Remove the arm26 port

The arm26 port has been in a state where it was far from even compiling
for quite some time.

Ian Molton agreed with the removal.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 0 insertions, 298 deletions

diff --git a/include/asm-arm26/pgtable.h b/include/asm-arm26/pgtable.h
deleted file mode 100644
index 55a1a697d12b..000000000000
--- a/include/asm-arm26/pgtable.h
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- *  linux/include/asm-arm26/pgtable.h
- *
- *  Copyright (C) 2000-2002 Russell King
- *  Copyright (C) 2003 Ian Molton
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef _ASMARM_PGTABLE_H
-#define _ASMARM_PGTABLE_H
-
-#include <asm-generic/4level-fixup.h>
-
-#include <asm/memory.h>
-
-/*
- * The table below defines the page protection levels that we insert into our
- * Linux page table version.  These get translated into the best that the
- * architecture can perform.  Note that on most ARM hardware:
- *  1) We cannot do execute protection
- *  2) If we could do execute protection, then read is implied
- *  3) write implies read permissions
- */
-#define __P000  PAGE_NONE
-#define __P001  PAGE_READONLY
-#define __P010  PAGE_COPY
-#define __P011  PAGE_COPY
-#define __P100  PAGE_READONLY
-#define __P101  PAGE_READONLY
-#define __P110  PAGE_COPY
-#define __P111  PAGE_COPY
-
-#define __S000  PAGE_NONE
-#define __S001  PAGE_READONLY
-#define __S010  PAGE_SHARED
-#define __S011  PAGE_SHARED
-#define __S100  PAGE_READONLY
-#define __S101  PAGE_READONLY
-#define __S110  PAGE_SHARED
-#define __S111  PAGE_SHARED
-
-/*
- * PMD_SHIFT determines the size of the area a second-level page table can map
- * PGDIR_SHIFT determines what a third-level page table entry can map
- */
-#define PGD_SHIFT		25
-#define PMD_SHIFT		20
-
-#define PGD_SIZE                (1UL << PGD_SHIFT)
-#define PGD_MASK                (~(PGD_SIZE-1))
-#define PMD_SIZE                (1UL << PMD_SHIFT)
-#define PMD_MASK                (~(PMD_SIZE-1))
-
-/* The kernel likes to use these names for the above (ick) */
-#define PGDIR_SIZE PGD_SIZE
-#define PGDIR_MASK PGD_MASK
-
-#define PTRS_PER_PGD            32
-#define PTRS_PER_PMD            1
-#define PTRS_PER_PTE            32
-
-/*
- * This is the lowest virtual address we can permit any user space
- * mapping to be mapped at.  This is particularly important for
- * non-high vector CPUs.
- */
-#define FIRST_USER_ADDRESS	PAGE_SIZE
-
-#define FIRST_USER_PGD_NR       1
-#define USER_PTRS_PER_PGD       ((TASK_SIZE/PGD_SIZE) - FIRST_USER_PGD_NR)
-
-// FIXME - WTF?
-#define LIBRARY_TEXT_START	0x0c000000
-
-
-
-#ifndef __ASSEMBLY__
-extern void __pte_error(const char *file, int line, unsigned long val);
-extern void __pmd_error(const char *file, int line, unsigned long val);
-extern void __pgd_error(const char *file, int line, unsigned long val);
-
-#define pte_ERROR(pte)		__pte_error(__FILE__, __LINE__, pte_val(pte))
-#define pmd_ERROR(pmd)		__pmd_error(__FILE__, __LINE__, pmd_val(pmd))
-#define pgd_ERROR(pgd)		__pgd_error(__FILE__, __LINE__, pgd_val(pgd))
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
- */
-extern struct page *empty_zero_page;
-#define ZERO_PAGE(vaddr)	(empty_zero_page)
-
-#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
-#define pte_page(pte)           (pfn_to_page(pte_pfn(pte)))
-#define pfn_pte(pfn,prot)	(__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
-#define pages_to_mb(x)		((x) >> (20 - PAGE_SHIFT))
-#define mk_pte(page,prot)	pfn_pte(page_to_pfn(page),prot)
-
-/*
- * Terminology: PGD = Page Directory, PMD = Page Middle Directory,
- *              PTE = Page Table Entry
- *
- * on arm26 we have no 2nd level page table. we simulate this by removing the
- * PMD.
- *
- * pgd_none is 0 to prevernt pmd_alloc() calling __pmd_alloc(). This causes it
- * to return pmd_offset(pgd,addr) which is a pointer to the pgd (IOW, a no-op).
- *
- * however, to work this way, whilst we are allocating 32 pgds, containing 32
- * PTEs, the actual work is done on the PMDs, thus:
- *
- * instead of  mm->pgd->pmd->pte
- * we have     mm->pgdpmd->pte
- *
- * IOW, think of PGD operations and PMD ones as being the same thing, just
- * that PGD stuff deals with the mm_struct side of things, wheras PMD stuff
- * deals with the pte side of things.
- *
- * additionally, we store some bits in the PGD and PTE pointers: 
- * PGDs:
- *   o The lowest (1) bit of the PGD is to determine if it is present or swap.
- *   o The 2nd bit of the PGD is unused and must be zero.
- *   o The top 6 bits of the PGD must be zero. 
- * PTEs:
- *   o The lower 5 bits of a pte are flags. bit 1 is the 'present' flag. The
- *     others determine the pages attributes.
- *
- * the pgd_val, pmd_val, and pte_val macros seem to be private to our code.
- * They get the RAW value of the PGD/PMD/PTE entry, including our flags
- * encoded into the pointers.
- * 
- * The pgd_offset, pmd_offset, and pte_offset macros are used by the kernel,
- * so they shouldnt have our flags attached.
- *
- * If you understood that, feel free to explain it to me...
- *
- */
-
-#define _PMD_PRESENT     (0x01)
-
-/* These definitions allow us to optimise out stuff like pmd_alloc() */
-#define pgd_none(pgd)		(0) 
-#define pgd_bad(pgd)		(0)
-#define pgd_present(pgd)	(1)
-#define pgd_clear(pgdp)		do { } while (0)
-
-/* Whilst these handle our actual 'page directory' (the agglomeration of pgd and pmd)
- */
-#define pmd_none(pmd)           (!pmd_val(pmd))
-#define pmd_bad(pmd)            ((pmd_val(pmd) & 0xfc000002))
-#define pmd_present(pmd)        (pmd_val(pmd) & _PMD_PRESENT)
-#define set_pmd(pmd_ptr, pmd)   ((*(pmd_ptr)) = (pmd))
-#define pmd_clear(pmdp)         set_pmd(pmdp, __pmd(0))
-
-/* and these handle our pte tables */
-#define pte_none(pte)           (!pte_val(pte))
-#define pte_present(pte)        (pte_val(pte) & _PAGE_PRESENT)
-#define set_pte(pte_ptr, pte)   ((*(pte_ptr)) = (pte))
-#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
-#define pte_clear(mm,addr,ptep)	set_pte_at((mm),(addr),(ptep), __pte(0))
-
-/* macros to ease the getting of pointers to stuff... */
-#define pgd_offset(mm, addr)	((pgd_t *)(mm)->pgd        + __pgd_index(addr))
-#define pmd_offset(pgd, addr)	((pmd_t *)(pgd))
-#define pte_offset(pmd, addr)   ((pte_t *)pmd_page(*(pmd)) + __pte_index(addr))
-
-/* there is no __pmd_index as we dont use pmds */
-#define __pgd_index(addr)	((addr) >> PGD_SHIFT)
-#define __pte_index(addr)	(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
-
-
-/* Keep the kernel happy */
-#define pgd_index(addr)         __pgd_index(addr)
-#define pgd_offset_k(addr)	(pgd_offset(&init_mm, addr))
-
-/*
- * The vmalloc() routines leaves a hole of 4kB between each vmalloced
- * area for the same reason. ;) FIXME: surely 1 page not 4k ?
- */
-#define VMALLOC_START     0x01a00000
-#define VMALLOC_END       0x01c00000
-
-/* Is pmd_page supposed to return a pointer to a page in some arches? ours seems to
- * return a pointer to memory (no special alignment)
- */
-#define pmd_page(pmd)  ((struct page *)(pmd_val((pmd)) & ~_PMD_PRESENT))
-#define pmd_page_vaddr(pmd) ((pte_t *)(pmd_val((pmd)) & ~_PMD_PRESENT))
-
-#define pte_offset_kernel(dir,addr)     (pmd_page_vaddr(*(dir)) + __pte_index(addr))
-
-#define pte_offset_map(dir,addr)        (pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_offset_map_nested(dir,addr) (pmd_page_vaddr(*(dir)) + __pte_index(addr))
-#define pte_unmap(pte)                  do { } while (0)
-#define pte_unmap_nested(pte)           do { } while (0)
-
-
-#define _PAGE_PRESENT   0x01
-#define _PAGE_READONLY  0x02
-#define _PAGE_NOT_USER  0x04
-#define _PAGE_OLD       0x08
-#define _PAGE_CLEAN     0x10
-
-// an old page has never been read.
-// a clean page has never been written.
-
-/*                               -- present --   -- !dirty --  --- !write ---   ---- !user --- */
-#define PAGE_NONE       __pgprot(_PAGE_PRESENT | _PAGE_CLEAN | _PAGE_READONLY | _PAGE_NOT_USER)
-#define PAGE_SHARED     __pgprot(_PAGE_PRESENT | _PAGE_CLEAN                                  )
-#define PAGE_COPY       __pgprot(_PAGE_PRESENT | _PAGE_CLEAN | _PAGE_READONLY                 )
-#define PAGE_READONLY   __pgprot(_PAGE_PRESENT | _PAGE_CLEAN | _PAGE_READONLY                 )
-#define PAGE_KERNEL     __pgprot(_PAGE_PRESENT                                | _PAGE_NOT_USER)
-
-#define _PAGE_CHG_MASK  (PAGE_MASK | _PAGE_OLD | _PAGE_CLEAN)
-
-/*
- * The following only work if pte_present() is true.
- * Undefined behaviour if not..
- */
-#define pte_write(pte)                  (!(pte_val(pte) & _PAGE_READONLY))
-#define pte_dirty(pte)                  (!(pte_val(pte) & _PAGE_CLEAN))
-#define pte_young(pte)                  (!(pte_val(pte) & _PAGE_OLD))
-//ONLY when !pte_present() I think. nicked from arm32 (FIXME!)
-#define pte_file(pte)                   (!(pte_val(pte) & _PAGE_OLD))
-
-#define PTE_BIT_FUNC(fn,op)                     \
-static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
-
-PTE_BIT_FUNC(wrprotect, |=  _PAGE_READONLY);
-PTE_BIT_FUNC(mkwrite,   &= ~_PAGE_READONLY);
-PTE_BIT_FUNC(mkclean,   |=  _PAGE_CLEAN);
-PTE_BIT_FUNC(mkdirty,   &= ~_PAGE_CLEAN);
-PTE_BIT_FUNC(mkold,     |=  _PAGE_OLD);
-PTE_BIT_FUNC(mkyoung,   &= ~_PAGE_OLD);
-
-/*
- * We don't store cache state bits in the page table here. FIXME - or do we?
- */
-#define pgprot_noncached(prot)  (prot)
-#define pgprot_writecombine(prot) (prot) //FIXME - is a no-op?
-
-extern void pgtable_cache_init(void);
-
-//FIXME - nicked from arm32 and brutally hacked. probably wrong.
-#define pte_to_pgoff(x) (pte_val(x) >> 2)
-#define pgoff_to_pte(x) __pte(((x) << 2) & ~_PAGE_OLD)
-
-//FIXME - next line borrowed from arm32. is it right?
-#define PTE_FILE_MAX_BITS       30
-
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-	pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
-	return pte;
-}
-
-extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
-
-/* Encode and decode a swap entry.
- *
- * We support up to 32GB of swap on 4k machines
- */
-#define __swp_type(x)		(((x).val >> 2) & 0x7f)
-#define __swp_offset(x)		((x).val >> 9)
-#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) })
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(swp)	((pte_t) { (swp).val })
-
-/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
-/* FIXME: this is not correct */
-#define kern_addr_valid(addr)	(1)
-
-/*
- * Conversion functions: convert a page and protection to a page entry,
- * and a page entry and page directory to the page they refer to.
- */
-static inline pte_t mk_pte_phys(unsigned long physpage, pgprot_t pgprot)
-{
-        pte_t pte;
-        pte_val(pte) = physpage | pgprot_val(pgprot);
-        return pte;
-}
-
-
-#include <asm-generic/pgtable.h>
-
-/*
- * remap a physical page `pfn' of size `size' with page protection `prot'
- * into virtual address `from'
- */
-#define io_remap_pfn_range(vma,from,pfn,size,prot) \
-		remap_pfn_range(vma, from, pfn, size, prot)
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* _ASMARM_PGTABLE_H */