summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/early-userspace/README2
-rw-r--r--MAINTAINERS1
-rw-r--r--arch/arm/configs/enp2611_defconfig95
-rw-r--r--arch/arm/configs/ixdp2400_defconfig95
-rw-r--r--arch/arm/configs/ixdp2401_defconfig95
-rw-r--r--arch/arm/configs/ixdp2800_defconfig95
-rw-r--r--arch/arm/configs/ixdp2801_defconfig95
-rw-r--r--arch/arm/lib/csumpartial.S28
-rw-r--r--arch/arm/lib/csumpartialcopygeneric.S70
-rw-r--r--arch/arm/lib/delay.S4
-rw-r--r--arch/arm/lib/findbit.S18
-rw-r--r--arch/arm/lib/io-acorn.S4
-rw-r--r--arch/arm/lib/io-readsb.S24
-rw-r--r--arch/arm/lib/io-readsw-armv3.S30
-rw-r--r--arch/arm/lib/io-readsw-armv4.S24
-rw-r--r--arch/arm/lib/io-writesb.S25
-rw-r--r--arch/arm/lib/io-writesw-armv3.S30
-rw-r--r--arch/arm/lib/io-writesw-armv4.S25
-rw-r--r--arch/arm/lib/uaccess.S230
-rw-r--r--arch/arm/tools/mach-types43
-rw-r--r--arch/ia64/Kconfig13
-rw-r--r--arch/ia64/configs/sn2_defconfig2
-rw-r--r--arch/ia64/defconfig2
-rw-r--r--arch/ia64/kernel/ivt.S63
-rw-r--r--arch/ia64/sn/kernel/setup.c157
-rw-r--r--drivers/block/floppy.c8
-rw-r--r--drivers/char/ftape/lowlevel/ftape-buffer.c1
-rw-r--r--fs/afs/callback.c1
-rw-r--r--fs/befs/attribute.c117
-rw-r--r--fs/freevxfs/vxfs_bmap.c1
-rw-r--r--fs/freevxfs/vxfs_olt.c1
-rw-r--r--fs/ioprio.c1
-rw-r--r--fs/jffs/jffs_fm.c1
-rw-r--r--fs/partitions/ultrix.c1
-rw-r--r--fs/reiserfs/hashes.c1
-rw-r--r--include/asm-ia64/page.h8
-rw-r--r--include/asm-ia64/pgalloc.h19
-rw-r--r--include/asm-ia64/pgtable.h76
-rw-r--r--include/linux/idr.h6
-rw-r--r--mm/slab.c2
40 files changed, 981 insertions, 533 deletions
diff --git a/Documentation/early-userspace/README b/Documentation/early-userspace/README
index 270a88e22fb9..cddbac456c29 100644
--- a/Documentation/early-userspace/README
+++ b/Documentation/early-userspace/README
@@ -28,7 +28,7 @@ the image from specifications.
CPIO ARCHIVE method
You can create a cpio archive that contains the early userspace image.
-Youre cpio archive should be specified in CONFIG_INITRAMFS_SOURCE and it
+Your cpio archive should be specified in CONFIG_INITRAMFS_SOURCE and it
will be used directly. Only a single cpio file may be specified in
CONFIG_INITRAMFS_SOURCE and directory and file names are not allowed in
combination with a cpio archive.
diff --git a/MAINTAINERS b/MAINTAINERS
index 0b03a88e88be..2313de23b0da 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1988,7 +1988,6 @@ PKTCDVD DRIVER
P: Peter Osterlund
M: petero2@telia.com
L: linux-kernel@vger.kernel.org
-L: packet-writing@suse.com
S: Maintained
POSIX CLOCKS and TIMERS
diff --git a/arch/arm/configs/enp2611_defconfig b/arch/arm/configs/enp2611_defconfig
index 30e6444f9aaa..fd7c0042bcca 100644
--- a/arch/arm/configs/enp2611_defconfig
+++ b/arch/arm/configs/enp2611_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13
-# Wed Sep 14 10:51:52 2005
+# Linux kernel version: 2.6.14-git13
+# Thu Nov 10 15:12:48 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
@@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
@@ -61,6 +63,23 @@ CONFIG_OBSOLETE_MODPARM=y
CONFIG_KMOD=y
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# System Type
#
# CONFIG_ARCH_CLPS7500 is not set
@@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
@@ -124,7 +144,6 @@ CONFIG_XSCALE_PMU=y
CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
@@ -144,6 +163,8 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
@@ -162,6 +183,7 @@ CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmw
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
# CONFIG_FPE_FASTFPE is not set
#
@@ -205,14 +227,19 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
@@ -228,6 +255,10 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
@@ -238,6 +269,7 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
#
# Device Drivers
@@ -273,6 +305,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
@@ -307,7 +340,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_EDB7312 is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PLATRAM is not set
@@ -334,6 +366,11 @@ CONFIG_MTD_IXP2000=y
# CONFIG_MTD_NAND is not set
#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
# Parallel port support
#
# CONFIG_PARPORT is not set
@@ -358,21 +395,13 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
@@ -410,12 +439,18 @@ CONFIG_DUMMY=y
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
@@ -455,6 +490,7 @@ CONFIG_EEPRO100=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
@@ -464,6 +500,7 @@ CONFIG_EEPRO100=y
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -609,6 +646,7 @@ CONFIG_IXP2000_WATCHDOG=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -634,7 +672,6 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
CONFIG_I2C_IXP2000=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
@@ -649,7 +686,6 @@ CONFIG_I2C_IXP2000=y
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
-CONFIG_I2C_SENSOR=y
#
# Miscellaneous I2C Chip support
@@ -662,6 +698,7 @@ CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -671,6 +708,7 @@ CONFIG_SENSORS_EEPROM=y
# Hardware Monitoring support
#
CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
@@ -701,6 +739,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
@@ -711,6 +750,10 @@ CONFIG_HWMON=y
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -738,6 +781,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -765,10 +812,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -777,6 +820,7 @@ CONFIG_INOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -796,11 +840,10 @@ CONFIG_DNOTIFY=y
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -816,6 +859,7 @@ CONFIG_RAMFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@@ -848,6 +892,7 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -886,6 +931,7 @@ CONFIG_MSDOS_PARTITION=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -894,7 +940,9 @@ CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
@@ -920,6 +968,7 @@ CONFIG_DEBUG_LL=y
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/ixdp2400_defconfig b/arch/arm/configs/ixdp2400_defconfig
index ddeb9f99d662..e6a4d2656fe5 100644
--- a/arch/arm/configs/ixdp2400_defconfig
+++ b/arch/arm/configs/ixdp2400_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13
-# Wed Sep 14 10:52:01 2005
+# Linux kernel version: 2.6.14-git13
+# Thu Nov 10 15:14:13 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
@@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
@@ -61,6 +63,23 @@ CONFIG_OBSOLETE_MODPARM=y
CONFIG_KMOD=y
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# System Type
#
# CONFIG_ARCH_CLPS7500 is not set
@@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
@@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y
CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
@@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
@@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmw
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
# CONFIG_FPE_FASTFPE is not set
#
@@ -206,14 +228,19 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
@@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
@@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
#
# Device Drivers
@@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
@@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_EDB7312 is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PLATRAM is not set
@@ -335,6 +367,11 @@ CONFIG_MTD_IXP2000=y
# CONFIG_MTD_NAND is not set
#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
# Parallel port support
#
# CONFIG_PARPORT is not set
@@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
@@ -411,12 +440,18 @@ CONFIG_DUMMY=y
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
@@ -456,6 +491,7 @@ CONFIG_EEPRO100=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
@@ -465,6 +501,7 @@ CONFIG_EEPRO100=y
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -610,6 +647,7 @@ CONFIG_IXP2000_WATCHDOG=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -635,7 +673,6 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
CONFIG_I2C_IXP2000=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
@@ -650,7 +687,6 @@ CONFIG_I2C_IXP2000=y
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
-CONFIG_I2C_SENSOR=y
#
# Miscellaneous I2C Chip support
@@ -663,6 +699,7 @@ CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -672,6 +709,7 @@ CONFIG_SENSORS_EEPROM=y
# Hardware Monitoring support
#
CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
@@ -702,6 +740,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
@@ -712,6 +751,10 @@ CONFIG_HWMON=y
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -739,6 +782,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -766,10 +813,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -778,6 +821,7 @@ CONFIG_INOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -797,11 +841,10 @@ CONFIG_DNOTIFY=y
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -817,6 +860,7 @@ CONFIG_RAMFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@@ -849,6 +893,7 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -887,6 +932,7 @@ CONFIG_MSDOS_PARTITION=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -895,7 +941,9 @@ CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
@@ -921,6 +969,7 @@ CONFIG_DEBUG_LL=y
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig
index 32bd552e0986..5572cf95d5f8 100644
--- a/arch/arm/configs/ixdp2401_defconfig
+++ b/arch/arm/configs/ixdp2401_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13
-# Wed Sep 14 10:52:10 2005
+# Linux kernel version: 2.6.14-git13
+# Thu Nov 10 15:14:50 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
@@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
@@ -61,6 +63,23 @@ CONFIG_OBSOLETE_MODPARM=y
CONFIG_KMOD=y
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# System Type
#
# CONFIG_ARCH_CLPS7500 is not set
@@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
@@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y
CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
@@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
@@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firm
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
# CONFIG_FPE_FASTFPE is not set
#
@@ -206,14 +228,19 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
@@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
@@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
#
# Device Drivers
@@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
@@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_EDB7312 is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PLATRAM is not set
@@ -335,6 +367,11 @@ CONFIG_MTD_IXP2000=y
# CONFIG_MTD_NAND is not set
#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
# Parallel port support
#
# CONFIG_PARPORT is not set
@@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
@@ -411,12 +440,18 @@ CONFIG_DUMMY=y
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
@@ -457,6 +492,7 @@ CONFIG_EEPRO100=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
@@ -466,6 +502,7 @@ CONFIG_EEPRO100=y
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -611,6 +648,7 @@ CONFIG_IXP2000_WATCHDOG=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -636,7 +674,6 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
CONFIG_I2C_IXP2000=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
@@ -651,7 +688,6 @@ CONFIG_I2C_IXP2000=y
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
-CONFIG_I2C_SENSOR=y
#
# Miscellaneous I2C Chip support
@@ -664,6 +700,7 @@ CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -673,6 +710,7 @@ CONFIG_SENSORS_EEPROM=y
# Hardware Monitoring support
#
CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
@@ -703,6 +741,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
@@ -713,6 +752,10 @@ CONFIG_HWMON=y
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -740,6 +783,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -767,10 +814,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -779,6 +822,7 @@ CONFIG_INOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -798,11 +842,10 @@ CONFIG_DNOTIFY=y
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -818,6 +861,7 @@ CONFIG_RAMFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@@ -850,6 +894,7 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -888,6 +933,7 @@ CONFIG_MSDOS_PARTITION=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -896,7 +942,9 @@ CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
@@ -922,6 +970,7 @@ CONFIG_DEBUG_LL=y
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/ixdp2800_defconfig b/arch/arm/configs/ixdp2800_defconfig
index 81d3a0606f95..0fddbde85835 100644
--- a/arch/arm/configs/ixdp2800_defconfig
+++ b/arch/arm/configs/ixdp2800_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13
-# Wed Sep 14 10:52:23 2005
+# Linux kernel version: 2.6.14-git13
+# Thu Nov 10 15:14:56 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
@@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
@@ -61,6 +63,23 @@ CONFIG_OBSOLETE_MODPARM=y
CONFIG_KMOD=y
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# System Type
#
# CONFIG_ARCH_CLPS7500 is not set
@@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
@@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y
CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
@@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
@@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,9600 root=/dev/nfs ip=bootp mem=64M@0x0"
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
# CONFIG_FPE_FASTFPE is not set
#
@@ -206,14 +228,19 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
@@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
@@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
#
# Device Drivers
@@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
@@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_EDB7312 is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PLATRAM is not set
@@ -335,6 +367,11 @@ CONFIG_MTD_IXP2000=y
# CONFIG_MTD_NAND is not set
#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
# Parallel port support
#
# CONFIG_PARPORT is not set
@@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
@@ -411,12 +440,18 @@ CONFIG_DUMMY=y
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
@@ -456,6 +491,7 @@ CONFIG_EEPRO100=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
@@ -465,6 +501,7 @@ CONFIG_EEPRO100=y
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -610,6 +647,7 @@ CONFIG_IXP2000_WATCHDOG=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -635,7 +673,6 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
CONFIG_I2C_IXP2000=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
@@ -650,7 +687,6 @@ CONFIG_I2C_IXP2000=y
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
-CONFIG_I2C_SENSOR=y
#
# Miscellaneous I2C Chip support
@@ -663,6 +699,7 @@ CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -672,6 +709,7 @@ CONFIG_SENSORS_EEPROM=y
# Hardware Monitoring support
#
CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
@@ -702,6 +740,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
@@ -712,6 +751,10 @@ CONFIG_HWMON=y
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -739,6 +782,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -766,10 +813,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -778,6 +821,7 @@ CONFIG_INOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -797,11 +841,10 @@ CONFIG_DNOTIFY=y
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -817,6 +860,7 @@ CONFIG_RAMFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@@ -849,6 +893,7 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -887,6 +932,7 @@ CONFIG_MSDOS_PARTITION=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -895,7 +941,9 @@ CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
@@ -921,6 +969,7 @@ CONFIG_DEBUG_LL=y
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig
index 66ac0885df3e..89b9aa06aa91 100644
--- a/arch/arm/configs/ixdp2801_defconfig
+++ b/arch/arm/configs/ixdp2801_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13
-# Wed Sep 14 10:52:16 2005
+# Linux kernel version: 2.6.14-git13
+# Thu Nov 10 15:15:03 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@@ -21,6 +21,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
@@ -31,6 +32,7 @@ CONFIG_SYSCTL=y
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
@@ -61,6 +63,23 @@ CONFIG_OBSOLETE_MODPARM=y
CONFIG_KMOD=y
#
+# Block layer
+#
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# System Type
#
# CONFIG_ARCH_CLPS7500 is not set
@@ -82,6 +101,7 @@ CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
@@ -125,7 +145,6 @@ CONFIG_XSCALE_PMU=y
CONFIG_ISA_DMA_API=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
@@ -145,6 +164,8 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ALIGNMENT_TRAP=y
#
@@ -163,6 +184,7 @@ CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firm
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
# CONFIG_FPE_FASTFPE is not set
#
@@ -206,14 +228,19 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
@@ -229,6 +256,10 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
@@ -239,6 +270,7 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
#
# Device Drivers
@@ -274,6 +306,7 @@ CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
#
# RAM/ROM/Flash chip drivers
@@ -308,7 +341,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
CONFIG_MTD_IXP2000=y
-# CONFIG_MTD_EDB7312 is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PLATRAM is not set
@@ -335,6 +367,11 @@ CONFIG_MTD_IXP2000=y
# CONFIG_MTD_NAND is not set
#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
# Parallel port support
#
# CONFIG_PARPORT is not set
@@ -359,21 +396,13 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
@@ -411,12 +440,18 @@ CONFIG_DUMMY=y
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
@@ -457,6 +492,7 @@ CONFIG_EEPRO100=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
@@ -466,6 +502,7 @@ CONFIG_EEPRO100=y
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -611,6 +648,7 @@ CONFIG_IXP2000_WATCHDOG=y
# TPM devices
#
# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
#
# I2C support
@@ -636,7 +674,6 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_ISA is not set
CONFIG_I2C_IXP2000=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
@@ -651,7 +688,6 @@ CONFIG_I2C_IXP2000=y
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
-CONFIG_I2C_SENSOR=y
#
# Miscellaneous I2C Chip support
@@ -664,6 +700,7 @@ CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_RTC_X1205_I2C is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -673,6 +710,7 @@ CONFIG_SENSORS_EEPROM=y
# Hardware Monitoring support
#
CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
@@ -703,6 +741,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
@@ -713,6 +752,10 @@ CONFIG_HWMON=y
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -740,6 +783,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -767,10 +814,6 @@ CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
@@ -779,6 +822,7 @@ CONFIG_INOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -798,11 +842,10 @@ CONFIG_DNOTIFY=y
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -818,6 +861,7 @@ CONFIG_RAMFS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@@ -850,6 +894,7 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -888,6 +933,7 @@ CONFIG_MSDOS_PARTITION=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -896,7 +942,9 @@ CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_ERRORS=y
@@ -922,6 +970,7 @@ CONFIG_DEBUG_LL=y
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
diff --git a/arch/arm/lib/csumpartial.S b/arch/arm/lib/csumpartial.S
index fe797cf320bb..a78dae5a7b28 100644
--- a/arch/arm/lib/csumpartial.S
+++ b/arch/arm/lib/csumpartial.S
@@ -26,7 +26,7 @@ td1 .req r4 @ save before use
td2 .req r5 @ save before use
td3 .req lr
-.zero: mov r0, sum
+.Lzero: mov r0, sum
add sp, sp, #4
ldr pc, [sp], #4
@@ -34,8 +34,8 @@ td3 .req lr
* Handle 0 to 7 bytes, with any alignment of source and
* destination pointers. Note that when we get here, C = 0
*/
-.less8: teq len, #0 @ check for zero count
- beq .zero
+.Lless8: teq len, #0 @ check for zero count
+ beq .Lzero
/* we must have at least one byte. */
tst buf, #1 @ odd address?
@@ -44,12 +44,12 @@ td3 .req lr
subne len, len, #1
adcnes sum, sum, td0, put_byte_1
-.less4: tst len, #6
- beq .less8_byte
+.Lless4: tst len, #6
+ beq .Lless8_byte
/* we are now half-word aligned */
-.less8_wordlp:
+.Lless8_wordlp:
#if __LINUX_ARM_ARCH__ >= 4
ldrh td0, [buf], #2
sub len, len, #2
@@ -65,19 +65,19 @@ td3 .req lr
#endif
adcs sum, sum, td0
tst len, #6
- bne .less8_wordlp
+ bne .Lless8_wordlp
-.less8_byte: tst len, #1 @ odd number of bytes
+.Lless8_byte: tst len, #1 @ odd number of bytes
ldrneb td0, [buf], #1 @ include last byte
adcnes sum, sum, td0, put_byte_0 @ update checksum
-.done: adc r0, sum, #0 @ collect up the last carry
+.Ldone: adc r0, sum, #0 @ collect up the last carry
ldr td0, [sp], #4
tst td0, #1 @ check buffer alignment
movne r0, r0, ror #8 @ rotate checksum by 8 bits
ldr pc, [sp], #4 @ return
-.not_aligned: tst buf, #1 @ odd address
+.Lnot_aligned: tst buf, #1 @ odd address
ldrneb td0, [buf], #1 @ make even
subne len, len, #1
adcnes sum, sum, td0, put_byte_1 @ update checksum
@@ -102,14 +102,14 @@ td3 .req lr
ENTRY(csum_partial)
stmfd sp!, {buf, lr}
cmp len, #8 @ Ensure that we have at least
- blo .less8 @ 8 bytes to copy.
+ blo .Lless8 @ 8 bytes to copy.
tst buf, #1
movne sum, sum, ror #8
adds sum, sum, #0 @ C = 0
tst buf, #3 @ Test destination alignment
- blne .not_aligned @ aligh destination, return here
+ blne .Lnot_aligned @ align destination, return here
1: bics ip, len, #31
beq 3f
@@ -131,11 +131,11 @@ ENTRY(csum_partial)
ldmfd sp!, {r4 - r5}
3: tst len, #0x1c @ should not change C
- beq .less4
+ beq .Lless4
4: ldr td0, [buf], #4
sub len, len, #4
adcs sum, sum, td0
tst len, #0x1c
bne 4b
- b .less4
+ b .Lless4
diff --git a/arch/arm/lib/csumpartialcopygeneric.S b/arch/arm/lib/csumpartialcopygeneric.S
index d3a2f4667db4..4a4609c19095 100644
--- a/arch/arm/lib/csumpartialcopygeneric.S
+++ b/arch/arm/lib/csumpartialcopygeneric.S
@@ -22,7 +22,7 @@ dst .req r1
len .req r2
sum .req r3
-.zero: mov r0, sum
+.Lzero: mov r0, sum
load_regs ea
/*
@@ -31,8 +31,9 @@ sum .req r3
* the length. Note that the source pointer hasn't been
* aligned yet.
*/
-.dst_unaligned: tst dst, #1
- beq .dst_16bit
+.Ldst_unaligned:
+ tst dst, #1
+ beq .Ldst_16bit
load1b ip
sub len, len, #1
@@ -41,7 +42,7 @@ sum .req r3
tst dst, #2
moveq pc, lr @ dst is now 32bit aligned
-.dst_16bit: load2b r8, ip
+.Ldst_16bit: load2b r8, ip
sub len, len, #2
adcs sum, sum, r8, put_byte_0
strb r8, [dst], #1
@@ -53,12 +54,12 @@ sum .req r3
* Handle 0 to 7 bytes, with any alignment of source and
* destination pointers. Note that when we get here, C = 0
*/
-.less8: teq len, #0 @ check for zero count
- beq .zero
+.Lless8: teq len, #0 @ check for zero count
+ beq .Lzero
/* we must have at least one byte. */
tst dst, #1 @ dst 16-bit aligned
- beq .less8_aligned
+ beq .Lless8_aligned
/* Align dst */
load1b ip
@@ -66,7 +67,7 @@ sum .req r3
adcs sum, sum, ip, put_byte_1 @ update checksum
strb ip, [dst], #1
tst len, #6
- beq .less8_byteonly
+ beq .Lless8_byteonly
1: load2b r8, ip
sub len, len, #2
@@ -74,15 +75,16 @@ sum .req r3
strb r8, [dst], #1
adcs sum, sum, ip, put_byte_1
strb ip, [dst], #1
-.less8_aligned: tst len, #6
+.Lless8_aligned:
+ tst len, #6
bne 1b
-.less8_byteonly:
+.Lless8_byteonly:
tst len, #1
- beq .done
+ beq .Ldone
load1b r8
adcs sum, sum, r8, put_byte_0 @ update checksum
strb r8, [dst], #1
- b .done
+ b .Ldone
FN_ENTRY
mov ip, sp
@@ -90,11 +92,11 @@ FN_ENTRY
sub fp, ip, #4
cmp len, #8 @ Ensure that we have at least
- blo .less8 @ 8 bytes to copy.
+ blo .Lless8 @ 8 bytes to copy.
adds sum, sum, #0 @ C = 0
tst dst, #3 @ Test destination alignment
- blne .dst_unaligned @ align destination, return here
+ blne .Ldst_unaligned @ align destination, return here
/*
* Ok, the dst pointer is now 32bit aligned, and we know
@@ -103,7 +105,7 @@ FN_ENTRY
*/
tst src, #3 @ Test source alignment
- bne .src_not_aligned
+ bne .Lsrc_not_aligned
/* Routine for src & dst aligned */
@@ -136,17 +138,17 @@ FN_ENTRY
adcs sum, sum, r4
4: ands len, len, #3
- beq .done
+ beq .Ldone
load1l r4
tst len, #2
mov r5, r4, get_byte_0
- beq .exit
+ beq .Lexit
adcs sum, sum, r4, push #16
strb r5, [dst], #1
mov r5, r4, get_byte_1
strb r5, [dst], #1
mov r5, r4, get_byte_2
-.exit: tst len, #1
+.Lexit: tst len, #1
strneb r5, [dst], #1
andne r5, r5, #255
adcnes sum, sum, r5, put_byte_0
@@ -157,20 +159,20 @@ FN_ENTRY
* the inefficient byte manipulations in the
* architecture independent code.
*/
-.done: adc r0, sum, #0
+.Ldone: adc r0, sum, #0
ldr sum, [sp, #0] @ dst
tst sum, #1
movne r0, r0, ror #8
load_regs ea
-.src_not_aligned:
+.Lsrc_not_aligned:
adc sum, sum, #0 @ include C from dst alignment
and ip, src, #3
bic src, src, #3
load1l r5
cmp ip, #2
- beq .src2_aligned
- bhi .src3_aligned
+ beq .Lsrc2_aligned
+ bhi .Lsrc3_aligned
mov r4, r5, pull #8 @ C = 0
bics ip, len, #15
beq 2f
@@ -211,18 +213,18 @@ FN_ENTRY
adcs sum, sum, r4
mov r4, r5, pull #8
4: ands len, len, #3
- beq .done
+ beq .Ldone
mov r5, r4, get_byte_0
tst len, #2
- beq .exit
+ beq .Lexit
adcs sum, sum, r4, push #16
strb r5, [dst], #1
mov r5, r4, get_byte_1
strb r5, [dst], #1
mov r5, r4, get_byte_2
- b .exit
+ b .Lexit
-.src2_aligned: mov r4, r5, pull #16
+.Lsrc2_aligned: mov r4, r5, pull #16
adds sum, sum, #0
bics ip, len, #15
beq 2f
@@ -263,20 +265,20 @@ FN_ENTRY
adcs sum, sum, r4
mov r4, r5, pull #16
4: ands len, len, #3
- beq .done
+ beq .Ldone
mov r5, r4, get_byte_0
tst len, #2
- beq .exit
+ beq .Lexit
adcs sum, sum, r4
strb r5, [dst], #1
mov r5, r4, get_byte_1
strb r5, [dst], #1
tst len, #1
- beq .done
+ beq .Ldone
load1b r5
- b .exit
+ b .Lexit
-.src3_aligned: mov r4, r5, pull #24
+.Lsrc3_aligned: mov r4, r5, pull #24
adds sum, sum, #0
bics ip, len, #15
beq 2f
@@ -317,10 +319,10 @@ FN_ENTRY
adcs sum, sum, r4
mov r4, r5, pull #24
4: ands len, len, #3
- beq .done
+ beq .Ldone
mov r5, r4, get_byte_0
tst len, #2
- beq .exit
+ beq .Lexit
strb r5, [dst], #1
adcs sum, sum, r4
load1l r4
@@ -328,4 +330,4 @@ FN_ENTRY
strb r5, [dst], #1
adcs sum, sum, r4, push #24
mov r5, r4, get_byte_1
- b .exit
+ b .Lexit
diff --git a/arch/arm/lib/delay.S b/arch/arm/lib/delay.S
index 3c7f7e675dd8..b3fb475b4120 100644
--- a/arch/arm/lib/delay.S
+++ b/arch/arm/lib/delay.S
@@ -11,7 +11,7 @@
#include <asm/assembler.h>
.text
-LC0: .word loops_per_jiffy
+.LC0: .word loops_per_jiffy
/*
* 0 <= r0 <= 2000
@@ -21,7 +21,7 @@ ENTRY(__udelay)
orr r2, r2, #0x00db
mul r0, r2, r0
ENTRY(__const_udelay) @ 0 <= r0 <= 0x01ffffff
- ldr r2, LC0
+ ldr r2, .LC0
ldr r2, [r2] @ max = 0x0fffffff
mov r0, r0, lsr #11 @ max = 0x00003fff
mov r2, r2, lsr #11 @ max = 0x0003ffff
diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S
index f055d56ea68a..6f8e27a58c78 100644
--- a/arch/arm/lib/findbit.S
+++ b/arch/arm/lib/findbit.S
@@ -27,7 +27,7 @@ ENTRY(_find_first_zero_bit_le)
mov r2, #0
1: ldrb r3, [r0, r2, lsr #3]
eors r3, r3, #0xff @ invert bits
- bne .found @ any now set - found zero bit
+ bne .L_found @ any now set - found zero bit
add r2, r2, #8 @ next bit pointer
2: cmp r2, r1 @ any more?
blo 1b
@@ -46,7 +46,7 @@ ENTRY(_find_next_zero_bit_le)
ldrb r3, [r0, r2, lsr #3]
eor r3, r3, #0xff @ now looking for a 1 bit
movs r3, r3, lsr ip @ shift off unused bits
- bne .found
+ bne .L_found
orr r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
@@ -61,7 +61,7 @@ ENTRY(_find_first_bit_le)
mov r2, #0
1: ldrb r3, [r0, r2, lsr #3]
movs r3, r3
- bne .found @ any now set - found zero bit
+ bne .L_found @ any now set - found zero bit
add r2, r2, #8 @ next bit pointer
2: cmp r2, r1 @ any more?
blo 1b
@@ -79,7 +79,7 @@ ENTRY(_find_next_bit_le)
beq 1b @ If new byte, goto old routine
ldrb r3, [r0, r2, lsr #3]
movs r3, r3, lsr ip @ shift off unused bits
- bne .found
+ bne .L_found
orr r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
@@ -93,7 +93,7 @@ ENTRY(_find_first_zero_bit_be)
1: eor r3, r2, #0x18 @ big endian byte ordering
ldrb r3, [r0, r3, lsr #3]
eors r3, r3, #0xff @ invert bits
- bne .found @ any now set - found zero bit
+ bne .L_found @ any now set - found zero bit
add r2, r2, #8 @ next bit pointer
2: cmp r2, r1 @ any more?
blo 1b
@@ -109,7 +109,7 @@ ENTRY(_find_next_zero_bit_be)
ldrb r3, [r0, r3, lsr #3]
eor r3, r3, #0xff @ now looking for a 1 bit
movs r3, r3, lsr ip @ shift off unused bits
- bne .found
+ bne .L_found
orr r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
@@ -121,7 +121,7 @@ ENTRY(_find_first_bit_be)
1: eor r3, r2, #0x18 @ big endian byte ordering
ldrb r3, [r0, r3, lsr #3]
movs r3, r3
- bne .found @ any now set - found zero bit
+ bne .L_found @ any now set - found zero bit
add r2, r2, #8 @ next bit pointer
2: cmp r2, r1 @ any more?
blo 1b
@@ -136,7 +136,7 @@ ENTRY(_find_next_bit_be)
eor r3, r2, #0x18 @ big endian byte ordering
ldrb r3, [r0, r3, lsr #3]
movs r3, r3, lsr ip @ shift off unused bits
- bne .found
+ bne .L_found
orr r2, r2, #7 @ if zero, then no bits here
add r2, r2, #1 @ align bit pointer
b 2b @ loop for next bit
@@ -146,7 +146,7 @@ ENTRY(_find_next_bit_be)
/*
* One or more bits in the LSB of r3 are assumed to be set.
*/
-.found:
+.L_found:
#if __LINUX_ARM_ARCH__ >= 5
rsb r1, r3, #0
and r3, r3, r1
diff --git a/arch/arm/lib/io-acorn.S b/arch/arm/lib/io-acorn.S
index 3aacd01d40e1..b153523631c3 100644
--- a/arch/arm/lib/io-acorn.S
+++ b/arch/arm/lib/io-acorn.S
@@ -17,7 +17,7 @@
.text
.align
-.iosl_warning:
+.Liosl_warning:
.ascii "<4>insl/outsl not implemented, called from %08lX\0"
.align
@@ -27,6 +27,6 @@
*/
ENTRY(insl)
ENTRY(outsl)
- adr r0, .iosl_warning
+ adr r0, .Liosl_warning
mov r1, lr
b printk
diff --git a/arch/arm/lib/io-readsb.S b/arch/arm/lib/io-readsb.S
index 081ef749298a..d3d8de71a2c8 100644
--- a/arch/arm/lib/io-readsb.S
+++ b/arch/arm/lib/io-readsb.S
@@ -10,7 +10,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
-.insb_align: rsb ip, ip, #4
+.Linsb_align: rsb ip, ip, #4
cmp ip, r2
movgt ip, r2
cmp ip, #2
@@ -21,20 +21,20 @@
ldrgtb r3, [r0]
strgtb r3, [r1], #1
subs r2, r2, ip
- bne .insb_aligned
+ bne .Linsb_aligned
ENTRY(__raw_readsb)
teq r2, #0 @ do we have to check for the zero len?
moveq pc, lr
ands ip, r1, #3
- bne .insb_align
+ bne .Linsb_align
-.insb_aligned: stmfd sp!, {r4 - r6, lr}
+.Linsb_aligned: stmfd sp!, {r4 - r6, lr}
subs r2, r2, #16
- bmi .insb_no_16
+ bmi .Linsb_no_16
-.insb_16_lp: ldrb r3, [r0]
+.Linsb_16_lp: ldrb r3, [r0]
ldrb r4, [r0]
ldrb r5, [r0]
mov r3, r3, put_byte_0
@@ -69,13 +69,13 @@ ENTRY(__raw_readsb)
stmia r1!, {r3 - r6}
subs r2, r2, #16
- bpl .insb_16_lp
+ bpl .Linsb_16_lp
tst r2, #15
LOADREGS(eqfd, sp!, {r4 - r6, pc})
-.insb_no_16: tst r2, #8
- beq .insb_no_8
+.Linsb_no_16: tst r2, #8
+ beq .Linsb_no_8
ldrb r3, [r0]
ldrb r4, [r0]
@@ -95,8 +95,8 @@ ENTRY(__raw_readsb)
orr r4, r4, ip, put_byte_3
stmia r1!, {r3, r4}
-.insb_no_8: tst r2, #4
- beq .insb_no_4
+.Linsb_no_8: tst r2, #4
+ beq .Linsb_no_4
ldrb r3, [r0]
ldrb r4, [r0]
@@ -108,7 +108,7 @@ ENTRY(__raw_readsb)
orr r3, r3, r6, put_byte_3
str r3, [r1], #4
-.insb_no_4: ands r2, r2, #3
+.Linsb_no_4: ands r2, r2, #3
LOADREGS(eqfd, sp!, {r4 - r6, pc})
cmp r2, #2
diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S
index 476cf7f8a633..146d47c15455 100644
--- a/arch/arm/lib/io-readsw-armv3.S
+++ b/arch/arm/lib/io-readsw-armv3.S
@@ -11,16 +11,16 @@
#include <asm/assembler.h>
#include <asm/hardware.h>
-.insw_bad_alignment:
- adr r0, .insw_bad_align_msg
+.Linsw_bad_alignment:
+ adr r0, .Linsw_bad_align_msg
mov r2, lr
b panic
-.insw_bad_align_msg:
+.Linsw_bad_align_msg:
.asciz "insw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
.align
-.insw_align: tst r1, #1
- bne .insw_bad_alignment
+.Linsw_align: tst r1, #1
+ bne .Linsw_bad_alignment
ldr r3, [r0]
strb r3, [r1], #1
@@ -34,16 +34,16 @@ ENTRY(__raw_readsw)
teq r2, #0 @ do we have to check for the zero len?
moveq pc, lr
tst r1, #3
- bne .insw_align
+ bne .Linsw_align
-.insw_aligned: mov ip, #0xff
+.Linsw_aligned: mov ip, #0xff
orr ip, ip, ip, lsl #8
stmfd sp!, {r4, r5, r6, lr}
subs r2, r2, #8
- bmi .no_insw_8
+ bmi .Lno_insw_8
-.insw_8_lp: ldr r3, [r0]
+.Linsw_8_lp: ldr r3, [r0]
and r3, r3, ip
ldr r4, [r0]
orr r3, r3, r4, lsl #16
@@ -66,13 +66,13 @@ ENTRY(__raw_readsw)
stmia r1!, {r3 - r6}
subs r2, r2, #8
- bpl .insw_8_lp
+ bpl .Linsw_8_lp
tst r2, #7
LOADREGS(eqfd, sp!, {r4, r5, r6, pc})
-.no_insw_8: tst r2, #4
- beq .no_insw_4
+.Lno_insw_8: tst r2, #4
+ beq .Lno_insw_4
ldr r3, [r0]
and r3, r3, ip
@@ -86,8 +86,8 @@ ENTRY(__raw_readsw)
stmia r1!, {r3, r4}
-.no_insw_4: tst r2, #2
- beq .no_insw_2
+.Lno_insw_4: tst r2, #2
+ beq .Lno_insw_2
ldr r3, [r0]
and r3, r3, ip
@@ -96,7 +96,7 @@ ENTRY(__raw_readsw)
str r3, [r1], #4
-.no_insw_2: tst r2, #1
+.Lno_insw_2: tst r2, #1
ldrne r3, [r0]
strneb r3, [r1], #1
movne r3, r3, lsr #8
diff --git a/arch/arm/lib/io-readsw-armv4.S b/arch/arm/lib/io-readsw-armv4.S
index c92b66ecbe86..4db1c5f0b219 100644
--- a/arch/arm/lib/io-readsw-armv4.S
+++ b/arch/arm/lib/io-readsw-armv4.S
@@ -18,8 +18,8 @@
#endif
.endm
-.insw_align: movs ip, r1, lsl #31
- bne .insw_noalign
+.Linsw_align: movs ip, r1, lsl #31
+ bne .Linsw_noalign
ldrh ip, [r0]
sub r2, r2, #1
strh ip, [r1], #2
@@ -28,14 +28,14 @@ ENTRY(__raw_readsw)
teq r2, #0
moveq pc, lr
tst r1, #3
- bne .insw_align
+ bne .Linsw_align
stmfd sp!, {r4, r5, lr}
subs r2, r2, #8
- bmi .no_insw_8
+ bmi .Lno_insw_8
-.insw_8_lp: ldrh r3, [r0]
+.Linsw_8_lp: ldrh r3, [r0]
ldrh r4, [r0]
pack r3, r3, r4
@@ -53,10 +53,10 @@ ENTRY(__raw_readsw)
subs r2, r2, #8
stmia r1!, {r3 - r5, ip}
- bpl .insw_8_lp
+ bpl .Linsw_8_lp
-.no_insw_8: tst r2, #4
- beq .no_insw_4
+.Lno_insw_8: tst r2, #4
+ beq .Lno_insw_4
ldrh r3, [r0]
ldrh r4, [r0]
@@ -68,15 +68,15 @@ ENTRY(__raw_readsw)
stmia r1!, {r3, r4}
-.no_insw_4: movs r2, r2, lsl #31
- bcc .no_insw_2
+.Lno_insw_4: movs r2, r2, lsl #31
+ bcc .Lno_insw_2
ldrh r3, [r0]
ldrh ip, [r0]
pack r3, r3, ip
str r3, [r1], #4
-.no_insw_2: ldrneh r3, [r0]
+.Lno_insw_2: ldrneh r3, [r0]
strneh r3, [r1]
ldmfd sp!, {r4, r5, pc}
@@ -93,7 +93,7 @@ ENTRY(__raw_readsw)
#define pull_hbyte1 lsr #8
#endif
-.insw_noalign: stmfd sp!, {r4, lr}
+.Linsw_noalign: stmfd sp!, {r4, lr}
ldrccb ip, [r1, #-1]!
bcc 1f
diff --git a/arch/arm/lib/io-writesb.S b/arch/arm/lib/io-writesb.S
index 70b2561bdb09..08209fc640ea 100644
--- a/arch/arm/lib/io-writesb.S
+++ b/arch/arm/lib/io-writesb.S
@@ -30,7 +30,7 @@
#endif
.endm
-.outsb_align: rsb ip, ip, #4
+.Loutsb_align: rsb ip, ip, #4
cmp ip, r2
movgt ip, r2
cmp ip, #2
@@ -41,44 +41,45 @@
ldrgtb r3, [r1], #1
strgtb r3, [r0]
subs r2, r2, ip
- bne .outsb_aligned
+ bne .Loutsb_aligned
ENTRY(__raw_writesb)
teq r2, #0 @ do we have to check for the zero len?
moveq pc, lr
ands ip, r1, #3
- bne .outsb_align
+ bne .Loutsb_align
-.outsb_aligned: stmfd sp!, {r4, r5, lr}
+.Loutsb_aligned:
+ stmfd sp!, {r4, r5, lr}
subs r2, r2, #16
- bmi .outsb_no_16
+ bmi .Loutsb_no_16
-.outsb_16_lp: ldmia r1!, {r3, r4, r5, ip}
+.Loutsb_16_lp: ldmia r1!, {r3, r4, r5, ip}
outword r3
outword r4
outword r5
outword ip
subs r2, r2, #16
- bpl .outsb_16_lp
+ bpl .Loutsb_16_lp
tst r2, #15
LOADREGS(eqfd, sp!, {r4, r5, pc})
-.outsb_no_16: tst r2, #8
- beq .outsb_no_8
+.Loutsb_no_16: tst r2, #8
+ beq .Loutsb_no_8
ldmia r1!, {r3, r4}
outword r3
outword r4
-.outsb_no_8: tst r2, #4
- beq .outsb_no_4
+.Loutsb_no_8: tst r2, #4
+ beq .Loutsb_no_4
ldr r3, [r1], #4
outword r3
-.outsb_no_4: ands r2, r2, #3
+.Loutsb_no_4: ands r2, r2, #3
LOADREGS(eqfd, sp!, {r4, r5, pc})
cmp r2, #2
diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S
index 950e7e310f1a..52d62b481295 100644
--- a/arch/arm/lib/io-writesw-armv3.S
+++ b/arch/arm/lib/io-writesw-armv3.S
@@ -11,16 +11,16 @@
#include <asm/assembler.h>
#include <asm/hardware.h>
-.outsw_bad_alignment:
- adr r0, .outsw_bad_align_msg
+.Loutsw_bad_alignment:
+ adr r0, .Loutsw_bad_align_msg
mov r2, lr
b panic
-.outsw_bad_align_msg:
+.Loutsw_bad_align_msg:
.asciz "outsw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
.align
-.outsw_align: tst r1, #1
- bne .outsw_bad_alignment
+.Loutsw_align: tst r1, #1
+ bne .Loutsw_bad_alignment
add r1, r1, #2
@@ -35,14 +35,14 @@ ENTRY(__raw_writesw)
teq r2, #0 @ do we have to check for the zero len?
moveq pc, lr
tst r1, #3
- bne .outsw_align
+ bne .Loutsw_align
-.outsw_aligned: stmfd sp!, {r4, r5, r6, lr}
+ stmfd sp!, {r4, r5, r6, lr}
subs r2, r2, #8
- bmi .no_outsw_8
+ bmi .Lno_outsw_8
-.outsw_8_lp: ldmia r1!, {r3, r4, r5, r6}
+.Loutsw_8_lp: ldmia r1!, {r3, r4, r5, r6}
mov ip, r3, lsl #16
orr ip, ip, ip, lsr #16
@@ -77,13 +77,13 @@ ENTRY(__raw_writesw)
str ip, [r0]
subs r2, r2, #8
- bpl .outsw_8_lp
+ bpl .Loutsw_8_lp
tst r2, #7
LOADREGS(eqfd, sp!, {r4, r5, r6, pc})
-.no_outsw_8: tst r2, #4
- beq .no_outsw_4
+.Lno_outsw_8: tst r2, #4
+ beq .Lno_outsw_4
ldmia r1!, {r3, r4}
@@ -103,8 +103,8 @@ ENTRY(__raw_writesw)
orr ip, ip, ip, lsl #16
str ip, [r0]
-.no_outsw_4: tst r2, #2
- beq .no_outsw_2
+.Lno_outsw_4: tst r2, #2
+ beq .Lno_outsw_2
ldr r3, [r1], #4
@@ -116,7 +116,7 @@ ENTRY(__raw_writesw)
orr ip, ip, ip, lsl #16
str ip, [r0]
-.no_outsw_2: tst r2, #1
+.Lno_outsw_2: tst r2, #1
ldrne r3, [r1]
diff --git a/arch/arm/lib/io-writesw-armv4.S b/arch/arm/lib/io-writesw-armv4.S
index 5e240e452af6..c8e85bd653b7 100644
--- a/arch/arm/lib/io-writesw-armv4.S
+++ b/arch/arm/lib/io-writesw-armv4.S
@@ -22,8 +22,8 @@
#endif
.endm
-.outsw_align: movs ip, r1, lsl #31
- bne .outsw_noalign
+.Loutsw_align: movs ip, r1, lsl #31
+ bne .Loutsw_noalign
ldrh r3, [r1], #2
sub r2, r2, #1
@@ -33,35 +33,35 @@ ENTRY(__raw_writesw)
teq r2, #0
moveq pc, lr
ands r3, r1, #3
- bne .outsw_align
+ bne .Loutsw_align
stmfd sp!, {r4, r5, lr}
subs r2, r2, #8
- bmi .no_outsw_8
+ bmi .Lno_outsw_8
-.outsw_8_lp: ldmia r1!, {r3, r4, r5, ip}
+.Loutsw_8_lp: ldmia r1!, {r3, r4, r5, ip}
subs r2, r2, #8
outword r3
outword r4
outword r5
outword ip
- bpl .outsw_8_lp
+ bpl .Loutsw_8_lp
-.no_outsw_8: tst r2, #4
- beq .no_outsw_4
+.Lno_outsw_8: tst r2, #4
+ beq .Lno_outsw_4
ldmia r1!, {r3, ip}
outword r3
outword ip
-.no_outsw_4: movs r2, r2, lsl #31
- bcc .no_outsw_2
+.Lno_outsw_4: movs r2, r2, lsl #31
+ bcc .Lno_outsw_2
ldr r3, [r1], #4
outword r3
-.no_outsw_2: ldrneh r3, [r1]
+.Lno_outsw_2: ldrneh r3, [r1]
strneh r3, [r0]
ldmfd sp!, {r4, r5, pc}
@@ -74,7 +74,8 @@ ENTRY(__raw_writesw)
#define push_hbyte1 lsl #8
#endif
-.outsw_noalign: ldr r3, [r1, -r3]!
+.Loutsw_noalign:
+ ldr r3, [r1, -r3]!
subcs r2, r2, #1
bcs 2f
subs r2, r2, #2
diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S
index 6f1b5b49fe4c..0cc450f863b6 100644
--- a/arch/arm/lib/uaccess.S
+++ b/arch/arm/lib/uaccess.S
@@ -27,7 +27,7 @@
* Returns : Number of bytes NOT copied.
*/
-.c2u_dest_not_aligned:
+.Lc2u_dest_not_aligned:
rsb ip, ip, #4
cmp ip, #2
ldrb r3, [r1], #1
@@ -37,32 +37,32 @@ USER( strgebt r3, [r0], #1) @ May fault
ldrgtb r3, [r1], #1
USER( strgtbt r3, [r0], #1) @ May fault
sub r2, r2, ip
- b .c2u_dest_aligned
+ b .Lc2u_dest_aligned
ENTRY(__arch_copy_to_user)
stmfd sp!, {r2, r4 - r7, lr}
cmp r2, #4
- blt .c2u_not_enough
+ blt .Lc2u_not_enough
ands ip, r0, #3
- bne .c2u_dest_not_aligned
-.c2u_dest_aligned:
+ bne .Lc2u_dest_not_aligned
+.Lc2u_dest_aligned:
ands ip, r1, #3
- bne .c2u_src_not_aligned
+ bne .Lc2u_src_not_aligned
/*
* Seeing as there has to be at least 8 bytes to copy, we can
* copy one word, and force a user-mode page fault...
*/
-.c2u_0fupi: subs r2, r2, #4
+.Lc2u_0fupi: subs r2, r2, #4
addmi ip, r2, #4
- bmi .c2u_0nowords
+ bmi .Lc2u_0nowords
ldr r3, [r1], #4
USER( strt r3, [r0], #4) @ May fault
mov ip, r0, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
- beq .c2u_0fupi
+ beq .Lc2u_0fupi
/*
* ip = max no. of bytes to copy before needing another "strt" insn
*/
@@ -70,16 +70,16 @@ USER( strt r3, [r0], #4) @ May fault
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #32
- blt .c2u_0rem8lp
+ blt .Lc2u_0rem8lp
-.c2u_0cpy8lp: ldmia r1!, {r3 - r6}
+.Lc2u_0cpy8lp: ldmia r1!, {r3 - r6}
stmia r0!, {r3 - r6} @ Shouldnt fault
ldmia r1!, {r3 - r6}
subs ip, ip, #32
stmia r0!, {r3 - r6} @ Shouldnt fault
- bpl .c2u_0cpy8lp
+ bpl .Lc2u_0cpy8lp
-.c2u_0rem8lp: cmn ip, #16
+.Lc2u_0rem8lp: cmn ip, #16
ldmgeia r1!, {r3 - r6}
stmgeia r0!, {r3 - r6} @ Shouldnt fault
tst ip, #8
@@ -89,33 +89,33 @@ USER( strt r3, [r0], #4) @ May fault
ldrne r3, [r1], #4
strnet r3, [r0], #4 @ Shouldnt fault
ands ip, ip, #3
- beq .c2u_0fupi
-.c2u_0nowords: teq ip, #0
- beq .c2u_finished
-.c2u_nowords: cmp ip, #2
+ beq .Lc2u_0fupi
+.Lc2u_0nowords: teq ip, #0
+ beq .Lc2u_finished
+.Lc2u_nowords: cmp ip, #2
ldrb r3, [r1], #1
USER( strbt r3, [r0], #1) @ May fault
ldrgeb r3, [r1], #1
USER( strgebt r3, [r0], #1) @ May fault
ldrgtb r3, [r1], #1
USER( strgtbt r3, [r0], #1) @ May fault
- b .c2u_finished
+ b .Lc2u_finished
-.c2u_not_enough:
+.Lc2u_not_enough:
movs ip, r2
- bne .c2u_nowords
-.c2u_finished: mov r0, #0
+ bne .Lc2u_nowords
+.Lc2u_finished: mov r0, #0
LOADREGS(fd,sp!,{r2, r4 - r7, pc})
-.c2u_src_not_aligned:
+.Lc2u_src_not_aligned:
bic r1, r1, #3
ldr r7, [r1], #4
cmp ip, #2
- bgt .c2u_3fupi
- beq .c2u_2fupi
-.c2u_1fupi: subs r2, r2, #4
+ bgt .Lc2u_3fupi
+ beq .Lc2u_2fupi
+.Lc2u_1fupi: subs r2, r2, #4
addmi ip, r2, #4
- bmi .c2u_1nowords
+ bmi .Lc2u_1nowords
mov r3, r7, pull #8
ldr r7, [r1], #4
orr r3, r3, r7, push #24
@@ -123,14 +123,14 @@ USER( strt r3, [r0], #4) @ May fault
mov ip, r0, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
- beq .c2u_1fupi
+ beq .Lc2u_1fupi
cmp r2, ip
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #16
- blt .c2u_1rem8lp
+ blt .Lc2u_1rem8lp
-.c2u_1cpy8lp: mov r3, r7, pull #8
+.Lc2u_1cpy8lp: mov r3, r7, pull #8
ldmia r1!, {r4 - r7}
subs ip, ip, #16
orr r3, r3, r4, push #24
@@ -141,9 +141,9 @@ USER( strt r3, [r0], #4) @ May fault
mov r6, r6, pull #8
orr r6, r6, r7, push #24
stmia r0!, {r3 - r6} @ Shouldnt fault
- bpl .c2u_1cpy8lp
+ bpl .Lc2u_1cpy8lp
-.c2u_1rem8lp: tst ip, #8
+.Lc2u_1rem8lp: tst ip, #8
movne r3, r7, pull #8
ldmneia r1!, {r4, r7}
orrne r3, r3, r4, push #24
@@ -156,21 +156,21 @@ USER( strt r3, [r0], #4) @ May fault
orrne r3, r3, r7, push #24
strnet r3, [r0], #4 @ Shouldnt fault
ands ip, ip, #3
- beq .c2u_1fupi
-.c2u_1nowords: mov r3, r7, get_byte_1
+ beq .Lc2u_1fupi
+.Lc2u_1nowords: mov r3, r7, get_byte_1
teq ip, #0
- beq .c2u_finished
+ beq .Lc2u_finished
cmp ip, #2
USER( strbt r3, [r0], #1) @ May fault
movge r3, r7, get_byte_2
USER( strgebt r3, [r0], #1) @ May fault
movgt r3, r7, get_byte_3
USER( strgtbt r3, [r0], #1) @ May fault
- b .c2u_finished
+ b .Lc2u_finished
-.c2u_2fupi: subs r2, r2, #4
+.Lc2u_2fupi: subs r2, r2, #4
addmi ip, r2, #4
- bmi .c2u_2nowords
+ bmi .Lc2u_2nowords
mov r3, r7, pull #16
ldr r7, [r1], #4
orr r3, r3, r7, push #16
@@ -178,14 +178,14 @@ USER( strt r3, [r0], #4) @ May fault
mov ip, r0, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
- beq .c2u_2fupi
+ beq .Lc2u_2fupi
cmp r2, ip
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #16
- blt .c2u_2rem8lp
+ blt .Lc2u_2rem8lp
-.c2u_2cpy8lp: mov r3, r7, pull #16
+.Lc2u_2cpy8lp: mov r3, r7, pull #16
ldmia r1!, {r4 - r7}
subs ip, ip, #16
orr r3, r3, r4, push #16
@@ -196,9 +196,9 @@ USER( strt r3, [r0], #4) @ May fault
mov r6, r6, pull #16
orr r6, r6, r7, push #16
stmia r0!, {r3 - r6} @ Shouldnt fault
- bpl .c2u_2cpy8lp
+ bpl .Lc2u_2cpy8lp
-.c2u_2rem8lp: tst ip, #8
+.Lc2u_2rem8lp: tst ip, #8
movne r3, r7, pull #16
ldmneia r1!, {r4, r7}
orrne r3, r3, r4, push #16
@@ -211,21 +211,21 @@ USER( strt r3, [r0], #4) @ May fault
orrne r3, r3, r7, push #16
strnet r3, [r0], #4 @ Shouldnt fault
ands ip, ip, #3
- beq .c2u_2fupi
-.c2u_2nowords: mov r3, r7, get_byte_2
+ beq .Lc2u_2fupi
+.Lc2u_2nowords: mov r3, r7, get_byte_2
teq ip, #0
- beq .c2u_finished
+ beq .Lc2u_finished
cmp ip, #2
USER( strbt r3, [r0], #1) @ May fault
movge r3, r7, get_byte_3
USER( strgebt r3, [r0], #1) @ May fault
ldrgtb r3, [r1], #0
USER( strgtbt r3, [r0], #1) @ May fault
- b .c2u_finished
+ b .Lc2u_finished
-.c2u_3fupi: subs r2, r2, #4
+.Lc2u_3fupi: subs r2, r2, #4
addmi ip, r2, #4
- bmi .c2u_3nowords
+ bmi .Lc2u_3nowords
mov r3, r7, pull #24
ldr r7, [r1], #4
orr r3, r3, r7, push #8
@@ -233,14 +233,14 @@ USER( strt r3, [r0], #4) @ May fault
mov ip, r0, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
- beq .c2u_3fupi
+ beq .Lc2u_3fupi
cmp r2, ip
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #16
- blt .c2u_3rem8lp
+ blt .Lc2u_3rem8lp
-.c2u_3cpy8lp: mov r3, r7, pull #24
+.Lc2u_3cpy8lp: mov r3, r7, pull #24
ldmia r1!, {r4 - r7}
subs ip, ip, #16
orr r3, r3, r4, push #8
@@ -251,9 +251,9 @@ USER( strt r3, [r0], #4) @ May fault
mov r6, r6, pull #24
orr r6, r6, r7, push #8
stmia r0!, {r3 - r6} @ Shouldnt fault
- bpl .c2u_3cpy8lp
+ bpl .Lc2u_3cpy8lp
-.c2u_3rem8lp: tst ip, #8
+.Lc2u_3rem8lp: tst ip, #8
movne r3, r7, pull #24
ldmneia r1!, {r4, r7}
orrne r3, r3, r4, push #8
@@ -266,17 +266,17 @@ USER( strt r3, [r0], #4) @ May fault
orrne r3, r3, r7, push #8
strnet r3, [r0], #4 @ Shouldnt fault
ands ip, ip, #3
- beq .c2u_3fupi
-.c2u_3nowords: mov r3, r7, get_byte_3
+ beq .Lc2u_3fupi
+.Lc2u_3nowords: mov r3, r7, get_byte_3
teq ip, #0
- beq .c2u_finished
+ beq .Lc2u_finished
cmp ip, #2
USER( strbt r3, [r0], #1) @ May fault
ldrgeb r3, [r1], #1
USER( strgebt r3, [r0], #1) @ May fault
ldrgtb r3, [r1], #0
USER( strgtbt r3, [r0], #1) @ May fault
- b .c2u_finished
+ b .Lc2u_finished
.section .fixup,"ax"
.align 0
@@ -290,7 +290,7 @@ USER( strgtbt r3, [r0], #1) @ May fault
* : n - number of bytes to copy
* Returns : Number of bytes NOT copied.
*/
-.cfu_dest_not_aligned:
+.Lcfu_dest_not_aligned:
rsb ip, ip, #4
cmp ip, #2
USER( ldrbt r3, [r1], #1) @ May fault
@@ -300,31 +300,32 @@ USER( ldrgebt r3, [r1], #1) @ May fault
USER( ldrgtbt r3, [r1], #1) @ May fault
strgtb r3, [r0], #1
sub r2, r2, ip
- b .cfu_dest_aligned
+ b .Lcfu_dest_aligned
ENTRY(__arch_copy_from_user)
stmfd sp!, {r0, r2, r4 - r7, lr}
cmp r2, #4
- blt .cfu_not_enough
+ blt .Lcfu_not_enough
ands ip, r0, #3
- bne .cfu_dest_not_aligned
-.cfu_dest_aligned:
+ bne .Lcfu_dest_not_aligned
+.Lcfu_dest_aligned:
ands ip, r1, #3
- bne .cfu_src_not_aligned
+ bne .Lcfu_src_not_aligned
+
/*
* Seeing as there has to be at least 8 bytes to copy, we can
* copy one word, and force a user-mode page fault...
*/
-.cfu_0fupi: subs r2, r2, #4
+.Lcfu_0fupi: subs r2, r2, #4
addmi ip, r2, #4
- bmi .cfu_0nowords
+ bmi .Lcfu_0nowords
USER( ldrt r3, [r1], #4)
str r3, [r0], #4
mov ip, r1, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
- beq .cfu_0fupi
+ beq .Lcfu_0fupi
/*
* ip = max no. of bytes to copy before needing another "strt" insn
*/
@@ -332,16 +333,16 @@ USER( ldrt r3, [r1], #4)
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #32
- blt .cfu_0rem8lp
+ blt .Lcfu_0rem8lp
-.cfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault
+.Lcfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault
stmia r0!, {r3 - r6}
ldmia r1!, {r3 - r6} @ Shouldnt fault
subs ip, ip, #32
stmia r0!, {r3 - r6}
- bpl .cfu_0cpy8lp
+ bpl .Lcfu_0cpy8lp
-.cfu_0rem8lp: cmn ip, #16
+.Lcfu_0rem8lp: cmn ip, #16
ldmgeia r1!, {r3 - r6} @ Shouldnt fault
stmgeia r0!, {r3 - r6}
tst ip, #8
@@ -351,34 +352,34 @@ USER( ldrt r3, [r1], #4)
ldrnet r3, [r1], #4 @ Shouldnt fault
strne r3, [r0], #4
ands ip, ip, #3
- beq .cfu_0fupi
-.cfu_0nowords: teq ip, #0
- beq .cfu_finished
-.cfu_nowords: cmp ip, #2
+ beq .Lcfu_0fupi
+.Lcfu_0nowords: teq ip, #0
+ beq .Lcfu_finished
+.Lcfu_nowords: cmp ip, #2
USER( ldrbt r3, [r1], #1) @ May fault
strb r3, [r0], #1
USER( ldrgebt r3, [r1], #1) @ May fault
strgeb r3, [r0], #1
USER( ldrgtbt r3, [r1], #1) @ May fault
strgtb r3, [r0], #1
- b .cfu_finished
+ b .Lcfu_finished
-.cfu_not_enough:
+.Lcfu_not_enough:
movs ip, r2
- bne .cfu_nowords
-.cfu_finished: mov r0, #0
+ bne .Lcfu_nowords
+.Lcfu_finished: mov r0, #0
add sp, sp, #8
LOADREGS(fd,sp!,{r4 - r7, pc})
-.cfu_src_not_aligned:
+.Lcfu_src_not_aligned:
bic r1, r1, #3
USER( ldrt r7, [r1], #4) @ May fault
cmp ip, #2
- bgt .cfu_3fupi
- beq .cfu_2fupi
-.cfu_1fupi: subs r2, r2, #4
+ bgt .Lcfu_3fupi
+ beq .Lcfu_2fupi
+.Lcfu_1fupi: subs r2, r2, #4
addmi ip, r2, #4
- bmi .cfu_1nowords
+ bmi .Lcfu_1nowords
mov r3, r7, pull #8
USER( ldrt r7, [r1], #4) @ May fault
orr r3, r3, r7, push #24
@@ -386,14 +387,14 @@ USER( ldrt r7, [r1], #4) @ May fault
mov ip, r1, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
- beq .cfu_1fupi
+ beq .Lcfu_1fupi
cmp r2, ip
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #16
- blt .cfu_1rem8lp
+ blt .Lcfu_1rem8lp
-.cfu_1cpy8lp: mov r3, r7, pull #8
+.Lcfu_1cpy8lp: mov r3, r7, pull #8
ldmia r1!, {r4 - r7} @ Shouldnt fault
subs ip, ip, #16
orr r3, r3, r4, push #24
@@ -404,9 +405,9 @@ USER( ldrt r7, [r1], #4) @ May fault
mov r6, r6, pull #8
orr r6, r6, r7, push #24
stmia r0!, {r3 - r6}
- bpl .cfu_1cpy8lp
+ bpl .Lcfu_1cpy8lp
-.cfu_1rem8lp: tst ip, #8
+.Lcfu_1rem8lp: tst ip, #8
movne r3, r7, pull #8
ldmneia r1!, {r4, r7} @ Shouldnt fault
orrne r3, r3, r4, push #24
@@ -419,21 +420,21 @@ USER( ldrnet r7, [r1], #4) @ May fault
orrne r3, r3, r7, push #24
strne r3, [r0], #4
ands ip, ip, #3
- beq .cfu_1fupi
-.cfu_1nowords: mov r3, r7, get_byte_1
+ beq .Lcfu_1fupi
+.Lcfu_1nowords: mov r3, r7, get_byte_1
teq ip, #0
- beq .cfu_finished
+ beq .Lcfu_finished
cmp ip, #2
strb r3, [r0], #1
movge r3, r7, get_byte_2
strgeb r3, [r0], #1
movgt r3, r7, get_byte_3
strgtb r3, [r0], #1
- b .cfu_finished
+ b .Lcfu_finished
-.cfu_2fupi: subs r2, r2, #4
+.Lcfu_2fupi: subs r2, r2, #4
addmi ip, r2, #4
- bmi .cfu_2nowords
+ bmi .Lcfu_2nowords
mov r3, r7, pull #16
USER( ldrt r7, [r1], #4) @ May fault
orr r3, r3, r7, push #16
@@ -441,14 +442,15 @@ USER( ldrt r7, [r1], #4) @ May fault
mov ip, r1, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
- beq .cfu_2fupi
+ beq .Lcfu_2fupi
cmp r2, ip
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #16
- blt .cfu_2rem8lp
+ blt .Lcfu_2rem8lp
+
-.cfu_2cpy8lp: mov r3, r7, pull #16
+.Lcfu_2cpy8lp: mov r3, r7, pull #16
ldmia r1!, {r4 - r7} @ Shouldnt fault
subs ip, ip, #16
orr r3, r3, r4, push #16
@@ -459,9 +461,9 @@ USER( ldrt r7, [r1], #4) @ May fault
mov r6, r6, pull #16
orr r6, r6, r7, push #16
stmia r0!, {r3 - r6}
- bpl .cfu_2cpy8lp
+ bpl .Lcfu_2cpy8lp
-.cfu_2rem8lp: tst ip, #8
+.Lcfu_2rem8lp: tst ip, #8
movne r3, r7, pull #16
ldmneia r1!, {r4, r7} @ Shouldnt fault
orrne r3, r3, r4, push #16
@@ -474,21 +476,21 @@ USER( ldrnet r7, [r1], #4) @ May fault
orrne r3, r3, r7, push #16
strne r3, [r0], #4
ands ip, ip, #3
- beq .cfu_2fupi
-.cfu_2nowords: mov r3, r7, get_byte_2
+ beq .Lcfu_2fupi
+.Lcfu_2nowords: mov r3, r7, get_byte_2
teq ip, #0
- beq .cfu_finished
+ beq .Lcfu_finished
cmp ip, #2
strb r3, [r0], #1
movge r3, r7, get_byte_3
strgeb r3, [r0], #1
USER( ldrgtbt r3, [r1], #0) @ May fault
strgtb r3, [r0], #1
- b .cfu_finished
+ b .Lcfu_finished
-.cfu_3fupi: subs r2, r2, #4
+.Lcfu_3fupi: subs r2, r2, #4
addmi ip, r2, #4
- bmi .cfu_3nowords
+ bmi .Lcfu_3nowords
mov r3, r7, pull #24
USER( ldrt r7, [r1], #4) @ May fault
orr r3, r3, r7, push #8
@@ -496,14 +498,14 @@ USER( ldrt r7, [r1], #4) @ May fault
mov ip, r1, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
- beq .cfu_3fupi
+ beq .Lcfu_3fupi
cmp r2, ip
movlt ip, r2
sub r2, r2, ip
subs ip, ip, #16
- blt .cfu_3rem8lp
+ blt .Lcfu_3rem8lp
-.cfu_3cpy8lp: mov r3, r7, pull #24
+.Lcfu_3cpy8lp: mov r3, r7, pull #24
ldmia r1!, {r4 - r7} @ Shouldnt fault
orr r3, r3, r4, push #8
mov r4, r4, pull #24
@@ -514,9 +516,9 @@ USER( ldrt r7, [r1], #4) @ May fault
orr r6, r6, r7, push #8
stmia r0!, {r3 - r6}
subs ip, ip, #16
- bpl .cfu_3cpy8lp
+ bpl .Lcfu_3cpy8lp
-.cfu_3rem8lp: tst ip, #8
+.Lcfu_3rem8lp: tst ip, #8
movne r3, r7, pull #24
ldmneia r1!, {r4, r7} @ Shouldnt fault
orrne r3, r3, r4, push #8
@@ -529,17 +531,17 @@ USER( ldrnet r7, [r1], #4) @ May fault
orrne r3, r3, r7, push #8
strne r3, [r0], #4
ands ip, ip, #3
- beq .cfu_3fupi
-.cfu_3nowords: mov r3, r7, get_byte_3
+ beq .Lcfu_3fupi
+.Lcfu_3nowords: mov r3, r7, get_byte_3
teq ip, #0
- beq .cfu_finished
+ beq .Lcfu_finished
cmp ip, #2
strb r3, [r0], #1
USER( ldrgebt r3, [r1], #1) @ May fault
strgeb r3, [r0], #1
USER( ldrgtbt r3, [r1], #1) @ May fault
strgtb r3, [r0], #1
- b .cfu_finished
+ b .Lcfu_finished
.section .fixup,"ax"
.align 0
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index ae7c64b8cec3..048c9c19aa4f 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Mon Oct 10 09:46:25 2005
+# Last update: Fri Nov 11 21:55:04 2005
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
@@ -460,7 +460,7 @@ esl_sarva MACH_ESL_SARVA ESL_SARVA 443
xm250 MACH_XM250 XM250 444
t6tc1xb MACH_T6TC1XB T6TC1XB 445
ess710 MACH_ESS710 ESS710 446
-mx31ads MACH_MX3ADS MX3ADS 447
+mx31ads MACH_MX31ADS MX31ADS 447
himalaya MACH_HIMALAYA HIMALAYA 448
bolfenk MACH_BOLFENK BOLFENK 449
at91rm9200kr MACH_AT91RM9200KR AT91RM9200KR 450
@@ -802,7 +802,7 @@ cpuat91 MACH_CPUAT91 CPUAT91 787
rea9200 MACH_REA9200 REA9200 788
acts_pune_sa1110 MACH_ACTS_PUNE_SA1110 ACTS_PUNE_SA1110 789
ixp425 MACH_IXP425 IXP425 790
-argonplusodyssey MACH_ODYSSEY ODYSSEY 791
+argonplusodyssey MACH_ARGONPLUSODYSSEY ARGONPLUSODYSSEY 791
perch MACH_PERCH PERCH 792
eis05r1 MACH_EIS05R1 EIS05R1 793
pepperpad MACH_PEPPERPAD PEPPERPAD 794
@@ -816,7 +816,7 @@ iq_nextgen_c MACH_IQ_NEXTGEN_C IQ_NEXTGEN_C 801
iq_nextgen_d MACH_IQ_NEXTGEN_D IQ_NEXTGEN_D 802
iq_nextgen_e MACH_IQ_NEXTGEN_E IQ_NEXTGEN_E 803
mallow_at91 MACH_MALLOW_AT91 MALLOW_AT91 804
-cybertracker MACH_CYBERTRACKER CYBERTRACKER 805
+cybertracker_i MACH_CYBERTRACKER_I CYBERTRACKER_I 805
gesbc931x MACH_GESBC931X GESBC931X 806
centipad MACH_CENTIPAD CENTIPAD 807
armsoc MACH_ARMSOC ARMSOC 808
@@ -869,3 +869,38 @@ davinci_dvdp MACH_DAVINCI_DVDP DAVINCI_DVDP 854
htcuniversal MACH_HTCUNIVERSAL HTCUNIVERSAL 855
tpad MACH_TPAD TPAD 856
roverp3 MACH_ROVERP3 ROVERP3 857
+jornada928 MACH_JORNADA928 JORNADA928 858
+mv88fxx81 MACH_MV88FXX81 MV88FXX81 859
+stmp36xx MACH_STMP36XX STMP36XX 860
+sxni79524 MACH_SXNI79524 SXNI79524 861
+ams_delta MACH_AMS_DELTA AMS_DELTA 862
+uranium MACH_URANIUM URANIUM 863
+ucon MACH_UCON UCON 864
+nas100d MACH_NAS100D NAS100D 865
+l083 MACH_L083_1000 L083_1000 866
+ezx MACH_EZX EZX 867
+pnx5220 MACH_PNX5220 PNX5220 868
+butte MACH_BUTTE BUTTE 869
+srm2 MACH_SRM2 SRM2 870
+dsbr MACH_DSBR DSBR 871
+crystalball MACH_CRYSTALBALL CRYSTALBALL 872
+tinypxa27x MACH_TINYPXA27X TINYPXA27X 873
+herbie MACH_HERBIE HERBIE 874
+magician MACH_MAGICIAN MAGICIAN 875
+cm4002 MACH_CM4002 CM4002 876
+b4 MACH_B4 B4 877
+maui MACH_MAUI MAUI 878
+cybertracker_g MACH_CYBERTRACKER_G CYBERTRACKER_G 879
+nxdkn MACH_NXDKN NXDKN 880
+mio8390 MACH_MIO8390 MIO8390 881
+omi_board MACH_OMI_BOARD OMI_BOARD 882
+mx21civ MACH_MX21CIV MX21CIV 883
+mahi_cdac MACH_MAHI_CDAC MAHI_CDAC 884
+xscale_palmtx MACH_XSCALE_PALMTX XSCALE_PALMTX 885
+arch_s3c2413 MACH_ARCH_S3C2413 ARCH_S3C2413 886
+s3c2413 MACH_S3C2413 S3C2413 887
+samsys_ep0 MACH_SAMSYS_EP0 SAMSYS_EP0 888
+wg302v1 MACH_WG302V1 WG302V1 889
+wg302v2 MACH_WG302V2 WG302V2 890
+eb42x MACH_EB42X EB42X 891
+iq331es MACH_IQ331ES IQ331ES 892
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index d4de8a4814be..8796e12c56f3 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -164,6 +164,19 @@ config IA64_PAGE_SIZE_64KB
endchoice
+choice
+ prompt "Page Table Levels"
+ default PGTABLE_3
+
+config PGTABLE_3
+ bool "3 Levels"
+
+config PGTABLE_4
+ depends on !IA64_PAGE_SIZE_64KB
+ bool "4 Levels"
+
+endchoice
+
source kernel/Kconfig.hz
config IA64_BRL_EMU
diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig
index 08112ab38468..87cfd31a4a39 100644
--- a/arch/ia64/configs/sn2_defconfig
+++ b/arch/ia64/configs/sn2_defconfig
@@ -80,6 +80,8 @@ CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_PGTABLE_3 is not set
+CONFIG_PGTABLE_4=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
diff --git a/arch/ia64/defconfig b/arch/ia64/defconfig
index 6e3f147e03e5..275a26c6e5aa 100644
--- a/arch/ia64/defconfig
+++ b/arch/ia64/defconfig
@@ -82,6 +82,8 @@ CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_PGTABLE_3=y
+# CONFIG_PGTABLE_4 is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index c13ca0d49c4a..e06f21f60dc5 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -114,7 +114,7 @@ ENTRY(vhpt_miss)
shl r21=r16,3 // shift bit 60 into sign bit
shr.u r17=r16,61 // get the region number into r17
;;
- shr r22=r21,3
+ shr.u r22=r21,3
#ifdef CONFIG_HUGETLB_PAGE
extr.u r26=r25,2,6
;;
@@ -140,20 +140,34 @@ ENTRY(vhpt_miss)
(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=PTA + IFA(33,42)*8
(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8)
cmp.eq p7,p6=0,r21 // unused address bits all zeroes?
- shr.u r18=r22,PMD_SHIFT // shift L2 index into position
+#ifdef CONFIG_PGTABLE_4
+ shr.u r28=r22,PUD_SHIFT // shift L2 index into position
+#else
+ shr.u r18=r22,PMD_SHIFT // shift L3 index into position
+#endif
;;
ld8 r17=[r17] // fetch the L1 entry (may be 0)
;;
(p7) cmp.eq p6,p7=r17,r0 // was L1 entry NULL?
- dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry
+#ifdef CONFIG_PGTABLE_4
+ dep r28=r28,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry
+ ;;
+ shr.u r18=r22,PMD_SHIFT // shift L3 index into position
+(p7) ld8 r29=[r28] // fetch the L2 entry (may be 0)
;;
-(p7) ld8 r20=[r17] // fetch the L2 entry (may be 0)
- shr.u r19=r22,PAGE_SHIFT // shift L3 index into position
+(p7) cmp.eq.or.andcm p6,p7=r29,r0 // was L2 entry NULL?
+ dep r17=r18,r29,3,(PAGE_SHIFT-3) // compute address of L3 page table entry
+#else
+ dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L3 page table entry
+#endif
;;
-(p7) cmp.eq.or.andcm p6,p7=r20,r0 // was L2 entry NULL?
- dep r21=r19,r20,3,(PAGE_SHIFT-3) // compute address of L3 page table entry
+(p7) ld8 r20=[r17] // fetch the L3 entry (may be 0)
+ shr.u r19=r22,PAGE_SHIFT // shift L4 index into position
;;
-(p7) ld8 r18=[r21] // read the L3 PTE
+(p7) cmp.eq.or.andcm p6,p7=r20,r0 // was L3 entry NULL?
+ dep r21=r19,r20,3,(PAGE_SHIFT-3) // compute address of L4 page table entry
+ ;;
+(p7) ld8 r18=[r21] // read the L4 PTE
mov r19=cr.isr // cr.isr bit 0 tells us if this is an insn miss
;;
(p7) tbit.z p6,p7=r18,_PAGE_P_BIT // page present bit cleared?
@@ -192,14 +206,21 @@ ENTRY(vhpt_miss)
* between reading the pagetable and the "itc". If so, flush the entry we
* inserted and retry.
*/
- ld8 r25=[r21] // read L3 PTE again
- ld8 r26=[r17] // read L2 entry again
+ ld8 r25=[r21] // read L4 entry again
+ ld8 r26=[r17] // read L3 PTE again
+#ifdef CONFIG_PGTABLE_4
+ ld8 r18=[r28] // read L2 entry again
+#endif
+ cmp.ne p6,p7=r0,r0
;;
- cmp.ne p6,p7=r26,r20 // did L2 entry change
+ cmp.ne.or.andcm p6,p7=r26,r20 // did L3 entry change
+#ifdef CONFIG_PGTABLE_4
+ cmp.ne.or.andcm p6,p7=r29,r18 // did L4 PTE change
+#endif
mov r27=PAGE_SHIFT<<2
;;
(p6) ptc.l r22,r27 // purge PTE page translation
-(p7) cmp.ne.or.andcm p6,p7=r25,r18 // did L3 PTE change
+(p7) cmp.ne.or.andcm p6,p7=r25,r18 // did L4 PTE change
;;
(p6) ptc.l r16,r27 // purge translation
#endif
@@ -432,18 +453,30 @@ ENTRY(nested_dtlb_miss)
(p6) dep r17=r18,r19,3,(PAGE_SHIFT-3) // r17=PTA + IFA(33,42)*8
(p7) dep r17=r18,r17,3,(PAGE_SHIFT-6) // r17=PTA + (((IFA(61,63) << 7) | IFA(33,39))*8)
cmp.eq p7,p6=0,r21 // unused address bits all zeroes?
- shr.u r18=r22,PMD_SHIFT // shift L2 index into position
+#ifdef CONFIG_PGTABLE_4
+ shr.u r18=r22,PUD_SHIFT // shift L2 index into position
+#else
+ shr.u r18=r22,PMD_SHIFT // shift L3 index into position
+#endif
;;
ld8 r17=[r17] // fetch the L1 entry (may be 0)
;;
(p7) cmp.eq p6,p7=r17,r0 // was L1 entry NULL?
dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry
;;
+#ifdef CONFIG_PGTABLE_4
(p7) ld8 r17=[r17] // fetch the L2 entry (may be 0)
- shr.u r19=r22,PAGE_SHIFT // shift L3 index into position
+ shr.u r18=r22,PMD_SHIFT // shift L3 index into position
;;
(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was L2 entry NULL?
- dep r17=r19,r17,3,(PAGE_SHIFT-3) // compute address of L3 page table entry
+ dep r17=r18,r17,3,(PAGE_SHIFT-3) // compute address of L2 page table entry
+ ;;
+#endif
+(p7) ld8 r17=[r17] // fetch the L3 entry (may be 0)
+ shr.u r19=r22,PAGE_SHIFT // shift L4 index into position
+ ;;
+(p7) cmp.eq.or.andcm p6,p7=r17,r0 // was L3 entry NULL?
+ dep r17=r19,r17,3,(PAGE_SHIFT-3) // compute address of L4 page table entry
(p6) br.cond.spnt page_fault
mov b0=r30
br.sptk.many b0 // return to continuation point
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index 0fb579ef18c2..e510dce9971f 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -30,6 +30,7 @@
#include <linux/root_dev.h>
#include <linux/nodemask.h>
#include <linux/pm.h>
+#include <linux/efi.h>
#include <asm/io.h>
#include <asm/sal.h>
@@ -242,6 +243,135 @@ static void __init sn_check_for_wars(void)
}
}
+/*
+ * Scan the EFI PCDP table (if it exists) for an acceptable VGA console
+ * output device. If one exists, pick it and set sn_legacy_{io,mem} to
+ * reflect the bus offsets needed to address it.
+ *
+ * Since pcdp support in SN is not supported in the 2.4 kernel (or at least
+ * the one lbs is based on) just declare the needed structs here.
+ *
+ * Reference spec http://www.dig64.org/specifications/DIG64_PCDPv20.pdf
+ *
+ * Returns 0 if no acceptable vga is found, !0 otherwise.
+ *
+ * Note: This stuff is duped here because Altix requires the PCDP to
+ * locate a usable VGA device due to lack of proper ACPI support. Structures
+ * could be used from drivers/firmware/pcdp.h, but it was decided that moving
+ * this file to a more public location just for Altix use was undesireable.
+ */
+
+struct hcdp_uart_desc {
+ u8 pad[45];
+};
+
+struct pcdp {
+ u8 signature[4]; /* should be 'HCDP' */
+ u32 length;
+ u8 rev; /* should be >=3 for pcdp, <3 for hcdp */
+ u8 sum;
+ u8 oem_id[6];
+ u64 oem_tableid;
+ u32 oem_rev;
+ u32 creator_id;
+ u32 creator_rev;
+ u32 num_type0;
+ struct hcdp_uart_desc uart[0]; /* num_type0 of these */
+ /* pcdp descriptors follow */
+} __attribute__((packed));
+
+struct pcdp_device_desc {
+ u8 type;
+ u8 primary;
+ u16 length;
+ u16 index;
+ /* interconnect specific structure follows */
+ /* device specific structure follows that */
+} __attribute__((packed));
+
+struct pcdp_interface_pci {
+ u8 type; /* 1 == pci */
+ u8 reserved;
+ u16 length;
+ u8 segment;
+ u8 bus;
+ u8 dev;
+ u8 fun;
+ u16 devid;
+ u16 vendid;
+ u32 acpi_interrupt;
+ u64 mmio_tra;
+ u64 ioport_tra;
+ u8 flags;
+ u8 translation;
+} __attribute__((packed));
+
+struct pcdp_vga_device {
+ u8 num_eas_desc;
+ /* ACPI Extended Address Space Desc follows */
+} __attribute__((packed));
+
+/* from pcdp_device_desc.primary */
+#define PCDP_PRIMARY_CONSOLE 0x01
+
+/* from pcdp_device_desc.type */
+#define PCDP_CONSOLE_INOUT 0x0
+#define PCDP_CONSOLE_DEBUG 0x1
+#define PCDP_CONSOLE_OUT 0x2
+#define PCDP_CONSOLE_IN 0x3
+#define PCDP_CONSOLE_TYPE_VGA 0x8
+
+#define PCDP_CONSOLE_VGA (PCDP_CONSOLE_TYPE_VGA | PCDP_CONSOLE_OUT)
+
+/* from pcdp_interface_pci.type */
+#define PCDP_IF_PCI 1
+
+/* from pcdp_interface_pci.translation */
+#define PCDP_PCI_TRANS_IOPORT 0x02
+#define PCDP_PCI_TRANS_MMIO 0x01
+
+static void
+sn_scan_pcdp(void)
+{
+ u8 *bp;
+ struct pcdp *pcdp;
+ struct pcdp_device_desc device;
+ struct pcdp_interface_pci if_pci;
+ extern struct efi efi;
+
+ pcdp = efi.hcdp;
+ if (! pcdp)
+ return; /* no hcdp/pcdp table */
+
+ if (pcdp->rev < 3)
+ return; /* only support PCDP (rev >= 3) */
+
+ for (bp = (u8 *)&pcdp->uart[pcdp->num_type0];
+ bp < (u8 *)pcdp + pcdp->length;
+ bp += device.length) {
+ memcpy(&device, bp, sizeof(device));
+ if (! (device.primary & PCDP_PRIMARY_CONSOLE))
+ continue; /* not primary console */
+
+ if (device.type != PCDP_CONSOLE_VGA)
+ continue; /* not VGA descriptor */
+
+ memcpy(&if_pci, bp+sizeof(device), sizeof(if_pci));
+ if (if_pci.type != PCDP_IF_PCI)
+ continue; /* not PCI interconnect */
+
+ if (if_pci.translation & PCDP_PCI_TRANS_IOPORT)
+ vga_console_iobase =
+ if_pci.ioport_tra | __IA64_UNCACHED_OFFSET;
+
+ if (if_pci.translation & PCDP_PCI_TRANS_MMIO)
+ vga_console_membase =
+ if_pci.mmio_tra | __IA64_UNCACHED_OFFSET;
+
+ break; /* once we find the primary, we're done */
+ }
+}
+
/**
* sn_setup - SN platform setup routine
* @cmdline_p: kernel command line
@@ -263,16 +393,35 @@ void __init sn_setup(char **cmdline_p)
#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
/*
- * If there was a primary vga adapter identified through the
- * EFI PCDP table, make it the preferred console. Otherwise
- * zero out conswitchp.
+ * Handle SN vga console.
+ *
+ * SN systems do not have enough ACPI table information
+ * being passed from prom to identify VGA adapters and the legacy
+ * addresses to access them. Until that is done, SN systems rely
+ * on the PCDP table to identify the primary VGA console if one
+ * exists.
+ *
+ * However, kernel PCDP support is optional, and even if it is built
+ * into the kernel, it will not be used if the boot cmdline contains
+ * console= directives.
+ *
+ * So, to work around this mess, we duplicate some of the PCDP code
+ * here so that the primary VGA console (as defined by PCDP) will
+ * work on SN systems even if a different console (e.g. serial) is
+ * selected on the boot line (or CONFIG_EFI_PCDP is off).
*/
+ if (! vga_console_membase)
+ sn_scan_pcdp();
+
if (vga_console_membase) {
/* usable vga ... make tty0 the preferred default console */
- add_preferred_console("tty", 0, NULL);
+ if (!strstr(*cmdline_p, "console="))
+ add_preferred_console("tty", 0, NULL);
} else {
printk(KERN_DEBUG "SGI: Disabling VGA console\n");
+ if (!strstr(*cmdline_p, "console="))
+ add_preferred_console("ttySG", 0, NULL);
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#else
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 28002de783b6..13b8a9bed66e 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -98,6 +98,10 @@
*/
/*
+ * 1998/1/21 -- Richard Gooch <rgooch@atnf.csiro.au> -- devfs support
+ */
+
+/*
* 1998/05/07 -- Russell King -- More portability cleanups; moved definition of
* interrupt and dma channel to asm/floppy.h. Cleaned up some formatting &
* use of '0' for NULL.
@@ -158,10 +162,6 @@ static int print_unex = 1;
#define FDPATCHES
#include <linux/fdreg.h>
-/*
- * 1998/1/21 -- Richard Gooch <rgooch@atnf.csiro.au> -- devfs support
- */
-
#include <linux/fd.h>
#include <linux/hdreg.h>
diff --git a/drivers/char/ftape/lowlevel/ftape-buffer.c b/drivers/char/ftape/lowlevel/ftape-buffer.c
index 54af20cd9a2c..c706ff162771 100644
--- a/drivers/char/ftape/lowlevel/ftape-buffer.c
+++ b/drivers/char/ftape/lowlevel/ftape-buffer.c
@@ -33,6 +33,7 @@
#include "../lowlevel/ftape-rw.h"
#include "../lowlevel/ftape-read.h"
#include "../lowlevel/ftape-tracing.h"
+#include "../lowlevel/ftape-buffer.h"
/* DMA'able memory allocation stuff.
*/
diff --git a/fs/afs/callback.c b/fs/afs/callback.c
index 2fd62f89ae01..9cb206e9d4be 100644
--- a/fs/afs/callback.c
+++ b/fs/afs/callback.c
@@ -19,6 +19,7 @@
#include "server.h"
#include "vnode.h"
#include "internal.h"
+#include "cmservice.h"
/*****************************************************************************/
/*
diff --git a/fs/befs/attribute.c b/fs/befs/attribute.c
deleted file mode 100644
index e329d727053e..000000000000
--- a/fs/befs/attribute.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * linux/fs/befs/attribute.c
- *
- * Copyright (C) 2002 Will Dyson <will_dyson@pobox.com>
- *
- * Many thanks to Dominic Giampaolo, author of "Practical File System
- * Design with the Be File System", for such a helpful book.
- *
- */
-
-#include <linux/fs.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-
-#include "befs.h"
-#include "endian.h"
-
-#define SD_DATA(sd)\
- (void*)((char*)sd + sizeof(*sd) + (sd->name_size - sizeof(sd->name)))
-
-#define SD_NEXT(sd)\
- (befs_small_data*)((char*)sd + sizeof(*sd) + (sd->name_size - \
- sizeof(sd->name) + sd->data_size))
-
-int
-list_small_data(struct super_block *sb, befs_inode * inode, filldir_t filldir);
-
-befs_small_data *
-find_small_data(struct super_block *sb, befs_inode * inode,
- const char *name);
-int
-read_small_data(struct super_block *sb, befs_inode * inode,
- befs_small_data * sdata, void *buf, size_t bufsize);
-
-/**
- *
- *
- *
- *
- *
- */
-befs_small_data *
-find_small_data(struct super_block *sb, befs_inode * inode, const char *name)
-{
- befs_small_data *sdata = inode->small_data;
-
- while (sdata->type != 0) {
- if (strcmp(name, sdata->name) != 0) {
- return sdata;
- }
- sdata = SD_NEXT(sdata);
- }
- return NULL;
-}
-
-/**
- *
- *
- *
- *
- *
- */
-int
-read_small_data(struct super_block *sb, befs_inode * inode,
- const char *name, void *buf, size_t bufsize)
-{
- befs_small_data *sdata;
-
- sdata = find_small_data(sb, inode, name);
- if (sdata == NULL)
- return BEFS_ERR;
- else if (sdata->data_size > bufsize)
- return BEFS_ERR;
-
- memcpy(buf, SD_DATA(sdata), sdata->data_size);
-
- return BEFS_OK;
-}
-
-/**
- *
- *
- *
- *
- *
- */
-int
-list_small_data(struct super_block *sb, befs_inode * inode)
-{
-
-}
-
-/**
- *
- *
- *
- *
- *
- */
-int
-list_attr(struct super_block *sb, befs_inode * inode)
-{
-
-}
-
-/**
- *
- *
- *
- *
- *
- */
-int
-read_attr(struct super_block *sb, befs_inode * inode)
-{
-
-}
diff --git a/fs/freevxfs/vxfs_bmap.c b/fs/freevxfs/vxfs_bmap.c
index d3f6b2835bc8..2d71128bd8d6 100644
--- a/fs/freevxfs/vxfs_bmap.c
+++ b/fs/freevxfs/vxfs_bmap.c
@@ -36,6 +36,7 @@
#include "vxfs.h"
#include "vxfs_inode.h"
+#include "vxfs_extern.h"
#ifdef DIAGNOSTIC
diff --git a/fs/freevxfs/vxfs_olt.c b/fs/freevxfs/vxfs_olt.c
index 133476201d84..76a0708ae978 100644
--- a/fs/freevxfs/vxfs_olt.c
+++ b/fs/freevxfs/vxfs_olt.c
@@ -36,6 +36,7 @@
#include "vxfs.h"
#include "vxfs_olt.h"
+#include "vxfs_extern.h"
static inline void
diff --git a/fs/ioprio.c b/fs/ioprio.c
index d1c1f2b2c9da..4bf1c6365a19 100644
--- a/fs/ioprio.c
+++ b/fs/ioprio.c
@@ -22,6 +22,7 @@
#include <linux/kernel.h>
#include <linux/ioprio.h>
#include <linux/blkdev.h>
+#include <linux/syscalls.h>
static int set_task_ioprio(struct task_struct *task, int ioprio)
{
diff --git a/fs/jffs/jffs_fm.c b/fs/jffs/jffs_fm.c
index 053e3a98a276..6da13b309bd1 100644
--- a/fs/jffs/jffs_fm.c
+++ b/fs/jffs/jffs_fm.c
@@ -20,6 +20,7 @@
#include <linux/blkdev.h>
#include <linux/jffs.h>
#include "jffs_fm.h"
+#include "intrep.h"
#if defined(JFFS_MARK_OBSOLETE) && JFFS_MARK_OBSOLETE
static int jffs_mark_obsolete(struct jffs_fmcontrol *fmc, __u32 fm_offset);
diff --git a/fs/partitions/ultrix.c b/fs/partitions/ultrix.c
index 8a8d4d9db314..ec852c11dce4 100644
--- a/fs/partitions/ultrix.c
+++ b/fs/partitions/ultrix.c
@@ -7,6 +7,7 @@
*/
#include "check.h"
+#include "ultrix.h"
int ultrix_partition(struct parsed_partitions *state, struct block_device *bdev)
{
diff --git a/fs/reiserfs/hashes.c b/fs/reiserfs/hashes.c
index 37c1306eb9b7..a3ec238fd9e0 100644
--- a/fs/reiserfs/hashes.c
+++ b/fs/reiserfs/hashes.c
@@ -19,6 +19,7 @@
//
#include <linux/kernel.h>
+#include <linux/reiserfs_fs.h>
#include <asm/types.h>
#include <asm/bug.h>
diff --git a/include/asm-ia64/page.h b/include/asm-ia64/page.h
index 9d41548b7fef..9dd9da105278 100644
--- a/include/asm-ia64/page.h
+++ b/include/asm-ia64/page.h
@@ -47,8 +47,6 @@
#define PERCPU_PAGE_SHIFT 16 /* log2() of max. size of per-CPU area */
#define PERCPU_PAGE_SIZE (__IA64_UL_CONST(1) << PERCPU_PAGE_SHIFT)
-#define RGN_MAP_LIMIT ((1UL << (4*PAGE_SHIFT - 12)) - PAGE_SIZE) /* per region addr limit */
-
#ifdef CONFIG_HUGETLB_PAGE
# define HPAGE_REGION_BASE RGN_BASE(RGN_HPAGE)
@@ -175,11 +173,17 @@ get_order (unsigned long size)
*/
typedef struct { unsigned long pte; } pte_t;
typedef struct { unsigned long pmd; } pmd_t;
+#ifdef CONFIG_PGTABLE_4
+ typedef struct { unsigned long pud; } pud_t;
+#endif
typedef struct { unsigned long pgd; } pgd_t;
typedef struct { unsigned long pgprot; } pgprot_t;
# define pte_val(x) ((x).pte)
# define pmd_val(x) ((x).pmd)
+#ifdef CONFIG_PGTABLE_4
+# define pud_val(x) ((x).pud)
+#endif
# define pgd_val(x) ((x).pgd)
# define pgprot_val(x) ((x).pgprot)
diff --git a/include/asm-ia64/pgalloc.h b/include/asm-ia64/pgalloc.h
index a5f214554afd..f2f233846476 100644
--- a/include/asm-ia64/pgalloc.h
+++ b/include/asm-ia64/pgalloc.h
@@ -86,6 +86,25 @@ static inline void pgd_free(pgd_t * pgd)
pgtable_quicklist_free(pgd);
}
+#ifdef CONFIG_PGTABLE_4
+static inline void
+pgd_populate(struct mm_struct *mm, pgd_t * pgd_entry, pud_t * pud)
+{
+ pgd_val(*pgd_entry) = __pa(pud);
+}
+
+static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+ return pgtable_quicklist_alloc();
+}
+
+static inline void pud_free(pud_t * pud)
+{
+ pgtable_quicklist_free(pud);
+}
+#define __pud_free_tlb(tlb, pud) pud_free(pud)
+#endif /* CONFIG_PGTABLE_4 */
+
static inline void
pud_populate(struct mm_struct *mm, pud_t * pud_entry, pmd_t * pmd)
{
diff --git a/include/asm-ia64/pgtable.h b/include/asm-ia64/pgtable.h
index c34ba80c1c31..e2560c58384b 100644
--- a/include/asm-ia64/pgtable.h
+++ b/include/asm-ia64/pgtable.h
@@ -84,32 +84,55 @@
#define __DIRTY_BITS _PAGE_ED | __DIRTY_BITS_NO_ED
/*
- * Definitions for first level:
- *
- * PGDIR_SHIFT determines what a first-level page table entry can map.
+ * How many pointers will a page table level hold expressed in shift
*/
-#define PGDIR_SHIFT (PAGE_SHIFT + 2*(PAGE_SHIFT-3))
-#define PGDIR_SIZE (__IA64_UL(1) << PGDIR_SHIFT)
-#define PGDIR_MASK (~(PGDIR_SIZE-1))
-#define PTRS_PER_PGD (1UL << (PAGE_SHIFT-3))
-#define USER_PTRS_PER_PGD (5*PTRS_PER_PGD/8) /* regions 0-4 are user regions */
-#define FIRST_USER_ADDRESS 0
+#define PTRS_PER_PTD_SHIFT (PAGE_SHIFT-3)
/*
- * Definitions for second level:
+ * Definitions for fourth level:
+ */
+#define PTRS_PER_PTE (__IA64_UL(1) << (PTRS_PER_PTD_SHIFT))
+
+/*
+ * Definitions for third level:
*
- * PMD_SHIFT determines the size of the area a second-level page table
+ * PMD_SHIFT determines the size of the area a third-level page table
* can map.
*/
-#define PMD_SHIFT (PAGE_SHIFT + (PAGE_SHIFT-3))
+#define PMD_SHIFT (PAGE_SHIFT + (PTRS_PER_PTD_SHIFT))
#define PMD_SIZE (1UL << PMD_SHIFT)
#define PMD_MASK (~(PMD_SIZE-1))
-#define PTRS_PER_PMD (1UL << (PAGE_SHIFT-3))
+#define PTRS_PER_PMD (1UL << (PTRS_PER_PTD_SHIFT))
+#ifdef CONFIG_PGTABLE_4
/*
- * Definitions for third level:
+ * Definitions for second level:
+ *
+ * PUD_SHIFT determines the size of the area a second-level page table
+ * can map.
*/
-#define PTRS_PER_PTE (__IA64_UL(1) << (PAGE_SHIFT-3))
+#define PUD_SHIFT (PMD_SHIFT + (PTRS_PER_PTD_SHIFT))
+#define PUD_SIZE (1UL << PUD_SHIFT)
+#define PUD_MASK (~(PUD_SIZE-1))
+#define PTRS_PER_PUD (1UL << (PTRS_PER_PTD_SHIFT))
+#endif
+
+/*
+ * Definitions for first level:
+ *
+ * PGDIR_SHIFT determines what a first-level page table entry can map.
+ */
+#ifdef CONFIG_PGTABLE_4
+#define PGDIR_SHIFT (PUD_SHIFT + (PTRS_PER_PTD_SHIFT))
+#else
+#define PGDIR_SHIFT (PMD_SHIFT + (PTRS_PER_PTD_SHIFT))
+#endif
+#define PGDIR_SIZE (__IA64_UL(1) << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE-1))
+#define PTRS_PER_PGD_SHIFT PTRS_PER_PTD_SHIFT
+#define PTRS_PER_PGD (1UL << PTRS_PER_PGD_SHIFT)
+#define USER_PTRS_PER_PGD (5*PTRS_PER_PGD/8) /* regions 0-4 are user regions */
+#define FIRST_USER_ADDRESS 0
/*
* All the normal masks have the "page accessed" bits on, as any time
@@ -161,6 +184,9 @@
#define __S111 __pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RWX)
#define pgd_ERROR(e) printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e))
+#ifdef CONFIG_PGTABLE_4
+#define pud_ERROR(e) printk("%s:%d: bad pud %016lx.\n", __FILE__, __LINE__, pud_val(e))
+#endif
#define pmd_ERROR(e) printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e))
#define pte_ERROR(e) printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
@@ -218,6 +244,9 @@ ia64_phys_addr_valid (unsigned long addr)
#define kc_vaddr_to_offset(v) ((v) - RGN_BASE(RGN_GATE))
#define kc_offset_to_vaddr(o) ((o) + RGN_BASE(RGN_GATE))
+#define RGN_MAP_SHIFT (PGDIR_SHIFT + PTRS_PER_PGD_SHIFT - 3)
+#define RGN_MAP_LIMIT ((1UL << RGN_MAP_SHIFT) - PAGE_SIZE) /* per region addr limit */
+
/*
* Conversion functions: convert page frame number (pfn) and a protection value to a page
* table entry (pte).
@@ -254,9 +283,16 @@ ia64_phys_addr_valid (unsigned long addr)
#define pud_bad(pud) (!ia64_phys_addr_valid(pud_val(pud)))
#define pud_present(pud) (pud_val(pud) != 0UL)
#define pud_clear(pudp) (pud_val(*(pudp)) = 0UL)
-
#define pud_page(pud) ((unsigned long) __va(pud_val(pud) & _PFN_MASK))
+#ifdef CONFIG_PGTABLE_4
+#define pgd_none(pgd) (!pgd_val(pgd))
+#define pgd_bad(pgd) (!ia64_phys_addr_valid(pgd_val(pgd)))
+#define pgd_present(pgd) (pgd_val(pgd) != 0UL)
+#define pgd_clear(pgdp) (pgd_val(*(pgdp)) = 0UL)
+#define pgd_page(pgd) ((unsigned long) __va(pgd_val(pgd) & _PFN_MASK))
+#endif
+
/*
* The following have defined behavior only work if pte_present() is true.
*/
@@ -324,7 +360,13 @@ pgd_offset (struct mm_struct *mm, unsigned long address)
here. */
#define pgd_offset_gate(mm, addr) pgd_offset_k(addr)
+#ifdef CONFIG_PGTABLE_4
/* Find an entry in the second-level page table.. */
+#define pud_offset(dir,addr) \
+ ((pud_t *) pgd_page(*(dir)) + (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1)))
+#endif
+
+/* Find an entry in the third-level page table.. */
#define pmd_offset(dir,addr) \
((pmd_t *) pud_page(*(dir)) + (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1)))
@@ -557,7 +599,9 @@ do { \
#define __HAVE_ARCH_PGD_OFFSET_GATE
#define __HAVE_ARCH_LAZY_MMU_PROT_UPDATE
+#ifndef CONFIG_PGTABLE_4
#include <asm-generic/pgtable-nopud.h>
+#endif
#include <asm-generic/pgtable.h>
#endif /* _ASM_IA64_PGTABLE_H */
diff --git a/include/linux/idr.h b/include/linux/idr.h
index 7fb3ff9c7b0e..d37c8d808b0f 100644
--- a/include/linux/idr.h
+++ b/include/linux/idr.h
@@ -8,6 +8,10 @@
* Small id to pointer translation service avoiding fixed sized
* tables.
*/
+
+#ifndef __IDR_H__
+#define __IDR_H__
+
#include <linux/types.h>
#include <linux/bitops.h>
@@ -77,3 +81,5 @@ int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id);
void idr_remove(struct idr *idp, int id);
void idr_destroy(struct idr *idp);
void idr_init(struct idr *idp);
+
+#endif /* __IDR_H__ */
diff --git a/mm/slab.c b/mm/slab.c
index e291f5e1afbb..8a73dcfc6a27 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -434,7 +434,7 @@ struct kmem_cache {
/* Optimization question: fewer reaps means less
* probability for unnessary cpucache drain/refill cycles.
*
- * OTHO the cpuarrays can contain lots of objects,
+ * OTOH the cpuarrays can contain lots of objects,
* which could lock up otherwise freeable slabs.
*/
#define REAPTIMEOUT_CPUC (2*HZ)