summaryrefslogtreecommitdiff
path: root/include/linux/cyclades.h
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /include/linux/cyclades.h
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'include/linux/cyclades.h')
-rw-r--r--include/linux/cyclades.h827
1 files changed, 827 insertions, 0 deletions
diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h
new file mode 100644
index 000000000000..46d8254c1a79
--- /dev/null
+++ b/include/linux/cyclades.h
@@ -0,0 +1,827 @@
+/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $
+ * linux/include/linux/cyclades.h
+ *
+ * This file was initially written by
+ * Randolph Bentson <bentson@grieg.seaslug.org> and is maintained by
+ * Ivan Passos <ivan@cyclades.com>.
+ *
+ * This file contains the general definitions for the cyclades.c driver
+ *$Log: cyclades.h,v $
+ *Revision 3.1 2002/01/29 11:36:16 henrique
+ *added throttle field on struct cyclades_port to indicate whether the
+ *port is throttled or not
+ *
+ *Revision 3.1 2000/04/19 18:52:52 ivan
+ *converted address fields to unsigned long and added fields for physical
+ *addresses on cyclades_card structure;
+ *
+ *Revision 3.0 1998/11/02 14:20:59 ivan
+ *added nports field on cyclades_card structure;
+ *
+ *Revision 2.5 1998/08/03 16:57:01 ivan
+ *added cyclades_idle_stats structure;
+ *
+ *Revision 2.4 1998/06/01 12:09:53 ivan
+ *removed closing_wait2 from cyclades_port structure;
+ *
+ *Revision 2.3 1998/03/16 18:01:12 ivan
+ *changes in the cyclades_port structure to get it closer to the
+ *standard serial port structure;
+ *added constants for new ioctls;
+ *
+ *Revision 2.2 1998/02/17 16:50:00 ivan
+ *changes in the cyclades_port structure (addition of shutdown_wait and
+ *chip_rev variables);
+ *added constants for new ioctls and for CD1400 rev. numbers.
+ *
+ *Revision 2.1 1997/10/24 16:03:00 ivan
+ *added rflow (which allows enabling the CD1400 special flow control
+ *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to
+ *cyclades_port structure;
+ *added Alpha support
+ *
+ *Revision 2.0 1997/06/30 10:30:00 ivan
+ *added some new doorbell command constants related to IOCTLW and
+ *UART error signaling
+ *
+ *Revision 1.8 1997/06/03 15:30:00 ivan
+ *added constant ZFIRM_HLT
+ *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin)
+ *
+ *Revision 1.7 1997/03/26 10:30:00 daniel
+ *new entries at the end of cyclades_port struct to reallocate
+ *variables illegally allocated within card memory.
+ *
+ *Revision 1.6 1996/09/09 18:35:30 bentson
+ *fold in changes for Cyclom-Z -- including structures for
+ *communicating with board as well modest changes to original
+ *structures to support new features.
+ *
+ *Revision 1.5 1995/11/13 21:13:31 bentson
+ *changes suggested by Michael Chastain <mec@duracef.shout.net>
+ *to support use of this file in non-kernel applications
+ *
+ *
+ */
+
+#ifndef _LINUX_CYCLADES_H
+#define _LINUX_CYCLADES_H
+
+struct cyclades_monitor {
+ unsigned long int_count;
+ unsigned long char_count;
+ unsigned long char_max;
+ unsigned long char_last;
+};
+
+/*
+ * These stats all reflect activity since the device was last initialized.
+ * (i.e., since the port was opened with no other processes already having it
+ * open)
+ */
+struct cyclades_idle_stats {
+ time_t in_use; /* Time device has been in use (secs) */
+ time_t recv_idle; /* Time since last char received (secs) */
+ time_t xmit_idle; /* Time since last char transmitted (secs) */
+ unsigned long recv_bytes; /* Bytes received */
+ unsigned long xmit_bytes; /* Bytes transmitted */
+ unsigned long overruns; /* Input overruns */
+ unsigned long frame_errs; /* Input framing errors */
+ unsigned long parity_errs; /* Input parity errors */
+};
+
+#define CYCLADES_MAGIC 0x4359
+
+#define CYGETMON 0x435901
+#define CYGETTHRESH 0x435902
+#define CYSETTHRESH 0x435903
+#define CYGETDEFTHRESH 0x435904
+#define CYSETDEFTHRESH 0x435905
+#define CYGETTIMEOUT 0x435906
+#define CYSETTIMEOUT 0x435907
+#define CYGETDEFTIMEOUT 0x435908
+#define CYSETDEFTIMEOUT 0x435909
+#define CYSETRFLOW 0x43590a
+#define CYGETRFLOW 0x43590b
+#define CYSETRTSDTR_INV 0x43590c
+#define CYGETRTSDTR_INV 0x43590d
+#define CYZSETPOLLCYCLE 0x43590e
+#define CYZGETPOLLCYCLE 0x43590f
+#define CYGETCD1400VER 0x435910
+#define CYGETCARDINFO 0x435911
+#define CYSETWAIT 0x435912
+#define CYGETWAIT 0x435913
+
+/*************** CYCLOM-Z ADDITIONS ***************/
+
+#define CZIOC ('M' << 8)
+#define CZ_NBOARDS (CZIOC|0xfa)
+#define CZ_BOOT_START (CZIOC|0xfb)
+#define CZ_BOOT_DATA (CZIOC|0xfc)
+#define CZ_BOOT_END (CZIOC|0xfd)
+#define CZ_TEST (CZIOC|0xfe)
+
+#define CZ_DEF_POLL (HZ/25)
+
+#define MAX_BOARD 4 /* Max number of boards */
+#define MAX_DEV 256 /* Max number of ports total */
+#define CYZ_MAX_SPEED 921600
+
+#define CYZ_FIFO_SIZE 16
+
+#define CYZ_BOOT_NWORDS 0x100
+struct CYZ_BOOT_CTRL {
+ unsigned short nboard;
+ int status[MAX_BOARD];
+ int nchannel[MAX_BOARD];
+ int fw_rev[MAX_BOARD];
+ unsigned long offset;
+ unsigned long data[CYZ_BOOT_NWORDS];
+};
+
+
+#ifndef DP_WINDOW_SIZE
+/* #include "cyclomz.h" */
+/****************** ****************** *******************/
+/*
+ * The data types defined below are used in all ZFIRM interface
+ * data structures. They accomodate differences between HW
+ * architectures and compilers.
+ */
+
+#if defined(__alpha__)
+typedef unsigned long ucdouble; /* 64 bits, unsigned */
+typedef unsigned int uclong; /* 32 bits, unsigned */
+#else
+typedef unsigned long uclong; /* 32 bits, unsigned */
+#endif
+typedef unsigned short ucshort; /* 16 bits, unsigned */
+typedef unsigned char ucchar; /* 8 bits, unsigned */
+
+/*
+ * Memory Window Sizes
+ */
+
+#define DP_WINDOW_SIZE (0x00080000) /* window size 512 Kb */
+#define ZE_DP_WINDOW_SIZE (0x00100000) /* window size 1 Mb (Ze and
+ 8Zo V.2 */
+#define CTRL_WINDOW_SIZE (0x00000080) /* runtime regs 128 bytes */
+
+/*
+ * CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver
+ * normally will access only interested on the fpga_id, fpga_version,
+ * start_cpu and stop_cpu.
+ */
+
+struct CUSTOM_REG {
+ uclong fpga_id; /* FPGA Identification Register */
+ uclong fpga_version; /* FPGA Version Number Register */
+ uclong cpu_start; /* CPU start Register (write) */
+ uclong cpu_stop; /* CPU stop Register (write) */
+ uclong misc_reg; /* Miscelaneous Register */
+ uclong idt_mode; /* IDT mode Register */
+ uclong uart_irq_status; /* UART IRQ status Register */
+ uclong clear_timer0_irq; /* Clear timer interrupt Register */
+ uclong clear_timer1_irq; /* Clear timer interrupt Register */
+ uclong clear_timer2_irq; /* Clear timer interrupt Register */
+ uclong test_register; /* Test Register */
+ uclong test_count; /* Test Count Register */
+ uclong timer_select; /* Timer select register */
+ uclong pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */
+ uclong ram_wait_state; /* RAM wait-state Register */
+ uclong uart_wait_state; /* UART wait-state Register */
+ uclong timer_wait_state; /* timer wait-state Register */
+ uclong ack_wait_state; /* ACK wait State Register */
+};
+
+/*
+ * RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime
+ * registers. This structure can be used to access the 9060 registers
+ * (memory mapped).
+ */
+
+struct RUNTIME_9060 {
+ uclong loc_addr_range; /* 00h - Local Address Range */
+ uclong loc_addr_base; /* 04h - Local Address Base */
+ uclong loc_arbitr; /* 08h - Local Arbitration */
+ uclong endian_descr; /* 0Ch - Big/Little Endian Descriptor */
+ uclong loc_rom_range; /* 10h - Local ROM Range */
+ uclong loc_rom_base; /* 14h - Local ROM Base */
+ uclong loc_bus_descr; /* 18h - Local Bus descriptor */
+ uclong loc_range_mst; /* 1Ch - Local Range for Master to PCI */
+ uclong loc_base_mst; /* 20h - Local Base for Master PCI */
+ uclong loc_range_io; /* 24h - Local Range for Master IO */
+ uclong pci_base_mst; /* 28h - PCI Base for Master PCI */
+ uclong pci_conf_io; /* 2Ch - PCI configuration for Master IO */
+ uclong filler1; /* 30h */
+ uclong filler2; /* 34h */
+ uclong filler3; /* 38h */
+ uclong filler4; /* 3Ch */
+ uclong mail_box_0; /* 40h - Mail Box 0 */
+ uclong mail_box_1; /* 44h - Mail Box 1 */
+ uclong mail_box_2; /* 48h - Mail Box 2 */
+ uclong mail_box_3; /* 4Ch - Mail Box 3 */
+ uclong filler5; /* 50h */
+ uclong filler6; /* 54h */
+ uclong filler7; /* 58h */
+ uclong filler8; /* 5Ch */
+ uclong pci_doorbell; /* 60h - PCI to Local Doorbell */
+ uclong loc_doorbell; /* 64h - Local to PCI Doorbell */
+ uclong intr_ctrl_stat; /* 68h - Interrupt Control/Status */
+ uclong init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */
+};
+
+/* Values for the Local Base Address re-map register */
+
+#define WIN_RAM 0x00000001L /* set the sliding window to RAM */
+#define WIN_CREG 0x14000001L /* set the window to custom Registers */
+
+/* Values timer select registers */
+
+#define TIMER_BY_1M 0x00 /* clock divided by 1M */
+#define TIMER_BY_256K 0x01 /* clock divided by 256k */
+#define TIMER_BY_128K 0x02 /* clock divided by 128k */
+#define TIMER_BY_32K 0x03 /* clock divided by 32k */
+
+/****************** ****************** *******************/
+#endif
+
+#ifndef ZFIRM_ID
+/* #include "zfwint.h" */
+/****************** ****************** *******************/
+/*
+ * This file contains the definitions for interfacing with the
+ * Cyclom-Z ZFIRM Firmware.
+ */
+
+/* General Constant definitions */
+
+#define MAX_CHAN 64 /* max number of channels per board */
+
+/* firmware id structure (set after boot) */
+
+#define ID_ADDRESS 0x00000180L /* signature/pointer address */
+#define ZFIRM_ID 0x5557465AL /* ZFIRM/U signature */
+#define ZFIRM_HLT 0x59505B5CL /* ZFIRM needs external power supply */
+#define ZFIRM_RST 0x56040674L /* RST signal (due to FW reset) */
+
+#define ZF_TINACT_DEF 1000 /* default inactivity timeout
+ (1000 ms) */
+#define ZF_TINACT ZF_TINACT_DEF
+
+struct FIRM_ID {
+ uclong signature; /* ZFIRM/U signature */
+ uclong zfwctrl_addr; /* pointer to ZFW_CTRL structure */
+};
+
+/* Op. System id */
+
+#define C_OS_LINUX 0x00000030 /* generic Linux system */
+
+/* channel op_mode */
+
+#define C_CH_DISABLE 0x00000000 /* channel is disabled */
+#define C_CH_TXENABLE 0x00000001 /* channel Tx enabled */
+#define C_CH_RXENABLE 0x00000002 /* channel Rx enabled */
+#define C_CH_ENABLE 0x00000003 /* channel Tx/Rx enabled */
+#define C_CH_LOOPBACK 0x00000004 /* Loopback mode */
+
+/* comm_parity - parity */
+
+#define C_PR_NONE 0x00000000 /* None */
+#define C_PR_ODD 0x00000001 /* Odd */
+#define C_PR_EVEN 0x00000002 /* Even */
+#define C_PR_MARK 0x00000004 /* Mark */
+#define C_PR_SPACE 0x00000008 /* Space */
+#define C_PR_PARITY 0x000000ff
+
+#define C_PR_DISCARD 0x00000100 /* discard char with frame/par error */
+#define C_PR_IGNORE 0x00000200 /* ignore frame/par error */
+
+/* comm_data_l - data length and stop bits */
+
+#define C_DL_CS5 0x00000001
+#define C_DL_CS6 0x00000002
+#define C_DL_CS7 0x00000004
+#define C_DL_CS8 0x00000008
+#define C_DL_CS 0x0000000f
+#define C_DL_1STOP 0x00000010
+#define C_DL_15STOP 0x00000020
+#define C_DL_2STOP 0x00000040
+#define C_DL_STOP 0x000000f0
+
+/* interrupt enabling/status */
+
+#define C_IN_DISABLE 0x00000000 /* zero, disable interrupts */
+#define C_IN_TXBEMPTY 0x00000001 /* tx buffer empty */
+#define C_IN_TXLOWWM 0x00000002 /* tx buffer below LWM */
+#define C_IN_RXHIWM 0x00000010 /* rx buffer above HWM */
+#define C_IN_RXNNDT 0x00000020 /* rx no new data timeout */
+#define C_IN_MDCD 0x00000100 /* modem DCD change */
+#define C_IN_MDSR 0x00000200 /* modem DSR change */
+#define C_IN_MRI 0x00000400 /* modem RI change */
+#define C_IN_MCTS 0x00000800 /* modem CTS change */
+#define C_IN_RXBRK 0x00001000 /* Break received */
+#define C_IN_PR_ERROR 0x00002000 /* parity error */
+#define C_IN_FR_ERROR 0x00004000 /* frame error */
+#define C_IN_OVR_ERROR 0x00008000 /* overrun error */
+#define C_IN_RXOFL 0x00010000 /* RX buffer overflow */
+#define C_IN_IOCTLW 0x00020000 /* I/O control w/ wait */
+#define C_IN_MRTS 0x00040000 /* modem RTS drop */
+#define C_IN_ICHAR 0x00080000
+
+/* flow control */
+
+#define C_FL_OXX 0x00000001 /* output Xon/Xoff flow control */
+#define C_FL_IXX 0x00000002 /* output Xon/Xoff flow control */
+#define C_FL_OIXANY 0x00000004 /* output Xon/Xoff (any xon) */
+#define C_FL_SWFLOW 0x0000000f
+
+/* flow status */
+
+#define C_FS_TXIDLE 0x00000000 /* no Tx data in the buffer or UART */
+#define C_FS_SENDING 0x00000001 /* UART is sending data */
+#define C_FS_SWFLOW 0x00000002 /* Tx is stopped by received Xoff */
+
+/* rs_control/rs_status RS-232 signals */
+
+#define C_RS_PARAM 0x80000000 /* Indicates presence of parameter in
+ IOCTLM command */
+#define C_RS_RTS 0x00000001 /* RTS */
+#define C_RS_DTR 0x00000004 /* DTR */
+#define C_RS_DCD 0x00000100 /* CD */
+#define C_RS_DSR 0x00000200 /* DSR */
+#define C_RS_RI 0x00000400 /* RI */
+#define C_RS_CTS 0x00000800 /* CTS */
+
+/* commands Host <-> Board */
+
+#define C_CM_RESET 0x01 /* reset/flush buffers */
+#define C_CM_IOCTL 0x02 /* re-read CH_CTRL */
+#define C_CM_IOCTLW 0x03 /* re-read CH_CTRL, intr when done */
+#define C_CM_IOCTLM 0x04 /* RS-232 outputs change */
+#define C_CM_SENDXOFF 0x10 /* send Xoff */
+#define C_CM_SENDXON 0x11 /* send Xon */
+#define C_CM_CLFLOW 0x12 /* Clear flow control (resume) */
+#define C_CM_SENDBRK 0x41 /* send break */
+#define C_CM_INTBACK 0x42 /* Interrupt back */
+#define C_CM_SET_BREAK 0x43 /* Tx break on */
+#define C_CM_CLR_BREAK 0x44 /* Tx break off */
+#define C_CM_CMD_DONE 0x45 /* Previous command done */
+#define C_CM_INTBACK2 0x46 /* Alternate Interrupt back */
+#define C_CM_TINACT 0x51 /* set inactivity detection */
+#define C_CM_IRQ_ENBL 0x52 /* enable generation of interrupts */
+#define C_CM_IRQ_DSBL 0x53 /* disable generation of interrupts */
+#define C_CM_ACK_ENBL 0x54 /* enable acknowledged interrupt mode */
+#define C_CM_ACK_DSBL 0x55 /* disable acknowledged intr mode */
+#define C_CM_FLUSH_RX 0x56 /* flushes Rx buffer */
+#define C_CM_FLUSH_TX 0x57 /* flushes Tx buffer */
+#define C_CM_Q_ENABLE 0x58 /* enables queue access from the
+ driver */
+#define C_CM_Q_DISABLE 0x59 /* disables queue access from the
+ driver */
+
+#define C_CM_TXBEMPTY 0x60 /* Tx buffer is empty */
+#define C_CM_TXLOWWM 0x61 /* Tx buffer low water mark */
+#define C_CM_RXHIWM 0x62 /* Rx buffer high water mark */
+#define C_CM_RXNNDT 0x63 /* rx no new data timeout */
+#define C_CM_TXFEMPTY 0x64
+#define C_CM_ICHAR 0x65
+#define C_CM_MDCD 0x70 /* modem DCD change */
+#define C_CM_MDSR 0x71 /* modem DSR change */
+#define C_CM_MRI 0x72 /* modem RI change */
+#define C_CM_MCTS 0x73 /* modem CTS change */
+#define C_CM_MRTS 0x74 /* modem RTS drop */
+#define C_CM_RXBRK 0x84 /* Break received */
+#define C_CM_PR_ERROR 0x85 /* Parity error */
+#define C_CM_FR_ERROR 0x86 /* Frame error */
+#define C_CM_OVR_ERROR 0x87 /* Overrun error */
+#define C_CM_RXOFL 0x88 /* RX buffer overflow */
+#define C_CM_CMDERROR 0x90 /* command error */
+#define C_CM_FATAL 0x91 /* fatal error */
+#define C_CM_HW_RESET 0x92 /* reset board */
+
+/*
+ * CH_CTRL - This per port structure contains all parameters
+ * that control an specific port. It can be seen as the
+ * configuration registers of a "super-serial-controller".
+ */
+
+struct CH_CTRL {
+ uclong op_mode; /* operation mode */
+ uclong intr_enable; /* interrupt masking */
+ uclong sw_flow; /* SW flow control */
+ uclong flow_status; /* output flow status */
+ uclong comm_baud; /* baud rate - numerically specified */
+ uclong comm_parity; /* parity */
+ uclong comm_data_l; /* data length/stop */
+ uclong comm_flags; /* other flags */
+ uclong hw_flow; /* HW flow control */
+ uclong rs_control; /* RS-232 outputs */
+ uclong rs_status; /* RS-232 inputs */
+ uclong flow_xon; /* xon char */
+ uclong flow_xoff; /* xoff char */
+ uclong hw_overflow; /* hw overflow counter */
+ uclong sw_overflow; /* sw overflow counter */
+ uclong comm_error; /* frame/parity error counter */
+ uclong ichar;
+ uclong filler[7];
+};
+
+
+/*
+ * BUF_CTRL - This per channel structure contains
+ * all Tx and Rx buffer control for a given channel.
+ */
+
+struct BUF_CTRL {
+ uclong flag_dma; /* buffers are in Host memory */
+ uclong tx_bufaddr; /* address of the tx buffer */
+ uclong tx_bufsize; /* tx buffer size */
+ uclong tx_threshold; /* tx low water mark */
+ uclong tx_get; /* tail index tx buf */
+ uclong tx_put; /* head index tx buf */
+ uclong rx_bufaddr; /* address of the rx buffer */
+ uclong rx_bufsize; /* rx buffer size */
+ uclong rx_threshold; /* rx high water mark */
+ uclong rx_get; /* tail index rx buf */
+ uclong rx_put; /* head index rx buf */
+ uclong filler[5]; /* filler to align structures */
+};
+
+/*
+ * BOARD_CTRL - This per board structure contains all global
+ * control fields related to the board.
+ */
+
+struct BOARD_CTRL {
+
+ /* static info provided by the on-board CPU */
+ uclong n_channel; /* number of channels */
+ uclong fw_version; /* firmware version */
+
+ /* static info provided by the driver */
+ uclong op_system; /* op_system id */
+ uclong dr_version; /* driver version */
+
+ /* board control area */
+ uclong inactivity; /* inactivity control */
+
+ /* host to FW commands */
+ uclong hcmd_channel; /* channel number */
+ uclong hcmd_param; /* pointer to parameters */
+
+ /* FW to Host commands */
+ uclong fwcmd_channel; /* channel number */
+ uclong fwcmd_param; /* pointer to parameters */
+ uclong zf_int_queue_addr; /* offset for INT_QUEUE structure */
+
+ /* filler so the structures are aligned */
+ uclong filler[6];
+};
+
+/* Host Interrupt Queue */
+
+#define QUEUE_SIZE (10*MAX_CHAN)
+
+struct INT_QUEUE {
+ unsigned char intr_code[QUEUE_SIZE];
+ unsigned long channel[QUEUE_SIZE];
+ unsigned long param[QUEUE_SIZE];
+ unsigned long put;
+ unsigned long get;
+};
+
+/*
+ * ZFW_CTRL - This is the data structure that includes all other
+ * data structures used by the Firmware.
+ */
+
+struct ZFW_CTRL {
+ struct BOARD_CTRL board_ctrl;
+ struct CH_CTRL ch_ctrl[MAX_CHAN];
+ struct BUF_CTRL buf_ctrl[MAX_CHAN];
+};
+
+/****************** ****************** *******************/
+#endif
+
+/* Per card data structure */
+struct resource;
+struct cyclades_card {
+ unsigned long base_phys;
+ unsigned long ctl_phys;
+ void __iomem *base_addr;
+ void __iomem *ctl_addr;
+ int irq;
+ int num_chips; /* 0 if card absent, -1 if Z/PCI, else Y */
+ int first_line; /* minor number of first channel on card */
+ int nports; /* Number of ports in the card */
+ int bus_index; /* address shift - 0 for ISA, 1 for PCI */
+ int intr_enabled; /* FW Interrupt flag - 0 disabled, 1 enabled */
+ struct pci_dev *pdev;
+#ifdef __KERNEL__
+ spinlock_t card_lock;
+#else
+ unsigned long filler;
+#endif
+};
+
+struct cyclades_chip {
+ int filler;
+};
+
+
+#ifdef __KERNEL__
+
+/***************************************
+ * Memory access functions/macros *
+ * (required to support Alpha systems) *
+ ***************************************/
+
+#define cy_writeb(port,val) {writeb((val),(port)); mb();}
+#define cy_writew(port,val) {writew((val),(port)); mb();}
+#define cy_writel(port,val) {writel((val),(port)); mb();}
+
+#define cy_readb(port) readb(port)
+#define cy_readw(port) readw(port)
+#define cy_readl(port) readl(port)
+
+/*
+ * Statistics counters
+ */
+struct cyclades_icount {
+ __u32 cts, dsr, rng, dcd, tx, rx;
+ __u32 frame, parity, overrun, brk;
+ __u32 buf_overrun;
+};
+
+/*
+ * This is our internal structure for each serial port's state.
+ *
+ * Many fields are paralleled by the structure used by the serial_struct
+ * structure.
+ *
+ * For definitions of the flags field, see tty.h
+ */
+
+struct cyclades_port {
+ int magic;
+ int card;
+ int line;
+ int flags; /* defined in tty.h */
+ int type; /* UART type */
+ struct tty_struct *tty;
+ int read_status_mask;
+ int ignore_status_mask;
+ int timeout;
+ int xmit_fifo_size;
+ int cor1,cor2,cor3,cor4,cor5;
+ int tbpr,tco,rbpr,rco;
+ int baud;
+ int rflow;
+ int rtsdtr_inv;
+ int chip_rev;
+ int custom_divisor;
+ int x_char; /* to be pushed out ASAP */
+ int close_delay;
+ unsigned short closing_wait;
+ unsigned long event;
+ unsigned long last_active;
+ int count; /* # of fd on device */
+ int breakon;
+ int breakoff;
+ int blocked_open; /* # of blocked opens */
+ unsigned char *xmit_buf;
+ int xmit_head;
+ int xmit_tail;
+ int xmit_cnt;
+ int default_threshold;
+ int default_timeout;
+ unsigned long jiffies[3];
+ unsigned long rflush_count;
+ struct cyclades_monitor mon;
+ struct cyclades_idle_stats idle_stats;
+ struct cyclades_icount icount;
+ struct work_struct tqueue;
+ wait_queue_head_t open_wait;
+ wait_queue_head_t close_wait;
+ wait_queue_head_t shutdown_wait;
+ wait_queue_head_t delta_msr_wait;
+ int throttle;
+};
+
+/*
+ * Events are used to schedule things to happen at timer-interrupt
+ * time, instead of at cy interrupt time.
+ */
+#define Cy_EVENT_READ_PROCESS 0
+#define Cy_EVENT_WRITE_WAKEUP 1
+#define Cy_EVENT_HANGUP 2
+#define Cy_EVENT_BREAK 3
+#define Cy_EVENT_OPEN_WAKEUP 4
+#define Cy_EVENT_SHUTDOWN_WAKEUP 5
+#define Cy_EVENT_DELTA_WAKEUP 6
+#define Cy_EVENT_Z_RX_FULL 7
+
+#define CLOSING_WAIT_DELAY 30*HZ
+#define CY_CLOSING_WAIT_NONE 65535
+#define CY_CLOSING_WAIT_INF 0
+
+
+#define CyMAX_CHIPS_PER_CARD 8
+#define CyMAX_CHAR_FIFO 12
+#define CyPORTS_PER_CHIP 4
+#define CD1400_MAX_SPEED 115200
+
+#define CyISA_Ywin 0x2000
+
+#define CyPCI_Ywin 0x4000
+#define CyPCI_Yctl 0x80
+#define CyPCI_Zctl CTRL_WINDOW_SIZE
+#define CyPCI_Zwin 0x80000
+#define CyPCI_Ze_win (2 * CyPCI_Zwin)
+
+#define PCI_DEVICE_ID_MASK 0x06
+
+/**** CD1400 registers ****/
+
+#define CD1400_REV_G 0x46
+#define CD1400_REV_J 0x48
+
+#define CyRegSize 0x0400
+#define Cy_HwReset 0x1400
+#define Cy_ClrIntr 0x1800
+#define Cy_EpldRev 0x1e00
+
+/* Global Registers */
+
+#define CyGFRCR (0x40*2)
+#define CyRevE (44)
+#define CyCAR (0x68*2)
+#define CyCHAN_0 (0x00)
+#define CyCHAN_1 (0x01)
+#define CyCHAN_2 (0x02)
+#define CyCHAN_3 (0x03)
+#define CyGCR (0x4B*2)
+#define CyCH0_SERIAL (0x00)
+#define CyCH0_PARALLEL (0x80)
+#define CySVRR (0x67*2)
+#define CySRModem (0x04)
+#define CySRTransmit (0x02)
+#define CySRReceive (0x01)
+#define CyRICR (0x44*2)
+#define CyTICR (0x45*2)
+#define CyMICR (0x46*2)
+#define CyICR0 (0x00)
+#define CyICR1 (0x01)
+#define CyICR2 (0x02)
+#define CyICR3 (0x03)
+#define CyRIR (0x6B*2)
+#define CyTIR (0x6A*2)
+#define CyMIR (0x69*2)
+#define CyIRDirEq (0x80)
+#define CyIRBusy (0x40)
+#define CyIRUnfair (0x20)
+#define CyIRContext (0x1C)
+#define CyIRChannel (0x03)
+#define CyPPR (0x7E*2)
+#define CyCLOCK_20_1MS (0x27)
+#define CyCLOCK_25_1MS (0x31)
+#define CyCLOCK_25_5MS (0xf4)
+#define CyCLOCK_60_1MS (0x75)
+#define CyCLOCK_60_2MS (0xea)
+
+/* Virtual Registers */
+
+#define CyRIVR (0x43*2)
+#define CyTIVR (0x42*2)
+#define CyMIVR (0x41*2)
+#define CyIVRMask (0x07)
+#define CyIVRRxEx (0x07)
+#define CyIVRRxOK (0x03)
+#define CyIVRTxOK (0x02)
+#define CyIVRMdmOK (0x01)
+#define CyTDR (0x63*2)
+#define CyRDSR (0x62*2)
+#define CyTIMEOUT (0x80)
+#define CySPECHAR (0x70)
+#define CyBREAK (0x08)
+#define CyPARITY (0x04)
+#define CyFRAME (0x02)
+#define CyOVERRUN (0x01)
+#define CyMISR (0x4C*2)
+/* see CyMCOR_ and CyMSVR_ for bits*/
+#define CyEOSRR (0x60*2)
+
+/* Channel Registers */
+
+#define CyLIVR (0x18*2)
+#define CyMscsr (0x01)
+#define CyTdsr (0x02)
+#define CyRgdsr (0x03)
+#define CyRedsr (0x07)
+#define CyCCR (0x05*2)
+/* Format 1 */
+#define CyCHAN_RESET (0x80)
+#define CyCHIP_RESET (0x81)
+#define CyFlushTransFIFO (0x82)
+/* Format 2 */
+#define CyCOR_CHANGE (0x40)
+#define CyCOR1ch (0x02)
+#define CyCOR2ch (0x04)
+#define CyCOR3ch (0x08)
+/* Format 3 */
+#define CySEND_SPEC_1 (0x21)
+#define CySEND_SPEC_2 (0x22)
+#define CySEND_SPEC_3 (0x23)
+#define CySEND_SPEC_4 (0x24)
+/* Format 4 */
+#define CyCHAN_CTL (0x10)
+#define CyDIS_RCVR (0x01)
+#define CyENB_RCVR (0x02)
+#define CyDIS_XMTR (0x04)
+#define CyENB_XMTR (0x08)
+#define CySRER (0x06*2)
+#define CyMdmCh (0x80)
+#define CyRxData (0x10)
+#define CyTxRdy (0x04)
+#define CyTxMpty (0x02)
+#define CyNNDT (0x01)
+#define CyCOR1 (0x08*2)
+#define CyPARITY_NONE (0x00)
+#define CyPARITY_0 (0x20)
+#define CyPARITY_1 (0xA0)
+#define CyPARITY_E (0x40)
+#define CyPARITY_O (0xC0)
+#define Cy_1_STOP (0x00)
+#define Cy_1_5_STOP (0x04)
+#define Cy_2_STOP (0x08)
+#define Cy_5_BITS (0x00)
+#define Cy_6_BITS (0x01)
+#define Cy_7_BITS (0x02)
+#define Cy_8_BITS (0x03)
+#define CyCOR2 (0x09*2)
+#define CyIXM (0x80)
+#define CyTxIBE (0x40)
+#define CyETC (0x20)
+#define CyAUTO_TXFL (0x60)
+#define CyLLM (0x10)
+#define CyRLM (0x08)
+#define CyRtsAO (0x04)
+#define CyCtsAE (0x02)
+#define CyDsrAE (0x01)
+#define CyCOR3 (0x0A*2)
+#define CySPL_CH_DRANGE (0x80) /* special character detect range */
+#define CySPL_CH_DET1 (0x40) /* enable special character detection
+ on SCHR4-SCHR3 */
+#define CyFL_CTRL_TRNSP (0x20) /* Flow Control Transparency */
+#define CySPL_CH_DET2 (0x10) /* Enable special character detection
+ on SCHR2-SCHR1 */
+#define CyREC_FIFO (0x0F) /* Receive FIFO threshold */
+#define CyCOR4 (0x1E*2)
+#define CyCOR5 (0x1F*2)
+#define CyCCSR (0x0B*2)
+#define CyRxEN (0x80)
+#define CyRxFloff (0x40)
+#define CyRxFlon (0x20)
+#define CyTxEN (0x08)
+#define CyTxFloff (0x04)
+#define CyTxFlon (0x02)
+#define CyRDCR (0x0E*2)
+#define CySCHR1 (0x1A*2)
+#define CySCHR2 (0x1B*2)
+#define CySCHR3 (0x1C*2)
+#define CySCHR4 (0x1D*2)
+#define CySCRL (0x22*2)
+#define CySCRH (0x23*2)
+#define CyLNC (0x24*2)
+#define CyMCOR1 (0x15*2)
+#define CyMCOR2 (0x16*2)
+#define CyRTPR (0x21*2)
+#define CyMSVR1 (0x6C*2)
+#define CyMSVR2 (0x6D*2)
+#define CyANY_DELTA (0xF0)
+#define CyDSR (0x80)
+#define CyCTS (0x40)
+#define CyRI (0x20)
+#define CyDCD (0x10)
+#define CyDTR (0x02)
+#define CyRTS (0x01)
+#define CyPVSR (0x6F*2)
+#define CyRBPR (0x78*2)
+#define CyRCOR (0x7C*2)
+#define CyTBPR (0x72*2)
+#define CyTCOR (0x76*2)
+
+/* Custom Registers */
+
+#define CyPLX_VER (0x3400)
+#define PLX_9050 0x0b
+#define PLX_9060 0x0c
+#define PLX_9080 0x0d
+
+/***************************************************************************/
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_CYCLADES_H */