summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/arm/CCN.txt15
-rw-r--r--drivers/bus/arm-ccn.c128
2 files changed, 126 insertions, 17 deletions
diff --git a/Documentation/arm/CCN.txt b/Documentation/arm/CCN.txt
index 0632b3aad83e..3a7604874762 100644
--- a/Documentation/arm/CCN.txt
+++ b/Documentation/arm/CCN.txt
@@ -33,6 +33,13 @@ directory, with first 8 configurable by user and additional
Cycle counter is described by a "type" value 0xff and does
not require any other settings.
+The driver also provides a "cpumask" sysfs attribute, which contains
+a single CPU ID, of the processor which will be used to handle all
+the CCN PMU events. It is recommended that the user space tools
+request the events on this processor (if not, the perf_event->cpu value
+will be overwritten anyway). In case of this processor being offlined,
+the events are migrated to another one and the attribute is updated.
+
Example of perf tool use:
/ # perf list | grep ccn
@@ -41,12 +48,8 @@ Example of perf tool use:
ccn/xp_valid_flit/ [Kernel PMU event]
<...>
-/ # perf stat -C 0 -e ccn/cycles/,ccn/xp_valid_flit,xp=1,port=0,vc=1,dir=1/ \
+/ # perf stat -a -e ccn/cycles/,ccn/xp_valid_flit,xp=1,port=0,vc=1,dir=1/ \
sleep 1
The driver does not support sampling, therefore "perf record" will
-not work. Also notice that only single cpu is being selected
-("-C 0") - this is because perf framework does not support
-"non-CPU related" counters (yet?) so system-wide session ("-a")
-would try (and in most cases fail) to set up the same event
-per each CPU.
+not work. Per-task (without "-a") perf sessions are not supported.
diff --git a/drivers/bus/arm-ccn.c b/drivers/bus/arm-ccn.c
index 60397ec77ff7..3374dcb12f1e 100644
--- a/drivers/bus/arm-ccn.c
+++ b/drivers/bus/arm-ccn.c
@@ -166,13 +166,17 @@ struct arm_ccn_dt {
struct hrtimer hrtimer;
+ cpumask_t cpu;
+ struct notifier_block cpu_nb;
+
struct pmu pmu;
};
struct arm_ccn {
struct device *dev;
void __iomem *base;
- unsigned irq_used:1;
+ unsigned int irq;
+
unsigned sbas_present:1;
unsigned sbsx_present:1;
@@ -521,6 +525,25 @@ static struct attribute_group arm_ccn_pmu_cmp_mask_attr_group = {
.attrs = arm_ccn_pmu_cmp_mask_attrs,
};
+static ssize_t arm_ccn_pmu_cpumask_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct arm_ccn *ccn = pmu_to_arm_ccn(dev_get_drvdata(dev));
+
+ return cpumap_print_to_pagebuf(true, buf, &ccn->dt.cpu);
+}
+
+static struct device_attribute arm_ccn_pmu_cpumask_attr =
+ __ATTR(cpumask, S_IRUGO, arm_ccn_pmu_cpumask_show, NULL);
+
+static struct attribute *arm_ccn_pmu_cpumask_attrs[] = {
+ &arm_ccn_pmu_cpumask_attr.attr,
+ NULL,
+};
+
+static struct attribute_group arm_ccn_pmu_cpumask_attr_group = {
+ .attrs = arm_ccn_pmu_cpumask_attrs,
+};
/*
* Default poll period is 10ms, which is way over the top anyway,
@@ -542,6 +565,7 @@ static const struct attribute_group *arm_ccn_pmu_attr_groups[] = {
&arm_ccn_pmu_events_attr_group,
&arm_ccn_pmu_format_attr_group,
&arm_ccn_pmu_cmp_mask_attr_group,
+ &arm_ccn_pmu_cpumask_attr_group,
NULL
};
@@ -642,6 +666,16 @@ static int arm_ccn_pmu_event_init(struct perf_event *event)
dev_warn(ccn->dev, "Can't provide per-task data!\n");
return -EOPNOTSUPP;
}
+ /*
+ * Many perf core operations (eg. events rotation) operate on a
+ * single CPU context. This is obvious for CPU PMUs, where one
+ * expects the same sets of events being observed on all CPUs,
+ * but can lead to issues for off-core PMUs, like CCN, where each
+ * event could be theoretically assigned to a different CPU. To
+ * mitigate this, we enforce CPU assignment to one, selected
+ * processor (the one described in the "cpumask" attribute).
+ */
+ event->cpu = cpumask_first(&ccn->dt.cpu);
node_xp = CCN_CONFIG_NODE(event->attr.config);
type = CCN_CONFIG_TYPE(event->attr.config);
@@ -835,9 +869,15 @@ static void arm_ccn_pmu_event_start(struct perf_event *event, int flags)
arm_ccn_pmu_read_counter(ccn, hw->idx));
hw->state = 0;
- if (!ccn->irq_used)
- hrtimer_start(&ccn->dt.hrtimer, arm_ccn_pmu_timer_period(),
- HRTIMER_MODE_REL);
+ /*
+ * Pin the timer, so that the overflows are handled by the chosen
+ * event->cpu (this is the same one as presented in "cpumask"
+ * attribute).
+ */
+ if (!ccn->irq)
+ __hrtimer_start_range_ns(&ccn->dt.hrtimer,
+ arm_ccn_pmu_timer_period(), 0,
+ HRTIMER_MODE_REL_PINNED, 0);
/* Set the DT bus input, engaging the counter */
arm_ccn_pmu_xp_dt_config(event, 1);
@@ -852,7 +892,7 @@ static void arm_ccn_pmu_event_stop(struct perf_event *event, int flags)
/* Disable counting, setting the DT bus to pass-through mode */
arm_ccn_pmu_xp_dt_config(event, 0);
- if (!ccn->irq_used)
+ if (!ccn->irq)
hrtimer_cancel(&ccn->dt.hrtimer);
/* Let the DT bus drain */
@@ -1079,12 +1119,39 @@ static enum hrtimer_restart arm_ccn_pmu_timer_handler(struct hrtimer *hrtimer)
}
+static int arm_ccn_pmu_cpu_notifier(struct notifier_block *nb,
+ unsigned long action, void *hcpu)
+{
+ struct arm_ccn_dt *dt = container_of(nb, struct arm_ccn_dt, cpu_nb);
+ struct arm_ccn *ccn = container_of(dt, struct arm_ccn, dt);
+ unsigned int cpu = (long)hcpu; /* for (long) see kernel/cpu.c */
+ unsigned int target;
+
+ switch (action & ~CPU_TASKS_FROZEN) {
+ case CPU_DOWN_PREPARE:
+ if (!cpumask_test_and_clear_cpu(cpu, &dt->cpu))
+ break;
+ target = cpumask_any_but(cpu_online_mask, cpu);
+ if (target < 0)
+ break;
+ perf_pmu_migrate_context(&dt->pmu, cpu, target);
+ cpumask_set_cpu(target, &dt->cpu);
+ WARN_ON(irq_set_affinity(ccn->irq, &dt->cpu) != 0);
+ default:
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+
static DEFINE_IDA(arm_ccn_pmu_ida);
static int arm_ccn_pmu_init(struct arm_ccn *ccn)
{
int i;
char *name;
+ int err;
/* Initialize DT subsystem */
ccn->dt.base = ccn->base + CCN_REGION_SIZE;
@@ -1136,20 +1203,58 @@ static int arm_ccn_pmu_init(struct arm_ccn *ccn)
};
/* No overflow interrupt? Have to use a timer instead. */
- if (!ccn->irq_used) {
+ if (!ccn->irq) {
dev_info(ccn->dev, "No access to interrupts, using timer.\n");
hrtimer_init(&ccn->dt.hrtimer, CLOCK_MONOTONIC,
HRTIMER_MODE_REL);
ccn->dt.hrtimer.function = arm_ccn_pmu_timer_handler;
}
- return perf_pmu_register(&ccn->dt.pmu, name, -1);
+ /* Pick one CPU which we will use to collect data from CCN... */
+ cpumask_set_cpu(smp_processor_id(), &ccn->dt.cpu);
+
+ /*
+ * ... and change the selection when it goes offline. Priority is
+ * picked to have a chance to migrate events before perf is notified.
+ */
+ ccn->dt.cpu_nb.notifier_call = arm_ccn_pmu_cpu_notifier;
+ ccn->dt.cpu_nb.priority = CPU_PRI_PERF + 1,
+ err = register_cpu_notifier(&ccn->dt.cpu_nb);
+ if (err)
+ goto error_cpu_notifier;
+
+ /* Also make sure that the overflow interrupt is handled by this CPU */
+ if (ccn->irq) {
+ err = irq_set_affinity(ccn->irq, &ccn->dt.cpu);
+ if (err) {
+ dev_err(ccn->dev, "Failed to set interrupt affinity!\n");
+ goto error_set_affinity;
+ }
+ }
+
+ err = perf_pmu_register(&ccn->dt.pmu, name, -1);
+ if (err)
+ goto error_pmu_register;
+
+ return 0;
+
+error_pmu_register:
+error_set_affinity:
+ unregister_cpu_notifier(&ccn->dt.cpu_nb);
+error_cpu_notifier:
+ ida_simple_remove(&arm_ccn_pmu_ida, ccn->dt.id);
+ for (i = 0; i < ccn->num_xps; i++)
+ writel(0, ccn->xp[i].base + CCN_XP_DT_CONTROL);
+ writel(0, ccn->dt.base + CCN_DT_PMCR);
+ return err;
}
static void arm_ccn_pmu_cleanup(struct arm_ccn *ccn)
{
int i;
+ irq_set_affinity(ccn->irq, cpu_possible_mask);
+ unregister_cpu_notifier(&ccn->dt.cpu_nb);
for (i = 0; i < ccn->num_xps; i++)
writel(0, ccn->xp[i].base + CCN_XP_DT_CONTROL);
writel(0, ccn->dt.base + CCN_DT_PMCR);
@@ -1285,6 +1390,7 @@ static int arm_ccn_probe(struct platform_device *pdev)
{
struct arm_ccn *ccn;
struct resource *res;
+ unsigned int irq;
int err;
ccn = devm_kzalloc(&pdev->dev, sizeof(*ccn), GFP_KERNEL);
@@ -1309,6 +1415,7 @@ static int arm_ccn_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res)
return -EINVAL;
+ irq = res->start;
/* Check if we can use the interrupt */
writel(CCN_MN_ERRINT_STATUS__PMU_EVENTS__DISABLE,
@@ -1318,13 +1425,12 @@ static int arm_ccn_probe(struct platform_device *pdev)
/* Can set 'disable' bits, so can acknowledge interrupts */
writel(CCN_MN_ERRINT_STATUS__PMU_EVENTS__ENABLE,
ccn->base + CCN_MN_ERRINT_STATUS);
- err = devm_request_irq(ccn->dev, res->start,
- arm_ccn_irq_handler, 0, dev_name(ccn->dev),
- ccn);
+ err = devm_request_irq(ccn->dev, irq, arm_ccn_irq_handler, 0,
+ dev_name(ccn->dev), ccn);
if (err)
return err;
- ccn->irq_used = 1;
+ ccn->irq = irq;
}