x86, um: ... and asm-x86 move

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

1 files changed, 0 insertions, 184 deletions

diff --git a/include/asm-x86/kvm_x86_emulate.h b/include/asm-x86/kvm_x86_emulate.h
deleted file mode 100644
index e2d9b030c1ac..000000000000
--- a/include/asm-x86/kvm_x86_emulate.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/******************************************************************************
- * x86_emulate.h
- *
- * Generic x86 (32-bit and 64-bit) instruction decoder and emulator.
- *
- * Copyright (c) 2005 Keir Fraser
- *
- * From: xen-unstable 10676:af9809f51f81a3c43f276f00c81a52ef558afda4
- */
-
-#ifndef ASM_X86__KVM_X86_EMULATE_H
-#define ASM_X86__KVM_X86_EMULATE_H
-
-struct x86_emulate_ctxt;
-
-/*
- * x86_emulate_ops:
- *
- * These operations represent the instruction emulator's interface to memory.
- * There are two categories of operation: those that act on ordinary memory
- * regions (*_std), and those that act on memory regions known to require
- * special treatment or emulation (*_emulated).
- *
- * The emulator assumes that an instruction accesses only one 'emulated memory'
- * location, that this location is the given linear faulting address (cr2), and
- * that this is one of the instruction's data operands. Instruction fetches and
- * stack operations are assumed never to access emulated memory. The emulator
- * automatically deduces which operand of a string-move operation is accessing
- * emulated memory, and assumes that the other operand accesses normal memory.
- *
- * NOTES:
- *  1. The emulator isn't very smart about emulated vs. standard memory.
- *     'Emulated memory' access addresses should be checked for sanity.
- *     'Normal memory' accesses may fault, and the caller must arrange to
- *     detect and handle reentrancy into the emulator via recursive faults.
- *     Accesses may be unaligned and may cross page boundaries.
- *  2. If the access fails (cannot emulate, or a standard access faults) then
- *     it is up to the memop to propagate the fault to the guest VM via
- *     some out-of-band mechanism, unknown to the emulator. The memop signals
- *     failure by returning X86EMUL_PROPAGATE_FAULT to the emulator, which will
- *     then immediately bail.
- *  3. Valid access sizes are 1, 2, 4 and 8 bytes. On x86/32 systems only
- *     cmpxchg8b_emulated need support 8-byte accesses.
- *  4. The emulator cannot handle 64-bit mode emulation on an x86/32 system.
- */
-/* Access completed successfully: continue emulation as normal. */
-#define X86EMUL_CONTINUE        0
-/* Access is unhandleable: bail from emulation and return error to caller. */
-#define X86EMUL_UNHANDLEABLE    1
-/* Terminate emulation but return success to the caller. */
-#define X86EMUL_PROPAGATE_FAULT 2 /* propagate a generated fault to guest */
-#define X86EMUL_RETRY_INSTR     2 /* retry the instruction for some reason */
-#define X86EMUL_CMPXCHG_FAILED  2 /* cmpxchg did not see expected value */
-struct x86_emulate_ops {
-	/*
-	 * read_std: Read bytes of standard (non-emulated/special) memory.
-	 *           Used for instruction fetch, stack operations, and others.
-	 *  @addr:  [IN ] Linear address from which to read.
-	 *  @val:   [OUT] Value read from memory, zero-extended to 'u_long'.
-	 *  @bytes: [IN ] Number of bytes to read from memory.
-	 */
-	int (*read_std)(unsigned long addr, void *val,
-			unsigned int bytes, struct kvm_vcpu *vcpu);
-
-	/*
-	 * read_emulated: Read bytes from emulated/special memory area.
-	 *  @addr:  [IN ] Linear address from which to read.
-	 *  @val:   [OUT] Value read from memory, zero-extended to 'u_long'.
-	 *  @bytes: [IN ] Number of bytes to read from memory.
-	 */
-	int (*read_emulated)(unsigned long addr,
-			     void *val,
-			     unsigned int bytes,
-			     struct kvm_vcpu *vcpu);
-
-	/*
-	 * write_emulated: Read bytes from emulated/special memory area.
-	 *  @addr:  [IN ] Linear address to which to write.
-	 *  @val:   [IN ] Value to write to memory (low-order bytes used as
-	 *                required).
-	 *  @bytes: [IN ] Number of bytes to write to memory.
-	 */
-	int (*write_emulated)(unsigned long addr,
-			      const void *val,
-			      unsigned int bytes,
-			      struct kvm_vcpu *vcpu);
-
-	/*
-	 * cmpxchg_emulated: Emulate an atomic (LOCKed) CMPXCHG operation on an
-	 *                   emulated/special memory area.
-	 *  @addr:  [IN ] Linear address to access.
-	 *  @old:   [IN ] Value expected to be current at @addr.
-	 *  @new:   [IN ] Value to write to @addr.
-	 *  @bytes: [IN ] Number of bytes to access using CMPXCHG.
-	 */
-	int (*cmpxchg_emulated)(unsigned long addr,
-				const void *old,
-				const void *new,
-				unsigned int bytes,
-				struct kvm_vcpu *vcpu);
-
-};
-
-/* Type, address-of, and value of an instruction's operand. */
-struct operand {
-	enum { OP_REG, OP_MEM, OP_IMM, OP_NONE } type;
-	unsigned int bytes;
-	unsigned long val, orig_val, *ptr;
-};
-
-struct fetch_cache {
-	u8 data[15];
-	unsigned long start;
-	unsigned long end;
-};
-
-struct decode_cache {
-	u8 twobyte;
-	u8 b;
-	u8 lock_prefix;
-	u8 rep_prefix;
-	u8 op_bytes;
-	u8 ad_bytes;
-	u8 rex_prefix;
-	struct operand src;
-	struct operand dst;
-	bool has_seg_override;
-	u8 seg_override;
-	unsigned int d;
-	unsigned long regs[NR_VCPU_REGS];
-	unsigned long eip;
-	/* modrm */
-	u8 modrm;
-	u8 modrm_mod;
-	u8 modrm_reg;
-	u8 modrm_rm;
-	u8 use_modrm_ea;
-	bool rip_relative;
-	unsigned long modrm_ea;
-	void *modrm_ptr;
-	unsigned long modrm_val;
-	struct fetch_cache fetch;
-};
-
-struct x86_emulate_ctxt {
-	/* Register state before/after emulation. */
-	struct kvm_vcpu *vcpu;
-
-	/* Linear faulting address (if emulating a page-faulting instruction) */
-	unsigned long eflags;
-
-	/* Emulated execution mode, represented by an X86EMUL_MODE value. */
-	int mode;
-
-	u32 cs_base;
-
-	/* decode cache */
-
-	struct decode_cache decode;
-};
-
-/* Repeat String Operation Prefix */
-#define REPE_PREFIX  1
-#define REPNE_PREFIX    2
-
-/* Execution mode, passed to the emulator. */
-#define X86EMUL_MODE_REAL     0	/* Real mode.             */
-#define X86EMUL_MODE_PROT16   2	/* 16-bit protected mode. */
-#define X86EMUL_MODE_PROT32   4	/* 32-bit protected mode. */
-#define X86EMUL_MODE_PROT64   8	/* 64-bit (long) mode.    */
-
-/* Host execution mode. */
-#if defined(__i386__)
-#define X86EMUL_MODE_HOST X86EMUL_MODE_PROT32
-#elif defined(CONFIG_X86_64)
-#define X86EMUL_MODE_HOST X86EMUL_MODE_PROT64
-#endif
-
-int x86_decode_insn(struct x86_emulate_ctxt *ctxt,
-		    struct x86_emulate_ops *ops);
-int x86_emulate_insn(struct x86_emulate_ctxt *ctxt,
-		     struct x86_emulate_ops *ops);
-
-#endif /* ASM_X86__KVM_X86_EMULATE_H */