diff options
| -rw-r--r-- | drivers/mtd/spi-nor/spi-nor.c | 52 | ||||
| -rw-r--r-- | include/linux/mtd/spi-nor.h | 4 |
2 files changed, 56 insertions, 0 deletions
diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index c713c8656710..7da3a7067c35 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -48,6 +48,25 @@ static int read_sr(struct spi_nor *nor) } /* + * Read the flag status register, returning its value in the location + * Return the status register value. + * Returns negative if error occurred. + */ +static int read_fsr(struct spi_nor *nor) +{ + int ret; + u8 val; + + ret = nor->read_reg(nor, SPINOR_OP_RDFSR, &val, 1); + if (ret < 0) { + pr_err("error %d reading FSR\n", ret); + return ret; + } + + return val; +} + +/* * Read configuration register, returning its value in the * location. Return the configuration register value. * Returns negative if error occured. @@ -165,6 +184,32 @@ static int spi_nor_wait_till_ready(struct spi_nor *nor) return -ETIMEDOUT; } +static int spi_nor_wait_till_fsr_ready(struct spi_nor *nor) +{ + unsigned long deadline; + int sr; + int fsr; + + deadline = jiffies + MAX_READY_WAIT_JIFFIES; + + do { + cond_resched(); + + sr = read_sr(nor); + if (sr < 0) { + break; + } else if (!(sr & SR_WIP)) { + fsr = read_fsr(nor); + if (fsr < 0) + break; + if (fsr & FSR_READY) + return 0; + } + } while (!time_after_eq(jiffies, deadline)); + + return -ETIMEDOUT; +} + /* * Service routine to read status register until ready, or timeout occurs. * Returns non-zero if error. @@ -402,6 +447,7 @@ struct flash_info { #define SECT_4K_PMC 0x10 /* SPINOR_OP_BE_4K_PMC works uniformly */ #define SPI_NOR_DUAL_READ 0x20 /* Flash supports Dual Read */ #define SPI_NOR_QUAD_READ 0x40 /* Flash supports Quad Read */ +#define USE_FSR 0x80 /* use flag status register */ }; #define INFO(_jedec_id, _ext_id, _sector_size, _n_sectors, _flags) \ @@ -488,6 +534,8 @@ const struct spi_device_id spi_nor_ids[] = { { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, 0) }, { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K) }, { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K) }, + { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, USE_FSR) }, + { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048, USE_FSR) }, /* PMC */ { "pm25lv512", INFO(0, 0, 32 * 1024, 2, SECT_4K_PMC) }, @@ -965,6 +1013,10 @@ int spi_nor_scan(struct spi_nor *nor, const struct spi_device_id *id, else mtd->_write = spi_nor_write; + if ((info->flags & USE_FSR) && + nor->wait_till_ready == spi_nor_wait_till_ready) + nor->wait_till_ready = spi_nor_wait_till_fsr_ready; + /* prefer "small sector" erase if possible */ if (info->flags & SECT_4K) { nor->erase_opcode = SPINOR_OP_BE_4K; diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 53241842a7ab..9e6294f32ba8 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -34,6 +34,7 @@ #define SPINOR_OP_SE 0xd8 /* Sector erase (usually 64KiB) */ #define SPINOR_OP_RDID 0x9f /* Read JEDEC ID */ #define SPINOR_OP_RDCR 0x35 /* Read configuration register */ +#define SPINOR_OP_RDFSR 0x70 /* Read flag status register */ /* 4-byte address opcodes - used on Spansion and some Macronix flashes. */ #define SPINOR_OP_READ4 0x13 /* Read data bytes (low frequency) */ @@ -66,6 +67,9 @@ #define SR_QUAD_EN_MX 0x40 /* Macronix Quad I/O */ +/* Flag Status Register bits */ +#define FSR_READY 0x80 + /* Configuration Register bits. */ #define CR_QUAD_EN_SPAN 0x2 /* Spansion Quad I/O */ |