUSB300_IGR0_EP5_PRD_INT (1 << 21) +#define FUSB300_IGR0_EP4_PRD_INT (1 << 20) +#define FUSB300_IGR0_EP3_PRD_INT (1 << 19) +#define FUSB300_IGR0_EP2_PRD_INT (1 << 18) +#define FUSB300_IGR0_EP1_PRD_INT (1 << 17) +#define FUSB300_IGR0_EPn_PRD_INT(n) (1 << (n + 16)) + +#define FUSB300_IGR0_EP15_FIFO_INT (1 << 15) +#define FUSB300_IGR0_EP14_FIFO_INT (1 << 14) +#define FUSB300_IGR0_EP13_FIFO_INT (1 << 13) +#define FUSB300_IGR0_EP12_FIFO_INT (1 << 12) +#define FUSB300_IGR0_EP11_FIFO_INT (1 << 11) +#define FUSB300_IGR0_EP10_FIFO_INT (1 << 10) +#define FUSB300_IGR0_EP9_FIFO_INT (1 << 9) +#define FUSB300_IGR0_EP8_FIFO_INT (1 << 8) +#define FUSB300_IGR0_EP7_FIFO_INT (1 << 7) +#define FUSB300_IGR0_EP6_FIFO_INT (1 << 6) +#define FUSB300_IGR0_EP5_FIFO_INT (1 << 5) +#define FUSB300_IGR0_EP4_FIFO_INT (1 << 4) +#define FUSB300_IGR0_EP3_FIFO_INT (1 << 3) +#define FUSB300_IGR0_EP2_FIFO_INT (1 << 2) +#define FUSB300_IGR0_EP1_FIFO_INT (1 << 1) +#define FUSB300_IGR0_EPn_FIFO_INT(n) (1 << n) + +/* + * *Interrupt Group 1 Register (offset = 404H) + * */ +#define FUSB300_IGR1_INTGRP5 (1 << 31) +#define FUSB300_IGR1_VBUS_CHG_INT (1 << 30) +#define FUSB300_IGR1_SYNF1_EMPTY_INT (1 << 29) +#define FUSB300_IGR1_SYNF0_EMPTY_INT (1 << 28) +#define FUSB300_IGR1_U3_EXIT_FAIL_INT (1 << 27) +#define FUSB300_IGR1_U2_EXIT_FAIL_INT (1 << 26) +#define FUSB300_IGR1_U1_EXIT_FAIL_INT (1 << 25) +#define FUSB300_IGR1_U2_ENTRY_FAIL_INT (1 << 24) +#define FUSB300_IGR1_U1_ENTRY_FAIL_INT (1 << 23) +#define FUSB300_IGR1_U3_EXIT_INT (1 << 22) +#define FUSB300_IGR1_U2_EXIT_INT (1 << 21) +#define FUSB300_IGR1_U1_EXIT_INT (1 << 20) +#define FUSB300_IGR1_U3_ENTRY_INT (1 << 19) +#define FUSB300_IGR1_U2_ENTRY_INT (1 << 18) +#define FUSB300_IGR1_U1_ENTRY_INT (1 << 17) +#define FUSB300_IGR1_HOT_RST_INT (1 << 16) +#define FUSB300_IGR1_WARM_RST_INT (1 << 15) +#define FUSB300_IGR1_RESM_INT (1 << 14) +#define FUSB300_IGR1_SUSP_INT (1 << 13) +#define FUSB300_IGR1_HS_LPM_INT (1 << 12) +#define FUSB300_IGR1_USBRST_INT (1 << 11) +#define FUSB300_IGR1_DEV_MODE_CHG_INT (1 << 9) +#define FUSB300_IGR1_CX_COMABT_INT (1 << 8) +#define FUSB300_IGR1_CX_COMFAIL_INT (1 << 7) +#define FUSB300_IGR1_CX_CMDEND_INT (1 << 6) +#define FUSB300_IGR1_CX_OUT_INT (1 << 5) +#define FUSB300_IGR1_CX_IN_INT (1 << 4) +#define FUSB300_IGR1_CX_SETUP_INT (1 << 3) +#define FUSB300_IGR1_INTGRP4 (1 << 2) +#define FUSB300_IGR1_INTGRP3 (1 << 1) +#define FUSB300_IGR1_INTGRP2 (1 << 0) + +/* + * *Interrupt Group 2 Register (offset = 408H) + * */ +#define FUSB300_IGR2_EP6_STR_ACCEPT_INT (1 << 29) +#define FUSB300_IGR2_EP6_STR_RESUME_INT (1 << 28) +#define FUSB300_IGR2_EP6_STR_REQ_INT (1 << 27) +#define FUSB300_IGR2_EP6_STR_NOTRDY_INT (1 << 26) +#define FUSB300_IGR2_EP6_STR_PRIME_INT (1 << 25) +#define FUSB300_IGR2_EP5_STR_ACCEPT_INT (1 << 24) +#define FUSB300_IGR2_EP5_STR_RESUME_INT (1 << 23) +#define FUSB300_IGR2_EP5_STR_REQ_INT (1 << 22) +#define FUSB300_IGR2_EP5_STR_NOTRDY_INT (1 << 21) +#define FUSB300_IGR2_EP5_STR_PRIME_INT (1 << 20) +#define FUSB300_IGR2_EP4_STR_ACCEPT_INT (1 << 19) +#define FUSB300_IGR2_EP4_STR_RESUME_INT (1 << 18) +#define FUSB300_IGR2_EP4_STR_REQ_INT (1 << 17) +#define FUSB300_IGR2_EP4_STR_NOTRDY_INT (1 << 16) +#define FUSB300_IGR2_EP4_STR_PRIME_INT (1 << 15) +#define FUSB300_IGR2_EP3_STR_ACCEPT_INT (1 << 14) +#define FUSB300_IGR2_EP3_STR_RESUME_INT (1 << 13) +#define FUSB300_IGR2_EP3_STR_REQ_INT (1 << 12) +#define FUSB300_IGR2_EP3_STR_NOTRDY_INT (1 << 11) +#define FUSB300_IGR2_EP3_STR_PRIME_INT (1 << 10) +#define FUSB300_IGR2_EP2_STR_ACCEPT_INT (1 << 9) +#define FUSB300_IGR2_EP2_STR_RESUME_INT (1 << 8) +#define FUSB300_IGR2_EP2_STR_REQ_INT (1 << 7) +#define FUSB300_IGR2_EP2_STR_NOTRDY_INT (1 << 6) +#define FUSB300_IGR2_EP2_STR_PRIME_INT (1 << 5) +#define FUSB300_IGR2_EP1_STR_ACCEPT_INT (1 << 4) +#define FUSB300_IGR2_EP1_STR_RESUME_INT (1 << 3) +#define FUSB300_IGR2_EP1_STR_REQ_INT (1 << 2) +#define FUSB300_IGR2_EP1_STR_NOTRDY_INT (1 << 1) +#define FUSB300_IGR2_EP1_STR_PRIME_INT (1 << 0) + +#define FUSB300_IGR2_EP_STR_ACCEPT_INT(n) (1 << (5 * n - 1)) +#define FUSB300_IGR2_EP_STR_RESUME_INT(n) (1 << (5 * n - 2)) +#define FUSB300_IGR2_EP_STR_REQ_INT(n) (1 << (5 * n - 3)) +#define FUSB300_IGR2_EP_STR_NOTRDY_INT(n) (1 << (5 * n - 4)) +#define FUSB300_IGR2_EP_STR_PRIME_INT(n) (1 << (5 * n - 5)) + +/* + * *Interrupt Group 3 Register (offset = 40CH) + * */ +#define FUSB300_IGR3_EP12_STR_ACCEPT_INT (1 << 29) +#define FUSB300_IGR3_EP12_STR_RESUME_INT (1 << 28) +#define FUSB300_IGR3_EP12_STR_REQ_INT (1 << 27) +#define FUSB300_IGR3_EP12_STR_NOTRDY_INT (1 << 26) +#define FUSB300_IGR3_EP12_STR_PRIME_INT (1 << 25) +#define FUSB300_IGR3_EP11_STR_ACCEPT_INT (1 << 24) +#define FUSB300_IGR3_EP11_STR_RESUME_INT (1 << 23) +#define FUSB300_IGR3_EP11_STR_REQ_INT (1 << 22) +#define FUSB300_IGR3_EP11_STR_NOTRDY_INT (1 << 21) +#define FUSB300_IGR3_EP11_STR_PRIME_INT (1 << 20) +#define FUSB300_IGR3_EP10_STR_ACCEPT_INT (1 << 19) +#define FUSB300_IGR3_EP10_STR_RESUME_INT (1 << 18) +#define FUSB300_IGR3_EP10_STR_REQ_INT (1 << 17) +#define FUSB300_IGR3_EP10_STR_NOTRDY_INT (1 << 16) +#define FUSB300_IGR3_EP10_STR_PRIME_INT (1 << 15) +#define FUSB300_IGR3_EP9_STR_ACCEPT_INT (1 << 14) +#define FUSB300_IGR3_EP9_STR_RESUME_INT (1 << 13) +#define FUSB300_IGR3_EP9_STR_REQ_INT (1 << 12) +#define FUSB300_IGR3_EP9_STR_NOTRDY_INT (1 << 11) +#define FUSB300_IGR3_EP9_STR_PRIME_INT (1 << 10) +#define FUSB300_IGR3_EP8_STR_ACCEPT_INT (1 << 9) +#define FUSB300_IGR3_EP8_STR_RESUME_INT (1 << 8) +#define FUSB300_IGR3_EP8_STR_REQ_INT (1 << 7) +#define FUSB300_IGR3_EP8_STR_NOTRDY_INT (1 << 6) +#define FUSB300_IGR3_EP8_STR_PRIME_INT (1 << 5) +#define FUSB300_IGR3_EP7_STR_ACCEPT_INT (1 << 4) +#define FUSB300_IGR3_EP7_STR_RESUME_INT (1 << 3) +#define FUSB300_IGR3_EP7_STR_REQ_INT (1 << 2) +#define FUSB300_IGR3_EP7_STR_NOTRDY_INT (1 << 1) +#define FUSB300_IGR3_EP7_STR_PRIME_INT (1 << 0) + +#define FUSB300_IGR3_EP_STR_ACCEPT_INT(n) (1 << (5 * (n - 6) - 1)) +#define FUSB300_IGR3_EP_STR_RESUME_INT(n) (1 << (5 * (n - 6) - 2)) +#define FUSB300_IGR3_EP_STR_REQ_INT(n) (1 << (5 * (n - 6) - 3)) +#define FUSB300_IGR3_EP_STR_NOTRDY_INT(n) (1 << (5 * (n - 6) - 4)) +#define FUSB300_IGR3_EP_STR_PRIME_INT(n) (1 << (5 * (n - 6) - 5)) + +/* + * *Interrupt Group 4 Register (offset = 410H) + * */ +#define FUSB300_IGR4_EP15_RX0_INT (1 << 31) +#define FUSB300_IGR4_EP14_RX0_INT (1 << 30) +#define FUSB300_IGR4_EP13_RX0_INT (1 << 29) +#define FUSB300_IGR4_EP12_RX0_INT (1 << 28) +#define FUSB300_IGR4_EP11_RX0_INT (1 << 27) +#define FUSB300_IGR4_EP10_RX0_INT (1 << 26) +#define FUSB300_IGR4_EP9_RX0_INT (1 << 25) +#define FUSB300_IGR4_EP8_RX0_INT (1 << 24) +#define FUSB300_IGR4_EP7_RX0_INT (1 << 23) +#define FUSB300_IGR4_EP6_RX0_INT (1 << 22) +#define FUSB300_IGR4_EP5_RX0_INT (1 << 21) +#define FUSB300_IGR4_EP4_RX0_INT (1 << 20) +#define FUSB300_IGR4_EP3_RX0_INT (1 << 19) +#define FUSB300_IGR4_EP2_RX0_INT (1 << 18) +#define FUSB300_IGR4_EP1_RX0_INT (1 << 17) +#define FUSB300_IGR4_EP_RX0_INT(x) (1 << (x + 16)) +#define FUSB300_IGR4_EP15_STR_ACCEPT_INT (1 << 14) +#define FUSB300_IGR4_EP15_STR_RESUME_INT (1 << 13) +#define FUSB300_IGR4_EP15_STR_REQ_INT (1 << 12) +#define FUSB300_IGR4_EP15_STR_NOTRDY_INT (1 << 11) +#define FUSB300_IGR4_EP15_STR_PRIME_INT (1 << 10) +#define FUSB300_IGR4_EP14_STR_ACCEPT_INT (1 << 9) +#define FUSB300_IGR4_EP14_STR_RESUME_INT (1 << 8) +#define FUSB300_IGR4_EP14_STR_REQ_INT (1 << 7) +#define FUSB300_IGR4_EP14_STR_NOTRDY_INT (1 << 6) +#define FUSB300_IGR4_EP14_STR_PRIME_INT (1 << 5) +#define FUSB300_IGR4_EP13_STR_ACCEPT_INT (1 << 4) +#define FUSB300_IGR4_EP13_STR_RESUME_INT (1 << 3) +#define FUSB300_IGR4_EP13_STR_REQ_INT (1 << 2) +#define FUSB300_IGR4_EP13_STR_NOTRDY_INT (1 << 1) +#define FUSB300_IGR4_EP13_STR_PRIME_INT (1 << 0) + +#define FUSB300_IGR4_EP_STR_ACCEPT_INT(n) (1 << (5 * (n - 12) - 1)) +#define FUSB300_IGR4_EP_STR_RESUME_INT(n) (1 << (5 * (n - 12) - 2)) +#define FUSB300_IGR4_EP_STR_REQ_INT(n) (1 << (5 * (n - 12) - 3)) +#define FUSB300_IGR4_EP_STR_NOTRDY_INT(n) (1 << (5 * (n - 12) - 4)) +#define FUSB300_IGR4_EP_STR_PRIME_INT(n) (1 << (5 * (n - 12) - 5)) + +/* + * *Interrupt Group 5 Register (offset = 414H) + * */ +#define FUSB300_IGR5_EP_STL_INT(n) (1 << n) + +/* + * *Interrupt Enable Group 0 Register (offset = 420H) + * */ +#define FUSB300_IGER0_EEP15_PRD_INT (1 << 31) +#define FUSB300_IGER0_EEP14_PRD_INT (1 << 30) +#define FUSB300_IGER0_EEP13_PRD_INT (1 << 29) +#define FUSB300_IGER0_EEP12_PRD_INT (1 << 28) +#define FUSB300_IGER0_EEP11_PRD_INT (1 << 27) +#define FUSB300_IGER0_EEP10_PRD_INT (1 << 26) +#define FUSB300_IGER0_EEP9_PRD_INT (1 << 25) +#define FUSB300_IGER0_EP8_PRD_INT (1 << 24) +#define FUSB300_IGER0_EEP7_PRD_INT (1 << 23) +#define FUSB300_IGER0_EEP6_PRD_INT (1 << 22) +#define FUSB300_IGER0_EEP5_PRD_INT (1 << 21) +#define FUSB300_IGER0_EEP4_PRD_INT (1 << 20) +#define FUSB300_IGER0_EEP3_PRD_INT (1 << 19) +#define FUSB300_IGER0_EEP2_PRD_INT (1 << 18) +#define FUSB300_IGER0_EEP1_PRD_INT (1 << 17) +#define FUSB300_IGER0_EEPn_PRD_INT(n) (1 << (n + 16)) + +#define FUSB300_IGER0_EEP15_FIFO_INT (1 << 15) +#define FUSB300_IGER0_EEP14_FIFO_INT (1 << 14) +#define FUSB300_IGER0_EEP13_FIFO_INT (1 << 13) +#define FUSB300_IGER0_EEP12_FIFO_INT (1 << 12) +#define FUSB300_IGER0_EEP11_FIFO_INT (1 << 11) +#define FUSB300_IGER0_EEP10_FIFO_INT (1 << 10) +#define FUSB300_IGER0_EEP9_FIFO_INT (1 << 9) +#define FUSB300_IGER0_EEP8_FIFO_INT (1 << 8) +#define FUSB300_IGER0_EEP7_FIFO_INT (1 << 7) +#define FUSB300_IGER0_EEP6_FIFO_INT (1 << 6) +#define FUSB300_IGER0_EEP5_FIFO_INT (1 << 5) +#define FUSB300_IGER0_EEP4_FIFO_INT (1 << 4) +#define FUSB300_IGER0_EEP3_FIFO_INT (1 << 3) +#define FUSB300_IGER0_EEP2_FIFO_INT (1 << 2) +#define FUSB300_IGER0_EEP1_FIFO_INT (1 << 1) +#define FUSB300_IGER0_EEPn_FIFO_INT(n) (1 << n) + +/* + * *Interrupt Enable Group 1 Register (offset = 424H) + * */ +#define FUSB300_IGER1_EINT_GRP5 (1 << 31) +#define FUSB300_IGER1_VBUS_CHG_INT (1 << 30) +#define FUSB300_IGER1_SYNF1_EMPTY_INT (1 << 29) +#define FUSB300_IGER1_SYNF0_EMPTY_INT (1 << 28) +#define FUSB300_IGER1_U3_EXIT_FAIL_INT (1 << 27) +#define FUSB300_IGER1_U2_EXIT_FAIL_INT (1 << 26) +#define FUSB300_IGER1_U1_EXIT_FAIL_INT (1 << 25) +#define FUSB300_IGER1_U2_ENTRY_FAIL_INT (1 << 24) +#define FUSB300_IGER1_U1_ENTRY_FAIL_INT (1 << 23) +#define FUSB300_IGER1_U3_EXIT_INT (1 << 22) +#define FUSB300_IGER1_U2_EXIT_INT (1 << 21) +#define FUSB300_IGER1_U1_EXIT_INT (1 << 20) +#define FUSB300_IGER1_U3_ENTRY_INT (1 << 19) +#define FUSB300_IGER1_U2_ENTRY_INT (1 << 18) +#define FUSB300_IGER1_U1_ENTRY_INT (1 << 17) +#define FUSB300_IGER1_HOT_RST_INT (1 << 16) +#define FUSB300_IGER1_WARM_RST_INT (1 << 15) +#define FUSB300_IGER1_RESM_INT (1 << 14) +#define FUSB300_IGER1_SUSP_INT (1 << 13) +#define FUSB300_IGER1_LPM_INT (1 << 12) +#define FUSB300_IGER1_HS_RST_INT (1 << 11) +#define FUSB300_IGER1_EDEV_MODE_CHG_INT (1 << 9) +#define FUSB300_IGER1_CX_COMABT_INT (1 << 8) +#define FUSB300_IGER1_CX_COMFAIL_INT (1 << 7) +#define FUSB300_IGER1_CX_CMDEND_INT (1 << 6) +#define FUSB300_IGER1_CX_OUT_INT (1 << 5) +#define FUSB300_IGER1_CX_IN_INT (1 << 4) +#define FUSB300_IGER1_CX_SETUP_INT (1 << 3) +#define FUSB300_IGER1_INTGRP4 (1 << 2) +#define FUSB300_IGER1_INTGRP3 (1 << 1) +#define FUSB300_IGER1_INTGRP2 (1 << 0) + +/* + * *Interrupt Enable Group 2 Register (offset = 428H) + * */ +#define FUSB300_IGER2_EEP_STR_ACCEPT_INT(n) (1 << (5 * n - 1)) +#define FUSB300_IGER2_EEP_STR_RESUME_INT(n) (1 << (5 * n - 2)) +#define FUSB300_IGER2_EEP_STR_REQ_INT(n) (1 << (5 * n - 3)) +#define FUSB300_IGER2_EEP_STR_NOTRDY_INT(n) (1 << (5 * n - 4)) +#define FUSB300_IGER2_EEP_STR_PRIME_INT(n) (1 << (5 * n - 5)) + +/* + * *Interrupt Enable Group 3 Register (offset = 42CH) + * */ + +#define FUSB300_IGER3_EEP_STR_ACCEPT_INT(n) (1 << (5 * (n - 6) - 1)) +#define FUSB300_IGER3_EEP_STR_RESUME_INT(n) (1 << (5 * (n - 6) - 2)) +#define FUSB300_IGER3_EEP_STR_REQ_INT(n) (1 << (5 * (n - 6) - 3)) +#define FUSB300_IGER3_EEP_STR_NOTRDY_INT(n) (1 << (5 * (n - 6) - 4)) +#define FUSB300_IGER3_EEP_STR_PRIME_INT(n) (1 << (5 * (n - 6) - 5)) + +/* + * *Interrupt Enable Group 4 Register (offset = 430H) + * */ + +#define FUSB300_IGER4_EEP_RX0_INT(n) (1 << (n + 16)) +#define FUSB300_IGER4_EEP_STR_ACCEPT_INT(n) (1 << (5 * (n - 6) - 1)) +#define FUSB300_IGER4_EEP_STR_RESUME_INT(n) (1 << (5 * (n - 6) - 2)) +#define FUSB300_IGER4_EEP_STR_REQ_INT(n) (1 << (5 * (n - 6) - 3)) +#define FUSB300_IGER4_EEP_STR_NOTRDY_INT(n) (1 << (5 * (n - 6) - 4)) +#define FUSB300_IGER4_EEP_STR_PRIME_INT(n) (1 << (5 * (n - 6) - 5)) + +/* EP PRD Ready (EP_PRD_RDY, offset = 504H) */ + +#define FUSB300_EPPRDR_EP15_PRD_RDY (1 << 15) +#define FUSB300_EPPRDR_EP14_PRD_RDY (1 << 14) +#define FUSB300_EPPRDR_EP13_PRD_RDY (1 << 13) +#define FUSB300_EPPRDR_EP12_PRD_RDY (1 << 12) +#define FUSB300_EPPRDR_EP11_PRD_RDY (1 << 11) +#define FUSB300_EPPRDR_EP10_PRD_RDY (1 << 10) +#define FUSB300_EPPRDR_EP9_PRD_RDY (1 << 9) +#define FUSB300_EPPRDR_EP8_PRD_RDY (1 << 8) +#define FUSB300_EPPRDR_EP7_PRD_RDY (1 << 7) +#define FUSB300_EPPRDR_EP6_PRD_RDY (1 << 6) +#define FUSB300_EPPRDR_EP5_PRD_RDY (1 << 5) +#define FUSB300_EPPRDR_EP4_PRD_RDY (1 << 4) +#define FUSB300_EPPRDR_EP3_PRD_RDY (1 << 3) +#define FUSB300_EPPRDR_EP2_PRD_RDY (1 << 2) +#define FUSB300_EPPRDR_EP1_PRD_RDY (1 << 1) +#define FUSB300_EPPRDR_EP_PRD_RDY(n) (1 << n) + +/* AHB Bus Control Register (offset = 514H) */ +#define FUSB300_AHBBCR_S1_SPLIT_ON (1 << 17) +#define FUSB300_AHBBCR_S0_SPLIT_ON (1 << 16) +#define FUSB300_AHBBCR_S1_1entry (0 << 12) +#define FUSB300_AHBBCR_S1_4entry (3 << 12) +#define FUSB300_AHBBCR_S1_8entry (5 << 12) +#define FUSB300_AHBBCR_S1_16entry (7 << 12) +#define FUSB300_AHBBCR_S0_1entry (0 << 8) +#define FUSB300_AHBBCR_S0_4entry (3 << 8) +#define FUSB300_AHBBCR_S0_8entry (5 << 8) +#define FUSB300_AHBBCR_S0_16entry (7 << 8) +#define FUSB300_AHBBCR_M1_BURST_SINGLE (0 << 4) +#define FUSB300_AHBBCR_M1_BURST_INCR (1 << 4) +#define FUSB300_AHBBCR_M1_BURST_INCR4 (3 << 4) +#define FUSB300_AHBBCR_M1_BURST_INCR8 (5 << 4) +#define FUSB300_AHBBCR_M1_BURST_INCR16 (7 << 4) +#define FUSB300_AHBBCR_M0_BURST_SINGLE 0 +#define FUSB300_AHBBCR_M0_BURST_INCR 1 +#define FUSB300_AHBBCR_M0_BURST_INCR4 3 +#define FUSB300_AHBBCR_M0_BURST_INCR8 5 +#define FUSB300_AHBBCR_M0_BURST_INCR16 7 +#define FUSB300_IGER5_EEP_STL_INT(n) (1 << n) + +/* WORD 0 Data Structure of PRD Table */ +#define FUSB300_EPPRD0_M (1 << 30) +#define FUSB300_EPPRD0_O (1 << 29) +/* The finished prd */ +#define FUSB300_EPPRD0_F (1 << 28) +#define FUSB300_EPPRD0_I (1 << 27) +#define FUSB300_EPPRD0_A (1 << 26) +/* To decide HW point to first prd at next time */ +#define FUSB300_EPPRD0_L (1 << 25) +#define FUSB300_EPPRD0_H (1 << 24) +#define FUSB300_EPPRD0_BTC(n) (n & 0xFFFFFF) + +/*----------------------------------------------------------------------*/ +#define FUSB300_MAX_NUM_EP 16 + +#define FUSB300_FIFO_ENTRY_NUM 8 +#define FUSB300_MAX_FIFO_ENTRY 8 + +#define SS_CTL_MAX_PACKET_SIZE 0x200 +#define SS_BULK_MAX_PACKET_SIZE 0x400 +#define SS_INT_MAX_PACKET_SIZE 0x400 +#define SS_ISO_MAX_PACKET_SIZE 0x400 + +#define HS_BULK_MAX_PACKET_SIZE 0x200 +#define HS_CTL_MAX_PACKET_SIZE 0x40 +#define HS_INT_MAX_PACKET_SIZE 0x400 +#define HS_ISO_MAX_PACKET_SIZE 0x400 + +struct fusb300_ep_info { + u8 epnum; + u8 type; + u8 interval; + u8 dir_in; + u16 maxpacket; + u16 addrofs; + u16 bw_num; +}; + +struct fusb300_request { + + struct usb_request req; + struct list_head queue; +}; + + +struct fusb300_ep { + struct usb_ep ep; + struct fusb300 *fusb300; + + struct list_head queue; + unsigned stall:1; + unsigned wedged:1; + unsigned use_dma:1; + + unsigned char epnum; + unsigned char type; + const struct usb_endpoint_descriptor *desc; +}; + +struct fusb300 { + spinlock_t lock; + void __iomem *reg; + + unsigned long irq_trigger; + + struct usb_gadget gadget; + struct usb_gadget_driver *driver; + + struct fusb300_ep *ep[FUSB300_MAX_NUM_EP]; + + struct usb_request *ep0_req; /* for internal request */ + __le16 ep0_data; + u32 ep0_length; /* for internal request */ + u8 ep0_dir; /* 0/0x80 out/in */ + + u8 fifo_entry_num; /* next start fifo entry */ + u32 addrofs; /* next fifo address offset */ + u8 reenum; /* if re-enumeration */ +}; + +#endif diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index 51b19f3027e7..084aa080a2d5 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -258,7 +258,7 @@ static int pipe_buffer_setting(struct m66592 *m66592, break; case M66592_BULK: /* isochronous pipes may be used as bulk pipes */ - if (info->pipe > M66592_BASE_PIPENUM_BULK) + if (info->pipe >= M66592_BASE_PIPENUM_BULK) bufnum = info->pipe - M66592_BASE_PIPENUM_BULK; else bufnum = info->pipe - M66592_BASE_PIPENUM_ISOC; diff --git a/drivers/usb/gadget/pch_udc.c b/drivers/usb/gadget/pch_udc.c index b120dbb64d0f..3e4b35e50c24 100644 --- a/drivers/usb/gadget/pch_udc.c +++ b/drivers/usb/gadget/pch_udc.c @@ -367,7 +367,6 @@ struct pch_udc_dev { static const char ep0_string[] = "ep0in"; static DEFINE_SPINLOCK(udc_stall_spinlock); /* stall spin lock */ struct pch_udc_dev *pch_udc; /* pointer to device object */ - static int speed_fs; module_param_named(speed_fs, speed_fs, bool, S_IRUGO); MODULE_PARM_DESC(speed_fs, "true for Full speed operation"); @@ -383,6 +382,8 @@ MODULE_PARM_DESC(speed_fs, "true for Full speed operation"); * @dma_mapped: DMA memory mapped for request * @dma_done: DMA completed for request * @chain_len: chain length + * @buf: Buffer memory for align adjustment + * @dma: DMA memory for align adjustment */ struct pch_udc_request { struct usb_request req; @@ -394,6 +395,8 @@ struct pch_udc_request { dma_mapped:1, dma_done:1; unsigned chain_len; + void *buf; + dma_addr_t dma; }; static inline u32 pch_udc_readl(struct pch_udc_dev *dev, unsigned long reg) @@ -615,7 +618,7 @@ static inline void pch_udc_ep_set_trfr_type(struct pch_udc_ep *ep, /** * pch_udc_ep_set_bufsz() - Set the maximum packet size for the endpoint * @ep: Reference to structure of type pch_udc_ep_regs - * @buf_size: The buffer size + * @buf_size: The buffer word size */ static void pch_udc_ep_set_bufsz(struct pch_udc_ep *ep, u32 buf_size, u32 ep_in) @@ -635,7 +638,7 @@ static void pch_udc_ep_set_bufsz(struct pch_udc_ep *ep, /** * pch_udc_ep_set_maxpkt() - Set the Max packet size for the endpoint * @ep: Reference to structure of type pch_udc_ep_regs - * @pkt_size: The packet size + * @pkt_size: The packet byte size */ static void pch_udc_ep_set_maxpkt(struct pch_udc_ep *ep, u32 pkt_size) { @@ -920,25 +923,10 @@ static void pch_udc_ep_clear_nak(struct pch_udc_ep *ep) */ static void pch_udc_ep_fifo_flush(struct pch_udc_ep *ep, int dir) { - unsigned int loopcnt = 0; - struct pch_udc_dev *dev = ep->dev; - if (dir) { /* IN ep */ pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_F); return; } - - if (pch_udc_read_ep_status(ep) & UDC_EPSTS_MRXFIFO_EMP) - return; - pch_udc_ep_bit_set(ep, UDC_EPCTL_ADDR, UDC_EPCTL_MRXFLUSH); - /* Wait for RxFIFO Empty */ - loopcnt = 10000; - while (!(pch_udc_read_ep_status(ep) & UDC_EPSTS_MRXFIFO_EMP) && - --loopcnt) - udelay(5); - if (!loopcnt) - dev_err(&dev->pdev->dev, "RxFIFO not Empty\n"); - pch_udc_ep_bit_clr(ep, UDC_EPCTL_ADDR, UDC_EPCTL_MRXFLUSH); } /** @@ -1220,14 +1208,31 @@ static void complete_req(struct pch_udc_ep *ep, struct pch_udc_request *req, dev = ep->dev; if (req->dma_mapped) { - if (ep->in) - dma_unmap_single(&dev->pdev->dev, req->req.dma, - req->req.length, DMA_TO_DEVICE); - else - dma_unmap_single(&dev->pdev->dev, req->req.dma, - req->req.length, DMA_FROM_DEVICE); + if (req->dma == DMA_ADDR_INVALID) { + if (ep->in) + dma_unmap_single(&dev->pdev->dev, req->req.dma, + req->req.length, + DMA_TO_DEVICE); + else + dma_unmap_single(&dev->pdev->dev, req->req.dma, + req->req.length, + DMA_FROM_DEVICE); + req->req.dma = DMA_ADDR_INVALID; + } else { + if (ep->in) + dma_unmap_single(&dev->pdev->dev, req->dma, + req->req.length, + DMA_TO_DEVICE); + else { + dma_unmap_single(&dev->pdev->dev, req->dma, + req->req.length, + DMA_FROM_DEVICE); + memcpy(req->req.buf, req->buf, req->req.length); + } + kfree(req->buf); + req->dma = DMA_ADDR_INVALID; + } req->dma_mapped = 0; - req->req.dma = DMA_ADDR_INVALID; } ep->halted = 1; spin_unlock(&dev->lock); @@ -1268,12 +1273,18 @@ static void pch_udc_free_dma_chain(struct pch_udc_dev *dev, struct pch_udc_data_dma_desc *td = req->td_data; unsigned i = req->chain_len; + dma_addr_t addr2; + dma_addr_t addr = (dma_addr_t)td->next; + td->next = 0x00; for (; i > 1; --i) { - dma_addr_t addr = (dma_addr_t)td->next; /* do not free first desc., will be done by free for request */ td = phys_to_virt(addr); + addr2 = (dma_addr_t)td->next; pci_pool_free(dev->data_requests, td, addr); + td->next = 0x00; + addr = addr2; } + req->chain_len = 1; } /** @@ -1301,23 +1312,23 @@ static int pch_udc_create_dma_chain(struct pch_udc_ep *ep, if (req->chain_len > 1) pch_udc_free_dma_chain(ep->dev, req); - for (; ; bytes -= buf_len, ++len) { - if (ep->in) - td->status = PCH_UDC_BS_HST_BSY | min(buf_len, bytes); - else - td->status = PCH_UDC_BS_HST_BSY; + if (req->dma == DMA_ADDR_INVALID) + td->dataptr = req->req.dma; + else + td->dataptr = req->dma; + td->status = PCH_UDC_BS_HST_BSY; + for (; ; bytes -= buf_len, ++len) { + td->status = PCH_UDC_BS_HST_BSY | min(buf_len, bytes); if (bytes <= buf_len) break; - last = td; td = pci_pool_alloc(ep->dev->data_requests, gfp_flags, &dma_addr); if (!td) goto nomem; - i += buf_len; - td->dataptr = req->req.dma + i; + td->dataptr = req->td_data->dataptr + i; last->next = dma_addr; } @@ -1352,28 +1363,15 @@ static int prepare_dma(struct pch_udc_ep *ep, struct pch_udc_request *req, { int retval; - req->td_data->dataptr = req->req.dma; - req->td_data->status |= PCH_UDC_DMA_LAST; /* Allocate and create a DMA chain */ retval = pch_udc_create_dma_chain(ep, req, ep->ep.maxpacket, gfp); if (retval) { - pr_err("%s: could not create DMA chain: %d\n", - __func__, retval); + pr_err("%s: could not create DMA chain:%d\n", __func__, retval); return retval; } - if (!ep->in) - return 0; - if (req->req.length <= ep->ep.maxpacket) - req->td_data->status = PCH_UDC_DMA_LAST | PCH_UDC_BS_HST_BSY | - req->req.length; - /* if bytes < max packet then tx bytes must - * be written in packet per buffer mode - */ - if ((req->req.length < ep->ep.maxpacket) || !ep->num) + if (ep->in) req->td_data->status = (req->td_data->status & - ~PCH_UDC_RXTX_BYTES) | req->req.length; - req->td_data->status = (req->td_data->status & - ~PCH_UDC_BUFF_STS) | PCH_UDC_BS_HST_BSY; + ~PCH_UDC_BUFF_STS) | PCH_UDC_BS_HST_RDY; return 0; } @@ -1529,6 +1527,7 @@ static struct usb_request *pch_udc_alloc_request(struct usb_ep *usbep, if (!req) return NULL; req->req.dma = DMA_ADDR_INVALID; + req->dma = DMA_ADDR_INVALID; INIT_LIST_HEAD(&req->queue); if (!ep->dev->dma_addr) return &req->req; @@ -1613,16 +1612,33 @@ static int pch_udc_pcd_queue(struct usb_ep *usbep, struct usb_request *usbreq, /* map the buffer for dma */ if (usbreq->length && ((usbreq->dma == DMA_ADDR_INVALID) || !usbreq->dma)) { - if (ep->in) - usbreq->dma = dma_map_single(&dev->pdev->dev, - usbreq->buf, - usbreq->length, - DMA_TO_DEVICE); - else - usbreq->dma = dma_map_single(&dev->pdev->dev, - usbreq->buf, - usbreq->length, - DMA_FROM_DEVICE); + if (!((unsigned long)(usbreq->buf) & 0x03)) { + if (ep->in) + usbreq->dma = dma_map_single(&dev->pdev->dev, + usbreq->buf, + usbreq->length, + DMA_TO_DEVICE); + else + usbreq->dma = dma_map_single(&dev->pdev->dev, + usbreq->buf, + usbreq->length, + DMA_FROM_DEVICE); + } else { + req->buf = kzalloc(usbreq->length, GFP_ATOMIC); + if (!req->buf) + return -ENOMEM; + if (ep->in) { + memcpy(req->buf, usbreq->buf, usbreq->length); + req->dma = dma_map_single(&dev->pdev->dev, + req->buf, + usbreq->length, + DMA_TO_DEVICE); + } else + req->dma = dma_map_single(&dev->pdev->dev, + req->buf, + usbreq->length, + DMA_FROM_DEVICE); + } req->dma_mapped = 1; } if (usbreq->length > 0) { @@ -1920,32 +1936,46 @@ static void pch_udc_complete_receiver(struct pch_udc_ep *ep) struct pch_udc_request *req; struct pch_udc_dev *dev = ep->dev; unsigned int count; + struct pch_udc_data_dma_desc *td; + dma_addr_t addr; if (list_empty(&ep->queue)) return; - /* next request */ req = list_entry(ep->queue.next, struct pch_udc_request, queue); - if ((req->td_data_last->status & PCH_UDC_BUFF_STS) != - PCH_UDC_BS_DMA_DONE) - return; pch_udc_clear_dma(ep->dev, DMA_DIR_RX); pch_udc_ep_set_ddptr(ep, 0); - if ((req->td_data_last->status & PCH_UDC_RXTX_STS) != - PCH_UDC_RTS_SUCC) { - dev_err(&dev->pdev->dev, "Invalid RXTX status (0x%08x) " - "epstatus=0x%08x\n", - (req->td_data_last->status & PCH_UDC_RXTX_STS), - (int)(ep->epsts)); - return; - } - count = req->td_data_last->status & PCH_UDC_RXTX_BYTES; + if ((req->td_data_last->status & PCH_UDC_BUFF_STS) == + PCH_UDC_BS_DMA_DONE) + td = req->td_data_last; + else + td = req->td_data; + while (1) { + if ((td->status & PCH_UDC_RXTX_STS) != PCH_UDC_RTS_SUCC) { + dev_err(&dev->pdev->dev, "Invalid RXTX status=0x%08x " + "epstatus=0x%08x\n", + (req->td_data->status & PCH_UDC_RXTX_STS), + (int)(ep->epsts)); + return; + } + if ((td->status & PCH_UDC_BUFF_STS) == PCH_UDC_BS_DMA_DONE) + if (td->status | PCH_UDC_DMA_LAST) { + count = td->status & PCH_UDC_RXTX_BYTES; + break; + } + if (td == req->td_data_last) { + dev_err(&dev->pdev->dev, "Not complete RX descriptor"); + return; + } + addr = (dma_addr_t)td->next; + td = phys_to_virt(addr); + } /* on 64k packets the RXBYTES field is zero */ if (!count && (req->req.length == UDC_DMA_MAXPACKET)) count = UDC_DMA_MAXPACKET; req->td_data->status |= PCH_UDC_DMA_LAST; - req->td_data_last->status |= PCH_UDC_BS_HST_BSY; + td->status |= PCH_UDC_BS_HST_BSY; req->dma_going = 0; req->req.actual = count; diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index c2448950a8d8..6d8b04061d5d 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -902,7 +902,7 @@ static irqreturn_t s3c2410_udc_irq(int dummy, void *_dev) int pwr_reg; int ep0csr; int i; - u32 idx; + u32 idx, idx2; unsigned long flags; spin_lock_irqsave(&dev->lock, flags); @@ -1017,6 +1017,20 @@ static irqreturn_t s3c2410_udc_irq(int dummy, void *_dev) } } + /* what else causes this interrupt? a receive! who is it? */ + if (!usb_status && !usbd_status && !pwr_reg && !ep0csr) { + for (i = 1; i < S3C2410_ENDPOINTS; i++) { + idx2 = udc_read(S3C2410_UDC_INDEX_REG); + udc_write(i, S3C2410_UDC_INDEX_REG); + + if (udc_read(S3C2410_UDC_OUT_CSR1_REG) & 0x1) + s3c2410_udc_handle_ep(&dev->ep[i]); + + /* restore index */ + udc_write(idx2, S3C2410_UDC_INDEX_REG); + } + } + dprintk(DEBUG_VERBOSE, "irq: %d s3c2410_udc_done.\n", IRQ_USBD); /* Restore old index */ @@ -1467,7 +1481,9 @@ static int s3c2410_udc_set_pullup(struct s3c2410_udc *udc, int is_on) { dprintk(DEBUG_NORMAL, "%s()\n", __func__); - if (udc_info && udc_info->udc_command) { + if (udc_info && (udc_info->udc_command || + gpio_is_valid(udc_info->pullup_pin))) { + if (is_on) s3c2410_udc_enable(udc); else { @@ -1544,6 +1560,32 @@ static const struct usb_gadget_ops s3c2410_ops = { .vbus_draw = s3c2410_vbus_draw, }; +static void s3c2410_udc_command(enum s3c2410_udc_cmd_e cmd) +{ + if (!udc_info) + return; + + if (udc_info->udc_command) { + udc_info->udc_command(S3C2410_UDC_P_DISABLE); + } else if (gpio_is_valid(udc_info->pullup_pin)) { + int value; + + switch (cmd) { + case S3C2410_UDC_P_ENABLE: + value = 1; + break; + case S3C2410_UDC_P_DISABLE: + value = 0; + break; + default: + return; + } + value ^= udc_info->pullup_pin_inverted; + + gpio_set_value(udc_info->pullup_pin, value); + } +} + /*------------------------- gadget driver handling---------------------------*/ /* * s3c2410_udc_disable @@ -1565,8 +1607,7 @@ static void s3c2410_udc_disable(struct s3c2410_udc *dev) udc_write(0x1F, S3C2410_UDC_EP_INT_REG); /* Good bye, cruel world */ - if (udc_info && udc_info->udc_command) - udc_info->udc_command(S3C2410_UDC_P_DISABLE); + s3c2410_udc_command(S3C2410_UDC_P_DISABLE); /* Set speed to unknown */ dev->gadget.speed = USB_SPEED_UNKNOWN; @@ -1627,8 +1668,7 @@ static void s3c2410_udc_enable(struct s3c2410_udc *dev) udc_write(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_EN_REG); /* time to say "hello, world" */ - if (udc_info && udc_info->udc_command) - udc_info->udc_command(S3C2410_UDC_P_ENABLE); + s3c2410_udc_command(S3C2410_UDC_P_ENABLE); } /* @@ -1903,6 +1943,17 @@ static int s3c2410_udc_probe(struct platform_device *pdev) udc->vbus = 1; } + if (udc_info && !udc_info->udc_command && + gpio_is_valid(udc_info->pullup_pin)) { + + retval = gpio_request_one(udc_info->pullup_pin, + udc_info->vbus_pin_inverted ? + GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, + "udc pullup"); + if (retval) + goto err_vbus_irq; + } + if (s3c2410_udc_debugfs_root) { udc->regs_info = debugfs_create_file("registers", S_IRUGO, s3c2410_udc_debugfs_root, @@ -1915,6 +1966,9 @@ static int s3c2410_udc_probe(struct platform_device *pdev) return 0; +err_vbus_irq: + if (udc_info && udc_info->vbus_pin > 0) + free_irq(gpio_to_irq(udc_info->vbus_pin), udc); err_gpio_claim: if (udc_info && udc_info->vbus_pin > 0) gpio_free(udc_info->vbus_pin); @@ -1942,6 +1996,10 @@ static int s3c2410_udc_remove(struct platform_device *pdev) debugfs_remove(udc->regs_info); + if (udc_info && !udc_info->udc_command && + gpio_is_valid(udc_info->pullup_pin)) + gpio_free(udc_info->pullup_pin); + if (udc_info && udc_info->vbus_pin > 0) { irq = gpio_to_irq(udc_info->vbus_pin); free_irq(irq, udc); @@ -1973,16 +2031,14 @@ static int s3c2410_udc_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int s3c2410_udc_suspend(struct platform_device *pdev, pm_message_t message) { - if (udc_info && udc_info->udc_command) - udc_info->udc_command(S3C2410_UDC_P_DISABLE); + s3c2410_udc_command(S3C2410_UDC_P_DISABLE); return 0; } static int s3c2410_udc_resume(struct platform_device *pdev) { - if (udc_info && udc_info->udc_command) - udc_info->udc_command(S3C2410_UDC_P_ENABLE); + s3c2410_udc_command(S3C2410_UDC_P_ENABLE); return 0; } diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index 1eda968b5644..2ac1d2147325 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -241,7 +241,7 @@ rx_submit(struct eth_dev *dev, struct usb_request *req, gfp_t gfp_flags) size -= size % out->maxpacket; if (dev->port_usb->is_fixed) - size = max(size, dev->port_usb->fixed_out_len); + size = max_t(size_t, size, dev->port_usb->fixed_out_len); skb = alloc_skb(size + NET_IP_ALIGN, gfp_flags); if (skb == NULL) { diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 0e6afa260ed8..9483acdf2e9e 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -91,17 +91,28 @@ config USB_EHCI_TT_NEWSCHED If unsure, say Y. +config USB_EHCI_HCD_PMC_MSP + tristate "EHCI support for on-chip PMC MSP71xx USB controller" + depends on USB_EHCI_HCD && MSP_HAS_USB + default n + select USB_EHCI_BIG_ENDIAN_DESC + select USB_EHCI_BIG_ENDIAN_MMIO + ---help--- + Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's. + If unsure, say N. + config USB_EHCI_BIG_ENDIAN_MMIO bool depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || \ ARCH_IXP4XX || XPS_USB_HCD_XILINX || \ - PPC_MPC512x || CPU_CAVIUM_OCTEON) + PPC_MPC512x || CPU_CAVIUM_OCTEON || \ + PMC_MSP) default y config USB_EHCI_BIG_ENDIAN_DESC bool depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || XPS_USB_HCD_XILINX || \ - PPC_MPC512x) + PPC_MPC512x || PMC_MSP) default y config XPS_USB_HCD_XILINX @@ -145,7 +156,7 @@ config USB_EHCI_MSM bool "Support for MSM on-chip EHCI USB controller" depends on USB_EHCI_HCD && ARCH_MSM select USB_EHCI_ROOT_HUB_TT - select USB_MSM_OTG_72K + select USB_MSM_OTG ---help--- Enables support for the USB Host controller present on the Qualcomm chipsets. Root Hub has inbuilt TT. @@ -154,6 +165,14 @@ config USB_EHCI_MSM This driver is not supported on boards like trout which has an external PHY. +config USB_EHCI_TEGRA + boolean "NVIDIA Tegra HCD support" + depends on USB_EHCI_HCD && ARCH_TEGRA + select USB_EHCI_ROOT_HUB_TT + help + This driver enables support for the internal USB Host Controllers + found in NVIDIA Tegra SoCs. The controllers are EHCI compliant. + config USB_EHCI_HCD_PPC_OF bool "EHCI support for PPC USB controller on OF platform bus" depends on USB_EHCI_HCD && PPC_OF @@ -162,6 +181,13 @@ config USB_EHCI_HCD_PPC_OF Enables support for the USB controller present on the PowerPC OpenFirmware platform bus. +config USB_EHCI_SH + bool "EHCI support for SuperH USB controller" + depends on USB_EHCI_HCD && SUPERH + ---help--- + Enables support for the on-chip EHCI controller on the SuperH. + If you use the PCI EHCI controller, this option is not necessary. + config USB_W90X900_EHCI bool "W90X900(W90P910) EHCI support" depends on USB_EHCI_HCD && ARCH_W90X900 @@ -315,6 +341,13 @@ config USB_OHCI_HCD_SSB If unsure, say N. +config USB_OHCI_SH + bool "OHCI support for SuperH USB controller" + depends on USB_OHCI_HCD && SUPERH + ---help--- + Enables support for the on-chip OHCI controller on the SuperH. + If you use the PCI OHCI controller, this option is not necessary. + config USB_CNS3XXX_OHCI bool "Cavium CNS3XXX OHCI Module" depends on USB_OHCI_HCD && ARCH_CNS3XXX diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index d6a69d514a84..b2ed55cb811d 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -115,7 +115,7 @@ static const struct hc_driver ehci_atmel_hc_driver = { .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; -static int __init ehci_atmel_drv_probe(struct platform_device *pdev) +static int __devinit ehci_atmel_drv_probe(struct platform_device *pdev) { struct usb_hcd *hcd; const struct hc_driver *driver = &ehci_atmel_hc_driver; @@ -207,7 +207,7 @@ fail_create_hcd: return retval; } -static int __exit ehci_atmel_drv_remove(struct platform_device *pdev) +static int __devexit ehci_atmel_drv_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); @@ -227,7 +227,7 @@ static int __exit ehci_atmel_drv_remove(struct platform_device *pdev) static struct platform_driver ehci_atmel_driver = { .probe = ehci_atmel_drv_probe, - .remove = __exit_p(ehci_atmel_drv_remove), + .remove = __devexit_p(ehci_atmel_drv_remove), .shutdown = usb_hcd_platform_shutdown, .driver.name = "atmel-ehci", }; diff --git a/drivers/usb/host/ehci-dbg.c b/drivers/usb/host/ehci-dbg.c index 3be238a24cc5..693c29b30521 100644 --- a/drivers/usb/host/ehci-dbg.c +++ b/drivers/usb/host/ehci-dbg.c @@ -28,11 +28,9 @@ dev_warn (ehci_to_hcd(ehci)->self.controller , fmt , ## args ) #ifdef VERBOSE_DEBUG -# define vdbg dbg # define ehci_vdbg ehci_dbg #else -# define vdbg(fmt,args...) do { } while (0) -# define ehci_vdbg(ehci, fmt, args...) do { } while (0) + static inline void ehci_vdbg(struct ehci_hcd *ehci, ...) {} #endif #ifdef DEBUG diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 74dcf49bd015..d30c4e08c137 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -114,13 +114,11 @@ MODULE_PARM_DESC(hird, "host initiated resume duration, +1 for each 75us\n"); #define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT) -/* for ASPM quirk of ISOC on AMD SB800 */ -static struct pci_dev *amd_nb_dev; - /*-------------------------------------------------------------------------*/ #include "ehci.h" #include "ehci-dbg.c" +#include "pci-quirks.h" /*-------------------------------------------------------------------------*/ @@ -532,10 +530,8 @@ static void ehci_stop (struct usb_hcd *hcd) spin_unlock_irq (&ehci->lock); ehci_mem_cleanup (ehci); - if (amd_nb_dev) { - pci_dev_put(amd_nb_dev); - amd_nb_dev = NULL; - } + if (ehci->amd_pll_fix == 1) + usb_amd_dev_put(); #ifdef EHCI_STATS ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n", @@ -679,7 +675,12 @@ static int ehci_run (struct usb_hcd *hcd) hcd->uses_new_polling = 1; /* EHCI spec section 4.1 */ - if ((retval = ehci_reset(ehci)) != 0) { + /* + * TDI driver does the ehci_reset in their reset callback. + * Don't reset here, because configuration settings will + * vanish. + */ + if (!ehci_is_TDI(ehci) && (retval = ehci_reset(ehci)) != 0) { ehci_mem_cleanup(ehci); return retval; } @@ -1179,7 +1180,7 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_mxc_driver #endif -#ifdef CONFIG_CPU_SUBTYPE_SH7786 +#ifdef CONFIG_USB_EHCI_SH #include "ehci-sh.c" #define PLATFORM_DRIVER ehci_hcd_sh_driver #endif @@ -1254,6 +1255,16 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_msm_driver #endif +#ifdef CONFIG_USB_EHCI_HCD_PMC_MSP +#include "ehci-pmcmsp.c" +#define PLATFORM_DRIVER ehci_hcd_msp_driver +#endif + +#ifdef CONFIG_USB_EHCI_TEGRA +#include "ehci-tegra.c" +#define PLATFORM_DRIVER tegra_ehci_driver +#endif + #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \ !defined(XILINX_OF_PLATFORM_DRIVER) diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 8a515f0d5988..d05ea03cfb4d 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -106,6 +106,27 @@ static void ehci_handover_companion_ports(struct ehci_hcd *ehci) ehci->owned_ports = 0; } +static int ehci_port_change(struct ehci_hcd *ehci) +{ + int i = HCS_N_PORTS(ehci->hcs_params); + + /* First check if the controller indicates a change event */ + + if (ehci_readl(ehci, &ehci->regs->status) & STS_PCD) + return 1; + + /* + * Not all controllers appear to update this while going from D3 to D0, + * so check the individual port status registers as well + */ + + while (i--) + if (ehci_readl(ehci, &ehci->regs->port_status[i]) & PORT_CSC) + return 1; + + return 0; +} + static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, bool suspending, bool do_wakeup) { @@ -173,7 +194,7 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci, } /* Does the root hub have a port wakeup pending? */ - if (!suspending && (ehci_readl(ehci, &ehci->regs->status) & STS_PCD)) + if (!suspending && ehci_port_change(ehci)) usb_hcd_resume_root_hub(ehci_to_hcd(ehci)); spin_unlock_irqrestore(&ehci->lock, flags); @@ -538,14 +559,15 @@ static ssize_t store_companion(struct device *dev, } static DEVICE_ATTR(companion, 0644, show_companion, store_companion); -static inline void create_companion_file(struct ehci_hcd *ehci) +static inline int create_companion_file(struct ehci_hcd *ehci) { - int i; + int i = 0; /* with integrated TT there is no companion! */ if (!ehci_is_TDI(ehci)) i = device_create_file(ehci_to_hcd(ehci)->self.controller, &dev_attr_companion); + return i; } static inline void remove_companion_file(struct ehci_hcd *ehci) @@ -695,8 +717,8 @@ ehci_hub_descriptor ( desc->bDescLength = 7 + 2 * temp; /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */ - memset (&desc->bitmap [0], 0, temp); - memset (&desc->bitmap [temp], 0xff, temp); + memset(&desc->u.hs.DeviceRemovable[0], 0, temp); + memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp); temp = 0x0008; /* per-port overcurrent reporting */ if (HCS_PPC (ehci->hcs_params)) diff --git a/drivers/usb/host/ehci-lpm.c b/drivers/usb/host/ehci-lpm.c index b4d4d63c13ed..2111627a19de 100644 --- a/drivers/usb/host/ehci-lpm.c +++ b/drivers/usb/host/ehci-lpm.c @@ -17,7 +17,8 @@ */ /* this file is part of ehci-hcd.c */ -static int ehci_lpm_set_da(struct ehci_hcd *ehci, int dev_addr, int port_num) +static int __maybe_unused ehci_lpm_set_da(struct ehci_hcd *ehci, + int dev_addr, int port_num) { u32 __iomem portsc; @@ -37,7 +38,7 @@ static int ehci_lpm_set_da(struct ehci_hcd *ehci, int dev_addr, int port_num) * this function is used to check if the device support LPM * if yes, mark the PORTSC register with PORT_LPM bit */ -static int ehci_lpm_check(struct ehci_hcd *ehci, int port) +static int __maybe_unused ehci_lpm_check(struct ehci_hcd *ehci, int port) { u32 __iomem *portsc ; u32 val32; diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c index 413f4deca532..9ce1b0bc186d 100644 --- a/drivers/usb/host/ehci-msm.c +++ b/drivers/usb/host/ehci-msm.c @@ -1,6 +1,6 @@ /* ehci-msm.c - HSUSB Host Controller Driver Implementation * - * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved. + * Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved. * * Partly derived from ehci-fsl.c and ehci-hcd.c * Copyright (c) 2000-2004 by David Brownell @@ -34,92 +34,6 @@ static struct otg_transceiver *otg; -/* - * ehci_run defined in drivers/usb/host/ehci-hcd.c reset the controller and - * the configuration settings in ehci_msm_reset vanish after controller is - * reset. Resetting the controler in ehci_run seems to be un-necessary - * provided HCD reset the controller before calling ehci_run. Most of the HCD - * do but some are not. So this function is same as ehci_run but we don't - * reset the controller here. - */ -static int ehci_msm_run(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - u32 temp; - u32 hcc_params; - - hcd->uses_new_polling = 1; - - ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list); - ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next); - - /* - * hcc_params controls whether ehci->regs->segment must (!!!) - * be used; it constrains QH/ITD/SITD and QTD locations. - * pci_pool consistent memory always uses segment zero. - * streaming mappings for I/O buffers, like pci_map_single(), - * can return segments above 4GB, if the device allows. - * - * NOTE: the dma mask is visible through dma_supported(), so - * drivers can pass this info along ... like NETIF_F_HIGHDMA, - * Scsi_Host.highmem_io, and so forth. It's readonly to all - * host side drivers though. - */ - hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params); - if (HCC_64BIT_ADDR(hcc_params)) - ehci_writel(ehci, 0, &ehci->regs->segment); - - /* - * Philips, Intel, and maybe others need CMD_RUN before the - * root hub will detect new devices (why?); NEC doesn't - */ - ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET); - ehci->command |= CMD_RUN; - ehci_writel(ehci, ehci->command, &ehci->regs->command); - dbg_cmd(ehci, "init", ehci->command); - - /* - * Start, enabling full USB 2.0 functionality ... usb 1.1 devices - * are explicitly handed to companion controller(s), so no TT is - * involved with the root hub. (Except where one is integrated, - * and there's no companion controller unless maybe for USB OTG.) - * - * Turning on the CF flag will transfer ownership of all ports - * from the companions to the EHCI controller. If any of the - * companions are in the middle of a port reset at the time, it - * could cause trouble. Write-locking ehci_cf_port_reset_rwsem - * guarantees that no resets are in progress. After we set CF, - * a short delay lets the hardware catch up; new resets shouldn't - * be started before the port switching actions could complete. - */ - down_write(&ehci_cf_port_reset_rwsem); - hcd->state = HC_STATE_RUNNING; - ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); - ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ - usleep_range(5000, 5500); - up_write(&ehci_cf_port_reset_rwsem); - ehci->last_periodic_enable = ktime_get_real(); - - temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase)); - ehci_info(ehci, - "USB %x.%x started, EHCI %x.%02x%s\n", - ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f), - temp >> 8, temp & 0xff, - ignore_oc ? ", overcurrent ignored" : ""); - - ehci_writel(ehci, INTR_MASK, - &ehci->regs->intr_enable); /* Turn On Interrupts */ - - /* GRR this is run-once init(), being done every time the HC starts. - * So long as they're part of class devices, we can't do it init() - * since the class device isn't created that early. - */ - create_debug_files(ehci); - create_companion_file(ehci); - - return 0; -} - static int ehci_msm_reset(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); @@ -128,6 +42,8 @@ static int ehci_msm_reset(struct usb_hcd *hcd) ehci->caps = USB_CAPLENGTH; ehci->regs = USB_CAPLENGTH + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); + dbg_hcs_params(ehci, "reset"); + dbg_hcc_params(ehci, "reset"); /* cache the data to minimize the chip reads*/ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); @@ -135,6 +51,10 @@ static int ehci_msm_reset(struct usb_hcd *hcd) hcd->has_tt = 1; ehci->sbrn = HCD_USB2; + retval = ehci_halt(ehci); + if (retval) + return retval; + /* data structure init */ retval = ehci_init(hcd); if (retval) @@ -167,7 +87,7 @@ static struct hc_driver msm_hc_driver = { .flags = HCD_USB2 | HCD_MEMORY, .reset = ehci_msm_reset, - .start = ehci_msm_run, + .start = ehci_run, .stop = ehci_stop, .shutdown = ehci_shutdown, diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index f784ceb862a3..7e41a95c5ceb 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -4,9 +4,10 @@ * Bus Glue for the EHCI controllers in OMAP3/4 * Tested on several OMAP3 boards, and OMAP4 Pandaboard * - * Copyright (C) 2007-2010 Texas Instruments, Inc. + * Copyright (C) 2007-2011 Texas Instruments, Inc. * Author: Vikram Pandita <vikram.pandita@ti.com> * Author: Anand Gadiyar <gadiyar@ti.com> + * Author: Keshava Munegowda <keshava_mgowda@ti.com> * * Copyright (C) 2009 Nokia Corporation * Contact: Felipe Balbi <felipe.balbi@nokia.com> @@ -27,116 +28,19 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * - * TODO (last updated Nov 21, 2010): + * TODO (last updated Feb 27, 2010): * - add kernel-doc * - enable AUTOIDLE * - add suspend/resume - * - move workarounds to board-files - * - factor out code common to OHCI * - add HSIC and TLL support * - convert to use hwmod and runtime PM */ #include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/gpio.h> -#include <linux/regulator/consumer.h> #include <linux/slab.h> #include <linux/usb/ulpi.h> #include <plat/usb.h> -/* - * OMAP USBHOST Register addresses: VIRTUAL ADDRESSES - * Use ehci_omap_readl()/ehci_omap_writel() functions - */ - -/* TLL Register Set */ -#define OMAP_USBTLL_REVISION (0x00) -#define OMAP_USBTLL_SYSCONFIG (0x10) -#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8) -#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3) -#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2) -#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1) -#define OMAP_USBTLL_SYSCONFIG_AUTOIDLE (1 << 0) - -#define OMAP_USBTLL_SYSSTATUS (0x14) -#define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0) - -#define OMAP_USBTLL_IRQSTATUS (0x18) -#define OMAP_USBTLL_IRQENABLE (0x1C) - -#define OMAP_TLL_SHARED_CONF (0x30) -#define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN (1 << 6) -#define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN (1 << 5) -#define OMAP_TLL_SHARED_CONF_USB_DIVRATION (1 << 2) -#define OMAP_TLL_SHARED_CONF_FCLK_REQ (1 << 1) -#define OMAP_TLL_SHARED_CONF_FCLK_IS_ON (1 << 0) - -#define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num) -#define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11) -#define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10) -#define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9) -#define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8) -#define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0) - -#define OMAP_TLL_ULPI_FUNCTION_CTRL(num) (0x804 + 0x100 * num) -#define OMAP_TLL_ULPI_INTERFACE_CTRL(num) (0x807 + 0x100 * num) -#define OMAP_TLL_ULPI_OTG_CTRL(num) (0x80A + 0x100 * num) -#define OMAP_TLL_ULPI_INT_EN_RISE(num) (0x80D + 0x100 * num) -#define OMAP_TLL_ULPI_INT_EN_FALL(num) (0x810 + 0x100 * num) -#define OMAP_TLL_ULPI_INT_STATUS(num) (0x813 + 0x100 * num) -#define OMAP_TLL_ULPI_INT_LATCH(num) (0x814 + 0x100 * num) -#define OMAP_TLL_ULPI_DEBUG(num) (0x815 + 0x100 * num) -#define OMAP_TLL_ULPI_SCRATCH_REGISTER(num) (0x816 + 0x100 * num) - -#define OMAP_TLL_CHANNEL_COUNT 3 -#define OMAP_TLL_CHANNEL_1_EN_MASK (1 << 0) -#define OMAP_TLL_CHANNEL_2_EN_MASK (1 << 1) -#define OMAP_TLL_CHANNEL_3_EN_MASK (1 << 2) - -/* UHH Register Set */ -#define OMAP_UHH_REVISION (0x00) -#define OMAP_UHH_SYSCONFIG (0x10) -#define OMAP_UHH_SYSCONFIG_MIDLEMODE (1 << 12) -#define OMAP_UHH_SYSCONFIG_CACTIVITY (1 << 8) -#define OMAP_UHH_SYSCONFIG_SIDLEMODE (1 << 3) -#define OMAP_UHH_SYSCONFIG_ENAWAKEUP (1 << 2) -#define OMAP_UHH_SYSCONFIG_SOFTRESET (1 << 1) -#define OMAP_UHH_SYSCONFIG_AUTOIDLE (1 << 0) - -#define OMAP_UHH_SYSSTATUS (0x14) -#define OMAP_UHH_HOSTCONFIG (0x40) -#define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS (1 << 0) -#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS (1 << 0) -#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11) -#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12) -#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2) -#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3) -#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4) -#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN (1 << 5) -#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS (1 << 8) -#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS (1 << 9) -#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS (1 << 10) - -/* OMAP4-specific defines */ -#define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR (3 << 2) -#define OMAP4_UHH_SYSCONFIG_NOIDLE (1 << 2) - -#define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR (3 << 4) -#define OMAP4_UHH_SYSCONFIG_NOSTDBY (1 << 4) -#define OMAP4_UHH_SYSCONFIG_SOFTRESET (1 << 0) - -#define OMAP4_P1_MODE_CLEAR (3 << 16) -#define OMAP4_P1_MODE_TLL (1 << 16) -#define OMAP4_P1_MODE_HSIC (3 << 16) -#define OMAP4_P2_MODE_CLEAR (3 << 18) -#define OMAP4_P2_MODE_TLL (1 << 18) -#define OMAP4_P2_MODE_HSIC (3 << 18) - -#define OMAP_REV2_TLL_CHANNEL_COUNT 2 - -#define OMAP_UHH_DEBUG_CSR (0x44) - /* EHCI Register Set */ #define EHCI_INSNREG04 (0xA0) #define EHCI_INSNREG04_DISABLE_UNSUSPEND (1 << 5) @@ -148,137 +52,24 @@ #define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8 #define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0 -/* Values of UHH_REVISION - Note: these are not given in the TRM */ -#define OMAP_EHCI_REV1 0x00000010 /* OMAP3 */ -#define OMAP_EHCI_REV2 0x50700100 /* OMAP4 */ - -#define is_omap_ehci_rev1(x) (x->omap_ehci_rev == OMAP_EHCI_REV1) -#define is_omap_ehci_rev2(x) (x->omap_ehci_rev == OMAP_EHCI_REV2) +/*-------------------------------------------------------------------------*/ -#define is_ehci_phy_mode(x) (x == EHCI_HCD_OMAP_MODE_PHY) -#define is_ehci_tll_mode(x) (x == EHCI_HCD_OMAP_MODE_TLL) -#define is_ehci_hsic_mode(x) (x == EHCI_HCD_OMAP_MODE_HSIC) +static const struct hc_driver ehci_omap_hc_driver; -/*-------------------------------------------------------------------------*/ -static inline void ehci_omap_writel(void __iomem *base, u32 reg, u32 val) +static inline void ehci_write(void __iomem *base, u32 reg, u32 val) { __raw_writel(val, base + reg); } -static inline u32 ehci_omap_readl(void __iomem *base, u32 reg) +static inline u32 ehci_read(void __iomem *base, u32 reg) { return __raw_readl(base + reg); } -static inline void ehci_omap_writeb(void __iomem *base, u8 reg, u8 val) -{ - __raw_writeb(val, base + reg); -} - -static inline u8 ehci_omap_readb(void __iomem *base, u8 reg) -{ - return __raw_readb(base + reg); -} - -/*-------------------------------------------------------------------------*/ - -struct ehci_hcd_omap { - struct ehci_hcd *ehci; - struct device *dev; - - struct clk *usbhost_ick; - struct clk *usbhost_hs_fck; - struct clk *usbhost_fs_fck; - struct clk *usbtll_fck; - struct clk *usbtll_ick; - struct clk *xclk60mhsp1_ck; - struct clk *xclk60mhsp2_ck; - struct clk *utmi_p1_fck; - struct clk *utmi_p2_fck; - - /* FIXME the following two workarounds are - * board specific not silicon-specific so these - * should be moved to board-file instead. - * - * Maybe someone from TI will know better which - * board is affected and needs the workarounds - * to be applied - */ - - /* gpio for resetting phy */ - int reset_gpio_port[OMAP3_HS_USB_PORTS]; - - /* phy reset workaround */ - int phy_reset; - - /* IP revision */ - u32 omap_ehci_rev; - - /* desired phy_mode: TLL, PHY */ - enum ehci_hcd_omap_mode port_mode[OMAP3_HS_USB_PORTS]; - - void __iomem *uhh_base; - void __iomem *tll_base; - void __iomem *ehci_base; - - /* Regulators for USB PHYs. - * Each PHY can have a separate regulator. - */ - struct regulator *regulator[OMAP3_HS_USB_PORTS]; -}; - -/*-------------------------------------------------------------------------*/ - -static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask, - u8 tll_channel_count) -{ - unsigned reg; - int i; - - /* Program the 3 TLL channels upfront */ - for (i = 0; i < tll_channel_count; i++) { - reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i)); - - /* Disable AutoIdle, BitStuffing and use SDR Mode */ - reg &= ~(OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE - | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF - | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE); - ehci_omap_writel(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i), reg); - } - - /* Program Common TLL register */ - reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_SHARED_CONF); - reg |= (OMAP_TLL_SHARED_CONF_FCLK_IS_ON - | OMAP_TLL_SHARED_CONF_USB_DIVRATION - | OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN); - reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN; - - ehci_omap_writel(omap->tll_base, OMAP_TLL_SHARED_CONF, reg); - - /* Enable channels now */ - for (i = 0; i < tll_channel_count; i++) { - reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i)); - - /* Enable only the reg that is needed */ - if (!(tll_channel_mask & 1<<i)) - continue; - - reg |= OMAP_TLL_CHANNEL_CONF_CHANEN; - ehci_omap_writel(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i), reg); - - ehci_omap_writeb(omap->tll_base, - OMAP_TLL_ULPI_SCRATCH_REGISTER(i), 0xbe); - dev_dbg(omap->dev, "ULPI_SCRATCH_REG[ch=%d]= 0x%02x\n", - i+1, ehci_omap_readb(omap->tll_base, - OMAP_TLL_ULPI_SCRATCH_REGISTER(i))); - } -} - -/*-------------------------------------------------------------------------*/ - -static void omap_ehci_soft_phy_reset(struct ehci_hcd_omap *omap, u8 port) +static void omap_ehci_soft_phy_reset(struct platform_device *pdev, u8 port) { + struct usb_hcd *hcd = dev_get_drvdata(&pdev->dev); unsigned long timeout = jiffies + msecs_to_jiffies(1000); unsigned reg = 0; @@ -292,266 +83,87 @@ static void omap_ehci_soft_phy_reset(struct ehci_hcd_omap *omap, u8 port) /* start ULPI access*/ | (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT); - ehci_omap_writel(omap->ehci_base, EHCI_INSNREG05_ULPI, reg); + ehci_write(hcd->regs, EHCI_INSNREG05_ULPI, reg); /* Wait for ULPI access completion */ - while ((ehci_omap_readl(omap->ehci_base, EHCI_INSNREG05_ULPI) + while ((ehci_read(hcd->regs, EHCI_INSNREG05_ULPI) & (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT))) { cpu_relax(); if (time_after(jiffies, timeout)) { - dev_dbg(omap->dev, "phy reset operation timed out\n"); + dev_dbg(&pdev->dev, "phy reset operation timed out\n"); break; } } } -/* omap_start_ehc - * - Start the TI USBHOST controller - */ -static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(1000); - u8 tll_ch_mask = 0; - unsigned reg = 0; - int ret = 0; - - dev_dbg(omap->dev, "starting TI EHCI USB Controller\n"); - /* Enable Clocks for USBHOST */ - omap->usbhost_ick = clk_get(omap->dev, "usbhost_ick"); - if (IS_ERR(omap->usbhost_ick)) { - ret = PTR_ERR(omap->usbhost_ick); - goto err_host_ick; - } - clk_enable(omap->usbhost_ick); - - omap->usbhost_hs_fck = clk_get(omap->dev, "hs_fck"); - if (IS_ERR(omap->usbhost_hs_fck)) { - ret = PTR_ERR(omap->usbhost_hs_fck); - goto err_host_120m_fck; - } - clk_enable(omap->usbhost_hs_fck); +/* configure so an HC device and id are always provided */ +/* always called with process context; sleeping is OK */ - omap->usbhost_fs_fck = clk_get(omap->dev, "fs_fck"); - if (IS_ERR(omap->usbhost_fs_fck)) { - ret = PTR_ERR(omap->usbhost_fs_fck); - goto err_host_48m_fck; - } - clk_enable(omap->usbhost_fs_fck); - - if (omap->phy_reset) { - /* Refer: ISSUE1 */ - if (gpio_is_valid(omap->reset_gpio_port[0])) { - gpio_request(omap->reset_gpio_port[0], - "USB1 PHY reset"); - gpio_direction_output(omap->reset_gpio_port[0], 0); - } +/** + * ehci_hcd_omap_probe - initialize TI-based HCDs + * + * Allocates basic resources for this USB host controller, and + * then invokes the start() method for the HCD associated with it + * through the hotplug entry's driver_data. + */ +static int ehci_hcd_omap_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ehci_hcd_omap_platform_data *pdata = dev->platform_data; + struct resource *res; + struct usb_hcd *hcd; + void __iomem *regs; + struct ehci_hcd *omap_ehci; + int ret = -ENODEV; + int irq; - if (gpio_is_valid(omap->reset_gpio_port[1])) { - gpio_request(omap->reset_gpio_port[1], - "USB2 PHY reset"); - gpio_direction_output(omap->reset_gpio_port[1], 0); - } + if (usb_disabled()) + return -ENODEV; - /* Hold the PHY in RESET for enough time till DIR is high */ - udelay(10); + if (!dev->parent) { + dev_err(dev, "Missing parent device\n"); + return -ENODEV; } - /* Configure TLL for 60Mhz clk for ULPI */ - omap->usbtll_fck = clk_get(omap->dev, "usbtll_fck"); - if (IS_ERR(omap->usbtll_fck)) { - ret = PTR_ERR(omap->usbtll_fck); - goto err_tll_fck; + irq = platform_get_irq_byname(pdev, "ehci-irq"); + if (irq < 0) { + dev_err(dev, "EHCI irq failed\n"); + return -ENODEV; } - clk_enable(omap->usbtll_fck); - omap->usbtll_ick = clk_get(omap->dev, "usbtll_ick"); - if (IS_ERR(omap->usbtll_ick)) { - ret = PTR_ERR(omap->usbtll_ick); - goto err_tll_ick; + res = platform_get_resource_byname(pdev, + IORESOURCE_MEM, "ehci"); + if (!res) { + dev_err(dev, "UHH EHCI get resource failed\n"); + return -ENODEV; } - clk_enable(omap->usbtll_ick); - - omap->omap_ehci_rev = ehci_omap_readl(omap->uhh_base, - OMAP_UHH_REVISION); - dev_dbg(omap->dev, "OMAP UHH_REVISION 0x%x\n", - omap->omap_ehci_rev); - /* - * Enable per-port clocks as needed (newer controllers only). - * - External ULPI clock for PHY mode - * - Internal clocks for TLL and HSIC modes (TODO) - */ - if (is_omap_ehci_rev2(omap)) { - switch (omap->port_mode[0]) { - case EHCI_HCD_OMAP_MODE_PHY: - omap->xclk60mhsp1_ck = clk_get(omap->dev, - "xclk60mhsp1_ck"); - if (IS_ERR(omap->xclk60mhsp1_ck)) { - ret = PTR_ERR(omap->xclk60mhsp1_ck); - dev_err(omap->dev, - "Unable to get Port1 ULPI clock\n"); - } - - omap->utmi_p1_fck = clk_get(omap->dev, - "utmi_p1_gfclk"); - if (IS_ERR(omap->utmi_p1_fck)) { - ret = PTR_ERR(omap->utmi_p1_fck); - dev_err(omap->dev, - "Unable to get utmi_p1_fck\n"); - } - - ret = clk_set_parent(omap->utmi_p1_fck, - omap->xclk60mhsp1_ck); - if (ret != 0) { - dev_err(omap->dev, - "Unable to set P1 f-clock\n"); - } - break; - case EHCI_HCD_OMAP_MODE_TLL: - /* TODO */ - default: - break; - } - switch (omap->port_mode[1]) { - case EHCI_HCD_OMAP_MODE_PHY: - omap->xclk60mhsp2_ck = clk_get(omap->dev, - "xclk60mhsp2_ck"); - if (IS_ERR(omap->xclk60mhsp2_ck)) { - ret = PTR_ERR(omap->xclk60mhsp2_ck); - dev_err(omap->dev, - "Unable to get Port2 ULPI clock\n"); - } - - omap->utmi_p2_fck = clk_get(omap->dev, - "utmi_p2_gfclk"); - if (IS_ERR(omap->utmi_p2_fck)) { - ret = PTR_ERR(omap->utmi_p2_fck); - dev_err(omap->dev, - "Unable to get utmi_p2_fck\n"); - } - - ret = clk_set_parent(omap->utmi_p2_fck, - omap->xclk60mhsp2_ck); - if (ret != 0) { - dev_err(omap->dev, - "Unable to set P2 f-clock\n"); - } - break; - case EHCI_HCD_OMAP_MODE_TLL: - /* TODO */ - default: - break; - } + regs = ioremap(res->start, resource_size(res)); + if (!regs) { + dev_err(dev, "UHH EHCI ioremap failed\n"); + return -ENOMEM; } - - /* perform TLL soft reset, and wait until reset is complete */ - ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, - OMAP_USBTLL_SYSCONFIG_SOFTRESET); - - /* Wait for TLL reset to complete */ - while (!(ehci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS) - & OMAP_USBTLL_SYSSTATUS_RESETDONE)) { - cpu_relax(); - - if (time_after(jiffies, timeout)) { - dev_dbg(omap->dev, "operation timed out\n"); - ret = -EINVAL; - goto err_sys_status; - } + hcd = usb_create_hcd(&ehci_omap_hc_driver, dev, + dev_name(dev)); + if (!hcd) { + dev_err(dev, "failed to create hcd with err %d\n", ret); + ret = -ENOMEM; + goto err_io; } - dev_dbg(omap->dev, "TLL RESET DONE\n"); - - /* (1<<3) = no idle mode only for initial debugging */ - ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, - OMAP_USBTLL_SYSCONFIG_ENAWAKEUP | - OMAP_USBTLL_SYSCONFIG_SIDLEMODE | - OMAP_USBTLL_SYSCONFIG_CACTIVITY); - - - /* Put UHH in NoIdle/NoStandby mode */ - reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSCONFIG); - if (is_omap_ehci_rev1(omap)) { - reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP - | OMAP_UHH_SYSCONFIG_SIDLEMODE - | OMAP_UHH_SYSCONFIG_CACTIVITY - | OMAP_UHH_SYSCONFIG_MIDLEMODE); - reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE; - + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + hcd->regs = regs; - } else if (is_omap_ehci_rev2(omap)) { - reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR; - reg |= OMAP4_UHH_SYSCONFIG_NOIDLE; - reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR; - reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY; - } - ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg); - - reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG); - - /* setup ULPI bypass and burst configurations */ - reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN - | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN - | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN); - reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN; - - if (is_omap_ehci_rev1(omap)) { - if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_UNKNOWN) - reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS; - if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_UNKNOWN) - reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS; - if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_UNKNOWN) - reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS; - - /* Bypass the TLL module for PHY mode operation */ - if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) { - dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1\n"); - if (is_ehci_phy_mode(omap->port_mode[0]) || - is_ehci_phy_mode(omap->port_mode[1]) || - is_ehci_phy_mode(omap->port_mode[2])) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; - else - reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; - } else { - dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n"); - if (is_ehci_phy_mode(omap->port_mode[0])) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; - else if (is_ehci_tll_mode(omap->port_mode[0])) - reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; - - if (is_ehci_phy_mode(omap->port_mode[1])) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; - else if (is_ehci_tll_mode(omap->port_mode[1])) - reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; - - if (is_ehci_phy_mode(omap->port_mode[2])) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; - else if (is_ehci_tll_mode(omap->port_mode[2])) - reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; - } - } else if (is_omap_ehci_rev2(omap)) { - /* Clear port mode fields for PHY mode*/ - reg &= ~OMAP4_P1_MODE_CLEAR; - reg &= ~OMAP4_P2_MODE_CLEAR; - - if (is_ehci_tll_mode(omap->port_mode[0])) - reg |= OMAP4_P1_MODE_TLL; - else if (is_ehci_hsic_mode(omap->port_mode[0])) - reg |= OMAP4_P1_MODE_HSIC; - - if (is_ehci_tll_mode(omap->port_mode[1])) - reg |= OMAP4_P2_MODE_TLL; - else if (is_ehci_hsic_mode(omap->port_mode[1])) - reg |= OMAP4_P2_MODE_HSIC; + ret = omap_usbhs_enable(dev); + if (ret) { + dev_err(dev, "failed to start usbhs with err %d\n", ret); + goto err_enable; } - ehci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); - dev_dbg(omap->dev, "UHH setup done, uhh_hostconfig=%x\n", reg); - - /* * An undocumented "feature" in the OMAP3 EHCI controller, * causes suspended ports to be taken out of suspend when @@ -561,363 +173,50 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) * to suspend. Writing 1 to this undocumented register bit * disables this feature and restores normal behavior. */ - ehci_omap_writel(omap->ehci_base, EHCI_INSNREG04, + ehci_write(regs, EHCI_INSNREG04, EHCI_INSNREG04_DISABLE_UNSUSPEND); - if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) || - (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) || - (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)) { - - if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL) - tll_ch_mask |= OMAP_TLL_CHANNEL_1_EN_MASK; - if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL) - tll_ch_mask |= OMAP_TLL_CHANNEL_2_EN_MASK; - if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL) - tll_ch_mask |= OMAP_TLL_CHANNEL_3_EN_MASK; - - /* Enable UTMI mode for required TLL channels */ - omap_usb_utmi_init(omap, tll_ch_mask, OMAP_TLL_CHANNEL_COUNT); - } - - if (omap->phy_reset) { - /* Refer ISSUE1: - * Hold the PHY in RESET for enough time till - * PHY is settled and ready - */ - udelay(10); - - if (gpio_is_valid(omap->reset_gpio_port[0])) - gpio_set_value(omap->reset_gpio_port[0], 1); - - if (gpio_is_valid(omap->reset_gpio_port[1])) - gpio_set_value(omap->reset_gpio_port[1], 1); - } - /* Soft reset the PHY using PHY reset command over ULPI */ - if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) - omap_ehci_soft_phy_reset(omap, 0); - if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) - omap_ehci_soft_phy_reset(omap, 1); - - return 0; - -err_sys_status: - clk_disable(omap->utmi_p2_fck); - clk_put(omap->utmi_p2_fck); - clk_disable(omap->xclk60mhsp2_ck); - clk_put(omap->xclk60mhsp2_ck); - clk_disable(omap->utmi_p1_fck); - clk_put(omap->utmi_p1_fck); - clk_disable(omap->xclk60mhsp1_ck); - clk_put(omap->xclk60mhsp1_ck); - clk_disable(omap->usbtll_ick); - clk_put(omap->usbtll_ick); - -err_tll_ick: - clk_disable(omap->usbtll_fck); - clk_put(omap->usbtll_fck); - -err_tll_fck: - clk_disable(omap->usbhost_fs_fck); - clk_put(omap->usbhost_fs_fck); - - if (omap->phy_reset) { - if (gpio_is_valid(omap->reset_gpio_port[0])) - gpio_free(omap->reset_gpio_port[0]); - - if (gpio_is_valid(omap->reset_gpio_port[1])) - gpio_free(omap->reset_gpio_port[1]); - } - -err_host_48m_fck: - clk_disable(omap->usbhost_hs_fck); - clk_put(omap->usbhost_hs_fck); + if (pdata->port_mode[0] == OMAP_EHCI_PORT_MODE_PHY) + omap_ehci_soft_phy_reset(pdev, 0); + if (pdata->port_mode[1] == OMAP_EHCI_PORT_MODE_PHY) + omap_ehci_soft_phy_reset(pdev, 1); -err_host_120m_fck: - clk_disable(omap->usbhost_ick); - clk_put(omap->usbhost_ick); - -err_host_ick: - return ret; -} - -static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(100); - - dev_dbg(omap->dev, "stopping TI EHCI USB Controller\n"); - - /* Reset OMAP modules for insmod/rmmod to work */ - ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, - is_omap_ehci_rev2(omap) ? - OMAP4_UHH_SYSCONFIG_SOFTRESET : - OMAP_UHH_SYSCONFIG_SOFTRESET); - while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) - & (1 << 0))) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) - & (1 << 1))) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) - & (1 << 2))) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1)); - - while (!(ehci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS) - & (1 << 0))) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - if (omap->usbtll_fck != NULL) { - clk_disable(omap->usbtll_fck); - clk_put(omap->usbtll_fck); - omap->usbtll_fck = NULL; - } - - if (omap->usbhost_ick != NULL) { - clk_disable(omap->usbhost_ick); - clk_put(omap->usbhost_ick); - omap->usbhost_ick = NULL; - } - - if (omap->usbhost_fs_fck != NULL) { - clk_disable(omap->usbhost_fs_fck); - clk_put(omap->usbhost_fs_fck); - omap->usbhost_fs_fck = NULL; - } - - if (omap->usbhost_hs_fck != NULL) { - clk_disable(omap->usbhost_hs_fck); - clk_put(omap->usbhost_hs_fck); - omap->usbhost_hs_fck = NULL; - } - - if (omap->usbtll_ick != NULL) { - clk_disable(omap->usbtll_ick); - clk_put(omap->usbtll_ick); - omap->usbtll_ick = NULL; - } - - if (is_omap_ehci_rev2(omap)) { - if (omap->xclk60mhsp1_ck != NULL) { - clk_disable(omap->xclk60mhsp1_ck); - clk_put(omap->xclk60mhsp1_ck); - omap->xclk60mhsp1_ck = NULL; - } - - if (omap->utmi_p1_fck != NULL) { - clk_disable(omap->utmi_p1_fck); - clk_put(omap->utmi_p1_fck); - omap->utmi_p1_fck = NULL; - } - - if (omap->xclk60mhsp2_ck != NULL) { - clk_disable(omap->xclk60mhsp2_ck); - clk_put(omap->xclk60mhsp2_ck); - omap->xclk60mhsp2_ck = NULL; - } - - if (omap->utmi_p2_fck != NULL) { - clk_disable(omap->utmi_p2_fck); - clk_put(omap->utmi_p2_fck); - omap->utmi_p2_fck = NULL; - } - } - - if (omap->phy_reset) { - if (gpio_is_valid(omap->reset_gpio_port[0])) - gpio_free(omap->reset_gpio_port[0]); - - if (gpio_is_valid(omap->reset_gpio_port[1])) - gpio_free(omap->reset_gpio_port[1]); - } - - dev_dbg(omap->dev, "Clock to USB host has been disabled\n"); -} - -/*-------------------------------------------------------------------------*/ - -static const struct hc_driver ehci_omap_hc_driver; - -/* configure so an HC device and id are always provided */ -/* always called with process context; sleeping is OK */ - -/** - * ehci_hcd_omap_probe - initialize TI-based HCDs - * - * Allocates basic resources for this USB host controller, and - * then invokes the start() method for the HCD associated with it - * through the hotplug entry's driver_data. - */ -static int ehci_hcd_omap_probe(struct platform_device *pdev) -{ - struct ehci_hcd_omap_platform_data *pdata = pdev->dev.platform_data; - struct ehci_hcd_omap *omap; - struct resource *res; - struct usb_hcd *hcd; - - int irq = platform_get_irq(pdev, 0); - int ret = -ENODEV; - int i; - char supply[7]; - - if (!pdata) { - dev_dbg(&pdev->dev, "missing platform_data\n"); - goto err_pdata; - } - - if (usb_disabled()) - goto err_disabled; - - omap = kzalloc(sizeof(*omap), GFP_KERNEL); - if (!omap) { - ret = -ENOMEM; - goto err_disabled; - } - - hcd = usb_create_hcd(&ehci_omap_hc_driver, &pdev->dev, - dev_name(&pdev->dev)); - if (!hcd) { - dev_err(&pdev->dev, "failed to create hcd with err %d\n", ret); - ret = -ENOMEM; - goto err_create_hcd; - } - - platform_set_drvdata(pdev, omap); - omap->dev = &pdev->dev; - omap->phy_reset = pdata->phy_reset; - omap->reset_gpio_port[0] = pdata->reset_gpio_port[0]; - omap->reset_gpio_port[1] = pdata->reset_gpio_port[1]; - omap->reset_gpio_port[2] = pdata->reset_gpio_port[2]; - omap->port_mode[0] = pdata->port_mode[0]; - omap->port_mode[1] = pdata->port_mode[1]; - omap->port_mode[2] = pdata->port_mode[2]; - omap->ehci = hcd_to_ehci(hcd); - omap->ehci->sbrn = 0x20; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) { - dev_err(&pdev->dev, "EHCI ioremap failed\n"); - ret = -ENOMEM; - goto err_ioremap; - } + omap_ehci = hcd_to_ehci(hcd); + omap_ehci->sbrn = 0x20; /* we know this is the memory we want, no need to ioremap again */ - omap->ehci->caps = hcd->regs; - omap->ehci_base = hcd->regs; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - omap->uhh_base = ioremap(res->start, resource_size(res)); - if (!omap->uhh_base) { - dev_err(&pdev->dev, "UHH ioremap failed\n"); - ret = -ENOMEM; - goto err_uhh_ioremap; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 2); - omap->tll_base = ioremap(res->start, resource_size(res)); - if (!omap->tll_base) { - dev_err(&pdev->dev, "TLL ioremap failed\n"); - ret = -ENOMEM; - goto err_tll_ioremap; - } - - /* get ehci regulator and enable */ - for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) { - if (omap->port_mode[i] != EHCI_HCD_OMAP_MODE_PHY) { - omap->regulator[i] = NULL; - continue; - } - snprintf(supply, sizeof(supply), "hsusb%d", i); - omap->regulator[i] = regulator_get(omap->dev, supply); - if (IS_ERR(omap->regulator[i])) { - omap->regulator[i] = NULL; - dev_dbg(&pdev->dev, - "failed to get ehci port%d regulator\n", i); - } else { - regulator_enable(omap->regulator[i]); - } - } - - ret = omap_start_ehc(omap, hcd); - if (ret) { - dev_err(&pdev->dev, "failed to start ehci with err %d\n", ret); - goto err_start; - } + omap_ehci->caps = hcd->regs; + omap_ehci->regs = hcd->regs + + HC_LENGTH(readl(&omap_ehci->caps->hc_capbase)); - omap->ehci->regs = hcd->regs - + HC_LENGTH(readl(&omap->ehci->caps->hc_capbase)); - - dbg_hcs_params(omap->ehci, "reset"); - dbg_hcc_params(omap->ehci, "reset"); + dbg_hcs_params(omap_ehci, "reset"); + dbg_hcc_params(omap_ehci, "reset"); /* cache this readonly data; minimize chip reads */ - omap->ehci->hcs_params = readl(&omap->ehci->caps->hcs_params); + omap_ehci->hcs_params = readl(&omap_ehci->caps->hcs_params); ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); if (ret) { - dev_err(&pdev->dev, "failed to add hcd with err %d\n", ret); + dev_err(dev, "failed to add hcd with err %d\n", ret); goto err_add_hcd; } /* root ports should always stay powered */ - ehci_port_power(omap->ehci, 1); + ehci_port_power(omap_ehci, 1); return 0; err_add_hcd: - omap_stop_ehc(omap, hcd); + omap_usbhs_disable(dev); -err_start: - for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) { - if (omap->regulator[i]) { - regulator_disable(omap->regulator[i]); - regulator_put(omap->regulator[i]); - } - } - iounmap(omap->tll_base); - -err_tll_ioremap: - iounmap(omap->uhh_base); - -err_uhh_ioremap: - iounmap(hcd->regs); - -err_ioremap: +err_enable: usb_put_hcd(hcd); -err_create_hcd: - kfree(omap); -err_disabled: -err_pdata: +err_io: return ret; } -/* may be called without controller electrically present */ -/* may be called with controller, bus, and devices active */ /** * ehci_hcd_omap_remove - shutdown processing for EHCI HCDs @@ -929,31 +228,18 @@ err_pdata: */ static int ehci_hcd_omap_remove(struct platform_device *pdev) { - struct ehci_hcd_omap *omap = platform_get_drvdata(pdev); - struct usb_hcd *hcd = ehci_to_hcd(omap->ehci); - int i; + struct device *dev = &pdev->dev; + struct usb_hcd *hcd = dev_get_drvdata(dev); usb_remove_hcd(hcd); - omap_stop_ehc(omap, hcd); - iounmap(hcd->regs); - for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) { - if (omap->regulator[i]) { - regulator_disable(omap->regulator[i]); - regulator_put(omap->regulator[i]); - } - } - iounmap(omap->tll_base); - iounmap(omap->uhh_base); + omap_usbhs_disable(dev); usb_put_hcd(hcd); - kfree(omap); - return 0; } static void ehci_hcd_omap_shutdown(struct platform_device *pdev) { - struct ehci_hcd_omap *omap = platform_get_drvdata(pdev); - struct usb_hcd *hcd = ehci_to_hcd(omap->ehci); + struct usb_hcd *hcd = dev_get_drvdata(&pdev->dev); if (hcd->driver->shutdown) hcd->driver->shutdown(hcd); diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 0f87dc72820a..281e094e1c18 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -105,7 +105,8 @@ static int ehci_orion_setup(struct usb_hcd *hcd) struct ehci_hcd *ehci = hcd_to_ehci(hcd); int retval; - ehci_reset(ehci); + hcd->has_tt = 1; + retval = ehci_halt(ehci); if (retval) return retval; @@ -117,7 +118,7 @@ static int ehci_orion_setup(struct usb_hcd *hcd) if (retval) return retval; - hcd->has_tt = 1; + ehci_reset(ehci); ehci_port_power(ehci, 0); diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 07bb982e59f6..d5eaea7caf89 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -44,42 +44,6 @@ static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev) return 0; } -static int ehci_quirk_amd_hudson(struct ehci_hcd *ehci) -{ - struct pci_dev *amd_smbus_dev; - u8 rev = 0; - - amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL); - if (amd_smbus_dev) { - pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev); - if (rev < 0x40) { - pci_dev_put(amd_smbus_dev); - amd_smbus_dev = NULL; - return 0; - } - } else { - amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x780b, NULL); - if (!amd_smbus_dev) - return 0; - pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev); - if (rev < 0x11 || rev > 0x18) { - pci_dev_put(amd_smbus_dev); - amd_smbus_dev = NULL; - return 0; - } - } - - if (!amd_nb_dev) - amd_nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x1510, NULL); - - ehci_info(ehci, "QUIRK: Enable exception for AMD Hudson ASPM\n"); - - pci_dev_put(amd_smbus_dev); - amd_smbus_dev = NULL; - - return 1; -} - /* called during probe() after chip reset completes */ static int ehci_pci_setup(struct usb_hcd *hcd) { @@ -138,9 +102,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd) /* cache this readonly data; minimize chip reads */ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - if (ehci_quirk_amd_hudson(ehci)) - ehci->amd_l1_fix = 1; - retval = ehci_halt(ehci); if (retval) return retval; @@ -191,6 +152,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd) } break; case PCI_VENDOR_ID_AMD: + /* AMD PLL quirk */ + if (usb_amd_find_chipset_info()) + ehci->amd_pll_fix = 1; /* AMD8111 EHCI doesn't work, according to AMD errata */ if (pdev->device == 0x7463) { ehci_info(ehci, "ignoring AMD8111 (errata)\n"); @@ -236,6 +200,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd) } break; case PCI_VENDOR_ID_ATI: + /* AMD PLL quirk */ + if (usb_amd_find_chipset_info()) + ehci->amd_pll_fix = 1; /* SB600 and old version of SB700 have a bug in EHCI controller, * which causes usb devices lose response in some cases. */ diff --git a/drivers/usb/host/ehci-pmcmsp.c b/drivers/usb/host/ehci-pmcmsp.c new file mode 100644 index 000000000000..a2168642175b --- /dev/null +++ b/drivers/usb/host/ehci-pmcmsp.c @@ -0,0 +1,383 @@ +/* + * PMC MSP EHCI (Host Controller Driver) for USB. + * + * (C) Copyright 2006-2010 PMC-Sierra Inc + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +/* includes */ +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/usb.h> +#include <msp_usb.h> + +/* stream disable*/ +#define USB_CTRL_MODE_STREAM_DISABLE 0x10 + +/* threshold */ +#define USB_CTRL_FIFO_THRESH 0x00300000 + +/* register offset for usb_mode */ +#define USB_EHCI_REG_USB_MODE 0x68 + +/* register offset for usb fifo */ +#define USB_EHCI_REG_USB_FIFO 0x24 + +/* register offset for usb status */ +#define USB_EHCI_REG_USB_STATUS 0x44 + +/* serial/parallel transceiver */ +#define USB_EHCI_REG_BIT_STAT_STS (1<<29) + +/* TWI USB0 host device pin */ +#define MSP_PIN_USB0_HOST_DEV 49 + +/* TWI USB1 host device pin */ +#define MSP_PIN_USB1_HOST_DEV 50 + + +static void usb_hcd_tdi_set_mode(struct ehci_hcd *ehci) +{ + u8 *base; + u8 *statreg; + u8 *fiforeg; + u32 val; + struct ehci_regs *reg_base = ehci->regs; + + /* get register base */ + base = (u8 *)reg_base + USB_EHCI_REG_USB_MODE; + statreg = (u8 *)reg_base + USB_EHCI_REG_USB_STATUS; + fiforeg = (u8 *)reg_base + USB_EHCI_REG_USB_FIFO; + + /* Disable controller mode stream */ + val = ehci_readl(ehci, (u32 *)base); + ehci_writel(ehci, (val | USB_CTRL_MODE_STREAM_DISABLE), + (u32 *)base); + + /* clear STS to select parallel transceiver interface */ + val = ehci_readl(ehci, (u32 *)statreg); + val = val & ~USB_EHCI_REG_BIT_STAT_STS; + ehci_writel(ehci, val, (u32 *)statreg); + + /* write to set the proper fifo threshold */ + ehci_writel(ehci, USB_CTRL_FIFO_THRESH, (u32 *)fiforeg); + + /* set TWI GPIO USB_HOST_DEV pin high */ + gpio_direction_output(MSP_PIN_USB0_HOST_DEV, 1); +#ifdef CONFIG_MSP_HAS_DUAL_USB + gpio_direction_output(MSP_PIN_USB1_HOST_DEV, 1); +#endif +} + +/* called during probe() after chip reset completes */ +static int ehci_msp_setup(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int retval; + ehci->big_endian_mmio = 1; + ehci->big_endian_desc = 1; + + ehci->caps = hcd->regs; + ehci->regs = hcd->regs + + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); + dbg_hcs_params(ehci, "reset"); + dbg_hcc_params(ehci, "reset"); + + /* cache this readonly data; minimize chip reads */ + ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); + hcd->has_tt = 1; + + retval = ehci_halt(ehci); + if (retval) + return retval; + + ehci_reset(ehci); + + /* data structure init */ + retval = ehci_init(hcd); + if (retval) + return retval; + + usb_hcd_tdi_set_mode(ehci); + ehci_port_power(ehci, 0); + + return retval; +} + + +/* configure so an HC device and id are always provided + * always called with process context; sleeping is OK + */ + +static int usb_hcd_msp_map_regs(struct mspusb_device *dev) +{ + struct resource *res; + struct platform_device *pdev = &dev->dev; + u32 res_len; + int retval; + + /* MAB register space */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (res == NULL) + return -ENOMEM; + res_len = res->end - res->start + 1; + if (!request_mem_region(res->start, res_len, "mab regs")) + return -EBUSY; + + dev->mab_regs = ioremap_nocache(res->start, res_len); + if (dev->mab_regs == NULL) { + retval = -ENOMEM; + goto err1; + } + + /* MSP USB register space */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 2); + if (res == NULL) { + retval = -ENOMEM; + goto err2; + } + res_len = res->end - res->start + 1; + if (!request_mem_region(res->start, res_len, "usbid regs")) { + retval = -EBUSY; + goto err2; + } + dev->usbid_regs = ioremap_nocache(res->start, res_len); + if (dev->usbid_regs == NULL) { + retval = -ENOMEM; + goto err3; + } + + return 0; +err3: + res = platform_get_resource(pdev, IORESOURCE_MEM, 2); + res_len = res->end - res->start + 1; + release_mem_region(res->start, res_len); +err2: + iounmap(dev->mab_regs); +err1: + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + res_len = res->end - res->start + 1; + release_mem_region(res->start, res_len); + dev_err(&pdev->dev, "Failed to map non-EHCI regs.\n"); + return retval; +} + +/** + * usb_hcd_msp_probe - initialize PMC MSP-based HCDs + * Context: !in_interrupt() + * + * Allocates basic resources for this USB host controller, and + * then invokes the start() method for the HCD associated with it + * through the hotplug entry's driver_data. + * + */ +int usb_hcd_msp_probe(const struct hc_driver *driver, + struct platform_device *dev) +{ + int retval; + struct usb_hcd *hcd; + struct resource *res; + struct ehci_hcd *ehci ; + + hcd = usb_create_hcd(driver, &dev->dev, "pmcmsp"); + if (!hcd) + return -ENOMEM; + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (res == NULL) { + pr_debug("No IOMEM resource info for %s.\n", dev->name); + retval = -ENOMEM; + goto err1; + } + hcd->rsrc_start = res->start; + hcd->rsrc_len = res->end - res->start + 1; + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, dev->name)) { + retval = -EBUSY; + goto err1; + } + hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) { + pr_debug("ioremap failed"); + retval = -ENOMEM; + goto err2; + } + + res = platform_get_resource(dev, IORESOURCE_IRQ, 0); + if (res == NULL) { + dev_err(&dev->dev, "No IRQ resource info for %s.\n", dev->name); + retval = -ENOMEM; + goto err3; + } + + /* Map non-EHCI register spaces */ + retval = usb_hcd_msp_map_regs(to_mspusb_device(dev)); + if (retval != 0) + goto err3; + + ehci = hcd_to_ehci(hcd); + ehci->big_endian_mmio = 1; + ehci->big_endian_desc = 1; + + + retval = usb_add_hcd(hcd, res->start, IRQF_SHARED); + if (retval == 0) + return 0; + + usb_remove_hcd(hcd); +err3: + iounmap(hcd->regs); +err2: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err1: + usb_put_hcd(hcd); + + return retval; +} + + + +/** + * usb_hcd_msp_remove - shutdown processing for PMC MSP-based HCDs + * @dev: USB Host Controller being removed + * Context: !in_interrupt() + * + * Reverses the effect of usb_hcd_msp_probe(), first invoking + * the HCD's stop() method. It is always called from a thread + * context, normally "rmmod", "apmd", or something similar. + * + * may be called without controller electrically present + * may be called with controller, bus, and devices active + */ +void usb_hcd_msp_remove(struct usb_hcd *hcd, struct platform_device *dev) +{ + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); +} + +#ifdef CONFIG_MSP_HAS_DUAL_USB +/* + * Wrapper around the main ehci_irq. Since both USB host controllers are + * sharing the same IRQ, need to first determine whether we're the intended + * recipient of this interrupt. + */ +static irqreturn_t ehci_msp_irq(struct usb_hcd *hcd) +{ + u32 int_src; + struct device *dev = hcd->self.controller; + struct platform_device *pdev; + struct mspusb_device *mdev; + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + /* need to reverse-map a couple of containers to get our device */ + pdev = to_platform_device(dev); + mdev = to_mspusb_device(pdev); + + /* Check to see if this interrupt is for this host controller */ + int_src = ehci_readl(ehci, &mdev->mab_regs->int_stat); + if (int_src & (1 << pdev->id)) + return ehci_irq(hcd); + + /* Not for this device */ + return IRQ_NONE; +} +#endif /* DUAL_USB */ + +static const struct hc_driver ehci_msp_hc_driver = { + .description = hcd_name, + .product_desc = "PMC MSP EHCI", + .hcd_priv_size = sizeof(struct ehci_hcd), + + /* + * generic hardware linkage + */ +#ifdef CONFIG_MSP_HAS_DUAL_USB + .irq = ehci_msp_irq, +#else + .irq = ehci_irq, +#endif + .flags = HCD_MEMORY | HCD_USB2, + + /* + * basic lifecycle operations + */ + .reset = ehci_msp_setup, + .start = ehci_run, + .shutdown = ehci_shutdown, + .start = ehci_run, + .stop = ehci_stop, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + .endpoint_reset = ehci_endpoint_reset, + + /* + * scheduling support + */ + .get_frame_number = ehci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +}; + +static int ehci_hcd_msp_drv_probe(struct platform_device *pdev) +{ + int ret; + + pr_debug("In ehci_hcd_msp_drv_probe"); + + if (usb_disabled()) + return -ENODEV; + + gpio_request(MSP_PIN_USB0_HOST_DEV, "USB0_HOST_DEV_GPIO"); +#ifdef CONFIG_MSP_HAS_DUAL_USB + gpio_request(MSP_PIN_USB1_HOST_DEV, "USB1_HOST_DEV_GPIO"); +#endif + + ret = usb_hcd_msp_probe(&ehci_msp_hc_driver, pdev); + + return ret; +} + +static int ehci_hcd_msp_drv_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + usb_hcd_msp_remove(hcd, pdev); + + /* free TWI GPIO USB_HOST_DEV pin */ + gpio_free(MSP_PIN_USB0_HOST_DEV); +#ifdef CONFIG_MSP_HAS_DUAL_USB + gpio_free(MSP_PIN_USB1_HOST_DEV); +#endif + + return 0; +} + +MODULE_ALIAS("pmcmsp-ehci"); + +static struct platform_driver ehci_hcd_msp_driver = { + .probe = ehci_hcd_msp_drv_probe, + .remove = ehci_hcd_msp_drv_remove, + .driver = { + .name = "pmcmsp-ehci", + .owner = THIS_MODULE, + }, +}; diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 233c288e3f93..fe99895fb098 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -1107,22 +1107,24 @@ submit_async ( struct list_head *qtd_list, gfp_t mem_flags ) { - struct ehci_qtd *qtd; int epnum; unsigned long flags; struct ehci_qh *qh = NULL; int rc; - qtd = list_entry (qtd_list->next, struct ehci_qtd, qtd_list); epnum = urb->ep->desc.bEndpointAddress; #ifdef EHCI_URB_TRACE - ehci_dbg (ehci, - "%s %s urb %p ep%d%s len %d, qtd %p [qh %p]\n", - __func__, urb->dev->devpath, urb, - epnum & 0x0f, (epnum & USB_DIR_IN) ? "in" : "out", - urb->transfer_buffer_length, - qtd, urb->ep->hcpriv); + { + struct ehci_qtd *qtd; + qtd = list_entry(qtd_list->next, struct ehci_qtd, qtd_list); + ehci_dbg(ehci, + "%s %s urb %p ep%d%s len %d, qtd %p [qh %p]\n", + __func__, urb->dev->devpath, urb, + epnum & 0x0f, (epnum & USB_DIR_IN) ? "in" : "out", + urb->transfer_buffer_length, + qtd, urb->ep->hcpriv); + } #endif spin_lock_irqsave (&ehci->lock, flags); diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index aa46f57f9ec8..1543c838b3d1 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -1048,8 +1048,6 @@ iso_stream_put(struct ehci_hcd *ehci, struct ehci_iso_stream *stream) * not like a QH -- no persistent state (toggle, halt) */ if (stream->refcount == 1) { - int is_in; - // BUG_ON (!list_empty(&stream->td_list)); while (!list_empty (&stream->free_list)) { @@ -1076,7 +1074,6 @@ iso_stream_put(struct ehci_hcd *ehci, struct ehci_iso_stream *stream) } } - is_in = (stream->bEndpointAddress & USB_DIR_IN) ? 0x10 : 0; stream->bEndpointAddress &= 0x0f; if (stream->ep) stream->ep->hcpriv = NULL; @@ -1590,63 +1587,6 @@ itd_link (struct ehci_hcd *ehci, unsigned frame, struct ehci_itd *itd) *hw_p = cpu_to_hc32(ehci, itd->itd_dma | Q_TYPE_ITD); } -#define AB_REG_BAR_LOW 0xe0 -#define AB_REG_BAR_HIGH 0xe1 -#define AB_INDX(addr) ((addr) + 0x00) -#define AB_DATA(addr) ((addr) + 0x04) -#define NB_PCIE_INDX_ADDR 0xe0 -#define NB_PCIE_INDX_DATA 0xe4 -#define NB_PIF0_PWRDOWN_0 0x01100012 -#define NB_PIF0_PWRDOWN_1 0x01100013 - -static void ehci_quirk_amd_L1(struct ehci_hcd *ehci, int disable) -{ - u32 addr, addr_low, addr_high, val; - - outb_p(AB_REG_BAR_LOW, 0xcd6); - addr_low = inb_p(0xcd7); - outb_p(AB_REG_BAR_HIGH, 0xcd6); - addr_high = inb_p(0xcd7); - addr = addr_high << 8 | addr_low; - outl_p(0x30, AB_INDX(addr)); - outl_p(0x40, AB_DATA(addr)); - outl_p(0x34, AB_INDX(addr)); - val = inl_p(AB_DATA(addr)); - - if (disable) { - val &= ~0x8; - val |= (1 << 4) | (1 << 9); - } else { - val |= 0x8; - val &= ~((1 << 4) | (1 << 9)); - } - outl_p(val, AB_DATA(addr)); - - if (amd_nb_dev) { - addr = NB_PIF0_PWRDOWN_0; - pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_ADDR, addr); - pci_read_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, &val); - if (disable) - val &= ~(0x3f << 7); - else - val |= 0x3f << 7; - - pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, val); - - addr = NB_PIF0_PWRDOWN_1; - pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_ADDR, addr); - pci_read_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, &val); - if (disable) - val &= ~(0x3f << 7); - else - val |= 0x3f << 7; - - pci_write_config_dword(amd_nb_dev, NB_PCIE_INDX_DATA, val); - } - - return; -} - /* fit urb's itds into the selected schedule slot; activate as needed */ static int itd_link_urb ( @@ -1675,8 +1615,8 @@ itd_link_urb ( } if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) { - if (ehci->amd_l1_fix == 1) - ehci_quirk_amd_L1(ehci, 1); + if (ehci->amd_pll_fix == 1) + usb_amd_quirk_pll_disable(); } ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++; @@ -1804,8 +1744,8 @@ itd_complete ( ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--; if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) { - if (ehci->amd_l1_fix == 1) - ehci_quirk_amd_L1(ehci, 0); + if (ehci->amd_pll_fix == 1) + usb_amd_quirk_pll_enable(); } if (unlikely(list_is_singular(&stream->td_list))) { @@ -2095,8 +2035,8 @@ sitd_link_urb ( } if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) { - if (ehci->amd_l1_fix == 1) - ehci_quirk_amd_L1(ehci, 1); + if (ehci->amd_pll_fix == 1) + usb_amd_quirk_pll_disable(); } ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs++; @@ -2200,8 +2140,8 @@ sitd_complete ( ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--; if (ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs == 0) { - if (ehci->amd_l1_fix == 1) - ehci_quirk_amd_L1(ehci, 0); + if (ehci->amd_pll_fix == 1) + usb_amd_quirk_pll_enable(); } if (list_is_singular(&stream->td_list)) { diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c new file mode 100644 index 000000000000..a516af28c29b --- /dev/null +++ b/drivers/usb/host/ehci-tegra.c @@ -0,0 +1,715 @@ +/* + * EHCI-compliant USB host controller driver for NVIDIA Tegra SoCs + * + * Copyright (C) 2010 Google, Inc. + * Copyright (C) 2009 NVIDIA Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + */ + +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/platform_data/tegra_usb.h> +#include <linux/irq.h> +#include <linux/usb/otg.h> +#include <mach/usb_phy.h> + +#define TEGRA_USB_DMA_ALIGN 32 + +struct tegra_ehci_hcd { + struct ehci_hcd *ehci; + struct tegra_usb_phy *phy; + struct clk *clk; + struct clk *emc_clk; + struct otg_transceiver *transceiver; + int host_resumed; + int bus_suspended; + int port_resuming; + int power_down_on_bus_suspend; + enum tegra_usb_phy_port_speed port_speed; +}; + +static void tegra_ehci_power_up(struct usb_hcd *hcd) +{ + struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); + + clk_enable(tegra->emc_clk); + clk_enable(tegra->clk); + tegra_usb_phy_power_on(tegra->phy); + tegra->host_resumed = 1; +} + +static void tegra_ehci_power_down(struct usb_hcd *hcd) +{ + struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); + + tegra->host_resumed = 0; + tegra_usb_phy_power_off(tegra->phy); + clk_disable(tegra->clk); + clk_disable(tegra->emc_clk); +} + +static int tegra_ehci_hub_control( + struct usb_hcd *hcd, + u16 typeReq, + u16 wValue, + u16 wIndex, + char *buf, + u16 wLength +) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); + u32 __iomem *status_reg; + u32 temp; + unsigned long flags; + int retval = 0; + + status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1]; + + spin_lock_irqsave(&ehci->lock, flags); + + /* + * In ehci_hub_control() for USB_PORT_FEAT_ENABLE clears the other bits + * that are write on clear, by writing back the register read value, so + * USB_PORT_FEAT_ENABLE is handled by masking the set on clear bits + */ + if (typeReq == ClearPortFeature && wValue == USB_PORT_FEAT_ENABLE) { + temp = ehci_readl(ehci, status_reg) & ~PORT_RWC_BITS; + ehci_writel(ehci, temp & ~PORT_PE, status_reg); + goto done; + } + + else if (typeReq == GetPortStatus) { + temp = ehci_readl(ehci, status_reg); + if (tegra->port_resuming && !(temp & PORT_SUSPEND)) { + /* Resume completed, re-enable disconnect detection */ + tegra->port_resuming = 0; + tegra_usb_phy_postresume(tegra->phy); + } + } + + else if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) { + temp = ehci_readl(ehci, status_reg); + if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) { + retval = -EPIPE; + goto done; + } + + temp &= ~PORT_WKCONN_E; + temp |= PORT_WKDISC_E | PORT_WKOC_E; + ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); + + /* + * If a transaction is in progress, there may be a delay in + * suspending the port. Poll until the port is suspended. + */ + if (handshake(ehci, status_reg, PORT_SUSPEND, + PORT_SUSPEND, 5000)) + pr_err("%s: timeout waiting for SUSPEND\n", __func__); + + set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports); + goto done; + } + + /* + * Tegra host controller will time the resume operation to clear the bit + * when the port control state switches to HS or FS Idle. This behavior + * is different from EHCI where the host controller driver is required + * to set this bit to a zero after the resume duration is timed in the + * driver. + */ + else if (typeReq == ClearPortFeature && + wValue == USB_PORT_FEAT_SUSPEND) { + temp = ehci_readl(ehci, status_reg); + if ((temp & PORT_RESET) || !(temp & PORT_PE)) { + retval = -EPIPE; + goto done; + } + + if (!(temp & PORT_SUSPEND)) + goto done; + + /* Disable disconnect detection during port resume */ + tegra_usb_phy_preresume(tegra->phy); + + ehci->reset_done[wIndex-1] = jiffies + msecs_to_jiffies(25); + + temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS); + /* start resume signalling */ + ehci_writel(ehci, temp | PORT_RESUME, status_reg); + + spin_unlock_irqrestore(&ehci->lock, flags); + msleep(20); + spin_lock_irqsave(&ehci->lock, flags); + + /* Poll until the controller clears RESUME and SUSPEND */ + if (handshake(ehci, status_reg, PORT_RESUME, 0, 2000)) + pr_err("%s: timeout waiting for RESUME\n", __func__); + if (handshake(ehci, status_reg, PORT_SUSPEND, 0, 2000)) + pr_err("%s: timeout waiting for SUSPEND\n", __func__); + + ehci->reset_done[wIndex-1] = 0; + + tegra->port_resuming = 1; + goto done; + } + + spin_unlock_irqrestore(&ehci->lock, flags); + + /* Handle the hub control events here */ + return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); +done: + spin_unlock_irqrestore(&ehci->lock, flags); + return retval; +} + +static void tegra_ehci_restart(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + + ehci_reset(ehci); + + /* setup the frame list and Async q heads */ + ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list); + ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next); + /* setup the command register and set the controller in RUN mode */ + ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET); + ehci->command |= CMD_RUN; + ehci_writel(ehci, ehci->command, &ehci->regs->command); + + down_write(&ehci_cf_port_reset_rwsem); + ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); + /* flush posted writes */ + ehci_readl(ehci, &ehci->regs->command); + up_write(&ehci_cf_port_reset_rwsem); +} + +static int tegra_usb_suspend(struct usb_hcd *hcd) +{ + struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); + struct ehci_regs __iomem *hw = tegra->ehci->regs; + unsigned long flags; + + spin_lock_irqsave(&tegra->ehci->lock, flags); + + tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3; + ehci_halt(tegra->ehci); + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + + spin_unlock_irqrestore(&tegra->ehci->lock, flags); + + tegra_ehci_power_down(hcd); + return 0; +} + +static int tegra_usb_resume(struct usb_hcd *hcd) +{ + struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct ehci_regs __iomem *hw = ehci->regs; + unsigned long val; + + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + tegra_ehci_power_up(hcd); + + if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) { + /* Wait for the phy to detect new devices + * before we restart the controller */ + msleep(10); + goto restart; + } + + /* Force the phy to keep data lines in suspend state */ + tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed); + + /* Enable host mode */ + tdi_reset(ehci); + + /* Enable Port Power */ + val = readl(&hw->port_status[0]); + val |= PORT_POWER; + writel(val, &hw->port_status[0]); + udelay(10); + + /* Check if the phy resume from LP0. When the phy resume from LP0 + * USB register will be reset. */ + if (!readl(&hw->async_next)) { + /* Program the field PTC based on the saved speed mode */ + val = readl(&hw->port_status[0]); + val &= ~PORT_TEST(~0); + if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH) + val |= PORT_TEST_FORCE; + else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL) + val |= PORT_TEST(6); + else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW) + val |= PORT_TEST(7); + writel(val, &hw->port_status[0]); + udelay(10); + + /* Disable test mode by setting PTC field to NORMAL_OP */ + val = readl(&hw->port_status[0]); + val &= ~PORT_TEST(~0); + writel(val, &hw->port_status[0]); + udelay(10); + } + + /* Poll until CCS is enabled */ + if (handshake(ehci, &hw->port_status[0], PORT_CONNECT, + PORT_CONNECT, 2000)) { + pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__); + goto restart; + } + + /* Poll until PE is enabled */ + if (handshake(ehci, &hw->port_status[0], PORT_PE, + PORT_PE, 2000)) { + pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__); + goto restart; + } + + /* Clear the PCI status, to avoid an interrupt taken upon resume */ + val = readl(&hw->status); + val |= STS_PCD; + writel(val, &hw->status); + + /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */ + val = readl(&hw->port_status[0]); + if ((val & PORT_POWER) && (val & PORT_PE)) { + val |= PORT_SUSPEND; + writel(val, &hw->port_status[0]); + + /* Wait until port suspend completes */ + if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND, + PORT_SUSPEND, 1000)) { + pr_err("%s: timeout waiting for PORT_SUSPEND\n", + __func__); + goto restart; + } + } + + tegra_ehci_phy_restore_end(tegra->phy); + return 0; + +restart: + if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH) + tegra_ehci_phy_restore_end(tegra->phy); + + tegra_ehci_restart(hcd); + return 0; +} + +static void tegra_ehci_shutdown(struct usb_hcd *hcd) +{ + struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); + + /* ehci_shutdown touches the USB controller registers, make sure + * controller has clocks to it */ + if (!tegra->host_resumed) + tegra_ehci_power_up(hcd); + + ehci_shutdown(hcd); +} + +static int tegra_ehci_setup(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int retval; + + /* EHCI registers start at offset 0x100 */ + ehci->caps = hcd->regs + 0x100; + ehci->regs = hcd->regs + 0x100 + + HC_LENGTH(readl(&ehci->caps->hc_capbase)); + + dbg_hcs_params(ehci, "reset"); + dbg_hcc_params(ehci, "reset"); + + /* cache this readonly data; minimize chip reads */ + ehci->hcs_params = readl(&ehci->caps->hcs_params); + + /* switch to host mode */ + hcd->has_tt = 1; + ehci_reset(ehci); + + retval = ehci_halt(ehci); + if (retval) + return retval; + + /* data structure init */ + retval = ehci_init(hcd); + if (retval) + return retval; + + ehci->sbrn = 0x20; + + ehci_port_power(ehci, 1); + return retval; +} + +#ifdef CONFIG_PM +static int tegra_ehci_bus_suspend(struct usb_hcd *hcd) +{ + struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); + int error_status = 0; + + error_status = ehci_bus_suspend(hcd); + if (!error_status && tegra->power_down_on_bus_suspend) { + tegra_usb_suspend(hcd); + tegra->bus_suspended = 1; + } + + return error_status; +} + +static int tegra_ehci_bus_resume(struct usb_hcd *hcd) +{ + struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); + + if (tegra->bus_suspended && tegra->power_down_on_bus_suspend) { + tegra_usb_resume(hcd); + tegra->bus_suspended = 0; + } + + tegra_usb_phy_preresume(tegra->phy); + tegra->port_resuming = 1; + return ehci_bus_resume(hcd); +} +#endif + +struct temp_buffer { + void *kmalloc_ptr; + void *old_xfer_buffer; + u8 data[0]; +}; + +static void free_temp_buffer(struct urb *urb) +{ + enum dma_data_direction dir; + struct temp_buffer *temp; + + if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER)) + return; + + dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + + temp = container_of(urb->transfer_buffer, struct temp_buffer, + data); + + if (dir == DMA_FROM_DEVICE) + memcpy(temp->old_xfer_buffer, temp->data, + urb->transfer_buffer_length); + urb->transfer_buffer = temp->old_xfer_buffer; + kfree(temp->kmalloc_ptr); + + urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER; +} + +static int alloc_temp_buffer(struct urb *urb, gfp_t mem_flags) +{ + enum dma_data_direction dir; + struct temp_buffer *temp, *kmalloc_ptr; + size_t kmalloc_size; + + if (urb->num_sgs || urb->sg || + urb->transfer_buffer_length == 0 || + !((uintptr_t)urb->transfer_buffer & (TEGRA_USB_DMA_ALIGN - 1))) + return 0; + + dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; + + /* Allocate a buffer with enough padding for alignment */ + kmalloc_size = urb->transfer_buffer_length + + sizeof(struct temp_buffer) + TEGRA_USB_DMA_ALIGN - 1; + + kmalloc_ptr = kmalloc(kmalloc_size, mem_flags); + if (!kmalloc_ptr) + return -ENOMEM; + + /* Position our struct temp_buffer such that data is aligned */ + temp = PTR_ALIGN(kmalloc_ptr + 1, TEGRA_USB_DMA_ALIGN) - 1; + + temp->kmalloc_ptr = kmalloc_ptr; + temp->old_xfer_buffer = urb->transfer_buffer; + if (dir == DMA_TO_DEVICE) + memcpy(temp->data, urb->transfer_buffer, + urb->transfer_buffer_length); + urb->transfer_buffer = temp->data; + + urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER; + + return 0; +} + +static int tegra_ehci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, + gfp_t mem_flags) +{ + int ret; + + ret = alloc_temp_buffer(urb, mem_flags); + if (ret) + return ret; + + ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags); + if (ret) + free_temp_buffer(urb); + + return ret; +} + +static void tegra_ehci_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) +{ + usb_hcd_unmap_urb_for_dma(hcd, urb); + free_temp_buffer(urb); +} + +static const struct hc_driver tegra_ehci_hc_driver = { + .description = hcd_name, + .product_desc = "Tegra EHCI Host Controller", + .hcd_priv_size = sizeof(struct ehci_hcd), + + .flags = HCD_USB2 | HCD_MEMORY, + + .reset = tegra_ehci_setup, + .irq = ehci_irq, + + .start = ehci_run, + .stop = ehci_stop, + .shutdown = tegra_ehci_shutdown, + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .map_urb_for_dma = tegra_ehci_map_urb_for_dma, + .unmap_urb_for_dma = tegra_ehci_unmap_urb_for_dma, + .endpoint_disable = ehci_endpoint_disable, + .endpoint_reset = ehci_endpoint_reset, + .get_frame_number = ehci_get_frame, + .hub_status_data = ehci_hub_status_data, + .hub_control = tegra_ehci_hub_control, + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +#ifdef CONFIG_PM + .bus_suspend = tegra_ehci_bus_suspend, + .bus_resume = tegra_ehci_bus_resume, +#endif + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, +}; + +static int tegra_ehci_probe(struct platform_device *pdev) +{ + struct resource *res; + struct usb_hcd *hcd; + struct tegra_ehci_hcd *tegra; + struct tegra_ehci_platform_data *pdata; + int err = 0; + int irq; + int instance = pdev->id; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "Platform data missing\n"); + return -EINVAL; + } + + tegra = kzalloc(sizeof(struct tegra_ehci_hcd), GFP_KERNEL); + if (!tegra) + return -ENOMEM; + + hcd = usb_create_hcd(&tegra_ehci_hc_driver, &pdev->dev, + dev_name(&pdev->dev)); + if (!hcd) { + dev_err(&pdev->dev, "Unable to create HCD\n"); + err = -ENOMEM; + goto fail_hcd; + } + + platform_set_drvdata(pdev, tegra); + + tegra->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(tegra->clk)) { + dev_err(&pdev->dev, "Can't get ehci clock\n"); + err = PTR_ERR(tegra->clk); + goto fail_clk; + } + + err = clk_enable(tegra->clk); + if (err) + goto fail_clken; + + tegra->emc_clk = clk_get(&pdev->dev, "emc"); + if (IS_ERR(tegra->emc_clk)) { + dev_err(&pdev->dev, "Can't get emc clock\n"); + err = PTR_ERR(tegra->emc_clk); + goto fail_emc_clk; + } + + clk_enable(tegra->emc_clk); + clk_set_rate(tegra->emc_clk, 400000000); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Failed to get I/O memory\n"); + err = -ENXIO; + goto fail_io; + } + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + hcd->regs = ioremap(res->start, resource_size(res)); + if (!hcd->regs) { + dev_err(&pdev->dev, "Failed to remap I/O memory\n"); + err = -ENOMEM; + goto fail_io; + } + + tegra->phy = tegra_usb_phy_open(instance, hcd->regs, pdata->phy_config, + TEGRA_USB_PHY_MODE_HOST); + if (IS_ERR(tegra->phy)) { + dev_err(&pdev->dev, "Failed to open USB phy\n"); + err = -ENXIO; + goto fail_phy; + } + + err = tegra_usb_phy_power_on(tegra->phy); + if (err) { + dev_err(&pdev->dev, "Failed to power on the phy\n"); + goto fail; + } + + tegra->host_resumed = 1; + tegra->power_down_on_bus_suspend = pdata->power_down_on_bus_suspend; + tegra->ehci = hcd_to_ehci(hcd); + + irq = platform_get_irq(pdev, 0); + if (!irq) { + dev_err(&pdev->dev, "Failed to get IRQ\n"); + err = -ENODEV; + goto fail; + } + set_irq_flags(irq, IRQF_VALID); + +#ifdef CONFIG_USB_OTG_UTILS + if (pdata->operating_mode == TEGRA_USB_OTG) { + tegra->transceiver = otg_get_transceiver(); + if (tegra->transceiver) + otg_set_host(tegra->transceiver, &hcd->self); + } +#endif + + err = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED); + if (err) { + dev_err(&pdev->dev, "Failed to add USB HCD\n"); + goto fail; + } + + return err; + +fail: +#ifdef CONFIG_USB_OTG_UTILS + if (tegra->transceiver) { + otg_set_host(tegra->transceiver, NULL); + otg_put_transceiver(tegra->transceiver); + } +#endif + tegra_usb_phy_close(tegra->phy); +fail_phy: + iounmap(hcd->regs); +fail_io: + clk_disable(tegra->emc_clk); + clk_put(tegra->emc_clk); +fail_emc_clk: + clk_disable(tegra->clk); +fail_clken: + clk_put(tegra->clk); +fail_clk: + usb_put_hcd(hcd); +fail_hcd: + kfree(tegra); + return err; +} + +#ifdef CONFIG_PM +static int tegra_ehci_resume(struct platform_device *pdev) +{ + struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); + struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); + + if (tegra->bus_suspended) + return 0; + + return tegra_usb_resume(hcd); +} + +static int tegra_ehci_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); + struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); + + if (tegra->bus_suspended) + return 0; + + if (time_before(jiffies, tegra->ehci->next_statechange)) + msleep(10); + + return tegra_usb_suspend(hcd); +} +#endif + +static int tegra_ehci_remove(struct platform_device *pdev) +{ + struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); + struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); + + if (tegra == NULL || hcd == NULL) + return -EINVAL; + +#ifdef CONFIG_USB_OTG_UTILS + if (tegra->transceiver) { + otg_set_host(tegra->transceiver, NULL); + otg_put_transceiver(tegra->transceiver); + } +#endif + + usb_remove_hcd(hcd); + usb_put_hcd(hcd); + + tegra_usb_phy_close(tegra->phy); + iounmap(hcd->regs); + + clk_disable(tegra->clk); + clk_put(tegra->clk); + + clk_disable(tegra->emc_clk); + clk_put(tegra->emc_clk); + + kfree(tegra); + return 0; +} + +static void tegra_ehci_hcd_shutdown(struct platform_device *pdev) +{ + struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); + struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); + + if (hcd->driver->shutdown) + hcd->driver->shutdown(hcd); +} + +static struct platform_driver tegra_ehci_driver = { + .probe = tegra_ehci_probe, + .remove = tegra_ehci_remove, +#ifdef CONFIG_PM + .suspend = tegra_ehci_suspend, + .resume = tegra_ehci_resume, +#endif + .shutdown = tegra_ehci_hcd_shutdown, + .driver = { + .name = "tegra-ehci", + } +}; diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 799ac16a54b4..f86d3fa20214 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -131,7 +131,7 @@ struct ehci_hcd { /* one per controller */ unsigned has_amcc_usb23:1; unsigned need_io_watchdog:1; unsigned broken_periodic:1; - unsigned amd_l1_fix:1; + unsigned amd_pll_fix:1; unsigned fs_i_thresh:1; /* Intel iso scheduling */ unsigned use_dummy_qh:1; /* AMD Frame List table quirk*/ diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c index f90d003f2302..2562e92e3178 100644 --- a/drivers/usb/host/imx21-hcd.c +++ b/drivers/usb/host/imx21-hcd.c @@ -927,7 +927,8 @@ static void schedule_nonisoc_etd(struct imx21 *imx21, struct urb *urb) if (state == US_CTRL_SETUP) { dir = TD_DIR_SETUP; if (unsuitable_for_dma(urb->setup_dma)) - unmap_urb_setup_for_dma(imx21->hcd, urb); + usb_hcd_unmap_urb_setup_for_dma(imx21->hcd, + urb); etd->dma_handle = urb->setup_dma; etd->cpu_buffer = urb->setup_packet; bufround = 0; @@ -943,7 +944,7 @@ static void schedule_nonisoc_etd(struct imx21 *imx21, struct urb *urb) dir = usb_pipeout(pipe) ? TD_DIR_OUT : TD_DIR_IN; bufround = (dir == TD_DIR_IN) ? 1 : 0; if (unsuitable_for_dma(urb->transfer_dma)) - unmap_urb_for_dma(imx21->hcd, urb); + usb_hcd_unmap_urb_for_dma(imx21->hcd, urb); etd->dma_handle = urb->transfer_dma; etd->cpu_buffer = urb->transfer_buffer; @@ -1471,8 +1472,8 @@ static int get_hub_descriptor(struct usb_hcd *hcd, 0x0010 | /* No over current protection */ 0); - desc->bitmap[0] = 1 << 1; - desc->bitmap[1] = ~0; + desc->u.hs.DeviceRemovable[0] = 1 << 1; + desc->u.hs.DeviceRemovable[1] = ~0; return 0; } diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 0da7fc05f453..c0e22f26da19 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -951,9 +951,9 @@ static void isp116x_hub_descriptor(struct isp116x *isp116x, /* Power switching, device type, overcurrent. */ desc->wHubCharacteristics = cpu_to_le16((u16) ((reg >> 8) & 0x1f)); desc->bPwrOn2PwrGood = (u8) ((reg >> 24) & 0xff); - /* two bitmaps: ports removable, and legacy PortPwrCtrlMask */ - desc->bitmap[0] = 0; - desc->bitmap[1] = ~0; + /* ports removable, and legacy PortPwrCtrlMask */ + desc->u.hs.DeviceRemovable[0] = 0; + desc->u.hs.DeviceRemovable[1] = ~0; } /* Perform reset of a given port. diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 43a39eb56cc6..662cd002adfc 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -226,7 +226,6 @@ static int claim_ptd_buffers(struct isp1362_ep_queue *epq, static inline void release_ptd_buffers(struct isp1362_ep_queue *epq, struct isp1362_ep *ep) { - int index = ep->ptd_index; int last = ep->ptd_index + ep->num_ptds; if (last > epq->buf_count) @@ -236,10 +235,8 @@ static inline void release_ptd_buffers(struct isp1362_ep_queue *epq, struct isp1 epq->buf_map, epq->skip_map); BUG_ON(last > epq->buf_count); - for (; index < last; index++) { - __clear_bit(index, &epq->buf_map); - __set_bit(index, &epq->skip_map); - } + bitmap_clear(&epq->buf_map, ep->ptd_index, ep->num_ptds); + bitmap_set(&epq->skip_map, ep->ptd_index, ep->num_ptds); epq->buf_avail += ep->num_ptds; epq->ptd_count--; @@ -1555,9 +1552,9 @@ static void isp1362_hub_descriptor(struct isp1362_hcd *isp1362_hcd, desc->wHubCharacteristics = cpu_to_le16((reg >> 8) & 0x1f); DBG(0, "%s: hubcharacteristics = %02x\n", __func__, cpu_to_le16((reg >> 8) & 0x1f)); desc->bPwrOn2PwrGood = (reg >> 24) & 0xff; - /* two bitmaps: ports removable, and legacy PortPwrCtrlMask */ - desc->bitmap[0] = desc->bNbrPorts == 1 ? 1 << 1 : 3 << 1; - desc->bitmap[1] = ~0; + /* ports removable, and legacy PortPwrCtrlMask */ + desc->u.hs.DeviceRemovable[0] = desc->bNbrPorts == 1 ? 1 << 1 : 3 << 1; + desc->u.hs.DeviceRemovable[1] = ~0; DBG(3, "%s: exit\n", __func__); } diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index bdba8c5d844a..f50e84ac570a 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -33,6 +33,7 @@ struct isp1760_hcd { struct inter_packet_info atl_ints[32]; struct inter_packet_info int_ints[32]; struct memory_chunk memory_pool[BLOCKS]; + u32 atl_queued; /* periodic schedule support */ #define DEFAULT_I_TDPS 1024 @@ -47,10 +48,6 @@ static inline struct isp1760_hcd *hcd_to_priv(struct usb_hcd *hcd) { return (struct isp1760_hcd *) (hcd->hcd_priv); } -static inline struct usb_hcd *priv_to_hcd(struct isp1760_hcd *priv) -{ - return container_of((void *) priv, struct usb_hcd, hcd_priv); -} /* Section 2.2 Host Controller Capability Registers */ #define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */ @@ -80,11 +77,10 @@ static inline struct usb_hcd *priv_to_hcd(struct isp1760_hcd *priv) #define PORT_RWC_BITS (PORT_CSC) struct isp1760_qtd { - struct isp1760_qtd *hw_next; u8 packet_type; - u8 toggle; - void *data_buffer; + u32 payload_addr; + /* the rest is HCD-private */ struct list_head qtd_list; struct urb *urb; @@ -92,205 +88,267 @@ struct isp1760_qtd { /* isp special*/ u32 status; -#define URB_COMPLETE_NOTIFY (1 << 0) #define URB_ENQUEUED (1 << 1) -#define URB_TYPE_ATL (1 << 2) -#define URB_TYPE_INT (1 << 3) }; struct isp1760_qh { /* first part defined by EHCI spec */ struct list_head qtd_list; - struct isp1760_hcd *priv; - - /* periodic schedule info */ - unsigned short period; /* polling interval */ - struct usb_device *dev; u32 toggle; u32 ping; }; -#define ehci_port_speed(priv, portsc) USB_PORT_STAT_HIGH_SPEED - -static unsigned int isp1760_readl(__u32 __iomem *regs) +/* + * Access functions for isp176x registers (addresses 0..0x03FF). + */ +static u32 reg_read32(void __iomem *base, u32 reg) { - return readl(regs); + return readl(base + reg); } -static void isp1760_writel(const unsigned int val, __u32 __iomem *regs) +static void reg_write32(void __iomem *base, u32 reg, u32 val) { - writel(val, regs); + writel(val, base + reg); } /* - * The next two copy via MMIO data to/from the device. memcpy_{to|from}io() + * Access functions for isp176x memory (offset >= 0x0400). + * + * bank_reads8() reads memory locations prefetched by an earlier write to + * HC_MEMORY_REG (see isp176x datasheet). Unless you want to do fancy multi- + * bank optimizations, you should use the more generic mem_reads8() below. + * + * For access to ptd memory, use the specialized ptd_read() and ptd_write() + * below. + * + * These functions copy via MMIO data to/from the device. memcpy_{to|from}io() * doesn't quite work because some people have to enforce 32-bit access */ -static void priv_read_copy(struct isp1760_hcd *priv, u32 *src, - __u32 __iomem *dst, u32 len) +static void bank_reads8(void __iomem *src_base, u32 src_offset, u32 bank_addr, + __u32 *dst, u32 bytes) { + __u32 __iomem *src; u32 val; - u8 *buff8; + __u8 *src_byteptr; + __u8 *dst_byteptr; - if (!src) { - printk(KERN_ERR "ERROR: buffer: %p len: %d\n", src, len); - return; - } + src = src_base + (bank_addr | src_offset); - while (len >= 4) { - *src = __raw_readl(dst); - len -= 4; - src++; - dst++; + if (src_offset < PAYLOAD_OFFSET) { + while (bytes >= 4) { + *dst = le32_to_cpu(__raw_readl(src)); + bytes -= 4; + src++; + dst++; + } + } else { + while (bytes >= 4) { + *dst = __raw_readl(src); + bytes -= 4; + src++; + dst++; + } } - if (!len) + if (!bytes) return; /* in case we have 3, 2 or 1 by left. The dst buffer may not be fully * allocated. */ - val = isp1760_readl(dst); - - buff8 = (u8 *)src; - while (len) { - - *buff8 = val; - val >>= 8; - len--; - buff8++; + if (src_offset < PAYLOAD_OFFSET) + val = le32_to_cpu(__raw_readl(src)); + else + val = __raw_readl(src); + + dst_byteptr = (void *) dst; + src_byteptr = (void *) &val; + while (bytes > 0) { + *dst_byteptr = *src_byteptr; + dst_byteptr++; + src_byteptr++; + bytes--; } } -static void priv_write_copy(const struct isp1760_hcd *priv, const u32 *src, - __u32 __iomem *dst, u32 len) +static void mem_reads8(void __iomem *src_base, u32 src_offset, void *dst, + u32 bytes) { - while (len >= 4) { - __raw_writel(*src, dst); - len -= 4; - src++; - dst++; + reg_write32(src_base, HC_MEMORY_REG, src_offset + ISP_BANK(0)); + ndelay(90); + bank_reads8(src_base, src_offset, ISP_BANK(0), dst, bytes); +} + +static void mem_writes8(void __iomem *dst_base, u32 dst_offset, + __u32 const *src, u32 bytes) +{ + __u32 __iomem *dst; + + dst = dst_base + dst_offset; + + if (dst_offset < PAYLOAD_OFFSET) { + while (bytes >= 4) { + __raw_writel(cpu_to_le32(*src), dst); + bytes -= 4; + src++; + dst++; + } + } else { + while (bytes >= 4) { + __raw_writel(*src, dst); + bytes -= 4; + src++; + dst++; + } } - if (!len) + if (!bytes) return; - /* in case we have 3, 2 or 1 by left. The buffer is allocated and the - * extra bytes should not be read by the HW + /* in case we have 3, 2 or 1 bytes left. The buffer is allocated and the + * extra bytes should not be read by the HW. */ - __raw_writel(*src, dst); + if (dst_offset < PAYLOAD_OFFSET) + __raw_writel(cpu_to_le32(*src), dst); + else + __raw_writel(*src, dst); +} + +/* + * Read and write ptds. 'ptd_offset' should be one of ISO_PTD_OFFSET, + * INT_PTD_OFFSET, and ATL_PTD_OFFSET. 'slot' should be less than 32. + */ +static void ptd_read(void __iomem *base, u32 ptd_offset, u32 slot, + struct ptd *ptd) +{ + reg_write32(base, HC_MEMORY_REG, + ISP_BANK(0) + ptd_offset + slot*sizeof(*ptd)); + ndelay(90); + bank_reads8(base, ptd_offset + slot*sizeof(*ptd), ISP_BANK(0), + (void *) ptd, sizeof(*ptd)); +} + +static void ptd_write(void __iomem *base, u32 ptd_offset, u32 slot, + struct ptd *ptd) +{ + mem_writes8(base, ptd_offset + slot*sizeof(*ptd) + sizeof(ptd->dw0), + &ptd->dw1, 7*sizeof(ptd->dw1)); + /* Make sure dw0 gets written last (after other dw's and after payload) + since it contains the enable bit */ + wmb(); + mem_writes8(base, ptd_offset + slot*sizeof(*ptd), &ptd->dw0, + sizeof(ptd->dw0)); } + /* memory management of the 60kb on the chip from 0x1000 to 0xffff */ static void init_memory(struct isp1760_hcd *priv) { - int i; - u32 payload; + int i, curr; + u32 payload_addr; - payload = 0x1000; + payload_addr = PAYLOAD_OFFSET; for (i = 0; i < BLOCK_1_NUM; i++) { - priv->memory_pool[i].start = payload; + priv->memory_pool[i].start = payload_addr; priv->memory_pool[i].size = BLOCK_1_SIZE; priv->memory_pool[i].free = 1; - payload += priv->memory_pool[i].size; + payload_addr += priv->memory_pool[i].size; } - - for (i = BLOCK_1_NUM; i < BLOCK_1_NUM + BLOCK_2_NUM; i++) { - priv->memory_pool[i].start = payload; - priv->memory_pool[i].size = BLOCK_2_SIZE; - priv->memory_pool[i].free = 1; - payload += priv->memory_pool[i].size; + curr = i; + for (i = 0; i < BLOCK_2_NUM; i++) { + priv->memory_pool[curr + i].start = payload_addr; + priv->memory_pool[curr + i].size = BLOCK_2_SIZE; + priv->memory_pool[curr + i].free = 1; + payload_addr += priv->memory_pool[curr + i].size; } - - for (i = BLOCK_1_NUM + BLOCK_2_NUM; i < BLOCKS; i++) { - priv->memory_pool[i].start = payload; - priv->memory_pool[i].size = BLOCK_3_SIZE; - priv->memory_pool[i].free = 1; - payload += priv->memory_pool[i].size; + curr = i; + for (i = 0; i < BLOCK_3_NUM; i++) { + priv->memory_pool[curr + i].start = payload_addr; + priv->memory_pool[curr + i].size = BLOCK_3_SIZE; + priv->memory_pool[curr + i].free = 1; + payload_addr += priv->memory_pool[curr + i].size; } - BUG_ON(payload - priv->memory_pool[i - 1].size > PAYLOAD_SIZE); + BUG_ON(payload_addr - priv->memory_pool[0].start > PAYLOAD_AREA_SIZE); } -static u32 alloc_mem(struct isp1760_hcd *priv, u32 size) +static void alloc_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd) { + struct isp1760_hcd *priv = hcd_to_priv(hcd); int i; - if (!size) - return ISP1760_NULL_POINTER; + BUG_ON(qtd->payload_addr); + + if (!qtd->length) + return; for (i = 0; i < BLOCKS; i++) { - if (priv->memory_pool[i].size >= size && + if (priv->memory_pool[i].size >= qtd->length && priv->memory_pool[i].free) { - priv->memory_pool[i].free = 0; - return priv->memory_pool[i].start; + qtd->payload_addr = priv->memory_pool[i].start; + return; } } - printk(KERN_ERR "ISP1760 MEM: can not allocate %d bytes of memory\n", - size); - printk(KERN_ERR "Current memory map:\n"); + dev_err(hcd->self.controller, + "%s: Can not allocate %lu bytes of memory\n" + "Current memory map:\n", + __func__, qtd->length); for (i = 0; i < BLOCKS; i++) { - printk(KERN_ERR "Pool %2d size %4d status: %d\n", + dev_err(hcd->self.controller, "Pool %2d size %4d status: %d\n", i, priv->memory_pool[i].size, priv->memory_pool[i].free); } /* XXX maybe -ENOMEM could be possible */ BUG(); - return 0; + return; } -static void free_mem(struct isp1760_hcd *priv, u32 mem) +static void free_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd) { + struct isp1760_hcd *priv = hcd_to_priv(hcd); int i; - if (mem == ISP1760_NULL_POINTER) + if (!qtd->payload_addr) return; for (i = 0; i < BLOCKS; i++) { - if (priv->memory_pool[i].start == mem) { - + if (priv->memory_pool[i].start == qtd->payload_addr) { BUG_ON(priv->memory_pool[i].free); - priv->memory_pool[i].free = 1; - return ; + qtd->payload_addr = 0; + return; } } - printk(KERN_ERR "Trying to free not-here-allocated memory :%08x\n", - mem); + dev_err(hcd->self.controller, "%s: Invalid pointer: %08x\n", + __func__, qtd->payload_addr); BUG(); } static void isp1760_init_regs(struct usb_hcd *hcd) { - isp1760_writel(0, hcd->regs + HC_BUFFER_STATUS_REG); - isp1760_writel(NO_TRANSFER_ACTIVE, hcd->regs + - HC_ATL_PTD_SKIPMAP_REG); - isp1760_writel(NO_TRANSFER_ACTIVE, hcd->regs + - HC_INT_PTD_SKIPMAP_REG); - isp1760_writel(NO_TRANSFER_ACTIVE, hcd->regs + - HC_ISO_PTD_SKIPMAP_REG); - - isp1760_writel(~NO_TRANSFER_ACTIVE, hcd->regs + - HC_ATL_PTD_DONEMAP_REG); - isp1760_writel(~NO_TRANSFER_ACTIVE, hcd->regs + - HC_INT_PTD_DONEMAP_REG); - isp1760_writel(~NO_TRANSFER_ACTIVE, hcd->regs + - HC_ISO_PTD_DONEMAP_REG); + reg_write32(hcd->regs, HC_BUFFER_STATUS_REG, 0); + reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, NO_TRANSFER_ACTIVE); + reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, NO_TRANSFER_ACTIVE); + reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, NO_TRANSFER_ACTIVE); + + reg_write32(hcd->regs, HC_ATL_PTD_DONEMAP_REG, ~NO_TRANSFER_ACTIVE); + reg_write32(hcd->regs, HC_INT_PTD_DONEMAP_REG, ~NO_TRANSFER_ACTIVE); + reg_write32(hcd->regs, HC_ISO_PTD_DONEMAP_REG, ~NO_TRANSFER_ACTIVE); } -static int handshake(struct isp1760_hcd *priv, void __iomem *ptr, +static int handshake(struct usb_hcd *hcd, u32 reg, u32 mask, u32 done, int usec) { u32 result; do { - result = isp1760_readl(ptr); + result = reg_read32(hcd->regs, reg); if (result == ~0) return -ENODEV; result &= mask; @@ -303,17 +361,18 @@ static int handshake(struct isp1760_hcd *priv, void __iomem *ptr, } /* reset a non-running (STS_HALT == 1) controller */ -static int ehci_reset(struct isp1760_hcd *priv) +static int ehci_reset(struct usb_hcd *hcd) { int retval; - struct usb_hcd *hcd = priv_to_hcd(priv); - u32 command = isp1760_readl(hcd->regs + HC_USBCMD); + struct isp1760_hcd *priv = hcd_to_priv(hcd); + + u32 command = reg_read32(hcd->regs, HC_USBCMD); command |= CMD_RESET; - isp1760_writel(command, hcd->regs + HC_USBCMD); + reg_write32(hcd->regs, HC_USBCMD, command); hcd->state = HC_STATE_HALT; priv->next_statechange = jiffies; - retval = handshake(priv, hcd->regs + HC_USBCMD, + retval = handshake(hcd, HC_USBCMD, CMD_RESET, 0, 250 * 1000); return retval; } @@ -324,8 +383,7 @@ static void qh_destroy(struct isp1760_qh *qh) kmem_cache_free(qh_cachep, qh); } -static struct isp1760_qh *isp1760_qh_alloc(struct isp1760_hcd *priv, - gfp_t flags) +static struct isp1760_qh *isp1760_qh_alloc(gfp_t flags) { struct isp1760_qh *qh; @@ -334,7 +392,6 @@ static struct isp1760_qh *isp1760_qh_alloc(struct isp1760_hcd *priv, return qh; INIT_LIST_HEAD(&qh->qtd_list); - qh->priv = priv; return qh; } @@ -361,7 +418,7 @@ static int priv_init(struct usb_hcd *hcd) priv->periodic_size = DEFAULT_I_TDPS; /* controllers may cache some of the periodic schedule ... */ - hcc_params = isp1760_readl(hcd->regs + HC_HCCPARAMS); + hcc_params = reg_read32(hcd->regs, HC_HCCPARAMS); /* full frame cache */ if (HCC_ISOC_CACHE(hcc_params)) priv->i_thresh = 8; @@ -398,15 +455,15 @@ static int isp1760_hc_setup(struct usb_hcd *hcd) * Write it twice to ensure correct upper bits if switching * to 16-bit mode. */ - isp1760_writel(hwmode, hcd->regs + HC_HW_MODE_CTRL); - isp1760_writel(hwmode, hcd->regs + HC_HW_MODE_CTRL); + reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode); + reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode); - isp1760_writel(0xdeadbabe, hcd->regs + HC_SCRATCH_REG); + reg_write32(hcd->regs, HC_SCRATCH_REG, 0xdeadbabe); /* Change bus pattern */ - scratch = isp1760_readl(hcd->regs + HC_CHIP_ID_REG); - scratch = isp1760_readl(hcd->regs + HC_SCRATCH_REG); + scratch = reg_read32(hcd->regs, HC_CHIP_ID_REG); + scratch = reg_read32(hcd->regs, HC_SCRATCH_REG); if (scratch != 0xdeadbabe) { - printk(KERN_ERR "ISP1760: Scratch test failed.\n"); + dev_err(hcd->self.controller, "Scratch test failed.\n"); return -ENODEV; } @@ -414,30 +471,30 @@ static int isp1760_hc_setup(struct usb_hcd *hcd) isp1760_init_regs(hcd); /* reset */ - isp1760_writel(SW_RESET_RESET_ALL, hcd->regs + HC_RESET_REG); + reg_write32(hcd->regs, HC_RESET_REG, SW_RESET_RESET_ALL); mdelay(100); - isp1760_writel(SW_RESET_RESET_HC, hcd->regs + HC_RESET_REG); + reg_write32(hcd->regs, HC_RESET_REG, SW_RESET_RESET_HC); mdelay(100); - result = ehci_reset(priv); + result = ehci_reset(hcd); if (result) return result; /* Step 11 passed */ - isp1760_info(priv, "bus width: %d, oc: %s\n", + dev_info(hcd->self.controller, "bus width: %d, oc: %s\n", (priv->devflags & ISP1760_FLAG_BUS_WIDTH_16) ? 16 : 32, (priv->devflags & ISP1760_FLAG_ANALOG_OC) ? "analog" : "digital"); /* ATL reset */ - isp1760_writel(hwmode | ALL_ATX_RESET, hcd->regs + HC_HW_MODE_CTRL); + reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode | ALL_ATX_RESET); mdelay(10); - isp1760_writel(hwmode, hcd->regs + HC_HW_MODE_CTRL); + reg_write32(hcd->regs, HC_HW_MODE_CTRL, hwmode); - isp1760_writel(INTERRUPT_ENABLE_MASK, hcd->regs + HC_INTERRUPT_REG); - isp1760_writel(INTERRUPT_ENABLE_MASK, hcd->regs + HC_INTERRUPT_ENABLE); + reg_write32(hcd->regs, HC_INTERRUPT_REG, INTERRUPT_ENABLE_MASK); + reg_write32(hcd->regs, HC_INTERRUPT_ENABLE, INTERRUPT_ENABLE_MASK); /* * PORT 1 Control register of the ISP1760 is the OTG control @@ -445,11 +502,10 @@ static int isp1760_hc_setup(struct usb_hcd *hcd) * support in this driver, we use port 1 as a "normal" USB host port on * both chips. */ - isp1760_writel(PORT1_POWER | PORT1_INIT2, - hcd->regs + HC_PORT1_CTRL); + reg_write32(hcd->regs, HC_PORT1_CTRL, PORT1_POWER | PORT1_INIT2); mdelay(10); - priv->hcs_params = isp1760_readl(hcd->regs + HC_HCSPARAMS); + priv->hcs_params = reg_read32(hcd->regs, HC_HCSPARAMS); return priv_init(hcd); } @@ -457,25 +513,24 @@ static int isp1760_hc_setup(struct usb_hcd *hcd) static void isp1760_init_maps(struct usb_hcd *hcd) { /*set last maps, for iso its only 1, else 32 tds bitmap*/ - isp1760_writel(0x80000000, hcd->regs + HC_ATL_PTD_LASTPTD_REG); - isp1760_writel(0x80000000, hcd->regs + HC_INT_PTD_LASTPTD_REG); - isp1760_writel(0x00000001, hcd->regs + HC_ISO_PTD_LASTPTD_REG); + reg_write32(hcd->regs, HC_ATL_PTD_LASTPTD_REG, 0x80000000); + reg_write32(hcd->regs, HC_INT_PTD_LASTPTD_REG, 0x80000000); + reg_write32(hcd->regs, HC_ISO_PTD_LASTPTD_REG, 0x00000001); } static void isp1760_enable_interrupts(struct usb_hcd *hcd) { - isp1760_writel(0, hcd->regs + HC_ATL_IRQ_MASK_AND_REG); - isp1760_writel(0, hcd->regs + HC_ATL_IRQ_MASK_OR_REG); - isp1760_writel(0, hcd->regs + HC_INT_IRQ_MASK_AND_REG); - isp1760_writel(0, hcd->regs + HC_INT_IRQ_MASK_OR_REG); - isp1760_writel(0, hcd->regs + HC_ISO_IRQ_MASK_AND_REG); - isp1760_writel(0xffffffff, hcd->regs + HC_ISO_IRQ_MASK_OR_REG); + reg_write32(hcd->regs, HC_ATL_IRQ_MASK_AND_REG, 0); + reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, 0); + reg_write32(hcd->regs, HC_INT_IRQ_MASK_AND_REG, 0); + reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, 0); + reg_write32(hcd->regs, HC_ISO_IRQ_MASK_AND_REG, 0); + reg_write32(hcd->regs, HC_ISO_IRQ_MASK_OR_REG, 0xffffffff); /* step 23 passed */ } static int isp1760_run(struct usb_hcd *hcd) { - struct isp1760_hcd *priv = hcd_to_priv(hcd); int retval; u32 temp; u32 command; @@ -485,15 +540,15 @@ static int isp1760_run(struct usb_hcd *hcd) hcd->state = HC_STATE_RUNNING; isp1760_enable_interrupts(hcd); - temp = isp1760_readl(hcd->regs + HC_HW_MODE_CTRL); - isp1760_writel(temp | HW_GLOBAL_INTR_EN, hcd->regs + HC_HW_MODE_CTRL); + temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL); + reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp | HW_GLOBAL_INTR_EN); - command = isp1760_readl(hcd->regs + HC_USBCMD); + command = reg_read32(hcd->regs, HC_USBCMD); command &= ~(CMD_LRESET|CMD_RESET); command |= CMD_RUN; - isp1760_writel(command, hcd->regs + HC_USBCMD); + reg_write32(hcd->regs, HC_USBCMD, command); - retval = handshake(priv, hcd->regs + HC_USBCMD, CMD_RUN, CMD_RUN, + retval = handshake(hcd, HC_USBCMD, CMD_RUN, CMD_RUN, 250 * 1000); if (retval) return retval; @@ -504,17 +559,16 @@ static int isp1760_run(struct usb_hcd *hcd) * the semaphore while doing so. */ down_write(&ehci_cf_port_reset_rwsem); - isp1760_writel(FLAG_CF, hcd->regs + HC_CONFIGFLAG); + reg_write32(hcd->regs, HC_CONFIGFLAG, FLAG_CF); - retval = handshake(priv, hcd->regs + HC_CONFIGFLAG, FLAG_CF, FLAG_CF, - 250 * 1000); + retval = handshake(hcd, HC_CONFIGFLAG, FLAG_CF, FLAG_CF, 250 * 1000); up_write(&ehci_cf_port_reset_rwsem); if (retval) return retval; - chipid = isp1760_readl(hcd->regs + HC_CHIP_ID_REG); - isp1760_info(priv, "USB ISP %04x HW rev. %d started\n", chipid & 0xffff, - chipid >> 16); + chipid = reg_read32(hcd->regs, HC_CHIP_ID_REG); + dev_info(hcd->self.controller, "USB ISP %04x HW rev. %d started\n", + chipid & 0xffff, chipid >> 16); /* PTD Register Init Part 2, Step 28 */ /* enable INTs */ @@ -532,160 +586,156 @@ static u32 base_to_chip(u32 base) return ((base - 0x400) >> 3); } -static void transform_into_atl(struct isp1760_hcd *priv, struct isp1760_qh *qh, - struct isp1760_qtd *qtd, struct urb *urb, - u32 payload, struct ptd *ptd) +static int last_qtd_of_urb(struct isp1760_qtd *qtd, struct isp1760_qh *qh) +{ + struct urb *urb; + + if (list_is_last(&qtd->qtd_list, &qh->qtd_list)) + return 1; + + urb = qtd->urb; + qtd = list_entry(qtd->qtd_list.next, typeof(*qtd), qtd_list); + return (qtd->urb != urb); +} + +static void transform_into_atl(struct isp1760_qh *qh, + struct isp1760_qtd *qtd, struct ptd *ptd) { - u32 dw0; - u32 dw1; - u32 dw2; - u32 dw3; u32 maxpacket; u32 multi; u32 pid_code; u32 rl = RL_COUNTER; u32 nak = NAK_COUNTER; + memset(ptd, 0, sizeof(*ptd)); + /* according to 3.6.2, max packet len can not be > 0x400 */ - maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); + maxpacket = usb_maxpacket(qtd->urb->dev, qtd->urb->pipe, + usb_pipeout(qtd->urb->pipe)); multi = 1 + ((maxpacket >> 11) & 0x3); maxpacket &= 0x7ff; /* DW0 */ - dw0 = PTD_VALID; - dw0 |= PTD_LENGTH(qtd->length); - dw0 |= PTD_MAXPACKET(maxpacket); - dw0 |= PTD_ENDPOINT(usb_pipeendpoint(urb->pipe)); - dw1 = usb_pipeendpoint(urb->pipe) >> 1; + ptd->dw0 = PTD_VALID; + ptd->dw0 |= PTD_LENGTH(qtd->length); + ptd->dw0 |= PTD_MAXPACKET(maxpacket); + ptd->dw0 |= PTD_ENDPOINT(usb_pipeendpoint(qtd->urb->pipe)); /* DW1 */ - dw1 |= PTD_DEVICE_ADDR(usb_pipedevice(urb->pipe)); + ptd->dw1 = usb_pipeendpoint(qtd->urb->pipe) >> 1; + ptd->dw1 |= PTD_DEVICE_ADDR(usb_pipedevice(qtd->urb->pipe)); pid_code = qtd->packet_type; - dw1 |= PTD_PID_TOKEN(pid_code); + ptd->dw1 |= PTD_PID_TOKEN(pid_code); - if (usb_pipebulk(urb->pipe)) - dw1 |= PTD_TRANS_BULK; - else if (usb_pipeint(urb->pipe)) - dw1 |= PTD_TRANS_INT; + if (usb_pipebulk(qtd->urb->pipe)) + ptd->dw1 |= PTD_TRANS_BULK; + else if (usb_pipeint(qtd->urb->pipe)) + ptd->dw1 |= PTD_TRANS_INT; - if (urb->dev->speed != USB_SPEED_HIGH) { + if (qtd->urb->dev->speed != USB_SPEED_HIGH) { /* split transaction */ - dw1 |= PTD_TRANS_SPLIT; - if (urb->dev->speed == USB_SPEED_LOW) - dw1 |= PTD_SE_USB_LOSPEED; + ptd->dw1 |= PTD_TRANS_SPLIT; + if (qtd->urb->dev->speed == USB_SPEED_LOW) + ptd->dw1 |= PTD_SE_USB_LOSPEED; - dw1 |= PTD_PORT_NUM(urb->dev->ttport); - dw1 |= PTD_HUB_NUM(urb->dev->tt->hub->devnum); + ptd->dw1 |= PTD_PORT_NUM(qtd->urb->dev->ttport); + ptd->dw1 |= PTD_HUB_NUM(qtd->urb->dev->tt->hub->devnum); /* SE bit for Split INT transfers */ - if (usb_pipeint(urb->pipe) && - (urb->dev->speed == USB_SPEED_LOW)) - dw1 |= 2 << 16; + if (usb_pipeint(qtd->urb->pipe) && + (qtd->urb->dev->speed == USB_SPEED_LOW)) + ptd->dw1 |= 2 << 16; - dw3 = 0; + ptd->dw3 = 0; rl = 0; nak = 0; } else { - dw0 |= PTD_MULTI(multi); - if (usb_pipecontrol(urb->pipe) || usb_pipebulk(urb->pipe)) - dw3 = qh->ping; + ptd->dw0 |= PTD_MULTI(multi); + if (usb_pipecontrol(qtd->urb->pipe) || + usb_pipebulk(qtd->urb->pipe)) + ptd->dw3 = qh->ping; else - dw3 = 0; + ptd->dw3 = 0; } /* DW2 */ - dw2 = 0; - dw2 |= PTD_DATA_START_ADDR(base_to_chip(payload)); - dw2 |= PTD_RL_CNT(rl); - dw3 |= PTD_NAC_CNT(nak); + ptd->dw2 = 0; + ptd->dw2 |= PTD_DATA_START_ADDR(base_to_chip(qtd->payload_addr)); + ptd->dw2 |= PTD_RL_CNT(rl); + ptd->dw3 |= PTD_NAC_CNT(nak); /* DW3 */ - if (usb_pipecontrol(urb->pipe)) - dw3 |= PTD_DATA_TOGGLE(qtd->toggle); - else - dw3 |= qh->toggle; - + ptd->dw3 |= qh->toggle; + if (usb_pipecontrol(qtd->urb->pipe)) { + if (qtd->data_buffer == qtd->urb->setup_packet) + ptd->dw3 &= ~PTD_DATA_TOGGLE(1); + else if (last_qtd_of_urb(qtd, qh)) + ptd->dw3 |= PTD_DATA_TOGGLE(1); + } - dw3 |= PTD_ACTIVE; + ptd->dw3 |= PTD_ACTIVE; /* Cerr */ - dw3 |= PTD_CERR(ERR_COUNTER); - - memset(ptd, 0, sizeof(*ptd)); - - ptd->dw0 = cpu_to_le32(dw0); - ptd->dw1 = cpu_to_le32(dw1); - ptd->dw2 = cpu_to_le32(dw2); - ptd->dw3 = cpu_to_le32(dw3); + ptd->dw3 |= PTD_CERR(ERR_COUNTER); } -static void transform_add_int(struct isp1760_hcd *priv, struct isp1760_qh *qh, - struct isp1760_qtd *qtd, struct urb *urb, - u32 payload, struct ptd *ptd) +static void transform_add_int(struct isp1760_qh *qh, + struct isp1760_qtd *qtd, struct ptd *ptd) { - u32 maxpacket; - u32 multi; - u32 numberofusofs; - u32 i; - u32 usofmask, usof; + u32 usof; u32 period; - maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); - multi = 1 + ((maxpacket >> 11) & 0x3); - maxpacket &= 0x7ff; - /* length of the data per uframe */ - maxpacket = multi * maxpacket; - - numberofusofs = urb->transfer_buffer_length / maxpacket; - if (urb->transfer_buffer_length % maxpacket) - numberofusofs += 1; - - usofmask = 1; - usof = 0; - for (i = 0; i < numberofusofs; i++) { - usof |= usofmask; - usofmask <<= 1; - } - - if (urb->dev->speed != USB_SPEED_HIGH) { - /* split */ - ptd->dw5 = cpu_to_le32(0x1c); + /* + * Most of this is guessing. ISP1761 datasheet is quite unclear, and + * the algorithm from the original Philips driver code, which was + * pretty much used in this driver before as well, is quite horrendous + * and, i believe, incorrect. The code below follows the datasheet and + * USB2.0 spec as far as I can tell, and plug/unplug seems to be much + * more reliable this way (fingers crossed...). + */ - if (qh->period >= 32) - period = qh->period / 2; + if (qtd->urb->dev->speed == USB_SPEED_HIGH) { + /* urb->interval is in units of microframes (1/8 ms) */ + period = qtd->urb->interval >> 3; + + if (qtd->urb->interval > 4) + usof = 0x01; /* One bit set => + interval 1 ms * uFrame-match */ + else if (qtd->urb->interval > 2) + usof = 0x22; /* Two bits set => interval 1/2 ms */ + else if (qtd->urb->interval > 1) + usof = 0x55; /* Four bits set => interval 1/4 ms */ else - period = qh->period; - + usof = 0xff; /* All bits set => interval 1/8 ms */ } else { + /* urb->interval is in units of frames (1 ms) */ + period = qtd->urb->interval; + usof = 0x0f; /* Execute Start Split on any of the + four first uFrames */ - if (qh->period >= 8) - period = qh->period/8; - else - period = qh->period; - - if (period >= 32) - period = 16; - - if (qh->period >= 8) { - /* millisecond period */ - period = (period << 3); - } else { - /* usof based tranmsfers */ - /* minimum 4 usofs */ - usof = 0x11; - } + /* + * First 8 bits in dw5 is uSCS and "specifies which uSOF the + * complete split needs to be sent. Valid only for IN." Also, + * "All bits can be set to one for every transfer." (p 82, + * ISP1761 data sheet.) 0x1c is from Philips driver. Where did + * that number come from? 0xff seems to work fine... + */ + /* ptd->dw5 = 0x1c; */ + ptd->dw5 = 0xff; /* Execute Complete Split on any uFrame */ } - ptd->dw2 |= cpu_to_le32(period); - ptd->dw4 = cpu_to_le32(usof); + period = period >> 1;/* Ensure equal or shorter period than requested */ + period &= 0xf8; /* Mask off too large values and lowest unused 3 bits */ + + ptd->dw2 |= period; + ptd->dw4 = usof; } -static void transform_into_int(struct isp1760_hcd *priv, struct isp1760_qh *qh, - struct isp1760_qtd *qtd, struct urb *urb, - u32 payload, struct ptd *ptd) +static void transform_into_int(struct isp1760_qh *qh, + struct isp1760_qtd *qtd, struct ptd *ptd) { - transform_into_atl(priv, qh, qtd, urb, payload, ptd); - transform_add_int(priv, qh, qtd, urb, payload, ptd); + transform_into_atl(qh, qtd, ptd); + transform_add_int(qh, qtd, ptd); } static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len, @@ -695,10 +745,9 @@ static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len, qtd->data_buffer = databuffer; qtd->packet_type = GET_QTD_TOKEN_TYPE(token); - qtd->toggle = GET_DATA_TOGGLE(token); - if (len > HC_ATL_PL_SIZE) - count = HC_ATL_PL_SIZE; + if (len > MAX_PAYLOAD_SIZE) + count = MAX_PAYLOAD_SIZE; else count = len; @@ -706,29 +755,27 @@ static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len, return count; } -static int check_error(struct ptd *ptd) +static int check_error(struct usb_hcd *hcd, struct ptd *ptd) { int error = 0; - u32 dw3; - dw3 = le32_to_cpu(ptd->dw3); - if (dw3 & DW3_HALT_BIT) { + if (ptd->dw3 & DW3_HALT_BIT) { error = -EPIPE; - if (dw3 & DW3_ERROR_BIT) + if (ptd->dw3 & DW3_ERROR_BIT) pr_err("error bit is set in DW3\n"); } - if (dw3 & DW3_QTD_ACTIVE) { - printk(KERN_ERR "transfer active bit is set DW3\n"); - printk(KERN_ERR "nak counter: %d, rl: %d\n", (dw3 >> 19) & 0xf, - (le32_to_cpu(ptd->dw2) >> 25) & 0xf); + if (ptd->dw3 & DW3_QTD_ACTIVE) { + dev_err(hcd->self.controller, "Transfer active bit is set DW3\n" + "nak counter: %d, rl: %d\n", + (ptd->dw3 >> 19) & 0xf, (ptd->dw2 >> 25) & 0xf); } return error; } -static void check_int_err_status(u32 dw4) +static void check_int_err_status(struct usb_hcd *hcd, u32 dw4) { u32 i; @@ -737,79 +784,67 @@ static void check_int_err_status(u32 dw4) for (i = 0; i < 8; i++) { switch (dw4 & 0x7) { case INT_UNDERRUN: - printk(KERN_ERR "ERROR: under run , %d\n", i); + dev_err(hcd->self.controller, "Underrun (%d)\n", i); break; case INT_EXACT: - printk(KERN_ERR "ERROR: transaction error, %d\n", i); + dev_err(hcd->self.controller, + "Transaction error (%d)\n", i); break; case INT_BABBLE: - printk(KERN_ERR "ERROR: babble error, %d\n", i); + dev_err(hcd->self.controller, "Babble error (%d)\n", i); break; } dw4 >>= 3; } } -static void enqueue_one_qtd(struct isp1760_qtd *qtd, struct isp1760_hcd *priv, - u32 payload) +static void enqueue_one_qtd(struct usb_hcd *hcd, struct isp1760_qtd *qtd) { - u32 token; - struct usb_hcd *hcd = priv_to_hcd(priv); - - token = qtd->packet_type; - - if (qtd->length && (qtd->length <= HC_ATL_PL_SIZE)) { - switch (token) { + if (qtd->length && (qtd->length <= MAX_PAYLOAD_SIZE)) { + switch (qtd->packet_type) { case IN_PID: break; case OUT_PID: case SETUP_PID: - priv_write_copy(priv, qtd->data_buffer, - hcd->regs + payload, - qtd->length); + mem_writes8(hcd->regs, qtd->payload_addr, + qtd->data_buffer, qtd->length); } } } -static void enqueue_one_atl_qtd(u32 atl_regs, u32 payload, - struct isp1760_hcd *priv, struct isp1760_qh *qh, - struct urb *urb, u32 slot, struct isp1760_qtd *qtd) +static void enqueue_one_atl_qtd(struct usb_hcd *hcd, struct isp1760_qh *qh, + u32 slot, struct isp1760_qtd *qtd) { + struct isp1760_hcd *priv = hcd_to_priv(hcd); struct ptd ptd; - struct usb_hcd *hcd = priv_to_hcd(priv); - transform_into_atl(priv, qh, qtd, urb, payload, &ptd); - priv_write_copy(priv, (u32 *)&ptd, hcd->regs + atl_regs, sizeof(ptd)); - enqueue_one_qtd(qtd, priv, payload); + alloc_mem(hcd, qtd); + transform_into_atl(qh, qtd, &ptd); + ptd_write(hcd->regs, ATL_PTD_OFFSET, slot, &ptd); + enqueue_one_qtd(hcd, qtd); - priv->atl_ints[slot].urb = urb; priv->atl_ints[slot].qh = qh; priv->atl_ints[slot].qtd = qtd; - priv->atl_ints[slot].data_buffer = qtd->data_buffer; - priv->atl_ints[slot].payload = payload; - qtd->status |= URB_ENQUEUED | URB_TYPE_ATL; + qtd->status |= URB_ENQUEUED; qtd->status |= slot << 16; } -static void enqueue_one_int_qtd(u32 int_regs, u32 payload, - struct isp1760_hcd *priv, struct isp1760_qh *qh, - struct urb *urb, u32 slot, struct isp1760_qtd *qtd) +static void enqueue_one_int_qtd(struct usb_hcd *hcd, struct isp1760_qh *qh, + u32 slot, struct isp1760_qtd *qtd) { + struct isp1760_hcd *priv = hcd_to_priv(hcd); struct ptd ptd; - struct usb_hcd *hcd = priv_to_hcd(priv); - transform_into_int(priv, qh, qtd, urb, payload, &ptd); - priv_write_copy(priv, (u32 *)&ptd, hcd->regs + int_regs, sizeof(ptd)); - enqueue_one_qtd(qtd, priv, payload); + alloc_mem(hcd, qtd); + transform_into_int(qh, qtd, &ptd); + ptd_write(hcd->regs, INT_PTD_OFFSET, slot, &ptd); + enqueue_one_qtd(hcd, qtd); - priv->int_ints[slot].urb = urb; priv->int_ints[slot].qh = qh; priv->int_ints[slot].qtd = qtd; - priv->int_ints[slot].data_buffer = qtd->data_buffer; - priv->int_ints[slot].payload = payload; - qtd->status |= URB_ENQUEUED | URB_TYPE_INT; + qtd->status |= URB_ENQUEUED; qtd->status |= slot << 16; } @@ -818,9 +853,7 @@ static void enqueue_an_ATL_packet(struct usb_hcd *hcd, struct isp1760_qh *qh, { struct isp1760_hcd *priv = hcd_to_priv(hcd); u32 skip_map, or_map; - u32 queue_entry; u32 slot; - u32 atl_regs, payload; u32 buffstatus; /* @@ -831,38 +864,35 @@ static void enqueue_an_ATL_packet(struct usb_hcd *hcd, struct isp1760_qh *qh, */ mmiowb(); ndelay(195); - skip_map = isp1760_readl(hcd->regs + HC_ATL_PTD_SKIPMAP_REG); + skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG); BUG_ON(!skip_map); slot = __ffs(skip_map); - queue_entry = 1 << slot; - - atl_regs = ATL_REGS_OFFSET + slot * sizeof(struct ptd); - payload = alloc_mem(priv, qtd->length); + enqueue_one_atl_qtd(hcd, qh, slot, qtd); - enqueue_one_atl_qtd(atl_regs, payload, priv, qh, qtd->urb, slot, qtd); + or_map = reg_read32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG); + or_map |= (1 << slot); + reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, or_map); - or_map = isp1760_readl(hcd->regs + HC_ATL_IRQ_MASK_OR_REG); - or_map |= queue_entry; - isp1760_writel(or_map, hcd->regs + HC_ATL_IRQ_MASK_OR_REG); + skip_map &= ~(1 << slot); + reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map); - skip_map &= ~queue_entry; - isp1760_writel(skip_map, hcd->regs + HC_ATL_PTD_SKIPMAP_REG); + priv->atl_queued++; + if (priv->atl_queued == 2) + reg_write32(hcd->regs, HC_INTERRUPT_ENABLE, + INTERRUPT_ENABLE_SOT_MASK); - buffstatus = isp1760_readl(hcd->regs + HC_BUFFER_STATUS_REG); + buffstatus = reg_read32(hcd->regs, HC_BUFFER_STATUS_REG); buffstatus |= ATL_BUFFER; - isp1760_writel(buffstatus, hcd->regs + HC_BUFFER_STATUS_REG); + reg_write32(hcd->regs, HC_BUFFER_STATUS_REG, buffstatus); } static void enqueue_an_INT_packet(struct usb_hcd *hcd, struct isp1760_qh *qh, struct isp1760_qtd *qtd) { - struct isp1760_hcd *priv = hcd_to_priv(hcd); u32 skip_map, or_map; - u32 queue_entry; u32 slot; - u32 int_regs, payload; u32 buffstatus; /* @@ -873,37 +903,34 @@ static void enqueue_an_INT_packet(struct usb_hcd *hcd, struct isp1760_qh *qh, */ mmiowb(); ndelay(195); - skip_map = isp1760_readl(hcd->regs + HC_INT_PTD_SKIPMAP_REG); + skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG); BUG_ON(!skip_map); slot = __ffs(skip_map); - queue_entry = 1 << slot; - - int_regs = INT_REGS_OFFSET + slot * sizeof(struct ptd); - payload = alloc_mem(priv, qtd->length); + enqueue_one_int_qtd(hcd, qh, slot, qtd); - enqueue_one_int_qtd(int_regs, payload, priv, qh, qtd->urb, slot, qtd); + or_map = reg_read32(hcd->regs, HC_INT_IRQ_MASK_OR_REG); + or_map |= (1 << slot); + reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, or_map); - or_map = isp1760_readl(hcd->regs + HC_INT_IRQ_MASK_OR_REG); - or_map |= queue_entry; - isp1760_writel(or_map, hcd->regs + HC_INT_IRQ_MASK_OR_REG); + skip_map &= ~(1 << slot); + reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, skip_map); - skip_map &= ~queue_entry; - isp1760_writel(skip_map, hcd->regs + HC_INT_PTD_SKIPMAP_REG); - - buffstatus = isp1760_readl(hcd->regs + HC_BUFFER_STATUS_REG); + buffstatus = reg_read32(hcd->regs, HC_BUFFER_STATUS_REG); buffstatus |= INT_BUFFER; - isp1760_writel(buffstatus, hcd->regs + HC_BUFFER_STATUS_REG); + reg_write32(hcd->regs, HC_BUFFER_STATUS_REG, buffstatus); } -static void isp1760_urb_done(struct isp1760_hcd *priv, struct urb *urb, int status) +static void isp1760_urb_done(struct usb_hcd *hcd, struct urb *urb) __releases(priv->lock) __acquires(priv->lock) { + struct isp1760_hcd *priv = hcd_to_priv(hcd); + if (!urb->unlinked) { - if (status == -EINPROGRESS) - status = 0; + if (urb->status == -EINPROGRESS) + urb->status = 0; } if (usb_pipein(urb->pipe) && usb_pipetype(urb->pipe) != PIPE_CONTROL) { @@ -915,22 +942,28 @@ __acquires(priv->lock) } /* complete() can reenter this HCD */ - usb_hcd_unlink_urb_from_ep(priv_to_hcd(priv), urb); + usb_hcd_unlink_urb_from_ep(hcd, urb); spin_unlock(&priv->lock); - usb_hcd_giveback_urb(priv_to_hcd(priv), urb, status); + usb_hcd_giveback_urb(hcd, urb, urb->status); spin_lock(&priv->lock); } static void isp1760_qtd_free(struct isp1760_qtd *qtd) { + BUG_ON(qtd->payload_addr); kmem_cache_free(qtd_cachep, qtd); } -static struct isp1760_qtd *clean_this_qtd(struct isp1760_qtd *qtd) +static struct isp1760_qtd *clean_this_qtd(struct isp1760_qtd *qtd, + struct isp1760_qh *qh) { struct isp1760_qtd *tmp_qtd; - tmp_qtd = qtd->hw_next; + if (list_is_last(&qtd->qtd_list, &qh->qtd_list)) + tmp_qtd = NULL; + else + tmp_qtd = list_entry(qtd->qtd_list.next, struct isp1760_qtd, + qtd_list); list_del(&qtd->qtd_list); isp1760_qtd_free(qtd); return tmp_qtd; @@ -941,32 +974,26 @@ static struct isp1760_qtd *clean_this_qtd(struct isp1760_qtd *qtd) * isn't the last one than remove also his successor(s). * Returns the QTD which is part of an new URB and should be enqueued. */ -static struct isp1760_qtd *clean_up_qtdlist(struct isp1760_qtd *qtd) +static struct isp1760_qtd *clean_up_qtdlist(struct isp1760_qtd *qtd, + struct isp1760_qh *qh) { - struct isp1760_qtd *tmp_qtd; - int last_one; + struct urb *urb; + urb = qtd->urb; do { - tmp_qtd = qtd->hw_next; - last_one = qtd->status & URB_COMPLETE_NOTIFY; - list_del(&qtd->qtd_list); - isp1760_qtd_free(qtd); - qtd = tmp_qtd; - } while (!last_one && qtd); + qtd = clean_this_qtd(qtd, qh); + } while (qtd && (qtd->urb == urb)); return qtd; } -static void do_atl_int(struct usb_hcd *usb_hcd) +static void do_atl_int(struct usb_hcd *hcd) { - struct isp1760_hcd *priv = hcd_to_priv(usb_hcd); + struct isp1760_hcd *priv = hcd_to_priv(hcd); u32 done_map, skip_map; struct ptd ptd; - struct urb *urb = NULL; - u32 atl_regs_base; - u32 atl_regs; - u32 queue_entry; - u32 payload; + struct urb *urb; + u32 slot; u32 length; u32 or_map; u32 status = -EINVAL; @@ -976,62 +1003,36 @@ static void do_atl_int(struct usb_hcd *usb_hcd) u32 rl; u32 nakcount; - done_map = isp1760_readl(usb_hcd->regs + - HC_ATL_PTD_DONEMAP_REG); - skip_map = isp1760_readl(usb_hcd->regs + - HC_ATL_PTD_SKIPMAP_REG); + done_map = reg_read32(hcd->regs, HC_ATL_PTD_DONEMAP_REG); + skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG); - or_map = isp1760_readl(usb_hcd->regs + HC_ATL_IRQ_MASK_OR_REG); + or_map = reg_read32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG); or_map &= ~done_map; - isp1760_writel(or_map, usb_hcd->regs + HC_ATL_IRQ_MASK_OR_REG); + reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, or_map); - atl_regs_base = ATL_REGS_OFFSET; while (done_map) { - u32 dw1; - u32 dw2; - u32 dw3; - status = 0; + priv->atl_queued--; - queue_entry = __ffs(done_map); - done_map &= ~(1 << queue_entry); - skip_map |= 1 << queue_entry; - - atl_regs = atl_regs_base + queue_entry * sizeof(struct ptd); + slot = __ffs(done_map); + done_map &= ~(1 << slot); + skip_map |= (1 << slot); - urb = priv->atl_ints[queue_entry].urb; - qtd = priv->atl_ints[queue_entry].qtd; - qh = priv->atl_ints[queue_entry].qh; - payload = priv->atl_ints[queue_entry].payload; + qtd = priv->atl_ints[slot].qtd; + qh = priv->atl_ints[slot].qh; if (!qh) { - printk(KERN_ERR "qh is 0\n"); + dev_err(hcd->self.controller, "qh is 0\n"); continue; } - isp1760_writel(atl_regs + ISP_BANK(0), usb_hcd->regs + - HC_MEMORY_REG); - isp1760_writel(payload + ISP_BANK(1), usb_hcd->regs + - HC_MEMORY_REG); - /* - * write bank1 address twice to ensure the 90ns delay (time - * between BANK0 write and the priv_read_copy() call is at - * least 3*t_WHWL + 2*t_w11 = 3*25ns + 2*17ns = 109ns) - */ - isp1760_writel(payload + ISP_BANK(1), usb_hcd->regs + - HC_MEMORY_REG); + ptd_read(hcd->regs, ATL_PTD_OFFSET, slot, &ptd); - priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + atl_regs + - ISP_BANK(0), sizeof(ptd)); - - dw1 = le32_to_cpu(ptd.dw1); - dw2 = le32_to_cpu(ptd.dw2); - dw3 = le32_to_cpu(ptd.dw3); - rl = (dw2 >> 25) & 0x0f; - nakcount = (dw3 >> 19) & 0xf; + rl = (ptd.dw2 >> 25) & 0x0f; + nakcount = (ptd.dw3 >> 19) & 0xf; /* Transfer Error, *but* active and no HALT -> reload */ - if ((dw3 & DW3_ERROR_BIT) && (dw3 & DW3_QTD_ACTIVE) && - !(dw3 & DW3_HALT_BIT)) { + if ((ptd.dw3 & DW3_ERROR_BIT) && (ptd.dw3 & DW3_QTD_ACTIVE) && + !(ptd.dw3 & DW3_HALT_BIT)) { /* according to ppriv code, we have to * reload this one if trasfered bytes != requested bytes @@ -1040,13 +1041,14 @@ static void do_atl_int(struct usb_hcd *usb_hcd) * triggered so far. */ - length = PTD_XFERRED_LENGTH(dw3); - printk(KERN_ERR "Should reload now.... transfered %d " + length = PTD_XFERRED_LENGTH(ptd.dw3); + dev_err(hcd->self.controller, + "Should reload now... transferred %d " "of %zu\n", length, qtd->length); BUG(); } - if (!nakcount && (dw3 & DW3_QTD_ACTIVE)) { + if (!nakcount && (ptd.dw3 & DW3_QTD_ACTIVE)) { u32 buffstatus; /* @@ -1054,52 +1056,45 @@ static void do_atl_int(struct usb_hcd *usb_hcd) * device is not able to send data fast enough. * This happens mostly on slower hardware. */ - printk(KERN_NOTICE "Reloading ptd %p/%p... qh %p read: " - "%d of %zu done: %08x cur: %08x\n", qtd, - urb, qh, PTD_XFERRED_LENGTH(dw3), - qtd->length, done_map, - (1 << queue_entry)); /* RL counter = ERR counter */ - dw3 &= ~(0xf << 19); - dw3 |= rl << 19; - dw3 &= ~(3 << (55 - 32)); - dw3 |= ERR_COUNTER << (55 - 32); + ptd.dw3 &= ~(0xf << 19); + ptd.dw3 |= rl << 19; + ptd.dw3 &= ~(3 << (55 - 32)); + ptd.dw3 |= ERR_COUNTER << (55 - 32); /* * It is not needed to write skip map back because it * is unchanged. Just make sure that this entry is * unskipped once it gets written to the HW. */ - skip_map &= ~(1 << queue_entry); - or_map = isp1760_readl(usb_hcd->regs + - HC_ATL_IRQ_MASK_OR_REG); - or_map |= 1 << queue_entry; - isp1760_writel(or_map, usb_hcd->regs + - HC_ATL_IRQ_MASK_OR_REG); - - ptd.dw3 = cpu_to_le32(dw3); - priv_write_copy(priv, (u32 *)&ptd, usb_hcd->regs + - atl_regs, sizeof(ptd)); - - ptd.dw0 |= cpu_to_le32(PTD_VALID); - priv_write_copy(priv, (u32 *)&ptd, usb_hcd->regs + - atl_regs, sizeof(ptd)); - - buffstatus = isp1760_readl(usb_hcd->regs + - HC_BUFFER_STATUS_REG); + skip_map &= ~(1 << slot); + or_map = reg_read32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG); + or_map |= 1 << slot; + reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, or_map); + + ptd.dw0 |= PTD_VALID; + ptd_write(hcd->regs, ATL_PTD_OFFSET, slot, &ptd); + + priv->atl_queued++; + if (priv->atl_queued == 2) + reg_write32(hcd->regs, HC_INTERRUPT_ENABLE, + INTERRUPT_ENABLE_SOT_MASK); + + buffstatus = reg_read32(hcd->regs, + HC_BUFFER_STATUS_REG); buffstatus |= ATL_BUFFER; - isp1760_writel(buffstatus, usb_hcd->regs + - HC_BUFFER_STATUS_REG); + reg_write32(hcd->regs, HC_BUFFER_STATUS_REG, + buffstatus); continue; } - error = check_error(&ptd); + error = check_error(hcd, &ptd); if (error) { status = error; - priv->atl_ints[queue_entry].qh->toggle = 0; - priv->atl_ints[queue_entry].qh->ping = 0; - urb->status = -EPIPE; + priv->atl_ints[slot].qh->toggle = 0; + priv->atl_ints[slot].qh->ping = 0; + qtd->urb->status = -EPIPE; #if 0 printk(KERN_ERR "Error in %s().\n", __func__); @@ -1110,154 +1105,123 @@ static void do_atl_int(struct usb_hcd *usb_hcd) ptd.dw4, ptd.dw5, ptd.dw6, ptd.dw7); #endif } else { - if (usb_pipetype(urb->pipe) == PIPE_BULK) { - priv->atl_ints[queue_entry].qh->toggle = dw3 & - (1 << 25); - priv->atl_ints[queue_entry].qh->ping = dw3 & - (1 << 26); - } + priv->atl_ints[slot].qh->toggle = ptd.dw3 & (1 << 25); + priv->atl_ints[slot].qh->ping = ptd.dw3 & (1 << 26); } - length = PTD_XFERRED_LENGTH(dw3); + length = PTD_XFERRED_LENGTH(ptd.dw3); if (length) { - switch (DW1_GET_PID(dw1)) { + switch (DW1_GET_PID(ptd.dw1)) { case IN_PID: - priv_read_copy(priv, - priv->atl_ints[queue_entry].data_buffer, - usb_hcd->regs + payload + ISP_BANK(1), - length); + mem_reads8(hcd->regs, qtd->payload_addr, + qtd->data_buffer, length); case OUT_PID: - urb->actual_length += length; + qtd->urb->actual_length += length; case SETUP_PID: break; } } - priv->atl_ints[queue_entry].data_buffer = NULL; - priv->atl_ints[queue_entry].urb = NULL; - priv->atl_ints[queue_entry].qtd = NULL; - priv->atl_ints[queue_entry].qh = NULL; + priv->atl_ints[slot].qtd = NULL; + priv->atl_ints[slot].qh = NULL; - free_mem(priv, payload); + free_mem(hcd, qtd); - isp1760_writel(skip_map, usb_hcd->regs + - HC_ATL_PTD_SKIPMAP_REG); + reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map); - if (urb->status == -EPIPE) { + if (qtd->urb->status == -EPIPE) { /* HALT was received */ - qtd = clean_up_qtdlist(qtd); - isp1760_urb_done(priv, urb, urb->status); + urb = qtd->urb; + qtd = clean_up_qtdlist(qtd, qh); + isp1760_urb_done(hcd, urb); - } else if (usb_pipebulk(urb->pipe) && (length < qtd->length)) { + } else if (usb_pipebulk(qtd->urb->pipe) && + (length < qtd->length)) { /* short BULK received */ - if (urb->transfer_flags & URB_SHORT_NOT_OK) { - urb->status = -EREMOTEIO; - isp1760_dbg(priv, "short bulk, %d instead %zu " - "with URB_SHORT_NOT_OK flag.\n", - length, qtd->length); + if (qtd->urb->transfer_flags & URB_SHORT_NOT_OK) { + qtd->urb->status = -EREMOTEIO; + dev_dbg(hcd->self.controller, + "short bulk, %d instead %zu " + "with URB_SHORT_NOT_OK flag.\n", + length, qtd->length); } - if (urb->status == -EINPROGRESS) - urb->status = 0; - - qtd = clean_up_qtdlist(qtd); + if (qtd->urb->status == -EINPROGRESS) + qtd->urb->status = 0; - isp1760_urb_done(priv, urb, urb->status); + urb = qtd->urb; + qtd = clean_up_qtdlist(qtd, qh); + isp1760_urb_done(hcd, urb); - } else if (qtd->status & URB_COMPLETE_NOTIFY) { + } else if (last_qtd_of_urb(qtd, qh)) { /* that was the last qtd of that URB */ - if (urb->status == -EINPROGRESS) - urb->status = 0; + if (qtd->urb->status == -EINPROGRESS) + qtd->urb->status = 0; - qtd = clean_this_qtd(qtd); - isp1760_urb_done(priv, urb, urb->status); + urb = qtd->urb; + qtd = clean_up_qtdlist(qtd, qh); + isp1760_urb_done(hcd, urb); } else { /* next QTD of this URB */ - qtd = clean_this_qtd(qtd); + qtd = clean_this_qtd(qtd, qh); BUG_ON(!qtd); } if (qtd) - enqueue_an_ATL_packet(usb_hcd, qh, qtd); + enqueue_an_ATL_packet(hcd, qh, qtd); - skip_map = isp1760_readl(usb_hcd->regs + - HC_ATL_PTD_SKIPMAP_REG); + skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG); } + if (priv->atl_queued <= 1) + reg_write32(hcd->regs, HC_INTERRUPT_ENABLE, + INTERRUPT_ENABLE_MASK); } -static void do_intl_int(struct usb_hcd *usb_hcd) +static void do_intl_int(struct usb_hcd *hcd) { - struct isp1760_hcd *priv = hcd_to_priv(usb_hcd); + struct isp1760_hcd *priv = hcd_to_priv(hcd); u32 done_map, skip_map; struct ptd ptd; - struct urb *urb = NULL; - u32 int_regs; - u32 int_regs_base; - u32 payload; + struct urb *urb; u32 length; u32 or_map; int error; - u32 queue_entry; + u32 slot; struct isp1760_qtd *qtd; struct isp1760_qh *qh; - done_map = isp1760_readl(usb_hcd->regs + - HC_INT_PTD_DONEMAP_REG); - skip_map = isp1760_readl(usb_hcd->regs + - HC_INT_PTD_SKIPMAP_REG); + done_map = reg_read32(hcd->regs, HC_INT_PTD_DONEMAP_REG); + skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG); - or_map = isp1760_readl(usb_hcd->regs + HC_INT_IRQ_MASK_OR_REG); + or_map = reg_read32(hcd->regs, HC_INT_IRQ_MASK_OR_REG); or_map &= ~done_map; - isp1760_writel(or_map, usb_hcd->regs + HC_INT_IRQ_MASK_OR_REG); - - int_regs_base = INT_REGS_OFFSET; + reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, or_map); while (done_map) { - u32 dw1; - u32 dw3; + slot = __ffs(done_map); + done_map &= ~(1 << slot); + skip_map |= (1 << slot); - queue_entry = __ffs(done_map); - done_map &= ~(1 << queue_entry); - skip_map |= 1 << queue_entry; - - int_regs = int_regs_base + queue_entry * sizeof(struct ptd); - urb = priv->int_ints[queue_entry].urb; - qtd = priv->int_ints[queue_entry].qtd; - qh = priv->int_ints[queue_entry].qh; - payload = priv->int_ints[queue_entry].payload; + qtd = priv->int_ints[slot].qtd; + qh = priv->int_ints[slot].qh; if (!qh) { - printk(KERN_ERR "(INT) qh is 0\n"); + dev_err(hcd->self.controller, "(INT) qh is 0\n"); continue; } - isp1760_writel(int_regs + ISP_BANK(0), usb_hcd->regs + - HC_MEMORY_REG); - isp1760_writel(payload + ISP_BANK(1), usb_hcd->regs + - HC_MEMORY_REG); - /* - * write bank1 address twice to ensure the 90ns delay (time - * between BANK0 write and the priv_read_copy() call is at - * least 3*t_WHWL + 2*t_w11 = 3*25ns + 2*17ns = 92ns) - */ - isp1760_writel(payload + ISP_BANK(1), usb_hcd->regs + - HC_MEMORY_REG); + ptd_read(hcd->regs, INT_PTD_OFFSET, slot, &ptd); + check_int_err_status(hcd, ptd.dw4); - priv_read_copy(priv, (u32 *)&ptd, usb_hcd->regs + int_regs + - ISP_BANK(0), sizeof(ptd)); - dw1 = le32_to_cpu(ptd.dw1); - dw3 = le32_to_cpu(ptd.dw3); - check_int_err_status(le32_to_cpu(ptd.dw4)); - - error = check_error(&ptd); + error = check_error(hcd, &ptd); if (error) { #if 0 printk(KERN_ERR "Error in %s().\n", __func__); @@ -1267,83 +1231,77 @@ static void do_intl_int(struct usb_hcd *usb_hcd) ptd.dw0, ptd.dw1, ptd.dw2, ptd.dw3, ptd.dw4, ptd.dw5, ptd.dw6, ptd.dw7); #endif - urb->status = -EPIPE; - priv->int_ints[queue_entry].qh->toggle = 0; - priv->int_ints[queue_entry].qh->ping = 0; + qtd->urb->status = -EPIPE; + priv->int_ints[slot].qh->toggle = 0; + priv->int_ints[slot].qh->ping = 0; } else { - priv->int_ints[queue_entry].qh->toggle = - dw3 & (1 << 25); - priv->int_ints[queue_entry].qh->ping = dw3 & (1 << 26); + priv->int_ints[slot].qh->toggle = ptd.dw3 & (1 << 25); + priv->int_ints[slot].qh->ping = ptd.dw3 & (1 << 26); } - if (urb->dev->speed != USB_SPEED_HIGH) - length = PTD_XFERRED_LENGTH_LO(dw3); + if (qtd->urb->dev->speed != USB_SPEED_HIGH) + length = PTD_XFERRED_LENGTH_LO(ptd.dw3); else - length = PTD_XFERRED_LENGTH(dw3); + length = PTD_XFERRED_LENGTH(ptd.dw3); if (length) { - switch (DW1_GET_PID(dw1)) { + switch (DW1_GET_PID(ptd.dw1)) { case IN_PID: - priv_read_copy(priv, - priv->int_ints[queue_entry].data_buffer, - usb_hcd->regs + payload + ISP_BANK(1), - length); + mem_reads8(hcd->regs, qtd->payload_addr, + qtd->data_buffer, length); case OUT_PID: - urb->actual_length += length; + qtd->urb->actual_length += length; case SETUP_PID: break; } } - priv->int_ints[queue_entry].data_buffer = NULL; - priv->int_ints[queue_entry].urb = NULL; - priv->int_ints[queue_entry].qtd = NULL; - priv->int_ints[queue_entry].qh = NULL; + priv->int_ints[slot].qtd = NULL; + priv->int_ints[slot].qh = NULL; - isp1760_writel(skip_map, usb_hcd->regs + - HC_INT_PTD_SKIPMAP_REG); - free_mem(priv, payload); + reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, skip_map); + free_mem(hcd, qtd); - if (urb->status == -EPIPE) { + if (qtd->urb->status == -EPIPE) { /* HALT received */ - qtd = clean_up_qtdlist(qtd); - isp1760_urb_done(priv, urb, urb->status); + urb = qtd->urb; + qtd = clean_up_qtdlist(qtd, qh); + isp1760_urb_done(hcd, urb); - } else if (qtd->status & URB_COMPLETE_NOTIFY) { + } else if (last_qtd_of_urb(qtd, qh)) { - if (urb->status == -EINPROGRESS) - urb->status = 0; + if (qtd->urb->status == -EINPROGRESS) + qtd->urb->status = 0; - qtd = clean_this_qtd(qtd); - isp1760_urb_done(priv, urb, urb->status); + urb = qtd->urb; + qtd = clean_up_qtdlist(qtd, qh); + isp1760_urb_done(hcd, urb); } else { /* next QTD of this URB */ - qtd = clean_this_qtd(qtd); + qtd = clean_this_qtd(qtd, qh); BUG_ON(!qtd); } if (qtd) - enqueue_an_INT_packet(usb_hcd, qh, qtd); + enqueue_an_INT_packet(hcd, qh, qtd); - skip_map = isp1760_readl(usb_hcd->regs + - HC_INT_PTD_SKIPMAP_REG); + skip_map = reg_read32(hcd->regs, HC_INT_PTD_SKIPMAP_REG); } } -#define max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff) -static struct isp1760_qh *qh_make(struct isp1760_hcd *priv, struct urb *urb, +static struct isp1760_qh *qh_make(struct usb_hcd *hcd, struct urb *urb, gfp_t flags) { struct isp1760_qh *qh; int is_input, type; - qh = isp1760_qh_alloc(priv, flags); + qh = isp1760_qh_alloc(flags); if (!qh) return qh; @@ -1353,29 +1311,6 @@ static struct isp1760_qh *qh_make(struct isp1760_hcd *priv, struct urb *urb, is_input = usb_pipein(urb->pipe); type = usb_pipetype(urb->pipe); - if (type == PIPE_INTERRUPT) { - - if (urb->dev->speed == USB_SPEED_HIGH) { - - qh->period = urb->interval >> 3; - if (qh->period == 0 && urb->interval != 1) { - /* NOTE interval 2 or 4 uframes could work. - * But interval 1 scheduling is simpler, and - * includes high bandwidth. - */ - printk(KERN_ERR "intr period %d uframes, NYET!", - urb->interval); - qh_destroy(qh); - return NULL; - } - } else { - qh->period = urb->interval; - } - } - - /* support for tt scheduling, and access to toggles */ - qh->dev = urb->dev; - if (!usb_pipecontrol(urb->pipe)) usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), !is_input, 1); @@ -1388,43 +1323,27 @@ static struct isp1760_qh *qh_make(struct isp1760_hcd *priv, struct urb *urb, * Returns null if it can't allocate a QH it needs to. * If the QH has TDs (urbs) already, that's great. */ -static struct isp1760_qh *qh_append_tds(struct isp1760_hcd *priv, +static struct isp1760_qh *qh_append_tds(struct usb_hcd *hcd, struct urb *urb, struct list_head *qtd_list, int epnum, void **ptr) { struct isp1760_qh *qh; - struct isp1760_qtd *qtd; - struct isp1760_qtd *prev_qtd; qh = (struct isp1760_qh *)*ptr; if (!qh) { /* can't sleep here, we have priv->lock... */ - qh = qh_make(priv, urb, GFP_ATOMIC); + qh = qh_make(hcd, urb, GFP_ATOMIC); if (!qh) return qh; *ptr = qh; } - qtd = list_entry(qtd_list->next, struct isp1760_qtd, - qtd_list); - if (!list_empty(&qh->qtd_list)) - prev_qtd = list_entry(qh->qtd_list.prev, - struct isp1760_qtd, qtd_list); - else - prev_qtd = NULL; - list_splice(qtd_list, qh->qtd_list.prev); - if (prev_qtd) { - BUG_ON(prev_qtd->hw_next); - prev_qtd->hw_next = qtd; - } - urb->hcpriv = qh; return qh; } -static void qtd_list_free(struct isp1760_hcd *priv, struct urb *urb, - struct list_head *qtd_list) +static void qtd_list_free(struct urb *urb, struct list_head *qtd_list) { struct list_head *entry, *temp; @@ -1437,9 +1356,10 @@ static void qtd_list_free(struct isp1760_hcd *priv, struct urb *urb, } } -static int isp1760_prepare_enqueue(struct isp1760_hcd *priv, struct urb *urb, +static int isp1760_prepare_enqueue(struct usb_hcd *hcd, struct urb *urb, struct list_head *qtd_list, gfp_t mem_flags, packet_enqueue *p) { + struct isp1760_hcd *priv = hcd_to_priv(hcd); struct isp1760_qtd *qtd; int epnum; unsigned long flags; @@ -1451,11 +1371,11 @@ static int isp1760_prepare_enqueue(struct isp1760_hcd *priv, struct urb *urb, epnum = urb->ep->desc.bEndpointAddress; spin_lock_irqsave(&priv->lock, flags); - if (!HCD_HW_ACCESSIBLE(priv_to_hcd(priv))) { + if (!HCD_HW_ACCESSIBLE(hcd)) { rc = -ESHUTDOWN; goto done; } - rc = usb_hcd_link_urb_to_ep(priv_to_hcd(priv), urb); + rc = usb_hcd_link_urb_to_ep(hcd, urb); if (rc) goto done; @@ -1465,25 +1385,24 @@ static int isp1760_prepare_enqueue(struct isp1760_hcd *priv, struct urb *urb, else qh_busy = 0; - qh = qh_append_tds(priv, urb, qtd_list, epnum, &urb->ep->hcpriv); + qh = qh_append_tds(hcd, urb, qtd_list, epnum, &urb->ep->hcpriv); if (!qh) { - usb_hcd_unlink_urb_from_ep(priv_to_hcd(priv), urb); + usb_hcd_unlink_urb_from_ep(hcd, urb); rc = -ENOMEM; goto done; } if (!qh_busy) - p(priv_to_hcd(priv), qh, qtd); + p(hcd, qh, qtd); done: spin_unlock_irqrestore(&priv->lock, flags); if (!qh) - qtd_list_free(priv, urb, qtd_list); + qtd_list_free(urb, qtd_list); return rc; } -static struct isp1760_qtd *isp1760_qtd_alloc(struct isp1760_hcd *priv, - gfp_t flags) +static struct isp1760_qtd *isp1760_qtd_alloc(gfp_t flags) { struct isp1760_qtd *qtd; @@ -1497,10 +1416,11 @@ static struct isp1760_qtd *isp1760_qtd_alloc(struct isp1760_hcd *priv, /* * create a list of filled qtds for this URB; won't link into qh. */ -static struct list_head *qh_urb_transaction(struct isp1760_hcd *priv, +#define max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff) +static struct list_head *qh_urb_transaction(struct usb_hcd *hcd, struct urb *urb, struct list_head *head, gfp_t flags) { - struct isp1760_qtd *qtd, *qtd_prev; + struct isp1760_qtd *qtd; void *buf; int len, maxpacket; int is_input; @@ -1509,7 +1429,7 @@ static struct list_head *qh_urb_transaction(struct isp1760_hcd *priv, /* * URBs map to sequences of QTDs: one logical transaction */ - qtd = isp1760_qtd_alloc(priv, flags); + qtd = isp1760_qtd_alloc(flags); if (!qtd) return NULL; @@ -1529,13 +1449,10 @@ static struct list_head *qh_urb_transaction(struct isp1760_hcd *priv, token | SETUP_PID); /* ... and always at least one more pid */ - token ^= DATA_TOGGLE; - qtd_prev = qtd; - qtd = isp1760_qtd_alloc(priv, flags); + qtd = isp1760_qtd_alloc(flags); if (!qtd) goto cleanup; qtd->urb = urb; - qtd_prev->hw_next = qtd; list_add_tail(&qtd->qtd_list, head); /* for zero length DATA stages, STATUS is always IN */ @@ -1565,7 +1482,7 @@ static struct list_head *qh_urb_transaction(struct isp1760_hcd *priv, if (!buf && len) { /* XXX This looks like usb storage / SCSI bug */ - printk(KERN_ERR "buf is null, dma is %08lx len is %d\n", + dev_err(hcd->self.controller, "buf is null, dma is %08lx len is %d\n", (long unsigned)urb->transfer_dma, len); WARN_ON(1); } @@ -1574,19 +1491,13 @@ static struct list_head *qh_urb_transaction(struct isp1760_hcd *priv, len -= this_qtd_len; buf += this_qtd_len; - /* qh makes control packets use qtd toggle; maybe switch it */ - if ((maxpacket & (this_qtd_len + (maxpacket - 1))) == 0) - token ^= DATA_TOGGLE; - if (len <= 0) break; - qtd_prev = qtd; - qtd = isp1760_qtd_alloc(priv, flags); + qtd = isp1760_qtd_alloc(flags); if (!qtd) goto cleanup; qtd->urb = urb; - qtd_prev->hw_next = qtd; list_add_tail(&qtd->qtd_list, head); } @@ -1601,20 +1512,16 @@ static struct list_head *qh_urb_transaction(struct isp1760_hcd *priv, one_more = 1; /* "in" <--> "out" */ token ^= IN_PID; - /* force DATA1 */ - token |= DATA_TOGGLE; } else if (usb_pipebulk(urb->pipe) && (urb->transfer_flags & URB_ZERO_PACKET) && !(urb->transfer_buffer_length % maxpacket)) { one_more = 1; } if (one_more) { - qtd_prev = qtd; - qtd = isp1760_qtd_alloc(priv, flags); + qtd = isp1760_qtd_alloc(flags); if (!qtd) goto cleanup; qtd->urb = urb; - qtd_prev->hw_next = qtd; list_add_tail(&qtd->qtd_list, head); /* never any data in such packets */ @@ -1622,18 +1529,17 @@ static struct list_head *qh_urb_transaction(struct isp1760_hcd *priv, } } - qtd->status = URB_COMPLETE_NOTIFY; + qtd->status = 0; return head; cleanup: - qtd_list_free(priv, urb, head); + qtd_list_free(urb, head); return NULL; } static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) { - struct isp1760_hcd *priv = hcd_to_priv(hcd); struct list_head qtd_list; packet_enqueue *pe; @@ -1642,29 +1548,27 @@ static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, switch (usb_pipetype(urb->pipe)) { case PIPE_CONTROL: case PIPE_BULK: - - if (!qh_urb_transaction(priv, urb, &qtd_list, mem_flags)) + if (!qh_urb_transaction(hcd, urb, &qtd_list, mem_flags)) return -ENOMEM; pe = enqueue_an_ATL_packet; break; case PIPE_INTERRUPT: - if (!qh_urb_transaction(priv, urb, &qtd_list, mem_flags)) + if (!qh_urb_transaction(hcd, urb, &qtd_list, mem_flags)) return -ENOMEM; pe = enqueue_an_INT_packet; break; case PIPE_ISOCHRONOUS: - printk(KERN_ERR "PIPE_ISOCHRONOUS ain't supported\n"); + dev_err(hcd->self.controller, "PIPE_ISOCHRONOUS ain't supported\n"); default: return -EPIPE; } - return isp1760_prepare_enqueue(priv, urb, &qtd_list, mem_flags, pe); + return isp1760_prepare_enqueue(hcd, urb, &qtd_list, mem_flags, pe); } -static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, - int status) +static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) { struct isp1760_hcd *priv = hcd_to_priv(hcd); struct inter_packet_info *ints; @@ -1681,7 +1585,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, case PIPE_INTERRUPT: ints = priv->int_ints; - reg_base = INT_REGS_OFFSET; + reg_base = INT_PTD_OFFSET; or_reg = HC_INT_IRQ_MASK_OR_REG; skip_reg = HC_INT_PTD_SKIPMAP_REG; pe = enqueue_an_INT_packet; @@ -1689,7 +1593,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, default: ints = priv->atl_ints; - reg_base = ATL_REGS_OFFSET; + reg_base = ATL_PTD_OFFSET; or_reg = HC_ATL_IRQ_MASK_OR_REG; skip_reg = HC_ATL_PTD_SKIPMAP_REG; pe = enqueue_an_ATL_packet; @@ -1700,81 +1604,84 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, spin_lock_irqsave(&priv->lock, flags); for (i = 0; i < 32; i++) { - if (ints->urb == urb) { + if (!ints[i].qh) + continue; + BUG_ON(!ints[i].qtd); + + if (ints[i].qtd->urb == urb) { u32 skip_map; u32 or_map; struct isp1760_qtd *qtd; - struct isp1760_qh *qh = ints->qh; + struct isp1760_qh *qh; - skip_map = isp1760_readl(hcd->regs + skip_reg); + skip_map = reg_read32(hcd->regs, skip_reg); skip_map |= 1 << i; - isp1760_writel(skip_map, hcd->regs + skip_reg); + reg_write32(hcd->regs, skip_reg, skip_map); - or_map = isp1760_readl(hcd->regs + or_reg); + or_map = reg_read32(hcd->regs, or_reg); or_map &= ~(1 << i); - isp1760_writel(or_map, hcd->regs + or_reg); + reg_write32(hcd->regs, or_reg, or_map); + + ptd_write(hcd->regs, reg_base, i, &ptd); - priv_write_copy(priv, (u32 *)&ptd, hcd->regs + reg_base - + i * sizeof(ptd), sizeof(ptd)); - qtd = ints->qtd; - qtd = clean_up_qtdlist(qtd); + qtd = ints[i].qtd; + qh = ints[i].qh; - free_mem(priv, ints->payload); + free_mem(hcd, qtd); + qtd = clean_up_qtdlist(qtd, qh); - ints->urb = NULL; - ints->qh = NULL; - ints->qtd = NULL; - ints->data_buffer = NULL; - ints->payload = 0; + ints[i].qh = NULL; + ints[i].qtd = NULL; - isp1760_urb_done(priv, urb, status); + isp1760_urb_done(hcd, urb); if (qtd) pe(hcd, qh, qtd); break; - } else if (ints->qtd) { - struct isp1760_qtd *qtd, *prev_qtd = ints->qtd; + } else { + struct isp1760_qtd *qtd; - for (qtd = ints->qtd->hw_next; qtd; qtd = qtd->hw_next) { + list_for_each_entry(qtd, &ints[i].qtd->qtd_list, + qtd_list) { if (qtd->urb == urb) { - prev_qtd->hw_next = clean_up_qtdlist(qtd); - isp1760_urb_done(priv, urb, status); + clean_up_qtdlist(qtd, ints[i].qh); + isp1760_urb_done(hcd, urb); + qtd = NULL; break; } - prev_qtd = qtd; } - /* we found the urb before the end of the list */ - if (qtd) + + /* We found the urb before the last slot */ + if (!qtd) break; } - ints++; } spin_unlock_irqrestore(&priv->lock, flags); return 0; } -static irqreturn_t isp1760_irq(struct usb_hcd *usb_hcd) +static irqreturn_t isp1760_irq(struct usb_hcd *hcd) { - struct isp1760_hcd *priv = hcd_to_priv(usb_hcd); + struct isp1760_hcd *priv = hcd_to_priv(hcd); u32 imask; irqreturn_t irqret = IRQ_NONE; spin_lock(&priv->lock); - if (!(usb_hcd->state & HC_STATE_RUNNING)) + if (!(hcd->state & HC_STATE_RUNNING)) goto leave; - imask = isp1760_readl(usb_hcd->regs + HC_INTERRUPT_REG); + imask = reg_read32(hcd->regs, HC_INTERRUPT_REG); if (unlikely(!imask)) goto leave; - isp1760_writel(imask, usb_hcd->regs + HC_INTERRUPT_REG); - if (imask & HC_ATL_INT) - do_atl_int(usb_hcd); + reg_write32(hcd->regs, HC_INTERRUPT_REG, imask); + if (imask & (HC_ATL_INT | HC_SOT_INT)) + do_atl_int(hcd); if (imask & HC_INTL_INT) - do_intl_int(usb_hcd); + do_intl_int(hcd); irqret = IRQ_HANDLED; leave: @@ -1799,12 +1706,12 @@ static int isp1760_hub_status_data(struct usb_hcd *hcd, char *buf) mask = PORT_CSC; spin_lock_irqsave(&priv->lock, flags); - temp = isp1760_readl(hcd->regs + HC_PORTSC1); + temp = reg_read32(hcd->regs, HC_PORTSC1); if (temp & PORT_OWNER) { if (temp & PORT_CSC) { temp &= ~PORT_CSC; - isp1760_writel(temp, hcd->regs + HC_PORTSC1); + reg_write32(hcd->regs, HC_PORTSC1, temp); goto done; } } @@ -1844,9 +1751,9 @@ static void isp1760_hub_descriptor(struct isp1760_hcd *priv, temp = 1 + (ports / 8); desc->bDescLength = 7 + 2 * temp; - /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */ - memset(&desc->bitmap[0], 0, temp); - memset(&desc->bitmap[temp], 0xff, temp); + /* ports removable, and usb 1.0 legacy PortPwrCtrlMask */ + memset(&desc->u.hs.DeviceRemovable[0], 0, temp); + memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp); /* per-port overcurrent reporting */ temp = 0x0008; @@ -1861,8 +1768,8 @@ static void isp1760_hub_descriptor(struct isp1760_hcd *priv, #define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E) -static int check_reset_complete(struct isp1760_hcd *priv, int index, - u32 __iomem *status_reg, int port_status) +static int check_reset_complete(struct usb_hcd *hcd, int index, + int port_status) { if (!(port_status & PORT_CONNECT)) return port_status; @@ -1870,15 +1777,17 @@ static int check_reset_complete(struct isp1760_hcd *priv, int index, /* if reset finished and it's still not enabled -- handoff */ if (!(port_status & PORT_PE)) { - printk(KERN_ERR "port %d full speed --> companion\n", - index + 1); + dev_err(hcd->self.controller, + "port %d full speed --> companion\n", + index + 1); port_status |= PORT_OWNER; port_status &= ~PORT_RWC_BITS; - isp1760_writel(port_status, status_reg); + reg_write32(hcd->regs, HC_PORTSC1, port_status); } else - printk(KERN_ERR "port %d high speed\n", index + 1); + dev_err(hcd->self.controller, "port %d high speed\n", + index + 1); return port_status; } @@ -1888,7 +1797,6 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, { struct isp1760_hcd *priv = hcd_to_priv(hcd); int ports = HCS_N_PORTS(priv->hcs_params); - u32 __iomem *status_reg = hcd->regs + HC_PORTSC1; u32 temp, status; unsigned long flags; int retval = 0; @@ -1917,7 +1825,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, if (!wIndex || wIndex > ports) goto error; wIndex--; - temp = isp1760_readl(status_reg); + temp = reg_read32(hcd->regs, HC_PORTSC1); /* * Even if OWNER is set, so the port is owned by the @@ -1928,7 +1836,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, switch (wValue) { case USB_PORT_FEAT_ENABLE: - isp1760_writel(temp & ~PORT_PE, status_reg); + reg_write32(hcd->regs, HC_PORTSC1, temp & ~PORT_PE); break; case USB_PORT_FEAT_C_ENABLE: /* XXX error? */ @@ -1942,8 +1850,8 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, goto error; /* resume signaling for 20 msec */ temp &= ~(PORT_RWC_BITS); - isp1760_writel(temp | PORT_RESUME, - status_reg); + reg_write32(hcd->regs, HC_PORTSC1, + temp | PORT_RESUME); priv->reset_done = jiffies + msecs_to_jiffies(20); } @@ -1953,11 +1861,11 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, break; case USB_PORT_FEAT_POWER: if (HCS_PPC(priv->hcs_params)) - isp1760_writel(temp & ~PORT_POWER, status_reg); + reg_write32(hcd->regs, HC_PORTSC1, + temp & ~PORT_POWER); break; case USB_PORT_FEAT_C_CONNECTION: - isp1760_writel(temp | PORT_CSC, - status_reg); + reg_write32(hcd->regs, HC_PORTSC1, temp | PORT_CSC); break; case USB_PORT_FEAT_C_OVER_CURRENT: /* XXX error ?*/ @@ -1968,7 +1876,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, default: goto error; } - isp1760_readl(hcd->regs + HC_USBCMD); + reg_read32(hcd->regs, HC_USBCMD); break; case GetHubDescriptor: isp1760_hub_descriptor(priv, (struct usb_hub_descriptor *) @@ -1983,7 +1891,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, goto error; wIndex--; status = 0; - temp = isp1760_readl(status_reg); + temp = reg_read32(hcd->regs, HC_PORTSC1); /* wPortChange bits */ if (temp & PORT_CSC) @@ -1992,7 +1900,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, /* whoever resumes must GetPortStatus to complete it!! */ if (temp & PORT_RESUME) { - printk(KERN_ERR "Port resume should be skipped.\n"); + dev_err(hcd->self.controller, "Port resume should be skipped.\n"); /* Remote Wakeup received? */ if (!priv->reset_done) { @@ -2000,8 +1908,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, priv->reset_done = jiffies + msecs_to_jiffies(20); /* check the port again */ - mod_timer(&priv_to_hcd(priv)->rh_timer, - priv->reset_done); + mod_timer(&hcd->rh_timer, priv->reset_done); } /* resume completed? */ @@ -2011,14 +1918,13 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, priv->reset_done = 0; /* stop resume signaling */ - temp = isp1760_readl(status_reg); - isp1760_writel( - temp & ~(PORT_RWC_BITS | PORT_RESUME), - status_reg); - retval = handshake(priv, status_reg, + temp = reg_read32(hcd->regs, HC_PORTSC1); + reg_write32(hcd->regs, HC_PORTSC1, + temp & ~(PORT_RWC_BITS | PORT_RESUME)); + retval = handshake(hcd, HC_PORTSC1, PORT_RESUME, 0, 2000 /* 2msec */); if (retval != 0) { - isp1760_err(priv, + dev_err(hcd->self.controller, "port %d resume error %d\n", wIndex + 1, retval); goto error; @@ -2035,22 +1941,21 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, priv->reset_done = 0; /* force reset to complete */ - isp1760_writel(temp & ~PORT_RESET, - status_reg); + reg_write32(hcd->regs, HC_PORTSC1, temp & ~PORT_RESET); /* REVISIT: some hardware needs 550+ usec to clear * this bit; seems too long to spin routinely... */ - retval = handshake(priv, status_reg, + retval = handshake(hcd, HC_PORTSC1, PORT_RESET, 0, 750); if (retval != 0) { - isp1760_err(priv, "port %d reset error %d\n", + dev_err(hcd->self.controller, "port %d reset error %d\n", wIndex + 1, retval); goto error; } /* see what we found out */ - temp = check_reset_complete(priv, wIndex, status_reg, - isp1760_readl(status_reg)); + temp = check_reset_complete(hcd, wIndex, + reg_read32(hcd->regs, HC_PORTSC1)); } /* * Even if OWNER is set, there's no harm letting khubd @@ -2059,12 +1964,12 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, */ if (temp & PORT_OWNER) - printk(KERN_ERR "Warning: PORT_OWNER is set\n"); + dev_err(hcd->self.controller, "PORT_OWNER is set\n"); if (temp & PORT_CONNECT) { status |= USB_PORT_STAT_CONNECTION; /* status may be from integrated TT */ - status |= ehci_port_speed(priv, temp); + status |= USB_PORT_STAT_HIGH_SPEED; } if (temp & PORT_PE) status |= USB_PORT_STAT_ENABLE; @@ -2093,14 +1998,14 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, if (!wIndex || wIndex > ports) goto error; wIndex--; - temp = isp1760_readl(status_reg); + temp = reg_read32(hcd->regs, HC_PORTSC1); if (temp & PORT_OWNER) break; /* temp &= ~PORT_RWC_BITS; */ switch (wValue) { case USB_PORT_FEAT_ENABLE: - isp1760_writel(temp | PORT_PE, status_reg); + reg_write32(hcd->regs, HC_PORTSC1, temp | PORT_PE); break; case USB_PORT_FEAT_SUSPEND: @@ -2108,12 +2013,12 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, || (temp & PORT_RESET) != 0) goto error; - isp1760_writel(temp | PORT_SUSPEND, status_reg); + reg_write32(hcd->regs, HC_PORTSC1, temp | PORT_SUSPEND); break; case USB_PORT_FEAT_POWER: if (HCS_PPC(priv->hcs_params)) - isp1760_writel(temp | PORT_POWER, - status_reg); + reg_write32(hcd->regs, HC_PORTSC1, + temp | PORT_POWER); break; case USB_PORT_FEAT_RESET: if (temp & PORT_RESUME) @@ -2136,12 +2041,12 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq, priv->reset_done = jiffies + msecs_to_jiffies(50); } - isp1760_writel(temp, status_reg); + reg_write32(hcd->regs, HC_PORTSC1, temp); break; default: goto error; } - isp1760_readl(hcd->regs + HC_USBCMD); + reg_read32(hcd->regs, HC_USBCMD); break; default: @@ -2153,10 +2058,10 @@ error: return retval; } -static void isp1760_endpoint_disable(struct usb_hcd *usb_hcd, +static void isp1760_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep) { - struct isp1760_hcd *priv = hcd_to_priv(usb_hcd); + struct isp1760_hcd *priv = hcd_to_priv(hcd); struct isp1760_qh *qh; struct isp1760_qtd *qtd; unsigned long flags; @@ -2176,16 +2081,16 @@ static void isp1760_endpoint_disable(struct usb_hcd *usb_hcd, qtd_list); if (qtd->status & URB_ENQUEUED) { - spin_unlock_irqrestore(&priv->lock, flags); - isp1760_urb_dequeue(usb_hcd, qtd->urb, -ECONNRESET); + isp1760_urb_dequeue(hcd, qtd->urb, -ECONNRESET); spin_lock_irqsave(&priv->lock, flags); } else { struct urb *urb; urb = qtd->urb; - clean_up_qtdlist(qtd); - isp1760_urb_done(priv, urb, -ECONNRESET); + clean_up_qtdlist(qtd, qh); + urb->status = -ECONNRESET; + isp1760_urb_done(hcd, urb); } } while (1); @@ -2203,7 +2108,7 @@ static int isp1760_get_frame(struct usb_hcd *hcd) struct isp1760_hcd *priv = hcd_to_priv(hcd); u32 fr; - fr = isp1760_readl(hcd->regs + HC_FRINDEX); + fr = reg_read32(hcd->regs, HC_FRINDEX); return (fr >> 3) % priv->periodic_size; } @@ -2217,13 +2122,13 @@ static void isp1760_stop(struct usb_hcd *hcd) mdelay(20); spin_lock_irq(&priv->lock); - ehci_reset(priv); + ehci_reset(hcd); /* Disable IRQ */ - temp = isp1760_readl(hcd->regs + HC_HW_MODE_CTRL); - isp1760_writel(temp &= ~HW_GLOBAL_INTR_EN, hcd->regs + HC_HW_MODE_CTRL); + temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL); + reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp &= ~HW_GLOBAL_INTR_EN); spin_unlock_irq(&priv->lock); - isp1760_writel(0, hcd->regs + HC_CONFIGFLAG); + reg_write32(hcd->regs, HC_CONFIGFLAG, 0); } static void isp1760_shutdown(struct usb_hcd *hcd) @@ -2231,12 +2136,12 @@ static void isp1760_shutdown(struct usb_hcd *hcd) u32 command, temp; isp1760_stop(hcd); - temp = isp1760_readl(hcd->regs + HC_HW_MODE_CTRL); - isp1760_writel(temp &= ~HW_GLOBAL_INTR_EN, hcd->regs + HC_HW_MODE_CTRL); + temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL); + reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp &= ~HW_GLOBAL_INTR_EN); - command = isp1760_readl(hcd->regs + HC_USBCMD); + command = reg_read32(hcd->regs, HC_USBCMD); command &= ~CMD_RUN; - isp1760_writel(command, hcd->regs + HC_USBCMD); + reg_write32(hcd->regs, HC_USBCMD, command); } static const struct hc_driver isp1760_hc_driver = { diff --git a/drivers/usb/host/isp1760-hcd.h b/drivers/usb/host/isp1760-hcd.h index 6931ef5c9650..870507690607 100644 --- a/drivers/usb/host/isp1760-hcd.h +++ b/drivers/usb/host/isp1760-hcd.h @@ -69,6 +69,7 @@ void deinit_kmem_cache(void); #define HC_INTERRUPT_ENABLE 0x314 #define INTERRUPT_ENABLE_MASK (HC_INTL_INT | HC_ATL_INT | HC_EOT_INT) +#define INTERRUPT_ENABLE_SOT_MASK (HC_INTL_INT | HC_SOT_INT | HC_EOT_INT) #define HC_ISO_INT (1 << 9) #define HC_ATL_INT (1 << 8) @@ -83,37 +84,29 @@ void deinit_kmem_cache(void); #define HC_INT_IRQ_MASK_AND_REG 0x328 #define HC_ATL_IRQ_MASK_AND_REG 0x32C -/* Register sets */ -#define HC_BEGIN_OF_ATL 0x0c00 -#define HC_BEGIN_OF_INT 0x0800 -#define HC_BEGIN_OF_ISO 0x0400 -#define HC_BEGIN_OF_PAYLOAD 0x1000 - /* urb state*/ #define DELETE_URB (0x0008) #define NO_TRANSFER_ACTIVE (0xffffffff) -#define ATL_REGS_OFFSET (0xc00) -#define INT_REGS_OFFSET (0x800) - -/* Philips Transfer Descriptor (PTD) */ +/* Philips Proprietary Transfer Descriptor (PTD) */ +typedef __u32 __bitwise __dw; struct ptd { - __le32 dw0; - __le32 dw1; - __le32 dw2; - __le32 dw3; - __le32 dw4; - __le32 dw5; - __le32 dw6; - __le32 dw7; + __dw dw0; + __dw dw1; + __dw dw2; + __dw dw3; + __dw dw4; + __dw dw5; + __dw dw6; + __dw dw7; }; +#define PTD_OFFSET 0x0400 +#define ISO_PTD_OFFSET 0x0400 +#define INT_PTD_OFFSET 0x0800 +#define ATL_PTD_OFFSET 0x0c00 +#define PAYLOAD_OFFSET 0x1000 struct inter_packet_info { - void *data_buffer; - u32 payload; -#define PTD_FIRE_NEXT (1 << 0) -#define PTD_URB_FINISHED (1 << 1) - struct urb *urb; struct isp1760_qh *qh; struct isp1760_qtd *qtd; }; @@ -122,15 +115,6 @@ struct inter_packet_info { typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh, struct isp1760_qtd *qtd); -#define isp1760_dbg(priv, fmt, args...) \ - dev_dbg(priv_to_hcd(priv)->self.controller, fmt, ##args) - -#define isp1760_info(priv, fmt, args...) \ - dev_info(priv_to_hcd(priv)->self.controller, fmt, ##args) - -#define isp1760_err(priv, fmt, args...) \ - dev_err(priv_to_hcd(priv)->self.controller, fmt, ##args) - /* * Device flags that can vary from board to board. All of these * indicate the most "atypical" case, so that a devflags of 0 is @@ -167,10 +151,8 @@ struct memory_chunk { #define BLOCK_2_SIZE 1024 #define BLOCK_3_SIZE 8192 #define BLOCKS (BLOCK_1_NUM + BLOCK_2_NUM + BLOCK_3_NUM) -#define PAYLOAD_SIZE 0xf000 - -/* I saw if some reloads if the pointer was negative */ -#define ISP1760_NULL_POINTER (0x400) +#define MAX_PAYLOAD_SIZE BLOCK_3_SIZE +#define PAYLOAD_AREA_SIZE 0xf000 /* ATL */ /* DW0 */ @@ -224,6 +206,4 @@ struct memory_chunk { #define NAK_COUNTER (0) #define ERR_COUNTER (2) -#define HC_ATL_PL_SIZE (8192) - #endif diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 759a12ff8048..fb035751e4b2 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -75,6 +75,7 @@ static const char hcd_name [] = "ohci_hcd"; #define STATECHANGE_DELAY msecs_to_jiffies(300) #include "ohci.h" +#include "pci-quirks.h" static void ohci_dump (struct ohci_hcd *ohci, int verbose); static int ohci_init (struct ohci_hcd *ohci); @@ -85,18 +86,8 @@ static int ohci_restart (struct ohci_hcd *ohci); #endif #ifdef CONFIG_PCI -static void quirk_amd_pll(int state); -static void amd_iso_dev_put(void); static void sb800_prefetch(struct ohci_hcd *ohci, int on); #else -static inline void quirk_amd_pll(int state) -{ - return; -} -static inline void amd_iso_dev_put(void) -{ - return; -} static inline void sb800_prefetch(struct ohci_hcd *ohci, int on) { return; @@ -912,7 +903,7 @@ static void ohci_stop (struct usb_hcd *hcd) if (quirk_zfmicro(ohci)) del_timer(&ohci->unlink_watchdog); if (quirk_amdiso(ohci)) - amd_iso_dev_put(); + usb_amd_dev_put(); remove_debug_files (ohci); ohci_mem_cleanup (ohci); @@ -1068,10 +1059,7 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ohci_hcd_da8xx_driver #endif -#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_CPU_SUBTYPE_SH7763) || \ - defined(CONFIG_CPU_SUBTYPE_SH7786) +#ifdef CONFIG_USB_OHCI_SH #include "ohci-sh.c" #define PLATFORM_DRIVER ohci_hcd_sh_driver #endif diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index cddcda95b579..9154615292db 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -580,15 +580,16 @@ ohci_hub_descriptor ( temp |= 0x0008; desc->wHubCharacteristics = (__force __u16)cpu_to_hc16(ohci, temp); - /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */ + /* ports removable, and usb 1.0 legacy PortPwrCtrlMask */ rh = roothub_b (ohci); - memset(desc->bitmap, 0xff, sizeof(desc->bitmap)); - desc->bitmap [0] = rh & RH_B_DR; + memset(desc->u.hs.DeviceRemovable, 0xff, + sizeof(desc->u.hs.DeviceRemovable)); + desc->u.hs.DeviceRemovable[0] = rh & RH_B_DR; if (ohci->num_ports > 7) { - desc->bitmap [1] = (rh & RH_B_DR) >> 8; - desc->bitmap [2] = 0xff; + desc->u.hs.DeviceRemovable[1] = (rh & RH_B_DR) >> 8; + desc->u.hs.DeviceRemovable[2] = 0xff; } else - desc->bitmap [1] = 0xff; + desc->u.hs.DeviceRemovable[1] = 0xff; } /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c index a37d5993e4e3..6048f2f64f73 100644 --- a/drivers/usb/host/ohci-omap3.c +++ b/drivers/usb/host/ohci-omap3.c @@ -7,6 +7,7 @@ * Copyright (C) 2007-2010 Texas Instruments, Inc. * Author: Vikram Pandita <vikram.pandita@ti.com> * Author: Anand Gadiyar <gadiyar@ti.com> + * Author: Keshava Munegowda <keshava_mgowda@ti.com> * * Based on ehci-omap.c and some other ohci glue layers * @@ -24,150 +25,15 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * - * TODO (last updated Mar 10th, 2010): + * TODO (last updated Feb 27, 2011): * - add kernel-doc - * - Factor out code common to EHCI to a separate file - * - Make EHCI and OHCI coexist together - * - needs newer silicon versions to actually work - * - the last one to be loaded currently steps on the other's toes - * - Add hooks for configuring transceivers, etc. at init/exit - * - Add aggressive clock-management code */ #include <linux/platform_device.h> -#include <linux/clk.h> - #include <plat/usb.h> -/* - * OMAP USBHOST Register addresses: VIRTUAL ADDRESSES - * Use ohci_omap_readl()/ohci_omap_writel() functions - */ - -/* TLL Register Set */ -#define OMAP_USBTLL_REVISION (0x00) -#define OMAP_USBTLL_SYSCONFIG (0x10) -#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8) -#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3) -#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2) -#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1) -#define OMAP_USBTLL_SYSCONFIG_AUTOIDLE (1 << 0) - -#define OMAP_USBTLL_SYSSTATUS (0x14) -#define OMAP_USBTLL_SYSSTATUS_RESETDONE (1 << 0) - -#define OMAP_USBTLL_IRQSTATUS (0x18) -#define OMAP_USBTLL_IRQENABLE (0x1C) - -#define OMAP_TLL_SHARED_CONF (0x30) -#define OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN (1 << 6) -#define OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN (1 << 5) -#define OMAP_TLL_SHARED_CONF_USB_DIVRATION (1 << 2) -#define OMAP_TLL_SHARED_CONF_FCLK_REQ (1 << 1) -#define OMAP_TLL_SHARED_CONF_FCLK_IS_ON (1 << 0) - -#define OMAP_TLL_CHANNEL_CONF(num) (0x040 + 0x004 * num) -#define OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT 24 -#define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11) -#define OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE (1 << 10) -#define OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE (1 << 9) -#define OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE (1 << 8) -#define OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS (1 << 1) -#define OMAP_TLL_CHANNEL_CONF_CHANEN (1 << 0) - -#define OMAP_TLL_CHANNEL_COUNT 3 - -/* UHH Register Set */ -#define OMAP_UHH_REVISION (0x00) -#define OMAP_UHH_SYSCONFIG (0x10) -#define OMAP_UHH_SYSCONFIG_MIDLEMODE (1 << 12) -#define OMAP_UHH_SYSCONFIG_CACTIVITY (1 << 8) -#define OMAP_UHH_SYSCONFIG_SIDLEMODE (1 << 3) -#define OMAP_UHH_SYSCONFIG_ENAWAKEUP (1 << 2) -#define OMAP_UHH_SYSCONFIG_SOFTRESET (1 << 1) -#define OMAP_UHH_SYSCONFIG_AUTOIDLE (1 << 0) - -#define OMAP_UHH_SYSSTATUS (0x14) -#define OMAP_UHH_SYSSTATUS_UHHRESETDONE (1 << 0) -#define OMAP_UHH_SYSSTATUS_OHCIRESETDONE (1 << 1) -#define OMAP_UHH_SYSSTATUS_EHCIRESETDONE (1 << 2) -#define OMAP_UHH_HOSTCONFIG (0x40) -#define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS (1 << 0) -#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS (1 << 0) -#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11) -#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12) -#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2) -#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3) -#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4) -#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN (1 << 5) -#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS (1 << 8) -#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS (1 << 9) -#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS (1 << 10) - -#define OMAP_UHH_DEBUG_CSR (0x44) - /*-------------------------------------------------------------------------*/ -static inline void ohci_omap_writel(void __iomem *base, u32 reg, u32 val) -{ - __raw_writel(val, base + reg); -} - -static inline u32 ohci_omap_readl(void __iomem *base, u32 reg) -{ - return __raw_readl(base + reg); -} - -static inline void ohci_omap_writeb(void __iomem *base, u8 reg, u8 val) -{ - __raw_writeb(val, base + reg); -} - -static inline u8 ohci_omap_readb(void __iomem *base, u8 reg) -{ - return __raw_readb(base + reg); -} - -/*-------------------------------------------------------------------------*/ - -struct ohci_hcd_omap3 { - struct ohci_hcd *ohci; - struct device *dev; - - struct clk *usbhost_ick; - struct clk *usbhost2_120m_fck; - struct clk *usbhost1_48m_fck; - struct clk *usbtll_fck; - struct clk *usbtll_ick; - - /* port_mode: TLL/PHY, 2/3/4/6-PIN, DP-DM/DAT-SE0 */ - enum ohci_omap3_port_mode port_mode[OMAP3_HS_USB_PORTS]; - void __iomem *uhh_base; - void __iomem *tll_base; - void __iomem *ohci_base; - - unsigned es2_compatibility:1; -}; - -/*-------------------------------------------------------------------------*/ - -static void ohci_omap3_clock_power(struct ohci_hcd_omap3 *omap, int on) -{ - if (on) { - clk_enable(omap->usbtll_ick); - clk_enable(omap->usbtll_fck); - clk_enable(omap->usbhost_ick); - clk_enable(omap->usbhost1_48m_fck); - clk_enable(omap->usbhost2_120m_fck); - } else { - clk_disable(omap->usbhost2_120m_fck); - clk_disable(omap->usbhost1_48m_fck); - clk_disable(omap->usbhost_ick); - clk_disable(omap->usbtll_fck); - clk_disable(omap->usbtll_ick); - } -} - static int ohci_omap3_init(struct usb_hcd *hcd) { dev_dbg(hcd->self.controller, "starting OHCI controller\n"); @@ -175,7 +41,6 @@ static int ohci_omap3_init(struct usb_hcd *hcd) return ohci_init(hcd_to_ohci(hcd)); } - /*-------------------------------------------------------------------------*/ static int ohci_omap3_start(struct usb_hcd *hcd) @@ -202,325 +67,6 @@ static int ohci_omap3_start(struct usb_hcd *hcd) /*-------------------------------------------------------------------------*/ -/* - * convert the port-mode enum to a value we can use in the FSLSMODE - * field of USBTLL_CHANNEL_CONF - */ -static unsigned ohci_omap3_fslsmode(enum ohci_omap3_port_mode mode) -{ - switch (mode) { - case OMAP_OHCI_PORT_MODE_UNUSED: - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0: - return 0x0; - - case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM: - return 0x1; - - case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0: - return 0x2; - - case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM: - return 0x3; - - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0: - return 0x4; - - case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM: - return 0x5; - - case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0: - return 0x6; - - case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM: - return 0x7; - - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0: - return 0xA; - - case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM: - return 0xB; - default: - pr_warning("Invalid port mode, using default\n"); - return 0x0; - } -} - -static void ohci_omap3_tll_config(struct ohci_hcd_omap3 *omap) -{ - u32 reg; - int i; - - /* Program TLL SHARED CONF */ - reg = ohci_omap_readl(omap->tll_base, OMAP_TLL_SHARED_CONF); - reg &= ~OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN; - reg &= ~OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN; - reg |= OMAP_TLL_SHARED_CONF_USB_DIVRATION; - reg |= OMAP_TLL_SHARED_CONF_FCLK_IS_ON; - ohci_omap_writel(omap->tll_base, OMAP_TLL_SHARED_CONF, reg); - - /* Program each TLL channel */ - /* - * REVISIT: Only the 3-pin and 4-pin PHY modes have - * actually been tested. - */ - for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) { - - /* Enable only those channels that are actually used */ - if (omap->port_mode[i] == OMAP_OHCI_PORT_MODE_UNUSED) - continue; - - reg = ohci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i)); - reg |= ohci_omap3_fslsmode(omap->port_mode[i]) - << OMAP_TLL_CHANNEL_CONF_FSLSMODE_SHIFT; - reg |= OMAP_TLL_CHANNEL_CONF_CHANMODE_FSLS; - reg |= OMAP_TLL_CHANNEL_CONF_CHANEN; - ohci_omap_writel(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i), reg); - } -} - -/* omap3_start_ohci - * - Start the TI USBHOST controller - */ -static int omap3_start_ohci(struct ohci_hcd_omap3 *omap, struct usb_hcd *hcd) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(1000); - u32 reg = 0; - int ret = 0; - - dev_dbg(omap->dev, "starting TI OHCI USB Controller\n"); - - /* Get all the clock handles we need */ - omap->usbhost_ick = clk_get(omap->dev, "usbhost_ick"); - if (IS_ERR(omap->usbhost_ick)) { - dev_err(omap->dev, "could not get usbhost_ick\n"); - ret = PTR_ERR(omap->usbhost_ick); - goto err_host_ick; - } - - omap->usbhost2_120m_fck = clk_get(omap->dev, "usbhost_120m_fck"); - if (IS_ERR(omap->usbhost2_120m_fck)) { - dev_err(omap->dev, "could not get usbhost_120m_fck\n"); - ret = PTR_ERR(omap->usbhost2_120m_fck); - goto err_host_120m_fck; - } - - omap->usbhost1_48m_fck = clk_get(omap->dev, "usbhost_48m_fck"); - if (IS_ERR(omap->usbhost1_48m_fck)) { - dev_err(omap->dev, "could not get usbhost_48m_fck\n"); - ret = PTR_ERR(omap->usbhost1_48m_fck); - goto err_host_48m_fck; - } - - omap->usbtll_fck = clk_get(omap->dev, "usbtll_fck"); - if (IS_ERR(omap->usbtll_fck)) { - dev_err(omap->dev, "could not get usbtll_fck\n"); - ret = PTR_ERR(omap->usbtll_fck); - goto err_tll_fck; - } - - omap->usbtll_ick = clk_get(omap->dev, "usbtll_ick"); - if (IS_ERR(omap->usbtll_ick)) { - dev_err(omap->dev, "could not get usbtll_ick\n"); - ret = PTR_ERR(omap->usbtll_ick); - goto err_tll_ick; - } - - /* Now enable all the clocks in the correct order */ - ohci_omap3_clock_power(omap, 1); - - /* perform TLL soft reset, and wait until reset is complete */ - ohci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, - OMAP_USBTLL_SYSCONFIG_SOFTRESET); - - /* Wait for TLL reset to complete */ - while (!(ohci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS) - & OMAP_USBTLL_SYSSTATUS_RESETDONE)) { - cpu_relax(); - - if (time_after(jiffies, timeout)) { - dev_dbg(omap->dev, "operation timed out\n"); - ret = -EINVAL; - goto err_sys_status; - } - } - - dev_dbg(omap->dev, "TLL reset done\n"); - - /* (1<<3) = no idle mode only for initial debugging */ - ohci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, - OMAP_USBTLL_SYSCONFIG_ENAWAKEUP | - OMAP_USBTLL_SYSCONFIG_SIDLEMODE | - OMAP_USBTLL_SYSCONFIG_CACTIVITY); - - - /* Put UHH in NoIdle/NoStandby mode */ - reg = ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSCONFIG); - reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP - | OMAP_UHH_SYSCONFIG_SIDLEMODE - | OMAP_UHH_SYSCONFIG_CACTIVITY - | OMAP_UHH_SYSCONFIG_MIDLEMODE); - reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE; - reg &= ~OMAP_UHH_SYSCONFIG_SOFTRESET; - - ohci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg); - - reg = ohci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG); - - /* setup ULPI bypass and burst configurations */ - reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN - | OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN - | OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN); - reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN; - - /* - * REVISIT: Pi_CONNECT_STATUS controls MStandby - * assertion and Swakeup generation - let us not - * worry about this for now. OMAP HWMOD framework - * might take care of this later. If not, we can - * update these registers when adding aggressive - * clock management code. - * - * For now, turn off all the Pi_CONNECT_STATUS bits - * - if (omap->port_mode[0] == OMAP_OHCI_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS; - if (omap->port_mode[1] == OMAP_OHCI_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS; - if (omap->port_mode[2] == OMAP_OHCI_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS; - */ - reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS; - reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS; - reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS; - - if (omap->es2_compatibility) { - /* - * All OHCI modes need to go through the TLL, - * unlike in the EHCI case. So use UTMI mode - * for all ports for OHCI, on ES2.x silicon - */ - dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1\n"); - reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS; - } else { - dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n"); - if (omap->port_mode[0] == OMAP_OHCI_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; - else - reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS; - - if (omap->port_mode[1] == OMAP_OHCI_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; - else - reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS; - - if (omap->port_mode[2] == OMAP_OHCI_PORT_MODE_UNUSED) - reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; - else - reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS; - - } - ohci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg); - dev_dbg(omap->dev, "UHH setup done, uhh_hostconfig=%x\n", reg); - - ohci_omap3_tll_config(omap); - - return 0; - -err_sys_status: - ohci_omap3_clock_power(omap, 0); - clk_put(omap->usbtll_ick); - -err_tll_ick: - clk_put(omap->usbtll_fck); - -err_tll_fck: - clk_put(omap->usbhost1_48m_fck); - -err_host_48m_fck: - clk_put(omap->usbhost2_120m_fck); - -err_host_120m_fck: - clk_put(omap->usbhost_ick); - -err_host_ick: - return ret; -} - -static void omap3_stop_ohci(struct ohci_hcd_omap3 *omap, struct usb_hcd *hcd) -{ - unsigned long timeout = jiffies + msecs_to_jiffies(100); - - dev_dbg(omap->dev, "stopping TI EHCI USB Controller\n"); - - /* Reset USBHOST for insmod/rmmod to work */ - ohci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, - OMAP_UHH_SYSCONFIG_SOFTRESET); - while (!(ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) - & OMAP_UHH_SYSSTATUS_UHHRESETDONE)) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - while (!(ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) - & OMAP_UHH_SYSSTATUS_OHCIRESETDONE)) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - while (!(ohci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS) - & OMAP_UHH_SYSSTATUS_EHCIRESETDONE)) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - ohci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1)); - - while (!(ohci_omap_readl(omap->tll_base, OMAP_USBTLL_SYSSTATUS) - & (1 << 0))) { - cpu_relax(); - - if (time_after(jiffies, timeout)) - dev_dbg(omap->dev, "operation timed out\n"); - } - - ohci_omap3_clock_power(omap, 0); - - if (omap->usbtll_fck != NULL) { - clk_put(omap->usbtll_fck); - omap->usbtll_fck = NULL; - } - - if (omap->usbhost_ick != NULL) { - clk_put(omap->usbhost_ick); - omap->usbhost_ick = NULL; - } - - if (omap->usbhost1_48m_fck != NULL) { - clk_put(omap->usbhost1_48m_fck); - omap->usbhost1_48m_fck = NULL; - } - - if (omap->usbhost2_120m_fck != NULL) { - clk_put(omap->usbhost2_120m_fck); - omap->usbhost2_120m_fck = NULL; - } - - if (omap->usbtll_ick != NULL) { - clk_put(omap->usbtll_ick); - omap->usbtll_ick = NULL; - } - - dev_dbg(omap->dev, "Clock to USB host has been disabled\n"); -} - -/*-------------------------------------------------------------------------*/ - static const struct hc_driver ohci_omap3_hc_driver = { .description = hcd_name, .product_desc = "OMAP3 OHCI Host Controller", @@ -580,107 +126,77 @@ static const struct hc_driver ohci_omap3_hc_driver = { */ static int __devinit ohci_hcd_omap3_probe(struct platform_device *pdev) { - struct ohci_hcd_omap_platform_data *pdata = pdev->dev.platform_data; - struct ohci_hcd_omap3 *omap; - struct resource *res; - struct usb_hcd *hcd; - int ret = -ENODEV; - int irq; + struct device *dev = &pdev->dev; + struct usb_hcd *hcd = NULL; + void __iomem *regs = NULL; + struct resource *res; + int ret = -ENODEV; + int irq; if (usb_disabled()) - goto err_disabled; + goto err_end; - if (!pdata) { - dev_dbg(&pdev->dev, "missing platform_data\n"); - goto err_pdata; + if (!dev->parent) { + dev_err(dev, "Missing parent device\n"); + return -ENODEV; } - irq = platform_get_irq(pdev, 0); + irq = platform_get_irq_byname(pdev, "ohci-irq"); + if (irq < 0) { + dev_err(dev, "OHCI irq failed\n"); + return -ENODEV; + } - omap = kzalloc(sizeof(*omap), GFP_KERNEL); - if (!omap) { - ret = -ENOMEM; - goto err_disabled; + res = platform_get_resource_byname(pdev, + IORESOURCE_MEM, "ohci"); + if (!ret) { + dev_err(dev, "UHH OHCI get resource failed\n"); + return -ENOMEM; } - hcd = usb_create_hcd(&ohci_omap3_hc_driver, &pdev->dev, - dev_name(&pdev->dev)); - if (!hcd) { - ret = -ENOMEM; - goto err_create_hcd; + regs = ioremap(res->start, resource_size(res)); + if (!regs) { + dev_err(dev, "UHH OHCI ioremap failed\n"); + return -ENOMEM; } - platform_set_drvdata(pdev, omap); - omap->dev = &pdev->dev; - omap->port_mode[0] = pdata->port_mode[0]; - omap->port_mode[1] = pdata->port_mode[1]; - omap->port_mode[2] = pdata->port_mode[2]; - omap->es2_compatibility = pdata->es2_compatibility; - omap->ohci = hcd_to_ohci(hcd); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + hcd = usb_create_hcd(&ohci_omap3_hc_driver, dev, + dev_name(dev)); + if (!hcd) { + dev_err(dev, "usb_create_hcd failed\n"); + goto err_io; + } hcd->rsrc_start = res->start; hcd->rsrc_len = resource_size(res); + hcd->regs = regs; - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) { - dev_err(&pdev->dev, "OHCI ioremap failed\n"); - ret = -ENOMEM; - goto err_ioremap; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - omap->uhh_base = ioremap(res->start, resource_size(res)); - if (!omap->uhh_base) { - dev_err(&pdev->dev, "UHH ioremap failed\n"); - ret = -ENOMEM; - goto err_uhh_ioremap; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 2); - omap->tll_base = ioremap(res->start, resource_size(res)); - if (!omap->tll_base) { - dev_err(&pdev->dev, "TLL ioremap failed\n"); - ret = -ENOMEM; - goto err_tll_ioremap; - } - - ret = omap3_start_ohci(omap, hcd); + ret = omap_usbhs_enable(dev); if (ret) { - dev_dbg(&pdev->dev, "failed to start ohci\n"); - goto err_start; + dev_dbg(dev, "failed to start ohci\n"); + goto err_end; } - ohci_hcd_init(omap->ohci); + ohci_hcd_init(hcd_to_ohci(hcd)); ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); if (ret) { - dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret); + dev_dbg(dev, "failed to add hcd with err %d\n", ret); goto err_add_hcd; } return 0; err_add_hcd: - omap3_stop_ohci(omap, hcd); - -err_start: - iounmap(omap->tll_base); - -err_tll_ioremap: - iounmap(omap->uhh_base); - -err_uhh_ioremap: - iounmap(hcd->regs); + omap_usbhs_disable(dev); -err_ioremap: +err_end: usb_put_hcd(hcd); -err_create_hcd: - kfree(omap); -err_pdata: -err_disabled: +err_io: + iounmap(regs); + return ret; } @@ -699,24 +215,20 @@ err_disabled: */ static int __devexit ohci_hcd_omap3_remove(struct platform_device *pdev) { - struct ohci_hcd_omap3 *omap = platform_get_drvdata(pdev); - struct usb_hcd *hcd = ohci_to_hcd(omap->ohci); + struct device *dev = &pdev->dev; + struct usb_hcd *hcd = dev_get_drvdata(dev); - usb_remove_hcd(hcd); - omap3_stop_ohci(omap, hcd); iounmap(hcd->regs); - iounmap(omap->tll_base); - iounmap(omap->uhh_base); + usb_remove_hcd(hcd); + omap_usbhs_disable(dev); usb_put_hcd(hcd); - kfree(omap); return 0; } static void ohci_hcd_omap3_shutdown(struct platform_device *pdev) { - struct ohci_hcd_omap3 *omap = platform_get_drvdata(pdev); - struct usb_hcd *hcd = ohci_to_hcd(omap->ohci); + struct usb_hcd *hcd = dev_get_drvdata(&pdev->dev); if (hcd->driver->shutdown) hcd->driver->shutdown(hcd); diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 36ee9a666e93..d84d6f0314f9 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -22,24 +22,6 @@ #include <linux/io.h> -/* constants used to work around PM-related transfer - * glitches in some AMD 700 series southbridges - */ -#define AB_REG_BAR 0xf0 -#define AB_INDX(addr) ((addr) + 0x00) -#define AB_DATA(addr) ((addr) + 0x04) -#define AX_INDXC 0X30 -#define AX_DATAC 0x34 - -#define NB_PCIE_INDX_ADDR 0xe0 -#define NB_PCIE_INDX_DATA 0xe4 -#define PCIE_P_CNTL 0x10040 -#define BIF_NB 0x10002 - -static struct pci_dev *amd_smbus_dev; -static struct pci_dev *amd_hb_dev; -static int amd_ohci_iso_count; - /*-------------------------------------------------------------------------*/ static int broken_suspend(struct usb_hcd *hcd) @@ -168,15 +150,18 @@ static int ohci_quirk_nec(struct usb_hcd *hcd) static int ohci_quirk_amd700(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci(hcd); - u8 rev = 0; + struct pci_dev *amd_smbus_dev; + u8 rev; - if (!amd_smbus_dev) - amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, - PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL); + if (usb_amd_find_chipset_info()) + ohci->flags |= OHCI_QUIRK_AMD_PLL; + + amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, + PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL); if (!amd_smbus_dev) return 0; - pci_read_config_byte(amd_smbus_dev, PCI_REVISION_ID, &rev); + rev = amd_smbus_dev->revision; /* SB800 needs pre-fetch fix */ if ((rev >= 0x40) && (rev <= 0x4f)) { @@ -184,19 +169,8 @@ static int ohci_quirk_amd700(struct usb_hcd *hcd) ohci_dbg(ohci, "enabled AMD prefetch quirk\n"); } - if ((rev > 0x3b) || (rev < 0x30)) { - pci_dev_put(amd_smbus_dev); - amd_smbus_dev = NULL; - return 0; - } - - amd_ohci_iso_count++; - - if (!amd_hb_dev) - amd_hb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9600, NULL); - - ohci->flags |= OHCI_QUIRK_AMD_ISO; - ohci_dbg(ohci, "enabled AMD ISO transfers quirk\n"); + pci_dev_put(amd_smbus_dev); + amd_smbus_dev = NULL; return 0; } @@ -215,74 +189,6 @@ static int ohci_quirk_nvidia_shutdown(struct usb_hcd *hcd) return 0; } -/* - * The hardware normally enables the A-link power management feature, which - * lets the system lower the power consumption in idle states. - * - * Assume the system is configured to have USB 1.1 ISO transfers going - * to or from a USB device. Without this quirk, that stream may stutter - * or have breaks occasionally. For transfers going to speakers, this - * makes a very audible mess... - * - * That audio playback corruption is due to the audio stream getting - * interrupted occasionally when the link goes in lower power state - * This USB quirk prevents the link going into that lower power state - * during audio playback or other ISO operations. - */ -static void quirk_amd_pll(int on) -{ - u32 addr; - u32 val; - u32 bit = (on > 0) ? 1 : 0; - - pci_read_config_dword(amd_smbus_dev, AB_REG_BAR, &addr); - - /* BIT names/meanings are NDA-protected, sorry ... */ - - outl(AX_INDXC, AB_INDX(addr)); - outl(0x40, AB_DATA(addr)); - outl(AX_DATAC, AB_INDX(addr)); - val = inl(AB_DATA(addr)); - val &= ~((1 << 3) | (1 << 4) | (1 << 9)); - val |= (bit << 3) | ((!bit) << 4) | ((!bit) << 9); - outl(val, AB_DATA(addr)); - - if (amd_hb_dev) { - addr = PCIE_P_CNTL; - pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_ADDR, addr); - - pci_read_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, &val); - val &= ~(1 | (1 << 3) | (1 << 4) | (1 << 9) | (1 << 12)); - val |= bit | (bit << 3) | (bit << 12); - val |= ((!bit) << 4) | ((!bit) << 9); - pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, val); - - addr = BIF_NB; - pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_ADDR, addr); - - pci_read_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, &val); - val &= ~(1 << 8); - val |= bit << 8; - pci_write_config_dword(amd_hb_dev, NB_PCIE_INDX_DATA, val); - } -} - -static void amd_iso_dev_put(void) -{ - amd_ohci_iso_count--; - if (amd_ohci_iso_count == 0) { - if (amd_smbus_dev) { - pci_dev_put(amd_smbus_dev); - amd_smbus_dev = NULL; - } - if (amd_hb_dev) { - pci_dev_put(amd_hb_dev); - amd_hb_dev = NULL; - } - } - -} - static void sb800_prefetch(struct ohci_hcd *ohci, int on) { struct pci_dev *pdev; diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c index 83094d067e0f..dd24fc115e48 100644 --- a/drivers/usb/host/ohci-q.c +++ b/drivers/usb/host/ohci-q.c @@ -52,7 +52,7 @@ __acquires(ohci->lock) ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs--; if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0) { if (quirk_amdiso(ohci)) - quirk_amd_pll(1); + usb_amd_quirk_pll_enable(); if (quirk_amdprefetch(ohci)) sb800_prefetch(ohci, 0); } @@ -686,7 +686,7 @@ static void td_submit_urb ( } if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0) { if (quirk_amdiso(ohci)) - quirk_amd_pll(0); + usb_amd_quirk_pll_disable(); if (quirk_amdprefetch(ohci)) sb800_prefetch(ohci, 1); } diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index 51facb985c84..bad11a72c202 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -401,7 +401,7 @@ struct ohci_hcd { #define OHCI_QUIRK_NEC 0x40 /* lost interrupts */ #define OHCI_QUIRK_FRAME_NO 0x80 /* no big endian frame_no shift */ #define OHCI_QUIRK_HUB_POWER 0x100 /* distrust firmware power/oc setup */ -#define OHCI_QUIRK_AMD_ISO 0x200 /* ISO transfers*/ +#define OHCI_QUIRK_AMD_PLL 0x200 /* AMD PLL quirk*/ #define OHCI_QUIRK_AMD_PREFETCH 0x400 /* pre-fetch for ISO transfer */ #define OHCI_QUIRK_SHUTDOWN 0x800 /* nVidia power bug */ // there are also chip quirks/bugs in init logic @@ -433,7 +433,7 @@ static inline int quirk_zfmicro(struct ohci_hcd *ohci) } static inline int quirk_amdiso(struct ohci_hcd *ohci) { - return ohci->flags & OHCI_QUIRK_AMD_ISO; + return ohci->flags & OHCI_QUIRK_AMD_PLL; } static inline int quirk_amdprefetch(struct ohci_hcd *ohci) { diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index e0cb12b573f9..38193f4e980e 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -451,9 +451,9 @@ static void ehci_hub_descriptor(struct oxu_hcd *oxu, temp = 1 + (ports / 8); desc->bDescLength = 7 + 2 * temp; - /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */ - memset(&desc->bitmap[0], 0, temp); - memset(&desc->bitmap[temp], 0xff, temp); + /* ports removable, and usb 1.0 legacy PortPwrCtrlMask */ + memset(&desc->u.hs.DeviceRemovable[0], 0, temp); + memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp); temp = 0x0008; /* per-port overcurrent reporting */ if (HCS_PPC(oxu->hcs_params)) diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 4c502c890ebd..1d586d4f7b56 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -52,6 +52,264 @@ #define EHCI_USBLEGCTLSTS 4 /* legacy control/status */ #define EHCI_USBLEGCTLSTS_SOOE (1 << 13) /* SMI on ownership change */ +/* AMD quirk use */ +#define AB_REG_BAR_LOW 0xe0 +#define AB_REG_BAR_HIGH 0xe1 +#define AB_REG_BAR_SB700 0xf0 +#define AB_INDX(addr) ((addr) + 0x00) +#define AB_DATA(addr) ((addr) + 0x04) +#define AX_INDXC 0x30 +#define AX_DATAC 0x34 + +#define NB_PCIE_INDX_ADDR 0xe0 +#define NB_PCIE_INDX_DATA 0xe4 +#define PCIE_P_CNTL 0x10040 +#define BIF_NB 0x10002 +#define NB_PIF0_PWRDOWN_0 0x01100012 +#define NB_PIF0_PWRDOWN_1 0x01100013 + +static struct amd_chipset_info { + struct pci_dev *nb_dev; + struct pci_dev *smbus_dev; + int nb_type; + int sb_type; + int isoc_reqs; + int probe_count; + int probe_result; +} amd_chipset; + +static DEFINE_SPINLOCK(amd_lock); + +int usb_amd_find_chipset_info(void) +{ + u8 rev = 0; + unsigned long flags; + + spin_lock_irqsave(&amd_lock, flags); + + amd_chipset.probe_count++; + /* probe only once */ + if (amd_chipset.probe_count > 1) { + spin_unlock_irqrestore(&amd_lock, flags); + return amd_chipset.probe_result; + } + + amd_chipset.smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI, 0x4385, NULL); + if (amd_chipset.smbus_dev) { + rev = amd_chipset.smbus_dev->revision; + if (rev >= 0x40) + amd_chipset.sb_type = 1; + else if (rev >= 0x30 && rev <= 0x3b) + amd_chipset.sb_type = 3; + } else { + amd_chipset.smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD, + 0x780b, NULL); + if (!amd_chipset.smbus_dev) { + spin_unlock_irqrestore(&amd_lock, flags); + return 0; + } + rev = amd_chipset.smbus_dev->revision; + if (rev >= 0x11 && rev <= 0x18) + amd_chipset.sb_type = 2; + } + + if (amd_chipset.sb_type == 0) { + if (amd_chipset.smbus_dev) { + pci_dev_put(amd_chipset.smbus_dev); + amd_chipset.smbus_dev = NULL; + } + spin_unlock_irqrestore(&amd_lock, flags); + return 0; + } + + amd_chipset.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, 0x9601, NULL); + if (amd_chipset.nb_dev) { + amd_chipset.nb_type = 1; + } else { + amd_chipset.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, + 0x1510, NULL); + if (amd_chipset.nb_dev) { + amd_chipset.nb_type = 2; + } else { + amd_chipset.nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, + 0x9600, NULL); + if (amd_chipset.nb_dev) + amd_chipset.nb_type = 3; + } + } + + amd_chipset.probe_result = 1; + printk(KERN_DEBUG "QUIRK: Enable AMD PLL fix\n"); + + spin_unlock_irqrestore(&amd_lock, flags); + return amd_chipset.probe_result; +} +EXPORT_SYMBOL_GPL(usb_amd_find_chipset_info); + +/* + * The hardware normally enables the A-link power management feature, which + * lets the system lower the power consumption in idle states. + * + * This USB quirk prevents the link going into that lower power state + * during isochronous transfers. + * + * Without this quirk, isochronous stream on OHCI/EHCI/xHCI controllers of + * some AMD platforms may stutter or have breaks occasionally. + */ +static void usb_amd_quirk_pll(int disable) +{ + u32 addr, addr_low, addr_high, val; + u32 bit = disable ? 0 : 1; + unsigned long flags; + + spin_lock_irqsave(&amd_lock, flags); + + if (disable) { + amd_chipset.isoc_reqs++; + if (amd_chipset.isoc_reqs > 1) { + spin_unlock_irqrestore(&amd_lock, flags); + return; + } + } else { + amd_chipset.isoc_reqs--; + if (amd_chipset.isoc_reqs > 0) { + spin_unlock_irqrestore(&amd_lock, flags); + return; + } + } + + if (amd_chipset.sb_type == 1 || amd_chipset.sb_type == 2) { + outb_p(AB_REG_BAR_LOW, 0xcd6); + addr_low = inb_p(0xcd7); + outb_p(AB_REG_BAR_HIGH, 0xcd6); + addr_high = inb_p(0xcd7); + addr = addr_high << 8 | addr_low; + + outl_p(0x30, AB_INDX(addr)); + outl_p(0x40, AB_DATA(addr)); + outl_p(0x34, AB_INDX(addr)); + val = inl_p(AB_DATA(addr)); + } else if (amd_chipset.sb_type == 3) { + pci_read_config_dword(amd_chipset.smbus_dev, + AB_REG_BAR_SB700, &addr); + outl(AX_INDXC, AB_INDX(addr)); + outl(0x40, AB_DATA(addr)); + outl(AX_DATAC, AB_INDX(addr)); + val = inl(AB_DATA(addr)); + } else { + spin_unlock_irqrestore(&amd_lock, flags); + return; + } + + if (disable) { + val &= ~0x08; + val |= (1 << 4) | (1 << 9); + } else { + val |= 0x08; + val &= ~((1 << 4) | (1 << 9)); + } + outl_p(val, AB_DATA(addr)); + + if (!amd_chipset.nb_dev) { + spin_unlock_irqrestore(&amd_lock, flags); + return; + } + + if (amd_chipset.nb_type == 1 || amd_chipset.nb_type == 3) { + addr = PCIE_P_CNTL; + pci_write_config_dword(amd_chipset.nb_dev, + NB_PCIE_INDX_ADDR, addr); + pci_read_config_dword(amd_chipset.nb_dev, + NB_PCIE_INDX_DATA, &val); + + val &= ~(1 | (1 << 3) | (1 << 4) | (1 << 9) | (1 << 12)); + val |= bit | (bit << 3) | (bit << 12); + val |= ((!bit) << 4) | ((!bit) << 9); + pci_write_config_dword(amd_chipset.nb_dev, + NB_PCIE_INDX_DATA, val); + + addr = BIF_NB; + pci_write_config_dword(amd_chipset.nb_dev, + NB_PCIE_INDX_ADDR, addr); + pci_read_config_dword(amd_chipset.nb_dev, + NB_PCIE_INDX_DATA, &val); + val &= ~(1 << 8); + val |= bit << 8; + + pci_write_config_dword(amd_chipset.nb_dev, + NB_PCIE_INDX_DATA, val); + } else if (amd_chipset.nb_type == 2) { + addr = NB_PIF0_PWRDOWN_0; + pci_write_config_dword(amd_chipset.nb_dev, + NB_PCIE_INDX_ADDR, addr); + pci_read_config_dword(amd_chipset.nb_dev, + NB_PCIE_INDX_DATA, &val); + if (disable) + val &= ~(0x3f << 7); + else + val |= 0x3f << 7; + + pci_write_config_dword(amd_chipset.nb_dev, + NB_PCIE_INDX_DATA, val); + + addr = NB_PIF0_PWRDOWN_1; + pci_write_config_dword(amd_chipset.nb_dev, + NB_PCIE_INDX_ADDR, addr); + pci_read_config_dword(amd_chipset.nb_dev, + NB_PCIE_INDX_DATA, &val); + if (disable) + val &= ~(0x3f << 7); + else + val |= 0x3f << 7; + + pci_write_config_dword(amd_chipset.nb_dev, + NB_PCIE_INDX_DATA, val); + } + + spin_unlock_irqrestore(&amd_lock, flags); + return; +} + +void usb_amd_quirk_pll_disable(void) +{ + usb_amd_quirk_pll(1); +} +EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_disable); + +void usb_amd_quirk_pll_enable(void) +{ + usb_amd_quirk_pll(0); +} +EXPORT_SYMBOL_GPL(usb_amd_quirk_pll_enable); + +void usb_amd_dev_put(void) +{ + unsigned long flags; + + spin_lock_irqsave(&amd_lock, flags); + + amd_chipset.probe_count--; + if (amd_chipset.probe_count > 0) { + spin_unlock_irqrestore(&amd_lock, flags); + return; + } + + if (amd_chipset.nb_dev) { + pci_dev_put(amd_chipset.nb_dev); + amd_chipset.nb_dev = NULL; + } + if (amd_chipset.smbus_dev) { + pci_dev_put(amd_chipset.smbus_dev); + amd_chipset.smbus_dev = NULL; + } + amd_chipset.nb_type = 0; + amd_chipset.sb_type = 0; + amd_chipset.isoc_reqs = 0; + amd_chipset.probe_result = 0; + + spin_unlock_irqrestore(&amd_lock, flags); +} +EXPORT_SYMBOL_GPL(usb_amd_dev_put); /* * Make sure the controller is completely inactive, unable to diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h index 1564edfff6fe..6ae9f78e9938 100644 --- a/drivers/usb/host/pci-quirks.h +++ b/drivers/usb/host/pci-quirks.h @@ -1,7 +1,17 @@ #ifndef __LINUX_USB_PCI_QUIRKS_H #define __LINUX_USB_PCI_QUIRKS_H +#ifdef CONFIG_PCI void uhci_reset_hc(struct pci_dev *pdev, unsigned long base); int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base); +int usb_amd_find_chipset_info(void); +void usb_amd_dev_put(void); +void usb_amd_quirk_pll_disable(void); +void usb_amd_quirk_pll_enable(void); +#else +static inline void usb_amd_quirk_pll_disable(void) {} +static inline void usb_amd_quirk_pll_enable(void) {} +static inline void usb_amd_dev_put(void) {} +#endif /* CONFIG_PCI */ #endif /* __LINUX_USB_PCI_QUIRKS_H */ diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 3076b1cc05df..db6f8b9c19b6 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -2150,8 +2150,9 @@ static void r8a66597_hub_descriptor(struct r8a66597 *r8a66597, desc->bDescLength = 9; desc->bPwrOn2PwrGood = 0; desc->wHubCharacteristics = cpu_to_le16(0x0011); - desc->bitmap[0] = ((1 << r8a66597->max_root_hub) - 1) << 1; - desc->bitmap[1] = ~0; + desc->u.hs.DeviceRemovable[0] = + ((1 << r8a66597->max_root_hub) - 1) << 1; + desc->u.hs.DeviceRemovable[1] = ~0; } static int r8a66597_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index 2e9602a10e9b..18b7099a8125 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1111,9 +1111,9 @@ sl811h_hub_descriptor ( desc->wHubCharacteristics = cpu_to_le16(temp); - /* two bitmaps: ports removable, and legacy PortPwrCtrlMask */ - desc->bitmap[0] = 0 << 1; - desc->bitmap[1] = ~0; + /* ports removable, and legacy PortPwrCtrlMask */ + desc->u.hs.DeviceRemovable[0] = 0 << 1; + desc->u.hs.DeviceRemovable[1] = ~0; } static void diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index fab764946c74..b4785934e091 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -2604,13 +2604,14 @@ static int u132_roothub_descriptor(struct u132 *u132, retval = u132_read_pcimem(u132, roothub.b, &rh_b); if (retval) return retval; - memset(desc->bitmap, 0xff, sizeof(desc->bitmap)); - desc->bitmap[0] = rh_b & RH_B_DR; + memset(desc->u.hs.DeviceRemovable, 0xff, + sizeof(desc->u.hs.DeviceRemovable)); + desc->u.hs.DeviceRemovable[0] = rh_b & RH_B_DR; if (u132->num_ports > 7) { - desc->bitmap[1] = (rh_b & RH_B_DR) >> 8; - desc->bitmap[2] = 0xff; + desc->u.hs.DeviceRemovable[1] = (rh_b & RH_B_DR) >> 8; + desc->u.hs.DeviceRemovable[2] = 0xff; } else - desc->bitmap[1] = 0xff; + desc->u.hs.DeviceRemovable[1] = 0xff; return 0; } diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index cee867829ec9..4f65b14e5e08 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -471,7 +471,7 @@ static irqreturn_t uhci_irq(struct usb_hcd *hcd) /* * Store the current frame number in uhci->frame_number if the controller - * is runnning. Expand from 11 bits (of which we use only 10) to a + * is running. Expand from 11 bits (of which we use only 10) to a * full-sized integer. * * Like many other parts of the driver, this code relies on being polled diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h index 78c4edac1db1..ce5c9e51748e 100644 --- a/drivers/usb/host/xhci-ext-caps.h +++ b/drivers/usb/host/xhci-ext-caps.h @@ -19,8 +19,8 @@ * along with this program; if not, write to the Free Software Foundation, * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -/* Up to 16 microframes to halt an HC - one microframe is 125 microsectonds */ -#define XHCI_MAX_HALT_USEC (16*125) +/* Up to 16 ms to halt an HC */ +#define XHCI_MAX_HALT_USEC (16*1000) /* HC not running - set to 1 when run/stop bit is cleared. */ #define XHCI_STS_HALT (1<<0) diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 5d963e350494..a78f2ebd11b7 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -28,27 +28,15 @@ #define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \ PORT_RC | PORT_PLC | PORT_PE) -static void xhci_hub_descriptor(struct xhci_hcd *xhci, - struct usb_hub_descriptor *desc) +static void xhci_common_hub_descriptor(struct xhci_hcd *xhci, + struct usb_hub_descriptor *desc, int ports) { - int ports; u16 temp; - ports = HCS_MAX_PORTS(xhci->hcs_params1); - - /* USB 3.0 hubs have a different descriptor, but we fake this for now */ - desc->bDescriptorType = 0x29; desc->bPwrOn2PwrGood = 10; /* xhci section 5.4.9 says 20ms max */ desc->bHubContrCurrent = 0; desc->bNbrPorts = ports; - temp = 1 + (ports / 8); - desc->bDescLength = 7 + 2 * temp; - - /* Why does core/hcd.h define bitmap? It's just confusing. */ - memset(&desc->DeviceRemovable[0], 0, temp); - memset(&desc->DeviceRemovable[temp], 0xff, temp); - /* Ugh, these should be #defines, FIXME */ /* Using table 11-13 in USB 2.0 spec. */ temp = 0; @@ -65,14 +53,108 @@ static void xhci_hub_descriptor(struct xhci_hcd *xhci, desc->wHubCharacteristics = (__force __u16) cpu_to_le16(temp); } +/* Fill in the USB 2.0 roothub descriptor */ +static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, + struct usb_hub_descriptor *desc) +{ + int ports; + u16 temp; + __u8 port_removable[(USB_MAXCHILDREN + 1 + 7) / 8]; + u32 portsc; + unsigned int i; + + ports = xhci->num_usb2_ports; + + xhci_common_hub_descriptor(xhci, desc, ports); + desc->bDescriptorType = 0x29; + temp = 1 + (ports / 8); + desc->bDescLength = 7 + 2 * temp; + + /* The Device Removable bits are reported on a byte granularity. + * If the port doesn't exist within that byte, the bit is set to 0. + */ + memset(port_removable, 0, sizeof(port_removable)); + for (i = 0; i < ports; i++) { + portsc = xhci_readl(xhci, xhci->usb3_ports[i]); + /* If a device is removable, PORTSC reports a 0, same as in the + * hub descriptor DeviceRemovable bits. + */ + if (portsc & PORT_DEV_REMOVE) + /* This math is hairy because bit 0 of DeviceRemovable + * is reserved, and bit 1 is for port 1, etc. + */ + port_removable[(i + 1) / 8] |= 1 << ((i + 1) % 8); + } + + /* ch11.h defines a hub descriptor that has room for USB_MAXCHILDREN + * ports on it. The USB 2.0 specification says that there are two + * variable length fields at the end of the hub descriptor: + * DeviceRemovable and PortPwrCtrlMask. But since we can have less than + * USB_MAXCHILDREN ports, we may need to use the DeviceRemovable array + * to set PortPwrCtrlMask bits. PortPwrCtrlMask must always be set to + * 0xFF, so we initialize the both arrays (DeviceRemovable and + * PortPwrCtrlMask) to 0xFF. Then we set the DeviceRemovable for each + * set of ports that actually exist. + */ + memset(desc->u.hs.DeviceRemovable, 0xff, + sizeof(desc->u.hs.DeviceRemovable)); + memset(desc->u.hs.PortPwrCtrlMask, 0xff, + sizeof(desc->u.hs.PortPwrCtrlMask)); + + for (i = 0; i < (ports + 1 + 7) / 8; i++) + memset(&desc->u.hs.DeviceRemovable[i], port_removable[i], + sizeof(__u8)); +} + +/* Fill in the USB 3.0 roothub descriptor */ +static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, + struct usb_hub_descriptor *desc) +{ + int ports; + u16 port_removable; + u32 portsc; + unsigned int i; + + ports = xhci->num_usb3_ports; + xhci_common_hub_descriptor(xhci, desc, ports); + desc->bDescriptorType = 0x2a; + desc->bDescLength = 12; + + /* header decode latency should be zero for roothubs, + * see section 4.23.5.2. + */ + desc->u.ss.bHubHdrDecLat = 0; + desc->u.ss.wHubDelay = 0; + + port_removable = 0; + /* bit 0 is reserved, bit 1 is for port 1, etc. */ + for (i = 0; i < ports; i++) { + portsc = xhci_readl(xhci, xhci->usb3_ports[i]); + if (portsc & PORT_DEV_REMOVE) + port_removable |= 1 << (i + 1); + } + memset(&desc->u.ss.DeviceRemovable, + (__force __u16) cpu_to_le16(port_removable), + sizeof(__u16)); +} + +static void xhci_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, + struct usb_hub_descriptor *desc) +{ + + if (hcd->speed == HCD_USB3) + xhci_usb3_hub_descriptor(hcd, xhci, desc); + else + xhci_usb2_hub_descriptor(hcd, xhci, desc); + +} + static unsigned int xhci_port_speed(unsigned int port_status) { if (DEV_LOWSPEED(port_status)) return USB_PORT_STAT_LOW_SPEED; if (DEV_HIGHSPEED(port_status)) return USB_PORT_STAT_HIGH_SPEED; - if (DEV_SUPERSPEED(port_status)) - return USB_PORT_STAT_SUPER_SPEED; /* * FIXME: Yes, we should check for full speed, but the core uses that as * a default in portspeed() in usb/core/hub.c (which is the only place @@ -135,17 +217,22 @@ u32 xhci_port_state_to_neutral(u32 state) /* * find slot id based on port number. + * @port: The one-based port number from one of the two split roothubs. */ -int xhci_find_slot_id_by_port(struct xhci_hcd *xhci, u16 port) +int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci, + u16 port) { int slot_id; int i; + enum usb_device_speed speed; slot_id = 0; for (i = 0; i < MAX_HC_SLOTS; i++) { if (!xhci->devs[i]) continue; - if (xhci->devs[i]->port == port) { + speed = xhci->devs[i]->udev->speed; + if (((speed == USB_SPEED_SUPER) == (hcd->speed == HCD_USB3)) + && xhci->devs[i]->port == port) { slot_id = i; break; } @@ -226,11 +313,11 @@ void xhci_ring_device(struct xhci_hcd *xhci, int slot_id) return; } -static void xhci_disable_port(struct xhci_hcd *xhci, u16 wIndex, - u32 __iomem *addr, u32 port_status) +static void xhci_disable_port(struct usb_hcd *hcd, struct xhci_hcd *xhci, + u16 wIndex, u32 __iomem *addr, u32 port_status) { /* Don't allow the USB core to disable SuperSpeed ports. */ - if (xhci->port_array[wIndex] == 0x03) { + if (hcd->speed == HCD_USB3) { xhci_dbg(xhci, "Ignoring request to disable " "SuperSpeed port.\n"); return; @@ -289,10 +376,18 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, unsigned long flags; u32 temp, temp1, status; int retval = 0; - u32 __iomem *addr; + u32 __iomem **port_array; int slot_id; - - ports = HCS_MAX_PORTS(xhci->hcs_params1); + struct xhci_bus_state *bus_state; + + if (hcd->speed == HCD_USB3) { + ports = xhci->num_usb3_ports; + port_array = xhci->usb3_ports; + } else { + ports = xhci->num_usb2_ports; + port_array = xhci->usb2_ports; + } + bus_state = &xhci->bus_state[hcd_index(hcd)]; spin_lock_irqsave(&xhci->lock, flags); switch (typeReq) { @@ -301,17 +396,35 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, memset(buf, 0, 4); break; case GetHubDescriptor: - xhci_hub_descriptor(xhci, (struct usb_hub_descriptor *) buf); + /* Check to make sure userspace is asking for the USB 3.0 hub + * descriptor for the USB 3.0 roothub. If not, we stall the + * endpoint, like external hubs do. + */ + if (hcd->speed == HCD_USB3 && + (wLength < USB_DT_SS_HUB_SIZE || + wValue != (USB_DT_SS_HUB << 8))) { + xhci_dbg(xhci, "Wrong hub descriptor type for " + "USB 3.0 roothub.\n"); + goto error; + } + xhci_hub_descriptor(hcd, xhci, + (struct usb_hub_descriptor *) buf); break; case GetPortStatus: if (!wIndex || wIndex > ports) goto error; wIndex--; status = 0; - addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(wIndex & 0xff); - temp = xhci_readl(xhci, addr); + temp = xhci_readl(xhci, port_array[wIndex]); + if (temp == 0xffffffff) { + retval = -ENODEV; + break; + } xhci_dbg(xhci, "get port status, actual port %d status = 0x%x\n", wIndex, temp); + /* FIXME - should we return a port status value like the USB + * 3.0 external hubs do? + */ /* wPortChange bits */ if (temp & PORT_CSC) status |= USB_PORT_STAT_C_CONNECTION << 16; @@ -330,38 +443,33 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, if ((temp & PORT_RESET) || !(temp & PORT_PE)) goto error; if (!DEV_SUPERSPEED(temp) && time_after_eq(jiffies, - xhci->resume_done[wIndex])) { + bus_state->resume_done[wIndex])) { xhci_dbg(xhci, "Resume USB2 port %d\n", wIndex + 1); - xhci->resume_done[wIndex] = 0; + bus_state->resume_done[wIndex] = 0; temp1 = xhci_port_state_to_neutral(temp); temp1 &= ~PORT_PLS_MASK; temp1 |= PORT_LINK_STROBE | XDEV_U0; - xhci_writel(xhci, temp1, addr); + xhci_writel(xhci, temp1, port_array[wIndex]); xhci_dbg(xhci, "set port %d resume\n", wIndex + 1); - slot_id = xhci_find_slot_id_by_port(xhci, + slot_id = xhci_find_slot_id_by_port(hcd, xhci, wIndex + 1); if (!slot_id) { xhci_dbg(xhci, "slot_id is zero\n"); goto error; } xhci_ring_device(xhci, slot_id); - xhci->port_c_suspend[wIndex >> 5] |= - 1 << (wIndex & 31); - xhci->suspended_ports[wIndex >> 5] &= - ~(1 << (wIndex & 31)); + bus_state->port_c_suspend |= 1 << wIndex; + bus_state->suspended_ports &= ~(1 << wIndex); } } if ((temp & PORT_PLS_MASK) == XDEV_U0 && (temp & PORT_POWER) - && (xhci->suspended_ports[wIndex >> 5] & - (1 << (wIndex & 31)))) { - xhci->suspended_ports[wIndex >> 5] &= - ~(1 << (wIndex & 31)); - xhci->port_c_suspend[wIndex >> 5] |= - 1 << (wIndex & 31); + && (bus_state->suspended_ports & (1 << wIndex))) { + bus_state->suspended_ports &= ~(1 << wIndex); + bus_state->port_c_suspend |= 1 << wIndex; } if (temp & PORT_CONNECT) { status |= USB_PORT_STAT_CONNECTION; @@ -375,7 +483,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, status |= USB_PORT_STAT_RESET; if (temp & PORT_POWER) status |= USB_PORT_STAT_POWER; - if (xhci->port_c_suspend[wIndex >> 5] & (1 << (wIndex & 31))) + if (bus_state->port_c_suspend & (1 << wIndex)) status |= 1 << USB_PORT_FEAT_C_SUSPEND; xhci_dbg(xhci, "Get port status returned 0x%x\n", status); put_unaligned(cpu_to_le32(status), (__le32 *) buf); @@ -385,12 +493,16 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, if (!wIndex || wIndex > ports) goto error; wIndex--; - addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(wIndex & 0xff); - temp = xhci_readl(xhci, addr); + temp = xhci_readl(xhci, port_array[wIndex]); + if (temp == 0xffffffff) { + retval = -ENODEV; + break; + } temp = xhci_port_state_to_neutral(temp); + /* FIXME: What new port features do we need to support? */ switch (wValue) { case USB_PORT_FEAT_SUSPEND: - temp = xhci_readl(xhci, addr); + temp = xhci_readl(xhci, port_array[wIndex]); /* In spec software should not attempt to suspend * a port unless the port reports that it is in the * enabled (PED = ‘1’,PLS < ‘3’) state. @@ -402,7 +514,8 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, goto error; } - slot_id = xhci_find_slot_id_by_port(xhci, wIndex + 1); + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + wIndex + 1); if (!slot_id) { xhci_warn(xhci, "slot_id is zero\n"); goto error; @@ -415,15 +528,14 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, temp = xhci_port_state_to_neutral(temp); temp &= ~PORT_PLS_MASK; temp |= PORT_LINK_STROBE | XDEV_U3; - xhci_writel(xhci, temp, addr); + xhci_writel(xhci, temp, port_array[wIndex]); spin_unlock_irqrestore(&xhci->lock, flags); msleep(10); /* wait device to enter */ spin_lock_irqsave(&xhci->lock, flags); - temp = xhci_readl(xhci, addr); - xhci->suspended_ports[wIndex >> 5] |= - 1 << (wIndex & (31)); + temp = xhci_readl(xhci, port_array[wIndex]); + bus_state->suspended_ports |= 1 << wIndex; break; case USB_PORT_FEAT_POWER: /* @@ -432,34 +544,39 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, * However, khubd will ignore the roothub events until * the roothub is registered. */ - xhci_writel(xhci, temp | PORT_POWER, addr); + xhci_writel(xhci, temp | PORT_POWER, + port_array[wIndex]); - temp = xhci_readl(xhci, addr); + temp = xhci_readl(xhci, port_array[wIndex]); xhci_dbg(xhci, "set port power, actual port %d status = 0x%x\n", wIndex, temp); break; case USB_PORT_FEAT_RESET: temp = (temp | PORT_RESET); - xhci_writel(xhci, temp, addr); + xhci_writel(xhci, temp, port_array[wIndex]); - temp = xhci_readl(xhci, addr); + temp = xhci_readl(xhci, port_array[wIndex]); xhci_dbg(xhci, "set port reset, actual port %d status = 0x%x\n", wIndex, temp); break; default: goto error; } - temp = xhci_readl(xhci, addr); /* unblock any posted writes */ + /* unblock any posted writes */ + temp = xhci_readl(xhci, port_array[wIndex]); break; case ClearPortFeature: if (!wIndex || wIndex > ports) goto error; wIndex--; - addr = &xhci->op_regs->port_status_base + - NUM_PORT_REGS*(wIndex & 0xff); - temp = xhci_readl(xhci, addr); + temp = xhci_readl(xhci, port_array[wIndex]); + if (temp == 0xffffffff) { + retval = -ENODEV; + break; + } + /* FIXME: What new port features do we need to support? */ temp = xhci_port_state_to_neutral(temp); switch (wValue) { case USB_PORT_FEAT_SUSPEND: - temp = xhci_readl(xhci, addr); + temp = xhci_readl(xhci, port_array[wIndex]); xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n"); xhci_dbg(xhci, "PORTSC %04x\n", temp); if (temp & PORT_RESET) @@ -471,30 +588,34 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, temp = xhci_port_state_to_neutral(temp); temp &= ~PORT_PLS_MASK; temp |= PORT_LINK_STROBE | XDEV_U0; - xhci_writel(xhci, temp, addr); - xhci_readl(xhci, addr); + xhci_writel(xhci, temp, + port_array[wIndex]); + xhci_readl(xhci, port_array[wIndex]); } else { temp = xhci_port_state_to_neutral(temp); temp &= ~PORT_PLS_MASK; temp |= PORT_LINK_STROBE | XDEV_RESUME; - xhci_writel(xhci, temp, addr); + xhci_writel(xhci, temp, + port_array[wIndex]); spin_unlock_irqrestore(&xhci->lock, flags); msleep(20); spin_lock_irqsave(&xhci->lock, flags); - temp = xhci_readl(xhci, addr); + temp = xhci_readl(xhci, + port_array[wIndex]); temp = xhci_port_state_to_neutral(temp); temp &= ~PORT_PLS_MASK; temp |= PORT_LINK_STROBE | XDEV_U0; - xhci_writel(xhci, temp, addr); + xhci_writel(xhci, temp, + port_array[wIndex]); } - xhci->port_c_suspend[wIndex >> 5] |= - 1 << (wIndex & 31); + bus_state->port_c_suspend |= 1 << wIndex; } - slot_id = xhci_find_slot_id_by_port(xhci, wIndex + 1); + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + wIndex + 1); if (!slot_id) { xhci_dbg(xhci, "slot_id is zero\n"); goto error; @@ -502,17 +623,17 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_ring_device(xhci, slot_id); break; case USB_PORT_FEAT_C_SUSPEND: - xhci->port_c_suspend[wIndex >> 5] &= - ~(1 << (wIndex & 31)); + bus_state->port_c_suspend &= ~(1 << wIndex); case USB_PORT_FEAT_C_RESET: case USB_PORT_FEAT_C_CONNECTION: case USB_PORT_FEAT_C_OVER_CURRENT: case USB_PORT_FEAT_C_ENABLE: xhci_clear_port_change_bit(xhci, wValue, wIndex, - addr, temp); + port_array[wIndex], temp); break; case USB_PORT_FEAT_ENABLE: - xhci_disable_port(xhci, wIndex, addr, temp); + xhci_disable_port(hcd, xhci, wIndex, + port_array[wIndex], temp); break; default: goto error; @@ -543,9 +664,17 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) int i, retval; struct xhci_hcd *xhci = hcd_to_xhci(hcd); int ports; - u32 __iomem *addr; - - ports = HCS_MAX_PORTS(xhci->hcs_params1); + u32 __iomem **port_array; + struct xhci_bus_state *bus_state; + + if (hcd->speed == HCD_USB3) { + ports = xhci->num_usb3_ports; + port_array = xhci->usb3_ports; + } else { + ports = xhci->num_usb2_ports; + port_array = xhci->usb2_ports; + } + bus_state = &xhci->bus_state[hcd_index(hcd)]; /* Initial status is no changes */ retval = (ports + 8) / 8; @@ -557,13 +686,15 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) spin_lock_irqsave(&xhci->lock, flags); /* For each port, did anything change? If so, set that bit in buf. */ for (i = 0; i < ports; i++) { - addr = &xhci->op_regs->port_status_base + - NUM_PORT_REGS*i; - temp = xhci_readl(xhci, addr); + temp = xhci_readl(xhci, port_array[i]); + if (temp == 0xffffffff) { + retval = -ENODEV; + break; + } if ((temp & mask) != 0 || - (xhci->port_c_suspend[i >> 5] & 1 << (i & 31)) || - (xhci->resume_done[i] && time_after_eq( - jiffies, xhci->resume_done[i]))) { + (bus_state->port_c_suspend & 1 << i) || + (bus_state->resume_done[i] && time_after_eq( + jiffies, bus_state->resume_done[i]))) { buf[(i + 1) / 8] |= 1 << (i + 1) % 8; status = 1; } @@ -577,42 +708,51 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) int xhci_bus_suspend(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); - int port; + int max_ports, port_index; + u32 __iomem **port_array; + struct xhci_bus_state *bus_state; unsigned long flags; - xhci_dbg(xhci, "suspend root hub\n"); + if (hcd->speed == HCD_USB3) { + max_ports = xhci->num_usb3_ports; + port_array = xhci->usb3_ports; + xhci_dbg(xhci, "suspend USB 3.0 root hub\n"); + } else { + max_ports = xhci->num_usb2_ports; + port_array = xhci->usb2_ports; + xhci_dbg(xhci, "suspend USB 2.0 root hub\n"); + } + bus_state = &xhci->bus_state[hcd_index(hcd)]; spin_lock_irqsave(&xhci->lock, flags); if (hcd->self.root_hub->do_remote_wakeup) { - port = HCS_MAX_PORTS(xhci->hcs_params1); - while (port--) { - if (xhci->resume_done[port] != 0) { + port_index = max_ports; + while (port_index--) { + if (bus_state->resume_done[port_index] != 0) { spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg(xhci, "suspend failed because " "port %d is resuming\n", - port + 1); + port_index + 1); return -EBUSY; } } } - port = HCS_MAX_PORTS(xhci->hcs_params1); - xhci->bus_suspended = 0; - while (port--) { + port_index = max_ports; + bus_state->bus_suspended = 0; + while (port_index--) { /* suspend the port if the port is not suspended */ - u32 __iomem *addr; u32 t1, t2; int slot_id; - addr = &xhci->op_regs->port_status_base + - NUM_PORT_REGS * (port & 0xff); - t1 = xhci_readl(xhci, addr); + t1 = xhci_readl(xhci, port_array[port_index]); t2 = xhci_port_state_to_neutral(t1); if ((t1 & PORT_PE) && !(t1 & PORT_PLS_MASK)) { - xhci_dbg(xhci, "port %d not suspended\n", port); - slot_id = xhci_find_slot_id_by_port(xhci, port + 1); + xhci_dbg(xhci, "port %d not suspended\n", port_index); + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + port_index + 1); if (slot_id) { spin_unlock_irqrestore(&xhci->lock, flags); xhci_stop_device(xhci, slot_id, 1); @@ -620,7 +760,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) } t2 &= ~PORT_PLS_MASK; t2 |= PORT_LINK_STROBE | XDEV_U3; - set_bit(port, &xhci->bus_suspended); + set_bit(port_index, &bus_state->bus_suspended); } if (hcd->self.root_hub->do_remote_wakeup) { if (t1 & PORT_CONNECT) { @@ -635,22 +775,24 @@ int xhci_bus_suspend(struct usb_hcd *hcd) t1 = xhci_port_state_to_neutral(t1); if (t1 != t2) - xhci_writel(xhci, t2, addr); + xhci_writel(xhci, t2, port_array[port_index]); if (DEV_HIGHSPEED(t1)) { /* enable remote wake up for USB 2.0 */ u32 __iomem *addr; u32 tmp; - addr = &xhci->op_regs->port_power_base + - NUM_PORT_REGS * (port & 0xff); + /* Add one to the port status register address to get + * the port power control register address. + */ + addr = port_array[port_index] + 1; tmp = xhci_readl(xhci, addr); tmp |= PORT_RWE; xhci_writel(xhci, tmp, addr); } } hcd->state = HC_STATE_SUSPENDED; - xhci->next_statechange = jiffies + msecs_to_jiffies(10); + bus_state->next_statechange = jiffies + msecs_to_jiffies(10); spin_unlock_irqrestore(&xhci->lock, flags); return 0; } @@ -658,13 +800,24 @@ int xhci_bus_suspend(struct usb_hcd *hcd) int xhci_bus_resume(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); - int port; + int max_ports, port_index; + u32 __iomem **port_array; + struct xhci_bus_state *bus_state; u32 temp; unsigned long flags; - xhci_dbg(xhci, "resume root hub\n"); + if (hcd->speed == HCD_USB3) { + max_ports = xhci->num_usb3_ports; + port_array = xhci->usb3_ports; + xhci_dbg(xhci, "resume USB 3.0 root hub\n"); + } else { + max_ports = xhci->num_usb2_ports; + port_array = xhci->usb2_ports; + xhci_dbg(xhci, "resume USB 2.0 root hub\n"); + } + bus_state = &xhci->bus_state[hcd_index(hcd)]; - if (time_before(jiffies, xhci->next_statechange)) + if (time_before(jiffies, bus_state->next_statechange)) msleep(5); spin_lock_irqsave(&xhci->lock, flags); @@ -678,57 +831,57 @@ int xhci_bus_resume(struct usb_hcd *hcd) temp &= ~CMD_EIE; xhci_writel(xhci, temp, &xhci->op_regs->command); - port = HCS_MAX_PORTS(xhci->hcs_params1); - while (port--) { + port_index = max_ports; + while (port_index--) { /* Check whether need resume ports. If needed resume port and disable remote wakeup */ - u32 __iomem *addr; u32 temp; int slot_id; - addr = &xhci->op_regs->port_status_base + - NUM_PORT_REGS * (port & 0xff); - temp = xhci_readl(xhci, addr); + temp = xhci_readl(xhci, port_array[port_index]); if (DEV_SUPERSPEED(temp)) temp &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS); else temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS); - if (test_bit(port, &xhci->bus_suspended) && + if (test_bit(port_index, &bus_state->bus_suspended) && (temp & PORT_PLS_MASK)) { if (DEV_SUPERSPEED(temp)) { temp = xhci_port_state_to_neutral(temp); temp &= ~PORT_PLS_MASK; temp |= PORT_LINK_STROBE | XDEV_U0; - xhci_writel(xhci, temp, addr); + xhci_writel(xhci, temp, port_array[port_index]); } else { temp = xhci_port_state_to_neutral(temp); temp &= ~PORT_PLS_MASK; temp |= PORT_LINK_STROBE | XDEV_RESUME; - xhci_writel(xhci, temp, addr); + xhci_writel(xhci, temp, port_array[port_index]); spin_unlock_irqrestore(&xhci->lock, flags); msleep(20); spin_lock_irqsave(&xhci->lock, flags); - temp = xhci_readl(xhci, addr); + temp = xhci_readl(xhci, port_array[port_index]); temp = xhci_port_state_to_neutral(temp); temp &= ~PORT_PLS_MASK; temp |= PORT_LINK_STROBE | XDEV_U0; - xhci_writel(xhci, temp, addr); + xhci_writel(xhci, temp, port_array[port_index]); } - slot_id = xhci_find_slot_id_by_port(xhci, port + 1); + slot_id = xhci_find_slot_id_by_port(hcd, + xhci, port_index + 1); if (slot_id) xhci_ring_device(xhci, slot_id); } else - xhci_writel(xhci, temp, addr); + xhci_writel(xhci, temp, port_array[port_index]); if (DEV_HIGHSPEED(temp)) { /* disable remote wake up for USB 2.0 */ u32 __iomem *addr; u32 tmp; - addr = &xhci->op_regs->port_power_base + - NUM_PORT_REGS * (port & 0xff); + /* Add one to the port status register address to get + * the port power control register address. + */ + addr = port_array[port_index] + 1; tmp = xhci_readl(xhci, addr); tmp &= ~PORT_RWE; xhci_writel(xhci, tmp, addr); @@ -737,8 +890,7 @@ int xhci_bus_resume(struct usb_hcd *hcd) (void) xhci_readl(xhci, &xhci->op_regs->command); - xhci->next_statechange = jiffies + msecs_to_jiffies(5); - hcd->state = HC_STATE_RUNNING; + bus_state->next_statechange = jiffies + msecs_to_jiffies(5); /* re-enable irqs */ temp = xhci_readl(xhci, &xhci->op_regs->command); temp |= CMD_EIE; diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index a9534396e85b..a003e79aacdc 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -814,14 +814,64 @@ void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci, ep0_ctx->deq |= ep_ring->cycle_state; } +/* + * The xHCI roothub may have ports of differing speeds in any order in the port + * status registers. xhci->port_array provides an array of the port speed for + * each offset into the port status registers. + * + * The xHCI hardware wants to know the roothub port number that the USB device + * is attached to (or the roothub port its ancestor hub is attached to). All we + * know is the index of that port under either the USB 2.0 or the USB 3.0 + * roothub, but that doesn't give us the real index into the HW port status + * registers. Scan through the xHCI roothub port array, looking for the Nth + * entry of the correct port speed. Return the port number of that entry. + */ +static u32 xhci_find_real_port_number(struct xhci_hcd *xhci, + struct usb_device *udev) +{ + struct usb_device *top_dev; + unsigned int num_similar_speed_ports; + unsigned int faked_port_num; + int i; + + for (top_dev = udev; top_dev->parent && top_dev->parent->parent; + top_dev = top_dev->parent) + /* Found device below root hub */; + faked_port_num = top_dev->portnum; + for (i = 0, num_similar_speed_ports = 0; + i < HCS_MAX_PORTS(xhci->hcs_params1); i++) { + u8 port_speed = xhci->port_array[i]; + + /* + * Skip ports that don't have known speeds, or have duplicate + * Extended Capabilities port speed entries. + */ + if (port_speed == 0 || port_speed == -1) + continue; + + /* + * USB 3.0 ports are always under a USB 3.0 hub. USB 2.0 and + * 1.1 ports are under the USB 2.0 hub. If the port speed + * matches the device speed, it's a similar speed port. + */ + if ((port_speed == 0x03) == (udev->speed == USB_SPEED_SUPER)) + num_similar_speed_ports++; + if (num_similar_speed_ports == faked_port_num) + /* Roothub ports are numbered from 1 to N */ + return i+1; + } + return 0; +} + /* Setup an xHCI virtual device for a Set Address command */ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev) { struct xhci_virt_device *dev; struct xhci_ep_ctx *ep0_ctx; - struct usb_device *top_dev; struct xhci_slot_ctx *slot_ctx; struct xhci_input_control_ctx *ctrl_ctx; + u32 port_num; + struct usb_device *top_dev; dev = xhci->devs[udev->slot_id]; /* Slot ID 0 is reserved */ @@ -863,16 +913,20 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud BUG(); } /* Find the root hub port this device is under */ + port_num = xhci_find_real_port_number(xhci, udev); + if (!port_num) + return -EINVAL; + slot_ctx->dev_info2 |= (u32) ROOT_HUB_PORT(port_num); + /* Set the port number in the virtual_device to the faked port number */ for (top_dev = udev; top_dev->parent && top_dev->parent->parent; top_dev = top_dev->parent) /* Found device below root hub */; - slot_ctx->dev_info2 |= (u32) ROOT_HUB_PORT(top_dev->portnum); dev->port = top_dev->portnum; - xhci_dbg(xhci, "Set root hub portnum to %d\n", top_dev->portnum); + xhci_dbg(xhci, "Set root hub portnum to %d\n", port_num); + xhci_dbg(xhci, "Set fake root hub portnum to %d\n", dev->port); - /* Is this a LS/FS device under a HS hub? */ - if ((udev->speed == USB_SPEED_LOW || udev->speed == USB_SPEED_FULL) && - udev->tt) { + /* Is this a LS/FS device under an external HS hub? */ + if (udev->tt && udev->tt->hub->parent) { slot_ctx->tt_info = udev->tt->hub->slot_id; slot_ctx->tt_info |= udev->ttport << 8; if (udev->tt->multi) @@ -1452,7 +1506,8 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) xhci->page_size = 0; xhci->page_shift = 0; - xhci->bus_suspended = 0; + xhci->bus_state[0].bus_suspended = 0; + xhci->bus_state[1].bus_suspended = 0; } static int xhci_test_trb_in_td(struct xhci_hcd *xhci, @@ -1748,6 +1803,20 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) } xhci_dbg(xhci, "Found %u USB 2.0 ports and %u USB 3.0 ports.\n", xhci->num_usb2_ports, xhci->num_usb3_ports); + + /* Place limits on the number of roothub ports so that the hub + * descriptors aren't longer than the USB core will allocate. + */ + if (xhci->num_usb3_ports > 15) { + xhci_dbg(xhci, "Limiting USB 3.0 roothub ports to 15.\n"); + xhci->num_usb3_ports = 15; + } + if (xhci->num_usb2_ports > USB_MAXCHILDREN) { + xhci_dbg(xhci, "Limiting USB 2.0 roothub ports to %u.\n", + USB_MAXCHILDREN); + xhci->num_usb2_ports = USB_MAXCHILDREN; + } + /* * Note we could have all USB 3.0 ports, or all USB 2.0 ports. * Not sure how the USB core will handle a hub with no ports... @@ -1772,6 +1841,8 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) "addr = %p\n", i, xhci->usb2_ports[port_index]); port_index++; + if (port_index == xhci->num_usb2_ports) + break; } } if (xhci->num_usb3_ports) { @@ -1790,6 +1861,8 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) "addr = %p\n", i, xhci->usb3_ports[port_index]); port_index++; + if (port_index == xhci->num_usb3_ports) + break; } } return 0; @@ -1971,8 +2044,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) init_completion(&xhci->addr_dev); for (i = 0; i < MAX_HC_SLOTS; ++i) xhci->devs[i] = NULL; - for (i = 0; i < MAX_HC_PORTS; ++i) - xhci->resume_done[i] = 0; + for (i = 0; i < USB_MAXCHILDREN; ++i) { + xhci->bus_state[0].resume_done[i] = 0; + xhci->bus_state[1].resume_done[i] = 0; + } if (scratchpad_alloc(xhci, flags)) goto fail; diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index bb668a894ab9..ceea9f33491c 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -50,13 +50,45 @@ static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev) /* called during probe() after chip reset completes */ static int xhci_pci_setup(struct usb_hcd *hcd) { - struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct xhci_hcd *xhci; struct pci_dev *pdev = to_pci_dev(hcd->self.controller); int retval; u32 temp; hcd->self.sg_tablesize = TRBS_PER_SEGMENT - 2; + if (usb_hcd_is_primary_hcd(hcd)) { + xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL); + if (!xhci) + return -ENOMEM; + *((struct xhci_hcd **) hcd->hcd_priv) = xhci; + xhci->main_hcd = hcd; + /* Mark the first roothub as being USB 2.0. + * The xHCI driver will register the USB 3.0 roothub. + */ + hcd->speed = HCD_USB2; + hcd->self.root_hub->speed = USB_SPEED_HIGH; + /* + * USB 2.0 roothub under xHCI has an integrated TT, + * (rate matching hub) as opposed to having an OHCI/UHCI + * companion controller. + */ + hcd->has_tt = 1; + } else { + /* xHCI private pointer was set in xhci_pci_probe for the second + * registered roothub. + */ + xhci = hcd_to_xhci(hcd); + temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params); + if (HCC_64BIT_ADDR(temp)) { + xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n"); + dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64)); + } else { + dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32)); + } + return 0; + } + xhci->cap_regs = hcd->regs; xhci->op_regs = hcd->regs + HC_LENGTH(xhci_readl(xhci, &xhci->cap_regs->hc_capbase)); @@ -85,13 +117,13 @@ static int xhci_pci_setup(struct usb_hcd *hcd) /* Make sure the HC is halted. */ retval = xhci_halt(xhci); if (retval) - return retval; + goto error; xhci_dbg(xhci, "Resetting HCD\n"); /* Reset the internal HC memory state and registers. */ retval = xhci_reset(xhci); if (retval) - return retval; + goto error; xhci_dbg(xhci, "Reset complete\n"); temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params); @@ -106,14 +138,85 @@ static int xhci_pci_setup(struct usb_hcd *hcd) /* Initialize HCD and host controller data structures. */ retval = xhci_init(hcd); if (retval) - return retval; + goto error; xhci_dbg(xhci, "Called HCD init\n"); pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn); xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn); /* Find any debug ports */ - return xhci_pci_reinit(xhci, pdev); + retval = xhci_pci_reinit(xhci, pdev); + if (!retval) + return retval; + +error: + kfree(xhci); + return retval; +} + +/* + * We need to register our own PCI probe function (instead of the USB core's + * function) in order to create a second roothub under xHCI. + */ +static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + int retval; + struct xhci_hcd *xhci; + struct hc_driver *driver; + struct usb_hcd *hcd; + + driver = (struct hc_driver *)id->driver_data; + /* Register the USB 2.0 roothub. + * FIXME: USB core must know to register the USB 2.0 roothub first. + * This is sort of silly, because we could just set the HCD driver flags + * to say USB 2.0, but I'm not sure what the implications would be in + * the other parts of the HCD code. + */ + retval = usb_hcd_pci_probe(dev, id); + + if (retval) + return retval; + + /* USB 2.0 roothub is stored in the PCI device now. */ + hcd = dev_get_drvdata(&dev->dev); + xhci = hcd_to_xhci(hcd); + xhci->shared_hcd = usb_create_shared_hcd(driver, &dev->dev, + pci_name(dev), hcd); + if (!xhci->shared_hcd) { + retval = -ENOMEM; + goto dealloc_usb2_hcd; + } + + /* Set the xHCI pointer before xhci_pci_setup() (aka hcd_driver.reset) + * is called by usb_add_hcd(). + */ + *((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci; + + retval = usb_add_hcd(xhci->shared_hcd, dev->irq, + IRQF_DISABLED | IRQF_SHARED); + if (retval) + goto put_usb3_hcd; + /* Roothub already marked as USB 3.0 speed */ + return 0; + +put_usb3_hcd: + usb_put_hcd(xhci->shared_hcd); +dealloc_usb2_hcd: + usb_hcd_pci_remove(dev); + return retval; +} + +static void xhci_pci_remove(struct pci_dev *dev) +{ + struct xhci_hcd *xhci; + + xhci = hcd_to_xhci(pci_get_drvdata(dev)); + if (xhci->shared_hcd) { + usb_remove_hcd(xhci->shared_hcd); + usb_put_hcd(xhci->shared_hcd); + } + usb_hcd_pci_remove(dev); + kfree(xhci); } #ifdef CONFIG_PM @@ -122,7 +225,8 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) struct xhci_hcd *xhci = hcd_to_xhci(hcd); int retval = 0; - if (hcd->state != HC_STATE_SUSPENDED) + if (hcd->state != HC_STATE_SUSPENDED || + xhci->shared_hcd->state != HC_STATE_SUSPENDED) return -EINVAL; retval = xhci_suspend(xhci); @@ -143,13 +247,13 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) static const struct hc_driver xhci_pci_hc_driver = { .description = hcd_name, .product_desc = "xHCI Host Controller", - .hcd_priv_size = sizeof(struct xhci_hcd), + .hcd_priv_size = sizeof(struct xhci_hcd *), /* * generic hardware linkage */ .irq = xhci_irq, - .flags = HCD_MEMORY | HCD_USB3, + .flags = HCD_MEMORY | HCD_USB3 | HCD_SHARED, /* * basic lifecycle operations @@ -210,8 +314,8 @@ static struct pci_driver xhci_pci_driver = { .name = (char *) hcd_name, .id_table = pci_ids, - .probe = usb_hcd_pci_probe, - .remove = usb_hcd_pci_remove, + .probe = xhci_pci_probe, + .remove = xhci_pci_remove, /* suspend and resume implemented later */ .shutdown = usb_hcd_pci_shutdown, diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 3289bf4832c9..cfc1ad92473f 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -380,10 +380,8 @@ static struct xhci_segment *find_trb_seg( while (cur_seg->trbs > trb || &cur_seg->trbs[TRBS_PER_SEGMENT - 1] < trb) { generic_trb = &cur_seg->trbs[TRBS_PER_SEGMENT - 1].generic; - if ((generic_trb->field[3] & TRB_TYPE_BITMASK) == - TRB_TYPE(TRB_LINK) && - (generic_trb->field[3] & LINK_TOGGLE)) - *cycle_state = ~(*cycle_state) & 0x1; + if (generic_trb->field[3] & LINK_TOGGLE) + *cycle_state ^= 0x1; cur_seg = cur_seg->next; if (cur_seg == start_seg) /* Looped over the entire list. Oops! */ @@ -497,18 +495,29 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, trb = &state->new_deq_ptr->generic; if ((trb->field[3] & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK) && (trb->field[3] & LINK_TOGGLE)) - state->new_cycle_state = ~(state->new_cycle_state) & 0x1; + state->new_cycle_state ^= 0x1; next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr); + /* + * If there is only one segment in a ring, find_trb_seg()'s while loop + * will not run, and it will return before it has a chance to see if it + * needs to toggle the cycle bit. It can't tell if the stalled transfer + * ended just before the link TRB on a one-segment ring, or if the TD + * wrapped around the top of the ring, because it doesn't have the TD in + * question. Look for the one-segment case where stalled TRB's address + * is greater than the new dequeue pointer address. + */ + if (ep_ring->first_seg == ep_ring->first_seg->next && + state->new_deq_ptr < dev->eps[ep_index].stopped_trb) + state->new_cycle_state ^= 0x1; + xhci_dbg(xhci, "Cycle state = 0x%x\n", state->new_cycle_state); + /* Don't update the ring cycle state for the producer (us). */ xhci_dbg(xhci, "New dequeue segment = %p (virtual)\n", state->new_deq_seg); addr = xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr); xhci_dbg(xhci, "New dequeue pointer = 0x%llx (DMA)\n", (unsigned long long) addr); - xhci_dbg(xhci, "Setting dequeue pointer in internal ring state.\n"); - ep_ring->dequeue = state->new_deq_ptr; - ep_ring->deq_seg = state->new_deq_seg; } static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, @@ -599,13 +608,14 @@ static inline void xhci_stop_watchdog_timer_in_irq(struct xhci_hcd *xhci, static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci, struct xhci_td *cur_td, int status, char *adjective) { - struct usb_hcd *hcd = xhci_to_hcd(xhci); + struct usb_hcd *hcd; struct urb *urb; struct urb_priv *urb_priv; urb = cur_td->urb; urb_priv = urb->hcpriv; urb_priv->td_cnt++; + hcd = bus_to_hcd(urb->dev->bus); /* Only giveback urb when this is the last td in urb */ if (urb_priv->td_cnt == urb_priv->length) { @@ -824,8 +834,7 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) if (ret < 0) { /* This is bad; the host is not responding to commands and it's * not allowing itself to be halted. At least interrupts are - * disabled, so we can set HC_STATE_HALT and notify the - * USB core. But if we call usb_hc_died(), it will attempt to + * disabled. If we call usb_hc_died(), it will attempt to * disconnect all device drivers under this host. Those * disconnect() methods will wait for all URBs to be unlinked, * so we must complete them. @@ -870,9 +879,8 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) } } spin_unlock(&xhci->lock); - xhci_to_hcd(xhci)->state = HC_STATE_HALT; xhci_dbg(xhci, "Calling usb_hc_died()\n"); - usb_hc_died(xhci_to_hcd(xhci)); + usb_hc_died(xhci_to_hcd(xhci)->primary_hcd); xhci_dbg(xhci, "xHCI host controller is dead.\n"); } @@ -951,9 +959,26 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci, } else { xhci_dbg(xhci, "Successful Set TR Deq Ptr cmd, deq = @%08llx\n", ep_ctx->deq); + if (xhci_trb_virt_to_dma(dev->eps[ep_index].queued_deq_seg, + dev->eps[ep_index].queued_deq_ptr) == + (ep_ctx->deq & ~(EP_CTX_CYCLE_MASK))) { + /* Update the ring's dequeue segment and dequeue pointer + * to reflect the new position. + */ + ep_ring->deq_seg = dev->eps[ep_index].queued_deq_seg; + ep_ring->dequeue = dev->eps[ep_index].queued_deq_ptr; + } else { + xhci_warn(xhci, "Mismatch between completed Set TR Deq " + "Ptr command & xHCI internal state.\n"); + xhci_warn(xhci, "ep deq seg = %p, deq ptr = %p\n", + dev->eps[ep_index].queued_deq_seg, + dev->eps[ep_index].queued_deq_ptr); + } } dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING; + dev->eps[ep_index].queued_deq_seg = NULL; + dev->eps[ep_index].queued_deq_ptr = NULL; /* Restart any rings with pending URBs */ ring_doorbell_for_active_rings(xhci, slot_id, ep_index); } @@ -1118,7 +1143,6 @@ bandwidth_change: handle_set_deq_completion(xhci, event, xhci->cmd_ring->dequeue); break; case TRB_TYPE(TRB_CMD_NOOP): - ++xhci->noops_handled; break; case TRB_TYPE(TRB_RESET_EP): handle_reset_ep_completion(xhci, event, xhci->cmd_ring->dequeue); @@ -1162,15 +1186,55 @@ static void handle_vendor_event(struct xhci_hcd *xhci, handle_cmd_completion(xhci, &event->event_cmd); } +/* @port_id: the one-based port ID from the hardware (indexed from array of all + * port registers -- USB 3.0 and USB 2.0). + * + * Returns a zero-based port number, which is suitable for indexing into each of + * the split roothubs' port arrays and bus state arrays. + */ +static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd, + struct xhci_hcd *xhci, u32 port_id) +{ + unsigned int i; + unsigned int num_similar_speed_ports = 0; + + /* port_id from the hardware is 1-based, but port_array[], usb3_ports[], + * and usb2_ports are 0-based indexes. Count the number of similar + * speed ports, up to 1 port before this port. + */ + for (i = 0; i < (port_id - 1); i++) { + u8 port_speed = xhci->port_array[i]; + + /* + * Skip ports that don't have known speeds, or have duplicate + * Extended Capabilities port speed entries. + */ + if (port_speed == 0 || port_speed == -1) + continue; + + /* + * USB 3.0 ports are always under a USB 3.0 hub. USB 2.0 and + * 1.1 ports are under the USB 2.0 hub. If the port speed + * matches the device speed, it's a similar speed port. + */ + if ((port_speed == 0x03) == (hcd->speed == HCD_USB3)) + num_similar_speed_ports++; + } + return num_similar_speed_ports; +} + static void handle_port_status(struct xhci_hcd *xhci, union xhci_trb *event) { - struct usb_hcd *hcd = xhci_to_hcd(xhci); + struct usb_hcd *hcd; u32 port_id; u32 temp, temp1; - u32 __iomem *addr; - int ports; + int max_ports; int slot_id; + unsigned int faked_port_index; + u8 major_revision; + struct xhci_bus_state *bus_state; + u32 __iomem **port_array; /* Port status change events always have a successful completion code */ if (GET_COMP_CODE(event->generic.field[2]) != COMP_SUCCESS) { @@ -1180,14 +1244,50 @@ static void handle_port_status(struct xhci_hcd *xhci, port_id = GET_PORT_ID(event->generic.field[0]); xhci_dbg(xhci, "Port Status Change Event for port %d\n", port_id); - ports = HCS_MAX_PORTS(xhci->hcs_params1); - if ((port_id <= 0) || (port_id > ports)) { + max_ports = HCS_MAX_PORTS(xhci->hcs_params1); + if ((port_id <= 0) || (port_id > max_ports)) { xhci_warn(xhci, "Invalid port id %d\n", port_id); goto cleanup; } - addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS * (port_id - 1); - temp = xhci_readl(xhci, addr); + /* Figure out which usb_hcd this port is attached to: + * is it a USB 3.0 port or a USB 2.0/1.1 port? + */ + major_revision = xhci->port_array[port_id - 1]; + if (major_revision == 0) { + xhci_warn(xhci, "Event for port %u not in " + "Extended Capabilities, ignoring.\n", + port_id); + goto cleanup; + } + if (major_revision == (u8) -1) { + xhci_warn(xhci, "Event for port %u duplicated in" + "Extended Capabilities, ignoring.\n", + port_id); + goto cleanup; + } + + /* + * Hardware port IDs reported by a Port Status Change Event include USB + * 3.0 and USB 2.0 ports. We want to check if the port has reported a + * resume event, but we first need to translate the hardware port ID + * into the index into the ports on the correct split roothub, and the + * correct bus_state structure. + */ + /* Find the right roothub. */ + hcd = xhci_to_hcd(xhci); + if ((major_revision == 0x03) != (hcd->speed == HCD_USB3)) + hcd = xhci->shared_hcd; + bus_state = &xhci->bus_state[hcd_index(hcd)]; + if (hcd->speed == HCD_USB3) + port_array = xhci->usb3_ports; + else + port_array = xhci->usb2_ports; + /* Find the faked port hub number */ + faked_port_index = find_faked_portnum_from_hw_portnum(hcd, xhci, + port_id); + + temp = xhci_readl(xhci, port_array[faked_port_index]); if (hcd->state == HC_STATE_SUSPENDED) { xhci_dbg(xhci, "resume root hub\n"); usb_hcd_resume_root_hub(hcd); @@ -1207,8 +1307,9 @@ static void handle_port_status(struct xhci_hcd *xhci, temp = xhci_port_state_to_neutral(temp); temp &= ~PORT_PLS_MASK; temp |= PORT_LINK_STROBE | XDEV_U0; - xhci_writel(xhci, temp, addr); - slot_id = xhci_find_slot_id_by_port(xhci, port_id); + xhci_writel(xhci, temp, port_array[faked_port_index]); + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + faked_port_index); if (!slot_id) { xhci_dbg(xhci, "slot_id is zero\n"); goto cleanup; @@ -1216,16 +1317,16 @@ static void handle_port_status(struct xhci_hcd *xhci, xhci_ring_device(xhci, slot_id); xhci_dbg(xhci, "resume SS port %d finished\n", port_id); /* Clear PORT_PLC */ - temp = xhci_readl(xhci, addr); + temp = xhci_readl(xhci, port_array[faked_port_index]); temp = xhci_port_state_to_neutral(temp); temp |= PORT_PLC; - xhci_writel(xhci, temp, addr); + xhci_writel(xhci, temp, port_array[faked_port_index]); } else { xhci_dbg(xhci, "resume HS port %d\n", port_id); - xhci->resume_done[port_id - 1] = jiffies + + bus_state->resume_done[faked_port_index] = jiffies + msecs_to_jiffies(20); mod_timer(&hcd->rh_timer, - xhci->resume_done[port_id - 1]); + bus_state->resume_done[faked_port_index]); /* Do the rest in GetPortStatus */ } } @@ -1236,7 +1337,7 @@ cleanup: spin_unlock(&xhci->lock); /* Pass this up to the core */ - usb_hcd_poll_rh_status(xhci_to_hcd(xhci)); + usb_hcd_poll_rh_status(hcd); spin_lock(&xhci->lock); } @@ -1990,12 +2091,12 @@ cleanup: trb_comp_code != COMP_BABBLE)) xhci_urb_free_priv(xhci, urb_priv); - usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb); + usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb); xhci_dbg(xhci, "Giveback URB %p, len = %d, " "status = %d\n", urb, urb->actual_length, status); spin_unlock(&xhci->lock); - usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status); + usb_hcd_giveback_urb(bus_to_hcd(urb->dev->bus), urb, status); spin_lock(&xhci->lock); } @@ -2119,7 +2220,6 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) xhci_warn(xhci, "WARNING: Host System Error\n"); xhci_halt(xhci); hw_died: - xhci_to_hcd(xhci)->state = HC_STATE_HALT; spin_unlock(&xhci->lock); return -ESHUTDOWN; } @@ -2187,8 +2287,12 @@ hw_died: irqreturn_t xhci_msi_irq(int irq, struct usb_hcd *hcd) { irqreturn_t ret; + struct xhci_hcd *xhci; + xhci = hcd_to_xhci(hcd); set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); + if (xhci->shared_hcd) + set_bit(HCD_FLAG_SAW_IRQ, &xhci->shared_hcd->flags); ret = xhci_irq(hcd); @@ -2332,7 +2436,7 @@ static int prepare_transfer(struct xhci_hcd *xhci, INIT_LIST_HEAD(&td->cancelled_td_list); if (td_index == 0) { - ret = usb_hcd_link_urb_to_ep(xhci_to_hcd(xhci), urb); + ret = usb_hcd_link_urb_to_ep(bus_to_hcd(urb->dev->bus), urb); if (unlikely(ret)) { xhci_urb_free_priv(xhci, urb_priv); urb->hcpriv = NULL; @@ -3131,24 +3235,6 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, return 0; } -/* Queue a no-op command on the command ring */ -static int queue_cmd_noop(struct xhci_hcd *xhci) -{ - return queue_command(xhci, 0, 0, 0, TRB_TYPE(TRB_CMD_NOOP), false); -} - -/* - * Place a no-op command on the command ring to test the command and - * event ring. - */ -void *xhci_setup_one_noop(struct xhci_hcd *xhci) -{ - if (queue_cmd_noop(xhci) < 0) - return NULL; - xhci->noops_submitted++; - return xhci_ring_cmd_db; -} - /* Queue a slot enable or disable request on the command ring */ int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id) { @@ -3229,6 +3315,7 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id, u32 trb_ep_index = EP_ID_FOR_TRB(ep_index); u32 trb_stream_id = STREAM_ID_FOR_TRB(stream_id); u32 type = TRB_TYPE(TRB_SET_DEQ); + struct xhci_virt_ep *ep; addr = xhci_trb_virt_to_dma(deq_seg, deq_ptr); if (addr == 0) { @@ -3237,6 +3324,14 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id, deq_seg, deq_ptr); return 0; } + ep = &xhci->devs[slot_id]->eps[ep_index]; + if ((ep->ep_state & SET_DEQ_PENDING)) { + xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n"); + xhci_warn(xhci, "A Set TR Deq Ptr command is pending.\n"); + return 0; + } + ep->queued_deq_seg = deq_seg; + ep->queued_deq_ptr = deq_ptr; return queue_command(xhci, lower_32_bits(addr) | cycle_state, upper_32_bits(addr), trb_stream_id, trb_slot_id | trb_ep_index | type, false); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 2083fc2179b2..9a3645fd759b 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -93,17 +93,20 @@ void xhci_quiesce(struct xhci_hcd *xhci) * * Disable any IRQs and clear the run/stop bit. * HC will complete any current and actively pipelined transactions, and - * should halt within 16 microframes of the run/stop bit being cleared. + * should halt within 16 ms of the run/stop bit being cleared. * Read HC Halted bit in the status register to see when the HC is finished. - * XXX: shouldn't we set HC_STATE_HALT here somewhere? */ int xhci_halt(struct xhci_hcd *xhci) { + int ret; xhci_dbg(xhci, "// Halt the HC\n"); xhci_quiesce(xhci); - return handshake(xhci, &xhci->op_regs->status, + ret = handshake(xhci, &xhci->op_regs->status, STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC); + if (!ret) + xhci->xhc_state |= XHCI_STATE_HALTED; + return ret; } /* @@ -130,11 +133,13 @@ static int xhci_start(struct xhci_hcd *xhci) xhci_err(xhci, "Host took too long to start, " "waited %u microseconds.\n", XHCI_MAX_HALT_USEC); + if (!ret) + xhci->xhc_state &= ~XHCI_STATE_HALTED; return ret; } /* - * Reset a halted HC, and set the internal HC state to HC_STATE_HALT. + * Reset a halted HC. * * This resets pipelines, timers, counters, state machines, etc. * Transactions will be terminated immediately, and operational registers @@ -156,8 +161,6 @@ int xhci_reset(struct xhci_hcd *xhci) command = xhci_readl(xhci, &xhci->op_regs->command); command |= CMD_RESET; xhci_writel(xhci, command, &xhci->op_regs->command); - /* XXX: Why does EHCI set this here? Shouldn't other code do this? */ - xhci_to_hcd(xhci)->state = HC_STATE_HALT; ret = handshake(xhci, &xhci->op_regs->command, CMD_RESET, 0, 250 * 1000); @@ -350,7 +353,6 @@ static void xhci_event_ring_work(unsigned long arg) temp = xhci_readl(xhci, &xhci->ir_set->irq_pending); xhci_dbg(xhci, "ir_set 0 pending = 0x%x\n", temp); - xhci_dbg(xhci, "No-op commands handled = %d\n", xhci->noops_handled); xhci_dbg(xhci, "HC error bitmask = 0x%x\n", xhci->error_bitmask); xhci->error_bitmask = 0; xhci_dbg(xhci, "Event ring:\n"); @@ -370,10 +372,6 @@ static void xhci_event_ring_work(unsigned long arg) xhci_dbg_ep_rings(xhci, i, j, &xhci->devs[i]->eps[j]); } } - - if (xhci->noops_submitted != NUM_TEST_NOOPS) - if (xhci_setup_one_noop(xhci)) - xhci_ring_cmd_db(xhci); spin_unlock_irqrestore(&xhci->lock, flags); if (!xhci->zombie) @@ -383,6 +381,21 @@ static void xhci_event_ring_work(unsigned long arg) } #endif +static int xhci_run_finished(struct xhci_hcd *xhci) +{ + if (xhci_start(xhci)) { + xhci_halt(xhci); + return -ENODEV; + } + xhci->shared_hcd->state = HC_STATE_RUNNING; + + if (xhci->quirks & XHCI_NEC_HOST) + xhci_ring_cmd_db(xhci); + + xhci_dbg(xhci, "Finished xhci_run for USB3 roothub\n"); + return 0; +} + /* * Start the HC after it was halted. * @@ -402,9 +415,14 @@ int xhci_run(struct usb_hcd *hcd) u32 ret; struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); - void (*doorbell)(struct xhci_hcd *) = NULL; + + /* Start the xHCI host controller running only after the USB 2.0 roothub + * is setup. + */ hcd->uses_new_polling = 1; + if (!usb_hcd_is_primary_hcd(hcd)) + return xhci_run_finished(xhci); xhci_dbg(xhci, "xhci_run\n"); /* unregister the legacy interrupt */ @@ -461,7 +479,6 @@ int xhci_run(struct usb_hcd *hcd) xhci_writel(xhci, temp, &xhci->ir_set->irq_control); /* Set the HCD state before we enable the irqs */ - hcd->state = HC_STATE_RUNNING; temp = xhci_readl(xhci, &xhci->op_regs->command); temp |= (CMD_EIE); xhci_dbg(xhci, "// Enable interrupts, cmd = 0x%x.\n", @@ -475,24 +492,27 @@ int xhci_run(struct usb_hcd *hcd) &xhci->ir_set->irq_pending); xhci_print_ir_set(xhci, 0); - if (NUM_TEST_NOOPS > 0) - doorbell = xhci_setup_one_noop(xhci); if (xhci->quirks & XHCI_NEC_HOST) xhci_queue_vendor_command(xhci, 0, 0, 0, TRB_TYPE(TRB_NEC_GET_FW)); - if (xhci_start(xhci)) { - xhci_halt(xhci); - return -ENODEV; - } + xhci_dbg(xhci, "Finished xhci_run for USB2 roothub\n"); + return 0; +} - if (doorbell) - (*doorbell)(xhci); - if (xhci->quirks & XHCI_NEC_HOST) - xhci_ring_cmd_db(xhci); +static void xhci_only_stop_hcd(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); - xhci_dbg(xhci, "Finished xhci_run\n"); - return 0; + spin_lock_irq(&xhci->lock); + xhci_halt(xhci); + + /* The shared_hcd is going to be deallocated shortly (the USB core only + * calls this function when allocation fails in usb_add_hcd(), or + * usb_remove_hcd() is called). So we need to unset xHCI's pointer. + */ + xhci->shared_hcd = NULL; + spin_unlock_irq(&xhci->lock); } /* @@ -509,7 +529,15 @@ void xhci_stop(struct usb_hcd *hcd) u32 temp; struct xhci_hcd *xhci = hcd_to_xhci(hcd); + if (!usb_hcd_is_primary_hcd(hcd)) { + xhci_only_stop_hcd(xhci->shared_hcd); + return; + } + spin_lock_irq(&xhci->lock); + /* Make sure the xHC is halted for a USB3 roothub + * (xhci_stop() could be called as part of failed init). + */ xhci_halt(xhci); xhci_reset(xhci); spin_unlock_irq(&xhci->lock); @@ -542,6 +570,8 @@ void xhci_stop(struct usb_hcd *hcd) * This is called when the machine is rebooting or halting. We assume that the * machine will be powered off, and the HC's internal state will be reset. * Don't bother to free memory. + * + * This will only ever be called with the main usb_hcd (the USB3 roothub). */ void xhci_shutdown(struct usb_hcd *hcd) { @@ -657,6 +687,7 @@ int xhci_suspend(struct xhci_hcd *xhci) spin_lock_irq(&xhci->lock); clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags); /* step 1: stop endpoint */ /* skipped assuming that port suspend has done */ @@ -706,10 +737,15 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) { u32 command, temp = 0; struct usb_hcd *hcd = xhci_to_hcd(xhci); - int old_state, retval; + struct usb_hcd *secondary_hcd; + int retval; - old_state = hcd->state; - if (time_before(jiffies, xhci->next_statechange)) + /* Wait a bit if either of the roothubs need to settle from the + * transistion into bus suspend. + */ + if (time_before(jiffies, xhci->bus_state[0].next_statechange) || + time_before(jiffies, + xhci->bus_state[1].next_statechange)) msleep(100); spin_lock_irq(&xhci->lock); @@ -762,16 +798,34 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) xhci_dbg(xhci, "xhci_stop completed - status = %x\n", xhci_readl(xhci, &xhci->op_regs->status)); - xhci_dbg(xhci, "Initialize the HCD\n"); - retval = xhci_init(hcd); + /* USB core calls the PCI reinit and start functions twice: + * first with the primary HCD, and then with the secondary HCD. + * If we don't do the same, the host will never be started. + */ + if (!usb_hcd_is_primary_hcd(hcd)) + secondary_hcd = hcd; + else + secondary_hcd = xhci->shared_hcd; + + xhci_dbg(xhci, "Initialize the xhci_hcd\n"); + retval = xhci_init(hcd->primary_hcd); if (retval) return retval; + xhci_dbg(xhci, "Start the primary HCD\n"); + retval = xhci_run(hcd->primary_hcd); + if (retval) + goto failed_restart; - xhci_dbg(xhci, "Start the HCD\n"); - retval = xhci_run(hcd); - if (!retval) + xhci_dbg(xhci, "Start the secondary HCD\n"); + retval = xhci_run(secondary_hcd); + if (!retval) { set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + set_bit(HCD_FLAG_HW_ACCESSIBLE, + &xhci->shared_hcd->flags); + } +failed_restart: hcd->state = HC_STATE_SUSPENDED; + xhci->shared_hcd->state = HC_STATE_SUSPENDED; return retval; } @@ -792,10 +846,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) */ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - if (!hibernated) - hcd->state = old_state; - else - hcd->state = HC_STATE_SUSPENDED; + set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags); spin_unlock_irq(&xhci->lock); return 0; @@ -1167,13 +1218,13 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) if (ret || !urb->hcpriv) goto done; temp = xhci_readl(xhci, &xhci->op_regs->status); - if (temp == 0xffffffff) { + if (temp == 0xffffffff || (xhci->xhc_state & XHCI_STATE_HALTED)) { xhci_dbg(xhci, "HW died, freeing TD.\n"); urb_priv = urb->hcpriv; usb_hcd_unlink_urb_from_ep(hcd, urb); spin_unlock_irqrestore(&xhci->lock, flags); - usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, -ESHUTDOWN); + usb_hcd_giveback_urb(hcd, urb, -ESHUTDOWN); xhci_urb_free_priv(xhci, urb_priv); return ret; } diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 7f127df6dd55..711de253bc0f 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -644,6 +644,9 @@ struct xhci_ep_ctx { #define AVG_TRB_LENGTH_FOR_EP(p) ((p) & 0xffff) #define MAX_ESIT_PAYLOAD_FOR_EP(p) (((p) & 0xffff) << 16) +/* deq bitmasks */ +#define EP_CTX_CYCLE_MASK (1 << 0) + /** * struct xhci_input_control_context @@ -746,6 +749,12 @@ struct xhci_virt_ep { struct timer_list stop_cmd_timer; int stop_cmds_pending; struct xhci_hcd *xhci; + /* Dequeue pointer and dequeue segment for a submitted Set TR Dequeue + * command. We'll need to update the ring's dequeue segment and dequeue + * pointer after the command completes. + */ + struct xhci_segment *queued_deq_seg; + union xhci_trb *queued_deq_ptr; /* * Sometimes the xHC can not process isochronous endpoint ring quickly * enough, and it will miss some isoc tds on the ring and generate @@ -1161,8 +1170,29 @@ struct s3_save { u64 erst_dequeue; }; +struct xhci_bus_state { + unsigned long bus_suspended; + unsigned long next_statechange; + + /* Port suspend arrays are indexed by the portnum of the fake roothub */ + /* ports suspend status arrays - max 31 ports for USB2, 15 for USB3 */ + u32 port_c_suspend; + u32 suspended_ports; + unsigned long resume_done[USB_MAXCHILDREN]; +}; + +static inline unsigned int hcd_index(struct usb_hcd *hcd) +{ + if (hcd->speed == HCD_USB3) + return 0; + else + return 1; +} + /* There is one ehci_hci structure per controller */ struct xhci_hcd { + struct usb_hcd *main_hcd; + struct usb_hcd *shared_hcd; /* glue to PCI and HCD framework */ struct xhci_cap_regs __iomem *cap_regs; struct xhci_op_regs __iomem *op_regs; @@ -1224,9 +1254,6 @@ struct xhci_hcd { /* Host controller watchdog timer structures */ unsigned int xhc_state; - unsigned long bus_suspended; - unsigned long next_statechange; - u32 command; struct s3_save s3; /* Host controller is dying - not responding to commands. "I'm not dead yet!" @@ -1242,18 +1269,15 @@ struct xhci_hcd { * There are no reports of xHCI host controllers that display this issue. */ #define XHCI_STATE_DYING (1 << 0) +#define XHCI_STATE_HALTED (1 << 1) /* Statistics */ - int noops_submitted; - int noops_handled; int error_bitmask; unsigned int quirks; #define XHCI_LINK_TRB_QUIRK (1 << 0) #define XHCI_RESET_EP_QUIRK (1 << 1) #define XHCI_NEC_HOST (1 << 2) - u32 port_c_suspend[8]; /* port suspend change*/ - u32 suspended_ports[8]; /* which ports are - suspended */ - unsigned long resume_done[MAX_HC_PORTS]; + /* There are two roothubs to keep track of bus suspend info for */ + struct xhci_bus_state bus_state[2]; /* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */ u8 *port_array; /* Array of pointers to USB 3.0 PORTSC registers */ @@ -1264,18 +1288,15 @@ struct xhci_hcd { unsigned int num_usb2_ports; }; -/* For testing purposes */ -#define NUM_TEST_NOOPS 0 - /* convert between an HCD pointer and the corresponding EHCI_HCD */ static inline struct xhci_hcd *hcd_to_xhci(struct usb_hcd *hcd) { - return (struct xhci_hcd *) (hcd->hcd_priv); + return *((struct xhci_hcd **) (hcd->hcd_priv)); } static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci) { - return container_of((void *) xhci, struct usb_hcd, hcd_priv); + return xhci->main_hcd; } #ifdef CONFIG_USB_XHCI_HCD_DEBUGGING @@ -1471,7 +1492,6 @@ struct xhci_segment *trb_in_td(struct xhci_segment *start_seg, dma_addr_t suspect_dma); int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code); void xhci_ring_cmd_db(struct xhci_hcd *xhci); -void *xhci_setup_one_noop(struct xhci_hcd *xhci); int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id); int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr, u32 slot_id); @@ -1525,7 +1545,8 @@ int xhci_bus_resume(struct usb_hcd *hcd); #endif /* CONFIG_PM */ u32 xhci_port_state_to_neutral(u32 state); -int xhci_find_slot_id_by_port(struct xhci_hcd *xhci, u16 port); +int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci, + u16 port); void xhci_ring_device(struct xhci_hcd *xhci, int slot_id); /* xHCI contexts */ diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index a35b427c0bac..388cc128072a 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -83,6 +83,8 @@ static struct usb_device *testdev_to_usbdev(struct usbtest_dev *test) #define WARNING(tdev, fmt, args...) \ dev_warn(&(tdev)->intf->dev , fmt , ## args) +#define GUARD_BYTE 0xA5 + /*-------------------------------------------------------------------------*/ static int @@ -186,11 +188,12 @@ static void simple_callback(struct urb *urb) complete(urb->context); } -static struct urb *simple_alloc_urb( +static struct urb *usbtest_alloc_urb( struct usb_device *udev, int pipe, - unsigned long bytes -) + unsigned long bytes, + unsigned transfer_flags, + unsigned offset) { struct urb *urb; @@ -201,19 +204,46 @@ static struct urb *simple_alloc_urb( urb->interval = (udev->speed == USB_SPEED_HIGH) ? (INTERRUPT_RATE << 3) : INTERRUPT_RATE; - urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP; + urb->transfer_flags = transfer_flags; if (usb_pipein(pipe)) urb->transfer_flags |= URB_SHORT_NOT_OK; - urb->transfer_buffer = usb_alloc_coherent(udev, bytes, GFP_KERNEL, - &urb->transfer_dma); + + if (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) + urb->transfer_buffer = usb_alloc_coherent(udev, bytes + offset, + GFP_KERNEL, &urb->transfer_dma); + else + urb->transfer_buffer = kmalloc(bytes + offset, GFP_KERNEL); + if (!urb->transfer_buffer) { usb_free_urb(urb); - urb = NULL; - } else - memset(urb->transfer_buffer, 0, bytes); + return NULL; + } + + /* To test unaligned transfers add an offset and fill the + unused memory with a guard value */ + if (offset) { + memset(urb->transfer_buffer, GUARD_BYTE, offset); + urb->transfer_buffer += offset; + if (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) + urb->transfer_dma += offset; + } + + /* For inbound transfers use guard byte so that test fails if + data not correctly copied */ + memset(urb->transfer_buffer, + usb_pipein(urb->pipe) ? GUARD_BYTE : 0, + bytes); return urb; } +static struct urb *simple_alloc_urb( + struct usb_device *udev, + int pipe, + unsigned long bytes) +{ + return usbtest_alloc_urb(udev, pipe, bytes, URB_NO_TRANSFER_DMA_MAP, 0); +} + static unsigned pattern; static unsigned mod_pattern; module_param_named(pattern, mod_pattern, uint, S_IRUGO | S_IWUSR); @@ -238,13 +268,38 @@ static inline void simple_fill_buf(struct urb *urb) } } -static inline int simple_check_buf(struct usbtest_dev *tdev, struct urb *urb) +static inline unsigned buffer_offset(void *buf) +{ + return (unsigned)buf & (ARCH_KMALLOC_MINALIGN - 1); +} + +static int check_guard_bytes(struct usbtest_dev *tdev, struct urb *urb) +{ + u8 *buf = urb->transfer_buffer; + u8 *guard = buf - buffer_offset(buf); + unsigned i; + + for (i = 0; guard < buf; i++, guard++) { + if (*guard != GUARD_BYTE) { + ERROR(tdev, "guard byte[%d] %d (not %d)\n", + i, *guard, GUARD_BYTE); + return -EINVAL; + } + } + return 0; +} + +static int simple_check_buf(struct usbtest_dev *tdev, struct urb *urb) { unsigned i; u8 expected; u8 *buf = urb->transfer_buffer; unsigned len = urb->actual_length; + int ret = check_guard_bytes(tdev, urb); + if (ret) + return ret; + for (i = 0; i < len; i++, buf++) { switch (pattern) { /* all-zeroes has no synchronization issues */ @@ -274,8 +329,16 @@ static inline int simple_check_buf(struct usbtest_dev *tdev, struct urb *urb) static void simple_free_urb(struct urb *urb) { - usb_free_coherent(urb->dev, urb->transfer_buffer_length, - urb->transfer_buffer, urb->transfer_dma); + unsigned offset = buffer_offset(urb->transfer_buffer); + + if (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) + usb_free_coherent( + urb->dev, + urb->transfer_buffer_length + offset, + urb->transfer_buffer - offset, + urb->transfer_dma - offset); + else + kfree(urb->transfer_buffer - offset); usb_free_urb(urb); } @@ -1256,7 +1319,7 @@ done: * try whatever we're told to try. */ static int ctrl_out(struct usbtest_dev *dev, - unsigned count, unsigned length, unsigned vary) + unsigned count, unsigned length, unsigned vary, unsigned offset) { unsigned i, j, len; int retval; @@ -1267,10 +1330,11 @@ static int ctrl_out(struct usbtest_dev *dev, if (length < 1 || length > 0xffff || vary >= length) return -EINVAL; - buf = kmalloc(length, GFP_KERNEL); + buf = kmalloc(length + offset, GFP_KERNEL); if (!buf) return -ENOMEM; + buf += offset; udev = testdev_to_usbdev(dev); len = length; retval = 0; @@ -1337,7 +1401,7 @@ static int ctrl_out(struct usbtest_dev *dev, ERROR(dev, "ctrl_out %s failed, code %d, count %d\n", what, retval, i); - kfree(buf); + kfree(buf - offset); return retval; } @@ -1373,6 +1437,8 @@ static void iso_callback(struct urb *urb) ctx->errors += urb->number_of_packets; else if (urb->actual_length != urb->transfer_buffer_length) ctx->errors++; + else if (check_guard_bytes(ctx->dev, urb) != 0) + ctx->errors++; if (urb->status == 0 && ctx->count > (ctx->pending - 1) && !ctx->submit_error) { @@ -1408,7 +1474,8 @@ static struct urb *iso_alloc_urb( struct usb_device *udev, int pipe, struct usb_endpoint_descriptor *desc, - long bytes + long bytes, + unsigned offset ) { struct urb *urb; @@ -1428,13 +1495,24 @@ static struct urb *iso_alloc_urb( urb->number_of_packets = packets; urb->transfer_buffer_length = bytes; - urb->transfer_buffer = usb_alloc_coherent(udev, bytes, GFP_KERNEL, - &urb->transfer_dma); + urb->transfer_buffer = usb_alloc_coherent(udev, bytes + offset, + GFP_KERNEL, + &urb->transfer_dma); if (!urb->transfer_buffer) { usb_free_urb(urb); return NULL; } - memset(urb->transfer_buffer, 0, bytes); + if (offset) { + memset(urb->transfer_buffer, GUARD_BYTE, offset); + urb->transfer_buffer += offset; + urb->transfer_dma += offset; + } + /* For inbound transfers use guard byte so that test fails if + data not correctly copied */ + memset(urb->transfer_buffer, + usb_pipein(urb->pipe) ? GUARD_BYTE : 0, + bytes); + for (i = 0; i < packets; i++) { /* here, only the last packet will be short */ urb->iso_frame_desc[i].length = min((unsigned) bytes, maxp); @@ -1452,7 +1530,7 @@ static struct urb *iso_alloc_urb( static int test_iso_queue(struct usbtest_dev *dev, struct usbtest_param *param, - int pipe, struct usb_endpoint_descriptor *desc) + int pipe, struct usb_endpoint_descriptor *desc, unsigned offset) { struct iso_context context; struct usb_device *udev; @@ -1480,7 +1558,7 @@ test_iso_queue(struct usbtest_dev *dev, struct usbtest_param *param, for (i = 0; i < param->sglen; i++) { urbs[i] = iso_alloc_urb(udev, pipe, desc, - param->length); + param->length, offset); if (!urbs[i]) { status = -ENOMEM; goto fail; @@ -1542,6 +1620,26 @@ fail: return status; } +static int test_unaligned_bulk( + struct usbtest_dev *tdev, + int pipe, + unsigned length, + int iterations, + unsigned transfer_flags, + const char *label) +{ + int retval; + struct urb *urb = usbtest_alloc_urb( + testdev_to_usbdev(tdev), pipe, length, transfer_flags, 1); + + if (!urb) + return -ENOMEM; + + retval = simple_io(tdev, urb, iterations, 0, 0, label); + simple_free_urb(urb); + return retval; +} + /*-------------------------------------------------------------------------*/ /* We only have this one interface to user space, through usbfs. @@ -1843,7 +1941,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf) realworld ? 1 : 0, param->length, param->vary); retval = ctrl_out(dev, param->iterations, - param->length, param->vary); + param->length, param->vary, 0); break; /* iso write tests */ @@ -1856,7 +1954,7 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf) param->sglen, param->length); /* FIRMWARE: iso sink */ retval = test_iso_queue(dev, param, - dev->out_iso_pipe, dev->iso_out); + dev->out_iso_pipe, dev->iso_out, 0); break; /* iso read tests */ @@ -1869,13 +1967,103 @@ usbtest_ioctl(struct usb_interface *intf, unsigned int code, void *buf) param->sglen, param->length); /* FIRMWARE: iso source */ retval = test_iso_queue(dev, param, - dev->in_iso_pipe, dev->iso_in); + dev->in_iso_pipe, dev->iso_in, 0); break; /* FIXME unlink from queue (ring with N urbs) */ /* FIXME scatterlist cancel (needs helper thread) */ + /* Tests for bulk I/O using DMA mapping by core and odd address */ + case 17: + if (dev->out_pipe == 0) + break; + dev_info(&intf->dev, + "TEST 17: write odd addr %d bytes %u times core map\n", + param->length, param->iterations); + + retval = test_unaligned_bulk( + dev, dev->out_pipe, + param->length, param->iterations, + 0, "test17"); + break; + + case 18: + if (dev->in_pipe == 0) + break; + dev_info(&intf->dev, + "TEST 18: read odd addr %d bytes %u times core map\n", + param->length, param->iterations); + + retval = test_unaligned_bulk( + dev, dev->in_pipe, + param->length, param->iterations, + 0, "test18"); + break; + + /* Tests for bulk I/O using premapped coherent buffer and odd address */ + case 19: + if (dev->out_pipe == 0) + break; + dev_info(&intf->dev, + "TEST 19: write odd addr %d bytes %u times premapped\n", + param->length, param->iterations); + + retval = test_unaligned_bulk( + dev, dev->out_pipe, + param->length, param->iterations, + URB_NO_TRANSFER_DMA_MAP, "test19"); + break; + + case 20: + if (dev->in_pipe == 0) + break; + dev_info(&intf->dev, + "TEST 20: read odd addr %d bytes %u times premapped\n", + param->length, param->iterations); + + retval = test_unaligned_bulk( + dev, dev->in_pipe, + param->length, param->iterations, + URB_NO_TRANSFER_DMA_MAP, "test20"); + break; + + /* control write tests with unaligned buffer */ + case 21: + if (!dev->info->ctrl_out) + break; + dev_info(&intf->dev, + "TEST 21: %d ep0out odd addr, %d..%d vary %d\n", + param->iterations, + realworld ? 1 : 0, param->length, + param->vary); + retval = ctrl_out(dev, param->iterations, + param->length, param->vary, 1); + break; + + /* unaligned iso tests */ + case 22: + if (dev->out_iso_pipe == 0 || param->sglen == 0) + break; + dev_info(&intf->dev, + "TEST 22: write %d iso odd, %d entries of %d bytes\n", + param->iterations, + param->sglen, param->length); + retval = test_iso_queue(dev, param, + dev->out_iso_pipe, dev->iso_out, 1); + break; + + case 23: + if (dev->in_iso_pipe == 0 || param->sglen == 0) + break; + dev_info(&intf->dev, + "TEST 23: read %d iso odd, %d entries of %d bytes\n", + param->iterations, + param->sglen, param->length); + retval = test_iso_queue(dev, param, + dev->in_iso_pipe, dev->iso_in, 1); + break; + } do_gettimeofday(¶m->duration); param->duration.tv_sec -= start.tv_sec; diff --git a/drivers/usb/mon/mon_text.c b/drivers/usb/mon/mon_text.c index a545d65f6e57..c302e1983c70 100644 --- a/drivers/usb/mon/mon_text.c +++ b/drivers/usb/mon/mon_text.c @@ -236,6 +236,9 @@ static void mon_text_event(struct mon_reader_text *rp, struct urb *urb, fp++; dp++; } + /* Wasteful, but simple to understand: ISO 'C' is sparse. */ + if (ev_type == 'C') + ep->length = urb->transfer_buffer_length; } ep->setup_flag = mon_text_get_setup(ep, urb, ev_type, rp->r.m_bus); diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index c292d5c499e7..a914010d9d12 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1950,31 +1950,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) goto fail0; } - switch (plat->mode) { - case MUSB_HOST: -#ifdef CONFIG_USB_MUSB_HDRC_HCD - break; -#else - goto bad_config; -#endif - case MUSB_PERIPHERAL: -#ifdef CONFIG_USB_GADGET_MUSB_HDRC - break; -#else - goto bad_config; -#endif - case MUSB_OTG: -#ifdef CONFIG_USB_MUSB_OTG - break; -#else -bad_config: -#endif - default: - dev_err(dev, "incompatible Kconfig role setting\n"); - status = -EINVAL; - goto fail0; - } - /* allocate */ musb = allocate_instance(dev, plat->config, ctrl); if (!musb) { @@ -1982,6 +1957,10 @@ bad_config: goto fail0; } + pm_runtime_use_autosuspend(musb->controller); + pm_runtime_set_autosuspend_delay(musb->controller, 200); + pm_runtime_enable(musb->controller); + spin_lock_init(&musb->lock); musb->board_mode = plat->mode; musb->board_set_power = plat->set_power; @@ -2117,6 +2096,8 @@ bad_config: if (status < 0) goto fail3; + pm_runtime_put(musb->controller); + status = musb_init_debugfs(musb); if (status < 0) goto fail4; @@ -2216,9 +2197,11 @@ static int __exit musb_remove(struct platform_device *pdev) * - Peripheral mode: peripheral is deactivated (or never-activated) * - OTG mode: both roles are deactivated (or never-activated) */ + pm_runtime_get_sync(musb->controller); musb_exit_debugfs(musb); musb_shutdown(pdev); + pm_runtime_put(musb->controller); musb_free(musb); iounmap(ctrl_base); device_init_wakeup(&pdev->dev, 0); @@ -2404,9 +2387,41 @@ static int musb_resume_noirq(struct device *dev) return 0; } +static int musb_runtime_suspend(struct device *dev) +{ + struct musb *musb = dev_to_musb(dev); + + musb_save_context(musb); + + return 0; +} + +static int musb_runtime_resume(struct device *dev) +{ + struct musb *musb = dev_to_musb(dev); + static int first = 1; + + /* + * When pm_runtime_get_sync called for the first time in driver + * init, some of the structure is still not initialized which is + * used in restore function. But clock needs to be + * enabled before any register access, so + * pm_runtime_get_sync has to be called. + * Also context restore without save does not make + * any sense + */ + if (!first) + musb_restore_context(musb); + first = 0; + + return 0; +} + static const struct dev_pm_ops musb_dev_pm_ops = { .suspend = musb_suspend, .resume_noirq = musb_resume_noirq, + .runtime_suspend = musb_runtime_suspend, + .runtime_resume = musb_runtime_resume, }; #define MUSB_DEV_PM_OPS (&musb_dev_pm_ops) diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index e6400be8a0f8..4f0dd2ed3964 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -328,7 +328,7 @@ struct musb_hw_ep { #endif }; -static inline struct usb_request *next_in_request(struct musb_hw_ep *hw_ep) +static inline struct musb_request *next_in_request(struct musb_hw_ep *hw_ep) { #ifdef CONFIG_USB_GADGET_MUSB_HDRC return next_request(&hw_ep->ep_in); @@ -337,7 +337,7 @@ static inline struct usb_request *next_in_request(struct musb_hw_ep *hw_ep) #endif } -static inline struct usb_request *next_out_request(struct musb_hw_ep *hw_ep) +static inline struct musb_request *next_out_request(struct musb_hw_ep *hw_ep) { #ifdef CONFIG_USB_GADGET_MUSB_HDRC return next_request(&hw_ep->ep_out); @@ -358,10 +358,6 @@ struct musb_csr_regs { struct musb_context_registers { -#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \ - defined(CONFIG_ARCH_OMAP4) - u32 otg_sysconfig, otg_forcestandby; -#endif u8 power; u16 intrtxe, intrrxe; u8 intrusbe; diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 2fe304611dcf..5c7b321d3959 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -189,7 +189,7 @@ __acquires(ep->musb->lock) req = to_musb_request(request); - list_del(&request->list); + list_del(&req->list); if (req->request.status == -EINPROGRESS) req->request.status = status; musb = req->musb; @@ -251,9 +251,8 @@ static void nuke(struct musb_ep *ep, const int status) ep->dma = NULL; } - while (!list_empty(&(ep->req_list))) { - req = container_of(ep->req_list.next, struct musb_request, - request.list); + while (!list_empty(&ep->req_list)) { + req = list_first_entry(&ep->req_list, struct musb_request, list); musb_g_giveback(ep, &req->request, status); } } @@ -485,6 +484,7 @@ static void txstate(struct musb *musb, struct musb_request *req) void musb_g_tx(struct musb *musb, u8 epnum) { u16 csr; + struct musb_request *req; struct usb_request *request; u8 __iomem *mbase = musb->mregs; struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_in; @@ -492,7 +492,8 @@ void musb_g_tx(struct musb *musb, u8 epnum) struct dma_channel *dma; musb_ep_select(mbase, epnum); - request = next_request(musb_ep); + req = next_request(musb_ep); + request = &req->request; csr = musb_readw(epio, MUSB_TXCSR); DBG(4, "<== %s, txcsr %04x\n", musb_ep->end_point.name, csr); @@ -571,15 +572,15 @@ void musb_g_tx(struct musb *musb, u8 epnum) if (request->actual == request->length) { musb_g_giveback(musb_ep, request, 0); - request = musb_ep->desc ? next_request(musb_ep) : NULL; - if (!request) { + req = musb_ep->desc ? next_request(musb_ep) : NULL; + if (!req) { DBG(4, "%s idle now\n", musb_ep->end_point.name); return; } } - txstate(musb, to_musb_request(request)); + txstate(musb, req); } } @@ -821,6 +822,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) void musb_g_rx(struct musb *musb, u8 epnum) { u16 csr; + struct musb_request *req; struct usb_request *request; void __iomem *mbase = musb->mregs; struct musb_ep *musb_ep; @@ -835,10 +837,12 @@ void musb_g_rx(struct musb *musb, u8 epnum) musb_ep_select(mbase, epnum); - request = next_request(musb_ep); - if (!request) + req = next_request(musb_ep); + if (!req) return; + request = &req->request; + csr = musb_readw(epio, MUSB_RXCSR); dma = is_dma_capable() ? musb_ep->dma : NULL; @@ -914,15 +918,15 @@ void musb_g_rx(struct musb *musb, u8 epnum) #endif musb_g_giveback(musb_ep, request, 0); - request = next_request(musb_ep); - if (!request) + req = next_request(musb_ep); + if (!req) return; } #if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA) exit: #endif /* Analyze request */ - rxstate(musb, to_musb_request(request)); + rxstate(musb, req); } /* ------------------------------------------------------------ */ @@ -974,7 +978,7 @@ static int musb_gadget_enable(struct usb_ep *ep, ok = musb->hb_iso_rx; if (!ok) { - DBG(4, "%s: not support ISO high bandwidth\n", __func__); + DBG(4, "no support for high bandwidth ISO\n"); goto fail; } musb_ep->hb_mult = (tmp >> 11) & 3; @@ -998,7 +1002,7 @@ static int musb_gadget_enable(struct usb_ep *ep, goto fail; if (tmp > hw_ep->max_packet_sz_tx) { - DBG(4, "%s: packet size beyond hw fifo size\n", __func__); + DBG(4, "packet size beyond hardware FIFO size\n"); goto fail; } @@ -1038,7 +1042,7 @@ static int musb_gadget_enable(struct usb_ep *ep, goto fail; if (tmp > hw_ep->max_packet_sz_rx) { - DBG(4, "%s: packet size beyond hw fifo size\n", __func__); + DBG(4, "packet size beyond hardware FIFO size\n"); goto fail; } @@ -1171,7 +1175,6 @@ struct usb_request *musb_alloc_request(struct usb_ep *ep, gfp_t gfp_flags) return NULL; } - INIT_LIST_HEAD(&request->request.list); request->request.dma = DMA_ADDR_INVALID; request->epnum = musb_ep->current_epnum; request->ep = musb_ep; @@ -1257,10 +1260,10 @@ static int musb_gadget_queue(struct usb_ep *ep, struct usb_request *req, } /* add request to the list */ - list_add_tail(&(request->request.list), &(musb_ep->req_list)); + list_add_tail(&request->list, &musb_ep->req_list); /* it this is the head of the queue, start i/o ... */ - if (!musb_ep->busy && &request->request.list == musb_ep->req_list.next) + if (!musb_ep->busy && &request->list == musb_ep->req_list.next) musb_ep_restart(musb, request); cleanup: @@ -1271,7 +1274,8 @@ cleanup: static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request) { struct musb_ep *musb_ep = to_musb_ep(ep); - struct usb_request *r; + struct musb_request *req = to_musb_request(request); + struct musb_request *r; unsigned long flags; int status = 0; struct musb *musb = musb_ep->musb; @@ -1282,10 +1286,10 @@ static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request) spin_lock_irqsave(&musb->lock, flags); list_for_each_entry(r, &musb_ep->req_list, list) { - if (r == request) + if (r == req) break; } - if (r != request) { + if (r != req) { DBG(3, "request %p not queued to %s\n", request, ep->name); status = -EINVAL; goto done; @@ -1349,7 +1353,7 @@ static int musb_gadget_set_halt(struct usb_ep *ep, int value) musb_ep_select(mbase, epnum); - request = to_musb_request(next_request(musb_ep)); + request = next_request(musb_ep); if (value) { if (request) { DBG(3, "request in progress, cannot halt %s\n", @@ -1801,90 +1805,105 @@ void musb_gadget_cleanup(struct musb *musb) int usb_gadget_probe_driver(struct usb_gadget_driver *driver, int (*bind)(struct usb_gadget *)) { - int retval; - unsigned long flags; - struct musb *musb = the_gadget; + struct musb *musb = the_gadget; + unsigned long flags; + int retval = -EINVAL; if (!driver || driver->speed != USB_SPEED_HIGH || !bind || !driver->setup) - return -EINVAL; + goto err0; /* driver must be initialized to support peripheral mode */ if (!musb) { - DBG(1, "%s, no dev??\n", __func__); - return -ENODEV; + DBG(1, "no dev??\n"); + retval = -ENODEV; + goto err0; } + pm_runtime_get_sync(musb->controller); + DBG(3, "registering driver %s\n", driver->function); - spin_lock_irqsave(&musb->lock, flags); if (musb->gadget_driver) { DBG(1, "%s is already bound to %s\n", musb_driver_name, musb->gadget_driver->driver.name); retval = -EBUSY; - } else { - musb->gadget_driver = driver; - musb->g.dev.driver = &driver->driver; - driver->driver.bus = NULL; - musb->softconnect = 1; - retval = 0; + goto err0; } + spin_lock_irqsave(&musb->lock, flags); + musb->gadget_driver = driver; + musb->g.dev.driver = &driver->driver; + driver->driver.bus = NULL; + musb->softconnect = 1; spin_unlock_irqrestore(&musb->lock, flags); - if (retval == 0) { - retval = bind(&musb->g); - if (retval != 0) { - DBG(3, "bind to driver %s failed --> %d\n", - driver->driver.name, retval); - musb->gadget_driver = NULL; - musb->g.dev.driver = NULL; - } + retval = bind(&musb->g); + if (retval) { + DBG(3, "bind to driver %s failed --> %d\n", + driver->driver.name, retval); + goto err1; + } - spin_lock_irqsave(&musb->lock, flags); + spin_lock_irqsave(&musb->lock, flags); - otg_set_peripheral(musb->xceiv, &musb->g); - musb->xceiv->state = OTG_STATE_B_IDLE; - musb->is_active = 1; + otg_set_peripheral(musb->xceiv, &musb->g); + musb->xceiv->state = OTG_STATE_B_IDLE; + musb->is_active = 1; - /* FIXME this ignores the softconnect flag. Drivers are - * allowed hold the peripheral inactive until for example - * userspace hooks up printer hardware or DSP codecs, so - * hosts only see fully functional devices. - */ + /* + * FIXME this ignores the softconnect flag. Drivers are + * allowed hold the peripheral inactive until for example + * userspace hooks up printer hardware or DSP codecs, so + * hosts only see fully functional devices. + */ - if (!is_otg_enabled(musb)) - musb_start(musb); + if (!is_otg_enabled(musb)) + musb_start(musb); - otg_set_peripheral(musb->xceiv, &musb->g); + otg_set_peripheral(musb->xceiv, &musb->g); - spin_unlock_irqrestore(&musb->lock, flags); + spin_unlock_irqrestore(&musb->lock, flags); - if (is_otg_enabled(musb)) { - struct usb_hcd *hcd = musb_to_hcd(musb); + if (is_otg_enabled(musb)) { + struct usb_hcd *hcd = musb_to_hcd(musb); - DBG(3, "OTG startup...\n"); + DBG(3, "OTG startup...\n"); - /* REVISIT: funcall to other code, which also - * handles power budgeting ... this way also - * ensures HdrcStart is indirectly called. - */ - retval = usb_add_hcd(musb_to_hcd(musb), -1, 0); - if (retval < 0) { - DBG(1, "add_hcd failed, %d\n", retval); - spin_lock_irqsave(&musb->lock, flags); - otg_set_peripheral(musb->xceiv, NULL); - musb->gadget_driver = NULL; - musb->g.dev.driver = NULL; - spin_unlock_irqrestore(&musb->lock, flags); - } else { - hcd->self.uses_pio_for_control = 1; - } + /* REVISIT: funcall to other code, which also + * handles power budgeting ... this way also + * ensures HdrcStart is indirectly called. + */ + retval = usb_add_hcd(musb_to_hcd(musb), -1, 0); + if (retval < 0) { + DBG(1, "add_hcd failed, %d\n", retval); + goto err2; + + if ((musb->xceiv->last_event == USB_EVENT_ID) + && musb->xceiv->set_vbus) + otg_set_vbus(musb->xceiv, 1); } + + hcd->self.uses_pio_for_control = 1; + + if (musb->xceiv->last_event == USB_EVENT_NONE) + pm_runtime_put(musb->controller); + } + return 0; + +err2: + if (!is_otg_enabled(musb)) + musb_stop(musb); + +err1: + musb->gadget_driver = NULL; + musb->g.dev.driver = NULL; + +err0: return retval; } EXPORT_SYMBOL(usb_gadget_probe_driver); @@ -1939,14 +1958,20 @@ static void stop_activity(struct musb *musb, struct usb_gadget_driver *driver) */ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) { - unsigned long flags; - int retval = 0; struct musb *musb = the_gadget; + unsigned long flags; if (!driver || !driver->unbind || !musb) return -EINVAL; - /* REVISIT always use otg_set_peripheral() here too; + if (!musb->gadget_driver) + return -EINVAL; + + if (musb->xceiv->last_event == USB_EVENT_NONE) + pm_runtime_get_sync(musb->controller); + + /* + * REVISIT always use otg_set_peripheral() here too; * this needs to shut down the OTG engine. */ @@ -1956,29 +1981,26 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) musb_hnp_stop(musb); #endif - if (musb->gadget_driver == driver) { + (void) musb_gadget_vbus_draw(&musb->g, 0); - (void) musb_gadget_vbus_draw(&musb->g, 0); + musb->xceiv->state = OTG_STATE_UNDEFINED; + stop_activity(musb, driver); + otg_set_peripheral(musb->xceiv, NULL); - musb->xceiv->state = OTG_STATE_UNDEFINED; - stop_activity(musb, driver); - otg_set_peripheral(musb->xceiv, NULL); + DBG(3, "unregistering driver %s\n", driver->function); - DBG(3, "unregistering driver %s\n", driver->function); - spin_unlock_irqrestore(&musb->lock, flags); - driver->unbind(&musb->g); - spin_lock_irqsave(&musb->lock, flags); + spin_unlock_irqrestore(&musb->lock, flags); + driver->unbind(&musb->g); + spin_lock_irqsave(&musb->lock, flags); - musb->gadget_driver = NULL; - musb->g.dev.driver = NULL; + musb->gadget_driver = NULL; + musb->g.dev.driver = NULL; - musb->is_active = 0; - musb_platform_try_idle(musb, 0); - } else - retval = -EINVAL; + musb->is_active = 0; + musb_platform_try_idle(musb, 0); spin_unlock_irqrestore(&musb->lock, flags); - if (is_otg_enabled(musb) && retval == 0) { + if (is_otg_enabled(musb)) { usb_remove_hcd(musb_to_hcd(musb)); /* FIXME we need to be able to register another * gadget driver here and have everything work; @@ -1986,7 +2008,12 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) */ } - return retval; + if (!is_otg_enabled(musb)) + musb_stop(musb); + + pm_runtime_put(musb->controller); + + return 0; } EXPORT_SYMBOL(usb_gadget_unregister_driver); diff --git a/drivers/usb/musb/musb_gadget.h b/drivers/usb/musb/musb_gadget.h index a55354fbccf5..66b7c5e0fb44 100644 --- a/drivers/usb/musb/musb_gadget.h +++ b/drivers/usb/musb/musb_gadget.h @@ -35,6 +35,8 @@ #ifndef __MUSB_GADGET_H #define __MUSB_GADGET_H +#include <linux/list.h> + enum buffer_map_state { UN_MAPPED = 0, PRE_MAPPED, @@ -43,6 +45,7 @@ enum buffer_map_state { struct musb_request { struct usb_request request; + struct list_head list; struct musb_ep *ep; struct musb *musb; u8 tx; /* endpoint direction */ @@ -94,13 +97,13 @@ static inline struct musb_ep *to_musb_ep(struct usb_ep *ep) return ep ? container_of(ep, struct musb_ep, end_point) : NULL; } -static inline struct usb_request *next_request(struct musb_ep *ep) +static inline struct musb_request *next_request(struct musb_ep *ep) { struct list_head *queue = &ep->req_list; if (list_empty(queue)) return NULL; - return container_of(queue->next, struct usb_request, list); + return container_of(queue->next, struct musb_request, list); } extern void musb_g_tx(struct musb *musb, u8 epnum); diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c index 6dd03f4c5f49..75a542e42fdf 100644 --- a/drivers/usb/musb/musb_gadget_ep0.c +++ b/drivers/usb/musb/musb_gadget_ep0.c @@ -304,8 +304,7 @@ __acquires(musb->lock) } /* Maybe start the first request in the queue */ - request = to_musb_request( - next_request(musb_ep)); + request = next_request(musb_ep); if (!musb_ep->busy && request) { DBG(3, "restarting the request\n"); musb_ep_restart(musb, request); @@ -491,10 +490,12 @@ stall: static void ep0_rxstate(struct musb *musb) { void __iomem *regs = musb->control_ep->regs; + struct musb_request *request; struct usb_request *req; u16 count, csr; - req = next_ep0_request(musb); + request = next_ep0_request(musb); + req = &request->request; /* read packet and ack; or stall because of gadget driver bug: * should have provided the rx buffer before setup() returned. @@ -544,17 +545,20 @@ static void ep0_rxstate(struct musb *musb) static void ep0_txstate(struct musb *musb) { void __iomem *regs = musb->control_ep->regs; - struct usb_request *request = next_ep0_request(musb); + struct musb_request *req = next_ep0_request(musb); + struct usb_request *request; u16 csr = MUSB_CSR0_TXPKTRDY; u8 *fifo_src; u8 fifo_count; - if (!request) { + if (!req) { /* WARN_ON(1); */ DBG(2, "odd; csr0 %04x\n", musb_readw(regs, MUSB_CSR0)); return; } + request = &req->request; + /* load the data */ fifo_src = (u8 *) request->buf + request->actual; fifo_count = min((unsigned) MUSB_EP0_FIFOSIZE, @@ -598,7 +602,7 @@ static void ep0_txstate(struct musb *musb) static void musb_read_setup(struct musb *musb, struct usb_ctrlrequest *req) { - struct usb_request *r; + struct musb_request *r; void __iomem *regs = musb->control_ep->regs; musb_read_fifo(&musb->endpoints[0], sizeof *req, (u8 *)req); @@ -616,7 +620,7 @@ musb_read_setup(struct musb *musb, struct usb_ctrlrequest *req) /* clean up any leftover transfers */ r = next_ep0_request(musb); if (r) - musb_g_ep0_giveback(musb, r); + musb_g_ep0_giveback(musb, &r->request); /* For zero-data requests we want to delay the STATUS stage to * avoid SETUPEND errors. If we read data (OUT), delay accepting @@ -758,11 +762,11 @@ irqreturn_t musb_g_ep0_irq(struct musb *musb) case MUSB_EP0_STAGE_STATUSOUT: /* end of sequence #1: write to host (TX state) */ { - struct usb_request *req; + struct musb_request *req; req = next_ep0_request(musb); if (req) - musb_g_ep0_giveback(musb, req); + musb_g_ep0_giveback(musb, &req->request); } /* @@ -961,7 +965,7 @@ musb_g_ep0_queue(struct usb_ep *e, struct usb_request *r, gfp_t gfp_flags) } /* add request to the list */ - list_add_tail(&(req->request.list), &(ep->req_list)); + list_add_tail(&req->list, &ep->req_list); DBG(3, "queue to %s (%s), length=%d\n", ep->name, ep->is_in ? "IN/TX" : "OUT/RX", diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 0f523d7db57b..5eef4a8847db 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1335,7 +1335,7 @@ void musb_host_tx(struct musb *musb, u8 epnum) if (length > qh->maxpacket) length = qh->maxpacket; /* Unmap the buffer so that CPU can use it */ - unmap_urb_for_dma(musb_to_hcd(musb), urb); + usb_hcd_unmap_urb_for_dma(musb_to_hcd(musb), urb); musb_write_fifo(hw_ep, length, urb->transfer_buffer + offset); qh->segsize = length; @@ -1757,7 +1757,7 @@ void musb_host_rx(struct musb *musb, u8 epnum) if (!dma) { /* Unmap the buffer so that CPU can use it */ - unmap_urb_for_dma(musb_to_hcd(musb), urb); + usb_hcd_unmap_urb_for_dma(musb_to_hcd(musb), urb); done = musb_host_packet_rx(musb, urb, epnum, iso_err); DBG(6, "read %spacket\n", done ? "last " : ""); diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c index b46d1877e28e..489104a5ae14 100644 --- a/drivers/usb/musb/musb_virthub.c +++ b/drivers/usb/musb/musb_virthub.c @@ -305,8 +305,8 @@ int musb_hub_control( desc->bHubContrCurrent = 0; /* workaround bogus struct definition */ - desc->DeviceRemovable[0] = 0x02; /* port 1 */ - desc->DeviceRemovable[1] = 0xff; + desc->u.hs.DeviceRemovable[0] = 0x02; /* port 1 */ + desc->u.hs.DeviceRemovable[1] = 0xff; } break; case GetHubStatus: diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index bc8badd16897..25cb8b0003b1 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -33,6 +33,8 @@ #include <linux/io.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/pm_runtime.h> +#include <linux/err.h> #include "musb_core.h" #include "omap2430.h" @@ -40,7 +42,6 @@ struct omap2430_glue { struct device *dev; struct platform_device *musb; - struct clk *clk; }; #define glue_to_musb(g) platform_get_drvdata(g->musb) @@ -216,20 +217,12 @@ static inline void omap2430_low_level_exit(struct musb *musb) l = musb_readl(musb->mregs, OTG_FORCESTDBY); l |= ENABLEFORCE; /* enable MSTANDBY */ musb_writel(musb->mregs, OTG_FORCESTDBY, l); - - l = musb_readl(musb->mregs, OTG_SYSCONFIG); - l |= ENABLEWAKEUP; /* enable wakeup */ - musb_writel(musb->mregs, OTG_SYSCONFIG, l); } static inline void omap2430_low_level_init(struct musb *musb) { u32 l; - l = musb_readl(musb->mregs, OTG_SYSCONFIG); - l &= ~ENABLEWAKEUP; /* disable wakeup */ - musb_writel(musb->mregs, OTG_SYSCONFIG, l); - l = musb_readl(musb->mregs, OTG_FORCESTDBY); l &= ~ENABLEFORCE; /* disable MSTANDBY */ musb_writel(musb->mregs, OTG_FORCESTDBY, l); @@ -251,31 +244,39 @@ static int musb_otg_notifications(struct notifier_block *nb, if (is_otg_enabled(musb)) { #ifdef CONFIG_USB_GADGET_MUSB_HDRC if (musb->gadget_driver) { + pm_runtime_get_sync(musb->controller); otg_init(musb->xceiv); - - if (data->interface_type == - MUSB_INTERFACE_UTMI) - omap2430_musb_set_vbus(musb, 1); - + omap2430_musb_set_vbus(musb, 1); } #endif } else { + pm_runtime_get_sync(musb->controller); otg_init(musb->xceiv); - if (data->interface_type == - MUSB_INTERFACE_UTMI) - omap2430_musb_set_vbus(musb, 1); + omap2430_musb_set_vbus(musb, 1); } break; case USB_EVENT_VBUS: DBG(4, "VBUS Connect\n"); + if (musb->gadget_driver) + pm_runtime_get_sync(musb->controller); + otg_init(musb->xceiv); break; case USB_EVENT_NONE: DBG(4, "VBUS Disconnect\n"); +#ifdef CONFIG_USB_GADGET_MUSB_HDRC + if (is_otg_enabled(musb)) + if (musb->gadget_driver) +#endif + { + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); + } + if (data->interface_type == MUSB_INTERFACE_UTMI) { if (musb->xceiv->set_vbus) otg_set_vbus(musb->xceiv, 0); @@ -307,22 +308,11 @@ static int omap2430_musb_init(struct musb *musb) return -ENODEV; } - omap2430_low_level_init(musb); - - l = musb_readl(musb->mregs, OTG_SYSCONFIG); - l &= ~ENABLEWAKEUP; /* disable wakeup */ - l &= ~NOSTDBY; /* remove possible nostdby */ - l |= SMARTSTDBY; /* enable smart standby */ - l &= ~AUTOIDLE; /* disable auto idle */ - l &= ~NOIDLE; /* remove possible noidle */ - l |= SMARTIDLE; /* enable smart idle */ - /* - * MUSB AUTOIDLE don't work in 3430. - * Workaround by Richard Woodruff/TI - */ - if (!cpu_is_omap3430()) - l |= AUTOIDLE; /* enable auto idle */ - musb_writel(musb->mregs, OTG_SYSCONFIG, l); + status = pm_runtime_get_sync(dev); + if (status < 0) { + dev_err(dev, "pm_runtime_get_sync FAILED"); + goto err1; + } l = musb_readl(musb->mregs, OTG_INTERFSEL); @@ -350,14 +340,58 @@ static int omap2430_musb_init(struct musb *musb) if (status) DBG(1, "notification register failed\n"); - /* check whether cable is already connected */ - if (musb->xceiv->state ==OTG_STATE_B_IDLE) - musb_otg_notifications(&musb->nb, 1, - musb->xceiv->gadget); - setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb); return 0; + +err1: + pm_runtime_disable(dev); + return status; +} + +static void omap2430_musb_enable(struct musb *musb) +{ + u8 devctl; + unsigned long timeout = jiffies + msecs_to_jiffies(1000); + struct device *dev = musb->controller; + struct musb_hdrc_platform_data *pdata = dev->platform_data; + struct omap_musb_board_data *data = pdata->board_data; + + switch (musb->xceiv->last_event) { + + case USB_EVENT_ID: + otg_init(musb->xceiv); + if (data->interface_type == MUSB_INTERFACE_UTMI) { + devctl = musb_readb(musb->mregs, MUSB_DEVCTL); + /* start the session */ + devctl |= MUSB_DEVCTL_SESSION; + musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); + while (musb_readb(musb->mregs, MUSB_DEVCTL) & + MUSB_DEVCTL_BDEVICE) { + cpu_relax(); + + if (time_after(jiffies, timeout)) { + dev_err(musb->controller, + "configured as A device timeout"); + break; + } + } + } + break; + + case USB_EVENT_VBUS: + otg_init(musb->xceiv); + break; + + default: + break; + } +} + +static void omap2430_musb_disable(struct musb *musb) +{ + if (musb->xceiv->last_event) + otg_shutdown(musb->xceiv); } static int omap2430_musb_exit(struct musb *musb) @@ -378,6 +412,9 @@ static const struct musb_platform_ops omap2430_ops = { .try_idle = omap2430_musb_try_idle, .set_vbus = omap2430_musb_set_vbus, + + .enable = omap2430_musb_enable, + .disable = omap2430_musb_disable, }; static u64 omap2430_dmamask = DMA_BIT_MASK(32); @@ -387,8 +424,6 @@ static int __init omap2430_probe(struct platform_device *pdev) struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data; struct platform_device *musb; struct omap2430_glue *glue; - struct clk *clk; - int ret = -ENOMEM; glue = kzalloc(sizeof(*glue), GFP_KERNEL); @@ -403,26 +438,12 @@ static int __init omap2430_probe(struct platform_device *pdev) goto err1; } - clk = clk_get(&pdev->dev, "ick"); - if (IS_ERR(clk)) { - dev_err(&pdev->dev, "failed to get clock\n"); - ret = PTR_ERR(clk); - goto err2; - } - - ret = clk_enable(clk); - if (ret) { - dev_err(&pdev->dev, "failed to enable clock\n"); - goto err3; - } - musb->dev.parent = &pdev->dev; musb->dev.dma_mask = &omap2430_dmamask; musb->dev.coherent_dma_mask = omap2430_dmamask; glue->dev = &pdev->dev; glue->musb = musb; - glue->clk = clk; pdata->platform_ops = &omap2430_ops; @@ -432,28 +453,24 @@ static int __init omap2430_probe(struct platform_device *pdev) pdev->num_resources); if (ret) { dev_err(&pdev->dev, "failed to add resources\n"); - goto err4; + goto err2; } ret = platform_device_add_data(musb, pdata, sizeof(*pdata)); if (ret) { dev_err(&pdev->dev, "failed to add platform_data\n"); - goto err4; + goto err2; } ret = platform_device_add(musb); if (ret) { dev_err(&pdev->dev, "failed to register musb device\n"); - goto err4; + goto err2; } - return 0; - -err4: - clk_disable(clk); + pm_runtime_enable(&pdev->dev); -err3: - clk_put(clk); + return 0; err2: platform_device_put(musb); @@ -471,61 +488,40 @@ static int __exit omap2430_remove(struct platform_device *pdev) platform_device_del(glue->musb); platform_device_put(glue->musb); - clk_disable(glue->clk); - clk_put(glue->clk); + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); kfree(glue); return 0; } #ifdef CONFIG_PM -static void omap2430_save_context(struct musb *musb) -{ - musb->context.otg_sysconfig = musb_readl(musb->mregs, OTG_SYSCONFIG); - musb->context.otg_forcestandby = musb_readl(musb->mregs, OTG_FORCESTDBY); -} -static void omap2430_restore_context(struct musb *musb) -{ - musb_writel(musb->mregs, OTG_SYSCONFIG, musb->context.otg_sysconfig); - musb_writel(musb->mregs, OTG_FORCESTDBY, musb->context.otg_forcestandby); -} - -static int omap2430_suspend(struct device *dev) +static int omap2430_runtime_suspend(struct device *dev) { struct omap2430_glue *glue = dev_get_drvdata(dev); struct musb *musb = glue_to_musb(glue); omap2430_low_level_exit(musb); otg_set_suspend(musb->xceiv, 1); - omap2430_save_context(musb); - clk_disable(glue->clk); return 0; } -static int omap2430_resume(struct device *dev) +static int omap2430_runtime_resume(struct device *dev) { struct omap2430_glue *glue = dev_get_drvdata(dev); struct musb *musb = glue_to_musb(glue); - int ret; - - ret = clk_enable(glue->clk); - if (ret) { - dev_err(dev, "faled to enable clock\n"); - return ret; - } omap2430_low_level_init(musb); - omap2430_restore_context(musb); otg_set_suspend(musb->xceiv, 0); return 0; } static struct dev_pm_ops omap2430_pm_ops = { - .suspend = omap2430_suspend, - .resume = omap2430_resume, + .runtime_suspend = omap2430_runtime_suspend, + .runtime_resume = omap2430_runtime_resume, }; #define DEV_PM_OPS (&omap2430_pm_ops) diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c index c061a88f2b0f..99cb541e4ef0 100644 --- a/drivers/usb/musb/tusb6010_omap.c +++ b/drivers/usb/musb/tusb6010_omap.c @@ -680,7 +680,7 @@ dma_controller_create(struct musb *musb, void __iomem *base) tusb_dma = kzalloc(sizeof(struct tusb_omap_dma), GFP_KERNEL); if (!tusb_dma) - goto cleanup; + goto out; tusb_dma->musb = musb; tusb_dma->tbase = musb->ctrl_base; @@ -721,6 +721,6 @@ dma_controller_create(struct musb *musb, void __iomem *base) cleanup: dma_controller_destroy(&tusb_dma->controller); - +out: return NULL; } diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index 9ffc8237fb4b..daf3e5f1a0e7 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -49,6 +49,13 @@ config USB_ULPI Enable this to support ULPI connected USB OTG transceivers which are likely found on embedded boards. +config USB_ULPI_VIEWPORT + bool + depends on USB_ULPI + help + Provides read/write operations to the ULPI phy register set for + controllers with a viewport register (e.g. Chipidea/ARC controllers). + config TWL4030_USB tristate "TWL4030 USB Transceiver Driver" depends on TWL4030_CORE && REGULATOR_TWL4030 @@ -93,7 +100,7 @@ config USB_LANGWELL_OTG To compile this driver as a module, choose M here: the module will be called langwell_otg. -config USB_MSM_OTG_72K +config USB_MSM_OTG tristate "OTG support for Qualcomm on-chip USB controller" depends on (USB || USB_GADGET) && ARCH_MSM select USB_OTG_UTILS diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile index a520e715cfd6..e22d917de017 100644 --- a/drivers/usb/otg/Makefile +++ b/drivers/usb/otg/Makefile @@ -16,5 +16,6 @@ obj-$(CONFIG_TWL6030_USB) += twl6030-usb.o obj-$(CONFIG_USB_LANGWELL_OTG) += langwell_otg.o obj-$(CONFIG_NOP_USB_XCEIV) += nop-usb-xceiv.o obj-$(CONFIG_USB_ULPI) += ulpi.o -obj-$(CONFIG_USB_MSM_OTG_72K) += msm72k_otg.o +obj-$(CONFIG_USB_ULPI_VIEWPORT) += ulpi_viewport.o +obj-$(CONFIG_USB_MSM_OTG) += msm_otg.o obj-$(CONFIG_AB8500_USB) += ab8500-usb.o diff --git a/drivers/usb/otg/ab8500-usb.c b/drivers/usb/otg/ab8500-usb.c index d14736b3107b..07ccea9ada40 100644 --- a/drivers/usb/otg/ab8500-usb.c +++ b/drivers/usb/otg/ab8500-usb.c @@ -212,7 +212,7 @@ static int ab8500_usb_link_status_update(struct ab8500_usb *ab) break; } - blocking_notifier_call_chain(&ab->otg.notifier, event, v); + atomic_notifier_call_chain(&ab->otg.notifier, event, v); return 0; } @@ -281,7 +281,7 @@ static int ab8500_usb_set_power(struct otg_transceiver *otg, unsigned mA) ab->vbus_draw = mA; if (mA) - blocking_notifier_call_chain(&ab->otg.notifier, + atomic_notifier_call_chain(&ab->otg.notifier, USB_EVENT_ENUMERATED, ab->otg.gadget); return 0; } @@ -500,7 +500,7 @@ static int __devinit ab8500_usb_probe(struct platform_device *pdev) platform_set_drvdata(pdev, ab); - BLOCKING_INIT_NOTIFIER_HEAD(&ab->otg.notifier); + ATOMIC_INIT_NOTIFIER_HEAD(&ab->otg.notifier); /* v1: Wait for link status to become stable. * all: Updates form set_host and set_peripheral as they are atomic. diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c index 9fea48264fa2..7f9b8cd4514b 100644 --- a/drivers/usb/otg/langwell_otg.c +++ b/drivers/usb/otg/langwell_otg.c @@ -174,50 +174,24 @@ static int langwell_otg_set_power(struct otg_transceiver *otg, return 0; } -/* A-device drives vbus, controlled through PMIC CHRGCNTL register*/ +/* A-device drives vbus, controlled through IPC commands */ static int langwell_otg_set_vbus(struct otg_transceiver *otg, bool enabled) { struct langwell_otg *lnw = the_transceiver; - u8 r; + u8 sub_id; dev_dbg(lnw->dev, "%s <--- %s\n", __func__, enabled ? "on" : "off"); - /* FIXME: surely we should cache this on the first read. If not use - readv to avoid two transactions */ - if (intel_scu_ipc_ioread8(0x00, &r) < 0) { - dev_dbg(lnw->dev, "Failed to read PMIC register 0xD2"); - return -EBUSY; - } - if ((r & 0x03) != 0x02) { - dev_dbg(lnw->dev, "not NEC PMIC attached\n"); - return -EBUSY; - } - - if (intel_scu_ipc_ioread8(0x20, &r) < 0) { - dev_dbg(lnw->dev, "Failed to read PMIC register 0xD2"); - return -EBUSY; - } - - if ((r & 0x20) == 0) { - dev_dbg(lnw->dev, "no battery attached\n"); - return -EBUSY; - } + if (enabled) + sub_id = 0x8; /* Turn on the VBus */ + else + sub_id = 0x9; /* Turn off the VBus */ - /* Workaround for battery attachment issue */ - if (r == 0x34) { - dev_dbg(lnw->dev, "no battery attached on SH\n"); + if (intel_scu_ipc_simple_command(0xef, sub_id)) { + dev_dbg(lnw->dev, "Failed to set Vbus via IPC commands\n"); return -EBUSY; } - dev_dbg(lnw->dev, "battery attached. 2 reg = %x\n", r); - - /* workaround: FW detect writing 0x20/0xc0 to d4 event. - * this is only for NEC PMIC. - */ - - if (intel_scu_ipc_iowrite8(0xD4, enabled ? 0x20 : 0xC0)) - dev_dbg(lnw->dev, "Failed to write PMIC.\n"); - dev_dbg(lnw->dev, "%s --->\n", __func__); return 0; @@ -394,14 +368,14 @@ static void langwell_otg_phy_low_power(int on) dev_dbg(lnw->dev, "%s <--- done\n", __func__); } -/* After drv vbus, add 2 ms delay to set PHCD */ +/* After drv vbus, add 5 ms delay to set PHCD */ static void langwell_otg_phy_low_power_wait(int on) { struct langwell_otg *lnw = the_transceiver; - dev_dbg(lnw->dev, "add 2ms delay before programing PHCD\n"); + dev_dbg(lnw->dev, "add 5ms delay before programing PHCD\n"); - mdelay(2); + mdelay(5); langwell_otg_phy_low_power(on); } diff --git a/drivers/usb/otg/msm72k_otg.c b/drivers/usb/otg/msm_otg.c index 1cd52edcd0c2..296598628b85 100644 --- a/drivers/usb/otg/msm72k_otg.c +++ b/drivers/usb/otg/msm_otg.c @@ -253,6 +253,9 @@ static int msm_otg_reset(struct otg_transceiver *otg) } #define PHY_SUSPEND_TIMEOUT_USEC (500 * 1000) +#define PHY_RESUME_TIMEOUT_USEC (100 * 1000) + +#ifdef CONFIG_PM_SLEEP static int msm_otg_suspend(struct msm_otg *motg) { struct otg_transceiver *otg = &motg->otg; @@ -334,7 +337,6 @@ static int msm_otg_suspend(struct msm_otg *motg) return 0; } -#define PHY_RESUME_TIMEOUT_USEC (100 * 1000) static int msm_otg_resume(struct msm_otg *motg) { struct otg_transceiver *otg = &motg->otg; @@ -399,6 +401,7 @@ skip_phy_resume: return 0; } +#endif static void msm_otg_start_host(struct otg_transceiver *otg, int on) { @@ -720,7 +723,8 @@ static int msm_otg_mode_open(struct inode *inode, struct file *file) static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf, size_t count, loff_t *ppos) { - struct msm_otg *motg = file->private_data; + struct seq_file *s = file->private_data; + struct msm_otg *motg = s->private; char buf[16]; struct otg_transceiver *otg = &motg->otg; int status = count; @@ -972,7 +976,7 @@ static int __devexit msm_otg_remove(struct platform_device *pdev) msm_otg_debugfs_cleanup(); cancel_work_sync(&motg->sm_work); - msm_otg_resume(motg); + pm_runtime_resume(&pdev->dev); device_init_wakeup(&pdev->dev, 0); pm_runtime_disable(&pdev->dev); @@ -1050,13 +1054,9 @@ static int msm_otg_runtime_resume(struct device *dev) dev_dbg(dev, "OTG runtime resume\n"); return msm_otg_resume(motg); } -#else -#define msm_otg_runtime_idle NULL -#define msm_otg_runtime_suspend NULL -#define msm_otg_runtime_resume NULL #endif -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int msm_otg_pm_suspend(struct device *dev) { struct msm_otg *motg = dev_get_drvdata(dev); @@ -1086,25 +1086,24 @@ static int msm_otg_pm_resume(struct device *dev) return 0; } -#else -#define msm_otg_pm_suspend NULL -#define msm_otg_pm_resume NULL #endif +#ifdef CONFIG_PM static const struct dev_pm_ops msm_otg_dev_pm_ops = { - .runtime_suspend = msm_otg_runtime_suspend, - .runtime_resume = msm_otg_runtime_resume, - .runtime_idle = msm_otg_runtime_idle, - .suspend = msm_otg_pm_suspend, - .resume = msm_otg_pm_resume, + SET_SYSTEM_SLEEP_PM_OPS(msm_otg_pm_suspend, msm_otg_pm_resume) + SET_RUNTIME_PM_OPS(msm_otg_runtime_suspend, msm_otg_runtime_resume, + msm_otg_runtime_idle) }; +#endif static struct platform_driver msm_otg_driver = { .remove = __devexit_p(msm_otg_remove), .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, +#ifdef CONFIG_PM .pm = &msm_otg_dev_pm_ops, +#endif }, }; diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c index 8acf165fe13b..c1e360046435 100644 --- a/drivers/usb/otg/nop-usb-xceiv.c +++ b/drivers/usb/otg/nop-usb-xceiv.c @@ -132,7 +132,7 @@ static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev) platform_set_drvdata(pdev, nop); - BLOCKING_INIT_NOTIFIER_HEAD(&nop->otg.notifier); + ATOMIC_INIT_NOTIFIER_HEAD(&nop->otg.notifier); return 0; exit: diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c index 6ca505f333e4..e01b073cc489 100644 --- a/drivers/usb/otg/twl4030-usb.c +++ b/drivers/usb/otg/twl4030-usb.c @@ -275,6 +275,8 @@ static enum usb_xceiv_events twl4030_usb_linkstat(struct twl4030_usb *twl) dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n", status, status, linkstat); + twl->otg.last_event = linkstat; + /* REVISIT this assumes host and peripheral controllers * are registered, and that both are active... */ @@ -512,7 +514,7 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) else twl4030_phy_resume(twl); - blocking_notifier_call_chain(&twl->otg.notifier, status, + atomic_notifier_call_chain(&twl->otg.notifier, status, twl->otg.gadget); } sysfs_notify(&twl->dev->kobj, NULL, "vbus"); @@ -534,7 +536,7 @@ static void twl4030_usb_phy_init(struct twl4030_usb *twl) twl->asleep = 0; } - blocking_notifier_call_chain(&twl->otg.notifier, status, + atomic_notifier_call_chain(&twl->otg.notifier, status, twl->otg.gadget); } sysfs_notify(&twl->dev->kobj, NULL, "vbus"); @@ -623,7 +625,7 @@ static int __devinit twl4030_usb_probe(struct platform_device *pdev) if (device_create_file(&pdev->dev, &dev_attr_vbus)) dev_warn(&pdev->dev, "could not create sysfs file\n"); - BLOCKING_INIT_NOTIFIER_HEAD(&twl->otg.notifier); + ATOMIC_INIT_NOTIFIER_HEAD(&twl->otg.notifier); /* Our job is to use irqs and status from the power module * to keep the transceiver disabled when nothing's connected. diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c index 28f770103640..8a91b4b832a1 100644 --- a/drivers/usb/otg/twl6030-usb.c +++ b/drivers/usb/otg/twl6030-usb.c @@ -149,7 +149,6 @@ static int twl6030_set_phy_clk(struct otg_transceiver *x, int on) static int twl6030_phy_init(struct otg_transceiver *x) { - u8 hw_state; struct twl6030_usb *twl; struct device *dev; struct twl4030_usb_data *pdata; @@ -158,11 +157,7 @@ static int twl6030_phy_init(struct otg_transceiver *x) dev = twl->dev; pdata = dev->platform_data; - regulator_enable(twl->usb3v3); - - hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS); - - if (hw_state & STS_USB_ID) + if (twl->linkstat == USB_EVENT_ID) pdata->phy_power(twl->dev, 1, 1); else pdata->phy_power(twl->dev, 0, 1); @@ -180,7 +175,17 @@ static void twl6030_phy_shutdown(struct otg_transceiver *x) dev = twl->dev; pdata = dev->platform_data; pdata->phy_power(twl->dev, 0, 0); - regulator_disable(twl->usb3v3); +} + +static int twl6030_phy_suspend(struct otg_transceiver *x, int suspend) +{ + struct twl6030_usb *twl = xceiv_to_twl(x); + struct device *dev = twl->dev; + struct twl4030_usb_data *pdata = dev->platform_data; + + pdata->phy_suspend(dev, suspend); + + return 0; } static int twl6030_usb_ldo_init(struct twl6030_usb *twl) @@ -199,16 +204,6 @@ static int twl6030_usb_ldo_init(struct twl6030_usb *twl) if (IS_ERR(twl->usb3v3)) return -ENODEV; - regulator_enable(twl->usb3v3); - - /* Program the VUSB_CFG_TRANS for ACTIVE state. */ - twl6030_writeb(twl, TWL_MODULE_PM_RECEIVER, 0x3F, - VUSB_CFG_TRANS); - - /* Program the VUSB_CFG_STATE register to ON on all groups. */ - twl6030_writeb(twl, TWL_MODULE_PM_RECEIVER, 0xE1, - VUSB_CFG_STATE); - /* Program the USB_VBUS_CTRL_SET and set VBUS_ACT_COMP bit */ twl6030_writeb(twl, TWL_MODULE_USB, 0x4, USB_VBUS_CTRL_SET); @@ -261,16 +256,25 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl) CONTROLLER_STAT1); if (!(hw_state & STS_USB_ID)) { if (vbus_state & VBUS_DET) { + regulator_enable(twl->usb3v3); + twl->asleep = 1; status = USB_EVENT_VBUS; twl->otg.default_a = false; twl->otg.state = OTG_STATE_B_IDLE; + twl->linkstat = status; + twl->otg.last_event = status; + atomic_notifier_call_chain(&twl->otg.notifier, + status, twl->otg.gadget); } else { status = USB_EVENT_NONE; - } - if (status >= 0) { twl->linkstat = status; - blocking_notifier_call_chain(&twl->otg.notifier, + twl->otg.last_event = status; + atomic_notifier_call_chain(&twl->otg.notifier, status, twl->otg.gadget); + if (twl->asleep) { + regulator_disable(twl->usb3v3); + twl->asleep = 0; + } } } sysfs_notify(&twl->dev->kobj, NULL, "vbus"); @@ -288,13 +292,17 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl) if (hw_state & STS_USB_ID) { + regulator_enable(twl->usb3v3); + twl->asleep = 1; twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, 0x1); twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_SET, 0x10); status = USB_EVENT_ID; twl->otg.default_a = true; twl->otg.state = OTG_STATE_A_IDLE; - blocking_notifier_call_chain(&twl->otg.notifier, status, + twl->linkstat = status; + twl->otg.last_event = status; + atomic_notifier_call_chain(&twl->otg.notifier, status, twl->otg.gadget); } else { twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_EN_HI_CLR, @@ -303,7 +311,6 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl) 0x1); } twl6030_writeb(twl, TWL_MODULE_USB, USB_ID_INT_LATCH_CLR, status); - twl->linkstat = status; return IRQ_HANDLED; } @@ -395,6 +402,7 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev) twl->otg.set_vbus = twl6030_set_vbus; twl->otg.init = twl6030_phy_init; twl->otg.shutdown = twl6030_phy_shutdown; + twl->otg.set_suspend = twl6030_phy_suspend; /* init spinlock for workqueue */ spin_lock_init(&twl->lock); @@ -411,7 +419,7 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev) if (device_create_file(&pdev->dev, &dev_attr_vbus)) dev_warn(&pdev->dev, "could not create sysfs file\n"); - BLOCKING_INIT_NOTIFIER_HEAD(&twl->otg.notifier); + ATOMIC_INIT_NOTIFIER_HEAD(&twl->otg.notifier); twl->irq_enabled = true; status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq, @@ -437,7 +445,9 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev) return status; } + twl->asleep = 0; pdata->phy_init(dev); + twl6030_phy_suspend(&twl->otg, 0); twl6030_enable_irq(&twl->otg); dev_info(&pdev->dev, "Initialized TWL6030 USB module\n"); diff --git a/drivers/usb/otg/ulpi_viewport.c b/drivers/usb/otg/ulpi_viewport.c new file mode 100644 index 000000000000..e9a37f90994f --- /dev/null +++ b/drivers/usb/otg/ulpi_viewport.c @@ -0,0 +1,80 @@ +/* + * Copyright (C) 2011 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/usb.h> +#include <linux/io.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> + +#define ULPI_VIEW_WAKEUP (1 << 31) +#define ULPI_VIEW_RUN (1 << 30) +#define ULPI_VIEW_WRITE (1 << 29) +#define ULPI_VIEW_READ (0 << 29) +#define ULPI_VIEW_ADDR(x) (((x) & 0xff) << 16) +#define ULPI_VIEW_DATA_READ(x) (((x) >> 8) & 0xff) +#define ULPI_VIEW_DATA_WRITE(x) ((x) & 0xff) + +static int ulpi_viewport_wait(void __iomem *view, u32 mask) +{ + unsigned long usec = 2000; + + while (usec--) { + if (!(readl(view) & mask)) + return 0; + + udelay(1); + }; + + return -ETIMEDOUT; +} + +static int ulpi_viewport_read(struct otg_transceiver *otg, u32 reg) +{ + int ret; + void __iomem *view = otg->io_priv; + + writel(ULPI_VIEW_WAKEUP | ULPI_VIEW_WRITE, view); + ret = ulpi_viewport_wait(view, ULPI_VIEW_WAKEUP); + if (ret) + return ret; + + writel(ULPI_VIEW_RUN | ULPI_VIEW_READ | ULPI_VIEW_ADDR(reg), view); + ret = ulpi_viewport_wait(view, ULPI_VIEW_RUN); + if (ret) + return ret; + + return ULPI_VIEW_DATA_READ(readl(view)); +} + +static int ulpi_viewport_write(struct otg_transceiver *otg, u32 val, u32 reg) +{ + int ret; + void __iomem *view = otg->io_priv; + + writel(ULPI_VIEW_WAKEUP | ULPI_VIEW_WRITE, view); + ret = ulpi_viewport_wait(view, ULPI_VIEW_WAKEUP); + if (ret) + return ret; + + writel(ULPI_VIEW_RUN | ULPI_VIEW_WRITE | ULPI_VIEW_DATA_WRITE(val) | + ULPI_VIEW_ADDR(reg), view); + + return ulpi_viewport_wait(view, ULPI_VIEW_RUN); +} + +struct otg_io_access_ops ulpi_viewport_access_ops = { + .read = ulpi_viewport_read, + .write = ulpi_viewport_write, +}; diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 7b8815ddf368..14ac87ee9251 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -75,6 +75,7 @@ static int debug; static const struct usb_device_id id_table[] = { { USB_DEVICE(0x4348, 0x5523) }, { USB_DEVICE(0x1a86, 0x7523) }, + { USB_DEVICE(0x1a86, 0x5523) }, { }, }; MODULE_DEVICE_TABLE(usb, id_table); diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index f349a3629d00..a75f9298d88f 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -722,6 +722,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) }, { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID), @@ -973,7 +975,7 @@ static __u32 ftdi_2232h_baud_base_to_divisor(int baud, int base) int divisor3; /* hi-speed baud rate is 10-bit sampling instead of 16-bit */ - divisor3 = (base / 10 / baud) * 8; + divisor3 = base * 8 / (baud * 10); divisor = divisor3 >> 3; divisor |= (__u32)divfrac[divisor3 & 0x7] << 14; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 117e8e6f93c6..c543e55bafba 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -730,6 +730,7 @@ /* Olimex */ #define OLIMEX_VID 0x15BA #define OLIMEX_ARM_USB_OCD_PID 0x0003 +#define OLIMEX_ARM_USB_OCD_H_PID 0x002b /* * Telldus Technologies diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 3b246d93cf22..76e3e502c23d 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -2343,7 +2343,6 @@ static int write_cmd_usb(struct edgeport_port *edge_port, usb_get_serial_data(edge_port->port->serial); int status = 0; struct urb *urb; - int timeout; usb_serial_debug_data(debug, &edge_port->port->dev, __func__, length, buffer); @@ -2376,8 +2375,6 @@ static int write_cmd_usb(struct edgeport_port *edge_port, return status; } - /* wait for command to finish */ - timeout = COMMAND_TIMEOUT; #if 0 wait_event(&edge_port->wait_command, !edge_port->commandPending); diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 0791778a66f3..67f41b526570 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -2121,16 +2121,16 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, /* Work out which port within the device is being setup */ device_port = port->number - port->serial->minor; - dbg("%s - endpoint %d port %d (%d)", - __func__, usb_pipeendpoint(this_urb->pipe), - port->number, device_port); - - /* Make sure we have an urb then send the message */ + /* Make sure we have an urb then send the message */ if (this_urb == NULL) { dbg("%s - oops no urb for port %d.", __func__, port->number); return -1; } + dbg("%s - endpoint %d port %d (%d)", + __func__, usb_pipeendpoint(this_urb->pipe), + port->number, device_port); + /* Save reset port val for resend. Don't overwrite resend for open/close condition. */ if ((reset_port + 1) > p_priv->resend_cont) diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 554a8693a463..7b690f3282a2 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -173,7 +173,8 @@ static void keyspan_pda_wakeup_write(struct work_struct *work) container_of(work, struct keyspan_pda_private, wakeup_work); struct usb_serial_port *port = priv->port; struct tty_struct *tty = tty_port_tty_get(&port->port); - tty_wakeup(tty); + if (tty) + tty_wakeup(tty); tty_kref_put(tty); } @@ -206,7 +207,7 @@ static void keyspan_pda_request_unthrottle(struct work_struct *work) static void keyspan_pda_rx_interrupt(struct urb *urb) { struct usb_serial_port *port = urb->context; - struct tty_struct *tty = tty_port_tty_get(&port->port); + struct tty_struct *tty; unsigned char *data = urb->transfer_buffer; int retval; int status = urb->status; @@ -223,7 +224,7 @@ static void keyspan_pda_rx_interrupt(struct urb *urb) /* this urb is terminated, clean up */ dbg("%s - urb shutting down with status: %d", __func__, status); - goto out; + return; default: dbg("%s - nonzero urb status received: %d", __func__, status); @@ -233,12 +234,14 @@ static void keyspan_pda_rx_interrupt(struct urb *urb) /* see if the message is data or a status interrupt */ switch (data[0]) { case 0: - /* rest of message is rx data */ - if (urb->actual_length) { + tty = tty_port_tty_get(&port->port); + /* rest of message is rx data */ + if (tty && urb->actual_length) { tty_insert_flip_string(tty, data + 1, urb->actual_length - 1); tty_flip_buffer_push(tty); } + tty_kref_put(tty); break; case 1: /* status interrupt */ @@ -265,8 +268,6 @@ exit: dev_err(&port->dev, "%s - usb_submit_urb failed with result %d", __func__, retval); -out: - tty_kref_put(tty); } diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index bd5bd8589e04..b382d9a0274d 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -372,7 +372,7 @@ static void kobil_read_int_callback(struct urb *urb) } tty = tty_port_tty_get(&port->port); - if (urb->actual_length) { + if (tty && urb->actual_length) { /* BEGIN DEBUG */ /* diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c index 2849f8c32015..1e225aacf46e 100644 --- a/drivers/usb/serial/mct_u232.c +++ b/drivers/usb/serial/mct_u232.c @@ -78,6 +78,8 @@ #include <asm/unaligned.h> #include <linux/usb.h> #include <linux/usb/serial.h> +#include <linux/serial.h> +#include <linux/ioctl.h> #include "mct_u232.h" /* @@ -104,6 +106,10 @@ static void mct_u232_break_ctl(struct tty_struct *tty, int break_state); static int mct_u232_tiocmget(struct tty_struct *tty, struct file *file); static int mct_u232_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); +static int mct_u232_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg); +static int mct_u232_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount); static void mct_u232_throttle(struct tty_struct *tty); static void mct_u232_unthrottle(struct tty_struct *tty); @@ -150,9 +156,10 @@ static struct usb_serial_driver mct_u232_device = { .tiocmset = mct_u232_tiocmset, .attach = mct_u232_startup, .release = mct_u232_release, + .ioctl = mct_u232_ioctl, + .get_icount = mct_u232_get_icount, }; - struct mct_u232_private { spinlock_t lock; unsigned int control_state; /* Modem Line Setting (TIOCM) */ @@ -160,6 +167,9 @@ struct mct_u232_private { unsigned char last_lsr; /* Line Status Register */ unsigned char last_msr; /* Modem Status Register */ unsigned int rx_flags; /* Throttling flags */ + struct async_icount icount; + wait_queue_head_t msr_wait; /* for handling sleeping while waiting + for msr change to happen */ }; #define THROTTLED 0x01 @@ -386,6 +396,20 @@ static int mct_u232_get_modem_stat(struct usb_serial *serial, return rc; } /* mct_u232_get_modem_stat */ +static void mct_u232_msr_to_icount(struct async_icount *icount, + unsigned char msr) +{ + /* Translate Control Line states */ + if (msr & MCT_U232_MSR_DDSR) + icount->dsr++; + if (msr & MCT_U232_MSR_DCTS) + icount->cts++; + if (msr & MCT_U232_MSR_DRI) + icount->rng++; + if (msr & MCT_U232_MSR_DCD) + icount->dcd++; +} /* mct_u232_msr_to_icount */ + static void mct_u232_msr_to_state(unsigned int *control_state, unsigned char msr) { @@ -422,6 +446,7 @@ static int mct_u232_startup(struct usb_serial *serial) if (!priv) return -ENOMEM; spin_lock_init(&priv->lock); + init_waitqueue_head(&priv->msr_wait); usb_set_serial_port_data(serial->port[0], priv); init_waitqueue_head(&serial->port[0]->write_wait); @@ -621,6 +646,8 @@ static void mct_u232_read_int_callback(struct urb *urb) /* Record Control Line states */ mct_u232_msr_to_state(&priv->control_state, priv->last_msr); + mct_u232_msr_to_icount(&priv->icount, priv->last_msr); + #if 0 /* Not yet handled. See belkin_sa.c for further information */ /* Now to report any errors */ @@ -647,6 +674,7 @@ static void mct_u232_read_int_callback(struct urb *urb) tty_kref_put(tty); } #endif + wake_up_interruptible(&priv->msr_wait); spin_unlock_irqrestore(&priv->lock, flags); exit: retval = usb_submit_urb(urb, GFP_ATOMIC); @@ -826,7 +854,6 @@ static void mct_u232_throttle(struct tty_struct *tty) } } - static void mct_u232_unthrottle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; @@ -847,6 +874,82 @@ static void mct_u232_unthrottle(struct tty_struct *tty) } } +static int mct_u232_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + DEFINE_WAIT(wait); + struct usb_serial_port *port = tty->driver_data; + struct mct_u232_private *mct_u232_port = usb_get_serial_port_data(port); + struct async_icount cnow, cprev; + unsigned long flags; + + dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); + + switch (cmd) { + + case TIOCMIWAIT: + + dbg("%s (%d) TIOCMIWAIT", __func__, port->number); + + spin_lock_irqsave(&mct_u232_port->lock, flags); + cprev = mct_u232_port->icount; + spin_unlock_irqrestore(&mct_u232_port->lock, flags); + for ( ; ; ) { + prepare_to_wait(&mct_u232_port->msr_wait, + &wait, TASK_INTERRUPTIBLE); + schedule(); + finish_wait(&mct_u232_port->msr_wait, &wait); + /* see if a signal did it */ + if (signal_pending(current)) + return -ERESTARTSYS; + spin_lock_irqsave(&mct_u232_port->lock, flags); + cnow = mct_u232_port->icount; + spin_unlock_irqrestore(&mct_u232_port->lock, flags); + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) + return -EIO; /* no change => error */ + if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) { + return 0; + } + cprev = cnow; + } + + } + return -ENOIOCTLCMD; +} + +static int mct_u232_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) +{ + struct usb_serial_port *port = tty->driver_data; + struct mct_u232_private *mct_u232_port = usb_get_serial_port_data(port); + struct async_icount *ic = &mct_u232_port->icount; + unsigned long flags; + + spin_lock_irqsave(&mct_u232_port->lock, flags); + + icount->cts = ic->cts; + icount->dsr = ic->dsr; + icount->rng = ic->rng; + icount->dcd = ic->dcd; + icount->rx = ic->rx; + icount->tx = ic->tx; + icount->frame = ic->frame; + icount->overrun = ic->overrun; + icount->parity = ic->parity; + icount->brk = ic->brk; + icount->buf_overrun = ic->buf_overrun; + + spin_unlock_irqrestore(&mct_u232_port->lock, flags); + + dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", + __func__, port->number, icount->rx, icount->tx); + return 0; +} + static int __init mct_u232_init(void) { int retval; diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 7d3bc9a3e2b6..ae506f4ee29d 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -2052,7 +2052,7 @@ static int mos7720_startup(struct usb_serial *serial) struct usb_device *dev; int i; char data; - u16 product = le16_to_cpu(serial->dev->descriptor.idProduct); + u16 product; int ret_val; dbg("%s: Entering ..........", __func__); @@ -2062,6 +2062,7 @@ static int mos7720_startup(struct usb_serial *serial) return -ENODEV; } + product = le16_to_cpu(serial->dev->descriptor.idProduct); dev = serial->dev; /* diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index eda1f9266c4e..ce82396fc4e8 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -1,6 +1,7 @@ /* * Opticon USB barcode to serial driver * + * Copyright (C) 2011 Martin Jansen <martin.jansen@opticon.com> * Copyright (C) 2008 - 2009 Greg Kroah-Hartman <gregkh@suse.de> * Copyright (C) 2008 - 2009 Novell Inc. * @@ -21,6 +22,16 @@ #include <linux/usb/serial.h> #include <linux/uaccess.h> +#define CONTROL_RTS 0x02 +#define RESEND_CTS_STATE 0x03 + +/* max number of write urbs in flight */ +#define URB_UPPER_LIMIT 8 + +/* This driver works for the Opticon 1D barcode reader + * an examples of 1D barcode types are EAN, UPC, Code39, IATA etc.. */ +#define DRIVER_DESC "Opticon USB barcode to serial driver (1D)" + static int debug; static const struct usb_device_id id_table[] = { @@ -42,13 +53,13 @@ struct opticon_private { bool throttled; bool actually_throttled; bool rts; + bool cts; int outstanding_urbs; }; -/* max number of write urbs in flight */ -#define URB_UPPER_LIMIT 4 -static void opticon_bulk_callback(struct urb *urb) + +static void opticon_read_bulk_callback(struct urb *urb) { struct opticon_private *priv = urb->context; unsigned char *data = urb->transfer_buffer; @@ -57,6 +68,7 @@ static void opticon_bulk_callback(struct urb *urb) struct tty_struct *tty; int result; int data_length; + unsigned long flags; dbg("%s - port %d", __func__, port->number); @@ -87,10 +99,10 @@ static void opticon_bulk_callback(struct urb *urb) * Data from the device comes with a 2 byte header: * * <0x00><0x00>data... - * This is real data to be sent to the tty layer + * This is real data to be sent to the tty layer * <0x00><0x01)level - * This is a RTS level change, the third byte is the RTS - * value (0 for low, 1 for high). + * This is a CTS level change, the third byte is the CTS + * value (0 for low, 1 for high). */ if ((data[0] == 0x00) && (data[1] == 0x00)) { /* real data, send it to the tty layer */ @@ -103,10 +115,13 @@ static void opticon_bulk_callback(struct urb *urb) } } else { if ((data[0] == 0x00) && (data[1] == 0x01)) { + spin_lock_irqsave(&priv->lock, flags); + /* CTS status infomation package */ if (data[2] == 0x00) - priv->rts = false; + priv->cts = false; else - priv->rts = true; + priv->cts = true; + spin_unlock_irqrestore(&priv->lock, flags); } else { dev_dbg(&priv->udev->dev, "Unknown data packet received from the device:" @@ -129,7 +144,7 @@ exit: usb_rcvbulkpipe(priv->udev, priv->bulk_address), priv->bulk_in_buffer, priv->buffer_size, - opticon_bulk_callback, priv); + opticon_read_bulk_callback, priv); result = usb_submit_urb(priv->bulk_read_urb, GFP_ATOMIC); if (result) dev_err(&port->dev, @@ -140,6 +155,24 @@ exit: spin_unlock(&priv->lock); } +static int send_control_msg(struct usb_serial_port *port, u8 requesttype, + u8 val) +{ + struct usb_serial *serial = port->serial; + int retval; + u8 buffer[2]; + + buffer[0] = val; + /* Send the message to the vendor control endpoint + * of the connected device */ + retval = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + requesttype, + USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE, + 0, 0, buffer, 1, 0); + + return retval; +} + static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port) { struct opticon_private *priv = usb_get_serial_data(port->serial); @@ -152,19 +185,30 @@ static int opticon_open(struct tty_struct *tty, struct usb_serial_port *port) priv->throttled = false; priv->actually_throttled = false; priv->port = port; + priv->rts = false; spin_unlock_irqrestore(&priv->lock, flags); - /* Start reading from the device */ + /* Clear RTS line */ + send_control_msg(port, CONTROL_RTS, 0); + + /* Setup the read URB and start reading from the device */ usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev, usb_rcvbulkpipe(priv->udev, priv->bulk_address), priv->bulk_in_buffer, priv->buffer_size, - opticon_bulk_callback, priv); + opticon_read_bulk_callback, priv); + + /* clear the halt status of the enpoint */ + usb_clear_halt(priv->udev, priv->bulk_read_urb->pipe); + result = usb_submit_urb(priv->bulk_read_urb, GFP_KERNEL); if (result) dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result); + /* Request CTS line state, sometimes during opening the current + * CTS state can be missed. */ + send_control_msg(port, RESEND_CTS_STATE, 1); return result; } @@ -178,7 +222,7 @@ static void opticon_close(struct usb_serial_port *port) usb_kill_urb(priv->bulk_read_urb); } -static void opticon_write_bulk_callback(struct urb *urb) +static void opticon_write_control_callback(struct urb *urb) { struct opticon_private *priv = urb->context; int status = urb->status; @@ -210,6 +254,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, unsigned char *buffer; unsigned long flags; int status; + struct usb_ctrlrequest *dr; dbg("%s - port %d", __func__, port->number); @@ -226,6 +271,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, if (!buffer) { dev_err(&port->dev, "out of memory\n"); count = -ENOMEM; + goto error_no_buffer; } @@ -240,35 +286,28 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, usb_serial_debug_data(debug, &port->dev, __func__, count, buffer); - if (port->bulk_out_endpointAddress) { - usb_fill_bulk_urb(urb, serial->dev, - usb_sndbulkpipe(serial->dev, - port->bulk_out_endpointAddress), - buffer, count, opticon_write_bulk_callback, priv); - } else { - struct usb_ctrlrequest *dr; - - dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO); - if (!dr) - return -ENOMEM; - - dr->bRequestType = USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT; - dr->bRequest = 0x01; - dr->wValue = 0; - dr->wIndex = 0; - dr->wLength = cpu_to_le16(count); - - usb_fill_control_urb(urb, serial->dev, - usb_sndctrlpipe(serial->dev, 0), - (unsigned char *)dr, buffer, count, - opticon_write_bulk_callback, priv); - } + /* The conncected devices do not have a bulk write endpoint, + * to transmit data to de barcode device the control endpoint is used */ + dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO); + if (!dr) + return -ENOMEM; + + dr->bRequestType = USB_TYPE_VENDOR | USB_RECIP_INTERFACE | USB_DIR_OUT; + dr->bRequest = 0x01; + dr->wValue = 0; + dr->wIndex = 0; + dr->wLength = cpu_to_le16(count); + + usb_fill_control_urb(urb, serial->dev, + usb_sndctrlpipe(serial->dev, 0), + (unsigned char *)dr, buffer, count, + opticon_write_control_callback, priv); /* send it down the pipe */ status = usb_submit_urb(urb, GFP_ATOMIC); if (status) { dev_err(&port->dev, - "%s - usb_submit_urb(write bulk) failed with status = %d\n", + "%s - usb_submit_urb(write endpoint) failed status = %d\n", __func__, status); count = status; goto error; @@ -360,16 +399,49 @@ static int opticon_tiocmget(struct tty_struct *tty, struct file *file) int result = 0; dbg("%s - port %d", __func__, port->number); + if (!usb_get_intfdata(port->serial->interface)) + return -ENODEV; spin_lock_irqsave(&priv->lock, flags); if (priv->rts) - result = TIOCM_RTS; + result |= TIOCM_RTS; + if (priv->cts) + result |= TIOCM_CTS; spin_unlock_irqrestore(&priv->lock, flags); dbg("%s - %x", __func__, result); return result; } +static int opticon_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct opticon_private *priv = usb_get_serial_data(port->serial); + unsigned long flags; + bool rts; + bool changed = false; + + if (!usb_get_intfdata(port->serial->interface)) + return -ENODEV; + /* We only support RTS so we only handle that */ + spin_lock_irqsave(&priv->lock, flags); + + rts = priv->rts; + if (set & TIOCM_RTS) + priv->rts = true; + if (clear & TIOCM_RTS) + priv->rts = false; + changed = rts ^ priv->rts; + spin_unlock_irqrestore(&priv->lock, flags); + + if (!changed) + return 0; + + /* Send the new RTS state to the connected device */ + return send_control_msg(port, CONTROL_RTS, !rts); +} + static int get_serial_info(struct opticon_private *priv, struct serial_struct __user *serial) { @@ -431,6 +503,7 @@ static int opticon_startup(struct usb_serial *serial) priv->serial = serial; priv->port = serial->port[0]; priv->udev = serial->dev; + priv->outstanding_urbs = 0; /* Init the outstanding urbs */ /* find our bulk endpoint */ intf = serial->interface->altsetting; @@ -456,13 +529,6 @@ static int opticon_startup(struct usb_serial *serial) priv->bulk_address = endpoint->bEndpointAddress; - /* set up our bulk urb */ - usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev, - usb_rcvbulkpipe(priv->udev, - endpoint->bEndpointAddress), - priv->bulk_in_buffer, priv->buffer_size, - opticon_bulk_callback, priv); - bulk_in_found = true; break; } @@ -558,6 +624,7 @@ static struct usb_serial_driver opticon_device = { .unthrottle = opticon_unthrottle, .ioctl = opticon_ioctl, .tiocmget = opticon_tiocmget, + .tiocmset = opticon_tiocmset, }; static int __init opticon_init(void) @@ -581,6 +648,7 @@ static void __exit opticon_exit(void) module_init(opticon_init); module_exit(opticon_exit); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 5f46838dfee5..75c7f456eed5 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -652,7 +652,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626, 0xff, + 0xff, 0xff), .driver_info = (kernel_ulong_t)&four_g_w14_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0032, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0033, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0034, 0xff, 0xff, 0xff) }, diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 0457813eebee..5b88b6836a81 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -376,7 +376,10 @@ static int sierra_send_setup(struct usb_serial_port *port) if (!do_send) return 0; - usb_autopm_get_interface(serial->interface); + retval = usb_autopm_get_interface(serial->interface); + if (retval < 0) + return retval; + retval = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), 0x22, 0x21, val, interface, NULL, 0, USB_CTRL_SET_TIMEOUT); usb_autopm_put_interface(serial->interface); @@ -811,8 +814,12 @@ static void sierra_close(struct usb_serial_port *port) mutex_lock(&serial->disc_mutex); if (!serial->disconnected) { serial->interface->needs_remote_wakeup = 0; - usb_autopm_get_interface(serial->interface); - sierra_send_setup(port); + /* odd error handling due to pm counters */ + if (!usb_autopm_get_interface(serial->interface)) + sierra_send_setup(port); + else + usb_autopm_get_interface_no_resume(serial->interface); + } mutex_unlock(&serial->disc_mutex); spin_lock_irq(&intfdata->susp_lock); @@ -865,7 +872,8 @@ static int sierra_open(struct tty_struct *tty, struct usb_serial_port *port) /* get rid of everything as in close */ sierra_close(port); /* restore balance for autopm */ - usb_autopm_put_interface(serial->interface); + if (!serial->disconnected) + usb_autopm_put_interface(serial->interface); return err; } sierra_send_setup(port); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 546a52179bec..2ff90a9c8f47 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -911,9 +911,8 @@ int usb_serial_probe(struct usb_interface *interface, dev_err(&interface->dev, "No free urbs available\n"); goto probe_error; } - buffer_size = serial->type->bulk_in_size; - if (!buffer_size) - buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); + buffer_size = max_t(int, serial->type->bulk_in_size, + le16_to_cpu(endpoint->wMaxPacketSize)); port->bulk_in_size = buffer_size; port->bulk_in_endpointAddress = endpoint->bEndpointAddress; port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 9c014e2ecd68..eb95aecc0015 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -261,7 +261,8 @@ int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port, intfdata->in_flight--; spin_unlock_irqrestore(&intfdata->susp_lock, flags); - continue; + usb_autopm_put_interface_async(port->serial->interface); + break; } } @@ -308,11 +309,16 @@ static void usb_wwan_indat_callback(struct urb *urb) /* Resubmit urb so we continue receiving */ if (status != -ESHUTDOWN) { err = usb_submit_urb(urb, GFP_ATOMIC); - if (err && err != -EPERM) - printk(KERN_ERR "%s: resubmit read urb failed. " - "(%d)", __func__, err); - else + if (err) { + if (err != -EPERM) { + printk(KERN_ERR "%s: resubmit read urb failed. " + "(%d)", __func__, err); + /* busy also in error unless we are killed */ + usb_mark_last_busy(port->serial->dev); + } + } else { usb_mark_last_busy(port->serial->dev); + } } } @@ -421,6 +427,7 @@ int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port) spin_lock_irq(&intfdata->susp_lock); portdata->opened = 1; spin_unlock_irq(&intfdata->susp_lock); + /* this balances a get in the generic USB serial code */ usb_autopm_put_interface(serial->interface); return 0; @@ -447,7 +454,8 @@ void usb_wwan_close(struct usb_serial_port *port) usb_kill_urb(portdata->in_urbs[i]); for (i = 0; i < N_OUT_URB; i++) usb_kill_urb(portdata->out_urbs[i]); - usb_autopm_get_interface(serial->interface); + /* balancing - important as an error cannot be handled*/ + usb_autopm_get_interface_no_resume(serial->interface); serial->interface->needs_remote_wakeup = 0; } } @@ -661,6 +669,18 @@ int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message) } EXPORT_SYMBOL(usb_wwan_suspend); +static void unbusy_queued_urb(struct urb *urb, struct usb_wwan_port_private *portdata) +{ + int i; + + for (i = 0; i < N_OUT_URB; i++) { + if (urb == portdata->out_urbs[i]) { + clear_bit(i, &portdata->out_busy); + break; + } + } +} + static void play_delayed(struct usb_serial_port *port) { struct usb_wwan_intf_private *data; @@ -672,8 +692,17 @@ static void play_delayed(struct usb_serial_port *port) data = port->serial->private; while ((urb = usb_get_from_anchor(&portdata->delayed))) { err = usb_submit_urb(urb, GFP_ATOMIC); - if (!err) + if (!err) { data->in_flight++; + } else { + /* we have to throw away the rest */ + do { + unbusy_queued_urb(urb, portdata); + //extremely dirty + atomic_dec(&port->serial->interface->dev.power.usage_count); + } while ((urb = usb_get_from_anchor(&portdata->delayed))); + break; + } } } diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 49a489e03716..353aeb44da6a 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -31,6 +31,16 @@ config USB_STORAGE_DEBUG Say Y here in order to have the USB Mass Storage code generate verbose debugging messages. +config USB_STORAGE_REALTEK + tristate "Realtek Card Reader support" + depends on USB_STORAGE + help + Say Y here to include additional code to support the power-saving function + for Realtek RTS51xx USB card readers. + + If this driver is compiled as a module, it will be named ums-realtek. + + config USB_STORAGE_DATAFAB tristate "Datafab Compact Flash Reader support" depends on USB_STORAGE diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index fcf14cdc4a04..0d2de971bd91 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_USB_STORAGE_ISD200) += ums-isd200.o obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += ums-jumpshot.o obj-$(CONFIG_USB_STORAGE_KARMA) += ums-karma.o obj-$(CONFIG_USB_STORAGE_ONETOUCH) += ums-onetouch.o +obj-$(CONFIG_USB_STORAGE_REALTEK) += ums-realtek.o obj-$(CONFIG_USB_STORAGE_SDDR09) += ums-sddr09.o obj-$(CONFIG_USB_STORAGE_SDDR55) += ums-sddr55.o obj-$(CONFIG_USB_STORAGE_USBAT) += ums-usbat.o @@ -42,6 +43,7 @@ ums-isd200-y := isd200.o ums-jumpshot-y := jumpshot.o ums-karma-y := karma.o ums-onetouch-y := onetouch.o +ums-realtek-y := realtek_cr.o ums-sddr09-y := sddr09.o ums-sddr55-y := sddr55.o ums-usbat-y := shuttle_usbat.o diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c new file mode 100644 index 000000000000..d509a4a7d74f --- /dev/null +++ b/drivers/usb/storage/realtek_cr.c @@ -0,0 +1,675 @@ +/* Driver for Realtek RTS51xx USB card reader + * + * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + * Author: + * wwang (wei_wang@realsil.com.cn) + * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China + */ + +#include <linux/module.h> +#include <linux/blkdev.h> +#include <linux/kthread.h> +#include <linux/sched.h> +#include <linux/workqueue.h> +#include <linux/kernel.h> +#include <linux/version.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <linux/cdrom.h> + +#include <linux/usb.h> +#include <linux/slab.h> +#include <linux/usb_usual.h> + +#include "usb.h" +#include "transport.h" +#include "protocol.h" +#include "debug.h" + +MODULE_DESCRIPTION("Driver for Realtek USB Card Reader"); +MODULE_AUTHOR("wwang <wei_wang@realsil.com.cn>"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("1.03"); + +static int auto_delink_en = 1; +module_param(auto_delink_en, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(auto_delink_en, "enable auto delink"); + +struct rts51x_status { + u16 vid; + u16 pid; + u8 cur_lun; + u8 card_type; + u8 total_lun; + u16 fw_ver; + u8 phy_exist; + u8 multi_flag; + u8 multi_card; + u8 log_exist; + union { + u8 detailed_type1; + u8 detailed_type2; + } detailed_type; + u8 function[2]; +}; + +struct rts51x_chip { + u16 vendor_id; + u16 product_id; + char max_lun; + + struct rts51x_status *status; + int status_len; + + u32 flag; +}; + +/* flag definition */ +#define FLIDX_AUTO_DELINK 0x01 + +#define SCSI_LUN(srb) ((srb)->device->lun) + +/* Bit Operation */ +#define SET_BIT(data, idx) ((data) |= 1 << (idx)) +#define CLR_BIT(data, idx) ((data) &= ~(1 << (idx))) +#define CHK_BIT(data, idx) ((data) & (1 << (idx))) + +#define SET_AUTO_DELINK(chip) ((chip)->flag |= FLIDX_AUTO_DELINK) +#define CLR_AUTO_DELINK(chip) ((chip)->flag &= ~FLIDX_AUTO_DELINK) +#define CHK_AUTO_DELINK(chip) ((chip)->flag & FLIDX_AUTO_DELINK) + +#define RTS51X_GET_VID(chip) ((chip)->vendor_id) +#define RTS51X_GET_PID(chip) ((chip)->product_id) + +#define FW_VERSION(chip) ((chip)->status[0].fw_ver) +#define STATUS_LEN(chip) ((chip)->status_len) + +/* Check card reader function */ +#define SUPPORT_DETAILED_TYPE1(chip) \ + CHK_BIT((chip)->status[0].function[0], 1) +#define SUPPORT_OT(chip) \ + CHK_BIT((chip)->status[0].function[0], 2) +#define SUPPORT_OC(chip) \ + CHK_BIT((chip)->status[0].function[0], 3) +#define SUPPORT_AUTO_DELINK(chip) \ + CHK_BIT((chip)->status[0].function[0], 4) +#define SUPPORT_SDIO(chip) \ + CHK_BIT((chip)->status[0].function[1], 0) +#define SUPPORT_DETAILED_TYPE2(chip) \ + CHK_BIT((chip)->status[0].function[1], 1) + +#define CHECK_PID(chip, pid) (RTS51X_GET_PID(chip) == (pid)) +#define CHECK_FW_VER(chip, fw_ver) (FW_VERSION(chip) == (fw_ver)) +#define CHECK_ID(chip, pid, fw_ver) \ + (CHECK_PID((chip), (pid)) && CHECK_FW_VER((chip), (fw_ver))) + +#define wait_timeout_x(task_state, msecs) \ +do { \ + set_current_state((task_state)); \ + schedule_timeout((msecs) * HZ / 1000); \ +} while (0) + +#define wait_timeout(msecs) \ + wait_timeout_x(TASK_INTERRUPTIBLE, (msecs)) + +static int init_realtek_cr(struct us_data *us); + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{\ + USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24)\ +} + +static const struct usb_device_id realtek_cr_ids[] = { +# include "unusual_realtek.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, realtek_cr_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev realtek_cr_unusual_dev_list[] = { +# include "unusual_realtek.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + +static int rts51x_bulk_transport(struct us_data *us, u8 lun, + u8 *cmd, int cmd_len, u8 *buf, int buf_len, + enum dma_data_direction dir, int *act_len) +{ + struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf; + struct bulk_cs_wrap *bcs = (struct bulk_cs_wrap *) us->iobuf; + int result; + unsigned int residue; + unsigned int cswlen; + unsigned int cbwlen = US_BULK_CB_WRAP_LEN; + + /* set up the command wrapper */ + bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN); + bcb->DataTransferLength = cpu_to_le32(buf_len); + bcb->Flags = (dir == DMA_FROM_DEVICE) ? 1 << 7 : 0; + bcb->Tag = ++us->tag; + bcb->Lun = lun; + bcb->Length = cmd_len; + + /* copy the command payload */ + memset(bcb->CDB, 0, sizeof(bcb->CDB)); + memcpy(bcb->CDB, cmd, bcb->Length); + + /* send it to out endpoint */ + result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + bcb, cbwlen, NULL); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + /* DATA STAGE */ + /* send/receive data payload, if there is any */ + + if (buf && buf_len) { + unsigned int pipe = (dir == DMA_FROM_DEVICE) ? + us->recv_bulk_pipe : us->send_bulk_pipe; + result = usb_stor_bulk_transfer_buf(us, pipe, + buf, buf_len, NULL); + if (result == USB_STOR_XFER_ERROR) + return USB_STOR_TRANSPORT_ERROR; + } + + /* get CSW for device status */ + result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + bcs, US_BULK_CS_WRAP_LEN, &cswlen); + if (result != USB_STOR_XFER_GOOD) + return USB_STOR_TRANSPORT_ERROR; + + /* check bulk status */ + if (bcs->Signature != cpu_to_le32(US_BULK_CS_SIGN)) { + US_DEBUGP("Signature mismatch: got %08X, expecting %08X\n", + le32_to_cpu(bcs->Signature), + US_BULK_CS_SIGN); + return USB_STOR_TRANSPORT_ERROR; + } + + residue = bcs->Residue; + if (bcs->Tag != us->tag) + return USB_STOR_TRANSPORT_ERROR; + + /* try to compute the actual residue, based on how much data + * was really transferred and what the device tells us */ + if (residue) + residue = residue < buf_len ? residue : buf_len; + + if (act_len) + *act_len = buf_len - residue; + + /* based on the status code, we report good or bad */ + switch (bcs->Status) { + case US_BULK_STAT_OK: + /* command good -- note that data could be short */ + return USB_STOR_TRANSPORT_GOOD; + + case US_BULK_STAT_FAIL: + /* command failed */ + return USB_STOR_TRANSPORT_FAILED; + + case US_BULK_STAT_PHASE: + /* phase error -- note that a transport reset will be + * invoked by the invoke_transport() function + */ + return USB_STOR_TRANSPORT_ERROR; + } + + /* we should never get here, but if we do, we're in trouble */ + return USB_STOR_TRANSPORT_ERROR; +} + +/* Determine what the maximum LUN supported is */ +static int rts51x_get_max_lun(struct us_data *us) +{ + int result; + + /* issue the command */ + us->iobuf[0] = 0; + result = usb_stor_control_msg(us, us->recv_ctrl_pipe, + US_BULK_GET_MAX_LUN, + USB_DIR_IN | USB_TYPE_CLASS | + USB_RECIP_INTERFACE, + 0, us->ifnum, us->iobuf, 1, 10*HZ); + + US_DEBUGP("GetMaxLUN command result is %d, data is %d\n", + result, us->iobuf[0]); + + /* if we have a successful request, return the result */ + if (result > 0) + return us->iobuf[0]; + + return 0; +} + +static int rts51x_read_mem(struct us_data *us, u16 addr, u8 *data, u16 len) +{ + int retval; + u8 cmnd[12] = {0}; + + US_DEBUGP("%s, addr = 0x%x, len = %d\n", __func__, addr, len); + + cmnd[0] = 0xF0; + cmnd[1] = 0x0D; + cmnd[2] = (u8)(addr >> 8); + cmnd[3] = (u8)addr; + cmnd[4] = (u8)(len >> 8); + cmnd[5] = (u8)len; + + retval = rts51x_bulk_transport(us, 0, cmnd, 12, + data, len, DMA_FROM_DEVICE, NULL); + if (retval != USB_STOR_TRANSPORT_GOOD) + return -EIO; + + return 0; +} + +static int rts51x_write_mem(struct us_data *us, u16 addr, u8 *data, u16 len) +{ + int retval; + u8 cmnd[12] = {0}; + + US_DEBUGP("%s, addr = 0x%x, len = %d\n", __func__, addr, len); + + cmnd[0] = 0xF0; + cmnd[1] = 0x0E; + cmnd[2] = (u8)(addr >> 8); + cmnd[3] = (u8)addr; + cmnd[4] = (u8)(len >> 8); + cmnd[5] = (u8)len; + + retval = rts51x_bulk_transport(us, 0, cmnd, 12, + data, len, DMA_TO_DEVICE, NULL); + if (retval != USB_STOR_TRANSPORT_GOOD) + return -EIO; + + return 0; +} + +static int rts51x_read_status(struct us_data *us, + u8 lun, u8 *status, int len, int *actlen) +{ + int retval; + u8 cmnd[12] = {0}; + + US_DEBUGP("%s, lun = %d\n", __func__, lun); + + cmnd[0] = 0xF0; + cmnd[1] = 0x09; + + retval = rts51x_bulk_transport(us, lun, cmnd, 12, + status, len, DMA_FROM_DEVICE, actlen); + if (retval != USB_STOR_TRANSPORT_GOOD) + return -EIO; + + return 0; +} + +static int rts51x_check_status(struct us_data *us, u8 lun) +{ + struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra); + int retval; + u8 buf[16]; + + retval = rts51x_read_status(us, lun, buf, 16, &(chip->status_len)); + if (retval < 0) + return -EIO; + + US_DEBUGP("chip->status_len = %d\n", chip->status_len); + + chip->status[lun].vid = ((u16)buf[0] << 8) | buf[1]; + chip->status[lun].pid = ((u16)buf[2] << 8) | buf[3]; + chip->status[lun].cur_lun = buf[4]; + chip->status[lun].card_type = buf[5]; + chip->status[lun].total_lun = buf[6]; + chip->status[lun].fw_ver = ((u16)buf[7] << 8) | buf[8]; + chip->status[lun].phy_exist = buf[9]; + chip->status[lun].multi_flag = buf[10]; + chip->status[lun].multi_card = buf[11]; + chip->status[lun].log_exist = buf[12]; + if (chip->status_len == 16) { + chip->status[lun].detailed_type.detailed_type1 = buf[13]; + chip->status[lun].function[0] = buf[14]; + chip->status[lun].function[1] = buf[15]; + } + + return 0; +} + +static int enable_oscillator(struct us_data *us) +{ + int retval; + u8 value; + + retval = rts51x_read_mem(us, 0xFE77, &value, 1); + if (retval < 0) + return -EIO; + + value |= 0x04; + retval = rts51x_write_mem(us, 0xFE77, &value, 1); + if (retval < 0) + return -EIO; + + retval = rts51x_read_mem(us, 0xFE77, &value, 1); + if (retval < 0) + return -EIO; + + if (!(value & 0x04)) + return -EIO; + + return 0; +} + +static int do_config_autodelink(struct us_data *us, int enable, int force) +{ + int retval; + u8 value; + + retval = rts51x_read_mem(us, 0xFE47, &value, 1); + if (retval < 0) + return -EIO; + + if (enable) { + if (force) + value |= 0x03; + else + value |= 0x01; + } else { + value &= ~0x03; + } + + US_DEBUGP("In %s,set 0xfe47 to 0x%x\n", __func__, value); + + retval = rts51x_write_mem(us, 0xFE47, &value, 1); + if (retval < 0) + return -EIO; + + return 0; +} + +static int config_autodelink_after_power_on(struct us_data *us) +{ + struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra); + int retval; + u8 value; + + if (!CHK_AUTO_DELINK(chip)) + return 0; + + retval = rts51x_read_mem(us, 0xFE47, &value, 1); + if (retval < 0) + return -EIO; + + if (auto_delink_en) { + CLR_BIT(value, 0); + CLR_BIT(value, 1); + SET_BIT(value, 2); + + if (CHECK_ID(chip, 0x0138, 0x3882)) + CLR_BIT(value, 2); + + SET_BIT(value, 7); + + retval = rts51x_write_mem(us, 0xFE47, &value, 1); + if (retval < 0) + return -EIO; + + retval = enable_oscillator(us); + if (retval == 0) + (void)do_config_autodelink(us, 1, 0); + } else { + /* Autodelink controlled by firmware */ + + SET_BIT(value, 2); + + if (CHECK_ID(chip, 0x0138, 0x3882)) + CLR_BIT(value, 2); + + if (CHECK_ID(chip, 0x0159, 0x5889) || + CHECK_ID(chip, 0x0138, 0x3880)) { + CLR_BIT(value, 0); + CLR_BIT(value, 7); + } + + retval = rts51x_write_mem(us, 0xFE47, &value, 1); + if (retval < 0) + return -EIO; + + if (CHECK_ID(chip, 0x0159, 0x5888)) { + value = 0xFF; + retval = rts51x_write_mem(us, 0xFE79, &value, 1); + if (retval < 0) + return -EIO; + + value = 0x01; + retval = rts51x_write_mem(us, 0x48, &value, 1); + if (retval < 0) + return -EIO; + } + } + + return 0; +} + +static int config_autodelink_before_power_down(struct us_data *us) +{ + struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra); + int retval; + u8 value; + + if (!CHK_AUTO_DELINK(chip)) + return 0; + + if (auto_delink_en) { + retval = rts51x_read_mem(us, 0xFE77, &value, 1); + if (retval < 0) + return -EIO; + + SET_BIT(value, 2); + retval = rts51x_write_mem(us, 0xFE77, &value, 1); + if (retval < 0) + return -EIO; + + if (CHECK_ID(chip, 0x0159, 0x5888)) { + value = 0x01; + retval = rts51x_write_mem(us, 0x48, &value, 1); + if (retval < 0) + return -EIO; + } + + retval = rts51x_read_mem(us, 0xFE47, &value, 1); + if (retval < 0) + return -EIO; + + SET_BIT(value, 0); + if (CHECK_ID(chip, 0x0138, 0x3882)) + SET_BIT(value, 2); + retval = rts51x_write_mem(us, 0xFE77, &value, 1); + if (retval < 0) + return -EIO; + } else { + if (CHECK_ID(chip, 0x0159, 0x5889) || + CHECK_ID(chip, 0x0138, 0x3880) || + CHECK_ID(chip, 0x0138, 0x3882)) { + retval = rts51x_read_mem(us, 0xFE47, &value, 1); + if (retval < 0) + return -EIO; + + if (CHECK_ID(chip, 0x0159, 0x5889) || + CHECK_ID(chip, 0x0138, 0x3880)) { + SET_BIT(value, 0); + SET_BIT(value, 7); + } + + if (CHECK_ID(chip, 0x0138, 0x3882)) + SET_BIT(value, 2); + + retval = rts51x_write_mem(us, 0xFE47, &value, 1); + if (retval < 0) + return -EIO; + } + + if (CHECK_ID(chip, 0x0159, 0x5888)) { + value = 0x01; + retval = rts51x_write_mem(us, 0x48, &value, 1); + if (retval < 0) + return -EIO; + } + } + + return 0; +} + +static void realtek_cr_destructor(void *extra) +{ + struct rts51x_chip *chip = (struct rts51x_chip *)extra; + + if (!chip) + return; + + kfree(chip->status); +} + +#ifdef CONFIG_PM +static void realtek_pm_hook(struct us_data *us, int pm_state) +{ + if (pm_state == US_SUSPEND) + (void)config_autodelink_before_power_down(us); +} +#endif + +static int init_realtek_cr(struct us_data *us) +{ + struct rts51x_chip *chip; + int size, i, retval; + + chip = kzalloc(sizeof(struct rts51x_chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + us->extra = chip; + us->extra_destructor = realtek_cr_destructor; +#ifdef CONFIG_PM + us->suspend_resume_hook = realtek_pm_hook; +#endif + + us->max_lun = chip->max_lun = rts51x_get_max_lun(us); + + US_DEBUGP("chip->max_lun = %d\n", chip->max_lun); + + size = (chip->max_lun + 1) * sizeof(struct rts51x_status); + chip->status = kzalloc(size, GFP_KERNEL); + if (!chip->status) + goto INIT_FAIL; + + for (i = 0; i <= (int)(chip->max_lun); i++) { + retval = rts51x_check_status(us, (u8)i); + if (retval < 0) + goto INIT_FAIL; + } + + if (CHECK_FW_VER(chip, 0x5888) || CHECK_FW_VER(chip, 0x5889) || + CHECK_FW_VER(chip, 0x5901)) + SET_AUTO_DELINK(chip); + if (STATUS_LEN(chip) == 16) { + if (SUPPORT_AUTO_DELINK(chip)) + SET_AUTO_DELINK(chip); + } + + US_DEBUGP("chip->flag = 0x%x\n", chip->flag); + + (void)config_autodelink_after_power_on(us); + + return 0; + +INIT_FAIL: + if (us->extra) { + kfree(chip->status); + kfree(us->extra); + us->extra = NULL; + } + + return -EIO; +} + +static int realtek_cr_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + US_DEBUGP("Probe Realtek Card Reader!\n"); + + result = usb_stor_probe1(&us, intf, id, + (id - realtek_cr_ids) + realtek_cr_unusual_dev_list); + if (result) + return result; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver realtek_cr_driver = { + .name = "ums-realtek", + .probe = realtek_cr_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = realtek_cr_ids, + .soft_unbind = 1, +}; + +static int __init realtek_cr_init(void) +{ + return usb_register(&realtek_cr_driver); +} + +static void __exit realtek_cr_exit(void) +{ + usb_deregister(&realtek_cr_driver); +} + +module_init(realtek_cr_init); +module_exit(realtek_cr_exit); diff --git a/drivers/usb/storage/sierra_ms.c b/drivers/usb/storage/sierra_ms.c index ceba512f84d0..1deca07c8265 100644 --- a/drivers/usb/storage/sierra_ms.c +++ b/drivers/usb/storage/sierra_ms.c @@ -126,13 +126,11 @@ static DEVICE_ATTR(truinst, S_IRUGO, show_truinst, NULL); int sierra_ms_init(struct us_data *us) { int result, retries; - signed long delay_t; struct swoc_info *swocInfo; struct usb_device *udev; struct Scsi_Host *sh; struct scsi_device *sd; - delay_t = 2; retries = 3; result = 0; udev = us->pusb_dev; diff --git a/drivers/usb/storage/unusual_realtek.h b/drivers/usb/storage/unusual_realtek.h new file mode 100644 index 000000000000..3236e0328516 --- /dev/null +++ b/drivers/usb/storage/unusual_realtek.h @@ -0,0 +1,41 @@ +/* Driver for Realtek RTS51xx USB card reader + * + * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + * + * Author: + * wwang (wei_wang@realsil.com.cn) + * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China + */ + +#if defined(CONFIG_USB_STORAGE_REALTEK) || \ + defined(CONFIG_USB_STORAGE_REALTEK_MODULE) + +UNUSUAL_DEV(0x0bda, 0x0159, 0x0000, 0x9999, + "Realtek", + "USB Card Reader", + USB_SC_SCSI, USB_PR_BULK, init_realtek_cr, 0), + +UNUSUAL_DEV(0x0bda, 0x0158, 0x0000, 0x9999, + "Realtek", + "USB Card Reader", + USB_SC_SCSI, USB_PR_BULK, init_realtek_cr, 0), + +UNUSUAL_DEV(0x0bda, 0x0138, 0x0000, 0x9999, + "Realtek", + "USB Card Reader", + USB_SC_SCSI, USB_PR_BULK, init_realtek_cr, 0), + +#endif /* defined(CONFIG_USB_STORAGE_REALTEK) || ... */ diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c index 468bde7d1971..4293077c01aa 100644 --- a/drivers/usb/storage/usual-tables.c +++ b/drivers/usb/storage/usual-tables.c @@ -85,6 +85,7 @@ static struct ignore_entry ignore_ids[] = { # include "unusual_jumpshot.h" # include "unusual_karma.h" # include "unusual_onetouch.h" +# include "unusual_realtek.h" # include "unusual_sddr09.h" # include "unusual_sddr55.h" # include "unusual_usbat.h" diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c index a68ad7aa0b59..c175b7300c73 100644 --- a/drivers/usb/wusbcore/rh.c +++ b/drivers/usb/wusbcore/rh.c @@ -156,7 +156,7 @@ int wusbhc_rh_status_data(struct usb_hcd *usb_hcd, char *_buf) EXPORT_SYMBOL_GPL(wusbhc_rh_status_data); /* - * Return the hub's desciptor + * Return the hub's descriptor * * NOTE: almost cut and paste from ehci-hub.c * @@ -184,8 +184,8 @@ static int wusbhc_rh_get_hub_descr(struct wusbhc *wusbhc, u16 wValue, descr->bPwrOn2PwrGood = 0; descr->bHubContrCurrent = 0; /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */ - memset(&descr->bitmap[0], 0, temp); - memset(&descr->bitmap[temp], 0xff, temp); + memset(&descr->u.hs.DeviceRemovable[0], 0, temp); + memset(&descr->u.hs.DeviceRemovable[temp], 0xff, temp); return 0; } diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c index 2054d4ee9774..0faca16df765 100644 --- a/drivers/usb/wusbcore/wusbhc.c +++ b/drivers/usb/wusbcore/wusbhc.c @@ -320,7 +320,7 @@ u8 wusb_cluster_id_get(void) u8 id; spin_lock(&wusb_cluster_ids_lock); id = find_first_zero_bit(wusb_cluster_id_table, CLUSTER_IDS); - if (id > CLUSTER_IDS) { + if (id >= CLUSTER_IDS) { id = 0; goto out; } diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h index 3d94c4247f46..6bd426b7ec07 100644 --- a/drivers/usb/wusbcore/wusbhc.h +++ b/drivers/usb/wusbcore/wusbhc.h @@ -132,7 +132,7 @@ static inline void wusb_dev_put(struct wusb_dev *wusb_dev) } /** - * Wireless USB Host Controlller root hub "fake" ports + * Wireless USB Host Controller root hub "fake" ports * (state and device information) * * Wireless USB is wireless, so there are no ports; but we diff --git a/drivers/uwb/scan.c b/drivers/uwb/scan.c index 76a1a1ed7d3e..367aa12786b9 100644 --- a/drivers/uwb/scan.c +++ b/drivers/uwb/scan.c @@ -42,7 +42,7 @@ /** * Start/stop scanning in a radio controller * - * @rc: UWB Radio Controlller + * @rc: UWB Radio Controller * @channel: Channel to scan; encodings in WUSB1.0[Table 5.12] * @type: Type of scanning to do. * @bpst_offset: value at which to start scanning (if type == |