summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/blockdev/cciss.txt10
-rw-r--r--drivers/block/cciss.c56
-rw-r--r--drivers/block/cciss.h1
3 files changed, 56 insertions, 11 deletions
diff --git a/Documentation/blockdev/cciss.txt b/Documentation/blockdev/cciss.txt
index c00c6a5ab21f..71464e09ec18 100644
--- a/Documentation/blockdev/cciss.txt
+++ b/Documentation/blockdev/cciss.txt
@@ -78,6 +78,16 @@ The device naming scheme is:
/dev/cciss/c1d1p2 Controller 1, disk 1, partition 2
/dev/cciss/c1d1p3 Controller 1, disk 1, partition 3
+CCISS simple mode support
+-------------------------
+
+The "cciss_simple_mode=1" boot parameter may be used to prevent the driver
+from putting the controller into "performant" mode. The difference is that
+with simple mode, each command completion requires an interrupt, while with
+"performant mode" (the default, and ordinarily better performing) it is
+possible to have multiple command completions indicated by a single
+interrupt.
+
SCSI tape drive and medium changer support
------------------------------------------
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 8f4ef656a1af..61f0b5b6a415 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -68,6 +68,10 @@ static int cciss_tape_cmds = 6;
module_param(cciss_tape_cmds, int, 0644);
MODULE_PARM_DESC(cciss_tape_cmds,
"number of commands to allocate for tape devices (default: 6)");
+static int cciss_simple_mode;
+module_param(cciss_simple_mode, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(cciss_simple_mode,
+ "Use 'simple mode' rather than 'performant mode'");
static DEFINE_MUTEX(cciss_mutex);
static struct proc_dir_entry *proc_cciss;
@@ -176,6 +180,7 @@ static void cciss_geometry_inquiry(ctlr_info_t *h, int logvol,
unsigned int block_size, InquiryData_struct *inq_buff,
drive_info_struct *drv);
static void __devinit cciss_interrupt_mode(ctlr_info_t *);
+static int __devinit cciss_enter_simple_mode(struct ctlr_info *h);
static void start_io(ctlr_info_t *h);
static int sendcmd_withirq(ctlr_info_t *h, __u8 cmd, void *buff, size_t size,
__u8 page_code, unsigned char scsi3addr[],
@@ -388,7 +393,7 @@ static void cciss_seq_show_header(struct seq_file *seq)
h->product_name,
(unsigned long)h->board_id,
h->firm_ver[0], h->firm_ver[1], h->firm_ver[2],
- h->firm_ver[3], (unsigned int)h->intr[PERF_MODE_INT],
+ h->firm_ver[3], (unsigned int)h->intr[h->intr_mode],
h->num_luns,
h->Qdepth, h->commands_outstanding,
h->maxQsinceinit, h->max_outstanding, h->maxSG);
@@ -3984,6 +3989,9 @@ static void __devinit cciss_put_controller_into_performant_mode(ctlr_info_t *h)
{
__u32 trans_support;
+ if (cciss_simple_mode)
+ return;
+
dev_dbg(&h->pdev->dev, "Trying to put board into Performant mode\n");
/* Attempt to put controller into performant mode if supported */
/* Does board support performant mode? */
@@ -4081,7 +4089,7 @@ static void __devinit cciss_interrupt_mode(ctlr_info_t *h)
default_int_mode:
#endif /* CONFIG_PCI_MSI */
/* if we get here we're going to use the default interrupt mode */
- h->intr[PERF_MODE_INT] = h->pdev->irq;
+ h->intr[h->intr_mode] = h->pdev->irq;
return;
}
@@ -4341,6 +4349,9 @@ static int __devinit cciss_pci_init(ctlr_info_t *h)
}
cciss_enable_scsi_prefetch(h);
cciss_p600_dma_prefetch_quirk(h);
+ err = cciss_enter_simple_mode(h);
+ if (err)
+ goto err_out_free_res;
cciss_put_controller_into_performant_mode(h);
return 0;
@@ -4843,20 +4854,20 @@ static int cciss_request_irq(ctlr_info_t *h,
irqreturn_t (*intxhandler)(int, void *))
{
if (h->msix_vector || h->msi_vector) {
- if (!request_irq(h->intr[PERF_MODE_INT], msixhandler,
+ if (!request_irq(h->intr[h->intr_mode], msixhandler,
IRQF_DISABLED, h->devname, h))
return 0;
dev_err(&h->pdev->dev, "Unable to get msi irq %d"
- " for %s\n", h->intr[PERF_MODE_INT],
+ " for %s\n", h->intr[h->intr_mode],
h->devname);
return -1;
}
- if (!request_irq(h->intr[PERF_MODE_INT], intxhandler,
+ if (!request_irq(h->intr[h->intr_mode], intxhandler,
IRQF_DISABLED, h->devname, h))
return 0;
dev_err(&h->pdev->dev, "Unable to get irq %d for %s\n",
- h->intr[PERF_MODE_INT], h->devname);
+ h->intr[h->intr_mode], h->devname);
return -1;
}
@@ -4887,7 +4898,7 @@ static void cciss_undo_allocations_after_kdump_soft_reset(ctlr_info_t *h)
{
int ctlr = h->ctlr;
- free_irq(h->intr[PERF_MODE_INT], h);
+ free_irq(h->intr[h->intr_mode], h);
#ifdef CONFIG_PCI_MSI
if (h->msix_vector)
pci_disable_msix(h->pdev);
@@ -4953,6 +4964,7 @@ reinit_after_soft_reset:
h = hba[i];
h->pdev = pdev;
h->busy_initializing = 1;
+ h->intr_mode = cciss_simple_mode ? SIMPLE_MODE_INT : PERF_MODE_INT;
INIT_LIST_HEAD(&h->cmpQ);
INIT_LIST_HEAD(&h->reqQ);
mutex_init(&h->busy_shutting_down);
@@ -5009,7 +5021,7 @@ reinit_after_soft_reset:
dev_info(&h->pdev->dev, "%s: <0x%x> at PCI %s IRQ %d%s using DAC\n",
h->devname, pdev->device, pci_name(pdev),
- h->intr[PERF_MODE_INT], dac ? "" : " not");
+ h->intr[h->intr_mode], dac ? "" : " not");
if (cciss_allocate_cmd_pool(h))
goto clean4;
@@ -5056,7 +5068,7 @@ reinit_after_soft_reset:
spin_lock_irqsave(&h->lock, flags);
h->access.set_intr_mask(h, CCISS_INTR_OFF);
spin_unlock_irqrestore(&h->lock, flags);
- free_irq(h->intr[PERF_MODE_INT], h);
+ free_irq(h->intr[h->intr_mode], h);
rc = cciss_request_irq(h, cciss_msix_discard_completions,
cciss_intx_discard_completions);
if (rc) {
@@ -5133,7 +5145,7 @@ clean4:
cciss_free_cmd_pool(h);
cciss_free_scatterlists(h);
cciss_free_sg_chain_blocks(h->cmd_sg_list, h->nr_cmds);
- free_irq(h->intr[PERF_MODE_INT], h);
+ free_irq(h->intr[h->intr_mode], h);
clean2:
unregister_blkdev(h->major, h->devname);
clean1:
@@ -5172,9 +5184,31 @@ static void cciss_shutdown(struct pci_dev *pdev)
if (return_code != IO_OK)
dev_warn(&h->pdev->dev, "Error flushing cache\n");
h->access.set_intr_mask(h, CCISS_INTR_OFF);
- free_irq(h->intr[PERF_MODE_INT], h);
+ free_irq(h->intr[h->intr_mode], h);
}
+static int __devinit cciss_enter_simple_mode(struct ctlr_info *h)
+{
+ u32 trans_support;
+
+ trans_support = readl(&(h->cfgtable->TransportSupport));
+ if (!(trans_support & SIMPLE_MODE))
+ return -ENOTSUPP;
+
+ h->max_commands = readl(&(h->cfgtable->CmdsOutMax));
+ writel(CFGTBL_Trans_Simple, &(h->cfgtable->HostWrite.TransportRequest));
+ writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
+ cciss_wait_for_mode_change_ack(h);
+ print_cfg_table(h);
+ if (!(readl(&(h->cfgtable->TransportActive)) & CFGTBL_Trans_Simple)) {
+ dev_warn(&h->pdev->dev, "unable to get board into simple mode\n");
+ return -ENODEV;
+ }
+ h->transMethod = CFGTBL_Trans_Simple;
+ return 0;
+}
+
+
static void __devexit cciss_remove_one(struct pci_dev *pdev)
{
ctlr_info_t *h;
diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h
index c049548e68b7..7fda30e4a241 100644
--- a/drivers/block/cciss.h
+++ b/drivers/block/cciss.h
@@ -92,6 +92,7 @@ struct ctlr_info
unsigned int intr[4];
unsigned int msix_vector;
unsigned int msi_vector;
+ int intr_mode;
int cciss_max_sectors;
BYTE cciss_read;
BYTE cciss_write;