mmc: sdhci: changing sdhci quirks data type to u64

Kernel 3.1 has more than 32 quirks
changing quirks type to u64

Bug 921653

Change-Id: Id6607347e6e48cfa1534f1260e277f6e2f7a42ee
Signed-off-by: naveenk <naveenk@nvidia.com>
Reviewed-on: http://git-master/r/73167
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Pavan Kunapuli <pkunapuli@nvidia.com>
Reviewed-by: Varun Wadekar <vwadekar@nvidia.com>

1 files changed, 34 insertions, 34 deletions

diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index 0c7b5869813b..85e7850b88af 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -21,74 +21,74 @@ struct sdhci_host {
 	/* Data set by hardware interface driver */
 	const char *hw_name;	/* Hardware bus name */
 
-	unsigned int quirks;	/* Deviations from spec. */
+	u64 quirks;	/* Deviations from spec. */
 
 /* Controller doesn't honor resets unless we touch the clock register */
-#define SDHCI_QUIRK_CLOCK_BEFORE_RESET			(1<<0)
+#define SDHCI_QUIRK_CLOCK_BEFORE_RESET			(1ULL<<0)
 /* Controller has bad caps bits, but really supports DMA */
-#define SDHCI_QUIRK_FORCE_DMA				(1<<1)
+#define SDHCI_QUIRK_FORCE_DMA				(1ULL<<1)
 /* Controller doesn't like to be reset when there is no card inserted. */
-#define SDHCI_QUIRK_NO_CARD_NO_RESET			(1<<2)
+#define SDHCI_QUIRK_NO_CARD_NO_RESET			(1ULL<<2)
 /* Controller doesn't like clearing the power reg before a change */
-#define SDHCI_QUIRK_SINGLE_POWER_WRITE			(1<<3)
+#define SDHCI_QUIRK_SINGLE_POWER_WRITE			(1ULL<<3)
 /* Controller has flaky internal state so reset it on each ios change */
-#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS		(1<<4)
+#define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS		(1ULL<<4)
 /* Controller has an unusable DMA engine */
-#define SDHCI_QUIRK_BROKEN_DMA				(1<<5)
+#define SDHCI_QUIRK_BROKEN_DMA				(1ULL<<5)
 /* Controller has an unusable ADMA engine */
-#define SDHCI_QUIRK_BROKEN_ADMA				(1<<6)
+#define SDHCI_QUIRK_BROKEN_ADMA				(1ULL<<6)
 /* Controller can only DMA from 32-bit aligned addresses */
-#define SDHCI_QUIRK_32BIT_DMA_ADDR			(1<<7)
+#define SDHCI_QUIRK_32BIT_DMA_ADDR			(1ULL<<7)
 /* Controller can only DMA chunk sizes that are a multiple of 32 bits */
-#define SDHCI_QUIRK_32BIT_DMA_SIZE			(1<<8)
+#define SDHCI_QUIRK_32BIT_DMA_SIZE			(1ULL<<8)
 /* Controller can only ADMA chunks that are a multiple of 32 bits */
-#define SDHCI_QUIRK_32BIT_ADMA_SIZE			(1<<9)
+#define SDHCI_QUIRK_32BIT_ADMA_SIZE			(1ULL<<9)
 /* Controller needs to be reset after each request to stay stable */
-#define SDHCI_QUIRK_RESET_AFTER_REQUEST			(1<<10)
+#define SDHCI_QUIRK_RESET_AFTER_REQUEST			(1ULL<<10)
 /* Controller needs voltage and power writes to happen separately */
-#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER		(1<<11)
+#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER		(1ULL<<11)
 /* Controller provides an incorrect timeout value for transfers */
-#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL			(1<<12)
+#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL			(1ULL<<12)
 /* Controller has an issue with buffer bits for small transfers */
-#define SDHCI_QUIRK_BROKEN_SMALL_PIO			(1<<13)
+#define SDHCI_QUIRK_BROKEN_SMALL_PIO			(1ULL<<13)
 /* Controller does not provide transfer-complete interrupt when not busy */
-#define SDHCI_QUIRK_NO_BUSY_IRQ				(1<<14)
+#define SDHCI_QUIRK_NO_BUSY_IRQ				(1ULL<<14)
 /* Controller has unreliable card detection */
-#define SDHCI_QUIRK_BROKEN_CARD_DETECTION		(1<<15)
+#define SDHCI_QUIRK_BROKEN_CARD_DETECTION		(1ULL<<15)
 /* Controller reports inverted write-protect state */
-#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT		(1<<16)
+#define SDHCI_QUIRK_INVERTED_WRITE_PROTECT		(1ULL<<16)
 /* Controller has nonstandard clock management */
-#define SDHCI_QUIRK_NONSTANDARD_CLOCK			(1<<17)
+#define SDHCI_QUIRK_NONSTANDARD_CLOCK			(1ULL<<17)
 /* Controller does not like fast PIO transfers */
-#define SDHCI_QUIRK_PIO_NEEDS_DELAY			(1<<18)
+#define SDHCI_QUIRK_PIO_NEEDS_DELAY			(1ULL<<18)
 /* Controller losing signal/interrupt enable states after reset */
-#define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET		(1<<19)
+#define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET		(1ULL<<19)
 /* Controller has to be forced to use block size of 2048 bytes */
-#define SDHCI_QUIRK_FORCE_BLK_SZ_2048			(1<<20)
+#define SDHCI_QUIRK_FORCE_BLK_SZ_2048			(1ULL<<20)
 /* Controller cannot do multi-block transfers */
-#define SDHCI_QUIRK_NO_MULTIBLOCK			(1<<21)
+#define SDHCI_QUIRK_NO_MULTIBLOCK			(1ULL<<21)
 /* Controller can only handle 1-bit data transfers */
-#define SDHCI_QUIRK_FORCE_1_BIT_DATA			(1<<22)
+#define SDHCI_QUIRK_FORCE_1_BIT_DATA			(1ULL<<22)
 /* Controller needs 10ms delay between applying power and clock */
-#define SDHCI_QUIRK_DELAY_AFTER_POWER			(1<<23)
+#define SDHCI_QUIRK_DELAY_AFTER_POWER			(1ULL<<23)
 /* Controller uses SDCLK instead of TMCLK for data timeouts */
-#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK		(1<<24)
+#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK		(1ULL<<24)
 /* Controller reports wrong base clock capability */
-#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN		(1<<25)
+#define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN		(1ULL<<25)
 /* Controller cannot support End Attribute in NOP ADMA descriptor */
-#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC		(1<<26)
+#define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC		(1ULL<<26)
 /* Controller is missing device caps. Use caps provided by host */
-#define SDHCI_QUIRK_MISSING_CAPS			(1<<27)
+#define SDHCI_QUIRK_MISSING_CAPS			(1ULL<<27)
 /* Controller uses Auto CMD12 command to stop the transfer */
-#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12		(1<<28)
+#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12		(1ULL<<28)
 /* Controller doesn't have HISPD bit field in HI-SPEED SD card */
-#define SDHCI_QUIRK_NO_HISPD_BIT			(1<<29)
+#define SDHCI_QUIRK_NO_HISPD_BIT			(1ULL<<29)
 /* Controller treats ADMA descriptors with length 0000h incorrectly */
-#define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC		(1<<30)
+#define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC		(1ULL<<30)
 /* The read-only detection via SDHCI_PRESENT_STATE register is unstable */
-#define SDHCI_QUIRK_UNSTABLE_RO_DETECT			(1<<31)
+#define SDHCI_QUIRK_UNSTABLE_RO_DETECT			(1ULL<<31)
 /* Controller cannot report the line status in present state register */
-#define SDHCI_QUIRK_NON_STD_VOLTAGE_SWITCHING		(1UL<<32)
+#define SDHCI_QUIRK_NON_STD_VOLTAGE_SWITCHING		(1ULL<<32)
 
 	int irq;		/* Device IRQ */
 	void __iomem *ioaddr;	/* Mapped address */