summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/networking/00-INDEX3
-rw-r--r--Documentation/networking/sk98lin.txt568
-rw-r--r--drivers/atm/firestream.c1
-rw-r--r--drivers/atm/he.c3
-rw-r--r--drivers/atm/idt77252.c6
-rw-r--r--drivers/atm/iphase.c2
-rw-r--r--drivers/net/Kconfig2
-rw-r--r--drivers/net/bfin_mac.c2
-rw-r--r--drivers/net/bonding/bond_sysfs.c1
-rw-r--r--drivers/net/forcedeth.c18
-rw-r--r--drivers/net/ibm_newemac/core.c4
-rw-r--r--drivers/net/s2io.c2
-rw-r--r--drivers/net/tulip/eeprom.c6
-rw-r--r--drivers/net/tulip/tulip_core.c7
-rw-r--r--drivers/net/usb/Kconfig2
-rw-r--r--drivers/net/usb/dm9601.c2
-rw-r--r--drivers/net/usb/pegasus.c4
-rw-r--r--drivers/net/wan/lapbether.c2
-rw-r--r--drivers/net/wireless/b43/dma.c7
-rw-r--r--drivers/net/wireless/b43/pcmcia.c6
-rw-r--r--drivers/net/wireless/libertas/if_cs.c2
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00dev.c13
-rw-r--r--include/linux/netdevice.h6
-rw-r--r--include/net/llc.h1
-rw-r--r--include/net/llc_pdu.h4
-rw-r--r--include/net/llc_sap.h7
-rw-r--r--net/8021q/vlan.c20
-rw-r--r--net/8021q/vlan.h5
-rw-r--r--net/8021q/vlanproc.c5
-rw-r--r--net/bluetooth/af_bluetooth.c40
-rw-r--r--net/bluetooth/hci_sock.c2
-rw-r--r--net/bluetooth/l2cap.c2
-rw-r--r--net/bluetooth/rfcomm/core.c2
-rw-r--r--net/bluetooth/rfcomm/sock.c2
-rw-r--r--net/bluetooth/rfcomm/tty.c5
-rw-r--r--net/bluetooth/sco.c2
-rw-r--r--net/ipv4/inet_fragment.c3
-rw-r--r--net/ipv4/ip_forward.c2
-rw-r--r--net/ipv4/udp.c4
-rw-r--r--net/ipv6/addrconf.c19
-rw-r--r--net/ipv6/icmp.c4
-rw-r--r--net/ipv6/ip6_input.c3
-rw-r--r--net/ipv6/netfilter/nf_conntrack_reasm.c2
-rw-r--r--net/llc/af_llc.c3
-rw-r--r--net/llc/llc_c_ac.c47
-rw-r--r--net/llc/llc_core.c9
-rw-r--r--net/llc/llc_input.c6
-rw-r--r--net/llc/llc_pdu.c2
-rw-r--r--net/llc/llc_s_ac.c9
-rw-r--r--net/llc/llc_sap.c27
-rw-r--r--net/llc/llc_station.c19
-rw-r--r--net/mac80211/ieee80211.c12
-rw-r--r--net/mac80211/ieee80211_sta.c9
-rw-r--r--net/rose/af_rose.c9
-rw-r--r--net/sched/sch_generic.c18
55 files changed, 286 insertions, 687 deletions
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
index 02e56d447a8f..c485ee028bd9 100644
--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@@ -84,9 +84,6 @@ policy-routing.txt
- IP policy-based routing
ray_cs.txt
- Raylink Wireless LAN card driver info.
-sk98lin.txt
- - Marvell Yukon Chipset / SysKonnect SK-98xx compliant Gigabit
- Ethernet Adapter family driver info
skfp.txt
- SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info.
smc9.txt
diff --git a/Documentation/networking/sk98lin.txt b/Documentation/networking/sk98lin.txt
deleted file mode 100644
index 8590a954df1d..000000000000
--- a/Documentation/networking/sk98lin.txt
+++ /dev/null
@@ -1,568 +0,0 @@
-(C)Copyright 1999-2004 Marvell(R).
-All rights reserved
-===========================================================================
-
-sk98lin.txt created 13-Feb-2004
-
-Readme File for sk98lin v6.23
-Marvell Yukon/SysKonnect SK-98xx Gigabit Ethernet Adapter family driver for LINUX
-
-This file contains
- 1 Overview
- 2 Required Files
- 3 Installation
- 3.1 Driver Installation
- 3.2 Inclusion of adapter at system start
- 4 Driver Parameters
- 4.1 Per-Port Parameters
- 4.2 Adapter Parameters
- 5 Large Frame Support
- 6 VLAN and Link Aggregation Support (IEEE 802.1, 802.1q, 802.3ad)
- 7 Troubleshooting
-
-===========================================================================
-
-
-1 Overview
-===========
-
-The sk98lin driver supports the Marvell Yukon and SysKonnect
-SK-98xx/SK-95xx compliant Gigabit Ethernet Adapter on Linux. It has
-been tested with Linux on Intel/x86 machines.
-***
-
-
-2 Required Files
-=================
-
-The linux kernel source.
-No additional files required.
-***
-
-
-3 Installation
-===============
-
-It is recommended to download the latest version of the driver from the
-SysKonnect web site www.syskonnect.com. If you have downloaded the latest
-driver, the Linux kernel has to be patched before the driver can be
-installed. For details on how to patch a Linux kernel, refer to the
-patch.txt file.
-
-3.1 Driver Installation
-------------------------
-
-The following steps describe the actions that are required to install
-the driver and to start it manually. These steps should be carried
-out for the initial driver setup. Once confirmed to be ok, they can
-be included in the system start.
-
-NOTE 1: To perform the following tasks you need 'root' access.
-
-NOTE 2: In case of problems, please read the section "Troubleshooting"
- below.
-
-The driver can either be integrated into the kernel or it can be compiled
-as a module. Select the appropriate option during the kernel
-configuration.
-
-Compile/use the driver as a module
-----------------------------------
-To compile the driver, go to the directory /usr/src/linux and
-execute the command "make menuconfig" or "make xconfig" and proceed as
-follows:
-
-To integrate the driver permanently into the kernel, proceed as follows:
-
-1. Select the menu "Network device support" and then "Ethernet(1000Mbit)"
-2. Mark "Marvell Yukon Chipset / SysKonnect SK-98xx family support"
- with (*)
-3. Build a new kernel when the configuration of the above options is
- finished.
-4. Install the new kernel.
-5. Reboot your system.
-
-To use the driver as a module, proceed as follows:
-
-1. Enable 'loadable module support' in the kernel.
-2. For automatic driver start, enable the 'Kernel module loader'.
-3. Select the menu "Network device support" and then "Ethernet(1000Mbit)"
-4. Mark "Marvell Yukon Chipset / SysKonnect SK-98xx family support"
- with (M)
-5. Execute the command "make modules".
-6. Execute the command "make modules_install".
- The appropriate modules will be installed.
-7. Reboot your system.
-
-
-Load the module manually
-------------------------
-To load the module manually, proceed as follows:
-
-1. Enter "modprobe sk98lin".
-2. If a Marvell Yukon or SysKonnect SK-98xx adapter is installed in
- your computer and you have a /proc file system, execute the command:
- "ls /proc/net/sk98lin/"
- This should produce an output containing a line with the following
- format:
- eth0 eth1 ...
- which indicates that your adapter has been found and initialized.
-
- NOTE 1: If you have more than one Marvell Yukon or SysKonnect SK-98xx
- adapter installed, the adapters will be listed as 'eth0',
- 'eth1', 'eth2', etc.
- For each adapter, repeat steps 3 and 4 below.
-
- NOTE 2: If you have other Ethernet adapters installed, your Marvell
- Yukon or SysKonnect SK-98xx adapter will be mapped to the
- next available number, e.g. 'eth1'. The mapping is executed
- automatically.
- The module installation message (displayed either in a system
- log file or on the console) prints a line for each adapter
- found containing the corresponding 'ethX'.
-
-3. Select an IP address and assign it to the respective adapter by
- entering:
- ifconfig eth0 <ip-address>
- With this command, the adapter is connected to the Ethernet.
-
- SK-98xx Gigabit Ethernet Server Adapters: The yellow LED on the adapter
- is now active, the link status LED of the primary port is active and
- the link status LED of the secondary port (on dual port adapters) is
- blinking (if the ports are connected to a switch or hub).
- SK-98xx V2.0 Gigabit Ethernet Adapters: The link status LED is active.
- In addition, you will receive a status message on the console stating
- "ethX: network connection up using port Y" and showing the selected
- connection parameters (x stands for the ethernet device number
- (0,1,2, etc), y stands for the port name (A or B)).
-
- NOTE: If you are in doubt about IP addresses, ask your network
- administrator for assistance.
-
-4. Your adapter should now be fully operational.
- Use 'ping <otherstation>' to verify the connection to other computers
- on your network.
-5. To check the adapter configuration view /proc/net/sk98lin/[devicename].
- For example by executing:
- "cat /proc/net/sk98lin/eth0"
-
-Unload the module
------------------
-To stop and unload the driver modules, proceed as follows:
-
-1. Execute the command "ifconfig eth0 down".
-2. Execute the command "rmmod sk98lin".
-
-3.2 Inclusion of adapter at system start
------------------------------------------
-
-Since a large number of different Linux distributions are
-available, we are unable to describe a general installation procedure
-for the driver module.
-Because the driver is now integrated in the kernel, installation should
-be easy, using the standard mechanism of your distribution.
-Refer to the distribution's manual for installation of ethernet adapters.
-
-***
-
-4 Driver Parameters
-====================
-
-Parameters can be set at the command line after the module has been
-loaded with the command 'modprobe'.
-In some distributions, the configuration tools are able to pass parameters
-to the driver module.
-
-If you use the kernel module loader, you can set driver parameters
-in the file /etc/modprobe.conf (or /etc/modules.conf in 2.4 or earlier).
-To set the driver parameters in this file, proceed as follows:
-
-1. Insert a line of the form :
- options sk98lin ...
- For "...", the same syntax is required as described for the command
- line parameters of modprobe below.
-2. To activate the new parameters, either reboot your computer
- or
- unload and reload the driver.
- The syntax of the driver parameters is:
-
- modprobe sk98lin parameter=value1[,value2[,value3...]]
-
- where value1 refers to the first adapter, value2 to the second etc.
-
-NOTE: All parameters are case sensitive. Write them exactly as shown
- below.
-
-Example:
-Suppose you have two adapters. You want to set auto-negotiation
-on the first adapter to ON and on the second adapter to OFF.
-You also want to set DuplexCapabilities on the first adapter
-to FULL, and on the second adapter to HALF.
-Then, you must enter:
-
- modprobe sk98lin AutoNeg_A=On,Off DupCap_A=Full,Half
-
-NOTE: The number of adapters that can be configured this way is
- limited in the driver (file skge.c, constant SK_MAX_CARD_PARAM).
- The current limit is 16. If you happen to install
- more adapters, adjust this and recompile.
-
-
-4.1 Per-Port Parameters
-------------------------
-
-These settings are available for each port on the adapter.
-In the following description, '?' stands for the port for
-which you set the parameter (A or B).
-
-Speed
------
-Parameter: Speed_?
-Values: 10, 100, 1000, Auto
-Default: Auto
-
-This parameter is used to set the speed capabilities. It is only valid
-for the SK-98xx V2.0 copper adapters.
-Usually, the speed is negotiated between the two ports during link
-establishment. If this fails, a port can be forced to a specific setting
-with this parameter.
-
-Auto-Negotiation
-----------------
-Parameter: AutoNeg_?
-Values: On, Off, Sense
-Default: On
-
-The "Sense"-mode automatically detects whether the link partner supports
-auto-negotiation or not.
-
-Duplex Capabilities
--------------------
-Parameter: DupCap_?
-Values: Half, Full, Both
-Default: Both
-
-This parameters is only relevant if auto-negotiation for this port is
-not set to "Sense". If auto-negotiation is set to "On", all three values
-are possible. If it is set to "Off", only "Full" and "Half" are allowed.
-This parameter is useful if your link partner does not support all
-possible combinations.
-
-Flow Control
-------------
-Parameter: FlowCtrl_?
-Values: Sym, SymOrRem, LocSend, None
-Default: SymOrRem
-
-This parameter can be used to set the flow control capabilities the
-port reports during auto-negotiation. It can be set for each port
-individually.
-Possible modes:
- -- Sym = Symmetric: both link partners are allowed to send
- PAUSE frames
- -- SymOrRem = SymmetricOrRemote: both or only remote partner
- are allowed to send PAUSE frames
- -- LocSend = LocalSend: only local link partner is allowed
- to send PAUSE frames
- -- None = no link partner is allowed to send PAUSE frames
-
-NOTE: This parameter is ignored if auto-negotiation is set to "Off".
-
-Role in Master-Slave-Negotiation (1000Base-T only)
---------------------------------------------------
-Parameter: Role_?
-Values: Auto, Master, Slave
-Default: Auto
-
-This parameter is only valid for the SK-9821 and SK-9822 adapters.
-For two 1000Base-T ports to communicate, one must take the role of the
-master (providing timing information), while the other must be the
-slave. Usually, this is negotiated between the two ports during link
-establishment. If this fails, a port can be forced to a specific setting
-with this parameter.
-
-
-4.2 Adapter Parameters
------------------------
-
-Connection Type (SK-98xx V2.0 copper adapters only)
----------------
-Parameter: ConType
-Values: Auto, 100FD, 100HD, 10FD, 10HD
-Default: Auto
-
-The parameter 'ConType' is a combination of all five per-port parameters
-within one single parameter. This simplifies the configuration of both ports
-of an adapter card! The different values of this variable reflect the most
-meaningful combinations of port parameters.
-
-The following table shows the values of 'ConType' and the corresponding
-combinations of the per-port parameters:
-
- ConType | DupCap AutoNeg FlowCtrl Role Speed
- ----------+------------------------------------------------------
- Auto | Both On SymOrRem Auto Auto
- 100FD | Full Off None Auto (ignored) 100
- 100HD | Half Off None Auto (ignored) 100
- 10FD | Full Off None Auto (ignored) 10
- 10HD | Half Off None Auto (ignored) 10
-
-Stating any other port parameter together with this 'ConType' variable
-will result in a merged configuration of those settings. This due to
-the fact, that the per-port parameters (e.g. Speed_? ) have a higher
-priority than the combined variable 'ConType'.
-
-NOTE: This parameter is always used on both ports of the adapter card.
-
-Interrupt Moderation
---------------------
-Parameter: Moderation
-Values: None, Static, Dynamic
-Default: None
-
-Interrupt moderation is employed to limit the maximum number of interrupts
-the driver has to serve. That is, one or more interrupts (which indicate any
-transmit or receive packet to be processed) are queued until the driver
-processes them. When queued interrupts are to be served, is determined by the
-'IntsPerSec' parameter, which is explained later below.
-
-Possible modes:
-
- -- None - No interrupt moderation is applied on the adapter card.
- Therefore, each transmit or receive interrupt is served immediately
- as soon as it appears on the interrupt line of the adapter card.
-
- -- Static - Interrupt moderation is applied on the adapter card.
- All transmit and receive interrupts are queued until a complete
- moderation interval ends. If such a moderation interval ends, all
- queued interrupts are processed in one big bunch without any delay.
- The term 'static' reflects the fact, that interrupt moderation is
- always enabled, regardless how much network load is currently
- passing via a particular interface. In addition, the duration of
- the moderation interval has a fixed length that never changes while
- the driver is operational.
-
- -- Dynamic - Interrupt moderation might be applied on the adapter card,
- depending on the load of the system. If the driver detects that the
- system load is too high, the driver tries to shield the system against
- too much network load by enabling interrupt moderation. If - at a later
- time - the CPU utilization decreases again (or if the network load is
- negligible) the interrupt moderation will automatically be disabled.
-
-Interrupt moderation should be used when the driver has to handle one or more
-interfaces with a high network load, which - as a consequence - leads also to a
-high CPU utilization. When moderation is applied in such high network load
-situations, CPU load might be reduced by 20-30%.
-
-NOTE: The drawback of using interrupt moderation is an increase of the round-
-trip-time (RTT), due to the queueing and serving of interrupts at dedicated
-moderation times.
-
-Interrupts per second
----------------------
-Parameter: IntsPerSec
-Values: 30...40000 (interrupts per second)
-Default: 2000
-
-This parameter is only used if either static or dynamic interrupt moderation
-is used on a network adapter card. Using this parameter if no moderation is
-applied will lead to no action performed.
-
-This parameter determines the length of any interrupt moderation interval.
-Assuming that static interrupt moderation is to be used, an 'IntsPerSec'
-parameter value of 2000 will lead to an interrupt moderation interval of
-500 microseconds.
-
-NOTE: The duration of the moderation interval is to be chosen with care.
-At first glance, selecting a very long duration (e.g. only 100 interrupts per
-second) seems to be meaningful, but the increase of packet-processing delay
-is tremendous. On the other hand, selecting a very short moderation time might
-compensate the use of any moderation being applied.
-
-
-Preferred Port
---------------
-Parameter: PrefPort
-Values: A, B
-Default: A
-
-This is used to force the preferred port to A or B (on dual-port network
-adapters). The preferred port is the one that is used if both are detected
-as fully functional.
-
-RLMT Mode (Redundant Link Management Technology)
-------------------------------------------------
-Parameter: RlmtMode
-Values: CheckLinkState,CheckLocalPort, CheckSeg, DualNet
-Default: CheckLinkState
-
-RLMT monitors the status of the port. If the link of the active port
-fails, RLMT switches immediately to the standby link. The virtual link is
-maintained as long as at least one 'physical' link is up.
-
-Possible modes:
-
- -- CheckLinkState - Check link state only: RLMT uses the link state
- reported by the adapter hardware for each individual port to
- determine whether a port can be used for all network traffic or
- not.
-
- -- CheckLocalPort - In this mode, RLMT monitors the network path
- between the two ports of an adapter by regularly exchanging packets
- between them. This mode requires a network configuration in which
- the two ports are able to "see" each other (i.e. there must not be
- any router between the ports).
-
- -- CheckSeg - Check local port and segmentation: This mode supports the
- same functions as the CheckLocalPort mode and additionally checks
- network segmentation between the ports. Therefore, this mode is only
- to be used if Gigabit Ethernet switches are installed on the network
- that have been configured to use the Spanning Tree protocol.
-
- -- DualNet - In this mode, ports A and B are used as separate devices.
- If you have a dual port adapter, port A will be configured as eth0
- and port B as eth1. Both ports can be used independently with
- distinct IP addresses. The preferred port setting is not used.
- RLMT is turned off.
-
-NOTE: RLMT modes CLP and CLPSS are designed to operate in configurations
- where a network path between the ports on one adapter exists.
- Moreover, they are not designed to work where adapters are connected
- back-to-back.
-***
-
-
-5 Large Frame Support
-======================
-
-The driver supports large frames (also called jumbo frames). Using large
-frames can result in an improved throughput if transferring large amounts
-of data.
-To enable large frames, set the MTU (maximum transfer unit) of the
-interface to the desired value (up to 9000), execute the following
-command:
- ifconfig eth0 mtu 9000
-This will only work if you have two adapters connected back-to-back
-or if you use a switch that supports large frames. When using a switch,
-it should be configured to allow large frames and auto-negotiation should
-be set to OFF. The setting must be configured on all adapters that can be
-reached by the large frames. If one adapter is not set to receive large
-frames, it will simply drop them.
-
-You can switch back to the standard ethernet frame size by executing the
-following command:
- ifconfig eth0 mtu 1500
-
-To permanently configure this setting, add a script with the 'ifconfig'
-line to the system startup sequence (named something like "S99sk98lin"
-in /etc/rc.d/rc2.d).
-***
-
-
-6 VLAN and Link Aggregation Support (IEEE 802.1, 802.1q, 802.3ad)
-==================================================================
-
-The Marvell Yukon/SysKonnect Linux drivers are able to support VLAN and
-Link Aggregation according to IEEE standards 802.1, 802.1q, and 802.3ad.
-These features are only available after installation of open source
-modules available on the Internet:
-For VLAN go to: http://www.candelatech.com/~greear/vlan.html
-For Link Aggregation go to: http://www.st.rim.or.jp/~yumo
-
-NOTE: SysKonnect GmbH does not offer any support for these open source
- modules and does not take the responsibility for any kind of
- failures or problems arising in connection with these modules.
-
-NOTE: Configuring Link Aggregation on a SysKonnect dual link adapter may
- cause problems when unloading the driver.
-
-
-7 Troubleshooting
-==================
-
-If any problems occur during the installation process, check the
-following list:
-
-
-Problem: The SK-98xx adapter cannot be found by the driver.
-Solution: In /proc/pci search for the following entry:
- 'Ethernet controller: SysKonnect SK-98xx ...'
- If this entry exists, the SK-98xx or SK-98xx V2.0 adapter has
- been found by the system and should be operational.
- If this entry does not exist or if the file '/proc/pci' is not
- found, there may be a hardware problem or the PCI support may
- not be enabled in your kernel.
- The adapter can be checked using the diagnostics program which
- is available on the SysKonnect web site:
- www.syskonnect.com
-
- Some COMPAQ machines have problems dealing with PCI under Linux.
- This problem is described in the 'PCI howto' document
- (included in some distributions or available from the
- web, e.g. at 'www.linux.org').
-
-
-Problem: Programs such as 'ifconfig' or 'route' cannot be found or the
- error message 'Operation not permitted' is displayed.
-Reason: You are not logged in as user 'root'.
-Solution: Logout and login as 'root' or change to 'root' via 'su'.
-
-
-Problem: Upon use of the command 'ping <address>' the message
- "ping: sendto: Network is unreachable" is displayed.
-Reason: Your route is not set correctly.
-Solution: If you are using RedHat, you probably forgot to set up the
- route in the 'network configuration'.
- Check the existing routes with the 'route' command and check
- if an entry for 'eth0' exists, and if so, if it is set correctly.
-
-
-Problem: The driver can be started, the adapter is connected to the
- network, but you cannot receive or transmit any packets;
- e.g. 'ping' does not work.
-Reason: There is an incorrect route in your routing table.
-Solution: Check the routing table with the command 'route' and read the
- manual help pages dealing with routes (enter 'man route').
-
-NOTE: Although the 2.2.x kernel versions generate the routing entry
- automatically, problems of this kind may occur here as well. We've
- come across a situation in which the driver started correctly at
- system start, but after the driver has been removed and reloaded,
- the route of the adapter's network pointed to the 'dummy0'device
- and had to be corrected manually.
-
-
-Problem: Your computer should act as a router between multiple
- IP subnetworks (using multiple adapters), but computers in
- other subnetworks cannot be reached.
-Reason: Either the router's kernel is not configured for IP forwarding
- or the routing table and gateway configuration of at least one
- computer is not working.
-
-Problem: Upon driver start, the following error message is displayed:
- "eth0: -- ERROR --
- Class: internal Software error
- Nr: 0xcc
- Msg: SkGeInitPort() cannot init running ports"
-Reason: You are using a driver compiled for single processor machines
- on a multiprocessor machine with SMP (Symmetric MultiProcessor)
- kernel.
-Solution: Configure your kernel appropriately and recompile the kernel or
- the modules.
-
-
-
-If your problem is not listed here, please contact SysKonnect's technical
-support for help (linux@syskonnect.de).
-When contacting our technical support, please ensure that the following
-information is available:
-- System Manufacturer and HW Informations (CPU, Memory... )
-- PCI-Boards in your system
-- Distribution
-- Kernel version
-- Driver version
-***
-
-
-
-***End of Readme File***
diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c
index 47c57a4294b7..98099f526d82 100644
--- a/drivers/atm/firestream.c
+++ b/drivers/atm/firestream.c
@@ -978,6 +978,7 @@ static int fs_open(struct atm_vcc *atm_vcc)
/* Docs are vague about this atm_hdr field. By the way, the FS
* chip makes odd errors if lower bits are set.... -- REW */
tc->atm_hdr = (vpi << 20) | (vci << 4);
+ tmc0 = 0;
{
int pcr = atm_pcr_goal (txtp);
diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index 2e3395b7e8c1..ffc4a5a41946 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -3000,8 +3000,7 @@ he_proc_read(struct atm_dev *dev, loff_t *pos, char *page)
/* eeprom routines -- see 4.7 */
-u8
-read_prom_byte(struct he_dev *he_dev, int addr)
+static u8 read_prom_byte(struct he_dev *he_dev, int addr)
{
u32 val = 0, tmp_read = 0;
int i, j = 0;
diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c
index b967919fb7e2..28d77b5195de 100644
--- a/drivers/atm/idt77252.c
+++ b/drivers/atm/idt77252.c
@@ -2016,8 +2016,7 @@ idt77252_send_skb(struct atm_vcc *vcc, struct sk_buff *skb, int oam)
return 0;
}
-int
-idt77252_send(struct atm_vcc *vcc, struct sk_buff *skb)
+static int idt77252_send(struct atm_vcc *vcc, struct sk_buff *skb)
{
return idt77252_send_skb(vcc, skb, 0);
}
@@ -3072,8 +3071,7 @@ idt77252_dev_open(struct idt77252_dev *card)
return 0;
}
-void
-idt77252_dev_close(struct atm_dev *dev)
+static void idt77252_dev_close(struct atm_dev *dev)
{
struct idt77252_dev *card = dev->dev_data;
u32 conf;
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index ef52452640e0..670c093ed25f 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -958,6 +958,7 @@ static void ia_suni_pm7345_init (IADEV *iadev)
/***************************** IA_LIB END *****************************/
+#ifdef CONFIG_ATM_IA_DEBUG
static int tcnter = 0;
static void xdump( u_char* cp, int length, char* prefix )
{
@@ -992,6 +993,7 @@ static void xdump( u_char* cp, int length, char* prefix )
}
} /* close xdump(... */
+#endif /* CONFIG_ATM_IA_DEBUG */
static struct atm_dev *ia_boards = NULL;
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 95d1b61342ec..da30a31e66f9 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2555,7 +2555,7 @@ config NIU
config PASEMI_MAC
tristate "PA Semi 1/10Gbit MAC"
- depends on PPC64 && PCI
+ depends on PPC_PASEMI && PCI
select PHYLIB
select INET_LRO
help
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index c993a32b3f50..26b2dd5016cd 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -575,7 +575,6 @@ adjust_head:
static int bf537mac_hard_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
- struct bf537mac_local *lp = netdev_priv(dev);
unsigned int data;
current_tx_ptr->skb = skb;
@@ -634,7 +633,6 @@ out:
static void bf537mac_rx(struct net_device *dev)
{
struct sk_buff *skb, *new_skb;
- struct bf537mac_local *lp = netdev_priv(dev);
unsigned short len;
/* allocate a new skb for next time receive */
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 90a1f31e8e63..979c2d05ff9c 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -341,6 +341,7 @@ static ssize_t bonding_store_slaves(struct device *d,
if (command[0] == '-') {
dev = NULL;
+ original_mtu = 0;
bond_for_each_slave(bond, slave, i)
if (strnicmp(slave->dev->name, ifname, IFNAMSIZ) == 0) {
dev = slave->dev;
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 0272afbdff37..4708a1631925 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -1854,6 +1854,7 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev)
struct ring_desc* start_tx;
struct ring_desc* prev_tx;
struct nv_skb_map* prev_tx_ctx;
+ unsigned long flags;
/* add fragments to entries count */
for (i = 0; i < fragments; i++) {
@@ -1863,10 +1864,10 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev)
empty_slots = nv_get_empty_tx_slots(np);
if (unlikely(empty_slots <= entries)) {
- spin_lock_irq(&np->lock);
+ spin_lock_irqsave(&np->lock, flags);
netif_stop_queue(dev);
np->tx_stop = 1;
- spin_unlock_irq(&np->lock);
+ spin_unlock_irqrestore(&np->lock, flags);
return NETDEV_TX_BUSY;
}
@@ -1929,13 +1930,13 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev)
tx_flags_extra = skb->ip_summed == CHECKSUM_PARTIAL ?
NV_TX2_CHECKSUM_L3 | NV_TX2_CHECKSUM_L4 : 0;
- spin_lock_irq(&np->lock);
+ spin_lock_irqsave(&np->lock, flags);
/* set tx flags */
start_tx->flaglen |= cpu_to_le32(tx_flags | tx_flags_extra);
np->put_tx.orig = put_tx;
- spin_unlock_irq(&np->lock);
+ spin_unlock_irqrestore(&np->lock, flags);
dprintk(KERN_DEBUG "%s: nv_start_xmit: entries %d queued for transmission. tx_flags_extra: %x\n",
dev->name, entries, tx_flags_extra);
@@ -1971,6 +1972,7 @@ static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev)
struct ring_desc_ex* prev_tx;
struct nv_skb_map* prev_tx_ctx;
struct nv_skb_map* start_tx_ctx;
+ unsigned long flags;
/* add fragments to entries count */
for (i = 0; i < fragments; i++) {
@@ -1980,10 +1982,10 @@ static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev)
empty_slots = nv_get_empty_tx_slots(np);
if (unlikely(empty_slots <= entries)) {
- spin_lock_irq(&np->lock);
+ spin_lock_irqsave(&np->lock, flags);
netif_stop_queue(dev);
np->tx_stop = 1;
- spin_unlock_irq(&np->lock);
+ spin_unlock_irqrestore(&np->lock, flags);
return NETDEV_TX_BUSY;
}
@@ -2059,7 +2061,7 @@ static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev)
start_tx->txvlan = 0;
}
- spin_lock_irq(&np->lock);
+ spin_lock_irqsave(&np->lock, flags);
if (np->tx_limit) {
/* Limit the number of outstanding tx. Setup all fragments, but
@@ -2085,7 +2087,7 @@ static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev)
start_tx->flaglen |= cpu_to_le32(tx_flags | tx_flags_extra);
np->put_tx.ex = put_tx;
- spin_unlock_irq(&np->lock);
+ spin_unlock_irqrestore(&np->lock, flags);
dprintk(KERN_DEBUG "%s: nv_start_xmit_optimized: entries %d queued for transmission. tx_flags_extra: %x\n",
dev->name, entries, tx_flags_extra);
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 0789802d59ed..378a23963495 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -1242,8 +1242,8 @@ static int emac_close(struct net_device *ndev)
static inline u16 emac_tx_csum(struct emac_instance *dev,
struct sk_buff *skb)
{
- if (emac_has_feature(dev, EMAC_FTR_HAS_TAH &&
- skb->ip_summed == CHECKSUM_PARTIAL)) {
+ if (emac_has_feature(dev, EMAC_FTR_HAS_TAH) &&
+ (skb->ip_summed == CHECKSUM_PARTIAL)) {
++dev->stats.tx_packets_csum;
return EMAC_TX_CTRL_TAH_CSUM;
}
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 268a288e0457..dcbe01b0ca0d 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -86,7 +86,7 @@
#include "s2io.h"
#include "s2io-regs.h"
-#define DRV_VERSION "2.0.26.19"
+#define DRV_VERSION "2.0.26.20"
/* S2io Driver name & version. */
static char s2io_driver_name[] = "Neterion";
diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
index 206918bad539..da2206f6021d 100644
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/tulip/eeprom.c
@@ -343,6 +343,12 @@ int __devinit tulip_read_eeprom(struct net_device *dev, int location, int addr_l
void __iomem *ee_addr = tp->base_addr + CSR9;
int read_cmd = location | (EE_READ_CMD << addr_len);
+ /* If location is past the end of what we can address, don't
+ * read some other location (ie truncate). Just return zero.
+ */
+ if (location > (1 << addr_len) - 1)
+ return 0;
+
iowrite32(EE_ENB & ~EE_CS, ee_addr);
iowrite32(EE_ENB, ee_addr);
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index ed600bf56e78..82f404b76d81 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -1437,6 +1437,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
EEPROM.
*/
ee_data = tp->eeprom;
+ memset(ee_data, 0, sizeof(tp->eeprom));
sum = 0;
if (chip_idx == LC82C168) {
for (i = 0; i < 3; i++) {
@@ -1458,8 +1459,12 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
/* A serial EEPROM interface, we read now and sort it out later. */
int sa_offset = 0;
int ee_addr_size = tulip_read_eeprom(dev, 0xff, 8) & 0x40000 ? 8 : 6;
+ int ee_max_addr = ((1 << ee_addr_size) - 1) * sizeof(u16);
- for (i = 0; i < sizeof(tp->eeprom); i+=2) {
+ if (ee_max_addr > sizeof(tp->eeprom))
+ ee_max_addr = sizeof(tp->eeprom);
+
+ for (i = 0; i < ee_max_addr ; i += sizeof(u16)) {
u16 data = tulip_read_eeprom(dev, i/2, ee_addr_size);
ee_data[i] = data & 0xff;
ee_data[i + 1] = data >> 8;
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index a12c9c41b217..0604f3faf043 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -129,7 +129,7 @@ config USB_USBNET
config USB_NET_AX8817X
tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
- depends on USB_USBNET && NET_ETHERNET
+ depends on USB_USBNET
select CRC32
default y
help
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index 2968bb342ea3..f7319d326912 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -354,7 +354,7 @@ static void dm9601_set_multicast(struct net_device *net)
struct dev_mc_list *mc_list = net->mc_list;
int i;
- for (i = 0; i < net->mc_count; i++) {
+ for (i = 0; i < net->mc_count; i++, mc_list = mc_list->next) {
u32 crc = ether_crc(ETH_ALEN, mc_list->dmi_addr) >> 26;
hashes[crc >> 3] |= 1 << (crc & 0x7);
}
diff --git a/drivers/net/usb/pegasus.c b/drivers/net/usb/pegasus.c
index d1ed68a11e70..b588c890ea70 100644
--- a/drivers/net/usb/pegasus.c
+++ b/drivers/net/usb/pegasus.c
@@ -1128,12 +1128,8 @@ pegasus_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
{
pegasus_t *pegasus;
- if (in_atomic())
- return 0;
-
pegasus = netdev_priv(dev);
mii_ethtool_gset(&pegasus->mii, ecmd);
-
return 0;
}
diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index 629c909e05f9..b5860b97a93e 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -58,7 +58,7 @@ struct lapbethdev {
struct net_device_stats stats; /* some statistics */
};
-static struct list_head lapbeth_devices = LIST_HEAD_INIT(lapbeth_devices);
+static LIST_HEAD(lapbeth_devices);
/* ------------------------------------------------------------------------ */
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index 8a9776b52daf..70db0570adc5 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -574,6 +574,7 @@ static int setup_rx_descbuffer(struct b43_dmaring *ring,
}
if (b43_dma_mapping_error(ring, dmaaddr, ring->rx_buffersize, 0)) {
+ b43err(ring->dev->wl, "RX DMA buffer allocation failed\n");
dev_kfree_skb_any(skb);
return -EIO;
}
@@ -829,8 +830,12 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev,
DMA_TO_DEVICE);
if (b43_dma_mapping_error(ring, dma_test,
- b43_txhdr_size(dev), 1))
+ b43_txhdr_size(dev), 1)) {
+
+ b43err(dev->wl,
+ "TXHDR DMA allocation failed\n");
goto err_kfree_txhdr_cache;
+ }
}
dma_unmap_single(dev->dev->dev,
diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c
index b79a6bd5396d..371e4a119511 100644
--- a/drivers/net/wireless/b43/pcmcia.c
+++ b/drivers/net/wireless/b43/pcmcia.c
@@ -91,6 +91,8 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
dev->conf.ConfigBase = parse.config.base;
dev->conf.Present = parse.config.rmask[0];
+ dev->conf.Attributes = CONF_ENABLE_IRQ;
+ dev->conf.IntType = INT_MEMORY_AND_IO;
dev->io.BasePort2 = 0;
dev->io.NumPorts2 = 0;
@@ -112,8 +114,8 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev)
if (res != CS_SUCCESS)
goto err_disable;
- dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_FIRST_SHARED;
- dev->irq.IRQInfo1 = IRQ_LEVEL_ID | IRQ_SHARE_ID;
+ dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
+ dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
dev->irq.Handler = NULL; /* The handler is registered later. */
dev->irq.Instance = NULL;
res = pcmcia_request_irq(dev, &dev->irq);
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index d17746582160..53afebac7146 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -677,9 +677,7 @@ sbi_get_int_status_exit:
/* Card has a command result for us */
if (*ireg & IF_CS_C_S_CMD_UPLD_RDY) {
- spin_lock(&priv->driver_lock);
ret = if_cs_receive_cmdres(priv, priv->upld_buf, &priv->upld_len);
- spin_unlock(&priv->driver_lock);
if (ret < 0)
lbs_pr_err("could not receive cmd from card\n");
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 62b58a6261fe..50ea7bd0c922 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -1252,11 +1252,20 @@ int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state)
exit:
/*
- * Set device mode to sleep for power management.
+ * Set device mode to sleep for power management,
+ * on some hardware this call seems to consistently fail.
+ * From the specifications it is hard to tell why it fails,
+ * and if this is a "bad thing".
+ * Overall it is safe to just ignore the failure and
+ * continue suspending. The only downside is that the
+ * device will not be in optimal power save mode, but with
+ * the radio and the other components already disabled the
+ * device is as good as disabled.
*/
retval = rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP);
if (retval)
- return retval;
+ WARNING(rt2x00dev, "Device failed to enter sleep state, "
+ "continue suspending.\n");
return 0;
}
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 993758f924be..c36c76caf20b 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1105,12 +1105,14 @@ static inline int netif_is_multiqueue(const struct net_device *dev)
}
/* Use this variant when it is known for sure that it
- * is executing from interrupt context.
+ * is executing from hardware interrupt context or with hardware interrupts
+ * disabled.
*/
extern void dev_kfree_skb_irq(struct sk_buff *skb);
/* Use this variant in places where it could be invoked
- * either from interrupt or non-interrupt context.
+ * from either hardware interrupt or other context, with hardware interrupts
+ * either disabled or enabled.
*/
extern void dev_kfree_skb_any(struct sk_buff *skb);
diff --git a/include/net/llc.h b/include/net/llc.h
index f5024583fc8b..7940da1606e7 100644
--- a/include/net/llc.h
+++ b/include/net/llc.h
@@ -65,7 +65,6 @@ struct llc_sap {
extern struct list_head llc_sap_list;
extern rwlock_t llc_sap_list_lock;
-extern unsigned char llc_station_mac_sa[ETH_ALEN];
extern int llc_rcv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *pt, struct net_device *orig_dev);
diff --git a/include/net/llc_pdu.h b/include/net/llc_pdu.h
index 4a8f58b17e43..75b8e2968c9b 100644
--- a/include/net/llc_pdu.h
+++ b/include/net/llc_pdu.h
@@ -381,7 +381,7 @@ static inline void llc_pdu_init_as_xid_cmd(struct sk_buff *skb,
xid_info->fmt_id = LLC_XID_FMT_ID; /* 0x81 */
xid_info->type = svcs_supported;
xid_info->rw = rx_window << 1; /* size of receive window */
- skb_put(skb, 3);
+ skb_put(skb, sizeof(struct llc_xid_info));
}
/**
@@ -406,7 +406,7 @@ static inline void llc_pdu_init_as_xid_rsp(struct sk_buff *skb,
xid_info->fmt_id = LLC_XID_FMT_ID;
xid_info->type = svcs_supported;
xid_info->rw = rx_window << 1;
- skb_put(skb, 3);
+ skb_put(skb, sizeof(struct llc_xid_info));
}
/* LLC Type 2 FRMR response information field format */
diff --git a/include/net/llc_sap.h b/include/net/llc_sap.h
index 2c56dbece729..ed25bec2f648 100644
--- a/include/net/llc_sap.h
+++ b/include/net/llc_sap.h
@@ -1,5 +1,8 @@
#ifndef LLC_SAP_H
#define LLC_SAP_H
+
+#include <asm/types.h>
+
/*
* Copyright (c) 1997 by Procom Technology,Inc.
* 2001-2003 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
@@ -19,8 +22,8 @@ struct sock;
extern void llc_sap_rtn_pdu(struct llc_sap *sap, struct sk_buff *skb);
extern void llc_save_primitive(struct sock *sk, struct sk_buff* skb,
unsigned char prim);
-extern struct sk_buff *llc_alloc_frame(struct sock *sk,
- struct net_device *dev);
+extern struct sk_buff *llc_alloc_frame(struct sock *sk, struct net_device *dev,
+ u8 type, u32 data_size);
extern void llc_build_and_send_test_pkt(struct llc_sap *sap,
struct sk_buff *skb,
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index 694be86e4490..5975ec3be7f3 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -384,17 +384,35 @@ static void vlan_sync_address(struct net_device *dev,
memcpy(vlan->real_dev_addr, dev->dev_addr, ETH_ALEN);
}
+static void __vlan_device_event(struct net_device *dev, unsigned long event)
+{
+ switch (event) {
+ case NETDEV_CHANGENAME:
+ vlan_proc_rem_dev(dev);
+ if (vlan_proc_add_dev(dev) < 0)
+ pr_warning("8021q: failed to change proc name for %s\n",
+ dev->name);
+ break;
+ }
+}
+
static int vlan_device_event(struct notifier_block *unused, unsigned long event,
void *ptr)
{
struct net_device *dev = ptr;
- struct vlan_group *grp = __vlan_find_group(dev->ifindex);
+ struct vlan_group *grp;
int i, flgs;
struct net_device *vlandev;
if (dev_net(dev) != &init_net)
return NOTIFY_DONE;
+ if (is_vlan_dev(dev)) {
+ __vlan_device_event(dev, event);
+ goto out;
+ }
+
+ grp = __vlan_find_group(dev->ifindex);
if (!grp)
goto out;
diff --git a/net/8021q/vlan.h b/net/8021q/vlan.h
index 73efcc715ccb..51271aea402b 100644
--- a/net/8021q/vlan.h
+++ b/net/8021q/vlan.h
@@ -45,4 +45,9 @@ void vlan_netlink_fini(void);
extern struct rtnl_link_ops vlan_link_ops;
+static inline int is_vlan_dev(struct net_device *dev)
+{
+ return dev->priv_flags & IFF_802_1Q_VLAN;
+}
+
#endif /* !(__BEN_VLAN_802_1Q_INC__) */
diff --git a/net/8021q/vlanproc.c b/net/8021q/vlanproc.c
index 3b8657a0b837..24cd96ee8109 100644
--- a/net/8021q/vlanproc.c
+++ b/net/8021q/vlanproc.c
@@ -210,11 +210,6 @@ int vlan_proc_rem_dev(struct net_device *vlandev)
* The following few functions build the content of /proc/net/vlan/config
*/
-static inline int is_vlan_dev(struct net_device *dev)
-{
- return dev->priv_flags & IFF_802_1Q_VLAN;
-}
-
/* start read of /proc/net/vlan/config */
static void *vlan_seq_start(struct seq_file *seq, loff_t *pos)
__acquires(dev_base_lock)
diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c
index 1220d8a41eb5..d366423c8392 100644
--- a/net/bluetooth/af_bluetooth.c
+++ b/net/bluetooth/af_bluetooth.c
@@ -53,6 +53,30 @@
/* Bluetooth sockets */
#define BT_MAX_PROTO 8
static struct net_proto_family *bt_proto[BT_MAX_PROTO];
+
+static struct lock_class_key bt_slock_key[BT_MAX_PROTO];
+static struct lock_class_key bt_lock_key[BT_MAX_PROTO];
+static const char *bt_key_strings[BT_MAX_PROTO] = {
+ "sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP",
+ "sk_lock-AF_BLUETOOTH-BTPROTO_HCI",
+ "sk_lock-AF_BLUETOOTH-BTPROTO_SCO",
+ "sk_lock-AF_BLUETOOTH-BTPROTO_RFCOMM",
+ "sk_lock-AF_BLUETOOTH-BTPROTO_BNEP",
+ "sk_lock-AF_BLUETOOTH-BTPROTO_CMTP",
+ "sk_lock-AF_BLUETOOTH-BTPROTO_HIDP",
+ "sk_lock-AF_BLUETOOTH-BTPROTO_AVDTP",
+};
+
+static const char *bt_slock_key_strings[BT_MAX_PROTO] = {
+ "slock-AF_BLUETOOTH-BTPROTO_L2CAP",
+ "slock-AF_BLUETOOTH-BTPROTO_HCI",
+ "slock-AF_BLUETOOTH-BTPROTO_SCO",
+ "slock-AF_BLUETOOTH-BTPROTO_RFCOMM",
+ "slock-AF_BLUETOOTH-BTPROTO_BNEP",
+ "slock-AF_BLUETOOTH-BTPROTO_CMTP",
+ "slock-AF_BLUETOOTH-BTPROTO_HIDP",
+ "slock-AF_BLUETOOTH-BTPROTO_AVDTP",
+};
static DEFINE_RWLOCK(bt_proto_lock);
int bt_sock_register(int proto, struct net_proto_family *ops)
@@ -95,6 +119,21 @@ int bt_sock_unregister(int proto)
}
EXPORT_SYMBOL(bt_sock_unregister);
+static void bt_reclassify_sock_lock(struct socket *sock, int proto)
+{
+ struct sock *sk = sock->sk;
+
+ if (!sk)
+ return;
+ BUG_ON(sock_owned_by_user(sk));
+
+ sock_lock_init_class_and_name(sk,
+ bt_slock_key_strings[proto],
+ &bt_slock_key[proto],
+ bt_key_strings[proto],
+ &bt_lock_key[proto]);
+}
+
static int bt_sock_create(struct net *net, struct socket *sock, int proto)
{
int err;
@@ -117,6 +156,7 @@ static int bt_sock_create(struct net *net, struct socket *sock, int proto)
if (bt_proto[proto] && try_module_get(bt_proto[proto]->owner)) {
err = bt_proto[proto]->create(net, sock, proto);
+ bt_reclassify_sock_lock(sock, proto);
module_put(bt_proto[proto]->owner);
}
diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c
index b5d4019d3572..1d36c093523b 100644
--- a/net/bluetooth/hci_sock.c
+++ b/net/bluetooth/hci_sock.c
@@ -84,7 +84,7 @@ static struct hci_sec_filter hci_sec_filter = {
};
static struct bt_sock_list hci_sk_list = {
- .lock = RW_LOCK_UNLOCKED
+ .lock = __RW_LOCK_UNLOCKED(hci_sk_list.lock)
};
/* Send frame to RAW socket */
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index 6b995ac832f5..a4849f2c1d81 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -62,7 +62,7 @@ static u32 l2cap_feat_mask = 0x0000;
static const struct proto_ops l2cap_sock_ops;
static struct bt_sock_list l2cap_sk_list = {
- .lock = RW_LOCK_UNLOCKED
+ .lock = __RW_LOCK_UNLOCKED(l2cap_sk_list.lock)
};
static void __l2cap_sock_close(struct sock *sk, int reason);
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index 0c2c93735e93..eb62558e9b09 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -423,8 +423,8 @@ static int __rfcomm_dlc_close(struct rfcomm_dlc *d, int err)
rfcomm_dlc_lock(d);
d->state = BT_CLOSED;
- d->state_change(d, err);
rfcomm_dlc_unlock(d);
+ d->state_change(d, err);
skb_queue_purge(&d->tx_queue);
rfcomm_dlc_unlink(d);
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index c103fa02893b..5083adcbfae5 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -60,7 +60,7 @@
static const struct proto_ops rfcomm_sock_ops;
static struct bt_sock_list rfcomm_sk_list = {
- .lock = RW_LOCK_UNLOCKED
+ .lock = __RW_LOCK_UNLOCKED(rfcomm_sk_list.lock)
};
static void rfcomm_sock_close(struct sock *sk);
diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c
index e4c779bb8d76..c3f749abb2d0 100644
--- a/net/bluetooth/rfcomm/tty.c
+++ b/net/bluetooth/rfcomm/tty.c
@@ -570,12 +570,7 @@ static void rfcomm_dev_state_change(struct rfcomm_dlc *dlc, int err)
return;
rfcomm_dev_del(dev);
- /* We have to drop DLC lock here, otherwise
- rfcomm_dev_put() will dead lock if it's
- the last reference. */
- rfcomm_dlc_unlock(dlc);
rfcomm_dev_put(dev);
- rfcomm_dlc_lock(dlc);
}
} else
tty_hangup(dev->tty);
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index 2a5953b4405d..b0d487e2db20 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -58,7 +58,7 @@
static const struct proto_ops sco_sock_ops;
static struct bt_sock_list sco_sk_list = {
- .lock = RW_LOCK_UNLOCKED
+ .lock = __RW_LOCK_UNLOCKED(sco_sk_list.lock)
};
static void __sco_chan_add(struct sco_conn *conn, struct sock *sk, struct sock *parent);
diff --git a/net/ipv4/inet_fragment.c b/net/ipv4/inet_fragment.c
index 93170bfcc22e..4ed429bd5951 100644
--- a/net/ipv4/inet_fragment.c
+++ b/net/ipv4/inet_fragment.c
@@ -86,7 +86,10 @@ EXPORT_SYMBOL(inet_frags_fini);
void inet_frags_exit_net(struct netns_frags *nf, struct inet_frags *f)
{
nf->low_thresh = 0;
+
+ local_bh_disable();
inet_frag_evictor(nf, f);
+ local_bh_enable();
}
EXPORT_SYMBOL(inet_frags_exit_net);
diff --git a/net/ipv4/ip_forward.c b/net/ipv4/ip_forward.c
index 9d6d3befd854..4813c39b438b 100644
--- a/net/ipv4/ip_forward.c
+++ b/net/ipv4/ip_forward.c
@@ -85,7 +85,7 @@ int ip_forward(struct sk_buff *skb)
if (opt->is_strictroute && rt->rt_dst != rt->rt_gateway)
goto sr_failed;
- if (unlikely(skb->len > dst_mtu(&rt->u.dst) &&
+ if (unlikely(skb->len > dst_mtu(&rt->u.dst) && !skb_is_gso(skb) &&
(ip_hdr(skb)->frag_off & htons(IP_DF))) && !skb->local_df) {
IP_INC_STATS(IPSTATS_MIB_FRAGFAILS);
icmp_send(skb, ICMP_DEST_UNREACH, ICMP_FRAG_NEEDED,
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 03bd70697481..7b7fcacec4a0 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1551,14 +1551,14 @@ static void *udp_seq_start(struct seq_file *seq, loff_t *pos)
__acquires(udp_hash_lock)
{
read_lock(&udp_hash_lock);
- return *pos ? udp_get_idx(seq, *pos-1) : (void *)1;
+ return *pos ? udp_get_idx(seq, *pos-1) : SEQ_START_TOKEN;
}
static void *udp_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
struct sock *sk;
- if (v == (void *)1)
+ if (v == SEQ_START_TOKEN)
sk = udp_get_idx(seq, 0);
else
sk = udp_get_next(seq, v);
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 5ab9973571ef..87f688857ade 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -776,6 +776,7 @@ static int ipv6_create_tempaddr(struct inet6_ifaddr *ifp, struct inet6_ifaddr *i
struct inet6_dev *idev = ifp->idev;
struct in6_addr addr, *tmpaddr;
unsigned long tmp_prefered_lft, tmp_valid_lft, tmp_cstamp, tmp_tstamp;
+ unsigned long regen_advance;
int tmp_plen;
int ret = 0;
int max_addresses;
@@ -836,8 +837,23 @@ retry:
tmp_tstamp = ifp->tstamp;
spin_unlock_bh(&ifp->lock);
+ regen_advance = idev->cnf.regen_max_retry *
+ idev->cnf.dad_transmits *
+ idev->nd_parms->retrans_time / HZ;
write_unlock(&idev->lock);
+ /* A temporary address is created only if this calculated Preferred
+ * Lifetime is greater than REGEN_ADVANCE time units. In particular,
+ * an implementation must not create a temporary address with a zero
+ * Preferred Lifetime.
+ */
+ if (tmp_prefered_lft <= regen_advance) {
+ in6_ifa_put(ifp);
+ in6_dev_put(idev);
+ ret = -1;
+ goto out;
+ }
+
addr_flags = IFA_F_TEMPORARY;
/* set in addrconf_prefix_rcv() */
if (ifp->flags & IFA_F_OPTIMISTIC)
@@ -1834,6 +1850,9 @@ ok:
* lifetimes of an existing temporary address
* when processing a Prefix Information Option.
*/
+ if (ifp != ift->ifpub)
+ continue;
+
spin_lock(&ift->lock);
flags = ift->flags;
if (ift->valid_lft > valid_lft &&
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index 63309d10df3a..227ce3d2339d 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -440,10 +440,10 @@ void icmpv6_send(struct sk_buff *skb, int type, int code, __u32 info,
}
if (xfrm_decode_session_reverse(skb, &fl2, AF_INET6))
- goto out;
+ goto out_dst_release;
if (ip6_dst_lookup(sk, &dst2, &fl))
- goto out;
+ goto out_dst_release;
err = xfrm_lookup(&dst2, &fl, sk, XFRM_LOOKUP_ICMP);
if (err == -ENOENT) {
diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
index 7e36269826ba..43a617e2268b 100644
--- a/net/ipv6/ip6_input.c
+++ b/net/ipv6/ip6_input.c
@@ -234,8 +234,7 @@ int ip6_mc_input(struct sk_buff *skb)
IP6_INC_STATS_BH(ip6_dst_idev(skb->dst), IPSTATS_MIB_INMCASTPKTS);
hdr = ipv6_hdr(skb);
- deliver = unlikely(skb->dev->flags & (IFF_PROMISC|IFF_ALLMULTI)) ||
- ipv6_chk_mcast_addr(skb->dev, &hdr->daddr, NULL);
+ deliver = ipv6_chk_mcast_addr(skb->dev, &hdr->daddr, NULL);
/*
* IPv6 multicast router mode isnt currently supported.
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index ad8066200f9d..9e5f305b2022 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -171,7 +171,9 @@ static __inline__ void fq_kill(struct nf_ct_frag6_queue *fq)
static void nf_ct_frag6_evictor(void)
{
+ local_bh_disable();
inet_frag_evictor(&nf_init_frags, &nf_frags);
+ local_bh_enable();
}
static void nf_ct_frag6_expire(unsigned long data)
diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c
index f93b57618582..97101dcde4c0 100644
--- a/net/llc/af_llc.c
+++ b/net/llc/af_llc.c
@@ -155,6 +155,9 @@ static int llc_ui_create(struct net *net, struct socket *sock, int protocol)
struct sock *sk;
int rc = -ESOCKTNOSUPPORT;
+ if (!capable(CAP_NET_RAW))
+ return -EPERM;
+
if (net != &init_net)
return -EAFNOSUPPORT;
diff --git a/net/llc/llc_c_ac.c b/net/llc/llc_c_ac.c
index f728ffe288aa..019c780512e8 100644
--- a/net/llc/llc_c_ac.c
+++ b/net/llc/llc_c_ac.c
@@ -198,7 +198,7 @@ int llc_conn_ac_send_disc_cmd_p_set_x(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -223,7 +223,7 @@ int llc_conn_ac_send_dm_rsp_f_set_p(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -249,7 +249,7 @@ int llc_conn_ac_send_dm_rsp_f_set_1(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -282,7 +282,8 @@ int llc_conn_ac_send_frmr_rsp_f_set_x(struct sock *sk, struct sk_buff *skb)
llc_pdu_decode_pf_bit(skb, &f_bit);
else
f_bit = 0;
- nskb = llc_alloc_frame(sk, llc->dev);
+ nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U,
+ sizeof(struct llc_frmr_info));
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -306,7 +307,8 @@ int llc_conn_ac_resend_frmr_rsp_f_set_0(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U,
+ sizeof(struct llc_frmr_info));
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -336,7 +338,8 @@ int llc_conn_ac_resend_frmr_rsp_f_set_p(struct sock *sk, struct sk_buff *skb)
struct llc_sock *llc = llc_sk(sk);
llc_pdu_decode_pf_bit(skb, &f_bit);
- nskb = llc_alloc_frame(sk, llc->dev);
+ nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U,
+ sizeof(struct llc_frmr_info));
if (nskb) {
struct llc_sap *sap = llc->sap;
struct llc_pdu_sn *pdu = llc_pdu_sn_hdr(skb);
@@ -424,7 +427,7 @@ int llc_conn_ac_resend_i_xxx_x_set_0_or_send_rr(struct sock *sk,
struct llc_pdu_sn *pdu = llc_pdu_sn_hdr(skb);
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -459,7 +462,7 @@ int llc_conn_ac_send_rej_cmd_p_set_1(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -483,7 +486,7 @@ int llc_conn_ac_send_rej_rsp_f_set_1(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -507,7 +510,7 @@ int llc_conn_ac_send_rej_xxx_x_set_0(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -531,7 +534,7 @@ int llc_conn_ac_send_rnr_cmd_p_set_1(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -555,7 +558,7 @@ int llc_conn_ac_send_rnr_rsp_f_set_1(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -579,7 +582,7 @@ int llc_conn_ac_send_rnr_xxx_x_set_0(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -615,7 +618,7 @@ int llc_conn_ac_opt_send_rnr_xxx_x_set_0(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -639,7 +642,7 @@ int llc_conn_ac_send_rr_cmd_p_set_1(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -663,7 +666,7 @@ int llc_conn_ac_send_rr_rsp_f_set_1(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -688,7 +691,7 @@ int llc_conn_ac_send_ack_rsp_f_set_1(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -712,7 +715,7 @@ int llc_conn_ac_send_rr_xxx_x_set_0(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -736,7 +739,7 @@ int llc_conn_ac_send_ack_xxx_x_set_0(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -770,7 +773,7 @@ int llc_conn_ac_send_sabme_cmd_p_set_x(struct sock *sk, struct sk_buff *skb)
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
@@ -799,7 +802,7 @@ int llc_conn_ac_send_ua_rsp_f_set_p(struct sock *sk, struct sk_buff *skb)
u8 f_bit;
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_U, 0);
llc_pdu_decode_pf_bit(skb, &f_bit);
if (nskb) {
@@ -956,7 +959,7 @@ static int llc_conn_ac_send_rr_rsp_f_set_ackpf(struct sock *sk,
{
int rc = -ENOBUFS;
struct llc_sock *llc = llc_sk(sk);
- struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev);
+ struct sk_buff *nskb = llc_alloc_frame(sk, llc->dev, LLC_PDU_TYPE_S, 0);
if (nskb) {
struct llc_sap *sap = llc->sap;
diff --git a/net/llc/llc_core.c b/net/llc/llc_core.c
index 248b5903bb13..50d5b10e23a2 100644
--- a/net/llc/llc_core.c
+++ b/net/llc/llc_core.c
@@ -25,8 +25,6 @@
LIST_HEAD(llc_sap_list);
DEFINE_RWLOCK(llc_sap_list_lock);
-unsigned char llc_station_mac_sa[ETH_ALEN];
-
/**
* llc_sap_alloc - allocates and initializes sap.
*
@@ -37,8 +35,8 @@ static struct llc_sap *llc_sap_alloc(void)
struct llc_sap *sap = kzalloc(sizeof(*sap), GFP_ATOMIC);
if (sap) {
+ /* sap->laddr.mac - leave as a null, it's filled by bind */
sap->state = LLC_SAP_STATE_ACTIVE;
- memcpy(sap->laddr.mac, llc_station_mac_sa, ETH_ALEN);
rwlock_init(&sap->sk_list.lock);
atomic_set(&sap->refcnt, 1);
}
@@ -167,10 +165,6 @@ static int __init llc_init(void)
if (dev != NULL)
dev = next_net_device(dev);
- if (dev != NULL)
- memcpy(llc_station_mac_sa, dev->dev_addr, ETH_ALEN);
- else
- memset(llc_station_mac_sa, 0, ETH_ALEN);
dev_add_pack(&llc_packet_type);
dev_add_pack(&llc_tr_packet_type);
return 0;
@@ -185,7 +179,6 @@ static void __exit llc_exit(void)
module_init(llc_init);
module_exit(llc_exit);
-EXPORT_SYMBOL(llc_station_mac_sa);
EXPORT_SYMBOL(llc_sap_list);
EXPORT_SYMBOL(llc_sap_list_lock);
EXPORT_SYMBOL(llc_sap_find);
diff --git a/net/llc/llc_input.c b/net/llc/llc_input.c
index a69c5c427fe3..1c45f172991e 100644
--- a/net/llc/llc_input.c
+++ b/net/llc/llc_input.c
@@ -117,8 +117,12 @@ static inline int llc_fixup_skb(struct sk_buff *skb)
skb_pull(skb, llc_len);
if (skb->protocol == htons(ETH_P_802_2)) {
__be16 pdulen = eth_hdr(skb)->h_proto;
- u16 data_size = ntohs(pdulen) - llc_len;
+ s32 data_size = ntohs(pdulen) - llc_len;
+ if (data_size < 0 ||
+ ((skb_tail_pointer(skb) -
+ (u8 *)pdu) - llc_len) < data_size)
+ return 0;
if (unlikely(pskb_trim_rcsum(skb, data_size)))
return 0;
}
diff --git a/net/llc/llc_pdu.c b/net/llc/llc_pdu.c
index fa8324396db3..2e6cb79196bb 100644
--- a/net/llc/llc_pdu.c
+++ b/net/llc/llc_pdu.c
@@ -241,7 +241,7 @@ void llc_pdu_init_as_frmr_rsp(struct sk_buff *skb, struct llc_pdu_sn *prev_pdu,
FRMR_INFO_SET_PDU_INFO_2LONG_IND(frmr_info, vzyxw);
FRMR_INFO_SET_PDU_INVALID_Nr_IND(frmr_info, vzyxw);
FRMR_INFO_SET_PDU_INVALID_Ns_IND(frmr_info, vzyxw);
- skb_put(skb, 5);
+ skb_put(skb, sizeof(struct llc_frmr_info));
}
/**
diff --git a/net/llc/llc_s_ac.c b/net/llc/llc_s_ac.c
index ac3d93b210d2..a94bd56bcac6 100644
--- a/net/llc/llc_s_ac.c
+++ b/net/llc/llc_s_ac.c
@@ -103,7 +103,8 @@ int llc_sap_action_send_xid_r(struct llc_sap *sap, struct sk_buff *skb)
llc_pdu_decode_sa(skb, mac_da);
llc_pdu_decode_da(skb, mac_sa);
llc_pdu_decode_ssap(skb, &dsap);
- nskb = llc_alloc_frame(NULL, skb->dev);
+ nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U,
+ sizeof(struct llc_xid_info));
if (!nskb)
goto out;
llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, sap->laddr.lsap, dsap,
@@ -144,11 +145,15 @@ int llc_sap_action_send_test_r(struct llc_sap *sap, struct sk_buff *skb)
u8 mac_da[ETH_ALEN], mac_sa[ETH_ALEN], dsap;
struct sk_buff *nskb;
int rc = 1;
+ u32 data_size;
llc_pdu_decode_sa(skb, mac_da);
llc_pdu_decode_da(skb, mac_sa);
llc_pdu_decode_ssap(skb, &dsap);
- nskb = llc_alloc_frame(NULL, skb->dev);
+
+ /* The test request command is type U (llc_len = 3) */
+ data_size = ntohs(eth_hdr(skb)->h_proto) - 3;
+ nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U, data_size);
if (!nskb)
goto out;
llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, sap->laddr.lsap, dsap,
diff --git a/net/llc/llc_sap.c b/net/llc/llc_sap.c
index 2525165e2e8f..e2ddde755019 100644
--- a/net/llc/llc_sap.c
+++ b/net/llc/llc_sap.c
@@ -24,20 +24,41 @@
#include <net/tcp_states.h>
#include <linux/llc.h>
+static int llc_mac_header_len(unsigned short devtype)
+{
+ switch (devtype) {
+ case ARPHRD_ETHER:
+ case ARPHRD_LOOPBACK:
+ return sizeof(struct ethhdr);
+#ifdef CONFIG_TR
+ case ARPHRD_IEEE802_TR:
+ return sizeof(struct trh_hdr);
+#endif
+ }
+ return 0;
+}
+
/**
* llc_alloc_frame - allocates sk_buff for frame
* @dev: network device this skb will be sent over
+ * @type: pdu type to allocate
+ * @data_size: data size to allocate
*
* Allocates an sk_buff for frame and initializes sk_buff fields.
* Returns allocated skb or %NULL when out of memory.
*/
-struct sk_buff *llc_alloc_frame(struct sock *sk, struct net_device *dev)
+struct sk_buff *llc_alloc_frame(struct sock *sk, struct net_device *dev,
+ u8 type, u32 data_size)
{
- struct sk_buff *skb = alloc_skb(128, GFP_ATOMIC);
+ int hlen = type == LLC_PDU_TYPE_U ? 3 : 4;
+ struct sk_buff *skb;
+
+ hlen += llc_mac_header_len(dev->type);
+ skb = alloc_skb(hlen + data_size, GFP_ATOMIC);
if (skb) {
skb_reset_mac_header(skb);
- skb_reserve(skb, 50);
+ skb_reserve(skb, hlen);
skb_reset_network_header(skb);
skb_reset_transport_header(skb);
skb->protocol = htons(ETH_P_802_2);
diff --git a/net/llc/llc_station.c b/net/llc/llc_station.c
index 6f2ea2090322..83da13339490 100644
--- a/net/llc/llc_station.c
+++ b/net/llc/llc_station.c
@@ -253,13 +253,14 @@ static int llc_station_ac_inc_xid_r_cnt_by_1(struct sk_buff *skb)
static int llc_station_ac_send_null_dsap_xid_c(struct sk_buff *skb)
{
int rc = 1;
- struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev);
+ struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U,
+ sizeof(struct llc_xid_info));
if (!nskb)
goto out;
llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, 0, 0, LLC_PDU_CMD);
llc_pdu_init_as_xid_cmd(nskb, LLC_XID_NULL_CLASS_2, 127);
- rc = llc_mac_hdr_init(nskb, llc_station_mac_sa, llc_station_mac_sa);
+ rc = llc_mac_hdr_init(nskb, skb->dev->dev_addr, skb->dev->dev_addr);
if (unlikely(rc))
goto free;
llc_station_send_pdu(nskb);
@@ -274,7 +275,8 @@ static int llc_station_ac_send_xid_r(struct sk_buff *skb)
{
u8 mac_da[ETH_ALEN], dsap;
int rc = 1;
- struct sk_buff* nskb = llc_alloc_frame(NULL, skb->dev);
+ struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U,
+ sizeof(struct llc_xid_info));
if (!nskb)
goto out;
@@ -283,7 +285,7 @@ static int llc_station_ac_send_xid_r(struct sk_buff *skb)
llc_pdu_decode_ssap(skb, &dsap);
llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, 0, dsap, LLC_PDU_RSP);
llc_pdu_init_as_xid_rsp(nskb, LLC_XID_NULL_CLASS_2, 127);
- rc = llc_mac_hdr_init(nskb, llc_station_mac_sa, mac_da);
+ rc = llc_mac_hdr_init(nskb, skb->dev->dev_addr, mac_da);
if (unlikely(rc))
goto free;
llc_station_send_pdu(nskb);
@@ -298,7 +300,12 @@ static int llc_station_ac_send_test_r(struct sk_buff *skb)
{
u8 mac_da[ETH_ALEN], dsap;
int rc = 1;
- struct sk_buff *nskb = llc_alloc_frame(NULL, skb->dev);
+ u32 data_size;
+ struct sk_buff *nskb;
+
+ /* The test request command is type U (llc_len = 3) */
+ data_size = ntohs(eth_hdr(skb)->h_proto) - 3;
+ nskb = llc_alloc_frame(NULL, skb->dev, LLC_PDU_TYPE_U, data_size);
if (!nskb)
goto out;
@@ -307,7 +314,7 @@ static int llc_station_ac_send_test_r(struct sk_buff *skb)
llc_pdu_decode_ssap(skb, &dsap);
llc_pdu_header_init(nskb, LLC_PDU_TYPE_U, 0, dsap, LLC_PDU_RSP);
llc_pdu_init_as_test_rsp(nskb, skb);
- rc = llc_mac_hdr_init(nskb, llc_station_mac_sa, mac_da);
+ rc = llc_mac_hdr_init(nskb, skb->dev->dev_addr, mac_da);
if (unlikely(rc))
goto free;
llc_station_send_pdu(nskb);
diff --git a/net/mac80211/ieee80211.c b/net/mac80211/ieee80211.c
index 5ee431b6256c..aaa5480e204a 100644
--- a/net/mac80211/ieee80211.c
+++ b/net/mac80211/ieee80211.c
@@ -375,6 +375,18 @@ static int ieee80211_open(struct net_device *dev)
if (need_hw_reconfig)
ieee80211_hw_config(local);
+ /*
+ * ieee80211_sta_work is disabled while network interface
+ * is down. Therefore, some configuration changes may not
+ * yet be effective. Trigger execution of ieee80211_sta_work
+ * to fix this.
+ */
+ if(sdata->vif.type == IEEE80211_IF_TYPE_STA ||
+ sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
+ struct ieee80211_if_sta *ifsta = &sdata->u.sta;
+ queue_work(local->hw.workqueue, &ifsta->work);
+ }
+
netif_start_queue(dev);
return 0;
diff --git a/net/mac80211/ieee80211_sta.c b/net/mac80211/ieee80211_sta.c
index 110eaf3ab58c..c20ef89acad6 100644
--- a/net/mac80211/ieee80211_sta.c
+++ b/net/mac80211/ieee80211_sta.c
@@ -360,7 +360,7 @@ static u32 ieee80211_handle_erp_ie(struct ieee80211_sub_if_data *sdata,
struct ieee80211_bss_conf *bss_conf = &sdata->bss_conf;
struct ieee80211_if_sta *ifsta = &sdata->u.sta;
bool use_protection = (erp_value & WLAN_ERP_USE_PROTECTION) != 0;
- bool preamble_mode = (erp_value & WLAN_ERP_BARKER_PREAMBLE) != 0;
+ bool use_short_preamble = (erp_value & WLAN_ERP_BARKER_PREAMBLE) == 0;
DECLARE_MAC_BUF(mac);
u32 changed = 0;
@@ -376,16 +376,15 @@ static u32 ieee80211_handle_erp_ie(struct ieee80211_sub_if_data *sdata,
changed |= BSS_CHANGED_ERP_CTS_PROT;
}
- if (preamble_mode != bss_conf->use_short_preamble) {
+ if (use_short_preamble != bss_conf->use_short_preamble) {
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: switched to %s barker preamble"
" (BSSID=%s)\n",
sdata->dev->name,
- (preamble_mode == WLAN_ERP_PREAMBLE_SHORT) ?
- "short" : "long",
+ use_short_preamble ? "short" : "long",
print_mac(mac, ifsta->bssid));
}
- bss_conf->use_short_preamble = preamble_mode;
+ bss_conf->use_short_preamble = use_short_preamble;
changed |= BSS_CHANGED_ERP_PREAMBLE;
}
diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c
index 92d85c38e4d2..d1ff3f885c5d 100644
--- a/net/rose/af_rose.c
+++ b/net/rose/af_rose.c
@@ -598,17 +598,24 @@ static int rose_release(struct socket *sock)
if (sk == NULL) return 0;
+ sock_hold(sk);
+ sock_orphan(sk);
+ lock_sock(sk);
rose = rose_sk(sk);
switch (rose->state) {
case ROSE_STATE_0:
+ release_sock(sk);
rose_disconnect(sk, 0, -1, -1);
+ lock_sock(sk);
rose_destroy_socket(sk);
break;
case ROSE_STATE_2:
rose->neighbour->use--;
+ release_sock(sk);
rose_disconnect(sk, 0, -1, -1);
+ lock_sock(sk);
rose_destroy_socket(sk);
break;
@@ -633,6 +640,8 @@ static int rose_release(struct socket *sock)
}
sock->sk = NULL;
+ release_sock(sk);
+ sock_put(sk);
return 0;
}
diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
index 10b5c0887fff..b741618e4d54 100644
--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -184,10 +184,22 @@ static inline int qdisc_restart(struct net_device *dev)
void __qdisc_run(struct net_device *dev)
{
- do {
- if (!qdisc_restart(dev))
+ unsigned long start_time = jiffies;
+
+ while (qdisc_restart(dev)) {
+ if (netif_queue_stopped(dev))
+ break;
+
+ /*
+ * Postpone processing if
+ * 1. another process needs the CPU;
+ * 2. we've been doing it for too long.
+ */
+ if (need_resched() || jiffies != start_time) {
+ netif_schedule(dev);
break;
- } while (!netif_queue_stopped(dev));
+ }
+ }
clear_bit(__LINK_STATE_QDISC_RUNNING, &dev->state);
}