Merge branch 'linus' into perf/urgent

Merge reason: Include most of the merge window trees, to do fixes on top.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

109 files changed, 16699 insertions, 1223 deletions

diff --git a/tools/perf/Documentation/perf-annotate.txt b/tools/perf/Documentation/perf-annotate.txt
index 6f5a498608b2..85c5f026930d 100644
--- a/tools/perf/Documentation/perf-annotate.txt
+++ b/tools/perf/Documentation/perf-annotate.txt
@@ -66,6 +66,12 @@ OPTIONS
 	used. This interfaces starts by centering on the line with more
 	samples, TAB/UNTAB cycles through the lines with more samples.
 
+-c::
+--cpu:: Only report samples for the list of CPUs provided. Multiple CPUs can
+	be provided as a comma-separated list with no space: 0,1. Ranges of
+	CPUs are specified with -: 0-2. Default is to report samples on all
+	CPUs.
+
 SEE ALSO
 --------
 linkperf:perf-record[1], linkperf:perf-report[1]
diff --git a/tools/perf/Documentation/perf-probe.txt b/tools/perf/Documentation/perf-probe.txt
index 02bafce4b341..2780d9ce48bf 100644
--- a/tools/perf/Documentation/perf-probe.txt
+++ b/tools/perf/Documentation/perf-probe.txt
@@ -34,9 +34,11 @@ OPTIONS
 	Specify vmlinux path which has debuginfo (Dwarf binary).
 
 -m::
---module=MODNAME::
+--module=MODNAME|PATH::
 	Specify module name in which perf-probe searches probe points
-	or lines.
+	or lines. If a path of module file is passed, perf-probe
+	treat it as an offline module (this means you can add a probe on
+        a module which has not been loaded yet).
 
 -s::
 --source=PATH::
diff --git a/tools/perf/Documentation/perf-report.txt b/tools/perf/Documentation/perf-report.txt
index 8ba03d6e5398..04253c07d19a 100644
--- a/tools/perf/Documentation/perf-report.txt
+++ b/tools/perf/Documentation/perf-report.txt
@@ -80,15 +80,24 @@ OPTIONS
 --dump-raw-trace::
         Dump raw trace in ASCII.
 
--g [type,min]::
+-g [type,min,order]::
 --call-graph::
-        Display call chains using type and min percent threshold.
+        Display call chains using type, min percent threshold and order.
 	type can be either:
 	- flat: single column, linear exposure of call chains.
 	- graph: use a graph tree, displaying absolute overhead rates.
 	- fractal: like graph, but displays relative rates. Each branch of
 		 the tree is considered as a new profiled object. +
-	Default: fractal,0.5.
+
+	order can be either:
+	- callee: callee based call graph.
+	- caller: inverted caller based call graph.
+
+	Default: fractal,0.5,callee.
+
+-G::
+--inverted::
+        alias for inverted caller based call graph.
 
 --pretty=<key>::
         Pretty printing style.  key: normal, raw
@@ -119,6 +128,12 @@ OPTIONS
 --symfs=<directory>::
         Look for files with symbols relative to this directory.
 
+-c::
+--cpu:: Only report samples for the list of CPUs provided. Multiple CPUs can
+	be provided as a comma-separated list with no space: 0,1. Ranges of
+	CPUs are specified with -: 0-2. Default is to report samples on all
+	CPUs.
+
 SEE ALSO
 --------
 linkperf:perf-stat[1]
diff --git a/tools/perf/Documentation/perf-script.txt b/tools/perf/Documentation/perf-script.txt
index 86c87e214b11..db017867d9e8 100644
--- a/tools/perf/Documentation/perf-script.txt
+++ b/tools/perf/Documentation/perf-script.txt
@@ -115,10 +115,10 @@ OPTIONS
 -f::
 --fields::
         Comma separated list of fields to print. Options are:
-        comm, tid, pid, time, cpu, event, trace, sym. Field
-        list can be prepended with the type, trace, sw or hw,
+        comm, tid, pid, time, cpu, event, trace, ip, sym, dso, addr.
+        Field list can be prepended with the type, trace, sw or hw,
         to indicate to which event type the field list applies.
-        e.g., -f sw:comm,tid,time,sym  and -f trace:time,cpu,trace
+        e.g., -f sw:comm,tid,time,ip,sym  and -f trace:time,cpu,trace
 
 		perf script -f <fields>
 
@@ -132,17 +132,17 @@ OPTIONS
 	The arguments are processed in the order received. A later usage can
 	reset a prior request. e.g.:
     
-		-f trace: -f comm,tid,time,sym
+		-f trace: -f comm,tid,time,ip,sym
     
 	The first -f suppresses trace events (field list is ""), but then the
-	second invocation sets the fields to comm,tid,time,sym. In this case a
+	second invocation sets the fields to comm,tid,time,ip,sym. In this case a
 	warning is given to the user:
     
 		"Overriding previous field request for all events."
     
 	Alternativey, consider the order:
     
-		-f comm,tid,time,sym -f trace:
+		-f comm,tid,time,ip,sym -f trace:
     
 	The first -f sets the fields for all events and the second -f
 	suppresses trace events. The user is given a warning message about
@@ -182,6 +182,12 @@ OPTIONS
 --hide-call-graph::
         When printing symbols do not display call chain.
 
+-c::
+--cpu:: Only report samples for the list of CPUs provided. Multiple CPUs can
+	be provided as a comma-separated list with no space: 0,1. Ranges of
+	CPUs are specified with -: 0-2. Default is to report samples on all
+	CPUs.
+
 SEE ALSO
 --------
 linkperf:perf-record[1], linkperf:perf-script-perl[1],
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index c16836611d22..56d62d3fb167 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -282,6 +282,7 @@ LIB_H += util/thread.h
 LIB_H += util/thread_map.h
 LIB_H += util/trace-event.h
 LIB_H += util/probe-finder.h
+LIB_H += util/dwarf-aux.h
 LIB_H += util/probe-event.h
 LIB_H += util/pstack.h
 LIB_H += util/cpumap.h
@@ -438,6 +439,7 @@ else
 	BASIC_CFLAGS += -DDWARF_SUPPORT
 	EXTLIBS += -lelf -ldw
 	LIB_OBJS += $(OUTPUT)util/probe-finder.o
+	LIB_OBJS += $(OUTPUT)util/dwarf-aux.o
 endif # PERF_HAVE_DWARF_REGS
 endif # NO_DWARF
 
diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c
index 7b139e1e7e86..555aefd7fe01 100644
--- a/tools/perf/builtin-annotate.c
+++ b/tools/perf/builtin-annotate.c
@@ -28,6 +28,8 @@
 #include "util/hist.h"
 #include "util/session.h"
 
+#include <linux/bitmap.h>
+
 static char		const *input_name = "perf.data";
 
 static bool		force, use_tui, use_stdio;
@@ -38,6 +40,9 @@ static bool		print_line;
 
 static const char *sym_hist_filter;
 
+static const char	*cpu_list;
+static DECLARE_BITMAP(cpu_bitmap, MAX_NR_CPUS);
+
 static int perf_evlist__add_sample(struct perf_evlist *evlist,
 				   struct perf_sample *sample,
 				   struct perf_evsel *evsel,
@@ -90,6 +95,9 @@ static int process_sample_event(union perf_event *event,
 		return -1;
 	}
 
+	if (cpu_list && !test_bit(sample->cpu, cpu_bitmap))
+		return 0;
+
 	if (!al.filtered &&
 	    perf_evlist__add_sample(session->evlist, sample, evsel, &al)) {
 		pr_warning("problem incrementing symbol count, "
@@ -177,6 +185,12 @@ static int __cmd_annotate(void)
 	if (session == NULL)
 		return -ENOMEM;
 
+	if (cpu_list) {
+		ret = perf_session__cpu_bitmap(session, cpu_list, cpu_bitmap);
+		if (ret)
+			goto out_delete;
+	}
+
 	ret = perf_session__process_events(session, &event_ops);
 	if (ret)
 		goto out_delete;
@@ -252,6 +266,7 @@ static const struct option options[] = {
 		    "print matching source lines (may be slow)"),
 	OPT_BOOLEAN('P', "full-paths", &full_paths,
 		    "Don't shorten the displayed pathnames"),
+	OPT_STRING('c', "cpu", &cpu_list, "cpu", "list of cpus to profile"),
 	OPT_END()
 };
 
diff --git a/tools/perf/builtin-probe.c b/tools/perf/builtin-probe.c
index 2c0e64d0b4aa..5f2a5c7046df 100644
--- a/tools/perf/builtin-probe.c
+++ b/tools/perf/builtin-probe.c
@@ -242,7 +242,8 @@ static const struct option options[] = {
 	OPT_STRING('s', "source", &symbol_conf.source_prefix,
 		   "directory", "path to kernel source"),
 	OPT_STRING('m', "module", &params.target_module,
-		   "modname", "target module name"),
+		   "modname|path",
+		   "target module name (for online) or path (for offline)"),
 #endif
 	OPT__DRY_RUN(&probe_event_dry_run),
 	OPT_INTEGER('\0', "max-probes", &params.max_probe_points,
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 8e2c85798185..80dc5b790e47 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -740,7 +740,7 @@ static bool force, append_file;
 const struct option record_options[] = {
 	OPT_CALLBACK('e', "event", &evsel_list, "event",
 		     "event selector. use 'perf list' to list available events",
-		     parse_events),
+		     parse_events_option),
 	OPT_CALLBACK(0, "filter", &evsel_list, "filter",
 		     "event filter", parse_filter),
 	OPT_INTEGER('p', "pid", &target_pid,
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index 287a173523a7..f854efda7686 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -33,6 +33,8 @@
 #include "util/sort.h"
 #include "util/hist.h"
 
+#include <linux/bitmap.h>
+
 static char		const *input_name = "perf.data";
 
 static bool		force, use_tui, use_stdio;
@@ -45,9 +47,13 @@ static struct perf_read_values	show_threads_values;
 static const char	default_pretty_printing_style[] = "normal";
 static const char	*pretty_printing_style = default_pretty_printing_style;
 
-static char		callchain_default_opt[] = "fractal,0.5";
+static char		callchain_default_opt[] = "fractal,0.5,callee";
+static bool		inverted_callchain;
 static symbol_filter_t	annotate_init;
 
+static const char	*cpu_list;
+static DECLARE_BITMAP(cpu_bitmap, MAX_NR_CPUS);
+
 static int perf_session__add_hist_entry(struct perf_session *session,
 					struct addr_location *al,
 					struct perf_sample *sample,
@@ -116,6 +122,9 @@ static int process_sample_event(union perf_event *event,
 	if (al.filtered || (hide_unresolved && al.sym == NULL))
 		return 0;
 
+	if (cpu_list && !test_bit(sample->cpu, cpu_bitmap))
+		return 0;
+
 	if (al.map != NULL)
 		al.map->dso->hit = 1;
 
@@ -262,6 +271,12 @@ static int __cmd_report(void)
 	if (session == NULL)
 		return -ENOMEM;
 
+	if (cpu_list) {
+		ret = perf_session__cpu_bitmap(session, cpu_list, cpu_bitmap);
+		if (ret)
+			goto out_delete;
+	}
+
 	if (show_threads)
 		perf_read_values_init(&show_threads_values);
 
@@ -386,13 +401,29 @@ parse_callchain_opt(const struct option *opt __used, const char *arg,
 	if (!tok)
 		goto setup;
 
-	tok2 = strtok(NULL, ",");
 	callchain_param.min_percent = strtod(tok, &endptr);
 	if (tok == endptr)
 		return -1;
 
-	if (tok2)
+	/* get the print limit */
+	tok2 = strtok(NULL, ",");
+	if (!tok2)
+		goto setup;
+
+	if (tok2[0] != 'c') {
 		callchain_param.print_limit = strtod(tok2, &endptr);
+		tok2 = strtok(NULL, ",");
+		if (!tok2)
+			goto setup;
+	}
+
+	/* get the call chain order */
+	if (!strcmp(tok2, "caller"))
+		callchain_param.order = ORDER_CALLER;
+	else if (!strcmp(tok2, "callee"))
+		callchain_param.order = ORDER_CALLEE;
+	else
+		return -1;
 setup:
 	if (callchain_register_param(&callchain_param) < 0) {
 		fprintf(stderr, "Can't register callchain params\n");
@@ -436,9 +467,10 @@ static const struct option options[] = {
 		   "regex filter to identify parent, see: '--sort parent'"),
 	OPT_BOOLEAN('x', "exclude-other", &symbol_conf.exclude_other,
 		    "Only display entries with parent-match"),
-	OPT_CALLBACK_DEFAULT('g', "call-graph", NULL, "output_type,min_percent",
-		     "Display callchains using output_type (graph, flat, fractal, or none) and min percent threshold. "
-		     "Default: fractal,0.5", &parse_callchain_opt, callchain_default_opt),
+	OPT_CALLBACK_DEFAULT('g', "call-graph", NULL, "output_type,min_percent, call_order",
+		     "Display callchains using output_type (graph, flat, fractal, or none) , min percent threshold and callchain order. "
+		     "Default: fractal,0.5,callee", &parse_callchain_opt, callchain_default_opt),
+	OPT_BOOLEAN('G', "inverted", &inverted_callchain, "alias for inverted call graph"),
 	OPT_STRING('d', "dsos", &symbol_conf.dso_list_str, "dso[,dso...]",
 		   "only consider symbols in these dsos"),
 	OPT_STRING('C', "comms", &symbol_conf.comm_list_str, "comm[,comm...]",
@@ -455,6 +487,7 @@ static const struct option options[] = {
 		    "Only display entries resolved to a symbol"),
 	OPT_STRING(0, "symfs", &symbol_conf.symfs, "directory",
 		    "Look for files with symbols relative to this directory"),
+	OPT_STRING('c', "cpu", &cpu_list, "cpu", "list of cpus to profile"),
 	OPT_END()
 };
 
@@ -467,6 +500,9 @@ int cmd_report(int argc, const char **argv, const char *prefix __used)
 	else if (use_tui)
 		use_browser = 1;
 
+	if (inverted_callchain)
+		callchain_param.order = ORDER_CALLER;
+
 	if (strcmp(input_name, "-") != 0)
 		setup_browser(true);
 	else
@@ -504,7 +540,14 @@ int cmd_report(int argc, const char **argv, const char *prefix __used)
 	if (parent_pattern != default_parent_pattern) {
 		if (sort_dimension__add("parent") < 0)
 			return -1;
-		sort_parent.elide = 1;
+
+		/*
+		 * Only show the parent fields if we explicitly
+		 * sort that way. If we only use parent machinery
+		 * for filtering, we don't want it.
+		 */
+		if (!strstr(sort_order, "parent"))
+			sort_parent.elide = 1;
 	} else
 		symbol_conf.exclude_other = false;
 
diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c
index 22747de7234b..09024ec2ab2e 100644
--- a/tools/perf/builtin-script.c
+++ b/tools/perf/builtin-script.c
@@ -13,6 +13,7 @@
 #include "util/util.h"
 #include "util/evlist.h"
 #include "util/evsel.h"
+#include <linux/bitmap.h>
 
 static char const		*script_name;
 static char const		*generate_script_lang;
@@ -21,6 +22,8 @@ static u64			last_timestamp;
 static u64			nr_unordered;
 extern const struct option	record_options[];
 static bool			no_callchain;
+static const char		*cpu_list;
+static DECLARE_BITMAP(cpu_bitmap, MAX_NR_CPUS);
 
 enum perf_output_field {
 	PERF_OUTPUT_COMM            = 1U << 0,
@@ -30,7 +33,10 @@ enum perf_output_field {
 	PERF_OUTPUT_CPU             = 1U << 4,
 	PERF_OUTPUT_EVNAME          = 1U << 5,
 	PERF_OUTPUT_TRACE           = 1U << 6,
-	PERF_OUTPUT_SYM             = 1U << 7,
+	PERF_OUTPUT_IP              = 1U << 7,
+	PERF_OUTPUT_SYM             = 1U << 8,
+	PERF_OUTPUT_DSO             = 1U << 9,
+	PERF_OUTPUT_ADDR            = 1U << 10,
 };
 
 struct output_option {
@@ -44,7 +50,10 @@ struct output_option {
 	{.str = "cpu",   .field = PERF_OUTPUT_CPU},
 	{.str = "event", .field = PERF_OUTPUT_EVNAME},
 	{.str = "trace", .field = PERF_OUTPUT_TRACE},
+	{.str = "ip",    .field = PERF_OUTPUT_IP},
 	{.str = "sym",   .field = PERF_OUTPUT_SYM},
+	{.str = "dso",   .field = PERF_OUTPUT_DSO},
+	{.str = "addr",  .field = PERF_OUTPUT_ADDR},
 };
 
 /* default set to maintain compatibility with current format */
@@ -60,7 +69,8 @@ static struct {
 
 		.fields = PERF_OUTPUT_COMM | PERF_OUTPUT_TID |
 			      PERF_OUTPUT_CPU | PERF_OUTPUT_TIME |
-			      PERF_OUTPUT_EVNAME | PERF_OUTPUT_SYM,
+			      PERF_OUTPUT_EVNAME | PERF_OUTPUT_IP |
+				  PERF_OUTPUT_SYM | PERF_OUTPUT_DSO,
 
 		.invalid_fields = PERF_OUTPUT_TRACE,
 	},
@@ -70,7 +80,8 @@ static struct {
 
 		.fields = PERF_OUTPUT_COMM | PERF_OUTPUT_TID |
 			      PERF_OUTPUT_CPU | PERF_OUTPUT_TIME |
-			      PERF_OUTPUT_EVNAME | PERF_OUTPUT_SYM,
+			      PERF_OUTPUT_EVNAME | PERF_OUTPUT_IP |
+				  PERF_OUTPUT_SYM | PERF_OUTPUT_DSO,
 
 		.invalid_fields = PERF_OUTPUT_TRACE,
 	},
@@ -88,7 +99,8 @@ static struct {
 
 		.fields = PERF_OUTPUT_COMM | PERF_OUTPUT_TID |
 			      PERF_OUTPUT_CPU | PERF_OUTPUT_TIME |
-			      PERF_OUTPUT_EVNAME | PERF_OUTPUT_SYM,
+			      PERF_OUTPUT_EVNAME | PERF_OUTPUT_IP |
+				  PERF_OUTPUT_SYM | PERF_OUTPUT_DSO,
 
 		.invalid_fields = PERF_OUTPUT_TRACE,
 	},
@@ -157,9 +169,9 @@ static int perf_evsel__check_attr(struct perf_evsel *evsel,
 		!perf_session__has_traces(session, "record -R"))
 		return -EINVAL;
 
-	if (PRINT_FIELD(SYM)) {
+	if (PRINT_FIELD(IP)) {
 		if (perf_event_attr__check_stype(attr, PERF_SAMPLE_IP, "IP",
-					   PERF_OUTPUT_SYM))
+					   PERF_OUTPUT_IP))
 			return -EINVAL;
 
 		if (!no_callchain &&
@@ -167,6 +179,24 @@ static int perf_evsel__check_attr(struct perf_evsel *evsel,
 			symbol_conf.use_callchain = false;
 	}
 
+	if (PRINT_FIELD(ADDR) &&
+		perf_event_attr__check_stype(attr, PERF_SAMPLE_ADDR, "ADDR",
+				       PERF_OUTPUT_ADDR))
+		return -EINVAL;
+
+	if (PRINT_FIELD(SYM) && !PRINT_FIELD(IP) && !PRINT_FIELD(ADDR)) {
+		pr_err("Display of symbols requested but neither sample IP nor "
+			   "sample address\nis selected. Hence, no addresses to convert "
+		       "to symbols.\n");
+		return -EINVAL;
+	}
+	if (PRINT_FIELD(DSO) && !PRINT_FIELD(IP) && !PRINT_FIELD(ADDR)) {
+		pr_err("Display of DSO requested but neither sample IP nor "
+			   "sample address\nis selected. Hence, no addresses to convert "
+		       "to DSO.\n");
+		return -EINVAL;
+	}
+
 	if ((PRINT_FIELD(PID) || PRINT_FIELD(TID)) &&
 		perf_event_attr__check_stype(attr, PERF_SAMPLE_TID, "TID",
 				       PERF_OUTPUT_TID|PERF_OUTPUT_PID))
@@ -230,7 +260,7 @@ static void print_sample_start(struct perf_sample *sample,
 	if (PRINT_FIELD(COMM)) {
 		if (latency_format)
 			printf("%8.8s ", thread->comm);
-		else if (PRINT_FIELD(SYM) && symbol_conf.use_callchain)
+		else if (PRINT_FIELD(IP) && symbol_conf.use_callchain)
 			printf("%s ", thread->comm);
 		else
 			printf("%16s ", thread->comm);
@@ -271,6 +301,63 @@ static void print_sample_start(struct perf_sample *sample,
 	}
 }
 
+static bool sample_addr_correlates_sym(struct perf_event_attr *attr)
+{
+	if ((attr->type == PERF_TYPE_SOFTWARE) &&
+	    ((attr->config == PERF_COUNT_SW_PAGE_FAULTS) ||
+	     (attr->config == PERF_COUNT_SW_PAGE_FAULTS_MIN) ||
+	     (attr->config == PERF_COUNT_SW_PAGE_FAULTS_MAJ)))
+		return true;
+
+	return false;
+}
+
+static void print_sample_addr(union perf_event *event,
+			  struct perf_sample *sample,
+			  struct perf_session *session,
+			  struct thread *thread,
+			  struct perf_event_attr *attr)
+{
+	struct addr_location al;
+	u8 cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK;
+	const char *symname, *dsoname;
+
+	printf("%16" PRIx64, sample->addr);
+
+	if (!sample_addr_correlates_sym(attr))
+		return;
+
+	thread__find_addr_map(thread, session, cpumode, MAP__FUNCTION,
+			      event->ip.pid, sample->addr, &al);
+	if (!al.map)
+		thread__find_addr_map(thread, session, cpumode, MAP__VARIABLE,
+				      event->ip.pid, sample->addr, &al);
+
+	al.cpu = sample->cpu;
+	al.sym = NULL;
+
+	if (al.map)
+		al.sym = map__find_symbol(al.map, al.addr, NULL);
+
+	if (PRINT_FIELD(SYM)) {
+		if (al.sym && al.sym->name)
+			symname = al.sym->name;
+		else
+			symname = "";
+
+		printf(" %16s", symname);
+	}
+
+	if (PRINT_FIELD(DSO)) {
+		if (al.map && al.map->dso && al.map->dso->name)
+			dsoname = al.map->dso->name;
+		else
+			dsoname = "";
+
+		printf(" (%s)", dsoname);
+	}
+}
+
 static void process_event(union perf_event *event __unused,
 			  struct perf_sample *sample,
 			  struct perf_evsel *evsel,
@@ -288,12 +375,16 @@ static void process_event(union perf_event *event __unused,
 		print_trace_event(sample->cpu, sample->raw_data,
 				  sample->raw_size);
 
-	if (PRINT_FIELD(SYM)) {
+	if (PRINT_FIELD(ADDR))
+		print_sample_addr(event, sample, session, thread, attr);
+
+	if (PRINT_FIELD(IP)) {
 		if (!symbol_conf.use_callchain)
 			printf(" ");
 		else
 			printf("\n");
-		perf_session__print_symbols(event, sample, session);
+		perf_session__print_ip(event, sample, session,
+					      PRINT_FIELD(SYM), PRINT_FIELD(DSO));
 	}
 
 	printf("\n");
@@ -365,6 +456,10 @@ static int process_sample_event(union perf_event *event,
 		last_timestamp = sample->time;
 		return 0;
 	}
+
+	if (cpu_list && !test_bit(sample->cpu, cpu_bitmap))
+		return 0;
+
 	scripting_ops->process_event(event, sample, evsel, session, thread);
 
 	session->hists.stats.total_period += sample->period;
@@ -985,8 +1080,9 @@ static const struct option options[] = {
 	OPT_STRING(0, "symfs", &symbol_conf.symfs, "directory",
 		    "Look for files with symbols relative to this directory"),
 	OPT_CALLBACK('f', "fields", NULL, "str",
-		     "comma separated output fields prepend with 'type:'. Valid types: hw,sw,trace,raw. Fields: comm,tid,pid,time,cpu,event,trace,sym",
+		     "comma separated output fields prepend with 'type:'. Valid types: hw,sw,trace,raw. Fields: comm,tid,pid,time,cpu,event,trace,ip,sym,dso,addr",
 		     parse_output_fields),
+	OPT_STRING('c', "cpu", &cpu_list, "cpu", "list of cpus to profile"),
 
 	OPT_END()
 };
@@ -1167,6 +1263,11 @@ int cmd_script(int argc, const char **argv, const char *prefix __used)
 	if (session == NULL)
 		return -ENOMEM;
 
+	if (cpu_list) {
+		if (perf_session__cpu_bitmap(session, cpu_list, cpu_bitmap))
+			return -1;
+	}
+
 	if (!no_callchain)
 		symbol_conf.use_callchain = true;
 	else
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index a9f06715e44d..1ad04ce29c34 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -61,6 +61,8 @@
 #include <locale.h>
 
 #define DEFAULT_SEPARATOR	" "
+#define CNTR_NOT_SUPPORTED	"<not supported>"
+#define CNTR_NOT_COUNTED	"<not counted>"
 
 static struct perf_event_attr default_attrs[] = {
 
@@ -448,6 +450,7 @@ static int run_perf_stat(int argc __used, const char **argv)
 				if (verbose)
 					ui__warning("%s event is not supported by the kernel.\n",
 						    event_name(counter));
+				counter->supported = false;
 				continue;
 			}
 
@@ -466,6 +469,7 @@ static int run_perf_stat(int argc __used, const char **argv)
 			die("Not all events could be opened.\n");
 			return -1;
 		}
+		counter->supported = true;
 	}
 
 	if (perf_evlist__set_filters(evsel_list)) {
@@ -513,7 +517,10 @@ static void print_noise_pct(double total, double avg)
 	if (avg)
 		pct = 100.0*total/avg;
 
-	fprintf(stderr, "  ( +-%6.2f%% )", pct);
+	if (csv_output)
+		fprintf(stderr, "%s%.2f%%", csv_sep, pct);
+	else
+		fprintf(stderr, "  ( +-%6.2f%% )", pct);
 }
 
 static void print_noise(struct perf_evsel *evsel, double avg)
@@ -861,7 +868,7 @@ static void print_counter_aggr(struct perf_evsel *counter)
 	if (scaled == -1) {
 		fprintf(stderr, "%*s%s%*s",
 			csv_output ? 0 : 18,
-			"<not counted>",
+			counter->supported ? CNTR_NOT_COUNTED : CNTR_NOT_SUPPORTED,
 			csv_sep,
 			csv_output ? 0 : -24,
 			event_name(counter));
@@ -878,13 +885,13 @@ static void print_counter_aggr(struct perf_evsel *counter)
 	else
 		abs_printout(-1, counter, avg);
 
+	print_noise(counter, avg);
+
 	if (csv_output) {
 		fputc('\n', stderr);
 		return;
 	}
 
-	print_noise(counter, avg);
-
 	if (scaled) {
 		double avg_enabled, avg_running;
 
@@ -914,7 +921,8 @@ static void print_counter(struct perf_evsel *counter)
 				csv_output ? 0 : -4,
 				evsel_list->cpus->map[cpu], csv_sep,
 				csv_output ? 0 : 18,
-				"<not counted>", csv_sep,
+				counter->supported ? CNTR_NOT_COUNTED : CNTR_NOT_SUPPORTED,
+				csv_sep,
 				csv_output ? 0 : -24,
 				event_name(counter));
 
@@ -1024,7 +1032,7 @@ static int stat__set_big_num(const struct option *opt __used,
 static const struct option options[] = {
 	OPT_CALLBACK('e', "event", &evsel_list, "event",
 		     "event selector. use 'perf list' to list available events",
-		     parse_events),
+		     parse_events_option),
 	OPT_CALLBACK(0, "filter", &evsel_list, "filter",
 		     "event filter", parse_filter),
 	OPT_BOOLEAN('i', "no-inherit", &no_inherit,
diff --git a/tools/perf/builtin-test.c b/tools/perf/builtin-test.c
index 2da9162262b0..55f4c76f2821 100644
--- a/tools/perf/builtin-test.c
+++ b/tools/perf/builtin-test.c
@@ -12,6 +12,7 @@
 #include "util/parse-events.h"
 #include "util/symbol.h"
 #include "util/thread_map.h"
+#include "../../include/linux/hw_breakpoint.h"
 
 static long page_size;
 
@@ -245,8 +246,8 @@ static int trace_event__id(const char *evname)
 	int err = -1, fd;
 
 	if (asprintf(&filename,
-		     "/sys/kernel/debug/tracing/events/syscalls/%s/id",
-		     evname) < 0)
+		     "%s/syscalls/%s/id",
+		     debugfs_path, evname) < 0)
 		return -1;
 
 	fd = open(filename, O_RDONLY);
@@ -600,6 +601,246 @@ out_free_threads:
 #undef nsyscalls
 }
 
+#define TEST_ASSERT_VAL(text, cond) \
+do { \
+	if (!cond) { \
+		pr_debug("FAILED %s:%d %s\n", __FILE__, __LINE__, text); \
+		return -1; \
+	} \
+} while (0)
+
+static int test__checkevent_tracepoint(struct perf_evlist *evlist)
+{
+	struct perf_evsel *evsel = list_entry(evlist->entries.next,
+					      struct perf_evsel, node);
+
+	TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->nr_entries);
+	TEST_ASSERT_VAL("wrong type", PERF_TYPE_TRACEPOINT == evsel->attr.type);
+	TEST_ASSERT_VAL("wrong sample_type",
+		(PERF_SAMPLE_RAW | PERF_SAMPLE_TIME | PERF_SAMPLE_CPU) ==
+		evsel->attr.sample_type);
+	TEST_ASSERT_VAL("wrong sample_period", 1 == evsel->attr.sample_period);
+	return 0;
+}
+
+static int test__checkevent_tracepoint_multi(struct perf_evlist *evlist)
+{
+	struct perf_evsel *evsel;
+
+	TEST_ASSERT_VAL("wrong number of entries", evlist->nr_entries > 1);
+
+	list_for_each_entry(evsel, &evlist->entries, node) {
+		TEST_ASSERT_VAL("wrong type",
+			PERF_TYPE_TRACEPOINT == evsel->attr.type);
+		TEST_ASSERT_VAL("wrong sample_type",
+			(PERF_SAMPLE_RAW | PERF_SAMPLE_TIME | PERF_SAMPLE_CPU)
+			== evsel->attr.sample_type);
+		TEST_ASSERT_VAL("wrong sample_period",
+			1 == evsel->attr.sample_period);
+	}
+	return 0;
+}
+
+static int test__checkevent_raw(struct perf_evlist *evlist)
+{
+	struct perf_evsel *evsel = list_entry(evlist->entries.next,
+					      struct perf_evsel, node);
+
+	TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->nr_entries);
+	TEST_ASSERT_VAL("wrong type", PERF_TYPE_RAW == evsel->attr.type);
+	TEST_ASSERT_VAL("wrong config", 1 == evsel->attr.config);
+	return 0;
+}
+
+static int test__checkevent_numeric(struct perf_evlist *evlist)
+{
+	struct perf_evsel *evsel = list_entry(evlist->entries.next,
+					      struct perf_evsel, node);
+
+	TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->nr_entries);
+	TEST_ASSERT_VAL("wrong type", 1 == evsel->attr.type);
+	TEST_ASSERT_VAL("wrong config", 1 == evsel->attr.config);
+	return 0;
+}
+
+static int test__checkevent_symbolic_name(struct perf_evlist *evlist)
+{
+	struct perf_evsel *evsel = list_entry(evlist->entries.next,
+					      struct perf_evsel, node);
+
+	TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->nr_entries);
+	TEST_ASSERT_VAL("wrong type", PERF_TYPE_HARDWARE == evsel->attr.type);
+	TEST_ASSERT_VAL("wrong config",
+			PERF_COUNT_HW_INSTRUCTIONS == evsel->attr.config);
+	return 0;
+}
+
+static int test__checkevent_symbolic_alias(struct perf_evlist *evlist)
+{
+	struct perf_evsel *evsel = list_entry(evlist->entries.next,
+					      struct perf_evsel, node);
+
+	TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->nr_entries);
+	TEST_ASSERT_VAL("wrong type", PERF_TYPE_SOFTWARE == evsel->attr.type);
+	TEST_ASSERT_VAL("wrong config",
+			PERF_COUNT_SW_PAGE_FAULTS == evsel->attr.config);
+	return 0;
+}
+
+static int test__checkevent_genhw(struct perf_evlist *evlist)
+{
+	struct perf_evsel *evsel = list_entry(evlist->entries.next,
+					      struct perf_evsel, node);
+
+	TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->nr_entries);
+	TEST_ASSERT_VAL("wrong type", PERF_TYPE_HW_CACHE == evsel->attr.type);
+	TEST_ASSERT_VAL("wrong config", (1 << 16) == evsel->attr.config);
+	return 0;
+}
+
+static int test__checkevent_breakpoint(struct perf_evlist *evlist)
+{
+	struct perf_evsel *evsel = list_entry(evlist->entries.next,
+					      struct perf_evsel, node);
+
+	TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->nr_entries);
+	TEST_ASSERT_VAL("wrong type", PERF_TYPE_BREAKPOINT == evsel->attr.type);
+	TEST_ASSERT_VAL("wrong config", 0 == evsel->attr.config);
+	TEST_ASSERT_VAL("wrong bp_type", (HW_BREAKPOINT_R | HW_BREAKPOINT_W) ==
+					 evsel->attr.bp_type);
+	TEST_ASSERT_VAL("wrong bp_len", HW_BREAKPOINT_LEN_4 ==
+					evsel->attr.bp_len);
+	return 0;
+}
+
+static int test__checkevent_breakpoint_x(struct perf_evlist *evlist)
+{
+	struct perf_evsel *evsel = list_entry(evlist->entries.next,
+					      struct perf_evsel, node);
+
+	TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->nr_entries);
+	TEST_ASSERT_VAL("wrong type", PERF_TYPE_BREAKPOINT == evsel->attr.type);
+	TEST_ASSERT_VAL("wrong config", 0 == evsel->attr.config);
+	TEST_ASSERT_VAL("wrong bp_type",
+			HW_BREAKPOINT_X == evsel->attr.bp_type);
+	TEST_ASSERT_VAL("wrong bp_len", sizeof(long) == evsel->attr.bp_len);
+	return 0;
+}
+
+static int test__checkevent_breakpoint_r(struct perf_evlist *evlist)
+{
+	struct perf_evsel *evsel = list_entry(evlist->entries.next,
+					      struct perf_evsel, node);
+
+	TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->nr_entries);
+	TEST_ASSERT_VAL("wrong type",
+			PERF_TYPE_BREAKPOINT == evsel->attr.type);
+	TEST_ASSERT_VAL("wrong config", 0 == evsel->attr.config);
+	TEST_ASSERT_VAL("wrong bp_type",
+			HW_BREAKPOINT_R == evsel->attr.bp_type);
+	TEST_ASSERT_VAL("wrong bp_len",
+			HW_BREAKPOINT_LEN_4 == evsel->attr.bp_len);
+	return 0;
+}
+
+static int test__checkevent_breakpoint_w(struct perf_evlist *evlist)
+{
+	struct perf_evsel *evsel = list_entry(evlist->entries.next,
+					      struct perf_evsel, node);
+
+	TEST_ASSERT_VAL("wrong number of entries", 1 == evlist->nr_entries);
+	TEST_ASSERT_VAL("wrong type",
+			PERF_TYPE_BREAKPOINT == evsel->attr.type);
+	TEST_ASSERT_VAL("wrong config", 0 == evsel->attr.config);
+	TEST_ASSERT_VAL("wrong bp_type",
+			HW_BREAKPOINT_W == evsel->attr.bp_type);
+	TEST_ASSERT_VAL("wrong bp_len",
+			HW_BREAKPOINT_LEN_4 == evsel->attr.bp_len);
+	return 0;
+}
+
+static struct test__event_st {
+	const char *name;
+	__u32 type;
+	int (*check)(struct perf_evlist *evlist);
+} test__events[] = {
+	{
+		.name  = "syscalls:sys_enter_open",
+		.check = test__checkevent_tracepoint,
+	},
+	{
+		.name  = "syscalls:*",
+		.check = test__checkevent_tracepoint_multi,
+	},
+	{
+		.name  = "r1",
+		.check = test__checkevent_raw,
+	},
+	{
+		.name  = "1:1",
+		.check = test__checkevent_numeric,
+	},
+	{
+		.name  = "instructions",
+		.check = test__checkevent_symbolic_name,
+	},
+	{
+		.name  = "faults",
+		.check = test__checkevent_symbolic_alias,
+	},
+	{
+		.name  = "L1-dcache-load-miss",
+		.check = test__checkevent_genhw,
+	},
+	{
+		.name  = "mem:0",
+		.check = test__checkevent_breakpoint,
+	},
+	{
+		.name  = "mem:0:x",
+		.check = test__checkevent_breakpoint_x,
+	},
+	{
+		.name  = "mem:0:r",
+		.check = test__checkevent_breakpoint_r,
+	},
+	{
+		.name  = "mem:0:w",
+		.check = test__checkevent_breakpoint_w,
+	},
+};
+
+#define TEST__EVENTS_CNT (sizeof(test__events) / sizeof(struct test__event_st))
+
+static int test__parse_events(void)
+{
+	struct perf_evlist *evlist;
+	u_int i;
+	int ret = 0;
+
+	for (i = 0; i < TEST__EVENTS_CNT; i++) {
+		struct test__event_st *e = &test__events[i];
+
+		evlist = perf_evlist__new(NULL, NULL);
+		if (evlist == NULL)
+			break;
+
+		ret = parse_events(evlist, e->name, 0);
+		if (ret) {
+			pr_debug("failed to parse event '%s', err %d\n",
+				 e->name, ret);
+			break;
+		}
+
+		ret = e->check(evlist);
+		if (ret)
+			break;
+
+		perf_evlist__delete(evlist);
+	}
+
+	return ret;
+}
 static struct test {
 	const char *desc;
 	int (*func)(void);
@@ -621,6 +862,10 @@ static struct test {
 		.func = test__basic_mmap,
 	},
 	{
+		.desc = "parse events tests",
+		.func = test__parse_events,
+	},
+	{
 		.func = NULL,
 	},
 };
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index f2f3f4937aa2..a43433f08300 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -990,7 +990,7 @@ static const char * const top_usage[] = {
 static const struct option options[] = {
 	OPT_CALLBACK('e', "event", &top.evlist, "event",
 		     "event selector. use 'perf list' to list available events",
-		     parse_events),
+		     parse_events_option),
 	OPT_INTEGER('c', "count", &default_interval,
 		    "event period to sample"),
 	OPT_INTEGER('p', "pid", &top.target_pid,
diff --git a/tools/perf/util/callchain.h b/tools/perf/util/callchain.h
index 1a79df9f739f..9b4ff16cac96 100644
--- a/tools/perf/util/callchain.h
+++ b/tools/perf/util/callchain.h
@@ -14,6 +14,11 @@ enum chain_mode {
 	CHAIN_GRAPH_REL
 };
 
+enum chain_order {
+	ORDER_CALLER,
+	ORDER_CALLEE
+};
+
 struct callchain_node {
 	struct callchain_node	*parent;
 	struct list_head	siblings;
@@ -41,6 +46,7 @@ struct callchain_param {
 	u32			print_limit;
 	double			min_percent;
 	sort_chain_func_t	sort;
+	enum chain_order	order;
 };
 
 struct callchain_list {
diff --git a/tools/perf/util/dwarf-aux.c b/tools/perf/util/dwarf-aux.c
new file mode 100644
index 000000000000..fddf40f30d3e
--- /dev/null
+++ b/tools/perf/util/dwarf-aux.c
@@ -0,0 +1,663 @@
+/*
+ * dwarf-aux.c : libdw auxiliary interfaces
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+#include <stdbool.h>
+#include "util.h"
+#include "debug.h"
+#include "dwarf-aux.h"
+
+/**
+ * cu_find_realpath - Find the realpath of the target file
+ * @cu_die: A DIE(dwarf information entry) of CU(compilation Unit)
+ * @fname:  The tail filename of the target file
+ *
+ * Find the real(long) path of @fname in @cu_die.
+ */
+const char *cu_find_realpath(Dwarf_Die *cu_die, const char *fname)
+{
+	Dwarf_Files *files;
+	size_t nfiles, i;
+	const char *src = NULL;
+	int ret;
+
+	if (!fname)
+		return NULL;
+
+	ret = dwarf_getsrcfiles(cu_die, &files, &nfiles);
+	if (ret != 0)
+		return NULL;
+
+	for (i = 0; i < nfiles; i++) {
+		src = dwarf_filesrc(files, i, NULL, NULL);
+		if (strtailcmp(src, fname) == 0)
+			break;
+	}
+	if (i == nfiles)
+		return NULL;
+	return src;
+}
+
+/**
+ * cu_get_comp_dir - Get the path of compilation directory
+ * @cu_die: a CU DIE
+ *
+ * Get the path of compilation directory of given @cu_die.
+ * Since this depends on DW_AT_comp_dir, older gcc will not
+ * embedded it. In that case, this returns NULL.
+ */
+const char *cu_get_comp_dir(Dwarf_Die *cu_die)
+{
+	Dwarf_Attribute attr;
+	if (dwarf_attr(cu_die, DW_AT_comp_dir, &attr) == NULL)
+		return NULL;
+	return dwarf_formstring(&attr);
+}
+
+/**
+ * cu_find_lineinfo - Get a line number and file name for given address
+ * @cu_die: a CU DIE
+ * @addr: An address
+ * @fname: a pointer which returns the file name string
+ * @lineno: a pointer which returns the line number
+ *
+ * Find a line number and file name for @addr in @cu_die.
+ */
+int cu_find_lineinfo(Dwarf_Die *cu_die, unsigned long addr,
+		    const char **fname, int *lineno)
+{
+	Dwarf_Line *line;
+	Dwarf_Addr laddr;
+
+	line = dwarf_getsrc_die(cu_die, (Dwarf_Addr)addr);
+	if (line && dwarf_lineaddr(line, &laddr) == 0 &&
+	    addr == (unsigned long)laddr && dwarf_lineno(line, lineno) == 0) {
+		*fname = dwarf_linesrc(line, NULL, NULL);
+		if (!*fname)
+			/* line number is useless without filename */
+			*lineno = 0;
+	}
+
+	return *lineno ?: -ENOENT;
+}
+
+/**
+ * die_compare_name - Compare diename and tname
+ * @dw_die: a DIE
+ * @tname: a string of target name
+ *
+ * Compare the name of @dw_die and @tname. Return false if @dw_die has no name.
+ */
+bool die_compare_name(Dwarf_Die *dw_die, const char *tname)
+{
+	const char *name;
+	name = dwarf_diename(dw_die);
+	return name ? (strcmp(tname, name) == 0) : false;
+}
+
+/**
+ * die_get_call_lineno - Get callsite line number of inline-function instance
+ * @in_die: a DIE of an inlined function instance
+ *
+ * Get call-site line number of @in_die. This means from where the inline
+ * function is called.
+ */
+int die_get_call_lineno(Dwarf_Die *in_die)
+{
+	Dwarf_Attribute attr;
+	Dwarf_Word ret;
+
+	if (!dwarf_attr(in_die, DW_AT_call_line, &attr))
+		return -ENOENT;
+
+	dwarf_formudata(&attr, &ret);
+	return (int)ret;
+}
+
+/**
+ * die_get_type - Get type DIE
+ * @vr_die: a DIE of a variable
+ * @die_mem: where to store a type DIE
+ *
+ * Get a DIE of the type of given variable (@vr_die), and store
+ * it to die_mem. Return NULL if fails to get a type DIE.
+ */
+Dwarf_Die *die_get_type(Dwarf_Die *vr_die, Dwarf_Die *die_mem)
+{
+	Dwarf_Attribute attr;
+
+	if (dwarf_attr_integrate(vr_die, DW_AT_type, &attr) &&
+	    dwarf_formref_die(&attr, die_mem))
+		return die_mem;
+	else
+		return NULL;
+}
+
+/* Get a type die, but skip qualifiers */
+static Dwarf_Die *__die_get_real_type(Dwarf_Die *vr_die, Dwarf_Die *die_mem)
+{
+	int tag;
+
+	do {
+		vr_die = die_get_type(vr_die, die_mem);
+		if (!vr_die)
+			break;
+		tag = dwarf_tag(vr_die);
+	} while (tag == DW_TAG_const_type ||
+		 tag == DW_TAG_restrict_type ||
+		 tag == DW_TAG_volatile_type ||
+		 tag == DW_TAG_shared_type);
+
+	return vr_die;
+}
+
+/**
+ * die_get_real_type - Get a type die, but skip qualifiers and typedef
+ * @vr_die: a DIE of a variable
+ * @die_mem: where to store a type DIE
+ *
+ * Get a DIE of the type of given variable (@vr_die), and store
+ * it to die_mem. Return NULL if fails to get a type DIE.
+ * If the type is qualifiers (e.g. const) or typedef, this skips it
+ * and tries to find real type (structure or basic types, e.g. int).
+ */
+Dwarf_Die *die_get_real_type(Dwarf_Die *vr_die, Dwarf_Die *die_mem)
+{
+	do {
+		vr_die = __die_get_real_type(vr_die, die_mem);
+	} while (vr_die && dwarf_tag(vr_die) == DW_TAG_typedef);
+
+	return vr_die;
+}
+
+/* Get attribute and translate it as a udata */
+static int die_get_attr_udata(Dwarf_Die *tp_die, unsigned int attr_name,
+			      Dwarf_Word *result)
+{
+	Dwarf_Attribute attr;
+
+	if (dwarf_attr(tp_die, attr_name, &attr) == NULL ||
+	    dwarf_formudata(&attr, result) != 0)
+		return -ENOENT;
+
+	return 0;
+}
+
+/**
+ * die_is_signed_type - Check whether a type DIE is signed or not
+ * @tp_die: a DIE of a type
+ *
+ * Get the encoding of @tp_die and return true if the encoding
+ * is signed.
+ */
+bool die_is_signed_type(Dwarf_Die *tp_die)
+{
+	Dwarf_Word ret;
+
+	if (die_get_attr_udata(tp_die, DW_AT_encoding, &ret))
+		return false;
+
+	return (ret == DW_ATE_signed_char || ret == DW_ATE_signed ||
+		ret == DW_ATE_signed_fixed);
+}
+
+/**
+ * die_get_data_member_location - Get the data-member offset
+ * @mb_die: a DIE of a member of a data structure
+ * @offs: The offset of the member in the data structure
+ *
+ * Get the offset of @mb_die in the data structure including @mb_die, and
+ * stores result offset to @offs. If any error occurs this returns errno.
+ */
+int die_get_data_member_location(Dwarf_Die *mb_die, Dwarf_Word *offs)
+{
+	Dwarf_Attribute attr;
+	Dwarf_Op *expr;
+	size_t nexpr;
+	int ret;
+
+	if (dwarf_attr(mb_die, DW_AT_data_member_location, &attr) == NULL)
+		return -ENOENT;
+
+	if (dwarf_formudata(&attr, offs) != 0) {
+		/* DW_AT_data_member_location should be DW_OP_plus_uconst */
+		ret = dwarf_getlocation(&attr, &expr, &nexpr);
+		if (ret < 0 || nexpr == 0)
+			return -ENOENT;
+
+		if (expr[0].atom != DW_OP_plus_uconst || nexpr != 1) {
+			pr_debug("Unable to get offset:Unexpected OP %x (%zd)\n",
+				 expr[0].atom, nexpr);
+			return -ENOTSUP;
+		}
+		*offs = (Dwarf_Word)expr[0].number;
+	}
+	return 0;
+}
+
+/**
+ * die_find_child - Generic DIE search function in DIE tree
+ * @rt_die: a root DIE
+ * @callback: a callback function
+ * @data: a user data passed to the callback function
+ * @die_mem: a buffer for result DIE
+ *
+ * Trace DIE tree from @rt_die and call @callback for each child DIE.
+ * If @callback returns DIE_FIND_CB_END, this stores the DIE into
+ * @die_mem and returns it. If @callback returns DIE_FIND_CB_CONTINUE,
+ * this continues to trace the tree. Optionally, @callback can return
+ * DIE_FIND_CB_CHILD and DIE_FIND_CB_SIBLING, those means trace only
+ * the children and trace only the siblings respectively.
+ * Returns NULL if @callback can't find any appropriate DIE.
+ */
+Dwarf_Die *die_find_child(Dwarf_Die *rt_die,
+			  int (*callback)(Dwarf_Die *, void *),
+			  void *data, Dwarf_Die *die_mem)
+{
+	Dwarf_Die child_die;
+	int ret;
+
+	ret = dwarf_child(rt_die, die_mem);
+	if (ret != 0)
+		return NULL;
+
+	do {
+		ret = callback(die_mem, data);
+		if (ret == DIE_FIND_CB_END)
+			return die_mem;
+
+		if ((ret & DIE_FIND_CB_CHILD) &&
+		    die_find_child(die_mem, callback, data, &child_die)) {
+			memcpy(die_mem, &child_die, sizeof(Dwarf_Die));
+			return die_mem;
+		}
+	} while ((ret & DIE_FIND_CB_SIBLING) &&
+		 dwarf_siblingof(die_mem, die_mem) == 0);
+
+	return NULL;
+}
+
+struct __addr_die_search_param {
+	Dwarf_Addr	addr;
+	Dwarf_Die	*die_mem;
+};
+
+/* die_find callback for non-inlined function search */
+static int __die_search_func_cb(Dwarf_Die *fn_die, void *data)
+{
+	struct __addr_die_search_param *ad = data;
+
+	if (dwarf_tag(fn_die) == DW_TAG_subprogram &&
+	    dwarf_haspc(fn_die, ad->addr)) {
+		memcpy(ad->die_mem, fn_die, sizeof(Dwarf_Die));
+		return DWARF_CB_ABORT;
+	}
+	return DWARF_CB_OK;
+}
+
+/**
+ * die_find_realfunc - Search a non-inlined function at given address
+ * @cu_die: a CU DIE which including @addr
+ * @addr: target address
+ * @die_mem: a buffer for result DIE
+ *
+ * Search a non-inlined function DIE which includes @addr. Stores the
+ * DIE to @die_mem and returns it if found. Returns NULl if failed.
+ */
+Dwarf_Die *die_find_realfunc(Dwarf_Die *cu_die, Dwarf_Addr addr,
+				    Dwarf_Die *die_mem)
+{
+	struct __addr_die_search_param ad;
+	ad.addr = addr;
+	ad.die_mem = die_mem;
+	/* dwarf_getscopes can't find subprogram. */
+	if (!dwarf_getfuncs(cu_die, __die_search_func_cb, &ad, 0))
+		return NULL;
+	else
+		return die_mem;
+}
+
+/* die_find callback for inline function search */
+static int __die_find_inline_cb(Dwarf_Die *die_mem, void *data)
+{
+	Dwarf_Addr *addr = data;
+
+	if (dwarf_tag(die_mem) == DW_TAG_inlined_subroutine &&
+	    dwarf_haspc(die_mem, *addr))
+		return DIE_FIND_CB_END;
+
+	return DIE_FIND_CB_CONTINUE;
+}
+
+/**
+ * die_find_inlinefunc - Search an inlined function at given address
+ * @cu_die: a CU DIE which including @addr
+ * @addr: target address
+ * @die_mem: a buffer for result DIE
+ *
+ * Search an inlined function DIE which includes @addr. Stores the
+ * DIE to @die_mem and returns it if found. Returns NULl if failed.
+ * If several inlined functions are expanded recursively, this trace
+ * it and returns deepest one.
+ */
+Dwarf_Die *die_find_inlinefunc(Dwarf_Die *sp_die, Dwarf_Addr addr,
+			       Dwarf_Die *die_mem)
+{
+	Dwarf_Die tmp_die;
+
+	sp_die = die_find_child(sp_die, __die_find_inline_cb, &addr, &tmp_die);
+	if (!sp_die)
+		return NULL;
+
+	/* Inlined function could be recursive. Trace it until fail */
+	while (sp_die) {
+		memcpy(die_mem, sp_die, sizeof(Dwarf_Die));
+		sp_die = die_find_child(sp_die, __die_find_inline_cb, &addr,
+					&tmp_die);
+	}
+
+	return die_mem;
+}
+
+/* Line walker internal parameters */
+struct __line_walk_param {
+	const char *fname;
+	line_walk_callback_t callback;
+	void *data;
+	int retval;
+};
+
+static int __die_walk_funclines_cb(Dwarf_Die *in_die, void *data)
+{
+	struct __line_walk_param *lw = data;
+	Dwarf_Addr addr;
+	int lineno;
+
+	if (dwarf_tag(in_die) == DW_TAG_inlined_subroutine) {
+		lineno = die_get_call_lineno(in_die);
+		if (lineno > 0 && dwarf_entrypc(in_die, &addr) == 0) {
+			lw->retval = lw->callback(lw->fname, lineno, addr,
+						  lw->data);
+			if (lw->retval != 0)
+				return DIE_FIND_CB_END;
+		}
+	}
+	return DIE_FIND_CB_SIBLING;
+}
+
+/* Walk on lines of blocks included in given DIE */
+static int __die_walk_funclines(Dwarf_Die *sp_die,
+				line_walk_callback_t callback, void *data)
+{
+	struct __line_walk_param lw = {
+		.callback = callback,
+		.data = data,
+		.retval = 0,
+	};
+	Dwarf_Die die_mem;
+	Dwarf_Addr addr;
+	int lineno;
+
+	/* Handle function declaration line */
+	lw.fname = dwarf_decl_file(sp_die);
+	if (lw.fname && dwarf_decl_line(sp_die, &lineno) == 0 &&
+	    dwarf_entrypc(sp_die, &addr) == 0) {
+		lw.retval = callback(lw.fname, lineno, addr, data);
+		if (lw.retval != 0)
+			goto done;
+	}
+	die_find_child(sp_die, __die_walk_funclines_cb, &lw, &die_mem);
+done:
+	return lw.retval;
+}
+
+static int __die_walk_culines_cb(Dwarf_Die *sp_die, void *data)
+{
+	struct __line_walk_param *lw = data;
+
+	lw->retval = __die_walk_funclines(sp_die, lw->callback, lw->data);
+	if (lw->retval != 0)
+		return DWARF_CB_ABORT;
+
+	return DWARF_CB_OK;
+}
+
+/**
+ * die_walk_lines - Walk on lines inside given DIE
+ * @rt_die: a root DIE (CU or subprogram)
+ * @callback: callback routine
+ * @data: user data
+ *
+ * Walk on all lines inside given @rt_die and call @callback on each line.
+ * If the @rt_die is a function, walk only on the lines inside the function,
+ * otherwise @rt_die must be a CU DIE.
+ * Note that this walks not only dwarf line list, but also function entries
+ * and inline call-site.
+ */
+int die_walk_lines(Dwarf_Die *rt_die, line_walk_callback_t callback, void *data)
+{
+	Dwarf_Lines *lines;
+	Dwarf_Line *line;
+	Dwarf_Addr addr;
+	const char *fname;
+	int lineno, ret = 0;
+	Dwarf_Die die_mem, *cu_die;
+	size_t nlines, i;
+
+	/* Get the CU die */
+	if (dwarf_tag(rt_die) == DW_TAG_subprogram)
+		cu_die = dwarf_diecu(rt_die, &die_mem, NULL, NULL);
+	else
+		cu_die = rt_die;
+	if (!cu_die) {
+		pr_debug2("Failed to get CU from subprogram\n");
+		return -EINVAL;
+	}
+
+	/* Get lines list in the CU */
+	if (dwarf_getsrclines(cu_die, &lines, &nlines) != 0) {
+		pr_debug2("Failed to get source lines on this CU.\n");
+		return -ENOENT;
+	}
+	pr_debug2("Get %zd lines from this CU\n", nlines);
+
+	/* Walk on the lines on lines list */
+	for (i = 0; i < nlines; i++) {
+		line = dwarf_onesrcline(lines, i);
+		if (line == NULL ||
+		    dwarf_lineno(line, &lineno) != 0 ||
+		    dwarf_lineaddr(line, &addr) != 0) {
+			pr_debug2("Failed to get line info. "
+				  "Possible error in debuginfo.\n");
+			continue;
+		}
+		/* Filter lines based on address */
+		if (rt_die != cu_die)
+			/*
+			 * Address filtering
+			 * The line is included in given function, and
+			 * no inline block includes it.
+			 */
+			if (!dwarf_haspc(rt_die, addr) ||
+			    die_find_inlinefunc(rt_die, addr, &die_mem))
+				continue;
+		/* Get source line */
+		fname = dwarf_linesrc(line, NULL, NULL);
+
+		ret = callback(fname, lineno, addr, data);
+		if (ret != 0)
+			return ret;
+	}
+
+	/*
+	 * Dwarf lines doesn't include function declarations and inlined
+	 * subroutines. We have to check functions list or given function.
+	 */
+	if (rt_die != cu_die)
+		ret = __die_walk_funclines(rt_die, callback, data);
+	else {
+		struct __line_walk_param param = {
+			.callback = callback,
+			.data = data,
+			.retval = 0,
+		};
+		dwarf_getfuncs(cu_die, __die_walk_culines_cb, &param, 0);
+		ret = param.retval;
+	}
+
+	return ret;
+}
+
+struct __find_variable_param {
+	const char *name;
+	Dwarf_Addr addr;
+};
+
+static int __die_find_variable_cb(Dwarf_Die *die_mem, void *data)
+{
+	struct __find_variable_param *fvp = data;
+	int tag;
+
+	tag = dwarf_tag(die_mem);
+	if ((tag == DW_TAG_formal_parameter ||
+	     tag == DW_TAG_variable) &&
+	    die_compare_name(die_mem, fvp->name))
+		return DIE_FIND_CB_END;
+
+	if (dwarf_haspc(die_mem, fvp->addr))
+		return DIE_FIND_CB_CONTINUE;
+	else
+		return DIE_FIND_CB_SIBLING;
+}
+
+/**
+ * die_find_variable_at - Find a given name variable at given address
+ * @sp_die: a function DIE
+ * @name: variable name
+ * @addr: address
+ * @die_mem: a buffer for result DIE
+ *
+ * Find a variable DIE called @name at @addr in @sp_die.
+ */
+Dwarf_Die *die_find_variable_at(Dwarf_Die *sp_die, const char *name,
+				Dwarf_Addr addr, Dwarf_Die *die_mem)
+{
+	struct __find_variable_param fvp = { .name = name, .addr = addr};
+
+	return die_find_child(sp_die, __die_find_variable_cb, (void *)&fvp,
+			      die_mem);
+}
+
+static int __die_find_member_cb(Dwarf_Die *die_mem, void *data)
+{
+	const char *name = data;
+
+	if ((dwarf_tag(die_mem) == DW_TAG_member) &&
+	    die_compare_name(die_mem, name))
+		return DIE_FIND_CB_END;
+
+	return DIE_FIND_CB_SIBLING;
+}
+
+/**
+ * die_find_member - Find a given name member in a data structure
+ * @st_die: a data structure type DIE
+ * @name: member name
+ * @die_mem: a buffer for result DIE
+ *
+ * Find a member DIE called @name in @st_die.
+ */
+Dwarf_Die *die_find_member(Dwarf_Die *st_die, const char *name,
+			   Dwarf_Die *die_mem)
+{
+	return die_find_child(st_die, __die_find_member_cb, (void *)name,
+			      die_mem);
+}
+
+/**
+ * die_get_typename - Get the name of given variable DIE
+ * @vr_die: a variable DIE
+ * @buf: a buffer for result type name
+ * @len: a max-length of @buf
+ *
+ * Get the name of @vr_die and stores it to @buf. Return the actual length
+ * of type name if succeeded. Return -E2BIG if @len is not enough long, and
+ * Return -ENOENT if failed to find type name.
+ * Note that the result will stores typedef name if possible, and stores
+ * "*(function_type)" if the type is a function pointer.
+ */
+int die_get_typename(Dwarf_Die *vr_die, char *buf, int len)
+{
+	Dwarf_Die type;
+	int tag, ret, ret2;
+	const char *tmp = "";
+
+	if (__die_get_real_type(vr_die, &type) == NULL)
+		return -ENOENT;
+
+	tag = dwarf_tag(&type);
+	if (tag == DW_TAG_array_type || tag == DW_TAG_pointer_type)
+		tmp = "*";
+	else if (tag == DW_TAG_subroutine_type) {
+		/* Function pointer */
+		ret = snprintf(buf, len, "(function_type)");
+		return (ret >= len) ? -E2BIG : ret;
+	} else {
+		if (!dwarf_diename(&type))
+			return -ENOENT;
+		if (tag == DW_TAG_union_type)
+			tmp = "union ";
+		else if (tag == DW_TAG_structure_type)
+			tmp = "struct ";
+		/* Write a base name */
+		ret = snprintf(buf, len, "%s%s", tmp, dwarf_diename(&type));
+		return (ret >= len) ? -E2BIG : ret;
+	}
+	ret = die_get_typename(&type, buf, len);
+	if (ret > 0) {
+		ret2 = snprintf(buf + ret, len - ret, "%s", tmp);
+		ret = (ret2 >= len - ret) ? -E2BIG : ret2 + ret;
+	}
+	return ret;
+}
+
+/**
+ * die_get_varname - Get the name and type of given variable DIE
+ * @vr_die: a variable DIE
+ * @buf: a buffer for type and variable name
+ * @len: the max-length of @buf
+ *
+ * Get the name and type of @vr_die and stores it in @buf as "type\tname".
+ */
+int die_get_varname(Dwarf_Die *vr_die, char *buf, int len)
+{
+	int ret, ret2;
+
+	ret = die_get_typename(vr_die, buf, len);
+	if (ret < 0) {
+		pr_debug("Failed to get type, make it unknown.\n");
+		ret = snprintf(buf, len, "(unknown_type)");
+	}
+	if (ret > 0) {
+		ret2 = snprintf(buf + ret, len - ret, "\t%s",
+				dwarf_diename(vr_die));
+		ret = (ret2 >= len - ret) ? -E2BIG : ret2 + ret;
+	}
+	return ret;
+}
+
diff --git a/tools/perf/util/dwarf-aux.h b/tools/perf/util/dwarf-aux.h
new file mode 100644
index 000000000000..bc3b21167e70
--- /dev/null
+++ b/tools/perf/util/dwarf-aux.h
@@ -0,0 +1,100 @@
+#ifndef _DWARF_AUX_H
+#define _DWARF_AUX_H
+/*
+ * dwarf-aux.h : libdw auxiliary interfaces
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+#include <dwarf.h>
+#include <elfutils/libdw.h>
+#include <elfutils/libdwfl.h>
+#include <elfutils/version.h>
+
+/* Find the realpath of the target file */
+extern const char *cu_find_realpath(Dwarf_Die *cu_die, const char *fname);
+
+/* Get DW_AT_comp_dir (should be NULL with older gcc) */
+extern const char *cu_get_comp_dir(Dwarf_Die *cu_die);
+
+/* Get a line number and file name for given address */
+extern int cu_find_lineinfo(Dwarf_Die *cudie, unsigned long addr,
+			    const char **fname, int *lineno);
+
+/* Compare diename and tname */
+extern bool die_compare_name(Dwarf_Die *dw_die, const char *tname);
+
+/* Get callsite line number of inline-function instance */
+extern int die_get_call_lineno(Dwarf_Die *in_die);
+
+/* Get type die */
+extern Dwarf_Die *die_get_type(Dwarf_Die *vr_die, Dwarf_Die *die_mem);
+
+/* Get a type die, but skip qualifiers and typedef */
+extern Dwarf_Die *die_get_real_type(Dwarf_Die *vr_die, Dwarf_Die *die_mem);
+
+/* Check whether the DIE is signed or not */
+extern bool die_is_signed_type(Dwarf_Die *tp_die);
+
+/* Get data_member_location offset */
+extern int die_get_data_member_location(Dwarf_Die *mb_die, Dwarf_Word *offs);
+
+/* Return values for die_find_child() callbacks */
+enum {
+	DIE_FIND_CB_END = 0,		/* End of Search */
+	DIE_FIND_CB_CHILD = 1,		/* Search only children */
+	DIE_FIND_CB_SIBLING = 2,	/* Search only siblings */
+	DIE_FIND_CB_CONTINUE = 3,	/* Search children and siblings */
+};
+
+/* Search child DIEs */
+extern Dwarf_Die *die_find_child(Dwarf_Die *rt_die,
+				 int (*callback)(Dwarf_Die *, void *),
+				 void *data, Dwarf_Die *die_mem);
+
+/* Search a non-inlined function including given address */
+extern Dwarf_Die *die_find_realfunc(Dwarf_Die *cu_die, Dwarf_Addr addr,
+				    Dwarf_Die *die_mem);
+
+/* Search an inlined function including given address */
+extern Dwarf_Die *die_find_inlinefunc(Dwarf_Die *sp_die, Dwarf_Addr addr,
+				      Dwarf_Die *die_mem);
+
+/* Walker on lines (Note: line number will not be sorted) */
+typedef int (* line_walk_callback_t) (const char *fname, int lineno,
+				      Dwarf_Addr addr, void *data);
+
+/*
+ * Walk on lines inside given DIE. If the DIE is a subprogram, walk only on
+ * the lines inside the subprogram, otherwise the DIE must be a CU DIE.
+ */
+extern int die_walk_lines(Dwarf_Die *rt_die, line_walk_callback_t callback,
+			  void *data);
+
+/* Find a variable called 'name' at given address */
+extern Dwarf_Die *die_find_variable_at(Dwarf_Die *sp_die, const char *name,
+				       Dwarf_Addr addr, Dwarf_Die *die_mem);
+
+/* Find a member called 'name' */
+extern Dwarf_Die *die_find_member(Dwarf_Die *st_die, const char *name,
+				  Dwarf_Die *die_mem);
+
+/* Get the name of given variable DIE */
+extern int die_get_typename(Dwarf_Die *vr_die, char *buf, int len);
+
+/* Get the name and type of given variable DIE, stored as "type\tname" */
+extern int die_get_varname(Dwarf_Die *vr_die, char *buf, int len);
+#endif
diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index 0239eb87b232..a03a36b7908a 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -377,6 +377,7 @@ int perf_event__parse_sample(const union perf_event *event, u64 type,
 		array++;
 	}
 
+	data->addr = 0;
 	if (type & PERF_SAMPLE_ADDR) {
 		data->addr = *array;
 		array++;
diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h
index 7e9366e4490b..e9a31554e265 100644
--- a/tools/perf/util/evsel.h
+++ b/tools/perf/util/evsel.h
@@ -61,6 +61,7 @@ struct perf_evsel {
 		off_t		id_offset;
 	};
 	struct cgroup_sel	*cgrp;
+	bool 			supported;
 };
 
 struct cpu_map;
diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index afb0849fe530..cb2959a3fb43 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -877,9 +877,12 @@ int perf_session__read_header(struct perf_session *session, int fd)
 		struct perf_evsel *evsel;
 		off_t tmp;
 
-		if (perf_header__getbuffer64(header, fd, &f_attr, sizeof(f_attr)))
+		if (readn(fd, &f_attr, sizeof(f_attr)) <= 0)
 			goto out_errno;
 
+		if (header->needs_swap)
+			perf_event__attr_swap(&f_attr.attr);
+
 		tmp = lseek(fd, 0, SEEK_CUR);
 		evsel = perf_evsel__new(&f_attr.attr, i);
 
diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c
index 627a02e03c57..677e1da6bb3e 100644
--- a/tools/perf/util/hist.c
+++ b/tools/perf/util/hist.c
@@ -14,7 +14,8 @@ enum hist_filter {
 
 struct callchain_param	callchain_param = {
 	.mode	= CHAIN_GRAPH_REL,
-	.min_percent = 0.5
+	.min_percent = 0.5,
+	.order  = ORDER_CALLEE
 };
 
 u16 hists__col_len(struct hists *self, enum hist_column col)
@@ -846,6 +847,9 @@ print_entries:
 	for (nd = rb_first(&self->entries); nd; nd = rb_next(nd)) {
 		struct hist_entry *h = rb_entry(nd, struct hist_entry, rb_node);
 
+		if (h->filtered)
+			continue;
+
 		if (show_displacement) {
 			if (h->pair != NULL)
 				displacement = ((long)h->pair->position -
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 41982c373faf..4ea7e19f5251 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -86,22 +86,24 @@ static const char *sw_event_names[PERF_COUNT_SW_MAX] = {
 
 #define MAX_ALIASES 8
 
-static const char *hw_cache[][MAX_ALIASES] = {
+static const char *hw_cache[PERF_COUNT_HW_CACHE_MAX][MAX_ALIASES] = {
  { "L1-dcache",	"l1-d",		"l1d",		"L1-data",		},
  { "L1-icache",	"l1-i",		"l1i",		"L1-instruction",	},
- { "LLC",	"L2"							},
+ { "LLC",	"L2",							},
  { "dTLB",	"d-tlb",	"Data-TLB",				},
  { "iTLB",	"i-tlb",	"Instruction-TLB",			},
  { "branch",	"branches",	"bpu",		"btb",		"bpc",	},
+ { "node",								},
 };
 
-static const char *hw_cache_op[][MAX_ALIASES] = {
+static const char *hw_cache_op[PERF_COUNT_HW_CACHE_OP_MAX][MAX_ALIASES] = {
  { "load",	"loads",	"read",					},
  { "store",	"stores",	"write",				},
  { "prefetch",	"prefetches",	"speculative-read", "speculative-load",	},
 };
 
-static const char *hw_cache_result[][MAX_ALIASES] = {
+static const char *hw_cache_result[PERF_COUNT_HW_CACHE_RESULT_MAX]
+				  [MAX_ALIASES] = {
  { "refs",	"Reference",	"ops",		"access",		},
  { "misses",	"miss",							},
 };
@@ -124,6 +126,7 @@ static unsigned long hw_cache_stat[C(MAX)] = {
  [C(DTLB)]	= (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH),
  [C(ITLB)]	= (CACHE_READ),
  [C(BPU)]	= (CACHE_READ),
+ [C(NODE)]	= (CACHE_READ | CACHE_WRITE | CACHE_PREFETCH),
 };
 
 #define for_each_subsystem(sys_dir, sys_dirent, sys_next)	       \
@@ -393,7 +396,7 @@ parse_generic_hw_event(const char **str, struct perf_event_attr *attr)
 						PERF_COUNT_HW_CACHE_OP_MAX);
 			if (cache_op >= 0) {
 				if (!is_cache_op_valid(cache_type, cache_op))
-					return 0;
+					return EVT_FAILED;
 				continue;
 			}
 		}
@@ -475,7 +478,7 @@ parse_single_tracepoint_event(char *sys_name,
 /* sys + ':' + event + ':' + flags*/
 #define MAX_EVOPT_LEN	(MAX_EVENT_LENGTH * 2 + 2 + 128)
 static enum event_result
-parse_multiple_tracepoint_event(const struct option *opt, char *sys_name,
+parse_multiple_tracepoint_event(struct perf_evlist *evlist, char *sys_name,
 				const char *evt_exp, char *flags)
 {
 	char evt_path[MAXPATHLEN];
@@ -509,7 +512,7 @@ parse_multiple_tracepoint_event(const struct option *opt, char *sys_name,
 		if (len < 0)
 			return EVT_FAILED;
 
-		if (parse_events(opt, event_opt, 0))
+		if (parse_events(evlist, event_opt, 0))
 			return EVT_FAILED;
 	}
 
@@ -517,7 +520,7 @@ parse_multiple_tracepoint_event(const struct option *opt, char *sys_name,
 }
 
 static enum event_result
-parse_tracepoint_event(const struct option *opt, const char **strp,
+parse_tracepoint_event(struct perf_evlist *evlist, const char **strp,
 		       struct perf_event_attr *attr)
 {
 	const char *evt_name;
@@ -557,8 +560,8 @@ parse_tracepoint_event(const struct option *opt, const char **strp,
 		return EVT_FAILED;
 	if (strpbrk(evt_name, "*?")) {
 		*strp += strlen(sys_name) + evt_length + 1; /* 1 == the ':' */
-		return parse_multiple_tracepoint_event(opt, sys_name, evt_name,
-						       flags);
+		return parse_multiple_tracepoint_event(evlist, sys_name,
+						       evt_name, flags);
 	} else {
 		return parse_single_tracepoint_event(sys_name, evt_name,
 						     evt_length, attr, strp);
@@ -778,12 +781,12 @@ parse_event_modifier(const char **strp, struct perf_event_attr *attr)
  * Symbolic names are (almost) exactly matched.
  */
 static enum event_result
-parse_event_symbols(const struct option *opt, const char **str,
+parse_event_symbols(struct perf_evlist *evlist, const char **str,
 		    struct perf_event_attr *attr)
 {
 	enum event_result ret;
 
-	ret = parse_tracepoint_event(opt, str, attr);
+	ret = parse_tracepoint_event(evlist, str, attr);
 	if (ret != EVT_FAILED)
 		goto modifier;
 
@@ -822,9 +825,8 @@ modifier:
 	return ret;
 }
 
-int parse_events(const struct option *opt, const char *str, int unset __used)
+int parse_events(struct perf_evlist *evlist , const char *str, int unset __used)
 {
-	struct perf_evlist *evlist = *(struct perf_evlist **)opt->value;
 	struct perf_event_attr attr;
 	enum event_result ret;
 	const char *ostr;
@@ -832,7 +834,7 @@ int parse_events(const struct option *opt, const char *str, int unset __used)
 	for (;;) {
 		ostr = str;
 		memset(&attr, 0, sizeof(attr));
-		ret = parse_event_symbols(opt, &str, &attr);
+		ret = parse_event_symbols(evlist, &str, &attr);
 		if (ret == EVT_FAILED)
 			return -1;
 
@@ -863,6 +865,13 @@ int parse_events(const struct option *opt, const char *str, int unset __used)
 	return 0;
 }
 
+int parse_events_option(const struct option *opt, const char *str,
+			int unset __used)
+{
+	struct perf_evlist *evlist = *(struct perf_evlist **)opt->value;
+	return parse_events(evlist, str, unset);
+}
+
 int parse_filter(const struct option *opt, const char *str,
 		 int unset __used)
 {
diff --git a/tools/perf/util/parse-events.h b/tools/perf/util/parse-events.h
index 746d3fcbfc2a..2f8e375e038d 100644
--- a/tools/perf/util/parse-events.h
+++ b/tools/perf/util/parse-events.h
@@ -8,6 +8,7 @@
 
 struct list_head;
 struct perf_evsel;
+struct perf_evlist;
 
 struct option;
 
@@ -24,7 +25,10 @@ const char *event_type(int type);
 const char *event_name(struct perf_evsel *event);
 extern const char *__event_name(int type, u64 config);
 
-extern int parse_events(const struct option *opt, const char *str, int unset);
+extern int parse_events_option(const struct option *opt, const char *str,
+			       int unset);
+extern int parse_events(struct perf_evlist *evlist, const char *str,
+			int unset);
 extern int parse_filter(const struct option *opt, const char *str, int unset);
 
 #define EVENTS_HELP_MAX (128*1024)
diff --git a/tools/perf/util/probe-event.c b/tools/perf/util/probe-event.c
index f0223166e761..b82d54fa2c56 100644
--- a/tools/perf/util/probe-event.c
+++ b/tools/perf/util/probe-event.c
@@ -117,6 +117,10 @@ static struct map *kernel_get_module_map(const char *module)
 	struct rb_node *nd;
 	struct map_groups *grp = &machine.kmaps;
 
+	/* A file path -- this is an offline module */
+	if (module && strchr(module, '/'))
+		return machine__new_module(&machine, 0, module);
+
 	if (!module)
 		module = "kernel";
 
@@ -170,16 +174,24 @@ const char *kernel_get_module_path(const char *module)
 }
 
 #ifdef DWARF_SUPPORT
-static int open_vmlinux(const char *module)
+/* Open new debuginfo of given module */
+static struct debuginfo *open_debuginfo(const char *module)
 {
-	const char *path = kernel_get_module_path(module);
-	if (!path) {
-		pr_err("Failed to find path of %s module.\n",
-		       module ?: "kernel");
-		return -ENOENT;
+	const char *path;
+
+	/* A file path -- this is an offline module */
+	if (module && strchr(module, '/'))
+		path = module;
+	else {
+		path = kernel_get_module_path(module);
+
+		if (!path) {
+			pr_err("Failed to find path of %s module.\n",
+			       module ?: "kernel");
+			return NULL;
+		}
 	}
-	pr_debug("Try to open %s\n", path);
-	return open(path, O_RDONLY);
+	return debuginfo__new(path);
 }
 
 /*
@@ -193,13 +205,24 @@ static int kprobe_convert_to_perf_probe(struct probe_trace_point *tp,
 	struct map *map;
 	u64 addr;
 	int ret = -ENOENT;
+	struct debuginfo *dinfo;
 
 	sym = __find_kernel_function_by_name(tp->symbol, &map);
 	if (sym) {
 		addr = map->unmap_ip(map, sym->start + tp->offset);
 		pr_debug("try to find %s+%ld@%" PRIx64 "\n", tp->symbol,
 			 tp->offset, addr);
-		ret = find_perf_probe_point((unsigned long)addr, pp);
+
+		dinfo = debuginfo__new_online_kernel(addr);
+		if (dinfo) {
+			ret = debuginfo__find_probe_point(dinfo,
+						 (unsigned long)addr, pp);
+			debuginfo__delete(dinfo);
+		} else {
+			pr_debug("Failed to open debuginfo at 0x%" PRIx64 "\n",
+				 addr);
+			ret = -ENOENT;
+		}
 	}
 	if (ret <= 0) {
 		pr_debug("Failed to find corresponding probes from "
@@ -214,30 +237,70 @@ static int kprobe_convert_to_perf_probe(struct probe_trace_point *tp,
 	return 0;
 }
 
+static int add_module_to_probe_trace_events(struct probe_trace_event *tevs,
+					    int ntevs, const char *module)
+{
+	int i, ret = 0;
+	char *tmp;
+
+	if (!module)
+		return 0;
+
+	tmp = strrchr(module, '/');
+	if (tmp) {
+		/* This is a module path -- get the module name */
+		module = strdup(tmp + 1);
+		if (!module)
+			return -ENOMEM;
+		tmp = strchr(module, '.');
+		if (tmp)
+			*tmp = '\0';
+		tmp = (char *)module;	/* For free() */
+	}
+
+	for (i = 0; i < ntevs; i++) {
+		tevs[i].point.module = strdup(module);
+		if (!tevs[i].point.module) {
+			ret = -ENOMEM;
+			break;
+		}
+	}
+
+	if (tmp)
+		free(tmp);
+
+	return ret;
+}
+
 /* Try to find perf_probe_event with debuginfo */
 static int try_to_find_probe_trace_events(struct perf_probe_event *pev,
-					   struct probe_trace_event **tevs,
-					   int max_tevs, const char *module)
+					  struct probe_trace_event **tevs,
+					  int max_tevs, const char *module)
 {
 	bool need_dwarf = perf_probe_event_need_dwarf(pev);
-	int fd, ntevs;
+	struct debuginfo *dinfo = open_debuginfo(module);
+	int ntevs, ret = 0;
 
-	fd = open_vmlinux(module);
-	if (fd < 0) {
+	if (!dinfo) {
 		if (need_dwarf) {
 			pr_warning("Failed to open debuginfo file.\n");
-			return fd;
+			return -ENOENT;
 		}
-		pr_debug("Could not open vmlinux. Try to use symbols.\n");
+		pr_debug("Could not open debuginfo. Try to use symbols.\n");
 		return 0;
 	}
 
-	/* Searching trace events corresponding to probe event */
-	ntevs = find_probe_trace_events(fd, pev, tevs, max_tevs);
+	/* Searching trace events corresponding to a probe event */
+	ntevs = debuginfo__find_trace_events(dinfo, pev, tevs, max_tevs);
+
+	debuginfo__delete(dinfo);
 
 	if (ntevs > 0) {	/* Succeeded to find trace events */
 		pr_debug("find %d probe_trace_events.\n", ntevs);
-		return ntevs;
+		if (module)
+			ret = add_module_to_probe_trace_events(*tevs, ntevs,
+							       module);
+		return ret < 0 ? ret : ntevs;
 	}
 
 	if (ntevs == 0)	{	/* No error but failed to find probe point. */
@@ -371,8 +434,9 @@ int show_line_range(struct line_range *lr, const char *module)
 {
 	int l = 1;
 	struct line_node *ln;
+	struct debuginfo *dinfo;
 	FILE *fp;
-	int fd, ret;
+	int ret;
 	char *tmp;
 
 	/* Search a line range */
@@ -380,13 +444,14 @@ int show_line_range(struct line_range *lr, const char *module)
 	if (ret < 0)
 		return ret;
 
-	fd = open_vmlinux(module);
-	if (fd < 0) {
+	dinfo = open_debuginfo(module);
+	if (!dinfo) {
 		pr_warning("Failed to open debuginfo file.\n");
-		return fd;
+		return -ENOENT;
 	}
 
-	ret = find_line_range(fd, lr);
+	ret = debuginfo__find_line_range(dinfo, lr);
+	debuginfo__delete(dinfo);
 	if (ret == 0) {
 		pr_warning("Specified source line is not found.\n");
 		return -ENOENT;
@@ -448,7 +513,8 @@ end:
 	return ret;
 }
 
-static int show_available_vars_at(int fd, struct perf_probe_event *pev,
+static int show_available_vars_at(struct debuginfo *dinfo,
+				  struct perf_probe_event *pev,
 				  int max_vls, struct strfilter *_filter,
 				  bool externs)
 {
@@ -463,7 +529,8 @@ static int show_available_vars_at(int fd, struct perf_probe_event *pev,
 		return -EINVAL;
 	pr_debug("Searching variables at %s\n", buf);
 
-	ret = find_available_vars_at(fd, pev, &vls, max_vls, externs);
+	ret = debuginfo__find_available_vars_at(dinfo, pev, &vls,
+						max_vls, externs);
 	if (ret <= 0) {
 		pr_err("Failed to find variables at %s (%d)\n", buf, ret);
 		goto end;
@@ -504,24 +571,26 @@ int show_available_vars(struct perf_probe_event *pevs, int npevs,
 			int max_vls, const char *module,
 			struct strfilter *_filter, bool externs)
 {
-	int i, fd, ret = 0;
+	int i, ret = 0;
+	struct debuginfo *dinfo;
 
 	ret = init_vmlinux();
 	if (ret < 0)
 		return ret;
 
+	dinfo = open_debuginfo(module);
+	if (!dinfo) {
+		pr_warning("Failed to open debuginfo file.\n");
+		return -ENOENT;
+	}
+
 	setup_pager();
 
-	for (i = 0; i < npevs && ret >= 0; i++) {
-		fd = open_vmlinux(module);
-		if (fd < 0) {
-			pr_warning("Failed to open debug information file.\n");
-			ret = fd;
-			break;
-		}
-		ret = show_available_vars_at(fd, &pevs[i], max_vls, _filter,
+	for (i = 0; i < npevs && ret >= 0; i++)
+		ret = show_available_vars_at(dinfo, &pevs[i], max_vls, _filter,
 					     externs);
-	}
+
+	debuginfo__delete(dinfo);
 	return ret;
 }
 
@@ -990,7 +1059,7 @@ bool perf_probe_event_need_dwarf(struct perf_probe_event *pev)
 
 /* Parse probe_events event into struct probe_point */
 static int parse_probe_trace_command(const char *cmd,
-					struct probe_trace_event *tev)
+				     struct probe_trace_event *tev)
 {
 	struct probe_trace_point *tp = &tev->point;
 	char pr;
@@ -1023,8 +1092,14 @@ static int parse_probe_trace_command(const char *cmd,
 
 	tp->retprobe = (pr == 'r');
 
-	/* Scan function name and offset */
-	ret = sscanf(argv[1], "%a[^+]+%lu", (float *)(void *)&tp->symbol,
+	/* Scan module name(if there), function name and offset */
+	p = strchr(argv[1], ':');
+	if (p) {
+		tp->module = strndup(argv[1], p - argv[1]);
+		p++;
+	} else
+		p = argv[1];
+	ret = sscanf(p, "%a[^+]+%lu", (float *)(void *)&tp->symbol,
 		     &tp->offset);
 	if (ret == 1)
 		tp->offset = 0;
@@ -1269,9 +1344,10 @@ char *synthesize_probe_trace_command(struct probe_trace_event *tev)
 	if (buf == NULL)
 		return NULL;
 
-	len = e_snprintf(buf, MAX_CMDLEN, "%c:%s/%s %s+%lu",
+	len = e_snprintf(buf, MAX_CMDLEN, "%c:%s/%s %s%s%s+%lu",
 			 tp->retprobe ? 'r' : 'p',
 			 tev->group, tev->event,
+			 tp->module ?: "", tp->module ? ":" : "",
 			 tp->symbol, tp->offset);
 	if (len <= 0)
 		goto error;
@@ -1378,6 +1454,8 @@ static void clear_probe_trace_event(struct probe_trace_event *tev)
 		free(tev->group);
 	if (tev->point.symbol)
 		free(tev->point.symbol);
+	if (tev->point.module)
+		free(tev->point.module);
 	for (i = 0; i < tev->nargs; i++) {
 		if (tev->args[i].name)
 			free(tev->args[i].name);
@@ -1729,7 +1807,7 @@ static int convert_to_probe_trace_events(struct perf_probe_event *pev,
 	/* Convert perf_probe_event with debuginfo */
 	ret = try_to_find_probe_trace_events(pev, tevs, max_tevs, module);
 	if (ret != 0)
-		return ret;
+		return ret;	/* Found in debuginfo or got an error */
 
 	/* Allocate trace event buffer */
 	tev = *tevs = zalloc(sizeof(struct probe_trace_event));
@@ -1742,6 +1820,11 @@ static int convert_to_probe_trace_events(struct perf_probe_event *pev,
 		ret = -ENOMEM;
 		goto error;
 	}
+	tev->point.module = strdup(module);
+	if (tev->point.module == NULL) {
+		ret = -ENOMEM;
+		goto error;
+	}
 	tev->point.offset = pev->point.offset;
 	tev->point.retprobe = pev->point.retprobe;
 	tev->nargs = pev->nargs;
diff --git a/tools/perf/util/probe-event.h b/tools/perf/util/probe-event.h
index 3434fc9d79d5..a7dee835f49c 100644
--- a/tools/perf/util/probe-event.h
+++ b/tools/perf/util/probe-event.h
@@ -10,6 +10,7 @@ extern bool probe_event_dry_run;
 /* kprobe-tracer tracing point */
 struct probe_trace_point {
 	char		*symbol;	/* Base symbol */
+	char		*module;	/* Module name */
 	unsigned long	offset;		/* Offset from symbol */
 	bool		retprobe;	/* Return probe flag */
 };
diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index 3b9d0b800d5c..3e44a3e36519 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -43,21 +43,6 @@
 /* Kprobe tracer basic type is up to u64 */
 #define MAX_BASIC_TYPE_BITS	64
 
-/*
- * Compare the tail of two strings.
- * Return 0 if whole of either string is same as another's tail part.
- */
-static int strtailcmp(const char *s1, const char *s2)
-{
-	int i1 = strlen(s1);
-	int i2 = strlen(s2);
-	while (--i1 >= 0 && --i2 >= 0) {
-		if (s1[i1] != s2[i2])
-			return s1[i1] - s2[i2];
-	}
-	return 0;
-}
-
 /* Line number list operations */
 
 /* Add a line to line number list */
@@ -131,29 +116,37 @@ static const Dwfl_Callbacks offline_callbacks = {
 };
 
 /* Get a Dwarf from offline image */
-static Dwarf *dwfl_init_offline_dwarf(int fd, Dwfl **dwflp, Dwarf_Addr *bias)
+static int debuginfo__init_offline_dwarf(struct debuginfo *self,
+					 const char *path)
 {
 	Dwfl_Module *mod;
-	Dwarf *dbg = NULL;
+	int fd;
 
-	if (!dwflp)
-		return NULL;
+	fd = open(path, O_RDONLY);
+	if (fd < 0)
+		return fd;
 
-	*dwflp = dwfl_begin(&offline_callbacks);
-	if (!*dwflp)
-		return NULL;
+	self->dwfl = dwfl_begin(&offline_callbacks);
+	if (!self->dwfl)
+		goto error;
 
-	mod = dwfl_report_offline(*dwflp, "", "", fd);
+	mod = dwfl_report_offline(self->dwfl, "", "", fd);
 	if (!mod)
 		goto error;
 
-	dbg = dwfl_module_getdwarf(mod, bias);
-	if (!dbg) {
+	self->dbg = dwfl_module_getdwarf(mod, &self->bias);
+	if (!self->dbg)
+		goto error;
+
+	return 0;
 error:
-		dwfl_end(*dwflp);
-		*dwflp = NULL;
-	}
-	return dbg;
+	if (self->dwfl)
+		dwfl_end(self->dwfl);
+	else
+		close(fd);
+	memset(self, 0, sizeof(*self));
+
+	return -ENOENT;
 }
 
 #if _ELFUTILS_PREREQ(0, 148)
@@ -189,597 +182,81 @@ static const Dwfl_Callbacks kernel_callbacks = {
 };
 
 /* Get a Dwarf from live kernel image */
-static Dwarf *dwfl_init_live_kernel_dwarf(Dwarf_Addr addr, Dwfl **dwflp,
-					  Dwarf_Addr *bias)
+static int debuginfo__init_online_kernel_dwarf(struct debuginfo *self,
+					       Dwarf_Addr addr)
 {
-	Dwarf *dbg;
-
-	if (!dwflp)
-		return NULL;
-
-	*dwflp = dwfl_begin(&kernel_callbacks);
-	if (!*dwflp)
-		return NULL;
+	self->dwfl = dwfl_begin(&kernel_callbacks);
+	if (!self->dwfl)
+		return -EINVAL;
 
 	/* Load the kernel dwarves: Don't care the result here */
-	dwfl_linux_kernel_report_kernel(*dwflp);
-	dwfl_linux_kernel_report_modules(*dwflp);
+	dwfl_linux_kernel_report_kernel(self->dwfl);
+	dwfl_linux_kernel_report_modules(self->dwfl);
 
-	dbg = dwfl_addrdwarf(*dwflp, addr, bias);
+	self->dbg = dwfl_addrdwarf(self->dwfl, addr, &self->bias);
 	/* Here, check whether we could get a real dwarf */
-	if (!dbg) {
+	if (!self->dbg) {
 		pr_debug("Failed to find kernel dwarf at %lx\n",
 			 (unsigned long)addr);
-		dwfl_end(*dwflp);
-		*dwflp = NULL;
+		dwfl_end(self->dwfl);
+		memset(self, 0, sizeof(*self));
+		return -ENOENT;
 	}
-	return dbg;
+
+	return 0;
 }
 #else
 /* With older elfutils, this just support kernel module... */
-static Dwarf *dwfl_init_live_kernel_dwarf(Dwarf_Addr addr __used, Dwfl **dwflp,
-					  Dwarf_Addr *bias)
+static int debuginfo__init_online_kernel_dwarf(struct debuginfo *self,
+					       Dwarf_Addr addr __used)
 {
-	int fd;
 	const char *path = kernel_get_module_path("kernel");
 
 	if (!path) {
 		pr_err("Failed to find vmlinux path\n");
-		return NULL;
+		return -ENOENT;
 	}
 
 	pr_debug2("Use file %s for debuginfo\n", path);
-	fd = open(path, O_RDONLY);
-	if (fd < 0)
-		return NULL;
-
-	return dwfl_init_offline_dwarf(fd, dwflp, bias);
+	return debuginfo__init_offline_dwarf(self, path);
 }
 #endif
 
-/* Dwarf wrappers */
-
-/* Find the realpath of the target file. */
-static const char *cu_find_realpath(Dwarf_Die *cu_die, const char *fname)
-{
-	Dwarf_Files *files;
-	size_t nfiles, i;
-	const char *src = NULL;
-	int ret;
-
-	if (!fname)
-		return NULL;
-
-	ret = dwarf_getsrcfiles(cu_die, &files, &nfiles);
-	if (ret != 0)
-		return NULL;
-
-	for (i = 0; i < nfiles; i++) {
-		src = dwarf_filesrc(files, i, NULL, NULL);
-		if (strtailcmp(src, fname) == 0)
-			break;
-	}
-	if (i == nfiles)
-		return NULL;
-	return src;
-}
-
-/* Get DW_AT_comp_dir (should be NULL with older gcc) */
-static const char *cu_get_comp_dir(Dwarf_Die *cu_die)
-{
-	Dwarf_Attribute attr;
-	if (dwarf_attr(cu_die, DW_AT_comp_dir, &attr) == NULL)
-		return NULL;
-	return dwarf_formstring(&attr);
-}
-
-/* Get a line number and file name for given address */
-static int cu_find_lineinfo(Dwarf_Die *cudie, unsigned long addr,
-			    const char **fname, int *lineno)
-{
-	Dwarf_Line *line;
-	Dwarf_Addr laddr;
-
-	line = dwarf_getsrc_die(cudie, (Dwarf_Addr)addr);
-	if (line && dwarf_lineaddr(line, &laddr) == 0 &&
-	    addr == (unsigned long)laddr && dwarf_lineno(line, lineno) == 0) {
-		*fname = dwarf_linesrc(line, NULL, NULL);
-		if (!*fname)
-			/* line number is useless without filename */
-			*lineno = 0;
-	}
-
-	return *lineno ?: -ENOENT;
-}
-
-/* Compare diename and tname */
-static bool die_compare_name(Dwarf_Die *dw_die, const char *tname)
-{
-	const char *name;
-	name = dwarf_diename(dw_die);
-	return name ? (strcmp(tname, name) == 0) : false;
-}
-
-/* Get callsite line number of inline-function instance */
-static int die_get_call_lineno(Dwarf_Die *in_die)
-{
-	Dwarf_Attribute attr;
-	Dwarf_Word ret;
-
-	if (!dwarf_attr(in_die, DW_AT_call_line, &attr))
-		return -ENOENT;
-
-	dwarf_formudata(&attr, &ret);
-	return (int)ret;
-}
-
-/* Get type die */
-static Dwarf_Die *die_get_type(Dwarf_Die *vr_die, Dwarf_Die *die_mem)
-{
-	Dwarf_Attribute attr;
-
-	if (dwarf_attr_integrate(vr_die, DW_AT_type, &attr) &&
-	    dwarf_formref_die(&attr, die_mem))
-		return die_mem;
-	else
-		return NULL;
-}
-
-/* Get a type die, but skip qualifiers */
-static Dwarf_Die *__die_get_real_type(Dwarf_Die *vr_die, Dwarf_Die *die_mem)
-{
-	int tag;
-
-	do {
-		vr_die = die_get_type(vr_die, die_mem);
-		if (!vr_die)
-			break;
-		tag = dwarf_tag(vr_die);
-	} while (tag == DW_TAG_const_type ||
-		 tag == DW_TAG_restrict_type ||
-		 tag == DW_TAG_volatile_type ||
-		 tag == DW_TAG_shared_type);
-
-	return vr_die;
-}
-
-/* Get a type die, but skip qualifiers and typedef */
-static Dwarf_Die *die_get_real_type(Dwarf_Die *vr_die, Dwarf_Die *die_mem)
-{
-	do {
-		vr_die = __die_get_real_type(vr_die, die_mem);
-	} while (vr_die && dwarf_tag(vr_die) == DW_TAG_typedef);
-
-	return vr_die;
-}
-
-static int die_get_attr_udata(Dwarf_Die *tp_die, unsigned int attr_name,
-			      Dwarf_Word *result)
-{
-	Dwarf_Attribute attr;
-
-	if (dwarf_attr(tp_die, attr_name, &attr) == NULL ||
-	    dwarf_formudata(&attr, result) != 0)
-		return -ENOENT;
-
-	return 0;
-}
-
-static bool die_is_signed_type(Dwarf_Die *tp_die)
-{
-	Dwarf_Word ret;
-
-	if (die_get_attr_udata(tp_die, DW_AT_encoding, &ret))
-		return false;
-
-	return (ret == DW_ATE_signed_char || ret == DW_ATE_signed ||
-		ret == DW_ATE_signed_fixed);
-}
-
-static int die_get_byte_size(Dwarf_Die *tp_die)
-{
-	Dwarf_Word ret;
-
-	if (die_get_attr_udata(tp_die, DW_AT_byte_size, &ret))
-		return 0;
-
-	return (int)ret;
-}
-
-static int die_get_bit_size(Dwarf_Die *tp_die)
-{
-	Dwarf_Word ret;
-
-	if (die_get_attr_udata(tp_die, DW_AT_bit_size, &ret))
-		return 0;
-
-	return (int)ret;
-}
-
-static int die_get_bit_offset(Dwarf_Die *tp_die)
-{
-	Dwarf_Word ret;
-
-	if (die_get_attr_udata(tp_die, DW_AT_bit_offset, &ret))
-		return 0;
-
-	return (int)ret;
-}
-
-/* Get data_member_location offset */
-static int die_get_data_member_location(Dwarf_Die *mb_die, Dwarf_Word *offs)
-{
-	Dwarf_Attribute attr;
-	Dwarf_Op *expr;
-	size_t nexpr;
-	int ret;
-
-	if (dwarf_attr(mb_die, DW_AT_data_member_location, &attr) == NULL)
-		return -ENOENT;
-
-	if (dwarf_formudata(&attr, offs) != 0) {
-		/* DW_AT_data_member_location should be DW_OP_plus_uconst */
-		ret = dwarf_getlocation(&attr, &expr, &nexpr);
-		if (ret < 0 || nexpr == 0)
-			return -ENOENT;
-
-		if (expr[0].atom != DW_OP_plus_uconst || nexpr != 1) {
-			pr_debug("Unable to get offset:Unexpected OP %x (%zd)\n",
-				 expr[0].atom, nexpr);
-			return -ENOTSUP;
-		}
-		*offs = (Dwarf_Word)expr[0].number;
-	}
-	return 0;
-}
-
-/* Return values for die_find callbacks */
-enum {
-	DIE_FIND_CB_FOUND = 0,		/* End of Search */
-	DIE_FIND_CB_CHILD = 1,		/* Search only children */
-	DIE_FIND_CB_SIBLING = 2,	/* Search only siblings */
-	DIE_FIND_CB_CONTINUE = 3,	/* Search children and siblings */
-};
-
-/* Search a child die */
-static Dwarf_Die *die_find_child(Dwarf_Die *rt_die,
-				 int (*callback)(Dwarf_Die *, void *),
-				 void *data, Dwarf_Die *die_mem)
+struct debuginfo *debuginfo__new(const char *path)
 {
-	Dwarf_Die child_die;
-	int ret;
-
-	ret = dwarf_child(rt_die, die_mem);
-	if (ret != 0)
+	struct debuginfo *self = zalloc(sizeof(struct debuginfo));
+	if (!self)
 		return NULL;
 
-	do {
-		ret = callback(die_mem, data);
-		if (ret == DIE_FIND_CB_FOUND)
-			return die_mem;
-
-		if ((ret & DIE_FIND_CB_CHILD) &&
-		    die_find_child(die_mem, callback, data, &child_die)) {
-			memcpy(die_mem, &child_die, sizeof(Dwarf_Die));
-			return die_mem;
-		}
-	} while ((ret & DIE_FIND_CB_SIBLING) &&
-		 dwarf_siblingof(die_mem, die_mem) == 0);
-
-	return NULL;
-}
-
-struct __addr_die_search_param {
-	Dwarf_Addr	addr;
-	Dwarf_Die	*die_mem;
-};
-
-static int __die_search_func_cb(Dwarf_Die *fn_die, void *data)
-{
-	struct __addr_die_search_param *ad = data;
-
-	if (dwarf_tag(fn_die) == DW_TAG_subprogram &&
-	    dwarf_haspc(fn_die, ad->addr)) {
-		memcpy(ad->die_mem, fn_die, sizeof(Dwarf_Die));
-		return DWARF_CB_ABORT;
+	if (debuginfo__init_offline_dwarf(self, path) < 0) {
+		free(self);
+		self = NULL;
 	}
-	return DWARF_CB_OK;
-}
-
-/* Search a real subprogram including this line, */
-static Dwarf_Die *die_find_real_subprogram(Dwarf_Die *cu_die, Dwarf_Addr addr,
-					   Dwarf_Die *die_mem)
-{
-	struct __addr_die_search_param ad;
-	ad.addr = addr;
-	ad.die_mem = die_mem;
-	/* dwarf_getscopes can't find subprogram. */
-	if (!dwarf_getfuncs(cu_die, __die_search_func_cb, &ad, 0))
-		return NULL;
-	else
-		return die_mem;
-}
-
-/* die_find callback for inline function search */
-static int __die_find_inline_cb(Dwarf_Die *die_mem, void *data)
-{
-	Dwarf_Addr *addr = data;
-
-	if (dwarf_tag(die_mem) == DW_TAG_inlined_subroutine &&
-	    dwarf_haspc(die_mem, *addr))
-		return DIE_FIND_CB_FOUND;
 
-	return DIE_FIND_CB_CONTINUE;
+	return self;
 }
 
-/* Similar to dwarf_getfuncs, but returns inlined_subroutine if exists. */
-static Dwarf_Die *die_find_inlinefunc(Dwarf_Die *sp_die, Dwarf_Addr addr,
-				      Dwarf_Die *die_mem)
+struct debuginfo *debuginfo__new_online_kernel(unsigned long addr)
 {
-	Dwarf_Die tmp_die;
-
-	sp_die = die_find_child(sp_die, __die_find_inline_cb, &addr, &tmp_die);
-	if (!sp_die)
+	struct debuginfo *self = zalloc(sizeof(struct debuginfo));
+	if (!self)
 		return NULL;
 
-	/* Inlined function could be recursive. Trace it until fail */
-	while (sp_die) {
-		memcpy(die_mem, sp_die, sizeof(Dwarf_Die));
-		sp_die = die_find_child(sp_die, __die_find_inline_cb, &addr,
-					&tmp_die);
-	}
-
-	return die_mem;
-}
-
-/* Walker on lines (Note: line number will not be sorted) */
-typedef int (* line_walk_handler_t) (const char *fname, int lineno,
-				     Dwarf_Addr addr, void *data);
-
-struct __line_walk_param {
-	const char *fname;
-	line_walk_handler_t handler;
-	void *data;
-	int retval;
-};
-
-static int __die_walk_funclines_cb(Dwarf_Die *in_die, void *data)
-{
-	struct __line_walk_param *lw = data;
-	Dwarf_Addr addr;
-	int lineno;
-
-	if (dwarf_tag(in_die) == DW_TAG_inlined_subroutine) {
-		lineno = die_get_call_lineno(in_die);
-		if (lineno > 0 && dwarf_entrypc(in_die, &addr) == 0) {
-			lw->retval = lw->handler(lw->fname, lineno, addr,
-						 lw->data);
-			if (lw->retval != 0)
-				return DIE_FIND_CB_FOUND;
-		}
-	}
-	return DIE_FIND_CB_SIBLING;
-}
-
-/* Walk on lines of blocks included in given DIE */
-static int __die_walk_funclines(Dwarf_Die *sp_die,
-				line_walk_handler_t handler, void *data)
-{
-	struct __line_walk_param lw = {
-		.handler = handler,
-		.data = data,
-		.retval = 0,
-	};
-	Dwarf_Die die_mem;
-	Dwarf_Addr addr;
-	int lineno;
-
-	/* Handle function declaration line */
-	lw.fname = dwarf_decl_file(sp_die);
-	if (lw.fname && dwarf_decl_line(sp_die, &lineno) == 0 &&
-	    dwarf_entrypc(sp_die, &addr) == 0) {
-		lw.retval = handler(lw.fname, lineno, addr, data);
-		if (lw.retval != 0)
-			goto done;
-	}
-	die_find_child(sp_die, __die_walk_funclines_cb, &lw, &die_mem);
-done:
-	return lw.retval;
-}
-
-static int __die_walk_culines_cb(Dwarf_Die *sp_die, void *data)
-{
-	struct __line_walk_param *lw = data;
-
-	lw->retval = __die_walk_funclines(sp_die, lw->handler, lw->data);
-	if (lw->retval != 0)
-		return DWARF_CB_ABORT;
-
-	return DWARF_CB_OK;
-}
-
-/*
- * Walk on lines inside given PDIE. If the PDIE is subprogram, walk only on
- * the lines inside the subprogram, otherwise PDIE must be a CU DIE.
- */
-static int die_walk_lines(Dwarf_Die *pdie, line_walk_handler_t handler,
-			  void *data)
-{
-	Dwarf_Lines *lines;
-	Dwarf_Line *line;
-	Dwarf_Addr addr;
-	const char *fname;
-	int lineno, ret = 0;
-	Dwarf_Die die_mem, *cu_die;
-	size_t nlines, i;
-
-	/* Get the CU die */
-	if (dwarf_tag(pdie) == DW_TAG_subprogram)
-		cu_die = dwarf_diecu(pdie, &die_mem, NULL, NULL);
-	else
-		cu_die = pdie;
-	if (!cu_die) {
-		pr_debug2("Failed to get CU from subprogram\n");
-		return -EINVAL;
-	}
-
-	/* Get lines list in the CU */
-	if (dwarf_getsrclines(cu_die, &lines, &nlines) != 0) {
-		pr_debug2("Failed to get source lines on this CU.\n");
-		return -ENOENT;
-	}
-	pr_debug2("Get %zd lines from this CU\n", nlines);
-
-	/* Walk on the lines on lines list */
-	for (i = 0; i < nlines; i++) {
-		line = dwarf_onesrcline(lines, i);
-		if (line == NULL ||
-		    dwarf_lineno(line, &lineno) != 0 ||
-		    dwarf_lineaddr(line, &addr) != 0) {
-			pr_debug2("Failed to get line info. "
-				  "Possible error in debuginfo.\n");
-			continue;
-		}
-		/* Filter lines based on address */
-		if (pdie != cu_die)
-			/*
-			 * Address filtering
-			 * The line is included in given function, and
-			 * no inline block includes it.
-			 */
-			if (!dwarf_haspc(pdie, addr) ||
-			    die_find_inlinefunc(pdie, addr, &die_mem))
-				continue;
-		/* Get source line */
-		fname = dwarf_linesrc(line, NULL, NULL);
-
-		ret = handler(fname, lineno, addr, data);
-		if (ret != 0)
-			return ret;
-	}
-
-	/*
-	 * Dwarf lines doesn't include function declarations and inlined
-	 * subroutines. We have to check functions list or given function.
-	 */
-	if (pdie != cu_die)
-		ret = __die_walk_funclines(pdie, handler, data);
-	else {
-		struct __line_walk_param param = {
-			.handler = handler,
-			.data = data,
-			.retval = 0,
-		};
-		dwarf_getfuncs(cu_die, __die_walk_culines_cb, &param, 0);
-		ret = param.retval;
+	if (debuginfo__init_online_kernel_dwarf(self, (Dwarf_Addr)addr) < 0) {
+		free(self);
+		self = NULL;
 	}
 
-	return ret;
-}
-
-struct __find_variable_param {
-	const char *name;
-	Dwarf_Addr addr;
-};
-
-static int __die_find_variable_cb(Dwarf_Die *die_mem, void *data)
-{
-	struct __find_variable_param *fvp = data;
-	int tag;
-
-	tag = dwarf_tag(die_mem);
-	if ((tag == DW_TAG_formal_parameter ||
-	     tag == DW_TAG_variable) &&
-	    die_compare_name(die_mem, fvp->name))
-		return DIE_FIND_CB_FOUND;
-
-	if (dwarf_haspc(die_mem, fvp->addr))
-		return DIE_FIND_CB_CONTINUE;
-	else
-		return DIE_FIND_CB_SIBLING;
-}
-
-/* Find a variable called 'name' at given address */
-static Dwarf_Die *die_find_variable_at(Dwarf_Die *sp_die, const char *name,
-				       Dwarf_Addr addr, Dwarf_Die *die_mem)
-{
-	struct __find_variable_param fvp = { .name = name, .addr = addr};
-
-	return die_find_child(sp_die, __die_find_variable_cb, (void *)&fvp,
-			      die_mem);
-}
-
-static int __die_find_member_cb(Dwarf_Die *die_mem, void *data)
-{
-	const char *name = data;
-
-	if ((dwarf_tag(die_mem) == DW_TAG_member) &&
-	    die_compare_name(die_mem, name))
-		return DIE_FIND_CB_FOUND;
-
-	return DIE_FIND_CB_SIBLING;
-}
-
-/* Find a member called 'name' */
-static Dwarf_Die *die_find_member(Dwarf_Die *st_die, const char *name,
-				  Dwarf_Die *die_mem)
-{
-	return die_find_child(st_die, __die_find_member_cb, (void *)name,
-			      die_mem);
-}
-
-/* Get the name of given variable DIE */
-static int die_get_typename(Dwarf_Die *vr_die, char *buf, int len)
-{
-	Dwarf_Die type;
-	int tag, ret, ret2;
-	const char *tmp = "";
-
-	if (__die_get_real_type(vr_die, &type) == NULL)
-		return -ENOENT;
-
-	tag = dwarf_tag(&type);
-	if (tag == DW_TAG_array_type || tag == DW_TAG_pointer_type)
-		tmp = "*";
-	else if (tag == DW_TAG_subroutine_type) {
-		/* Function pointer */
-		ret = snprintf(buf, len, "(function_type)");
-		return (ret >= len) ? -E2BIG : ret;
-	} else {
-		if (!dwarf_diename(&type))
-			return -ENOENT;
-		if (tag == DW_TAG_union_type)
-			tmp = "union ";
-		else if (tag == DW_TAG_structure_type)
-			tmp = "struct ";
-		/* Write a base name */
-		ret = snprintf(buf, len, "%s%s", tmp, dwarf_diename(&type));
-		return (ret >= len) ? -E2BIG : ret;
-	}
-	ret = die_get_typename(&type, buf, len);
-	if (ret > 0) {
-		ret2 = snprintf(buf + ret, len - ret, "%s", tmp);
-		ret = (ret2 >= len - ret) ? -E2BIG : ret2 + ret;
-	}
-	return ret;
+	return self;
 }
 
-/* Get the name and type of given variable DIE, stored as "type\tname" */
-static int die_get_varname(Dwarf_Die *vr_die, char *buf, int len)
+void debuginfo__delete(struct debuginfo *self)
 {
-	int ret, ret2;
-
-	ret = die_get_typename(vr_die, buf, len);
-	if (ret < 0) {
-		pr_debug("Failed to get type, make it unknown.\n");
-		ret = snprintf(buf, len, "(unknown_type)");
+	if (self) {
+		if (self->dwfl)
+			dwfl_end(self->dwfl);
+		free(self);
 	}
-	if (ret > 0) {
-		ret2 = snprintf(buf + ret, len - ret, "\t%s",
-				dwarf_diename(vr_die));
-		ret = (ret2 >= len - ret) ? -E2BIG : ret2 + ret;
-	}
-	return ret;
 }
 
 /*
@@ -897,6 +374,7 @@ static int convert_variable_type(Dwarf_Die *vr_die,
 	struct probe_trace_arg_ref **ref_ptr = &tvar->ref;
 	Dwarf_Die type;
 	char buf[16];
+	int bsize, boffs, total;
 	int ret;
 
 	/* TODO: check all types */
@@ -906,11 +384,15 @@ static int convert_variable_type(Dwarf_Die *vr_die,
 		return (tvar->type == NULL) ? -ENOMEM : 0;
 	}
 
-	if (die_get_bit_size(vr_die) != 0) {
+	bsize = dwarf_bitsize(vr_die);
+	if (bsize > 0) {
 		/* This is a bitfield */
-		ret = snprintf(buf, 16, "b%d@%d/%zd", die_get_bit_size(vr_die),
-				die_get_bit_offset(vr_die),
-				BYTES_TO_BITS(die_get_byte_size(vr_die)));
+		boffs = dwarf_bitoffset(vr_die);
+		total = dwarf_bytesize(vr_die);
+		if (boffs < 0 || total < 0)
+			return -ENOENT;
+		ret = snprintf(buf, 16, "b%d@%d/%zd", bsize, boffs,
+				BYTES_TO_BITS(total));
 		goto formatted;
 	}
 
@@ -958,10 +440,11 @@ static int convert_variable_type(Dwarf_Die *vr_die,
 		return (tvar->type == NULL) ? -ENOMEM : 0;
 	}
 
-	ret = BYTES_TO_BITS(die_get_byte_size(&type));
-	if (!ret)
+	ret = dwarf_bytesize(&type);
+	if (ret <= 0)
 		/* No size ... try to use default type */
 		return 0;
+	ret = BYTES_TO_BITS(ret);
 
 	/* Check the bitwidth */
 	if (ret > MAX_BASIC_TYPE_BITS) {
@@ -1025,7 +508,7 @@ static int convert_variable_fields(Dwarf_Die *vr_die, const char *varname,
 			else
 				*ref_ptr = ref;
 		}
-		ref->offset += die_get_byte_size(&type) * field->index;
+		ref->offset += dwarf_bytesize(&type) * field->index;
 		if (!field->next)
 			/* Save vr_die for converting types */
 			memcpy(die_mem, vr_die, sizeof(*die_mem));
@@ -1245,8 +728,7 @@ static int call_probe_finder(Dwarf_Die *sp_die, struct probe_finder *pf)
 
 	/* If no real subprogram, find a real one */
 	if (!sp_die || dwarf_tag(sp_die) != DW_TAG_subprogram) {
-		sp_die = die_find_real_subprogram(&pf->cu_die,
-						  pf->addr, &die_mem);
+		sp_die = die_find_realfunc(&pf->cu_die, pf->addr, &die_mem);
 		if (!sp_die) {
 			pr_warning("Failed to find probe point in any "
 				   "functions.\n");
@@ -1504,28 +986,18 @@ static int pubname_search_cb(Dwarf *dbg, Dwarf_Global *gl, void *data)
 }
 
 /* Find probe points from debuginfo */
-static int find_probes(int fd, struct probe_finder *pf)
+static int debuginfo__find_probes(struct debuginfo *self,
+				  struct probe_finder *pf)
 {
 	struct perf_probe_point *pp = &pf->pev->point;
 	Dwarf_Off off, noff;
 	size_t cuhl;
 	Dwarf_Die *diep;
-	Dwarf *dbg = NULL;
-	Dwfl *dwfl;
-	Dwarf_Addr bias;	/* Currently ignored */
 	int ret = 0;
 
-	dbg = dwfl_init_offline_dwarf(fd, &dwfl, &bias);
-	if (!dbg) {
-		pr_warning("No debug information found in the vmlinux - "
-			"please rebuild with CONFIG_DEBUG_INFO=y.\n");
-		close(fd);	/* Without dwfl_end(), fd isn't closed. */
-		return -EBADF;
-	}
-
 #if _ELFUTILS_PREREQ(0, 142)
 	/* Get the call frame information from this dwarf */
-	pf->cfi = dwarf_getcfi(dbg);
+	pf->cfi = dwarf_getcfi(self->dbg);
 #endif
 
 	off = 0;
@@ -1544,7 +1016,8 @@ static int find_probes(int fd, struct probe_finder *pf)
 			.data = pf,
 		};
 
-		dwarf_getpubnames(dbg, pubname_search_cb, &pubname_param, 0);
+		dwarf_getpubnames(self->dbg, pubname_search_cb,
+				  &pubname_param, 0);
 		if (pubname_param.found) {
 			ret = probe_point_search_cb(&pf->sp_die, &probe_param);
 			if (ret)
@@ -1553,9 +1026,9 @@ static int find_probes(int fd, struct probe_finder *pf)
 	}
 
 	/* Loop on CUs (Compilation Unit) */
-	while (!dwarf_nextcu(dbg, off, &noff, &cuhl, NULL, NULL, NULL)) {
+	while (!dwarf_nextcu(self->dbg, off, &noff, &cuhl, NULL, NULL, NULL)) {
 		/* Get the DIE(Debugging Information Entry) of this CU */
-		diep = dwarf_offdie(dbg, off + cuhl, &pf->cu_die);
+		diep = dwarf_offdie(self->dbg, off + cuhl, &pf->cu_die);
 		if (!diep)
 			continue;
 
@@ -1582,8 +1055,6 @@ static int find_probes(int fd, struct probe_finder *pf)
 
 found:
 	line_list__free(&pf->lcache);
-	if (dwfl)
-		dwfl_end(dwfl);
 
 	return ret;
 }
@@ -1629,8 +1100,9 @@ static int add_probe_trace_event(Dwarf_Die *sp_die, struct probe_finder *pf)
 }
 
 /* Find probe_trace_events specified by perf_probe_event from debuginfo */
-int find_probe_trace_events(int fd, struct perf_probe_event *pev,
-			    struct probe_trace_event **tevs, int max_tevs)
+int debuginfo__find_trace_events(struct debuginfo *self,
+				 struct perf_probe_event *pev,
+				 struct probe_trace_event **tevs, int max_tevs)
 {
 	struct trace_event_finder tf = {
 			.pf = {.pev = pev, .callback = add_probe_trace_event},
@@ -1645,7 +1117,7 @@ int find_probe_trace_events(int fd, struct perf_probe_event *pev,
 	tf.tevs = *tevs;
 	tf.ntevs = 0;
 
-	ret = find_probes(fd, &tf.pf);
+	ret = debuginfo__find_probes(self, &tf.pf);
 	if (ret < 0) {
 		free(*tevs);
 		*tevs = NULL;
@@ -1739,9 +1211,10 @@ out:
 }
 
 /* Find available variables at given probe point */
-int find_available_vars_at(int fd, struct perf_probe_event *pev,
-			   struct variable_list **vls, int max_vls,
-			   bool externs)
+int debuginfo__find_available_vars_at(struct debuginfo *self,
+				      struct perf_probe_event *pev,
+				      struct variable_list **vls,
+				      int max_vls, bool externs)
 {
 	struct available_var_finder af = {
 			.pf = {.pev = pev, .callback = add_available_vars},
@@ -1756,7 +1229,7 @@ int find_available_vars_at(int fd, struct perf_probe_event *pev,
 	af.vls = *vls;
 	af.nvls = 0;
 
-	ret = find_probes(fd, &af.pf);
+	ret = debuginfo__find_probes(self, &af.pf);
 	if (ret < 0) {
 		/* Free vlist for error */
 		while (af.nvls--) {
@@ -1774,28 +1247,19 @@ int find_available_vars_at(int fd, struct perf_probe_event *pev,
 }
 
 /* Reverse search */
-int find_perf_probe_point(unsigned long addr, struct perf_probe_point *ppt)
+int debuginfo__find_probe_point(struct debuginfo *self, unsigned long addr,
+				struct perf_probe_point *ppt)
 {
 	Dwarf_Die cudie, spdie, indie;
-	Dwarf *dbg = NULL;
-	Dwfl *dwfl = NULL;
-	Dwarf_Addr _addr, baseaddr, bias = 0;
+	Dwarf_Addr _addr, baseaddr;
 	const char *fname = NULL, *func = NULL, *tmp;
 	int baseline = 0, lineno = 0, ret = 0;
 
-	/* Open the live linux kernel */
-	dbg = dwfl_init_live_kernel_dwarf(addr, &dwfl, &bias);
-	if (!dbg) {
-		pr_warning("No debug information found in the vmlinux - "
-			"please rebuild with CONFIG_DEBUG_INFO=y.\n");
-		ret = -EINVAL;
-		goto end;
-	}
-
 	/* Adjust address with bias */
-	addr += bias;
+	addr += self->bias;
+
 	/* Find cu die */
-	if (!dwarf_addrdie(dbg, (Dwarf_Addr)addr - bias, &cudie)) {
+	if (!dwarf_addrdie(self->dbg, (Dwarf_Addr)addr - self->bias, &cudie)) {
 		pr_warning("Failed to find debug information for address %lx\n",
 			   addr);
 		ret = -EINVAL;
@@ -1807,7 +1271,7 @@ int find_perf_probe_point(unsigned long addr, struct perf_probe_point *ppt)
 	/* Don't care whether it failed or not */
 
 	/* Find a corresponding function (name, baseline and baseaddr) */
-	if (die_find_real_subprogram(&cudie, (Dwarf_Addr)addr, &spdie)) {
+	if (die_find_realfunc(&cudie, (Dwarf_Addr)addr, &spdie)) {
 		/* Get function entry information */
 		tmp = dwarf_diename(&spdie);
 		if (!tmp ||
@@ -1871,8 +1335,6 @@ post:
 		}
 	}
 end:
-	if (dwfl)
-		dwfl_end(dwfl);
 	if (ret == 0 && (fname || func))
 		ret = 1;	/* Found a point */
 	return ret;
@@ -1982,26 +1444,15 @@ static int find_line_range_by_func(struct line_finder *lf)
 	return param.retval;
 }
 
-int find_line_range(int fd, struct line_range *lr)
+int debuginfo__find_line_range(struct debuginfo *self, struct line_range *lr)
 {
 	struct line_finder lf = {.lr = lr, .found = 0};
 	int ret = 0;
 	Dwarf_Off off = 0, noff;
 	size_t cuhl;
 	Dwarf_Die *diep;
-	Dwarf *dbg = NULL;
-	Dwfl *dwfl;
-	Dwarf_Addr bias;	/* Currently ignored */
 	const char *comp_dir;
 
-	dbg = dwfl_init_offline_dwarf(fd, &dwfl, &bias);
-	if (!dbg) {
-		pr_warning("No debug information found in the vmlinux - "
-			"please rebuild with CONFIG_DEBUG_INFO=y.\n");
-		close(fd);	/* Without dwfl_end(), fd isn't closed. */
-		return -EBADF;
-	}
-
 	/* Fastpath: lookup by function name from .debug_pubnames section */
 	if (lr->function) {
 		struct pubname_callback_param pubname_param = {
@@ -2010,7 +1461,8 @@ int find_line_range(int fd, struct line_range *lr)
 		struct dwarf_callback_param line_range_param = {
 			.data = (void *)&lf, .retval = 0};
 
-		dwarf_getpubnames(dbg, pubname_search_cb, &pubname_param, 0);
+		dwarf_getpubnames(self->dbg, pubname_search_cb,
+				  &pubname_param, 0);
 		if (pubname_param.found) {
 			line_range_search_cb(&lf.sp_die, &line_range_param);
 			if (lf.found)
@@ -2020,11 +1472,12 @@ int find_line_range(int fd, struct line_range *lr)
 
 	/* Loop on CUs (Compilation Unit) */
 	while (!lf.found && ret >= 0) {
-		if (dwarf_nextcu(dbg, off, &noff, &cuhl, NULL, NULL, NULL) != 0)
+		if (dwarf_nextcu(self->dbg, off, &noff, &cuhl,
+				 NULL, NULL, NULL) != 0)
 			break;
 
 		/* Get the DIE(Debugging Information Entry) of this CU */
-		diep = dwarf_offdie(dbg, off + cuhl, &lf.cu_die);
+		diep = dwarf_offdie(self->dbg, off + cuhl, &lf.cu_die);
 		if (!diep)
 			continue;
 
@@ -2058,7 +1511,6 @@ found:
 	}
 
 	pr_debug("path: %s\n", lr->path);
-	dwfl_end(dwfl);
 	return (ret < 0) ? ret : lf.found;
 }
 
diff --git a/tools/perf/util/probe-finder.h b/tools/perf/util/probe-finder.h
index 605730a366db..c478b42a2473 100644
--- a/tools/perf/util/probe-finder.h
+++ b/tools/perf/util/probe-finder.h
@@ -16,27 +16,42 @@ static inline int is_c_varname(const char *name)
 }
 
 #ifdef DWARF_SUPPORT
+
+#include "dwarf-aux.h"
+
+/* TODO: export debuginfo data structure even if no dwarf support */
+
+/* debug information structure */
+struct debuginfo {
+	Dwarf		*dbg;
+	Dwfl		*dwfl;
+	Dwarf_Addr	bias;
+};
+
+extern struct debuginfo *debuginfo__new(const char *path);
+extern struct debuginfo *debuginfo__new_online_kernel(unsigned long addr);
+extern void debuginfo__delete(struct debuginfo *self);
+
 /* Find probe_trace_events specified by perf_probe_event from debuginfo */
-extern int find_probe_trace_events(int fd, struct perf_probe_event *pev,
-				    struct probe_trace_event **tevs,
-				    int max_tevs);
+extern int debuginfo__find_trace_events(struct debuginfo *self,
+					struct perf_probe_event *pev,
+					struct probe_trace_event **tevs,
+					int max_tevs);
 
 /* Find a perf_probe_point from debuginfo */
-extern int find_perf_probe_point(unsigned long addr,
-				 struct perf_probe_point *ppt);
+extern int debuginfo__find_probe_point(struct debuginfo *self,
+				       unsigned long addr,
+				       struct perf_probe_point *ppt);
 
 /* Find a line range */
-extern int find_line_range(int fd, struct line_range *lr);
+extern int debuginfo__find_line_range(struct debuginfo *self,
+				      struct line_range *lr);
 
 /* Find available variables */
-extern int find_available_vars_at(int fd, struct perf_probe_event *pev,
-				  struct variable_list **vls, int max_points,
-				  bool externs);
-
-#include <dwarf.h>
-#include <elfutils/libdw.h>
-#include <elfutils/libdwfl.h>
-#include <elfutils/version.h>
+extern int debuginfo__find_available_vars_at(struct debuginfo *self,
+					     struct perf_probe_event *pev,
+					     struct variable_list **vls,
+					     int max_points, bool externs);
 
 struct probe_finder {
 	struct perf_probe_event	*pev;		/* Target probe event */
diff --git a/tools/perf/util/python.c b/tools/perf/util/python.c
index a9ac0504aabd..8e0b5a39d8a7 100644
--- a/tools/perf/util/python.c
+++ b/tools/perf/util/python.c
@@ -247,7 +247,7 @@ struct pyrf_cpu_map {
 static int pyrf_cpu_map__init(struct pyrf_cpu_map *pcpus,
 			      PyObject *args, PyObject *kwargs)
 {
-	static char *kwlist[] = { "cpustr", NULL, NULL, };
+	static char *kwlist[] = { "cpustr", NULL };
 	char *cpustr = NULL;
 
 	if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|s",
@@ -316,7 +316,7 @@ struct pyrf_thread_map {
 static int pyrf_thread_map__init(struct pyrf_thread_map *pthreads,
 				 PyObject *args, PyObject *kwargs)
 {
-	static char *kwlist[] = { "pid", "tid", NULL, NULL, };
+	static char *kwlist[] = { "pid", "tid", NULL };
 	int pid = -1, tid = -1;
 
 	if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|ii",
@@ -418,7 +418,9 @@ static int pyrf_evsel__init(struct pyrf_evsel *pevsel,
 		"wakeup_events",
 		"bp_type",
 		"bp_addr",
-		"bp_len", NULL, NULL, };
+		"bp_len",
+		 NULL
+	};
 	u64 sample_period = 0;
 	u32 disabled = 0,
 	    inherit = 0,
@@ -499,7 +501,7 @@ static PyObject *pyrf_evsel__open(struct pyrf_evsel *pevsel,
 	struct thread_map *threads = NULL;
 	PyObject *pcpus = NULL, *pthreads = NULL;
 	int group = 0, inherit = 0;
-	static char *kwlist[] = {"cpus", "threads", "group", "inherit", NULL, NULL};
+	static char *kwlist[] = { "cpus", "threads", "group", "inherit", NULL };
 
 	if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|OOii", kwlist,
 					 &pcpus, &pthreads, &group, &inherit))
@@ -582,8 +584,7 @@ static PyObject *pyrf_evlist__mmap(struct pyrf_evlist *pevlist,
 				   PyObject *args, PyObject *kwargs)
 {
 	struct perf_evlist *evlist = &pevlist->evlist;
-	static char *kwlist[] = {"pages", "overwrite",
-				  NULL, NULL};
+	static char *kwlist[] = { "pages", "overwrite", NULL };
 	int pages = 128, overwrite = false;
 
 	if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|ii", kwlist,
@@ -603,7 +604,7 @@ static PyObject *pyrf_evlist__poll(struct pyrf_evlist *pevlist,
 				   PyObject *args, PyObject *kwargs)
 {
 	struct perf_evlist *evlist = &pevlist->evlist;
-	static char *kwlist[] = {"timeout", NULL, NULL};
+	static char *kwlist[] = { "timeout", NULL };
 	int timeout = -1, n;
 
 	if (!PyArg_ParseTupleAndKeywords(args, kwargs, "|i", kwlist, &timeout))
@@ -674,7 +675,7 @@ static PyObject *pyrf_evlist__read_on_cpu(struct pyrf_evlist *pevlist,
 	struct perf_evlist *evlist = &pevlist->evlist;
 	union perf_event *event;
 	int sample_id_all = 1, cpu;
-	static char *kwlist[] = {"cpu", "sample_id_all", NULL, NULL};
+	static char *kwlist[] = { "cpu", "sample_id_all", NULL };
 	int err;
 
 	if (!PyArg_ParseTupleAndKeywords(args, kwargs, "i|i", kwlist,
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index f5a8fbdd3f76..72458d9da5b1 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -12,6 +12,7 @@
 #include "session.h"
 #include "sort.h"
 #include "util.h"
+#include "cpumap.h"
 
 static int perf_session__open(struct perf_session *self, bool force)
 {
@@ -247,9 +248,14 @@ int perf_session__resolve_callchain(struct perf_session *self,
 	callchain_cursor_reset(&self->callchain_cursor);
 
 	for (i = 0; i < chain->nr; i++) {
-		u64 ip = chain->ips[i];
+		u64 ip;
 		struct addr_location al;
 
+		if (callchain_param.order == ORDER_CALLEE)
+			ip = chain->ips[i];
+		else
+			ip = chain->ips[chain->nr - i - 1];
+
 		if (ip >= PERF_CONTEXT_MAX) {
 			switch (ip) {
 			case PERF_CONTEXT_HV:
@@ -407,20 +413,26 @@ static void perf_event__read_swap(union perf_event *event)
 	event->read.id		 = bswap_64(event->read.id);
 }
 
-static void perf_event__attr_swap(union perf_event *event)
+/* exported for swapping attributes in file header */
+void perf_event__attr_swap(struct perf_event_attr *attr)
+{
+	attr->type		= bswap_32(attr->type);
+	attr->size		= bswap_32(attr->size);
+	attr->config		= bswap_64(attr->config);
+	attr->sample_period	= bswap_64(attr->sample_period);
+	attr->sample_type	= bswap_64(attr->sample_type);
+	attr->read_format	= bswap_64(attr->read_format);
+	attr->wakeup_events	= bswap_32(attr->wakeup_events);
+	attr->bp_type		= bswap_32(attr->bp_type);
+	attr->bp_addr		= bswap_64(attr->bp_addr);
+	attr->bp_len		= bswap_64(attr->bp_len);
+}
+
+static void perf_event__hdr_attr_swap(union perf_event *event)
 {
 	size_t size;
 
-	event->attr.attr.type		= bswap_32(event->attr.attr.type);
-	event->attr.attr.size		= bswap_32(event->attr.attr.size);
-	event->attr.attr.config		= bswap_64(event->attr.attr.config);
-	event->attr.attr.sample_period	= bswap_64(event->attr.attr.sample_period);
-	event->attr.attr.sample_type	= bswap_64(event->attr.attr.sample_type);
-	event->attr.attr.read_format	= bswap_64(event->attr.attr.read_format);
-	event->attr.attr.wakeup_events	= bswap_32(event->attr.attr.wakeup_events);
-	event->attr.attr.bp_type	= bswap_32(event->attr.attr.bp_type);
-	event->attr.attr.bp_addr	= bswap_64(event->attr.attr.bp_addr);
-	event->attr.attr.bp_len		= bswap_64(event->attr.attr.bp_len);
+	perf_event__attr_swap(&event->attr.attr);
 
 	size = event->header.size;
 	size -= (void *)&event->attr.id - (void *)event;
@@ -448,7 +460,7 @@ static perf_event__swap_op perf_event__swap_ops[] = {
 	[PERF_RECORD_LOST]		  = perf_event__all64_swap,
 	[PERF_RECORD_READ]		  = perf_event__read_swap,
 	[PERF_RECORD_SAMPLE]		  = perf_event__all64_swap,
-	[PERF_RECORD_HEADER_ATTR]	  = perf_event__attr_swap,
+	[PERF_RECORD_HEADER_ATTR]	  = perf_event__hdr_attr_swap,
 	[PERF_RECORD_HEADER_EVENT_TYPE]	  = perf_event__event_type_swap,
 	[PERF_RECORD_HEADER_TRACING_DATA] = perf_event__tracing_data_swap,
 	[PERF_RECORD_HEADER_BUILD_ID]	  = NULL,
@@ -708,9 +720,9 @@ static void dump_sample(struct perf_session *session, union perf_event *event,
 	if (!dump_trace)
 		return;
 
-	printf("(IP, %d): %d/%d: %#" PRIx64 " period: %" PRIu64 "\n",
+	printf("(IP, %d): %d/%d: %#" PRIx64 " period: %" PRIu64 " addr: %#" PRIx64 "\n",
 	       event->header.misc, sample->pid, sample->tid, sample->ip,
-	       sample->period);
+	       sample->period, sample->addr);
 
 	if (session->sample_type & PERF_SAMPLE_CALLCHAIN)
 		callchain__printf(sample);
@@ -1202,9 +1214,10 @@ struct perf_evsel *perf_session__find_first_evtype(struct perf_session *session,
 	return NULL;
 }
 
-void perf_session__print_symbols(union perf_event *event,
-				struct perf_sample *sample,
-				struct perf_session *session)
+void perf_session__print_ip(union perf_event *event,
+			    struct perf_sample *sample,
+			    struct perf_session *session,
+			    int print_sym, int print_dso)
 {
 	struct addr_location al;
 	const char *symname, *dsoname;
@@ -1233,32 +1246,83 @@ void perf_session__print_symbols(union perf_event *event,
 			if (!node)
 				break;
 
-			if (node->sym && node->sym->name)
-				symname = node->sym->name;
+			printf("\t%16" PRIx64, node->ip);
+			if (print_sym) {
+				if (node->sym && node->sym->name)
+					symname = node->sym->name;
+				else
+					symname = "";
+
+				printf(" %s", symname);
+			}
+			if (print_dso) {
+				if (node->map && node->map->dso && node->map->dso->name)
+					dsoname = node->map->dso->name;
+				else
+					dsoname = "";
+
+				printf(" (%s)", dsoname);
+			}
+			printf("\n");
+
+			callchain_cursor_advance(cursor);
+		}
+
+	} else {
+		printf("%16" PRIx64, sample->ip);
+		if (print_sym) {
+			if (al.sym && al.sym->name)
+				symname = al.sym->name;
 			else
 				symname = "";
 
-			if (node->map && node->map->dso && node->map->dso->name)
-				dsoname = node->map->dso->name;
+			printf(" %s", symname);
+		}
+
+		if (print_dso) {
+			if (al.map && al.map->dso && al.map->dso->name)
+				dsoname = al.map->dso->name;
 			else
 				dsoname = "";
 
-			printf("\t%16" PRIx64 " %s (%s)\n", node->ip, symname, dsoname);
+			printf(" (%s)", dsoname);
+		}
+	}
+}
 
-			callchain_cursor_advance(cursor);
+int perf_session__cpu_bitmap(struct perf_session *session,
+			     const char *cpu_list, unsigned long *cpu_bitmap)
+{
+	int i;
+	struct cpu_map *map;
+
+	for (i = 0; i < PERF_TYPE_MAX; ++i) {
+		struct perf_evsel *evsel;
+
+		evsel = perf_session__find_first_evtype(session, i);
+		if (!evsel)
+			continue;
+
+		if (!(evsel->attr.sample_type & PERF_SAMPLE_CPU)) {
+			pr_err("File does not contain CPU events. "
+			       "Remove -c option to proceed.\n");
+			return -1;
 		}
+	}
 
-	} else {
-		if (al.sym && al.sym->name)
-			symname = al.sym->name;
-		else
-			symname = "";
+	map = cpu_map__new(cpu_list);
 
-		if (al.map && al.map->dso && al.map->dso->name)
-			dsoname = al.map->dso->name;
-		else
-			dsoname = "";
+	for (i = 0; i < map->nr; i++) {
+		int cpu = map->map[i];
+
+		if (cpu >= MAX_NR_CPUS) {
+			pr_err("Requested CPU %d too large. "
+			       "Consider raising MAX_NR_CPUS\n", cpu);
+			return -1;
+		}
 
-		printf("%16" PRIx64 " %s (%s)", al.addr, symname, dsoname);
+		set_bit(cpu, cpu_bitmap);
 	}
+
+	return 0;
 }
diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h
index 66d4e1490879..170601e67d6b 100644
--- a/tools/perf/util/session.h
+++ b/tools/perf/util/session.h
@@ -112,6 +112,7 @@ int perf_session__set_kallsyms_ref_reloc_sym(struct map **maps,
 					     u64 addr);
 
 void mem_bswap_64(void *src, int byte_size);
+void perf_event__attr_swap(struct perf_event_attr *attr);
 
 int perf_session__create_kernel_maps(struct perf_session *self);
 
@@ -167,8 +168,12 @@ static inline int perf_session__parse_sample(struct perf_session *session,
 struct perf_evsel *perf_session__find_first_evtype(struct perf_session *session,
 					    unsigned int type);
 
-void perf_session__print_symbols(union perf_event *event,
+void perf_session__print_ip(union perf_event *event,
 				 struct perf_sample *sample,
-				 struct perf_session *session);
+				 struct perf_session *session,
+				 int print_sym, int print_dso);
+
+int perf_session__cpu_bitmap(struct perf_session *session,
+			     const char *cpu_list, unsigned long *cpu_bitmap);
 
 #endif /* __PERF_SESSION_H */
diff --git a/tools/perf/util/sort.c b/tools/perf/util/sort.c
index f44fa541d56e..401e220566fd 100644
--- a/tools/perf/util/sort.c
+++ b/tools/perf/util/sort.c
@@ -15,95 +15,6 @@ char * field_sep;
 
 LIST_HEAD(hist_entry__sort_list);
 
-static int hist_entry__thread_snprintf(struct hist_entry *self, char *bf,
-				       size_t size, unsigned int width);
-static int hist_entry__comm_snprintf(struct hist_entry *self, char *bf,
-				     size_t size, unsigned int width);
-static int hist_entry__dso_snprintf(struct hist_entry *self, char *bf,
-				    size_t size, unsigned int width);
-static int hist_entry__sym_snprintf(struct hist_entry *self, char *bf,
-				    size_t size, unsigned int width);
-static int hist_entry__parent_snprintf(struct hist_entry *self, char *bf,
-				       size_t size, unsigned int width);
-static int hist_entry__cpu_snprintf(struct hist_entry *self, char *bf,
-				    size_t size, unsigned int width);
-
-struct sort_entry sort_thread = {
-	.se_header	= "Command:  Pid",
-	.se_cmp		= sort__thread_cmp,
-	.se_snprintf	= hist_entry__thread_snprintf,
-	.se_width_idx	= HISTC_THREAD,
-};
-
-struct sort_entry sort_comm = {
-	.se_header	= "Command",
-	.se_cmp		= sort__comm_cmp,
-	.se_collapse	= sort__comm_collapse,
-	.se_snprintf	= hist_entry__comm_snprintf,
-	.se_width_idx	= HISTC_COMM,
-};
-
-struct sort_entry sort_dso = {
-	.se_header	= "Shared Object",
-	.se_cmp		= sort__dso_cmp,
-	.se_snprintf	= hist_entry__dso_snprintf,
-	.se_width_idx	= HISTC_DSO,
-};
-
-struct sort_entry sort_sym = {
-	.se_header	= "Symbol",
-	.se_cmp		= sort__sym_cmp,
-	.se_snprintf	= hist_entry__sym_snprintf,
-	.se_width_idx	= HISTC_SYMBOL,
-};
-
-struct sort_entry sort_parent = {
-	.se_header	= "Parent symbol",
-	.se_cmp		= sort__parent_cmp,
-	.se_snprintf	= hist_entry__parent_snprintf,
-	.se_width_idx	= HISTC_PARENT,
-};
- 
-struct sort_entry sort_cpu = {
-	.se_header      = "CPU",
-	.se_cmp	        = sort__cpu_cmp,
-	.se_snprintf    = hist_entry__cpu_snprintf,
-	.se_width_idx	= HISTC_CPU,
-};
-
-struct sort_dimension {
-	const char		*name;
-	struct sort_entry	*entry;
-	int			taken;
-};
-
-static struct sort_dimension sort_dimensions[] = {
-	{ .name = "pid",	.entry = &sort_thread,	},
-	{ .name = "comm",	.entry = &sort_comm,	},
-	{ .name = "dso",	.entry = &sort_dso,	},
-	{ .name = "symbol",	.entry = &sort_sym,	},
-	{ .name = "parent",	.entry = &sort_parent,	},
-	{ .name = "cpu",	.entry = &sort_cpu,	},
-};
-
-int64_t cmp_null(void *l, void *r)
-{
-	if (!l && !r)
-		return 0;
-	else if (!l)
-		return -1;
-	else
-		return 1;
-}
-
-/* --sort pid */
-
-int64_t
-sort__thread_cmp(struct hist_entry *left, struct hist_entry *right)
-{
-	return right->thread->pid - left->thread->pid;
-}
-
 static int repsep_snprintf(char *bf, size_t size, const char *fmt, ...)
 {
 	int n;
@@ -125,6 +36,24 @@ static int repsep_snprintf(char *bf, size_t size, const char *fmt, ...)
 	return n;
 }
 
+static int64_t cmp_null(void *l, void *r)
+{
+	if (!l && !r)
+		return 0;
+	else if (!l)
+		return -1;
+	else
+		return 1;
+}
+
+/* --sort pid */
+
+static int64_t
+sort__thread_cmp(struct hist_entry *left, struct hist_entry *right)
+{
+	return right->thread->pid - left->thread->pid;
+}
+
 static int hist_entry__thread_snprintf(struct hist_entry *self, char *bf,
 				       size_t size, unsigned int width)
 {
@@ -132,15 +61,50 @@ static int hist_entry__thread_snprintf(struct hist_entry *self, char *bf,
 			      self->thread->comm ?: "", self->thread->pid);
 }
 
+struct sort_entry sort_thread = {
+	.se_header	= "Command:  Pid",
+	.se_cmp		= sort__thread_cmp,
+	.se_snprintf	= hist_entry__thread_snprintf,
+	.se_width_idx	= HISTC_THREAD,
+};
+
+/* --sort comm */
+
+static int64_t
+sort__comm_cmp(struct hist_entry *left, struct hist_entry *right)
+{
+	return right->thread->pid - left->thread->pid;
+}
+
+static int64_t
+sort__comm_collapse(struct hist_entry *left, struct hist_entry *right)
+{
+	char *comm_l = left->thread->comm;
+	char *comm_r = right->thread->comm;
+
+	if (!comm_l || !comm_r)
+		return cmp_null(comm_l, comm_r);
+
+	return strcmp(comm_l, comm_r);
+}
+
 static int hist_entry__comm_snprintf(struct hist_entry *self, char *bf,
 				     size_t size, unsigned int width)
 {
 	return repsep_snprintf(bf, size, "%*s", width, self->thread->comm);
 }
 
+struct sort_entry sort_comm = {
+	.se_header	= "Command",
+	.se_cmp		= sort__comm_cmp,
+	.se_collapse	= sort__comm_collapse,
+	.se_snprintf	= hist_entry__comm_snprintf,
+	.se_width_idx	= HISTC_COMM,
+};
+
 /* --sort dso */
 
-int64_t
+static int64_t
 sort__dso_cmp(struct hist_entry *left, struct hist_entry *right)
 {
 	struct dso *dso_l = left->ms.map ? left->ms.map->dso : NULL;
@@ -173,9 +137,16 @@ static int hist_entry__dso_snprintf(struct hist_entry *self, char *bf,
 	return repsep_snprintf(bf, size, "%-*s", width, "[unknown]");
 }
 
+struct sort_entry sort_dso = {
+	.se_header	= "Shared Object",
+	.se_cmp		= sort__dso_cmp,
+	.se_snprintf	= hist_entry__dso_snprintf,
+	.se_width_idx	= HISTC_DSO,
+};
+
 /* --sort symbol */
 
-int64_t
+static int64_t
 sort__sym_cmp(struct hist_entry *left, struct hist_entry *right)
 {
 	u64 ip_l, ip_r;
@@ -211,29 +182,16 @@ static int hist_entry__sym_snprintf(struct hist_entry *self, char *bf,
 	return ret;
 }
 
-/* --sort comm */
-
-int64_t
-sort__comm_cmp(struct hist_entry *left, struct hist_entry *right)
-{
-	return right->thread->pid - left->thread->pid;
-}
-
-int64_t
-sort__comm_collapse(struct hist_entry *left, struct hist_entry *right)
-{
-	char *comm_l = left->thread->comm;
-	char *comm_r = right->thread->comm;
-
-	if (!comm_l || !comm_r)
-		return cmp_null(comm_l, comm_r);
-
-	return strcmp(comm_l, comm_r);
-}
+struct sort_entry sort_sym = {
+	.se_header	= "Symbol",
+	.se_cmp		= sort__sym_cmp,
+	.se_snprintf	= hist_entry__sym_snprintf,
+	.se_width_idx	= HISTC_SYMBOL,
+};
 
 /* --sort parent */
 
-int64_t
+static int64_t
 sort__parent_cmp(struct hist_entry *left, struct hist_entry *right)
 {
 	struct symbol *sym_l = left->parent;
@@ -252,9 +210,16 @@ static int hist_entry__parent_snprintf(struct hist_entry *self, char *bf,
 			      self->parent ? self->parent->name : "[other]");
 }
 
+struct sort_entry sort_parent = {
+	.se_header	= "Parent symbol",
+	.se_cmp		= sort__parent_cmp,
+	.se_snprintf	= hist_entry__parent_snprintf,
+	.se_width_idx	= HISTC_PARENT,
+};
+
 /* --sort cpu */
 
-int64_t
+static int64_t
 sort__cpu_cmp(struct hist_entry *left, struct hist_entry *right)
 {
 	return right->cpu - left->cpu;
@@ -266,6 +231,28 @@ static int hist_entry__cpu_snprintf(struct hist_entry *self, char *bf,
 	return repsep_snprintf(bf, size, "%-*d", width, self->cpu);
 }
 
+struct sort_entry sort_cpu = {
+	.se_header      = "CPU",
+	.se_cmp	        = sort__cpu_cmp,
+	.se_snprintf    = hist_entry__cpu_snprintf,
+	.se_width_idx	= HISTC_CPU,
+};
+
+struct sort_dimension {
+	const char		*name;
+	struct sort_entry	*entry;
+	int			taken;
+};
+
+static struct sort_dimension sort_dimensions[] = {
+	{ .name = "pid",	.entry = &sort_thread,	},
+	{ .name = "comm",	.entry = &sort_comm,	},
+	{ .name = "dso",	.entry = &sort_dso,	},
+	{ .name = "symbol",	.entry = &sort_sym,	},
+	{ .name = "parent",	.entry = &sort_parent,	},
+	{ .name = "cpu",	.entry = &sort_cpu,	},
+};
+
 int sort_dimension__add(const char *tok)
 {
 	unsigned int i;
@@ -273,15 +260,9 @@ int sort_dimension__add(const char *tok)
 	for (i = 0; i < ARRAY_SIZE(sort_dimensions); i++) {
 		struct sort_dimension *sd = &sort_dimensions[i];
 
-		if (sd->taken)
-			continue;
-
 		if (strncasecmp(tok, sd->name, strlen(tok)))
 			continue;
 
-		if (sd->entry->se_collapse)
-			sort__need_collapse = 1;
-
 		if (sd->entry == &sort_parent) {
 			int ret = regcomp(&parent_regex, parent_pattern, REG_EXTENDED);
 			if (ret) {
@@ -294,6 +275,12 @@ int sort_dimension__add(const char *tok)
 			sort__has_parent = 1;
 		}
 
+		if (sd->taken)
+			return 0;
+
+		if (sd->entry->se_collapse)
+			sort__need_collapse = 1;
+
 		if (list_empty(&hist_entry__sort_list)) {
 			if (!strcmp(sd->name, "pid"))
 				sort__first_dimension = SORT_PID;
diff --git a/tools/perf/util/sort.h b/tools/perf/util/sort.h
index 0b91053a7d11..77d0388ad415 100644
--- a/tools/perf/util/sort.h
+++ b/tools/perf/util/sort.h
@@ -103,20 +103,6 @@ extern struct sort_entry sort_thread;
 extern struct list_head hist_entry__sort_list;
 
 void setup_sorting(const char * const usagestr[], const struct option *opts);
-
-extern size_t sort__thread_print(FILE *, struct hist_entry *, unsigned int);
-extern size_t sort__comm_print(FILE *, struct hist_entry *, unsigned int);
-extern size_t sort__dso_print(FILE *, struct hist_entry *, unsigned int);
-extern size_t sort__sym_print(FILE *, struct hist_entry *, unsigned int __used);
-extern int64_t cmp_null(void *, void *);
-extern int64_t sort__thread_cmp(struct hist_entry *, struct hist_entry *);
-extern int64_t sort__comm_cmp(struct hist_entry *, struct hist_entry *);
-extern int64_t sort__comm_collapse(struct hist_entry *, struct hist_entry *);
-extern int64_t sort__dso_cmp(struct hist_entry *, struct hist_entry *);
-extern int64_t sort__sym_cmp(struct hist_entry *, struct hist_entry *);
-extern int64_t sort__parent_cmp(struct hist_entry *, struct hist_entry *);
-int64_t sort__cpu_cmp(struct hist_entry *left, struct hist_entry *right);
-extern size_t sort__parent_print(FILE *, struct hist_entry *, unsigned int);
 extern int sort_dimension__add(const char *);
 void sort_entry__setup_elide(struct sort_entry *self, struct strlist *list,
 			     const char *list_name, FILE *fp);
diff --git a/tools/perf/util/string.c b/tools/perf/util/string.c
index b9a985dadd08..d5836382ff2c 100644
--- a/tools/perf/util/string.c
+++ b/tools/perf/util/string.c
@@ -294,3 +294,22 @@ bool strlazymatch(const char *str, const char *pat)
 {
 	return __match_glob(str, pat, true);
 }
+
+/**
+ * strtailcmp - Compare the tail of two strings
+ * @s1: 1st string to be compared
+ * @s2: 2nd string to be compared
+ *
+ * Return 0 if whole of either string is same as another's tail part.
+ */
+int strtailcmp(const char *s1, const char *s2)
+{
+	int i1 = strlen(s1);
+	int i2 = strlen(s2);
+	while (--i1 >= 0 && --i2 >= 0) {
+		if (s1[i1] != s2[i2])
+			return s1[i1] - s2[i2];
+	}
+	return 0;
+}
+
diff --git a/tools/perf/util/trace-event-info.c b/tools/perf/util/trace-event-info.c
index 35729f4c40cb..3403f814ad72 100644
--- a/tools/perf/util/trace-event-info.c
+++ b/tools/perf/util/trace-event-info.c
@@ -183,106 +183,59 @@ int bigendian(void)
 	return *ptr == 0x01020304;
 }
 
-static unsigned long long copy_file_fd(int fd)
+/* unfortunately, you can not stat debugfs or proc files for size */
+static void record_file(const char *file, size_t hdr_sz)
 {
 	unsigned long long size = 0;
-	char buf[BUFSIZ];
-	int r;
-
-	do {
-		r = read(fd, buf, BUFSIZ);
-		if (r > 0) {
-			size += r;
-			write_or_die(buf, r);
-		}
-	} while (r > 0);
-
-	return size;
-}
-
-static unsigned long long copy_file(const char *file)
-{
-	unsigned long long size = 0;
-	int fd;
+	char buf[BUFSIZ], *sizep;
+	off_t hdr_pos = lseek(output_fd, 0, SEEK_CUR);
+	int r, fd;
 
 	fd = open(file, O_RDONLY);
 	if (fd < 0)
 		die("Can't read '%s'", file);
-	size = copy_file_fd(fd);
-	close(fd);
 
-	return size;
-}
-
-static unsigned long get_size_fd(int fd)
-{
-	unsigned long long size = 0;
-	char buf[BUFSIZ];
-	int r;
+	/* put in zeros for file size, then fill true size later */
+	write_or_die(&size, hdr_sz);
 
 	do {
 		r = read(fd, buf, BUFSIZ);
-		if (r > 0)
+		if (r > 0) {
 			size += r;
+			write_or_die(buf, r);
+		}
 	} while (r > 0);
-
-	lseek(fd, 0, SEEK_SET);
-
-	return size;
-}
-
-static unsigned long get_size(const char *file)
-{
-	unsigned long long size = 0;
-	int fd;
-
-	fd = open(file, O_RDONLY);
-	if (fd < 0)
-		die("Can't read '%s'", file);
-	size = get_size_fd(fd);
 	close(fd);
 
-	return size;
+	/* ugh, handle big-endian hdr_size == 4 */
+	sizep = (char*)&size;
+	if (bigendian())
+		sizep += sizeof(u64) - hdr_sz;
+
+	if (pwrite(output_fd, sizep, hdr_sz, hdr_pos) < 0)
+		die("writing to %s", output_file);
 }
 
 static void read_header_files(void)
 {
-	unsigned long long size, check_size;
 	char *path;
-	int fd;
+	struct stat st;
 
 	path = get_tracing_file("events/header_page");
-	fd = open(path, O_RDONLY);
-	if (fd < 0)
+	if (stat(path, &st) < 0)
 		die("can't read '%s'", path);
 
-	/* unfortunately, you can not stat debugfs files for size */
-	size = get_size_fd(fd);
-
 	write_or_die("header_page", 12);
-	write_or_die(&size, 8);
-	check_size = copy_file_fd(fd);
-	close(fd);
-
-	if (size != check_size)
-		die("wrong size for '%s' size=%lld read=%lld",
-		    path, size, check_size);
+	record_file(path, 8);
 	put_tracing_file(path);
 
 	path = get_tracing_file("events/header_event");
-	fd = open(path, O_RDONLY);
-	if (fd < 0)
+	if (stat(path, &st) < 0)
 		die("can't read '%s'", path);
 
-	size = get_size_fd(fd);
-
 	write_or_die("header_event", 13);
-	write_or_die(&size, 8);
-	check_size = copy_file_fd(fd);
-	if (size != check_size)
-		die("wrong size for '%s'", path);
+	record_file(path, 8);
 	put_tracing_file(path);
-	close(fd);
 }
 
 static bool name_in_tp_list(char *sys, struct tracepoint_path *tps)
@@ -298,7 +251,6 @@ static bool name_in_tp_list(char *sys, struct tracepoint_path *tps)
 
 static void copy_event_system(const char *sys, struct tracepoint_path *tps)
 {
-	unsigned long long size, check_size;
 	struct dirent *dent;
 	struct stat st;
 	char *format;
@@ -338,14 +290,8 @@ static void copy_event_system(const char *sys, struct tracepoint_path *tps)
 		sprintf(format, "%s/%s/format", sys, dent->d_name);
 		ret = stat(format, &st);
 
-		if (ret >= 0) {
-			/* unfortunately, you can not stat debugfs files for size */
-			size = get_size(format);
-			write_or_die(&size, 8);
-			check_size = copy_file(format);
-			if (size != check_size)
-				die("error in size of file '%s'", format);
-		}
+		if (ret >= 0)
+			record_file(format, 8);
 
 		free(format);
 	}
@@ -426,7 +372,7 @@ static void read_event_files(struct tracepoint_path *tps)
 
 static void read_proc_kallsyms(void)
 {
-	unsigned int size, check_size;
+	unsigned int size;
 	const char *path = "/proc/kallsyms";
 	struct stat st;
 	int ret;
@@ -438,17 +384,12 @@ static void read_proc_kallsyms(void)
 		write_or_die(&size, 4);
 		return;
 	}
-	size = get_size(path);
-	write_or_die(&size, 4);
-	check_size = copy_file(path);
-	if (size != check_size)
-		die("error in size of file '%s'", path);
-
+	record_file(path, 4);
 }
 
 static void read_ftrace_printk(void)
 {
-	unsigned int size, check_size;
+	unsigned int size;
 	char *path;
 	struct stat st;
 	int ret;
@@ -461,11 +402,8 @@ static void read_ftrace_printk(void)
 		write_or_die(&size, 4);
 		goto out;
 	}
-	size = get_size(path);
-	write_or_die(&size, 4);
-	check_size = copy_file(path);
-	if (size != check_size)
-		die("error in size of file '%s'", path);
+	record_file(path, 4);
+
 out:
 	put_tracing_file(path);
 }
diff --git a/tools/perf/util/util.h b/tools/perf/util/util.h
index fc784284ac8b..0128906bac88 100644
--- a/tools/perf/util/util.h
+++ b/tools/perf/util/util.h
@@ -238,6 +238,7 @@ char **argv_split(const char *str, int *argcp);
 void argv_free(char **argv);
 bool strglobmatch(const char *str, const char *pat);
 bool strlazymatch(const char *str, const char *pat);
+int strtailcmp(const char *s1, const char *s2);
 unsigned long convert_unit(unsigned long value, char *unit);
 int readn(int fd, void *buf, size_t size);
 
diff --git a/tools/power/cpupower/.gitignore b/tools/power/cpupower/.gitignore
new file mode 100644
index 000000000000..8a83dd2ffc11
--- /dev/null
+++ b/tools/power/cpupower/.gitignore
@@ -0,0 +1,22 @@
+.libs
+libcpupower.so
+libcpupower.so.0
+libcpupower.so.0.0.0
+build/ccdv
+cpufreq-info
+cpufreq-set
+cpufreq-aperf
+lib/.libs
+lib/cpufreq.lo
+lib/cpufreq.o
+lib/proc.lo
+lib/proc.o
+lib/sysfs.lo
+lib/sysfs.o
+po/cpupowerutils.pot
+po/*.gmo
+utils/cpufreq-info.o
+utils/cpufreq-set.o
+utils/cpufreq-aperf.o
+cpupower
+bench/cpufreq-bench
diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile
new file mode 100644
index 000000000000..94c2cf0a98b8
--- /dev/null
+++ b/tools/power/cpupower/Makefile
@@ -0,0 +1,279 @@
+# Makefile for cpupower
+#
+# Copyright (C) 2005,2006 Dominik Brodowski <linux@dominikbrodowski.net>
+#
+# Based largely on the Makefile for udev by:
+#
+# Copyright (C) 2003,2004 Greg Kroah-Hartman <greg@kroah.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+
+# --- CONFIGURATION BEGIN ---
+
+# Set the following to `true' to make a unstripped, unoptimized
+# binary. Leave this set to `false' for production use.
+DEBUG ?=	false
+
+# make the build silent. Set this to something else to make it noisy again.
+V ?=		false
+
+# Internationalization support (output in different languages).
+# Requires gettext.
+NLS ?=		true
+
+# Set the following to 'true' to build/install the
+# cpufreq-bench benchmarking tool
+CPUFRQ_BENCH ?= true
+
+# Prefix to the directories we're installing to
+DESTDIR ?=
+
+# --- CONFIGURATION END ---
+
+
+
+# Package-related definitions. Distributions can modify the version
+# and _should_ modify the PACKAGE_BUGREPORT definition
+
+VERSION=			$(shell ./utils/version-gen.sh)
+LIB_MAJ=			0.0.0
+LIB_MIN=			0
+
+PACKAGE =			cpupower
+PACKAGE_BUGREPORT =		cpufreq@vger.kernel.org
+LANGUAGES = 			de fr it cs pt
+
+
+# Directory definitions. These are default and most probably
+# do not need to be changed. Please note that DESTDIR is
+# added in front of any of them
+
+bindir ?=	/usr/bin
+sbindir ?=	/usr/sbin
+mandir ?=	/usr/man
+includedir ?=	/usr/include
+libdir ?=	/usr/lib
+localedir ?=	/usr/share/locale
+docdir ?=       /usr/share/doc/packages/cpupower
+confdir ?=      /etc/
+
+# Toolchain: what tools do we use, and what options do they need:
+
+CP = cp -fpR
+INSTALL = /usr/bin/install -c
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_DATA  = ${INSTALL} -m 644
+INSTALL_SCRIPT = ${INSTALL_PROGRAM}
+
+# If you are running a cross compiler, you may want to set this
+# to something more interesting, like "arm-linux-".  If you want
+# to compile vs uClibc, that can be done here as well.
+CROSS = #/usr/i386-linux-uclibc/usr/bin/i386-uclibc-
+CC = $(CROSS)gcc
+LD = $(CROSS)gcc
+AR = $(CROSS)ar
+STRIP = $(CROSS)strip
+RANLIB = $(CROSS)ranlib
+HOSTCC = gcc
+
+
+# Now we set up the build system
+#
+
+# set up PWD so that older versions of make will work with our build.
+PWD = $(shell pwd)
+
+GMO_FILES = ${shell for HLANG in ${LANGUAGES}; do echo po/$$HLANG.gmo; done;}
+
+export CROSS CC AR STRIP RANLIB CFLAGS LDFLAGS LIB_OBJS
+
+# check if compiler option is supported
+cc-supports = ${shell if $(CC) ${1} -S -o /dev/null -xc /dev/null > /dev/null 2>&1; then echo "$(1)"; fi;}
+
+# use '-Os' optimization if available, else use -O2
+OPTIMIZATION := $(call cc-supports,-Os,-O2)
+
+WARNINGS := -Wall -Wchar-subscripts -Wpointer-arith -Wsign-compare
+WARNINGS += $(call cc-supports,-Wno-pointer-sign)
+WARNINGS += $(call cc-supports,-Wdeclaration-after-statement)
+WARNINGS += -Wshadow
+
+CFLAGS += -DVERSION=\"$(VERSION)\" -DPACKAGE=\"$(PACKAGE)\" \
+		-DPACKAGE_BUGREPORT=\"$(PACKAGE_BUGREPORT)\" -D_GNU_SOURCE
+
+UTIL_OBJS =  utils/helpers/amd.o utils/helpers/topology.o utils/helpers/msr.o \
+	utils/helpers/sysfs.o utils/helpers/misc.o utils/helpers/cpuid.o \
+	utils/helpers/pci.o utils/helpers/bitmask.o \
+	utils/idle_monitor/nhm_idle.o utils/idle_monitor/snb_idle.o \
+	utils/idle_monitor/amd_fam14h_idle.o utils/idle_monitor/cpuidle_sysfs.o \
+	utils/idle_monitor/mperf_monitor.o utils/idle_monitor/cpupower-monitor.o \
+	utils/cpupower.o utils/cpufreq-info.o utils/cpufreq-set.o \
+	utils/cpupower-set.o utils/cpupower-info.o utils/cpuidle-info.o
+
+UTIL_HEADERS = utils/helpers/helpers.h utils/idle_monitor/cpupower-monitor.h \
+	utils/helpers/bitmask.h \
+	utils/idle_monitor/idle_monitors.h utils/idle_monitor/idle_monitors.def
+
+UTIL_SRC := $(UTIL_OBJS:.o=.c)
+
+LIB_HEADERS = 	lib/cpufreq.h lib/sysfs.h
+LIB_SRC = 	lib/cpufreq.c lib/sysfs.c
+LIB_OBJS = 	lib/cpufreq.o lib/sysfs.o
+
+CFLAGS +=	-pipe
+
+ifeq ($(strip $(NLS)),true)
+	INSTALL_NLS += install-gmo
+	COMPILE_NLS += create-gmo
+endif
+
+ifeq ($(strip $(CPUFRQ_BENCH)),true)
+	INSTALL_BENCH += install-bench
+	COMPILE_BENCH += compile-bench
+endif
+
+CFLAGS += $(WARNINGS)
+
+ifeq ($(strip $(V)),false)
+	QUIET=@
+	ECHO=@echo
+else
+	QUIET=
+	ECHO=@\#
+endif
+export QUIET ECHO
+
+# if DEBUG is enabled, then we do not strip or optimize
+ifeq ($(strip $(DEBUG)),true)
+	CFLAGS += -O1 -g -DDEBUG
+	STRIPCMD = /bin/true -Since_we_are_debugging
+else
+	CFLAGS += $(OPTIMIZATION) -fomit-frame-pointer
+	STRIPCMD = $(STRIP) -s --remove-section=.note --remove-section=.comment
+endif
+
+
+# the actual make rules
+
+all: libcpupower cpupower $(COMPILE_NLS) $(COMPILE_BENCH)
+
+lib/%.o: $(LIB_SRC) $(LIB_HEADERS)
+	$(ECHO) "  CC      " $@
+	$(QUIET) $(CC) $(CFLAGS) -fPIC -o $@ -c lib/$*.c
+
+libcpupower.so.$(LIB_MAJ): $(LIB_OBJS)
+	$(ECHO) "  LD      " $@
+	$(QUIET) $(CC) -shared $(CFLAGS) $(LDFLAGS) -o $@ \
+		-Wl,-soname,libcpupower.so.$(LIB_MIN) $(LIB_OBJS)
+	@ln -sf $@ libcpupower.so
+	@ln -sf $@ libcpupower.so.$(LIB_MIN)
+
+libcpupower: libcpupower.so.$(LIB_MAJ)
+
+# Let all .o files depend on its .c file and all headers
+# Might be worth to put this into utils/Makefile at some point of time
+$(UTIL_OBJS): $(UTIL_HEADERS)
+
+.c.o:
+	$(ECHO) "  CC      " $@
+	$(QUIET) $(CC) $(CFLAGS) -I./lib -I ./utils -o $@ -c $*.c
+
+cpupower: $(UTIL_OBJS) libcpupower.so.$(LIB_MAJ)
+	$(ECHO) "  CC      " $@
+	$(QUIET) $(CC) $(CFLAGS) $(LDFLAGS) -lcpupower -lrt -lpci -L. -o $@ $(UTIL_OBJS)
+	$(QUIET) $(STRIPCMD) $@
+
+po/$(PACKAGE).pot: $(UTIL_SRC)
+	$(ECHO) "  GETTEXT " $@
+	$(QUIET) xgettext --default-domain=$(PACKAGE) --add-comments \
+		--keyword=_ --keyword=N_ $(UTIL_SRC) && \
+	test -f $(PACKAGE).po && \
+	mv -f $(PACKAGE).po po/$(PACKAGE).pot
+
+po/%.gmo: po/%.po
+	$(ECHO) "  MSGFMT  " $@
+	$(QUIET) msgfmt -o $@ po/$*.po
+
+create-gmo: ${GMO_FILES}
+
+update-po: po/$(PACKAGE).pot
+	$(ECHO) "  MSGMRG  " $@
+	$(QUIET) @for HLANG in $(LANGUAGES); do \
+		echo -n "Updating $$HLANG "; \
+		if msgmerge po/$$HLANG.po po/$(PACKAGE).pot -o \
+		   po/$$HLANG.new.po; then \
+			mv -f po/$$HLANG.new.po po/$$HLANG.po; \
+		else \
+			echo "msgmerge for $$HLANG failed!"; \
+			rm -f po/$$HLANG.new.po; \
+		fi; \
+	done;
+
+compile-bench: libcpupower.so.$(LIB_MAJ)
+	@V=$(V) confdir=$(confdir) $(MAKE) -C bench
+
+clean:
+	-find . \( -not -type d \) -and \( -name '*~' -o -name '*.[oas]' \) -type f -print \
+	 | xargs rm -f
+	-rm -f $(UTIL_BINS)
+	-rm -f $(IDLE_OBJS)
+	-rm -f cpupower
+	-rm -f libcpupower.so*
+	-rm -rf po/*.gmo po/*.pot
+	$(MAKE) -C bench clean
+
+
+install-lib:
+	$(INSTALL) -d $(DESTDIR)${libdir}
+	$(CP) libcpupower.so* $(DESTDIR)${libdir}/
+	$(INSTALL) -d $(DESTDIR)${includedir}
+	$(INSTALL_DATA) lib/cpufreq.h $(DESTDIR)${includedir}/cpufreq.h
+
+install-tools:
+	$(INSTALL) -d $(DESTDIR)${bindir}
+	$(INSTALL_PROGRAM) cpupower $(DESTDIR)${bindir}
+
+install-man:
+	$(INSTALL_DATA) -D man/cpupower.1 $(DESTDIR)${mandir}/man1/cpupower.1
+	$(INSTALL_DATA) -D man/cpupower-frequency-set.1 $(DESTDIR)${mandir}/man1/cpupower-frequency-set.1
+	$(INSTALL_DATA) -D man/cpupower-frequency-info.1 $(DESTDIR)${mandir}/man1/cpupower-frequency-info.1
+	$(INSTALL_DATA) -D man/cpupower-set.1 $(DESTDIR)${mandir}/man1/cpupower-set.1
+	$(INSTALL_DATA) -D man/cpupower-info.1 $(DESTDIR)${mandir}/man1/cpupower-info.1
+	$(INSTALL_DATA) -D man/cpupower-monitor.1 $(DESTDIR)${mandir}/man1/cpupower-monitor.1
+
+install-gmo:
+	$(INSTALL) -d $(DESTDIR)${localedir}
+	for HLANG in $(LANGUAGES); do \
+		echo '$(INSTALL_DATA) -D po/$$HLANG.gmo $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo'; \
+		$(INSTALL_DATA) -D po/$$HLANG.gmo $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo; \
+	done;
+
+install-bench:
+	@#DESTDIR must be set from outside to survive
+	@sbindir=$(sbindir) bindir=$(bindir) docdir=$(docdir) confdir=$(confdir) $(MAKE) -C bench install
+
+install: all install-lib install-tools install-man $(INSTALL_NLS) $(INSTALL_BENCH)
+
+uninstall:
+	- rm -f $(DESTDIR)${libdir}/libcpupower.*
+	- rm -f $(DESTDIR)${includedir}/cpufreq.h
+	- rm -f $(DESTDIR)${bindir}/utils/cpupower
+	- rm -f $(DESTDIR)${mandir}/man1/cpufreq-set.1
+	- rm -f $(DESTDIR)${mandir}/man1/cpufreq-info.1
+	- for HLANG in $(LANGUAGES); do \
+		rm -f $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo; \
+	  done;
+
+.PHONY: all utils libcpupower update-po create-gmo install-lib install-tools install-man install-gmo install uninstall clean
diff --git a/tools/power/cpupower/README b/tools/power/cpupower/README
new file mode 100644
index 000000000000..fd9d4c0d6688
--- /dev/null
+++ b/tools/power/cpupower/README
@@ -0,0 +1,49 @@
+The cpufrequtils package (homepage: 
+http://www.kernel.org/pub/linux/utils/kernel/cpufreq/cpufrequtils.html ) 
+consists of the following elements:
+
+requirements
+------------
+
+On x86 pciutils is needed at runtime (-lpci).
+For compilation pciutils-devel (pci/pci.h) and a gcc version
+providing cpuid.h is needed.
+For both it's not explicitly checked for (yet).
+
+
+libcpufreq
+----------
+
+"libcpufreq" is a library which offers a unified access method for userspace
+tools and programs to the cpufreq core and drivers in the Linux kernel. This
+allows for code reduction in userspace tools, a clean implementation of
+the interaction to the cpufreq core, and support for both the sysfs and proc
+interfaces [depending on configuration, see below].
+
+
+compilation and installation
+----------------------------
+
+make
+su
+make install
+
+should suffice on most systems. It builds default libcpufreq,
+cpufreq-set and cpufreq-info files and installs them in /usr/lib and
+/usr/bin, respectively. If you want to set up the paths differently and/or
+want to configure the package to your specific needs, you need to open
+"Makefile" with an editor of your choice and edit the block marked
+CONFIGURATION.
+
+
+THANKS
+------
+Many thanks to Mattia Dongili who wrote the autotoolization and
+libtoolization, the manpages and the italian language file for cpufrequtils;
+to Dave Jones for his feedback and his dump_psb tool; to Bruno Ducrot for his
+powernow-k8-decode and intel_gsic tools as well as the french language file;
+and to various others commenting on the previous (pre-)releases of 
+cpufrequtils.
+
+
+        Dominik Brodowski
diff --git a/tools/power/cpupower/ToDo b/tools/power/cpupower/ToDo
new file mode 100644
index 000000000000..874b78b586ee
--- /dev/null
+++ b/tools/power/cpupower/ToDo
@@ -0,0 +1,11 @@
+ToDos sorted by priority:
+
+- Use bitmask functions to parse CPU topology more robust
+  (current implementation has issues on AMD)
+- Try to read out boost states and frequencies on Intel
+- Adjust README
+- Somewhere saw the ability to read power consumption of
+  RAM from HW on Intel SandyBridge -> another monitor?
+- Add another c1e debug idle monitor
+  -> Is by design racy with BIOS, but could be added
+     with a --force option and some "be careful" messages
diff --git a/tools/power/cpupower/bench/Makefile b/tools/power/cpupower/bench/Makefile
new file mode 100644
index 000000000000..2b67606fc3e3
--- /dev/null
+++ b/tools/power/cpupower/bench/Makefile
@@ -0,0 +1,29 @@
+LIBS = -L../ -lm -lcpupower
+
+OBJS = main.o parse.o system.o benchmark.o
+CFLAGS += -D_GNU_SOURCE -I../lib -DDEFAULT_CONFIG_FILE=\"$(confdir)/cpufreq-bench.conf\"
+
+%.o : %.c
+	$(ECHO) "  CC      " $@
+	$(QUIET) $(CC) -c $(CFLAGS) $< -o $@
+
+cpufreq-bench: $(OBJS)
+	$(ECHO) "  CC      " $@
+	$(QUIET) $(CC) -o $@ $(CFLAGS) $(OBJS) $(LIBS)
+
+all: cpufreq-bench
+
+install:
+	mkdir -p $(DESTDIR)/$(sbindir)
+	mkdir -p $(DESTDIR)/$(bindir)
+	mkdir -p $(DESTDIR)/$(docdir)
+	mkdir -p $(DESTDIR)/$(confdir)
+	install -m 755 cpufreq-bench $(DESTDIR)/$(sbindir)/cpufreq-bench
+	install -m 755 cpufreq-bench_plot.sh $(DESTDIR)/$(bindir)/cpufreq-bench_plot.sh
+	install -m 644 README-BENCH $(DESTDIR)/$(docdir)/README-BENCH
+	install -m 755 cpufreq-bench_script.sh $(DESTDIR)/$(docdir)/cpufreq-bench_script.sh
+	install -m 644 example.cfg $(DESTDIR)/$(confdir)/cpufreq-bench.conf
+
+clean:
+	rm -f *.o
+	rm -f cpufreq-bench
diff --git a/tools/power/cpupower/bench/README-BENCH b/tools/power/cpupower/bench/README-BENCH
new file mode 100644
index 000000000000..8093ec738170
--- /dev/null
+++ b/tools/power/cpupower/bench/README-BENCH
@@ -0,0 +1,124 @@
+This is cpufreq-bench, a microbenchmark for the cpufreq framework.
+
+Purpose
+=======
+
+What is this benchmark for:
+  - Identify worst case performance loss when doing dynamic frequency
+    scaling using Linux kernel governors
+  - Identify average reaction time of a governor to CPU load changes
+  - (Stress) Testing whether a cpufreq low level driver or governor works
+    as expected
+  - Identify cpufreq related performance regressions between kernels
+  - Possibly Real time priority testing? -> what happens if there are
+    processes with a higher prio than the governor's kernel thread
+  - ...
+
+What this benchmark does *not* cover:
+  - Power saving related regressions (In fact as better the performance
+    throughput is, the worse the power savings will be, but the first should
+    mostly count more...)
+  - Real world (workloads)
+
+
+Description
+===========
+
+cpufreq-bench helps to test the condition of a given cpufreq governor.
+For that purpose, it compares the performance governor to a configured
+powersave module.
+
+
+How it works
+============
+You can specify load (100% CPU load) and sleep (0% CPU load) times in us which
+will be run X time in a row (cycles):
+
+         sleep=25000
+         load=25000
+         cycles=20
+
+This part of the configuration file will create 25ms load/sleep turns,
+repeated 20 times.
+
+Adding this:
+         sleep_step=25000
+         load_step=25000
+         rounds=5
+Will increase load and sleep time by 25ms 5 times.
+Together you get following test:
+25ms  load/sleep time repeated 20 times (cycles).
+50ms  load/sleep time repeated 20 times (cycles).
+..
+100ms load/sleep time repeated 20 times (cycles).
+
+First it is calibrated how long a specific CPU intensive calculation
+takes on this machine and needs to be run in a loop using the performance
+governor.
+Then the above test runs are processed using the performance governor
+and the governor to test. The time the calculation really needed
+with the dynamic freq scaling governor is compared with the time needed
+on full performance and you get the overall performance loss.
+
+
+Example of expected results with ondemand governor:
+
+This shows expected results of the first two test run rounds from
+above config, you there have:
+
+100% CPU load (load) | 0 % CPU load (sleep)  | round
+   25 ms             |    25 ms              |   1
+   50 ms             |    50 ms              |   2
+
+For example if ondemand governor is configured to have a 50ms
+sampling rate you get:
+
+In round 1, ondemand should have rather static 50% load and probably
+won't ever switch up (as long as up_threshold is above).
+
+In round 2, if the ondemand sampling times exactly match the load/sleep
+trigger of the cpufreq-bench, you will see no performance loss (compare with
+below possible ondemand sample kick ins (1)):
+
+But if ondemand always kicks in in the middle of the load sleep cycles, it
+will always see 50% loads and you get worst performance impact never
+switching up (compare with below possible ondemand sample kick ins (2))::
+
+      50     50   50   50ms ->time
+load -----|     |-----|     |-----|     |-----|
+          |     |     |     |     |     |     |
+sleep     |-----|     |-----|     |-----|     |----
+    |-----|-----|-----|-----|-----|-----|-----|----  ondemand sampling (1)
+         100    0    100    0    100    0    100     load seen by ondemand(%)
+       |-----|-----|-----|-----|-----|-----|-----|--   ondemand sampling (2)
+      50     50    50    50    50    50    50        load seen by ondemand(%)
+
+You can easily test all kind of load/sleep times and check whether your
+governor in average behaves as expected.
+
+
+ToDo
+====
+
+Provide a gnuplot utility script for easy generation of plots to present
+the outcome nicely.
+
+
+cpufreq-bench Command Usage
+===========================
+-l, --load=<long int>           initial load time in us
+-s, --sleep=<long int>          initial sleep time in us
+-x, --load-step=<long int>      time to be added to load time, in us
+-y, --sleep-step=<long int>     time to be added to sleep time, in us
+-c, --cpu=<unsigned int>        CPU Number to use, starting at 0
+-p, --prio=<priority>           scheduler priority, HIGH, LOW or DEFAULT
+-g, --governor=<governor>       cpufreq governor to test
+-n, --cycles=<int>              load/sleep cycles to get an avarage value to compare
+-r, --rounds<int>               load/sleep rounds
+-f, --file=<configfile>         config file to use
+-o, --output=<dir>              output dir, must exist
+-v, --verbose                   verbose output on/off
+
+Due to the high priority, the application may not be responsible for some time.
+After the benchmark, the logfile is saved in OUTPUTDIR/benchmark_TIMESTAMP.log
+
diff --git a/tools/power/cpupower/bench/benchmark.c b/tools/power/cpupower/bench/benchmark.c
new file mode 100644
index 000000000000..81b1c48607d9
--- /dev/null
+++ b/tools/power/cpupower/bench/benchmark.c
@@ -0,0 +1,194 @@
+/*  cpufreq-bench CPUFreq microbenchmark
+ *
+ *  Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <stdio.h>
+#include <unistd.h>
+#include <math.h>
+
+#include "config.h"
+#include "system.h"
+#include "benchmark.h"
+
+/* Print out progress if we log into a file */
+#define show_progress(total_time, progress_time)	\
+if (config->output != stdout) {				\
+	fprintf(stdout, "Progress: %02lu %%\r",		\
+		(progress_time * 100) / total_time);	\
+	fflush(stdout);					\
+}
+
+/**
+ * compute how many rounds of calculation we should do
+ * to get the given load time
+ *
+ * @param load aimed load time in µs
+ *
+ * @retval rounds of calculation
+ **/
+
+unsigned int calculate_timespace(long load, struct config *config)
+{
+	int i;
+	long long now, then;
+	unsigned int estimated = GAUGECOUNT;
+	unsigned int rounds = 0;
+	unsigned int timed = 0;
+
+	if (config->verbose)
+		printf("calibrating load of %lius, please wait...\n", load);
+
+	/* get the initial calculation time for a specific number of rounds */
+	now = get_time();
+	ROUNDS(estimated);
+	then = get_time();
+
+	timed = (unsigned int)(then - now);
+
+	/* approximation of the wanted load time by comparing with the
+	 * initial calculation time */
+	for (i = 0; i < 4; i++) {
+		rounds = (unsigned int)(load * estimated / timed);
+		dprintf("calibrating with %u rounds\n", rounds);
+		now = get_time();
+		ROUNDS(rounds);
+		then = get_time();
+
+		timed = (unsigned int)(then - now);
+		estimated = rounds;
+	}
+	if (config->verbose)
+		printf("calibration done\n");
+
+	return estimated;
+}
+
+/**
+ * benchmark
+ * generates a specific sleep an load time with the performance
+ * governor and compares the used time for same calculations done
+ * with the configured powersave governor
+ *
+ * @param config config values for the benchmark
+ *
+ **/
+
+void start_benchmark(struct config *config)
+{
+	unsigned int _round, cycle;
+	long long now, then;
+	long sleep_time = 0, load_time = 0;
+	long performance_time = 0, powersave_time = 0;
+	unsigned int calculations;
+	unsigned long total_time = 0, progress_time = 0;
+
+	sleep_time = config->sleep;
+	load_time = config->load;
+
+	/* For the progress bar */
+	for (_round = 1; _round <= config->rounds; _round++)
+		total_time += _round * (config->sleep + config->load);
+	total_time *= 2; /* powersave and performance cycles */
+
+	for (_round = 0; _round < config->rounds; _round++) {
+		performance_time = 0LL;
+		powersave_time = 0LL;
+
+		show_progress(total_time, progress_time);
+
+		/* set the cpufreq governor to "performance" which disables
+		 * P-State switching. */
+		if (set_cpufreq_governor("performance", config->cpu) != 0)
+			return;
+
+		/* calibrate the calculation time. the resulting calculation
+		 * _rounds should produce a load which matches the configured
+		 * load time */
+		calculations = calculate_timespace(load_time, config);
+
+		if (config->verbose)
+			printf("_round %i: doing %u cycles with %u calculations"
+			       " for %lius\n", _round + 1, config->cycles,
+			       calculations, load_time);
+
+		fprintf(config->output, "%u %li %li ",
+			_round, load_time, sleep_time);
+
+		if (config->verbose)
+			printf("avarage: %lius, rps:%li\n",
+				load_time / calculations,
+				1000000 * calculations / load_time);
+
+		/* do some sleep/load cycles with the performance governor */
+		for (cycle = 0; cycle < config->cycles; cycle++) {
+			now = get_time();
+			usleep(sleep_time);
+			ROUNDS(calculations);
+			then = get_time();
+			performance_time += then - now - sleep_time;
+			if (config->verbose)
+				printf("performance cycle took %lius, "
+					"sleep: %lius, "
+					"load: %lius, rounds: %u\n",
+					(long)(then - now), sleep_time,
+					load_time, calculations);
+		}
+		fprintf(config->output, "%li ",
+			performance_time / config->cycles);
+
+		progress_time += sleep_time + load_time;
+		show_progress(total_time, progress_time);
+
+		/* set the powersave governor which activates P-State switching
+		 * again */
+		if (set_cpufreq_governor(config->governor, config->cpu) != 0)
+			return;
+
+		/* again, do some sleep/load cycles with the
+		 * powersave governor */
+		for (cycle = 0; cycle < config->cycles; cycle++) {
+			now = get_time();
+			usleep(sleep_time);
+			ROUNDS(calculations);
+			then = get_time();
+			powersave_time += then - now - sleep_time;
+			if (config->verbose)
+				printf("powersave cycle took %lius, "
+					"sleep: %lius, "
+					"load: %lius, rounds: %u\n",
+					(long)(then - now), sleep_time,
+					load_time, calculations);
+		}
+
+		progress_time += sleep_time + load_time;
+
+		/* compare the avarage sleep/load cycles  */
+		fprintf(config->output, "%li ",
+			powersave_time / config->cycles);
+		fprintf(config->output, "%.3f\n",
+			performance_time * 100.0 / powersave_time);
+		fflush(config->output);
+
+		if (config->verbose)
+			printf("performance is at %.2f%%\n",
+				performance_time * 100.0 / powersave_time);
+
+		sleep_time += config->sleep_step;
+		load_time += config->load_step;
+	}
+}
diff --git a/tools/power/cpupower/bench/benchmark.h b/tools/power/cpupower/bench/benchmark.h
new file mode 100644
index 000000000000..51d7f50ac2bb
--- /dev/null
+++ b/tools/power/cpupower/bench/benchmark.h
@@ -0,0 +1,29 @@
+/*  cpufreq-bench CPUFreq microbenchmark
+ *
+ *  Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/* load loop, this schould take about 1 to 2ms to complete */
+#define ROUNDS(x) {unsigned int rcnt;			       \
+		for (rcnt = 0; rcnt < x*1000; rcnt++) { \
+			(void)(((int)(pow(rcnt, rcnt) * \
+				      sqrt(rcnt*7230970)) ^ 7230716) ^ \
+				      (int)atan2(rcnt, rcnt));	       \
+		} }							\
+
+
+void start_benchmark(struct config *config);
diff --git a/tools/power/cpupower/bench/config.h b/tools/power/cpupower/bench/config.h
new file mode 100644
index 000000000000..ee6f258e5336
--- /dev/null
+++ b/tools/power/cpupower/bench/config.h
@@ -0,0 +1,36 @@
+/*  cpufreq-bench CPUFreq microbenchmark
+ *
+ *  Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/* initial loop count for the load calibration */
+#define GAUGECOUNT	1500
+
+/* default scheduling policy SCHED_OTHER */
+#define SCHEDULER	SCHED_OTHER
+
+#define PRIORITY_DEFAULT 0
+#define PRIORITY_HIGH	 sched_get_priority_max(SCHEDULER)
+#define PRIORITY_LOW	 sched_get_priority_min(SCHEDULER)
+
+/* enable further debug messages */
+#ifdef DEBUG
+#define dprintf printf
+#else
+#define dprintf(...) do { } while (0)
+#endif
+
diff --git a/tools/power/cpupower/bench/cpufreq-bench_plot.sh b/tools/power/cpupower/bench/cpufreq-bench_plot.sh
new file mode 100644
index 000000000000..410021a12f40
--- /dev/null
+++ b/tools/power/cpupower/bench/cpufreq-bench_plot.sh
@@ -0,0 +1,104 @@
+#!/bin/bash
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# Author/Copyright(c): 2009, Thomas Renninger <trenn@suse.de>, Novell Inc.
+
+# Helper script to easily create nice plots of your cpufreq-bench results
+
+dir=`mktemp -d`
+output_file="cpufreq-bench.png"
+global_title="cpufreq-bench plot"
+picture_type="jpeg"
+file[0]=""
+
+function usage()
+{
+    echo "cpufreq-bench_plot.sh [OPTIONS] logfile [measure_title] [logfile [measure_title]] ...]"
+    echo
+    echo "Options"
+    echo "   -o output_file"
+    echo "   -t global_title"
+    echo "   -p picture_type [jpeg|gif|png|postscript|...]"
+    exit 1
+}
+
+if [ $# -eq 0 ];then
+	echo "No benchmark results file provided"
+	echo
+	usage
+fi
+
+while getopts o:t:p: name ; do
+    case $name in
+	o)
+	    output_file="$OPTARG".$picture_type
+	    ;;
+	t)
+	    global_title="$OPTARG"
+	    ;;
+	p)
+	    picture_type="$OPTARG"
+	    ;;
+        ?)
+	    usage
+	    ;;
+    esac
+done
+shift $(($OPTIND -1))
+
+plots=0
+while [ "$1" ];do
+    if [ ! -f "$1" ];then
+	echo "File $1 does not exist"
+	usage
+    fi
+    file[$plots]="$1"
+    title[$plots]="$2"
+    # echo "File: ${file[$plots]} - ${title[plots]}"
+    shift;shift
+    plots=$((plots + 1))
+done
+
+echo "set terminal $picture_type"	>> $dir/plot_script.gpl
+echo "set output \"$output_file\""	>> $dir/plot_script.gpl
+echo "set title \"$global_title\""	>> $dir/plot_script.gpl
+echo "set xlabel \"sleep/load time\""	>> $dir/plot_script.gpl
+echo "set ylabel \"Performance (%)\""	>> $dir/plot_script.gpl
+
+for((plot=0;plot<$plots;plot++));do
+
+    # Sanity check
+    ###### I am to dump to get this redirected to stderr/stdout in one awk call... #####
+    cat ${file[$plot]} |grep -v "^#" |awk '{if ($2 != $3) printf("Error in measure %d:Load time %s does not equal sleep time %s, plot will not be correct\n", $1, $2, $3); ERR=1}'
+    ###### I am to dump to get this redirected in one awk call... #####
+
+    # Parse out load time (which must be equal to sleep time for a plot), divide it by 1000
+    # to get ms and parse out the performance in percentage and write it to a temp file for plotting
+    cat ${file[$plot]} |grep -v "^#" |awk '{printf "%lu %.1f\n",$2/1000, $6}' >$dir/data_$plot
+
+    if [ $plot -eq 0 ];then
+	echo -n "plot " >> $dir/plot_script.gpl
+    fi
+    echo -n "\"$dir/data_$plot\" title \"${title[$plot]}\" with lines" >> $dir/plot_script.gpl
+    if [ $(($plot + 1)) -ne $plots ];then
+	echo -n ", " >> $dir/plot_script.gpl
+    fi
+done
+echo >> $dir/plot_script.gpl
+
+gnuplot $dir/plot_script.gpl
+rm -r $dir
\ No newline at end of file
diff --git a/tools/power/cpupower/bench/cpufreq-bench_script.sh b/tools/power/cpupower/bench/cpufreq-bench_script.sh
new file mode 100644
index 000000000000..de20d2a06879
--- /dev/null
+++ b/tools/power/cpupower/bench/cpufreq-bench_script.sh
@@ -0,0 +1,101 @@
+#!/bin/bash
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# Author/Copyright(c): 2009, Thomas Renninger <trenn@suse.de>, Novell Inc.
+
+# Ondemand up_threshold and sampling rate test script for cpufreq-bench
+# mircobenchmark.
+# Modify the general variables at the top or extend or copy out parts
+# if you want to test other things
+#
+
+# Default with latest kernels is 95, before micro account patches
+# it was 80, cmp. with git commit 808009131046b62ac434dbc796
+UP_THRESHOLD="60 80 95"
+# Depending on the kernel and the HW sampling rate could be restricted
+# and cannot be set that low...
+# E.g. before git commit cef9615a853ebc4972084f7 one could only set
+# min sampling rate of 80000 if CONFIG_HZ=250
+SAMPLING_RATE="20000 80000"
+
+function measure()
+{
+    local -i up_threshold_set
+    local -i sampling_rate_set
+
+    for up_threshold in $UP_THRESHOLD;do
+	for sampling_rate in $SAMPLING_RATE;do
+	    # Set values in sysfs
+	    echo $up_threshold >/sys/devices/system/cpu/cpu0/cpufreq/ondemand/up_threshold
+	    echo $sampling_rate >/sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate
+	    up_threshold_set=$(cat /sys/devices/system/cpu/cpu0/cpufreq/ondemand/up_threshold)
+	    sampling_rate_set=$(cat /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate)
+
+	    # Verify set values in sysfs
+	    if [ ${up_threshold_set} -eq ${up_threshold} ];then
+		echo "up_threshold: $up_threshold, set in sysfs: ${up_threshold_set}"
+	    else
+		echo "WARNING: Tried to set up_threshold: $up_threshold, set in sysfs: ${up_threshold_set}"
+	    fi
+	    if [ ${sampling_rate_set} -eq ${sampling_rate} ];then
+		echo "sampling_rate: $sampling_rate, set in sysfs: ${sampling_rate_set}"
+	    else
+		echo "WARNING: Tried to set sampling_rate: $sampling_rate, set in sysfs: ${sampling_rate_set}"
+	    fi
+
+	    # Benchmark
+	    cpufreq-bench -o /var/log/cpufreq-bench/up_threshold_${up_threshold}_sampling_rate_${sampling_rate}
+	done
+    done
+}
+
+function create_plots()
+{
+    local command
+
+    for up_threshold in $UP_THRESHOLD;do
+	command="cpufreq-bench_plot.sh -o \"sampling_rate_${SAMPLING_RATE}_up_threshold_${up_threshold}\" -t \"Ondemand sampling_rate: ${SAMPLING_RATE} comparison - Up_threshold: $up_threshold %\""
+	for sampling_rate in $SAMPLING_RATE;do
+	    command="${command} /var/log/cpufreq-bench/up_threshold_${up_threshold}_sampling_rate_${sampling_rate}/* \"sampling_rate = $sampling_rate\""
+	done
+	echo $command
+	eval "$command"
+	echo
+    done
+
+    for sampling_rate in $SAMPLING_RATE;do
+	command="cpufreq-bench_plot.sh -o \"up_threshold_${UP_THRESHOLD}_sampling_rate_${sampling_rate}\" -t \"Ondemand up_threshold: ${UP_THRESHOLD} % comparison - sampling_rate: $sampling_rate\""
+	for up_threshold in $UP_THRESHOLD;do
+	    command="${command} /var/log/cpufreq-bench/up_threshold_${up_threshold}_sampling_rate_${sampling_rate}/* \"up_threshold = $up_threshold\""
+	done
+	echo $command
+	eval "$command"
+	echo
+    done
+
+    command="cpufreq-bench_plot.sh -o \"up_threshold_${UP_THRESHOLD}_sampling_rate_${SAMPLING_RATE}\" -t \"Ondemand up_threshold: ${UP_THRESHOLD} and sampling_rate ${SAMPLING_RATE} comparison\""
+    for sampling_rate in $SAMPLING_RATE;do
+	for up_threshold in $UP_THRESHOLD;do
+	    command="${command} /var/log/cpufreq-bench/up_threshold_${up_threshold}_sampling_rate_${sampling_rate}/* \"up_threshold = $up_threshold - sampling_rate = $sampling_rate\""
+	done
+    done
+    echo "$command"
+    eval "$command"
+}
+
+measure
+create_plots
\ No newline at end of file
diff --git a/tools/power/cpupower/bench/example.cfg b/tools/power/cpupower/bench/example.cfg
new file mode 100644
index 000000000000..f91f64360688
--- /dev/null
+++ b/tools/power/cpupower/bench/example.cfg
@@ -0,0 +1,11 @@
+sleep = 50000
+load = 50000
+cpu = 0
+priority = LOW
+output = /var/log/cpufreq-bench
+sleep_step = 50000
+load_step = 50000
+cycles = 20
+rounds = 40
+verbose = 0
+governor = ondemand
diff --git a/tools/power/cpupower/bench/main.c b/tools/power/cpupower/bench/main.c
new file mode 100644
index 000000000000..24910313a521
--- /dev/null
+++ b/tools/power/cpupower/bench/main.c
@@ -0,0 +1,202 @@
+/*  cpufreq-bench CPUFreq microbenchmark
+ *
+ *  Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <getopt.h>
+#include <errno.h>
+
+#include "config.h"
+#include "system.h"
+#include "benchmark.h"
+
+static struct option long_options[] = {
+	{"output",	1,	0,	'o'},
+	{"sleep",	1,	0,	's'},
+	{"load",	1,	0,	'l'},
+	{"verbose",	0,	0,	'v'},
+	{"cpu",		1,	0,	'c'},
+	{"governor",	1,	0,	'g'},
+	{"prio",	1,	0,	'p'},
+	{"file",	1,	0,	'f'},
+	{"cycles",	1,	0,	'n'},
+	{"rounds",	1,	0,	'r'},
+	{"load-step",	1,	0,	'x'},
+	{"sleep-step",	1,	0,	'y'},
+	{"help",	0,	0,	'h'},
+	{0, 0, 0, 0}
+};
+
+/*******************************************************************
+ usage
+*******************************************************************/
+
+void usage()
+{
+	printf("usage: ./bench\n");
+	printf("Options:\n");
+	printf(" -l, --load=<long int>\t\tinitial load time in us\n");
+	printf(" -s, --sleep=<long int>\t\tinitial sleep time in us\n");
+	printf(" -x, --load-step=<long int>\ttime to be added to load time, in us\n");
+	printf(" -y, --sleep-step=<long int>\ttime to be added to sleep time, in us\n");
+	printf(" -c, --cpu=<cpu #>\t\t\tCPU Nr. to use, starting at 0\n");
+	printf(" -p, --prio=<priority>\t\t\tscheduler priority, HIGH, LOW or DEFAULT\n");
+	printf(" -g, --governor=<governor>\t\tcpufreq governor to test\n");
+	printf(" -n, --cycles=<int>\t\t\tload/sleep cycles\n");
+	printf(" -r, --rounds<int>\t\t\tload/sleep rounds\n");
+	printf(" -f, --file=<configfile>\t\tconfig file to use\n");
+	printf(" -o, --output=<dir>\t\t\toutput path. Filename will be OUTPUTPATH/benchmark_TIMESTAMP.log\n");
+	printf(" -v, --verbose\t\t\t\tverbose output on/off\n");
+	printf(" -h, --help\t\t\t\tPrint this help screen\n");
+	exit(1);
+}
+
+/*******************************************************************
+ main
+*******************************************************************/
+
+int main(int argc, char **argv)
+{
+	int c;
+	int option_index = 0;
+	struct config *config = NULL;
+
+	config = prepare_default_config();
+
+	if (config == NULL)
+		return EXIT_FAILURE;
+
+	while (1) {
+		c = getopt_long (argc, argv, "hg:o:s:l:vc:p:f:n:r:x:y:",
+				long_options, &option_index);
+		if (c == -1)
+			break;
+
+		switch (c) {
+		case 'o':
+			if (config->output != NULL)
+				fclose(config->output);
+
+			config->output = prepare_output(optarg);
+
+			if (config->output == NULL)
+				return EXIT_FAILURE;
+
+			dprintf("user output path -> %s\n", optarg);
+			break;
+		case 's':
+			sscanf(optarg, "%li", &config->sleep);
+			dprintf("user sleep time -> %s\n", optarg);
+			break;
+		case 'l':
+			sscanf(optarg, "%li", &config->load);
+			dprintf("user load time -> %s\n", optarg);
+			break;
+		case 'c':
+			sscanf(optarg, "%u", &config->cpu);
+			dprintf("user cpu -> %s\n", optarg);
+			break;
+		case 'g':
+			strncpy(config->governor, optarg, 14);
+			dprintf("user governor -> %s\n", optarg);
+			break;
+		case 'p':
+			if (string_to_prio(optarg) != SCHED_ERR) {
+				config->prio = string_to_prio(optarg);
+				dprintf("user prio -> %s\n", optarg);
+			} else {
+				if (config != NULL) {
+					if (config->output != NULL)
+						fclose(config->output);
+					free(config);
+				}
+				usage();
+			}
+			break;
+		case 'n':
+			sscanf(optarg, "%u", &config->cycles);
+			dprintf("user cycles -> %s\n", optarg);
+			break;
+		case 'r':
+			sscanf(optarg, "%u", &config->rounds);
+			dprintf("user rounds -> %s\n", optarg);
+			break;
+		case 'x':
+			sscanf(optarg, "%li", &config->load_step);
+			dprintf("user load_step -> %s\n", optarg);
+			break;
+		case 'y':
+			sscanf(optarg, "%li", &config->sleep_step);
+			dprintf("user sleep_step -> %s\n", optarg);
+			break;
+		case 'f':
+			if (prepare_config(optarg, config))
+				return EXIT_FAILURE;
+			break;
+		case 'v':
+			config->verbose = 1;
+			dprintf("verbose output enabled\n");
+			break;
+		case 'h':
+		case '?':
+		default:
+			if (config != NULL) {
+				if (config->output != NULL)
+					fclose(config->output);
+				free(config);
+			}
+			usage();
+		}
+	}
+
+	if (config->verbose) {
+		printf("starting benchmark with parameters:\n");
+		printf("config:\n\t"
+		       "sleep=%li\n\t"
+		       "load=%li\n\t"
+		       "sleep_step=%li\n\t"
+		       "load_step=%li\n\t"
+		       "cpu=%u\n\t"
+		       "cycles=%u\n\t"
+		       "rounds=%u\n\t"
+		       "governor=%s\n\n",
+		       config->sleep,
+		       config->load,
+		       config->sleep_step,
+		       config->load_step,
+		       config->cpu,
+		       config->cycles,
+		       config->rounds,
+		       config->governor);
+	}
+
+	prepare_user(config);
+	prepare_system(config);
+	start_benchmark(config);
+
+	if (config->output != stdout)
+		fclose(config->output);
+
+	free(config);
+
+	return EXIT_SUCCESS;
+}
+
diff --git a/tools/power/cpupower/bench/parse.c b/tools/power/cpupower/bench/parse.c
new file mode 100644
index 000000000000..543bba14ae2c
--- /dev/null
+++ b/tools/power/cpupower/bench/parse.c
@@ -0,0 +1,225 @@
+/*  cpufreq-bench CPUFreq microbenchmark
+ *
+ *  Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <time.h>
+#include <dirent.h>
+
+#include <sys/utsname.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+
+#include "parse.h"
+#include "config.h"
+
+/**
+ * converts priority string to priority
+ *
+ * @param str string that represents a scheduler priority
+ *
+ * @retval priority
+ * @retval SCHED_ERR when the priority doesn't exit
+ **/
+
+enum sched_prio string_to_prio(const char *str)
+{
+	if (strncasecmp("high", str, strlen(str)) == 0)
+		return  SCHED_HIGH;
+	else if (strncasecmp("default", str, strlen(str)) == 0)
+		return SCHED_DEFAULT;
+	else if (strncasecmp("low", str, strlen(str)) == 0)
+		return SCHED_LOW;
+	else
+		return SCHED_ERR;
+}
+
+/**
+ * create and open logfile
+ *
+ * @param dir directory in which the logfile should be created
+ *
+ * @retval logfile on success
+ * @retval NULL when the file can't be created
+ **/
+
+FILE *prepare_output(const char *dirname)
+{
+	FILE *output = NULL;
+	int len;
+	char *filename;
+	struct utsname sysdata;
+	DIR *dir;
+
+	dir = opendir(dirname);
+	if (dir == NULL) {
+		if (mkdir(dirname, 0755)) {
+			perror("mkdir");
+			fprintf(stderr, "error: Cannot create dir %s\n",
+				dirname);
+			return NULL;
+		}
+	}
+
+	len = strlen(dirname) + 30;
+	filename = malloc(sizeof(char) * len);
+
+	if (uname(&sysdata) == 0) {
+		len += strlen(sysdata.nodename) + strlen(sysdata.release);
+		filename = realloc(filename, sizeof(char) * len);
+
+		if (filename == NULL) {
+			perror("realloc");
+			return NULL;
+		}
+
+		snprintf(filename, len - 1, "%s/benchmark_%s_%s_%li.log",
+			dirname, sysdata.nodename, sysdata.release, time(NULL));
+	} else {
+		snprintf(filename, len - 1, "%s/benchmark_%li.log",
+			dirname, time(NULL));
+	}
+
+	dprintf("logilename: %s\n", filename);
+
+	output = fopen(filename, "w+");
+	if (output == NULL) {
+		perror("fopen");
+		fprintf(stderr, "error: unable to open logfile\n");
+	}
+
+	fprintf(stdout, "Logfile: %s\n", filename);
+
+	free(filename);
+	fprintf(output, "#round load sleep performance powersave percentage\n");
+	return output;
+}
+
+/**
+ * returns the default config
+ *
+ * @retval default config on success
+ * @retval NULL when the output file can't be created
+ **/
+
+struct config *prepare_default_config()
+{
+	struct config *config = malloc(sizeof(struct config));
+
+	dprintf("loading defaults\n");
+
+	config->sleep = 500000;
+	config->load = 500000;
+	config->sleep_step = 500000;
+	config->load_step = 500000;
+	config->cycles = 5;
+	config->rounds = 50;
+	config->cpu = 0;
+	config->prio = SCHED_HIGH;
+	config->verbose = 0;
+	strncpy(config->governor, "ondemand", 8);
+
+	config->output = stdout;
+
+#ifdef DEFAULT_CONFIG_FILE
+	if (prepare_config(DEFAULT_CONFIG_FILE, config))
+		return NULL;
+#endif
+	return config;
+}
+
+/**
+ * parses config file and returns the config to the caller
+ *
+ * @param path config file name
+ *
+ * @retval 1 on error
+ * @retval 0 on success
+ **/
+
+int prepare_config(const char *path, struct config *config)
+{
+	size_t len = 0;
+	char *opt, *val, *line = NULL;
+	FILE *configfile = fopen(path, "r");
+
+	if (config == NULL) {
+		fprintf(stderr, "error: config is NULL\n");
+		return 1;
+	}
+
+	if (configfile == NULL) {
+		perror("fopen");
+		fprintf(stderr, "error: unable to read configfile\n");
+		free(config);
+		return 1;
+	}
+
+	while (getline(&line, &len, configfile) != -1) {
+		if (line[0] == '#' || line[0] == ' ')
+			continue;
+
+		sscanf(line, "%as = %as", &opt, &val);
+
+		dprintf("parsing: %s -> %s\n", opt, val);
+
+		if (strncmp("sleep", opt, strlen(opt)) == 0)
+			sscanf(val, "%li", &config->sleep);
+
+		else if (strncmp("load", opt, strlen(opt)) == 0)
+			sscanf(val, "%li", &config->load);
+
+		else if (strncmp("load_step", opt, strlen(opt)) == 0)
+			sscanf(val, "%li", &config->load_step);
+
+		else if (strncmp("sleep_step", opt, strlen(opt)) == 0)
+			sscanf(val, "%li", &config->sleep_step);
+
+		else if (strncmp("cycles", opt, strlen(opt)) == 0)
+			sscanf(val, "%u", &config->cycles);
+
+		else if (strncmp("rounds", opt, strlen(opt)) == 0)
+			sscanf(val, "%u", &config->rounds);
+
+		else if (strncmp("verbose", opt, strlen(opt)) == 0)
+			sscanf(val, "%u", &config->verbose);
+
+		else if (strncmp("output", opt, strlen(opt)) == 0)
+			config->output = prepare_output(val); 
+
+		else if (strncmp("cpu", opt, strlen(opt)) == 0)
+			sscanf(val, "%u", &config->cpu);
+
+		else if (strncmp("governor", opt, 14) == 0)
+			strncpy(config->governor, val, 14);
+
+		else if (strncmp("priority", opt, strlen(opt)) == 0) {
+			if (string_to_prio(val) != SCHED_ERR)
+				config->prio = string_to_prio(val);
+		}
+	}
+
+	free(line);
+	free(opt);
+	free(val);
+
+	return 0;
+}
diff --git a/tools/power/cpupower/bench/parse.h b/tools/power/cpupower/bench/parse.h
new file mode 100644
index 000000000000..a8dc632d9eee
--- /dev/null
+++ b/tools/power/cpupower/bench/parse.h
@@ -0,0 +1,53 @@
+/*  cpufreq-bench CPUFreq microbenchmark
+ *
+ *  Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/* struct that holds the required config parameters */
+struct config
+{
+	long sleep;		/* sleep time in µs */
+	long load;		/* load time in µs */
+	long sleep_step;	/* time value which changes the
+				 * sleep time after every round in µs */
+	long load_step;		/* time value which changes the
+				 * load time after every round in µs */
+	unsigned int cycles;	/* calculation cycles with the same sleep/load time */
+	unsigned int rounds;	/* calculation rounds with iterated sleep/load time */
+	unsigned int cpu;	/* cpu for which the affinity is set */
+	char governor[15];	/* cpufreq governor */
+	enum sched_prio		/* possible scheduler priorities */
+	{
+		SCHED_ERR = -1,
+		SCHED_HIGH,
+		SCHED_DEFAULT,
+		SCHED_LOW
+	} prio;
+
+	unsigned int verbose;	/* verbose output */
+	FILE *output;		/* logfile */
+	char *output_filename;	/* logfile name, must be freed at the end
+				   if output != NULL and output != stdout*/
+};
+
+enum sched_prio string_to_prio(const char *str);
+
+FILE *prepare_output(const char *dir);
+
+int prepare_config(const char *path, struct config *config);
+struct config *prepare_default_config();
+
diff --git a/tools/power/cpupower/bench/system.c b/tools/power/cpupower/bench/system.c
new file mode 100644
index 000000000000..f01e3f4be84c
--- /dev/null
+++ b/tools/power/cpupower/bench/system.c
@@ -0,0 +1,191 @@
+/*  cpufreq-bench CPUFreq microbenchmark
+ *
+ *  Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include <stdio.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <unistd.h>
+
+#include <sched.h>
+
+#include <cpufreq.h>
+
+#include "config.h"
+#include "system.h"
+
+/**
+ * returns time since epoch in µs
+ *
+ * @retval time
+ **/
+
+long long int get_time()
+{
+	struct timeval now;
+
+	gettimeofday(&now, NULL);
+
+	return (long long int)(now.tv_sec * 1000000LL + now.tv_usec);
+}
+
+/**
+ * sets the cpufreq governor
+ *
+ * @param governor cpufreq governor name
+ * @param cpu cpu for which the governor should be set
+ *
+ * @retval 0 on success
+ * @retval -1 when failed
+ **/
+
+int set_cpufreq_governor(char *governor, unsigned int cpu)
+{
+
+	dprintf("set %s as cpufreq governor\n", governor);
+
+	if (cpufreq_cpu_exists(cpu) != 0) {
+		perror("cpufreq_cpu_exists");
+		fprintf(stderr, "error: cpu %u does not exist\n", cpu);
+		return -1;
+	}
+
+	if (cpufreq_modify_policy_governor(cpu, governor) != 0) {
+		perror("cpufreq_modify_policy_governor");
+		fprintf(stderr, "error: unable to set %s governor\n", governor);
+		return -1;
+	}
+
+	return 0;
+}
+
+/**
+ * sets cpu affinity for the process
+ *
+ * @param cpu cpu# to which the affinity should be set
+ *
+ * @retval 0 on success
+ * @retval -1 when setting the affinity failed
+ **/
+
+int set_cpu_affinity(unsigned int cpu)
+{
+	cpu_set_t cpuset;
+
+	CPU_ZERO(&cpuset);
+	CPU_SET(cpu, &cpuset);
+
+	dprintf("set affinity to cpu #%u\n", cpu);
+
+	if (sched_setaffinity(getpid(), sizeof(cpu_set_t), &cpuset) < 0) {
+		perror("sched_setaffinity");
+		fprintf(stderr, "warning: unable to set cpu affinity\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+/**
+ * sets the process priority parameter
+ *
+ * @param priority priority value
+ *
+ * @retval 0 on success
+ * @retval -1 when setting the priority failed
+ **/
+
+int set_process_priority(int priority)
+{
+	struct sched_param param;
+
+	dprintf("set scheduler priority to %i\n", priority);
+
+	param.sched_priority = priority;
+
+	if (sched_setscheduler(0, SCHEDULER, &param) < 0) {
+		perror("sched_setscheduler");
+		fprintf(stderr, "warning: unable to set scheduler priority\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+/**
+ * notifies the user that the benchmark may run some time
+ *
+ * @param config benchmark config values
+ *
+ **/
+
+void prepare_user(const struct config *config)
+{
+	unsigned long sleep_time = 0;
+	unsigned long load_time = 0;
+	unsigned int round;
+
+	for (round = 0; round < config->rounds; round++) {
+		sleep_time +=  2 * config->cycles *
+			(config->sleep + config->sleep_step * round);
+		load_time += 2 * config->cycles *
+			(config->load + config->load_step * round) +
+			(config->load + config->load_step * round * 4);
+	}
+
+	if (config->verbose || config->output != stdout)
+		printf("approx. test duration: %im\n",
+		       (int)((sleep_time + load_time) / 60000000));
+}
+
+/**
+ * sets up the cpu affinity and scheduler priority
+ *
+ * @param config benchmark config values
+ *
+ **/
+
+void prepare_system(const struct config *config)
+{
+	if (config->verbose)
+		printf("set cpu affinity to cpu #%u\n", config->cpu);
+
+	set_cpu_affinity(config->cpu);
+
+	switch (config->prio) {
+	case SCHED_HIGH:
+		if (config->verbose)
+			printf("high priority condition requested\n");
+
+		set_process_priority(PRIORITY_HIGH);
+		break;
+	case SCHED_LOW:
+		if (config->verbose)
+			printf("low priority condition requested\n");
+
+		set_process_priority(PRIORITY_LOW);
+		break;
+	default:
+		if (config->verbose)
+			printf("default priority condition requested\n");
+
+		set_process_priority(PRIORITY_DEFAULT);
+	}
+}
+
diff --git a/tools/power/cpupower/bench/system.h b/tools/power/cpupower/bench/system.h
new file mode 100644
index 000000000000..3a8c858b78f0
--- /dev/null
+++ b/tools/power/cpupower/bench/system.h
@@ -0,0 +1,29 @@
+/*  cpufreq-bench CPUFreq microbenchmark
+ *
+ *  Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#include "parse.h"
+
+long long get_time();
+
+int set_cpufreq_governor(char *governor, unsigned int cpu);
+int set_cpu_affinity(unsigned int cpu);
+int set_process_priority(int priority);
+
+void prepare_user(const struct config *config);
+void prepare_system(const struct config *config);
diff --git a/tools/power/cpupower/debug/i386/Makefile b/tools/power/cpupower/debug/i386/Makefile
new file mode 100644
index 000000000000..d08cc1ead9bc
--- /dev/null
+++ b/tools/power/cpupower/debug/i386/Makefile
@@ -0,0 +1,20 @@
+default: all
+
+centrino-decode: centrino-decode.c
+	$(CC) $(CFLAGS) -o centrino-decode centrino-decode.c
+
+dump_psb: dump_psb.c
+	$(CC) $(CFLAGS) -o dump_psb dump_psb.c
+
+intel_gsic: intel_gsic.c
+	$(CC) $(CFLAGS) -o intel_gsic -llrmi intel_gsic.c
+
+powernow-k8-decode: powernow-k8-decode.c
+	$(CC) $(CFLAGS) -o powernow-k8-decode powernow-k8-decode.c
+
+all: centrino-decode dump_psb intel_gsic powernow-k8-decode
+
+clean:
+	rm -rf centrino-decode dump_psb intel_gsic powernow-k8-decode
+
+.PHONY: all default clean
diff --git a/tools/power/cpupower/debug/i386/centrino-decode.c b/tools/power/cpupower/debug/i386/centrino-decode.c
new file mode 100644
index 000000000000..7ef24cce4926
--- /dev/null
+++ b/tools/power/cpupower/debug/i386/centrino-decode.c
@@ -0,0 +1,113 @@
+/*
+ *  (C) 2003 - 2004  Dominik Brodowski <linux@dominikbrodowski.de>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ * Based on code found in
+ * linux/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c
+ * and originally developed by Jeremy Fitzhardinge.
+ *
+ * USAGE: simply run it to decode the current settings on CPU 0,
+ *	  or pass the CPU number as argument, or pass the MSR content
+ *	  as argument.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <unistd.h>
+#include <errno.h>
+#include <fcntl.h>
+
+#include <sys/types.h>
+#include <sys/stat.h>
+
+#define MCPU	32
+
+#define MSR_IA32_PERF_STATUS	0x198
+
+static int rdmsr(unsigned int cpu, unsigned int msr,
+		 unsigned int *lo, unsigned int *hi)
+{
+	int fd;
+	char file[20];
+	unsigned long long val;
+	int retval = -1;
+
+	*lo = *hi = 0;
+
+	if (cpu > MCPU)
+		goto err1;
+
+	sprintf(file, "/dev/cpu/%d/msr", cpu);
+	fd = open(file, O_RDONLY);
+
+	if (fd < 0)
+		goto err1;
+
+	if (lseek(fd, msr, SEEK_CUR) == -1)
+		goto err2;
+
+	if (read(fd, &val, 8) != 8)
+		goto err2;
+
+	*lo = (uint32_t )(val & 0xffffffffull);
+	*hi = (uint32_t )(val>>32 & 0xffffffffull);
+
+	retval = 0;
+err2:
+	close(fd);
+err1:
+	return retval;
+}
+
+static void decode (unsigned int msr)
+{
+	unsigned int multiplier;
+	unsigned int mv;
+
+	multiplier = ((msr >> 8) & 0xFF);
+
+	mv = (((msr & 0xFF) * 16) + 700);
+
+	printf("0x%x means multiplier %d @ %d mV\n", msr, multiplier, mv);
+}
+
+static int decode_live(unsigned int cpu)
+{
+	unsigned int lo, hi;
+	int err;
+
+	err = rdmsr(cpu, MSR_IA32_PERF_STATUS, &lo, &hi);
+
+	if (err) {
+		printf("can't get MSR_IA32_PERF_STATUS for cpu %d\n", cpu);
+		printf("Possible trouble: you don't run an Enhanced SpeedStep capable cpu\n");
+		printf("or you are not root, or the msr driver is not present\n");
+		return 1;
+	}
+
+	decode(lo);
+
+	return 0;
+}
+
+int main (int argc, char **argv)
+{
+	unsigned int cpu, mode = 0;
+
+	if (argc < 2)
+		cpu = 0;
+	else {
+		cpu = strtoul(argv[1], NULL, 0);
+		if (cpu >= MCPU)
+			mode = 1;
+	}
+
+	if (mode)
+		decode(cpu);
+	else
+		decode_live(cpu);
+
+	return 0;
+}
diff --git a/tools/power/cpupower/debug/i386/dump_psb.c b/tools/power/cpupower/debug/i386/dump_psb.c
new file mode 100644
index 000000000000..8d6a47514253
--- /dev/null
+++ b/tools/power/cpupower/debug/i386/dump_psb.c
@@ -0,0 +1,196 @@
+/*
+ * dump_psb. (c) 2004, Dave Jones, Red Hat Inc.
+ * Licensed under the GPL v2.
+ */
+
+#include <fcntl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#define _GNU_SOURCE
+#include <getopt.h>
+
+#include <sys/mman.h>
+
+#define LEN (0x100000 - 0xc0000)
+#define OFFSET (0xc0000)
+
+#ifndef __packed
+#define __packed __attribute((packed))
+#endif
+
+static long relevant;
+
+static const int fid_to_mult[32] = {
+	110, 115, 120, 125, 50, 55, 60, 65,
+	70, 75, 80, 85, 90, 95, 100, 105,
+	30, 190, 40, 200, 130, 135, 140, 210,
+	150, 225, 160, 165, 170, 180, -1, -1,
+};
+
+static const int vid_to_voltage[32] = {
+	2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650,
+	1600, 1550, 1500, 1450, 1400, 1350, 1300, 0,
+	1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100,
+	1075, 1050, 1024, 1000, 975, 950, 925, 0,
+};
+
+struct psb_header {
+	char signature[10];
+	u_char version;
+	u_char flags;
+	u_short settlingtime;
+	u_char res1;
+	u_char numpst;
+} __packed;
+
+struct pst_header {
+	u_int32_t cpuid;
+	u_char fsb;
+	u_char maxfid;
+	u_char startvid;
+	u_char numpstates;
+} __packed;
+
+static u_int fsb;
+static u_int sgtc;
+
+static int
+decode_pst(char *p, int npstates)
+{
+	int i;
+	int freq, fid, vid;
+
+	for (i = 0; i < npstates; ++i) {
+		fid = *p++;
+		vid = *p++;
+		freq = 100 * fid_to_mult[fid] * fsb;
+
+		printf("   %2d %8dkHz  FID %02x (%2d.%01d)  VID %02x (%4dmV)\n",
+		       i,
+		       freq,
+		       fid, fid_to_mult[fid]/10, fid_to_mult[fid]%10,
+		       vid, vid_to_voltage[vid]);
+	}
+
+	return 0;
+}
+
+static
+void decode_psb(char *p, int numpst)
+{
+	int i;
+	struct psb_header *psb;
+	struct pst_header *pst;
+
+	psb = (struct psb_header*) p;
+
+	if (psb->version != 0x12)
+		return;
+
+	printf("PSB version: %hhx flags: %hhx settling time %hhuus res1 %hhx num pst %hhu\n",
+			psb->version,
+			psb->flags,
+			psb->settlingtime,
+			psb->res1,
+			psb->numpst);
+	sgtc = psb->settlingtime * 100;
+
+	if (sgtc < 10000)
+		sgtc = 10000;
+
+	p = ((char *) psb) + sizeof(struct psb_header);
+
+	if (numpst < 0)
+		numpst = psb->numpst;
+	else
+		printf("Overriding number of pst :%d\n", numpst);
+
+	for (i = 0; i < numpst; i++) {
+		pst = (struct pst_header*) p;
+
+		if (relevant != 0) {
+			if (relevant!= pst->cpuid)
+				goto next_one;
+		}
+
+		printf("  PST %d  cpuid %.3x fsb %hhu mfid %hhx svid %hhx numberstates %hhu\n",
+				i+1,
+				pst->cpuid,
+				pst->fsb,
+				pst->maxfid,
+				pst->startvid,
+				pst->numpstates);
+
+		fsb = pst->fsb;
+		decode_pst(p + sizeof(struct pst_header), pst->numpstates);
+
+next_one:
+		p += sizeof(struct pst_header) + 2*pst->numpstates;
+	}
+
+}
+
+static struct option info_opts[] = {
+	{.name = "numpst",	.has_arg=no_argument,	.flag=NULL, .val='n'},
+};
+
+void print_help(void)
+{
+	printf ("Usage: dump_psb [options]\n");
+	printf ("Options:\n");
+	printf ("  -n, --numpst     Set number of PST tables to scan\n");
+	printf ("  -r, --relevant   Only display PSTs relevant to cpuid N\n");
+}
+
+int
+main(int argc, char *argv[])
+{
+	int fd;
+	int numpst=-1;
+	int ret=0, cont=1;
+	char *mem = NULL;
+	char *p;
+
+	do {
+		ret = getopt_long(argc, argv, "hr:n:", info_opts, NULL);
+		switch (ret){
+		case '?':
+		case 'h':
+			print_help();
+			cont = 0;
+			break;
+		case 'r':
+			relevant = strtol(optarg, NULL, 16);
+			break;
+		case 'n':
+			numpst = strtol(optarg, NULL, 10);
+			break;
+		case -1:
+			cont = 0;
+			break;
+		}
+
+	} while(cont);
+
+	fd = open("/dev/mem", O_RDONLY);
+	if (fd < 0) {
+		printf ("Couldn't open /dev/mem. Are you root?\n");
+		exit(1);
+	}
+
+	mem = mmap(mem, 0x100000 - 0xc0000, PROT_READ, MAP_SHARED, fd, 0xc0000);
+	close(fd);
+
+	for (p = mem; p - mem < LEN; p+=16) {
+		if (memcmp(p, "AMDK7PNOW!", 10) == 0) {
+			decode_psb(p, numpst);
+			break;
+		}
+	}
+
+	munmap(mem, LEN);
+	return 0;
+}
diff --git a/tools/power/cpupower/debug/i386/intel_gsic.c b/tools/power/cpupower/debug/i386/intel_gsic.c
new file mode 100644
index 000000000000..53f5293c9c9a
--- /dev/null
+++ b/tools/power/cpupower/debug/i386/intel_gsic.c
@@ -0,0 +1,78 @@
+/*
+ *  (C) 2003  Bruno Ducrot
+ *  (C) 2004  Dominik Brodowski <linux@dominikbrodowski.de>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ * Based on code found in
+ * linux/include/asm-i386/ist.h and linux/arch/i386/kernel/setup.c
+ * and originally developed by Andy Grover <andrew.grover@intel.com>
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <lrmi.h>
+
+int main (void)
+{
+	struct LRMI_regs	r;
+	int			retval;
+
+	if (!LRMI_init())
+		return 0;
+
+	memset(&r, 0, sizeof(r));
+
+	r.eax = 0x0000E980;
+	r.edx = 0x47534943;
+
+	retval = LRMI_int(0x15, &r);
+
+	if (!retval) {
+		printf("Failed!\n");
+		return 0;
+	}
+	if (r.eax == 0x47534943) {
+		printf("BIOS supports GSIC call:\n");
+		printf("\tsignature: %c%c%c%c\n",
+		       (r.eax >> 24) & 0xff,
+		       (r.eax >> 16) & 0xff,
+		       (r.eax >> 8) & 0xff,
+		       (r.eax) & 0xff);
+		printf("\tcommand port = 0x%.4x\n",
+		       r.ebx & 0xffff);
+		printf("\tcommand =      0x%.4x\n",
+		       (r.ebx >> 16) & 0xffff);
+		printf("\tevent port =   0x%.8x\n", r.ecx);
+		printf("\tflags =        0x%.8x\n", r.edx);
+		if (((r.ebx >> 16) & 0xffff) != 0x82) {
+			printf("non-default command value. If speedstep-smi "
+			       "doesn't work out of the box,\nyou may want to "
+			       "try out the default value by passing "
+			       "smi_cmd=0x82 to the module\n ON YOUR OWN "
+			       "RISK.\n");
+		}
+		if ((r.ebx & 0xffff) != 0xb2) {
+			printf("non-default command port. If speedstep-smi "
+			       "doesn't work out of the box,\nyou may want to "
+			       "try out the default value by passing "
+			       "smi_port=0x82 to the module\n ON YOUR OWN "
+			       "RISK.\n");
+		}
+	} else {
+		printf("BIOS DOES NOT support GSIC call.  Dumping registers anyway:\n");
+		printf("eax = 0x%.8x\n", r.eax);
+		printf("ebx = 0x%.8x\n", r.ebx);
+		printf("ecx = 0x%.8x\n", r.ecx);
+		printf("edx = 0x%.8x\n", r.edx);
+		printf("Note also that some BIOS do not support the initial "
+		       "GSIC call, but the newer\nspeeedstep-smi driver may "
+		       "work.\nFor this, you need to pass some arguments to "
+		       "the speedstep-smi driver:\n");
+		printf("\tsmi_cmd=0x?? smi_port=0x?? smi_sig=1\n");
+		printf("\nUnfortunately, you have to know what exactly are "
+		       "smi_cmd and smi_port, and this\nis system "
+		       "dependant.\n");
+	}
+	return 1;
+}
diff --git a/tools/power/cpupower/debug/i386/powernow-k8-decode.c b/tools/power/cpupower/debug/i386/powernow-k8-decode.c
new file mode 100644
index 000000000000..638a6b3bfd97
--- /dev/null
+++ b/tools/power/cpupower/debug/i386/powernow-k8-decode.c
@@ -0,0 +1,96 @@
+/*
+ *  (C) 2004 Bruno Ducrot <ducrot@poupinou.org>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ * Based on code found in
+ * linux/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
+ * and originally developed by Paul Devriendt
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <unistd.h>
+#include <errno.h>
+#include <fcntl.h>
+
+#include <sys/types.h>
+#include <sys/stat.h>
+
+#define MCPU 32
+
+#define MSR_FIDVID_STATUS	0xc0010042
+
+#define MSR_S_HI_CURRENT_VID	0x0000001f
+#define MSR_S_LO_CURRENT_FID	0x0000003f
+
+static int get_fidvid(uint32_t cpu, uint32_t *fid, uint32_t *vid)
+{
+	int err = 1;
+	uint64_t msr = 0;
+	int fd;
+	char file[20];
+
+	if (cpu > MCPU)
+		goto out;
+
+	sprintf(file, "/dev/cpu/%d/msr", cpu);
+
+	fd = open(file, O_RDONLY);
+	if (fd < 0)
+		goto out;
+	lseek(fd, MSR_FIDVID_STATUS, SEEK_CUR);
+	if (read(fd, &msr, 8) != 8)
+		goto err1;
+
+	*fid = ((uint32_t )(msr & 0xffffffffull)) & MSR_S_LO_CURRENT_FID;
+	*vid = ((uint32_t )(msr>>32 & 0xffffffffull)) & MSR_S_HI_CURRENT_VID;
+	err = 0;
+err1:
+	close(fd);
+out:
+	return err;
+}
+
+
+/* Return a frequency in MHz, given an input fid */
+static uint32_t find_freq_from_fid(uint32_t fid)
+{
+	return 800 + (fid * 100);
+}
+
+/* Return a voltage in miliVolts, given an input vid */
+static uint32_t find_millivolts_from_vid(uint32_t vid)
+{
+	return 1550-vid*25;
+}
+
+int main (int argc, char *argv[])
+{
+	int err;
+	int cpu;
+	uint32_t fid, vid;
+
+	if (argc < 2)
+		cpu = 0;
+	else
+		cpu = strtoul(argv[1], NULL, 0);
+
+	err = get_fidvid(cpu, &fid, &vid);
+
+	if (err) {
+		printf("can't get fid, vid from MSR\n");
+		printf("Possible trouble: you don't run a powernow-k8 capable cpu\n");
+		printf("or you are not root, or the msr driver is not present\n");
+		exit(1);
+	}
+
+	
+	printf("cpu %d currently at %d MHz and %d mV\n",
+			cpu,
+			find_freq_from_fid(fid),
+			find_millivolts_from_vid(vid));
+	
+	return 0;
+}
diff --git a/tools/power/cpupower/debug/kernel/Makefile b/tools/power/cpupower/debug/kernel/Makefile
new file mode 100644
index 000000000000..96b146fe6f8d
--- /dev/null
+++ b/tools/power/cpupower/debug/kernel/Makefile
@@ -0,0 +1,23 @@
+obj-m	:=
+
+KDIR	:= /lib/modules/$(shell uname -r)/build
+PWD		:= $(shell pwd)
+KMISC   := /lib/modules/$(shell uname -r)/cpufrequtils/
+
+ifeq ("$(CONFIG_X86_TSC)", "y")
+  obj-m	 += cpufreq-test_tsc.o
+endif
+
+default:
+	$(MAKE) -C $(KDIR) M=$(PWD)
+
+clean:
+	- rm -rf *.o *.ko .tmp-versions .*.cmd .*.mod.* *.mod.c
+	- rm -rf .tmp_versions* Module.symvers modules.order
+
+install: default
+	install -d $(KMISC)
+	install -m 644 -c *.ko $(KMISC)
+	/sbin/depmod -a
+
+all:	default
diff --git a/tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c b/tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c
new file mode 100644
index 000000000000..66cace601e57
--- /dev/null
+++ b/tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c
@@ -0,0 +1,113 @@
+/*
+ * test module to check whether the TSC-based delay routine continues
+ * to work properly after cpufreq transitions. Needs ACPI to work
+ * properly.
+ *
+ * Based partly on the Power Management Timer (PMTMR) code to be found
+ * in arch/i386/kernel/timers/timer_pm.c on recent 2.6. kernels, especially
+ * code written by John Stultz. The read_pmtmr function was copied verbatim
+ * from that file.
+ *
+ * (C) 2004 Dominik Brodowski
+ *
+ * To use:
+ * 1.) pass clock=tsc to the kernel on your bootloader
+ * 2.) modprobe this module (it'll fail)
+ * 3.) change CPU frequency
+ * 4.) modprobe this module again
+ * 5.) if the third value, "diff_pmtmr", changes between 2. and 4., the
+ *     TSC-based delay routine on the Linux kernel does not correctly
+ *     handle the cpufreq transition. Please report this to
+ *     cpufreq@vger.kernel.org
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+
+#include <asm/io.h>
+
+#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+
+static int pm_tmr_ioport = 0;
+
+/*helper function to safely read acpi pm timesource*/
+static u32 read_pmtmr(void)
+{
+	u32 v1=0,v2=0,v3=0;
+	/* It has been reported that because of various broken
+	 * chipsets (ICH4, PIIX4 and PIIX4E) where the ACPI PM time
+	 * source is not latched, so you must read it multiple
+	 * times to insure a safe value is read.
+	 */
+	do {
+		v1 = inl(pm_tmr_ioport);
+		v2 = inl(pm_tmr_ioport);
+		v3 = inl(pm_tmr_ioport);
+	} while ((v1 > v2 && v1 < v3) || (v2 > v3 && v2 < v1)
+		 || (v3 > v1 && v3 < v2));
+
+	/* mask the output to 24 bits */
+	return (v2 & 0xFFFFFF);
+}
+
+static int __init cpufreq_test_tsc(void)
+{
+	u32 now, then, diff;
+	u64 now_tsc, then_tsc, diff_tsc;
+	int i;
+
+	/* the following code snipped is copied from arch/x86/kernel/acpi/boot.c
+	   of Linux v2.6.25. */
+
+	/* detect the location of the ACPI PM Timer */
+	if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) {
+		/* FADT rev. 2 */
+		if (acpi_gbl_FADT.xpm_timer_block.space_id !=
+		    ACPI_ADR_SPACE_SYSTEM_IO)
+			return 0;
+
+		pm_tmr_ioport = acpi_gbl_FADT.xpm_timer_block.address;
+		/*
+		 * "X" fields are optional extensions to the original V1.0
+		 * fields, so we must selectively expand V1.0 fields if the
+		 * corresponding X field is zero.
+	 	 */
+		if (!pm_tmr_ioport)
+			pm_tmr_ioport = acpi_gbl_FADT.pm_timer_block;
+	} else {
+		/* FADT rev. 1 */
+		pm_tmr_ioport = acpi_gbl_FADT.pm_timer_block;
+	}
+
+	printk(KERN_DEBUG "start--> \n");
+	then = read_pmtmr();
+        rdtscll(then_tsc);
+	for (i=0;i<20;i++) {
+		mdelay(100);
+		now = read_pmtmr();
+		rdtscll(now_tsc);
+		diff = (now - then) & 0xFFFFFF;
+		diff_tsc = now_tsc - then_tsc;
+		printk(KERN_DEBUG "t1: %08u t2: %08u diff_pmtmr: %08u diff_tsc: %016llu\n", then, now, diff, diff_tsc);
+		then = now;
+		then_tsc = now_tsc;
+	}
+	printk(KERN_DEBUG "<-- end \n");
+	return -ENODEV;
+}
+
+static void __exit cpufreq_none(void)
+{
+	return;
+}
+
+module_init(cpufreq_test_tsc)
+module_exit(cpufreq_none)
+
+
+MODULE_AUTHOR("Dominik Brodowski");
+MODULE_DESCRIPTION("Verify the TSC cpufreq notifier working correctly -- needs ACPI-enabled system");
+MODULE_LICENSE ("GPL");
diff --git a/tools/power/cpupower/debug/x86_64/Makefile b/tools/power/cpupower/debug/x86_64/Makefile
new file mode 100644
index 000000000000..dbf13998462a
--- /dev/null
+++ b/tools/power/cpupower/debug/x86_64/Makefile
@@ -0,0 +1,14 @@
+default: all
+
+centrino-decode: centrino-decode.c
+	$(CC) $(CFLAGS) -o centrino-decode centrino-decode.c
+
+powernow-k8-decode: powernow-k8-decode.c
+	$(CC) $(CFLAGS) -o powernow-k8-decode powernow-k8-decode.c
+
+all: centrino-decode powernow-k8-decode
+
+clean:
+	rm -rf centrino-decode powernow-k8-decode
+
+.PHONY: all default clean
diff --git a/tools/power/cpupower/debug/x86_64/centrino-decode.c b/tools/power/cpupower/debug/x86_64/centrino-decode.c
new file mode 120000
index 000000000000..26fb3f1d8fc7
--- /dev/null
+++ b/tools/power/cpupower/debug/x86_64/centrino-decode.c
@@ -0,0 +1 @@
+../i386/centrino-decode.c
\ No newline at end of file
diff --git a/tools/power/cpupower/debug/x86_64/powernow-k8-decode.c b/tools/power/cpupower/debug/x86_64/powernow-k8-decode.c
new file mode 120000
index 000000000000..eb30c79cf9df
--- /dev/null
+++ b/tools/power/cpupower/debug/x86_64/powernow-k8-decode.c
@@ -0,0 +1 @@
+../i386/powernow-k8-decode.c
\ No newline at end of file
diff --git a/tools/power/cpupower/lib/cpufreq.c b/tools/power/cpupower/lib/cpufreq.c
new file mode 100644
index 000000000000..d961101d1cea
--- /dev/null
+++ b/tools/power/cpupower/lib/cpufreq.c
@@ -0,0 +1,208 @@
+/*
+ *  (C) 2004-2009  Dominik Brodowski <linux@dominikbrodowski.de>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ */
+
+
+#include <stdio.h>
+#include <errno.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include "cpufreq.h"
+#include "sysfs.h"
+
+int cpufreq_cpu_exists(unsigned int cpu)
+{
+	return sysfs_cpu_exists(cpu);
+}
+
+unsigned long cpufreq_get_freq_kernel(unsigned int cpu)
+{
+	return sysfs_get_freq_kernel(cpu);
+}
+
+unsigned long cpufreq_get_freq_hardware(unsigned int cpu)
+{
+	return sysfs_get_freq_hardware(cpu);
+}
+
+unsigned long cpufreq_get_transition_latency(unsigned int cpu)
+{
+	return sysfs_get_freq_transition_latency(cpu);
+}
+
+int cpufreq_get_hardware_limits(unsigned int cpu,
+				unsigned long *min,
+				unsigned long *max)
+{
+	if ((!min) || (!max))
+		return -EINVAL;
+	return sysfs_get_freq_hardware_limits(cpu, min, max);
+}
+
+char *cpufreq_get_driver(unsigned int cpu)
+{
+	return sysfs_get_freq_driver(cpu);
+}
+
+void cpufreq_put_driver(char *ptr)
+{
+	if (!ptr)
+		return;
+	free(ptr);
+}
+
+struct cpufreq_policy *cpufreq_get_policy(unsigned int cpu)
+{
+	return sysfs_get_freq_policy(cpu);
+}
+
+void cpufreq_put_policy(struct cpufreq_policy *policy)
+{
+	if ((!policy) || (!policy->governor))
+		return;
+
+	free(policy->governor);
+	policy->governor = NULL;
+	free(policy);
+}
+
+struct cpufreq_available_governors *cpufreq_get_available_governors(unsigned
+								int cpu)
+{
+	return sysfs_get_freq_available_governors(cpu);
+}
+
+void cpufreq_put_available_governors(struct cpufreq_available_governors *any)
+{
+	struct cpufreq_available_governors *tmp, *next;
+
+	if (!any)
+		return;
+
+	tmp = any->first;
+	while (tmp) {
+		next = tmp->next;
+		if (tmp->governor)
+			free(tmp->governor);
+		free(tmp);
+		tmp = next;
+	}
+}
+
+
+struct cpufreq_available_frequencies
+*cpufreq_get_available_frequencies(unsigned int cpu)
+{
+	return sysfs_get_available_frequencies(cpu);
+}
+
+void cpufreq_put_available_frequencies(struct cpufreq_available_frequencies
+				*any) {
+	struct cpufreq_available_frequencies *tmp, *next;
+
+	if (!any)
+		return;
+
+	tmp = any->first;
+	while (tmp) {
+		next = tmp->next;
+		free(tmp);
+		tmp = next;
+	}
+}
+
+
+struct cpufreq_affected_cpus *cpufreq_get_affected_cpus(unsigned int cpu)
+{
+	return sysfs_get_freq_affected_cpus(cpu);
+}
+
+void cpufreq_put_affected_cpus(struct cpufreq_affected_cpus *any)
+{
+	struct cpufreq_affected_cpus *tmp, *next;
+
+	if (!any)
+		return;
+
+	tmp = any->first;
+	while (tmp) {
+		next = tmp->next;
+		free(tmp);
+		tmp = next;
+	}
+}
+
+
+struct cpufreq_affected_cpus *cpufreq_get_related_cpus(unsigned int cpu)
+{
+	return sysfs_get_freq_related_cpus(cpu);
+}
+
+void cpufreq_put_related_cpus(struct cpufreq_affected_cpus *any)
+{
+	cpufreq_put_affected_cpus(any);
+}
+
+
+int cpufreq_set_policy(unsigned int cpu, struct cpufreq_policy *policy)
+{
+	if (!policy || !(policy->governor))
+		return -EINVAL;
+
+	return sysfs_set_freq_policy(cpu, policy);
+}
+
+
+int cpufreq_modify_policy_min(unsigned int cpu, unsigned long min_freq)
+{
+	return sysfs_modify_freq_policy_min(cpu, min_freq);
+}
+
+
+int cpufreq_modify_policy_max(unsigned int cpu, unsigned long max_freq)
+{
+	return sysfs_modify_freq_policy_max(cpu, max_freq);
+}
+
+
+int cpufreq_modify_policy_governor(unsigned int cpu, char *governor)
+{
+	if ((!governor) || (strlen(governor) > 19))
+		return -EINVAL;
+
+	return sysfs_modify_freq_policy_governor(cpu, governor);
+}
+
+int cpufreq_set_frequency(unsigned int cpu, unsigned long target_frequency)
+{
+	return sysfs_set_frequency(cpu, target_frequency);
+}
+
+struct cpufreq_stats *cpufreq_get_stats(unsigned int cpu,
+					unsigned long long *total_time)
+{
+	return sysfs_get_freq_stats(cpu, total_time);
+}
+
+void cpufreq_put_stats(struct cpufreq_stats *any)
+{
+	struct cpufreq_stats *tmp, *next;
+
+	if (!any)
+		return;
+
+	tmp = any->first;
+	while (tmp) {
+		next = tmp->next;
+		free(tmp);
+		tmp = next;
+	}
+}
+
+unsigned long cpufreq_get_transitions(unsigned int cpu)
+{
+	return sysfs_get_freq_transitions(cpu);
+}
diff --git a/tools/power/cpupower/lib/cpufreq.h b/tools/power/cpupower/lib/cpufreq.h
new file mode 100644
index 000000000000..3aae8e7a0839
--- /dev/null
+++ b/tools/power/cpupower/lib/cpufreq.h
@@ -0,0 +1,223 @@
+/*
+ *  cpufreq.h - definitions for libcpufreq
+ *
+ *  Copyright (C) 2004-2009  Dominik Brodowski <linux@dominikbrodowski.de>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _CPUFREQ_H
+#define _CPUFREQ_H 1
+
+struct cpufreq_policy {
+	unsigned long min;
+	unsigned long max;
+	char *governor;
+};
+
+struct cpufreq_available_governors {
+	char *governor;
+	struct cpufreq_available_governors *next;
+	struct cpufreq_available_governors *first;
+};
+
+struct cpufreq_available_frequencies {
+	unsigned long frequency;
+	struct cpufreq_available_frequencies *next;
+	struct cpufreq_available_frequencies *first;
+};
+
+
+struct cpufreq_affected_cpus {
+	unsigned int cpu;
+	struct cpufreq_affected_cpus *next;
+	struct cpufreq_affected_cpus *first;
+};
+
+struct cpufreq_stats {
+	unsigned long frequency;
+	unsigned long long time_in_state;
+	struct cpufreq_stats *next;
+	struct cpufreq_stats *first;
+};
+
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * returns 0 if the specified CPU is present (it doesn't say
+ * whether it is online!), and an error value if not.
+ */
+
+extern int cpufreq_cpu_exists(unsigned int cpu);
+
+/* determine current CPU frequency
+ * - _kernel variant means kernel's opinion of CPU frequency
+ * - _hardware variant means actual hardware CPU frequency,
+ *    which is only available to root.
+ *
+ * returns 0 on failure, else frequency in kHz.
+ */
+
+extern unsigned long cpufreq_get_freq_kernel(unsigned int cpu);
+
+extern unsigned long cpufreq_get_freq_hardware(unsigned int cpu);
+
+#define cpufreq_get(cpu) cpufreq_get_freq_kernel(cpu);
+
+
+/* determine CPU transition latency
+ *
+ * returns 0 on failure, else transition latency in 10^(-9) s = nanoseconds
+ */
+extern unsigned long cpufreq_get_transition_latency(unsigned int cpu);
+
+
+/* determine hardware CPU frequency limits
+ *
+ * These may be limited further by thermal, energy or other
+ * considerations by cpufreq policy notifiers in the kernel.
+ */
+
+extern int cpufreq_get_hardware_limits(unsigned int cpu,
+				unsigned long *min,
+				unsigned long *max);
+
+
+/* determine CPUfreq driver used
+ *
+ * Remember to call cpufreq_put_driver when no longer needed
+ * to avoid memory leakage, please.
+ */
+
+extern char *cpufreq_get_driver(unsigned int cpu);
+
+extern void cpufreq_put_driver(char *ptr);
+
+
+/* determine CPUfreq policy currently used
+ *
+ * Remember to call cpufreq_put_policy when no longer needed
+ * to avoid memory leakage, please.
+ */
+
+
+extern struct cpufreq_policy *cpufreq_get_policy(unsigned int cpu);
+
+extern void cpufreq_put_policy(struct cpufreq_policy *policy);
+
+
+/* determine CPUfreq governors currently available
+ *
+ * may be modified by modprobe'ing or rmmod'ing other governors. Please
+ * free allocated memory by calling cpufreq_put_available_governors
+ * after use.
+ */
+
+
+extern struct cpufreq_available_governors
+*cpufreq_get_available_governors(unsigned int cpu);
+
+extern void cpufreq_put_available_governors(
+	struct cpufreq_available_governors *first);
+
+
+/* determine CPU frequency states available
+ *
+ * Only present on _some_ ->target() cpufreq drivers. For information purposes
+ * only. Please free allocated memory by calling
+ * cpufreq_put_available_frequencies after use.
+ */
+
+extern struct cpufreq_available_frequencies
+*cpufreq_get_available_frequencies(unsigned int cpu);
+
+extern void cpufreq_put_available_frequencies(
+		struct cpufreq_available_frequencies *first);
+
+
+/* determine affected CPUs
+ *
+ * Remember to call cpufreq_put_affected_cpus when no longer needed
+ * to avoid memory leakage, please.
+ */
+
+extern struct cpufreq_affected_cpus *cpufreq_get_affected_cpus(unsigned
+							int cpu);
+
+extern void cpufreq_put_affected_cpus(struct cpufreq_affected_cpus *first);
+
+
+/* determine related CPUs
+ *
+ * Remember to call cpufreq_put_related_cpus when no longer needed
+ * to avoid memory leakage, please.
+ */
+
+extern struct cpufreq_affected_cpus *cpufreq_get_related_cpus(unsigned
+							int cpu);
+
+extern void cpufreq_put_related_cpus(struct cpufreq_affected_cpus *first);
+
+
+/* determine stats for cpufreq subsystem
+ *
+ * This is not available in all kernel versions or configurations.
+ */
+
+extern struct cpufreq_stats *cpufreq_get_stats(unsigned int cpu,
+					unsigned long long *total_time);
+
+extern void cpufreq_put_stats(struct cpufreq_stats *stats);
+
+extern unsigned long cpufreq_get_transitions(unsigned int cpu);
+
+
+/* set new cpufreq policy
+ *
+ * Tries to set the passed policy as new policy as close as possible,
+ * but results may differ depending e.g. on governors being available.
+ */
+
+extern int cpufreq_set_policy(unsigned int cpu, struct cpufreq_policy *policy);
+
+
+/* modify a policy by only changing min/max freq or governor
+ *
+ * Does not check whether result is what was intended.
+ */
+
+extern int cpufreq_modify_policy_min(unsigned int cpu, unsigned long min_freq);
+extern int cpufreq_modify_policy_max(unsigned int cpu, unsigned long max_freq);
+extern int cpufreq_modify_policy_governor(unsigned int cpu, char *governor);
+
+
+/* set a specific frequency
+ *
+ * Does only work if userspace governor can be used and no external
+ * interference (other calls to this function or to set/modify_policy)
+ * occurs. Also does not work on ->range() cpufreq drivers.
+ */
+
+extern int cpufreq_set_frequency(unsigned int cpu,
+				unsigned long target_frequency);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _CPUFREQ_H */
diff --git a/tools/power/cpupower/lib/sysfs.c b/tools/power/cpupower/lib/sysfs.c
new file mode 100644
index 000000000000..870713a75a81
--- /dev/null
+++ b/tools/power/cpupower/lib/sysfs.c
@@ -0,0 +1,672 @@
+/*
+ *  (C) 2004-2009  Dominik Brodowski <linux@dominikbrodowski.de>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ */
+
+#include <stdio.h>
+#include <errno.h>
+#include <stdlib.h>
+#include <string.h>
+#include <limits.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+
+#include "cpufreq.h"
+
+#define PATH_TO_CPU "/sys/devices/system/cpu/"
+#define MAX_LINE_LEN 4096
+#define SYSFS_PATH_MAX 255
+
+
+static unsigned int sysfs_read_file(const char *path, char *buf, size_t buflen)
+{
+	int fd;
+	ssize_t numread;
+
+	fd = open(path, O_RDONLY);
+	if (fd == -1)
+		return 0;
+
+	numread = read(fd, buf, buflen - 1);
+	if (numread < 1) {
+		close(fd);
+		return 0;
+	}
+
+	buf[numread] = '\0';
+	close(fd);
+
+	return (unsigned int) numread;
+}
+
+
+/* CPUFREQ sysfs access **************************************************/
+
+/* helper function to read file from /sys into given buffer */
+/* fname is a relative path under "cpuX/cpufreq" dir */
+static unsigned int sysfs_cpufreq_read_file(unsigned int cpu, const char *fname,
+					    char *buf, size_t buflen)
+{
+	char path[SYSFS_PATH_MAX];
+
+	snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpufreq/%s",
+			 cpu, fname);
+	return sysfs_read_file(path, buf, buflen);
+}
+
+/* helper function to write a new value to a /sys file */
+/* fname is a relative path under "cpuX/cpufreq" dir */
+static unsigned int sysfs_cpufreq_write_file(unsigned int cpu,
+					     const char *fname,
+					     const char *value, size_t len)
+{
+	char path[SYSFS_PATH_MAX];
+	int fd;
+	ssize_t numwrite;
+
+	snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpufreq/%s",
+			 cpu, fname);
+
+	fd = open(path, O_WRONLY);
+	if (fd == -1)
+		return 0;
+
+	numwrite = write(fd, value, len);
+	if (numwrite < 1) {
+		close(fd);
+		return 0;
+	}
+
+	close(fd);
+
+	return (unsigned int) numwrite;
+}
+
+/* read access to files which contain one numeric value */
+
+enum cpufreq_value {
+	CPUINFO_CUR_FREQ,
+	CPUINFO_MIN_FREQ,
+	CPUINFO_MAX_FREQ,
+	CPUINFO_LATENCY,
+	SCALING_CUR_FREQ,
+	SCALING_MIN_FREQ,
+	SCALING_MAX_FREQ,
+	STATS_NUM_TRANSITIONS,
+	MAX_CPUFREQ_VALUE_READ_FILES
+};
+
+static const char *cpufreq_value_files[MAX_CPUFREQ_VALUE_READ_FILES] = {
+	[CPUINFO_CUR_FREQ] = "cpuinfo_cur_freq",
+	[CPUINFO_MIN_FREQ] = "cpuinfo_min_freq",
+	[CPUINFO_MAX_FREQ] = "cpuinfo_max_freq",
+	[CPUINFO_LATENCY]  = "cpuinfo_transition_latency",
+	[SCALING_CUR_FREQ] = "scaling_cur_freq",
+	[SCALING_MIN_FREQ] = "scaling_min_freq",
+	[SCALING_MAX_FREQ] = "scaling_max_freq",
+	[STATS_NUM_TRANSITIONS] = "stats/total_trans"
+};
+
+
+static unsigned long sysfs_cpufreq_get_one_value(unsigned int cpu,
+						 enum cpufreq_value which)
+{
+	unsigned long value;
+	unsigned int len;
+	char linebuf[MAX_LINE_LEN];
+	char *endp;
+
+	if (which >= MAX_CPUFREQ_VALUE_READ_FILES)
+		return 0;
+
+	len = sysfs_cpufreq_read_file(cpu, cpufreq_value_files[which],
+				linebuf, sizeof(linebuf));
+
+	if (len == 0)
+		return 0;
+
+	value = strtoul(linebuf, &endp, 0);
+
+	if (endp == linebuf || errno == ERANGE)
+		return 0;
+
+	return value;
+}
+
+/* read access to files which contain one string */
+
+enum cpufreq_string {
+	SCALING_DRIVER,
+	SCALING_GOVERNOR,
+	MAX_CPUFREQ_STRING_FILES
+};
+
+static const char *cpufreq_string_files[MAX_CPUFREQ_STRING_FILES] = {
+	[SCALING_DRIVER] = "scaling_driver",
+	[SCALING_GOVERNOR] = "scaling_governor",
+};
+
+
+static char *sysfs_cpufreq_get_one_string(unsigned int cpu,
+					   enum cpufreq_string which)
+{
+	char linebuf[MAX_LINE_LEN];
+	char *result;
+	unsigned int len;
+
+	if (which >= MAX_CPUFREQ_STRING_FILES)
+		return NULL;
+
+	len = sysfs_cpufreq_read_file(cpu, cpufreq_string_files[which],
+				linebuf, sizeof(linebuf));
+	if (len == 0)
+		return NULL;
+
+	result = strdup(linebuf);
+	if (result == NULL)
+		return NULL;
+
+	if (result[strlen(result) - 1] == '\n')
+		result[strlen(result) - 1] = '\0';
+
+	return result;
+}
+
+/* write access */
+
+enum cpufreq_write {
+	WRITE_SCALING_MIN_FREQ,
+	WRITE_SCALING_MAX_FREQ,
+	WRITE_SCALING_GOVERNOR,
+	WRITE_SCALING_SET_SPEED,
+	MAX_CPUFREQ_WRITE_FILES
+};
+
+static const char *cpufreq_write_files[MAX_CPUFREQ_WRITE_FILES] = {
+	[WRITE_SCALING_MIN_FREQ] = "scaling_min_freq",
+	[WRITE_SCALING_MAX_FREQ] = "scaling_max_freq",
+	[WRITE_SCALING_GOVERNOR] = "scaling_governor",
+	[WRITE_SCALING_SET_SPEED] = "scaling_setspeed",
+};
+
+static int sysfs_cpufreq_write_one_value(unsigned int cpu,
+					 enum cpufreq_write which,
+					 const char *new_value, size_t len)
+{
+	if (which >= MAX_CPUFREQ_WRITE_FILES)
+		return 0;
+
+	if (sysfs_cpufreq_write_file(cpu, cpufreq_write_files[which],
+					new_value, len) != len)
+		return -ENODEV;
+
+	return 0;
+};
+
+unsigned long sysfs_get_freq_kernel(unsigned int cpu)
+{
+	return sysfs_cpufreq_get_one_value(cpu, SCALING_CUR_FREQ);
+}
+
+unsigned long sysfs_get_freq_hardware(unsigned int cpu)
+{
+	return sysfs_cpufreq_get_one_value(cpu, CPUINFO_CUR_FREQ);
+}
+
+unsigned long sysfs_get_freq_transition_latency(unsigned int cpu)
+{
+	return sysfs_cpufreq_get_one_value(cpu, CPUINFO_LATENCY);
+}
+
+int sysfs_get_freq_hardware_limits(unsigned int cpu,
+			      unsigned long *min,
+			      unsigned long *max)
+{
+	if ((!min) || (!max))
+		return -EINVAL;
+
+	*min = sysfs_cpufreq_get_one_value(cpu, CPUINFO_MIN_FREQ);
+	if (!*min)
+		return -ENODEV;
+
+	*max = sysfs_cpufreq_get_one_value(cpu, CPUINFO_MAX_FREQ);
+	if (!*max)
+		return -ENODEV;
+
+	return 0;
+}
+
+char *sysfs_get_freq_driver(unsigned int cpu)
+{
+	return sysfs_cpufreq_get_one_string(cpu, SCALING_DRIVER);
+}
+
+struct cpufreq_policy *sysfs_get_freq_policy(unsigned int cpu)
+{
+	struct cpufreq_policy *policy;
+
+	policy = malloc(sizeof(struct cpufreq_policy));
+	if (!policy)
+		return NULL;
+
+	policy->governor = sysfs_cpufreq_get_one_string(cpu, SCALING_GOVERNOR);
+	if (!policy->governor) {
+		free(policy);
+		return NULL;
+	}
+	policy->min = sysfs_cpufreq_get_one_value(cpu, SCALING_MIN_FREQ);
+	policy->max = sysfs_cpufreq_get_one_value(cpu, SCALING_MAX_FREQ);
+	if ((!policy->min) || (!policy->max)) {
+		free(policy->governor);
+		free(policy);
+		return NULL;
+	}
+
+	return policy;
+}
+
+struct cpufreq_available_governors *
+sysfs_get_freq_available_governors(unsigned int cpu) {
+	struct cpufreq_available_governors *first = NULL;
+	struct cpufreq_available_governors *current = NULL;
+	char linebuf[MAX_LINE_LEN];
+	unsigned int pos, i;
+	unsigned int len;
+
+	len = sysfs_cpufreq_read_file(cpu, "scaling_available_governors",
+				linebuf, sizeof(linebuf));
+	if (len == 0)
+		return NULL;
+
+	pos = 0;
+	for (i = 0; i < len; i++) {
+		if (linebuf[i] == ' ' || linebuf[i] == '\n') {
+			if (i - pos < 2)
+				continue;
+			if (current) {
+				current->next = malloc(sizeof(*current));
+				if (!current->next)
+					goto error_out;
+				current = current->next;
+			} else {
+				first = malloc(sizeof(*first));
+				if (!first)
+					goto error_out;
+				current = first;
+			}
+			current->first = first;
+			current->next = NULL;
+
+			current->governor = malloc(i - pos + 1);
+			if (!current->governor)
+				goto error_out;
+
+			memcpy(current->governor, linebuf + pos, i - pos);
+			current->governor[i - pos] = '\0';
+			pos = i + 1;
+		}
+	}
+
+	return first;
+
+ error_out:
+	while (first) {
+		current = first->next;
+		if (first->governor)
+			free(first->governor);
+		free(first);
+		first = current;
+	}
+	return NULL;
+}
+
+
+struct cpufreq_available_frequencies *
+sysfs_get_available_frequencies(unsigned int cpu) {
+	struct cpufreq_available_frequencies *first = NULL;
+	struct cpufreq_available_frequencies *current = NULL;
+	char one_value[SYSFS_PATH_MAX];
+	char linebuf[MAX_LINE_LEN];
+	unsigned int pos, i;
+	unsigned int len;
+
+	len = sysfs_cpufreq_read_file(cpu, "scaling_available_frequencies",
+				linebuf, sizeof(linebuf));
+	if (len == 0)
+		return NULL;
+
+	pos = 0;
+	for (i = 0; i < len; i++) {
+		if (linebuf[i] == ' ' || linebuf[i] == '\n') {
+			if (i - pos < 2)
+				continue;
+			if (i - pos >= SYSFS_PATH_MAX)
+				goto error_out;
+			if (current) {
+				current->next = malloc(sizeof(*current));
+				if (!current->next)
+					goto error_out;
+				current = current->next;
+			} else {
+				first = malloc(sizeof(*first));
+				if (!first)
+					goto error_out;
+				current = first;
+			}
+			current->first = first;
+			current->next = NULL;
+
+			memcpy(one_value, linebuf + pos, i - pos);
+			one_value[i - pos] = '\0';
+			if (sscanf(one_value, "%lu", &current->frequency) != 1)
+				goto error_out;
+
+			pos = i + 1;
+		}
+	}
+
+	return first;
+
+ error_out:
+	while (first) {
+		current = first->next;
+		free(first);
+		first = current;
+	}
+	return NULL;
+}
+
+static struct cpufreq_affected_cpus *sysfs_get_cpu_list(unsigned int cpu,
+							const char *file)
+{
+	struct cpufreq_affected_cpus *first = NULL;
+	struct cpufreq_affected_cpus *current = NULL;
+	char one_value[SYSFS_PATH_MAX];
+	char linebuf[MAX_LINE_LEN];
+	unsigned int pos, i;
+	unsigned int len;
+
+	len = sysfs_cpufreq_read_file(cpu, file, linebuf, sizeof(linebuf));
+	if (len == 0)
+		return NULL;
+
+	pos = 0;
+	for (i = 0; i < len; i++) {
+		if (i == len || linebuf[i] == ' ' || linebuf[i] == '\n') {
+			if (i - pos  < 1)
+				continue;
+			if (i - pos >= SYSFS_PATH_MAX)
+				goto error_out;
+			if (current) {
+				current->next = malloc(sizeof(*current));
+				if (!current->next)
+					goto error_out;
+				current = current->next;
+			} else {
+				first = malloc(sizeof(*first));
+				if (!first)
+					goto error_out;
+				current = first;
+			}
+			current->first = first;
+			current->next = NULL;
+
+			memcpy(one_value, linebuf + pos, i - pos);
+			one_value[i - pos] = '\0';
+
+			if (sscanf(one_value, "%u", &current->cpu) != 1)
+				goto error_out;
+
+			pos = i + 1;
+		}
+	}
+
+	return first;
+
+ error_out:
+	while (first) {
+		current = first->next;
+		free(first);
+		first = current;
+	}
+	return NULL;
+}
+
+struct cpufreq_affected_cpus *sysfs_get_freq_affected_cpus(unsigned int cpu)
+{
+	return sysfs_get_cpu_list(cpu, "affected_cpus");
+}
+
+struct cpufreq_affected_cpus *sysfs_get_freq_related_cpus(unsigned int cpu)
+{
+	return sysfs_get_cpu_list(cpu, "related_cpus");
+}
+
+struct cpufreq_stats *sysfs_get_freq_stats(unsigned int cpu,
+					unsigned long long *total_time) {
+	struct cpufreq_stats *first = NULL;
+	struct cpufreq_stats *current = NULL;
+	char one_value[SYSFS_PATH_MAX];
+	char linebuf[MAX_LINE_LEN];
+	unsigned int pos, i;
+	unsigned int len;
+
+	len = sysfs_cpufreq_read_file(cpu, "stats/time_in_state",
+				linebuf, sizeof(linebuf));
+	if (len == 0)
+		return NULL;
+
+	*total_time = 0;
+	pos = 0;
+	for (i = 0; i < len; i++) {
+		if (i == strlen(linebuf) || linebuf[i] == '\n')	{
+			if (i - pos < 2)
+				continue;
+			if ((i - pos) >= SYSFS_PATH_MAX)
+				goto error_out;
+			if (current) {
+				current->next = malloc(sizeof(*current));
+				if (!current->next)
+					goto error_out;
+				current = current->next;
+			} else {
+				first = malloc(sizeof(*first));
+				if (!first)
+					goto error_out;
+				current = first;
+			}
+			current->first = first;
+			current->next = NULL;
+
+			memcpy(one_value, linebuf + pos, i - pos);
+			one_value[i - pos] = '\0';
+			if (sscanf(one_value, "%lu %llu",
+					&current->frequency,
+					&current->time_in_state) != 2)
+				goto error_out;
+
+			*total_time = *total_time + current->time_in_state;
+			pos = i + 1;
+		}
+	}
+
+	return first;
+
+ error_out:
+	while (first) {
+		current = first->next;
+		free(first);
+		first = current;
+	}
+	return NULL;
+}
+
+unsigned long sysfs_get_freq_transitions(unsigned int cpu)
+{
+	return sysfs_cpufreq_get_one_value(cpu, STATS_NUM_TRANSITIONS);
+}
+
+static int verify_gov(char *new_gov, char *passed_gov)
+{
+	unsigned int i, j = 0;
+
+	if (!passed_gov || (strlen(passed_gov) > 19))
+		return -EINVAL;
+
+	strncpy(new_gov, passed_gov, 20);
+	for (i = 0; i < 20; i++) {
+		if (j) {
+			new_gov[i] = '\0';
+			continue;
+		}
+		if ((new_gov[i] >= 'a') && (new_gov[i] <= 'z'))
+			continue;
+
+		if ((new_gov[i] >= 'A') && (new_gov[i] <= 'Z'))
+			continue;
+
+		if (new_gov[i] == '-')
+			continue;
+
+		if (new_gov[i] == '_')
+			continue;
+
+		if (new_gov[i] == '\0') {
+			j = 1;
+			continue;
+		}
+		return -EINVAL;
+	}
+	new_gov[19] = '\0';
+	return 0;
+}
+
+int sysfs_modify_freq_policy_governor(unsigned int cpu, char *governor)
+{
+	char new_gov[SYSFS_PATH_MAX];
+
+	if (!governor)
+		return -EINVAL;
+
+	if (verify_gov(new_gov, governor))
+		return -EINVAL;
+
+	return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_GOVERNOR,
+					     new_gov, strlen(new_gov));
+};
+
+int sysfs_modify_freq_policy_max(unsigned int cpu, unsigned long max_freq)
+{
+	char value[SYSFS_PATH_MAX];
+
+	snprintf(value, SYSFS_PATH_MAX, "%lu", max_freq);
+
+	return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ,
+					     value, strlen(value));
+};
+
+
+int sysfs_modify_freq_policy_min(unsigned int cpu, unsigned long min_freq)
+{
+	char value[SYSFS_PATH_MAX];
+
+	snprintf(value, SYSFS_PATH_MAX, "%lu", min_freq);
+
+	return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MIN_FREQ,
+					     value, strlen(value));
+};
+
+
+int sysfs_set_freq_policy(unsigned int cpu, struct cpufreq_policy *policy)
+{
+	char min[SYSFS_PATH_MAX];
+	char max[SYSFS_PATH_MAX];
+	char gov[SYSFS_PATH_MAX];
+	int ret;
+	unsigned long old_min;
+	int write_max_first;
+
+	if (!policy || !(policy->governor))
+		return -EINVAL;
+
+	if (policy->max < policy->min)
+		return -EINVAL;
+
+	if (verify_gov(gov, policy->governor))
+		return -EINVAL;
+
+	snprintf(min, SYSFS_PATH_MAX, "%lu", policy->min);
+	snprintf(max, SYSFS_PATH_MAX, "%lu", policy->max);
+
+	old_min = sysfs_cpufreq_get_one_value(cpu, SCALING_MIN_FREQ);
+	write_max_first = (old_min && (policy->max < old_min) ? 0 : 1);
+
+	if (write_max_first) {
+		ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ,
+						    max, strlen(max));
+		if (ret)
+			return ret;
+	}
+
+	ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MIN_FREQ, min,
+					    strlen(min));
+	if (ret)
+		return ret;
+
+	if (!write_max_first) {
+		ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ,
+						    max, strlen(max));
+		if (ret)
+			return ret;
+	}
+
+	return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_GOVERNOR,
+					     gov, strlen(gov));
+}
+
+int sysfs_set_frequency(unsigned int cpu, unsigned long target_frequency)
+{
+	struct cpufreq_policy *pol = sysfs_get_freq_policy(cpu);
+	char userspace_gov[] = "userspace";
+	char freq[SYSFS_PATH_MAX];
+	int ret;
+
+	if (!pol)
+		return -ENODEV;
+
+	if (strncmp(pol->governor, userspace_gov, 9) != 0) {
+		ret = sysfs_modify_freq_policy_governor(cpu, userspace_gov);
+		if (ret) {
+			cpufreq_put_policy(pol);
+			return ret;
+		}
+	}
+
+	cpufreq_put_policy(pol);
+
+	snprintf(freq, SYSFS_PATH_MAX, "%lu", target_frequency);
+
+	return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_SET_SPEED,
+					     freq, strlen(freq));
+}
+
+/* CPUFREQ sysfs access **************************************************/
+
+/* General sysfs access **************************************************/
+int sysfs_cpu_exists(unsigned int cpu)
+{
+	char file[SYSFS_PATH_MAX];
+	struct stat statbuf;
+
+	snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU "cpu%u/", cpu);
+
+	if (stat(file, &statbuf) != 0)
+		return -ENOSYS;
+
+	return S_ISDIR(statbuf.st_mode) ? 0 : -ENOSYS;
+}
+
+/* General sysfs access **************************************************/
diff --git a/tools/power/cpupower/lib/sysfs.h b/tools/power/cpupower/lib/sysfs.h
new file mode 100644
index 000000000000..c76a5e0af501
--- /dev/null
+++ b/tools/power/cpupower/lib/sysfs.h
@@ -0,0 +1,31 @@
+/* General */
+extern unsigned int sysfs_cpu_exists(unsigned int cpu);
+
+/* CPUfreq */
+extern unsigned long sysfs_get_freq_kernel(unsigned int cpu);
+extern unsigned long sysfs_get_freq_hardware(unsigned int cpu);
+extern unsigned long sysfs_get_freq_transition_latency(unsigned int cpu);
+extern int sysfs_get_freq_hardware_limits(unsigned int cpu,
+					unsigned long *min, unsigned long *max);
+extern char *sysfs_get_freq_driver(unsigned int cpu);
+extern struct cpufreq_policy *sysfs_get_freq_policy(unsigned int cpu);
+extern struct cpufreq_available_governors *sysfs_get_freq_available_governors(
+	unsigned int cpu);
+extern struct cpufreq_available_frequencies *sysfs_get_available_frequencies(
+	unsigned int cpu);
+extern struct cpufreq_affected_cpus *sysfs_get_freq_affected_cpus(
+	unsigned int cpu);
+extern struct cpufreq_affected_cpus *sysfs_get_freq_related_cpus(
+	unsigned int cpu);
+extern struct cpufreq_stats *sysfs_get_freq_stats(unsigned int cpu,
+						unsigned long long *total_time);
+extern unsigned long sysfs_get_freq_transitions(unsigned int cpu);
+extern int sysfs_set_freq_policy(unsigned int cpu,
+				struct cpufreq_policy *policy);
+extern int sysfs_modify_freq_policy_min(unsigned int cpu,
+					unsigned long min_freq);
+extern int sysfs_modify_freq_policy_max(unsigned int cpu,
+					unsigned long max_freq);
+extern int sysfs_modify_freq_policy_governor(unsigned int cpu, char *governor);
+extern int sysfs_set_frequency(unsigned int cpu,
+			unsigned long target_frequency);
diff --git a/tools/power/cpupower/man/cpupower-frequency-info.1 b/tools/power/cpupower/man/cpupower-frequency-info.1
new file mode 100644
index 000000000000..3194811d58f5
--- /dev/null
+++ b/tools/power/cpupower/man/cpupower-frequency-info.1
@@ -0,0 +1,76 @@
+.TH "cpufreq-info" "1" "0.1" "Mattia Dongili" ""
+.SH "NAME"
+.LP 
+cpufreq\-info \- Utility to retrieve cpufreq kernel information
+.SH "SYNTAX"
+.LP 
+cpufreq\-info [\fIoptions\fP]
+.SH "DESCRIPTION"
+.LP 
+A small tool which prints out cpufreq information helpful to developers and interested users.
+.SH "OPTIONS"
+.LP 
+.TP  
+\fB\-e\fR \fB\-\-debug\fR
+Prints out debug information.
+.TP  
+\fB\-f\fR \fB\-\-freq\fR
+Get frequency the CPU currently runs at, according to the cpufreq core.
+.TP  
+\fB\-w\fR \fB\-\-hwfreq\fR
+Get frequency the CPU currently runs at, by reading it from hardware (only available to root).
+.TP  
+\fB\-l\fR \fB\-\-hwlimits\fR
+Determine the minimum and maximum CPU frequency allowed.
+.TP  
+\fB\-d\fR \fB\-\-driver\fR
+Determines the used cpufreq kernel driver.
+.TP  
+\fB\-p\fR \fB\-\-policy\fR
+Gets the currently used cpufreq policy.
+.TP  
+\fB\-g\fR \fB\-\-governors\fR
+Determines available cpufreq governors.
+.TP  
+\fB\-a\fR \fB\-\-related\-cpus\fR
+Determines which CPUs run at the same hardware frequency.
+.TP  
+\fB\-a\fR \fB\-\-affected\-cpus\fR
+Determines which CPUs need to have their frequency coordinated by software.
+.TP  
+\fB\-s\fR \fB\-\-stats\fR
+Shows cpufreq statistics if available.
+.TP  
+\fB\-y\fR \fB\-\-latency\fR
+Determines the maximum latency on CPU frequency changes.
+.TP  
+\fB\-o\fR \fB\-\-proc\fR
+Prints out information like provided by the /proc/cpufreq interface in 2.4. and early 2.6. kernels.
+.TP  
+\fB\-m\fR \fB\-\-human\fR
+human\-readable output for the \-f, \-w, \-s and \-y parameters.
+.TP  
+\fB\-h\fR \fB\-\-help\fR
+Prints out the help screen.
+.SH "REMARKS"
+.LP 
+By default only values of core zero are displayed. How to display settings of
+other cores is described in the cpupower(1) manpage in the \-\-cpu option section.
+.LP 
+You can't specify more than one of the output specific options \-o \-e \-a \-g \-p \-d \-l \-w \-f \-y.
+.LP 
+You also can't specify the \-o option combined with the \-c option.
+.SH "FILES"
+.nf 
+\fI/sys/devices/system/cpu/cpu*/cpufreq/\fP  
+\fI/proc/cpufreq\fP (deprecated) 
+\fI/proc/sys/cpu/\fP (deprecated)
+.fi 
+.SH "AUTHORS"
+.nf
+Dominik Brodowski <linux@brodo.de> \- author 
+Mattia Dongili<malattia@gmail.com> \- first autolibtoolization
+.fi
+.SH "SEE ALSO"
+.LP 
+cpupower\-frequency\-set(1), cpupower(1)
diff --git a/tools/power/cpupower/man/cpupower-frequency-set.1 b/tools/power/cpupower/man/cpupower-frequency-set.1
new file mode 100644
index 000000000000..26e3e13eee3b
--- /dev/null
+++ b/tools/power/cpupower/man/cpupower-frequency-set.1
@@ -0,0 +1,54 @@
+.TH "cpufreq-set" "1" "0.1" "Mattia Dongili" ""
+.SH "NAME"
+.LP 
+cpufreq\-set \- A small tool which allows to modify cpufreq settings.
+.SH "SYNTAX"
+.LP 
+cpufreq\-set [\fIoptions\fP]
+.SH "DESCRIPTION"
+.LP 
+cpufreq\-set allows you to modify cpufreq settings without having to type e.g. "/sys/devices/system/cpu/cpu0/cpufreq/scaling_set_speed" all the time.
+.SH "OPTIONS"
+.LP 
+.TP 
+\fB\-d\fR \fB\-\-min\fR <FREQ>
+new minimum CPU frequency the governor may select.
+.TP 
+\fB\-u\fR \fB\-\-max\fR <FREQ>
+new maximum CPU frequency the governor may select.
+.TP 
+\fB\-g\fR \fB\-\-governor\fR <GOV>
+new cpufreq governor.
+.TP 
+\fB\-f\fR \fB\-\-freq\fR <FREQ>
+specific frequency to be set. Requires userspace governor to be available and loaded.
+.TP 
+\fB\-r\fR \fB\-\-related\fR
+modify all hardware-related CPUs at the same time
+.TP 
+\fB\-h\fR \fB\-\-help\fR
+Prints out the help screen.
+.SH "REMARKS"
+.LP 
+By default values are applied on all cores. How to modify single core
+configurations is described in the cpupower(1) manpage in the \-\-cpu option section.
+.LP 
+The \-f FREQ, \-\-freq FREQ parameter cannot be combined with any other parameter.
+.LP 
+FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz by postfixing the value with the wanted unit name, without any space (frequency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).
+.LP 
+On Linux kernels up to 2.6.29, the \-r or \-\-related parameter is ignored.
+.SH "FILES" 
+.nf
+\fI/sys/devices/system/cpu/cpu*/cpufreq/\fP  
+\fI/proc/cpufreq\fP (deprecated) 
+\fI/proc/sys/cpu/\fP (deprecated)
+.fi 
+.SH "AUTHORS"
+.nf 
+Dominik Brodowski <linux@brodo.de> \- author 
+Mattia Dongili<malattia@gmail.com> \- first autolibtoolization
+.fi
+.SH "SEE ALSO"
+.LP 
+cpupower\-frequency\-info(1), cpupower(1)
diff --git a/tools/power/cpupower/man/cpupower-info.1 b/tools/power/cpupower/man/cpupower-info.1
new file mode 100644
index 000000000000..58e21196f17f
--- /dev/null
+++ b/tools/power/cpupower/man/cpupower-info.1
@@ -0,0 +1,19 @@
+.TH CPUPOWER\-INFO "1" "22/02/2011" "" "cpupower Manual"
+.SH NAME
+cpupower\-info \- Shows processor power related kernel or hardware configurations
+.SH SYNOPSIS
+.ft B
+.B cpupower info [ \-b ] [ \-s ] [ \-m ]
+
+.SH DESCRIPTION
+\fBcpupower info \fP shows kernel configurations or processor hardware
+registers affecting processor power saving policies.
+
+Some options are platform wide, some affect single cores. By default values
+of core zero are displayed only. cpupower --cpu all cpuinfo will show the
+settings of all cores, see cpupower(1) how to choose specific cores.
+
+.SH "SEE ALSO"
+Options are described in detail in:
+
+cpupower(1), cpupower-set(1)
diff --git a/tools/power/cpupower/man/cpupower-monitor.1 b/tools/power/cpupower/man/cpupower-monitor.1
new file mode 100644
index 000000000000..d5cfa265c3d3
--- /dev/null
+++ b/tools/power/cpupower/man/cpupower-monitor.1
@@ -0,0 +1,179 @@
+.TH CPUPOWER\-MONITOR "1" "22/02/2011" "" "cpupower Manual"
+.SH NAME
+cpupower\-monitor \- Report processor frequency and idle statistics
+.SH SYNOPSIS
+.ft B
+.B cpupower monitor
+.RB "\-l"
+
+.B cpupower monitor
+.RB [ "\-m <mon1>," [ "<mon2>,..." ] ]
+.RB [ "\-i seconds" ]
+.br
+.B cpupower monitor
+.RB [ "\-m <mon1>," [ "<mon2>,..." ] ]
+.RB command
+.br
+.SH DESCRIPTION
+\fBcpupower-monitor \fP reports processor topology, frequency and idle power
+state statistics. Either \fBcommand\fP is forked and
+statistics are printed upon its completion, or statistics are printed periodically.
+
+\fBcpupower-monitor \fP implements independent processor sleep state and
+frequency counters. Some are retrieved from kernel statistics, some are
+directly reading out hardware registers. Use \-l to get an overview which are
+supported on your system.
+
+.SH Options
+.PP
+\-l
+.RS 4
+List available monitors on your system. Additional details about each monitor
+are shown:
+.RS 2
+.IP \(bu
+The name in quotation marks which can be passed to the \-m parameter.
+.IP \(bu
+The number of different counters the monitor supports in brackets.
+.IP \(bu
+The amount of time in seconds the counters might overflow, due to
+implementation constraints.
+.IP \(bu
+The name and a description of each counter and its processor hierarchy level
+coverage in square brackets:
+.RS 4
+.IP \(bu
+[T] \-> Thread
+.IP \(bu
+[C] \-> Core
+.IP \(bu
+[P] \-> Processor Package (Socket)
+.IP \(bu
+[M] \-> Machine/Platform wide counter
+.RE
+.RE
+.RE
+.PP
+\-m <mon1>,<mon2>,...
+.RS 4
+Only display specific monitors. Use the monitor string(s) provided by \-l option.
+.RE
+.PP
+\-i seconds
+.RS 4
+Measure intervall.
+.RE
+.PP
+command
+.RS 4
+Measure idle and frequency characteristics of an arbitrary command/workload.
+The executable \fBcommand\fP is forked and upon its exit, statistics gathered since it was
+forked are displayed.
+.RE
+.PP
+\-v
+.RS 4
+Increase verbosity if the binary was compiled with the DEBUG option set.
+.RE
+
+.SH MONITOR DESCRIPTIONS
+.SS "Idle_Stats"
+Shows statistics of the cpuidle kernel subsystem. Values are retrieved from
+/sys/devices/system/cpu/cpu*/cpuidle/state*/.
+The kernel updates these values every time an idle state is entered or
+left. Therefore there can be some inaccuracy when cores are in an idle
+state for some time when the measure starts or ends. In worst case it can happen
+that one core stayed in an idle state for the whole measure time and the idle
+state usage time as exported by the kernel did not get updated. In this case
+a state residency of 0 percent is shown while it was 100.
+
+.SS "Mperf"
+The name comes from the aperf/mperf (average and maximum) MSR registers used
+which are available on recent X86 processors. It shows the average frequency
+(including boost frequencies).
+The fact that on all recent hardware the mperf timer stops ticking in any idle
+state it is also used to show C0 (processor is active) and Cx (processor is in
+any sleep state) times. These counters do not have the inaccuracy restrictions
+the "Idle_Stats" counters may show.
+May work poorly on Linux-2.6.20 through 2.6.29, as the \fBacpi-cpufreq \fP
+kernel frequency driver periodically cleared aperf/mperf registers in those
+kernels.
+
+.SS "Nehalem" "SandyBridge"
+Intel Core and Package sleep state counters.
+Threads (hyperthreaded cores) may not be able to enter deeper core states if
+its sibling is utilized.
+Deepest package sleep states may in reality show up as machine/platform wide
+sleep states and can only be entered if all cores are idle. Look up Intel
+manuals (some are provided in the References section) for further details.
+
+.SS "Ontario" "Liano"
+AMD laptop and desktop processor (family 12h and 14h) sleep state counters.
+The registers are accessed via PCI and therefore can still be read out while
+cores have been offlined.
+
+There is one special counter: NBP1 (North Bridge P1).
+This one always returns 0 or 1, depending on whether the North Bridge P1
+power state got entered at least once during measure time.
+Being able to enter NBP1 state also depends on graphics power management.
+Therefore this counter can be used to verify whether the graphics' driver
+power management is working as expected.
+
+.SH EXAMPLES
+
+cpupower monitor -l" may show:
+.RS 4
+Monitor "Mperf" (3 states) \- Might overflow after 922000000 s
+
+   ...
+
+Monitor "Idle_Stats" (3 states) \- Might overflow after 4294967295 s
+
+   ...
+
+.RE
+cpupower monitor \-m "Idle_Stats,Mperf" scp /tmp/test /nfs/tmp
+
+Monitor the scp command, show both Mperf and Idle_Stats states counter
+statistics, but in exchanged order.
+
+
+
+.RE
+Be careful that the typical command to fully utilize one CPU by doing:
+
+cpupower monitor cat /dev/zero >/dev/null
+
+Does not work as expected, because the measured output is redirected to
+/dev/null. This could get workarounded by putting the line into an own, tiny
+shell script. Hit CTRL\-c to terminate the command and get the measure output
+displayed.
+
+.SH REFERENCES
+"BIOS and Kernel Developer’s Guide (BKDG) for AMD Family 14h Processors"
+http://support.amd.com/us/Processor_TechDocs/43170.pdf
+
+"Intel® Turbo Boost Technology
+in Intel® Core™ Microarchitecture (Nehalem) Based Processors"
+http://download.intel.com/design/processor/applnots/320354.pdf
+
+"Intel® 64 and IA-32 Architectures Software Developer's Manual
+Volume 3B: System Programming Guide"
+http://www.intel.com/products/processor/manuals
+
+.SH FILES
+.ta
+.nf
+/dev/cpu/*/msr
+/sys/devices/system/cpu/cpu*/cpuidle/state*/.
+.fi
+
+.SH "SEE ALSO"
+powertop(8), msr(4), vmstat(8)
+.PP
+.SH AUTHORS
+.nf
+Written by Thomas Renninger <trenn@suse.de>
+
+Nehalem, SandyBridge monitors and command passing
+based on turbostat.8 from Len Brown <len.brown@intel.com>
diff --git a/tools/power/cpupower/man/cpupower-set.1 b/tools/power/cpupower/man/cpupower-set.1
new file mode 100644
index 000000000000..c4954a9fe4e7
--- /dev/null
+++ b/tools/power/cpupower/man/cpupower-set.1
@@ -0,0 +1,103 @@
+.TH CPUPOWER\-SET "1" "22/02/2011" "" "cpupower Manual"
+.SH NAME
+cpupower\-set \- Set processor power related kernel or hardware configurations
+.SH SYNOPSIS
+.ft B
+.B cpupower set [ \-b VAL ] [ \-s VAL ] [ \-m VAL ]
+
+
+.SH DESCRIPTION
+\fBcpupower set \fP sets kernel configurations or directly accesses hardware
+registers affecting processor power saving policies.
+
+Some options are platform wide, some affect single cores. By default values
+are applied on all cores. How to modify single core configurations is
+described in the cpupower(1) manpage in the \-\-cpu option section. Whether an
+option affects the whole system or can be applied to individual cores is
+described in the Options sections.
+
+Use \fBcpupower info \fP to read out current settings and whether they are
+supported on the system at all.
+
+.SH Options
+.PP
+\-\-perf-bias, \-b
+.RS 4
+Sets a register on supported Intel processore which allows software to convey
+its policy for the relative importance of performance versus energy savings to
+the  processor.
+
+The range of valid numbers is 0-15, where 0 is maximum
+performance and 15 is maximum energy efficiency.
+
+The processor uses this information in model-specific ways
+when it must select trade-offs between performance and
+energy efficiency.
+
+This policy hint does not supersede Processor Performance states
+(P-states) or CPU Idle power states (C-states), but allows
+software to have influence where it would otherwise be unable
+to express a preference.
+
+For example, this setting may tell the hardware how
+aggressively or conservatively to control frequency
+in the "turbo range" above the explicitly OS-controlled
+P-state frequency range.  It may also tell the hardware
+how aggressively it should enter the OS requested C-states.
+
+This option can be applied to individual cores only via the \-\-cpu option,
+cpupower(1).
+
+Setting the performance bias value on one CPU can modify the setting on
+related CPUs as well (for example all CPUs on one socket), because of
+hardware restrictions.
+Use \fBcpupower -c all info -b\fP to verify.
+
+This options needs the msr kernel driver (CONFIG_X86_MSR) loaded.
+.RE
+.PP
+\-\-sched\-mc,  \-m [ VAL ]
+.RE
+\-\-sched\-smt, \-s [ VAL ]
+.RS 4
+\-\-sched\-mc utilizes cores in one processor package/socket first before
+processes are scheduled to other processor packages/sockets.
+
+\-\-sched\-smt utilizes thread siblings of one processor core first before
+processes are scheduled to other cores.
+
+The impact on power consumption and performance (positiv or negativ) heavily
+depends on processor support for deep sleep states, frequency scaling and
+frequency boost modes and their dependencies between other thread siblings
+and processor cores.
+
+Taken over from kernel documentation:
+
+Adjust the kernel's multi-core scheduler support.
+
+Possible values are:
+.RS 2
+0 - No power saving load balance (default value)
+
+1 - Fill one thread/core/package first for long running threads
+
+2 - Also bias task wakeups to semi-idle cpu package for power
+savings
+.RE
+
+sched_mc_power_savings is dependent upon SCHED_MC, which is
+itself architecture dependent.
+
+sched_smt_power_savings is dependent upon SCHED_SMT, which
+is itself architecture dependent.
+
+The two files are independent of each other. It is possible
+that one file may be present without the other.
+
+.SH "SEE ALSO"
+cpupower-info(1), cpupower-monitor(1), powertop(1)
+.PP
+.SH AUTHORS
+.nf
+\-\-perf\-bias parts written by Len Brown <len.brown@intel.com>
+Thomas Renninger <trenn@suse.de>
diff --git a/tools/power/cpupower/man/cpupower.1 b/tools/power/cpupower/man/cpupower.1
new file mode 100644
index 000000000000..78c20feab85c
--- /dev/null
+++ b/tools/power/cpupower/man/cpupower.1
@@ -0,0 +1,72 @@
+.TH CPUPOWER "1" "07/03/2011" "" "cpupower Manual"
+.SH NAME
+cpupower \- Shows and sets processor power related values
+.SH SYNOPSIS
+.ft B
+.B cpupower [ \-c cpulist ] subcommand [ARGS]
+
+.B cpupower \-v|\-\-version
+
+.B cpupower \-h|\-\-help
+
+.SH DESCRIPTION
+\fBcpupower \fP is a collection of tools to examine and tune power saving
+related features of your processor.
+
+The manpages of the subcommands (cpupower\-<subcommand>(1)) provide detailed
+descriptions of supported features. Run \fBcpupower help\fP to get an overview
+of supported subcommands.
+
+.SH Options
+.PP
+\-\-help, \-h
+.RS 4
+Shows supported subcommands and general usage.
+.RE
+.PP
+\-\-cpu cpulist,  \-c cpulist
+.RS 4
+Only show or set values for specific cores.
+This option is not supported by all subcommands, details can be found in the
+manpages of the subcommands.
+
+Some subcommands access all cores (typically the *\-set commands), some only
+the first core (typically the *\-info commands) by default.
+
+The syntax for <cpulist> is based on how the kernel exports CPU bitmasks via
+sysfs files. Some examples:
+.RS 4
+.TP 16
+Input
+Equivalent to
+.TP
+all
+all cores
+.TP
+0\-3
+0,1,2,3
+.TP
+0\-7:2
+0,2,4,6
+.TP
+1,3,5-7
+1,3,5,6,7
+.TP
+0\-3:2,8\-15:4
+0,2,8,12	
+.RE
+.RE
+.PP
+\-\-version,  \-v
+.RS 4
+Print the package name and version number.
+
+.SH "SEE ALSO"
+cpupower-set(1), cpupower-info(1), cpupower-idle(1),
+cpupower-frequency-set(1), cpupower-frequency-info(1), cpupower-monitor(1),
+powertop(1)
+.PP
+.SH AUTHORS
+.nf
+\-\-perf\-bias parts written by Len Brown <len.brown@intel.com>
+Thomas Renninger <trenn@suse.de>
diff --git a/tools/power/cpupower/po/cs.po b/tools/power/cpupower/po/cs.po
new file mode 100644
index 000000000000..cb22c45c5069
--- /dev/null
+++ b/tools/power/cpupower/po/cs.po
@@ -0,0 +1,944 @@
+# translation of cs.po to Czech
+# Czech translation for cpufrequtils package
+# Czech messages for cpufrequtils.
+# Copyright (C) 2007 kavol
+# This file is distributed under the same license as the cpufrequtils package.
+#
+# Karel Volný <kavol@seznam.cz>, 2007, 2008.
+msgid ""
+msgstr ""
+"Project-Id-Version: cs\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2011-03-08 17:03+0100\n"
+"PO-Revision-Date: 2008-06-11 16:26+0200\n"
+"Last-Translator: Karel Volný <kavol@seznam.cz>\n"
+"Language-Team: Czech <diskuze@lists.l10n.cz>\n"
+"Language: cs\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms:  nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
+"X-Generator: KBabel 1.11.4\n"
+
+#: utils/idle_monitor/nhm_idle.c:36
+msgid "Processor Core C3"
+msgstr ""
+
+#: utils/idle_monitor/nhm_idle.c:43
+msgid "Processor Core C6"
+msgstr ""
+
+#: utils/idle_monitor/nhm_idle.c:51
+msgid "Processor Package C3"
+msgstr ""
+
+#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70
+msgid "Processor Package C6"
+msgstr ""
+
+#: utils/idle_monitor/snb_idle.c:33
+msgid "Processor Core C7"
+msgstr ""
+
+#: utils/idle_monitor/snb_idle.c:40
+msgid "Processor Package C2"
+msgstr ""
+
+#: utils/idle_monitor/snb_idle.c:47
+msgid "Processor Package C7"
+msgstr ""
+
+#: utils/idle_monitor/amd_fam14h_idle.c:56
+msgid "Package in sleep state (PC1 or deeper)"
+msgstr ""
+
+#: utils/idle_monitor/amd_fam14h_idle.c:63
+msgid "Processor Package C1"
+msgstr ""
+
+#: utils/idle_monitor/amd_fam14h_idle.c:77
+msgid "North Bridge P1 boolean counter (returns 0 or 1)"
+msgstr ""
+
+#: utils/idle_monitor/mperf_monitor.c:35
+msgid "Processor Core not idle"
+msgstr ""
+
+#: utils/idle_monitor/mperf_monitor.c:42
+msgid "Processor Core in an idle state"
+msgstr ""
+
+#: utils/idle_monitor/mperf_monitor.c:50
+msgid "Average Frequency (including boost) in MHz"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:66
+#, c-format
+msgid ""
+"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
+"interval_sec | -c command ...]\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:69
+#, c-format
+msgid ""
+"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
+"interval_sec | -c command ...]\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:71
+#, c-format
+msgid "\t -v: be more verbose\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:73
+#, c-format
+msgid "\t -h: print this help\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:74
+#, c-format
+msgid "\t -i: time intervall to measure for in seconds (default 1)\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:75
+#, c-format
+msgid "\t -t: show CPU topology/hierarchy\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:76
+#, c-format
+msgid "\t -l: list available CPU sleep monitors (for use with -m)\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:77
+#, c-format
+msgid "\t -m: show specific CPU sleep monitors only (in same order)\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:79
+#, c-format
+msgid ""
+"only one of: -t, -l, -m are allowed\n"
+"If none of them is passed,"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:80
+#, c-format
+msgid " all supported monitors are shown\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:197
+#, c-format
+msgid "Monitor %s, Counter %s has no count function. Implementation error\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:207
+#, c-format
+msgid " *is offline\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:236
+#, c-format
+msgid "%s: max monitor name length (%d) exceeded\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:250
+#, c-format
+msgid "No matching monitor found in %s, try -l option\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:266
+#, c-format
+msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:319
+#, c-format
+msgid "%s took %.5f seconds and exited with status %d\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:406
+#, c-format
+msgid "Cannot read number of available processors\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:417
+#, c-format
+msgid "Available monitor %s needs root access\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:428
+#, c-format
+msgid "No HW Cstate monitors found\n"
+msgstr ""
+
+#: utils/cpupower.c:78
+#, c-format
+msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n"
+msgstr ""
+
+#: utils/cpupower.c:79
+#, c-format
+msgid "cpupower --version\n"
+msgstr ""
+
+#: utils/cpupower.c:80
+#, c-format
+msgid "Supported subcommands are:\n"
+msgstr ""
+
+#: utils/cpupower.c:83
+#, c-format
+msgid ""
+"\n"
+"Some subcommands can make use of the -c cpulist option.\n"
+msgstr ""
+
+#: utils/cpupower.c:84
+#, c-format
+msgid "Look at the general cpupower manpage how to use it\n"
+msgstr ""
+
+#: utils/cpupower.c:85
+#, c-format
+msgid "and read up the subcommand's manpage whether it is supported.\n"
+msgstr ""
+
+#: utils/cpupower.c:86
+#, c-format
+msgid ""
+"\n"
+"Use cpupower help subcommand for getting help for above subcommands.\n"
+msgstr ""
+
+#: utils/cpupower.c:91
+#, c-format
+msgid "Report errors and bugs to %s, please.\n"
+msgstr ""
+"Chyby v programu prosím hlaste na %s (anglicky).\n"
+"Chyby v překladu prosím hlaste na kavol@seznam.cz (�esky ;-)\n"
+
+#: utils/cpupower.c:114
+#, c-format
+msgid "Error parsing cpu list\n"
+msgstr ""
+
+#: utils/cpupower.c:172
+#, c-format
+msgid "Subcommand %s needs root privileges\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:31
+#, c-format
+msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n"
+msgstr "Nelze zjistit po�et CPU (%s: %s), předpokládá se 1.\n"
+
+#: utils/cpufreq-info.c:63
+#, c-format
+msgid ""
+"          minimum CPU frequency  -  maximum CPU frequency  -  governor\n"
+msgstr ""
+"         minimální frekvence CPU - maximální frekvence CPU -  regulátor\n"
+
+#: utils/cpufreq-info.c:151
+#, c-format
+msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n"
+msgstr ""
+
+#. P state changes via MSR are identified via cpuid 80000007
+#. on Intel and AMD, but we assume boost capable machines can do that
+#. if (cpuid_eax(0x80000000) >= 0x80000007
+#. && (cpuid_edx(0x80000007) & (1 << 7)))
+#.
+#: utils/cpufreq-info.c:161
+#, c-format
+msgid "  boost state support: \n"
+msgstr ""
+
+#: utils/cpufreq-info.c:163
+#, c-format
+msgid "    Supported: %s\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
+msgid "yes"
+msgstr ""
+
+#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
+msgid "no"
+msgstr ""
+
+#: utils/cpufreq-info.c:164
+#, fuzzy, c-format
+msgid "    Active: %s\n"
+msgstr "  ovlada�: %s\n"
+
+#: utils/cpufreq-info.c:177
+#, c-format
+msgid "    Boost States: %d\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:178
+#, c-format
+msgid "    Total States: %d\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:181
+#, c-format
+msgid "    Pstate-Pb%d: %luMHz (boost state)\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:184
+#, c-format
+msgid "    Pstate-P%d:  %luMHz\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:211
+#, c-format
+msgid "  no or unknown cpufreq driver is active on this CPU\n"
+msgstr "  pro tento CPU není aktivní žádný známý ovlada� cpufreq\n"
+
+#: utils/cpufreq-info.c:213
+#, c-format
+msgid "  driver: %s\n"
+msgstr "  ovlada�: %s\n"
+
+#: utils/cpufreq-info.c:219
+#, fuzzy, c-format
+msgid "  CPUs which run at the same hardware frequency: "
+msgstr "  CPU, které musí měnit frekvenci zároveň: "
+
+#: utils/cpufreq-info.c:230
+#, fuzzy, c-format
+msgid "  CPUs which need to have their frequency coordinated by software: "
+msgstr "  CPU, které musí měnit frekvenci zároveň: "
+
+#: utils/cpufreq-info.c:241
+#, c-format
+msgid "  maximum transition latency: "
+msgstr ""
+
+#: utils/cpufreq-info.c:247
+#, c-format
+msgid "  hardware limits: "
+msgstr "  hardwarové meze: "
+
+#: utils/cpufreq-info.c:256
+#, c-format
+msgid "  available frequency steps: "
+msgstr "  dostupné frekvence: "
+
+#: utils/cpufreq-info.c:269
+#, c-format
+msgid "  available cpufreq governors: "
+msgstr "  dostupné regulátory: "
+
+#: utils/cpufreq-info.c:280
+#, c-format
+msgid "  current policy: frequency should be within "
+msgstr "  sou�asná taktika: frekvence by měla být mezi "
+
+#: utils/cpufreq-info.c:282
+#, c-format
+msgid " and "
+msgstr " a "
+
+#: utils/cpufreq-info.c:286
+#, c-format
+msgid ""
+"The governor \"%s\" may decide which speed to use\n"
+"                  within this range.\n"
+msgstr ""
+"  Regulátor \"%s\" může rozhodnout jakou frekvenci použít\n"
+"                    v těchto mezích.\n"
+
+#: utils/cpufreq-info.c:293
+#, c-format
+msgid "  current CPU frequency is "
+msgstr "  sou�asná frekvence CPU je "
+
+#: utils/cpufreq-info.c:296
+#, c-format
+msgid " (asserted by call to hardware)"
+msgstr "  (zjištěno hardwarovým voláním)"
+
+#: utils/cpufreq-info.c:304
+#, c-format
+msgid "  cpufreq stats: "
+msgstr "  statistika cpufreq: "
+
+#: utils/cpufreq-info.c:472
+#, fuzzy, c-format
+msgid "Usage: cpupower freqinfo [options]\n"
+msgstr "Užití: cpufreq-info [přepína�e]\n"
+
+#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23
+#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148
+#, c-format
+msgid "Options:\n"
+msgstr "Přepína�e:\n"
+
+#: utils/cpufreq-info.c:474
+#, fuzzy, c-format
+msgid "  -e, --debug          Prints out debug information [default]\n"
+msgstr "  -e, --debug          Vypíše ladicí informace\n"
+
+#: utils/cpufreq-info.c:475
+#, c-format
+msgid ""
+"  -f, --freq           Get frequency the CPU currently runs at, according\n"
+"                       to the cpufreq core *\n"
+msgstr ""
+"  -f, --freq           Zjistí aktuální frekvenci, na které CPU běží\n"
+"                       podle cpufreq *\n"
+
+#: utils/cpufreq-info.c:477
+#, c-format
+msgid ""
+"  -w, --hwfreq         Get frequency the CPU currently runs at, by reading\n"
+"                       it from hardware (only available to root) *\n"
+msgstr ""
+"  -w, --hwfreq         Zjistí aktuální frekvenci, na které CPU běží\n"
+"                       z hardware (dostupné jen uživateli root) *\n"
+
+#: utils/cpufreq-info.c:479
+#, c-format
+msgid ""
+"  -l, --hwlimits       Determine the minimum and maximum CPU frequency "
+"allowed *\n"
+msgstr ""
+"  -l, --hwlimits       Zjistí minimální a maximální dostupnou frekvenci CPU "
+"*\n"
+
+#: utils/cpufreq-info.c:480
+#, c-format
+msgid "  -d, --driver         Determines the used cpufreq kernel driver *\n"
+msgstr "  -d, --driver         Zjistí aktivní ovlada� cpufreq *\n"
+
+#: utils/cpufreq-info.c:481
+#, c-format
+msgid "  -p, --policy         Gets the currently used cpufreq policy *\n"
+msgstr "  -p, --policy         Zjistí aktuální taktiku cpufreq *\n"
+
+#: utils/cpufreq-info.c:482
+#, c-format
+msgid "  -g, --governors      Determines available cpufreq governors *\n"
+msgstr "  -g, --governors      Zjistí dostupné regulátory cpufreq *\n"
+
+#: utils/cpufreq-info.c:483
+#, fuzzy, c-format
+msgid ""
+"  -r, --related-cpus   Determines which CPUs run at the same hardware "
+"frequency *\n"
+msgstr ""
+"  -a, --affected-cpus  Zjistí, které CPU musí měnit frekvenci zároveň *\n"
+
+#: utils/cpufreq-info.c:484
+#, fuzzy, c-format
+msgid ""
+"  -a, --affected-cpus  Determines which CPUs need to have their frequency\n"
+"                       coordinated by software *\n"
+msgstr ""
+"  -a, --affected-cpus  Zjistí, které CPU musí měnit frekvenci zároveň *\n"
+
+#: utils/cpufreq-info.c:486
+#, c-format
+msgid "  -s, --stats          Shows cpufreq statistics if available\n"
+msgstr "  -s, --stats          Zobrazí statistiku cpufreq, je-li dostupná\n"
+
+#: utils/cpufreq-info.c:487
+#, fuzzy, c-format
+msgid ""
+"  -y, --latency        Determines the maximum latency on CPU frequency "
+"changes *\n"
+msgstr ""
+"  -l, --hwlimits       Zjistí minimální a maximální dostupnou frekvenci CPU "
+"*\n"
+
+#: utils/cpufreq-info.c:488
+#, c-format
+msgid "  -b, --boost          Checks for turbo or boost modes  *\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:489
+#, c-format
+msgid ""
+"  -o, --proc           Prints out information like provided by the /proc/"
+"cpufreq\n"
+"                       interface in 2.4. and early 2.6. kernels\n"
+msgstr ""
+"  -o, --proc           Vypíše informace ve formátu, jaký používalo rozhraní\n"
+"                       /proc/cpufreq v kernelech řady 2.4 a �asné 2.6\n"
+
+#: utils/cpufreq-info.c:491
+#, fuzzy, c-format
+msgid ""
+"  -m, --human          human-readable output for the -f, -w, -s and -y "
+"parameters\n"
+msgstr ""
+"  -m, --human          Výstup parametrů -f, -w a -s v „lidmi �itelném“ "
+"formátu\n"
+
+#: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152
+#, c-format
+msgid "  -h, --help           Prints out this screen\n"
+msgstr "  -h, --help           Vypíše tuto nápovědu\n"
+
+#: utils/cpufreq-info.c:495
+#, c-format
+msgid ""
+"If no argument or only the -c, --cpu parameter is given, debug output about\n"
+"cpufreq is printed which is useful e.g. for reporting bugs.\n"
+msgstr ""
+"Není-li zadán žádný parametr nebo je-li zadán pouze přepína� -c, --cpu, "
+"jsou\n"
+"vypsány ladicí informace, což může být užite�né například při hlášení chyb.\n"
+
+#: utils/cpufreq-info.c:497
+#, c-format
+msgid ""
+"For the arguments marked with *, omitting the -c or --cpu argument is\n"
+"equivalent to setting it to zero\n"
+msgstr ""
+"Není-li při použití přepína�ů ozna�ených * zadán parametr -c nebo --cpu,\n"
+"předpokládá se jeho hodnota 0.\n"
+
+#: utils/cpufreq-info.c:580
+#, c-format
+msgid ""
+"The argument passed to this tool can't be combined with passing a --cpu "
+"argument\n"
+msgstr "Zadaný parametr nemůže být použit zároveň s přepína�em -c nebo --cpu\n"
+
+#: utils/cpufreq-info.c:596
+#, c-format
+msgid ""
+"You can't specify more than one --cpu parameter and/or\n"
+"more than one output-specific argument\n"
+msgstr ""
+"Nelze zadat více než jeden parametr -c nebo --cpu\n"
+"anebo více než jeden parametr ur�ující výstup\n"
+
+#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42
+#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213
+#, c-format
+msgid "invalid or unknown argument\n"
+msgstr "neplatný nebo neznámý parametr\n"
+
+#: utils/cpufreq-info.c:617
+#, c-format
+msgid "couldn't analyze CPU %d as it doesn't seem to be present\n"
+msgstr "nelze analyzovat CPU %d, vypadá to, že není přítomen\n"
+
+#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142
+#, c-format
+msgid "analyzing CPU %d:\n"
+msgstr "analyzuji CPU %d:\n"
+
+#: utils/cpufreq-set.c:25
+#, fuzzy, c-format
+msgid "Usage: cpupower frequency-set [options]\n"
+msgstr "Užití: cpufreq-set [přepína�e]\n"
+
+#: utils/cpufreq-set.c:27
+#, c-format
+msgid ""
+"  -d FREQ, --min FREQ      new minimum CPU frequency the governor may "
+"select\n"
+msgstr ""
+"  -d FREQ, --min FREQ      Nová nejnižší frekvence, kterou může regulátor "
+"vybrat\n"
+
+#: utils/cpufreq-set.c:28
+#, c-format
+msgid ""
+"  -u FREQ, --max FREQ      new maximum CPU frequency the governor may "
+"select\n"
+msgstr ""
+"  -u FREQ, --max FREQ      Nová nejvyšší frekvence, kterou může regulátor "
+"zvolit\n"
+
+#: utils/cpufreq-set.c:29
+#, c-format
+msgid "  -g GOV, --governor GOV   new cpufreq governor\n"
+msgstr "  -g GOV, --governors GOV  Nový regulátor cpufreq\n"
+
+#: utils/cpufreq-set.c:30
+#, c-format
+msgid ""
+"  -f FREQ, --freq FREQ     specific frequency to be set. Requires userspace\n"
+"                           governor to be available and loaded\n"
+msgstr ""
+"  -f FREQ, --freq FREQ     Frekvence, která má být nastavena. Vyžaduje, aby "
+"byl\n"
+"                           v jádře nahrán regulátor ‚userspace‘.\n"
+
+#: utils/cpufreq-set.c:32
+#, c-format
+msgid "  -r, --related            Switches all hardware-related CPUs\n"
+msgstr ""
+
+#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27
+#, fuzzy, c-format
+msgid "  -h, --help               Prints out this screen\n"
+msgstr "  -h, --help           Vypíše tuto nápovědu\n"
+
+#: utils/cpufreq-set.c:35
+#, fuzzy, c-format
+msgid ""
+"Notes:\n"
+"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n"
+msgstr ""
+"Není-li při použití přepína�ů ozna�ených * zadán parametr -c nebo --cpu,\n"
+"předpokládá se jeho hodnota 0.\n"
+
+#: utils/cpufreq-set.c:37
+#, fuzzy, c-format
+msgid ""
+"2. The -f FREQ, --freq FREQ parameter cannot be combined with any other "
+"parameter\n"
+"   except the -c CPU, --cpu CPU parameter\n"
+"3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n"
+"   by postfixing the value with the wanted unit name, without any space\n"
+"   (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n"
+msgstr ""
+"Poznámky:\n"
+"1. Vynechání parametru -c nebo --cpu je ekvivalentní jeho nastavení na 0\n"
+"2. Přepína� -f nebo --freq nemůže být použit zároveň s žádným jiným vyjma -"
+"c\n"
+"   nebo --cpu\n"
+"3. Frekvence (FREQ) mohou být zadány v Hz, kHz (výchozí), MHz, GHz nebo THz\n"
+"   připojením názvu jednotky bez mezery mezi �íslem a jednotkou\n"
+"   (FREQ v kHz =^ Hz * 0,001 = ^ MHz * 1000 =^ GHz * 1000000)\n"
+
+#: utils/cpufreq-set.c:57
+#, c-format
+msgid ""
+"Error setting new values. Common errors:\n"
+"- Do you have proper administration rights? (super-user?)\n"
+"- Is the governor you requested available and modprobed?\n"
+"- Trying to set an invalid policy?\n"
+"- Trying to set a specific frequency, but userspace governor is not "
+"available,\n"
+"   for example because of hardware which cannot be set to a specific "
+"frequency\n"
+"   or because the userspace governor isn't loaded?\n"
+msgstr ""
+"Chyba při nastavování nových hodnot. Obvyklé problémy:\n"
+"- Máte patři�ná administrátorská práva? (root?)\n"
+"- Je požadovaný regulátor dostupný v jádře? (modprobe?)\n"
+"- Snažíte se nastavit neplatnou taktiku?\n"
+"- Snažíte se nastavit ur�itou frekvenci, ale není dostupný\n"
+"  regulátor ‚userspace‘, například protože není nahrán v jádře,\n"
+"  nebo nelze na tomto hardware nastavit ur�itou frekvenci?\n"
+
+#: utils/cpufreq-set.c:170
+#, c-format
+msgid "wrong, unknown or unhandled CPU?\n"
+msgstr "neznámý nebo nepodporovaný CPU?\n"
+
+#: utils/cpufreq-set.c:302
+#, c-format
+msgid ""
+"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n"
+"-g/--governor parameters\n"
+msgstr ""
+"přepína� -f/--freq nemůže být použit zároveň\n"
+"s přepína�em -d/--min, -u/--max nebo -g/--governor\n"
+
+#: utils/cpufreq-set.c:308
+#, c-format
+msgid ""
+"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n"
+"-g/--governor must be passed\n"
+msgstr ""
+"Musí být zadán alespoň jeden přepína�\n"
+"-f/--freq, -d/--min, -u/--max nebo -g/--governor\n"
+
+#: utils/cpufreq-set.c:347
+#, c-format
+msgid "Setting cpu: %d\n"
+msgstr ""
+
+#: utils/cpupower-set.c:22
+#, c-format
+msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n"
+msgstr ""
+
+#: utils/cpupower-set.c:24
+#, c-format
+msgid ""
+"  -b, --perf-bias [VAL]    Sets CPU's power vs performance policy on some\n"
+"                           Intel models [0-15], see manpage for details\n"
+msgstr ""
+
+#: utils/cpupower-set.c:26
+#, c-format
+msgid ""
+"  -m, --sched-mc  [VAL]    Sets the kernel's multi core scheduler policy.\n"
+msgstr ""
+
+#: utils/cpupower-set.c:27
+#, c-format
+msgid ""
+"  -s, --sched-smt [VAL]    Sets the kernel's thread sibling scheduler "
+"policy.\n"
+msgstr ""
+
+#: utils/cpupower-set.c:80
+#, c-format
+msgid "--perf-bias param out of range [0-%d]\n"
+msgstr ""
+
+#: utils/cpupower-set.c:91
+#, c-format
+msgid "--sched-mc param out of range [0-%d]\n"
+msgstr ""
+
+#: utils/cpupower-set.c:102
+#, c-format
+msgid "--sched-smt param out of range [0-%d]\n"
+msgstr ""
+
+#: utils/cpupower-set.c:121
+#, c-format
+msgid "Error setting sched-mc %s\n"
+msgstr ""
+
+#: utils/cpupower-set.c:127
+#, c-format
+msgid "Error setting sched-smt %s\n"
+msgstr ""
+
+#: utils/cpupower-set.c:146
+#, c-format
+msgid "Error setting perf-bias value on CPU %d\n"
+msgstr ""
+
+#: utils/cpupower-info.c:21
+#, c-format
+msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n"
+msgstr ""
+
+#: utils/cpupower-info.c:23
+#, c-format
+msgid ""
+"  -b, --perf-bias    Gets CPU's power vs performance policy on some\n"
+"                           Intel models [0-15], see manpage for details\n"
+msgstr ""
+
+#: utils/cpupower-info.c:25
+#, fuzzy, c-format
+msgid "  -m, --sched-mc     Gets the kernel's multi core scheduler policy.\n"
+msgstr "  -p, --policy         Zjistí aktuální taktiku cpufreq *\n"
+
+#: utils/cpupower-info.c:26
+#, c-format
+msgid ""
+"  -s, --sched-smt    Gets the kernel's thread sibling scheduler policy.\n"
+msgstr ""
+
+#: utils/cpupower-info.c:28
+#, c-format
+msgid ""
+"\n"
+"Passing no option will show all info, by default only on core 0\n"
+msgstr ""
+
+#: utils/cpupower-info.c:102
+#, c-format
+msgid "System's multi core scheduler setting: "
+msgstr ""
+
+#. if sysfs file is missing it's: errno == ENOENT
+#: utils/cpupower-info.c:105 utils/cpupower-info.c:114
+#, c-format
+msgid "not supported\n"
+msgstr ""
+
+#: utils/cpupower-info.c:111
+#, c-format
+msgid "System's thread sibling scheduler setting: "
+msgstr ""
+
+#: utils/cpupower-info.c:126
+#, c-format
+msgid "Intel's performance bias setting needs root privileges\n"
+msgstr ""
+
+#: utils/cpupower-info.c:128
+#, c-format
+msgid "System does not support Intel's performance bias setting\n"
+msgstr ""
+
+#: utils/cpupower-info.c:147
+#, c-format
+msgid "Could not read perf-bias value\n"
+msgstr ""
+
+#: utils/cpupower-info.c:150
+#, c-format
+msgid "perf-bias: %d\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:28
+#, fuzzy, c-format
+msgid "Analyzing CPU %d:\n"
+msgstr "analyzuji CPU %d:\n"
+
+#: utils/cpuidle-info.c:32
+#, c-format
+msgid "CPU %u: No idle states\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:36
+#, c-format
+msgid "CPU %u: Can't read idle state info\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:41
+#, c-format
+msgid "Could not determine max idle state %u\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:46
+#, c-format
+msgid "Number of idle states: %d\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:48
+#, fuzzy, c-format
+msgid "Available idle states:"
+msgstr "  dostupné frekvence: "
+
+#: utils/cpuidle-info.c:71
+#, c-format
+msgid "Flags/Description: %s\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:74
+#, c-format
+msgid "Latency: %lu\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:76
+#, c-format
+msgid "Usage: %lu\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:78
+#, c-format
+msgid "Duration: %llu\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:90
+#, c-format
+msgid "Could not determine cpuidle driver\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:94
+#, fuzzy, c-format
+msgid "CPUidle driver: %s\n"
+msgstr "  ovlada�: %s\n"
+
+#: utils/cpuidle-info.c:99
+#, c-format
+msgid "Could not determine cpuidle governor\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:103
+#, c-format
+msgid "CPUidle governor: %s\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:122
+#, c-format
+msgid "CPU %u: Can't read C-state info\n"
+msgstr ""
+
+#. printf("Cstates: %d\n", cstates);
+#: utils/cpuidle-info.c:127
+#, c-format
+msgid "active state:            C0\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:128
+#, c-format
+msgid "max_cstate:              C%u\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:129
+#, c-format
+msgid "maximum allowed latency: %lu usec\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:130
+#, c-format
+msgid "states:\t\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:132
+#, c-format
+msgid "    C%d:                  type[C%d] "
+msgstr ""
+
+#: utils/cpuidle-info.c:134
+#, c-format
+msgid "promotion[--] demotion[--] "
+msgstr ""
+
+#: utils/cpuidle-info.c:135
+#, c-format
+msgid "latency[%03lu] "
+msgstr ""
+
+#: utils/cpuidle-info.c:137
+#, c-format
+msgid "usage[%08lu] "
+msgstr ""
+
+#: utils/cpuidle-info.c:139
+#, c-format
+msgid "duration[%020Lu] \n"
+msgstr ""
+
+#: utils/cpuidle-info.c:147
+#, fuzzy, c-format
+msgid "Usage: cpupower idleinfo [options]\n"
+msgstr "Užití: cpufreq-info [přepína�e]\n"
+
+#: utils/cpuidle-info.c:149
+#, fuzzy, c-format
+msgid "  -s, --silent         Only show general C-state information\n"
+msgstr "  -e, --debug          Vypíše ladicí informace\n"
+
+#: utils/cpuidle-info.c:150
+#, fuzzy, c-format
+msgid ""
+"  -o, --proc           Prints out information like provided by the /proc/"
+"acpi/processor/*/power\n"
+"                       interface in older kernels\n"
+msgstr ""
+"  -o, --proc           Vypíše informace ve formátu, jaký používalo rozhraní\n"
+"                       /proc/cpufreq v kernelech řady 2.4 a �asné 2.6\n"
+
+#: utils/cpuidle-info.c:209
+#, fuzzy, c-format
+msgid "You can't specify more than one output-specific argument\n"
+msgstr ""
+"Nelze zadat více než jeden parametr -c nebo --cpu\n"
+"anebo více než jeden parametr ur�ující výstup\n"
+
+#~ msgid ""
+#~ "  -c CPU, --cpu CPU    CPU number which information shall be determined "
+#~ "about\n"
+#~ msgstr ""
+#~ "  -c CPU, --cpu CPU    Číslo CPU, o kterém se mají zjistit informace\n"
+
+#~ msgid ""
+#~ "  -c CPU, --cpu CPU        number of CPU where cpufreq settings shall be "
+#~ "modified\n"
+#~ msgstr ""
+#~ "  -c CPU, --cpu CPU        Číslo CPU pro který se má provést nastavení "
+#~ "cpufreq\n"
diff --git a/tools/power/cpupower/po/de.po b/tools/power/cpupower/po/de.po
new file mode 100644
index 000000000000..78c09e51663a
--- /dev/null
+++ b/tools/power/cpupower/po/de.po
@@ -0,0 +1,961 @@
+# German translations for cpufrequtils package
+# German messages for cpufrequtils.
+# Copyright (C) 2004-2009 Dominik Brodowski <linux@dominikbrodowski.net>
+# This file is distributed under the same license as the cpufrequtils package.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: cpufrequtils 006\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2011-03-08 17:03+0100\n"
+"PO-Revision-Date: 2009-08-08 17:18+0100\n"
+"Last-Translator:  <linux@dominikbrodowski.net>\n"
+"Language-Team: NONE\n"
+"Language: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: utils/idle_monitor/nhm_idle.c:36
+msgid "Processor Core C3"
+msgstr ""
+
+#: utils/idle_monitor/nhm_idle.c:43
+msgid "Processor Core C6"
+msgstr ""
+
+#: utils/idle_monitor/nhm_idle.c:51
+msgid "Processor Package C3"
+msgstr ""
+
+#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70
+msgid "Processor Package C6"
+msgstr ""
+
+#: utils/idle_monitor/snb_idle.c:33
+msgid "Processor Core C7"
+msgstr ""
+
+#: utils/idle_monitor/snb_idle.c:40
+msgid "Processor Package C2"
+msgstr ""
+
+#: utils/idle_monitor/snb_idle.c:47
+msgid "Processor Package C7"
+msgstr ""
+
+#: utils/idle_monitor/amd_fam14h_idle.c:56
+msgid "Package in sleep state (PC1 or deeper)"
+msgstr ""
+
+#: utils/idle_monitor/amd_fam14h_idle.c:63
+msgid "Processor Package C1"
+msgstr ""
+
+#: utils/idle_monitor/amd_fam14h_idle.c:77
+msgid "North Bridge P1 boolean counter (returns 0 or 1)"
+msgstr ""
+
+#: utils/idle_monitor/mperf_monitor.c:35
+msgid "Processor Core not idle"
+msgstr ""
+
+#: utils/idle_monitor/mperf_monitor.c:42
+msgid "Processor Core in an idle state"
+msgstr ""
+
+#: utils/idle_monitor/mperf_monitor.c:50
+msgid "Average Frequency (including boost) in MHz"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:66
+#, c-format
+msgid ""
+"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
+"interval_sec | -c command ...]\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:69
+#, c-format
+msgid ""
+"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
+"interval_sec | -c command ...]\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:71
+#, c-format
+msgid "\t -v: be more verbose\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:73
+#, c-format
+msgid "\t -h: print this help\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:74
+#, c-format
+msgid "\t -i: time intervall to measure for in seconds (default 1)\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:75
+#, c-format
+msgid "\t -t: show CPU topology/hierarchy\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:76
+#, c-format
+msgid "\t -l: list available CPU sleep monitors (for use with -m)\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:77
+#, c-format
+msgid "\t -m: show specific CPU sleep monitors only (in same order)\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:79
+#, c-format
+msgid ""
+"only one of: -t, -l, -m are allowed\n"
+"If none of them is passed,"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:80
+#, c-format
+msgid " all supported monitors are shown\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:197
+#, c-format
+msgid "Monitor %s, Counter %s has no count function. Implementation error\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:207
+#, c-format
+msgid " *is offline\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:236
+#, c-format
+msgid "%s: max monitor name length (%d) exceeded\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:250
+#, c-format
+msgid "No matching monitor found in %s, try -l option\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:266
+#, c-format
+msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:319
+#, c-format
+msgid "%s took %.5f seconds and exited with status %d\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:406
+#, c-format
+msgid "Cannot read number of available processors\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:417
+#, c-format
+msgid "Available monitor %s needs root access\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:428
+#, c-format
+msgid "No HW Cstate monitors found\n"
+msgstr ""
+
+#: utils/cpupower.c:78
+#, c-format
+msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n"
+msgstr ""
+
+#: utils/cpupower.c:79
+#, c-format
+msgid "cpupower --version\n"
+msgstr ""
+
+#: utils/cpupower.c:80
+#, c-format
+msgid "Supported subcommands are:\n"
+msgstr ""
+
+#: utils/cpupower.c:83
+#, c-format
+msgid ""
+"\n"
+"Some subcommands can make use of the -c cpulist option.\n"
+msgstr ""
+
+#: utils/cpupower.c:84
+#, c-format
+msgid "Look at the general cpupower manpage how to use it\n"
+msgstr ""
+
+#: utils/cpupower.c:85
+#, c-format
+msgid "and read up the subcommand's manpage whether it is supported.\n"
+msgstr ""
+
+#: utils/cpupower.c:86
+#, c-format
+msgid ""
+"\n"
+"Use cpupower help subcommand for getting help for above subcommands.\n"
+msgstr ""
+
+#: utils/cpupower.c:91
+#, c-format
+msgid "Report errors and bugs to %s, please.\n"
+msgstr "Bitte melden Sie Fehler an %s.\n"
+
+#: utils/cpupower.c:114
+#, c-format
+msgid "Error parsing cpu list\n"
+msgstr ""
+
+#: utils/cpupower.c:172
+#, c-format
+msgid "Subcommand %s needs root privileges\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:31
+#, c-format
+msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n"
+msgstr ""
+"Konnte nicht die Anzahl der CPUs herausfinden (%s : %s), nehme daher 1 an.\n"
+
+#: utils/cpufreq-info.c:63
+#, c-format
+msgid ""
+"          minimum CPU frequency  -  maximum CPU frequency  -  governor\n"
+msgstr ""
+"          minimale CPU-Taktfreq. -  maximale CPU-Taktfreq. -  Regler  \n"
+
+#: utils/cpufreq-info.c:151
+#, c-format
+msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n"
+msgstr ""
+
+#. P state changes via MSR are identified via cpuid 80000007
+#. on Intel and AMD, but we assume boost capable machines can do that
+#. if (cpuid_eax(0x80000000) >= 0x80000007
+#. && (cpuid_edx(0x80000007) & (1 << 7)))
+#.
+#: utils/cpufreq-info.c:161
+#, c-format
+msgid "  boost state support: \n"
+msgstr ""
+
+#: utils/cpufreq-info.c:163
+#, c-format
+msgid "    Supported: %s\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
+msgid "yes"
+msgstr ""
+
+#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
+msgid "no"
+msgstr ""
+
+#: utils/cpufreq-info.c:164
+#, fuzzy, c-format
+msgid "    Active: %s\n"
+msgstr "  Treiber: %s\n"
+
+#: utils/cpufreq-info.c:177
+#, c-format
+msgid "    Boost States: %d\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:178
+#, c-format
+msgid "    Total States: %d\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:181
+#, c-format
+msgid "    Pstate-Pb%d: %luMHz (boost state)\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:184
+#, c-format
+msgid "    Pstate-P%d:  %luMHz\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:211
+#, c-format
+msgid "  no or unknown cpufreq driver is active on this CPU\n"
+msgstr "  kein oder nicht bestimmbarer cpufreq-Treiber aktiv\n"
+
+#: utils/cpufreq-info.c:213
+#, c-format
+msgid "  driver: %s\n"
+msgstr "  Treiber: %s\n"
+
+#: utils/cpufreq-info.c:219
+#, c-format
+msgid "  CPUs which run at the same hardware frequency: "
+msgstr "  Folgende CPUs laufen mit der gleichen Hardware-Taktfrequenz: "
+
+#: utils/cpufreq-info.c:230
+#, c-format
+msgid "  CPUs which need to have their frequency coordinated by software: "
+msgstr "  Die Taktfrequenz folgender CPUs werden per Software koordiniert: "
+
+#: utils/cpufreq-info.c:241
+#, c-format
+msgid "  maximum transition latency: "
+msgstr "  Maximale Dauer eines Taktfrequenzwechsels: "
+
+#: utils/cpufreq-info.c:247
+#, c-format
+msgid "  hardware limits: "
+msgstr "  Hardwarebedingte Grenzen der Taktfrequenz: "
+
+#: utils/cpufreq-info.c:256
+#, c-format
+msgid "  available frequency steps: "
+msgstr "  mögliche Taktfrequenzen: "
+
+#: utils/cpufreq-info.c:269
+#, c-format
+msgid "  available cpufreq governors: "
+msgstr "  mögliche Regler: "
+
+#: utils/cpufreq-info.c:280
+#, c-format
+msgid "  current policy: frequency should be within "
+msgstr "  momentane Taktik: die Frequenz soll innerhalb "
+
+#: utils/cpufreq-info.c:282
+#, c-format
+msgid " and "
+msgstr " und "
+
+#: utils/cpufreq-info.c:286
+#, c-format
+msgid ""
+"The governor \"%s\" may decide which speed to use\n"
+"                  within this range.\n"
+msgstr ""
+"  liegen. Der Regler \"%s\" kann frei entscheiden,\n"
+"                    welche Taktfrequenz innerhalb dieser Grenze verwendet "
+"wird.\n"
+
+#: utils/cpufreq-info.c:293
+#, c-format
+msgid "  current CPU frequency is "
+msgstr "  momentane Taktfrequenz ist "
+
+#: utils/cpufreq-info.c:296
+#, c-format
+msgid " (asserted by call to hardware)"
+msgstr "  (verifiziert durch Nachfrage bei der Hardware)"
+
+#: utils/cpufreq-info.c:304
+#, c-format
+msgid "  cpufreq stats: "
+msgstr "  Statistik:"
+
+#: utils/cpufreq-info.c:472
+#, fuzzy, c-format
+msgid "Usage: cpupower freqinfo [options]\n"
+msgstr "Aufruf: cpufreq-info [Optionen]\n"
+
+#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23
+#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148
+#, c-format
+msgid "Options:\n"
+msgstr "Optionen:\n"
+
+#: utils/cpufreq-info.c:474
+#, fuzzy, c-format
+msgid "  -e, --debug          Prints out debug information [default]\n"
+msgstr ""
+"  -e, --debug          Erzeugt detaillierte Informationen, hilfreich\n"
+"                       zum Aufspüren von Fehlern\n"
+
+#: utils/cpufreq-info.c:475
+#, c-format
+msgid ""
+"  -f, --freq           Get frequency the CPU currently runs at, according\n"
+"                       to the cpufreq core *\n"
+msgstr ""
+"  -f, --freq           Findet die momentane CPU-Taktfrquenz heraus (nach\n"
+"                       Meinung des Betriebssystems) *\n"
+
+#: utils/cpufreq-info.c:477
+#, c-format
+msgid ""
+"  -w, --hwfreq         Get frequency the CPU currently runs at, by reading\n"
+"                       it from hardware (only available to root) *\n"
+msgstr ""
+"  -w, --hwfreq         Findet die momentane CPU-Taktfrequenz heraus\n"
+"                       (verifiziert durch Nachfrage bei der Hardware)\n"
+"                       [nur der Administrator kann dies tun] *\n"
+
+#: utils/cpufreq-info.c:479
+#, c-format
+msgid ""
+"  -l, --hwlimits       Determine the minimum and maximum CPU frequency "
+"allowed *\n"
+msgstr ""
+"  -l, --hwlimits       Findet die minimale und maximale Taktfrequenz heraus "
+"*\n"
+
+#: utils/cpufreq-info.c:480
+#, c-format
+msgid "  -d, --driver         Determines the used cpufreq kernel driver *\n"
+msgstr "  -d, --driver         Findet den momentanen Treiber heraus *\n"
+
+#: utils/cpufreq-info.c:481
+#, c-format
+msgid "  -p, --policy         Gets the currently used cpufreq policy *\n"
+msgstr "  -p, --policy         Findet die momentane Taktik heraus *\n"
+
+#: utils/cpufreq-info.c:482
+#, c-format
+msgid "  -g, --governors      Determines available cpufreq governors *\n"
+msgstr "  -g, --governors      Erzeugt eine Liste mit verfügbaren Reglern *\n"
+
+#: utils/cpufreq-info.c:483
+#, c-format
+msgid ""
+"  -r, --related-cpus   Determines which CPUs run at the same hardware "
+"frequency *\n"
+msgstr ""
+"  -r, --related-cpus   Findet heraus, welche CPUs mit derselben "
+"physikalischen\n"
+"                       Taktfrequenz laufen *\n"
+
+#: utils/cpufreq-info.c:484
+#, c-format
+msgid ""
+"  -a, --affected-cpus  Determines which CPUs need to have their frequency\n"
+"                       coordinated by software *\n"
+msgstr ""
+"  -a, --affected-cpus  Findet heraus, von welchen CPUs die Taktfrequenz "
+"durch\n"
+"                       Software koordiniert werden muss *\n"
+
+#: utils/cpufreq-info.c:486
+#, c-format
+msgid "  -s, --stats          Shows cpufreq statistics if available\n"
+msgstr ""
+"  -s, --stats          Zeigt, sofern möglich, Statistiken über cpufreq an.\n"
+
+#: utils/cpufreq-info.c:487
+#, c-format
+msgid ""
+"  -y, --latency        Determines the maximum latency on CPU frequency "
+"changes *\n"
+msgstr ""
+"  -y, --latency        Findet die maximale Dauer eines Taktfrequenzwechsels "
+"heraus *\n"
+
+#: utils/cpufreq-info.c:488
+#, c-format
+msgid "  -b, --boost          Checks for turbo or boost modes  *\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:489
+#, c-format
+msgid ""
+"  -o, --proc           Prints out information like provided by the /proc/"
+"cpufreq\n"
+"                       interface in 2.4. and early 2.6. kernels\n"
+msgstr ""
+"  -o, --proc           Erzeugt Informationen in einem ähnlichem Format zu "
+"dem\n"
+"                       der /proc/cpufreq-Datei in 2.4. und frühen 2.6.\n"
+"                       Kernel-Versionen\n"
+
+#: utils/cpufreq-info.c:491
+#, c-format
+msgid ""
+"  -m, --human          human-readable output for the -f, -w, -s and -y "
+"parameters\n"
+msgstr ""
+"  -m, --human          Formatiert Taktfrequenz- und Zeitdauerangaben in "
+"besser\n"
+"                       lesbarer Form (MHz, GHz; us, ms)\n"
+
+#: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152
+#, c-format
+msgid "  -h, --help           Prints out this screen\n"
+msgstr "  -h, --help           Gibt diese Kurzübersicht aus\n"
+
+#: utils/cpufreq-info.c:495
+#, c-format
+msgid ""
+"If no argument or only the -c, --cpu parameter is given, debug output about\n"
+"cpufreq is printed which is useful e.g. for reporting bugs.\n"
+msgstr ""
+"Sofern kein anderer Parameter als '-c, --cpu' angegeben wird, liefert "
+"dieses\n"
+"Programm Informationen, die z.B. zum Berichten von Fehlern nützlich sind.\n"
+
+#: utils/cpufreq-info.c:497
+#, c-format
+msgid ""
+"For the arguments marked with *, omitting the -c or --cpu argument is\n"
+"equivalent to setting it to zero\n"
+msgstr ""
+"Bei den mit * markierten Parametern wird '--cpu 0' angenommen, soweit nicht\n"
+"mittels -c oder --cpu etwas anderes angegeben wird\n"
+
+#: utils/cpufreq-info.c:580
+#, c-format
+msgid ""
+"The argument passed to this tool can't be combined with passing a --cpu "
+"argument\n"
+msgstr "Diese Option kann nicht mit der --cpu-Option kombiniert werden\n"
+
+#: utils/cpufreq-info.c:596
+#, c-format
+msgid ""
+"You can't specify more than one --cpu parameter and/or\n"
+"more than one output-specific argument\n"
+msgstr ""
+"Man kann nicht mehr als einen --cpu-Parameter und/oder mehr als einen\n"
+"informationsspezifischen Parameter gleichzeitig angeben\n"
+
+#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42
+#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213
+#, c-format
+msgid "invalid or unknown argument\n"
+msgstr "unbekannter oder falscher Parameter\n"
+
+#: utils/cpufreq-info.c:617
+#, c-format
+msgid "couldn't analyze CPU %d as it doesn't seem to be present\n"
+msgstr ""
+"Konnte nicht die CPU %d analysieren, da sie (scheinbar?) nicht existiert.\n"
+
+#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142
+#, c-format
+msgid "analyzing CPU %d:\n"
+msgstr "analysiere CPU %d:\n"
+
+#: utils/cpufreq-set.c:25
+#, fuzzy, c-format
+msgid "Usage: cpupower frequency-set [options]\n"
+msgstr "Aufruf: cpufreq-set [Optionen]\n"
+
+#: utils/cpufreq-set.c:27
+#, c-format
+msgid ""
+"  -d FREQ, --min FREQ      new minimum CPU frequency the governor may "
+"select\n"
+msgstr ""
+"  -d FREQ, --min FREQ      neue minimale Taktfrequenz, die der Regler\n"
+"                           auswählen darf\n"
+
+#: utils/cpufreq-set.c:28
+#, c-format
+msgid ""
+"  -u FREQ, --max FREQ      new maximum CPU frequency the governor may "
+"select\n"
+msgstr ""
+"  -u FREQ, --max FREQ      neue maximale Taktfrequenz, die der Regler\n"
+"                           auswählen darf\n"
+
+#: utils/cpufreq-set.c:29
+#, c-format
+msgid "  -g GOV, --governor GOV   new cpufreq governor\n"
+msgstr "  -g GOV, --governors GOV  wechsle zu Regler GOV\n"
+
+#: utils/cpufreq-set.c:30
+#, c-format
+msgid ""
+"  -f FREQ, --freq FREQ     specific frequency to be set. Requires userspace\n"
+"                           governor to be available and loaded\n"
+msgstr ""
+"  -f FREQ, --freq FREQ     setze exakte Taktfrequenz. Benötigt den Regler\n"
+"                           'userspace'.\n"
+
+#: utils/cpufreq-set.c:32
+#, c-format
+msgid "  -r, --related            Switches all hardware-related CPUs\n"
+msgstr ""
+"  -r, --related            Setze Werte für alle CPUs, deren Taktfrequenz\n"
+"                           hardwarebedingt identisch ist.\n"
+
+#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27
+#, c-format
+msgid "  -h, --help               Prints out this screen\n"
+msgstr "  -h, --help               Gibt diese Kurzübersicht aus\n"
+
+#: utils/cpufreq-set.c:35
+#, fuzzy, c-format
+msgid ""
+"Notes:\n"
+"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n"
+msgstr ""
+"Bei den mit * markierten Parametern wird '--cpu 0' angenommen, soweit nicht\n"
+"mittels -c oder --cpu etwas anderes angegeben wird\n"
+
+#: utils/cpufreq-set.c:37
+#, fuzzy, c-format
+msgid ""
+"2. The -f FREQ, --freq FREQ parameter cannot be combined with any other "
+"parameter\n"
+"   except the -c CPU, --cpu CPU parameter\n"
+"3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n"
+"   by postfixing the value with the wanted unit name, without any space\n"
+"   (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n"
+msgstr ""
+"Hinweise:\n"
+"1. Sofern kein -c oder --cpu-Parameter angegeben ist, wird '--cpu 0'\n"
+"   angenommen\n"
+"2. Der Parameter -f bzw. --freq kann mit keinem anderen als dem Parameter\n"
+"   -c bzw. --cpu kombiniert werden\n"
+"3. FREQuenzen können in Hz, kHz (Standard), MHz, GHz oder THz eingegeben\n"
+"   werden, indem der Wert und unmittelbar anschließend (ohne Leerzeichen!)\n"
+"   die Einheit angegeben werden. (Bsp: 1GHz )\n"
+"   (FREQuenz in kHz =^ MHz * 1000 =^ GHz * 1000000).\n"
+
+#: utils/cpufreq-set.c:57
+#, c-format
+msgid ""
+"Error setting new values. Common errors:\n"
+"- Do you have proper administration rights? (super-user?)\n"
+"- Is the governor you requested available and modprobed?\n"
+"- Trying to set an invalid policy?\n"
+"- Trying to set a specific frequency, but userspace governor is not "
+"available,\n"
+"   for example because of hardware which cannot be set to a specific "
+"frequency\n"
+"   or because the userspace governor isn't loaded?\n"
+msgstr ""
+"Beim Einstellen ist ein Fehler aufgetreten. Typische Fehlerquellen sind:\n"
+"- nicht ausreichende Rechte (Administrator)\n"
+"- der Regler ist nicht verfügbar bzw. nicht geladen\n"
+"- die angegebene Taktik ist inkorrekt\n"
+"- eine spezifische Frequenz wurde angegeben, aber der Regler 'userspace'\n"
+"  kann entweder hardwarebedingt nicht genutzt werden oder ist nicht geladen\n"
+
+#: utils/cpufreq-set.c:170
+#, c-format
+msgid "wrong, unknown or unhandled CPU?\n"
+msgstr "unbekannte oder nicht regelbare CPU\n"
+
+#: utils/cpufreq-set.c:302
+#, c-format
+msgid ""
+"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n"
+"-g/--governor parameters\n"
+msgstr ""
+"Der -f bzw. --freq-Parameter kann nicht mit den Parametern -d/--min, -u/--"
+"max\n"
+"oder -g/--governor kombiniert werden\n"
+
+#: utils/cpufreq-set.c:308
+#, c-format
+msgid ""
+"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n"
+"-g/--governor must be passed\n"
+msgstr ""
+"Es muss mindestens ein Parameter aus -f/--freq, -d/--min, -u/--max oder\n"
+"-g/--governor angegeben werden.\n"
+
+#: utils/cpufreq-set.c:347
+#, c-format
+msgid "Setting cpu: %d\n"
+msgstr ""
+
+#: utils/cpupower-set.c:22
+#, c-format
+msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n"
+msgstr ""
+
+#: utils/cpupower-set.c:24
+#, c-format
+msgid ""
+"  -b, --perf-bias [VAL]    Sets CPU's power vs performance policy on some\n"
+"                           Intel models [0-15], see manpage for details\n"
+msgstr ""
+
+#: utils/cpupower-set.c:26
+#, c-format
+msgid ""
+"  -m, --sched-mc  [VAL]    Sets the kernel's multi core scheduler policy.\n"
+msgstr ""
+
+#: utils/cpupower-set.c:27
+#, c-format
+msgid ""
+"  -s, --sched-smt [VAL]    Sets the kernel's thread sibling scheduler "
+"policy.\n"
+msgstr ""
+
+#: utils/cpupower-set.c:80
+#, c-format
+msgid "--perf-bias param out of range [0-%d]\n"
+msgstr ""
+
+#: utils/cpupower-set.c:91
+#, c-format
+msgid "--sched-mc param out of range [0-%d]\n"
+msgstr ""
+
+#: utils/cpupower-set.c:102
+#, c-format
+msgid "--sched-smt param out of range [0-%d]\n"
+msgstr ""
+
+#: utils/cpupower-set.c:121
+#, c-format
+msgid "Error setting sched-mc %s\n"
+msgstr ""
+
+#: utils/cpupower-set.c:127
+#, c-format
+msgid "Error setting sched-smt %s\n"
+msgstr ""
+
+#: utils/cpupower-set.c:146
+#, c-format
+msgid "Error setting perf-bias value on CPU %d\n"
+msgstr ""
+
+#: utils/cpupower-info.c:21
+#, c-format
+msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n"
+msgstr ""
+
+#: utils/cpupower-info.c:23
+#, c-format
+msgid ""
+"  -b, --perf-bias    Gets CPU's power vs performance policy on some\n"
+"                           Intel models [0-15], see manpage for details\n"
+msgstr ""
+
+#: utils/cpupower-info.c:25
+#, fuzzy, c-format
+msgid "  -m, --sched-mc     Gets the kernel's multi core scheduler policy.\n"
+msgstr "  -p, --policy         Findet die momentane Taktik heraus *\n"
+
+#: utils/cpupower-info.c:26
+#, c-format
+msgid ""
+"  -s, --sched-smt    Gets the kernel's thread sibling scheduler policy.\n"
+msgstr ""
+
+#: utils/cpupower-info.c:28
+#, c-format
+msgid ""
+"\n"
+"Passing no option will show all info, by default only on core 0\n"
+msgstr ""
+
+#: utils/cpupower-info.c:102
+#, c-format
+msgid "System's multi core scheduler setting: "
+msgstr ""
+
+#. if sysfs file is missing it's: errno == ENOENT
+#: utils/cpupower-info.c:105 utils/cpupower-info.c:114
+#, c-format
+msgid "not supported\n"
+msgstr ""
+
+#: utils/cpupower-info.c:111
+#, c-format
+msgid "System's thread sibling scheduler setting: "
+msgstr ""
+
+#: utils/cpupower-info.c:126
+#, c-format
+msgid "Intel's performance bias setting needs root privileges\n"
+msgstr ""
+
+#: utils/cpupower-info.c:128
+#, c-format
+msgid "System does not support Intel's performance bias setting\n"
+msgstr ""
+
+#: utils/cpupower-info.c:147
+#, c-format
+msgid "Could not read perf-bias value\n"
+msgstr ""
+
+#: utils/cpupower-info.c:150
+#, c-format
+msgid "perf-bias: %d\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:28
+#, fuzzy, c-format
+msgid "Analyzing CPU %d:\n"
+msgstr "analysiere CPU %d:\n"
+
+#: utils/cpuidle-info.c:32
+#, c-format
+msgid "CPU %u: No idle states\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:36
+#, c-format
+msgid "CPU %u: Can't read idle state info\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:41
+#, c-format
+msgid "Could not determine max idle state %u\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:46
+#, c-format
+msgid "Number of idle states: %d\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:48
+#, fuzzy, c-format
+msgid "Available idle states:"
+msgstr "  mögliche Taktfrequenzen: "
+
+#: utils/cpuidle-info.c:71
+#, c-format
+msgid "Flags/Description: %s\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:74
+#, c-format
+msgid "Latency: %lu\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:76
+#, c-format
+msgid "Usage: %lu\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:78
+#, c-format
+msgid "Duration: %llu\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:90
+#, c-format
+msgid "Could not determine cpuidle driver\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:94
+#, fuzzy, c-format
+msgid "CPUidle driver: %s\n"
+msgstr "  Treiber: %s\n"
+
+#: utils/cpuidle-info.c:99
+#, c-format
+msgid "Could not determine cpuidle governor\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:103
+#, c-format
+msgid "CPUidle governor: %s\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:122
+#, c-format
+msgid "CPU %u: Can't read C-state info\n"
+msgstr ""
+
+#. printf("Cstates: %d\n", cstates);
+#: utils/cpuidle-info.c:127
+#, c-format
+msgid "active state:            C0\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:128
+#, c-format
+msgid "max_cstate:              C%u\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:129
+#, fuzzy, c-format
+msgid "maximum allowed latency: %lu usec\n"
+msgstr "  Maximale Dauer eines Taktfrequenzwechsels: "
+
+#: utils/cpuidle-info.c:130
+#, c-format
+msgid "states:\t\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:132
+#, c-format
+msgid "    C%d:                  type[C%d] "
+msgstr ""
+
+#: utils/cpuidle-info.c:134
+#, c-format
+msgid "promotion[--] demotion[--] "
+msgstr ""
+
+#: utils/cpuidle-info.c:135
+#, c-format
+msgid "latency[%03lu] "
+msgstr ""
+
+#: utils/cpuidle-info.c:137
+#, c-format
+msgid "usage[%08lu] "
+msgstr ""
+
+#: utils/cpuidle-info.c:139
+#, c-format
+msgid "duration[%020Lu] \n"
+msgstr ""
+
+#: utils/cpuidle-info.c:147
+#, fuzzy, c-format
+msgid "Usage: cpupower idleinfo [options]\n"
+msgstr "Aufruf: cpufreq-info [Optionen]\n"
+
+#: utils/cpuidle-info.c:149
+#, fuzzy, c-format
+msgid "  -s, --silent         Only show general C-state information\n"
+msgstr ""
+"  -e, --debug          Erzeugt detaillierte Informationen, hilfreich\n"
+"                       zum Aufspüren von Fehlern\n"
+
+#: utils/cpuidle-info.c:150
+#, fuzzy, c-format
+msgid ""
+"  -o, --proc           Prints out information like provided by the /proc/"
+"acpi/processor/*/power\n"
+"                       interface in older kernels\n"
+msgstr ""
+"  -o, --proc           Erzeugt Informationen in einem ähnlichem Format zu "
+"dem\n"
+"                       der /proc/cpufreq-Datei in 2.4. und frühen 2.6.\n"
+"                       Kernel-Versionen\n"
+
+#: utils/cpuidle-info.c:209
+#, fuzzy, c-format
+msgid "You can't specify more than one output-specific argument\n"
+msgstr ""
+"Man kann nicht mehr als einen --cpu-Parameter und/oder mehr als einen\n"
+"informationsspezifischen Parameter gleichzeitig angeben\n"
+
+#~ msgid ""
+#~ "  -c CPU, --cpu CPU    CPU number which information shall be determined "
+#~ "about\n"
+#~ msgstr ""
+#~ "  -c CPU, --cpu CPU    Nummer der CPU, über die Informationen "
+#~ "herausgefunden werden sollen\n"
+
+#~ msgid ""
+#~ "  -c CPU, --cpu CPU        number of CPU where cpufreq settings shall be "
+#~ "modified\n"
+#~ msgstr ""
+#~ "  -c CPU, --cpu CPU        Nummer der CPU, deren Taktfrequenz-"
+#~ "Einstellung\n"
+#~ "                           werden soll\n"
diff --git a/tools/power/cpupower/po/fr.po b/tools/power/cpupower/po/fr.po
new file mode 100644
index 000000000000..245ad20a9bf9
--- /dev/null
+++ b/tools/power/cpupower/po/fr.po
@@ -0,0 +1,947 @@
+# French translations for cpufrequtils package
+# Copyright (C) 2004 THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the cpufrequtils package.
+# Ducrot Bruno <ducrot@poupinou.org>, 2004.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: cpufrequtils 0.1-pre2\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2011-03-08 17:03+0100\n"
+"PO-Revision-Date: 2004-11-17 15:53+1000\n"
+"Last-Translator: Bruno Ducrot <ducrot@poupinou.org>\n"
+"Language-Team: NONE\n"
+"Language: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: utils/idle_monitor/nhm_idle.c:36
+msgid "Processor Core C3"
+msgstr ""
+
+#: utils/idle_monitor/nhm_idle.c:43
+msgid "Processor Core C6"
+msgstr ""
+
+#: utils/idle_monitor/nhm_idle.c:51
+msgid "Processor Package C3"
+msgstr ""
+
+#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70
+msgid "Processor Package C6"
+msgstr ""
+
+#: utils/idle_monitor/snb_idle.c:33
+msgid "Processor Core C7"
+msgstr ""
+
+#: utils/idle_monitor/snb_idle.c:40
+msgid "Processor Package C2"
+msgstr ""
+
+#: utils/idle_monitor/snb_idle.c:47
+msgid "Processor Package C7"
+msgstr ""
+
+#: utils/idle_monitor/amd_fam14h_idle.c:56
+msgid "Package in sleep state (PC1 or deeper)"
+msgstr ""
+
+#: utils/idle_monitor/amd_fam14h_idle.c:63
+msgid "Processor Package C1"
+msgstr ""
+
+#: utils/idle_monitor/amd_fam14h_idle.c:77
+msgid "North Bridge P1 boolean counter (returns 0 or 1)"
+msgstr ""
+
+#: utils/idle_monitor/mperf_monitor.c:35
+msgid "Processor Core not idle"
+msgstr ""
+
+#: utils/idle_monitor/mperf_monitor.c:42
+msgid "Processor Core in an idle state"
+msgstr ""
+
+#: utils/idle_monitor/mperf_monitor.c:50
+msgid "Average Frequency (including boost) in MHz"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:66
+#, c-format
+msgid ""
+"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
+"interval_sec | -c command ...]\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:69
+#, c-format
+msgid ""
+"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
+"interval_sec | -c command ...]\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:71
+#, c-format
+msgid "\t -v: be more verbose\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:73
+#, c-format
+msgid "\t -h: print this help\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:74
+#, c-format
+msgid "\t -i: time intervall to measure for in seconds (default 1)\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:75
+#, c-format
+msgid "\t -t: show CPU topology/hierarchy\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:76
+#, c-format
+msgid "\t -l: list available CPU sleep monitors (for use with -m)\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:77
+#, c-format
+msgid "\t -m: show specific CPU sleep monitors only (in same order)\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:79
+#, c-format
+msgid ""
+"only one of: -t, -l, -m are allowed\n"
+"If none of them is passed,"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:80
+#, c-format
+msgid " all supported monitors are shown\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:197
+#, c-format
+msgid "Monitor %s, Counter %s has no count function. Implementation error\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:207
+#, c-format
+msgid " *is offline\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:236
+#, c-format
+msgid "%s: max monitor name length (%d) exceeded\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:250
+#, c-format
+msgid "No matching monitor found in %s, try -l option\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:266
+#, c-format
+msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:319
+#, c-format
+msgid "%s took %.5f seconds and exited with status %d\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:406
+#, c-format
+msgid "Cannot read number of available processors\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:417
+#, c-format
+msgid "Available monitor %s needs root access\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:428
+#, c-format
+msgid "No HW Cstate monitors found\n"
+msgstr ""
+
+#: utils/cpupower.c:78
+#, c-format
+msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n"
+msgstr ""
+
+#: utils/cpupower.c:79
+#, c-format
+msgid "cpupower --version\n"
+msgstr ""
+
+#: utils/cpupower.c:80
+#, c-format
+msgid "Supported subcommands are:\n"
+msgstr ""
+
+#: utils/cpupower.c:83
+#, c-format
+msgid ""
+"\n"
+"Some subcommands can make use of the -c cpulist option.\n"
+msgstr ""
+
+#: utils/cpupower.c:84
+#, c-format
+msgid "Look at the general cpupower manpage how to use it\n"
+msgstr ""
+
+#: utils/cpupower.c:85
+#, c-format
+msgid "and read up the subcommand's manpage whether it is supported.\n"
+msgstr ""
+
+#: utils/cpupower.c:86
+#, c-format
+msgid ""
+"\n"
+"Use cpupower help subcommand for getting help for above subcommands.\n"
+msgstr ""
+
+#: utils/cpupower.c:91
+#, c-format
+msgid "Report errors and bugs to %s, please.\n"
+msgstr "Veuillez rapportez les erreurs et les bogues à %s, s'il vous plait.\n"
+
+#: utils/cpupower.c:114
+#, c-format
+msgid "Error parsing cpu list\n"
+msgstr ""
+
+#: utils/cpupower.c:172
+#, c-format
+msgid "Subcommand %s needs root privileges\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:31
+#, c-format
+msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n"
+msgstr "Détermination du nombre de CPUs (%s : %s) impossible.  Assume 1\n"
+
+#: utils/cpufreq-info.c:63
+#, c-format
+msgid ""
+"          minimum CPU frequency  -  maximum CPU frequency  -  governor\n"
+msgstr ""
+"         Fréquence CPU minimale - Fréquence CPU maximale  - régulateur\n"
+
+#: utils/cpufreq-info.c:151
+#, c-format
+msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n"
+msgstr ""
+
+#. P state changes via MSR are identified via cpuid 80000007
+#. on Intel and AMD, but we assume boost capable machines can do that
+#. if (cpuid_eax(0x80000000) >= 0x80000007
+#. && (cpuid_edx(0x80000007) & (1 << 7)))
+#.
+#: utils/cpufreq-info.c:161
+#, c-format
+msgid "  boost state support: \n"
+msgstr ""
+
+#: utils/cpufreq-info.c:163
+#, c-format
+msgid "    Supported: %s\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
+msgid "yes"
+msgstr ""
+
+#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
+msgid "no"
+msgstr ""
+
+#: utils/cpufreq-info.c:164
+#, fuzzy, c-format
+msgid "    Active: %s\n"
+msgstr "  pilote : %s\n"
+
+#: utils/cpufreq-info.c:177
+#, c-format
+msgid "    Boost States: %d\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:178
+#, c-format
+msgid "    Total States: %d\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:181
+#, c-format
+msgid "    Pstate-Pb%d: %luMHz (boost state)\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:184
+#, c-format
+msgid "    Pstate-P%d:  %luMHz\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:211
+#, c-format
+msgid "  no or unknown cpufreq driver is active on this CPU\n"
+msgstr "  pas de pilotes cpufreq reconnu pour ce CPU\n"
+
+#: utils/cpufreq-info.c:213
+#, c-format
+msgid "  driver: %s\n"
+msgstr "  pilote : %s\n"
+
+#: utils/cpufreq-info.c:219
+#, fuzzy, c-format
+msgid "  CPUs which run at the same hardware frequency: "
+msgstr "  CPUs qui doivent changer de fréquences en même temps : "
+
+#: utils/cpufreq-info.c:230
+#, fuzzy, c-format
+msgid "  CPUs which need to have their frequency coordinated by software: "
+msgstr "  CPUs qui doivent changer de fréquences en même temps : "
+
+#: utils/cpufreq-info.c:241
+#, c-format
+msgid "  maximum transition latency: "
+msgstr ""
+
+#: utils/cpufreq-info.c:247
+#, c-format
+msgid "  hardware limits: "
+msgstr "  limitation matérielle : "
+
+#: utils/cpufreq-info.c:256
+#, c-format
+msgid "  available frequency steps: "
+msgstr "  plage de fréquence : "
+
+#: utils/cpufreq-info.c:269
+#, c-format
+msgid "  available cpufreq governors: "
+msgstr "  régulateurs disponibles : "
+
+#: utils/cpufreq-info.c:280
+#, c-format
+msgid "  current policy: frequency should be within "
+msgstr "  tactique actuelle : la fréquence doit être comprise entre "
+
+#: utils/cpufreq-info.c:282
+#, c-format
+msgid " and "
+msgstr " et "
+
+#: utils/cpufreq-info.c:286
+#, c-format
+msgid ""
+"The governor \"%s\" may decide which speed to use\n"
+"                  within this range.\n"
+msgstr ""
+"Le régulateur \"%s\" est libre de choisir la vitesse\n"
+"                  dans cette plage de fréquences.\n"
+
+#: utils/cpufreq-info.c:293
+#, c-format
+msgid "  current CPU frequency is "
+msgstr "  la fréquence actuelle de ce CPU est "
+
+#: utils/cpufreq-info.c:296
+#, c-format
+msgid " (asserted by call to hardware)"
+msgstr " (vérifié par un appel direct du matériel)"
+
+#: utils/cpufreq-info.c:304
+#, c-format
+msgid "  cpufreq stats: "
+msgstr "  des statistique concernant cpufreq:"
+
+#: utils/cpufreq-info.c:472
+#, fuzzy, c-format
+msgid "Usage: cpupower freqinfo [options]\n"
+msgstr "Usage : cpufreq-info [options]\n"
+
+#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23
+#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148
+#, c-format
+msgid "Options:\n"
+msgstr "Options :\n"
+
+#: utils/cpufreq-info.c:474
+#, fuzzy, c-format
+msgid "  -e, --debug          Prints out debug information [default]\n"
+msgstr "  -e, --debug          Afficher les informations de déboguage\n"
+
+#: utils/cpufreq-info.c:475
+#, c-format
+msgid ""
+"  -f, --freq           Get frequency the CPU currently runs at, according\n"
+"                       to the cpufreq core *\n"
+msgstr ""
+"  -f, --freq           Obtenir la fréquence actuelle du CPU selon le point\n"
+"                       de vue du coeur du système de cpufreq *\n"
+
+#: utils/cpufreq-info.c:477
+#, c-format
+msgid ""
+"  -w, --hwfreq         Get frequency the CPU currently runs at, by reading\n"
+"                       it from hardware (only available to root) *\n"
+msgstr ""
+"  -w, --hwfreq         Obtenir la fréquence actuelle du CPU directement par\n"
+"                       le matériel (doit être root) *\n"
+
+#: utils/cpufreq-info.c:479
+#, c-format
+msgid ""
+"  -l, --hwlimits       Determine the minimum and maximum CPU frequency "
+"allowed *\n"
+msgstr ""
+"  -l, --hwlimits       Affiche les fréquences minimales et maximales du CPU "
+"*\n"
+
+#: utils/cpufreq-info.c:480
+#, c-format
+msgid "  -d, --driver         Determines the used cpufreq kernel driver *\n"
+msgstr "  -d, --driver         Affiche le pilote cpufreq utilisé *\n"
+
+#: utils/cpufreq-info.c:481
+#, c-format
+msgid "  -p, --policy         Gets the currently used cpufreq policy *\n"
+msgstr "  -p, --policy         Affiche la tactique actuelle de cpufreq *\n"
+
+#: utils/cpufreq-info.c:482
+#, c-format
+msgid "  -g, --governors      Determines available cpufreq governors *\n"
+msgstr ""
+"  -g, --governors      Affiche les régulateurs disponibles de cpufreq *\n"
+
+#: utils/cpufreq-info.c:483
+#, fuzzy, c-format
+msgid ""
+"  -r, --related-cpus   Determines which CPUs run at the same hardware "
+"frequency *\n"
+msgstr ""
+"  -a, --affected-cpus   Affiche quels sont les CPUs qui doivent changer de\n"
+"                        fréquences en même temps *\n"
+
+#: utils/cpufreq-info.c:484
+#, fuzzy, c-format
+msgid ""
+"  -a, --affected-cpus  Determines which CPUs need to have their frequency\n"
+"                       coordinated by software *\n"
+msgstr ""
+"  -a, --affected-cpus   Affiche quels sont les CPUs qui doivent changer de\n"
+"                        fréquences en même temps *\n"
+
+#: utils/cpufreq-info.c:486
+#, c-format
+msgid "  -s, --stats          Shows cpufreq statistics if available\n"
+msgstr ""
+"  -s, --stats          Indique des statistiques concernant cpufreq, si\n"
+"                       disponibles\n"
+
+#: utils/cpufreq-info.c:487
+#, fuzzy, c-format
+msgid ""
+"  -y, --latency        Determines the maximum latency on CPU frequency "
+"changes *\n"
+msgstr ""
+"  -l, --hwlimits       Affiche les fréquences minimales et maximales du CPU "
+"*\n"
+
+#: utils/cpufreq-info.c:488
+#, c-format
+msgid "  -b, --boost          Checks for turbo or boost modes  *\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:489
+#, c-format
+msgid ""
+"  -o, --proc           Prints out information like provided by the /proc/"
+"cpufreq\n"
+"                       interface in 2.4. and early 2.6. kernels\n"
+msgstr ""
+"  -o, --proc           Affiche les informations en utilisant l'interface\n"
+"                       fournie par /proc/cpufreq, présente dans les "
+"versions\n"
+"                       2.4 et les anciennes versions 2.6 du noyau\n"
+
+#: utils/cpufreq-info.c:491
+#, fuzzy, c-format
+msgid ""
+"  -m, --human          human-readable output for the -f, -w, -s and -y "
+"parameters\n"
+msgstr ""
+"  -m, --human           affiche dans un format lisible pour un humain\n"
+"                        pour les options -f, -w et -s (MHz, GHz)\n"
+
+#: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152
+#, c-format
+msgid "  -h, --help           Prints out this screen\n"
+msgstr "  -h, --help           affiche l'aide-mémoire\n"
+
+#: utils/cpufreq-info.c:495
+#, c-format
+msgid ""
+"If no argument or only the -c, --cpu parameter is given, debug output about\n"
+"cpufreq is printed which is useful e.g. for reporting bugs.\n"
+msgstr ""
+"Par défaut, les informations de déboguage seront affichées si aucun\n"
+"argument, ou bien si seulement l'argument -c (--cpu) est donné, afin de\n"
+"faciliter les rapports de bogues par exemple\n"
+
+#: utils/cpufreq-info.c:497
+#, c-format
+msgid ""
+"For the arguments marked with *, omitting the -c or --cpu argument is\n"
+"equivalent to setting it to zero\n"
+msgstr "Les arguments avec un * utiliseront le CPU 0 si -c (--cpu) est omis\n"
+
+#: utils/cpufreq-info.c:580
+#, c-format
+msgid ""
+"The argument passed to this tool can't be combined with passing a --cpu "
+"argument\n"
+msgstr "Cette option est incompatible avec --cpu\n"
+
+#: utils/cpufreq-info.c:596
+#, c-format
+msgid ""
+"You can't specify more than one --cpu parameter and/or\n"
+"more than one output-specific argument\n"
+msgstr ""
+"On ne peut indiquer plus d'un paramètre --cpu, tout comme l'on ne peut\n"
+"spécifier plus d'un argument de formatage\n"
+
+#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42
+#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213
+#, c-format
+msgid "invalid or unknown argument\n"
+msgstr "option invalide\n"
+
+#: utils/cpufreq-info.c:617
+#, c-format
+msgid "couldn't analyze CPU %d as it doesn't seem to be present\n"
+msgstr "analyse du CPU %d impossible puisqu'il ne semble pas être présent\n"
+
+#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142
+#, c-format
+msgid "analyzing CPU %d:\n"
+msgstr "analyse du CPU %d :\n"
+
+#: utils/cpufreq-set.c:25
+#, fuzzy, c-format
+msgid "Usage: cpupower frequency-set [options]\n"
+msgstr "Usage : cpufreq-set [options]\n"
+
+#: utils/cpufreq-set.c:27
+#, c-format
+msgid ""
+"  -d FREQ, --min FREQ      new minimum CPU frequency the governor may "
+"select\n"
+msgstr ""
+"  -d FREQ, --min FREQ       nouvelle fréquence minimale du CPU à utiliser\n"
+"                            par le régulateur\n"
+
+#: utils/cpufreq-set.c:28
+#, c-format
+msgid ""
+"  -u FREQ, --max FREQ      new maximum CPU frequency the governor may "
+"select\n"
+msgstr ""
+"  -u FREQ, --max FREQ       nouvelle fréquence maximale du CPU à utiliser\n"
+"                            par le régulateur\n"
+
+#: utils/cpufreq-set.c:29
+#, c-format
+msgid "  -g GOV, --governor GOV   new cpufreq governor\n"
+msgstr "  -g GOV, --governor GOV   active le régulateur GOV\n"
+
+#: utils/cpufreq-set.c:30
+#, c-format
+msgid ""
+"  -f FREQ, --freq FREQ     specific frequency to be set. Requires userspace\n"
+"                           governor to be available and loaded\n"
+msgstr ""
+"  -f FREQ, --freq FREQ     fixe la fréquence du processeur à FREQ. Il faut\n"
+"                           que le régulateur « userspace » soit disponible \n"
+"                           et activé.\n"
+
+#: utils/cpufreq-set.c:32
+#, c-format
+msgid "  -r, --related            Switches all hardware-related CPUs\n"
+msgstr ""
+
+#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27
+#, fuzzy, c-format
+msgid "  -h, --help               Prints out this screen\n"
+msgstr "  -h, --help           affiche l'aide-mémoire\n"
+
+#: utils/cpufreq-set.c:35
+#, fuzzy, c-format
+msgid ""
+"Notes:\n"
+"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n"
+msgstr "Les arguments avec un * utiliseront le CPU 0 si -c (--cpu) est omis\n"
+
+#: utils/cpufreq-set.c:37
+#, fuzzy, c-format
+msgid ""
+"2. The -f FREQ, --freq FREQ parameter cannot be combined with any other "
+"parameter\n"
+"   except the -c CPU, --cpu CPU parameter\n"
+"3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n"
+"   by postfixing the value with the wanted unit name, without any space\n"
+"   (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n"
+msgstr ""
+"Remarque :\n"
+"1. Le CPU numéro 0 sera utilisé par défaut si -c (ou --cpu) est omis ;\n"
+"2. l'argument -f FREQ (ou --freq FREQ) ne peut être utilisé qu'avec --cpu ;\n"
+"3. on pourra préciser l'unité des fréquences en postfixant sans aucune "
+"espace\n"
+"   les valeurs par hz, kHz (par défaut), MHz, GHz ou THz\n"
+"   (kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n"
+
+#: utils/cpufreq-set.c:57
+#, c-format
+msgid ""
+"Error setting new values. Common errors:\n"
+"- Do you have proper administration rights? (super-user?)\n"
+"- Is the governor you requested available and modprobed?\n"
+"- Trying to set an invalid policy?\n"
+"- Trying to set a specific frequency, but userspace governor is not "
+"available,\n"
+"   for example because of hardware which cannot be set to a specific "
+"frequency\n"
+"   or because the userspace governor isn't loaded?\n"
+msgstr ""
+"En ajustant les nouveaux paramètres, une erreur est apparue. Les sources\n"
+"d'erreur typique sont :\n"
+"- droit d'administration insuffisant (êtes-vous root ?) ;\n"
+"- le régulateur choisi n'est pas disponible, ou bien n'est pas disponible "
+"en\n"
+"  tant que module noyau ;\n"
+"- la tactique n'est pas disponible ;\n"
+"- vous voulez utiliser l'option -f/--freq, mais le régulateur « userspace »\n"
+"  n'est pas disponible, par exemple parce que le matériel ne le supporte\n"
+"  pas, ou bien n'est tout simplement pas chargé.\n"
+
+#: utils/cpufreq-set.c:170
+#, c-format
+msgid "wrong, unknown or unhandled CPU?\n"
+msgstr "CPU inconnu ou non supporté ?\n"
+
+#: utils/cpufreq-set.c:302
+#, c-format
+msgid ""
+"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n"
+"-g/--governor parameters\n"
+msgstr ""
+"l'option -f/--freq est incompatible avec les options -d/--min, -u/--max et\n"
+"-g/--governor\n"
+
+#: utils/cpufreq-set.c:308
+#, c-format
+msgid ""
+"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n"
+"-g/--governor must be passed\n"
+msgstr ""
+"L'un de ces paramètres est obligatoire : -f/--freq, -d/--min, -u/--max et\n"
+"-g/--governor\n"
+
+#: utils/cpufreq-set.c:347
+#, c-format
+msgid "Setting cpu: %d\n"
+msgstr ""
+
+#: utils/cpupower-set.c:22
+#, c-format
+msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n"
+msgstr ""
+
+#: utils/cpupower-set.c:24
+#, c-format
+msgid ""
+"  -b, --perf-bias [VAL]    Sets CPU's power vs performance policy on some\n"
+"                           Intel models [0-15], see manpage for details\n"
+msgstr ""
+
+#: utils/cpupower-set.c:26
+#, c-format
+msgid ""
+"  -m, --sched-mc  [VAL]    Sets the kernel's multi core scheduler policy.\n"
+msgstr ""
+
+#: utils/cpupower-set.c:27
+#, c-format
+msgid ""
+"  -s, --sched-smt [VAL]    Sets the kernel's thread sibling scheduler "
+"policy.\n"
+msgstr ""
+
+#: utils/cpupower-set.c:80
+#, c-format
+msgid "--perf-bias param out of range [0-%d]\n"
+msgstr ""
+
+#: utils/cpupower-set.c:91
+#, c-format
+msgid "--sched-mc param out of range [0-%d]\n"
+msgstr ""
+
+#: utils/cpupower-set.c:102
+#, c-format
+msgid "--sched-smt param out of range [0-%d]\n"
+msgstr ""
+
+#: utils/cpupower-set.c:121
+#, c-format
+msgid "Error setting sched-mc %s\n"
+msgstr ""
+
+#: utils/cpupower-set.c:127
+#, c-format
+msgid "Error setting sched-smt %s\n"
+msgstr ""
+
+#: utils/cpupower-set.c:146
+#, c-format
+msgid "Error setting perf-bias value on CPU %d\n"
+msgstr ""
+
+#: utils/cpupower-info.c:21
+#, c-format
+msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n"
+msgstr ""
+
+#: utils/cpupower-info.c:23
+#, c-format
+msgid ""
+"  -b, --perf-bias    Gets CPU's power vs performance policy on some\n"
+"                           Intel models [0-15], see manpage for details\n"
+msgstr ""
+
+#: utils/cpupower-info.c:25
+#, fuzzy, c-format
+msgid "  -m, --sched-mc     Gets the kernel's multi core scheduler policy.\n"
+msgstr "  -p, --policy         Affiche la tactique actuelle de cpufreq *\n"
+
+#: utils/cpupower-info.c:26
+#, c-format
+msgid ""
+"  -s, --sched-smt    Gets the kernel's thread sibling scheduler policy.\n"
+msgstr ""
+
+#: utils/cpupower-info.c:28
+#, c-format
+msgid ""
+"\n"
+"Passing no option will show all info, by default only on core 0\n"
+msgstr ""
+
+#: utils/cpupower-info.c:102
+#, c-format
+msgid "System's multi core scheduler setting: "
+msgstr ""
+
+#. if sysfs file is missing it's: errno == ENOENT
+#: utils/cpupower-info.c:105 utils/cpupower-info.c:114
+#, c-format
+msgid "not supported\n"
+msgstr ""
+
+#: utils/cpupower-info.c:111
+#, c-format
+msgid "System's thread sibling scheduler setting: "
+msgstr ""
+
+#: utils/cpupower-info.c:126
+#, c-format
+msgid "Intel's performance bias setting needs root privileges\n"
+msgstr ""
+
+#: utils/cpupower-info.c:128
+#, c-format
+msgid "System does not support Intel's performance bias setting\n"
+msgstr ""
+
+#: utils/cpupower-info.c:147
+#, c-format
+msgid "Could not read perf-bias value\n"
+msgstr ""
+
+#: utils/cpupower-info.c:150
+#, c-format
+msgid "perf-bias: %d\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:28
+#, fuzzy, c-format
+msgid "Analyzing CPU %d:\n"
+msgstr "analyse du CPU %d :\n"
+
+#: utils/cpuidle-info.c:32
+#, c-format
+msgid "CPU %u: No idle states\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:36
+#, c-format
+msgid "CPU %u: Can't read idle state info\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:41
+#, c-format
+msgid "Could not determine max idle state %u\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:46
+#, c-format
+msgid "Number of idle states: %d\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:48
+#, fuzzy, c-format
+msgid "Available idle states:"
+msgstr "  plage de fréquence : "
+
+#: utils/cpuidle-info.c:71
+#, c-format
+msgid "Flags/Description: %s\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:74
+#, c-format
+msgid "Latency: %lu\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:76
+#, c-format
+msgid "Usage: %lu\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:78
+#, c-format
+msgid "Duration: %llu\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:90
+#, c-format
+msgid "Could not determine cpuidle driver\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:94
+#, fuzzy, c-format
+msgid "CPUidle driver: %s\n"
+msgstr "  pilote : %s\n"
+
+#: utils/cpuidle-info.c:99
+#, c-format
+msgid "Could not determine cpuidle governor\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:103
+#, c-format
+msgid "CPUidle governor: %s\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:122
+#, c-format
+msgid "CPU %u: Can't read C-state info\n"
+msgstr ""
+
+#. printf("Cstates: %d\n", cstates);
+#: utils/cpuidle-info.c:127
+#, c-format
+msgid "active state:            C0\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:128
+#, c-format
+msgid "max_cstate:              C%u\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:129
+#, c-format
+msgid "maximum allowed latency: %lu usec\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:130
+#, c-format
+msgid "states:\t\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:132
+#, c-format
+msgid "    C%d:                  type[C%d] "
+msgstr ""
+
+#: utils/cpuidle-info.c:134
+#, c-format
+msgid "promotion[--] demotion[--] "
+msgstr ""
+
+#: utils/cpuidle-info.c:135
+#, c-format
+msgid "latency[%03lu] "
+msgstr ""
+
+#: utils/cpuidle-info.c:137
+#, c-format
+msgid "usage[%08lu] "
+msgstr ""
+
+#: utils/cpuidle-info.c:139
+#, c-format
+msgid "duration[%020Lu] \n"
+msgstr ""
+
+#: utils/cpuidle-info.c:147
+#, fuzzy, c-format
+msgid "Usage: cpupower idleinfo [options]\n"
+msgstr "Usage : cpufreq-info [options]\n"
+
+#: utils/cpuidle-info.c:149
+#, fuzzy, c-format
+msgid "  -s, --silent         Only show general C-state information\n"
+msgstr "  -e, --debug          Afficher les informations de déboguage\n"
+
+#: utils/cpuidle-info.c:150
+#, fuzzy, c-format
+msgid ""
+"  -o, --proc           Prints out information like provided by the /proc/"
+"acpi/processor/*/power\n"
+"                       interface in older kernels\n"
+msgstr ""
+"  -o, --proc           Affiche les informations en utilisant l'interface\n"
+"                       fournie par /proc/cpufreq, présente dans les "
+"versions\n"
+"                       2.4 et les anciennes versions 2.6 du noyau\n"
+
+#: utils/cpuidle-info.c:209
+#, fuzzy, c-format
+msgid "You can't specify more than one output-specific argument\n"
+msgstr ""
+"On ne peut indiquer plus d'un paramètre --cpu, tout comme l'on ne peut\n"
+"spécifier plus d'un argument de formatage\n"
+
+#~ msgid ""
+#~ "  -c CPU, --cpu CPU    CPU number which information shall be determined "
+#~ "about\n"
+#~ msgstr ""
+#~ "  -c CPU, --cpu CPU    Numéro du CPU pour lequel l'information sera "
+#~ "affichée\n"
+
+#~ msgid ""
+#~ "  -c CPU, --cpu CPU        number of CPU where cpufreq settings shall be "
+#~ "modified\n"
+#~ msgstr ""
+#~ "  -c CPU, --cpu CPU        numéro du CPU à prendre en compte pour les\n"
+#~ "                           changements\n"
diff --git a/tools/power/cpupower/po/it.po b/tools/power/cpupower/po/it.po
new file mode 100644
index 000000000000..f80c4ddb9bda
--- /dev/null
+++ b/tools/power/cpupower/po/it.po
@@ -0,0 +1,961 @@
+# Italian translations for cpufrequtils package
+# Copyright (C) 2004-2009
+# This file is distributed under the same license as the cpufrequtils package.
+# Mattia Dongili <malattia@gmail.com>.
+#
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: cpufrequtils 0.3\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2011-03-08 17:03+0100\n"
+"PO-Revision-Date: 2009-08-15 12:00+0900\n"
+"Last-Translator: Mattia Dongili <malattia@gmail.com>\n"
+"Language-Team: NONE\n"
+"Language: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: utils/idle_monitor/nhm_idle.c:36
+msgid "Processor Core C3"
+msgstr ""
+
+#: utils/idle_monitor/nhm_idle.c:43
+msgid "Processor Core C6"
+msgstr ""
+
+#: utils/idle_monitor/nhm_idle.c:51
+msgid "Processor Package C3"
+msgstr ""
+
+#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70
+msgid "Processor Package C6"
+msgstr ""
+
+#: utils/idle_monitor/snb_idle.c:33
+msgid "Processor Core C7"
+msgstr ""
+
+#: utils/idle_monitor/snb_idle.c:40
+msgid "Processor Package C2"
+msgstr ""
+
+#: utils/idle_monitor/snb_idle.c:47
+msgid "Processor Package C7"
+msgstr ""
+
+#: utils/idle_monitor/amd_fam14h_idle.c:56
+msgid "Package in sleep state (PC1 or deeper)"
+msgstr ""
+
+#: utils/idle_monitor/amd_fam14h_idle.c:63
+msgid "Processor Package C1"
+msgstr ""
+
+#: utils/idle_monitor/amd_fam14h_idle.c:77
+msgid "North Bridge P1 boolean counter (returns 0 or 1)"
+msgstr ""
+
+#: utils/idle_monitor/mperf_monitor.c:35
+msgid "Processor Core not idle"
+msgstr ""
+
+#: utils/idle_monitor/mperf_monitor.c:42
+msgid "Processor Core in an idle state"
+msgstr ""
+
+#: utils/idle_monitor/mperf_monitor.c:50
+msgid "Average Frequency (including boost) in MHz"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:66
+#, c-format
+msgid ""
+"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
+"interval_sec | -c command ...]\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:69
+#, c-format
+msgid ""
+"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
+"interval_sec | -c command ...]\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:71
+#, c-format
+msgid "\t -v: be more verbose\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:73
+#, c-format
+msgid "\t -h: print this help\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:74
+#, c-format
+msgid "\t -i: time intervall to measure for in seconds (default 1)\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:75
+#, c-format
+msgid "\t -t: show CPU topology/hierarchy\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:76
+#, c-format
+msgid "\t -l: list available CPU sleep monitors (for use with -m)\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:77
+#, c-format
+msgid "\t -m: show specific CPU sleep monitors only (in same order)\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:79
+#, c-format
+msgid ""
+"only one of: -t, -l, -m are allowed\n"
+"If none of them is passed,"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:80
+#, c-format
+msgid " all supported monitors are shown\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:197
+#, c-format
+msgid "Monitor %s, Counter %s has no count function. Implementation error\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:207
+#, c-format
+msgid " *is offline\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:236
+#, c-format
+msgid "%s: max monitor name length (%d) exceeded\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:250
+#, c-format
+msgid "No matching monitor found in %s, try -l option\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:266
+#, c-format
+msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:319
+#, c-format
+msgid "%s took %.5f seconds and exited with status %d\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:406
+#, c-format
+msgid "Cannot read number of available processors\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:417
+#, c-format
+msgid "Available monitor %s needs root access\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:428
+#, c-format
+msgid "No HW Cstate monitors found\n"
+msgstr ""
+
+#: utils/cpupower.c:78
+#, c-format
+msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n"
+msgstr ""
+
+#: utils/cpupower.c:79
+#, c-format
+msgid "cpupower --version\n"
+msgstr ""
+
+#: utils/cpupower.c:80
+#, c-format
+msgid "Supported subcommands are:\n"
+msgstr ""
+
+#: utils/cpupower.c:83
+#, c-format
+msgid ""
+"\n"
+"Some subcommands can make use of the -c cpulist option.\n"
+msgstr ""
+
+#: utils/cpupower.c:84
+#, c-format
+msgid "Look at the general cpupower manpage how to use it\n"
+msgstr ""
+
+#: utils/cpupower.c:85
+#, c-format
+msgid "and read up the subcommand's manpage whether it is supported.\n"
+msgstr ""
+
+#: utils/cpupower.c:86
+#, c-format
+msgid ""
+"\n"
+"Use cpupower help subcommand for getting help for above subcommands.\n"
+msgstr ""
+
+#: utils/cpupower.c:91
+#, c-format
+msgid "Report errors and bugs to %s, please.\n"
+msgstr "Per favore, comunicare errori e malfunzionamenti a %s.\n"
+
+#: utils/cpupower.c:114
+#, c-format
+msgid "Error parsing cpu list\n"
+msgstr ""
+
+#: utils/cpupower.c:172
+#, c-format
+msgid "Subcommand %s needs root privileges\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:31
+#, c-format
+msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n"
+msgstr "Impossibile determinare il numero di CPU (%s: %s), assumo sia 1\n"
+
+#: utils/cpufreq-info.c:63
+#, c-format
+msgid ""
+"          minimum CPU frequency  -  maximum CPU frequency  -  governor\n"
+msgstr ""
+"          frequenza minima CPU   -  frequenza massima CPU  -  gestore\n"
+
+#: utils/cpufreq-info.c:151
+#, c-format
+msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n"
+msgstr ""
+
+#. P state changes via MSR are identified via cpuid 80000007
+#. on Intel and AMD, but we assume boost capable machines can do that
+#. if (cpuid_eax(0x80000000) >= 0x80000007
+#. && (cpuid_edx(0x80000007) & (1 << 7)))
+#.
+#: utils/cpufreq-info.c:161
+#, c-format
+msgid "  boost state support: \n"
+msgstr ""
+
+#: utils/cpufreq-info.c:163
+#, c-format
+msgid "    Supported: %s\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
+msgid "yes"
+msgstr ""
+
+#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
+msgid "no"
+msgstr ""
+
+#: utils/cpufreq-info.c:164
+#, fuzzy, c-format
+msgid "    Active: %s\n"
+msgstr "  modulo %s\n"
+
+#: utils/cpufreq-info.c:177
+#, c-format
+msgid "    Boost States: %d\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:178
+#, c-format
+msgid "    Total States: %d\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:181
+#, c-format
+msgid "    Pstate-Pb%d: %luMHz (boost state)\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:184
+#, c-format
+msgid "    Pstate-P%d:  %luMHz\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:211
+#, c-format
+msgid "  no or unknown cpufreq driver is active on this CPU\n"
+msgstr "  nessun modulo o modulo cpufreq sconosciuto per questa CPU\n"
+
+#: utils/cpufreq-info.c:213
+#, c-format
+msgid "  driver: %s\n"
+msgstr "  modulo %s\n"
+
+#: utils/cpufreq-info.c:219
+#, c-format
+msgid "  CPUs which run at the same hardware frequency: "
+msgstr "  CPU che operano alla stessa frequenza hardware: "
+
+#: utils/cpufreq-info.c:230
+#, c-format
+msgid "  CPUs which need to have their frequency coordinated by software: "
+msgstr "  CPU che è necessario siano coordinate dal software: "
+
+#: utils/cpufreq-info.c:241
+#, c-format
+msgid "  maximum transition latency: "
+msgstr "  latenza massima durante la transizione: "
+
+#: utils/cpufreq-info.c:247
+#, c-format
+msgid "  hardware limits: "
+msgstr "  limiti hardware: "
+
+#: utils/cpufreq-info.c:256
+#, c-format
+msgid "  available frequency steps: "
+msgstr "  frequenze disponibili: "
+
+#: utils/cpufreq-info.c:269
+#, c-format
+msgid "  available cpufreq governors: "
+msgstr "  gestori disponibili: "
+
+#: utils/cpufreq-info.c:280
+#, c-format
+msgid "  current policy: frequency should be within "
+msgstr "  gestore attuale: la frequenza deve mantenersi tra "
+
+#: utils/cpufreq-info.c:282
+#, c-format
+msgid " and "
+msgstr " e "
+
+#: utils/cpufreq-info.c:286
+#, c-format
+msgid ""
+"The governor \"%s\" may decide which speed to use\n"
+"                  within this range.\n"
+msgstr ""
+" Il gestore \"%s\" può decidere quale velocità usare\n"
+"                  in questo intervallo.\n"
+
+#: utils/cpufreq-info.c:293
+#, c-format
+msgid "  current CPU frequency is "
+msgstr "  la frequenza attuale della CPU è "
+
+#: utils/cpufreq-info.c:296
+#, c-format
+msgid " (asserted by call to hardware)"
+msgstr " (ottenuta da una chiamata diretta all'hardware)"
+
+#: utils/cpufreq-info.c:304
+#, c-format
+msgid "  cpufreq stats: "
+msgstr " statistiche cpufreq:"
+
+#: utils/cpufreq-info.c:472
+#, fuzzy, c-format
+msgid "Usage: cpupower freqinfo [options]\n"
+msgstr "Uso: cpufreq-info [opzioni]\n"
+
+#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23
+#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148
+#, c-format
+msgid "Options:\n"
+msgstr "Opzioni:\n"
+
+#: utils/cpufreq-info.c:474
+#, fuzzy, c-format
+msgid "  -e, --debug          Prints out debug information [default]\n"
+msgstr "  -e, --debug          Mostra informazioni di debug\n"
+
+#: utils/cpufreq-info.c:475
+#, c-format
+msgid ""
+"  -f, --freq           Get frequency the CPU currently runs at, according\n"
+"                       to the cpufreq core *\n"
+msgstr ""
+"  -f, --freq           Mostra la frequenza attuale della CPU secondo\n"
+"                       il modulo cpufreq *\n"
+
+#: utils/cpufreq-info.c:477
+#, c-format
+msgid ""
+"  -w, --hwfreq         Get frequency the CPU currently runs at, by reading\n"
+"                       it from hardware (only available to root) *\n"
+msgstr ""
+"  -w, --hwfreq         Mostra la frequenza attuale della CPU leggendola\n"
+"                       dall'hardware (disponibile solo per l'utente root) *\n"
+
+#: utils/cpufreq-info.c:479
+#, c-format
+msgid ""
+"  -l, --hwlimits       Determine the minimum and maximum CPU frequency "
+"allowed *\n"
+msgstr ""
+"  -l, --hwlimits       Determina le frequenze minima e massima possibili per "
+"la CPU *\n"
+
+#: utils/cpufreq-info.c:480
+#, c-format
+msgid "  -d, --driver         Determines the used cpufreq kernel driver *\n"
+msgstr ""
+"  -d, --driver         Determina il modulo cpufreq del kernel in uso *\n"
+
+#: utils/cpufreq-info.c:481
+#, c-format
+msgid "  -p, --policy         Gets the currently used cpufreq policy *\n"
+msgstr ""
+"  -p, --policy         Mostra il gestore cpufreq attualmente in uso *\n"
+
+#: utils/cpufreq-info.c:482
+#, c-format
+msgid "  -g, --governors      Determines available cpufreq governors *\n"
+msgstr "  -g, --governors      Determina i gestori cpufreq disponibili *\n"
+
+#: utils/cpufreq-info.c:483
+#, c-format
+msgid ""
+"  -r, --related-cpus   Determines which CPUs run at the same hardware "
+"frequency *\n"
+msgstr ""
+"  -r, --related-cpus   Determina quali CPU operano alla stessa frequenza *\n"
+
+#: utils/cpufreq-info.c:484
+#, c-format
+msgid ""
+"  -a, --affected-cpus  Determines which CPUs need to have their frequency\n"
+"                       coordinated by software *\n"
+msgstr ""
+"  -a, --affected-cpus  Determina quali CPU devono avere la frequenza\n"
+"                       coordinata dal software *\n"
+
+#: utils/cpufreq-info.c:486
+#, c-format
+msgid "  -s, --stats          Shows cpufreq statistics if available\n"
+msgstr "  -s, --stats          Mostra le statistiche se disponibili\n"
+
+#: utils/cpufreq-info.c:487
+#, c-format
+msgid ""
+"  -y, --latency        Determines the maximum latency on CPU frequency "
+"changes *\n"
+msgstr ""
+"  -y, --latency        Determina la latenza massima durante i cambi di "
+"frequenza *\n"
+
+#: utils/cpufreq-info.c:488
+#, c-format
+msgid "  -b, --boost          Checks for turbo or boost modes  *\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:489
+#, c-format
+msgid ""
+"  -o, --proc           Prints out information like provided by the /proc/"
+"cpufreq\n"
+"                       interface in 2.4. and early 2.6. kernels\n"
+msgstr ""
+"  -o, --proc           Stampa le informazioni come se provenissero dalla\n"
+"                       interfaccia cpufreq /proc/ presente nei kernel\n"
+"                       2.4 ed i primi 2.6\n"
+
+#: utils/cpufreq-info.c:491
+#, c-format
+msgid ""
+"  -m, --human          human-readable output for the -f, -w, -s and -y "
+"parameters\n"
+msgstr ""
+"  -m, --human          formatta l'output delle opzioni -f, -w, -s e -y in "
+"maniera\n"
+"                       leggibile da un essere umano\n"
+
+#: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152
+#, c-format
+msgid "  -h, --help           Prints out this screen\n"
+msgstr "  -h, --help           Stampa questa schermata\n"
+
+#: utils/cpufreq-info.c:495
+#, c-format
+msgid ""
+"If no argument or only the -c, --cpu parameter is given, debug output about\n"
+"cpufreq is printed which is useful e.g. for reporting bugs.\n"
+msgstr ""
+"Se non viene specificata nessuna opzione o viene specificata solo l'opzione -"
+"c, --cpu,\n"
+"le informazioni di debug per cpufreq saranno utili ad esempio a riportare i "
+"bug.\n"
+
+#: utils/cpufreq-info.c:497
+#, c-format
+msgid ""
+"For the arguments marked with *, omitting the -c or --cpu argument is\n"
+"equivalent to setting it to zero\n"
+msgstr ""
+"Per le opzioni segnalate con *, omettere l'opzione -c o --cpu è come "
+"specificarla\n"
+"con il valore 0\n"
+
+#: utils/cpufreq-info.c:580
+#, c-format
+msgid ""
+"The argument passed to this tool can't be combined with passing a --cpu "
+"argument\n"
+msgstr ""
+"L'opzione specificata a questo programma non può essere combinata con --cpu\n"
+
+#: utils/cpufreq-info.c:596
+#, c-format
+msgid ""
+"You can't specify more than one --cpu parameter and/or\n"
+"more than one output-specific argument\n"
+msgstr ""
+"Non è possibile specificare più di una volta l'opzione --cpu e/o\n"
+"specificare più di un parametro di output specifico\n"
+
+#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42
+#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213
+#, c-format
+msgid "invalid or unknown argument\n"
+msgstr "opzione sconosciuta o non valida\n"
+
+#: utils/cpufreq-info.c:617
+#, c-format
+msgid "couldn't analyze CPU %d as it doesn't seem to be present\n"
+msgstr "impossibile analizzare la CPU %d poiché non sembra essere presente\n"
+
+#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142
+#, c-format
+msgid "analyzing CPU %d:\n"
+msgstr "analisi della CPU %d:\n"
+
+#: utils/cpufreq-set.c:25
+#, fuzzy, c-format
+msgid "Usage: cpupower frequency-set [options]\n"
+msgstr "Uso: cpufreq-set [opzioni]\n"
+
+#: utils/cpufreq-set.c:27
+#, c-format
+msgid ""
+"  -d FREQ, --min FREQ      new minimum CPU frequency the governor may "
+"select\n"
+msgstr ""
+"  -d FREQ, --min FREQ      la nuova frequenza minima che il gestore cpufreq "
+"può scegliere\n"
+
+#: utils/cpufreq-set.c:28
+#, c-format
+msgid ""
+"  -u FREQ, --max FREQ      new maximum CPU frequency the governor may "
+"select\n"
+msgstr ""
+"  -u FREQ, --max FREQ      la nuova frequenza massima che il gestore cpufreq "
+"può scegliere\n"
+
+#: utils/cpufreq-set.c:29
+#, c-format
+msgid "  -g GOV, --governor GOV   new cpufreq governor\n"
+msgstr "  -g GOV, --governor GOV   nuovo gestore cpufreq\n"
+
+#: utils/cpufreq-set.c:30
+#, c-format
+msgid ""
+"  -f FREQ, --freq FREQ     specific frequency to be set. Requires userspace\n"
+"                           governor to be available and loaded\n"
+msgstr ""
+"  -f FREQ, --freq FREQ     specifica la frequenza a cui impostare la CPU.\n"
+"                           È necessario che il gestore userspace sia "
+"disponibile e caricato\n"
+
+#: utils/cpufreq-set.c:32
+#, c-format
+msgid "  -r, --related            Switches all hardware-related CPUs\n"
+msgstr ""
+"  -r, --related            Modifica tutte le CPU coordinate dall'hardware\n"
+
+#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27
+#, c-format
+msgid "  -h, --help               Prints out this screen\n"
+msgstr "  -h, --help               Stampa questa schermata\n"
+
+#: utils/cpufreq-set.c:35
+#, fuzzy, c-format
+msgid ""
+"Notes:\n"
+"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n"
+msgstr ""
+"Per le opzioni segnalate con *, omettere l'opzione -c o --cpu è come "
+"specificarla\n"
+"con il valore 0\n"
+
+#: utils/cpufreq-set.c:37
+#, fuzzy, c-format
+msgid ""
+"2. The -f FREQ, --freq FREQ parameter cannot be combined with any other "
+"parameter\n"
+"   except the -c CPU, --cpu CPU parameter\n"
+"3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n"
+"   by postfixing the value with the wanted unit name, without any space\n"
+"   (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n"
+msgstr ""
+"Note:\n"
+"1. Omettere l'opzione -c o --cpu è equivalente a impostarlo a 0\n"
+"2. l'opzione -f FREQ, --freq FREQ non può essere specificata con altre "
+"opzioni\n"
+"   ad eccezione dell'opzione -c CPU o --cpu CPU\n"
+"3. le FREQuenze possono essere specuficate in  Hz, kHz (default), MHz, GHz, "
+"or THz\n"
+"   postponendo l'unità di misura al valore senza nessuno spazio fra loro\n"
+"   (FREQuenza in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n"
+
+#: utils/cpufreq-set.c:57
+#, c-format
+msgid ""
+"Error setting new values. Common errors:\n"
+"- Do you have proper administration rights? (super-user?)\n"
+"- Is the governor you requested available and modprobed?\n"
+"- Trying to set an invalid policy?\n"
+"- Trying to set a specific frequency, but userspace governor is not "
+"available,\n"
+"   for example because of hardware which cannot be set to a specific "
+"frequency\n"
+"   or because the userspace governor isn't loaded?\n"
+msgstr ""
+"Si sono verificati degli errori impostando i nuovi valori.\n"
+"Alcuni errori comuni possono essere:\n"
+"- Hai i necessari diritti di amministrazione? (super-user?)\n"
+"- Il gestore che hai richiesto è disponibile e caricato?\n"
+"- Stai provando ad impostare una politica di gestione non valida?\n"
+"- Stai provando a impostare una specifica frequenza ma il gestore\n"
+"  userspace non è disponibile, per esempio a causa dell'hardware\n"
+"  che non supporta frequenze fisse o a causa del fatto che\n"
+"  il gestore userspace non è caricato?\n"
+
+#: utils/cpufreq-set.c:170
+#, c-format
+msgid "wrong, unknown or unhandled CPU?\n"
+msgstr "CPU errata, sconosciuta o non gestita?\n"
+
+#: utils/cpufreq-set.c:302
+#, c-format
+msgid ""
+"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n"
+"-g/--governor parameters\n"
+msgstr ""
+"l'opzione -f/--freq non può venire combinata con i parametri\n"
+" -d/--min, -u/--max o -g/--governor\n"
+
+#: utils/cpufreq-set.c:308
+#, c-format
+msgid ""
+"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n"
+"-g/--governor must be passed\n"
+msgstr ""
+"Almeno una delle opzioni -f/--freq, -d/--min, -u/--max, e -g/--governor\n"
+"deve essere specificata\n"
+
+#: utils/cpufreq-set.c:347
+#, c-format
+msgid "Setting cpu: %d\n"
+msgstr ""
+
+#: utils/cpupower-set.c:22
+#, c-format
+msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n"
+msgstr ""
+
+#: utils/cpupower-set.c:24
+#, c-format
+msgid ""
+"  -b, --perf-bias [VAL]    Sets CPU's power vs performance policy on some\n"
+"                           Intel models [0-15], see manpage for details\n"
+msgstr ""
+
+#: utils/cpupower-set.c:26
+#, c-format
+msgid ""
+"  -m, --sched-mc  [VAL]    Sets the kernel's multi core scheduler policy.\n"
+msgstr ""
+
+#: utils/cpupower-set.c:27
+#, c-format
+msgid ""
+"  -s, --sched-smt [VAL]    Sets the kernel's thread sibling scheduler "
+"policy.\n"
+msgstr ""
+
+#: utils/cpupower-set.c:80
+#, c-format
+msgid "--perf-bias param out of range [0-%d]\n"
+msgstr ""
+
+#: utils/cpupower-set.c:91
+#, c-format
+msgid "--sched-mc param out of range [0-%d]\n"
+msgstr ""
+
+#: utils/cpupower-set.c:102
+#, c-format
+msgid "--sched-smt param out of range [0-%d]\n"
+msgstr ""
+
+#: utils/cpupower-set.c:121
+#, c-format
+msgid "Error setting sched-mc %s\n"
+msgstr ""
+
+#: utils/cpupower-set.c:127
+#, c-format
+msgid "Error setting sched-smt %s\n"
+msgstr ""
+
+#: utils/cpupower-set.c:146
+#, c-format
+msgid "Error setting perf-bias value on CPU %d\n"
+msgstr ""
+
+#: utils/cpupower-info.c:21
+#, c-format
+msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n"
+msgstr ""
+
+#: utils/cpupower-info.c:23
+#, c-format
+msgid ""
+"  -b, --perf-bias    Gets CPU's power vs performance policy on some\n"
+"                           Intel models [0-15], see manpage for details\n"
+msgstr ""
+
+#: utils/cpupower-info.c:25
+#, fuzzy, c-format
+msgid "  -m, --sched-mc     Gets the kernel's multi core scheduler policy.\n"
+msgstr ""
+"  -p, --policy         Mostra il gestore cpufreq attualmente in uso *\n"
+
+#: utils/cpupower-info.c:26
+#, c-format
+msgid ""
+"  -s, --sched-smt    Gets the kernel's thread sibling scheduler policy.\n"
+msgstr ""
+
+#: utils/cpupower-info.c:28
+#, c-format
+msgid ""
+"\n"
+"Passing no option will show all info, by default only on core 0\n"
+msgstr ""
+
+#: utils/cpupower-info.c:102
+#, c-format
+msgid "System's multi core scheduler setting: "
+msgstr ""
+
+#. if sysfs file is missing it's: errno == ENOENT
+#: utils/cpupower-info.c:105 utils/cpupower-info.c:114
+#, c-format
+msgid "not supported\n"
+msgstr ""
+
+#: utils/cpupower-info.c:111
+#, c-format
+msgid "System's thread sibling scheduler setting: "
+msgstr ""
+
+#: utils/cpupower-info.c:126
+#, c-format
+msgid "Intel's performance bias setting needs root privileges\n"
+msgstr ""
+
+#: utils/cpupower-info.c:128
+#, c-format
+msgid "System does not support Intel's performance bias setting\n"
+msgstr ""
+
+#: utils/cpupower-info.c:147
+#, c-format
+msgid "Could not read perf-bias value\n"
+msgstr ""
+
+#: utils/cpupower-info.c:150
+#, c-format
+msgid "perf-bias: %d\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:28
+#, fuzzy, c-format
+msgid "Analyzing CPU %d:\n"
+msgstr "analisi della CPU %d:\n"
+
+#: utils/cpuidle-info.c:32
+#, c-format
+msgid "CPU %u: No idle states\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:36
+#, c-format
+msgid "CPU %u: Can't read idle state info\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:41
+#, c-format
+msgid "Could not determine max idle state %u\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:46
+#, c-format
+msgid "Number of idle states: %d\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:48
+#, fuzzy, c-format
+msgid "Available idle states:"
+msgstr "  frequenze disponibili: "
+
+#: utils/cpuidle-info.c:71
+#, c-format
+msgid "Flags/Description: %s\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:74
+#, c-format
+msgid "Latency: %lu\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:76
+#, c-format
+msgid "Usage: %lu\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:78
+#, c-format
+msgid "Duration: %llu\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:90
+#, c-format
+msgid "Could not determine cpuidle driver\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:94
+#, fuzzy, c-format
+msgid "CPUidle driver: %s\n"
+msgstr "  modulo %s\n"
+
+#: utils/cpuidle-info.c:99
+#, c-format
+msgid "Could not determine cpuidle governor\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:103
+#, c-format
+msgid "CPUidle governor: %s\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:122
+#, c-format
+msgid "CPU %u: Can't read C-state info\n"
+msgstr ""
+
+#. printf("Cstates: %d\n", cstates);
+#: utils/cpuidle-info.c:127
+#, c-format
+msgid "active state:            C0\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:128
+#, c-format
+msgid "max_cstate:              C%u\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:129
+#, fuzzy, c-format
+msgid "maximum allowed latency: %lu usec\n"
+msgstr "  latenza massima durante la transizione: "
+
+#: utils/cpuidle-info.c:130
+#, c-format
+msgid "states:\t\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:132
+#, c-format
+msgid "    C%d:                  type[C%d] "
+msgstr ""
+
+#: utils/cpuidle-info.c:134
+#, c-format
+msgid "promotion[--] demotion[--] "
+msgstr ""
+
+#: utils/cpuidle-info.c:135
+#, c-format
+msgid "latency[%03lu] "
+msgstr ""
+
+#: utils/cpuidle-info.c:137
+#, c-format
+msgid "usage[%08lu] "
+msgstr ""
+
+#: utils/cpuidle-info.c:139
+#, c-format
+msgid "duration[%020Lu] \n"
+msgstr ""
+
+#: utils/cpuidle-info.c:147
+#, fuzzy, c-format
+msgid "Usage: cpupower idleinfo [options]\n"
+msgstr "Uso: cpufreq-info [opzioni]\n"
+
+#: utils/cpuidle-info.c:149
+#, fuzzy, c-format
+msgid "  -s, --silent         Only show general C-state information\n"
+msgstr "  -e, --debug          Mostra informazioni di debug\n"
+
+#: utils/cpuidle-info.c:150
+#, fuzzy, c-format
+msgid ""
+"  -o, --proc           Prints out information like provided by the /proc/"
+"acpi/processor/*/power\n"
+"                       interface in older kernels\n"
+msgstr ""
+"  -o, --proc           Stampa le informazioni come se provenissero dalla\n"
+"                       interfaccia cpufreq /proc/ presente nei kernel\n"
+"                       2.4 ed i primi 2.6\n"
+
+#: utils/cpuidle-info.c:209
+#, fuzzy, c-format
+msgid "You can't specify more than one output-specific argument\n"
+msgstr ""
+"Non è possibile specificare più di una volta l'opzione --cpu e/o\n"
+"specificare più di un parametro di output specifico\n"
+
+#~ msgid ""
+#~ "  -c CPU, --cpu CPU    CPU number which information shall be determined "
+#~ "about\n"
+#~ msgstr ""
+#~ "  -c CPU, --cpu CPU    Numero di CPU per la quale ottenere le "
+#~ "informazioni\n"
+
+#~ msgid ""
+#~ "  -c CPU, --cpu CPU        number of CPU where cpufreq settings shall be "
+#~ "modified\n"
+#~ msgstr ""
+#~ "  -c CPU, --cpu CPU        numero di CPU per la quale modificare le "
+#~ "impostazioni\n"
+
+#, fuzzy
+#~ msgid "  CPUs which coordinate software frequency requirements: "
+#~ msgstr ""
+#~ "  CPU per le quali e` necessario cambiare la frequenza "
+#~ "contemporaneamente: "
diff --git a/tools/power/cpupower/po/pt.po b/tools/power/cpupower/po/pt.po
new file mode 100644
index 000000000000..990f5267ffe8
--- /dev/null
+++ b/tools/power/cpupower/po/pt.po
@@ -0,0 +1,957 @@
+# Brazilian Portuguese translations for cpufrequtils package
+# Copyright (C) 2008 THE cpufrequtils'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the cpufrequtils package.
+# Claudio Eduardo <claudioeddy@gmail.com>, 2009.
+#
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: cpufrequtils 004\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2011-03-08 17:03+0100\n"
+"PO-Revision-Date: 2008-06-14 22:16-0400\n"
+"Last-Translator: Claudio Eduardo <claudioeddy@gmail.com>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: utils/idle_monitor/nhm_idle.c:36
+msgid "Processor Core C3"
+msgstr ""
+
+#: utils/idle_monitor/nhm_idle.c:43
+msgid "Processor Core C6"
+msgstr ""
+
+#: utils/idle_monitor/nhm_idle.c:51
+msgid "Processor Package C3"
+msgstr ""
+
+#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70
+msgid "Processor Package C6"
+msgstr ""
+
+#: utils/idle_monitor/snb_idle.c:33
+msgid "Processor Core C7"
+msgstr ""
+
+#: utils/idle_monitor/snb_idle.c:40
+msgid "Processor Package C2"
+msgstr ""
+
+#: utils/idle_monitor/snb_idle.c:47
+msgid "Processor Package C7"
+msgstr ""
+
+#: utils/idle_monitor/amd_fam14h_idle.c:56
+msgid "Package in sleep state (PC1 or deeper)"
+msgstr ""
+
+#: utils/idle_monitor/amd_fam14h_idle.c:63
+msgid "Processor Package C1"
+msgstr ""
+
+#: utils/idle_monitor/amd_fam14h_idle.c:77
+msgid "North Bridge P1 boolean counter (returns 0 or 1)"
+msgstr ""
+
+#: utils/idle_monitor/mperf_monitor.c:35
+msgid "Processor Core not idle"
+msgstr ""
+
+#: utils/idle_monitor/mperf_monitor.c:42
+msgid "Processor Core in an idle state"
+msgstr ""
+
+#: utils/idle_monitor/mperf_monitor.c:50
+msgid "Average Frequency (including boost) in MHz"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:66
+#, c-format
+msgid ""
+"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
+"interval_sec | -c command ...]\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:69
+#, c-format
+msgid ""
+"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
+"interval_sec | -c command ...]\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:71
+#, c-format
+msgid "\t -v: be more verbose\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:73
+#, c-format
+msgid "\t -h: print this help\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:74
+#, c-format
+msgid "\t -i: time intervall to measure for in seconds (default 1)\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:75
+#, c-format
+msgid "\t -t: show CPU topology/hierarchy\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:76
+#, c-format
+msgid "\t -l: list available CPU sleep monitors (for use with -m)\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:77
+#, c-format
+msgid "\t -m: show specific CPU sleep monitors only (in same order)\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:79
+#, c-format
+msgid ""
+"only one of: -t, -l, -m are allowed\n"
+"If none of them is passed,"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:80
+#, c-format
+msgid " all supported monitors are shown\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:197
+#, c-format
+msgid "Monitor %s, Counter %s has no count function. Implementation error\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:207
+#, c-format
+msgid " *is offline\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:236
+#, c-format
+msgid "%s: max monitor name length (%d) exceeded\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:250
+#, c-format
+msgid "No matching monitor found in %s, try -l option\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:266
+#, c-format
+msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:319
+#, c-format
+msgid "%s took %.5f seconds and exited with status %d\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:406
+#, c-format
+msgid "Cannot read number of available processors\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:417
+#, c-format
+msgid "Available monitor %s needs root access\n"
+msgstr ""
+
+#: utils/idle_monitor/cpupower-monitor.c:428
+#, c-format
+msgid "No HW Cstate monitors found\n"
+msgstr ""
+
+#: utils/cpupower.c:78
+#, c-format
+msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n"
+msgstr ""
+
+#: utils/cpupower.c:79
+#, c-format
+msgid "cpupower --version\n"
+msgstr ""
+
+#: utils/cpupower.c:80
+#, c-format
+msgid "Supported subcommands are:\n"
+msgstr ""
+
+#: utils/cpupower.c:83
+#, c-format
+msgid ""
+"\n"
+"Some subcommands can make use of the -c cpulist option.\n"
+msgstr ""
+
+#: utils/cpupower.c:84
+#, c-format
+msgid "Look at the general cpupower manpage how to use it\n"
+msgstr ""
+
+#: utils/cpupower.c:85
+#, c-format
+msgid "and read up the subcommand's manpage whether it is supported.\n"
+msgstr ""
+
+#: utils/cpupower.c:86
+#, c-format
+msgid ""
+"\n"
+"Use cpupower help subcommand for getting help for above subcommands.\n"
+msgstr ""
+
+#: utils/cpupower.c:91
+#, c-format
+msgid "Report errors and bugs to %s, please.\n"
+msgstr "Reporte erros e bugs para %s, por favor.\n"
+
+#: utils/cpupower.c:114
+#, c-format
+msgid "Error parsing cpu list\n"
+msgstr ""
+
+#: utils/cpupower.c:172
+#, c-format
+msgid "Subcommand %s needs root privileges\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:31
+#, c-format
+msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n"
+msgstr "Não foi possível contar o número de CPUs (%s: %s), assumindo 1\n"
+
+#: utils/cpufreq-info.c:63
+#, c-format
+msgid ""
+"          minimum CPU frequency  -  maximum CPU frequency  -  governor\n"
+msgstr ""
+"          frequência mínina do CPU  -  frequência máxima do CPU  -  "
+"regulador\n"
+
+#: utils/cpufreq-info.c:151
+#, c-format
+msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n"
+msgstr ""
+
+#. P state changes via MSR are identified via cpuid 80000007
+#. on Intel and AMD, but we assume boost capable machines can do that
+#. if (cpuid_eax(0x80000000) >= 0x80000007
+#. && (cpuid_edx(0x80000007) & (1 << 7)))
+#.
+#: utils/cpufreq-info.c:161
+#, c-format
+msgid "  boost state support: \n"
+msgstr ""
+
+#: utils/cpufreq-info.c:163
+#, c-format
+msgid "    Supported: %s\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
+msgid "yes"
+msgstr ""
+
+#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
+msgid "no"
+msgstr ""
+
+#: utils/cpufreq-info.c:164
+#, fuzzy, c-format
+msgid "    Active: %s\n"
+msgstr "  driver: %s\n"
+
+#: utils/cpufreq-info.c:177
+#, c-format
+msgid "    Boost States: %d\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:178
+#, c-format
+msgid "    Total States: %d\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:181
+#, c-format
+msgid "    Pstate-Pb%d: %luMHz (boost state)\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:184
+#, c-format
+msgid "    Pstate-P%d:  %luMHz\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:211
+#, c-format
+msgid "  no or unknown cpufreq driver is active on this CPU\n"
+msgstr "  nenhum ou driver do cpufreq deconhecido está ativo nesse CPU\n"
+
+#: utils/cpufreq-info.c:213
+#, c-format
+msgid "  driver: %s\n"
+msgstr "  driver: %s\n"
+
+#: utils/cpufreq-info.c:219
+#, c-format
+msgid "  CPUs which run at the same hardware frequency: "
+msgstr "  CPUs que rodam na mesma frequência de hardware: "
+
+#: utils/cpufreq-info.c:230
+#, c-format
+msgid "  CPUs which need to have their frequency coordinated by software: "
+msgstr "  CPUs que precisam ter suas frequências coordenadas por software: "
+
+#: utils/cpufreq-info.c:241
+#, c-format
+msgid "  maximum transition latency: "
+msgstr "  maior latência de transição: "
+
+#: utils/cpufreq-info.c:247
+#, c-format
+msgid "  hardware limits: "
+msgstr "  limites do hardware: "
+
+#: utils/cpufreq-info.c:256
+#, c-format
+msgid "  available frequency steps: "
+msgstr "  níveis de frequência disponíveis: "
+
+#: utils/cpufreq-info.c:269
+#, c-format
+msgid "  available cpufreq governors: "
+msgstr "  reguladores do cpufreq disponíveis: "
+
+#: utils/cpufreq-info.c:280
+#, c-format
+msgid "  current policy: frequency should be within "
+msgstr "  política de frequência atual deve estar entre "
+
+#: utils/cpufreq-info.c:282
+#, c-format
+msgid " and "
+msgstr " e "
+
+#: utils/cpufreq-info.c:286
+#, c-format
+msgid ""
+"The governor \"%s\" may decide which speed to use\n"
+"                  within this range.\n"
+msgstr ""
+"O regulador \"%s\" deve decidir qual velocidade usar\n"
+"                  dentro desse limite.\n"
+
+#: utils/cpufreq-info.c:293
+#, c-format
+msgid "  current CPU frequency is "
+msgstr "  frequência atual do CPU é "
+
+#: utils/cpufreq-info.c:296
+#, c-format
+msgid " (asserted by call to hardware)"
+msgstr " (declarado por chamada ao hardware)"
+
+#: utils/cpufreq-info.c:304
+#, c-format
+msgid "  cpufreq stats: "
+msgstr "  status do cpufreq: "
+
+#: utils/cpufreq-info.c:472
+#, fuzzy, c-format
+msgid "Usage: cpupower freqinfo [options]\n"
+msgstr "Uso: cpufreq-info [opções]\n"
+
+#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23
+#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148
+#, c-format
+msgid "Options:\n"
+msgstr "Opções:\n"
+
+#: utils/cpufreq-info.c:474
+#, fuzzy, c-format
+msgid "  -e, --debug          Prints out debug information [default]\n"
+msgstr "  -e, --debug          Mostra informação de debug\n"
+
+#: utils/cpufreq-info.c:475
+#, c-format
+msgid ""
+"  -f, --freq           Get frequency the CPU currently runs at, according\n"
+"                       to the cpufreq core *\n"
+msgstr ""
+"  -f, --freq           Obtem a frequência na qual o CPU roda no momento, de "
+"acordo\n"
+"                       com o núcleo do cpufreq *\n"
+
+#: utils/cpufreq-info.c:477
+#, c-format
+msgid ""
+"  -w, --hwfreq         Get frequency the CPU currently runs at, by reading\n"
+"                       it from hardware (only available to root) *\n"
+msgstr ""
+"  -w, --hwfreq         Obtem a frequência na qual o CPU está operando no "
+"momento,\n"
+"                       através de leitura no hardware (disponível somente "
+"para root) *\n"
+
+#: utils/cpufreq-info.c:479
+#, c-format
+msgid ""
+"  -l, --hwlimits       Determine the minimum and maximum CPU frequency "
+"allowed *\n"
+msgstr ""
+"  -l, --hwlimits       Determina a frequência mínima e máxima do CPU "
+"permitida *\n"
+
+#: utils/cpufreq-info.c:480
+#, c-format
+msgid "  -d, --driver         Determines the used cpufreq kernel driver *\n"
+msgstr ""
+"  -d,  --driver         Determina o driver do kernel do cpufreq usado *\n"
+
+#: utils/cpufreq-info.c:481
+#, c-format
+msgid "  -p, --policy         Gets the currently used cpufreq policy *\n"
+msgstr ""
+"--p, --policy         Obtem a política do cpufreq em uso no momento *\n"
+
+#: utils/cpufreq-info.c:482
+#, c-format
+msgid "  -g, --governors      Determines available cpufreq governors *\n"
+msgstr ""
+"  -g, --governors      Determina reguladores do cpufreq disponíveis *\n"
+
+#: utils/cpufreq-info.c:483
+#, c-format
+msgid ""
+"  -r, --related-cpus   Determines which CPUs run at the same hardware "
+"frequency *\n"
+msgstr ""
+"  -r, --related-cpus   Determina quais CPUs rodam na mesma frequência de "
+"hardware *\n"
+
+#: utils/cpufreq-info.c:484
+#, c-format
+msgid ""
+"  -a, --affected-cpus  Determines which CPUs need to have their frequency\n"
+"                       coordinated by software *\n"
+msgstr ""
+"  -a, --affected-cpus  Determina quais CPUs precisam ter suas frequências\n"
+"                       coordenadas por software *\n"
+
+#: utils/cpufreq-info.c:486
+#, c-format
+msgid "  -s, --stats          Shows cpufreq statistics if available\n"
+msgstr "  -s, --stats          Mostra estatísticas do cpufreq se disponíveis\n"
+
+#: utils/cpufreq-info.c:487
+#, c-format
+msgid ""
+"  -y, --latency        Determines the maximum latency on CPU frequency "
+"changes *\n"
+msgstr ""
+"  -y, --latency        Determina a latência máxima nas trocas de frequência "
+"do CPU *\n"
+
+#: utils/cpufreq-info.c:488
+#, c-format
+msgid "  -b, --boost          Checks for turbo or boost modes  *\n"
+msgstr ""
+
+#: utils/cpufreq-info.c:489
+#, c-format
+msgid ""
+"  -o, --proc           Prints out information like provided by the /proc/"
+"cpufreq\n"
+"                       interface in 2.4. and early 2.6. kernels\n"
+msgstr ""
+"  -o, --proc           Mostra informação do tipo provida pela interface /"
+"proc/cpufreq\n"
+"                       em kernels 2.4. e mais recentes 2.6\n"
+
+#: utils/cpufreq-info.c:491
+#, c-format
+msgid ""
+"  -m, --human          human-readable output for the -f, -w, -s and -y "
+"parameters\n"
+msgstr ""
+"  -m, --human          saída legível para humanos para os parâmetros -f, -w, "
+"-s e -y\n"
+
+#: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152
+#, c-format
+msgid "  -h, --help           Prints out this screen\n"
+msgstr " -h, --help           Imprime essa tela\n"
+
+#: utils/cpufreq-info.c:495
+#, c-format
+msgid ""
+"If no argument or only the -c, --cpu parameter is given, debug output about\n"
+"cpufreq is printed which is useful e.g. for reporting bugs.\n"
+msgstr ""
+"Se nenhum argumento ou somente o parâmetro -c, --cpu é dado, informação de "
+"debug sobre\n"
+"o cpufreq é mostrada, o que é útil por exemplo para reportar bugs.\n"
+
+#: utils/cpufreq-info.c:497
+#, c-format
+msgid ""
+"For the arguments marked with *, omitting the -c or --cpu argument is\n"
+"equivalent to setting it to zero\n"
+msgstr ""
+"Para os argumentos marcados com *, omitir o argumento -c ou --cpu é\n"
+"equivalente a setá-lo como zero\n"
+
+#: utils/cpufreq-info.c:580
+#, c-format
+msgid ""
+"The argument passed to this tool can't be combined with passing a --cpu "
+"argument\n"
+msgstr ""
+"O argumento usado pra essa ferramenta não pode ser combinado com um "
+"argumento --cpu\n"
+
+#: utils/cpufreq-info.c:596
+#, c-format
+msgid ""
+"You can't specify more than one --cpu parameter and/or\n"
+"more than one output-specific argument\n"
+msgstr ""
+"Você não pode especificar mais do que um parâmetro --cpu e/ou\n"
+"mais do que um argumento de saída específico\n"
+
+#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42
+#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213
+#, c-format
+msgid "invalid or unknown argument\n"
+msgstr "argumento inválido ou desconhecido\n"
+
+#: utils/cpufreq-info.c:617
+#, c-format
+msgid "couldn't analyze CPU %d as it doesn't seem to be present\n"
+msgstr ""
+"não foi possível analisar o CPU % já que o mesmo parece não estar presente\n"
+
+#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142
+#, c-format
+msgid "analyzing CPU %d:\n"
+msgstr "analisando o CPU %d:\n"
+
+#: utils/cpufreq-set.c:25
+#, fuzzy, c-format
+msgid "Usage: cpupower frequency-set [options]\n"
+msgstr "Uso: cpufreq-set [opções]\n"
+
+#: utils/cpufreq-set.c:27
+#, c-format
+msgid ""
+"  -d FREQ, --min FREQ      new minimum CPU frequency the governor may "
+"select\n"
+msgstr ""
+"  -d FREQ, --min FREQ      nova frequência mínima do CPU que o regulador "
+"deve selecionar\n"
+
+#: utils/cpufreq-set.c:28
+#, c-format
+msgid ""
+"  -u FREQ, --max FREQ      new maximum CPU frequency the governor may "
+"select\n"
+msgstr ""
+"  -u FREQ, --max FREQ      nova frequência máxima do CPU que o regulador "
+"deve escolher\n"
+
+#: utils/cpufreq-set.c:29
+#, c-format
+msgid "  -g GOV, --governor GOV   new cpufreq governor\n"
+msgstr "  -g GOV, --governor GOV   novo regulador do cpufreq\n"
+
+#: utils/cpufreq-set.c:30
+#, c-format
+msgid ""
+"  -f FREQ, --freq FREQ     specific frequency to be set. Requires userspace\n"
+"                           governor to be available and loaded\n"
+msgstr ""
+"  -f FREQ, --freq FREQ     frequência específica para ser setada. Necessita "
+"que o regulador em\n"
+"                           nível de usuário esteja disponível e carregado\n"
+
+#: utils/cpufreq-set.c:32
+#, c-format
+msgid "  -r, --related            Switches all hardware-related CPUs\n"
+msgstr ""
+"  -r, --related            Modifica todos os CPUs relacionados ao hardware\n"
+
+#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27
+#, c-format
+msgid "  -h, --help               Prints out this screen\n"
+msgstr " -h, --help           Mostra essa tela\n"
+
+#: utils/cpufreq-set.c:35
+#, fuzzy, c-format
+msgid ""
+"Notes:\n"
+"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n"
+msgstr ""
+"Para os argumentos marcados com *, omitir o argumento -c ou --cpu é\n"
+"equivalente a setá-lo como zero\n"
+
+#: utils/cpufreq-set.c:37
+#, fuzzy, c-format
+msgid ""
+"2. The -f FREQ, --freq FREQ parameter cannot be combined with any other "
+"parameter\n"
+"   except the -c CPU, --cpu CPU parameter\n"
+"3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n"
+"   by postfixing the value with the wanted unit name, without any space\n"
+"   (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n"
+msgstr ""
+"Notas:\n"
+"1. Omitir o argumento -c or --cpu é equivalente a setá-lo como zero\n"
+"2. O parâmetro -f FREQ, --freq FREQ não pode ser combinado com qualquer "
+"outro parâmetro\n"
+"   exceto com o parâmetro -c CPU, --cpu CPU\n"
+"3. FREQuências podem ser usadas em Hz, kHz (padrão), MHz, GHz, o THz\n"
+"   colocando o nome desejado da unidade após o valor, sem qualquer espaço\n"
+"   (FREQuência em kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n"
+
+#: utils/cpufreq-set.c:57
+#, c-format
+msgid ""
+"Error setting new values. Common errors:\n"
+"- Do you have proper administration rights? (super-user?)\n"
+"- Is the governor you requested available and modprobed?\n"
+"- Trying to set an invalid policy?\n"
+"- Trying to set a specific frequency, but userspace governor is not "
+"available,\n"
+"   for example because of hardware which cannot be set to a specific "
+"frequency\n"
+"   or because the userspace governor isn't loaded?\n"
+msgstr ""
+"Erro ao setar novos valores. Erros comuns:\n"
+"- Você tem direitos administrativos necessários? (super-usuário?)\n"
+"- O regulador que você requesitou está disponível e foi \"modprobed\"?\n"
+"- Tentando setar uma política inválida?\n"
+"- Tentando setar uma frequência específica, mas o regulador em nível de "
+"usuário não está disponível,\n"
+"   por exemplo devido ao hardware que não pode ser setado pra uma frequência "
+"específica\n"
+"   ou porque o regulador em nível de usuário não foi carregado?\n"
+
+#: utils/cpufreq-set.c:170
+#, c-format
+msgid "wrong, unknown or unhandled CPU?\n"
+msgstr "CPU errado, desconhecido ou inesperado?\n"
+
+#: utils/cpufreq-set.c:302
+#, c-format
+msgid ""
+"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n"
+"-g/--governor parameters\n"
+msgstr ""
+"o parâmetro -f/--freq não pode ser combinado com os parâmetros -d/--min, -"
+"u/--max ou\n"
+"-g/--governor\n"
+
+#: utils/cpufreq-set.c:308
+#, c-format
+msgid ""
+"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n"
+"-g/--governor must be passed\n"
+msgstr ""
+"Pelo menos um parâmetro entre -f/--freq, -d/--min, -u/--max, e\n"
+"-g/--governor deve ser usado\n"
+
+#: utils/cpufreq-set.c:347
+#, c-format
+msgid "Setting cpu: %d\n"
+msgstr ""
+
+#: utils/cpupower-set.c:22
+#, c-format
+msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n"
+msgstr ""
+
+#: utils/cpupower-set.c:24
+#, c-format
+msgid ""
+"  -b, --perf-bias [VAL]    Sets CPU's power vs performance policy on some\n"
+"                           Intel models [0-15], see manpage for details\n"
+msgstr ""
+
+#: utils/cpupower-set.c:26
+#, c-format
+msgid ""
+"  -m, --sched-mc  [VAL]    Sets the kernel's multi core scheduler policy.\n"
+msgstr ""
+
+#: utils/cpupower-set.c:27
+#, c-format
+msgid ""
+"  -s, --sched-smt [VAL]    Sets the kernel's thread sibling scheduler "
+"policy.\n"
+msgstr ""
+
+#: utils/cpupower-set.c:80
+#, c-format
+msgid "--perf-bias param out of range [0-%d]\n"
+msgstr ""
+
+#: utils/cpupower-set.c:91
+#, c-format
+msgid "--sched-mc param out of range [0-%d]\n"
+msgstr ""
+
+#: utils/cpupower-set.c:102
+#, c-format
+msgid "--sched-smt param out of range [0-%d]\n"
+msgstr ""
+
+#: utils/cpupower-set.c:121
+#, c-format
+msgid "Error setting sched-mc %s\n"
+msgstr ""
+
+#: utils/cpupower-set.c:127
+#, c-format
+msgid "Error setting sched-smt %s\n"
+msgstr ""
+
+#: utils/cpupower-set.c:146
+#, c-format
+msgid "Error setting perf-bias value on CPU %d\n"
+msgstr ""
+
+#: utils/cpupower-info.c:21
+#, c-format
+msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n"
+msgstr ""
+
+#: utils/cpupower-info.c:23
+#, c-format
+msgid ""
+"  -b, --perf-bias    Gets CPU's power vs performance policy on some\n"
+"                           Intel models [0-15], see manpage for details\n"
+msgstr ""
+
+#: utils/cpupower-info.c:25
+#, fuzzy, c-format
+msgid "  -m, --sched-mc     Gets the kernel's multi core scheduler policy.\n"
+msgstr ""
+"--p, --policy         Obtem a política do cpufreq em uso no momento *\n"
+
+#: utils/cpupower-info.c:26
+#, c-format
+msgid ""
+"  -s, --sched-smt    Gets the kernel's thread sibling scheduler policy.\n"
+msgstr ""
+
+#: utils/cpupower-info.c:28
+#, c-format
+msgid ""
+"\n"
+"Passing no option will show all info, by default only on core 0\n"
+msgstr ""
+
+#: utils/cpupower-info.c:102
+#, c-format
+msgid "System's multi core scheduler setting: "
+msgstr ""
+
+#. if sysfs file is missing it's: errno == ENOENT
+#: utils/cpupower-info.c:105 utils/cpupower-info.c:114
+#, c-format
+msgid "not supported\n"
+msgstr ""
+
+#: utils/cpupower-info.c:111
+#, c-format
+msgid "System's thread sibling scheduler setting: "
+msgstr ""
+
+#: utils/cpupower-info.c:126
+#, c-format
+msgid "Intel's performance bias setting needs root privileges\n"
+msgstr ""
+
+#: utils/cpupower-info.c:128
+#, c-format
+msgid "System does not support Intel's performance bias setting\n"
+msgstr ""
+
+#: utils/cpupower-info.c:147
+#, c-format
+msgid "Could not read perf-bias value\n"
+msgstr ""
+
+#: utils/cpupower-info.c:150
+#, c-format
+msgid "perf-bias: %d\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:28
+#, fuzzy, c-format
+msgid "Analyzing CPU %d:\n"
+msgstr "analisando o CPU %d:\n"
+
+#: utils/cpuidle-info.c:32
+#, c-format
+msgid "CPU %u: No idle states\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:36
+#, c-format
+msgid "CPU %u: Can't read idle state info\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:41
+#, c-format
+msgid "Could not determine max idle state %u\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:46
+#, c-format
+msgid "Number of idle states: %d\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:48
+#, fuzzy, c-format
+msgid "Available idle states:"
+msgstr "  níveis de frequência disponíveis: "
+
+#: utils/cpuidle-info.c:71
+#, c-format
+msgid "Flags/Description: %s\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:74
+#, c-format
+msgid "Latency: %lu\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:76
+#, c-format
+msgid "Usage: %lu\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:78
+#, c-format
+msgid "Duration: %llu\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:90
+#, c-format
+msgid "Could not determine cpuidle driver\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:94
+#, fuzzy, c-format
+msgid "CPUidle driver: %s\n"
+msgstr "  driver: %s\n"
+
+#: utils/cpuidle-info.c:99
+#, c-format
+msgid "Could not determine cpuidle governor\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:103
+#, c-format
+msgid "CPUidle governor: %s\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:122
+#, c-format
+msgid "CPU %u: Can't read C-state info\n"
+msgstr ""
+
+#. printf("Cstates: %d\n", cstates);
+#: utils/cpuidle-info.c:127
+#, c-format
+msgid "active state:            C0\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:128
+#, c-format
+msgid "max_cstate:              C%u\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:129
+#, fuzzy, c-format
+msgid "maximum allowed latency: %lu usec\n"
+msgstr "  maior latência de transição: "
+
+#: utils/cpuidle-info.c:130
+#, c-format
+msgid "states:\t\n"
+msgstr ""
+
+#: utils/cpuidle-info.c:132
+#, c-format
+msgid "    C%d:                  type[C%d] "
+msgstr ""
+
+#: utils/cpuidle-info.c:134
+#, c-format
+msgid "promotion[--] demotion[--] "
+msgstr ""
+
+#: utils/cpuidle-info.c:135
+#, c-format
+msgid "latency[%03lu] "
+msgstr ""
+
+#: utils/cpuidle-info.c:137
+#, c-format
+msgid "usage[%08lu] "
+msgstr ""
+
+#: utils/cpuidle-info.c:139
+#, c-format
+msgid "duration[%020Lu] \n"
+msgstr ""
+
+#: utils/cpuidle-info.c:147
+#, fuzzy, c-format
+msgid "Usage: cpupower idleinfo [options]\n"
+msgstr "Uso: cpufreq-info [opções]\n"
+
+#: utils/cpuidle-info.c:149
+#, fuzzy, c-format
+msgid "  -s, --silent         Only show general C-state information\n"
+msgstr "  -e, --debug          Mostra informação de debug\n"
+
+#: utils/cpuidle-info.c:150
+#, fuzzy, c-format
+msgid ""
+"  -o, --proc           Prints out information like provided by the /proc/"
+"acpi/processor/*/power\n"
+"                       interface in older kernels\n"
+msgstr ""
+"  -o, --proc           Mostra informação do tipo provida pela interface /"
+"proc/cpufreq\n"
+"                       em kernels 2.4. e mais recentes 2.6\n"
+
+#: utils/cpuidle-info.c:209
+#, fuzzy, c-format
+msgid "You can't specify more than one output-specific argument\n"
+msgstr ""
+"Você não pode especificar mais do que um parâmetro --cpu e/ou\n"
+"mais do que um argumento de saída específico\n"
+
+#~ msgid ""
+#~ "  -c CPU, --cpu CPU    CPU number which information shall be determined "
+#~ "about\n"
+#~ msgstr ""
+#~ "  -c CPU, --cpu CPU    número do CPU sobre o qual as inforções devem ser "
+#~ "determinadas\n"
+
+#~ msgid ""
+#~ "  -c CPU, --cpu CPU        number of CPU where cpufreq settings shall be "
+#~ "modified\n"
+#~ msgstr ""
+#~ "  -c CPU, --cpu CPU        número do CPU onde as configurações do cpufreq "
+#~ "vão ser modificadas\n"
diff --git a/tools/power/cpupower/utils/builtin.h b/tools/power/cpupower/utils/builtin.h
new file mode 100644
index 000000000000..c870ffba5219
--- /dev/null
+++ b/tools/power/cpupower/utils/builtin.h
@@ -0,0 +1,18 @@
+#ifndef BUILTIN_H
+#define BUILTIN_H
+
+extern int cmd_set(int argc, const char **argv);
+extern int cmd_info(int argc, const char **argv);
+extern int cmd_freq_set(int argc, const char **argv);
+extern int cmd_freq_info(int argc, const char **argv);
+extern int cmd_idle_info(int argc, const char **argv);
+extern int cmd_monitor(int argc, const char **argv);
+
+extern void set_help(void);
+extern void info_help(void);
+extern void freq_set_help(void);
+extern void freq_info_help(void);
+extern void idle_info_help(void);
+extern void monitor_help(void);
+
+#endif
diff --git a/tools/power/cpupower/utils/cpufreq-info.c b/tools/power/cpupower/utils/cpufreq-info.c
new file mode 100644
index 000000000000..5a1d25f056b3
--- /dev/null
+++ b/tools/power/cpupower/utils/cpufreq-info.c
@@ -0,0 +1,708 @@
+/*
+ *  (C) 2004-2009  Dominik Brodowski <linux@dominikbrodowski.de>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ */
+
+
+#include <unistd.h>
+#include <stdio.h>
+#include <errno.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <getopt.h>
+
+#include "cpufreq.h"
+#include "helpers/helpers.h"
+#include "helpers/bitmask.h"
+
+#define LINE_LEN 10
+
+static unsigned int count_cpus(void)
+{
+	FILE *fp;
+	char value[LINE_LEN];
+	unsigned int ret = 0;
+	unsigned int cpunr = 0;
+
+	fp = fopen("/proc/stat", "r");
+	if (!fp) {
+		printf(_("Couldn't count the number of CPUs (%s: %s), assuming 1\n"), "/proc/stat", strerror(errno));
+		return 1;
+	}
+
+	while (!feof(fp)) {
+		if (!fgets(value, LINE_LEN, fp))
+			continue;
+		value[LINE_LEN - 1] = '\0';
+		if (strlen(value) < (LINE_LEN - 2))
+			continue;
+		if (strstr(value, "cpu "))
+			continue;
+		if (sscanf(value, "cpu%d ", &cpunr) != 1)
+			continue;
+		if (cpunr > ret)
+			ret = cpunr;
+	}
+	fclose(fp);
+
+	/* cpu count starts from 0, on error return 1 (UP) */
+	return ret + 1;
+}
+
+
+static void proc_cpufreq_output(void)
+{
+	unsigned int cpu, nr_cpus;
+	struct cpufreq_policy *policy;
+	unsigned int min_pctg = 0;
+	unsigned int max_pctg = 0;
+	unsigned long min, max;
+
+	printf(_("          minimum CPU frequency  -  maximum CPU frequency  -  governor\n"));
+
+	nr_cpus = count_cpus();
+	for (cpu = 0; cpu < nr_cpus; cpu++) {
+		policy = cpufreq_get_policy(cpu);
+		if (!policy)
+			continue;
+
+		if (cpufreq_get_hardware_limits(cpu, &min, &max)) {
+			max = 0;
+		} else {
+			min_pctg = (policy->min * 100) / max;
+			max_pctg = (policy->max * 100) / max;
+		}
+		printf("CPU%3d    %9lu kHz (%3d %%)  -  %9lu kHz (%3d %%)  -  %s\n",
+			cpu , policy->min, max ? min_pctg : 0, policy->max,
+			max ? max_pctg : 0, policy->governor);
+
+		cpufreq_put_policy(policy);
+	}
+}
+
+static void print_speed(unsigned long speed)
+{
+	unsigned long tmp;
+
+	if (speed > 1000000) {
+		tmp = speed % 10000;
+		if (tmp >= 5000)
+			speed += 10000;
+		printf("%u.%02u GHz", ((unsigned int) speed/1000000),
+			((unsigned int) (speed%1000000)/10000));
+	} else if (speed > 100000) {
+		tmp = speed % 1000;
+		if (tmp >= 500)
+			speed += 1000;
+		printf("%u MHz", ((unsigned int) speed / 1000));
+	} else if (speed > 1000) {
+		tmp = speed % 100;
+		if (tmp >= 50)
+			speed += 100;
+		printf("%u.%01u MHz", ((unsigned int) speed/1000),
+			((unsigned int) (speed%1000)/100));
+	} else
+		printf("%lu kHz", speed);
+
+	return;
+}
+
+static void print_duration(unsigned long duration)
+{
+	unsigned long tmp;
+
+	if (duration > 1000000) {
+		tmp = duration % 10000;
+		if (tmp >= 5000)
+			duration += 10000;
+		printf("%u.%02u ms", ((unsigned int) duration/1000000),
+			((unsigned int) (duration%1000000)/10000));
+	} else if (duration > 100000) {
+		tmp = duration % 1000;
+		if (tmp >= 500)
+			duration += 1000;
+		printf("%u us", ((unsigned int) duration / 1000));
+	} else if (duration > 1000) {
+		tmp = duration % 100;
+		if (tmp >= 50)
+			duration += 100;
+		printf("%u.%01u us", ((unsigned int) duration/1000),
+			((unsigned int) (duration%1000)/100));
+	} else
+		printf("%lu ns", duration);
+
+	return;
+}
+
+/* --boost / -b */
+
+static int get_boost_mode(unsigned int cpu)
+{
+	int support, active, b_states = 0, ret, pstate_no, i;
+	/* ToDo: Make this more global */
+	unsigned long pstates[MAX_HW_PSTATES] = {0,};
+
+	if (cpupower_cpu_info.vendor != X86_VENDOR_AMD &&
+	    cpupower_cpu_info.vendor != X86_VENDOR_INTEL)
+		return 0;
+
+	ret = cpufreq_has_boost_support(cpu, &support, &active, &b_states);
+	if (ret) {
+		printf(_("Error while evaluating Boost Capabilities"
+				" on CPU %d -- are you root?\n"), cpu);
+		return ret;
+	}
+	/* P state changes via MSR are identified via cpuid 80000007
+	   on Intel and AMD, but we assume boost capable machines can do that
+	   if (cpuid_eax(0x80000000) >= 0x80000007
+	   && (cpuid_edx(0x80000007) & (1 << 7)))
+	*/
+
+	printf(_("  boost state support:\n"));
+
+	printf(_("    Supported: %s\n"), support ? _("yes") : _("no"));
+	printf(_("    Active: %s\n"), active ? _("yes") : _("no"));
+
+	if (cpupower_cpu_info.vendor == X86_VENDOR_AMD &&
+	    cpupower_cpu_info.family >= 0x10) {
+		ret = decode_pstates(cpu, cpupower_cpu_info.family, b_states,
+				     pstates, &pstate_no);
+		if (ret)
+			return ret;
+
+		printf(_("    Boost States: %d\n"), b_states);
+		printf(_("    Total States: %d\n"), pstate_no);
+		for (i = 0; i < pstate_no; i++) {
+			if (i < b_states)
+				printf(_("    Pstate-Pb%d: %luMHz (boost state)"
+					 "\n"), i, pstates[i]);
+			else
+				printf(_("    Pstate-P%d:  %luMHz\n"),
+				       i - b_states, pstates[i]);
+		}
+	} else if (cpupower_cpu_info.caps & CPUPOWER_CAP_HAS_TURBO_RATIO) {
+		double bclk;
+		unsigned long long intel_turbo_ratio = 0;
+		unsigned int ratio;
+
+		/* Any way to autodetect this ? */
+		if (cpupower_cpu_info.caps & CPUPOWER_CAP_IS_SNB)
+			bclk = 100.00;
+		else
+			bclk = 133.33;
+		intel_turbo_ratio = msr_intel_get_turbo_ratio(cpu);
+		dprint ("    Ratio: 0x%llx - bclk: %f\n",
+			intel_turbo_ratio, bclk);
+
+		ratio = (intel_turbo_ratio >> 24) & 0xFF;
+		if (ratio)
+			printf(_("    %.0f MHz max turbo 4 active cores\n"),
+			       ratio * bclk);
+
+		ratio = (intel_turbo_ratio >> 16) & 0xFF;
+		if (ratio)
+			printf(_("    %.0f MHz max turbo 3 active cores\n"),
+			       ratio * bclk);
+
+		ratio = (intel_turbo_ratio >> 8) & 0xFF;
+		if (ratio)
+			printf(_("    %.0f MHz max turbo 2 active cores\n"),
+			       ratio * bclk);
+
+		ratio = (intel_turbo_ratio >> 0) & 0xFF;
+		if (ratio)
+			printf(_("    %.0f MHz max turbo 1 active cores\n"),
+			       ratio * bclk);
+	}
+	return 0;
+}
+
+static void debug_output_one(unsigned int cpu)
+{
+	char *driver;
+	struct cpufreq_affected_cpus *cpus;
+	struct cpufreq_available_frequencies *freqs;
+	unsigned long min, max, freq_kernel, freq_hardware;
+	unsigned long total_trans, latency;
+	unsigned long long total_time;
+	struct cpufreq_policy *policy;
+	struct cpufreq_available_governors *governors;
+	struct cpufreq_stats *stats;
+
+	if (cpufreq_cpu_exists(cpu))
+		return;
+
+	freq_kernel = cpufreq_get_freq_kernel(cpu);
+	freq_hardware = cpufreq_get_freq_hardware(cpu);
+
+	driver = cpufreq_get_driver(cpu);
+	if (!driver) {
+		printf(_("  no or unknown cpufreq driver is active on this CPU\n"));
+	} else {
+		printf(_("  driver: %s\n"), driver);
+		cpufreq_put_driver(driver);
+	}
+
+	cpus = cpufreq_get_related_cpus(cpu);
+	if (cpus) {
+		printf(_("  CPUs which run at the same hardware frequency: "));
+		while (cpus->next) {
+			printf("%d ", cpus->cpu);
+			cpus = cpus->next;
+		}
+		printf("%d\n", cpus->cpu);
+		cpufreq_put_related_cpus(cpus);
+	}
+
+	cpus = cpufreq_get_affected_cpus(cpu);
+	if (cpus) {
+		printf(_("  CPUs which need to have their frequency coordinated by software: "));
+		while (cpus->next) {
+			printf("%d ", cpus->cpu);
+			cpus = cpus->next;
+		}
+		printf("%d\n", cpus->cpu);
+		cpufreq_put_affected_cpus(cpus);
+	}
+
+	latency = cpufreq_get_transition_latency(cpu);
+	if (latency) {
+		printf(_("  maximum transition latency: "));
+		print_duration(latency);
+		printf(".\n");
+	}
+
+	if (!(cpufreq_get_hardware_limits(cpu, &min, &max))) {
+		printf(_("  hardware limits: "));
+		print_speed(min);
+		printf(" - ");
+		print_speed(max);
+		printf("\n");
+	}
+
+	freqs = cpufreq_get_available_frequencies(cpu);
+	if (freqs) {
+		printf(_("  available frequency steps: "));
+		while (freqs->next) {
+			print_speed(freqs->frequency);
+			printf(", ");
+			freqs = freqs->next;
+		}
+		print_speed(freqs->frequency);
+		printf("\n");
+		cpufreq_put_available_frequencies(freqs);
+	}
+
+	governors = cpufreq_get_available_governors(cpu);
+	if (governors) {
+		printf(_("  available cpufreq governors: "));
+		while (governors->next) {
+			printf("%s, ", governors->governor);
+			governors = governors->next;
+		}
+		printf("%s\n", governors->governor);
+		cpufreq_put_available_governors(governors);
+	}
+
+	policy = cpufreq_get_policy(cpu);
+	if (policy) {
+		printf(_("  current policy: frequency should be within "));
+		print_speed(policy->min);
+		printf(_(" and "));
+		print_speed(policy->max);
+
+		printf(".\n                  ");
+		printf(_("The governor \"%s\" may"
+		       " decide which speed to use\n                  within this range.\n"),
+		       policy->governor);
+		cpufreq_put_policy(policy);
+	}
+
+	if (freq_kernel || freq_hardware) {
+		printf(_("  current CPU frequency is "));
+		if (freq_hardware) {
+			print_speed(freq_hardware);
+			printf(_(" (asserted by call to hardware)"));
+		} else
+			print_speed(freq_kernel);
+		printf(".\n");
+	}
+	stats = cpufreq_get_stats(cpu, &total_time);
+	if (stats) {
+		printf(_("  cpufreq stats: "));
+		while (stats) {
+			print_speed(stats->frequency);
+			printf(":%.2f%%", (100.0 * stats->time_in_state) / total_time);
+			stats = stats->next;
+			if (stats)
+				printf(", ");
+		}
+		cpufreq_put_stats(stats);
+		total_trans = cpufreq_get_transitions(cpu);
+		if (total_trans)
+			printf("  (%lu)\n", total_trans);
+		else
+			printf("\n");
+	}
+	get_boost_mode(cpu);
+
+}
+
+/* --freq / -f */
+
+static int get_freq_kernel(unsigned int cpu, unsigned int human)
+{
+	unsigned long freq = cpufreq_get_freq_kernel(cpu);
+	if (!freq)
+		return -EINVAL;
+	if (human) {
+		print_speed(freq);
+		printf("\n");
+	} else
+		printf("%lu\n", freq);
+	return 0;
+}
+
+
+/* --hwfreq / -w */
+
+static int get_freq_hardware(unsigned int cpu, unsigned int human)
+{
+	unsigned long freq = cpufreq_get_freq_hardware(cpu);
+	if (!freq)
+		return -EINVAL;
+	if (human) {
+		print_speed(freq);
+		printf("\n");
+	} else
+		printf("%lu\n", freq);
+	return 0;
+}
+
+/* --hwlimits / -l */
+
+static int get_hardware_limits(unsigned int cpu)
+{
+	unsigned long min, max;
+	if (cpufreq_get_hardware_limits(cpu, &min, &max))
+		return -EINVAL;
+	printf("%lu %lu\n", min, max);
+	return 0;
+}
+
+/* --driver / -d */
+
+static int get_driver(unsigned int cpu)
+{
+	char *driver = cpufreq_get_driver(cpu);
+	if (!driver)
+		return -EINVAL;
+	printf("%s\n", driver);
+	cpufreq_put_driver(driver);
+	return 0;
+}
+
+/* --policy / -p */
+
+static int get_policy(unsigned int cpu)
+{
+	struct cpufreq_policy *policy = cpufreq_get_policy(cpu);
+	if (!policy)
+		return -EINVAL;
+	printf("%lu %lu %s\n", policy->min, policy->max, policy->governor);
+	cpufreq_put_policy(policy);
+	return 0;
+}
+
+/* --governors / -g */
+
+static int get_available_governors(unsigned int cpu)
+{
+	struct cpufreq_available_governors *governors =
+		cpufreq_get_available_governors(cpu);
+	if (!governors)
+		return -EINVAL;
+
+	while (governors->next) {
+		printf("%s ", governors->governor);
+		governors = governors->next;
+	}
+	printf("%s\n", governors->governor);
+	cpufreq_put_available_governors(governors);
+	return 0;
+}
+
+
+/* --affected-cpus  / -a */
+
+static int get_affected_cpus(unsigned int cpu)
+{
+	struct cpufreq_affected_cpus *cpus = cpufreq_get_affected_cpus(cpu);
+	if (!cpus)
+		return -EINVAL;
+
+	while (cpus->next) {
+		printf("%d ", cpus->cpu);
+		cpus = cpus->next;
+	}
+	printf("%d\n", cpus->cpu);
+	cpufreq_put_affected_cpus(cpus);
+	return 0;
+}
+
+/* --related-cpus  / -r */
+
+static int get_related_cpus(unsigned int cpu)
+{
+	struct cpufreq_affected_cpus *cpus = cpufreq_get_related_cpus(cpu);
+	if (!cpus)
+		return -EINVAL;
+
+	while (cpus->next) {
+		printf("%d ", cpus->cpu);
+		cpus = cpus->next;
+	}
+	printf("%d\n", cpus->cpu);
+	cpufreq_put_related_cpus(cpus);
+	return 0;
+}
+
+/* --stats / -s */
+
+static int get_freq_stats(unsigned int cpu, unsigned int human)
+{
+	unsigned long total_trans = cpufreq_get_transitions(cpu);
+	unsigned long long total_time;
+	struct cpufreq_stats *stats = cpufreq_get_stats(cpu, &total_time);
+	while (stats) {
+		if (human) {
+			print_speed(stats->frequency);
+			printf(":%.2f%%",
+				(100.0 * stats->time_in_state) / total_time);
+		} else
+			printf("%lu:%llu",
+				stats->frequency, stats->time_in_state);
+		stats = stats->next;
+		if (stats)
+			printf(", ");
+	}
+	cpufreq_put_stats(stats);
+	if (total_trans)
+		printf("  (%lu)\n", total_trans);
+	return 0;
+}
+
+/* --latency / -y */
+
+static int get_latency(unsigned int cpu, unsigned int human)
+{
+	unsigned long latency = cpufreq_get_transition_latency(cpu);
+	if (!latency)
+		return -EINVAL;
+
+	if (human) {
+		print_duration(latency);
+		printf("\n");
+	} else
+		printf("%lu\n", latency);
+	return 0;
+}
+
+void freq_info_help(void)
+{
+	printf(_("Usage: cpupower freqinfo [options]\n"));
+	printf(_("Options:\n"));
+	printf(_("  -e, --debug          Prints out debug information [default]\n"));
+	printf(_("  -f, --freq           Get frequency the CPU currently runs at, according\n"
+	       "                       to the cpufreq core *\n"));
+	printf(_("  -w, --hwfreq         Get frequency the CPU currently runs at, by reading\n"
+	       "                       it from hardware (only available to root) *\n"));
+	printf(_("  -l, --hwlimits       Determine the minimum and maximum CPU frequency allowed *\n"));
+	printf(_("  -d, --driver         Determines the used cpufreq kernel driver *\n"));
+	printf(_("  -p, --policy         Gets the currently used cpufreq policy *\n"));
+	printf(_("  -g, --governors      Determines available cpufreq governors *\n"));
+	printf(_("  -r, --related-cpus   Determines which CPUs run at the same hardware frequency *\n"));
+	printf(_("  -a, --affected-cpus  Determines which CPUs need to have their frequency\n"
+			"                       coordinated by software *\n"));
+	printf(_("  -s, --stats          Shows cpufreq statistics if available\n"));
+	printf(_("  -y, --latency        Determines the maximum latency on CPU frequency changes *\n"));
+	printf(_("  -b, --boost          Checks for turbo or boost modes  *\n"));
+	printf(_("  -o, --proc           Prints out information like provided by the /proc/cpufreq\n"
+	       "                       interface in 2.4. and early 2.6. kernels\n"));
+	printf(_("  -m, --human          human-readable output for the -f, -w, -s and -y parameters\n"));
+	printf(_("  -h, --help           Prints out this screen\n"));
+
+	printf("\n");
+	printf(_("If no argument is given, full output about\n"
+	       "cpufreq is printed which is useful e.g. for reporting bugs.\n\n"));
+	printf(_("By default info of CPU 0 is shown which can be overridden\n"
+		 "with the cpupower --cpu main command option.\n"));
+}
+
+static struct option info_opts[] = {
+	{ .name = "debug",	.has_arg = no_argument,		.flag = NULL,	.val = 'e'},
+	{ .name = "boost",	.has_arg = no_argument,		.flag = NULL,	.val = 'b'},
+	{ .name = "freq",	.has_arg = no_argument,		.flag = NULL,	.val = 'f'},
+	{ .name = "hwfreq",	.has_arg = no_argument,		.flag = NULL,	.val = 'w'},
+	{ .name = "hwlimits",	.has_arg = no_argument,		.flag = NULL,	.val = 'l'},
+	{ .name = "driver",	.has_arg = no_argument,		.flag = NULL,	.val = 'd'},
+	{ .name = "policy",	.has_arg = no_argument,		.flag = NULL,	.val = 'p'},
+	{ .name = "governors",	.has_arg = no_argument,		.flag = NULL,	.val = 'g'},
+	{ .name = "related-cpus", .has_arg = no_argument,	.flag = NULL,	.val = 'r'},
+	{ .name = "affected-cpus",.has_arg = no_argument,	.flag = NULL,	.val = 'a'},
+	{ .name = "stats",	.has_arg = no_argument,		.flag = NULL,	.val = 's'},
+	{ .name = "latency",	.has_arg = no_argument,		.flag = NULL,	.val = 'y'},
+	{ .name = "proc",	.has_arg = no_argument,		.flag = NULL,	.val = 'o'},
+	{ .name = "human",	.has_arg = no_argument,		.flag = NULL,	.val = 'm'},
+	{ .name = "help",	.has_arg = no_argument,		.flag = NULL,	.val = 'h'},
+	{ },
+};
+
+int cmd_freq_info(int argc, char **argv)
+{
+	extern char *optarg;
+	extern int optind, opterr, optopt;
+	int ret = 0, cont = 1;
+	unsigned int cpu = 0;
+	unsigned int human = 0;
+	int output_param = 0;
+
+	do {
+		ret = getopt_long(argc, argv, "hoefwldpgrasmyb", info_opts, NULL);
+		switch (ret) {
+		case '?':
+			output_param = '?';
+			cont = 0;
+			break;
+		case 'h':
+			output_param = 'h';
+			cont = 0;
+			break;
+		case -1:
+			cont = 0;
+			break;
+		case 'b':
+		case 'o':
+		case 'a':
+		case 'r':
+		case 'g':
+		case 'p':
+		case 'd':
+		case 'l':
+		case 'w':
+		case 'f':
+		case 'e':
+		case 's':
+		case 'y':
+			if (output_param) {
+				output_param = -1;
+				cont = 0;
+				break;
+			}
+			output_param = ret;
+			break;
+		case 'm':
+			if (human) {
+				output_param = -1;
+				cont = 0;
+				break;
+			}
+			human = 1;
+			break;
+		default:
+			fprintf(stderr, "invalid or unknown argument\n");
+			return EXIT_FAILURE;
+		}
+	} while (cont);
+
+	switch (output_param) {
+	case 'o':
+		if (!bitmask_isallclear(cpus_chosen)) {
+			printf(_("The argument passed to this tool can't be "
+				 "combined with passing a --cpu argument\n"));
+			return -EINVAL;
+		}
+		break;
+	case 0:
+		output_param = 'e';
+	}
+
+	ret = 0;
+
+	/* Default is: show output of CPU 0 only */
+	if (bitmask_isallclear(cpus_chosen))
+		bitmask_setbit(cpus_chosen, 0);
+
+	switch (output_param) {
+	case -1:
+		printf(_("You can't specify more than one --cpu parameter and/or\n"
+		       "more than one output-specific argument\n"));
+		return -EINVAL;
+	case '?':
+		printf(_("invalid or unknown argument\n"));
+		freq_info_help();
+		return -EINVAL;
+	case 'h':
+		freq_info_help();
+		return EXIT_SUCCESS;
+	case 'o':
+		proc_cpufreq_output();
+		return EXIT_SUCCESS;
+	}
+
+	for (cpu = bitmask_first(cpus_chosen);
+	     cpu <= bitmask_last(cpus_chosen); cpu++) {
+
+		if (!bitmask_isbitset(cpus_chosen, cpu))
+			continue;
+		if (cpufreq_cpu_exists(cpu)) {
+			printf(_("couldn't analyze CPU %d as it doesn't seem to be present\n"), cpu);
+			continue;
+		}
+		printf(_("analyzing CPU %d:\n"), cpu);
+
+		switch (output_param) {
+		case 'b':
+			get_boost_mode(cpu);
+			break;
+		case 'e':
+			debug_output_one(cpu);
+			break;
+		case 'a':
+			ret = get_affected_cpus(cpu);
+			break;
+		case 'r':
+			ret = get_related_cpus(cpu);
+			break;
+		case 'g':
+			ret = get_available_governors(cpu);
+			break;
+		case 'p':
+			ret = get_policy(cpu);
+			break;
+		case 'd':
+			ret = get_driver(cpu);
+			break;
+		case 'l':
+			ret = get_hardware_limits(cpu);
+			break;
+		case 'w':
+			ret = get_freq_hardware(cpu, human);
+			break;
+		case 'f':
+			ret = get_freq_kernel(cpu, human);
+			break;
+		case 's':
+			ret = get_freq_stats(cpu, human);
+			break;
+		case 'y':
+			ret = get_latency(cpu, human);
+			break;
+		}
+		if (ret)
+			return ret;
+	}
+	return ret;
+}
diff --git a/tools/power/cpupower/utils/cpufreq-set.c b/tools/power/cpupower/utils/cpufreq-set.c
new file mode 100644
index 000000000000..5f783622bf31
--- /dev/null
+++ b/tools/power/cpupower/utils/cpufreq-set.c
@@ -0,0 +1,358 @@
+/*
+ *  (C) 2004-2009  Dominik Brodowski <linux@dominikbrodowski.de>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ */
+
+
+#include <unistd.h>
+#include <stdio.h>
+#include <errno.h>
+#include <stdlib.h>
+#include <limits.h>
+#include <string.h>
+#include <ctype.h>
+
+#include <getopt.h>
+
+#include "cpufreq.h"
+#include "helpers/helpers.h"
+
+#define NORM_FREQ_LEN 32
+
+void freq_set_help(void)
+{
+	printf(_("Usage: cpupower frequency-set [options]\n"));
+	printf(_("Options:\n"));
+	printf(_("  -d FREQ, --min FREQ      new minimum CPU frequency the governor may select\n"));
+	printf(_("  -u FREQ, --max FREQ      new maximum CPU frequency the governor may select\n"));
+	printf(_("  -g GOV, --governor GOV   new cpufreq governor\n"));
+	printf(_("  -f FREQ, --freq FREQ     specific frequency to be set. Requires userspace\n"
+	       "                           governor to be available and loaded\n"));
+	printf(_("  -r, --related            Switches all hardware-related CPUs\n"));
+	printf(_("  -h, --help               Prints out this screen\n"));
+	printf("\n");
+	printf(_("Notes:\n"
+	       "1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n"));
+	printf(_("2. The -f FREQ, --freq FREQ parameter cannot be combined with any other parameter\n"
+	       "   except the -c CPU, --cpu CPU parameter\n"
+	       "3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n"
+	       "   by postfixing the value with the wanted unit name, without any space\n"
+	       "   (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n"));
+
+}
+
+static struct option set_opts[] = {
+	{ .name = "min",	.has_arg = required_argument,	.flag = NULL,	.val = 'd'},
+	{ .name = "max",	.has_arg = required_argument,	.flag = NULL,	.val = 'u'},
+	{ .name = "governor",	.has_arg = required_argument,	.flag = NULL,	.val = 'g'},
+	{ .name = "freq",	.has_arg = required_argument,	.flag = NULL,	.val = 'f'},
+	{ .name = "help",	.has_arg = no_argument,		.flag = NULL,	.val = 'h'},
+	{ .name = "related",	.has_arg = no_argument,		.flag = NULL,	.val='r'},
+	{ },
+};
+
+static void print_error(void)
+{
+	printf(_("Error setting new values. Common errors:\n"
+			"- Do you have proper administration rights? (super-user?)\n"
+			"- Is the governor you requested available and modprobed?\n"
+			"- Trying to set an invalid policy?\n"
+			"- Trying to set a specific frequency, but userspace governor is not available,\n"
+			"   for example because of hardware which cannot be set to a specific frequency\n"
+			"   or because the userspace governor isn't loaded?\n"));
+};
+
+struct freq_units {
+	char		*str_unit;
+	int		power_of_ten;
+};
+
+const struct freq_units def_units[] = {
+	{"hz", -3},
+	{"khz", 0}, /* default */
+	{"mhz", 3},
+	{"ghz", 6},
+	{"thz", 9},
+	{NULL, 0}
+};
+
+static void print_unknown_arg(void)
+{
+	printf(_("invalid or unknown argument\n"));
+	freq_set_help();
+}
+
+static unsigned long string_to_frequency(const char *str)
+{
+	char normalized[NORM_FREQ_LEN];
+	const struct freq_units *unit;
+	const char *scan;
+	char *end;
+	unsigned long freq;
+	int power = 0, match_count = 0, i, cp, pad;
+
+	while (*str == '0')
+		str++;
+
+	for (scan = str; isdigit(*scan) || *scan == '.'; scan++) {
+		if (*scan == '.' && match_count == 0)
+			match_count = 1;
+		else if (*scan == '.' && match_count == 1)
+			return 0;
+	}
+
+	if (*scan) {
+		match_count = 0;
+		for (unit = def_units; unit->str_unit; unit++) {
+			for (i = 0;
+			     scan[i] && tolower(scan[i]) == unit->str_unit[i];
+			     ++i)
+				continue;
+			if (scan[i])
+				continue;
+			match_count++;
+			power = unit->power_of_ten;
+		}
+		if (match_count != 1)
+			return 0;
+	}
+
+	/* count the number of digits to be copied */
+	for (cp = 0; isdigit(str[cp]); cp++)
+		continue;
+
+	if (str[cp] == '.') {
+		while (power > -1 && isdigit(str[cp+1]))
+			cp++, power--;
+	}
+	if (power >= -1)	/* not enough => pad */
+		pad = power + 1;
+	else			/* to much => strip */
+		pad = 0, cp += power + 1;
+	/* check bounds */
+	if (cp <= 0 || cp + pad > NORM_FREQ_LEN - 1)
+		return 0;
+
+	/* copy digits */
+	for (i = 0; i < cp; i++, str++) {
+		if (*str == '.')
+			str++;
+		normalized[i] = *str;
+	}
+	/* and pad */
+	for (; i < cp + pad; i++)
+		normalized[i] = '0';
+
+	/* round up, down ? */
+	match_count = (normalized[i-1] >= '5');
+	/* and drop the decimal part */
+	normalized[i-1] = 0; /* cp > 0 && pad >= 0 ==> i > 0 */
+
+	/* final conversion (and applying rounding) */
+	errno = 0;
+	freq = strtoul(normalized, &end, 10);
+	if (errno)
+		return 0;
+	else {
+		if (match_count && freq != ULONG_MAX)
+			freq++;
+		return freq;
+	}
+}
+
+static int do_new_policy(unsigned int cpu, struct cpufreq_policy *new_pol)
+{
+	struct cpufreq_policy *cur_pol = cpufreq_get_policy(cpu);
+	int ret;
+
+	if (!cur_pol) {
+		printf(_("wrong, unknown or unhandled CPU?\n"));
+		return -EINVAL;
+	}
+
+	if (!new_pol->min)
+		new_pol->min = cur_pol->min;
+
+	if (!new_pol->max)
+		new_pol->max = cur_pol->max;
+
+	if (!new_pol->governor)
+		new_pol->governor = cur_pol->governor;
+
+	ret = cpufreq_set_policy(cpu, new_pol);
+
+	cpufreq_put_policy(cur_pol);
+
+	return ret;
+}
+
+
+static int do_one_cpu(unsigned int cpu, struct cpufreq_policy *new_pol,
+		unsigned long freq, unsigned int pc)
+{
+	switch (pc) {
+	case 0:
+		return cpufreq_set_frequency(cpu, freq);
+
+	case 1:
+		/* if only one value of a policy is to be changed, we can
+		 * use a "fast path".
+		 */
+		if (new_pol->min)
+			return cpufreq_modify_policy_min(cpu, new_pol->min);
+		else if (new_pol->max)
+			return cpufreq_modify_policy_max(cpu, new_pol->max);
+		else if (new_pol->governor)
+			return cpufreq_modify_policy_governor(cpu,
+							new_pol->governor);
+
+	default:
+		/* slow path */
+		return do_new_policy(cpu, new_pol);
+	}
+}
+
+int cmd_freq_set(int argc, char **argv)
+{
+	extern char *optarg;
+	extern int optind, opterr, optopt;
+	int ret = 0, cont = 1;
+	int double_parm = 0, related = 0, policychange = 0;
+	unsigned long freq = 0;
+	char gov[20];
+	unsigned int cpu;
+
+	struct cpufreq_policy new_pol = {
+		.min = 0,
+		.max = 0,
+		.governor = NULL,
+	};
+
+	/* parameter parsing */
+	do {
+		ret = getopt_long(argc, argv, "d:u:g:f:hr", set_opts, NULL);
+		switch (ret) {
+		case '?':
+			print_unknown_arg();
+			return -EINVAL;
+		case 'h':
+			freq_set_help();
+			return 0;
+		case -1:
+			cont = 0;
+			break;
+		case 'r':
+			if (related)
+				double_parm++;
+			related++;
+			break;
+		case 'd':
+			if (new_pol.min)
+				double_parm++;
+			policychange++;
+			new_pol.min = string_to_frequency(optarg);
+			if (new_pol.min == 0) {
+				print_unknown_arg();
+				return -EINVAL;
+			}
+			break;
+		case 'u':
+			if (new_pol.max)
+				double_parm++;
+			policychange++;
+			new_pol.max = string_to_frequency(optarg);
+			if (new_pol.max == 0) {
+				print_unknown_arg();
+				return -EINVAL;
+			}
+			break;
+		case 'f':
+			if (freq)
+				double_parm++;
+			freq = string_to_frequency(optarg);
+			if (freq == 0) {
+				print_unknown_arg();
+				return -EINVAL;
+			}
+			break;
+		case 'g':
+			if (new_pol.governor)
+				double_parm++;
+			policychange++;
+			if ((strlen(optarg) < 3) || (strlen(optarg) > 18)) {
+				print_unknown_arg();
+				return -EINVAL;
+			}
+			if ((sscanf(optarg, "%s", gov)) != 1) {
+				print_unknown_arg();
+				return -EINVAL;
+			}
+			new_pol.governor = gov;
+			break;
+		}
+	} while (cont);
+
+	/* parameter checking */
+	if (double_parm) {
+		printf("the same parameter was passed more than once\n");
+		return -EINVAL;
+	}
+
+	if (freq && policychange) {
+		printf(_("the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n"
+				"-g/--governor parameters\n"));
+		return -EINVAL;
+	}
+
+	if (!freq && !policychange) {
+		printf(_("At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n"
+				"-g/--governor must be passed\n"));
+		return -EINVAL;
+	}
+
+	/* Default is: set all CPUs */
+	if (bitmask_isallclear(cpus_chosen))
+		bitmask_setall(cpus_chosen);
+
+	/* Also set frequency settings for related CPUs if -r is passed */
+	if (related) {
+		for (cpu = bitmask_first(cpus_chosen);
+		     cpu <= bitmask_last(cpus_chosen); cpu++) {
+			struct cpufreq_affected_cpus *cpus;
+
+			if (!bitmask_isbitset(cpus_chosen, cpu) ||
+			    cpufreq_cpu_exists(cpu))
+				continue;
+
+			cpus = cpufreq_get_related_cpus(cpu);
+			if (!cpus)
+				break;
+			while (cpus->next) {
+				bitmask_setbit(cpus_chosen, cpus->cpu);
+				cpus = cpus->next;
+			}
+			cpufreq_put_related_cpus(cpus);
+		}
+	}
+
+
+	/* loop over CPUs */
+	for (cpu = bitmask_first(cpus_chosen);
+	     cpu <= bitmask_last(cpus_chosen); cpu++) {
+
+		if (!bitmask_isbitset(cpus_chosen, cpu) ||
+		    cpufreq_cpu_exists(cpu))
+			continue;
+
+		printf(_("Setting cpu: %d\n"), cpu);
+		ret = do_one_cpu(cpu, &new_pol, freq, policychange);
+		if (ret)
+			break;
+	}
+
+	if (ret)
+		print_error();
+
+	return ret;
+}
diff --git a/tools/power/cpupower/utils/cpuidle-info.c b/tools/power/cpupower/utils/cpuidle-info.c
new file mode 100644
index 000000000000..70da3574f1e9
--- /dev/null
+++ b/tools/power/cpupower/utils/cpuidle-info.c
@@ -0,0 +1,244 @@
+/*
+ *  (C) 2004-2009  Dominik Brodowski <linux@dominikbrodowski.de>
+ *  (C) 2010       Thomas Renninger <trenn@suse.de>
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ */
+
+
+#include <unistd.h>
+#include <stdio.h>
+#include <errno.h>
+#include <stdlib.h>
+#include <string.h>
+#include <getopt.h>
+#include <cpufreq.h>
+
+#include "helpers/helpers.h"
+#include "helpers/sysfs.h"
+#include "helpers/bitmask.h"
+
+#define LINE_LEN 10
+
+static void cpuidle_cpu_output(unsigned int cpu, int verbose)
+{
+	int idlestates, idlestate;
+	char *tmp;
+
+	printf(_ ("Analyzing CPU %d:\n"), cpu);
+
+	idlestates = sysfs_get_idlestate_count(cpu);
+	if (idlestates == 0) {
+		printf(_("CPU %u: No idle states\n"), cpu);
+		return;
+	} else if (idlestates <= 0) {
+		printf(_("CPU %u: Can't read idle state info\n"), cpu);
+		return;
+	}
+	tmp = sysfs_get_idlestate_name(cpu, idlestates - 1);
+	if (!tmp) {
+		printf(_("Could not determine max idle state %u\n"),
+		       idlestates - 1);
+		return;
+	}
+
+	printf(_("Number of idle states: %d\n"), idlestates);
+
+	printf(_("Available idle states:"));
+	for (idlestate = 1; idlestate < idlestates; idlestate++) {
+		tmp = sysfs_get_idlestate_name(cpu, idlestate);
+		if (!tmp)
+			continue;
+		printf(" %s", tmp);
+		free(tmp);
+	}
+	printf("\n");
+
+	if (!verbose)
+		return;
+
+	for (idlestate = 1; idlestate < idlestates; idlestate++) {
+		tmp = sysfs_get_idlestate_name(cpu, idlestate);
+		if (!tmp)
+			continue;
+		printf("%s:\n", tmp);
+		free(tmp);
+
+		tmp = sysfs_get_idlestate_desc(cpu, idlestate);
+		if (!tmp)
+			continue;
+		printf(_("Flags/Description: %s\n"), tmp);
+		free(tmp);
+
+		printf(_("Latency: %lu\n"),
+		       sysfs_get_idlestate_latency(cpu, idlestate));
+		printf(_("Usage: %lu\n"),
+		       sysfs_get_idlestate_usage(cpu, idlestate));
+		printf(_("Duration: %llu\n"),
+		       sysfs_get_idlestate_time(cpu, idlestate));
+	}
+	printf("\n");
+}
+
+static void cpuidle_general_output(void)
+{
+	char *tmp;
+
+	tmp = sysfs_get_cpuidle_driver();
+	if (!tmp) {
+		printf(_("Could not determine cpuidle driver\n"));
+		return;
+	}
+
+	printf(_("CPUidle driver: %s\n"), tmp);
+	free(tmp);
+
+	tmp = sysfs_get_cpuidle_governor();
+	if (!tmp) {
+		printf(_("Could not determine cpuidle governor\n"));
+		return;
+	}
+
+	printf(_("CPUidle governor: %s\n"), tmp);
+	free(tmp);
+}
+
+static void proc_cpuidle_cpu_output(unsigned int cpu)
+{
+	long max_allowed_cstate = 2000000000;
+	int cstates, cstate;
+
+	cstates = sysfs_get_idlestate_count(cpu);
+	if (cstates == 0) {
+		/*
+		 * Go on and print same useless info as you'd see with
+		 * cat /proc/acpi/processor/../power
+		 *	printf(_("CPU %u: No C-states available\n"), cpu);
+		 *	return;
+		 */
+	} else if (cstates <= 0) {
+		printf(_("CPU %u: Can't read C-state info\n"), cpu);
+		return;
+	}
+	/* printf("Cstates: %d\n", cstates); */
+
+	printf(_("active state:            C0\n"));
+	printf(_("max_cstate:              C%u\n"), cstates-1);
+	printf(_("maximum allowed latency: %lu usec\n"), max_allowed_cstate);
+	printf(_("states:\t\n"));
+	for (cstate = 1; cstate < cstates; cstate++) {
+		printf(_("    C%d:                  "
+			 "type[C%d] "), cstate, cstate);
+		printf(_("promotion[--] demotion[--] "));
+		printf(_("latency[%03lu] "),
+		       sysfs_get_idlestate_latency(cpu, cstate));
+		printf(_("usage[%08lu] "),
+		       sysfs_get_idlestate_usage(cpu, cstate));
+		printf(_("duration[%020Lu] \n"),
+		       sysfs_get_idlestate_time(cpu, cstate));
+	}
+}
+
+/* --freq / -f */
+
+void idle_info_help(void)
+{
+	printf(_ ("Usage: cpupower idleinfo [options]\n"));
+	printf(_ ("Options:\n"));
+	printf(_ ("  -s, --silent         Only show general C-state information\n"));
+	printf(_ ("  -o, --proc           Prints out information like provided by the /proc/acpi/processor/*/power\n"
+	       "                       interface in older kernels\n"));
+	printf(_ ("  -h, --help           Prints out this screen\n"));
+
+	printf("\n");
+}
+
+static struct option info_opts[] = {
+	{ .name = "silent",	.has_arg = no_argument,	.flag = NULL,	.val = 's'},
+	{ .name = "proc",	.has_arg = no_argument,	.flag = NULL,	.val = 'o'},
+	{ .name = "help",	.has_arg = no_argument,	.flag = NULL,	.val = 'h'},
+	{ },
+};
+
+static inline void cpuidle_exit(int fail)
+{
+	idle_info_help();
+	exit(EXIT_FAILURE);
+}
+
+int cmd_idle_info(int argc, char **argv)
+{
+	extern char *optarg;
+	extern int optind, opterr, optopt;
+	int ret = 0, cont = 1, output_param = 0, verbose = 1;
+	unsigned int cpu = 0;
+
+	do {
+		ret = getopt_long(argc, argv, "hos", info_opts, NULL);
+		if (ret == -1)
+			break;
+		switch (ret) {
+		case '?':
+			output_param = '?';
+			cont = 0;
+			break;
+		case 'h':
+			output_param = 'h';
+			cont = 0;
+			break;
+		case 's':
+			verbose = 0;
+			break;
+		case -1:
+			cont = 0;
+			break;
+		case 'o':
+			if (output_param) {
+				output_param = -1;
+				cont = 0;
+				break;
+			}
+			output_param = ret;
+			break;
+		}
+	} while (cont);
+
+	switch (output_param) {
+	case -1:
+		printf(_("You can't specify more than one "
+			 "output-specific argument\n"));
+		cpuidle_exit(EXIT_FAILURE);
+	case '?':
+		printf(_("invalid or unknown argument\n"));
+		cpuidle_exit(EXIT_FAILURE);
+	case 'h':
+		cpuidle_exit(EXIT_SUCCESS);
+	}
+
+	/* Default is: show output of CPU 0 only */
+	if (bitmask_isallclear(cpus_chosen))
+		bitmask_setbit(cpus_chosen, 0);
+
+	if (output_param == 0)
+		cpuidle_general_output();
+
+	for (cpu = bitmask_first(cpus_chosen);
+	     cpu <= bitmask_last(cpus_chosen); cpu++) {
+
+		if (!bitmask_isbitset(cpus_chosen, cpu) ||
+		    cpufreq_cpu_exists(cpu))
+			continue;
+
+		switch (output_param) {
+
+		case 'o':
+			proc_cpuidle_cpu_output(cpu);
+			break;
+		case 0:
+			printf("\n");
+			cpuidle_cpu_output(cpu, verbose);
+			break;
+		}
+	}
+	return EXIT_SUCCESS;
+}
diff --git a/tools/power/cpupower/utils/cpupower-info.c b/tools/power/cpupower/utils/cpupower-info.c
new file mode 100644
index 000000000000..85253cb7600e
--- /dev/null
+++ b/tools/power/cpupower/utils/cpupower-info.c
@@ -0,0 +1,153 @@
+/*
+ *  (C) 2011 Thomas Renninger <trenn@suse.de>, Novell Inc.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ */
+
+
+#include <unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <string.h>
+#include <getopt.h>
+
+#include <cpufreq.h>
+#include "helpers/helpers.h"
+#include "helpers/sysfs.h"
+
+void info_help(void)
+{
+	printf(_("Usage: cpupower info [ -b ] [ -m ] [ -s ]\n"));
+	printf(_("Options:\n"));
+	printf(_("  -b, --perf-bias    Gets CPU's power vs performance policy on some\n"
+	       "                           Intel models [0-15], see manpage for details\n"));
+	printf(_("  -m, --sched-mc     Gets the kernel's multi core scheduler policy.\n"));
+	printf(_("  -s, --sched-smt    Gets the kernel's thread sibling scheduler policy.\n"));
+	printf(_("  -h, --help               Prints out this screen\n"));
+	printf(_("\nPassing no option will show all info, by default only on core 0\n"));
+	printf("\n");
+}
+
+static struct option set_opts[] = {
+	{ .name = "perf-bias",	.has_arg = optional_argument,	.flag = NULL,	.val = 'b'},
+	{ .name = "sched-mc",	.has_arg = optional_argument,	.flag = NULL,	.val = 'm'},
+	{ .name = "sched-smt",	.has_arg = optional_argument,	.flag = NULL,	.val = 's'},
+	{ .name = "help",	.has_arg = no_argument,		.flag = NULL,	.val = 'h'},
+	{ },
+};
+
+static void print_wrong_arg_exit(void)
+{
+	printf(_("invalid or unknown argument\n"));
+	info_help();
+	exit(EXIT_FAILURE);
+}
+
+int cmd_info(int argc, char **argv)
+{
+	extern char *optarg;
+	extern int optind, opterr, optopt;
+	unsigned int cpu;
+
+	union {
+		struct {
+			int sched_mc:1;
+			int sched_smt:1;
+			int perf_bias:1;
+		};
+		int params;
+	} params = {};
+	int ret = 0;
+
+	setlocale(LC_ALL, "");
+	textdomain(PACKAGE);
+
+	/* parameter parsing */
+	while ((ret = getopt_long(argc, argv, "msbh", set_opts, NULL)) != -1) {
+		switch (ret) {
+		case 'h':
+			info_help();
+			return 0;
+		case 'b':
+			if (params.perf_bias)
+				print_wrong_arg_exit();
+			params.perf_bias = 1;
+			break;
+		case 'm':
+			if (params.sched_mc)
+				print_wrong_arg_exit();
+			params.sched_mc = 1;
+			break;
+		case 's':
+			if (params.sched_smt)
+				print_wrong_arg_exit();
+			params.sched_smt = 1;
+			break;
+		default:
+			print_wrong_arg_exit();
+		}
+	};
+
+	if (!params.params)
+		params.params = 0x7;
+
+	/* Default is: show output of CPU 0 only */
+	if (bitmask_isallclear(cpus_chosen))
+		bitmask_setbit(cpus_chosen, 0);
+
+	if (params.sched_mc) {
+		ret = sysfs_get_sched("mc");
+		printf(_("System's multi core scheduler setting: "));
+		if (ret < 0)
+			/* if sysfs file is missing it's: errno == ENOENT */
+			printf(_("not supported\n"));
+		else
+			printf("%d\n", ret);
+	}
+	if (params.sched_smt) {
+		ret = sysfs_get_sched("smt");
+		printf(_("System's thread sibling scheduler setting: "));
+		if (ret < 0)
+			/* if sysfs file is missing it's: errno == ENOENT */
+			printf(_("not supported\n"));
+		else
+			printf("%d\n", ret);
+	}
+
+	/* Add more per cpu options here */
+	if (!params.perf_bias)
+		return ret;
+
+	if (params.perf_bias) {
+		if (!run_as_root) {
+			params.perf_bias = 0;
+			printf(_("Intel's performance bias setting needs root privileges\n"));
+		} else if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_PERF_BIAS)) {
+			printf(_("System does not support Intel's performance"
+				 " bias setting\n"));
+			params.perf_bias = 0;
+		}
+	}
+
+	/* loop over CPUs */
+	for (cpu = bitmask_first(cpus_chosen);
+	     cpu <= bitmask_last(cpus_chosen); cpu++) {
+
+		if (!bitmask_isbitset(cpus_chosen, cpu) ||
+		    cpufreq_cpu_exists(cpu))
+			continue;
+
+		printf(_("analyzing CPU %d:\n"), cpu);
+
+		if (params.perf_bias) {
+			ret = msr_intel_get_perf_bias(cpu);
+			if (ret < 0) {
+				printf(_("Could not read perf-bias value\n"));
+				break;
+			} else
+				printf(_("perf-bias: %d\n"), ret);
+		}
+	}
+	return ret;
+}
diff --git a/tools/power/cpupower/utils/cpupower-set.c b/tools/power/cpupower/utils/cpupower-set.c
new file mode 100644
index 000000000000..bc1b391e46f0
--- /dev/null
+++ b/tools/power/cpupower/utils/cpupower-set.c
@@ -0,0 +1,153 @@
+/*
+ *  (C) 2011 Thomas Renninger <trenn@suse.de>, Novell Inc.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ */
+
+
+#include <unistd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <string.h>
+#include <getopt.h>
+
+#include <cpufreq.h>
+#include "helpers/helpers.h"
+#include "helpers/sysfs.h"
+#include "helpers/bitmask.h"
+
+void set_help(void)
+{
+	printf(_("Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n"));
+	printf(_("Options:\n"));
+	printf(_("  -b, --perf-bias [VAL]    Sets CPU's power vs performance policy on some\n"
+	       "                           Intel models [0-15], see manpage for details\n"));
+	printf(_("  -m, --sched-mc  [VAL]    Sets the kernel's multi core scheduler policy.\n"));
+	printf(_("  -s, --sched-smt [VAL]    Sets the kernel's thread sibling scheduler policy.\n"));
+	printf(_("  -h, --help               Prints out this screen\n"));
+	printf("\n");
+}
+
+static struct option set_opts[] = {
+	{ .name = "perf-bias",	.has_arg = optional_argument,	.flag = NULL,	.val = 'b'},
+	{ .name = "sched-mc",	.has_arg = optional_argument,	.flag = NULL,	.val = 'm'},
+	{ .name = "sched-smt",	.has_arg = optional_argument,	.flag = NULL,	.val = 's'},
+	{ .name = "help",	.has_arg = no_argument,		.flag = NULL,	.val = 'h'},
+	{ },
+};
+
+static void print_wrong_arg_exit(void)
+{
+	printf(_("invalid or unknown argument\n"));
+	set_help();
+	exit(EXIT_FAILURE);
+}
+
+int cmd_set(int argc, char **argv)
+{
+	extern char *optarg;
+	extern int optind, opterr, optopt;
+	unsigned int cpu;
+
+	union {
+		struct {
+			int sched_mc:1;
+			int sched_smt:1;
+			int perf_bias:1;
+		};
+		int params;
+	} params;
+	int sched_mc = 0, sched_smt = 0, perf_bias = 0;
+	int ret = 0;
+
+	setlocale(LC_ALL, "");
+	textdomain(PACKAGE);
+
+	params.params = 0;
+	/* parameter parsing */
+	while ((ret = getopt_long(argc, argv, "m:s:b:h",
+						set_opts, NULL)) != -1) {
+		switch (ret) {
+		case 'h':
+			set_help();
+			return 0;
+		case 'b':
+			if (params.perf_bias)
+				print_wrong_arg_exit();
+			perf_bias = atoi(optarg);
+			if (perf_bias < 0 || perf_bias > 15) {
+				printf(_("--perf-bias param out "
+					 "of range [0-%d]\n"), 15);
+				print_wrong_arg_exit();
+			}
+			params.perf_bias = 1;
+			break;
+		case 'm':
+			if (params.sched_mc)
+				print_wrong_arg_exit();
+			sched_mc = atoi(optarg);
+			if (sched_mc < 0 || sched_mc > 2) {
+				printf(_("--sched-mc param out "
+					 "of range [0-%d]\n"), 2);
+				print_wrong_arg_exit();
+			}
+			params.sched_mc = 1;
+			break;
+		case 's':
+			if (params.sched_smt)
+				print_wrong_arg_exit();
+			sched_smt = atoi(optarg);
+			if (sched_smt < 0 || sched_smt > 2) {
+				printf(_("--sched-smt param out "
+					 "of range [0-%d]\n"), 2);
+				print_wrong_arg_exit();
+			}
+			params.sched_smt = 1;
+			break;
+		default:
+			print_wrong_arg_exit();
+		}
+	};
+
+	if (!params.params) {
+		set_help();
+		return -EINVAL;
+	}
+
+	if (params.sched_mc) {
+		ret = sysfs_set_sched("mc", sched_mc);
+		if (ret)
+			fprintf(stderr, _("Error setting sched-mc %s\n"),
+				(ret == -ENODEV) ? "not supported" : "");
+	}
+	if (params.sched_smt) {
+		ret = sysfs_set_sched("smt", sched_smt);
+		if (ret)
+			fprintf(stderr, _("Error setting sched-smt %s\n"),
+				(ret == -ENODEV) ? "not supported" : "");
+	}
+
+	/* Default is: set all CPUs */
+	if (bitmask_isallclear(cpus_chosen))
+		bitmask_setall(cpus_chosen);
+
+	/* loop over CPUs */
+	for (cpu = bitmask_first(cpus_chosen);
+	     cpu <= bitmask_last(cpus_chosen); cpu++) {
+
+		if (!bitmask_isbitset(cpus_chosen, cpu) ||
+		    cpufreq_cpu_exists(cpu))
+			continue;
+
+		if (params.perf_bias) {
+			ret = msr_intel_set_perf_bias(cpu, perf_bias);
+			if (ret) {
+				fprintf(stderr, _("Error setting perf-bias "
+						  "value on CPU %d\n"), cpu);
+				break;
+			}
+		}
+	}
+	return ret;
+}
diff --git a/tools/power/cpupower/utils/cpupower.c b/tools/power/cpupower/utils/cpupower.c
new file mode 100644
index 000000000000..5844ae0f786f
--- /dev/null
+++ b/tools/power/cpupower/utils/cpupower.c
@@ -0,0 +1,203 @@
+/*
+ *  (C) 2010,2011       Thomas Renninger <trenn@suse.de>, Novell Inc.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  Ideas taken over from the perf userspace tool (included in the Linus
+ *  kernel git repo): subcommand builtins and param parsing.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#include "builtin.h"
+#include "helpers/helpers.h"
+#include "helpers/bitmask.h"
+
+struct cmd_struct {
+	const char *cmd;
+	int (*main)(int, const char **);
+	void (*usage)(void);
+	int needs_root;
+};
+
+#define ARRAY_SIZE(x) (sizeof(x)/sizeof(x[0]))
+
+int cmd_help(int argc, const char **argv);
+
+/* Global cpu_info object available for all binaries
+ * Info only retrieved from CPU 0
+ *
+ * Values will be zero/unknown on non X86 archs
+ */
+struct cpupower_cpu_info cpupower_cpu_info;
+int run_as_root;
+/* Affected cpus chosen by -c/--cpu param */
+struct bitmask *cpus_chosen;
+
+#ifdef DEBUG
+int be_verbose;
+#endif
+
+static void print_help(void);
+
+static struct cmd_struct commands[] = {
+	{ "frequency-info",	cmd_freq_info,	freq_info_help,	0	},
+	{ "frequency-set",	cmd_freq_set,	freq_set_help,	1	},
+	{ "idle-info",		cmd_idle_info,	idle_info_help,	0	},
+	{ "set",		cmd_set,	set_help,	1	},
+	{ "info",		cmd_info,	info_help,	0	},
+	{ "monitor",		cmd_monitor,	monitor_help,	0	},
+	{ "help",		cmd_help,	print_help,	0	},
+	/*	{ "bench",	cmd_bench,	NULL,		1	}, */
+};
+
+int cmd_help(int argc, const char **argv)
+{
+	unsigned int i;
+
+	if (argc > 1) {
+		for (i = 0; i < ARRAY_SIZE(commands); i++) {
+			struct cmd_struct *p = commands + i;
+			if (strcmp(p->cmd, argv[1]))
+				continue;
+			if (p->usage) {
+				p->usage();
+				return EXIT_SUCCESS;
+			}
+		}
+	}
+	print_help();
+	if (argc == 1)
+		return EXIT_SUCCESS; /* cpupower help */
+	return EXIT_FAILURE;
+}
+
+static void print_help(void)
+{
+	unsigned int i;
+
+#ifdef DEBUG
+	printf(_("cpupower [ -d ][ -c cpulist ] subcommand [ARGS]\n"));
+	printf(_("  -d, --debug      May increase output (stderr) on some subcommands\n"));
+#else
+	printf(_("cpupower [ -c cpulist ] subcommand [ARGS]\n"));
+#endif
+	printf(_("cpupower --version\n"));
+	printf(_("Supported subcommands are:\n"));
+	for (i = 0; i < ARRAY_SIZE(commands); i++)
+		printf("\t%s\n", commands[i].cmd);
+	printf(_("\nSome subcommands can make use of the -c cpulist option.\n"));
+	printf(_("Look at the general cpupower manpage how to use it\n"));
+	printf(_("and read up the subcommand's manpage whether it is supported.\n"));
+	printf(_("\nUse cpupower help subcommand for getting help for above subcommands.\n"));
+}
+
+static void print_version(void)
+{
+	printf(PACKAGE " " VERSION "\n");
+	printf(_("Report errors and bugs to %s, please.\n"), PACKAGE_BUGREPORT);
+}
+
+static void handle_options(int *argc, const char ***argv)
+{
+	int ret, x, new_argc = 0;
+
+	if (*argc < 1)
+		return;
+
+	for (x = 0;  x < *argc && ((*argv)[x])[0] == '-'; x++) {
+		const char *param = (*argv)[x];
+		if (!strcmp(param, "-h") || !strcmp(param, "--help")) {
+			print_help();
+			exit(EXIT_SUCCESS);
+		} else if (!strcmp(param, "-c") || !strcmp(param, "--cpu")) {
+			if (*argc < 2) {
+				print_help();
+				exit(EXIT_FAILURE);
+			}
+			if (!strcmp((*argv)[x+1], "all"))
+				bitmask_setall(cpus_chosen);
+			else {
+				ret = bitmask_parselist(
+						(*argv)[x+1], cpus_chosen);
+				if (ret < 0) {
+					fprintf(stderr, _("Error parsing cpu "
+							  "list\n"));
+					exit(EXIT_FAILURE);
+				}
+			}
+			x += 1;
+			/* Cut out param: cpupower -c 1 info -> cpupower info */
+			new_argc += 2;
+			continue;
+		} else if (!strcmp(param, "-v") ||
+			!strcmp(param, "--version")) {
+			print_version();
+			exit(EXIT_SUCCESS);
+#ifdef DEBUG
+		} else if (!strcmp(param, "-d") || !strcmp(param, "--debug")) {
+			be_verbose = 1;
+			new_argc++;
+			continue;
+#endif
+		} else {
+			fprintf(stderr, "Unknown option: %s\n", param);
+			print_help();
+			exit(EXIT_FAILURE);
+		}
+	}
+	*argc -= new_argc;
+	*argv += new_argc;
+}
+
+int main(int argc, const char *argv[])
+{
+	const char *cmd;
+	unsigned int i, ret;
+
+	cpus_chosen = bitmask_alloc(sysconf(_SC_NPROCESSORS_CONF));
+
+	argc--;
+	argv += 1;
+
+	handle_options(&argc, &argv);
+
+	cmd = argv[0];
+
+	if (argc < 1) {
+		print_help();
+		return EXIT_FAILURE;
+	}
+
+	setlocale(LC_ALL, "");
+	textdomain(PACKAGE);
+
+	/* Turn "perf cmd --help" into "perf help cmd" */
+	if (argc > 1 && !strcmp(argv[1], "--help")) {
+		argv[1] = argv[0];
+		argv[0] = cmd = "help";
+	}
+
+	get_cpu_info(0, &cpupower_cpu_info);
+	run_as_root = !getuid();
+
+	for (i = 0; i < ARRAY_SIZE(commands); i++) {
+		struct cmd_struct *p = commands + i;
+		if (strcmp(p->cmd, cmd))
+			continue;
+		if (!run_as_root && p->needs_root) {
+			fprintf(stderr, _("Subcommand %s needs root "
+					  "privileges\n"), cmd);
+			return EXIT_FAILURE;
+		}
+		ret = p->main(argc, argv);
+		if (cpus_chosen)
+			bitmask_free(cpus_chosen);
+		return ret;
+	}
+	print_help();
+	return EXIT_FAILURE;
+}
diff --git a/tools/power/cpupower/utils/helpers/amd.c b/tools/power/cpupower/utils/helpers/amd.c
new file mode 100644
index 000000000000..87d5605bdda8
--- /dev/null
+++ b/tools/power/cpupower/utils/helpers/amd.c
@@ -0,0 +1,137 @@
+#if defined(__i386__) || defined(__x86_64__)
+#include <unistd.h>
+#include <errno.h>
+#include <stdio.h>
+#include <stdint.h>
+
+#include <pci/pci.h>
+
+#include "helpers/helpers.h"
+
+#define MSR_AMD_PSTATE_STATUS	0xc0010063
+#define MSR_AMD_PSTATE		0xc0010064
+#define MSR_AMD_PSTATE_LIMIT	0xc0010061
+
+union msr_pstate {
+	struct {
+		unsigned fid:6;
+		unsigned did:3;
+		unsigned vid:7;
+		unsigned res1:6;
+		unsigned nbdid:1;
+		unsigned res2:2;
+		unsigned nbvid:7;
+		unsigned iddval:8;
+		unsigned idddiv:2;
+		unsigned res3:21;
+		unsigned en:1;
+	} bits;
+	unsigned long long val;
+};
+
+static int get_did(int family, union msr_pstate pstate)
+{
+	int t;
+
+	if (family == 0x12)
+		t = pstate.val & 0xf;
+	else
+		t = pstate.bits.did;
+
+	return t;
+}
+
+static int get_cof(int family, union msr_pstate pstate)
+{
+	int t;
+	int fid, did;
+
+	did = get_did(family, pstate);
+
+	t = 0x10;
+	fid = pstate.bits.fid;
+	if (family == 0x11)
+		t = 0x8;
+
+	return (100 * (fid + t)) >> did;
+}
+
+/* Needs:
+ * cpu          -> the cpu that gets evaluated
+ * cpu_family   -> The cpu's family (0x10, 0x12,...)
+ * boots_states -> how much boost states the machines support
+ *
+ * Fills up:
+ * pstates -> a pointer to an array of size MAX_HW_PSTATES
+ *            must be initialized with zeros.
+ *            All available  HW pstates (including boost states)
+ * no      -> amount of pstates above array got filled up with
+ *
+ * returns zero on success, -1 on failure
+ */
+int decode_pstates(unsigned int cpu, unsigned int cpu_family,
+		   int boost_states, unsigned long *pstates, int *no)
+{
+	int i, psmax, pscur;
+	union msr_pstate pstate;
+	unsigned long long val;
+
+	/* Only read out frequencies from HW when CPU might be boostable
+	   to keep the code as short and clean as possible.
+	   Otherwise frequencies are exported via ACPI tables.
+	*/
+	if (cpu_family < 0x10 || cpu_family == 0x14)
+		return -1;
+
+	if (read_msr(cpu, MSR_AMD_PSTATE_LIMIT, &val))
+		return -1;
+
+	psmax = (val >> 4) & 0x7;
+
+	if (read_msr(cpu, MSR_AMD_PSTATE_STATUS, &val))
+		return -1;
+
+	pscur = val & 0x7;
+
+	pscur += boost_states;
+	psmax += boost_states;
+	for (i = 0; i <= psmax; i++) {
+		if (i >= MAX_HW_PSTATES) {
+			fprintf(stderr, "HW pstates [%d] exceeding max [%d]\n",
+				psmax, MAX_HW_PSTATES);
+			return -1;
+		}
+		if (read_msr(cpu, MSR_AMD_PSTATE + i, &pstate.val))
+			return -1;
+		pstates[i] = get_cof(cpu_family, pstate);
+	}
+	*no = i;
+	return 0;
+}
+
+int amd_pci_get_num_boost_states(int *active, int *states)
+{
+	struct pci_access *pci_acc;
+	int vendor_id = 0x1022;
+	int boost_dev_ids[4] = {0x1204, 0x1604, 0x1704, 0};
+	struct pci_dev *device;
+	uint8_t val = 0;
+
+	*active = *states = 0;
+
+	device = pci_acc_init(&pci_acc, vendor_id, boost_dev_ids);
+
+	if (device == NULL)
+		return -ENODEV;
+
+	val = pci_read_byte(device, 0x15c);
+	if (val & 3)
+		*active = 1;
+	else
+		*active = 0;
+	*states = (val >> 2) & 7;
+
+	pci_cleanup(pci_acc);
+	return 0;
+}
+#endif /* defined(__i386__) || defined(__x86_64__) */
diff --git a/tools/power/cpupower/utils/helpers/bitmask.c b/tools/power/cpupower/utils/helpers/bitmask.c
new file mode 100644
index 000000000000..5c074c60f904
--- /dev/null
+++ b/tools/power/cpupower/utils/helpers/bitmask.c
@@ -0,0 +1,292 @@
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <helpers/bitmask.h>
+
+/* How many bits in an unsigned long */
+#define bitsperlong (8 * sizeof(unsigned long))
+
+/* howmany(a,b) : how many elements of size b needed to hold all of a */
+#define howmany(x, y) (((x)+((y)-1))/(y))
+
+/* How many longs in mask of n bits */
+#define longsperbits(n) howmany(n, bitsperlong)
+
+#define max(a, b) ((a) > (b) ? (a) : (b))
+
+/*
+ * Allocate and free `struct bitmask *`
+ */
+
+/* Allocate a new `struct bitmask` with a size of n bits */
+struct bitmask *bitmask_alloc(unsigned int n)
+{
+	struct bitmask *bmp;
+
+	bmp = malloc(sizeof(*bmp));
+	if (bmp == 0)
+		return 0;
+	bmp->size = n;
+	bmp->maskp = calloc(longsperbits(n), sizeof(unsigned long));
+	if (bmp->maskp == 0) {
+		free(bmp);
+		return 0;
+	}
+	return bmp;
+}
+
+/* Free `struct bitmask` */
+void bitmask_free(struct bitmask *bmp)
+{
+	if (bmp == 0)
+		return;
+	free(bmp->maskp);
+	bmp->maskp = (unsigned long *)0xdeadcdef;  /* double free tripwire */
+	free(bmp);
+}
+
+/*
+ * The routines _getbit() and _setbit() are the only
+ * routines that actually understand the layout of bmp->maskp[].
+ *
+ * On little endian architectures, this could simply be an array of
+ * bytes.  But the kernel layout of bitmasks _is_ visible to userspace
+ * via the sched_(set/get)affinity calls in Linux 2.6, and on big
+ * endian architectures, it is painfully obvious that this is an
+ * array of unsigned longs.
+ */
+
+/* Return the value (0 or 1) of bit n in bitmask bmp */
+static unsigned int _getbit(const struct bitmask *bmp, unsigned int n)
+{
+	if (n < bmp->size)
+		return (bmp->maskp[n/bitsperlong] >> (n % bitsperlong)) & 1;
+	else
+		return 0;
+}
+
+/* Set bit n in bitmask bmp to value v (0 or 1) */
+static void _setbit(struct bitmask *bmp, unsigned int n, unsigned int v)
+{
+	if (n < bmp->size) {
+		if (v)
+			bmp->maskp[n/bitsperlong] |= 1UL << (n % bitsperlong);
+		else
+			bmp->maskp[n/bitsperlong] &=
+				~(1UL << (n % bitsperlong));
+	}
+}
+
+/*
+ * When parsing bitmask lists, only allow numbers, separated by one
+ * of the allowed next characters.
+ *
+ * The parameter 'sret' is the return from a sscanf "%u%c".  It is
+ * -1 if the sscanf input string was empty.  It is 0 if the first
+ * character in the sscanf input string was not a decimal number.
+ * It is 1 if the unsigned number matching the "%u" was the end of the
+ * input string.  It is 2 if one or more additional characters followed
+ * the matched unsigned number.  If it is 2, then 'nextc' is the first
+ * character following the number.  The parameter 'ok_next_chars'
+ * is the nul-terminated list of allowed next characters.
+ *
+ * The mask term just scanned was ok if and only if either the numbers
+ * matching the %u were all of the input or if the next character in
+ * the input past the numbers was one of the allowed next characters.
+ */
+static int scan_was_ok(int sret, char nextc, const char *ok_next_chars)
+{
+	return sret == 1 ||
+		(sret == 2 && strchr(ok_next_chars, nextc) != NULL);
+}
+
+static const char *nexttoken(const char *q,  int sep)
+{
+	if (q)
+		q = strchr(q, sep);
+	if (q)
+		q++;
+	return q;
+}
+
+/* Set a single bit i in bitmask */
+struct bitmask *bitmask_setbit(struct bitmask *bmp, unsigned int i)
+{
+	_setbit(bmp, i, 1);
+	return bmp;
+}
+
+/* Set all bits in bitmask: bmp = ~0 */
+struct bitmask *bitmask_setall(struct bitmask *bmp)
+{
+	unsigned int i;
+	for (i = 0; i < bmp->size; i++)
+		_setbit(bmp, i, 1);
+	return bmp;
+}
+
+/* Clear all bits in bitmask: bmp = 0 */
+struct bitmask *bitmask_clearall(struct bitmask *bmp)
+{
+	unsigned int i;
+	for (i = 0; i < bmp->size; i++)
+		_setbit(bmp, i, 0);
+	return bmp;
+}
+
+/* True if all bits are clear */
+int bitmask_isallclear(const struct bitmask *bmp)
+{
+	unsigned int i;
+	for (i = 0; i < bmp->size; i++)
+		if (_getbit(bmp, i))
+			return 0;
+	return 1;
+}
+
+/* True if specified bit i is set */
+int bitmask_isbitset(const struct bitmask *bmp, unsigned int i)
+{
+	return _getbit(bmp, i);
+}
+
+/* Number of lowest set bit (min) */
+unsigned int bitmask_first(const struct bitmask *bmp)
+{
+	return bitmask_next(bmp, 0);
+}
+
+/* Number of highest set bit (max) */
+unsigned int bitmask_last(const struct bitmask *bmp)
+{
+	unsigned int i;
+	unsigned int m = bmp->size;
+	for (i = 0; i < bmp->size; i++)
+		if (_getbit(bmp, i))
+			m = i;
+	return m;
+}
+
+/* Number of next set bit at or above given bit i */
+unsigned int bitmask_next(const struct bitmask *bmp, unsigned int i)
+{
+	unsigned int n;
+	for (n = i; n < bmp->size; n++)
+		if (_getbit(bmp, n))
+			break;
+	return n;
+}
+
+/*
+ * Parses a comma-separated list of numbers and ranges of numbers,
+ * with optional ':%u' strides modifying ranges, into provided bitmask.
+ * Some examples of input lists and their equivalent simple list:
+ *	Input		Equivalent to
+ *	0-3		0,1,2,3
+ *	0-7:2		0,2,4,6
+ *	1,3,5-7		1,3,5,6,7
+ *	0-3:2,8-15:4	0,2,8,12
+ */
+int bitmask_parselist(const char *buf, struct bitmask *bmp)
+{
+	const char *p, *q;
+
+	bitmask_clearall(bmp);
+
+	q = buf;
+	while (p = q, q = nexttoken(q, ','), p) {
+		unsigned int a;		/* begin of range */
+		unsigned int b;		/* end of range */
+		unsigned int s;		/* stride */
+		const char *c1, *c2;	/* next tokens after '-' or ',' */
+		char nextc;		/* char after sscanf %u match */
+		int sret;		/* sscanf return (number of matches) */
+
+		sret = sscanf(p, "%u%c", &a, &nextc);
+		if (!scan_was_ok(sret, nextc, ",-"))
+			goto err;
+		b = a;
+		s = 1;
+		c1 = nexttoken(p, '-');
+		c2 = nexttoken(p, ',');
+		if (c1 != NULL && (c2 == NULL || c1 < c2)) {
+			sret = sscanf(c1, "%u%c", &b, &nextc);
+			if (!scan_was_ok(sret, nextc, ",:"))
+				goto err;
+			c1 = nexttoken(c1, ':');
+			if (c1 != NULL && (c2 == NULL || c1 < c2)) {
+				sret = sscanf(c1, "%u%c", &s, &nextc);
+				if (!scan_was_ok(sret, nextc, ","))
+					goto err;
+			}
+		}
+		if (!(a <= b))
+			goto err;
+		if (b >= bmp->size)
+			goto err;
+		while (a <= b) {
+			_setbit(bmp, a, 1);
+			a += s;
+		}
+	}
+	return 0;
+err:
+	bitmask_clearall(bmp);
+	return -1;
+}
+
+/*
+ * emit(buf, buflen, rbot, rtop, len)
+ *
+ * Helper routine for bitmask_displaylist().  Write decimal number
+ * or range to buf+len, suppressing output past buf+buflen, with optional
+ * comma-prefix.  Return len of what would be written to buf, if it
+ * all fit.
+ */
+
+static inline int emit(char *buf, int buflen, int rbot, int rtop, int len)
+{
+	if (len > 0)
+		len += snprintf(buf + len, max(buflen - len, 0), ",");
+	if (rbot == rtop)
+		len += snprintf(buf + len, max(buflen - len, 0), "%d", rbot);
+	else
+		len += snprintf(buf + len, max(buflen - len, 0), "%d-%d",
+				rbot, rtop);
+	return len;
+}
+
+/*
+ * Write decimal list representation of bmp to buf.
+ *
+ * Output format is a comma-separated list of decimal numbers and
+ * ranges.  Consecutively set bits are shown as two hyphen-separated
+ * decimal numbers, the smallest and largest bit numbers set in
+ * the range.  Output format is compatible with the format
+ * accepted as input by bitmap_parselist().
+ *
+ * The return value is the number of characters which would be
+ * generated for the given input, excluding the trailing '\0', as
+ * per ISO C99.
+ */
+
+int bitmask_displaylist(char *buf, int buflen, const struct bitmask *bmp)
+{
+	int len = 0;
+	/* current bit is 'cur', most recently seen range is [rbot, rtop] */
+	unsigned int cur, rbot, rtop;
+
+	if (buflen > 0)
+		*buf = 0;
+	rbot = cur = bitmask_first(bmp);
+	while (cur < bmp->size) {
+		rtop = cur;
+		cur = bitmask_next(bmp, cur+1);
+		if (cur >= bmp->size || cur > rtop + 1) {
+			len = emit(buf, buflen, rbot, rtop, len);
+			rbot = cur;
+		}
+	}
+	return len;
+}
diff --git a/tools/power/cpupower/utils/helpers/bitmask.h b/tools/power/cpupower/utils/helpers/bitmask.h
new file mode 100644
index 000000000000..eb289df41053
--- /dev/null
+++ b/tools/power/cpupower/utils/helpers/bitmask.h
@@ -0,0 +1,33 @@
+#ifndef __CPUPOWER_BITMASK__
+#define __CPUPOWER_BITMASK__
+
+/* Taken over from libbitmask, a project initiated from sgi:
+ * Url:            http://oss.sgi.com/projects/cpusets/
+ * Unfortunately it's not very widespread, therefore relevant parts are
+ * pasted here.
+ */
+
+struct bitmask {
+	unsigned int size;
+	unsigned long *maskp;
+};
+
+struct bitmask *bitmask_alloc(unsigned int n);
+void bitmask_free(struct bitmask *bmp);
+
+struct bitmask *bitmask_setbit(struct bitmask *bmp, unsigned int i);
+struct bitmask *bitmask_setall(struct bitmask *bmp);
+struct bitmask *bitmask_clearall(struct bitmask *bmp);
+
+unsigned int bitmask_first(const struct bitmask *bmp);
+unsigned int bitmask_next(const struct bitmask *bmp, unsigned int i);
+unsigned int bitmask_last(const struct bitmask *bmp);
+int bitmask_isallclear(const struct bitmask *bmp);
+int bitmask_isbitset(const struct bitmask *bmp, unsigned int i);
+
+int bitmask_parselist(const char *buf, struct bitmask *bmp);
+int bitmask_displaylist(char *buf, int len, const struct bitmask *bmp);
+
+
+
+#endif /*__CPUPOWER_BITMASK__ */
diff --git a/tools/power/cpupower/utils/helpers/cpuid.c b/tools/power/cpupower/utils/helpers/cpuid.c
new file mode 100644
index 000000000000..906895d21cce
--- /dev/null
+++ b/tools/power/cpupower/utils/helpers/cpuid.c
@@ -0,0 +1,176 @@
+#include <stdio.h>
+#include <errno.h>
+#include <string.h>
+#include <unistd.h>
+#include <stdlib.h>
+
+#include "helpers/helpers.h"
+
+static const char *cpu_vendor_table[X86_VENDOR_MAX] = {
+	"Unknown", "GenuineIntel", "AuthenticAMD",
+};
+
+#if defined(__i386__) || defined(__x86_64__)
+
+/* from gcc */
+#include <cpuid.h>
+
+/*
+ * CPUID functions returning a single datum
+ *
+ * Define unsigned int cpuid_e[abcd]x(unsigned int op)
+ */
+#define cpuid_func(reg)					\
+	unsigned int cpuid_##reg(unsigned int op)	\
+	{						\
+	unsigned int eax, ebx, ecx, edx;		\
+	__cpuid(op, eax, ebx, ecx, edx);		\
+	return reg;					\
+	}
+cpuid_func(eax);
+cpuid_func(ebx);
+cpuid_func(ecx);
+cpuid_func(edx);
+
+#endif /* defined(__i386__) || defined(__x86_64__) */
+
+/* get_cpu_info
+ *
+ * Extract CPU vendor, family, model, stepping info from /proc/cpuinfo
+ *
+ * Returns 0 on success or a negativ error code
+ *
+ * TBD: Should there be a cpuid alternative for this if /proc is not mounted?
+ */
+int get_cpu_info(unsigned int cpu, struct cpupower_cpu_info *cpu_info)
+{
+	FILE *fp;
+	char value[64];
+	unsigned int proc, x;
+	unsigned int unknown = 0xffffff;
+	unsigned int cpuid_level, ext_cpuid_level;
+
+	int ret = -EINVAL;
+
+	cpu_info->vendor		= X86_VENDOR_UNKNOWN;
+	cpu_info->family		= unknown;
+	cpu_info->model			= unknown;
+	cpu_info->stepping		= unknown;
+	cpu_info->caps			= 0;
+
+	fp = fopen("/proc/cpuinfo", "r");
+	if (!fp)
+		return -EIO;
+
+	while (!feof(fp)) {
+		if (!fgets(value, 64, fp))
+			continue;
+		value[63 - 1] = '\0';
+
+		if (!strncmp(value, "processor\t: ", 12))
+			sscanf(value, "processor\t: %u", &proc);
+
+		if (proc != cpu)
+			continue;
+
+		/* Get CPU vendor */
+		if (!strncmp(value, "vendor_id", 9)) {
+			for (x = 1; x < X86_VENDOR_MAX; x++) {
+				if (strstr(value, cpu_vendor_table[x]))
+					cpu_info->vendor = x;
+			}
+		/* Get CPU family, etc. */
+		} else if (!strncmp(value, "cpu family\t: ", 13)) {
+			sscanf(value, "cpu family\t: %u",
+			       &cpu_info->family);
+		} else if (!strncmp(value, "model\t\t: ", 9)) {
+			sscanf(value, "model\t\t: %u",
+			       &cpu_info->model);
+		} else if (!strncmp(value, "stepping\t: ", 10)) {
+			sscanf(value, "stepping\t: %u",
+			       &cpu_info->stepping);
+
+			/* Exit -> all values must have been set */
+			if (cpu_info->vendor == X86_VENDOR_UNKNOWN ||
+			    cpu_info->family == unknown ||
+			    cpu_info->model == unknown ||
+			    cpu_info->stepping == unknown) {
+				ret = -EINVAL;
+				goto out;
+			}
+
+			ret = 0;
+			goto out;
+		}
+	}
+	ret = -ENODEV;
+out:
+	fclose(fp);
+	/* Get some useful CPU capabilities from cpuid */
+	if (cpu_info->vendor != X86_VENDOR_AMD &&
+	    cpu_info->vendor != X86_VENDOR_INTEL)
+		return ret;
+
+	cpuid_level	= cpuid_eax(0);
+	ext_cpuid_level	= cpuid_eax(0x80000000);
+
+	/* Invariant TSC */
+	if (ext_cpuid_level >= 0x80000007 &&
+	    (cpuid_edx(0x80000007) & (1 << 8)))
+		cpu_info->caps |= CPUPOWER_CAP_INV_TSC;
+
+	/* Aperf/Mperf registers support */
+	if (cpuid_level >= 6 && (cpuid_ecx(6) & 0x1))
+		cpu_info->caps |= CPUPOWER_CAP_APERF;
+
+	/* AMD Boost state enable/disable register */
+	if (cpu_info->vendor == X86_VENDOR_AMD) {
+		if (ext_cpuid_level >= 0x80000007 &&
+		    (cpuid_edx(0x80000007) & (1 << 9)))
+			cpu_info->caps |= CPUPOWER_CAP_AMD_CBP;
+	}
+
+	if (cpu_info->vendor == X86_VENDOR_INTEL) {
+		if (cpuid_level >= 6 &&
+		    (cpuid_eax(6) & (1 << 1)))
+			cpu_info->caps |= CPUPOWER_CAP_INTEL_IDA;
+	}
+
+	if (cpu_info->vendor == X86_VENDOR_INTEL) {
+		/* Intel's perf-bias MSR support */
+		if (cpuid_level >= 6 && (cpuid_ecx(6) & (1 << 3)))
+			cpu_info->caps |= CPUPOWER_CAP_PERF_BIAS;
+
+		/* Intel's Turbo Ratio Limit support */
+		if (cpu_info->family == 6) {
+			switch (cpu_info->model) {
+			case 0x1A:	/* Core i7, Xeon 5500 series
+					 * Bloomfield, Gainstown NHM-EP
+					 */
+			case 0x1E:	/* Core i7 and i5 Processor
+					 * Clarksfield, Lynnfield, Jasper Forest
+					 */
+			case 0x1F:	/* Core i7 and i5 Processor - Nehalem */
+			case 0x25:	/* Westmere Client
+					 * Clarkdale, Arrandale
+					 */
+			case 0x2C:	/* Westmere EP - Gulftown */
+				cpu_info->caps |= CPUPOWER_CAP_HAS_TURBO_RATIO;
+			case 0x2A:	/* SNB */
+			case 0x2D:	/* SNB Xeon */
+				cpu_info->caps |= CPUPOWER_CAP_HAS_TURBO_RATIO;
+				cpu_info->caps |= CPUPOWER_CAP_IS_SNB;
+				break;
+			case 0x2E:	/* Nehalem-EX Xeon - Beckton */
+			case 0x2F:	/* Westmere-EX Xeon - Eagleton */
+			default:
+				break;
+			}
+		}
+	}
+
+	/*	printf("ID: %u - Extid: 0x%x - Caps: 0x%llx\n",
+		cpuid_level, ext_cpuid_level, cpu_info->caps);
+	*/
+	return ret;
+}
diff --git a/tools/power/cpupower/utils/helpers/helpers.h b/tools/power/cpupower/utils/helpers/helpers.h
new file mode 100644
index 000000000000..592ee362b877
--- /dev/null
+++ b/tools/power/cpupower/utils/helpers/helpers.h
@@ -0,0 +1,178 @@
+/*
+ *  (C) 2010,2011       Thomas Renninger <trenn@suse.de>, Novell Inc.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ * Miscellaneous helpers which do not fit or are worth
+ * to put into separate headers
+ */
+
+#ifndef __CPUPOWERUTILS_HELPERS__
+#define __CPUPOWERUTILS_HELPERS__
+
+#include <libintl.h>
+#include <locale.h>
+
+#include "helpers/bitmask.h"
+
+/* Internationalization ****************************/
+#define _(String) gettext(String)
+#ifndef gettext_noop
+#define gettext_noop(String) String
+#endif
+#define N_(String) gettext_noop(String)
+/* Internationalization ****************************/
+
+extern int run_as_root;
+extern struct bitmask *cpus_chosen;
+
+/* Global verbose (-d) stuff *********************************/
+/*
+ * define DEBUG via global Makefile variable
+ * Debug output is sent to stderr, do:
+ * cpupower monitor 2>/tmp/debug
+ * to split debug output away from normal output
+*/
+#ifdef DEBUG
+extern int be_verbose;
+
+#define dprint(fmt, ...) {					\
+		if (be_verbose) {				\
+			fprintf(stderr, "%s: " fmt,		\
+				__func__, ##__VA_ARGS__);	\
+		}						\
+	}
+#else
+static inline void dprint(const char *fmt, ...) { }
+#endif
+extern int be_verbose;
+/* Global verbose (-v) stuff *********************************/
+
+/* cpuid and cpuinfo helpers  **************************/
+enum cpupower_cpu_vendor {X86_VENDOR_UNKNOWN = 0, X86_VENDOR_INTEL,
+			  X86_VENDOR_AMD, X86_VENDOR_MAX};
+
+#define CPUPOWER_CAP_INV_TSC		0x00000001
+#define CPUPOWER_CAP_APERF		0x00000002
+#define CPUPOWER_CAP_AMD_CBP		0x00000004
+#define CPUPOWER_CAP_PERF_BIAS		0x00000008
+#define CPUPOWER_CAP_HAS_TURBO_RATIO	0x00000010
+#define CPUPOWER_CAP_IS_SNB		0x00000011
+#define CPUPOWER_CAP_INTEL_IDA		0x00000012
+
+#define MAX_HW_PSTATES 10
+
+struct cpupower_cpu_info {
+	enum cpupower_cpu_vendor vendor;
+	unsigned int family;
+	unsigned int model;
+	unsigned int stepping;
+	/* CPU capabilities read out from cpuid */
+	unsigned long long caps;
+};
+
+/* get_cpu_info
+ *
+ * Extract CPU vendor, family, model, stepping info from /proc/cpuinfo
+ *
+ * Returns 0 on success or a negativ error code
+ * Only used on x86, below global's struct values are zero/unknown on
+ * other archs
+ */
+extern int get_cpu_info(unsigned int cpu, struct cpupower_cpu_info *cpu_info);
+extern struct cpupower_cpu_info cpupower_cpu_info;
+/* cpuid and cpuinfo helpers  **************************/
+
+
+/* CPU topology/hierarchy parsing ******************/
+struct cpupower_topology {
+	/* Amount of CPU cores, packages and threads per core in the system */
+	unsigned int cores;
+	unsigned int pkgs;
+	unsigned int threads; /* per core */
+
+	/* Array gets mallocated with cores entries, holding per core info */
+	struct {
+		int pkg;
+		int core;
+		int cpu;
+	} *core_info;
+};
+
+extern int get_cpu_topology(struct cpupower_topology *cpu_top);
+extern void cpu_topology_release(struct cpupower_topology cpu_top);
+/* CPU topology/hierarchy parsing ******************/
+
+/* X86 ONLY ****************************************/
+#if defined(__i386__) || defined(__x86_64__)
+
+#include <pci/pci.h>
+
+/* Read/Write msr ****************************/
+extern int read_msr(int cpu, unsigned int idx, unsigned long long *val);
+extern int write_msr(int cpu, unsigned int idx, unsigned long long val);
+
+extern int msr_intel_set_perf_bias(unsigned int cpu, unsigned int val);
+extern int msr_intel_get_perf_bias(unsigned int cpu);
+extern unsigned long long msr_intel_get_turbo_ratio(unsigned int cpu);
+
+/* Read/Write msr ****************************/
+
+/* PCI stuff ****************************/
+extern int amd_pci_get_num_boost_states(int *active, int *states);
+extern struct pci_dev *pci_acc_init(struct pci_access **pacc, int vendor_id,
+				    int *dev_ids);
+
+/* PCI stuff ****************************/
+
+/* AMD HW pstate decoding **************************/
+
+extern int decode_pstates(unsigned int cpu, unsigned int cpu_family,
+			  int boost_states, unsigned long *pstates, int *no);
+
+/* AMD HW pstate decoding **************************/
+
+extern int cpufreq_has_boost_support(unsigned int cpu, int *support,
+				     int *active, int * states);
+/*
+ * CPUID functions returning a single datum
+ */
+unsigned int cpuid_eax(unsigned int op);
+unsigned int cpuid_ebx(unsigned int op);
+unsigned int cpuid_ecx(unsigned int op);
+unsigned int cpuid_edx(unsigned int op);
+
+/* cpuid and cpuinfo helpers  **************************/
+/* X86 ONLY ********************************************/
+#else
+static inline int decode_pstates(unsigned int cpu, unsigned int cpu_family,
+				 int boost_states, unsigned long *pstates,
+				 int *no)
+{ return -1; };
+
+static inline int read_msr(int cpu, unsigned int idx, unsigned long long *val)
+{ return -1; };
+static inline int write_msr(int cpu, unsigned int idx, unsigned long long val)
+{ return -1; };
+static inline int msr_intel_set_perf_bias(unsigned int cpu, unsigned int val)
+{ return -1; };
+static inline int msr_intel_get_perf_bias(unsigned int cpu)
+{ return -1; };
+static inline unsigned long long msr_intel_get_turbo_ratio(unsigned int cpu)
+{ return 0; };
+
+/* Read/Write msr ****************************/
+
+static inline int cpufreq_has_boost_support(unsigned int cpu, int *support,
+					    int *active, int * states)
+{ return -1; }
+
+/* cpuid and cpuinfo helpers  **************************/
+
+static inline unsigned int cpuid_eax(unsigned int op) { return 0; };
+static inline unsigned int cpuid_ebx(unsigned int op) { return 0; };
+static inline unsigned int cpuid_ecx(unsigned int op) { return 0; };
+static inline unsigned int cpuid_edx(unsigned int op) { return 0; };
+#endif /* defined(__i386__) || defined(__x86_64__) */
+
+#endif /* __CPUPOWERUTILS_HELPERS__ */
diff --git a/tools/power/cpupower/utils/helpers/misc.c b/tools/power/cpupower/utils/helpers/misc.c
new file mode 100644
index 000000000000..1609243f5c64
--- /dev/null
+++ b/tools/power/cpupower/utils/helpers/misc.c
@@ -0,0 +1,27 @@
+#if defined(__i386__) || defined(__x86_64__)
+
+#include "helpers/helpers.h"
+
+int cpufreq_has_boost_support(unsigned int cpu, int *support, int *active,
+			int *states)
+{
+	struct cpupower_cpu_info cpu_info;
+	int ret;
+
+	*support = *active = *states = 0;
+
+	ret = get_cpu_info(0, &cpu_info);
+	if (ret)
+		return ret;
+
+	if (cpupower_cpu_info.caps & CPUPOWER_CAP_AMD_CBP) {
+		*support = 1;
+		amd_pci_get_num_boost_states(active, states);
+		if (ret <= 0)
+			return ret;
+		*support = 1;
+	} else if (cpupower_cpu_info.caps & CPUPOWER_CAP_INTEL_IDA)
+		*support = *active = 1;
+	return 0;
+}
+#endif /* #if defined(__i386__) || defined(__x86_64__) */
diff --git a/tools/power/cpupower/utils/helpers/msr.c b/tools/power/cpupower/utils/helpers/msr.c
new file mode 100644
index 000000000000..31a4b24a8bc6
--- /dev/null
+++ b/tools/power/cpupower/utils/helpers/msr.c
@@ -0,0 +1,115 @@
+#if defined(__i386__) || defined(__x86_64__)
+
+#include <fcntl.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <stdint.h>
+
+#include "helpers/helpers.h"
+
+/* Intel specific MSRs */
+#define MSR_IA32_PERF_STATUS		0x198
+#define MSR_IA32_MISC_ENABLES		0x1a0
+#define MSR_IA32_ENERGY_PERF_BIAS	0x1b0
+#define MSR_NEHALEM_TURBO_RATIO_LIMIT	0x1ad
+
+/*
+ * read_msr
+ *
+ * Will return 0 on success and -1 on failure.
+ * Possible errno values could be:
+ * EFAULT -If the read/write did not fully complete
+ * EIO    -If the CPU does not support MSRs
+ * ENXIO  -If the CPU does not exist
+ */
+
+int read_msr(int cpu, unsigned int idx, unsigned long long *val)
+{
+	int fd;
+	char msr_file_name[64];
+
+	sprintf(msr_file_name, "/dev/cpu/%d/msr", cpu);
+	fd = open(msr_file_name, O_RDONLY);
+	if (fd < 0)
+		return -1;
+	if (lseek(fd, idx, SEEK_CUR) == -1)
+		goto err;
+	if (read(fd, val, sizeof *val) != sizeof *val)
+		goto err;
+	close(fd);
+	return 0;
+ err:
+	close(fd);
+	return -1;
+}
+
+/*
+ * write_msr
+ *
+ * Will return 0 on success and -1 on failure.
+ * Possible errno values could be:
+ * EFAULT -If the read/write did not fully complete
+ * EIO    -If the CPU does not support MSRs
+ * ENXIO  -If the CPU does not exist
+ */
+int write_msr(int cpu, unsigned int idx, unsigned long long val)
+{
+	int fd;
+	char msr_file_name[64];
+
+	sprintf(msr_file_name, "/dev/cpu/%d/msr", cpu);
+	fd = open(msr_file_name, O_WRONLY);
+	if (fd < 0)
+		return -1;
+	if (lseek(fd, idx, SEEK_CUR) == -1)
+		goto err;
+	if (write(fd, &val, sizeof val) != sizeof val)
+		goto err;
+	close(fd);
+	return 0;
+ err:
+	close(fd);
+	return -1;
+}
+
+int msr_intel_get_perf_bias(unsigned int cpu)
+{
+	unsigned long long val;
+	int ret;
+
+	if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_PERF_BIAS))
+		return -1;
+
+	ret = read_msr(cpu, MSR_IA32_ENERGY_PERF_BIAS, &val);
+	if (ret)
+		return ret;
+	return val;
+}
+
+int msr_intel_set_perf_bias(unsigned int cpu, unsigned int val)
+{
+	int ret;
+
+	if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_PERF_BIAS))
+		return -1;
+
+	ret = write_msr(cpu, MSR_IA32_ENERGY_PERF_BIAS, val);
+	if (ret)
+		return ret;
+	return 0;
+}
+
+unsigned long long msr_intel_get_turbo_ratio(unsigned int cpu)
+{
+	unsigned long long val;
+	int ret;
+
+	if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_HAS_TURBO_RATIO))
+		return -1;
+
+	ret = read_msr(cpu, MSR_NEHALEM_TURBO_RATIO_LIMIT, &val);
+	if (ret)
+		return ret;
+	return val;
+}
+#endif
diff --git a/tools/power/cpupower/utils/helpers/pci.c b/tools/power/cpupower/utils/helpers/pci.c
new file mode 100644
index 000000000000..cd2eb6fe41c4
--- /dev/null
+++ b/tools/power/cpupower/utils/helpers/pci.c
@@ -0,0 +1,44 @@
+#if defined(__i386__) || defined(__x86_64__)
+
+#include <helpers/helpers.h>
+
+/*
+ * pci_acc_init
+ *
+ * PCI access helper function depending on libpci
+ *
+ * **pacc : if a valid pci_dev is returned
+ *         *pacc must be passed to pci_acc_cleanup to free it
+ *
+ * vendor_id : the pci vendor id matching the pci device to access
+ * dev_ids :   device ids matching the pci device to access
+ *
+ * Returns :
+ * struct pci_dev which can be used with pci_{read,write}_* functions
+ *                to access the PCI config space of matching pci devices
+ */
+struct pci_dev *pci_acc_init(struct pci_access **pacc, int vendor_id,
+				    int *dev_ids)
+{
+	struct pci_filter filter_nb_link = { -1, -1, -1, -1, vendor_id, 0};
+	struct pci_dev *device;
+	unsigned int i;
+
+	*pacc = pci_alloc();
+	if (*pacc == NULL)
+		return NULL;
+
+	pci_init(*pacc);
+	pci_scan_bus(*pacc);
+
+	for (i = 0; dev_ids[i] != 0; i++) {
+		filter_nb_link.device = dev_ids[i];
+		for (device = (*pacc)->devices; device; device = device->next) {
+			if (pci_filter_match(&filter_nb_link, device))
+				return device;
+		}
+	}
+	pci_cleanup(*pacc);
+	return NULL;
+}
+#endif /* defined(__i386__) || defined(__x86_64__) */
diff --git a/tools/power/cpupower/utils/helpers/sysfs.c b/tools/power/cpupower/utils/helpers/sysfs.c
new file mode 100644
index 000000000000..55e2466674c6
--- /dev/null
+++ b/tools/power/cpupower/utils/helpers/sysfs.c
@@ -0,0 +1,358 @@
+/*
+ *  (C) 2004-2009  Dominik Brodowski <linux@dominikbrodowski.de>
+ *  (C) 2011       Thomas Renninger <trenn@novell.com> Novell Inc.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ */
+
+#include <stdio.h>
+#include <errno.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+
+#include "helpers/sysfs.h"
+
+unsigned int sysfs_read_file(const char *path, char *buf, size_t buflen)
+{
+	int fd;
+	ssize_t numread;
+
+	fd = open(path, O_RDONLY);
+	if (fd == -1)
+		return 0;
+
+	numread = read(fd, buf, buflen - 1);
+	if (numread < 1) {
+		close(fd);
+		return 0;
+	}
+
+	buf[numread] = '\0';
+	close(fd);
+
+	return (unsigned int) numread;
+}
+
+static unsigned int sysfs_write_file(const char *path,
+				     const char *value, size_t len)
+{
+	int fd;
+	ssize_t numwrite;
+
+	fd = open(path, O_WRONLY);
+	if (fd == -1)
+		return 0;
+
+	numwrite = write(fd, value, len);
+	if (numwrite < 1) {
+		close(fd);
+		return 0;
+	}
+	close(fd);
+	return (unsigned int) numwrite;
+}
+
+/* CPUidle idlestate specific /sys/devices/system/cpu/cpuX/cpuidle/ access */
+
+/*
+ * helper function to read file from /sys into given buffer
+ * fname is a relative path under "cpuX/cpuidle/stateX/" dir
+ * cstates starting with 0, C0 is not counted as cstate.
+ * This means if you want C1 info, pass 0 as idlestate param
+ */
+unsigned int sysfs_idlestate_read_file(unsigned int cpu, unsigned int idlestate,
+			     const char *fname, char *buf, size_t buflen)
+{
+	char path[SYSFS_PATH_MAX];
+	int fd;
+	ssize_t numread;
+
+	snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpuidle/state%u/%s",
+		 cpu, idlestate, fname);
+
+	fd = open(path, O_RDONLY);
+	if (fd == -1)
+		return 0;
+
+	numread = read(fd, buf, buflen - 1);
+	if (numread < 1) {
+		close(fd);
+		return 0;
+	}
+
+	buf[numread] = '\0';
+	close(fd);
+
+	return (unsigned int) numread;
+}
+
+/* read access to files which contain one numeric value */
+
+enum idlestate_value {
+	IDLESTATE_USAGE,
+	IDLESTATE_POWER,
+	IDLESTATE_LATENCY,
+	IDLESTATE_TIME,
+	MAX_IDLESTATE_VALUE_FILES
+};
+
+static const char *idlestate_value_files[MAX_IDLESTATE_VALUE_FILES] = {
+	[IDLESTATE_USAGE] = "usage",
+	[IDLESTATE_POWER] = "power",
+	[IDLESTATE_LATENCY] = "latency",
+	[IDLESTATE_TIME]  = "time",
+};
+
+static unsigned long long sysfs_idlestate_get_one_value(unsigned int cpu,
+						     unsigned int idlestate,
+						     enum idlestate_value which)
+{
+	unsigned long long value;
+	unsigned int len;
+	char linebuf[MAX_LINE_LEN];
+	char *endp;
+
+	if (which >= MAX_IDLESTATE_VALUE_FILES)
+		return 0;
+
+	len = sysfs_idlestate_read_file(cpu, idlestate,
+					idlestate_value_files[which],
+					linebuf, sizeof(linebuf));
+	if (len == 0)
+		return 0;
+
+	value = strtoull(linebuf, &endp, 0);
+
+	if (endp == linebuf || errno == ERANGE)
+		return 0;
+
+	return value;
+}
+
+/* read access to files which contain one string */
+
+enum idlestate_string {
+	IDLESTATE_DESC,
+	IDLESTATE_NAME,
+	MAX_IDLESTATE_STRING_FILES
+};
+
+static const char *idlestate_string_files[MAX_IDLESTATE_STRING_FILES] = {
+	[IDLESTATE_DESC] = "desc",
+	[IDLESTATE_NAME] = "name",
+};
+
+
+static char *sysfs_idlestate_get_one_string(unsigned int cpu,
+					unsigned int idlestate,
+					enum idlestate_string which)
+{
+	char linebuf[MAX_LINE_LEN];
+	char *result;
+	unsigned int len;
+
+	if (which >= MAX_IDLESTATE_STRING_FILES)
+		return NULL;
+
+	len = sysfs_idlestate_read_file(cpu, idlestate,
+					idlestate_string_files[which],
+					linebuf, sizeof(linebuf));
+	if (len == 0)
+		return NULL;
+
+	result = strdup(linebuf);
+	if (result == NULL)
+		return NULL;
+
+	if (result[strlen(result) - 1] == '\n')
+		result[strlen(result) - 1] = '\0';
+
+	return result;
+}
+
+unsigned long sysfs_get_idlestate_latency(unsigned int cpu,
+					unsigned int idlestate)
+{
+	return sysfs_idlestate_get_one_value(cpu, idlestate, IDLESTATE_LATENCY);
+}
+
+unsigned long sysfs_get_idlestate_usage(unsigned int cpu,
+					unsigned int idlestate)
+{
+	return sysfs_idlestate_get_one_value(cpu, idlestate, IDLESTATE_USAGE);
+}
+
+unsigned long long sysfs_get_idlestate_time(unsigned int cpu,
+					unsigned int idlestate)
+{
+	return sysfs_idlestate_get_one_value(cpu, idlestate, IDLESTATE_TIME);
+}
+
+char *sysfs_get_idlestate_name(unsigned int cpu, unsigned int idlestate)
+{
+	return sysfs_idlestate_get_one_string(cpu, idlestate, IDLESTATE_NAME);
+}
+
+char *sysfs_get_idlestate_desc(unsigned int cpu, unsigned int idlestate)
+{
+	return sysfs_idlestate_get_one_string(cpu, idlestate, IDLESTATE_DESC);
+}
+
+/*
+ * Returns number of supported C-states of CPU core cpu
+ * Negativ in error case
+ * Zero if cpuidle does not export any C-states
+ */
+int sysfs_get_idlestate_count(unsigned int cpu)
+{
+	char file[SYSFS_PATH_MAX];
+	struct stat statbuf;
+	int idlestates = 1;
+
+
+	snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU "cpuidle");
+	if (stat(file, &statbuf) != 0 || !S_ISDIR(statbuf.st_mode))
+		return -ENODEV;
+
+	snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU "cpu%u/cpuidle/state0", cpu);
+	if (stat(file, &statbuf) != 0 || !S_ISDIR(statbuf.st_mode))
+		return 0;
+
+	while (stat(file, &statbuf) == 0 && S_ISDIR(statbuf.st_mode)) {
+		snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU
+			 "cpu%u/cpuidle/state%d", cpu, idlestates);
+		idlestates++;
+	}
+	idlestates--;
+	return idlestates;
+}
+
+/* CPUidle general /sys/devices/system/cpu/cpuidle/ sysfs access ********/
+
+/*
+ * helper function to read file from /sys into given buffer
+ * fname is a relative path under "cpu/cpuidle/" dir
+ */
+static unsigned int sysfs_cpuidle_read_file(const char *fname, char *buf,
+					    size_t buflen)
+{
+	char path[SYSFS_PATH_MAX];
+
+	snprintf(path, sizeof(path), PATH_TO_CPU "cpuidle/%s", fname);
+
+	return sysfs_read_file(path, buf, buflen);
+}
+
+
+
+/* read access to files which contain one string */
+
+enum cpuidle_string {
+	CPUIDLE_GOVERNOR,
+	CPUIDLE_GOVERNOR_RO,
+	CPUIDLE_DRIVER,
+	MAX_CPUIDLE_STRING_FILES
+};
+
+static const char *cpuidle_string_files[MAX_CPUIDLE_STRING_FILES] = {
+	[CPUIDLE_GOVERNOR]	= "current_governor",
+	[CPUIDLE_GOVERNOR_RO]	= "current_governor_ro",
+	[CPUIDLE_DRIVER]	= "current_driver",
+};
+
+
+static char *sysfs_cpuidle_get_one_string(enum cpuidle_string which)
+{
+	char linebuf[MAX_LINE_LEN];
+	char *result;
+	unsigned int len;
+
+	if (which >= MAX_CPUIDLE_STRING_FILES)
+		return NULL;
+
+	len = sysfs_cpuidle_read_file(cpuidle_string_files[which],
+				linebuf, sizeof(linebuf));
+	if (len == 0)
+		return NULL;
+
+	result = strdup(linebuf);
+	if (result == NULL)
+		return NULL;
+
+	if (result[strlen(result) - 1] == '\n')
+		result[strlen(result) - 1] = '\0';
+
+	return result;
+}
+
+char *sysfs_get_cpuidle_governor(void)
+{
+	char *tmp = sysfs_cpuidle_get_one_string(CPUIDLE_GOVERNOR_RO);
+	if (!tmp)
+		return sysfs_cpuidle_get_one_string(CPUIDLE_GOVERNOR);
+	else
+		return tmp;
+}
+
+char *sysfs_get_cpuidle_driver(void)
+{
+	return sysfs_cpuidle_get_one_string(CPUIDLE_DRIVER);
+}
+/* CPUidle idlestate specific /sys/devices/system/cpu/cpuX/cpuidle/ access */
+
+/*
+ * Get sched_mc or sched_smt settings
+ * Pass "mc" or "smt" as argument
+ *
+ * Returns negative value on failure
+ */
+int sysfs_get_sched(const char *smt_mc)
+{
+	unsigned long value;
+	char linebuf[MAX_LINE_LEN];
+	char *endp;
+	char path[SYSFS_PATH_MAX];
+
+	if (strcmp("mc", smt_mc) && strcmp("smt", smt_mc))
+		return -EINVAL;
+
+	snprintf(path, sizeof(path),
+		PATH_TO_CPU "sched_%s_power_savings", smt_mc);
+	if (sysfs_read_file(path, linebuf, MAX_LINE_LEN) == 0)
+		return -1;
+	value = strtoul(linebuf, &endp, 0);
+	if (endp == linebuf || errno == ERANGE)
+		return -1;
+	return value;
+}
+
+/*
+ * Get sched_mc or sched_smt settings
+ * Pass "mc" or "smt" as argument
+ *
+ * Returns negative value on failure
+ */
+int sysfs_set_sched(const char *smt_mc, int val)
+{
+	char linebuf[MAX_LINE_LEN];
+	char path[SYSFS_PATH_MAX];
+	struct stat statbuf;
+
+	if (strcmp("mc", smt_mc) && strcmp("smt", smt_mc))
+		return -EINVAL;
+
+	snprintf(path, sizeof(path),
+		PATH_TO_CPU "sched_%s_power_savings", smt_mc);
+	sprintf(linebuf, "%d", val);
+
+	if (stat(path, &statbuf) != 0)
+		return -ENODEV;
+
+	if (sysfs_write_file(path, linebuf, MAX_LINE_LEN) == 0)
+		return -1;
+	return 0;
+}
diff --git a/tools/power/cpupower/utils/helpers/sysfs.h b/tools/power/cpupower/utils/helpers/sysfs.h
new file mode 100644
index 000000000000..f9373e090637
--- /dev/null
+++ b/tools/power/cpupower/utils/helpers/sysfs.h
@@ -0,0 +1,28 @@
+#ifndef __CPUPOWER_HELPERS_SYSFS_H__
+#define __CPUPOWER_HELPERS_SYSFS_H__
+
+#define PATH_TO_CPU "/sys/devices/system/cpu/"
+#define MAX_LINE_LEN 255
+#define SYSFS_PATH_MAX 255
+
+extern unsigned int sysfs_read_file(const char *path, char *buf, size_t buflen);
+
+extern unsigned long sysfs_get_idlestate_latency(unsigned int cpu,
+						unsigned int idlestate);
+extern unsigned long sysfs_get_idlestate_usage(unsigned int cpu,
+					unsigned int idlestate);
+extern unsigned long long sysfs_get_idlestate_time(unsigned int cpu,
+						unsigned int idlestate);
+extern char *sysfs_get_idlestate_name(unsigned int cpu,
+				unsigned int idlestate);
+extern char *sysfs_get_idlestate_desc(unsigned int cpu,
+				unsigned int idlestate);
+extern int sysfs_get_idlestate_count(unsigned int cpu);
+
+extern char *sysfs_get_cpuidle_governor(void);
+extern char *sysfs_get_cpuidle_driver(void);
+
+extern int sysfs_get_sched(const char *smt_mc);
+extern int sysfs_set_sched(const char *smt_mc, int val);
+
+#endif /* __CPUPOWER_HELPERS_SYSFS_H__ */
diff --git a/tools/power/cpupower/utils/helpers/topology.c b/tools/power/cpupower/utils/helpers/topology.c
new file mode 100644
index 000000000000..385ee5c7570c
--- /dev/null
+++ b/tools/power/cpupower/utils/helpers/topology.c
@@ -0,0 +1,108 @@
+/*
+ *  (C) 2010,2011       Thomas Renninger <trenn@suse.de>, Novell Inc.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ * ToDo: Needs to be done more properly for AMD/Intel specifics
+ */
+
+/* Helper struct for qsort, must be in sync with cpupower_topology.cpu_info */
+/* Be careful: Need to pass unsigned to the sort, so that offlined cores are
+   in the end, but double check for -1 for offlined cpus at other places */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <unistd.h>
+#include <errno.h>
+#include <fcntl.h>
+
+#include <helpers/helpers.h>
+#include <helpers/sysfs.h>
+
+/* returns -1 on failure, 0 on success */
+int sysfs_topology_read_file(unsigned int cpu, const char *fname)
+{
+	unsigned long value;
+	char linebuf[MAX_LINE_LEN];
+	char *endp;
+	char path[SYSFS_PATH_MAX];
+
+	snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/topology/%s",
+			 cpu, fname);
+	if (sysfs_read_file(path, linebuf, MAX_LINE_LEN) == 0)
+		return -1;
+	value = strtoul(linebuf, &endp, 0);
+	if (endp == linebuf || errno == ERANGE)
+		return -1;
+	return value;
+}
+
+struct cpuid_core_info {
+	unsigned int pkg;
+	unsigned int thread;
+	unsigned int cpu;
+};
+
+static int __compare(const void *t1, const void *t2)
+{
+	struct cpuid_core_info *top1 = (struct cpuid_core_info *)t1;
+	struct cpuid_core_info *top2 = (struct cpuid_core_info *)t2;
+	if (top1->pkg < top2->pkg)
+		return -1;
+	else if (top1->pkg > top2->pkg)
+		return 1;
+	else if (top1->thread < top2->thread)
+		return -1;
+	else if (top1->thread > top2->thread)
+		return 1;
+	else if (top1->cpu < top2->cpu)
+		return -1;
+	else if (top1->cpu > top2->cpu)
+		return 1;
+	else
+		return 0;
+}
+
+/*
+ * Returns amount of cpus, negative on error, cpu_top must be
+ * passed to cpu_topology_release to free resources
+ *
+ * Array is sorted after ->pkg, ->core, then ->cpu
+ */
+int get_cpu_topology(struct cpupower_topology *cpu_top)
+{
+	int cpu, cpus = sysconf(_SC_NPROCESSORS_CONF);
+
+	cpu_top->core_info = malloc(sizeof(struct cpupower_topology) * cpus);
+	if (cpu_top->core_info == NULL)
+		return -ENOMEM;
+	cpu_top->pkgs = cpu_top->cores = 0;
+	for (cpu = 0; cpu < cpus; cpu++) {
+		cpu_top->core_info[cpu].pkg =
+			sysfs_topology_read_file(cpu, "physical_package_id");
+		if ((int)cpu_top->core_info[cpu].pkg != -1 &&
+		    cpu_top->core_info[cpu].pkg > cpu_top->pkgs)
+			cpu_top->pkgs = cpu_top->core_info[cpu].pkg;
+		cpu_top->core_info[cpu].core =
+			sysfs_topology_read_file(cpu, "core_id");
+		cpu_top->core_info[cpu].cpu = cpu;
+	}
+	cpu_top->pkgs++;
+
+	qsort(cpu_top->core_info, cpus, sizeof(struct cpuid_core_info),
+	      __compare);
+
+	/* Intel's cores count is not consecutively numbered, there may
+	 * be a core_id of 3, but none of 2. Assume there always is 0
+	 * Get amount of cores by counting duplicates in a package
+	for (cpu = 0; cpu_top->core_info[cpu].pkg = 0 && cpu < cpus; cpu++) {
+		if (cpu_top->core_info[cpu].core == 0)
+	cpu_top->cores++;
+	*/
+	return cpus;
+}
+
+void cpu_topology_release(struct cpupower_topology cpu_top)
+{
+	free(cpu_top.core_info);
+}
diff --git a/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c b/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c
new file mode 100644
index 000000000000..202e555988be
--- /dev/null
+++ b/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c
@@ -0,0 +1,338 @@
+/*
+ *  (C) 2010,2011      Thomas Renninger <trenn@suse.de>, Novell Inc.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  PCI initialization based on example code from:
+ *  Andreas Herrmann <andreas.herrmann3@amd.com>
+ */
+
+#if defined(__i386__) || defined(__x86_64__)
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <time.h>
+#include <string.h>
+
+#include <pci/pci.h>
+
+#include "idle_monitor/cpupower-monitor.h"
+#include "helpers/helpers.h"
+
+/******** PCI parts could go into own file and get shared ***************/
+
+#define PCI_NON_PC0_OFFSET	0xb0
+#define PCI_PC1_OFFSET		0xb4
+#define PCI_PC6_OFFSET		0xb8
+
+#define PCI_MONITOR_ENABLE_REG  0xe0
+
+#define PCI_NON_PC0_ENABLE_BIT	0
+#define PCI_PC1_ENABLE_BIT	1
+#define PCI_PC6_ENABLE_BIT	2
+
+#define PCI_NBP1_STAT_OFFSET	0x98
+#define PCI_NBP1_ACTIVE_BIT	2
+#define PCI_NBP1_ENTERED_BIT	1
+
+#define PCI_NBP1_CAP_OFFSET	0x90
+#define PCI_NBP1_CAPABLE_BIT    31
+
+#define OVERFLOW_MS		343597 /* 32 bit register filled at 12500 HZ
+					  (1 tick per 80ns) */
+
+enum amd_fam14h_states {NON_PC0 = 0, PC1, PC6, NBP1,
+			AMD_FAM14H_STATE_NUM};
+
+static int fam14h_get_count_percent(unsigned int self_id, double *percent,
+				    unsigned int cpu);
+static int fam14h_nbp1_count(unsigned int id, unsigned long long *count,
+			     unsigned int cpu);
+
+static cstate_t amd_fam14h_cstates[AMD_FAM14H_STATE_NUM] = {
+	{
+		.name			= "!PC0",
+		.desc			= N_("Package in sleep state (PC1 or deeper)"),
+		.id			= NON_PC0,
+		.range			= RANGE_PACKAGE,
+		.get_count_percent	= fam14h_get_count_percent,
+	},
+	{
+		.name			= "PC1",
+		.desc			= N_("Processor Package C1"),
+		.id			= PC1,
+		.range			= RANGE_PACKAGE,
+		.get_count_percent	= fam14h_get_count_percent,
+	},
+	{
+		.name			= "PC6",
+		.desc			= N_("Processor Package C6"),
+		.id			= PC6,
+		.range			= RANGE_PACKAGE,
+		.get_count_percent	= fam14h_get_count_percent,
+	},
+	{
+		.name			= "NBP1",
+		.desc			= N_("North Bridge P1 boolean counter (returns 0 or 1)"),
+		.id			= NBP1,
+		.range			= RANGE_PACKAGE,
+		.get_count		= fam14h_nbp1_count,
+	},
+};
+
+static struct pci_access *pci_acc;
+static int pci_vendor_id = 0x1022;
+static int pci_dev_ids[2] = {0x1716, 0};
+static struct pci_dev *amd_fam14h_pci_dev;
+
+static int nbp1_entered;
+
+struct timespec start_time;
+static unsigned long long timediff;
+
+#ifdef DEBUG
+struct timespec dbg_time;
+long dbg_timediff;
+#endif
+
+static unsigned long long *previous_count[AMD_FAM14H_STATE_NUM];
+static unsigned long long *current_count[AMD_FAM14H_STATE_NUM];
+
+static int amd_fam14h_get_pci_info(struct cstate *state,
+				   unsigned int *pci_offset,
+				   unsigned int *enable_bit,
+				   unsigned int cpu)
+{
+	switch (state->id) {
+	case NON_PC0:
+		*enable_bit = PCI_NON_PC0_ENABLE_BIT;
+		*pci_offset = PCI_NON_PC0_OFFSET;
+		break;
+	case PC1:
+		*enable_bit = PCI_PC1_ENABLE_BIT;
+		*pci_offset = PCI_PC1_OFFSET;
+		break;
+	case PC6:
+		*enable_bit = PCI_PC6_ENABLE_BIT;
+		*pci_offset = PCI_PC6_OFFSET;
+		break;
+	case NBP1:
+		*enable_bit = PCI_NBP1_ENTERED_BIT;
+		*pci_offset = PCI_NBP1_STAT_OFFSET;
+		break;
+	default:
+		return -1;
+	};
+	return 0;
+}
+
+static int amd_fam14h_init(cstate_t *state, unsigned int cpu)
+{
+	int enable_bit, pci_offset, ret;
+	uint32_t val;
+
+	ret = amd_fam14h_get_pci_info(state, &pci_offset, &enable_bit, cpu);
+	if (ret)
+		return ret;
+
+	/* NBP1 needs extra treating -> write 1 to D18F6x98 bit 1 for init */
+	if (state->id == NBP1) {
+		val = pci_read_long(amd_fam14h_pci_dev, pci_offset);
+		val |= 1 << enable_bit;
+		val = pci_write_long(amd_fam14h_pci_dev, pci_offset, val);
+		return ret;
+	}
+
+	/* Enable monitor */
+	val = pci_read_long(amd_fam14h_pci_dev, PCI_MONITOR_ENABLE_REG);
+	dprint("Init %s: read at offset: 0x%x val: %u\n", state->name,
+	       PCI_MONITOR_ENABLE_REG, (unsigned int) val);
+	val |= 1 << enable_bit;
+	pci_write_long(amd_fam14h_pci_dev, PCI_MONITOR_ENABLE_REG, val);
+
+	dprint("Init %s: offset: 0x%x enable_bit: %d - val: %u (%u)\n",
+	       state->name, PCI_MONITOR_ENABLE_REG, enable_bit,
+	       (unsigned int) val, cpu);
+
+	/* Set counter to zero */
+	pci_write_long(amd_fam14h_pci_dev, pci_offset, 0);
+	previous_count[state->id][cpu] = 0;
+
+	return 0;
+}
+
+static int amd_fam14h_disable(cstate_t *state, unsigned int cpu)
+{
+	int enable_bit, pci_offset, ret;
+	uint32_t val;
+
+	ret = amd_fam14h_get_pci_info(state, &pci_offset, &enable_bit, cpu);
+	if (ret)
+		return ret;
+
+	val = pci_read_long(amd_fam14h_pci_dev, pci_offset);
+	dprint("%s: offset: 0x%x %u\n", state->name, pci_offset, val);
+	if (state->id == NBP1) {
+		/* was the bit whether NBP1 got entered set? */
+		nbp1_entered = (val & (1 << PCI_NBP1_ACTIVE_BIT)) |
+			(val & (1 << PCI_NBP1_ENTERED_BIT));
+
+		dprint("NBP1 was %sentered - 0x%x - enable_bit: "
+		       "%d - pci_offset: 0x%x\n",
+		       nbp1_entered ? "" : "not ",
+		       val, enable_bit, pci_offset);
+		return ret;
+	}
+	current_count[state->id][cpu] = val;
+
+	dprint("%s: Current -  %llu (%u)\n", state->name,
+	       current_count[state->id][cpu], cpu);
+	dprint("%s: Previous - %llu (%u)\n", state->name,
+	       previous_count[state->id][cpu], cpu);
+
+	val = pci_read_long(amd_fam14h_pci_dev, PCI_MONITOR_ENABLE_REG);
+	val &= ~(1 << enable_bit);
+	pci_write_long(amd_fam14h_pci_dev, PCI_MONITOR_ENABLE_REG, val);
+
+	return 0;
+}
+
+static int fam14h_nbp1_count(unsigned int id, unsigned long long *count,
+			     unsigned int cpu)
+{
+	if (id == NBP1) {
+		if (nbp1_entered)
+			*count = 1;
+		else
+			*count = 0;
+		return 0;
+	}
+	return -1;
+}
+static int fam14h_get_count_percent(unsigned int id, double *percent,
+				    unsigned int cpu)
+{
+	unsigned long diff;
+
+	if (id >= AMD_FAM14H_STATE_NUM)
+		return -1;
+	/* residency count in 80ns -> divide through 12.5 to get us residency */
+	diff = current_count[id][cpu] - previous_count[id][cpu];
+
+	if (timediff == 0)
+		*percent = 0.0;
+	else
+		*percent = 100.0 * diff / timediff / 12.5;
+
+	dprint("Timediff: %llu - res~: %lu us - percent: %.2f %%\n",
+	       timediff, diff * 10 / 125, *percent);
+
+	return 0;
+}
+
+static int amd_fam14h_start(void)
+{
+	int num, cpu;
+	clock_gettime(CLOCK_REALTIME, &start_time);
+	for (num = 0; num < AMD_FAM14H_STATE_NUM; num++) {
+		for (cpu = 0; cpu < cpu_count; cpu++)
+			amd_fam14h_init(&amd_fam14h_cstates[num], cpu);
+	}
+#ifdef DEBUG
+	clock_gettime(CLOCK_REALTIME, &dbg_time);
+	dbg_timediff = timespec_diff_us(start_time, dbg_time);
+	dprint("Enabling counters took: %lu us\n",
+	       dbg_timediff);
+#endif
+	return 0;
+}
+
+static int amd_fam14h_stop(void)
+{
+	int num, cpu;
+	struct timespec end_time;
+
+	clock_gettime(CLOCK_REALTIME, &end_time);
+
+	for (num = 0; num < AMD_FAM14H_STATE_NUM; num++) {
+		for (cpu = 0; cpu < cpu_count; cpu++)
+			amd_fam14h_disable(&amd_fam14h_cstates[num], cpu);
+	}
+#ifdef DEBUG
+	clock_gettime(CLOCK_REALTIME, &dbg_time);
+	dbg_timediff = timespec_diff_us(end_time, dbg_time);
+	dprint("Disabling counters took: %lu ns\n", dbg_timediff);
+#endif
+	timediff = timespec_diff_us(start_time, end_time);
+	if (timediff / 1000 > OVERFLOW_MS)
+		print_overflow_err((unsigned int)timediff / 1000000,
+				   OVERFLOW_MS / 1000);
+
+	return 0;
+}
+
+static int is_nbp1_capable(void)
+{
+	uint32_t val;
+	val = pci_read_long(amd_fam14h_pci_dev, PCI_NBP1_CAP_OFFSET);
+	return val & (1 << 31);
+}
+
+struct cpuidle_monitor *amd_fam14h_register(void)
+{
+	int num;
+
+	if (cpupower_cpu_info.vendor != X86_VENDOR_AMD)
+		return NULL;
+
+	if (cpupower_cpu_info.family == 0x14) {
+		if (cpu_count <= 0 || cpu_count > 2) {
+			fprintf(stderr, "AMD fam14h: Invalid cpu count: %d\n",
+				cpu_count);
+			return NULL;
+		}
+	} else
+		return NULL;
+
+	/* We do not alloc for nbp1 machine wide counter */
+	for (num = 0; num < AMD_FAM14H_STATE_NUM - 1; num++) {
+		previous_count[num] = calloc(cpu_count,
+					      sizeof(unsigned long long));
+		current_count[num]  = calloc(cpu_count,
+					      sizeof(unsigned long long));
+	}
+
+	amd_fam14h_pci_dev = pci_acc_init(&pci_acc, pci_vendor_id, pci_dev_ids);
+	if (amd_fam14h_pci_dev == NULL || pci_acc == NULL)
+		return NULL;
+
+	if (!is_nbp1_capable())
+		amd_fam14h_monitor.hw_states_num = AMD_FAM14H_STATE_NUM - 1;
+
+	amd_fam14h_monitor.name_len = strlen(amd_fam14h_monitor.name);
+	return &amd_fam14h_monitor;
+}
+
+static void amd_fam14h_unregister(void)
+{
+	int num;
+	for (num = 0; num < AMD_FAM14H_STATE_NUM - 1; num++) {
+		free(previous_count[num]);
+		free(current_count[num]);
+	}
+	pci_cleanup(pci_acc);
+}
+
+struct cpuidle_monitor amd_fam14h_monitor = {
+	.name			= "Ontario",
+	.hw_states		= amd_fam14h_cstates,
+	.hw_states_num		= AMD_FAM14H_STATE_NUM,
+	.start			= amd_fam14h_start,
+	.stop			= amd_fam14h_stop,
+	.do_register		= amd_fam14h_register,
+	.unregister		= amd_fam14h_unregister,
+	.needs_root		= 1,
+	.overflow_s		= OVERFLOW_MS / 1000,
+};
+#endif /* #if defined(__i386__) || defined(__x86_64__) */
diff --git a/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c b/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c
new file mode 100644
index 000000000000..d048b96a6155
--- /dev/null
+++ b/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c
@@ -0,0 +1,196 @@
+/*
+ *  (C) 2010,2011       Thomas Renninger <trenn@suse.de>, Novell Inc
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <string.h>
+#include <limits.h>
+
+#include "helpers/sysfs.h"
+#include "helpers/helpers.h"
+#include "idle_monitor/cpupower-monitor.h"
+
+#define CPUIDLE_STATES_MAX 10
+static cstate_t cpuidle_cstates[CPUIDLE_STATES_MAX];
+struct cpuidle_monitor cpuidle_sysfs_monitor;
+
+static unsigned long long **previous_count;
+static unsigned long long **current_count;
+struct timespec start_time;
+static unsigned long long timediff;
+
+static int cpuidle_get_count_percent(unsigned int id, double *percent,
+				     unsigned int cpu)
+{
+	unsigned long long statediff = current_count[cpu][id]
+		- previous_count[cpu][id];
+	dprint("%s: - diff: %llu - percent: %f (%u)\n",
+	       cpuidle_cstates[id].name, timediff, *percent, cpu);
+
+	if (timediff == 0)
+		*percent = 0.0;
+	else
+		*percent = ((100.0 * statediff) / timediff);
+
+	dprint("%s: - timediff: %llu - statediff: %llu - percent: %f (%u)\n",
+	       cpuidle_cstates[id].name, timediff, statediff, *percent, cpu);
+
+	return 0;
+}
+
+static int cpuidle_start(void)
+{
+	int cpu, state;
+	clock_gettime(CLOCK_REALTIME, &start_time);
+	for (cpu = 0; cpu < cpu_count; cpu++) {
+		for (state = 0; state < cpuidle_sysfs_monitor.hw_states_num;
+		     state++) {
+			previous_count[cpu][state] =
+				sysfs_get_idlestate_time(cpu, state);
+			dprint("CPU %d - State: %d - Val: %llu\n",
+			       cpu, state, previous_count[cpu][state]);
+		}
+	};
+	return 0;
+}
+
+static int cpuidle_stop(void)
+{
+	int cpu, state;
+	struct timespec end_time;
+	clock_gettime(CLOCK_REALTIME, &end_time);
+	timediff = timespec_diff_us(start_time, end_time);
+
+	for (cpu = 0; cpu < cpu_count; cpu++) {
+		for (state = 0; state < cpuidle_sysfs_monitor.hw_states_num;
+		     state++) {
+			current_count[cpu][state] =
+				sysfs_get_idlestate_time(cpu, state);
+			dprint("CPU %d - State: %d - Val: %llu\n",
+			       cpu, state, previous_count[cpu][state]);
+		}
+	};
+	return 0;
+}
+
+void fix_up_intel_idle_driver_name(char *tmp, int num)
+{
+	/* fix up cpuidle name for intel idle driver */
+	if (!strncmp(tmp, "NHM-", 4)) {
+		switch (num) {
+		case 1:
+			strcpy(tmp, "C1");
+			break;
+		case 2:
+			strcpy(tmp, "C3");
+			break;
+		case 3:
+			strcpy(tmp, "C6");
+			break;
+		}
+	} else if (!strncmp(tmp, "SNB-", 4)) {
+		switch (num) {
+		case 1:
+			strcpy(tmp, "C1");
+			break;
+		case 2:
+			strcpy(tmp, "C3");
+			break;
+		case 3:
+			strcpy(tmp, "C6");
+			break;
+		case 4:
+			strcpy(tmp, "C7");
+			break;
+		}
+	} else if (!strncmp(tmp, "ATM-", 4)) {
+		switch (num) {
+		case 1:
+			strcpy(tmp, "C1");
+			break;
+		case 2:
+			strcpy(tmp, "C2");
+			break;
+		case 3:
+			strcpy(tmp, "C4");
+			break;
+		case 4:
+			strcpy(tmp, "C6");
+			break;
+		}
+	}
+}
+
+static struct cpuidle_monitor *cpuidle_register(void)
+{
+	int num;
+	char *tmp;
+
+	/* Assume idle state count is the same for all CPUs */
+	cpuidle_sysfs_monitor.hw_states_num = sysfs_get_idlestate_count(0);
+
+	if (cpuidle_sysfs_monitor.hw_states_num == 0)
+		return NULL;
+
+	for (num = 0; num < cpuidle_sysfs_monitor.hw_states_num; num++) {
+		tmp = sysfs_get_idlestate_name(0, num);
+		if (tmp == NULL)
+			continue;
+
+		fix_up_intel_idle_driver_name(tmp, num);
+		strncpy(cpuidle_cstates[num].name, tmp, CSTATE_NAME_LEN - 1);
+		free(tmp);
+
+		tmp = sysfs_get_idlestate_desc(0, num);
+		if (tmp == NULL)
+			continue;
+		strncpy(cpuidle_cstates[num].desc, tmp,	CSTATE_DESC_LEN - 1);
+		free(tmp);
+
+		cpuidle_cstates[num].range = RANGE_THREAD;
+		cpuidle_cstates[num].id = num;
+		cpuidle_cstates[num].get_count_percent =
+			cpuidle_get_count_percent;
+	};
+
+	/* Free this at program termination */
+	previous_count = malloc(sizeof(long long *) * cpu_count);
+	current_count = malloc(sizeof(long long *) * cpu_count);
+	for (num = 0; num < cpu_count; num++) {
+		previous_count[num] = malloc(sizeof(long long) *
+					cpuidle_sysfs_monitor.hw_states_num);
+		current_count[num] = malloc(sizeof(long long) *
+					cpuidle_sysfs_monitor.hw_states_num);
+	}
+
+	cpuidle_sysfs_monitor.name_len = strlen(cpuidle_sysfs_monitor.name);
+	return &cpuidle_sysfs_monitor;
+}
+
+void cpuidle_unregister(void)
+{
+	int num;
+
+	for (num = 0; num < cpu_count; num++) {
+		free(previous_count[num]);
+		free(current_count[num]);
+	}
+	free(previous_count);
+	free(current_count);
+}
+
+struct cpuidle_monitor cpuidle_sysfs_monitor = {
+	.name			= "Idle_Stats",
+	.hw_states		= cpuidle_cstates,
+	.start			= cpuidle_start,
+	.stop			= cpuidle_stop,
+	.do_register		= cpuidle_register,
+	.unregister		= cpuidle_unregister,
+	.needs_root		= 0,
+	.overflow_s		= UINT_MAX,
+};
diff --git a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c
new file mode 100644
index 000000000000..ba4bf068380d
--- /dev/null
+++ b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c
@@ -0,0 +1,448 @@
+/*
+ *  (C) 2010,2011       Thomas Renninger <trenn@suse.de>, Novell Inc.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  Output format inspired by Len Brown's <lenb@kernel.org> turbostat tool.
+ *
+ */
+
+
+#include <stdio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <string.h>
+#include <time.h>
+#include <signal.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+#include <libgen.h>
+
+#include "idle_monitor/cpupower-monitor.h"
+#include "idle_monitor/idle_monitors.h"
+#include "helpers/helpers.h"
+
+/* Define pointers to all monitors.  */
+#define DEF(x) & x ## _monitor ,
+struct cpuidle_monitor *all_monitors[] = {
+#include "idle_monitors.def"
+0
+};
+
+static struct cpuidle_monitor *monitors[MONITORS_MAX];
+static unsigned int avail_monitors;
+
+static char *progname;
+
+enum operation_mode_e { list = 1, show, show_all };
+static int mode;
+static int interval = 1;
+static char *show_monitors_param;
+static struct cpupower_topology cpu_top;
+
+/* ToDo: Document this in the manpage */
+static char range_abbr[RANGE_MAX] = { 'T', 'C', 'P', 'M', };
+
+long long timespec_diff_us(struct timespec start, struct timespec end)
+{
+	struct timespec temp;
+	if ((end.tv_nsec - start.tv_nsec) < 0) {
+		temp.tv_sec = end.tv_sec - start.tv_sec - 1;
+		temp.tv_nsec = 1000000000 + end.tv_nsec - start.tv_nsec;
+	} else {
+		temp.tv_sec = end.tv_sec - start.tv_sec;
+		temp.tv_nsec = end.tv_nsec - start.tv_nsec;
+	}
+	return (temp.tv_sec * 1000000) + (temp.tv_nsec / 1000);
+}
+
+void monitor_help(void)
+{
+	printf(_("cpupower monitor: [-m <mon1>,[<mon2>],.. ] command\n"));
+	printf(_("cpupower monitor: [-m <mon1>,[<mon2>],.. ] [ -i interval_sec ]\n"));
+	printf(_("cpupower monitor: -l\n"));
+	printf(_("\t command: pass an arbitrary command to measure specific workload\n"));
+	printf(_("\t -i: time intervall to measure for in seconds (default 1)\n"));
+	printf(_("\t -l: list available CPU sleep monitors (for use with -m)\n"));
+	printf(_("\t -m: show specific CPU sleep monitors only (in same order)\n"));
+	printf(_("\t -h: print this help\n"));
+	printf("\n");
+	printf(_("only one of: -l, -m are allowed\nIf none of them is passed,"));
+	printf(_(" all supported monitors are shown\n"));
+}
+
+void print_n_spaces(int n)
+{
+	int x;
+	for (x = 0; x < n; x++)
+		printf(" ");
+}
+
+/* size of s must be at least n + 1 */
+int fill_string_with_spaces(char *s, int n)
+{
+	int len = strlen(s);
+	if (len > n)
+		return -1;
+	for (; len < n; len++)
+		s[len] = ' ';
+	s[len] = '\0';
+	return 0;
+}
+
+void print_header(int topology_depth)
+{
+	int unsigned mon;
+	int state, need_len, pr_mon_len;
+	cstate_t s;
+	char buf[128] = "";
+	int percent_width = 4;
+
+	fill_string_with_spaces(buf, topology_depth * 5 - 1);
+	printf("%s|", buf);
+
+	for (mon = 0; mon < avail_monitors; mon++) {
+		pr_mon_len = 0;
+		need_len = monitors[mon]->hw_states_num * (percent_width + 3)
+			- 1;
+		if (mon != 0) {
+			printf("|| ");
+			need_len--;
+		}
+		sprintf(buf, "%s", monitors[mon]->name);
+		fill_string_with_spaces(buf, need_len);
+		printf("%s", buf);
+	}
+	printf("\n");
+
+	if (topology_depth > 2)
+		printf("PKG |");
+	if (topology_depth > 1)
+		printf("CORE|");
+	if (topology_depth > 0)
+		printf("CPU |");
+
+	for (mon = 0; mon < avail_monitors; mon++) {
+		if (mon != 0)
+			printf("|| ");
+		else
+			printf(" ");
+		for (state = 0; state < monitors[mon]->hw_states_num; state++) {
+			if (state != 0)
+				printf(" | ");
+			s = monitors[mon]->hw_states[state];
+			sprintf(buf, "%s", s.name);
+			fill_string_with_spaces(buf, percent_width);
+			printf("%s", buf);
+		}
+		printf(" ");
+	}
+	printf("\n");
+}
+
+
+void print_results(int topology_depth, int cpu)
+{
+	unsigned int mon;
+	int state, ret;
+	double percent;
+	unsigned long long result;
+	cstate_t s;
+
+	if (topology_depth > 2)
+		printf("%4d|", cpu_top.core_info[cpu].pkg);
+	if (topology_depth > 1)
+		printf("%4d|", cpu_top.core_info[cpu].core);
+	if (topology_depth > 0)
+		printf("%4d|", cpu_top.core_info[cpu].cpu);
+
+	for (mon = 0; mon < avail_monitors; mon++) {
+		if (mon != 0)
+			printf("||");
+
+		for (state = 0; state < monitors[mon]->hw_states_num; state++) {
+			if (state != 0)
+				printf("|");
+
+			s = monitors[mon]->hw_states[state];
+
+			if (s.get_count_percent) {
+				ret = s.get_count_percent(s.id, &percent,
+						  cpu_top.core_info[cpu].cpu);
+				if (ret)
+					printf("******");
+				else if (percent >= 100.0)
+					printf("%6.1f", percent);
+				else
+					printf("%6.2f", percent);
+			} else if (s.get_count) {
+				ret = s.get_count(s.id, &result,
+						  cpu_top.core_info[cpu].cpu);
+				if (ret)
+					printf("******");
+				else
+					printf("%6llu", result);
+			} else {
+				printf(_("Monitor %s, Counter %s has no count "
+					 "function. Implementation error\n"),
+				       monitors[mon]->name, s.name);
+				exit(EXIT_FAILURE);
+			}
+		}
+	}
+	/* cpu offline */
+	if (cpu_top.core_info[cpu].pkg == -1 ||
+	    cpu_top.core_info[cpu].core == -1) {
+		printf(_(" *is offline\n"));
+		return;
+	} else
+		printf("\n");
+}
+
+
+/* param: string passed by -m param (The list of monitors to show)
+ *
+ * Monitors must have been registered already, matching monitors
+ * are picked out and available monitors array is overridden
+ * with matching ones
+ *
+ * Monitors get sorted in the same order the user passes them
+*/
+
+static void parse_monitor_param(char *param)
+{
+	unsigned int num;
+	int mon, hits = 0;
+	char *tmp = param, *token;
+	struct cpuidle_monitor *tmp_mons[MONITORS_MAX];
+
+
+	for (mon = 0; mon < MONITORS_MAX; mon++, tmp = NULL) {
+		token = strtok(tmp, ",");
+		if (token == NULL)
+			break;
+		if (strlen(token) >= MONITOR_NAME_LEN) {
+			printf(_("%s: max monitor name length"
+				 " (%d) exceeded\n"), token, MONITOR_NAME_LEN);
+			continue;
+		}
+
+		for (num = 0; num < avail_monitors; num++) {
+			if (!strcmp(monitors[num]->name, token)) {
+				dprint("Found requested monitor: %s\n", token);
+				tmp_mons[hits] = monitors[num];
+				hits++;
+			}
+		}
+	}
+	if (hits == 0) {
+		printf(_("No matching monitor found in %s, "
+			 "try -l option\n"), param);
+		monitor_help();
+		exit(EXIT_FAILURE);
+	}
+	/* Override detected/registerd monitors array with requested one */
+	memcpy(monitors, tmp_mons,
+		sizeof(struct cpuidle_monitor *) * MONITORS_MAX);
+	avail_monitors = hits;
+}
+
+void list_monitors(void)
+{
+	unsigned int mon;
+	int state;
+	cstate_t s;
+
+	for (mon = 0; mon < avail_monitors; mon++) {
+		printf(_("Monitor \"%s\" (%d states) - Might overflow after %u "
+			 "s\n"),
+			monitors[mon]->name, monitors[mon]->hw_states_num,
+			monitors[mon]->overflow_s);
+
+		for (state = 0; state < monitors[mon]->hw_states_num; state++) {
+			s = monitors[mon]->hw_states[state];
+			/*
+			 * ToDo show more state capabilities:
+			 * percent, time (granlarity)
+			 */
+			printf("%s\t[%c] -> %s\n", s.name, range_abbr[s.range],
+			       gettext(s.desc));
+		}
+	}
+}
+
+int fork_it(char **argv)
+{
+	int status;
+	unsigned int num;
+	unsigned long long timediff;
+	pid_t child_pid;
+	struct timespec start, end;
+
+	child_pid = fork();
+	clock_gettime(CLOCK_REALTIME, &start);
+
+	for (num = 0; num < avail_monitors; num++)
+		monitors[num]->start();
+
+	if (!child_pid) {
+		/* child */
+		execvp(argv[0], argv);
+	} else {
+		/* parent */
+		if (child_pid == -1) {
+			perror("fork");
+			exit(1);
+		}
+
+		signal(SIGINT, SIG_IGN);
+		signal(SIGQUIT, SIG_IGN);
+		if (waitpid(child_pid, &status, 0) == -1) {
+			perror("wait");
+			exit(1);
+		}
+	}
+	clock_gettime(CLOCK_REALTIME, &end);
+	for (num = 0; num < avail_monitors; num++)
+		monitors[num]->stop();
+
+	timediff = timespec_diff_us(start, end);
+	if (WIFEXITED(status))
+		printf(_("%s took %.5f seconds and exited with status %d\n"),
+			argv[0], timediff / (1000.0 * 1000),
+			WEXITSTATUS(status));
+	return 0;
+}
+
+int do_interval_measure(int i)
+{
+	unsigned int num;
+
+	for (num = 0; num < avail_monitors; num++) {
+		dprint("HW C-state residency monitor: %s - States: %d\n",
+		       monitors[num]->name, monitors[num]->hw_states_num);
+		monitors[num]->start();
+	}
+	sleep(i);
+	for (num = 0; num < avail_monitors; num++)
+		monitors[num]->stop();
+
+	return 0;
+}
+
+static void cmdline(int argc, char *argv[])
+{
+	int opt;
+	progname = basename(argv[0]);
+
+	while ((opt = getopt(argc, argv, "+hli:m:")) != -1) {
+		switch (opt) {
+		case 'h':
+			monitor_help();
+			exit(EXIT_SUCCESS);
+		case 'l':
+			if (mode) {
+				monitor_help();
+				exit(EXIT_FAILURE);
+			}
+			mode = list;
+			break;
+		case 'i':
+			/* only allow -i with -m or no option */
+			if (mode && mode != show) {
+				monitor_help();
+				exit(EXIT_FAILURE);
+			}
+			interval = atoi(optarg);
+			break;
+		case 'm':
+			if (mode) {
+				monitor_help();
+				exit(EXIT_FAILURE);
+			}
+			mode = show;
+			show_monitors_param = optarg;
+			break;
+		default:
+			monitor_help();
+			exit(EXIT_FAILURE);
+		}
+	}
+	if (!mode)
+		mode = show_all;
+}
+
+int cmd_monitor(int argc, char **argv)
+{
+	unsigned int num;
+	struct cpuidle_monitor *test_mon;
+	int cpu;
+
+	cmdline(argc, argv);
+	cpu_count = get_cpu_topology(&cpu_top);
+	if (cpu_count < 0) {
+		printf(_("Cannot read number of available processors\n"));
+		return EXIT_FAILURE;
+	}
+
+	dprint("System has up to %d CPU cores\n", cpu_count);
+
+	for (num = 0; all_monitors[num]; num++) {
+		dprint("Try to register: %s\n", all_monitors[num]->name);
+		test_mon = all_monitors[num]->do_register();
+		if (test_mon) {
+			if (test_mon->needs_root && !run_as_root) {
+				fprintf(stderr, _("Available monitor %s needs "
+					  "root access\n"), test_mon->name);
+				continue;
+			}
+			monitors[avail_monitors] = test_mon;
+			dprint("%s registered\n", all_monitors[num]->name);
+			avail_monitors++;
+		}
+	}
+
+	if (avail_monitors == 0) {
+		printf(_("No HW Cstate monitors found\n"));
+		return 1;
+	}
+
+	if (mode == list) {
+		list_monitors();
+		exit(EXIT_SUCCESS);
+	}
+
+	if (mode == show)
+		parse_monitor_param(show_monitors_param);
+
+	dprint("Packages: %d - Cores: %d - CPUs: %d\n",
+	       cpu_top.pkgs, cpu_top.cores, cpu_count);
+
+	/*
+	 * if any params left, it must be a command to fork
+	 */
+	if (argc - optind)
+		fork_it(argv + optind);
+	else
+		do_interval_measure(interval);
+
+	/* ToDo: Topology parsing needs fixing first to do
+	   this more generically */
+	if (cpu_top.pkgs > 1)
+		print_header(3);
+	else
+		print_header(1);
+
+	for (cpu = 0; cpu < cpu_count; cpu++) {
+		if (cpu_top.pkgs > 1)
+			print_results(3, cpu);
+		else
+			print_results(1, cpu);
+	}
+
+	for (num = 0; num < avail_monitors; num++)
+		monitors[num]->unregister();
+
+	cpu_topology_release(cpu_top);
+	return 0;
+}
diff --git a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h
new file mode 100644
index 000000000000..9312ee1f2dbc
--- /dev/null
+++ b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h
@@ -0,0 +1,68 @@
+/*
+ *  (C) 2010,2011       Thomas Renninger <trenn@suse.de>, Novell Inc.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ */
+
+#ifndef __CPUIDLE_INFO_HW__
+#define __CPUIDLE_INFO_HW__
+
+#include <stdarg.h>
+#include <time.h>
+
+#include "idle_monitor/idle_monitors.h"
+
+#define MONITORS_MAX 20
+#define MONITOR_NAME_LEN 20
+#define CSTATE_NAME_LEN 5
+#define CSTATE_DESC_LEN 60
+
+int cpu_count;
+
+/* Hard to define the right names ...: */
+enum power_range_e {
+	RANGE_THREAD,	/* Lowest in topology hierarcy, AMD: core, Intel: thread
+			   kernel sysfs: cpu */
+	RANGE_CORE,	/* AMD: unit, Intel: core, kernel_sysfs: core_id */
+	RANGE_PACKAGE,	/* Package, processor socket */
+	RANGE_MACHINE,	/* Machine, platform wide */
+	RANGE_MAX };
+
+typedef struct cstate {
+	int  id;
+	enum power_range_e range;
+	char name[CSTATE_NAME_LEN];
+	char desc[CSTATE_DESC_LEN];
+
+	/* either provide a percentage or a general count */
+	int (*get_count_percent)(unsigned int self_id, double *percent,
+				 unsigned int cpu);
+	int (*get_count)(unsigned int self_id, unsigned long long *count,
+			 unsigned int cpu);
+} cstate_t;
+
+struct cpuidle_monitor {
+	/* Name must not contain whitespaces */
+	char name[MONITOR_NAME_LEN];
+	int name_len;
+	int hw_states_num;
+	cstate_t *hw_states;
+	int (*start) (void);
+	int (*stop) (void);
+	struct cpuidle_monitor* (*do_register) (void);
+	void (*unregister)(void);
+	unsigned int overflow_s;
+	int needs_root;
+};
+
+extern long long timespec_diff_us(struct timespec start, struct timespec end);
+
+#define print_overflow_err(mes, ov)						\
+{										\
+	fprintf(stderr, gettext("Measure took %u seconds, but registers could "	\
+				"overflow at %u seconds, results "		\
+				"could be inaccurate\n"), mes, ov);		\
+}
+
+#endif /* __CPUIDLE_INFO_HW__ */
diff --git a/tools/power/cpupower/utils/idle_monitor/idle_monitors.def b/tools/power/cpupower/utils/idle_monitor/idle_monitors.def
new file mode 100644
index 000000000000..e3f8d9b2b18f
--- /dev/null
+++ b/tools/power/cpupower/utils/idle_monitor/idle_monitors.def
@@ -0,0 +1,7 @@
+#if defined(__i386__) || defined(__x86_64__)
+DEF(amd_fam14h)
+DEF(intel_nhm)
+DEF(intel_snb)
+DEF(mperf)
+#endif
+DEF(cpuidle_sysfs)
diff --git a/tools/power/cpupower/utils/idle_monitor/idle_monitors.h b/tools/power/cpupower/utils/idle_monitor/idle_monitors.h
new file mode 100644
index 000000000000..4fcdeb1e07e8
--- /dev/null
+++ b/tools/power/cpupower/utils/idle_monitor/idle_monitors.h
@@ -0,0 +1,18 @@
+/*
+ *  (C) 2010,2011       Thomas Renninger <trenn@suse.de>, Novell Inc.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  Based on the idea from Michael Matz <matz@suse.de>
+ *
+ */
+
+#ifndef _CPUIDLE_IDLE_MONITORS_H_
+#define _CPUIDLE_IDLE_MONITORS_H_
+
+#define DEF(x) extern struct cpuidle_monitor x ##_monitor;
+#include "idle_monitors.def"
+#undef DEF
+extern struct cpuidle_monitor *all_monitors[];
+
+#endif /* _CPUIDLE_IDLE_MONITORS_H_ */
diff --git a/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c b/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c
new file mode 100644
index 000000000000..63ca87a05e5f
--- /dev/null
+++ b/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c
@@ -0,0 +1,255 @@
+/*
+ *  (C) 2010,2011       Thomas Renninger <trenn@suse.de>, Novell Inc.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ */
+
+#if defined(__i386__) || defined(__x86_64__)
+
+#include <stdio.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+#include <limits.h>
+
+#include <cpufreq.h>
+
+#include "helpers/helpers.h"
+#include "idle_monitor/cpupower-monitor.h"
+
+#define MSR_APERF	0xE8
+#define MSR_MPERF	0xE7
+
+#define MSR_TSC	0x10
+
+enum mperf_id { C0 = 0, Cx, AVG_FREQ, MPERF_CSTATE_COUNT };
+
+static int mperf_get_count_percent(unsigned int self_id, double *percent,
+				   unsigned int cpu);
+static int mperf_get_count_freq(unsigned int id, unsigned long long *count,
+				unsigned int cpu);
+
+static cstate_t mperf_cstates[MPERF_CSTATE_COUNT] = {
+	{
+		.name			= "C0",
+		.desc			= N_("Processor Core not idle"),
+		.id			= C0,
+		.range			= RANGE_THREAD,
+		.get_count_percent	= mperf_get_count_percent,
+	},
+	{
+		.name			= "Cx",
+		.desc			= N_("Processor Core in an idle state"),
+		.id			= Cx,
+		.range			= RANGE_THREAD,
+		.get_count_percent	= mperf_get_count_percent,
+	},
+
+	{
+		.name			= "Freq",
+		.desc			= N_("Average Frequency (including boost) in MHz"),
+		.id			= AVG_FREQ,
+		.range			= RANGE_THREAD,
+		.get_count		= mperf_get_count_freq,
+	},
+};
+
+static unsigned long long tsc_at_measure_start;
+static unsigned long long tsc_at_measure_end;
+static unsigned long max_frequency;
+static unsigned long long *mperf_previous_count;
+static unsigned long long *aperf_previous_count;
+static unsigned long long *mperf_current_count;
+static unsigned long long *aperf_current_count;
+/* valid flag for all CPUs. If a MSR read failed it will be zero */
+static int *is_valid;
+
+static int mperf_get_tsc(unsigned long long *tsc)
+{
+	return read_msr(0, MSR_TSC, tsc);
+}
+
+static int mperf_init_stats(unsigned int cpu)
+{
+	unsigned long long val;
+	int ret;
+
+	ret = read_msr(cpu, MSR_APERF, &val);
+	aperf_previous_count[cpu] = val;
+	ret |= read_msr(cpu, MSR_MPERF, &val);
+	mperf_previous_count[cpu] = val;
+	is_valid[cpu] = !ret;
+
+	return 0;
+}
+
+static int mperf_measure_stats(unsigned int cpu)
+{
+	unsigned long long val;
+	int ret;
+
+	ret = read_msr(cpu, MSR_APERF, &val);
+	aperf_current_count[cpu] = val;
+	ret |= read_msr(cpu, MSR_MPERF, &val);
+	mperf_current_count[cpu] = val;
+	is_valid[cpu] = !ret;
+
+	return 0;
+}
+
+/*
+ * get_average_perf()
+ *
+ * Returns the average performance (also considers boosted frequencies)
+ *
+ * Input:
+ *   aperf_diff: Difference of the aperf register over a time period
+ *   mperf_diff: Difference of the mperf register over the same time period
+ *   max_freq:   Maximum frequency (P0)
+ *
+ * Returns:
+ *   Average performance over the time period
+ */
+static unsigned long get_average_perf(unsigned long long aperf_diff,
+				      unsigned long long mperf_diff)
+{
+	unsigned int perf_percent = 0;
+	if (((unsigned long)(-1) / 100) < aperf_diff) {
+		int shift_count = 7;
+		aperf_diff >>= shift_count;
+		mperf_diff >>= shift_count;
+	}
+	perf_percent = (aperf_diff * 100) / mperf_diff;
+	return (max_frequency * perf_percent) / 100;
+}
+
+static int mperf_get_count_percent(unsigned int id, double *percent,
+				   unsigned int cpu)
+{
+	unsigned long long aperf_diff, mperf_diff, tsc_diff;
+
+	if (!is_valid[cpu])
+		return -1;
+
+	if (id != C0 && id != Cx)
+		return -1;
+
+	mperf_diff = mperf_current_count[cpu] - mperf_previous_count[cpu];
+	aperf_diff = aperf_current_count[cpu] - aperf_previous_count[cpu];
+	tsc_diff = tsc_at_measure_end - tsc_at_measure_start;
+
+	*percent = 100.0 * mperf_diff / tsc_diff;
+	dprint("%s: mperf_diff: %llu, tsc_diff: %llu\n",
+	       mperf_cstates[id].name, mperf_diff, tsc_diff);
+
+	if (id == Cx)
+		*percent = 100.0 - *percent;
+
+	dprint("%s: previous: %llu - current: %llu - (%u)\n",
+		mperf_cstates[id].name, mperf_diff, aperf_diff, cpu);
+	dprint("%s: %f\n", mperf_cstates[id].name, *percent);
+	return 0;
+}
+
+static int mperf_get_count_freq(unsigned int id, unsigned long long *count,
+				unsigned int cpu)
+{
+	unsigned long long aperf_diff, mperf_diff;
+
+	if (id != AVG_FREQ)
+		return 1;
+
+	if (!is_valid[cpu])
+		return -1;
+
+	mperf_diff = mperf_current_count[cpu] - mperf_previous_count[cpu];
+	aperf_diff = aperf_current_count[cpu] - aperf_previous_count[cpu];
+
+	/* Return MHz for now, might want to return KHz if column width is more
+	   generic */
+	*count = get_average_perf(aperf_diff, mperf_diff) / 1000;
+	dprint("%s: %llu\n", mperf_cstates[id].name, *count);
+
+	return 0;
+}
+
+static int mperf_start(void)
+{
+	int cpu;
+	unsigned long long dbg;
+
+	mperf_get_tsc(&tsc_at_measure_start);
+
+	for (cpu = 0; cpu < cpu_count; cpu++)
+		mperf_init_stats(cpu);
+
+	mperf_get_tsc(&dbg);
+	dprint("TSC diff: %llu\n", dbg - tsc_at_measure_start);
+	return 0;
+}
+
+static int mperf_stop(void)
+{
+	unsigned long long dbg;
+	int cpu;
+
+	mperf_get_tsc(&tsc_at_measure_end);
+
+	for (cpu = 0; cpu < cpu_count; cpu++)
+		mperf_measure_stats(cpu);
+
+	mperf_get_tsc(&dbg);
+	dprint("TSC diff: %llu\n", dbg - tsc_at_measure_end);
+
+	return 0;
+}
+
+struct cpuidle_monitor mperf_monitor;
+
+struct cpuidle_monitor *mperf_register(void)
+{
+	unsigned long min;
+
+	if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_APERF))
+		return NULL;
+
+	/* Assume min/max all the same on all cores */
+	if (cpufreq_get_hardware_limits(0, &min, &max_frequency)) {
+		dprint("Cannot retrieve max freq from cpufreq kernel "
+		       "subsystem\n");
+		return NULL;
+	}
+
+	/* Free this at program termination */
+	is_valid = calloc(cpu_count, sizeof(int));
+	mperf_previous_count = calloc(cpu_count, sizeof(unsigned long long));
+	aperf_previous_count = calloc(cpu_count, sizeof(unsigned long long));
+	mperf_current_count = calloc(cpu_count, sizeof(unsigned long long));
+	aperf_current_count = calloc(cpu_count, sizeof(unsigned long long));
+
+	mperf_monitor.name_len = strlen(mperf_monitor.name);
+	return &mperf_monitor;
+}
+
+void mperf_unregister(void)
+{
+	free(mperf_previous_count);
+	free(aperf_previous_count);
+	free(mperf_current_count);
+	free(aperf_current_count);
+	free(is_valid);
+}
+
+struct cpuidle_monitor mperf_monitor = {
+	.name			= "Mperf",
+	.hw_states_num		= MPERF_CSTATE_COUNT,
+	.hw_states		= mperf_cstates,
+	.start			= mperf_start,
+	.stop			= mperf_stop,
+	.do_register		= mperf_register,
+	.unregister		= mperf_unregister,
+	.needs_root		= 1,
+	.overflow_s		= 922000000 /* 922337203 seconds TSC overflow
+					       at 20GHz */
+};
+#endif /* #if defined(__i386__) || defined(__x86_64__) */
diff --git a/tools/power/cpupower/utils/idle_monitor/nhm_idle.c b/tools/power/cpupower/utils/idle_monitor/nhm_idle.c
new file mode 100644
index 000000000000..d2a91dd0d563
--- /dev/null
+++ b/tools/power/cpupower/utils/idle_monitor/nhm_idle.c
@@ -0,0 +1,216 @@
+/*
+ *  (C) 2010,2011       Thomas Renninger <trenn@suse.de>, Novell Inc.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  Based on Len Brown's <lenb@kernel.org> turbostat tool.
+ */
+
+#if defined(__i386__) || defined(__x86_64__)
+
+#include <stdio.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include "helpers/helpers.h"
+#include "idle_monitor/cpupower-monitor.h"
+
+#define MSR_PKG_C3_RESIDENCY	0x3F8
+#define MSR_PKG_C6_RESIDENCY	0x3F9
+#define MSR_CORE_C3_RESIDENCY	0x3FC
+#define MSR_CORE_C6_RESIDENCY	0x3FD
+
+#define MSR_TSC	0x10
+
+#define NHM_CSTATE_COUNT 4
+
+enum intel_nhm_id { C3 = 0, C6, PC3, PC6, TSC = 0xFFFF };
+
+static int nhm_get_count_percent(unsigned int self_id, double *percent,
+				 unsigned int cpu);
+
+static cstate_t nhm_cstates[NHM_CSTATE_COUNT] = {
+	{
+		.name			= "C3",
+		.desc			= N_("Processor Core C3"),
+		.id			= C3,
+		.range			= RANGE_CORE,
+		.get_count_percent	= nhm_get_count_percent,
+	},
+	{
+		.name			= "C6",
+		.desc			= N_("Processor Core C6"),
+		.id			= C6,
+		.range			= RANGE_CORE,
+		.get_count_percent	= nhm_get_count_percent,
+	},
+
+	{
+		.name			= "PC3",
+		.desc			= N_("Processor Package C3"),
+		.id			= PC3,
+		.range			= RANGE_PACKAGE,
+		.get_count_percent	= nhm_get_count_percent,
+	},
+	{
+		.name			= "PC6",
+		.desc			= N_("Processor Package C6"),
+		.id			= PC6,
+		.range			= RANGE_PACKAGE,
+		.get_count_percent	= nhm_get_count_percent,
+	},
+};
+
+static unsigned long long tsc_at_measure_start;
+static unsigned long long tsc_at_measure_end;
+static unsigned long long *previous_count[NHM_CSTATE_COUNT];
+static unsigned long long *current_count[NHM_CSTATE_COUNT];
+/* valid flag for all CPUs. If a MSR read failed it will be zero */
+static int *is_valid;
+
+static int nhm_get_count(enum intel_nhm_id id, unsigned long long *val,
+			unsigned int cpu)
+{
+	int msr;
+
+	switch (id) {
+	case C3:
+		msr = MSR_CORE_C3_RESIDENCY;
+		break;
+	case C6:
+		msr = MSR_CORE_C6_RESIDENCY;
+		break;
+	case PC3:
+		msr = MSR_PKG_C3_RESIDENCY;
+		break;
+	case PC6:
+		msr = MSR_PKG_C6_RESIDENCY;
+		break;
+	case TSC:
+		msr = MSR_TSC;
+		break;
+	default:
+		return -1;
+	};
+	if (read_msr(cpu, msr, val))
+		return -1;
+
+	return 0;
+}
+
+static int nhm_get_count_percent(unsigned int id, double *percent,
+				 unsigned int cpu)
+{
+	*percent = 0.0;
+
+	if (!is_valid[cpu])
+		return -1;
+
+	*percent = (100.0 *
+		(current_count[id][cpu] - previous_count[id][cpu])) /
+		(tsc_at_measure_end - tsc_at_measure_start);
+
+	dprint("%s: previous: %llu - current: %llu - (%u)\n",
+		nhm_cstates[id].name, previous_count[id][cpu],
+		current_count[id][cpu], cpu);
+
+	dprint("%s: tsc_diff: %llu - count_diff: %llu - percent: %2.f (%u)\n",
+	       nhm_cstates[id].name,
+	       (unsigned long long) tsc_at_measure_end - tsc_at_measure_start,
+	       current_count[id][cpu] - previous_count[id][cpu],
+	       *percent, cpu);
+
+	return 0;
+}
+
+static int nhm_start(void)
+{
+	int num, cpu;
+	unsigned long long dbg, val;
+
+	nhm_get_count(TSC, &tsc_at_measure_start, 0);
+
+	for (num = 0; num < NHM_CSTATE_COUNT; num++) {
+		for (cpu = 0; cpu < cpu_count; cpu++) {
+			is_valid[cpu] = !nhm_get_count(num, &val, cpu);
+			previous_count[num][cpu] = val;
+		}
+	}
+	nhm_get_count(TSC, &dbg, 0);
+	dprint("TSC diff: %llu\n", dbg - tsc_at_measure_start);
+	return 0;
+}
+
+static int nhm_stop(void)
+{
+	unsigned long long val;
+	unsigned long long dbg;
+	int num, cpu;
+
+	nhm_get_count(TSC, &tsc_at_measure_end, 0);
+
+	for (num = 0; num < NHM_CSTATE_COUNT; num++) {
+		for (cpu = 0; cpu < cpu_count; cpu++) {
+			is_valid[cpu] = !nhm_get_count(num, &val, cpu);
+			current_count[num][cpu] = val;
+		}
+	}
+	nhm_get_count(TSC, &dbg, 0);
+	dprint("TSC diff: %llu\n", dbg - tsc_at_measure_end);
+
+	return 0;
+}
+
+struct cpuidle_monitor intel_nhm_monitor;
+
+struct cpuidle_monitor *intel_nhm_register(void)
+{
+	int num;
+
+	if (cpupower_cpu_info.vendor != X86_VENDOR_INTEL)
+		return NULL;
+
+	if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_INV_TSC))
+		return NULL;
+
+	if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_APERF))
+		return NULL;
+
+	/* Free this at program termination */
+	is_valid = calloc(cpu_count, sizeof(int));
+	for (num = 0; num < NHM_CSTATE_COUNT; num++) {
+		previous_count[num] = calloc(cpu_count,
+					sizeof(unsigned long long));
+		current_count[num]  = calloc(cpu_count,
+					sizeof(unsigned long long));
+	}
+
+	intel_nhm_monitor.name_len = strlen(intel_nhm_monitor.name);
+	return &intel_nhm_monitor;
+}
+
+void intel_nhm_unregister(void)
+{
+	int num;
+
+	for (num = 0; num < NHM_CSTATE_COUNT; num++) {
+		free(previous_count[num]);
+		free(current_count[num]);
+	}
+	free(is_valid);
+}
+
+struct cpuidle_monitor intel_nhm_monitor = {
+	.name			= "Nehalem",
+	.hw_states_num		= NHM_CSTATE_COUNT,
+	.hw_states		= nhm_cstates,
+	.start			= nhm_start,
+	.stop			= nhm_stop,
+	.do_register		= intel_nhm_register,
+	.unregister		= intel_nhm_unregister,
+	.needs_root		= 1,
+	.overflow_s		= 922000000 /* 922337203 seconds TSC overflow
+					       at 20GHz */
+};
+#endif
diff --git a/tools/power/cpupower/utils/idle_monitor/snb_idle.c b/tools/power/cpupower/utils/idle_monitor/snb_idle.c
new file mode 100644
index 000000000000..a1bc07cd53e1
--- /dev/null
+++ b/tools/power/cpupower/utils/idle_monitor/snb_idle.c
@@ -0,0 +1,190 @@
+/*
+ *  (C) 2010,2011       Thomas Renninger <trenn@suse.de>, Novell Inc.
+ *
+ *  Licensed under the terms of the GNU GPL License version 2.
+ *
+ *  Based on Len Brown's <lenb@kernel.org> turbostat tool.
+ */
+
+#if defined(__i386__) || defined(__x86_64__)
+
+#include <stdio.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include "helpers/helpers.h"
+#include "idle_monitor/cpupower-monitor.h"
+
+#define MSR_PKG_C2_RESIDENCY	0x60D
+#define MSR_PKG_C7_RESIDENCY	0x3FA
+#define MSR_CORE_C7_RESIDENCY	0x3FE
+
+#define MSR_TSC	0x10
+
+enum intel_snb_id { C7 = 0, PC2, PC7, SNB_CSTATE_COUNT, TSC = 0xFFFF };
+
+static int snb_get_count_percent(unsigned int self_id, double *percent,
+				 unsigned int cpu);
+
+static cstate_t snb_cstates[SNB_CSTATE_COUNT] = {
+	{
+		.name			= "C7",
+		.desc			= N_("Processor Core C7"),
+		.id			= C7,
+		.range			= RANGE_CORE,
+		.get_count_percent	= snb_get_count_percent,
+	},
+	{
+		.name			= "PC2",
+		.desc			= N_("Processor Package C2"),
+		.id			= PC2,
+		.range			= RANGE_PACKAGE,
+		.get_count_percent	= snb_get_count_percent,
+	},
+	{
+		.name			= "PC7",
+		.desc			= N_("Processor Package C7"),
+		.id			= PC7,
+		.range			= RANGE_PACKAGE,
+		.get_count_percent	= snb_get_count_percent,
+	},
+};
+
+static unsigned long long tsc_at_measure_start;
+static unsigned long long tsc_at_measure_end;
+static unsigned long long *previous_count[SNB_CSTATE_COUNT];
+static unsigned long long *current_count[SNB_CSTATE_COUNT];
+/* valid flag for all CPUs. If a MSR read failed it will be zero */
+static int *is_valid;
+
+static int snb_get_count(enum intel_snb_id id, unsigned long long *val,
+			unsigned int cpu)
+{
+	int msr;
+
+	switch (id) {
+	case C7:
+		msr = MSR_CORE_C7_RESIDENCY;
+		break;
+	case PC2:
+		msr = MSR_PKG_C2_RESIDENCY;
+		break;
+	case PC7:
+		msr = MSR_PKG_C7_RESIDENCY;
+		break;
+	case TSC:
+		msr = MSR_TSC;
+		break;
+	default:
+		return -1;
+	};
+	if (read_msr(cpu, msr, val))
+		return -1;
+	return 0;
+}
+
+static int snb_get_count_percent(unsigned int id, double *percent,
+				 unsigned int cpu)
+{
+	*percent = 0.0;
+
+	if (!is_valid[cpu])
+		return -1;
+
+	*percent = (100.0 *
+		(current_count[id][cpu] - previous_count[id][cpu])) /
+		(tsc_at_measure_end - tsc_at_measure_start);
+
+	dprint("%s: previous: %llu - current: %llu - (%u)\n",
+		snb_cstates[id].name, previous_count[id][cpu],
+		current_count[id][cpu], cpu);
+
+	dprint("%s: tsc_diff: %llu - count_diff: %llu - percent: %2.f (%u)\n",
+	       snb_cstates[id].name,
+	       (unsigned long long) tsc_at_measure_end - tsc_at_measure_start,
+	       current_count[id][cpu] - previous_count[id][cpu],
+	       *percent, cpu);
+
+	return 0;
+}
+
+static int snb_start(void)
+{
+	int num, cpu;
+	unsigned long long val;
+
+	for (num = 0; num < SNB_CSTATE_COUNT; num++) {
+		for (cpu = 0; cpu < cpu_count; cpu++) {
+			snb_get_count(num, &val, cpu);
+			previous_count[num][cpu] = val;
+		}
+	}
+	snb_get_count(TSC, &tsc_at_measure_start, 0);
+	return 0;
+}
+
+static int snb_stop(void)
+{
+	unsigned long long val;
+	int num, cpu;
+
+	snb_get_count(TSC, &tsc_at_measure_end, 0);
+
+	for (num = 0; num < SNB_CSTATE_COUNT; num++) {
+		for (cpu = 0; cpu < cpu_count; cpu++) {
+			is_valid[cpu] = !snb_get_count(num, &val, cpu);
+			current_count[num][cpu] = val;
+		}
+	}
+	return 0;
+}
+
+struct cpuidle_monitor intel_snb_monitor;
+
+static struct cpuidle_monitor *snb_register(void)
+{
+	int num;
+
+	if (cpupower_cpu_info.vendor != X86_VENDOR_INTEL
+	    || cpupower_cpu_info.family != 6)
+		return NULL;
+
+	if (cpupower_cpu_info.model != 0x2A
+	    && cpupower_cpu_info.model != 0x2D)
+		return NULL;
+
+	is_valid = calloc(cpu_count, sizeof(int));
+	for (num = 0; num < SNB_CSTATE_COUNT; num++) {
+		previous_count[num] = calloc(cpu_count,
+					sizeof(unsigned long long));
+		current_count[num]  = calloc(cpu_count,
+					sizeof(unsigned long long));
+	}
+	intel_snb_monitor.name_len = strlen(intel_snb_monitor.name);
+	return &intel_snb_monitor;
+}
+
+void snb_unregister(void)
+{
+	int num;
+	free(is_valid);
+	for (num = 0; num < SNB_CSTATE_COUNT; num++) {
+		free(previous_count[num]);
+		free(current_count[num]);
+	}
+}
+
+struct cpuidle_monitor intel_snb_monitor = {
+	.name			= "SandyBridge",
+	.hw_states		= snb_cstates,
+	.hw_states_num		= SNB_CSTATE_COUNT,
+	.start			= snb_start,
+	.stop			= snb_stop,
+	.do_register		= snb_register,
+	.unregister		= snb_unregister,
+	.needs_root		= 1,
+	.overflow_s		= 922000000 /* 922337203 seconds TSC overflow
+					       at 20GHz */
+};
+#endif /* defined(__i386__) || defined(__x86_64__) */
diff --git a/tools/power/cpupower/utils/version-gen.sh b/tools/power/cpupower/utils/version-gen.sh
new file mode 100755
index 000000000000..5ec41c556992
--- /dev/null
+++ b/tools/power/cpupower/utils/version-gen.sh
@@ -0,0 +1,35 @@
+#!/bin/sh
+#
+# Script which prints out the version to use for building cpupowerutils.
+# Must be called from tools/power/cpupower/
+# 
+# Heavily based on tools/perf/util/PERF-VERSION-GEN .
+
+LF='
+'
+
+# First check if there is a .git to get the version from git describe
+# otherwise try to get the version from the kernel makefile
+if test -d ../../../.git -o -f ../../../.git &&
+	VN=$(git describe --abbrev=4 HEAD 2>/dev/null) &&
+	case "$VN" in
+	*$LF*) (exit 1) ;;
+	v[0-9]*)
+		git update-index -q --refresh
+		test -z "$(git diff-index --name-only HEAD --)" ||
+		VN="$VN-dirty" ;;
+	esac
+then
+	VN=$(echo "$VN" | sed -e 's/-/./g');
+else
+	eval $(grep '^VERSION[[:space:]]*=' ../../../Makefile|tr -d ' ')
+	eval $(grep '^PATCHLEVEL[[:space:]]*=' ../../../Makefile|tr -d ' ')
+	eval $(grep '^SUBLEVEL[[:space:]]*=' ../../../Makefile|tr -d ' ')
+	eval $(grep '^EXTRAVERSION[[:space:]]*=' ../../../Makefile|tr -d ' ')
+
+	VN="${VERSION}.${PATCHLEVEL}.${SUBLEVEL}${EXTRAVERSION}"
+fi
+
+VN=$(expr "$VN" : v*'\(.*\)')
+
+echo $VN
diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index 6d8ef4a3a9b5..8b2d37b59c9e 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -128,34 +128,34 @@ unsigned long long get_msr(int cpu, off_t offset)
 void print_header(void)
 {
 	if (show_pkg)
-		fprintf(stderr, "pkg ");
+		fprintf(stderr, "pk");
 	if (show_core)
-		fprintf(stderr, "core");
+		fprintf(stderr, " cr");
 	if (show_cpu)
 		fprintf(stderr, " CPU");
 	if (do_nhm_cstates)
-		fprintf(stderr, "   %%c0 ");
+		fprintf(stderr, "    %%c0 ");
 	if (has_aperf)
-		fprintf(stderr, "  GHz");
+		fprintf(stderr, " GHz");
 	fprintf(stderr, "  TSC");
 	if (do_nhm_cstates)
-		fprintf(stderr, "   %%c1 ");
+		fprintf(stderr, "    %%c1");
 	if (do_nhm_cstates)
-		fprintf(stderr, "   %%c3 ");
+		fprintf(stderr, "    %%c3");
 	if (do_nhm_cstates)
-		fprintf(stderr, "   %%c6 ");
+		fprintf(stderr, "    %%c6");
 	if (do_snb_cstates)
-		fprintf(stderr, "   %%c7 ");
+		fprintf(stderr, "    %%c7");
 	if (do_snb_cstates)
-		fprintf(stderr, "  %%pc2 ");
+		fprintf(stderr, "  %%pc2");
 	if (do_nhm_cstates)
-		fprintf(stderr, "  %%pc3 ");
+		fprintf(stderr, "  %%pc3");
 	if (do_nhm_cstates)
-		fprintf(stderr, "  %%pc6 ");
+		fprintf(stderr, "  %%pc6");
 	if (do_snb_cstates)
-		fprintf(stderr, "  %%pc7 ");
+		fprintf(stderr, "  %%pc7");
 	if (extra_msr_offset)
-		fprintf(stderr, "       MSR 0x%x ", extra_msr_offset);
+		fprintf(stderr, "        MSR 0x%x ", extra_msr_offset);
 
 	putc('\n', stderr);
 }
@@ -194,14 +194,14 @@ void print_cnt(struct counters *p)
 	/* topology columns, print blanks on 1st (average) line */
 	if (p == cnt_average) {
 		if (show_pkg)
-			fprintf(stderr, "    ");
+			fprintf(stderr, " ");
 		if (show_core)
 			fprintf(stderr, "    ");
 		if (show_cpu)
 			fprintf(stderr, "    ");
 	} else {
 		if (show_pkg)
-			fprintf(stderr, "%4d", p->pkg);
+			fprintf(stderr, "%d", p->pkg);
 		if (show_core)
 			fprintf(stderr, "%4d", p->core);
 		if (show_cpu)
@@ -241,22 +241,22 @@ void print_cnt(struct counters *p)
 		if (!skip_c1)
 			fprintf(stderr, "%7.2f", 100.0 * p->c1/p->tsc);
 		else
-			fprintf(stderr, "   ****");
+			fprintf(stderr, "  ****");
 	}
 	if (do_nhm_cstates)
-		fprintf(stderr, "%7.2f", 100.0 * p->c3/p->tsc);
+		fprintf(stderr, " %6.2f", 100.0 * p->c3/p->tsc);
 	if (do_nhm_cstates)
-		fprintf(stderr, "%7.2f", 100.0 * p->c6/p->tsc);
+		fprintf(stderr, " %6.2f", 100.0 * p->c6/p->tsc);
 	if (do_snb_cstates)
-		fprintf(stderr, "%7.2f", 100.0 * p->c7/p->tsc);
+		fprintf(stderr, " %6.2f", 100.0 * p->c7/p->tsc);
 	if (do_snb_cstates)
-		fprintf(stderr, "%7.2f", 100.0 * p->pc2/p->tsc);
+		fprintf(stderr, " %5.2f", 100.0 * p->pc2/p->tsc);
 	if (do_nhm_cstates)
-		fprintf(stderr, "%7.2f", 100.0 * p->pc3/p->tsc);
+		fprintf(stderr, " %5.2f", 100.0 * p->pc3/p->tsc);
 	if (do_nhm_cstates)
-		fprintf(stderr, "%7.2f", 100.0 * p->pc6/p->tsc);
+		fprintf(stderr, " %5.2f", 100.0 * p->pc6/p->tsc);
 	if (do_snb_cstates)
-		fprintf(stderr, "%7.2f", 100.0 * p->pc7/p->tsc);
+		fprintf(stderr, " %5.2f", 100.0 * p->pc7/p->tsc);
 	if (extra_msr_offset)
 		fprintf(stderr, "  0x%016llx", p->extra_msr);
 	putc('\n', stderr);
diff --git a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c
index 2618ef2ba31f..33c5c7ee148f 100644
--- a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c
+++ b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c
@@ -137,7 +137,6 @@ void cmdline(int argc, char **argv)
 void validate_cpuid(void)
 {
 	unsigned int eax, ebx, ecx, edx, max_level;
-	char brand[16];
 	unsigned int fms, family, model, stepping;
 
 	eax = ebx = ecx = edx = 0;
@@ -160,8 +159,8 @@ void validate_cpuid(void)
 		model += ((fms >> 16) & 0xf) << 4;
 
 	if (verbose > 1)
-		printf("CPUID %s %d levels family:model:stepping "
-			"0x%x:%x:%x (%d:%d:%d)\n", brand, max_level,
+		printf("CPUID %d levels family:model:stepping "
+			"0x%x:%x:%x (%d:%d:%d)\n", max_level,
 			family, model, stepping, family, model, stepping);
 
 	if (!(edx & (1 << 5))) {
diff --git a/tools/slub/slabinfo.c b/tools/slub/slabinfo.c
index 516551c9f172..868cc93f7ac2 100644
--- a/tools/slub/slabinfo.c
+++ b/tools/slub/slabinfo.c
@@ -2,8 +2,9 @@
  * Slabinfo: Tool to get reports about slabs
  *
  * (C) 2007 sgi, Christoph Lameter
+ * (C) 2011 Linux Foundation, Christoph Lameter
  *
- * Compile by:
+ * Compile with:
  *
  * gcc -o slabinfo slabinfo.c
  */
@@ -39,6 +40,8 @@ struct slabinfo {
 	unsigned long cpuslab_flush, deactivate_full, deactivate_empty;
 	unsigned long deactivate_to_head, deactivate_to_tail;
 	unsigned long deactivate_remote_frees, order_fallback;
+	unsigned long cmpxchg_double_cpu_fail, cmpxchg_double_fail;
+	unsigned long alloc_node_mismatch, deactivate_bypass;
 	int numa[MAX_NODES];
 	int numa_partial[MAX_NODES];
 } slabinfo[MAX_SLABS];
@@ -99,7 +102,7 @@ static void fatal(const char *x, ...)
 
 static void usage(void)
 {
-	printf("slabinfo 5/7/2007. (c) 2007 sgi.\n\n"
+	printf("slabinfo 4/15/2011. (c) 2007 sgi/(c) 2011 Linux Foundation.\n\n"
 		"slabinfo [-ahnpvtsz] [-d debugopts] [slab-regexp]\n"
 		"-a|--aliases           Show aliases\n"
 		"-A|--activity          Most active slabs first\n"
@@ -293,7 +296,7 @@ int line = 0;
 static void first_line(void)
 {
 	if (show_activity)
-		printf("Name                   Objects      Alloc       Free   %%Fast Fallb O\n");
+		printf("Name                   Objects      Alloc       Free   %%Fast Fallb O CmpX   UL\n");
 	else
 		printf("Name                   Objects Objsize    Space "
 			"Slabs/Part/Cpu  O/S O %%Fr %%Ef Flg\n");
@@ -379,14 +382,14 @@ static void show_tracking(struct slabinfo *s)
 	printf("\n%s: Kernel object allocation\n", s->name);
 	printf("-----------------------------------------------------------------------\n");
 	if (read_slab_obj(s, "alloc_calls"))
-		printf(buffer);
+		printf("%s", buffer);
 	else
 		printf("No Data\n");
 
 	printf("\n%s: Kernel object freeing\n", s->name);
 	printf("------------------------------------------------------------------------\n");
 	if (read_slab_obj(s, "free_calls"))
-		printf(buffer);
+		printf("%s", buffer);
 	else
 		printf("No Data\n");
 
@@ -400,7 +403,7 @@ static void ops(struct slabinfo *s)
 	if (read_slab_obj(s, "ops")) {
 		printf("\n%s: kmem_cache operations\n", s->name);
 		printf("--------------------------------------------\n");
-		printf(buffer);
+		printf("%s", buffer);
 	} else
 		printf("\n%s has no kmem_cache operations\n", s->name);
 }
@@ -462,19 +465,32 @@ static void slab_stats(struct slabinfo *s)
 	if (s->cpuslab_flush)
 		printf("Flushes %8lu\n", s->cpuslab_flush);
 
-	if (s->alloc_refill)
-		printf("Refill %8lu\n", s->alloc_refill);
-
 	total = s->deactivate_full + s->deactivate_empty +
-			s->deactivate_to_head + s->deactivate_to_tail;
-
-	if (total)
-		printf("Deactivate Full=%lu(%lu%%) Empty=%lu(%lu%%) "
-			"ToHead=%lu(%lu%%) ToTail=%lu(%lu%%)\n",
-			s->deactivate_full, (s->deactivate_full * 100) / total,
-			s->deactivate_empty, (s->deactivate_empty * 100) / total,
-			s->deactivate_to_head, (s->deactivate_to_head * 100) / total,
+			s->deactivate_to_head + s->deactivate_to_tail + s->deactivate_bypass;
+
+	if (total) {
+		printf("\nSlab Deactivation             Ocurrences  %%\n");
+		printf("-------------------------------------------------\n");
+		printf("Slab full                     %7lu  %3lu%%\n",
+			s->deactivate_full, (s->deactivate_full * 100) / total);
+		printf("Slab empty                    %7lu  %3lu%%\n",
+			s->deactivate_empty, (s->deactivate_empty * 100) / total);
+		printf("Moved to head of partial list %7lu  %3lu%%\n",
+			s->deactivate_to_head, (s->deactivate_to_head * 100) / total);
+		printf("Moved to tail of partial list %7lu  %3lu%%\n",
 			s->deactivate_to_tail, (s->deactivate_to_tail * 100) / total);
+		printf("Deactivation bypass           %7lu  %3lu%%\n",
+			s->deactivate_bypass, (s->deactivate_bypass * 100) / total);
+		printf("Refilled from foreign frees   %7lu  %3lu%%\n",
+			s->alloc_refill, (s->alloc_refill * 100) / total);
+		printf("Node mismatch                 %7lu  %3lu%%\n",
+			s->alloc_node_mismatch, (s->alloc_node_mismatch * 100) / total);
+	}
+
+	if (s->cmpxchg_double_fail || s->cmpxchg_double_cpu_fail)
+		printf("\nCmpxchg_double Looping\n------------------------\n");
+		printf("Locked Cmpxchg Double redos   %lu\nUnlocked Cmpxchg Double redos %lu\n",
+			s->cmpxchg_double_fail, s->cmpxchg_double_cpu_fail);
 }
 
 static void report(struct slabinfo *s)
@@ -573,12 +589,13 @@ static void slabcache(struct slabinfo *s)
 		total_alloc = s->alloc_fastpath + s->alloc_slowpath;
 		total_free = s->free_fastpath + s->free_slowpath;
 
-		printf("%-21s %8ld %10ld %10ld %3ld %3ld %5ld %1d\n",
+		printf("%-21s %8ld %10ld %10ld %3ld %3ld %5ld %1d %4ld %4ld\n",
 			s->name, s->objects,
 			total_alloc, total_free,
 			total_alloc ? (s->alloc_fastpath * 100 / total_alloc) : 0,
 			total_free ? (s->free_fastpath * 100 / total_free) : 0,
-			s->order_fallback, s->order);
+			s->order_fallback, s->order, s->cmpxchg_double_fail,
+			s->cmpxchg_double_cpu_fail);
 	}
 	else
 		printf("%-21s %8ld %7d %8s %14s %4d %1d %3ld %3ld %s\n",
@@ -1190,6 +1207,10 @@ static void read_slab_dir(void)
 			slab->deactivate_to_tail = get_obj("deactivate_to_tail");
 			slab->deactivate_remote_frees = get_obj("deactivate_remote_frees");
 			slab->order_fallback = get_obj("order_fallback");
+			slab->cmpxchg_double_cpu_fail = get_obj("cmpxchg_double_cpu_fail");
+			slab->cmpxchg_double_fail = get_obj("cmpxchg_double_fail");
+			slab->alloc_node_mismatch = get_obj("alloc_node_mismatch");
+			slab->deactivate_bypass = get_obj("deactivate_bypass");
 			chdir("..");
 			if (slab->name[0] == ':')
 				alias_targets++;
diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl
index cef28e6632b9..8d02ccb10c59 100755
--- a/tools/testing/ktest/ktest.pl
+++ b/tools/testing/ktest/ktest.pl
@@ -27,7 +27,7 @@ $default{"TEST_TYPE"}		= "test";
 $default{"BUILD_TYPE"}		= "randconfig";
 $default{"MAKE_CMD"}		= "make";
 $default{"TIMEOUT"}		= 120;
-$default{"TMP_DIR"}		= "/tmp/ktest";
+$default{"TMP_DIR"}		= "/tmp/ktest/\${MACHINE}";
 $default{"SLEEP_TIME"}		= 60;	# sleep time between tests
 $default{"BUILD_NOCLEAN"}	= 0;
 $default{"REBOOT_ON_ERROR"}	= 0;
@@ -41,6 +41,7 @@ $default{"CLEAR_LOG"}		= 0;
 $default{"BISECT_MANUAL"}	= 0;
 $default{"BISECT_SKIP"}		= 1;
 $default{"SUCCESS_LINE"}	= "login:";
+$default{"DETECT_TRIPLE_FAULT"} = 1;
 $default{"BOOTED_TIMEOUT"}	= 1;
 $default{"DIE_ON_FAILURE"}	= 1;
 $default{"SSH_EXEC"}		= "ssh \$SSH_USER\@\$MACHINE \$SSH_COMMAND";
@@ -62,6 +63,10 @@ my $output_config;
 my $test_type;
 my $build_type;
 my $build_options;
+my $pre_build;
+my $post_build;
+my $pre_build_die;
+my $post_build_die;
 my $reboot_type;
 my $reboot_script;
 my $power_cycle;
@@ -81,12 +86,17 @@ my $make;
 my $post_install;
 my $noclean;
 my $minconfig;
+my $start_minconfig;
+my $start_minconfig_defined;
+my $output_minconfig;
+my $ignore_config;
 my $addconfig;
 my $in_bisect = 0;
 my $bisect_bad = "";
 my $reverse_bisect;
 my $bisect_manual;
 my $bisect_skip;
+my $config_bisect_good;
 my $in_patchcheck = 0;
 my $run_test;
 my $redirect;
@@ -98,9 +108,12 @@ my $monitor_cnt = 0;
 my $sleep_time;
 my $bisect_sleep_time;
 my $patchcheck_sleep_time;
+my $ignore_warnings;
 my $store_failures;
+my $test_name;
 my $timeout;
 my $booted_timeout;
+my $detect_triplefault;
 my $console;
 my $success_line;
 my $stop_after_success;
@@ -115,6 +128,7 @@ my $successes = 0;
 my %entered_configs;
 my %config_help;
 my %variable;
+my %force_config;
 
 $config_help{"MACHINE"} = << "EOF"
  The machine hostname that you will test.
@@ -204,6 +218,26 @@ $config_help{"REBOOT_SCRIPT"} = << "EOF"
 EOF
     ;
 
+sub read_yn {
+    my ($prompt) = @_;
+
+    my $ans;
+
+    for (;;) {
+	print "$prompt [Y/n] ";
+	$ans = <STDIN>;
+	chomp $ans;
+	if ($ans =~ /^\s*$/) {
+	    $ans = "y";
+	}
+	last if ($ans =~ /^y$/i || $ans =~ /^n$/i);
+	print "Please answer either 'y' or 'n'.\n";
+    }
+    if ($ans !~ /^y$/i) {
+	return 0;
+    }
+    return 1;
+}
 
 sub get_ktest_config {
     my ($config) = @_;
@@ -335,6 +369,7 @@ sub read_config {
     my $num_tests_set = 0;
     my $skip = 0;
     my $rest;
+    my $test_case = 0;
 
     while (<IN>) {
 
@@ -360,6 +395,7 @@ sub read_config {
 		$rest = $1;
 		$skip = 1;
 	    } else {
+		$test_case = 1;
 		$skip = 0;
 	    }
 
@@ -464,6 +500,15 @@ sub read_config {
     # make sure we have all mandatory configs
     get_ktest_configs;
 
+    # was a test specified?
+    if (!$test_case) {
+	print "No test case specified.\n";
+	print "What test case would you like to run?\n";
+	my $ans = <STDIN>;
+	chomp $ans;
+	$default{"TEST_TYPE"} = $ans;
+    }
+
     # set any defaults
 
     foreach my $default (keys %default) {
@@ -473,6 +518,69 @@ sub read_config {
     }
 }
 
+sub __eval_option {
+    my ($option, $i) = @_;
+
+    # Add space to evaluate the character before $
+    $option = " $option";
+    my $retval = "";
+
+    while ($option =~ /(.*?[^\\])\$\{(.*?)\}(.*)/) {
+	my $start = $1;
+	my $var = $2;
+	my $end = $3;
+
+	# Append beginning of line
+	$retval = "$retval$start";
+
+	# If the iteration option OPT[$i] exists, then use that.
+	# otherwise see if the default OPT (without [$i]) exists.
+
+	my $o = "$var\[$i\]";
+
+	if (defined($opt{$o})) {
+	    $o = $opt{$o};
+	    $retval = "$retval$o";
+	} elsif (defined($opt{$var})) {
+	    $o = $opt{$var};
+	    $retval = "$retval$o";
+	} else {
+	    $retval = "$retval\$\{$var\}";
+	}
+
+	$option = $end;
+    }
+
+    $retval = "$retval$option";
+
+    $retval =~ s/^ //;
+
+    return $retval;
+}
+
+sub eval_option {
+    my ($option, $i) = @_;
+
+    my $prev = "";
+
+    # Since an option can evaluate to another option,
+    # keep iterating until we do not evaluate any more
+    # options.
+    my $r = 0;
+    while ($prev ne $option) {
+	# Check for recursive evaluations.
+	# 100 deep should be more than enough.
+	if ($r++ > 100) {
+	    die "Over 100 evaluations accurred with $option\n" .
+		"Check for recursive variables\n";
+	}
+	$prev = $option;
+	$option = __eval_option($option, $i);
+    }
+
+    return $option;
+}
+
 sub _logit {
     if (defined($opt{"LOG_FILE"})) {
 	open(OUT, ">> $opt{LOG_FILE}") or die "Can't write to $opt{LOG_FILE}";
@@ -617,9 +725,15 @@ sub fail {
 	    end_monitor;
 	}
 
+	my $name = "";
+
+	if (defined($test_name)) {
+	    $name = " ($test_name)";
+	}
+
 	doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
 	doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
-	doprint "KTEST RESULT: TEST $i Failed: ", @_, "\n";
+	doprint "KTEST RESULT: TEST $i$name Failed: ", @_, "\n";
 	doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
 	doprint "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%\n";
 
@@ -836,17 +950,35 @@ sub monitor {
     my $failure_start;
     my $monitor_start = time;
     my $done = 0;
+    my $version_found = 0;
 
     while (!$done) {
 
-	if ($booted) {
+	if ($bug && defined($stop_after_failure) &&
+	    $stop_after_failure >= 0) {
+	    my $time = $stop_after_failure - (time - $failure_start);
+	    $line = wait_for_input($monitor_fp, $time);
+	    if (!defined($line)) {
+		doprint "bug timed out after $booted_timeout seconds\n";
+		doprint "Test forced to stop after $stop_after_failure seconds after failure\n";
+		last;
+	    }
+	} elsif ($booted) {
 	    $line = wait_for_input($monitor_fp, $booted_timeout);
+	    if (!defined($line)) {
+		my $s = $booted_timeout == 1 ? "" : "s";
+		doprint "Successful boot found: break after $booted_timeout second$s\n";
+		last;
+	    }
 	} else {
 	    $line = wait_for_input($monitor_fp);
+	    if (!defined($line)) {
+		my $s = $timeout == 1 ? "" : "s";
+		doprint "Timed out after $timeout second$s\n";
+		last;
+	    }
 	}
 
-	last if (!defined($line));
-
 	doprint $line;
 	print DMESG $line;
 
@@ -896,6 +1028,22 @@ sub monitor {
 	    $bug = 1;
 	}
 
+	# Detect triple faults by testing the banner
+	if ($full_line =~ /\bLinux version (\S+).*\n/) {
+	    if ($1 eq $version) {
+		$version_found = 1;
+	    } elsif ($version_found && $detect_triplefault) {
+		# We already booted into the kernel we are testing,
+		# but now we booted into another kernel?
+		# Consider this a triple fault.
+		doprint "Aleady booted in Linux kernel $version, but now\n";
+		doprint "we booted into Linux kernel $1.\n";
+		doprint "Assuming that this is a triple fault.\n";
+		doprint "To disable this: set DETECT_TRIPLE_FAULT to 0\n";
+		last;
+	    }
+	}
+
 	if ($line =~ /\n/) {
 	    $full_line = "";
 	}
@@ -923,6 +1071,16 @@ sub monitor {
     return 1;
 }
 
+sub do_post_install {
+
+    return if (!defined($post_install));
+
+    my $cp_post_install = $post_install;
+    $cp_post_install =~ s/\$KERNEL_VERSION/$version/g;
+    run_command "$cp_post_install" or
+	dodie "Failed to run post install";
+}
+
 sub install {
 
     run_scp "$outputdir/$build_target", "$target_image" or
@@ -942,6 +1100,7 @@ sub install {
     close(IN);
 
     if (!$install_mods) {
+	do_post_install;
 	doprint "No modules needed\n";
 	return;
     }
@@ -964,17 +1123,29 @@ sub install {
 
     unlink "$tmpdir/$modtar";
 
-    run_ssh "'(cd / && tar xf /tmp/$modtar)'" or
+    run_ssh "'(cd / && tar xjf /tmp/$modtar)'" or
 	dodie "failed to tar modules";
 
     run_ssh "rm -f /tmp/$modtar";
 
-    return if (!defined($post_install));
+    do_post_install;
+}
 
-    my $cp_post_install = $post_install;
-    $cp_post_install =~ s/\$KERNEL_VERSION/$version/g;
-    run_command "$cp_post_install" or
-	dodie "Failed to run post install";
+sub get_version {
+    # get the release name
+    doprint "$make kernelrelease ... ";
+    $version = `$make kernelrelease | tail -1`;
+    chomp($version);
+    doprint "$version\n";
+}
+
+sub start_monitor_and_boot {
+    get_grub_index;
+    get_version;
+    install;
+
+    start_monitor;
+    return monitor;
 }
 
 sub check_buildlog {
@@ -1009,24 +1180,84 @@ sub check_buildlog {
     return 1;
 }
 
+sub apply_min_config {
+    my $outconfig = "$output_config.new";
+
+    # Read the config file and remove anything that
+    # is in the force_config hash (from minconfig and others)
+    # then add the force config back.
+
+    doprint "Applying minimum configurations into $output_config.new\n";
+
+    open (OUT, ">$outconfig") or
+	dodie "Can't create $outconfig";
+
+    if (-f $output_config) {
+	open (IN, $output_config) or
+	    dodie "Failed to open $output_config";
+	while (<IN>) {
+	    if (/^(# )?(CONFIG_[^\s=]*)/) {
+		next if (defined($force_config{$2}));
+	    }
+	    print OUT;
+	}
+	close IN;
+    }
+    foreach my $config (keys %force_config) {
+	print OUT "$force_config{$config}\n";
+    }
+    close OUT;
+
+    run_command "mv $outconfig $output_config";
+}
+
 sub make_oldconfig {
-    my ($defconfig) = @_;
 
-    if (!run_command "$defconfig $make oldnoconfig") {
+    my @force_list = keys %force_config;
+
+    if ($#force_list >= 0) {
+	apply_min_config;
+    }
+
+    if (!run_command "$make oldnoconfig") {
 	# Perhaps oldnoconfig doesn't exist in this version of the kernel
 	# try a yes '' | oldconfig
 	doprint "oldnoconfig failed, trying yes '' | make oldconfig\n";
-	run_command "yes '' | $defconfig $make oldconfig" or
+	run_command "yes '' | $make oldconfig" or
 	    dodie "failed make config oldconfig";
     }
 }
 
+# read a config file and use this to force new configs.
+sub load_force_config {
+    my ($config) = @_;
+
+    open(IN, $config) or
+	dodie "failed to read $config";
+    while (<IN>) {
+	chomp;
+	if (/^(CONFIG[^\s=]*)(\s*=.*)/) {
+	    $force_config{$1} = $_;
+	} elsif (/^# (CONFIG_\S*) is not set/) {
+	    $force_config{$1} = $_;
+	}
+    }
+    close IN;
+}
+
 sub build {
     my ($type) = @_;
-    my $defconfig = "";
 
     unlink $buildlog;
 
+    if (defined($pre_build)) {
+	my $ret = run_command $pre_build;
+	if (!$ret && defined($pre_build_die) &&
+	    $pre_build_die) {
+	    dodie "failed to pre_build\n";
+	}
+    }
+
     if ($type =~ /^useconfig:(.*)/) {
 	run_command "cp $1 $output_config" or
 	    dodie "could not copy $1 to .config";
@@ -1063,24 +1294,33 @@ sub build {
     close(OUT);
 
     if (defined($minconfig)) {
-	$defconfig = "KCONFIG_ALLCONFIG=$minconfig";
+	load_force_config($minconfig);
     }
 
-    if ($type eq "oldnoconfig") {
-	make_oldconfig $defconfig;
-    } else {
-	run_command "$defconfig $make $type" or
+    if ($type ne "oldnoconfig") {
+	run_command "$make $type" or
 	    dodie "failed make config";
     }
+    # Run old config regardless, to enforce min configurations
+    make_oldconfig;
 
     $redirect = "$buildlog";
-    if (!run_command "$make $build_options") {
-	undef $redirect;
+    my $build_ret = run_command "$make $build_options";
+    undef $redirect;
+
+    if (defined($post_build)) {
+	my $ret = run_command $post_build;
+	if (!$ret && defined($post_build_die) &&
+	    $post_build_die) {
+	    dodie "failed to post_build\n";
+	}
+    }
+
+    if (!$build_ret) {
 	# bisect may need this to pass
 	return 0 if ($in_bisect);
 	fail "failed build" and return 0;
     }
-    undef $redirect;
 
     return 1;
 }
@@ -1102,9 +1342,15 @@ sub success {
 
     $successes++;
 
+    my $name = "";
+
+    if (defined($test_name)) {
+	$name = " ($test_name)";
+    }
+
     doprint "\n\n*******************************************\n";
     doprint     "*******************************************\n";
-    doprint     "KTEST RESULT: TEST $i SUCCESS!!!!         **\n";
+    doprint     "KTEST RESULT: TEST $i$name SUCCESS!!!!         **\n";
     doprint     "*******************************************\n";
     doprint     "*******************************************\n";
 
@@ -1117,14 +1363,6 @@ sub success {
     }
 }
 
-sub get_version {
-    # get the release name
-    doprint "$make kernelrelease ... ";
-    $version = `$make kernelrelease | tail -1`;
-    chomp($version);
-    doprint "$version\n";
-}
-
 sub answer_bisect {
     for (;;) {
 	doprint "Pass or fail? [p/f]";
@@ -1289,12 +1527,7 @@ sub run_bisect_test {
 	dodie "Failed on build" if $failed;
 
 	# Now boot the box
-	get_grub_index;
-	get_version;
-	install;
-
-	start_monitor;
-	monitor or $failed = 1;
+	start_monitor_and_boot or $failed = 1;
 
 	if ($type ne "boot") {
 	    if ($failed && $bisect_skip) {
@@ -1473,21 +1706,27 @@ my %null_config;
 
 my %dependency;
 
-sub process_config_ignore {
-    my ($config) = @_;
+sub assign_configs {
+    my ($hash, $config) = @_;
 
     open (IN, $config)
 	or dodie "Failed to read $config";
 
     while (<IN>) {
 	if (/^((CONFIG\S*)=.*)/) {
-	    $config_ignore{$2} = $1;
+	    ${$hash}{$2} = $1;
 	}
     }
 
     close(IN);
 }
 
+sub process_config_ignore {
+    my ($config) = @_;
+
+    assign_configs \%config_ignore, $config;
+}
+
 sub read_current_config {
     my ($config_ref) = @_;
 
@@ -1546,7 +1785,7 @@ sub create_config {
     close(OUT);
 
 #    exit;
-    make_oldconfig "";
+    make_oldconfig;
 }
 
 sub compare_configs {
@@ -1718,6 +1957,10 @@ sub config_bisect {
 
     my $tmpconfig = "$tmpdir/use_config";
 
+    if (defined($config_bisect_good)) {
+	process_config_ignore $config_bisect_good;
+    }
+
     # Make the file with the bad config and the min config
     if (defined($minconfig)) {
 	# read the min config for things to ignore
@@ -1727,15 +1970,8 @@ sub config_bisect {
 	unlink $tmpconfig;
     }
 
-    # Add other configs
-    if (defined($addconfig)) {
-	run_command "cat $addconfig >> $tmpconfig" or
-	    dodie "failed to append $addconfig";
-    }
-
-    my $defconfig = "";
     if (-f $tmpconfig) {
-	$defconfig = "KCONFIG_ALLCONFIG=$tmpconfig";
+	load_force_config($tmpconfig);
 	process_config_ignore $tmpconfig;
     }
 
@@ -1755,8 +1991,8 @@ sub config_bisect {
     }
     close(IN);
 
-    # Now run oldconfig with the minconfig (and addconfigs)
-    make_oldconfig $defconfig;
+    # Now run oldconfig with the minconfig
+    make_oldconfig;
 
     # check to see what we lost (or gained)
     open (IN, $output_config)
@@ -1882,6 +2118,13 @@ sub patchcheck {
     @list = reverse @list;
 
     my $save_clean = $noclean;
+    my %ignored_warnings;
+
+    if (defined($ignore_warnings)) {
+	foreach my $sha1 (split /\s+/, $ignore_warnings) {
+	    $ignored_warnings{$sha1} = 1;
+	}
+    }
 
     $in_patchcheck = 1;
     foreach my $item (@list) {
@@ -1908,18 +2151,16 @@ sub patchcheck {
 	    build "oldconfig" or return 0;
 	}
 
-	check_buildlog $sha1 or return 0;
 
-	next if ($type eq "build");
+	if (!defined($ignored_warnings{$sha1})) {
+	    check_buildlog $sha1 or return 0;
+	}
 
-	get_grub_index;
-	get_version;
-	install;
+	next if ($type eq "build");
 
 	my $failed = 0;
 
-	start_monitor;
-	monitor or $failed = 1;
+	start_monitor_and_boot or $failed = 1;
 
 	if (!$failed && $type ne "boot"){
 	    do_run_test or $failed = 1;
@@ -1936,24 +2177,505 @@ sub patchcheck {
     return 1;
 }
 
+my %depends;
+my $iflevel = 0;
+my @ifdeps;
+
+# prevent recursion
+my %read_kconfigs;
+
+# taken from streamline_config.pl
+sub read_kconfig {
+    my ($kconfig) = @_;
+
+    my $state = "NONE";
+    my $config;
+    my @kconfigs;
+
+    my $cont = 0;
+    my $line;
+
+
+    if (! -f $kconfig) {
+	doprint "file $kconfig does not exist, skipping\n";
+	return;
+    }
+
+    open(KIN, "$kconfig")
+	or die "Can't open $kconfig";
+    while (<KIN>) {
+	chomp;
+
+	# Make sure that lines ending with \ continue
+	if ($cont) {
+	    $_ = $line . " " . $_;
+	}
+
+	if (s/\\$//) {
+	    $cont = 1;
+	    $line = $_;
+	    next;
+	}
+
+	$cont = 0;
+
+	# collect any Kconfig sources
+	if (/^source\s*"(.*)"/) {
+	    $kconfigs[$#kconfigs+1] = $1;
+	}
+
+	# configs found
+	if (/^\s*(menu)?config\s+(\S+)\s*$/) {
+	    $state = "NEW";
+	    $config = $2;
+
+	    for (my $i = 0; $i < $iflevel; $i++) {
+		if ($i) {
+		    $depends{$config} .= " " . $ifdeps[$i];
+		} else {
+		    $depends{$config} = $ifdeps[$i];
+		}
+		$state = "DEP";
+	    }
+
+	# collect the depends for the config
+	} elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) {
+
+	    if (defined($depends{$1})) {
+		$depends{$config} .= " " . $1;
+	    } else {
+		$depends{$config} = $1;
+	    }
+
+	# Get the configs that select this config
+	} elsif ($state ne "NONE" && /^\s*select\s+(\S+)/) {
+	    if (defined($depends{$1})) {
+		$depends{$1} .= " " . $config;
+	    } else {
+		$depends{$1} = $config;
+	    }
+
+	# Check for if statements
+	} elsif (/^if\s+(.*\S)\s*$/) {
+	    my $deps = $1;
+	    # remove beginning and ending non text
+	    $deps =~ s/^[^a-zA-Z0-9_]*//;
+	    $deps =~ s/[^a-zA-Z0-9_]*$//;
+
+	    my @deps = split /[^a-zA-Z0-9_]+/, $deps;
+
+	    $ifdeps[$iflevel++] = join ':', @deps;
+
+	} elsif (/^endif/) {
+
+	    $iflevel-- if ($iflevel);
+
+	# stop on "help"
+	} elsif (/^\s*help\s*$/) {
+	    $state = "NONE";
+	}
+    }
+    close(KIN);
+
+    # read in any configs that were found.
+    foreach $kconfig (@kconfigs) {
+	if (!defined($read_kconfigs{$kconfig})) {
+	    $read_kconfigs{$kconfig} = 1;
+	    read_kconfig("$builddir/$kconfig");
+	}
+    }
+}
+
+sub read_depends {
+    # find out which arch this is by the kconfig file
+    open (IN, $output_config)
+	or dodie "Failed to read $output_config";
+    my $arch;
+    while (<IN>) {
+	if (m,Linux/(\S+)\s+\S+\s+Kernel Configuration,) {
+	    $arch = $1;
+	    last;
+	}
+    }
+    close IN;
+
+    if (!defined($arch)) {
+	doprint "Could not find arch from config file\n";
+	doprint "no dependencies used\n";
+	return;
+    }
+
+    # arch is really the subarch, we need to know
+    # what directory to look at.
+    if ($arch eq "i386" || $arch eq "x86_64") {
+	$arch = "x86";
+    } elsif ($arch =~ /^tile/) {
+	$arch = "tile";
+    }
+
+    my $kconfig = "$builddir/arch/$arch/Kconfig";
+
+    if (! -f $kconfig && $arch =~ /\d$/) {
+	my $orig = $arch;
+ 	# some subarchs have numbers, truncate them
+	$arch =~ s/\d*$//;
+	$kconfig = "$builddir/arch/$arch/Kconfig";
+	if (! -f $kconfig) {
+	    doprint "No idea what arch dir $orig is for\n";
+	    doprint "no dependencies used\n";
+	    return;
+	}
+    }
+
+    read_kconfig($kconfig);
+}
+
+sub read_config_list {
+    my ($config) = @_;
+
+    open (IN, $config)
+	or dodie "Failed to read $config";
+
+    while (<IN>) {
+	if (/^((CONFIG\S*)=.*)/) {
+	    if (!defined($config_ignore{$2})) {
+		$config_list{$2} = $1;
+	    }
+	}
+    }
+
+    close(IN);
+}
+
+sub read_output_config {
+    my ($config) = @_;
+
+    assign_configs \%config_ignore, $config;
+}
+
+sub make_new_config {
+    my @configs = @_;
+
+    open (OUT, ">$output_config")
+	or dodie "Failed to write $output_config";
+
+    foreach my $config (@configs) {
+	print OUT "$config\n";
+    }
+    close OUT;
+}
+
+sub get_depends {
+    my ($dep) = @_;
+
+    my $kconfig = $dep;
+    $kconfig =~ s/CONFIG_//;
+
+    $dep = $depends{"$kconfig"};
+
+    # the dep string we have saves the dependencies as they
+    # were found, including expressions like ! && ||. We
+    # want to split this out into just an array of configs.
+
+    my $valid = "A-Za-z_0-9";
+
+    my @configs;
+
+    while ($dep =~ /[$valid]/) {
+
+	if ($dep =~ /^[^$valid]*([$valid]+)/) {
+	    my $conf = "CONFIG_" . $1;
+
+	    $configs[$#configs + 1] = $conf;
+
+	    $dep =~ s/^[^$valid]*[$valid]+//;
+	} else {
+	    die "this should never happen";
+	}
+    }
+
+    return @configs;
+}
+
+my %min_configs;
+my %keep_configs;
+my %save_configs;
+my %processed_configs;
+my %nochange_config;
+
+sub test_this_config {
+    my ($config) = @_;
+
+    my $found;
+
+    # if we already processed this config, skip it
+    if (defined($processed_configs{$config})) {
+	return undef;
+    }
+    $processed_configs{$config} = 1;
+
+    # if this config failed during this round, skip it
+    if (defined($nochange_config{$config})) {
+	return undef;
+    }
+
+    my $kconfig = $config;
+    $kconfig =~ s/CONFIG_//;
+
+    # Test dependencies first
+    if (defined($depends{"$kconfig"})) {
+	my @parents = get_depends $config;
+	foreach my $parent (@parents) {
+	    # if the parent is in the min config, check it first
+	    next if (!defined($min_configs{$parent}));
+	    $found = test_this_config($parent);
+	    if (defined($found)) {
+		return $found;
+	    }
+	}
+    }
+
+    # Remove this config from the list of configs
+    # do a make oldnoconfig and then read the resulting
+    # .config to make sure it is missing the config that
+    # we had before
+    my %configs = %min_configs;
+    delete $configs{$config};
+    make_new_config ((values %configs), (values %keep_configs));
+    make_oldconfig;
+    undef %configs;
+    assign_configs \%configs, $output_config;
+
+    return $config if (!defined($configs{$config}));
+
+    doprint "disabling config $config did not change .config\n";
+
+    $nochange_config{$config} = 1;
+
+    return undef;
+}
+
+sub make_min_config {
+    my ($i) = @_;
+
+    if (!defined($output_minconfig)) {
+	fail "OUTPUT_MIN_CONFIG not defined" and return;
+    }
+
+    # If output_minconfig exists, and the start_minconfig
+    # came from min_config, than ask if we should use
+    # that instead.
+    if (-f $output_minconfig && !$start_minconfig_defined) {
+	print "$output_minconfig exists\n";
+	if (read_yn " Use it as minconfig?") {
+	    $start_minconfig = $output_minconfig;
+	}
+    }
+
+    if (!defined($start_minconfig)) {
+	fail "START_MIN_CONFIG or MIN_CONFIG not defined" and return;
+    }
+
+    my $temp_config = "$tmpdir/temp_config";
+
+    # First things first. We build an allnoconfig to find
+    # out what the defaults are that we can't touch.
+    # Some are selections, but we really can't handle selections.
+
+    my $save_minconfig = $minconfig;
+    undef $minconfig;
+
+    run_command "$make allnoconfig" or return 0;
+
+    read_depends;
+
+    process_config_ignore $output_config;
+
+    undef %save_configs;
+    undef %min_configs;
+
+    if (defined($ignore_config)) {
+	# make sure the file exists
+	`touch $ignore_config`;
+	assign_configs \%save_configs, $ignore_config;
+    }
+
+    %keep_configs = %save_configs;
+
+    doprint "Load initial configs from $start_minconfig\n";
+
+    # Look at the current min configs, and save off all the
+    # ones that were set via the allnoconfig
+    assign_configs \%min_configs, $start_minconfig;
+
+    my @config_keys = keys %min_configs;
+
+    # Remove anything that was set by the make allnoconfig
+    # we shouldn't need them as they get set for us anyway.
+    foreach my $config (@config_keys) {
+	# Remove anything in the ignore_config
+	if (defined($keep_configs{$config})) {
+	    my $file = $ignore_config;
+	    $file =~ s,.*/(.*?)$,$1,;
+	    doprint "$config set by $file ... ignored\n";
+	    delete $min_configs{$config};
+	    next;
+	}
+	# But make sure the settings are the same. If a min config
+	# sets a selection, we do not want to get rid of it if
+	# it is not the same as what we have. Just move it into
+	# the keep configs.
+	if (defined($config_ignore{$config})) {
+	    if ($config_ignore{$config} ne $min_configs{$config}) {
+		doprint "$config is in allnoconfig as '$config_ignore{$config}'";
+		doprint " but it is '$min_configs{$config}' in minconfig .. keeping\n";
+		$keep_configs{$config} = $min_configs{$config};
+	    } else {
+		doprint "$config set by allnoconfig ... ignored\n";
+	    }
+	    delete $min_configs{$config};
+	}
+    }
+
+    my $done = 0;
+    my $take_two = 0;
+
+    while (!$done) {
+
+	my $config;
+	my $found;
+
+	# Now disable each config one by one and do a make oldconfig
+	# till we find a config that changes our list.
+
+	# Put configs that did not modify the config at the end.
+	my @test_configs = keys %min_configs;
+	my $reset = 1;
+	for (my $i = 0; $i < $#test_configs; $i++) {
+	    if (!defined($nochange_config{$test_configs[0]})) {
+		$reset = 0;
+		last;
+	    }
+	    # This config didn't change the .config last time.
+	    # Place it at the end
+	    my $config = shift @test_configs;
+	    push @test_configs, $config;
+	}
+
+	# if every test config has failed to modify the .config file
+	# in the past, then reset and start over.
+	if ($reset) {
+	    undef %nochange_config;
+	}
+
+	undef %processed_configs;
+
+	foreach my $config (@test_configs) {
+
+	    $found = test_this_config $config;
+
+	    last if (defined($found));
+
+	    # oh well, try another config
+	}
+
+	if (!defined($found)) {
+	    # we could have failed due to the nochange_config hash
+	    # reset and try again
+	    if (!$take_two) {
+		undef %nochange_config;
+		$take_two = 1;
+		next;
+	    }
+	    doprint "No more configs found that we can disable\n";
+	    $done = 1;
+	    last;
+	}
+	$take_two = 0;
+
+	$config = $found;
+
+	doprint "Test with $config disabled\n";
+
+	# set in_bisect to keep build and monitor from dieing
+	$in_bisect = 1;
+
+	my $failed = 0;
+	build "oldconfig";
+	start_monitor_and_boot or $failed = 1;
+	end_monitor;
+
+	$in_bisect = 0;
+
+	if ($failed) {
+	    doprint "$min_configs{$config} is needed to boot the box... keeping\n";
+	    # this config is needed, add it to the ignore list.
+	    $keep_configs{$config} = $min_configs{$config};
+	    $save_configs{$config} = $min_configs{$config};
+	    delete $min_configs{$config};
+
+	    # update new ignore configs
+	    if (defined($ignore_config)) {
+		open (OUT, ">$temp_config")
+		    or die "Can't write to $temp_config";
+		foreach my $config (keys %save_configs) {
+		    print OUT "$save_configs{$config}\n";
+		}
+		close OUT;
+		run_command "mv $temp_config $ignore_config" or
+		    dodie "failed to copy update to $ignore_config";
+	    }
+
+	} else {
+	    # We booted without this config, remove it from the minconfigs.
+	    doprint "$config is not needed, disabling\n";
+
+	    delete $min_configs{$config};
+
+	    # Also disable anything that is not enabled in this config
+	    my %configs;
+	    assign_configs \%configs, $output_config;
+	    my @config_keys = keys %min_configs;
+	    foreach my $config (@config_keys) {
+		if (!defined($configs{$config})) {
+		    doprint "$config is not set, disabling\n";
+		    delete $min_configs{$config};
+		}
+	    }
+
+	    # Save off all the current mandidory configs
+	    open (OUT, ">$temp_config")
+		or die "Can't write to $temp_config";
+	    foreach my $config (keys %keep_configs) {
+		print OUT "$keep_configs{$config}\n";
+	    }
+	    foreach my $config (keys %min_configs) {
+		print OUT "$min_configs{$config}\n";
+	    }
+	    close OUT;
+
+	    run_command "mv $temp_config $output_minconfig" or
+		dodie "failed to copy update to $output_minconfig";
+	}
+
+	doprint "Reboot and wait $sleep_time seconds\n";
+	reboot;
+	start_monitor;
+	wait_for_monitor $sleep_time;
+	end_monitor;
+    }
+
+    success $i;
+    return 1;
+}
+
 $#ARGV < 1 or die "ktest.pl version: $VERSION\n   usage: ktest.pl config-file\n";
 
 if ($#ARGV == 0) {
     $ktest_config = $ARGV[0];
     if (! -f $ktest_config) {
 	print "$ktest_config does not exist.\n";
-	my $ans;
-        for (;;) {
-	    print "Create it? [Y/n] ";
-	    $ans = <STDIN>;
-	    chomp $ans;
-	    if ($ans =~ /^\s*$/) {
-		$ans = "y";
-	    }
-	    last if ($ans =~ /^y$/i || $ans =~ /^n$/i);
-	    print "Please answer either 'y' or 'n'.\n";
-	}
-	if ($ans !~ /^y$/i) {
+	if (!read_yn "Create it?") {
 	    exit 0;
 	}
     }
@@ -1977,6 +2699,10 @@ EOF
 }
 read_config $ktest_config;
 
+if (defined($opt{"LOG_FILE"})) {
+    $opt{"LOG_FILE"} = eval_option($opt{"LOG_FILE"}, -1);
+}
+
 # Append any configs entered in manually to the config file.
 my @new_configs = keys %entered_configs;
 if ($#new_configs >= 0) {
@@ -2045,70 +2771,13 @@ sub __set_test_option {
     return undef;
 }
 
-sub eval_option {
-    my ($option, $i) = @_;
-
-    # Add space to evaluate the character before $
-    $option = " $option";
-    my $retval = "";
-
-    while ($option =~ /(.*?[^\\])\$\{(.*?)\}(.*)/) {
-	my $start = $1;
-	my $var = $2;
-	my $end = $3;
-
-	# Append beginning of line
-	$retval = "$retval$start";
-
-	# If the iteration option OPT[$i] exists, then use that.
-	# otherwise see if the default OPT (without [$i]) exists.
-
-	my $o = "$var\[$i\]";
-
-	if (defined($opt{$o})) {
-	    $o = $opt{$o};
-	    $retval = "$retval$o";
-	} elsif (defined($opt{$var})) {
-	    $o = $opt{$var};
-	    $retval = "$retval$o";
-	} else {
-	    $retval = "$retval\$\{$var\}";
-	}
-
-	$option = $end;
-    }
-
-    $retval = "$retval$option";
-
-    $retval =~ s/^ //;
-
-    return $retval;
-}
-
 sub set_test_option {
     my ($name, $i) = @_;
 
     my $option = __set_test_option($name, $i);
     return $option if (!defined($option));
 
-    my $prev = "";
-
-    # Since an option can evaluate to another option,
-    # keep iterating until we do not evaluate any more
-    # options.
-    my $r = 0;
-    while ($prev ne $option) {
-	# Check for recursive evaluations.
-	# 100 deep should be more than enough.
-	if ($r++ > 100) {
-	    die "Over 100 evaluations accurred with $name\n" .
-		"Check for recursive variables\n";
-	}
-	$prev = $option;
-	$option = eval_option($option, $i);
-    }
-
-    return $option;
+    return eval_option($option, $i);
 }
 
 # First we need to do is the builds
@@ -2126,10 +2795,17 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
     $test_type = set_test_option("TEST_TYPE", $i);
     $build_type = set_test_option("BUILD_TYPE", $i);
     $build_options = set_test_option("BUILD_OPTIONS", $i);
+    $pre_build = set_test_option("PRE_BUILD", $i);
+    $post_build = set_test_option("POST_BUILD", $i);
+    $pre_build_die = set_test_option("PRE_BUILD_DIE", $i);
+    $post_build_die = set_test_option("POST_BUILD_DIE", $i);
     $power_cycle = set_test_option("POWER_CYCLE", $i);
     $reboot = set_test_option("REBOOT", $i);
     $noclean = set_test_option("BUILD_NOCLEAN", $i);
     $minconfig = set_test_option("MIN_CONFIG", $i);
+    $output_minconfig = set_test_option("OUTPUT_MIN_CONFIG", $i);
+    $start_minconfig = set_test_option("START_MIN_CONFIG", $i);
+    $ignore_config = set_test_option("IGNORE_CONFIG", $i);
     $run_test = set_test_option("TEST", $i);
     $addconfig = set_test_option("ADD_CONFIG", $i);
     $reboot_type = set_test_option("REBOOT_TYPE", $i);
@@ -2145,12 +2821,16 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
     $sleep_time = set_test_option("SLEEP_TIME", $i);
     $bisect_sleep_time = set_test_option("BISECT_SLEEP_TIME", $i);
     $patchcheck_sleep_time = set_test_option("PATCHCHECK_SLEEP_TIME", $i);
+    $ignore_warnings = set_test_option("IGNORE_WARNINGS", $i);
     $bisect_manual = set_test_option("BISECT_MANUAL", $i);
     $bisect_skip = set_test_option("BISECT_SKIP", $i);
+    $config_bisect_good = set_test_option("CONFIG_BISECT_GOOD", $i);
     $store_failures = set_test_option("STORE_FAILURES", $i);
+    $test_name = set_test_option("TEST_NAME", $i);
     $timeout = set_test_option("TIMEOUT", $i);
     $booted_timeout = set_test_option("BOOTED_TIMEOUT", $i);
     $console = set_test_option("CONSOLE", $i);
+    $detect_triplefault = set_test_option("DETECT_TRIPLE_FAULT", $i);
     $success_line = set_test_option("SUCCESS_LINE", $i);
     $stop_after_success = set_test_option("STOP_AFTER_SUCCESS", $i);
     $stop_after_failure = set_test_option("STOP_AFTER_FAILURE", $i);
@@ -2161,6 +2841,13 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
     $target_image = set_test_option("TARGET_IMAGE", $i);
     $localversion = set_test_option("LOCALVERSION", $i);
 
+    $start_minconfig_defined = 1;
+
+    if (!defined($start_minconfig)) {
+	$start_minconfig_defined = 0;
+	$start_minconfig = $minconfig;
+    }
+
     chdir $builddir || die "can't change directory to $builddir";
 
     if (!-d $tmpdir) {
@@ -2193,6 +2880,10 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
 	$run_type = $opt{"CONFIG_BISECT_TYPE[$i]"};
     }
 
+    if ($test_type eq "make_min_config") {
+	$run_type = "";
+    }
+
     # mistake in config file?
     if (!defined($run_type)) {
 	$run_type = "ERROR";
@@ -2204,11 +2895,12 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
     unlink $dmesg;
     unlink $buildlog;
 
-    if (!defined($minconfig)) {
-	$minconfig = $addconfig;
-
-    } elsif (defined($addconfig)) {
-	run_command "cat $addconfig $minconfig > $tmpdir/add_config" or
+    if (defined($addconfig)) {
+	my $min = $minconfig;
+	if (!defined($minconfig)) {
+	    $min = "";
+	}
+	run_command "cat $addconfig $min > $tmpdir/add_config" or
 	    dodie "Failed to create temp config";
 	$minconfig = "$tmpdir/add_config";
     }
@@ -2228,6 +2920,9 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
     } elsif ($test_type eq "patchcheck") {
 	patchcheck $i;
 	next;
+    } elsif ($test_type eq "make_min_config") {
+	make_min_config $i;
+	next;
     }
 
     if ($build_type ne "nobuild") {
@@ -2235,13 +2930,8 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) {
     }
 
     if ($test_type ne "build") {
-	get_grub_index;
-	get_version;
-	install;
-
 	my $failed = 0;
-	start_monitor;
-	monitor or $failed = 1;;
+	start_monitor_and_boot or $failed = 1;
 
 	if (!$failed && $test_type ne "boot" && defined($run_test)) {
 	    do_run_test or $failed = 1;
diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf
index 48cbcc80602a..b8bcd14b5a4d 100644
--- a/tools/testing/ktest/sample.conf
+++ b/tools/testing/ktest/sample.conf
@@ -293,6 +293,38 @@
 # or on some systems:
 #POST_INSTALL = ssh user@target /sbin/dracut -f /boot/initramfs-test.img $KERNEL_VERSION
 
+# If there is a script that you require to run before the build is done
+# you can specify it with PRE_BUILD.
+#
+# One example may be if you must add a temporary patch to the build to
+# fix a unrelated bug to perform a patchcheck test. This will apply the
+# patch before each build that is made. Use the POST_BUILD to do a git reset --hard
+# to remove the patch.
+#
+# (default undef)
+#PRE_BUILD = cd ${BUILD_DIR} && patch -p1 < /tmp/temp.patch
+
+# To specify if the test should fail if the PRE_BUILD fails,
+# PRE_BUILD_DIE needs to be set to 1. Otherwise the PRE_BUILD
+# result is ignored.
+# (default 0)
+# PRE_BUILD_DIE = 1
+
+# If there is a script that should run after the build is done
+# you can specify it with POST_BUILD.
+#
+# As the example in PRE_BUILD, POST_BUILD can be used to reset modifications
+# made by the PRE_BUILD.
+#
+# (default undef)
+#POST_BUILD = cd ${BUILD_DIR} && git reset --hard
+
+# To specify if the test should fail if the POST_BUILD fails,
+# POST_BUILD_DIE needs to be set to 1. Otherwise the POST_BUILD
+# result is ignored.
+# (default 0)
+#POST_BUILD_DIE = 1
+
 # Way to reboot the box to the test kernel.
 # Only valid options so far are "grub" and "script"
 # (default grub)
@@ -360,8 +392,8 @@
 #ADD_CONFIG = /home/test/config-broken
 
 # The location on the host where to write temp files
-# (default /tmp/ktest)
-#TMP_DIR = /tmp/ktest
+# (default /tmp/ktest/${MACHINE})
+#TMP_DIR = /tmp/ktest/${MACHINE}
 
 # Optional log file to write the status (recommended)
 #  Note, this is a DEFAULT section only option.
@@ -518,6 +550,16 @@
 # The variables SSH_USER and MACHINE are defined.
 #REBOOT = ssh $SSH_USER@$MACHINE reboot
 
+# The way triple faults are detected is by testing the kernel
+# banner. If the kernel banner for the kernel we are testing is
+# found, and then later a kernel banner for another kernel version
+# is found, it is considered that we encountered a triple fault,
+# and there is no panic or callback, but simply a reboot.
+# To disable this (because it did a false positive) set the following
+# to 0.
+# (default 1)
+#DETECT_TRIPLE_FAULT = 0
+
 #### Per test run options ####
 # The following options are only allowed in TEST_START sections.
 # They are ignored in the DEFAULTS sections.
@@ -535,6 +577,12 @@
 #  all preceding tests until a new CHECKOUT is set.
 #
 #
+# TEST_NAME = name
+#
+#  If you want the test to have a name that is displayed in
+#  the test result banner at the end of the test, then use this
+#  option. This is useful to search for the RESULT keyword and
+#  not have to translate a test number to a test in the config.
 #
 # For TEST_TYPE = patchcheck
 #
@@ -556,7 +604,12 @@
 #      build, boot, test.
 #
 #   Note, the build test will look for warnings, if a warning occurred
-#     in a file that a commit touches, the build will fail.
+#     in a file that a commit touches, the build will fail, unless
+#     IGNORE_WARNINGS is set for the given commit's sha1
+#
+#   IGNORE_WARNINGS can be used to disable the failure of patchcheck
+#     on a particuler commit (SHA1). You can add more than one commit
+#     by adding a list of SHA1s that are space delimited.
 #
 #   If BUILD_NOCLEAN is set, then make mrproper will not be run on
 #   any of the builds, just like all other TEST_TYPE tests. But
@@ -571,6 +624,7 @@
 #   PATCHCHECK_TYPE = boot
 #   PATCHCHECK_START = 747e94ae3d1b4c9bf5380e569f614eb9040b79e7
 #   PATCHCHECK_END = HEAD~2
+#   IGNORE_WARNINGS = 42f9c6b69b54946ffc0515f57d01dc7f5c0e4712 0c17ca2c7187f431d8ffc79e81addc730f33d128
 #
 #
 #
@@ -739,13 +793,18 @@
 #	boot	- bad builds but fails to boot
 #	test	- bad boots but fails a test
 #
-#   CONFIG_BISECT is the config that failed to boot
+#  CONFIG_BISECT is the config that failed to boot
 #
-#   If BISECT_MANUAL is set, it will pause between iterations.
-#   This is useful to use just ktest.pl just for the config bisect.
-#   If you set it to build, it will run the bisect and you can
-#   control what happens in between iterations. It will ask you if
-#   the test succeeded or not and continue the config bisect.
+#  If BISECT_MANUAL is set, it will pause between iterations.
+#  This is useful to use just ktest.pl just for the config bisect.
+#  If you set it to build, it will run the bisect and you can
+#  control what happens in between iterations. It will ask you if
+#  the test succeeded or not and continue the config bisect.
+#
+# CONFIG_BISECT_GOOD (optional)
+#  If you have a good config to start with, then you
+#  can specify it with CONFIG_BISECT_GOOD. Otherwise
+#  the MIN_CONFIG is the base.
 #
 # Example:
 #   TEST_START
@@ -755,3 +814,68 @@
 #   MIN_CONFIG = /home/test/config-min
 #   BISECT_MANUAL = 1
 #
+#
+#
+# For TEST_TYPE = make_min_config
+#
+#  After doing a make localyesconfig, your kernel configuration may
+#  not be the most useful minimum configuration. Having a true minimum
+#  config that you can use against other configs is very useful if
+#  someone else has a config that breaks on your code. By only forcing
+#  those configurations that are truly required to boot your machine
+#  will give you less of a chance that one of your set configurations
+#  will make the bug go away. This will give you a better chance to
+#  be able to reproduce the reported bug matching the broken config.
+#
+#  Note, this does take some time, and may require you to run the
+#  test over night, or perhaps over the weekend. But it also allows
+#  you to interrupt it, and gives you the current minimum config
+#  that was found till that time.
+#
+#  Note, this test automatically assumes a BUILD_TYPE of oldconfig
+#  and its test type acts like boot.
+#  TODO: add a test version that makes the config do more than just
+#   boot, like having network access.
+#
+#  To save time, the test does not just grab any option and test
+#  it. The Kconfig files are examined to determine the dependencies
+#  of the configs. If a config is chosen that depends on another
+#  config, that config will be checked first. By checking the
+#  parents first, we can eliminate whole groups of configs that
+#  may have been enabled.
+#
+#  For example, if a USB device config is chosen and depends on CONFIG_USB,
+#  the CONFIG_USB will be tested before the device. If CONFIG_USB is
+#  found not to be needed, it, as well as all configs that depend on
+#  it, will be disabled and removed from the current min_config.
+#
+#  OUTPUT_MIN_CONFIG is the path and filename of the file that will
+#   be created from the MIN_CONFIG. If you interrupt the test, set
+#   this file as your new min config, and use it to continue the test.
+#   This file does not need to exist on start of test.
+#   This file is not created until a config is found that can be removed.
+#   If this file exists, you will be prompted if you want to use it
+#   as the min_config (overriding MIN_CONFIG) if START_MIN_CONFIG
+#   is not defined.
+#   (required field)
+#
+#  START_MIN_CONFIG is the config to use to start the test with.
+#   you can set this as the same OUTPUT_MIN_CONFIG, but if you do
+#   the OUTPUT_MIN_CONFIG file must exist.
+#   (default MIN_CONFIG)
+#
+#  IGNORE_CONFIG is used to specify a config file that has configs that
+#   you already know must be set. Configs are written here that have
+#   been tested and proved to be required. It is best to define this
+#   file if you intend on interrupting the test and running it where
+#   it left off. New configs that it finds will be written to this file
+#   and will not be tested again in later runs.
+#   (optional)
+#
+# Example:
+#
+#  TEST_TYPE = make_min_config
+#  OUTPUT_MIN_CONFIG = /path/to/config-new-min
+#  START_MIN_CONFIG = /path/to/config-min
+#  IGNORE_CONFIG = /path/to/config-tested
+#