summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorNathan Lord <nlord@nvidia.com>2011-02-15 11:17:58 -0800
committerVarun Colbert <vcolbert@nvidia.com>2011-02-17 17:34:10 -0800
commitdcc9fce304ac5a6da2bedc14f5375e1dfc92edb5 (patch)
treea51c822355ac0e0ead4cfecfbdd0d53e510cfeca /drivers
parent10c07375d00e3de86692bfa7122319114db1c670 (diff)
media: video: tegra: update ov5650 mode settings
Switch to 2080x1164 for 1080p resolution. Add a reset to the I2C sequences. Bug 786227 Change-Id: I0514275c87504673a4297679bfa77d0a786f1532 Reviewed-on: http://git-master/r/19649 Reviewed-by: Nathan Lord <nlord@nvidia.com> Tested-by: Nathan Lord <nlord@nvidia.com> Reviewed-by: Daniel Willemsen <dwillemsen@nvidia.com> Reviewed-by: Varun Colbert <vcolbert@nvidia.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/media/video/tegra/ov5650.c272
1 files changed, 123 insertions, 149 deletions
diff --git a/drivers/media/video/tegra/ov5650.c b/drivers/media/video/tegra/ov5650.c
index c5b22298b355..1466e21c4941 100644
--- a/drivers/media/video/tegra/ov5650.c
+++ b/drivers/media/video/tegra/ov5650.c
@@ -61,11 +61,15 @@ static struct ov5650_reg *test_pattern_modes[] = {
tp_checker_seq,
};
-static struct ov5650_reg mode_start[] = {
+static struct ov5650_reg reset_seq[] = {
{0x3008, 0x82}, /* reset registers pg 72 */
{OV5650_TABLE_WAIT_MS, 5},
{0x3008, 0x42}, /* register power down pg 72 */
{OV5650_TABLE_WAIT_MS, 5},
+ {OV5650_TABLE_END, 0x0000},
+};
+
+static struct ov5650_reg mode_start[] = {
{0x3103, 0x93}, /* power up system clock from PLL page 77 */
{0x3017, 0xff}, /* PAD output enable page 100 */
{0x3018, 0xfc}, /* PAD output enable page 100 */
@@ -227,146 +231,113 @@ static struct ov5650_reg mode_1296x972[] = {
{OV5650_TABLE_END, 0x0000}
};
-static struct ov5650_reg mode_1920x1088[] = {
- {0x3621, 0x2f}, /* analog horizontal binning/sampling not enabled.
- pg 108 */
- {0x3632, 0x55}, /* analog pg 108 */
- {0x3703, 0xe6}, /* analog pg 108 */
- {0x370c, 0xa0}, /* analog pg 108 */
- {0x370d, 0x04}, /* analog pg 108 */
- {0x3713, 0x2f}, /* analog pg 108 */
- {0x3800, 0x02}, /* HREF start point higher 4 bits [3:0] pg 108 */
- {0x3801, 0x58}, /* HREF start point lower 8 bits [7:0] pg 108 */
- {0x3802, 0x00}, /* VREF start point higher 4 bits [3:0] pg 108 */
- {0x3803, 0x0c}, /* VREF start point [7:0] pg 108 */
- {0x3804, 0x0a}, /* HREF width higher 4 bits [3:0] pg 108 */
- {0x3805, 0x20}, /* HREF width lower 8 bits [7:0] pg 108 */
- {0x3806, 0x07}, /* VREF height higher 4 bits [3:0] pg 109 */
- {0x3807, 0xa0}, /* VREF height lower 8 bits [7:0] pg 109 */
- {0x3808, 0x0a}, /* DVP horizontal output size higher 4 bits [3:0]
- pg 109 */
- {0x3809, 0x20}, /* DVP horizontal output size lower 8 bits [7:0]
- pg 109 */
- {0x380a, 0x07}, /* DVP vertical output size higher 4 bits [3:0]
- pg 109 */
- {0x380b, 0xa0}, /* DVP vertical output size lower 8 bits [7:0]
- pg 109 */
- {0x380c, 0x0c}, /* total horizontal size higher 5 bits [4:0] pg 109,
- line length */
- {0x380d, 0xb4}, /* total horizontal size lower 8 bits [7:0] pg 109,
- line length */
- {0x380e, 0x07}, /* total vertical size higher 5 bits [4:0] pg 109,
- frame length */
- {0x380f, 0xb0}, /* total vertical size lower 8 bits [7:0] pg 109,
- frame length */
- {0x3818, 0xc0}, /* timing control reg18 mirror & dkhf pg 110 */
- {0x381a, 0x3c}, /* HS mirror adjustment pg 110 */
- {0x3a0d, 0x06}, /* b60 max pg 113 */
- {0x3c01, 0x00}, /* 5060HZ_CTRL01 pg 116 */
- {0x3007, 0x3f}, /* clock enable03 pg 98 */
- {0x5059, 0x80}, /* => NOT found */
- {0x3003, 0x03}, /* reset MIPI and DVP pg 97 */
- {0x3500, 0x00}, /* long exp 1/3 in unit of 1/16 line, pg 38 */
- {0x3501, 0x7a}, /* long exp 2/3 in unit of 1/16 line, pg 38,
- note frame length start with 0x7b0,
- and SENSOR_BAYER_DEFAULT_MAX_COARSE_DIFF=3 */
- {0x3502, 0xd0}, /* long exp 3/3 in unit of 1/16 line, pg 38.
- Two lines of integration time. */
- {0x350a, 0x00}, /* gain output to sensor, pg 38 */
- {0x350b, 0x00}, /* gain output to sensor, pg 38 */
- {0x4801, 0x0f}, /* MIPI control01 pg 125 */
- {0x300e, 0x0c}, /* SC_MIPI_SC_CTRL0 pg 73 */
- {0x4803, 0x50}, /* MIPI CTRL3 pg 91 */
- {0x4800, 0x34}, /* MIPI CTRl0 idle and short line pg 89 */
- {OV5650_TABLE_END, 0x0000}
-};
-
-static struct ov5650_reg mode_1264x704[] = {
- {0x3600, 0x54}, /* analog pg 108 */
- {0x3601, 0x05}, /* analog pg 108 */
- {0x3604, 0x40}, /* analog pg 108 */
- {0x3705, 0xdb}, /* analog pg 108 */
- {0x370a, 0x81}, /* analog pg 108 */
- {0x3615, 0x52}, /* analog pg 108 */
- {0x3810, 0x40}, /* TIMING HVOFFS both are zero pg 80 */
- {0x3836, 0x41}, /* TIMING HVPAD both are zero pg 82 */
- {0x4000, 0x05}, /* BLC enabled pg 120 */
- {0x401c, 0x42}, /* reserved pg 120 */
- {0x5046, 0x09}, /* ISP control isp disable awbg disable pg 133 */
- {0x3010, 0x00}, /* PLL control01 DIVM [3:0] DIVS [7:4] div 1 pg 99 */
- {0x3503, 0x00}, /* AEC auto AGC auto gain has no latch delay. pg 38 */
- {0x3613, 0xc4}, /* analog pg 108 */
-
- {0x3621, 0xaf}, /* analog horizontal binning/sampling not enabled.
- pg 108 */
- {0x3632, 0x55}, /* analog pg 108 */
- {0x3703, 0x9a}, /* analog pg 108 */
- {0x370c, 0x00}, /* analog pg 108 */
- {0x370d, 0x42}, /* analog pg 108 */
- {0x3713, 0x22}, /* analog pg 108 */
- {0x3800, 0x02}, /* HREF start point higher 4 bits [3:0] pg 108 */
- {0x3801, 0x54}, /* HREF start point lower 8 bits [7:0] pg 108 */
- {0x3802, 0x00}, /* VREF start point higher 4 bits [3:0] pg 108 */
- {0x3803, 0x0c}, /* VREF start point [7:0] pg 108 */
- {0x3804, 0x05}, /* HREF width higher 4 bits [3:0] pg 108 */
- {0x3805, 0x00}, /* HREF width lower 8 bits [7:0] pg 108 */
- {0x3806, 0x02}, /* VREF height higher 4 bits [3:0] pg 109 */
- {0x3807, 0xd0}, /* VREF height lower 8 bits [7:0] pg 109 */
- {0x3808, 0x05}, /* DVP horizontal output size higher 4 bits [3:0]
- pg 109 */
- {0x3809, 0x00}, /* DVP horizontal output size lower 8 bits [7:0]
- pg 109 */
- {0x380a, 0x02}, /* DVP vertical output size higher 4 bits [3:0]
- pg 109 */
- {0x380b, 0xd0}, /* DVP vertical output size lower 8 bits [7:0]
- pg 109 */
- {0x380c, 0x08}, /* total horizontal size higher 5 bits [4:0] pg 109,
- line length */
- {0x380d, 0x72}, /* total horizontal size lower 8 bits [7:0] pg 109,
- line length */
- {0x380e, 0x02}, /* total vertical size higher 5 bits [4:0] pg 109,
- frame length */
- {0x380f, 0xe4}, /* total vertical size lower 8 bits [7:0] pg 109,
- frame length */
- {0x3818, 0xc1}, /* timing control reg18 mirror & dkhf pg 110 */
- {0x381a, 0x3c}, /* HS mirror adjustment pg 110 */
- {0x3a0d, 0x06}, /* b60 max pg 113 */
- {0x3c01, 0x34}, /* 5060HZ_CTRL01 pg 116 */
- {0x3007, 0x3b}, /* clock enable03 pg 98 */
- {0x5059, 0x80}, /* => NOT found */
- {0x3003, 0x03}, /* reset MIPI and DVP pg 97 */
- {0x3500, 0x04}, /* long exp 1/3 in unit of 1/16 line, pg 38 */
- {0x3501, 0xa5}, /* long exp 2/3 in unit of 1/16 line, pg 38,
- note frame length start with 0x7b0,
- and SENSOR_BAYER_DEFAULT_MAX_COARSE_DIFF=3 */
- {0x3502, 0x10}, /* long exp 3/3 in unit of 1/16 line, pg 38.
- Two lines of integration time. */
- {0x350a, 0x00}, /* gain output to sensor, pg 38 */
- {0x350b, 0x00}, /* gain output to sensor, pg 38 */
- {0x4801, 0x0f}, /* MIPI control01 pg 125 */
- {0x300e, 0x0c}, /* SC_MIPI_SC_CTRL0 pg 73 */
- {0x4803, 0x50}, /* MIPI CTRL3 pg 91 */
- {0x4800, 0x24}, /* MIPI CTRl0 idle and short line pg 89 */
-
- {0x300f, 0x8b}, /* PLL control00 R_SELD5 [7:6] div by 4 R_DIVL [2]
- two lane div 1 SELD2P5 [1:0] div 2.5 pg 99 */
-
+static struct ov5650_reg mode_2080x1164[] = {
+ {0x3103, 0x93}, // power up system clock from PLL page 77
+ {0x3007, 0x3b}, // clock enable03 pg 98
+ {0x3017, 0xff}, // PAD output enable page 100
+ {0x3018, 0xfc}, // PAD output enable page 100
+
+ {0x3600, 0x54}, // analog pg 108
+ {0x3601, 0x05}, // analog pg 108
+ {0x3603, 0xa7}, // analog pg 108
+ {0x3604, 0x40}, // analog pg 108
+ {0x3605, 0x04}, // analog pg 108
+ {0x3606, 0x3f}, // analog pg 108
+ {0x3612, 0x1a}, // analog pg 108
+ {0x3613, 0x44}, // analog pg 108
+ {0x3615, 0x52}, // analog pg 108
+ {0x3620, 0x56}, // analog pg 108
+ {0x3623, 0x01}, // analog pg 108
+ {0x3630, 0x22}, // analog pg 108
+ {0x3631, 0x36}, // analog pg 108
+ {0x3632, 0x5f}, // analog pg 108
+ {0x3633, 0x24}, // analog pg 108
+
+ {0x3702, 0x3a}, // analog pg 108
+ {0x3704, 0x18}, // analog pg 108
+ {0x3706, 0x41}, // analog pg 108
+ {0x370b, 0x40}, // analog pg 108
+ {0x370e, 0x00}, // analog pg 108
+ {0x3710, 0x28}, // analog pg 108
{0x3711, 0x24},
- {0x3713, 0x92},
- {0x3714, 0x17},
- {0x381c, 0x10},
- {0x381d, 0x82},
- {0x381e, 0x05},
- {0x381f, 0xc0},
- {0x3821, 0x20},
- {0x3824, 0x23},
- {0x3825, 0x2c},
- {0x3826, 0x00},
- {0x3827, 0x0c},
- {0x3623, 0x01},
- {0x3633, 0x24},
- {0x3632, 0x5f},
- {0x401f, 0x03},
+ {0x3712, 0x13}, // analog pg 108
+
+ {0x3810, 0x00}, // TIMING HVOFFS both are zero pg 80
+ {0x3815, 0x82}, // PCLK to SCLK ratio bit[4:0] is set to 2 pg 81
+ {0x3830, 0x50}, // manual exposure gain bit [0]
+ {0x3836, 0x00}, // TIMING HVPAD both are zero pg 82
+
+ {0x3a1a, 0x06}, // DIFF MAX an AEC register??? pg 114
+ {0x3a18, 0x00}, // AEC gain ceiling bit 8 pg 114
+ {0x3a19, 0xf8}, // AEC gain ceiling pg 114
+ {0x3a00, 0x38}, // AEC control 0 debug mode band low limit mode band func pg 112
+ {0x3a0d, 0x06}, // b60 max pg 113
+ {0x3c01, 0x34}, // 5060HZ_CTRL01 pg 116
+
+ {0x401f, 0x03}, // BLC enabled pg 120
+ {0x4000, 0x05}, // BLC enabled pg 120
+ {0x401d, 0x08}, // reserved pg 120
+ {0x4001, 0x02}, // BLC control pg 120
+
+ {0x5000, 0x00}, // ISP control00 features are disabled. pg 132
+ {0x5001, 0x00}, // ISP control01 awb disabled. pg 132
+ {0x5002, 0x00}, // ISP control02 debug mode disabled pg 132
+ {0x503d, 0x00}, // ISP control3D features disabled pg 133
+ {0x5046, 0x00}, // ISP control isp disable awbg disable pg 133
+
+ {0x300f, 0x8f}, // PLL control00 R_SELD5 [7:6] div by 4 R_DIVL [2] two lane div 1 SELD2P5 [1:0] div 2.5 pg 99
+ {0x3010, 0x10}, // PLL control01 DIVM [3:0] DIVS [7:4] div 1 pg 99
+ {0x3011, 0x14}, // PLL control02 R_DIVP [5:0] div 20 pg 99
+ {0x3012, 0x02}, // PLL CTR 03, default
+ {0x3503, 0x33}, // AEC auto AGC auto gain has delay of 2 frames. pg 38
+
+ {0x3621, 0x2f}, // analog horizontal binning/sampling not enabled. pg 108
+ {0x3703, 0xe6}, // analog pg 108
+ {0x370c, 0x00}, // analog pg 108
+ {0x370d, 0x04}, // analog pg 108
+ {0x3713, 0x22}, // analog pg 108
+ {0x3714, 0x27},
+ {0x3705, 0xda},
+ {0x370a, 0x80},
+
+ {0x3800, 0x02}, // HREF start point higher 4 bits [3:0] pg 108
+ {0x3801, 0x12}, // HREF start point lower 8 bits [7:0] pg 108
+ {0x3802, 0x00}, // VREF start point higher 4 bits [3:0] pg 108
+ {0x3803, 0x0a}, // VREF start point [7:0] pg 108
+ {0x3804, 0x08}, // HREF width higher 4 bits [3:0] pg 108
+ {0x3805, 0x20}, // HREF width lower 8 bits [7:0] pg 108
+ {0x3806, 0x04}, // VREF height higher 4 bits [3:0] pg 109
+ {0x3807, 0x92}, // VREF height lower 8 bits [7:0] pg 109
+ {0x3808, 0x08}, // DVP horizontal output size higher 4 bits [3:0] pg 109
+ {0x3809, 0x20}, // DVP horizontal output size lower 8 bits [7:0] pg 109
+ {0x380a, 0x04}, // DVP vertical output size higher 4 bits [3:0] pg 109
+ {0x380b, 0x92}, // DVP vertical output size lower 8 bits [7:0] pg 109
+ {0x380c, 0x0a}, // total horizontal size higher 5 bits [4:0] pg 109, line length
+ {0x380d, 0x96}, // total horizontal size lower 8 bits [7:0] pg 109, line length
+ {0x380e, 0x04}, // total vertical size higher 5 bits [4:0] pg 109, frame length
+ {0x380f, 0x9e}, // total vertical size lower 8 bits [7:0] pg 109, frame length
+ {0x3818, 0xc0}, // timing control reg18 mirror & dkhf pg 110
+ {0x381a, 0x3c}, // HS mirror adjustment pg 110
+ {0x381c, 0x31},
+ {0x381d, 0x8e},
+ {0x381e, 0x04},
+ {0x381f, 0x92},
+ {0x3820, 0x04},
+ {0x3821, 0x19},
+ {0x3824, 0x01},
+ {0x3827, 0x0a},
+ {0x401c, 0x46},
+
+ {0x3003, 0x03}, // reset MIPI and DVP pg 97
+ {0x3500, 0x00}, // long exp 1/3 in unit of 1/16 line, pg 38
+ {0x3501, 0x49}, // long exp 2/3 in unit of 1/16 line, pg 38
+ {0x3502, 0xa0}, // long exp 3/3 in unit of 1/16 line, pg 38
+ {0x350a, 0x00}, // gain output to sensor, pg 38
+ {0x350b, 0x00}, // gain output to sensor, pg 38
+ {0x4801, 0x0f}, // MIPI control01 pg 125
+ {0x300e, 0x0c}, // SC_MIPI_SC_CTRL0 pg 73
+ {0x4803, 0x50}, // MIPI CTRL3 pg 91
+ {0x4800, 0x34}, // MIPI CTRl0 idle and short line pg 89
{OV5650_TABLE_END, 0x0000}
};
@@ -385,15 +356,13 @@ static struct ov5650_reg mode_end[] = {
enum {
OV5650_MODE_2592x1944,
OV5650_MODE_1296x972,
- OV5650_MODE_1920x1088,
- OV5650_MODE_1264x704,
+ OV5650_MODE_2080x1164
};
static struct ov5650_reg *mode_table[] = {
[OV5650_MODE_2592x1944] = mode_2592x1944,
[OV5650_MODE_1296x972] = mode_1296x972,
- [OV5650_MODE_1920x1088] = mode_1920x1088,
- [OV5650_MODE_1264x704] = mode_1264x704,
+ [OV5650_MODE_2080x1164] = mode_2080x1164
};
/* 2 regs to program frame length */
@@ -539,10 +508,8 @@ static int ov5650_set_mode(struct ov5650_info *info, struct ov5650_mode *mode)
sensor_mode = OV5650_MODE_2592x1944;
else if (mode->xres == 1296 && mode->yres == 972)
sensor_mode = OV5650_MODE_1296x972;
- else if (mode->xres == 1920 && mode->yres == 1088)
- sensor_mode = OV5650_MODE_1920x1088;
- else if (mode->xres == 1264 && mode->yres == 704)
- sensor_mode = OV5650_MODE_1264x704;
+ else if (mode->xres == 2080 && mode->yres == 1164)
+ sensor_mode = OV5650_MODE_2080x1164;
else {
pr_err("%s: invalid resolution supplied to set mode %d %d\n",
__func__, mode->xres, mode->yres);
@@ -555,6 +522,10 @@ static int ov5650_set_mode(struct ov5650_info *info, struct ov5650_mode *mode)
ov5650_get_coarse_time_regs(reg_list + 2, mode->coarse_time);
ov5650_get_gain_reg(reg_list + 5, mode->gain);
+ err = ov5650_write_table(info->i2c_client, reset_seq, NULL, 0);
+ if (err)
+ return err;
+
err = ov5650_write_table(info->i2c_client, mode_start, NULL, 0);
if (err)
return err;
@@ -639,6 +610,7 @@ static int ov5650_get_status(struct ov5650_info *info, u8 *status)
*status = 0;
err = ov5650_read_reg(info->i2c_client, 0x002, status);
+ pr_info("%s: %u %d\n", __func__, *status, err);
return err;
}
@@ -653,7 +625,6 @@ static int ov5650_test_pattern(struct ov5650_info *info,
NULL, 0);
}
-
static long ov5650_ioctl(struct file *file,
unsigned int cmd, unsigned long arg)
{
@@ -667,6 +638,7 @@ static long ov5650_ioctl(struct file *file,
if (copy_from_user(&mode,
(const void __user *)arg,
sizeof(struct ov5650_mode))) {
+ pr_info("%s %d\n", __func__, __LINE__);
return -EFAULT;
}
@@ -687,6 +659,7 @@ static long ov5650_ioctl(struct file *file,
return err;
if (copy_to_user((void __user *)arg, &status,
2)) {
+ pr_info("%s %d\n", __func__, __LINE__);
return -EFAULT;
}
return 0;
@@ -710,6 +683,7 @@ static int ov5650_open(struct inode *inode, struct file *file)
{
u8 status;
+ pr_info("%s\n", __func__);
file->private_data = info;
if (info->pdata && info->pdata->power_on)
info->pdata->power_on();