summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/filesystems/fuse.txt63
-rw-r--r--Documentation/video4linux/CARDLIST.tuner1
-rw-r--r--Makefile35
-rw-r--r--README30
-rw-r--r--arch/arm26/kernel/irq.c3
-rw-r--r--arch/arm26/kernel/ptrace.c2
-rw-r--r--arch/i386/Makefile5
-rw-r--r--arch/i386/kernel/cpu/cpufreq/powernow-k8.c4
-rw-r--r--arch/i386/mm/init.c2
-rw-r--r--arch/ia64/kernel/perfmon.c2
-rw-r--r--arch/ia64/kernel/perfmon_montecito.h269
-rw-r--r--arch/ia64/mm/init.c36
-rw-r--r--arch/ia64/pci/pci.c19
-rw-r--r--arch/ia64/sn/include/xtalk/hubdev.h10
-rw-r--r--arch/ia64/sn/include/xtalk/xbow.h206
-rw-r--r--arch/ia64/sn/include/xtalk/xwidgetdev.h46
-rw-r--r--arch/ia64/sn/kernel/io_init.c10
-rw-r--r--arch/ia64/sn/kernel/irq.c10
-rw-r--r--arch/ia64/sn/kernel/tiocx.c18
-rw-r--r--arch/ia64/sn/pci/pcibr/pcibr_ate.c16
-rw-r--r--arch/ia64/sn/pci/pcibr/pcibr_dma.c44
-rw-r--r--arch/ia64/sn/pci/pcibr/pcibr_provider.c12
-rw-r--r--arch/ia64/sn/pci/pcibr/pcibr_reg.c28
-rw-r--r--arch/ia64/sn/pci/tioca_provider.c36
-rw-r--r--arch/ia64/sn/pci/tioce_provider.c68
-rw-r--r--arch/mips/kernel/reset.c6
-rw-r--r--arch/sh/Kconfig537
-rw-r--r--arch/sh/Kconfig.debug2
-rw-r--r--arch/sh/Makefile60
-rw-r--r--arch/sh/boards/hp6xx/Makefile6
-rw-r--r--arch/sh/boards/hp6xx/hp620/Makefile6
-rw-r--r--arch/sh/boards/hp6xx/hp620/mach.c52
-rw-r--r--arch/sh/boards/hp6xx/hp620/setup.c45
-rw-r--r--arch/sh/boards/hp6xx/hp680/Makefile6
-rw-r--r--arch/sh/boards/hp6xx/hp690/Makefile6
-rw-r--r--arch/sh/boards/hp6xx/hp690/mach.c48
-rw-r--r--arch/sh/boards/hp6xx/mach.c (renamed from arch/sh/boards/hp6xx/hp680/mach.c)15
-rw-r--r--arch/sh/boards/hp6xx/setup.c (renamed from arch/sh/boards/hp6xx/hp680/setup.c)18
-rw-r--r--arch/sh/boards/overdrive/Makefile2
-rw-r--r--arch/sh/boards/overdrive/setup.c6
-rw-r--r--arch/sh/boards/overdrive/time.c119
-rw-r--r--arch/sh/configs/hp6xx_defconfig (renamed from arch/sh/configs/hp680_defconfig)333
-rw-r--r--arch/sh/drivers/dma/dma-api.c51
-rw-r--r--arch/sh/drivers/dma/dma-g2.c3
-rw-r--r--arch/sh/drivers/dma/dma-isa.c20
-rw-r--r--arch/sh/drivers/dma/dma-pvr2.c3
-rw-r--r--arch/sh/drivers/dma/dma-sh.c134
-rw-r--r--arch/sh/drivers/dma/dma-sh.h44
-rw-r--r--arch/sh/drivers/dma/dma-sysfs.c31
-rw-r--r--arch/sh/kernel/Makefile4
-rw-r--r--arch/sh/kernel/cpu/Makefile9
-rw-r--r--arch/sh/kernel/cpu/bus.c2
-rw-r--r--arch/sh/kernel/cpu/clock.c287
-rw-r--r--arch/sh/kernel/cpu/irq/Makefile7
-rw-r--r--arch/sh/kernel/cpu/irq/imask.c (renamed from arch/sh/kernel/cpu/irq_imask.c)16
-rw-r--r--arch/sh/kernel/cpu/irq/intc2.c284
-rw-r--r--arch/sh/kernel/cpu/irq/ipr.c (renamed from arch/sh/kernel/cpu/irq_ipr.c)217
-rw-r--r--arch/sh/kernel/cpu/irq/pint.c169
-rw-r--r--arch/sh/kernel/cpu/sh3/Makefile7
-rw-r--r--arch/sh/kernel/cpu/sh3/clock-sh3.c89
-rw-r--r--arch/sh/kernel/cpu/sh3/clock-sh7300.c78
-rw-r--r--arch/sh/kernel/cpu/sh3/clock-sh7705.c84
-rw-r--r--arch/sh/kernel/cpu/sh3/clock-sh7709.c96
-rw-r--r--arch/sh/kernel/cpu/sh4/Makefile11
-rw-r--r--arch/sh/kernel/cpu/sh4/clock-sh4-202.c179
-rw-r--r--arch/sh/kernel/cpu/sh4/clock-sh4.c80
-rw-r--r--arch/sh/kernel/cpu/sh4/clock-sh73180.c81
-rw-r--r--arch/sh/kernel/cpu/sh4/clock-sh7770.c73
-rw-r--r--arch/sh/kernel/cpu/sh4/clock-sh7780.c126
-rw-r--r--arch/sh/kernel/cpu/sh4/irq_intc2.c222
-rw-r--r--arch/sh/kernel/io.c41
-rw-r--r--arch/sh/kernel/io_generic.c192
-rw-r--r--arch/sh/kernel/irq.c64
-rw-r--r--arch/sh/kernel/machine_kexec.c112
-rw-r--r--arch/sh/kernel/process.c10
-rw-r--r--arch/sh/kernel/relocate_kernel.S102
-rw-r--r--arch/sh/kernel/time.c518
-rw-r--r--arch/sh/kernel/timers/Makefile8
-rw-r--r--arch/sh/kernel/timers/timer-tmu.c229
-rw-r--r--arch/sh/kernel/timers/timer.c50
-rw-r--r--arch/sh/mm/Kconfig233
-rw-r--r--arch/sh/mm/ioremap.c99
-rw-r--r--arch/sh/tools/mach-types5
-rw-r--r--arch/x86_64/Kconfig9
-rw-r--r--arch/x86_64/defconfig21
-rw-r--r--arch/x86_64/ia32/Makefile3
-rw-r--r--arch/x86_64/ia32/ia32_binfmt.c17
-rw-r--r--arch/x86_64/ia32/mmap32.c78
-rw-r--r--arch/x86_64/kernel/apic.c5
-rw-r--r--arch/x86_64/kernel/asm-offsets.c5
-rw-r--r--arch/x86_64/kernel/entry.S12
-rw-r--r--arch/x86_64/kernel/head.S108
-rw-r--r--arch/x86_64/kernel/setup64.c2
-rw-r--r--arch/x86_64/mm/Makefile2
-rw-r--r--arch/x86_64/mm/init.c180
-rw-r--r--arch/x86_64/mm/mmap.c30
-rw-r--r--drivers/block/ps2esdi.c1
-rw-r--r--drivers/char/esp.c2
-rw-r--r--drivers/char/rio/brates.h106
-rw-r--r--drivers/char/rio/chan.h33
-rw-r--r--drivers/char/rio/cmd.h83
-rw-r--r--drivers/char/rio/data.h40
-rw-r--r--drivers/char/rio/debug.h39
-rw-r--r--drivers/char/rio/eisa.h104
-rw-r--r--drivers/char/rio/enable.h48
-rw-r--r--drivers/char/rio/formpkt.h153
-rw-r--r--drivers/char/rio/hosthw.h55
-rw-r--r--drivers/char/rio/lrt.h52
-rw-r--r--drivers/char/rio/ltt.h52
-rw-r--r--drivers/char/rio/lttwake.h50
-rw-r--r--drivers/char/rio/mca.h73
-rw-r--r--drivers/char/rio/mesg.h41
-rw-r--r--drivers/char/rio/poll.h73
-rw-r--r--drivers/char/rio/proto.h244
-rw-r--r--drivers/char/rio/rio_linux.c60
-rw-r--r--drivers/char/rio/rioboot.c61
-rw-r--r--drivers/char/rio/riocmd.c30
-rw-r--r--drivers/char/rio/rioctrl.c111
-rw-r--r--drivers/char/rio/rioinit.c1152
-rw-r--r--drivers/char/rio/riolocks.h43
-rw-r--r--drivers/char/rio/rioparam.c43
-rw-r--r--drivers/char/rio/rioroute.c24
-rw-r--r--drivers/char/rio/riotable.c8
-rw-r--r--drivers/char/rio/riotime.h63
-rw-r--r--drivers/char/rio/riotty.c583
-rw-r--r--drivers/char/rio/riowinif.h1329
-rw-r--r--drivers/char/rio/riscos.h63
-rw-r--r--drivers/char/rio/rtahw.h75
-rw-r--r--drivers/char/rio/rupstat.h50
-rw-r--r--drivers/char/rio/selftest.h73
-rw-r--r--drivers/char/rio/sysmap.h62
-rw-r--r--drivers/char/rio/timeouts.h50
-rw-r--r--drivers/ieee1394/amdtp.c1297
-rw-r--r--drivers/ieee1394/amdtp.h84
-rw-r--r--drivers/ieee1394/cmp.c311
-rw-r--r--drivers/ieee1394/cmp.h31
-rw-r--r--drivers/input/touchscreen/Kconfig2
-rw-r--r--drivers/md/md.c1
-rw-r--r--drivers/media/dvb/bt8xx/bt878.c2
-rw-r--r--drivers/media/dvb/bt8xx/dvb-bt8xx.c4
-rw-r--r--drivers/media/dvb/dvb-core/dvbdev.c22
-rw-r--r--drivers/media/dvb/dvb-usb/cxusb.c2
-rw-r--r--drivers/media/dvb/frontends/dvb-pll.c2
-rw-r--r--drivers/media/dvb/ttpci/av7110.c4
-rw-r--r--drivers/media/dvb/ttpci/av7110_hw.c40
-rw-r--r--drivers/media/dvb/ttpci/av7110_hw.h12
-rw-r--r--drivers/media/video/Makefile3
-rw-r--r--drivers/media/video/arv.c6
-rw-r--r--drivers/media/video/bt832.c2
-rw-r--r--drivers/media/video/btcx-risc.c2
-rw-r--r--drivers/media/video/bttv-cards.c6
-rw-r--r--drivers/media/video/bttv-driver.c87
-rw-r--r--drivers/media/video/bttv-i2c.c6
-rw-r--r--drivers/media/video/bttvp.h5
-rw-r--r--drivers/media/video/cx25840/cx25840-core.c2
-rw-r--r--drivers/media/video/cx88/Kconfig3
-rw-r--r--drivers/media/video/cx88/Makefile1
-rw-r--r--drivers/media/video/cx88/cx88-alsa.c9
-rw-r--r--drivers/media/video/cx88/cx88-core.c15
-rw-r--r--drivers/media/video/cx88/cx88-tvaudio.c8
-rw-r--r--drivers/media/video/cx88/cx88-vp3054-i2c.c4
-rw-r--r--drivers/media/video/em28xx/em28xx-input.c77
-rw-r--r--drivers/media/video/em28xx/em28xx-video.c7
-rw-r--r--drivers/media/video/msp3400-driver.c14
-rw-r--r--drivers/media/video/msp3400.h8
-rw-r--r--drivers/media/video/mt20xx.c12
-rw-r--r--drivers/media/video/planb.c4
-rw-r--r--drivers/media/video/saa6588.c10
-rw-r--r--drivers/media/video/saa711x.c2
-rw-r--r--drivers/media/video/saa7134/saa7134-cards.c6
-rw-r--r--drivers/media/video/saa7134/saa7134-core.c21
-rw-r--r--drivers/media/video/saa7134/saa7134-tvaudio.c11
-rw-r--r--drivers/media/video/tda8290.c4
-rw-r--r--drivers/media/video/tea5767.c18
-rw-r--r--drivers/media/video/tuner-core.c85
-rw-r--r--drivers/media/video/tuner-simple.c794
-rw-r--r--drivers/media/video/tuner-types.c1406
-rw-r--r--drivers/media/video/tveeprom.c2
-rw-r--r--drivers/media/video/tvp5150.c2
-rw-r--r--drivers/media/video/v4l2-common.c1
-rw-r--r--drivers/media/video/videodev.c25
-rw-r--r--drivers/mtd/chips/Kconfig7
-rw-r--r--drivers/mtd/devices/Kconfig1
-rw-r--r--drivers/net/cs89x0.c3
-rw-r--r--drivers/video/sbuslib.c20
-rw-r--r--drivers/video/sbuslib.h4
-rw-r--r--fs/buffer.c2
-rw-r--r--fs/fuse/dev.c225
-rw-r--r--fs/fuse/dir.c18
-rw-r--r--fs/fuse/file.c83
-rw-r--r--fs/fuse/fuse_i.h98
-rw-r--r--fs/fuse/inode.c268
-rw-r--r--fs/namespace.c5
-rw-r--r--fs/partitions/Kconfig7
-rw-r--r--fs/partitions/Makefile1
-rw-r--r--fs/partitions/check.c4
-rw-r--r--fs/partitions/karma.c57
-rw-r--r--fs/partitions/karma.h8
-rw-r--r--include/asm-arm26/cache.h3
-rw-r--r--include/asm-arm26/thread_info.h3
-rw-r--r--include/asm-ia64/pal.h2
-rw-r--r--include/asm-ia64/processor.h4
-rw-r--r--include/asm-ia64/sn/intr.h2
-rw-r--r--include/asm-ia64/sn/pcibr_provider.h48
-rw-r--r--include/asm-ia64/sn/pcibus_provider_defs.h14
-rw-r--r--include/asm-ia64/sn/pcidev.h4
-rw-r--r--include/asm-ia64/sn/pic.h204
-rw-r--r--include/asm-ia64/sn/shubio.h1620
-rw-r--r--include/asm-ia64/sn/sn_sal.h12
-rw-r--r--include/asm-ia64/sn/tioca.h82
-rw-r--r--include/asm-ia64/sn/tioca_provider.h56
-rw-r--r--include/asm-ia64/sn/tioce.h662
-rw-r--r--include/asm-ia64/sn/tioce_provider.h30
-rw-r--r--include/asm-ia64/sn/tiocp.h254
-rw-r--r--include/asm-ia64/sn/tiocx.h14
-rw-r--r--include/asm-sh/bus-sh.h1
-rw-r--r--include/asm-sh/clock.h61
-rw-r--r--include/asm-sh/cpu-sh3/dma.h31
-rw-r--r--include/asm-sh/cpu-sh4/dma.h52
-rw-r--r--include/asm-sh/cpu-sh4/freq.h2
-rw-r--r--include/asm-sh/dma-mapping.h25
-rw-r--r--include/asm-sh/dma.h14
-rw-r--r--include/asm-sh/freq.h11
-rw-r--r--include/asm-sh/io.h283
-rw-r--r--include/asm-sh/io_generic.h96
-rw-r--r--include/asm-sh/irq-sh7780.h349
-rw-r--r--include/asm-sh/irq.h143
-rw-r--r--include/asm-sh/kexec.h33
-rw-r--r--include/asm-sh/machvec.h66
-rw-r--r--include/asm-sh/timer.h42
-rw-r--r--include/asm-x86_64/ia32.h2
-rw-r--r--include/asm-x86_64/irq.h2
-rw-r--r--include/asm-x86_64/page.h7
-rw-r--r--include/asm-x86_64/processor.h9
-rw-r--r--include/asm-x86_64/system.h10
-rw-r--r--include/linux/fs.h3
-rw-r--r--include/linux/i2c-id.h4
-rw-r--r--include/linux/init.h12
-rw-r--r--include/linux/kexec.h1
-rw-r--r--include/media/tuner-types.h55
-rw-r--r--include/media/tuner.h10
-rw-r--r--include/media/v4l2-common.h7
-rw-r--r--init/Kconfig3
-rw-r--r--kernel/Makefile3
-rw-r--r--kernel/hrtimer.c5
-rw-r--r--mm/page_alloc.c14
-rw-r--r--scripts/kconfig/confdata.c2
-rw-r--r--scripts/kconfig/gconf.c2
-rw-r--r--scripts/kconfig/lxdialog/Makefile6
-rw-r--r--scripts/kconfig/lxdialog/check-lxdialog.sh23
-rw-r--r--scripts/kconfig/mconf.c2
-rw-r--r--scripts/kconfig/symbol.c4
252 files changed, 9377 insertions, 12238 deletions
diff --git a/Documentation/filesystems/fuse.txt b/Documentation/filesystems/fuse.txt
index 6b5741e651a2..33f74310d161 100644
--- a/Documentation/filesystems/fuse.txt
+++ b/Documentation/filesystems/fuse.txt
@@ -86,6 +86,62 @@ Mount options
The default is infinite. Note that the size of read requests is
limited anyway to 32 pages (which is 128kbyte on i386).
+Sysfs
+~~~~~
+
+FUSE sets up the following hierarchy in sysfs:
+
+ /sys/fs/fuse/connections/N/
+
+where N is an increasing number allocated to each new connection.
+
+For each connection the following attributes are defined:
+
+ 'waiting'
+
+ The number of requests which are waiting to be transfered to
+ userspace or being processed by the filesystem daemon. If there is
+ no filesystem activity and 'waiting' is non-zero, then the
+ filesystem is hung or deadlocked.
+
+ 'abort'
+
+ Writing anything into this file will abort the filesystem
+ connection. This means that all waiting requests will be aborted an
+ error returned for all aborted and new requests.
+
+Only a privileged user may read or write these attributes.
+
+Aborting a filesystem connection
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+It is possible to get into certain situations where the filesystem is
+not responding. Reasons for this may be:
+
+ a) Broken userspace filesystem implementation
+
+ b) Network connection down
+
+ c) Accidental deadlock
+
+ d) Malicious deadlock
+
+(For more on c) and d) see later sections)
+
+In either of these cases it may be useful to abort the connection to
+the filesystem. There are several ways to do this:
+
+ - Kill the filesystem daemon. Works in case of a) and b)
+
+ - Kill the filesystem daemon and all users of the filesystem. Works
+ in all cases except some malicious deadlocks
+
+ - Use forced umount (umount -f). Works in all cases but only if
+ filesystem is still attached (it hasn't been lazy unmounted)
+
+ - Abort filesystem through the sysfs interface. Most powerful
+ method, always works.
+
How do non-privileged mounts work?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -313,3 +369,10 @@ faulted with get_user_pages(). The 'req->locked' flag indicates
when the copy is taking place, and interruption is delayed until
this flag is unset.
+Scenario 3 - Tricky deadlock with asynchronous read
+---------------------------------------------------
+
+The same situation as above, except thread-1 will wait on page lock
+and hence it will be uninterruptible as well. The solution is to
+abort the connection with forced umount (if mount is attached) or
+through the abort attribute in sysfs.
diff --git a/Documentation/video4linux/CARDLIST.tuner b/Documentation/video4linux/CARDLIST.tuner
index 0bf3d5bf9ef8..f6d0cf7b7922 100644
--- a/Documentation/video4linux/CARDLIST.tuner
+++ b/Documentation/video4linux/CARDLIST.tuner
@@ -68,3 +68,4 @@ tuner=66 - LG NTSC (TALN mini series)
tuner=67 - Philips TD1316 Hybrid Tuner
tuner=68 - Philips TUV1236D ATSC/NTSC dual in
tuner=69 - Tena TNF 5335 MF
+tuner=70 - Samsung TCPN 2121P30A
diff --git a/Makefile b/Makefile
index 673148e07603..c3a727126d26 100644
--- a/Makefile
+++ b/Makefile
@@ -106,12 +106,13 @@ KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
$(if $(KBUILD_OUTPUT),, \
$(error output directory "$(saved-output)" does not exist))
-.PHONY: $(MAKECMDGOALS)
+.PHONY: $(MAKECMDGOALS) cdbuilddir
+$(MAKECMDGOALS) _all: cdbuilddir
-$(filter-out _all,$(MAKECMDGOALS)) _all:
+cdbuilddir:
$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
KBUILD_SRC=$(CURDIR) \
- KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile $@
+ KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile $(MAKECMDGOALS)
# Leave processing to above invocation of make
skip-makefile := 1
@@ -262,6 +263,13 @@ export quiet Q KBUILD_VERBOSE
# cc support functions to be used (only) in arch/$(ARCH)/Makefile
# See documentation in Documentation/kbuild/makefiles.txt
+# as-option
+# Usage: cflags-y += $(call as-option, -Wa$(comma)-isa=foo,)
+
+as-option = $(shell if $(CC) $(CFLAGS) $(1) -Wa,-Z -c -o /dev/null \
+ -xassembler /dev/null > /dev/null 2>&1; then echo "$(1)"; \
+ else echo "$(2)"; fi ;)
+
# cc-option
# Usage: cflags-y += $(call cc-option, -march=winchip-c6, -march=i586)
@@ -337,8 +345,9 @@ AFLAGS := -D__ASSEMBLY__
# Read KERNELRELEASE from .kernelrelease (if it exists)
KERNELRELEASE = $(shell cat .kernelrelease 2> /dev/null)
+KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
-export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE \
+export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION \
ARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \
CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE \
HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
@@ -433,6 +442,7 @@ export KBUILD_DEFCONFIG
config %config: scripts_basic outputmakefile FORCE
$(Q)mkdir -p include/linux
$(Q)$(MAKE) $(build)=scripts/kconfig $@
+ $(Q)$(MAKE) .kernelrelease
else
# ===========================================================================
@@ -542,7 +552,7 @@ export INSTALL_PATH ?= /boot
# makefile but the arguement can be passed to make if needed.
#
-MODLIB := $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
+MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
export MODLIB
@@ -783,12 +793,10 @@ endif
localver-full = $(localver)$(localver-auto)
# Store (new) KERNELRELASE string in .kernelrelease
-kernelrelease = \
- $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)$(localver-full)
+kernelrelease = $(KERNELVERSION)$(localver-full)
.kernelrelease: FORCE
- $(Q)rm -f .kernelrelease
- $(Q)echo $(kernelrelease) > .kernelrelease
- $(Q)echo " Building kernel $(kernelrelease)"
+ $(Q)rm -f $@
+ $(Q)echo $(kernelrelease) > $@
# Things we need to do before we recursively start building the kernel
@@ -898,7 +906,7 @@ define filechk_version.h
)
endef
-include/linux/version.h: $(srctree)/Makefile FORCE
+include/linux/version.h: $(srctree)/Makefile .config FORCE
$(call filechk,version.h)
# ---------------------------------------------------------------------------
@@ -1301,9 +1309,10 @@ checkstack:
$(PERL) $(src)/scripts/checkstack.pl $(ARCH)
kernelrelease:
- @echo $(KERNELRELEASE)
+ $(if $(wildcard .kernelrelease), $(Q)echo $(KERNELRELEASE), \
+ $(error kernelrelease not valid - run 'make *config' to update it))
kernelversion:
- @echo $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
+ @echo $(KERNELVERSION)
# FIXME Should go into a make.lib or something
# ===========================================================================
diff --git a/README b/README
index cd5e2eb6213b..0d318abaf7fd 100644
--- a/README
+++ b/README
@@ -1,4 +1,4 @@
- Linux kernel release 2.6.xx
+ Linux kernel release 2.6.xx <http://kernel.org>
These are the release notes for Linux version 2.6. Read them carefully,
as they tell you what this is all about, explain how to install the
@@ -6,23 +6,31 @@ kernel, and what to do if something goes wrong.
WHAT IS LINUX?
- Linux is a Unix clone written from scratch by Linus Torvalds with
- assistance from a loosely-knit team of hackers across the Net.
- It aims towards POSIX compliance.
+ Linux is a clone of the operating system Unix, written from scratch by
+ Linus Torvalds with assistance from a loosely-knit team of hackers across
+ the Net. It aims towards POSIX and Single UNIX Specification compliance.
- It has all the features you would expect in a modern fully-fledged
- Unix, including true multitasking, virtual memory, shared libraries,
- demand loading, shared copy-on-write executables, proper memory
- management and TCP/IP networking.
+ It has all the features you would expect in a modern fully-fledged Unix,
+ including true multitasking, virtual memory, shared libraries, demand
+ loading, shared copy-on-write executables, proper memory management,
+ and multistack networking including IPv4 and IPv6.
It is distributed under the GNU General Public License - see the
accompanying COPYING file for more details.
ON WHAT HARDWARE DOES IT RUN?
- Linux was first developed for 386/486-based PCs. These days it also
- runs on ARMs, DEC Alphas, SUN Sparcs, M68000 machines (like Atari and
- Amiga), MIPS and PowerPC, and others.
+ Although originally developed first for 32-bit x86-based PCs (386 or higher),
+ today Linux also runs on (at least) the Compaq Alpha AXP, Sun SPARC and
+ UltraSPARC, Motorola 68000, PowerPC, PowerPC64, ARM, Hitachi SuperH,
+ IBM S/390, MIPS, HP PA-RISC, Intel IA-64, DEC VAX, AMD x86-64, AXIS CRIS,
+ and Renesas M32R architectures.
+
+ Linux is easily portable to most general-purpose 32- or 64-bit architectures
+ as long as they have a paged memory management unit (PMMU) and a port of the
+ GNU C compiler (gcc) (part of The GNU Compiler Collection, GCC). Linux has
+ also been ported to a number of architectures without a PMMU, although
+ functionality is then obviously somewhat limited.
DOCUMENTATION:
diff --git a/arch/arm26/kernel/irq.c b/arch/arm26/kernel/irq.c
index f3cc1036e5bc..0934e6fba606 100644
--- a/arch/arm26/kernel/irq.c
+++ b/arch/arm26/kernel/irq.c
@@ -141,7 +141,7 @@ int show_interrupts(struct seq_file *p, void *v)
if (i < NR_IRQS) {
action = irq_desc[i].action;
if (!action)
- continue;
+ goto out;
seq_printf(p, "%3d: %10u ", i, kstat_irqs(i));
seq_printf(p, " %s", action->name);
for (action = action->next; action; action = action->next) {
@@ -152,6 +152,7 @@ int show_interrupts(struct seq_file *p, void *v)
show_fiq_list(p, v);
seq_printf(p, "Err: %10lu\n", irq_err_count);
}
+out:
return 0;
}
diff --git a/arch/arm26/kernel/ptrace.c b/arch/arm26/kernel/ptrace.c
index 3c3371d4683e..282e24d79328 100644
--- a/arch/arm26/kernel/ptrace.c
+++ b/arch/arm26/kernel/ptrace.c
@@ -527,7 +527,7 @@ static int ptrace_getfpregs(struct task_struct *tsk, void *ufp)
static int ptrace_setfpregs(struct task_struct *tsk, void *ufp)
{
set_stopped_child_used_math(tsk);
- return copy_from_user(&task_threas_info(tsk)->fpstate, ufp,
+ return copy_from_user(&task_thread_info(tsk)->fpstate, ufp,
sizeof(struct user_fp)) ? -EFAULT : 0;
}
diff --git a/arch/i386/Makefile b/arch/i386/Makefile
index bd2d53a9dd2b..36bef6543ac1 100644
--- a/arch/i386/Makefile
+++ b/arch/i386/Makefile
@@ -37,10 +37,7 @@ CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2)
# CPU-specific tuning. Anything which can be shared with UML should go here.
include $(srctree)/arch/i386/Makefile.cpu
-# -mregparm=3 works ok on gcc-3.0 and later
-#
-cflags-$(CONFIG_REGPARM) += $(shell if [ $(call cc-version) -ge 0300 ] ; then \
- echo "-mregparm=3"; fi ;)
+cflags-$(CONFIG_REGPARM) += -mregparm=3
# Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use
# a lot more stack due to the lack of sharing of stacklots:
diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
index 0fbbd4c1072e..e11a09207ec8 100644
--- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
@@ -980,7 +980,7 @@ static int powernowk8_verify(struct cpufreq_policy *pol)
}
/* per CPU init entry point to the driver */
-static int __init powernowk8_cpu_init(struct cpufreq_policy *pol)
+static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
{
struct powernow_k8_data *data;
cpumask_t oldmask = CPU_MASK_ALL;
@@ -1141,7 +1141,7 @@ static struct cpufreq_driver cpufreq_amd64_driver = {
};
/* driver entry point for init */
-static int __init powernowk8_init(void)
+static int __cpuinit powernowk8_init(void)
{
unsigned int i, supported_cpus = 0;
diff --git a/arch/i386/mm/init.c b/arch/i386/mm/init.c
index 7df494b51a5b..2700f01994ba 100644
--- a/arch/i386/mm/init.c
+++ b/arch/i386/mm/init.c
@@ -268,7 +268,7 @@ static void __init permanent_kmaps_init(pgd_t *pgd_base)
pkmap_page_table = pte;
}
-static void __devinit free_new_highpage(struct page *page)
+static void __meminit free_new_highpage(struct page *page)
{
set_page_count(page, 1);
__free_page(page);
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index bd87cb6b7a81..2ea4b39efffa 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -628,9 +628,11 @@ static int pfm_write_ibr_dbr(int mode, pfm_context_t *ctx, void *arg, int count,
#include "perfmon_itanium.h"
#include "perfmon_mckinley.h"
+#include "perfmon_montecito.h"
#include "perfmon_generic.h"
static pmu_config_t *pmu_confs[]={
+ &pmu_conf_mont,
&pmu_conf_mck,
&pmu_conf_ita,
&pmu_conf_gen, /* must be last */
diff --git a/arch/ia64/kernel/perfmon_montecito.h b/arch/ia64/kernel/perfmon_montecito.h
new file mode 100644
index 000000000000..cd06ac6a686c
--- /dev/null
+++ b/arch/ia64/kernel/perfmon_montecito.h
@@ -0,0 +1,269 @@
+/*
+ * This file contains the Montecito PMU register description tables
+ * and pmc checker used by perfmon.c.
+ *
+ * Copyright (c) 2005-2006 Hewlett-Packard Development Company, L.P.
+ * Contributed by Stephane Eranian <eranian@hpl.hp.com>
+ */
+static int pfm_mont_pmc_check(struct task_struct *task, pfm_context_t *ctx, unsigned int cnum, unsigned long *val, struct pt_regs *regs);
+
+#define RDEP_MONT_ETB (RDEP(38)|RDEP(39)|RDEP(48)|RDEP(49)|RDEP(50)|RDEP(51)|RDEP(52)|RDEP(53)|RDEP(54)|\
+ RDEP(55)|RDEP(56)|RDEP(57)|RDEP(58)|RDEP(59)|RDEP(60)|RDEP(61)|RDEP(62)|RDEP(63))
+#define RDEP_MONT_DEAR (RDEP(32)|RDEP(33)|RDEP(36))
+#define RDEP_MONT_IEAR (RDEP(34)|RDEP(35))
+
+static pfm_reg_desc_t pfm_mont_pmc_desc[PMU_MAX_PMCS]={
+/* pmc0 */ { PFM_REG_CONTROL , 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {0,0, 0, 0}},
+/* pmc1 */ { PFM_REG_CONTROL , 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {0,0, 0, 0}},
+/* pmc2 */ { PFM_REG_CONTROL , 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {0,0, 0, 0}},
+/* pmc3 */ { PFM_REG_CONTROL , 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {0,0, 0, 0}},
+/* pmc4 */ { PFM_REG_COUNTING, 6, 0x2000000, 0x7c7fff7f, NULL, pfm_mont_pmc_check, {RDEP(4),0, 0, 0}, {0,0, 0, 0}},
+/* pmc5 */ { PFM_REG_COUNTING, 6, 0x2000000, 0x7c7fff7f, NULL, pfm_mont_pmc_check, {RDEP(5),0, 0, 0}, {0,0, 0, 0}},
+/* pmc6 */ { PFM_REG_COUNTING, 6, 0x2000000, 0x7c7fff7f, NULL, pfm_mont_pmc_check, {RDEP(6),0, 0, 0}, {0,0, 0, 0}},
+/* pmc7 */ { PFM_REG_COUNTING, 6, 0x2000000, 0x7c7fff7f, NULL, pfm_mont_pmc_check, {RDEP(7),0, 0, 0}, {0,0, 0, 0}},
+/* pmc8 */ { PFM_REG_COUNTING, 6, 0x2000000, 0x7c7fff7f, NULL, pfm_mont_pmc_check, {RDEP(8),0, 0, 0}, {0,0, 0, 0}},
+/* pmc9 */ { PFM_REG_COUNTING, 6, 0x2000000, 0x7c7fff7f, NULL, pfm_mont_pmc_check, {RDEP(9),0, 0, 0}, {0,0, 0, 0}},
+/* pmc10 */ { PFM_REG_COUNTING, 6, 0x2000000, 0x7c7fff7f, NULL, pfm_mont_pmc_check, {RDEP(10),0, 0, 0}, {0,0, 0, 0}},
+/* pmc11 */ { PFM_REG_COUNTING, 6, 0x2000000, 0x7c7fff7f, NULL, pfm_mont_pmc_check, {RDEP(11),0, 0, 0}, {0,0, 0, 0}},
+/* pmc12 */ { PFM_REG_COUNTING, 6, 0x2000000, 0x7c7fff7f, NULL, pfm_mont_pmc_check, {RDEP(12),0, 0, 0}, {0,0, 0, 0}},
+/* pmc13 */ { PFM_REG_COUNTING, 6, 0x2000000, 0x7c7fff7f, NULL, pfm_mont_pmc_check, {RDEP(13),0, 0, 0}, {0,0, 0, 0}},
+/* pmc14 */ { PFM_REG_COUNTING, 6, 0x2000000, 0x7c7fff7f, NULL, pfm_mont_pmc_check, {RDEP(14),0, 0, 0}, {0,0, 0, 0}},
+/* pmc15 */ { PFM_REG_COUNTING, 6, 0x2000000, 0x7c7fff7f, NULL, pfm_mont_pmc_check, {RDEP(15),0, 0, 0}, {0,0, 0, 0}},
+/* pmc16 */ { PFM_REG_NOTIMPL, },
+/* pmc17 */ { PFM_REG_NOTIMPL, },
+/* pmc18 */ { PFM_REG_NOTIMPL, },
+/* pmc19 */ { PFM_REG_NOTIMPL, },
+/* pmc20 */ { PFM_REG_NOTIMPL, },
+/* pmc21 */ { PFM_REG_NOTIMPL, },
+/* pmc22 */ { PFM_REG_NOTIMPL, },
+/* pmc23 */ { PFM_REG_NOTIMPL, },
+/* pmc24 */ { PFM_REG_NOTIMPL, },
+/* pmc25 */ { PFM_REG_NOTIMPL, },
+/* pmc26 */ { PFM_REG_NOTIMPL, },
+/* pmc27 */ { PFM_REG_NOTIMPL, },
+/* pmc28 */ { PFM_REG_NOTIMPL, },
+/* pmc29 */ { PFM_REG_NOTIMPL, },
+/* pmc30 */ { PFM_REG_NOTIMPL, },
+/* pmc31 */ { PFM_REG_NOTIMPL, },
+/* pmc32 */ { PFM_REG_CONFIG, 0, 0x30f01ffffffffff, 0x30f01ffffffffff, NULL, pfm_mont_pmc_check, {0,0, 0, 0}, {0,0, 0, 0}},
+/* pmc33 */ { PFM_REG_CONFIG, 0, 0x0, 0x1ffffffffff, NULL, pfm_mont_pmc_check, {0,0, 0, 0}, {0,0, 0, 0}},
+/* pmc34 */ { PFM_REG_CONFIG, 0, 0xf01ffffffffff, 0xf01ffffffffff, NULL, pfm_mont_pmc_check, {0,0, 0, 0}, {0,0, 0, 0}},
+/* pmc35 */ { PFM_REG_CONFIG, 0, 0x0, 0x1ffffffffff, NULL, pfm_mont_pmc_check, {0,0, 0, 0}, {0,0, 0, 0}},
+/* pmc36 */ { PFM_REG_CONFIG, 0, 0xfffffff0, 0xf, NULL, pfm_mont_pmc_check, {0,0, 0, 0}, {0,0, 0, 0}},
+/* pmc37 */ { PFM_REG_MONITOR, 4, 0x0, 0x3fff, NULL, pfm_mont_pmc_check, {RDEP_MONT_IEAR, 0, 0, 0}, {0, 0, 0, 0}},
+/* pmc38 */ { PFM_REG_CONFIG, 0, 0xdb6, 0x2492, NULL, pfm_mont_pmc_check, {0,0, 0, 0}, {0,0, 0, 0}},
+/* pmc39 */ { PFM_REG_MONITOR, 6, 0x0, 0xffcf, NULL, pfm_mont_pmc_check, {RDEP_MONT_ETB,0, 0, 0}, {0,0, 0, 0}},
+/* pmc40 */ { PFM_REG_MONITOR, 6, 0x2000000, 0xf01cf, NULL, pfm_mont_pmc_check, {RDEP_MONT_DEAR,0, 0, 0}, {0,0, 0, 0}},
+/* pmc41 */ { PFM_REG_CONFIG, 0, 0x00002078fefefefe, 0x1e00018181818, NULL, pfm_mont_pmc_check, {0,0, 0, 0}, {0,0, 0, 0}},
+/* pmc42 */ { PFM_REG_MONITOR, 6, 0x0, 0x7ff4f, NULL, pfm_mont_pmc_check, {RDEP_MONT_ETB,0, 0, 0}, {0,0, 0, 0}},
+ { PFM_REG_END , 0, 0x0, -1, NULL, NULL, {0,}, {0,}}, /* end marker */
+};
+
+static pfm_reg_desc_t pfm_mont_pmd_desc[PMU_MAX_PMDS]={
+/* pmd0 */ { PFM_REG_NOTIMPL, },
+/* pmd1 */ { PFM_REG_NOTIMPL, },
+/* pmd2 */ { PFM_REG_NOTIMPL, },
+/* pmd3 */ { PFM_REG_NOTIMPL, },
+/* pmd4 */ { PFM_REG_COUNTING, 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {RDEP(4),0, 0, 0}},
+/* pmd5 */ { PFM_REG_COUNTING, 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {RDEP(5),0, 0, 0}},
+/* pmd6 */ { PFM_REG_COUNTING, 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {RDEP(6),0, 0, 0}},
+/* pmd7 */ { PFM_REG_COUNTING, 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {RDEP(7),0, 0, 0}},
+/* pmd8 */ { PFM_REG_COUNTING, 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {RDEP(8),0, 0, 0}},
+/* pmd9 */ { PFM_REG_COUNTING, 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {RDEP(9),0, 0, 0}},
+/* pmd10 */ { PFM_REG_COUNTING, 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {RDEP(10),0, 0, 0}},
+/* pmd11 */ { PFM_REG_COUNTING, 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {RDEP(11),0, 0, 0}},
+/* pmd12 */ { PFM_REG_COUNTING, 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {RDEP(12),0, 0, 0}},
+/* pmd13 */ { PFM_REG_COUNTING, 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {RDEP(13),0, 0, 0}},
+/* pmd14 */ { PFM_REG_COUNTING, 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {RDEP(14),0, 0, 0}},
+/* pmd15 */ { PFM_REG_COUNTING, 0, 0x0, -1, NULL, NULL, {0,0, 0, 0}, {RDEP(15),0, 0, 0}},
+/* pmd16 */ { PFM_REG_NOTIMPL, },
+/* pmd17 */ { PFM_REG_NOTIMPL, },
+/* pmd18 */ { PFM_REG_NOTIMPL, },
+/* pmd19 */ { PFM_REG_NOTIMPL, },
+/* pmd20 */ { PFM_REG_NOTIMPL, },
+/* pmd21 */ { PFM_REG_NOTIMPL, },
+/* pmd22 */ { PFM_REG_NOTIMPL, },
+/* pmd23 */ { PFM_REG_NOTIMPL, },
+/* pmd24 */ { PFM_REG_NOTIMPL, },
+/* pmd25 */ { PFM_REG_NOTIMPL, },
+/* pmd26 */ { PFM_REG_NOTIMPL, },
+/* pmd27 */ { PFM_REG_NOTIMPL, },
+/* pmd28 */ { PFM_REG_NOTIMPL, },
+/* pmd29 */ { PFM_REG_NOTIMPL, },
+/* pmd30 */ { PFM_REG_NOTIMPL, },
+/* pmd31 */ { PFM_REG_NOTIMPL, },
+/* pmd32 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP(33)|RDEP(36),0, 0, 0}, {RDEP(40),0, 0, 0}},
+/* pmd33 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP(32)|RDEP(36),0, 0, 0}, {RDEP(40),0, 0, 0}},
+/* pmd34 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP(35),0, 0, 0}, {RDEP(37),0, 0, 0}},
+/* pmd35 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP(34),0, 0, 0}, {RDEP(37),0, 0, 0}},
+/* pmd36 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP(32)|RDEP(33),0, 0, 0}, {RDEP(40),0, 0, 0}},
+/* pmd37 */ { PFM_REG_NOTIMPL, },
+/* pmd38 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
+/* pmd39 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
+/* pmd40 */ { PFM_REG_NOTIMPL, },
+/* pmd41 */ { PFM_REG_NOTIMPL, },
+/* pmd42 */ { PFM_REG_NOTIMPL, },
+/* pmd43 */ { PFM_REG_NOTIMPL, },
+/* pmd44 */ { PFM_REG_NOTIMPL, },
+/* pmd45 */ { PFM_REG_NOTIMPL, },
+/* pmd46 */ { PFM_REG_NOTIMPL, },
+/* pmd47 */ { PFM_REG_NOTIMPL, },
+/* pmd48 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
+/* pmd49 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
+/* pmd50 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
+/* pmd51 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
+/* pmd52 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
+/* pmd53 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
+/* pmd54 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
+/* pmd55 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
+/* pmd56 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
+/* pmd57 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
+/* pmd58 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
+/* pmd59 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
+/* pmd60 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
+/* pmd61 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
+/* pmd62 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
+/* pmd63 */ { PFM_REG_BUFFER, 0, 0x0, -1, NULL, NULL, {RDEP_MONT_ETB,0, 0, 0}, {RDEP(39),0, 0, 0}},
+ { PFM_REG_END , 0, 0x0, -1, NULL, NULL, {0,}, {0,}}, /* end marker */
+};
+
+/*
+ * PMC reserved fields must have their power-up values preserved
+ */
+static int
+pfm_mont_reserved(unsigned int cnum, unsigned long *val, struct pt_regs *regs)
+{
+ unsigned long tmp1, tmp2, ival = *val;
+
+ /* remove reserved areas from user value */
+ tmp1 = ival & PMC_RSVD_MASK(cnum);
+
+ /* get reserved fields values */
+ tmp2 = PMC_DFL_VAL(cnum) & ~PMC_RSVD_MASK(cnum);
+
+ *val = tmp1 | tmp2;
+
+ DPRINT(("pmc[%d]=0x%lx, mask=0x%lx, reset=0x%lx, val=0x%lx\n",
+ cnum, ival, PMC_RSVD_MASK(cnum), PMC_DFL_VAL(cnum), *val));
+ return 0;
+}
+
+/*
+ * task can be NULL if the context is unloaded
+ */
+static int
+pfm_mont_pmc_check(struct task_struct *task, pfm_context_t *ctx, unsigned int cnum, unsigned long *val, struct pt_regs *regs)
+{
+ int ret = 0;
+ unsigned long val32 = 0, val38 = 0, val41 = 0;
+ unsigned long tmpval;
+ int check_case1 = 0;
+ int is_loaded;
+
+ /* first preserve the reserved fields */
+ pfm_mont_reserved(cnum, val, regs);
+
+ tmpval = *val;
+
+ /* sanity check */
+ if (ctx == NULL) return -EINVAL;
+
+ is_loaded = ctx->ctx_state == PFM_CTX_LOADED || ctx->ctx_state == PFM_CTX_MASKED;
+
+ /*
+ * we must clear the debug registers if pmc41 has a value which enable
+ * memory pipeline event constraints. In this case we need to clear the
+ * the debug registers if they have not yet been accessed. This is required
+ * to avoid picking stale state.
+ * PMC41 is "active" if:
+ * one of the pmc41.cfg_dtagXX field is different from 0x3
+ * AND
+ * at the corresponding pmc41.en_dbrpXX is set.
+ * AND
+ * ctx_fl_using_dbreg == 0 (i.e., dbr not yet used)
+ */
+ DPRINT(("cnum=%u val=0x%lx, using_dbreg=%d loaded=%d\n", cnum, tmpval, ctx->ctx_fl_using_dbreg, is_loaded));
+
+ if (cnum == 41 && is_loaded
+ && (tmpval & 0x1e00000000000) && (tmpval & 0x18181818UL) != 0x18181818UL && ctx->ctx_fl_using_dbreg == 0) {
+
+ DPRINT(("pmc[%d]=0x%lx has active pmc41 settings, clearing dbr\n", cnum, tmpval));
+
+ /* don't mix debug with perfmon */
+ if (task && (task->thread.flags & IA64_THREAD_DBG_VALID) != 0) return -EINVAL;
+
+ /*
+ * a count of 0 will mark the debug registers if:
+ * AND
+ */
+ ret = pfm_write_ibr_dbr(PFM_DATA_RR, ctx, NULL, 0, regs);
+ if (ret) return ret;
+ }
+ /*
+ * we must clear the (instruction) debug registers if:
+ * pmc38.ig_ibrpX is 0 (enabled)
+ * AND
+ * ctx_fl_using_dbreg == 0 (i.e., dbr not yet used)
+ */
+ if (cnum == 38 && is_loaded && ((tmpval & 0x492UL) != 0x492UL) && ctx->ctx_fl_using_dbreg == 0) {
+
+ DPRINT(("pmc38=0x%lx has active pmc38 settings, clearing ibr\n", tmpval));
+
+ /* don't mix debug with perfmon */
+ if (task && (task->thread.flags & IA64_THREAD_DBG_VALID) != 0) return -EINVAL;
+
+ /*
+ * a count of 0 will mark the debug registers as in use and also
+ * ensure that they are properly cleared.
+ */
+ ret = pfm_write_ibr_dbr(PFM_CODE_RR, ctx, NULL, 0, regs);
+ if (ret) return ret;
+
+ }
+ switch(cnum) {
+ case 32: val32 = *val;
+ val38 = ctx->ctx_pmcs[38];
+ val41 = ctx->ctx_pmcs[41];
+ check_case1 = 1;
+ break;
+ case 38: val38 = *val;
+ val32 = ctx->ctx_pmcs[32];
+ val41 = ctx->ctx_pmcs[41];
+ check_case1 = 1;
+ break;
+ case 41: val41 = *val;
+ val32 = ctx->ctx_pmcs[32];
+ val38 = ctx->ctx_pmcs[38];
+ check_case1 = 1;
+ break;
+ }
+ /* check illegal configuration which can produce inconsistencies in tagging
+ * i-side events in L1D and L2 caches
+ */
+ if (check_case1) {
+ ret = (((val41 >> 45) & 0xf) == 0 && ((val32>>57) & 0x1) == 0)
+ && ((((val38>>1) & 0x3) == 0x2 || ((val38>>1) & 0x3) == 0)
+ || (((val38>>4) & 0x3) == 0x2 || ((val38>>4) & 0x3) == 0));
+ if (ret) {
+ DPRINT(("invalid config pmc38=0x%lx pmc41=0x%lx pmc32=0x%lx\n", val38, val41, val32));
+ return -EINVAL;
+ }
+ }
+ *val = tmpval;
+ return 0;
+}
+
+/*
+ * impl_pmcs, impl_pmds are computed at runtime to minimize errors!
+ */
+static pmu_config_t pmu_conf_mont={
+ .pmu_name = "Montecito",
+ .pmu_family = 0x20,
+ .flags = PFM_PMU_IRQ_RESEND,
+ .ovfl_val = (1UL << 47) - 1,
+ .pmd_desc = pfm_mont_pmd_desc,
+ .pmc_desc = pfm_mont_pmc_desc,
+ .num_ibrs = 8,
+ .num_dbrs = 8,
+ .use_rr_dbregs = 1 /* debug register are use for range retrictions */
+};
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index e3215ba64ffd..b38b6d213c15 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -635,3 +635,39 @@ mem_init (void)
ia32_mem_init();
#endif
}
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+void online_page(struct page *page)
+{
+ ClearPageReserved(page);
+ set_page_count(page, 1);
+ __free_page(page);
+ totalram_pages++;
+ num_physpages++;
+}
+
+int add_memory(u64 start, u64 size)
+{
+ pg_data_t *pgdat;
+ struct zone *zone;
+ unsigned long start_pfn = start >> PAGE_SHIFT;
+ unsigned long nr_pages = size >> PAGE_SHIFT;
+ int ret;
+
+ pgdat = NODE_DATA(0);
+
+ zone = pgdat->node_zones + ZONE_NORMAL;
+ ret = __add_pages(zone, start_pfn, nr_pages);
+
+ if (ret)
+ printk("%s: Problem encountered in __add_pages() as ret=%d\n",
+ __FUNCTION__, ret);
+
+ return ret;
+}
+
+int remove_memory(u64 start, u64 size)
+{
+ return -EINVAL;
+}
+#endif
diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c
index 30dbc98bf0b3..d27ecdcb6fca 100644
--- a/arch/ia64/pci/pci.c
+++ b/arch/ia64/pci/pci.c
@@ -454,14 +454,13 @@ static int __devinit is_valid_resource(struct pci_dev *dev, int idx)
return 0;
}
-static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
+static void __devinit
+pcibios_fixup_resources(struct pci_dev *dev, int start, int limit)
{
struct pci_bus_region region;
int i;
- int limit = (dev->hdr_type == PCI_HEADER_TYPE_NORMAL) ? \
- PCI_BRIDGE_RESOURCES : PCI_NUM_RESOURCES;
- for (i = 0; i < limit; i++) {
+ for (i = start; i < limit; i++) {
if (!dev->resource[i].flags)
continue;
region.start = dev->resource[i].start;
@@ -472,6 +471,16 @@ static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
}
}
+static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
+{
+ pcibios_fixup_resources(dev, 0, PCI_BRIDGE_RESOURCES);
+}
+
+static void __devinit pcibios_fixup_bridge_resources(struct pci_dev *dev)
+{
+ pcibios_fixup_resources(dev, PCI_BRIDGE_RESOURCES, PCI_NUM_RESOURCES);
+}
+
/*
* Called after each bus is probed, but before its children are examined.
*/
@@ -482,7 +491,7 @@ pcibios_fixup_bus (struct pci_bus *b)
if (b->self) {
pci_read_bridge_bases(b);
- pcibios_fixup_device_resources(b->self);
+ pcibios_fixup_bridge_resources(b->self);
}
list_for_each_entry(dev, &b->devices, bus_list)
pcibios_fixup_device_resources(dev);
diff --git a/arch/ia64/sn/include/xtalk/hubdev.h b/arch/ia64/sn/include/xtalk/hubdev.h
index 4d417c301201..7c88e9a58516 100644
--- a/arch/ia64/sn/include/xtalk/hubdev.h
+++ b/arch/ia64/sn/include/xtalk/hubdev.h
@@ -40,8 +40,8 @@ struct sn_flush_device_common {
unsigned long sfdl_force_int_addr;
unsigned long sfdl_flush_value;
volatile unsigned long *sfdl_flush_addr;
- uint32_t sfdl_persistent_busnum;
- uint32_t sfdl_persistent_segment;
+ u32 sfdl_persistent_busnum;
+ u32 sfdl_persistent_segment;
struct pcibus_info *sfdl_pcibus_info;
};
@@ -56,7 +56,7 @@ struct sn_flush_device_kernel {
*/
struct sn_flush_nasid_entry {
struct sn_flush_device_kernel **widget_p; // Used as an array of wid_num
- uint64_t iio_itte[8];
+ u64 iio_itte[8];
};
struct hubdev_info {
@@ -70,8 +70,8 @@ struct hubdev_info {
void *hdi_nodepda;
void *hdi_node_vertex;
- uint32_t max_segment_number;
- uint32_t max_pcibus_number;
+ u32 max_segment_number;
+ u32 max_pcibus_number;
};
extern void hubdev_init_node(nodepda_t *, cnodeid_t);
diff --git a/arch/ia64/sn/include/xtalk/xbow.h b/arch/ia64/sn/include/xtalk/xbow.h
index ec56b3432f17..90f37a4133d0 100644
--- a/arch/ia64/sn/include/xtalk/xbow.h
+++ b/arch/ia64/sn/include/xtalk/xbow.h
@@ -3,7 +3,8 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1992-1997,2000-2004 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (C) 1992-1997,2000-2006 Silicon Graphics, Inc. All Rights
+ * Reserved.
*/
#ifndef _ASM_IA64_SN_XTALK_XBOW_H
#define _ASM_IA64_SN_XTALK_XBOW_H
@@ -21,94 +22,94 @@
/* Register set for each xbow link */
typedef volatile struct xb_linkregs_s {
-/*
+/*
* we access these through synergy unswizzled space, so the address
* gets twiddled (i.e. references to 0x4 actually go to 0x0 and vv.)
* That's why we put the register first and filler second.
*/
- uint32_t link_ibf;
- uint32_t filler0; /* filler for proper alignment */
- uint32_t link_control;
- uint32_t filler1;
- uint32_t link_status;
- uint32_t filler2;
- uint32_t link_arb_upper;
- uint32_t filler3;
- uint32_t link_arb_lower;
- uint32_t filler4;
- uint32_t link_status_clr;
- uint32_t filler5;
- uint32_t link_reset;
- uint32_t filler6;
- uint32_t link_aux_status;
- uint32_t filler7;
+ u32 link_ibf;
+ u32 filler0; /* filler for proper alignment */
+ u32 link_control;
+ u32 filler1;
+ u32 link_status;
+ u32 filler2;
+ u32 link_arb_upper;
+ u32 filler3;
+ u32 link_arb_lower;
+ u32 filler4;
+ u32 link_status_clr;
+ u32 filler5;
+ u32 link_reset;
+ u32 filler6;
+ u32 link_aux_status;
+ u32 filler7;
} xb_linkregs_t;
typedef volatile struct xbow_s {
- /* standard widget configuration 0x000000-0x000057 */
- struct widget_cfg xb_widget; /* 0x000000 */
-
- /* helper fieldnames for accessing bridge widget */
-
-#define xb_wid_id xb_widget.w_id
-#define xb_wid_stat xb_widget.w_status
-#define xb_wid_err_upper xb_widget.w_err_upper_addr
-#define xb_wid_err_lower xb_widget.w_err_lower_addr
-#define xb_wid_control xb_widget.w_control
-#define xb_wid_req_timeout xb_widget.w_req_timeout
-#define xb_wid_int_upper xb_widget.w_intdest_upper_addr
-#define xb_wid_int_lower xb_widget.w_intdest_lower_addr
-#define xb_wid_err_cmdword xb_widget.w_err_cmd_word
-#define xb_wid_llp xb_widget.w_llp_cfg
-#define xb_wid_stat_clr xb_widget.w_tflush
-
-/*
+ /* standard widget configuration 0x000000-0x000057 */
+ struct widget_cfg xb_widget; /* 0x000000 */
+
+ /* helper fieldnames for accessing bridge widget */
+
+#define xb_wid_id xb_widget.w_id
+#define xb_wid_stat xb_widget.w_status
+#define xb_wid_err_upper xb_widget.w_err_upper_addr
+#define xb_wid_err_lower xb_widget.w_err_lower_addr
+#define xb_wid_control xb_widget.w_control
+#define xb_wid_req_timeout xb_widget.w_req_timeout
+#define xb_wid_int_upper xb_widget.w_intdest_upper_addr
+#define xb_wid_int_lower xb_widget.w_intdest_lower_addr
+#define xb_wid_err_cmdword xb_widget.w_err_cmd_word
+#define xb_wid_llp xb_widget.w_llp_cfg
+#define xb_wid_stat_clr xb_widget.w_tflush
+
+/*
* we access these through synergy unswizzled space, so the address
* gets twiddled (i.e. references to 0x4 actually go to 0x0 and vv.)
* That's why we put the register first and filler second.
*/
- /* xbow-specific widget configuration 0x000058-0x0000FF */
- uint32_t xb_wid_arb_reload; /* 0x00005C */
- uint32_t _pad_000058;
- uint32_t xb_perf_ctr_a; /* 0x000064 */
- uint32_t _pad_000060;
- uint32_t xb_perf_ctr_b; /* 0x00006c */
- uint32_t _pad_000068;
- uint32_t xb_nic; /* 0x000074 */
- uint32_t _pad_000070;
-
- /* Xbridge only */
- uint32_t xb_w0_rst_fnc; /* 0x00007C */
- uint32_t _pad_000078;
- uint32_t xb_l8_rst_fnc; /* 0x000084 */
- uint32_t _pad_000080;
- uint32_t xb_l9_rst_fnc; /* 0x00008c */
- uint32_t _pad_000088;
- uint32_t xb_la_rst_fnc; /* 0x000094 */
- uint32_t _pad_000090;
- uint32_t xb_lb_rst_fnc; /* 0x00009c */
- uint32_t _pad_000098;
- uint32_t xb_lc_rst_fnc; /* 0x0000a4 */
- uint32_t _pad_0000a0;
- uint32_t xb_ld_rst_fnc; /* 0x0000ac */
- uint32_t _pad_0000a8;
- uint32_t xb_le_rst_fnc; /* 0x0000b4 */
- uint32_t _pad_0000b0;
- uint32_t xb_lf_rst_fnc; /* 0x0000bc */
- uint32_t _pad_0000b8;
- uint32_t xb_lock; /* 0x0000c4 */
- uint32_t _pad_0000c0;
- uint32_t xb_lock_clr; /* 0x0000cc */
- uint32_t _pad_0000c8;
- /* end of Xbridge only */
- uint32_t _pad_0000d0[12];
-
- /* Link Specific Registers, port 8..15 0x000100-0x000300 */
- xb_linkregs_t xb_link_raw[MAX_XBOW_PORTS];
-#define xb_link(p) xb_link_raw[(p) & (MAX_XBOW_PORTS - 1)]
-
+ /* xbow-specific widget configuration 0x000058-0x0000FF */
+ u32 xb_wid_arb_reload; /* 0x00005C */
+ u32 _pad_000058;
+ u32 xb_perf_ctr_a; /* 0x000064 */
+ u32 _pad_000060;
+ u32 xb_perf_ctr_b; /* 0x00006c */
+ u32 _pad_000068;
+ u32 xb_nic; /* 0x000074 */
+ u32 _pad_000070;
+
+ /* Xbridge only */
+ u32 xb_w0_rst_fnc; /* 0x00007C */
+ u32 _pad_000078;
+ u32 xb_l8_rst_fnc; /* 0x000084 */
+ u32 _pad_000080;
+ u32 xb_l9_rst_fnc; /* 0x00008c */
+ u32 _pad_000088;
+ u32 xb_la_rst_fnc; /* 0x000094 */
+ u32 _pad_000090;
+ u32 xb_lb_rst_fnc; /* 0x00009c */
+ u32 _pad_000098;
+ u32 xb_lc_rst_fnc; /* 0x0000a4 */
+ u32 _pad_0000a0;
+ u32 xb_ld_rst_fnc; /* 0x0000ac */
+ u32 _pad_0000a8;
+ u32 xb_le_rst_fnc; /* 0x0000b4 */
+ u32 _pad_0000b0;
+ u32 xb_lf_rst_fnc; /* 0x0000bc */
+ u32 _pad_0000b8;
+ u32 xb_lock; /* 0x0000c4 */
+ u32 _pad_0000c0;
+ u32 xb_lock_clr; /* 0x0000cc */
+ u32 _pad_0000c8;
+ /* end of Xbridge only */
+ u32 _pad_0000d0[12];
+
+ /* Link Specific Registers, port 8..15 0x000100-0x000300 */
+ xb_linkregs_t xb_link_raw[MAX_XBOW_PORTS];
} xbow_t;
+#define xb_link(p) xb_link_raw[(p) & (MAX_XBOW_PORTS - 1)]
+
#define XB_FLAGS_EXISTS 0x1 /* device exists */
#define XB_FLAGS_MASTER 0x2
#define XB_FLAGS_SLAVE 0x0
@@ -160,7 +161,7 @@ typedef volatile struct xbow_s {
/* End of Xbridge only */
/* used only in ide, but defined here within the reserved portion */
-/* of the widget0 address space (before 0xf4) */
+/* of the widget0 address space (before 0xf4) */
#define XBOW_WID_UNDEF 0xe4
/* xbow link register set base, legal value for x is 0x8..0xf */
@@ -179,29 +180,37 @@ typedef volatile struct xbow_s {
/* link_control(x) */
#define XB_CTRL_LINKALIVE_IE 0x80000000 /* link comes alive */
- /* reserved: 0x40000000 */
+/* reserved: 0x40000000 */
#define XB_CTRL_PERF_CTR_MODE_MSK 0x30000000 /* perf counter mode */
-#define XB_CTRL_IBUF_LEVEL_MSK 0x0e000000 /* input packet buffer level */
-#define XB_CTRL_8BIT_MODE 0x01000000 /* force link into 8 bit mode */
-#define XB_CTRL_BAD_LLP_PKT 0x00800000 /* force bad LLP packet */
-#define XB_CTRL_WIDGET_CR_MSK 0x007c0000 /* LLP widget credit mask */
-#define XB_CTRL_WIDGET_CR_SHFT 18 /* LLP widget credit shift */
-#define XB_CTRL_ILLEGAL_DST_IE 0x00020000 /* illegal destination */
-#define XB_CTRL_OALLOC_IBUF_IE 0x00010000 /* overallocated input buffer */
- /* reserved: 0x0000fe00 */
+#define XB_CTRL_IBUF_LEVEL_MSK 0x0e000000 /* input packet buffer
+ level */
+#define XB_CTRL_8BIT_MODE 0x01000000 /* force link into 8
+ bit mode */
+#define XB_CTRL_BAD_LLP_PKT 0x00800000 /* force bad LLP
+ packet */
+#define XB_CTRL_WIDGET_CR_MSK 0x007c0000 /* LLP widget credit
+ mask */
+#define XB_CTRL_WIDGET_CR_SHFT 18 /* LLP widget credit
+ shift */
+#define XB_CTRL_ILLEGAL_DST_IE 0x00020000 /* illegal destination
+ */
+#define XB_CTRL_OALLOC_IBUF_IE 0x00010000 /* overallocated input
+ buffer */
+/* reserved: 0x0000fe00 */
#define XB_CTRL_BNDWDTH_ALLOC_IE 0x00000100 /* bandwidth alloc */
#define XB_CTRL_RCV_CNT_OFLOW_IE 0x00000080 /* rcv retry overflow */
#define XB_CTRL_XMT_CNT_OFLOW_IE 0x00000040 /* xmt retry overflow */
#define XB_CTRL_XMT_MAX_RTRY_IE 0x00000020 /* max transmit retry */
#define XB_CTRL_RCV_IE 0x00000010 /* receive */
#define XB_CTRL_XMT_RTRY_IE 0x00000008 /* transmit retry */
- /* reserved: 0x00000004 */
-#define XB_CTRL_MAXREQ_TOUT_IE 0x00000002 /* maximum request timeout */
+/* reserved: 0x00000004 */
+#define XB_CTRL_MAXREQ_TOUT_IE 0x00000002 /* maximum request
+ timeout */
#define XB_CTRL_SRC_TOUT_IE 0x00000001 /* source timeout */
/* link_status(x) */
#define XB_STAT_LINKALIVE XB_CTRL_LINKALIVE_IE
- /* reserved: 0x7ff80000 */
+/* reserved: 0x7ff80000 */
#define XB_STAT_MULTI_ERR 0x00040000 /* multi error */
#define XB_STAT_ILLEGAL_DST_ERR XB_CTRL_ILLEGAL_DST_IE
#define XB_STAT_OALLOC_IBUF_ERR XB_CTRL_OALLOC_IBUF_IE
@@ -211,7 +220,7 @@ typedef volatile struct xbow_s {
#define XB_STAT_XMT_MAX_RTRY_ERR XB_CTRL_XMT_MAX_RTRY_IE
#define XB_STAT_RCV_ERR XB_CTRL_RCV_IE
#define XB_STAT_XMT_RTRY_ERR XB_CTRL_XMT_RTRY_IE
- /* reserved: 0x00000004 */
+/* reserved: 0x00000004 */
#define XB_STAT_MAXREQ_TOUT_ERR XB_CTRL_MAXREQ_TOUT_IE
#define XB_STAT_SRC_TOUT_ERR XB_CTRL_SRC_TOUT_IE
@@ -222,7 +231,7 @@ typedef volatile struct xbow_s {
#define XB_AUX_LINKFAIL_RST_BAD 0x00000040
#define XB_AUX_STAT_PRESENT 0x00000020
#define XB_AUX_STAT_PORT_WIDTH 0x00000010
- /* reserved: 0x0000000f */
+/* reserved: 0x0000000f */
/*
* link_arb_upper/link_arb_lower(x), (reg) should be the link_arb_upper
@@ -238,7 +247,8 @@ typedef volatile struct xbow_s {
/* XBOW_WID_STAT */
#define XB_WID_STAT_LINK_INTR_SHFT (24)
#define XB_WID_STAT_LINK_INTR_MASK (0xFF << XB_WID_STAT_LINK_INTR_SHFT)
-#define XB_WID_STAT_LINK_INTR(x) (0x1 << (((x)&7) + XB_WID_STAT_LINK_INTR_SHFT))
+#define XB_WID_STAT_LINK_INTR(x) \
+ (0x1 << (((x)&7) + XB_WID_STAT_LINK_INTR_SHFT))
#define XB_WID_STAT_WIDGET0_INTR 0x00800000
#define XB_WID_STAT_SRCID_MASK 0x000003c0 /* Xbridge only */
#define XB_WID_STAT_REG_ACC_ERR 0x00000020
@@ -264,7 +274,7 @@ typedef volatile struct xbow_s {
#define XXBOW_WIDGET_PART_NUM 0xd000 /* Xbridge */
#define XBOW_WIDGET_MFGR_NUM 0x0
#define XXBOW_WIDGET_MFGR_NUM 0x0
-#define PXBOW_WIDGET_PART_NUM 0xd100 /* PIC */
+#define PXBOW_WIDGET_PART_NUM 0xd100 /* PIC */
#define XBOW_REV_1_0 0x1 /* xbow rev 1.0 is "1" */
#define XBOW_REV_1_1 0x2 /* xbow rev 1.1 is "2" */
@@ -279,13 +289,13 @@ typedef volatile struct xbow_s {
#define XBOW_WID_ARB_RELOAD_INT 0x3f /* GBR reload interval */
#define IS_XBRIDGE_XBOW(wid) \
- (XWIDGET_PART_NUM(wid) == XXBOW_WIDGET_PART_NUM && \
- XWIDGET_MFG_NUM(wid) == XXBOW_WIDGET_MFGR_NUM)
+ (XWIDGET_PART_NUM(wid) == XXBOW_WIDGET_PART_NUM && \
+ XWIDGET_MFG_NUM(wid) == XXBOW_WIDGET_MFGR_NUM)
#define IS_PIC_XBOW(wid) \
- (XWIDGET_PART_NUM(wid) == PXBOW_WIDGET_PART_NUM && \
- XWIDGET_MFG_NUM(wid) == XXBOW_WIDGET_MFGR_NUM)
+ (XWIDGET_PART_NUM(wid) == PXBOW_WIDGET_PART_NUM && \
+ XWIDGET_MFG_NUM(wid) == XXBOW_WIDGET_MFGR_NUM)
#define XBOW_WAR_ENABLED(pv, widid) ((1 << XWIDGET_REV_NUM(widid)) & pv)
-#endif /* _ASM_IA64_SN_XTALK_XBOW_H */
+#endif /* _ASM_IA64_SN_XTALK_XBOW_H */
diff --git a/arch/ia64/sn/include/xtalk/xwidgetdev.h b/arch/ia64/sn/include/xtalk/xwidgetdev.h
index c5f4bc5cc033..2800eda0fd68 100644
--- a/arch/ia64/sn/include/xtalk/xwidgetdev.h
+++ b/arch/ia64/sn/include/xtalk/xwidgetdev.h
@@ -25,28 +25,28 @@
/* widget configuration registers */
struct widget_cfg{
- uint32_t w_id; /* 0x04 */
- uint32_t w_pad_0; /* 0x00 */
- uint32_t w_status; /* 0x0c */
- uint32_t w_pad_1; /* 0x08 */
- uint32_t w_err_upper_addr; /* 0x14 */
- uint32_t w_pad_2; /* 0x10 */
- uint32_t w_err_lower_addr; /* 0x1c */
- uint32_t w_pad_3; /* 0x18 */
- uint32_t w_control; /* 0x24 */
- uint32_t w_pad_4; /* 0x20 */
- uint32_t w_req_timeout; /* 0x2c */
- uint32_t w_pad_5; /* 0x28 */
- uint32_t w_intdest_upper_addr; /* 0x34 */
- uint32_t w_pad_6; /* 0x30 */
- uint32_t w_intdest_lower_addr; /* 0x3c */
- uint32_t w_pad_7; /* 0x38 */
- uint32_t w_err_cmd_word; /* 0x44 */
- uint32_t w_pad_8; /* 0x40 */
- uint32_t w_llp_cfg; /* 0x4c */
- uint32_t w_pad_9; /* 0x48 */
- uint32_t w_tflush; /* 0x54 */
- uint32_t w_pad_10; /* 0x50 */
+ u32 w_id; /* 0x04 */
+ u32 w_pad_0; /* 0x00 */
+ u32 w_status; /* 0x0c */
+ u32 w_pad_1; /* 0x08 */
+ u32 w_err_upper_addr; /* 0x14 */
+ u32 w_pad_2; /* 0x10 */
+ u32 w_err_lower_addr; /* 0x1c */
+ u32 w_pad_3; /* 0x18 */
+ u32 w_control; /* 0x24 */
+ u32 w_pad_4; /* 0x20 */
+ u32 w_req_timeout; /* 0x2c */
+ u32 w_pad_5; /* 0x28 */
+ u32 w_intdest_upper_addr; /* 0x34 */
+ u32 w_pad_6; /* 0x30 */
+ u32 w_intdest_lower_addr; /* 0x3c */
+ u32 w_pad_7; /* 0x38 */
+ u32 w_err_cmd_word; /* 0x44 */
+ u32 w_pad_8; /* 0x40 */
+ u32 w_llp_cfg; /* 0x4c */
+ u32 w_pad_9; /* 0x48 */
+ u32 w_tflush; /* 0x54 */
+ u32 w_pad_10; /* 0x50 */
};
/*
@@ -63,7 +63,7 @@ struct xwidget_info{
struct xwidget_hwid xwi_hwid; /* Widget Identification */
char xwi_masterxid; /* Hub's Widget Port Number */
void *xwi_hubinfo; /* Hub's provider private info */
- uint64_t *xwi_hub_provider; /* prom provider functions */
+ u64 *xwi_hub_provider; /* prom provider functions */
void *xwi_vertex;
};
diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c
index 258d9d7aff98..233d55115d33 100644
--- a/arch/ia64/sn/kernel/io_init.c
+++ b/arch/ia64/sn/kernel/io_init.c
@@ -132,8 +132,8 @@ static inline u64 sal_get_pcibus_info(u64 segment, u64 busnum, u64 address)
* Retrieve the pci device information given the bus and device|function number.
*/
static inline u64
-sal_get_pcidev_info(u64 segment, u64 bus_number, u64 devfn, u64 pci_dev,
- u64 sn_irq_info)
+sal_get_pcidev_info(u64 segment, u64 bus_number, u64 devfn, u64 pci_dev,
+ u64 sn_irq_info)
{
struct ia64_sal_retval ret_stuff;
ret_stuff.status = 0;
@@ -141,7 +141,7 @@ sal_get_pcidev_info(u64 segment, u64 bus_number, u64 devfn, u64 pci_dev,
SAL_CALL_NOLOCK(ret_stuff,
(u64) SN_SAL_IOIF_GET_PCIDEV_INFO,
- (u64) segment, (u64) bus_number, (u64) devfn,
+ (u64) segment, (u64) bus_number, (u64) devfn,
(u64) pci_dev,
sn_irq_info, 0, 0);
return ret_stuff.v0;
@@ -268,7 +268,7 @@ static void sn_fixup_ionodes(void)
*/
static void
sn_pci_window_fixup(struct pci_dev *dev, unsigned int count,
- int64_t * pci_addrs)
+ s64 * pci_addrs)
{
struct pci_controller *controller = PCI_CONTROLLER(dev->bus);
unsigned int i;
@@ -328,7 +328,7 @@ void sn_pci_fixup_slot(struct pci_dev *dev)
struct pci_bus *host_pci_bus;
struct pci_dev *host_pci_dev;
struct pcidev_info *pcidev_info;
- int64_t pci_addrs[PCI_ROM_RESOURCE + 1];
+ s64 pci_addrs[PCI_ROM_RESOURCE + 1];
struct sn_irq_info *sn_irq_info;
unsigned long size;
unsigned int bus_no, devfn;
diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c
index 01d18b7b5bb3..ec37084bdc17 100644
--- a/arch/ia64/sn/kernel/irq.c
+++ b/arch/ia64/sn/kernel/irq.c
@@ -28,7 +28,7 @@ extern int sn_ioif_inited;
static struct list_head **sn_irq_lh;
static spinlock_t sn_irq_info_lock = SPIN_LOCK_UNLOCKED; /* non-IRQ lock */
-static inline uint64_t sn_intr_alloc(nasid_t local_nasid, int local_widget,
+static inline u64 sn_intr_alloc(nasid_t local_nasid, int local_widget,
u64 sn_irq_info,
int req_irq, nasid_t req_nasid,
int req_slice)
@@ -123,7 +123,7 @@ static void sn_set_affinity_irq(unsigned int irq, cpumask_t mask)
list_for_each_entry_safe(sn_irq_info, sn_irq_info_safe,
sn_irq_lh[irq], list) {
- uint64_t bridge;
+ u64 bridge;
int local_widget, status;
nasid_t local_nasid;
struct sn_irq_info *new_irq_info;
@@ -134,7 +134,7 @@ static void sn_set_affinity_irq(unsigned int irq, cpumask_t mask)
break;
memcpy(new_irq_info, sn_irq_info, sizeof(struct sn_irq_info));
- bridge = (uint64_t) new_irq_info->irq_bridge;
+ bridge = (u64) new_irq_info->irq_bridge;
if (!bridge) {
kfree(new_irq_info);
break; /* irq is not a device interrupt */
@@ -349,10 +349,10 @@ static void force_interrupt(int irq)
*/
static void sn_check_intr(int irq, struct sn_irq_info *sn_irq_info)
{
- uint64_t regval;
+ u64 regval;
int irr_reg_num;
int irr_bit;
- uint64_t irr_reg;
+ u64 irr_reg;
struct pcidev_info *pcidev_info;
struct pcibus_info *pcibus_info;
diff --git a/arch/ia64/sn/kernel/tiocx.c b/arch/ia64/sn/kernel/tiocx.c
index 6a7939b16a1c..d263d3e8fbb9 100644
--- a/arch/ia64/sn/kernel/tiocx.c
+++ b/arch/ia64/sn/kernel/tiocx.c
@@ -245,7 +245,7 @@ static int cx_device_reload(struct cx_dev *cx_dev)
cx_dev->bt);
}
-static inline uint64_t tiocx_intr_alloc(nasid_t nasid, int widget,
+static inline u64 tiocx_intr_alloc(nasid_t nasid, int widget,
u64 sn_irq_info,
int req_irq, nasid_t req_nasid,
int req_slice)
@@ -302,7 +302,7 @@ struct sn_irq_info *tiocx_irq_alloc(nasid_t nasid, int widget, int irq,
void tiocx_irq_free(struct sn_irq_info *sn_irq_info)
{
- uint64_t bridge = (uint64_t) sn_irq_info->irq_bridge;
+ u64 bridge = (u64) sn_irq_info->irq_bridge;
nasid_t nasid = NASID_GET(bridge);
int widget;
@@ -313,12 +313,12 @@ void tiocx_irq_free(struct sn_irq_info *sn_irq_info)
}
}
-uint64_t tiocx_dma_addr(uint64_t addr)
+u64 tiocx_dma_addr(u64 addr)
{
return PHYS_TO_TIODMA(addr);
}
-uint64_t tiocx_swin_base(int nasid)
+u64 tiocx_swin_base(int nasid)
{
return TIO_SWIN_BASE(nasid, TIOCX_CORELET);
}
@@ -335,8 +335,8 @@ EXPORT_SYMBOL(tiocx_swin_base);
static void tio_conveyor_set(nasid_t nasid, int enable_flag)
{
- uint64_t ice_frz;
- uint64_t disable_cb = (1ull << 61);
+ u64 ice_frz;
+ u64 disable_cb = (1ull << 61);
if (!(nasid & 1))
return;
@@ -388,7 +388,7 @@ static int is_fpga_tio(int nasid, int *bt)
static int bitstream_loaded(nasid_t nasid)
{
- uint64_t cx_credits;
+ u64 cx_credits;
cx_credits = REMOTE_HUB_L(nasid, TIO_ICE_PMI_TX_DYN_CREDIT_STAT_CB3);
cx_credits &= TIO_ICE_PMI_TX_DYN_CREDIT_STAT_CB3_CREDIT_CNT_MASK;
@@ -404,14 +404,14 @@ static int tiocx_reload(struct cx_dev *cx_dev)
nasid_t nasid = cx_dev->cx_id.nasid;
if (bitstream_loaded(nasid)) {
- uint64_t cx_id;
+ u64 cx_id;
int rv;
rv = ia64_sn_sysctl_tio_clock_reset(nasid);
if (rv) {
printk(KERN_ALERT "CX port JTAG reset failed.\n");
} else {
- cx_id = *(volatile uint64_t *)
+ cx_id = *(volatile u64 *)
(TIO_SWIN_BASE(nasid, TIOCX_CORELET) +
WIDGET_ID);
part_num = XWIDGET_PART_NUM(cx_id);
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_ate.c b/arch/ia64/sn/pci/pcibr/pcibr_ate.c
index d1647b863e61..aa3fa5152a32 100644
--- a/arch/ia64/sn/pci/pcibr/pcibr_ate.c
+++ b/arch/ia64/sn/pci/pcibr/pcibr_ate.c
@@ -18,10 +18,10 @@ int pcibr_invalidate_ate = 0; /* by default don't invalidate ATE on free */
* mark_ate: Mark the ate as either free or inuse.
*/
static void mark_ate(struct ate_resource *ate_resource, int start, int number,
- uint64_t value)
+ u64 value)
{
- uint64_t *ate = ate_resource->ate;
+ u64 *ate = ate_resource->ate;
int index;
int length = 0;
@@ -38,7 +38,7 @@ static int find_free_ate(struct ate_resource *ate_resource, int start,
int count)
{
- uint64_t *ate = ate_resource->ate;
+ u64 *ate = ate_resource->ate;
int index;
int start_free;
@@ -119,7 +119,7 @@ static inline int alloc_ate_resource(struct ate_resource *ate_resource,
int pcibr_ate_alloc(struct pcibus_info *pcibus_info, int count)
{
int status = 0;
- uint64_t flag;
+ u64 flag;
flag = pcibr_lock(pcibus_info);
status = alloc_ate_resource(&pcibus_info->pbi_int_ate_resource, count);
@@ -139,7 +139,7 @@ int pcibr_ate_alloc(struct pcibus_info *pcibus_info, int count)
* Setup an Address Translation Entry as specified. Use either the Bridge
* internal maps or the external map RAM, as appropriate.
*/
-static inline uint64_t *pcibr_ate_addr(struct pcibus_info *pcibus_info,
+static inline u64 *pcibr_ate_addr(struct pcibus_info *pcibus_info,
int ate_index)
{
if (ate_index < pcibus_info->pbi_int_ate_size) {
@@ -153,7 +153,7 @@ static inline uint64_t *pcibr_ate_addr(struct pcibus_info *pcibus_info,
*/
void inline
ate_write(struct pcibus_info *pcibus_info, int ate_index, int count,
- volatile uint64_t ate)
+ volatile u64 ate)
{
while (count-- > 0) {
if (ate_index < pcibus_info->pbi_int_ate_size) {
@@ -171,9 +171,9 @@ ate_write(struct pcibus_info *pcibus_info, int ate_index, int count,
void pcibr_ate_free(struct pcibus_info *pcibus_info, int index)
{
- volatile uint64_t ate;
+ volatile u64 ate;
int count;
- uint64_t flags;
+ u64 flags;
if (pcibr_invalidate_ate) {
/* For debugging purposes, clear the valid bit in the ATE */
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_dma.c b/arch/ia64/sn/pci/pcibr/pcibr_dma.c
index e68332d93171..54ce5b7ceed2 100644
--- a/arch/ia64/sn/pci/pcibr/pcibr_dma.c
+++ b/arch/ia64/sn/pci/pcibr/pcibr_dma.c
@@ -41,21 +41,21 @@ extern int sn_ioif_inited;
static dma_addr_t
pcibr_dmamap_ate32(struct pcidev_info *info,
- uint64_t paddr, size_t req_size, uint64_t flags)
+ u64 paddr, size_t req_size, u64 flags)
{
struct pcidev_info *pcidev_info = info->pdi_host_pcidev_info;
struct pcibus_info *pcibus_info = (struct pcibus_info *)pcidev_info->
pdi_pcibus_info;
- uint8_t internal_device = (PCI_SLOT(pcidev_info->pdi_host_pcidev_info->
+ u8 internal_device = (PCI_SLOT(pcidev_info->pdi_host_pcidev_info->
pdi_linux_pcidev->devfn)) - 1;
int ate_count;
int ate_index;
- uint64_t ate_flags = flags | PCI32_ATE_V;
- uint64_t ate;
- uint64_t pci_addr;
- uint64_t xio_addr;
- uint64_t offset;
+ u64 ate_flags = flags | PCI32_ATE_V;
+ u64 ate;
+ u64 pci_addr;
+ u64 xio_addr;
+ u64 offset;
/* PIC in PCI-X mode does not supports 32bit PageMap mode */
if (IS_PIC_SOFT(pcibus_info) && IS_PCIX(pcibus_info)) {
@@ -109,12 +109,12 @@ pcibr_dmamap_ate32(struct pcidev_info *info,
}
static dma_addr_t
-pcibr_dmatrans_direct64(struct pcidev_info * info, uint64_t paddr,
- uint64_t dma_attributes)
+pcibr_dmatrans_direct64(struct pcidev_info * info, u64 paddr,
+ u64 dma_attributes)
{
struct pcibus_info *pcibus_info = (struct pcibus_info *)
((info->pdi_host_pcidev_info)->pdi_pcibus_info);
- uint64_t pci_addr;
+ u64 pci_addr;
/* Translate to Crosstalk View of Physical Address */
pci_addr = (IS_PIC_SOFT(pcibus_info) ? PHYS_TO_DMA(paddr) :
@@ -127,7 +127,7 @@ pcibr_dmatrans_direct64(struct pcidev_info * info, uint64_t paddr,
/* Handle Bridge Chipset differences */
if (IS_PIC_SOFT(pcibus_info)) {
pci_addr |=
- ((uint64_t) pcibus_info->
+ ((u64) pcibus_info->
pbi_hub_xid << PIC_PCI64_ATTR_TARG_SHFT);
} else
pci_addr |= TIOCP_PCI64_CMDTYPE_MEM;
@@ -142,17 +142,17 @@ pcibr_dmatrans_direct64(struct pcidev_info * info, uint64_t paddr,
static dma_addr_t
pcibr_dmatrans_direct32(struct pcidev_info * info,
- uint64_t paddr, size_t req_size, uint64_t flags)
+ u64 paddr, size_t req_size, u64 flags)
{
struct pcidev_info *pcidev_info = info->pdi_host_pcidev_info;
struct pcibus_info *pcibus_info = (struct pcibus_info *)pcidev_info->
pdi_pcibus_info;
- uint64_t xio_addr;
+ u64 xio_addr;
- uint64_t xio_base;
- uint64_t offset;
- uint64_t endoff;
+ u64 xio_base;
+ u64 offset;
+ u64 endoff;
if (IS_PCIX(pcibus_info)) {
return 0;
@@ -209,14 +209,14 @@ pcibr_dma_unmap(struct pci_dev *hwdev, dma_addr_t dma_handle, int direction)
* unlike the PIC Device(x) Write Request Buffer Flush register.
*/
-void sn_dma_flush(uint64_t addr)
+void sn_dma_flush(u64 addr)
{
nasid_t nasid;
int is_tio;
int wid_num;
int i, j;
- uint64_t flags;
- uint64_t itte;
+ u64 flags;
+ u64 itte;
struct hubdev_info *hubinfo;
volatile struct sn_flush_device_kernel *p;
volatile struct sn_flush_device_common *common;
@@ -299,8 +299,8 @@ void sn_dma_flush(uint64_t addr)
* If CE ever needs the sn_dma_flush mechanism, we will have
* to account for that here and in tioce_bus_fixup().
*/
- uint32_t tio_id = HUB_L(TIO_IOSPACE_ADDR(nasid, TIO_NODE_ID));
- uint32_t revnum = XWIDGET_PART_REV_NUM(tio_id);
+ u32 tio_id = HUB_L(TIO_IOSPACE_ADDR(nasid, TIO_NODE_ID));
+ u32 revnum = XWIDGET_PART_REV_NUM(tio_id);
/* TIOCP BRINGUP WAR (PV907516): Don't write buffer flush reg */
if ((1 << XWIDGET_PART_REV_NUM_REV(revnum)) & PV907516) {
@@ -315,7 +315,7 @@ void sn_dma_flush(uint64_t addr)
*common->sfdl_flush_addr = 0;
/* force an interrupt. */
- *(volatile uint32_t *)(common->sfdl_force_int_addr) = 1;
+ *(volatile u32 *)(common->sfdl_force_int_addr) = 1;
/* wait for the interrupt to come back. */
while (*(common->sfdl_flush_addr) != 0x10f)
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_provider.c b/arch/ia64/sn/pci/pcibr/pcibr_provider.c
index e328e948175d..77a1262751d3 100644
--- a/arch/ia64/sn/pci/pcibr/pcibr_provider.c
+++ b/arch/ia64/sn/pci/pcibr/pcibr_provider.c
@@ -23,7 +23,7 @@ int
sal_pcibr_slot_enable(struct pcibus_info *soft, int device, void *resp)
{
struct ia64_sal_retval ret_stuff;
- uint64_t busnum;
+ u64 busnum;
ret_stuff.status = 0;
ret_stuff.v0 = 0;
@@ -40,7 +40,7 @@ sal_pcibr_slot_disable(struct pcibus_info *soft, int device, int action,
void *resp)
{
struct ia64_sal_retval ret_stuff;
- uint64_t busnum;
+ u64 busnum;
ret_stuff.status = 0;
ret_stuff.v0 = 0;
@@ -56,7 +56,7 @@ sal_pcibr_slot_disable(struct pcibus_info *soft, int device, int action,
static int sal_pcibr_error_interrupt(struct pcibus_info *soft)
{
struct ia64_sal_retval ret_stuff;
- uint64_t busnum;
+ u64 busnum;
int segment;
ret_stuff.status = 0;
ret_stuff.v0 = 0;
@@ -159,9 +159,9 @@ pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont
/* Setup the PMU ATE map */
soft->pbi_int_ate_resource.lowest_free_index = 0;
soft->pbi_int_ate_resource.ate =
- kmalloc(soft->pbi_int_ate_size * sizeof(uint64_t), GFP_KERNEL);
+ kmalloc(soft->pbi_int_ate_size * sizeof(u64), GFP_KERNEL);
memset(soft->pbi_int_ate_resource.ate, 0,
- (soft->pbi_int_ate_size * sizeof(uint64_t)));
+ (soft->pbi_int_ate_size * sizeof(u64)));
if (prom_bussoft->bs_asic_type == PCIIO_ASIC_TYPE_TIOCP) {
/* TIO PCI Bridge: find nearest node with CPUs */
@@ -203,7 +203,7 @@ void pcibr_target_interrupt(struct sn_irq_info *sn_irq_info)
struct pcidev_info *pcidev_info;
struct pcibus_info *pcibus_info;
int bit = sn_irq_info->irq_int_bit;
- uint64_t xtalk_addr = sn_irq_info->irq_xtalkaddr;
+ u64 xtalk_addr = sn_irq_info->irq_xtalkaddr;
pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
if (pcidev_info) {
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_reg.c b/arch/ia64/sn/pci/pcibr/pcibr_reg.c
index 79fdb91d7259..8b8bbd51d433 100644
--- a/arch/ia64/sn/pci/pcibr/pcibr_reg.c
+++ b/arch/ia64/sn/pci/pcibr/pcibr_reg.c
@@ -23,7 +23,7 @@ union br_ptr {
/*
* Control Register Access -- Read/Write 0000_0020
*/
-void pcireg_control_bit_clr(struct pcibus_info *pcibus_info, uint64_t bits)
+void pcireg_control_bit_clr(struct pcibus_info *pcibus_info, u64 bits)
{
union br_ptr __iomem *ptr = (union br_ptr __iomem *)pcibus_info->pbi_buscommon.bs_base;
@@ -43,7 +43,7 @@ void pcireg_control_bit_clr(struct pcibus_info *pcibus_info, uint64_t bits)
}
}
-void pcireg_control_bit_set(struct pcibus_info *pcibus_info, uint64_t bits)
+void pcireg_control_bit_set(struct pcibus_info *pcibus_info, u64 bits)
{
union br_ptr __iomem *ptr = (union br_ptr __iomem *)pcibus_info->pbi_buscommon.bs_base;
@@ -66,10 +66,10 @@ void pcireg_control_bit_set(struct pcibus_info *pcibus_info, uint64_t bits)
/*
* PCI/PCIX Target Flush Register Access -- Read Only 0000_0050
*/
-uint64_t pcireg_tflush_get(struct pcibus_info *pcibus_info)
+u64 pcireg_tflush_get(struct pcibus_info *pcibus_info)
{
union br_ptr __iomem *ptr = (union br_ptr __iomem *)pcibus_info->pbi_buscommon.bs_base;
- uint64_t ret = 0;
+ u64 ret = 0;
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
@@ -96,10 +96,10 @@ uint64_t pcireg_tflush_get(struct pcibus_info *pcibus_info)
/*
* Interrupt Status Register Access -- Read Only 0000_0100
*/
-uint64_t pcireg_intr_status_get(struct pcibus_info * pcibus_info)
+u64 pcireg_intr_status_get(struct pcibus_info * pcibus_info)
{
union br_ptr __iomem *ptr = (union br_ptr __iomem *)pcibus_info->pbi_buscommon.bs_base;
- uint64_t ret = 0;
+ u64 ret = 0;
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
@@ -121,7 +121,7 @@ uint64_t pcireg_intr_status_get(struct pcibus_info * pcibus_info)
/*
* Interrupt Enable Register Access -- Read/Write 0000_0108
*/
-void pcireg_intr_enable_bit_clr(struct pcibus_info *pcibus_info, uint64_t bits)
+void pcireg_intr_enable_bit_clr(struct pcibus_info *pcibus_info, u64 bits)
{
union br_ptr __iomem *ptr = (union br_ptr __iomem *)pcibus_info->pbi_buscommon.bs_base;
@@ -141,7 +141,7 @@ void pcireg_intr_enable_bit_clr(struct pcibus_info *pcibus_info, uint64_t bits)
}
}
-void pcireg_intr_enable_bit_set(struct pcibus_info *pcibus_info, uint64_t bits)
+void pcireg_intr_enable_bit_set(struct pcibus_info *pcibus_info, u64 bits)
{
union br_ptr __iomem *ptr = (union br_ptr __iomem *)pcibus_info->pbi_buscommon.bs_base;
@@ -165,7 +165,7 @@ void pcireg_intr_enable_bit_set(struct pcibus_info *pcibus_info, uint64_t bits)
* Intr Host Address Register (int_addr) -- Read/Write 0000_0130 - 0000_0168
*/
void pcireg_intr_addr_addr_set(struct pcibus_info *pcibus_info, int int_n,
- uint64_t addr)
+ u64 addr)
{
union br_ptr __iomem *ptr = (union br_ptr __iomem *)pcibus_info->pbi_buscommon.bs_base;
@@ -217,10 +217,10 @@ void pcireg_force_intr_set(struct pcibus_info *pcibus_info, int int_n)
/*
* Device(x) Write Buffer Flush Reg Access -- Read Only 0000_0240 - 0000_0258
*/
-uint64_t pcireg_wrb_flush_get(struct pcibus_info *pcibus_info, int device)
+u64 pcireg_wrb_flush_get(struct pcibus_info *pcibus_info, int device)
{
union br_ptr __iomem *ptr = (union br_ptr __iomem *)pcibus_info->pbi_buscommon.bs_base;
- uint64_t ret = 0;
+ u64 ret = 0;
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
@@ -242,7 +242,7 @@ uint64_t pcireg_wrb_flush_get(struct pcibus_info *pcibus_info, int device)
}
void pcireg_int_ate_set(struct pcibus_info *pcibus_info, int ate_index,
- uint64_t val)
+ u64 val)
{
union br_ptr __iomem *ptr = (union br_ptr __iomem *)pcibus_info->pbi_buscommon.bs_base;
@@ -262,10 +262,10 @@ void pcireg_int_ate_set(struct pcibus_info *pcibus_info, int ate_index,
}
}
-uint64_t __iomem *pcireg_int_ate_addr(struct pcibus_info *pcibus_info, int ate_index)
+u64 __iomem *pcireg_int_ate_addr(struct pcibus_info *pcibus_info, int ate_index)
{
union br_ptr __iomem *ptr = (union br_ptr __iomem *)pcibus_info->pbi_buscommon.bs_base;
- uint64_t __iomem *ret = NULL;
+ u64 __iomem *ret = NULL;
if (pcibus_info) {
switch (pcibus_info->pbi_bridge_type) {
diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c
index 27aa1842dacc..7571a4025529 100644
--- a/arch/ia64/sn/pci/tioca_provider.c
+++ b/arch/ia64/sn/pci/tioca_provider.c
@@ -16,7 +16,7 @@
#include <asm/sn/pcibus_provider_defs.h>
#include <asm/sn/tioca_provider.h>
-uint32_t tioca_gart_found;
+u32 tioca_gart_found;
EXPORT_SYMBOL(tioca_gart_found); /* used by agp-sgi */
LIST_HEAD(tioca_list);
@@ -34,8 +34,8 @@ static int tioca_gart_init(struct tioca_kernel *);
static int
tioca_gart_init(struct tioca_kernel *tioca_kern)
{
- uint64_t ap_reg;
- uint64_t offset;
+ u64 ap_reg;
+ u64 offset;
struct page *tmp;
struct tioca_common *tioca_common;
struct tioca __iomem *ca_base;
@@ -214,7 +214,7 @@ void
tioca_fastwrite_enable(struct tioca_kernel *tioca_kern)
{
int cap_ptr;
- uint32_t reg;
+ u32 reg;
struct tioca __iomem *tioca_base;
struct pci_dev *pdev;
struct tioca_common *common;
@@ -276,7 +276,7 @@ EXPORT_SYMBOL(tioca_fastwrite_enable); /* used by agp-sgi */
* We will always use 0x1
* 55:55 - Swap bytes Currently unused
*/
-static uint64_t
+static u64
tioca_dma_d64(unsigned long paddr)
{
dma_addr_t bus_addr;
@@ -318,15 +318,15 @@ tioca_dma_d64(unsigned long paddr)
* and so a given CA can only directly target nodes in the range
* xxx - xxx+255.
*/
-static uint64_t
-tioca_dma_d48(struct pci_dev *pdev, uint64_t paddr)
+static u64
+tioca_dma_d48(struct pci_dev *pdev, u64 paddr)
{
struct tioca_common *tioca_common;
struct tioca __iomem *ca_base;
- uint64_t ct_addr;
+ u64 ct_addr;
dma_addr_t bus_addr;
- uint32_t node_upper;
- uint64_t agp_dma_extn;
+ u32 node_upper;
+ u64 agp_dma_extn;
struct pcidev_info *pcidev_info = SN_PCIDEV_INFO(pdev);
tioca_common = (struct tioca_common *)pcidev_info->pdi_pcibus_info;
@@ -367,10 +367,10 @@ tioca_dma_d48(struct pci_dev *pdev, uint64_t paddr)
* dma_addr_t is guarenteed to be contiguous in CA bus space.
*/
static dma_addr_t
-tioca_dma_mapped(struct pci_dev *pdev, uint64_t paddr, size_t req_size)
+tioca_dma_mapped(struct pci_dev *pdev, u64 paddr, size_t req_size)
{
int i, ps, ps_shift, entry, entries, mapsize, last_entry;
- uint64_t xio_addr, end_xio_addr;
+ u64 xio_addr, end_xio_addr;
struct tioca_common *tioca_common;
struct tioca_kernel *tioca_kern;
dma_addr_t bus_addr = 0;
@@ -514,10 +514,10 @@ tioca_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
* The mapping mode used is based on the devices dma_mask. As a last resort
* use the GART mapped mode.
*/
-static uint64_t
-tioca_dma_map(struct pci_dev *pdev, uint64_t paddr, size_t byte_count)
+static u64
+tioca_dma_map(struct pci_dev *pdev, u64 paddr, size_t byte_count)
{
- uint64_t mapaddr;
+ u64 mapaddr;
/*
* If card is 64 or 48 bit addresable, use a direct mapping. 32
@@ -554,8 +554,8 @@ tioca_error_intr_handler(int irq, void *arg, struct pt_regs *pt)
{
struct tioca_common *soft = arg;
struct ia64_sal_retval ret_stuff;
- uint64_t segment;
- uint64_t busnum;
+ u64 segment;
+ u64 busnum;
ret_stuff.status = 0;
ret_stuff.v0 = 0;
@@ -620,7 +620,7 @@ tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *cont
INIT_LIST_HEAD(&tioca_kern->ca_dmamaps);
tioca_kern->ca_closest_node =
nasid_to_cnodeid(tioca_common->ca_closest_nasid);
- tioca_common->ca_kernel_private = (uint64_t) tioca_kern;
+ tioca_common->ca_kernel_private = (u64) tioca_kern;
bus = pci_find_bus(tioca_common->ca_common.bs_persist_segment,
tioca_common->ca_common.bs_persist_busnum);
diff --git a/arch/ia64/sn/pci/tioce_provider.c b/arch/ia64/sn/pci/tioce_provider.c
index dda196c9e324..e52831ed93eb 100644
--- a/arch/ia64/sn/pci/tioce_provider.c
+++ b/arch/ia64/sn/pci/tioce_provider.c
@@ -81,10 +81,10 @@
* 61 - 0 since this is not an MSI transaction
* 60:54 - reserved, MBZ
*/
-static uint64_t
+static u64
tioce_dma_d64(unsigned long ct_addr)
{
- uint64_t bus_addr;
+ u64 bus_addr;
bus_addr = ct_addr | (1UL << 63);
@@ -141,9 +141,9 @@ pcidev_to_tioce(struct pci_dev *pdev, struct tioce **base,
* length, and if enough resources exist, fill in the ATE's and construct a
* tioce_dmamap struct to track the mapping.
*/
-static uint64_t
+static u64
tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port,
- uint64_t ct_addr, int len)
+ u64 ct_addr, int len)
{
int i;
int j;
@@ -152,11 +152,11 @@ tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port,
int entries;
int nates;
int pagesize;
- uint64_t *ate_shadow;
- uint64_t *ate_reg;
- uint64_t addr;
+ u64 *ate_shadow;
+ u64 *ate_reg;
+ u64 addr;
struct tioce *ce_mmr;
- uint64_t bus_base;
+ u64 bus_base;
struct tioce_dmamap *map;
ce_mmr = (struct tioce *)ce_kern->ce_common->ce_pcibus.bs_base;
@@ -224,7 +224,7 @@ tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port,
addr = ct_addr;
for (j = 0; j < nates; j++) {
- uint64_t ate;
+ u64 ate;
ate = ATE_MAKE(addr, pagesize);
ate_shadow[i + j] = ate;
@@ -252,15 +252,15 @@ tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port,
*
* Map @paddr into 32-bit bus space of the CE associated with @pcidev_info.
*/
-static uint64_t
-tioce_dma_d32(struct pci_dev *pdev, uint64_t ct_addr)
+static u64
+tioce_dma_d32(struct pci_dev *pdev, u64 ct_addr)
{
int dma_ok;
int port;
struct tioce *ce_mmr;
struct tioce_kernel *ce_kern;
- uint64_t ct_upper;
- uint64_t ct_lower;
+ u64 ct_upper;
+ u64 ct_lower;
dma_addr_t bus_addr;
ct_upper = ct_addr & ~0x3fffffffUL;
@@ -269,7 +269,7 @@ tioce_dma_d32(struct pci_dev *pdev, uint64_t ct_addr)
pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port);
if (ce_kern->ce_port[port].dirmap_refcnt == 0) {
- uint64_t tmp;
+ u64 tmp;
ce_kern->ce_port[port].dirmap_shadow = ct_upper;
writeq(ct_upper, &ce_mmr->ce_ure_dir_map[port]);
@@ -295,10 +295,10 @@ tioce_dma_d32(struct pci_dev *pdev, uint64_t ct_addr)
* Given a TIOCE bus address, set the appropriate bit to indicate barrier
* attributes.
*/
-static uint64_t
-tioce_dma_barrier(uint64_t bus_addr, int on)
+static u64
+tioce_dma_barrier(u64 bus_addr, int on)
{
- uint64_t barrier_bit;
+ u64 barrier_bit;
/* barrier not supported in M40/M40S mode */
if (TIOCE_M40_ADDR(bus_addr) || TIOCE_M40S_ADDR(bus_addr))
@@ -351,7 +351,7 @@ tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
list_for_each_entry(map, &ce_kern->ce_dmamap_list,
ce_dmamap_list) {
- uint64_t last;
+ u64 last;
last = map->pci_start + map->nbytes - 1;
if (bus_addr >= map->pci_start && bus_addr <= last)
@@ -385,17 +385,17 @@ tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
* This is the main wrapper for mapping host physical pages to CE PCI space.
* The mapping mode used is based on the device's dma_mask.
*/
-static uint64_t
-tioce_do_dma_map(struct pci_dev *pdev, uint64_t paddr, size_t byte_count,
+static u64
+tioce_do_dma_map(struct pci_dev *pdev, u64 paddr, size_t byte_count,
int barrier)
{
unsigned long flags;
- uint64_t ct_addr;
- uint64_t mapaddr = 0;
+ u64 ct_addr;
+ u64 mapaddr = 0;
struct tioce_kernel *ce_kern;
struct tioce_dmamap *map;
int port;
- uint64_t dma_mask;
+ u64 dma_mask;
dma_mask = (barrier) ? pdev->dev.coherent_dma_mask : pdev->dma_mask;
@@ -425,7 +425,7 @@ tioce_do_dma_map(struct pci_dev *pdev, uint64_t paddr, size_t byte_count,
* address bits than this device can support.
*/
list_for_each_entry(map, &ce_kern->ce_dmamap_list, ce_dmamap_list) {
- uint64_t last;
+ u64 last;
last = map->ct_start + map->nbytes - 1;
if (ct_addr >= map->ct_start &&
@@ -501,8 +501,8 @@ dma_map_done:
* Simply call tioce_do_dma_map() to create a map with the barrier bit clear
* in the address.
*/
-static uint64_t
-tioce_dma(struct pci_dev *pdev, uint64_t paddr, size_t byte_count)
+static u64
+tioce_dma(struct pci_dev *pdev, u64 paddr, size_t byte_count)
{
return tioce_do_dma_map(pdev, paddr, byte_count, 0);
}
@@ -515,8 +515,8 @@ tioce_dma(struct pci_dev *pdev, uint64_t paddr, size_t byte_count)
*
* Simply call tioce_do_dma_map() to create a map with the barrier bit set
* in the address.
- */ static uint64_t
-tioce_dma_consistent(struct pci_dev *pdev, uint64_t paddr, size_t byte_count)
+ */ static u64
+tioce_dma_consistent(struct pci_dev *pdev, u64 paddr, size_t byte_count)
{
return tioce_do_dma_map(pdev, paddr, byte_count, 1);
}
@@ -551,7 +551,7 @@ tioce_error_intr_handler(int irq, void *arg, struct pt_regs *pt)
tioce_kern_init(struct tioce_common *tioce_common)
{
int i;
- uint32_t tmp;
+ u32 tmp;
struct tioce *tioce_mmr;
struct tioce_kernel *tioce_kern;
@@ -563,7 +563,7 @@ tioce_kern_init(struct tioce_common *tioce_common)
tioce_kern->ce_common = tioce_common;
spin_lock_init(&tioce_kern->ce_lock);
INIT_LIST_HEAD(&tioce_kern->ce_dmamap_list);
- tioce_common->ce_kernel_private = (uint64_t) tioce_kern;
+ tioce_common->ce_kernel_private = (u64) tioce_kern;
/*
* Determine the secondary bus number of the port2 logical PPB.
@@ -575,7 +575,7 @@ tioce_kern_init(struct tioce_common *tioce_common)
raw_pci_ops->read(tioce_common->ce_pcibus.bs_persist_segment,
tioce_common->ce_pcibus.bs_persist_busnum,
PCI_DEVFN(2, 0), PCI_SECONDARY_BUS, 1, &tmp);
- tioce_kern->ce_port1_secondary = (uint8_t) tmp;
+ tioce_kern->ce_port1_secondary = (u8) tmp;
/*
* Set PMU pagesize to the largest size available, and zero out
@@ -615,7 +615,7 @@ tioce_force_interrupt(struct sn_irq_info *sn_irq_info)
struct pcidev_info *pcidev_info;
struct tioce_common *ce_common;
struct tioce *ce_mmr;
- uint64_t force_int_val;
+ u64 force_int_val;
if (!sn_irq_info->irq_bridge)
return;
@@ -687,7 +687,7 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info)
struct tioce_common *ce_common;
struct tioce *ce_mmr;
int bit;
- uint64_t vector;
+ u64 vector;
pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
if (!pcidev_info)
@@ -699,7 +699,7 @@ tioce_target_interrupt(struct sn_irq_info *sn_irq_info)
bit = sn_irq_info->irq_int_bit;
__sn_setq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit));
- vector = (uint64_t)sn_irq_info->irq_irq << INTR_VECTOR_SHFT;
+ vector = (u64)sn_irq_info->irq_irq << INTR_VECTOR_SHFT;
vector |= sn_irq_info->irq_xtalkaddr;
writeq(vector, &ce_mmr->ce_adm_int_dest[bit]);
__sn_clrq_relaxed(&ce_mmr->ce_adm_int_mask, (1UL << bit));
diff --git a/arch/mips/kernel/reset.c b/arch/mips/kernel/reset.c
index ae2ba67b7ef6..5e37df3111ad 100644
--- a/arch/mips/kernel/reset.c
+++ b/arch/mips/kernel/reset.c
@@ -12,6 +12,9 @@
#include <linux/reboot.h>
#include <asm/reboot.h>
+void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
+
/*
* Urgs ... Too many MIPS machines to handle this in a generic way.
* So handle all using function pointers to machine specific
@@ -33,6 +36,9 @@ void machine_halt(void)
void machine_power_off(void)
{
+ if (pm_power_off)
+ pm_power_off();
+
_machine_power_off();
}
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 8cf6d437a630..01bc7d589afe 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -33,9 +33,11 @@ config GENERIC_CALIBRATE_DELAY
bool
default y
+config GENERIC_IOMAP
+ bool
+
config ARCH_MAY_HAVE_PC_FDC
bool
- default y
source "init/Kconfig"
@@ -53,24 +55,28 @@ config SH_SOLUTION_ENGINE
config SH_7751_SOLUTION_ENGINE
bool "SolutionEngine7751"
+ select CPU_SUBTYPE_SH7751
help
Select 7751 SolutionEngine if configuring for a Hitachi SH7751
evaluation board.
config SH_7300_SOLUTION_ENGINE
bool "SolutionEngine7300"
+ select CPU_SUBTYPE_SH7300
help
Select 7300 SolutionEngine if configuring for a Hitachi SH7300(SH-Mobile V)
evaluation board.
config SH_73180_SOLUTION_ENGINE
bool "SolutionEngine73180"
+ select CPU_SUBTYPE_SH73180
help
Select 73180 SolutionEngine if configuring for a Hitachi SH73180(SH-Mobile 3)
evaluation board.
config SH_7751_SYSTEMH
bool "SystemH7751R"
+ select CPU_SUBTYPE_SH7751R
help
Select SystemH if you are configuring for a Renesas SystemH
7751R evaluation board.
@@ -81,27 +87,13 @@ config SH_STB1_HARP
config SH_STB1_OVERDRIVE
bool "STB1_Overdrive"
-config SH_HP620
- bool "HP620"
+config SH_HP6XX
+ bool "HP6XX"
help
- Select HP620 if configuring for a HP jornada HP620.
+ Select HP6XX if configuring for a HP jornada HP6xx.
More information (hardware only) at
<http://www.hp.com/jornada/>.
-config SH_HP680
- bool "HP680"
- help
- Select HP680 if configuring for a HP Jornada HP680.
- More information (hardware only) at
- <http://www.hp.com/jornada/products/680/>.
-
-config SH_HP690
- bool "HP690"
- help
- Select HP690 if configuring for a HP Jornada HP690.
- More information (hardware only)
- at <http://www.hp.com/jornada/products/680/>.
-
config SH_CQREEK
bool "CqREEK"
help
@@ -123,11 +115,13 @@ config SH_EC3104
config SH_SATURN
bool "Saturn"
+ select CPU_SUBTYPE_SH7604
help
Select Saturn if configuring for a SEGA Saturn.
config SH_DREAMCAST
bool "Dreamcast"
+ select CPU_SUBTYPE_SH7091
help
Select Dreamcast if configuring for a SEGA Dreamcast.
More information at
@@ -142,6 +136,7 @@ config SH_BIGSUR
config SH_SH2000
bool "SH2000"
+ select CPU_SUBTYPE_SH7709
help
SH-2000 is a single-board computer based around SH7709A chip
intended for embedded applications.
@@ -153,20 +148,22 @@ config SH_ADX
bool "ADX"
config SH_MPC1211
- bool "MPC1211"
+ bool "Interface MPC1211"
+ help
+ CTP/PCI-SH02 is a CPU module computer that is produced
+ by Interface Corporation.
+ More information at <http://www.interface.co.jp>
config SH_SH03
- bool "SH03"
+ bool "Interface CTP/PCI-SH03"
help
- CTP/PCI-SH03 is a CPU module computer that produced
+ CTP/PCI-SH03 is a CPU module computer that is produced
by Interface Corporation.
- It is compact and excellent in durability.
- It will play an active part in your factory or laboratory
- as a FA computer.
More information at <http://www.interface.co.jp>
config SH_SECUREEDGE5410
bool "SecureEdge5410"
+ select CPU_SUBTYPE_SH7751R
help
Select SecureEdge5410 if configuring for a SnapGear SH board.
This includes both the OEM SecureEdge products as well as the
@@ -174,25 +171,49 @@ config SH_SECUREEDGE5410
config SH_HS7751RVOIP
bool "HS7751RVOIP"
+ select CPU_SUBTYPE_SH7751R
help
Select HS7751RVOIP if configuring for a Renesas Technology
Sales VoIP board.
config SH_RTS7751R2D
bool "RTS7751R2D"
+ select CPU_SUBTYPE_SH7751R
help
Select RTS7751R2D if configuring for a Renesas Technology
Sales SH-Graphics board.
+config SH_R7780RP
+ bool "R7780RP-1"
+ select CPU_SUBTYPE_SH7780
+ help
+ Select R7780RP-1 if configuring for a Renesas Solutions
+ HIGHLANDER board.
+
config SH_EDOSK7705
bool "EDOSK7705"
+ select CPU_SUBTYPE_SH7705
config SH_SH4202_MICRODEV
bool "SH4-202 MicroDev"
+ select CPU_SUBTYPE_SH4_202
help
Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
with an SH4-202 CPU.
+config SH_LANDISK
+ bool "LANDISK"
+ select CPU_SUBTYPE_SH7751R
+ help
+ I-O DATA DEVICE, INC. "LANDISK Series" support.
+
+config SH_TITAN
+ bool "TITAN"
+ select CPU_SUBTYPE_SH7751R
+ help
+ Select Titan if you are configuring for a Nimble Microsystems
+ NetEngine NP51R.
+
config SH_UNKNOWN
bool "BareCPU"
help
@@ -207,168 +228,27 @@ config SH_UNKNOWN
endchoice
-choice
- prompt "Processor family"
- default CPU_SH4
- help
- This option determines the CPU family to compile for. Supported
- targets are SH-2, SH-3, and SH-4. These options are independent of
- CPU functionality. As such, SH-DSP users will still want to select
- their respective processor family in addition to the DSP support
- option.
-
-config CPU_SH2
- bool "SH-2"
- select SH_WRITETHROUGH
-
-config CPU_SH3
- bool "SH-3"
-
-config CPU_SH4
- bool "SH-4"
-
-endchoice
-
-choice
- prompt "Processor subtype"
-
-config CPU_SUBTYPE_SH7604
- bool "SH7604"
- depends on CPU_SH2
- help
- Select SH7604 if you have SH7604
-
-config CPU_SUBTYPE_SH7300
- bool "SH7300"
- depends on CPU_SH3
-
-config CPU_SUBTYPE_SH7705
- bool "SH7705"
- depends on CPU_SH3
-
-config CPU_SUBTYPE_SH7707
- bool "SH7707"
- depends on CPU_SH3
- help
- Select SH7707 if you have a 60 Mhz SH-3 HD6417707 CPU.
-
-config CPU_SUBTYPE_SH7708
- bool "SH7708"
- depends on CPU_SH3
- help
- Select SH7708 if you have a 60 Mhz SH-3 HD6417708S or
- if you have a 100 Mhz SH-3 HD6417708R CPU.
-
-config CPU_SUBTYPE_SH7709
- bool "SH7709"
- depends on CPU_SH3
- help
- Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU.
-
-config CPU_SUBTYPE_SH7750
- bool "SH7750"
- depends on CPU_SH4
- help
- Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU.
-
-config CPU_SUBTYPE_SH7751
- bool "SH7751/SH7751R"
- depends on CPU_SH4
- help
- Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU,
- or if you have a HD6417751R CPU.
-
-config CPU_SUBTYPE_SH7760
- bool "SH7760"
- depends on CPU_SH4
-
-config CPU_SUBTYPE_SH73180
- bool "SH73180"
- depends on CPU_SH4
-
-config CPU_SUBTYPE_ST40STB1
- bool "ST40STB1 / ST40RA"
- depends on CPU_SH4
- help
- Select ST40STB1 if you have a ST40RA CPU.
- This was previously called the ST40STB1, hence the option name.
-
-config CPU_SUBTYPE_ST40GX1
- bool "ST40GX1"
- depends on CPU_SH4
- help
- Select ST40GX1 if you have a ST40GX1 CPU.
-
-config CPU_SUBTYPE_SH4_202
- bool "SH4-202"
- depends on CPU_SH4
-
-endchoice
-
-config SH7705_CACHE_32KB
- bool "Enable 32KB cache size for SH7705"
- depends on CPU_SUBTYPE_SH7705
- default y
-
-config MMU
- bool "Support for memory management hardware"
- depends on !CPU_SH2
- default y
- help
- Early SH processors (such as the SH7604) lack an MMU. In order to
- boot on these systems, this option must not be set.
-
- On other systems (such as the SH-3 and 4) where an MMU exists,
- turning this off will boot the kernel on these machines with the
- MMU implicitly switched off.
-
-choice
- prompt "HugeTLB page size"
- depends on HUGETLB_PAGE && CPU_SH4 && MMU
- default HUGETLB_PAGE_SIZE_64K
-
-config HUGETLB_PAGE_SIZE_64K
- bool "64K"
-
-config HUGETLB_PAGE_SIZE_1MB
- bool "1MB"
-
-endchoice
-
-config CMDLINE_BOOL
- bool "Default bootloader kernel arguments"
-
-config CMDLINE
- string "Initial kernel command string"
- depends on CMDLINE_BOOL
- default "console=ttySC1,115200"
+source "arch/sh/mm/Kconfig"
-# Platform-specific memory start and size definitions
config MEMORY_START
- hex "Physical memory start address" if !MEMORY_SET || MEMORY_OVERRIDE
- default "0x08000000" if !MEMORY_SET || MEMORY_OVERRIDE || !MEMORY_OVERRIDE && SH_ADX || SH_MPC1211 || SH_SH03 || SH_SECUREEDGE5410 || SH_SH4202_MICRODEV
- default "0x0c000000" if !MEMORY_OVERRIDE && (SH_DREAMCAST || SH_HP600 || SH_BIGSUR || SH_SH2000 || SH_73180_SOLUTION_ENGINE || SH_7300_SOLUTION_ENGINE || SH_7751_SOLUTION_ENGINE || SH_SOLUTION_ENGINE || SH_HS7751RVOIP || SH_RTS7751R2D || SH_EDOSK7705)
+ hex "Physical memory start address"
+ default "0x08000000"
---help---
Computers built with Hitachi SuperH processors always
map the ROM starting at address zero. But the processor
does not specify the range that RAM takes.
The physical memory (RAM) start address will be automatically
- set to 08000000, unless you selected one of the following
- processor types: SolutionEngine, Overdrive, HP620, HP680, HP690,
- in which case the start address will be set to 0c000000.
+ set to 08000000. Other platforms, such as the Solution Engine
+ boards typically map RAM at 0C000000.
- Tweak this only when porting to a new machine which is not already
- known by the config system. Changing it from the known correct
+ Tweak this only when porting to a new machine which does not
+ already have a defconfig. Changing it from the known correct
value on any of the known systems will only lead to disaster.
config MEMORY_SIZE
- hex "Physical memory size" if !MEMORY_SET || MEMORY_OVERRIDE
- default "0x00400000" if !MEMORY_SET || MEMORY_OVERRIDE || !MEMORY_OVERRIDE && SH_ADX || !MEMORY_OVERRIDE && (SH_HP600 || SH_BIGSUR || SH_SH2000)
- default "0x01000000" if !MEMORY_OVERRIDE && SH_DREAMCAST || SH_SECUREEDGE5410 || SH_EDOSK7705
- default "0x02000000" if !MEMORY_OVERRIDE && (SH_73180_SOLUTION_ENGINE || SH_SOLUTION_ENGINE)
- default "0x04000000" if !MEMORY_OVERRIDE && (SH_7300_SOLUTION_ENGINE || SH_7751_SOLUTION_ENGINE || SH_HS7751RVOIP || SH_RTS7751R2D || SH_SH4202_MICRODEV)
- default "0x08000000" if SH_MPC1211 || SH_SH03
+ hex "Physical memory size"
+ default "0x00400000"
help
This sets the default memory size assumed by your SH kernel. It can
be overridden as normal by the 'mem=' argument on the kernel command
@@ -376,21 +256,6 @@ config MEMORY_SIZE
as 0x00400000 which was the default value before this became
configurable.
-config MEMORY_SET
- bool
- depends on !MEMORY_OVERRIDE && (SH_MPC1211 || SH_SH03 || SH_ADX || SH_DREAMCAST || SH_HP600 || SH_BIGSUR || SH_SH2000 || SH_7751_SOLUTION_ENGINE || SH_SOLUTION_ENGINE || SH_SECUREEDGE5410 || SH_HS7751RVOIP || SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_EDOSK7705)
- default y
- help
- This is an option about which you will never be asked a question.
- Therefore, I conclude that you do not exist - go away.
-
- There is a grue here.
-
-# If none of the above have set memory start/size, ask the user.
-config MEMORY_OVERRIDE
- bool "Override default load address and memory size"
-
-# XXX: break these out into the board-specific configs below
config CF_ENABLER
bool "Compact Flash Enabler support"
depends on SH_ADX || SH_SOLUTION_ENGINE || SH_UNKNOWN || SH_CAT68701 || SH_SH03
@@ -434,10 +299,21 @@ config CF_BASE_ADDR
default "0xb8000000" if CF_AREA6
default "0xb4000000" if CF_AREA5
+menu "Processor features"
+
+config CPU_LITTLE_ENDIAN
+ bool "Little Endian"
+ help
+ Some SuperH machines can be configured for either little or big
+ endian byte order. These modes require different kernels. Say Y if
+ your machine is little endian, N if it's a big endian machine.
+
# The SH7750 RTC module is disabled in the Dreamcast
config SH_RTC
bool
- depends on !SH_DREAMCAST && !SH_SATURN && !SH_7300_SOLUTION_ENGINE && !SH_73180_SOLUTION_ENGINE
+ depends on !SH_DREAMCAST && !SH_SATURN && !SH_7300_SOLUTION_ENGINE && \
+ !SH_73180_SOLUTION_ENGINE && !SH_LANDISK && \
+ !SH_R7780RP
default y
help
Selecting this option will allow the Linux kernel to emulate
@@ -476,104 +352,131 @@ config SH_ADC
If unsure, say N.
-config SH_HP600
+config SH_STORE_QUEUES
+ bool "Support for Store Queues"
+ depends on CPU_SH4
+ help
+ Selecting this option will enable an in-kernel API for manipulating
+ the store queues integrated in the SH-4 processors.
+
+config CPU_HAS_INTEVT
bool
- depends on SH_HP620 || SH_HP680 || SH_HP690
- default y
-config CPU_SUBTYPE_ST40
- bool
- depends on CPU_SUBTYPE_ST40STB1 || CPU_SUBTYPE_ST40GX1
- default y
+config CPU_HAS_PINT_IRQ
+ bool
-source "mm/Kconfig"
+config CPU_HAS_INTC2_IRQ
+ bool
-config ZERO_PAGE_OFFSET
- hex "Zero page offset"
- default "0x00001000" if !(SH_MPC1211 || SH_SH03)
- default "0x00004000" if SH_MPC1211 || SH_SH03
+config CPU_HAS_SR_RB
+ bool "CPU has SR.RB"
+ depends on CPU_SH3 || CPU_SH4
+ default y
help
- This sets the default offset of zero page.
+ This will enable the use of SR.RB register bank usage. Processors
+ that are lacking this bit must have another method in place for
+ accomplishing what is taken care of by the banked registers.
-# XXX: needs to lose subtype for system type
-config ST40_LMI_MEMORY
- bool "Memory on LMI"
- depends on CPU_SUBTYPE_ST40STB1
+ See <file:Documentation/sh/register-banks.txt> for further
+ information on SR.RB and register banking in the kernel in general.
-config MEMORY_START
- hex
- depends on CPU_SUBTYPE_ST40STB1 && ST40_LMI_MEMORY
- default "0x08000000"
+endmenu
-config MEMORY_SIZE
- hex
- depends on CPU_SUBTYPE_ST40STB1 && ST40_LMI_MEMORY
- default "0x00400000"
+menu "Timer support"
-config MEMORY_SET
- bool
- depends on CPU_SUBTYPE_ST40STB1 && ST40_LMI_MEMORY
+config SH_TMU
+ bool "TMU timer support"
default y
-
-config BOOT_LINK_OFFSET
- hex "Link address offset for booting"
- default "0x00800000"
help
- This option allows you to set the link address offset of the zImage.
- This can be useful if you are on a board which has a small amount of
- memory.
+ This enables the use of the TMU as the system timer.
-config CPU_LITTLE_ENDIAN
- bool "Little Endian"
- help
- Some SuperH machines can be configured for either little or big
- endian byte order. These modes require different kernels. Say Y if
- your machine is little endian, N if it's a big endian machine.
+endmenu
-config PREEMPT
- bool "Preemptible Kernel (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
-config UBC_WAKEUP
- bool "Wakeup UBC on startup"
+source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
+
+config SH_PCLK_FREQ_BOOL
+ bool "Set default pclk frequency"
+ default y if !SH_RTC
+ default n
+
+config SH_PCLK_FREQ
+ int "Peripheral clock frequency (in Hz)"
+ depends on SH_PCLK_FREQ_BOOL
+ default "50000000" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7780
+ default "60000000" if CPU_SUBTYPE_SH7751
+ default "33333333" if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH7770 || CPU_SUBTYPE_SH7760
+ default "27000000" if CPU_SUBTYPE_SH73180
+ default "66000000" if CPU_SUBTYPE_SH4_202
help
- Selecting this option will wakeup the User Break Controller (UBC) on
- startup. Although the UBC is left in an awake state when the processor
- comes up, some boot loaders misbehave by putting the UBC to sleep in a
- power saving state, which causes issues with things like ptrace().
+ This option is used to specify the peripheral clock frequency.
+ This is necessary for determining the reference clock value on
+ platforms lacking an RTC.
- If unsure, say N.
+menu "CPU Frequency scaling"
+
+source "drivers/cpufreq/Kconfig"
-config SH_WRITETHROUGH
- bool "Use write-through caching"
- default y if CPU_SH2
+config SH_CPU_FREQ
+ tristate "SuperH CPU Frequency driver"
+ depends on CPU_FREQ
+ select CPU_FREQ_TABLE
help
- Selecting this option will configure the caches in write-through
- mode, as opposed to the default write-back configuration.
+ This adds the cpufreq driver for SuperH. At present, only
+ the SH-4 is supported.
- Since there's sill some aliasing issues on SH-4, this option will
- unfortunately still require the majority of flushing functions to
- be implemented to deal with aliasing.
+ For details, take a look at <file:Documentation/cpu-freq>.
If unsure, say N.
-config SH_OCRAM
- bool "Operand Cache RAM (OCRAM) support"
+endmenu
+
+source "arch/sh/drivers/dma/Kconfig"
+
+source "arch/sh/cchips/Kconfig"
+
+config HEARTBEAT
+ bool "Heartbeat LED"
+ depends on SH_MPC1211 || SH_SH03 || SH_CAT68701 || \
+ SH_STB1_HARP || SH_STB1_OVERDRIVE || SH_BIGSUR || \
+ SH_7751_SOLUTION_ENGINE || SH_7300_SOLUTION_ENGINE || \
+ SH_73180_SOLUTION_ENGINE || SH_SOLUTION_ENGINE || \
+ SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK
help
- Selecting this option will automatically tear down the number of
- sets in the dcache by half, which in turn exposes a memory range.
+ Use the power-on LED on your machine as a load meter. The exact
+ behavior is platform-dependent, but normally the flash frequency is
+ a hyperbolic function of the 5-minute load average.
- The addresses for the OC RAM base will vary according to the
- processor version. Consult vendor documentation for specifics.
+endmenu
- If unsure, say N.
+config ISA_DMA_API
+ bool
+ depends on MPC1211
+ default y
-config SH_STORE_QUEUES
- bool "Support for Store Queues"
- depends on CPU_SH4
+menu "Kernel features"
+
+config KEXEC
+ bool "kexec system call (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
help
- Selecting this option will enable an in-kernel API for manipulating
- the store queues integrated in the SH-4 processors.
+ kexec is a system call that implements the ability to shutdown your
+ current kernel, and to start another kernel. It is like a reboot
+ but it is indepedent of the system firmware. And like a reboot
+ you can start any kernel with it, not just Linux.
+
+ The name comes from the similiarity to the exec system call.
+
+ It is an ongoing process to be certain the hardware in a machine
+ is properly shutdown, so do not be surprised if this code does not
+ initially work for you. It may help to enable device hotplugging
+ support. As of this writing the exact hardware interface is
+ strongly in flux, so no good recommendation can be made.
+
+config PREEMPT
+ bool "Preemptible Kernel (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
config SMP
bool "Symmetric multi-processing support"
@@ -610,87 +513,58 @@ config NR_CPUS
This is purely to save memory - each supported CPU adds
approximately eight kilobytes to the kernel image.
-config HS7751RVOIP_CODEC
- bool "Support VoIP Codec section"
- depends on SH_HS7751RVOIP
- help
- Selecting this option will support CODEC section.
-
-config RTS7751R2D_REV11
- bool "RTS7751R2D Rev. 1.1 board support"
- depends on SH_RTS7751R2D
- help
- Selecting this option will support version rev. 1.1.
-
-config SH_PCLK_CALC
- bool
- default n if CPU_SUBTYPE_SH7300 || CPU_SUBTYPE_SH73180
+config CPU_HAS_SR_RB
+ bool "CPU has SR.RB"
+ depends on CPU_SH3 || CPU_SH4
default y
help
- This option will cause the PCLK value to be probed at run-time. It
- will display a notification if the probed value has greater than a
- 1% variance of the hardcoded CONFIG_SH_PCLK_FREQ.
+ This will enable the use of SR.RB register bank usage. Processors
+ that are lacking this bit must have another method in place for
+ accomplishing what is taken care of by the banked registers.
-config SH_PCLK_FREQ
- int "Peripheral clock frequency (in Hz)"
- default "50000000" if CPU_SUBTYPE_SH7750
- default "60000000" if CPU_SUBTYPE_SH7751
- default "33333333" if CPU_SUBTYPE_SH7300
- default "27000000" if CPU_SUBTYPE_SH73180
- default "66000000" if CPU_SUBTYPE_SH4_202
- default "1193182"
- help
- This option is used to specify the peripheral clock frequency. This
- option must be set for each processor in order for the kernel to
- function reliably. If no sane default exists, we use a default from
- the legacy i8254. Any discrepancies will be reported on boot time
- with an auto-probed frequency which should be considered the proper
- value for your hardware.
+ See <file:Documentation/sh/register-banks.txt> for further
+ information on SR.RB and register banking in the kernel in general.
-menu "CPU Frequency scaling"
+endmenu
-source "drivers/cpufreq/Kconfig"
+menu "Boot options"
-config SH_CPU_FREQ
- tristate "SuperH CPU Frequency driver"
- depends on CPU_FREQ
- select CPU_FREQ_TABLE
+config ZERO_PAGE_OFFSET
+ hex "Zero page offset"
+ default "0x00004000" if SH_MPC1211 || SH_SH03
+ default "0x00001000"
help
- This adds the cpufreq driver for SuperH. At present, only
- the SH-4 is supported.
-
- For details, take a look at <file:Documentation/cpu-freq>.
-
- If unsure, say N.
+ This sets the default offset of zero page.
-endmenu
+config BOOT_LINK_OFFSET
+ hex "Link address offset for booting"
+ default "0x00800000"
+ help
+ This option allows you to set the link address offset of the zImage.
+ This can be useful if you are on a board which has a small amount of
+ memory.
-source "arch/sh/drivers/dma/Kconfig"
+config UBC_WAKEUP
+ bool "Wakeup UBC on startup"
+ help
+ Selecting this option will wakeup the User Break Controller (UBC) on
+ startup. Although the UBC is left in an awake state when the processor
+ comes up, some boot loaders misbehave by putting the UBC to sleep in a
+ power saving state, which causes issues with things like ptrace().
-source "arch/sh/cchips/Kconfig"
+ If unsure, say N.
-config HEARTBEAT
- bool "Heartbeat LED"
- depends on SH_MPC1211 || SH_SH03 || SH_CAT68701 || SH_STB1_HARP || SH_STB1_OVERDRIVE || SH_BIGSUR || SH_7751_SOLUTION_ENGINE || SH_7300_SOLUTION_ENGINE || SH_73180_SOLUTION_ENGINE || SH_SOLUTION_ENGINE || SH_RTS7751R2D || SH_SH4202_MICRODEV
- help
- Use the power-on LED on your machine as a load meter. The exact
- behavior is platform-dependent, but normally the flash frequency is
- a hyperbolic function of the 5-minute load average.
+config CMDLINE_BOOL
+ bool "Default bootloader kernel arguments"
-config RTC_9701JE
- tristate "EPSON RTC-9701JE support"
- depends on SH_RTS7751R2D
- help
- Selecting this option will support EPSON RTC-9701JE.
+config CMDLINE
+ string "Initial kernel command string"
+ depends on CMDLINE_BOOL
+ default "console=ttySC1,115200"
endmenu
-config ISA_DMA_API
- bool
- depends on MPC1211
- default y
-
-menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
+menu "Bus options"
# Even on SuperH devices which don't have an ISA bus,
# this variable helps the PCMCIA modules handle
@@ -701,7 +575,7 @@ menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
# PCMCIA outright. -- PFM.
config ISA
bool
- default y if PCMCIA || SMC91X
+ default y if PCMCIA
help
Find out whether you have ISA slots on your motherboard. ISA is the
name of a bus system, i.e. the way the CPU talks to the other stuff
@@ -735,10 +609,9 @@ config MCA
config SBUS
bool
-config MAPLE
- tristate "Maple Bus support"
- depends on SH_DREAMCAST
- default y
+config SUPERHYWAY
+ tristate "SuperHyway Bus support"
+ depends on CPU_SUBTYPE_SH4_202
source "arch/sh/drivers/pci/Kconfig"
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 3fab181da364..8fb31ab2c02c 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -17,7 +17,7 @@ config SH_STANDARD_BIOS
config EARLY_SCIF_CONSOLE
bool "Use early SCIF console"
- depends on CPU_SH4
+ depends on CPU_SH4 || CPU_SH2A && !SH_STANDARD_BIOS
config EARLY_PRINTK
bool "Early printk support"
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 67192d6b00d8..08c9515c4806 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -17,10 +17,30 @@
cflags-y := -mb
cflags-$(CONFIG_CPU_LITTLE_ENDIAN) := -ml
+isa-y := any
+isa-$(CONFIG_CPU_SH2) := sh2
+isa-$(CONFIG_CPU_SH3) := sh3
+isa-$(CONFIG_CPU_SH4) := sh4
+isa-$(CONFIG_CPU_SH4A) := sh4a
+isa-$(CONFIG_CPU_SH2A) := sh2a
+
+isa-$(CONFIG_SH_DSP) := $(isa-y)-dsp
+
+ifndef CONFIG_MMU
+isa-y := $(isa-y)-nommu
+endif
+
+ifndef CONFIG_SH_FPU
+isa-y := $(isa-y)-nofpu
+endif
+
+cflags-y += $(call as-option,-Wa$(comma)-isa=$(isa-y),)
+
cflags-$(CONFIG_CPU_SH2) += -m2
cflags-$(CONFIG_CPU_SH3) += -m3
cflags-$(CONFIG_CPU_SH4) += -m4 \
$(call cc-option,-mno-implicit-fp,-m4-nofpu)
+cflags-$(CONFIG_CPU_SH4A) += $(call cc-option,-m4a-nofpu,)
cflags-$(CONFIG_SH_DSP) += -Wa,-dsp
cflags-$(CONFIG_SH_KGDB) += -g
@@ -67,9 +87,7 @@ machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE) := se/7300
machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE) := se/73180
machdir-$(CONFIG_SH_STB1_HARP) := harp
machdir-$(CONFIG_SH_STB1_OVERDRIVE) := overdrive
-machdir-$(CONFIG_SH_HP620) := hp6xx/hp620
-machdir-$(CONFIG_SH_HP680) := hp6xx/hp680
-machdir-$(CONFIG_SH_HP690) := hp6xx/hp690
+machdir-$(CONFIG_SH_HP6XX) := hp6xx
machdir-$(CONFIG_SH_CQREEK) := cqreek
machdir-$(CONFIG_SH_DMIDA) := dmida
machdir-$(CONFIG_SH_EC3104) := ec3104
@@ -119,31 +137,39 @@ boot := arch/sh/boot
CPPFLAGS_vmlinux.lds := -traditional
+ifneq ($(KBUILD_SRC),)
+incdir-prefix := $(srctree)/include/asm-sh/
+else
+incdir-prefix :=
+endif
+
# Update machine arch and proc symlinks if something which affects
# them changed. We use .arch and .mach to indicate when they were
# updated last, otherwise make uses the target directory mtime.
include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) include/config/MARKER
@echo ' SYMLINK include/asm-sh/cpu -> include/asm-sh/$(cpuincdir-y)'
-ifneq ($(KBUILD_SRC),)
- $(Q)mkdir -p include/asm-sh
- $(Q)ln -fsn $(srctree)/include/asm-sh/$(cpuincdir-y) include/asm-sh/cpu
-else
- $(Q)ln -fsn $(cpuincdir-y) include/asm-sh/cpu
-endif
+ $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
+ $(Q)ln -fsn $(incdir-prefix)$(cpuincdir-y) include/asm-sh/cpu
@touch $@
+# Most boards have their own mach directories. For the ones that
+# don't, just reference the parent directory so the semantics are
+# kept roughly the same.
+
include/asm-sh/.mach: $(wildcard include/config/sh/*.h) include/config/MARKER
- @echo ' SYMLINK include/asm-sh/mach -> include/asm-sh/$(incdir-y)'
-ifneq ($(KBUILD_SRC),)
- $(Q)mkdir -p include/asm-sh
- $(Q)ln -fsn $(srctree)/include/asm-sh/$(incdir-y) include/asm-sh/mach
-else
- $(Q)ln -fsn $(incdir-y) include/asm-sh/mach
-endif
+ @echo -n ' SYMLINK include/asm-sh/mach -> '
+ $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
+ $(Q)if [ -d $(incdir-prefix)$(incdir-y) ]; then \
+ echo -e 'include/asm-sh/$(incdir-y)'; \
+ ln -fsn $(incdir-prefix)$(incdir-y) \
+ include/asm-sh/mach; \
+ else \
+ echo -e 'include/asm-sh'; \
+ ln -fsn $(incdir-prefix) include/asm-sh/mach; \
+ fi
@touch $@
-
archprepare: maketools include/asm-sh/.cpu include/asm-sh/.mach
.PHONY: maketools FORCE
diff --git a/arch/sh/boards/hp6xx/Makefile b/arch/sh/boards/hp6xx/Makefile
new file mode 100644
index 000000000000..927fe0aa5dfa
--- /dev/null
+++ b/arch/sh/boards/hp6xx/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the HP6xx specific parts of the kernel
+#
+
+obj-y := mach.o setup.o
+
diff --git a/arch/sh/boards/hp6xx/hp620/Makefile b/arch/sh/boards/hp6xx/hp620/Makefile
deleted file mode 100644
index 20691dbce347..000000000000
--- a/arch/sh/boards/hp6xx/hp620/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for the HP620 specific parts of the kernel
-#
-
-obj-y := mach.o setup.o
-
diff --git a/arch/sh/boards/hp6xx/hp620/mach.c b/arch/sh/boards/hp6xx/hp620/mach.c
deleted file mode 100644
index 0392d82b4a7b..000000000000
--- a/arch/sh/boards/hp6xx/hp620/mach.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * linux/arch/sh/boards/hp6xx/hp620/mach.c
- *
- * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Machine vector for the HP620
- */
-
-#include <linux/init.h>
-
-#include <asm/machvec.h>
-#include <asm/rtc.h>
-#include <asm/machvec_init.h>
-
-#include <asm/io.h>
-#include <asm/hd64461/hd64461.h>
-#include <asm/irq.h>
-
-/*
- * The Machine Vector
- */
-
-struct sh_machine_vector mv_hp620 __initmv = {
- .mv_nr_irqs = HD64461_IRQBASE+HD64461_IRQ_NUM,
-
- .mv_inb = hd64461_inb,
- .mv_inw = hd64461_inw,
- .mv_inl = hd64461_inl,
- .mv_outb = hd64461_outb,
- .mv_outw = hd64461_outw,
- .mv_outl = hd64461_outl,
-
- .mv_inb_p = hd64461_inb_p,
- .mv_inw_p = hd64461_inw,
- .mv_inl_p = hd64461_inl,
- .mv_outb_p = hd64461_outb_p,
- .mv_outw_p = hd64461_outw,
- .mv_outl_p = hd64461_outl,
-
- .mv_insb = hd64461_insb,
- .mv_insw = hd64461_insw,
- .mv_insl = hd64461_insl,
- .mv_outsb = hd64461_outsb,
- .mv_outsw = hd64461_outsw,
- .mv_outsl = hd64461_outsl,
-
- .mv_irq_demux = hd64461_irq_demux,
-};
-ALIAS_MV(hp620)
diff --git a/arch/sh/boards/hp6xx/hp620/setup.c b/arch/sh/boards/hp6xx/hp620/setup.c
deleted file mode 100644
index 045fc5da7274..000000000000
--- a/arch/sh/boards/hp6xx/hp620/setup.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * linux/arch/sh/boards/hp6xx/hp620/setup.c
- *
- * Copyright (C) 2002 Andriy Skulysh, 2005 Kristoffer Ericson
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See Linux/COPYING for more information.
- *
- * Setup code for an HP620.
- * Due to similiarity with hp680/hp690 same inits are done (for now)
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <asm/hd64461/hd64461.h>
-#include <asm/io.h>
-#include <asm/hp6xx/hp6xx.h>
-#include <asm/cpu/dac.h>
-
-const char *get_system_type(void)
-{
- return "HP620";
-}
-
-int __init platform_setup(void)
-{
- u16 v;
-
- v = inw(HD64461_STBCR);
- v |= HD64461_STBCR_SURTST | HD64461_STBCR_SIRST |
- HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST |
- HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST |
- HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST |
- HD64461_STBCR_SAFECKE_IST;
- outw(v, HD64461_STBCR);
-
- v = inw(HD64461_GPADR);
- v |= HD64461_GPADR_SPEAKER | HD64461_GPADR_PCMCIA0;
- outw(v, HD64461_GPADR);
-
- sh_dac_disable(DAC_SPEAKER_VOLUME);
-
- return 0;
-}
-
diff --git a/arch/sh/boards/hp6xx/hp680/Makefile b/arch/sh/boards/hp6xx/hp680/Makefile
deleted file mode 100644
index 0beef11d9b11..000000000000
--- a/arch/sh/boards/hp6xx/hp680/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for the HP680 specific parts of the kernel
-#
-
-obj-y := mach.o setup.o
-
diff --git a/arch/sh/boards/hp6xx/hp690/Makefile b/arch/sh/boards/hp6xx/hp690/Makefile
deleted file mode 100644
index fbbe95e75f83..000000000000
--- a/arch/sh/boards/hp6xx/hp690/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for the HP690 specific parts of the kernel
-#
-
-obj-y := mach.o
-
diff --git a/arch/sh/boards/hp6xx/hp690/mach.c b/arch/sh/boards/hp6xx/hp690/mach.c
deleted file mode 100644
index 2a4c68783cd6..000000000000
--- a/arch/sh/boards/hp6xx/hp690/mach.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * linux/arch/sh/boards/hp6xx/hp690/mach.c
- *
- * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Machine vector for the HP690
- */
-
-#include <linux/init.h>
-
-#include <asm/machvec.h>
-#include <asm/rtc.h>
-#include <asm/machvec_init.h>
-
-#include <asm/io.h>
-#include <asm/hd64461/hd64461.h>
-#include <asm/irq.h>
-
-struct sh_machine_vector mv_hp690 __initmv = {
- .mv_nr_irqs = HD64461_IRQBASE+HD64461_IRQ_NUM,
-
- .mv_inb = hd64461_inb,
- .mv_inw = hd64461_inw,
- .mv_inl = hd64461_inl,
- .mv_outb = hd64461_outb,
- .mv_outw = hd64461_outw,
- .mv_outl = hd64461_outl,
-
- .mv_inb_p = hd64461_inb_p,
- .mv_inw_p = hd64461_inw,
- .mv_inl_p = hd64461_inl,
- .mv_outb_p = hd64461_outb_p,
- .mv_outw_p = hd64461_outw,
- .mv_outl_p = hd64461_outl,
-
- .mv_insb = hd64461_insb,
- .mv_insw = hd64461_insw,
- .mv_insl = hd64461_insl,
- .mv_outsb = hd64461_outsb,
- .mv_outsw = hd64461_outsw,
- .mv_outsl = hd64461_outsl,
-
- .mv_irq_demux = hd64461_irq_demux,
-};
-ALIAS_MV(hp690)
diff --git a/arch/sh/boards/hp6xx/hp680/mach.c b/arch/sh/boards/hp6xx/mach.c
index d73486136045..08dbba910f74 100644
--- a/arch/sh/boards/hp6xx/hp680/mach.c
+++ b/arch/sh/boards/hp6xx/mach.c
@@ -1,5 +1,5 @@
/*
- * linux/arch/sh/boards/hp6xx/hp680/mach.c
+ * linux/arch/sh/boards/hp6xx/mach.c
*
* Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com)
*
@@ -8,19 +8,12 @@
*
* Machine vector for the HP680
*/
-
-#include <linux/init.h>
-
#include <asm/machvec.h>
-#include <asm/rtc.h>
-#include <asm/machvec_init.h>
-
+#include <asm/hd64461.h>
#include <asm/io.h>
-#include <asm/hd64461/hd64461.h>
-#include <asm/hp6xx/io.h>
#include <asm/irq.h>
-struct sh_machine_vector mv_hp680 __initmv = {
+struct sh_machine_vector mv_hp6xx __initmv = {
.mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM,
.mv_inb = hd64461_inb,
@@ -50,4 +43,4 @@ struct sh_machine_vector mv_hp680 __initmv = {
.mv_irq_demux = hd64461_irq_demux,
};
-ALIAS_MV(hp680)
+ALIAS_MV(hp6xx)
diff --git a/arch/sh/boards/hp6xx/hp680/setup.c b/arch/sh/boards/hp6xx/setup.c
index 4170190f2644..6d94a8e2e67a 100644
--- a/arch/sh/boards/hp6xx/hp680/setup.c
+++ b/arch/sh/boards/hp6xx/setup.c
@@ -11,18 +11,19 @@
#include <linux/config.h>
#include <linux/init.h>
-#include <asm/hd64461/hd64461.h>
#include <asm/io.h>
+#include <asm/hd64461.h>
#include <asm/hp6xx/hp6xx.h>
#include <asm/cpu/dac.h>
const char *get_system_type(void)
{
- return "HP680";
+ return "HP6xx";
}
int __init platform_setup(void)
{
+ u8 v8;
u16 v;
v = inw(HD64461_STBCR);
v |= HD64461_STBCR_SURTST | HD64461_STBCR_SIRST |
@@ -30,12 +31,25 @@ int __init platform_setup(void)
HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST |
HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST |
HD64461_STBCR_SAFECKE_IST;
+#ifndef CONFIG_HD64461_ENABLER
+ v |= HD64461_STBCR_SPC1ST;
+#endif
outw(v, HD64461_STBCR);
v = inw(HD64461_GPADR);
v |= HD64461_GPADR_SPEAKER | HD64461_GPADR_PCMCIA0;
outw(v, HD64461_GPADR);
+ outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC0GCR);
+
+#ifndef CONFIG_HD64461_ENABLER
+ outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC1GCR);
+#endif
+
+ sh_dac_output(0, DAC_SPEAKER_VOLUME);
sh_dac_disable(DAC_SPEAKER_VOLUME);
+ v8 = ctrl_inb(DACR);
+ v8 &= ~DACR_DAE;
+ ctrl_outb(v8,DACR);
return 0;
}
diff --git a/arch/sh/boards/overdrive/Makefile b/arch/sh/boards/overdrive/Makefile
index 1762b59e9279..245f03baf762 100644
--- a/arch/sh/boards/overdrive/Makefile
+++ b/arch/sh/boards/overdrive/Makefile
@@ -2,7 +2,7 @@
# Makefile for the STMicroelectronics Overdrive specific parts of the kernel
#
-obj-y := mach.o setup.o io.o irq.o led.o time.o
+obj-y := mach.o setup.o io.o irq.o led.o
obj-$(CONFIG_PCI) += fpga.o galileo.o pcidma.o
diff --git a/arch/sh/boards/overdrive/setup.c b/arch/sh/boards/overdrive/setup.c
index a36ce0284ed3..94f6165d33b8 100644
--- a/arch/sh/boards/overdrive/setup.c
+++ b/arch/sh/boards/overdrive/setup.c
@@ -17,8 +17,6 @@
#include <asm/overdrive/overdrive.h>
#include <asm/overdrive/fpga.h>
-extern void od_time_init(void);
-
const char *get_system_type(void)
{
return "SH7750 Overdrive";
@@ -31,11 +29,9 @@ int __init platform_setup(void)
{
#ifdef CONFIG_PCI
init_overdrive_fpga();
- galileo_init();
+ galileo_init();
#endif
- board_time_init = od_time_init;
-
/* Enable RS232 receive buffers */
writel(0x1e, OVERDRIVE_CTRL);
}
diff --git a/arch/sh/boards/overdrive/time.c b/arch/sh/boards/overdrive/time.c
deleted file mode 100644
index 68533690e097..000000000000
--- a/arch/sh/boards/overdrive/time.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * arch/sh/boards/overdrive/time.c
- *
- * Copyright (C) 2000 Stuart Menefy (stuart.menefy@st.com)
- * Copyright (C) 2002 Paul Mundt (lethal@chaoticdreams.org)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * STMicroelectronics Overdrive Support.
- */
-
-void od_time_init(void)
-{
- struct frqcr_data {
- unsigned short frqcr;
- struct {
- unsigned char multiplier;
- unsigned char divisor;
- } factor[3];
- };
-
- static struct frqcr_data st40_frqcr_table[] = {
- { 0x000, {{1,1}, {1,1}, {1,2}}},
- { 0x002, {{1,1}, {1,1}, {1,4}}},
- { 0x004, {{1,1}, {1,1}, {1,8}}},
- { 0x008, {{1,1}, {1,2}, {1,2}}},
- { 0x00A, {{1,1}, {1,2}, {1,4}}},
- { 0x00C, {{1,1}, {1,2}, {1,8}}},
- { 0x011, {{1,1}, {2,3}, {1,6}}},
- { 0x013, {{1,1}, {2,3}, {1,3}}},
- { 0x01A, {{1,1}, {1,2}, {1,4}}},
- { 0x01C, {{1,1}, {1,2}, {1,8}}},
- { 0x023, {{1,1}, {2,3}, {1,3}}},
- { 0x02C, {{1,1}, {1,2}, {1,8}}},
- { 0x048, {{1,2}, {1,2}, {1,4}}},
- { 0x04A, {{1,2}, {1,2}, {1,6}}},
- { 0x04C, {{1,2}, {1,2}, {1,8}}},
- { 0x05A, {{1,2}, {1,3}, {1,6}}},
- { 0x05C, {{1,2}, {1,3}, {1,6}}},
- { 0x063, {{1,2}, {1,4}, {1,4}}},
- { 0x06C, {{1,2}, {1,4}, {1,8}}},
- { 0x091, {{1,3}, {1,3}, {1,6}}},
- { 0x093, {{1,3}, {1,3}, {1,6}}},
- { 0x0A3, {{1,3}, {1,6}, {1,6}}},
- { 0x0DA, {{1,4}, {1,4}, {1,8}}},
- { 0x0DC, {{1,4}, {1,4}, {1,8}}},
- { 0x0EC, {{1,4}, {1,8}, {1,8}}},
- { 0x123, {{1,4}, {1,4}, {1,8}}},
- { 0x16C, {{1,4}, {1,8}, {1,8}}},
- };
-
- struct memclk_data {
- unsigned char multiplier;
- unsigned char divisor;
- };
- static struct memclk_data st40_memclk_table[8] = {
- {1,1}, // 000
- {1,2}, // 001
- {1,3}, // 010
- {2,3}, // 011
- {1,4}, // 100
- {1,6}, // 101
- {1,8}, // 110
- {1,8} // 111
- };
-
- unsigned long pvr;
-
- /*
- * This should probably be moved into the SH3 probing code, and then
- * use the processor structure to determine which CPU we are running
- * on.
- */
- pvr = ctrl_inl(CCN_PVR);
- printk("PVR %08x\n", pvr);
-
- if (((pvr >> CCN_PVR_CHIP_SHIFT) & CCN_PVR_CHIP_MASK) == CCN_PVR_CHIP_ST40STB1) {
- /*
- * Unfortunatly the STB1 FRQCR values are different from the
- * 7750 ones.
- */
- struct frqcr_data *d;
- int a;
- unsigned long memclkcr;
- struct memclk_data *e;
-
- for (a=0; a<ARRAY_SIZE(st40_frqcr_table); a++) {
- d = &st40_frqcr_table[a];
- if (d->frqcr == (frqcr & 0x1ff))
- break;
- }
- if (a == ARRAY_SIZE(st40_frqcr_table)) {
- d = st40_frqcr_table;
- printk("ERROR: Unrecognised FRQCR value, using default multipliers\n");
- }
-
- memclkcr = ctrl_inl(CLOCKGEN_MEMCLKCR);
- e = &st40_memclk_table[memclkcr & MEMCLKCR_RATIO_MASK];
-
- printk("Clock multipliers: CPU: %d/%d Bus: %d/%d Mem: %d/%d Periph: %d/%d\n",
- d->factor[0].multiplier, d->factor[0].divisor,
- d->factor[1].multiplier, d->factor[1].divisor,
- e->multiplier, e->divisor,
- d->factor[2].multiplier, d->factor[2].divisor);
-
- current_cpu_data.master_clock = current_cpu_data.module_clock *
- d->factor[2].divisor /
- d->factor[2].multiplier;
- current_cpu_data.bus_clock = current_cpu_data.master_clock *
- d->factor[1].multiplier /
- d->factor[1].divisor;
- current_cpu_data.memory_clock = current_cpu_data.master_clock *
- e->multiplier / e->divisor;
- current_cpu_data.cpu_clock = current_cpu_data.master_clock *
- d->factor[0].multiplier /
- d->factor[0].divisor;
-}
-
diff --git a/arch/sh/configs/hp680_defconfig b/arch/sh/configs/hp6xx_defconfig
index c85d3655b53c..b36f102cec81 100644
--- a/arch/sh/configs/hp680_defconfig
+++ b/arch/sh/configs/hp6xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-sh
-# Wed Mar 2 15:09:41 2005
+# Linux kernel version: 2.6.15-sh
+# Wed Jan 4 15:32:56 2006
#
CONFIG_SUPERH=y
CONFIG_UID16=y
@@ -17,31 +17,36 @@ CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_SYSCTL is not set
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
+CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -49,6 +54,24 @@ CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_MODULES is not set
#
+# Block layer
+#
+# CONFIG_LBD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
# System type
#
# CONFIG_SH_SOLUTION_ENGINE is not set
@@ -58,9 +81,7 @@ CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_SH_7751_SYSTEMH is not set
# CONFIG_SH_STB1_HARP is not set
# CONFIG_SH_STB1_OVERDRIVE is not set
-# CONFIG_SH_HP620 is not set
-CONFIG_SH_HP680=y
-# CONFIG_SH_HP690 is not set
+CONFIG_SH_HP6XX=y
# CONFIG_SH_CQREEK is not set
# CONFIG_SH_DMIDA is not set
# CONFIG_SH_EC3104 is not set
@@ -77,43 +98,90 @@ CONFIG_SH_HP680=y
# CONFIG_SH_RTS7751R2D is not set
# CONFIG_SH_EDOSK7705 is not set
# CONFIG_SH_SH4202_MICRODEV is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
# CONFIG_SH_UNKNOWN is not set
-# CONFIG_CPU_SH2 is not set
+
+#
+# Processor selection
+#
CONFIG_CPU_SH3=y
-# CONFIG_CPU_SH4 is not set
+
+#
+# SH-2 Processor Support
+#
# CONFIG_CPU_SUBTYPE_SH7604 is not set
+
+#
+# SH-3 Processor Support
+#
# CONFIG_CPU_SUBTYPE_SH7300 is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
# CONFIG_CPU_SUBTYPE_SH7708 is not set
CONFIG_CPU_SUBTYPE_SH7709=y
+
+#
+# SH-4 Processor Support
+#
# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# ST40 Processor Support
+#
# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+
+#
+# SH-4A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+
+#
+# Memory management options
+#
CONFIG_MMU=y
-# CONFIG_CMDLINE_BOOL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+# CONFIG_SH_WRITETHROUGH is not set
+# CONFIG_SH_OCRAM is not set
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x00400000
-CONFIG_MEMORY_SET=y
-# CONFIG_MEMORY_OVERRIDE is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_SH_RTC=y
# CONFIG_SH_DSP is not set
CONFIG_SH_ADC=y
-CONFIG_SH_HP600=y
-CONFIG_ZERO_PAGE_OFFSET=0x00001000
-CONFIG_BOOT_LINK_OFFSET=0x00800000
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_PREEMPT is not set
-# CONFIG_UBC_WAKEUP is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
-# CONFIG_SMP is not set
-CONFIG_SH_PCLK_CALC=y
-CONFIG_SH_PCLK_FREQ=1193182
+
+#
+# Timer support
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_PCLK_FREQ_BOOL=y
+CONFIG_SH_PCLK_FREQ=22110000
#
# CPU Frequency scaling
@@ -123,7 +191,10 @@ CONFIG_SH_PCLK_FREQ=1193182
#
# DMA support
#
-# CONFIG_SH_DMA is not set
+CONFIG_SH_DMA=y
+CONFIG_NR_ONCHIP_DMA_CHANNELS=4
+# CONFIG_NR_DMA_CHANNELS_BOOL is not set
+# CONFIG_DMA_PAGE_OPS is not set
#
# Companion Chips
@@ -132,21 +203,47 @@ CONFIG_HD6446X_SERIES=y
CONFIG_HD64461=y
# CONFIG_HD64465 is not set
CONFIG_HD64461_IRQ=36
-# CONFIG_HD64461_ENABLER is not set
+CONFIG_HD64461_IOBASE=0xb0000000
+CONFIG_HD64461_ENABLER=y
+
+#
+# Kernel features
+#
+# CONFIG_KEXEC is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_SMP is not set
#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+# Boot options
#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_UBC_WAKEUP is not set
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+CONFIG_ISA=y
# CONFIG_PCI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
-# CONFIG_PCCARD is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
#
# PC-card bridges
#
+# CONFIG_I82365 is not set
+# CONFIG_TCIC is not set
+CONFIG_HD64461_PCMCIA=y
+CONFIG_HD64461_PCMCIA_SOCKETS=1
+CONFIG_PCMCIA_PROBE=y
#
# PCI Hotplug Support
@@ -160,9 +257,9 @@ CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
#
-# SH initrd options
+# Networking
#
-# CONFIG_EMBEDDED_RAMDISK is not set
+# CONFIG_NET is not set
#
# Device Drivers
@@ -173,7 +270,11 @@ CONFIG_BINFMT_ELF=y
#
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
#
# Memory Technology Devices (MTD)
@@ -188,30 +289,20 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Plug and Play support
#
+# CONFIG_PNP is not set
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
@@ -224,6 +315,7 @@ CONFIG_BLK_DEV_IDE=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
@@ -235,6 +327,7 @@ CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDE_GENERIC=y
CONFIG_IDE_SH=y
# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_CHIPSETS is not set
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
@@ -242,9 +335,15 @@ CONFIG_IDE_SH=y
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
#
+# Old CD-ROM drivers (not SCSI, not IDE)
+#
+# CONFIG_CD_NO_IDESCSI is not set
+
+#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
@@ -252,6 +351,7 @@ CONFIG_IDE_SH=y
#
# Fusion MPT device support
#
+# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
@@ -263,9 +363,8 @@ CONFIG_IDE_SH=y
#
#
-# Networking support
+# Network device support
#
-# CONFIG_NET is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -296,17 +395,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -316,6 +404,15 @@ CONFIG_SERIO=y
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -353,10 +450,22 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# Ftape, the floppy tape device driver
#
-# CONFIG_DRM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
# CONFIG_RAW_DRIVER is not set
#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
# I2C support
#
# CONFIG_I2C is not set
@@ -367,10 +476,21 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
# Misc devices
#
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
@@ -383,27 +503,35 @@ CONFIG_LEGACY_PTY_COUNT=256
# Graphics support
#
CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_EPSON1355 is not set
+# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_HIT=y
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
-# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
# CONFIG_FONT_8x16 is not set
# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
CONFIG_FONT_PEARL_8x8=y
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
#
# Logo configuration
@@ -414,7 +542,22 @@ CONFIG_FONT_PEARL_8x8=y
#
# Sound
#
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+# CONFIG_SND is not set
+
+#
+# Open Sound System
+#
+CONFIG_SOUND_PRIME=y
+# CONFIG_OBSOLETE_OSS_DRIVER is not set
+# CONFIG_SOUND_MSNDCLAS is not set
+# CONFIG_SOUND_MSNDPIN is not set
+CONFIG_SOUND_SH_DAC_AUDIO=y
+CONFIG_SOUND_SH_DAC_AUDIO_CHANNEL=1
#
# USB support
@@ -423,7 +566,7 @@ CONFIG_FONT_PEARL_8x8=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
@@ -442,25 +585,29 @@ CONFIG_FONT_PEARL_8x8=y
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -471,8 +618,11 @@ CONFIG_DNOTIFY=y
#
# DOS/FAT/NT Filesystems
#
+CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
@@ -481,14 +631,11 @@ CONFIG_DNOTIFY=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -516,7 +663,46 @@ CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
#
# Profiling support
@@ -526,7 +712,9 @@ CONFIG_MSDOS_PARTITION=y
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
# CONFIG_FRAME_POINTER is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_KGDB is not set
@@ -550,5 +738,6 @@ CONFIG_MSDOS_PARTITION=y
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
diff --git a/arch/sh/drivers/dma/dma-api.c b/arch/sh/drivers/dma/dma-api.c
index 96e3036ec2bb..47c3e837599b 100644
--- a/arch/sh/drivers/dma/dma-api.c
+++ b/arch/sh/drivers/dma/dma-api.c
@@ -3,7 +3,7 @@
*
* SuperH-specific DMA management API
*
- * Copyright (C) 2003, 2004 Paul Mundt
+ * Copyright (C) 2003, 2004, 2005 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -15,6 +15,7 @@
#include <linux/spinlock.h>
#include <linux/proc_fs.h>
#include <linux/list.h>
+#include <linux/platform_device.h>
#include <asm/dma.h>
DEFINE_SPINLOCK(dma_spin_lock);
@@ -55,16 +56,14 @@ static LIST_HEAD(registered_dmac_list);
struct dma_info *get_dma_info(unsigned int chan)
{
- struct list_head *pos, *tmp;
+ struct dma_info *info;
unsigned int total = 0;
/*
* Look for each DMAC's range to determine who the owner of
* the channel is.
*/
- list_for_each_safe(pos, tmp, &registered_dmac_list) {
- struct dma_info *info = list_entry(pos, struct dma_info, list);
-
+ list_for_each_entry(info, &registered_dmac_list, list) {
total += info->nr_channels;
if (chan > total)
continue;
@@ -75,6 +74,20 @@ struct dma_info *get_dma_info(unsigned int chan)
return NULL;
}
+static unsigned int get_nr_channels(void)
+{
+ struct dma_info *info;
+ unsigned int nr = 0;
+
+ if (unlikely(list_empty(&registered_dmac_list)))
+ return nr;
+
+ list_for_each_entry(info, &registered_dmac_list, list)
+ nr += info->nr_channels;
+
+ return nr;
+}
+
struct dma_channel *get_dma_channel(unsigned int chan)
{
struct dma_info *info = get_dma_info(chan);
@@ -173,7 +186,7 @@ int dma_xfer(unsigned int chan, unsigned long from,
static int dma_read_proc(char *buf, char **start, off_t off,
int len, int *eof, void *data)
{
- struct list_head *pos, *tmp;
+ struct dma_info *info;
char *p = buf;
if (list_empty(&registered_dmac_list))
@@ -182,8 +195,7 @@ static int dma_read_proc(char *buf, char **start, off_t off,
/*
* Iterate over each registered DMAC
*/
- list_for_each_safe(pos, tmp, &registered_dmac_list) {
- struct dma_info *info = list_entry(pos, struct dma_info, list);
+ list_for_each_entry(info, &registered_dmac_list, list) {
int i;
/*
@@ -205,9 +217,9 @@ static int dma_read_proc(char *buf, char **start, off_t off,
#endif
-int __init register_dmac(struct dma_info *info)
+int register_dmac(struct dma_info *info)
{
- int i;
+ unsigned int total_channels, i;
INIT_LIST_HEAD(&info->list);
@@ -217,6 +229,11 @@ int __init register_dmac(struct dma_info *info)
BUG_ON((info->flags & DMAC_CHANNELS_CONFIGURED) && !info->channels);
+ info->pdev = platform_device_register_simple((char *)info->name, -1,
+ NULL, 0);
+ if (IS_ERR(info->pdev))
+ return PTR_ERR(info->pdev);
+
/*
* Don't touch pre-configured channels
*/
@@ -232,10 +249,12 @@ int __init register_dmac(struct dma_info *info)
memset(info->channels, 0, size);
}
+ total_channels = get_nr_channels();
for (i = 0; i < info->nr_channels; i++) {
struct dma_channel *chan = info->channels + i;
chan->chan = i;
+ chan->vchan = i + total_channels;
memcpy(chan->dev_id, "Unused", 7);
@@ -245,9 +264,7 @@ int __init register_dmac(struct dma_info *info)
init_MUTEX(&chan->sem);
init_waitqueue_head(&chan->wait_queue);
-#ifdef CONFIG_SYSFS
- dma_create_sysfs_files(chan);
-#endif
+ dma_create_sysfs_files(chan, info);
}
list_add(&info->list, &registered_dmac_list);
@@ -255,12 +272,18 @@ int __init register_dmac(struct dma_info *info)
return 0;
}
-void __exit unregister_dmac(struct dma_info *info)
+void unregister_dmac(struct dma_info *info)
{
+ unsigned int i;
+
+ for (i = 0; i < info->nr_channels; i++)
+ dma_remove_sysfs_files(info->channels + i, info);
+
if (!(info->flags & DMAC_CHANNELS_CONFIGURED))
kfree(info->channels);
list_del(&info->list);
+ platform_device_unregister(info->pdev);
}
static int __init dma_api_init(void)
diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c
index 231e3f6fb28f..5afab6f56ec3 100644
--- a/arch/sh/drivers/dma/dma-g2.c
+++ b/arch/sh/drivers/dma/dma-g2.c
@@ -140,7 +140,7 @@ static struct dma_ops g2_dma_ops = {
};
static struct dma_info g2_dma_info = {
- .name = "G2 DMA",
+ .name = "g2_dmac",
.nr_channels = 4,
.ops = &g2_dma_ops,
.flags = DMAC_CHANNELS_TEI_CAPABLE,
@@ -160,6 +160,7 @@ static int __init g2_dma_init(void)
static void __exit g2_dma_exit(void)
{
free_irq(HW_EVENT_G2_DMA, 0);
+ unregister_dmac(&g2_dma_info);
}
subsys_initcall(g2_dma_init);
diff --git a/arch/sh/drivers/dma/dma-isa.c b/arch/sh/drivers/dma/dma-isa.c
index 1c9bc45b8bcb..05a74ffdb68d 100644
--- a/arch/sh/drivers/dma/dma-isa.c
+++ b/arch/sh/drivers/dma/dma-isa.c
@@ -25,14 +25,14 @@
* such, this code is meant for only the simplest of tasks (and shouldn't be
* used in any new drivers at all).
*
- * It should also be noted that various functions here are labelled as
- * being deprecated. This is due to the fact that the ops->xfer() method is
- * the preferred way of doing things (as well as just grabbing the spinlock
- * directly). As such, any users of this interface will be warned rather
- * loudly.
+ * NOTE: ops->xfer() is the preferred way of doing things. However, there
+ * are some users of the ISA DMA API that exist in common code that we
+ * don't necessarily want to go out of our way to break, so we still
+ * allow for some compatability at that level. Any new code is strongly
+ * advised to run far away from the ISA DMA API and use the SH DMA API
+ * directly.
*/
-
-unsigned long __deprecated claim_dma_lock(void)
+unsigned long claim_dma_lock(void)
{
unsigned long flags;
@@ -42,19 +42,19 @@ unsigned long __deprecated claim_dma_lock(void)
}
EXPORT_SYMBOL(claim_dma_lock);
-void __deprecated release_dma_lock(unsigned long flags)
+void release_dma_lock(unsigned long flags)
{
spin_unlock_irqrestore(&dma_spin_lock, flags);
}
EXPORT_SYMBOL(release_dma_lock);
-void __deprecated disable_dma(unsigned int chan)
+void disable_dma(unsigned int chan)
{
/* Nothing */
}
EXPORT_SYMBOL(disable_dma);
-void __deprecated enable_dma(unsigned int chan)
+void enable_dma(unsigned int chan)
{
struct dma_info *info = get_dma_info(chan);
struct dma_channel *channel = &info->channels[chan];
diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c
index 2e1d58f2d1b9..df604975ccc8 100644
--- a/arch/sh/drivers/dma/dma-pvr2.c
+++ b/arch/sh/drivers/dma/dma-pvr2.c
@@ -80,7 +80,7 @@ static struct dma_ops pvr2_dma_ops = {
};
static struct dma_info pvr2_dma_info = {
- .name = "PowerVR 2 DMA",
+ .name = "pvr2_dmac",
.nr_channels = 1,
.ops = &pvr2_dma_ops,
.flags = DMAC_CHANNELS_TEI_CAPABLE,
@@ -98,6 +98,7 @@ static void __exit pvr2_dma_exit(void)
{
free_dma(PVR2_CASCADE_CHAN);
free_irq(HW_EVENT_PVR2_DMA, 0);
+ unregister_dmac(&pvr2_dma_info);
}
subsys_initcall(pvr2_dma_init);
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index 31dacd4444b2..cca26c4c9d1b 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -5,6 +5,7 @@
*
* Copyright (C) 2000 Takashi YOSHII
* Copyright (C) 2003, 2004 Paul Mundt
+ * Copyright (C) 2005 Andriy Skulysh
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -16,51 +17,28 @@
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <asm/dreamcast/dma.h>
#include <asm/signal.h>
#include <asm/irq.h>
#include <asm/dma.h>
#include <asm/io.h>
#include "dma-sh.h"
-/*
- * The SuperH DMAC supports a number of transmit sizes, we list them here,
- * with their respective values as they appear in the CHCR registers.
- *
- * Defaults to a 64-bit transfer size.
- */
-enum {
- XMIT_SZ_64BIT,
- XMIT_SZ_8BIT,
- XMIT_SZ_16BIT,
- XMIT_SZ_32BIT,
- XMIT_SZ_256BIT,
-};
-
-/*
- * The DMA count is defined as the number of bytes to transfer.
- */
-static unsigned int ts_shift[] = {
- [XMIT_SZ_64BIT] = 3,
- [XMIT_SZ_8BIT] = 0,
- [XMIT_SZ_16BIT] = 1,
- [XMIT_SZ_32BIT] = 2,
- [XMIT_SZ_256BIT] = 5,
-};
-
static inline unsigned int get_dmte_irq(unsigned int chan)
{
- unsigned int irq;
+ unsigned int irq = 0;
/*
* Normally we could just do DMTE0_IRQ + chan outright, though in the
* case of the 7751R, the DMTE IRQs for channels > 4 start right above
* the SCIF
*/
-
if (chan < 4) {
irq = DMTE0_IRQ + chan;
} else {
+#ifdef DMTE4_IRQ
irq = DMTE4_IRQ + chan - 4;
+#endif
}
return irq;
@@ -78,9 +56,7 @@ static inline unsigned int calc_xmit_shift(struct dma_channel *chan)
{
u32 chcr = ctrl_inl(CHCR[chan->chan]);
- chcr >>= 4;
-
- return ts_shift[chcr & 0x0007];
+ return ts_shift[(chcr & CHCR_TS_MASK)>>CHCR_TS_SHIFT];
}
/*
@@ -109,8 +85,13 @@ static irqreturn_t dma_tei(int irq, void *dev_id, struct pt_regs *regs)
static int sh_dmac_request_dma(struct dma_channel *chan)
{
+ char name[32];
+
+ snprintf(name, sizeof(name), "DMAC Transfer End (Channel %d)",
+ chan->chan);
+
return request_irq(get_dmte_irq(chan->chan), dma_tei,
- SA_INTERRUPT, "DMAC Transfer End", chan);
+ SA_INTERRUPT, name, chan);
}
static void sh_dmac_free_dma(struct dma_channel *chan)
@@ -118,10 +99,18 @@ static void sh_dmac_free_dma(struct dma_channel *chan)
free_irq(get_dmte_irq(chan->chan), chan);
}
-static void sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr)
+static void
+sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr)
{
if (!chcr)
- chcr = RS_DUAL;
+ chcr = RS_DUAL | CHCR_IE;
+
+ if (chcr & CHCR_IE) {
+ chcr &= ~CHCR_IE;
+ chan->flags |= DMA_TEI_CAPABLE;
+ } else {
+ chan->flags &= ~DMA_TEI_CAPABLE;
+ }
ctrl_outl(chcr, CHCR[chan->chan]);
@@ -130,22 +119,32 @@ static void sh_dmac_configure_channel(struct dma_channel *chan, unsigned long ch
static void sh_dmac_enable_dma(struct dma_channel *chan)
{
- int irq = get_dmte_irq(chan->chan);
+ int irq;
u32 chcr;
chcr = ctrl_inl(CHCR[chan->chan]);
- chcr |= CHCR_DE | CHCR_IE;
+ chcr |= CHCR_DE;
+
+ if (chan->flags & DMA_TEI_CAPABLE)
+ chcr |= CHCR_IE;
+
ctrl_outl(chcr, CHCR[chan->chan]);
- enable_irq(irq);
+ if (chan->flags & DMA_TEI_CAPABLE) {
+ irq = get_dmte_irq(chan->chan);
+ enable_irq(irq);
+ }
}
static void sh_dmac_disable_dma(struct dma_channel *chan)
{
- int irq = get_dmte_irq(chan->chan);
+ int irq;
u32 chcr;
- disable_irq(irq);
+ if (chan->flags & DMA_TEI_CAPABLE) {
+ irq = get_dmte_irq(chan->chan);
+ disable_irq(irq);
+ }
chcr = ctrl_inl(CHCR[chan->chan]);
chcr &= ~(CHCR_DE | CHCR_TE | CHCR_IE);
@@ -158,7 +157,7 @@ static int sh_dmac_xfer_dma(struct dma_channel *chan)
* If we haven't pre-configured the channel with special flags, use
* the defaults.
*/
- if (!(chan->flags & DMA_CONFIGURED))
+ if (unlikely(!(chan->flags & DMA_CONFIGURED)))
sh_dmac_configure_channel(chan, 0);
sh_dmac_disable_dma(chan);
@@ -178,9 +177,11 @@ static int sh_dmac_xfer_dma(struct dma_channel *chan)
* cascading to the PVR2 DMAC. In this case, we still need to write
* SAR and DAR, regardless of value, in order for cascading to work.
*/
- if (chan->sar || (mach_is_dreamcast() && chan->chan == 2))
+ if (chan->sar || (mach_is_dreamcast() &&
+ chan->chan == PVR2_CASCADE_CHAN))
ctrl_outl(chan->sar, SAR[chan->chan]);
- if (chan->dar || (mach_is_dreamcast() && chan->chan == 2))
+ if (chan->dar || (mach_is_dreamcast() &&
+ chan->chan == PVR2_CASCADE_CHAN))
ctrl_outl(chan->dar, DAR[chan->chan]);
ctrl_outl(chan->count >> calc_xmit_shift(chan), DMATCR[chan->chan]);
@@ -198,17 +199,38 @@ static int sh_dmac_get_dma_residue(struct dma_channel *chan)
return ctrl_inl(DMATCR[chan->chan]) << calc_xmit_shift(chan);
}
-#if defined(CONFIG_CPU_SH4)
-static irqreturn_t dma_err(int irq, void *dev_id, struct pt_regs *regs)
+#ifdef CONFIG_CPU_SUBTYPE_SH7780
+#define dmaor_read_reg() ctrl_inw(DMAOR)
+#define dmaor_write_reg(data) ctrl_outw(data, DMAOR)
+#else
+#define dmaor_read_reg() ctrl_inl(DMAOR)
+#define dmaor_write_reg(data) ctrl_outl(data, DMAOR)
+#endif
+
+static inline int dmaor_reset(void)
{
- unsigned long dmaor = ctrl_inl(DMAOR);
+ unsigned long dmaor = dmaor_read_reg();
+
+ /* Try to clear the error flags first, incase they are set */
+ dmaor &= ~(DMAOR_NMIF | DMAOR_AE);
+ dmaor_write_reg(dmaor);
- printk("DMAE: DMAOR=%lx\n", dmaor);
+ dmaor |= DMAOR_INIT;
+ dmaor_write_reg(dmaor);
- ctrl_outl(ctrl_inl(DMAOR)&~DMAOR_NMIF, DMAOR);
- ctrl_outl(ctrl_inl(DMAOR)&~DMAOR_AE, DMAOR);
- ctrl_outl(ctrl_inl(DMAOR)|DMAOR_DME, DMAOR);
+ /* See if we got an error again */
+ if ((dmaor_read_reg() & (DMAOR_AE | DMAOR_NMIF))) {
+ printk(KERN_ERR "dma-sh: Can't initialize DMAOR.\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+#if defined(CONFIG_CPU_SH4)
+static irqreturn_t dma_err(int irq, void *dev_id, struct pt_regs *regs)
+{
+ dmaor_reset();
disable_irq(irq);
return IRQ_HANDLED;
@@ -224,8 +246,8 @@ static struct dma_ops sh_dmac_ops = {
};
static struct dma_info sh_dmac_info = {
- .name = "SuperH DMAC",
- .nr_channels = 4,
+ .name = "sh_dmac",
+ .nr_channels = CONFIG_NR_ONCHIP_DMA_CHANNELS,
.ops = &sh_dmac_ops,
.flags = DMAC_CHANNELS_TEI_CAPABLE,
};
@@ -248,7 +270,13 @@ static int __init sh_dmac_init(void)
make_ipr_irq(irq, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY);
}
- ctrl_outl(0x8000 | DMAOR_DME, DMAOR);
+ /*
+ * Initialize DMAOR, and clean up any error flags that may have
+ * been set.
+ */
+ i = dmaor_reset();
+ if (i < 0)
+ return i;
return register_dmac(info);
}
@@ -258,10 +286,12 @@ static void __exit sh_dmac_exit(void)
#ifdef CONFIG_CPU_SH4
free_irq(DMAE_IRQ, 0);
#endif
+ unregister_dmac(&sh_dmac_info);
}
subsys_initcall(sh_dmac_init);
module_exit(sh_dmac_exit);
+MODULE_AUTHOR("Takashi YOSHII, Paul Mundt, Andriy Skulysh");
+MODULE_DESCRIPTION("SuperH On-Chip DMAC Support");
MODULE_LICENSE("GPL");
-
diff --git a/arch/sh/drivers/dma/dma-sh.h b/arch/sh/drivers/dma/dma-sh.h
index dd9d547539a2..0f591fbc922d 100644
--- a/arch/sh/drivers/dma/dma-sh.h
+++ b/arch/sh/drivers/dma/dma-sh.h
@@ -11,6 +11,8 @@
#ifndef __DMA_SH_H
#define __DMA_SH_H
+#include <asm/cpu/dma.h>
+
/* Definitions for the SuperH DMAC */
#define REQ_L 0x00000000
#define REQ_E 0x00080000
@@ -26,27 +28,47 @@
#define SM_DEC 0x00002000
#define RS_IN 0x00000200
#define RS_OUT 0x00000300
-#define TM_BURST 0x0000080
-#define TS_8 0x00000010
-#define TS_16 0x00000020
-#define TS_32 0x00000030
-#define TS_64 0x00000000
#define TS_BLK 0x00000040
#define CHCR_DE 0x00000001
#define CHCR_TE 0x00000002
#define CHCR_IE 0x00000004
-/* Define the default configuration for dual address memory-memory transfer.
- * The 0x400 value represents auto-request, external->external.
- */
-#define RS_DUAL (DM_INC | SM_INC | 0x400 | TS_32)
-
-#define DMAOR_COD 0x00000008
+/* DMAOR definitions */
#define DMAOR_AE 0x00000004
#define DMAOR_NMIF 0x00000002
#define DMAOR_DME 0x00000001
+/*
+ * Define the default configuration for dual address memory-memory transfer.
+ * The 0x400 value represents auto-request, external->external.
+ */
+#define RS_DUAL (DM_INC | SM_INC | 0x400 | TS_32)
+
#define MAX_DMAC_CHANNELS (CONFIG_NR_ONCHIP_DMA_CHANNELS)
+/*
+ * Subtypes that have fewer channels than this simply need to change
+ * CONFIG_NR_ONCHIP_DMA_CHANNELS. Likewise, subtypes with a larger number
+ * of channels should expand on this.
+ *
+ * For most subtypes we can easily figure these values out with some
+ * basic calculation, unfortunately on other subtypes these are more
+ * scattered, so we just leave it unrolled for simplicity.
+ */
+#define SAR ((unsigned long[]){SH_DMAC_BASE + 0x00, SH_DMAC_BASE + 0x10, \
+ SH_DMAC_BASE + 0x20, SH_DMAC_BASE + 0x30, \
+ SH_DMAC_BASE + 0x50, SH_DMAC_BASE + 0x60})
+#define DAR ((unsigned long[]){SH_DMAC_BASE + 0x04, SH_DMAC_BASE + 0x14, \
+ SH_DMAC_BASE + 0x24, SH_DMAC_BASE + 0x34, \
+ SH_DMAC_BASE + 0x54, SH_DMAC_BASE + 0x64})
+#define DMATCR ((unsigned long[]){SH_DMAC_BASE + 0x08, SH_DMAC_BASE + 0x18, \
+ SH_DMAC_BASE + 0x28, SH_DMAC_BASE + 0x38, \
+ SH_DMAC_BASE + 0x58, SH_DMAC_BASE + 0x68})
+#define CHCR ((unsigned long[]){SH_DMAC_BASE + 0x0c, SH_DMAC_BASE + 0x1c, \
+ SH_DMAC_BASE + 0x2c, SH_DMAC_BASE + 0x3c, \
+ SH_DMAC_BASE + 0x5c, SH_DMAC_BASE + 0x6c})
+
+#define DMAOR (SH_DMAC_BASE + 0x40)
+
#endif /* __DMA_SH_H */
diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c
index 6e3b58bd8795..70a5d82eb2f8 100644
--- a/arch/sh/drivers/dma/dma-sysfs.c
+++ b/arch/sh/drivers/dma/dma-sysfs.c
@@ -3,7 +3,7 @@
*
* sysfs interface for SH DMA API
*
- * Copyright (C) 2004 Paul Mundt
+ * Copyright (C) 2004, 2005 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -12,7 +12,9 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sysdev.h>
+#include <linux/platform_device.h>
#include <linux/module.h>
+#include <linux/err.h>
#include <linux/string.h>
#include <asm/dma.h>
@@ -77,7 +79,7 @@ static ssize_t dma_store_config(struct sys_device *dev,
unsigned long config;
config = simple_strtoul(buf, NULL, 0);
- dma_configure_channel(channel->chan, config);
+ dma_configure_channel(channel->vchan, config);
return count;
}
@@ -111,12 +113,13 @@ static SYSDEV_ATTR(field, S_IRUGO, dma_show_##field, NULL);
dma_ro_attr(count, "0x%08x\n");
dma_ro_attr(flags, "0x%08lx\n");
-int __init dma_create_sysfs_files(struct dma_channel *chan)
+int dma_create_sysfs_files(struct dma_channel *chan, struct dma_info *info)
{
struct sys_device *dev = &chan->dev;
+ char name[16];
int ret;
- dev->id = chan->chan;
+ dev->id = chan->vchan;
dev->cls = &dma_sysclass;
ret = sysdev_register(dev);
@@ -129,6 +132,24 @@ int __init dma_create_sysfs_files(struct dma_channel *chan)
sysdev_create_file(dev, &attr_flags);
sysdev_create_file(dev, &attr_config);
- return 0;
+ snprintf(name, sizeof(name), "dma%d", chan->chan);
+ return sysfs_create_link(&info->pdev->dev.kobj, &dev->kobj, name);
+}
+
+void dma_remove_sysfs_files(struct dma_channel *chan, struct dma_info *info)
+{
+ struct sys_device *dev = &chan->dev;
+ char name[16];
+
+ sysdev_remove_file(dev, &attr_dev_id);
+ sysdev_remove_file(dev, &attr_count);
+ sysdev_remove_file(dev, &attr_mode);
+ sysdev_remove_file(dev, &attr_flags);
+ sysdev_remove_file(dev, &attr_config);
+
+ snprintf(name, sizeof(name), "dma%d", chan->chan);
+ sysfs_remove_link(&info->pdev->dev.kobj, name);
+
+ sysdev_unregister(dev);
}
diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile
index 8b819698df14..7a86eeb22655 100644
--- a/arch/sh/kernel/Makefile
+++ b/arch/sh/kernel/Makefile
@@ -17,6 +17,4 @@ obj-$(CONFIG_SH_KGDB) += kgdb_stub.o kgdb_jmp.o
obj-$(CONFIG_SH_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
-USE_STANDARD_AS_RULE := true
-
+obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile
index cd43714df61a..5bfc33bec5d0 100644
--- a/arch/sh/kernel/cpu/Makefile
+++ b/arch/sh/kernel/cpu/Makefile
@@ -2,15 +2,12 @@
# Makefile for the Linux/SuperH CPU-specifc backends.
#
-obj-y := irq_ipr.o irq_imask.o init.o bus.o
+obj-y += irq/ init.o bus.o clock.o
obj-$(CONFIG_CPU_SH2) += sh2/
obj-$(CONFIG_CPU_SH3) += sh3/
obj-$(CONFIG_CPU_SH4) += sh4/
-obj-$(CONFIG_SH_RTC) += rtc.o
+obj-$(CONFIG_SH_RTC) += rtc.o
obj-$(CONFIG_UBC_WAKEUP) += ubc.o
-obj-$(CONFIG_SH_ADC) += adc.o
-
-USE_STANDARD_AS_RULE := true
-
+obj-$(CONFIG_SH_ADC) += adc.o
diff --git a/arch/sh/kernel/cpu/bus.c b/arch/sh/kernel/cpu/bus.c
index 3278d234bb1b..fc6c4bd40c65 100644
--- a/arch/sh/kernel/cpu/bus.c
+++ b/arch/sh/kernel/cpu/bus.c
@@ -109,6 +109,8 @@ int sh_device_register(struct sh_dev *dev)
/* This is needed for USB OHCI to work */
if (dev->dma_mask)
dev->dev.dma_mask = dev->dma_mask;
+ if (dev->coherent_dma_mask)
+ dev->dev.coherent_dma_mask = dev->coherent_dma_mask;
snprintf(dev->dev.bus_id, BUS_ID_SIZE, "%s%u",
dev->name, dev->dev_id);
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
new file mode 100644
index 000000000000..989e7fdd524d
--- /dev/null
+++ b/arch/sh/kernel/cpu/clock.c
@@ -0,0 +1,287 @@
+/*
+ * arch/sh/kernel/cpu/clock.c - SuperH clock framework
+ *
+ * Copyright (C) 2005 Paul Mundt
+ *
+ * This clock framework is derived from the OMAP version by:
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/kref.h>
+#include <linux/seq_file.h>
+#include <linux/err.h>
+#include <asm/clock.h>
+#include <asm/timer.h>
+
+static LIST_HEAD(clock_list);
+static DEFINE_SPINLOCK(clock_lock);
+static DECLARE_MUTEX(clock_list_sem);
+
+/*
+ * Each subtype is expected to define the init routines for these clocks,
+ * as each subtype (or processor family) will have these clocks at the
+ * very least. These are all provided through the CPG, which even some of
+ * the more quirky parts (such as ST40, SH4-202, etc.) still have.
+ *
+ * The processor-specific code is expected to register any additional
+ * clock sources that are of interest.
+ */
+static struct clk master_clk = {
+ .name = "master_clk",
+ .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES,
+#ifdef CONFIG_SH_PCLK_FREQ_BOOL
+ .rate = CONFIG_SH_PCLK_FREQ,
+#endif
+};
+
+static struct clk module_clk = {
+ .name = "module_clk",
+ .parent = &master_clk,
+ .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES,
+};
+
+static struct clk bus_clk = {
+ .name = "bus_clk",
+ .parent = &master_clk,
+ .flags = CLK_ALWAYS_ENABLED | CLK_RATE_PROPAGATES,
+};
+
+static struct clk cpu_clk = {
+ .name = "cpu_clk",
+ .parent = &master_clk,
+ .flags = CLK_ALWAYS_ENABLED,
+};
+
+/*
+ * The ordering of these clocks matters, do not change it.
+ */
+static struct clk *onchip_clocks[] = {
+ &master_clk,
+ &module_clk,
+ &bus_clk,
+ &cpu_clk,
+};
+
+static void propagate_rate(struct clk *clk)
+{
+ struct clk *clkp;
+
+ list_for_each_entry(clkp, &clock_list, node) {
+ if (likely(clkp->parent != clk))
+ continue;
+ if (likely(clkp->ops && clkp->ops->recalc))
+ clkp->ops->recalc(clkp);
+ }
+}
+
+int __clk_enable(struct clk *clk)
+{
+ /*
+ * See if this is the first time we're enabling the clock, some
+ * clocks that are always enabled still require "special"
+ * initialization. This is especially true if the clock mode
+ * changes and the clock needs to hunt for the proper set of
+ * divisors to use before it can effectively recalc.
+ */
+ if (unlikely(atomic_read(&clk->kref.refcount) == 1))
+ if (clk->ops && clk->ops->init)
+ clk->ops->init(clk);
+
+ if (clk->flags & CLK_ALWAYS_ENABLED)
+ return 0;
+
+ if (likely(clk->ops && clk->ops->enable))
+ clk->ops->enable(clk);
+
+ kref_get(&clk->kref);
+ return 0;
+}
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&clock_lock, flags);
+ ret = __clk_enable(clk);
+ spin_unlock_irqrestore(&clock_lock, flags);
+
+ return ret;
+}
+
+static void clk_kref_release(struct kref *kref)
+{
+ /* Nothing to do */
+}
+
+void __clk_disable(struct clk *clk)
+{
+ if (clk->flags & CLK_ALWAYS_ENABLED)
+ return;
+
+ kref_put(&clk->kref, clk_kref_release);
+}
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clock_lock, flags);
+ __clk_disable(clk);
+ spin_unlock_irqrestore(&clock_lock, flags);
+}
+
+int clk_register(struct clk *clk)
+{
+ down(&clock_list_sem);
+
+ list_add(&clk->node, &clock_list);
+ kref_init(&clk->kref);
+
+ up(&clock_list_sem);
+
+ return 0;
+}
+
+void clk_unregister(struct clk *clk)
+{
+ down(&clock_list_sem);
+ list_del(&clk->node);
+ up(&clock_list_sem);
+}
+
+inline unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ int ret = -EOPNOTSUPP;
+
+ if (likely(clk->ops && clk->ops->set_rate)) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&clock_lock, flags);
+ ret = clk->ops->set_rate(clk, rate);
+ spin_unlock_irqrestore(&clock_lock, flags);
+ }
+
+ if (unlikely(clk->flags & CLK_RATE_PROPAGATES))
+ propagate_rate(clk);
+
+ return ret;
+}
+
+void clk_recalc_rate(struct clk *clk)
+{
+ if (likely(clk->ops && clk->ops->recalc)) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&clock_lock, flags);
+ clk->ops->recalc(clk);
+ spin_unlock_irqrestore(&clock_lock, flags);
+ }
+
+ if (unlikely(clk->flags & CLK_RATE_PROPAGATES))
+ propagate_rate(clk);
+}
+
+struct clk *clk_get(const char *id)
+{
+ struct clk *p, *clk = ERR_PTR(-ENOENT);
+
+ down(&clock_list_sem);
+ list_for_each_entry(p, &clock_list, node) {
+ if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+ clk = p;
+ break;
+ }
+ }
+ up(&clock_list_sem);
+
+ return clk;
+}
+
+void clk_put(struct clk *clk)
+{
+ if (clk && !IS_ERR(clk))
+ module_put(clk->owner);
+}
+
+void __init __attribute__ ((weak))
+arch_init_clk_ops(struct clk_ops **ops, int type)
+{
+}
+
+int __init clk_init(void)
+{
+ int i, ret = 0;
+
+ if (unlikely(!master_clk.rate))
+ /*
+ * NOTE: This will break if the default divisor has been
+ * changed.
+ *
+ * No one should be changing the default on us however,
+ * expect that a sane value for CONFIG_SH_PCLK_FREQ will
+ * be defined in the event of a different divisor.
+ */
+ master_clk.rate = get_timer_frequency() * 4;
+
+ for (i = 0; i < ARRAY_SIZE(onchip_clocks); i++) {
+ struct clk *clk = onchip_clocks[i];
+
+ arch_init_clk_ops(&clk->ops, i);
+ ret |= clk_register(clk);
+ clk_enable(clk);
+ }
+
+ /* Kick the child clocks.. */
+ propagate_rate(&master_clk);
+ propagate_rate(&bus_clk);
+
+ return ret;
+}
+
+int show_clocks(struct seq_file *m)
+{
+ struct clk *clk;
+
+ list_for_each_entry_reverse(clk, &clock_list, node) {
+ unsigned long rate = clk_get_rate(clk);
+
+ /*
+ * Don't bother listing dummy clocks with no ancestry
+ * that only support enable and disable ops.
+ */
+ if (unlikely(!rate && !clk->parent))
+ continue;
+
+ seq_printf(m, "%-12s\t: %ld.%02ldMHz\n", clk->name,
+ rate / 1000000, (rate % 1000000) / 10000);
+ }
+
+ return 0;
+}
+
+EXPORT_SYMBOL_GPL(clk_register);
+EXPORT_SYMBOL_GPL(clk_unregister);
+EXPORT_SYMBOL_GPL(clk_get);
+EXPORT_SYMBOL_GPL(clk_put);
+EXPORT_SYMBOL_GPL(clk_enable);
+EXPORT_SYMBOL_GPL(clk_disable);
+EXPORT_SYMBOL_GPL(__clk_enable);
+EXPORT_SYMBOL_GPL(__clk_disable);
+EXPORT_SYMBOL_GPL(clk_get_rate);
+EXPORT_SYMBOL_GPL(clk_set_rate);
+EXPORT_SYMBOL_GPL(clk_recalc_rate);
diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile
new file mode 100644
index 000000000000..e3cccea15e1d
--- /dev/null
+++ b/arch/sh/kernel/cpu/irq/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the Linux/SuperH CPU-specifc IRQ handlers.
+#
+obj-y += ipr.o imask.o
+
+obj-$(CONFIG_CPU_HAS_PINT_IRQ) += pint.o
+obj-$(CONFIG_CPU_HAS_INTC2_IRQ) += intc2.o
diff --git a/arch/sh/kernel/cpu/irq_imask.c b/arch/sh/kernel/cpu/irq/imask.c
index a963d00a971e..baed9a550d39 100644
--- a/arch/sh/kernel/cpu/irq_imask.c
+++ b/arch/sh/kernel/cpu/irq/imask.c
@@ -1,16 +1,12 @@
-/* $Id: irq_imask.c,v 1.1.2.1 2002/11/17 10:53:43 mrbrown Exp $
- *
- * linux/arch/sh/kernel/irq_imask.c
+/*
+ * arch/sh/kernel/cpu/irq/imask.c
*
* Copyright (C) 1999, 2000 Niibe Yutaka
*
* Simple interrupt handling using IMASK of SR register.
*
*/
-
/* NOTE: Will not work on level 15 */
-
-
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/kernel_stat.h>
@@ -19,13 +15,11 @@
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/bitops.h>
-
-#include <asm/system.h>
-#include <asm/irq.h>
-
#include <linux/spinlock.h>
#include <linux/cache.h>
#include <linux/irq.h>
+#include <asm/system.h>
+#include <asm/irq.h>
/* Bitmap of IRQ masked */
static unsigned long imask_mask = 0x7fff;
@@ -40,7 +34,7 @@ static void end_imask_irq(unsigned int irq);
#define IMASK_PRIORITY 15
static unsigned int startup_imask_irq(unsigned int irq)
-{
+{
/* Nothing to do */
return 0; /* never anything pending */
}
diff --git a/arch/sh/kernel/cpu/irq/intc2.c b/arch/sh/kernel/cpu/irq/intc2.c
new file mode 100644
index 000000000000..06e8afab32e4
--- /dev/null
+++ b/arch/sh/kernel/cpu/irq/intc2.c
@@ -0,0 +1,284 @@
+/*
+ * Interrupt handling for INTC2-based IRQ.
+ *
+ * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
+ * Copyright (C) 2005, 2006 Paul Mundt (lethal@linux-sh.org)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * These are the "new Hitachi style" interrupts, as present on the
+ * Hitachi 7751, the STM ST40 STB1, SH7760, and SH7780.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/machvec.h>
+
+struct intc2_data {
+ unsigned char msk_offset;
+ unsigned char msk_shift;
+
+ int (*clear_irq) (int);
+};
+
+static struct intc2_data intc2_data[NR_INTC2_IRQS];
+
+static void enable_intc2_irq(unsigned int irq);
+static void disable_intc2_irq(unsigned int irq);
+
+/* shutdown is same as "disable" */
+#define shutdown_intc2_irq disable_intc2_irq
+
+static void mask_and_ack_intc2(unsigned int);
+static void end_intc2_irq(unsigned int irq);
+
+static unsigned int startup_intc2_irq(unsigned int irq)
+{
+ enable_intc2_irq(irq);
+ return 0; /* never anything pending */
+}
+
+static struct hw_interrupt_type intc2_irq_type = {
+ .typename = "INTC2-IRQ",
+ .startup = startup_intc2_irq,
+ .shutdown = shutdown_intc2_irq,
+ .enable = enable_intc2_irq,
+ .disable = disable_intc2_irq,
+ .ack = mask_and_ack_intc2,
+ .end = end_intc2_irq
+};
+
+static void disable_intc2_irq(unsigned int irq)
+{
+ int irq_offset = irq - INTC2_FIRST_IRQ;
+ int msk_shift, msk_offset;
+
+ /* Sanity check */
+ if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS))
+ return;
+
+ msk_shift = intc2_data[irq_offset].msk_shift;
+ msk_offset = intc2_data[irq_offset].msk_offset;
+
+ ctrl_outl(1 << msk_shift,
+ INTC2_BASE + INTC2_INTMSK_OFFSET + msk_offset);
+}
+
+static void enable_intc2_irq(unsigned int irq)
+{
+ int irq_offset = irq - INTC2_FIRST_IRQ;
+ int msk_shift, msk_offset;
+
+ /* Sanity check */
+ if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS))
+ return;
+
+ msk_shift = intc2_data[irq_offset].msk_shift;
+ msk_offset = intc2_data[irq_offset].msk_offset;
+
+ ctrl_outl(1 << msk_shift,
+ INTC2_BASE + INTC2_INTMSKCLR_OFFSET + msk_offset);
+}
+
+static void mask_and_ack_intc2(unsigned int irq)
+{
+ disable_intc2_irq(irq);
+}
+
+static void end_intc2_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+ enable_intc2_irq(irq);
+
+ if (unlikely(intc2_data[irq - INTC2_FIRST_IRQ].clear_irq))
+ intc2_data[irq - INTC2_FIRST_IRQ].clear_irq(irq);
+}
+
+/*
+ * Setup an INTC2 style interrupt.
+ * NOTE: Unlike IPR interrupts, parameters are not shifted by this code,
+ * allowing the use of the numbers straight out of the datasheet.
+ * For example:
+ * PIO1 which is INTPRI00[19,16] and INTMSK00[13]
+ * would be: ^ ^ ^ ^
+ * | | | |
+ * make_intc2_irq(84, 0, 16, 0, 13);
+ */
+void make_intc2_irq(unsigned int irq,
+ unsigned int ipr_offset, unsigned int ipr_shift,
+ unsigned int msk_offset, unsigned int msk_shift,
+ unsigned int priority)
+{
+ int irq_offset = irq - INTC2_FIRST_IRQ;
+ unsigned int flags;
+ unsigned long ipr;
+
+ if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS))
+ return;
+
+ disable_irq_nosync(irq);
+
+ /* Fill the data we need */
+ intc2_data[irq_offset].msk_offset = msk_offset;
+ intc2_data[irq_offset].msk_shift = msk_shift;
+ intc2_data[irq_offset].clear_irq = NULL;
+
+ /* Set the priority level */
+ local_irq_save(flags);
+
+ ipr = ctrl_inl(INTC2_BASE + INTC2_INTPRI_OFFSET + ipr_offset);
+ ipr &= ~(0xf << ipr_shift);
+ ipr |= priority << ipr_shift;
+ ctrl_outl(ipr, INTC2_BASE + INTC2_INTPRI_OFFSET + ipr_offset);
+
+ local_irq_restore(flags);
+
+ irq_desc[irq].handler = &intc2_irq_type;
+
+ disable_intc2_irq(irq);
+}
+
+static struct intc2_init {
+ unsigned short irq;
+ unsigned char ipr_offset, ipr_shift;
+ unsigned char msk_offset, msk_shift;
+ unsigned char priority;
+} intc2_init_data[] __initdata = {
+#if defined(CONFIG_CPU_SUBTYPE_ST40)
+ {64, 0, 0, 0, 0, 13}, /* PCI serr */
+ {65, 0, 4, 0, 1, 13}, /* PCI err */
+ {66, 0, 4, 0, 2, 13}, /* PCI ad */
+ {67, 0, 4, 0, 3, 13}, /* PCI pwd down */
+ {72, 0, 8, 0, 5, 13}, /* DMAC INT0 */
+ {73, 0, 8, 0, 6, 13}, /* DMAC INT1 */
+ {74, 0, 8, 0, 7, 13}, /* DMAC INT2 */
+ {75, 0, 8, 0, 8, 13}, /* DMAC INT3 */
+ {76, 0, 8, 0, 9, 13}, /* DMAC INT4 */
+ {78, 0, 8, 0, 11, 13}, /* DMAC ERR */
+ {80, 0, 12, 0, 12, 13}, /* PIO0 */
+ {84, 0, 16, 0, 13, 13}, /* PIO1 */
+ {88, 0, 20, 0, 14, 13}, /* PIO2 */
+ {112, 4, 0, 4, 0, 13}, /* Mailbox */
+ #ifdef CONFIG_CPU_SUBTYPE_ST40GX1
+ {116, 4, 4, 4, 4, 13}, /* SSC0 */
+ {120, 4, 8, 4, 8, 13}, /* IR Blaster */
+ {124, 4, 12, 4, 12, 13}, /* USB host */
+ {128, 4, 16, 4, 16, 13}, /* Video processor BLITTER */
+ {132, 4, 20, 4, 20, 13}, /* UART0 */
+ {134, 4, 20, 4, 22, 13}, /* UART2 */
+ {136, 4, 24, 4, 24, 13}, /* IO_PIO0 */
+ {140, 4, 28, 4, 28, 13}, /* EMPI */
+ {144, 8, 0, 8, 0, 13}, /* MAFE */
+ {148, 8, 4, 8, 4, 13}, /* PWM */
+ {152, 8, 8, 8, 8, 13}, /* SSC1 */
+ {156, 8, 12, 8, 12, 13}, /* IO_PIO1 */
+ {160, 8, 16, 8, 16, 13}, /* USB target */
+ {164, 8, 20, 8, 20, 13}, /* UART1 */
+ {168, 8, 24, 8, 24, 13}, /* Teletext */
+ {172, 8, 28, 8, 28, 13}, /* VideoSync VTG */
+ {173, 8, 28, 8, 29, 13}, /* VideoSync DVP0 */
+ {174, 8, 28, 8, 30, 13}, /* VideoSync DVP1 */
+#endif
+#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
+/*
+ * SH7760 INTC2-Style interrupts, vectors IRQ48-111 INTEVT 0x800-0xFE0
+ */
+ /* INTPRIO0 | INTMSK0 */
+ {48, 0, 28, 0, 31, 3}, /* IRQ 4 */
+ {49, 0, 24, 0, 30, 3}, /* IRQ 3 */
+ {50, 0, 20, 0, 29, 3}, /* IRQ 2 */
+ {51, 0, 16, 0, 28, 3}, /* IRQ 1 */
+ /* 52-55 (INTEVT 0x880-0x8E0) unused/reserved */
+ /* INTPRIO4 | INTMSK0 */
+ {56, 4, 28, 0, 25, 3}, /* HCAN2_CHAN0 */
+ {57, 4, 24, 0, 24, 3}, /* HCAN2_CHAN1 */
+ {58, 4, 20, 0, 23, 3}, /* I2S_CHAN0 */
+ {59, 4, 16, 0, 22, 3}, /* I2S_CHAN1 */
+ {60, 4, 12, 0, 21, 3}, /* AC97_CHAN0 */
+ {61, 4, 8, 0, 20, 3}, /* AC97_CHAN1 */
+ {62, 4, 4, 0, 19, 3}, /* I2C_CHAN0 */
+ {63, 4, 0, 0, 18, 3}, /* I2C_CHAN1 */
+ /* INTPRIO8 | INTMSK0 */
+ {52, 8, 16, 0, 11, 3}, /* SCIF0_ERI_IRQ */
+ {53, 8, 16, 0, 10, 3}, /* SCIF0_RXI_IRQ */
+ {54, 8, 16, 0, 9, 3}, /* SCIF0_BRI_IRQ */
+ {55, 8, 16, 0, 8, 3}, /* SCIF0_TXI_IRQ */
+ {64, 8, 28, 0, 17, 3}, /* USBHI_IRQ */
+ {65, 8, 24, 0, 16, 3}, /* LCDC */
+ /* 66, 67 unused */
+ {68, 8, 20, 0, 14, 13}, /* DMABRGI0_IRQ */
+ {69, 8, 20, 0, 13, 13}, /* DMABRGI1_IRQ */
+ {70, 8, 20, 0, 12, 13}, /* DMABRGI2_IRQ */
+ /* 71 unused */
+ {72, 8, 12, 0, 7, 3}, /* SCIF1_ERI_IRQ */
+ {73, 8, 12, 0, 6, 3}, /* SCIF1_RXI_IRQ */
+ {74, 8, 12, 0, 5, 3}, /* SCIF1_BRI_IRQ */
+ {75, 8, 12, 0, 4, 3}, /* SCIF1_TXI_IRQ */
+ {76, 8, 8, 0, 3, 3}, /* SCIF2_ERI_IRQ */
+ {77, 8, 8, 0, 2, 3}, /* SCIF2_RXI_IRQ */
+ {78, 8, 8, 0, 1, 3}, /* SCIF2_BRI_IRQ */
+ {79, 8, 8, 0, 0, 3}, /* SCIF2_TXI_IRQ */
+ /* | INTMSK4 */
+ {80, 8, 4, 4, 23, 3}, /* SIM_ERI */
+ {81, 8, 4, 4, 22, 3}, /* SIM_RXI */
+ {82, 8, 4, 4, 21, 3}, /* SIM_TXI */
+ {83, 8, 4, 4, 20, 3}, /* SIM_TEI */
+ {84, 8, 0, 4, 19, 3}, /* HSPII */
+ /* INTPRIOC | INTMSK4 */
+ /* 85-87 unused/reserved */
+ {88, 12, 20, 4, 18, 3}, /* MMCI0 */
+ {89, 12, 20, 4, 17, 3}, /* MMCI1 */
+ {90, 12, 20, 4, 16, 3}, /* MMCI2 */
+ {91, 12, 20, 4, 15, 3}, /* MMCI3 */
+ {92, 12, 12, 4, 6, 3}, /* MFI (unsure, bug? in my 7760 manual*/
+ /* 93-107 reserved/undocumented */
+ {108,12, 4, 4, 1, 3}, /* ADC */
+ {109,12, 0, 4, 0, 3}, /* CMTI */
+ /* 110-111 reserved/unused */
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+ { TIMER_IRQ, 0, 24, 0, INTC_TMU0_MSK, 2},
+#ifdef CONFIG_SH_RTC
+ { RTC_IRQ, 4, 0, 0, INTC_RTC_MSK, TIMER_PRIORITY },
+#endif
+ { SCIF0_ERI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
+ { SCIF0_RXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
+ { SCIF0_BRI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
+ { SCIF0_TXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
+
+ { SCIF1_ERI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },
+ { SCIF1_RXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },
+ { SCIF1_BRI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },
+ { SCIF1_TXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },
+
+ { PCIC0_IRQ, 0x10, 8, 0, INTC_PCIC0_MSK, PCIC0_PRIORITY },
+ { PCIC1_IRQ, 0x10, 0, 0, INTC_PCIC1_MSK, PCIC1_PRIORITY },
+ { PCIC2_IRQ, 0x14, 24, 0, INTC_PCIC2_MSK, PCIC2_PRIORITY },
+ { PCIC3_IRQ, 0x14, 16, 0, INTC_PCIC3_MSK, PCIC3_PRIORITY },
+ { PCIC4_IRQ, 0x14, 8, 0, INTC_PCIC4_MSK, PCIC4_PRIORITY },
+#endif
+};
+
+void __init init_IRQ_intc2(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(intc2_init_data); i++) {
+ struct intc2_init *p = intc2_init_data + i;
+ make_intc2_irq(p->irq, p->ipr_offset, p->ipr_shift,
+ p-> msk_offset, p->msk_shift, p->priority);
+ }
+}
+
+/* Adds a termination callback to the interrupt */
+void intc2_add_clear_irq(int irq, int (*fn)(int))
+{
+ if (unlikely(irq < INTC2_FIRST_IRQ))
+ return;
+
+ intc2_data[irq - INTC2_FIRST_IRQ].clear_irq = fn;
+}
+
diff --git a/arch/sh/kernel/cpu/irq_ipr.c b/arch/sh/kernel/cpu/irq/ipr.c
index 71f92096132b..fdbd718ae5c6 100644
--- a/arch/sh/kernel/cpu/irq_ipr.c
+++ b/arch/sh/kernel/cpu/irq/ipr.c
@@ -1,6 +1,5 @@
-/* $Id: irq_ipr.c,v 1.1.2.1 2002/11/17 10:53:43 mrbrown Exp $
- *
- * linux/arch/sh/kernel/irq_ipr.c
+/*
+ * arch/sh/kernel/cpu/irq/ipr.c
*
* Copyright (C) 1999 Niibe Yutaka & Takeshi Yaegashi
* Copyright (C) 2000 Kazumoto Kojima
@@ -109,7 +108,8 @@ static void end_ipr_irq(unsigned int irq)
enable_ipr_irq(irq);
}
-void make_ipr_irq(unsigned int irq, unsigned int addr, int pos, int priority)
+void make_ipr_irq(unsigned int irq, unsigned int addr, int pos,
+ int priority, int maskpos)
{
disable_irq_nosync(irq);
ipr_data[irq].addr = addr;
@@ -120,126 +120,47 @@ void make_ipr_irq(unsigned int irq, unsigned int addr, int pos, int priority)
disable_ipr_irq(irq);
}
-#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
-static unsigned char pint_map[256];
-static unsigned long portcr_mask = 0;
-
-static void enable_pint_irq(unsigned int irq);
-static void disable_pint_irq(unsigned int irq);
-
-/* shutdown is same as "disable" */
-#define shutdown_pint_irq disable_pint_irq
-
-static void mask_and_ack_pint(unsigned int);
-static void end_pint_irq(unsigned int irq);
-
-static unsigned int startup_pint_irq(unsigned int irq)
-{
- enable_pint_irq(irq);
- return 0; /* never anything pending */
-}
-
-static struct hw_interrupt_type pint_irq_type = {
- .typename = "PINT-IRQ",
- .startup = startup_pint_irq,
- .shutdown = shutdown_pint_irq,
- .enable = enable_pint_irq,
- .disable = disable_pint_irq,
- .ack = mask_and_ack_pint,
- .end = end_pint_irq
-};
-
-static void disable_pint_irq(unsigned int irq)
-{
- unsigned long val, flags;
-
- local_irq_save(flags);
- val = ctrl_inw(INTC_INTER);
- val &= ~(1 << (irq - PINT_IRQ_BASE));
- ctrl_outw(val, INTC_INTER); /* disable PINTn */
- portcr_mask &= ~(3 << (irq - PINT_IRQ_BASE)*2);
- local_irq_restore(flags);
-}
-
-static void enable_pint_irq(unsigned int irq)
-{
- unsigned long val, flags;
-
- local_irq_save(flags);
- val = ctrl_inw(INTC_INTER);
- val |= 1 << (irq - PINT_IRQ_BASE);
- ctrl_outw(val, INTC_INTER); /* enable PINTn */
- portcr_mask |= 3 << (irq - PINT_IRQ_BASE)*2;
- local_irq_restore(flags);
-}
-
-static void mask_and_ack_pint(unsigned int irq)
-{
- disable_pint_irq(irq);
-}
-
-static void end_pint_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- enable_pint_irq(irq);
-}
-
-void make_pint_irq(unsigned int irq)
-{
- disable_irq_nosync(irq);
- irq_desc[irq].handler = &pint_irq_type;
- disable_pint_irq(irq);
-}
-#endif
-
void __init init_IRQ(void)
{
-#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
- defined(CONFIG_CPU_SUBTYPE_SH7707) || \
- defined(CONFIG_CPU_SUBTYPE_SH7709)
- int i;
-#endif
-
- make_ipr_irq(TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY);
- make_ipr_irq(TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY);
+#ifndef CONFIG_CPU_SUBTYPE_SH7780
+ make_ipr_irq(TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY, 0);
+ make_ipr_irq(TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY, 0);
#if defined(CONFIG_SH_RTC)
- make_ipr_irq(RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY);
+ make_ipr_irq(RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY, 0);
#endif
#ifdef SCI_ERI_IRQ
- make_ipr_irq(SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY);
- make_ipr_irq(SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY);
- make_ipr_irq(SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY);
+ make_ipr_irq(SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY, 0);
+ make_ipr_irq(SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY, 0);
+ make_ipr_irq(SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY, 0);
#endif
#ifdef SCIF1_ERI_IRQ
- make_ipr_irq(SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY);
- make_ipr_irq(SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY);
- make_ipr_irq(SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY);
- make_ipr_irq(SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY);
+ make_ipr_irq(SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0);
+ make_ipr_irq(SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0);
+ make_ipr_irq(SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0);
+ make_ipr_irq(SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0);
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7300)
- make_ipr_irq(SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY);
- make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
- make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
- make_ipr_irq(VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY);
+ make_ipr_irq(SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY, 0);
+ make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY, 0);
+ make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY, 0);
+ make_ipr_irq(VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY, 0);
#endif
#ifdef SCIF_ERI_IRQ
- make_ipr_irq(SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY);
- make_ipr_irq(SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY);
- make_ipr_irq(SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY);
- make_ipr_irq(SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY);
+ make_ipr_irq(SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0);
+ make_ipr_irq(SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0);
+ make_ipr_irq(SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0);
+ make_ipr_irq(SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0);
#endif
#ifdef IRDA_ERI_IRQ
- make_ipr_irq(IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY);
- make_ipr_irq(IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY);
- make_ipr_irq(IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY);
- make_ipr_irq(IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY);
+ make_ipr_irq(IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0);
+ make_ipr_irq(IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0);
+ make_ipr_irq(IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0);
+ make_ipr_irq(IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0);
#endif
#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
@@ -254,86 +175,32 @@ void __init init_IRQ(void)
* You should set corresponding bits of PFC to "00"
* to enable these interrupts.
*/
- make_ipr_irq(IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY);
- make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY);
- make_ipr_irq(IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY);
- make_ipr_irq(IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY);
- make_ipr_irq(IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY);
- make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY);
-#if !defined(CONFIG_CPU_SUBTYPE_SH7300)
- make_ipr_irq(PINT0_IRQ, PINT0_IPR_ADDR, PINT0_IPR_POS, PINT0_PRIORITY);
- make_ipr_irq(PINT8_IRQ, PINT8_IPR_ADDR, PINT8_IPR_POS, PINT8_PRIORITY);
- enable_ipr_irq(PINT0_IRQ);
- enable_ipr_irq(PINT8_IRQ);
+ make_ipr_irq(IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY, 0);
+ make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY, 0);
+ make_ipr_irq(IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY, 0);
+ make_ipr_irq(IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY, 0);
+ make_ipr_irq(IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY, 0);
+ make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY, 0);
+#endif
+#endif
- for(i = 0; i < 16; i++)
- make_pint_irq(PINT_IRQ_BASE + i);
- for(i = 0; i < 256; i++)
- {
- if(i & 1) pint_map[i] = 0;
- else if(i & 2) pint_map[i] = 1;
- else if(i & 4) pint_map[i] = 2;
- else if(i & 8) pint_map[i] = 3;
- else if(i & 0x10) pint_map[i] = 4;
- else if(i & 0x20) pint_map[i] = 5;
- else if(i & 0x40) pint_map[i] = 6;
- else if(i & 0x80) pint_map[i] = 7;
- }
-#endif /* !CONFIG_CPU_SUBTYPE_SH7300 */
-#endif /* CONFIG_CPU_SUBTYPE_SH7707 || CONFIG_CPU_SUBTYPE_SH7709 || CONFIG_CPU_SUBTYPE_SH7300*/
+#ifdef CONFIG_CPU_HAS_PINT_IRQ
+ init_IRQ_pint();
+#endif
-#ifdef CONFIG_CPU_SUBTYPE_ST40
+#ifdef CONFIG_CPU_HAS_INTC2_IRQ
init_IRQ_intc2();
#endif
-
/* Perform the machine specific initialisation */
- if (sh_mv.mv_init_irq != NULL) {
+ if (sh_mv.mv_init_irq != NULL)
sh_mv.mv_init_irq();
- }
}
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
- defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+
+#if !defined(CONFIG_CPU_HAS_PINT_IRQ)
int ipr_irq_demux(int irq)
{
-#if !defined(CONFIG_CPU_SUBTYPE_SH7300)
- unsigned long creg, dreg, d, sav;
-
- if(irq == PINT0_IRQ)
- {
-#if defined(CONFIG_CPU_SUBTYPE_SH7707)
- creg = PORT_PACR;
- dreg = PORT_PADR;
-#else
- creg = PORT_PCCR;
- dreg = PORT_PCDR;
-#endif
- sav = ctrl_inw(creg);
- ctrl_outw(sav | portcr_mask, creg);
- d = (~ctrl_inb(dreg) ^ ctrl_inw(INTC_ICR2)) & ctrl_inw(INTC_INTER) & 0xff;
- ctrl_outw(sav, creg);
- if(d == 0) return irq;
- return PINT_IRQ_BASE + pint_map[d];
- }
- else if(irq == PINT8_IRQ)
- {
-#if defined(CONFIG_CPU_SUBTYPE_SH7707)
- creg = PORT_PBCR;
- dreg = PORT_PBDR;
-#else
- creg = PORT_PFCR;
- dreg = PORT_PFDR;
-#endif
- sav = ctrl_inw(creg);
- ctrl_outw(sav | (portcr_mask >> 16), creg);
- d = (~ctrl_inb(dreg) ^ (ctrl_inw(INTC_ICR2) >> 8)) & (ctrl_inw(INTC_INTER) >> 8) & 0xff;
- ctrl_outw(sav, creg);
- if(d == 0) return irq;
- return PINT_IRQ_BASE + 8 + pint_map[d];
- }
-#endif
return irq;
}
#endif
EXPORT_SYMBOL(make_ipr_irq);
-
diff --git a/arch/sh/kernel/cpu/irq/pint.c b/arch/sh/kernel/cpu/irq/pint.c
new file mode 100644
index 000000000000..95d6024fe1ae
--- /dev/null
+++ b/arch/sh/kernel/cpu/irq/pint.c
@@ -0,0 +1,169 @@
+/*
+ * arch/sh/kernel/cpu/irq/pint.c - Interrupt handling for PINT-based IRQs.
+ *
+ * Copyright (C) 1999 Niibe Yutaka & Takeshi Yaegashi
+ * Copyright (C) 2000 Kazumoto Kojima
+ * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/machvec.h>
+
+static unsigned char pint_map[256];
+static unsigned long portcr_mask;
+
+static void enable_pint_irq(unsigned int irq);
+static void disable_pint_irq(unsigned int irq);
+
+/* shutdown is same as "disable" */
+#define shutdown_pint_irq disable_pint_irq
+
+static void mask_and_ack_pint(unsigned int);
+static void end_pint_irq(unsigned int irq);
+
+static unsigned int startup_pint_irq(unsigned int irq)
+{
+ enable_pint_irq(irq);
+ return 0; /* never anything pending */
+}
+
+static struct hw_interrupt_type pint_irq_type = {
+ .typename = "PINT-IRQ",
+ .startup = startup_pint_irq,
+ .shutdown = shutdown_pint_irq,
+ .enable = enable_pint_irq,
+ .disable = disable_pint_irq,
+ .ack = mask_and_ack_pint,
+ .end = end_pint_irq
+};
+
+static void disable_pint_irq(unsigned int irq)
+{
+ unsigned long val, flags;
+
+ local_irq_save(flags);
+ val = ctrl_inw(INTC_INTER);
+ val &= ~(1 << (irq - PINT_IRQ_BASE));
+ ctrl_outw(val, INTC_INTER); /* disable PINTn */
+ portcr_mask &= ~(3 << (irq - PINT_IRQ_BASE)*2);
+ local_irq_restore(flags);
+}
+
+static void enable_pint_irq(unsigned int irq)
+{
+ unsigned long val, flags;
+
+ local_irq_save(flags);
+ val = ctrl_inw(INTC_INTER);
+ val |= 1 << (irq - PINT_IRQ_BASE);
+ ctrl_outw(val, INTC_INTER); /* enable PINTn */
+ portcr_mask |= 3 << (irq - PINT_IRQ_BASE)*2;
+ local_irq_restore(flags);
+}
+
+static void mask_and_ack_pint(unsigned int irq)
+{
+ disable_pint_irq(irq);
+}
+
+static void end_pint_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+ enable_pint_irq(irq);
+}
+
+void make_pint_irq(unsigned int irq)
+{
+ disable_irq_nosync(irq);
+ irq_desc[irq].handler = &pint_irq_type;
+ disable_pint_irq(irq);
+}
+
+void __init init_IRQ_pint(void)
+{
+ int i;
+
+ make_ipr_irq(PINT0_IRQ, PINT0_IPR_ADDR, PINT0_IPR_POS, PINT0_PRIORITY);
+ make_ipr_irq(PINT8_IRQ, PINT8_IPR_ADDR, PINT8_IPR_POS, PINT8_PRIORITY);
+
+ enable_irq(PINT0_IRQ);
+ enable_irq(PINT8_IRQ);
+
+ for(i = 0; i < 16; i++)
+ make_pint_irq(PINT_IRQ_BASE + i);
+
+ for(i = 0; i < 256; i++) {
+ if (i & 1)
+ pint_map[i] = 0;
+ else if (i & 2)
+ pint_map[i] = 1;
+ else if (i & 4)
+ pint_map[i] = 2;
+ else if (i & 8)
+ pint_map[i] = 3;
+ else if (i & 0x10)
+ pint_map[i] = 4;
+ else if (i & 0x20)
+ pint_map[i] = 5;
+ else if (i & 0x40)
+ pint_map[i] = 6;
+ else if (i & 0x80)
+ pint_map[i] = 7;
+ }
+}
+
+int ipr_irq_demux(int irq)
+{
+ unsigned long creg, dreg, d, sav;
+
+ if (irq == PINT0_IRQ) {
+#if defined(CONFIG_CPU_SUBTYPE_SH7707)
+ creg = PORT_PACR;
+ dreg = PORT_PADR;
+#else
+ creg = PORT_PCCR;
+ dreg = PORT_PCDR;
+#endif
+ sav = ctrl_inw(creg);
+ ctrl_outw(sav | portcr_mask, creg);
+ d = (~ctrl_inb(dreg) ^ ctrl_inw(INTC_ICR2)) &
+ ctrl_inw(INTC_INTER) & 0xff;
+ ctrl_outw(sav, creg);
+
+ if (d == 0)
+ return irq;
+
+ return PINT_IRQ_BASE + pint_map[d];
+ } else if (irq == PINT8_IRQ) {
+#if defined(CONFIG_CPU_SUBTYPE_SH7707)
+ creg = PORT_PBCR;
+ dreg = PORT_PBDR;
+#else
+ creg = PORT_PFCR;
+ dreg = PORT_PFDR;
+#endif
+ sav = ctrl_inw(creg);
+ ctrl_outw(sav | (portcr_mask >> 16), creg);
+ d = (~ctrl_inb(dreg) ^ (ctrl_inw(INTC_ICR2) >> 8)) &
+ (ctrl_inw(INTC_INTER) >> 8) & 0xff;
+ ctrl_outw(sav, creg);
+
+ if (d == 0)
+ return irq;
+
+ return PINT_IRQ_BASE + 8 + pint_map[d];
+ }
+
+ return irq;
+}
+
diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile
index a64532e4dc63..b54dbb9a0c86 100644
--- a/arch/sh/kernel/cpu/sh3/Makefile
+++ b/arch/sh/kernel/cpu/sh3/Makefile
@@ -4,3 +4,10 @@
obj-y := ex.o probe.o
+clock-$(CONFIG_CPU_SH3) := clock-sh3.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7300) := clock-sh7300.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7705) := clock-sh7705.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7709) := clock-sh7709.o
+
+obj-y += $(clock-y)
+
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh3.c b/arch/sh/kernel/cpu/sh3/clock-sh3.c
new file mode 100644
index 000000000000..c3c945958baf
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh3/clock-sh3.c
@@ -0,0 +1,89 @@
+/*
+ * arch/sh/kernel/cpu/sh3/clock-sh3.c
+ *
+ * Generic SH-3 support for the clock framework
+ *
+ * Copyright (C) 2005 Paul Mundt
+ *
+ * FRQCR parsing hacked out of arch/sh/kernel/time.c
+ *
+ * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
+ * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
+ * Copyright (C) 2002, 2003, 2004 Paul Mundt
+ * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int stc_multipliers[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
+static int ifc_divisors[] = { 1, 2, 3, 4, 1, 1, 1, 1 };
+static int pfc_divisors[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
+
+static void master_clk_init(struct clk *clk)
+{
+ int frqcr = ctrl_inw(FRQCR);
+ int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
+
+ clk->rate *= pfc_divisors[idx];
+}
+
+static struct clk_ops sh3_master_clk_ops = {
+ .init = master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+ int frqcr = ctrl_inw(FRQCR);
+ int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
+
+ clk->rate = clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct clk_ops sh3_module_clk_ops = {
+ .recalc = module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+ int frqcr = ctrl_inw(FRQCR);
+ int idx = ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4);
+
+ clk->rate = clk->parent->rate / stc_multipliers[idx];
+}
+
+static struct clk_ops sh3_bus_clk_ops = {
+ .recalc = bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+ int frqcr = ctrl_inw(FRQCR);
+ int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
+
+ clk->rate = clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct clk_ops sh3_cpu_clk_ops = {
+ .recalc = cpu_clk_recalc,
+};
+
+static struct clk_ops *sh3_clk_ops[] = {
+ &sh3_master_clk_ops,
+ &sh3_module_clk_ops,
+ &sh3_bus_clk_ops,
+ &sh3_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+ if (idx < ARRAY_SIZE(sh3_clk_ops))
+ *ops = sh3_clk_ops[idx];
+}
+
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7300.c b/arch/sh/kernel/cpu/sh3/clock-sh7300.c
new file mode 100644
index 000000000000..e804174b9625
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7300.c
@@ -0,0 +1,78 @@
+/*
+ * arch/sh/kernel/cpu/sh3/clock-sh7300.c
+ *
+ * SH7300 support for the clock framework
+ *
+ * Copyright (C) 2005 Paul Mundt
+ *
+ * FRQCR parsing hacked out of arch/sh/kernel/time.c
+ *
+ * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
+ * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
+ * Copyright (C) 2002, 2003, 2004 Paul Mundt
+ * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int md_table[] = { 1, 2, 3, 4, 6, 8, 12 };
+
+static void master_clk_init(struct clk *clk)
+{
+ clk->rate *= md_table[ctrl_inw(FRQCR) & 0x0007];
+}
+
+static struct clk_ops sh7300_master_clk_ops = {
+ .init = master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inw(FRQCR) & 0x0007);
+ clk->rate = clk->parent->rate / md_table[idx];
+}
+
+static struct clk_ops sh7300_module_clk_ops = {
+ .recalc = module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inw(FRQCR) & 0x0700) >> 8;
+ clk->rate = clk->parent->rate / md_table[idx];
+}
+
+static struct clk_ops sh7300_bus_clk_ops = {
+ .recalc = bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inw(FRQCR) & 0x0070) >> 4;
+ clk->rate = clk->parent->rate / md_table[idx];
+}
+
+static struct clk_ops sh7300_cpu_clk_ops = {
+ .recalc = cpu_clk_recalc,
+};
+
+static struct clk_ops *sh7300_clk_ops[] = {
+ &sh7300_master_clk_ops,
+ &sh7300_module_clk_ops,
+ &sh7300_bus_clk_ops,
+ &sh7300_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+ if (idx < ARRAY_SIZE(sh7300_clk_ops))
+ *ops = sh7300_clk_ops[idx];
+}
+
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7705.c b/arch/sh/kernel/cpu/sh3/clock-sh7705.c
new file mode 100644
index 000000000000..dfdbf3277fd7
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7705.c
@@ -0,0 +1,84 @@
+/*
+ * arch/sh/kernel/cpu/sh3/clock-sh7705.c
+ *
+ * SH7705 support for the clock framework
+ *
+ * Copyright (C) 2005 Paul Mundt
+ *
+ * FRQCR parsing hacked out of arch/sh/kernel/time.c
+ *
+ * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
+ * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
+ * Copyright (C) 2002, 2003, 2004 Paul Mundt
+ * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+/*
+ * SH7705 uses the same divisors as the generic SH-3 case, it's just the
+ * FRQCR layout that is a bit different..
+ */
+static int stc_multipliers[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
+static int ifc_divisors[] = { 1, 2, 3, 4, 1, 1, 1, 1 };
+static int pfc_divisors[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
+
+static void master_clk_init(struct clk *clk)
+{
+ clk->rate *= pfc_divisors[ctrl_inw(FRQCR) & 0x0003];
+}
+
+static struct clk_ops sh7705_master_clk_ops = {
+ .init = master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+ int idx = ctrl_inw(FRQCR) & 0x0003;
+ clk->rate = clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct clk_ops sh7705_module_clk_ops = {
+ .recalc = module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inw(FRQCR) & 0x0300) >> 8;
+ clk->rate = clk->parent->rate / stc_multipliers[idx];
+}
+
+static struct clk_ops sh7705_bus_clk_ops = {
+ .recalc = bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inw(FRQCR) & 0x0030) >> 4;
+ clk->rate = clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct clk_ops sh7705_cpu_clk_ops = {
+ .recalc = cpu_clk_recalc,
+};
+
+static struct clk_ops *sh7705_clk_ops[] = {
+ &sh7705_master_clk_ops,
+ &sh7705_module_clk_ops,
+ &sh7705_bus_clk_ops,
+ &sh7705_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+ if (idx < ARRAY_SIZE(sh7705_clk_ops))
+ *ops = sh7705_clk_ops[idx];
+}
+
diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7709.c b/arch/sh/kernel/cpu/sh3/clock-sh7709.c
new file mode 100644
index 000000000000..10461a745e5f
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh3/clock-sh7709.c
@@ -0,0 +1,96 @@
+/*
+ * arch/sh/kernel/cpu/sh3/clock-sh7709.c
+ *
+ * SH7709 support for the clock framework
+ *
+ * Copyright (C) 2005 Andriy Skulysh
+ *
+ * Based on arch/sh/kernel/cpu/sh3/clock-sh7705.c
+ * Copyright (C) 2005 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int stc_multipliers[] = { 1, 2, 4, 8, 3, 6, 1, 1 };
+static int ifc_divisors[] = { 1, 2, 4, 1, 3, 1, 1, 1 };
+static int pfc_divisors[] = { 1, 2, 4, 1, 3, 6, 1, 1 };
+
+static void set_bus_parent(struct clk *clk)
+{
+ struct clk *bus_clk = clk_get("bus_clk");
+ clk->parent = bus_clk;
+ clk_put(bus_clk);
+}
+
+static void master_clk_init(struct clk *clk)
+{
+ int frqcr = ctrl_inw(FRQCR);
+ int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
+
+ clk->rate *= pfc_divisors[idx];
+}
+
+static struct clk_ops sh7709_master_clk_ops = {
+ .init = master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+ int frqcr = ctrl_inw(FRQCR);
+ int idx = ((frqcr & 0x2000) >> 11) | (frqcr & 0x0003);
+
+ clk->rate = clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct clk_ops sh7709_module_clk_ops = {
+#ifdef CLOCK_MODE_0_1_2_7
+ .init = set_bus_parent,
+#endif
+ .recalc = module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+ int frqcr = ctrl_inw(FRQCR);
+ int idx = (frqcr & 0x0080) ?
+ ((frqcr & 0x8000) >> 13) | ((frqcr & 0x0030) >> 4) : 1;
+
+ clk->rate = clk->parent->rate * stc_multipliers[idx];
+}
+
+static struct clk_ops sh7709_bus_clk_ops = {
+ .recalc = bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+ int frqcr = ctrl_inw(FRQCR);
+ int idx = ((frqcr & 0x4000) >> 12) | ((frqcr & 0x000c) >> 2);
+
+ clk->rate = clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct clk_ops sh7709_cpu_clk_ops = {
+ .init = set_bus_parent,
+ .recalc = cpu_clk_recalc,
+};
+
+static struct clk_ops *sh7709_clk_ops[] = {
+ &sh7709_master_clk_ops,
+ &sh7709_module_clk_ops,
+ &sh7709_bus_clk_ops,
+ &sh7709_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+ if (idx < ARRAY_SIZE(sh7709_clk_ops))
+ *ops = sh7709_clk_ops[idx];
+}
diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile
index ead1071eac73..3d5cafc71ae3 100644
--- a/arch/sh/kernel/cpu/sh4/Makefile
+++ b/arch/sh/kernel/cpu/sh4/Makefile
@@ -5,6 +5,15 @@
obj-y := ex.o probe.o
obj-$(CONFIG_SH_FPU) += fpu.o
-obj-$(CONFIG_CPU_SUBTYPE_ST40STB1) += irq_intc2.o
obj-$(CONFIG_SH_STORE_QUEUES) += sq.o
+# Primary on-chip clocks (common)
+clock-$(CONFIG_CPU_SH4) := clock-sh4.o
+clock-$(CONFIG_CPU_SUBTYPE_SH73180) := clock-sh73180.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7770) := clock-sh7770.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o
+
+# Additional clocks by subtype
+clock-$(CONFIG_CPU_SUBTYPE_SH4_202) += clock-sh4-202.o
+
+obj-y += $(clock-y)
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4-202.c b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
new file mode 100644
index 000000000000..bfdf5fe8d948
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4/clock-sh4-202.c
@@ -0,0 +1,179 @@
+/*
+ * arch/sh/kernel/cpu/sh4/clock-sh4-202.c
+ *
+ * Additional SH4-202 support for the clock framework
+ *
+ * Copyright (C) 2005 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+#define CPG2_FRQCR3 0xfe0a0018
+
+static int frqcr3_divisors[] = { 1, 2, 3, 4, 6, 8, 16 };
+static int frqcr3_values[] = { 0, 1, 2, 3, 4, 5, 6 };
+
+static void emi_clk_recalc(struct clk *clk)
+{
+ int idx = ctrl_inl(CPG2_FRQCR3) & 0x0007;
+ clk->rate = clk->parent->rate / frqcr3_divisors[idx];
+}
+
+static inline int frqcr3_lookup(struct clk *clk, unsigned long rate)
+{
+ int divisor = clk->parent->rate / rate;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++)
+ if (frqcr3_divisors[i] == divisor)
+ return frqcr3_values[i];
+
+ /* Safe fallback */
+ return 5;
+}
+
+static struct clk_ops sh4202_emi_clk_ops = {
+ .recalc = emi_clk_recalc,
+};
+
+static struct clk sh4202_emi_clk = {
+ .name = "emi_clk",
+ .flags = CLK_ALWAYS_ENABLED,
+ .ops = &sh4202_emi_clk_ops,
+};
+
+static void femi_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inl(CPG2_FRQCR3) >> 3) & 0x0007;
+ clk->rate = clk->parent->rate / frqcr3_divisors[idx];
+}
+
+static struct clk_ops sh4202_femi_clk_ops = {
+ .recalc = femi_clk_recalc,
+};
+
+static struct clk sh4202_femi_clk = {
+ .name = "femi_clk",
+ .flags = CLK_ALWAYS_ENABLED,
+ .ops = &sh4202_femi_clk_ops,
+};
+
+static void shoc_clk_init(struct clk *clk)
+{
+ int i;
+
+ /*
+ * For some reason, the shoc_clk seems to be set to some really
+ * insane value at boot (values outside of the allowable frequency
+ * range for instance). We deal with this by scaling it back down
+ * to something sensible just in case.
+ *
+ * Start scaling from the high end down until we find something
+ * that passes rate verification..
+ */
+ for (i = 0; i < ARRAY_SIZE(frqcr3_divisors); i++) {
+ int divisor = frqcr3_divisors[i];
+
+ if (clk->ops->set_rate(clk, clk->parent->rate / divisor) == 0)
+ break;
+ }
+
+ WARN_ON(i == ARRAY_SIZE(frqcr3_divisors)); /* Undefined clock */
+}
+
+static void shoc_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inl(CPG2_FRQCR3) >> 6) & 0x0007;
+ clk->rate = clk->parent->rate / frqcr3_divisors[idx];
+}
+
+static int shoc_clk_verify_rate(struct clk *clk, unsigned long rate)
+{
+ struct clk *bclk = clk_get("bus_clk");
+ unsigned long bclk_rate = clk_get_rate(bclk);
+
+ clk_put(bclk);
+
+ if (rate > bclk_rate)
+ return 1;
+ if (rate > 66000000)
+ return 1;
+
+ return 0;
+}
+
+static int shoc_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long frqcr3;
+ unsigned int tmp;
+
+ /* Make sure we have something sensible to switch to */
+ if (shoc_clk_verify_rate(clk, rate) != 0)
+ return -EINVAL;
+
+ tmp = frqcr3_lookup(clk, rate);
+
+ frqcr3 = ctrl_inl(CPG2_FRQCR3);
+ frqcr3 &= ~(0x0007 << 6);
+ frqcr3 |= tmp << 6;
+ ctrl_outl(frqcr3, CPG2_FRQCR3);
+
+ clk->rate = clk->parent->rate / frqcr3_divisors[tmp];
+
+ return 0;
+}
+
+static struct clk_ops sh4202_shoc_clk_ops = {
+ .init = shoc_clk_init,
+ .recalc = shoc_clk_recalc,
+ .set_rate = shoc_clk_set_rate,
+};
+
+static struct clk sh4202_shoc_clk = {
+ .name = "shoc_clk",
+ .flags = CLK_ALWAYS_ENABLED,
+ .ops = &sh4202_shoc_clk_ops,
+};
+
+static struct clk *sh4202_onchip_clocks[] = {
+ &sh4202_emi_clk,
+ &sh4202_femi_clk,
+ &sh4202_shoc_clk,
+};
+
+static int __init sh4202_clk_init(void)
+{
+ struct clk *clk = clk_get("master_clk");
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(sh4202_onchip_clocks); i++) {
+ struct clk *clkp = sh4202_onchip_clocks[i];
+
+ clkp->parent = clk;
+ clk_register(clkp);
+ clk_enable(clkp);
+ }
+
+ /*
+ * Now that we have the rest of the clocks registered, we need to
+ * force the parent clock to propagate so that these clocks will
+ * automatically figure out their rate. We cheat by handing the
+ * parent clock its current rate and forcing child propagation.
+ */
+ clk_set_rate(clk, clk_get_rate(clk));
+
+ clk_put(clk);
+
+ return 0;
+}
+
+arch_initcall(sh4202_clk_init);
+
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh4.c b/arch/sh/kernel/cpu/sh4/clock-sh4.c
new file mode 100644
index 000000000000..dca9f87a12d6
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4/clock-sh4.c
@@ -0,0 +1,80 @@
+/*
+ * arch/sh/kernel/cpu/sh4/clock-sh4.c
+ *
+ * Generic SH-4 support for the clock framework
+ *
+ * Copyright (C) 2005 Paul Mundt
+ *
+ * FRQCR parsing hacked out of arch/sh/kernel/time.c
+ *
+ * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
+ * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
+ * Copyright (C) 2002, 2003, 2004 Paul Mundt
+ * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int ifc_divisors[] = { 1, 2, 3, 4, 6, 8, 1, 1 };
+#define bfc_divisors ifc_divisors /* Same */
+static int pfc_divisors[] = { 2, 3, 4, 6, 8, 2, 2, 2 };
+
+static void master_clk_init(struct clk *clk)
+{
+ clk->rate *= pfc_divisors[ctrl_inw(FRQCR) & 0x0007];
+}
+
+static struct clk_ops sh4_master_clk_ops = {
+ .init = master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inw(FRQCR) & 0x0007);
+ clk->rate = clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct clk_ops sh4_module_clk_ops = {
+ .recalc = module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inw(FRQCR) >> 3) & 0x0007;
+ clk->rate = clk->parent->rate / bfc_divisors[idx];
+}
+
+static struct clk_ops sh4_bus_clk_ops = {
+ .recalc = bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inw(FRQCR) >> 6) & 0x0007;
+ clk->rate = clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct clk_ops sh4_cpu_clk_ops = {
+ .recalc = cpu_clk_recalc,
+};
+
+static struct clk_ops *sh4_clk_ops[] = {
+ &sh4_master_clk_ops,
+ &sh4_module_clk_ops,
+ &sh4_bus_clk_ops,
+ &sh4_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+ if (idx < ARRAY_SIZE(sh4_clk_ops))
+ *ops = sh4_clk_ops[idx];
+}
+
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh73180.c b/arch/sh/kernel/cpu/sh4/clock-sh73180.c
new file mode 100644
index 000000000000..2fa5cb2ae68d
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4/clock-sh73180.c
@@ -0,0 +1,81 @@
+/*
+ * arch/sh/kernel/cpu/sh4/clock-sh73180.c
+ *
+ * SH73180 support for the clock framework
+ *
+ * Copyright (C) 2005 Paul Mundt
+ *
+ * FRQCR parsing hacked out of arch/sh/kernel/time.c
+ *
+ * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
+ * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
+ * Copyright (C) 2002, 2003, 2004 Paul Mundt
+ * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+/*
+ * SH73180 uses a common set of divisors, so this is quite simple..
+ */
+static int divisors[] = { 1, 2, 3, 4, 6, 8, 12, 16 };
+
+static void master_clk_init(struct clk *clk)
+{
+ clk->rate *= divisors[ctrl_inl(FRQCR) & 0x0007];
+}
+
+static struct clk_ops sh73180_master_clk_ops = {
+ .init = master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inl(FRQCR) & 0x0007);
+ clk->rate = clk->parent->rate / divisors[idx];
+}
+
+static struct clk_ops sh73180_module_clk_ops = {
+ .recalc = module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inl(FRQCR) >> 12) & 0x0007;
+ clk->rate = clk->parent->rate / divisors[idx];
+}
+
+static struct clk_ops sh73180_bus_clk_ops = {
+ .recalc = bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inl(FRQCR) >> 20) & 0x0007;
+ clk->rate = clk->parent->rate / divisors[idx];
+}
+
+static struct clk_ops sh73180_cpu_clk_ops = {
+ .recalc = cpu_clk_recalc,
+};
+
+static struct clk_ops *sh73180_clk_ops[] = {
+ &sh73180_master_clk_ops,
+ &sh73180_module_clk_ops,
+ &sh73180_bus_clk_ops,
+ &sh73180_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+ if (idx < ARRAY_SIZE(sh73180_clk_ops))
+ *ops = sh73180_clk_ops[idx];
+}
+
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh7770.c b/arch/sh/kernel/cpu/sh4/clock-sh7770.c
new file mode 100644
index 000000000000..c8694bac6477
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4/clock-sh7770.c
@@ -0,0 +1,73 @@
+/*
+ * arch/sh/kernel/cpu/sh4/clock-sh7770.c
+ *
+ * SH7770 support for the clock framework
+ *
+ * Copyright (C) 2005 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int ifc_divisors[] = { 1, 1, 1, 1, 1, 1, 1, 1 };
+static int bfc_divisors[] = { 1, 1, 1, 1, 1, 8,12, 1 };
+static int pfc_divisors[] = { 1, 8, 1,10,12,16, 1, 1 };
+
+static void master_clk_init(struct clk *clk)
+{
+ clk->rate *= pfc_divisors[(ctrl_inl(FRQCR) >> 28) & 0x000f];
+}
+
+static struct clk_ops sh7770_master_clk_ops = {
+ .init = master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQCR) >> 28) & 0x000f);
+ clk->rate = clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct clk_ops sh7770_module_clk_ops = {
+ .recalc = module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inl(FRQCR) & 0x000f);
+ clk->rate = clk->parent->rate / bfc_divisors[idx];
+}
+
+static struct clk_ops sh7770_bus_clk_ops = {
+ .recalc = bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQCR) >> 24) & 0x000f);
+ clk->rate = clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct clk_ops sh7770_cpu_clk_ops = {
+ .recalc = cpu_clk_recalc,
+};
+
+static struct clk_ops *sh7770_clk_ops[] = {
+ &sh7770_master_clk_ops,
+ &sh7770_module_clk_ops,
+ &sh7770_bus_clk_ops,
+ &sh7770_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+ if (idx < ARRAY_SIZE(sh7770_clk_ops))
+ *ops = sh7770_clk_ops[idx];
+}
+
diff --git a/arch/sh/kernel/cpu/sh4/clock-sh7780.c b/arch/sh/kernel/cpu/sh4/clock-sh7780.c
new file mode 100644
index 000000000000..93ad367342c9
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh4/clock-sh7780.c
@@ -0,0 +1,126 @@
+/*
+ * arch/sh/kernel/cpu/sh4/clock-sh7780.c
+ *
+ * SH7780 support for the clock framework
+ *
+ * Copyright (C) 2005 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/clock.h>
+#include <asm/freq.h>
+#include <asm/io.h>
+
+static int ifc_divisors[] = { 2, 4 };
+static int bfc_divisors[] = { 1, 1, 1, 8, 12, 16, 24, 1 };
+static int pfc_divisors[] = { 1, 24, 24, 1 };
+static int cfc_divisors[] = { 1, 1, 4, 1, 6, 1, 1, 1 };
+
+static void master_clk_init(struct clk *clk)
+{
+ clk->rate *= pfc_divisors[ctrl_inl(FRQCR) & 0x0003];
+}
+
+static struct clk_ops sh7780_master_clk_ops = {
+ .init = master_clk_init,
+};
+
+static void module_clk_recalc(struct clk *clk)
+{
+ int idx = (ctrl_inl(FRQCR) & 0x0003);
+ clk->rate = clk->parent->rate / pfc_divisors[idx];
+}
+
+static struct clk_ops sh7780_module_clk_ops = {
+ .recalc = module_clk_recalc,
+};
+
+static void bus_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQCR) >> 16) & 0x0007);
+ clk->rate = clk->parent->rate / bfc_divisors[idx];
+}
+
+static struct clk_ops sh7780_bus_clk_ops = {
+ .recalc = bus_clk_recalc,
+};
+
+static void cpu_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQCR) >> 24) & 0x0001);
+ clk->rate = clk->parent->rate / ifc_divisors[idx];
+}
+
+static struct clk_ops sh7780_cpu_clk_ops = {
+ .recalc = cpu_clk_recalc,
+};
+
+static struct clk_ops *sh7780_clk_ops[] = {
+ &sh7780_master_clk_ops,
+ &sh7780_module_clk_ops,
+ &sh7780_bus_clk_ops,
+ &sh7780_cpu_clk_ops,
+};
+
+void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
+{
+ if (idx < ARRAY_SIZE(sh7780_clk_ops))
+ *ops = sh7780_clk_ops[idx];
+}
+
+static void shyway_clk_recalc(struct clk *clk)
+{
+ int idx = ((ctrl_inl(FRQCR) >> 20) & 0x0007);
+ clk->rate = clk->parent->rate / cfc_divisors[idx];
+}
+
+static struct clk_ops sh7780_shyway_clk_ops = {
+ .recalc = shyway_clk_recalc,
+};
+
+static struct clk sh7780_shyway_clk = {
+ .name = "shyway_clk",
+ .flags = CLK_ALWAYS_ENABLED,
+ .ops = &sh7780_shyway_clk_ops,
+};
+
+/*
+ * Additional SH7780-specific on-chip clocks that aren't already part of the
+ * clock framework
+ */
+static struct clk *sh7780_onchip_clocks[] = {
+ &sh7780_shyway_clk,
+};
+
+static int __init sh7780_clk_init(void)
+{
+ struct clk *clk = clk_get("master_clk");
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(sh7780_onchip_clocks); i++) {
+ struct clk *clkp = sh7780_onchip_clocks[i];
+
+ clkp->parent = clk;
+ clk_register(clkp);
+ clk_enable(clkp);
+ }
+
+ /*
+ * Now that we have the rest of the clocks registered, we need to
+ * force the parent clock to propagate so that these clocks will
+ * automatically figure out their rate. We cheat by handing the
+ * parent clock its current rate and forcing child propagation.
+ */
+ clk_set_rate(clk, clk_get_rate(clk));
+
+ clk_put(clk);
+
+ return 0;
+}
+
+arch_initcall(sh7780_clk_init);
+
diff --git a/arch/sh/kernel/cpu/sh4/irq_intc2.c b/arch/sh/kernel/cpu/sh4/irq_intc2.c
deleted file mode 100644
index f6b16ba01932..000000000000
--- a/arch/sh/kernel/cpu/sh4/irq_intc2.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * linux/arch/sh/kernel/irq_intc2.c
- *
- * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Interrupt handling for INTC2-based IRQ.
- *
- * These are the "new Hitachi style" interrupts, as present on the
- * Hitachi 7751 and the STM ST40 STB1.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-
-
-struct intc2_data {
- unsigned char msk_offset;
- unsigned char msk_shift;
-#ifdef CONFIG_CPU_SUBTYPE_ST40
- int (*clear_irq) (int);
-#endif
-};
-
-
-static struct intc2_data intc2_data[NR_INTC2_IRQS];
-
-static void enable_intc2_irq(unsigned int irq);
-static void disable_intc2_irq(unsigned int irq);
-
-/* shutdown is same as "disable" */
-#define shutdown_intc2_irq disable_intc2_irq
-
-static void mask_and_ack_intc2(unsigned int);
-static void end_intc2_irq(unsigned int irq);
-
-static unsigned int startup_intc2_irq(unsigned int irq)
-{
- enable_intc2_irq(irq);
- return 0; /* never anything pending */
-}
-
-static struct hw_interrupt_type intc2_irq_type = {
- .typename = "INTC2-IRQ",
- .startup = startup_intc2_irq,
- .shutdown = shutdown_intc2_irq,
- .enable = enable_intc2_irq,
- .disable = disable_intc2_irq,
- .ack = mask_and_ack_intc2,
- .end = end_intc2_irq
-};
-
-static void disable_intc2_irq(unsigned int irq)
-{
- int irq_offset = irq - INTC2_FIRST_IRQ;
- int msk_shift, msk_offset;
-
- // Sanity check
- if((irq_offset<0) || (irq_offset>=NR_INTC2_IRQS))
- return;
-
- msk_shift = intc2_data[irq_offset].msk_shift;
- msk_offset = intc2_data[irq_offset].msk_offset;
-
- ctrl_outl(1<<msk_shift,
- INTC2_BASE+INTC2_INTMSK_OFFSET+msk_offset);
-}
-
-static void enable_intc2_irq(unsigned int irq)
-{
- int irq_offset = irq - INTC2_FIRST_IRQ;
- int msk_shift, msk_offset;
-
- /* Sanity check */
- if((irq_offset<0) || (irq_offset>=NR_INTC2_IRQS))
- return;
-
- msk_shift = intc2_data[irq_offset].msk_shift;
- msk_offset = intc2_data[irq_offset].msk_offset;
-
- ctrl_outl(1<<msk_shift,
- INTC2_BASE+INTC2_INTMSKCLR_OFFSET+msk_offset);
-}
-
-static void mask_and_ack_intc2(unsigned int irq)
-{
- disable_intc2_irq(irq);
-}
-
-static void end_intc2_irq(unsigned int irq)
-{
- if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
- enable_intc2_irq(irq);
-
-#ifdef CONFIG_CPU_SUBTYPE_ST40
- if (intc2_data[irq - INTC2_FIRST_IRQ].clear_irq)
- intc2_data[irq - INTC2_FIRST_IRQ].clear_irq (irq);
-#endif
-}
-
-/*
- * Setup an INTC2 style interrupt.
- * NOTE: Unlike IPR interrupts, parameters are not shifted by this code,
- * allowing the use of the numbers straight out of the datasheet.
- * For example:
- * PIO1 which is INTPRI00[19,16] and INTMSK00[13]
- * would be: ^ ^ ^ ^
- * | | | |
- * make_intc2_irq(84, 0, 16, 0, 13);
- */
-void make_intc2_irq(unsigned int irq,
- unsigned int ipr_offset, unsigned int ipr_shift,
- unsigned int msk_offset, unsigned int msk_shift,
- unsigned int priority)
-{
- int irq_offset = irq - INTC2_FIRST_IRQ;
- unsigned int flags;
- unsigned long ipr;
-
- if((irq_offset<0) || (irq_offset>=NR_INTC2_IRQS))
- return;
-
- disable_irq_nosync(irq);
-
- /* Fill the data we need */
- intc2_data[irq_offset].msk_offset = msk_offset;
- intc2_data[irq_offset].msk_shift = msk_shift;
-#ifdef CONFIG_CPU_SUBTYPE_ST40
- intc2_data[irq_offset].clear_irq = NULL;
-#endif
-
- /* Set the priority level */
- local_irq_save(flags);
-
- ipr=ctrl_inl(INTC2_BASE+INTC2_INTPRI_OFFSET+ipr_offset);
- ipr&=~(0xf<<ipr_shift);
- ipr|=(priority)<<ipr_shift;
- ctrl_outl(ipr, INTC2_BASE+INTC2_INTPRI_OFFSET+ipr_offset);
-
- local_irq_restore(flags);
-
- irq_desc[irq].handler=&intc2_irq_type;
-
- disable_intc2_irq(irq);
-}
-
-#ifdef CONFIG_CPU_SUBTYPE_ST40
-
-struct intc2_init {
- unsigned short irq;
- unsigned char ipr_offset, ipr_shift;
- unsigned char msk_offset, msk_shift;
-};
-
-static struct intc2_init intc2_init_data[] __initdata = {
- {64, 0, 0, 0, 0}, /* PCI serr */
- {65, 0, 4, 0, 1}, /* PCI err */
- {66, 0, 4, 0, 2}, /* PCI ad */
- {67, 0, 4, 0, 3}, /* PCI pwd down */
- {72, 0, 8, 0, 5}, /* DMAC INT0 */
- {73, 0, 8, 0, 6}, /* DMAC INT1 */
- {74, 0, 8, 0, 7}, /* DMAC INT2 */
- {75, 0, 8, 0, 8}, /* DMAC INT3 */
- {76, 0, 8, 0, 9}, /* DMAC INT4 */
- {78, 0, 8, 0, 11}, /* DMAC ERR */
- {80, 0, 12, 0, 12}, /* PIO0 */
- {84, 0, 16, 0, 13}, /* PIO1 */
- {88, 0, 20, 0, 14}, /* PIO2 */
- {112, 4, 0, 4, 0}, /* Mailbox */
-#ifdef CONFIG_CPU_SUBTYPE_ST40GX1
- {116, 4, 4, 4, 4}, /* SSC0 */
- {120, 4, 8, 4, 8}, /* IR Blaster */
- {124, 4, 12, 4, 12}, /* USB host */
- {128, 4, 16, 4, 16}, /* Video processor BLITTER */
- {132, 4, 20, 4, 20}, /* UART0 */
- {134, 4, 20, 4, 22}, /* UART2 */
- {136, 4, 24, 4, 24}, /* IO_PIO0 */
- {140, 4, 28, 4, 28}, /* EMPI */
- {144, 8, 0, 8, 0}, /* MAFE */
- {148, 8, 4, 8, 4}, /* PWM */
- {152, 8, 8, 8, 8}, /* SSC1 */
- {156, 8, 12, 8, 12}, /* IO_PIO1 */
- {160, 8, 16, 8, 16}, /* USB target */
- {164, 8, 20, 8, 20}, /* UART1 */
- {168, 8, 24, 8, 24}, /* Teletext */
- {172, 8, 28, 8, 28}, /* VideoSync VTG */
- {173, 8, 28, 8, 29}, /* VideoSync DVP0 */
- {174, 8, 28, 8, 30}, /* VideoSync DVP1 */
-#endif
-};
-
-void __init init_IRQ_intc2(void)
-{
- struct intc2_init *p;
-
- printk(KERN_ALERT "init_IRQ_intc2\n");
-
- for (p = intc2_init_data;
- p<intc2_init_data+ARRAY_SIZE(intc2_init_data);
- p++) {
- make_intc2_irq(p->irq, p->ipr_offset, p->ipr_shift,
- p-> msk_offset, p->msk_shift, 13);
- }
-}
-
-/* Adds a termination callback to the interrupt */
-void intc2_add_clear_irq(int irq, int (*fn)(int))
-{
- if (irq < INTC2_FIRST_IRQ)
- return;
-
- intc2_data[irq - INTC2_FIRST_IRQ].clear_irq = fn;
-}
-
-#endif /* CONFIG_CPU_SUBTYPE_ST40 */
diff --git a/arch/sh/kernel/io.c b/arch/sh/kernel/io.c
index d9932f25993b..71c9fde2fd90 100644
--- a/arch/sh/kernel/io.c
+++ b/arch/sh/kernel/io.c
@@ -2,58 +2,73 @@
* linux/arch/sh/kernel/io.c
*
* Copyright (C) 2000 Stuart Menefy
+ * Copyright (C) 2005 Paul Mundt
*
* Provide real functions which expand to whatever the header file defined.
* Also definitions of machine independent IO functions.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
*/
-
-#include <asm/io.h>
#include <linux/module.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
/*
* Copy data from IO memory space to "real" memory space.
* This needs to be optimized.
*/
-void memcpy_fromio(void * to, unsigned long from, unsigned long count)
+void memcpy_fromio(void *to, volatile void __iomem *from, unsigned long count)
{
char *p = to;
while (count) {
count--;
- *p = readb(from);
+ *p = readb((void __iomem *)from);
p++;
from++;
}
}
-
+EXPORT_SYMBOL(memcpy_fromio);
+
/*
* Copy data from "real" memory space to IO memory space.
* This needs to be optimized.
*/
-void memcpy_toio(unsigned long to, const void * from, unsigned long count)
+void memcpy_toio(volatile void __iomem *to, const void *from, unsigned long count)
{
const char *p = from;
while (count) {
count--;
- writeb(*p, to);
+ writeb(*p, (void __iomem *)to);
p++;
to++;
}
}
-
+EXPORT_SYMBOL(memcpy_toio);
+
/*
* "memset" on IO memory space.
* This needs to be optimized.
*/
-void memset_io(unsigned long dst, int c, unsigned long count)
+void memset_io(volatile void __iomem *dst, int c, unsigned long count)
{
while (count) {
count--;
- writeb(c, dst);
+ writeb(c, (void __iomem *)dst);
dst++;
}
}
-
-EXPORT_SYMBOL(memcpy_fromio);
-EXPORT_SYMBOL(memcpy_toio);
EXPORT_SYMBOL(memset_io);
+void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+ return sh_mv.mv_ioport_map(port, nr);
+}
+EXPORT_SYMBOL(ioport_map);
+
+void ioport_unmap(void __iomem *addr)
+{
+ sh_mv.mv_ioport_unmap(addr);
+}
+EXPORT_SYMBOL(ioport_unmap);
diff --git a/arch/sh/kernel/io_generic.c b/arch/sh/kernel/io_generic.c
index a911b0149d1f..28ec7487de8c 100644
--- a/arch/sh/kernel/io_generic.c
+++ b/arch/sh/kernel/io_generic.c
@@ -3,6 +3,7 @@
* linux/arch/sh/kernel/io_generic.c
*
* Copyright (C) 2000 Niibe Yutaka
+ * Copyright (C) 2005 Paul Mundt
*
* Generic I/O routine. These can be used where a machine specific version
* is not required.
@@ -10,21 +11,20 @@
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
- *
*/
-
+#include <linux/module.h>
#include <asm/io.h>
#include <asm/machvec.h>
-#include <linux/module.h>
-#if defined(CONFIG_CPU_SH3)
+#ifdef CONFIG_CPU_SH3
+/* SH3 has a PCMCIA bug that needs a dummy read from area 6 for a
+ * workaround. */
/* I'm not sure SH7709 has this kind of bug */
-#define SH3_PCMCIA_BUG_WORKAROUND 1
-#define DUMMY_READ_AREA6 0xba000000
+#define dummy_read() ctrl_inb(0xba000000)
+#else
+#define dummy_read()
#endif
-#define PORT2ADDR(x) (sh_mv.mv_isa_port2addr(x))
-
unsigned long generic_io_base;
static inline void delay(void)
@@ -32,40 +32,40 @@ static inline void delay(void)
ctrl_inw(0xa0000000);
}
-unsigned char generic_inb(unsigned long port)
+u8 generic_inb(unsigned long port)
{
- return *(volatile unsigned char*)PORT2ADDR(port);
+ return ctrl_inb((unsigned long __force)ioport_map(port, 1));
}
-unsigned short generic_inw(unsigned long port)
+u16 generic_inw(unsigned long port)
{
- return *(volatile unsigned short*)PORT2ADDR(port);
+ return ctrl_inw((unsigned long __force)ioport_map(port, 2));
}
-unsigned int generic_inl(unsigned long port)
+u32 generic_inl(unsigned long port)
{
- return *(volatile unsigned long*)PORT2ADDR(port);
+ return ctrl_inl((unsigned long __force)ioport_map(port, 4));
}
-unsigned char generic_inb_p(unsigned long port)
+u8 generic_inb_p(unsigned long port)
{
- unsigned long v = *(volatile unsigned char*)PORT2ADDR(port);
+ unsigned long v = generic_inb(port);
delay();
return v;
}
-unsigned short generic_inw_p(unsigned long port)
+u16 generic_inw_p(unsigned long port)
{
- unsigned long v = *(volatile unsigned short*)PORT2ADDR(port);
+ unsigned long v = generic_inw(port);
delay();
return v;
}
-unsigned int generic_inl_p(unsigned long port)
+u32 generic_inl_p(unsigned long port)
{
- unsigned long v = *(volatile unsigned long*)PORT2ADDR(port);
+ unsigned long v = generic_inl(port);
delay();
return v;
@@ -77,75 +77,70 @@ unsigned int generic_inl_p(unsigned long port)
* convert the port address to real address once.
*/
-void generic_insb(unsigned long port, void *buffer, unsigned long count)
+void generic_insb(unsigned long port, void *dst, unsigned long count)
{
- volatile unsigned char *port_addr;
- unsigned char *buf=buffer;
-
- port_addr = (volatile unsigned char *)PORT2ADDR(port);
+ volatile u8 *port_addr;
+ u8 *buf = dst;
- while(count--)
- *buf++ = *port_addr;
+ port_addr = (volatile u8 *)ioport_map(port, 1);
+ while (count--)
+ *buf++ = *port_addr;
}
-void generic_insw(unsigned long port, void *buffer, unsigned long count)
+void generic_insw(unsigned long port, void *dst, unsigned long count)
{
- volatile unsigned short *port_addr;
- unsigned short *buf=buffer;
+ volatile u16 *port_addr;
+ u16 *buf = dst;
- port_addr = (volatile unsigned short *)PORT2ADDR(port);
+ port_addr = (volatile u16 *)ioport_map(port, 2);
+ while (count--)
+ *buf++ = *port_addr;
- while(count--)
- *buf++ = *port_addr;
-#ifdef SH3_PCMCIA_BUG_WORKAROUND
- ctrl_inb (DUMMY_READ_AREA6);
-#endif
+ dummy_read();
}
-void generic_insl(unsigned long port, void *buffer, unsigned long count)
+void generic_insl(unsigned long port, void *dst, unsigned long count)
{
- volatile unsigned long *port_addr;
- unsigned long *buf=buffer;
+ volatile u32 *port_addr;
+ u32 *buf = dst;
- port_addr = (volatile unsigned long *)PORT2ADDR(port);
+ port_addr = (volatile u32 *)ioport_map(port, 4);
+ while (count--)
+ *buf++ = *port_addr;
- while(count--)
- *buf++ = *port_addr;
-#ifdef SH3_PCMCIA_BUG_WORKAROUND
- ctrl_inb (DUMMY_READ_AREA6);
-#endif
+ dummy_read();
}
-void generic_outb(unsigned char b, unsigned long port)
+void generic_outb(u8 b, unsigned long port)
{
- *(volatile unsigned char*)PORT2ADDR(port) = b;
+ ctrl_outb(b, (unsigned long __force)ioport_map(port, 1));
}
-void generic_outw(unsigned short b, unsigned long port)
+void generic_outw(u16 b, unsigned long port)
{
- *(volatile unsigned short*)PORT2ADDR(port) = b;
+ ctrl_outw(b, (unsigned long __force)ioport_map(port, 2));
}
-void generic_outl(unsigned int b, unsigned long port)
+void generic_outl(u32 b, unsigned long port)
{
- *(volatile unsigned long*)PORT2ADDR(port) = b;
+ ctrl_outl(b, (unsigned long __force)ioport_map(port, 4));
}
-void generic_outb_p(unsigned char b, unsigned long port)
+void generic_outb_p(u8 b, unsigned long port)
{
- *(volatile unsigned char*)PORT2ADDR(port) = b;
+ generic_outb(b, port);
delay();
}
-void generic_outw_p(unsigned short b, unsigned long port)
+void generic_outw_p(u16 b, unsigned long port)
{
- *(volatile unsigned short*)PORT2ADDR(port) = b;
+ generic_outw(b, port);
delay();
}
-void generic_outl_p(unsigned int b, unsigned long port)
+void generic_outl_p(u32 b, unsigned long port)
{
- *(volatile unsigned long*)PORT2ADDR(port) = b;
+ generic_outl(b, port);
delay();
}
@@ -154,90 +149,77 @@ void generic_outl_p(unsigned int b, unsigned long port)
* address. However as the port address doesn't change we only need to
* convert the port address to real address once.
*/
-
-void generic_outsb(unsigned long port, const void *buffer, unsigned long count)
+void generic_outsb(unsigned long port, const void *src, unsigned long count)
{
- volatile unsigned char *port_addr;
- const unsigned char *buf=buffer;
+ volatile u8 *port_addr;
+ const u8 *buf = src;
- port_addr = (volatile unsigned char *)PORT2ADDR(port);
+ port_addr = (volatile u8 __force *)ioport_map(port, 1);
- while(count--)
- *port_addr = *buf++;
+ while (count--)
+ *port_addr = *buf++;
}
-void generic_outsw(unsigned long port, const void *buffer, unsigned long count)
+void generic_outsw(unsigned long port, const void *src, unsigned long count)
{
- volatile unsigned short *port_addr;
- const unsigned short *buf=buffer;
+ volatile u16 *port_addr;
+ const u16 *buf = src;
- port_addr = (volatile unsigned short *)PORT2ADDR(port);
+ port_addr = (volatile u16 __force *)ioport_map(port, 2);
- while(count--)
- *port_addr = *buf++;
+ while (count--)
+ *port_addr = *buf++;
-#ifdef SH3_PCMCIA_BUG_WORKAROUND
- ctrl_inb (DUMMY_READ_AREA6);
-#endif
+ dummy_read();
}
-void generic_outsl(unsigned long port, const void *buffer, unsigned long count)
+void generic_outsl(unsigned long port, const void *src, unsigned long count)
{
- volatile unsigned long *port_addr;
- const unsigned long *buf=buffer;
+ volatile u32 *port_addr;
+ const u32 *buf = src;
- port_addr = (volatile unsigned long *)PORT2ADDR(port);
+ port_addr = (volatile u32 __force *)ioport_map(port, 4);
+ while (count--)
+ *port_addr = *buf++;
- while(count--)
- *port_addr = *buf++;
-
-#ifdef SH3_PCMCIA_BUG_WORKAROUND
- ctrl_inb (DUMMY_READ_AREA6);
-#endif
-}
-
-unsigned char generic_readb(unsigned long addr)
-{
- return *(volatile unsigned char*)addr;
+ dummy_read();
}
-unsigned short generic_readw(unsigned long addr)
+u8 generic_readb(void __iomem *addr)
{
- return *(volatile unsigned short*)addr;
+ return ctrl_inb((unsigned long __force)addr);
}
-unsigned int generic_readl(unsigned long addr)
+u16 generic_readw(void __iomem *addr)
{
- return *(volatile unsigned long*)addr;
+ return ctrl_inw((unsigned long __force)addr);
}
-void generic_writeb(unsigned char b, unsigned long addr)
+u32 generic_readl(void __iomem *addr)
{
- *(volatile unsigned char*)addr = b;
+ return ctrl_inl((unsigned long __force)addr);
}
-void generic_writew(unsigned short b, unsigned long addr)
+void generic_writeb(u8 b, void __iomem *addr)
{
- *(volatile unsigned short*)addr = b;
+ ctrl_outb(b, (unsigned long __force)addr);
}
-void generic_writel(unsigned int b, unsigned long addr)
+void generic_writew(u16 b, void __iomem *addr)
{
- *(volatile unsigned long*)addr = b;
+ ctrl_outw(b, (unsigned long __force)addr);
}
-void * generic_ioremap(unsigned long offset, unsigned long size)
+void generic_writel(u32 b, void __iomem *addr)
{
- return (void *) P2SEGADDR(offset);
+ ctrl_outl(b, (unsigned long __force)addr);
}
-EXPORT_SYMBOL(generic_ioremap);
-void generic_iounmap(void *addr)
+void __iomem *generic_ioport_map(unsigned long addr, unsigned int size)
{
+ return (void __iomem *)(addr + generic_io_base);
}
-EXPORT_SYMBOL(generic_iounmap);
-unsigned long generic_isa_port2addr(unsigned long offset)
+void generic_ioport_unmap(void __iomem *addr)
{
- return offset + generic_io_base;
}
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 54c171225b78..6883c00728cb 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -8,38 +8,13 @@
* SuperH version: Copyright (C) 1999 Niibe Yutaka
*/
-/*
- * IRQs are in fact implemented a bit like signal handlers for the kernel.
- * Naturally it's not a 1:1 relation, but there are similarities.
- */
-
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/kernel_stat.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
+#include <linux/irq.h>
#include <linux/interrupt.h>
-#include <linux/timex.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/init.h>
+#include <linux/kernel_stat.h>
#include <linux/seq_file.h>
-#include <linux/kallsyms.h>
-#include <linux/bitops.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/pgalloc.h>
-#include <asm/delay.h>
#include <asm/irq.h>
-#include <linux/irq.h>
-
+#include <asm/processor.h>
+#include <asm/cpu/mmu_context.h>
/*
* 'what should we do if we get a hw irq event on an illegal vector'.
@@ -66,7 +41,7 @@ int show_interrupts(struct seq_file *p, void *v)
seq_putc(p, '\n');
}
- if (i < ACTUAL_NR_IRQS) {
+ if (i < NR_IRQS) {
spin_lock_irqsave(&irq_desc[i].lock, flags);
action = irq_desc[i].action;
if (!action)
@@ -86,19 +61,32 @@ unlock:
}
#endif
+
asmlinkage int do_IRQ(unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7,
struct pt_regs regs)
-{
- int irq;
+{
+ int irq = r4;
irq_enter();
- asm volatile("stc r2_bank, %0\n\t"
- "shlr2 %0\n\t"
- "shlr2 %0\n\t"
- "shlr %0\n\t"
- "add #-16, %0\n\t"
- :"=z" (irq));
+
+#ifdef CONFIG_CPU_HAS_INTEVT
+ __asm__ __volatile__ (
+#ifdef CONFIG_CPU_HAS_SR_RB
+ "stc r2_bank, %0\n\t"
+#else
+ "mov.l @%1, %0\n\t"
+#endif
+ "shlr2 %0\n\t"
+ "shlr2 %0\n\t"
+ "shlr %0\n\t"
+ "add #-16, %0\n\t"
+ : "=z" (irq), "=r" (r4)
+ : "1" (INTEVT)
+ : "memory"
+ );
+#endif
+
irq = irq_demux(irq);
__do_IRQ(irq, &regs);
irq_exit();
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
new file mode 100644
index 000000000000..43546525f28f
--- /dev/null
+++ b/arch/sh/kernel/machine_kexec.c
@@ -0,0 +1,112 @@
+/*
+ * machine_kexec.c - handle transition of Linux booting another kernel
+ * Copyright (C) 2002-2003 Eric Biederman <ebiederm@xmission.com>
+ *
+ * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz
+ * LANDISK/sh4 supported by kogiidena
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/kexec.h>
+#include <linux/delay.h>
+#include <linux/reboot.h>
+#include <asm/pgtable.h>
+#include <asm/pgalloc.h>
+#include <asm/mmu_context.h>
+#include <asm/io.h>
+#include <asm/cacheflush.h>
+
+typedef NORET_TYPE void (*relocate_new_kernel_t)(
+ unsigned long indirection_page,
+ unsigned long reboot_code_buffer,
+ unsigned long start_address,
+ unsigned long vbr_reg) ATTRIB_NORET;
+
+const extern unsigned char relocate_new_kernel[];
+const extern unsigned int relocate_new_kernel_size;
+extern void *gdb_vbr_vector;
+
+/*
+ * Provide a dummy crash_notes definition while crash dump arrives to ppc.
+ * This prevents breakage of crash_notes attribute in kernel/ksysfs.c.
+ */
+void *crash_notes = NULL;
+
+void machine_shutdown(void)
+{
+}
+
+void machine_crash_shutdown(struct pt_regs *regs)
+{
+}
+
+/*
+ * Do what every setup is needed on image and the
+ * reboot code buffer to allow us to avoid allocations
+ * later.
+ */
+int machine_kexec_prepare(struct kimage *image)
+{
+ return 0;
+}
+
+void machine_kexec_cleanup(struct kimage *image)
+{
+}
+
+static void kexec_info(struct kimage *image)
+{
+ int i;
+ printk("kexec information\n");
+ for (i = 0; i < image->nr_segments; i++) {
+ printk(" segment[%d]: 0x%08x - 0x%08x (0x%08x)\n",
+ i,
+ (unsigned int)image->segment[i].mem,
+ (unsigned int)image->segment[i].mem + image->segment[i].memsz,
+ (unsigned int)image->segment[i].memsz);
+ }
+ printk(" start : 0x%08x\n\n", (unsigned int)image->start);
+}
+
+
+/*
+ * Do not allocate memory (or fail in any way) in machine_kexec().
+ * We are past the point of no return, committed to rebooting now.
+ */
+NORET_TYPE void machine_kexec(struct kimage *image)
+{
+
+ unsigned long page_list;
+ unsigned long reboot_code_buffer;
+ unsigned long vbr_reg;
+ relocate_new_kernel_t rnk;
+
+#if defined(CONFIG_SH_STANDARD_BIOS)
+ vbr_reg = ((unsigned long )gdb_vbr_vector) - 0x100;
+#else
+ vbr_reg = 0x80000000; // dummy
+#endif
+ /* Interrupts aren't acceptable while we reboot */
+ local_irq_disable();
+
+ page_list = image->head;
+
+ /* we need both effective and real address here */
+ reboot_code_buffer =
+ (unsigned long)page_address(image->control_code_page);
+
+ /* copy our kernel relocation code to the control code page */
+ memcpy((void *)reboot_code_buffer, relocate_new_kernel,
+ relocate_new_kernel_size);
+
+ kexec_info(image);
+ flush_cache_all();
+
+ /* now call it */
+ rnk = (relocate_new_kernel_t) reboot_code_buffer;
+ (*rnk)(page_list, reboot_code_buffer, image->start, vbr_reg);
+}
+
diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c
index aac15e42d03b..a4dc2b532e10 100644
--- a/arch/sh/kernel/process.c
+++ b/arch/sh/kernel/process.c
@@ -71,6 +71,16 @@ void cpu_idle(void)
void machine_restart(char * __unused)
{
+
+#ifdef CONFIG_KEXEC
+ struct kimage *image;
+ image = xchg(&kexec_image, 0);
+ if (image) {
+ machine_shutdown();
+ machine_kexec(image);
+ }
+#endif
+
/* SR.BL=1 and invoke address error to let CPU reset (manual reset) */
asm volatile("ldc %0, sr\n\t"
"mov.l @%1, %0" : : "r" (0x10000000), "r" (0x80000001));
diff --git a/arch/sh/kernel/relocate_kernel.S b/arch/sh/kernel/relocate_kernel.S
new file mode 100644
index 000000000000..b0695cffec6e
--- /dev/null
+++ b/arch/sh/kernel/relocate_kernel.S
@@ -0,0 +1,102 @@
+/*
+ * relocate_kernel.S - put the kernel image in place to boot
+ * 2005.9.17 kogiidena@eggplant.ddo.jp
+ *
+ * LANDISK/sh4 is supported. Maybe, SH archtecture works well.
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+
+#define PAGE_SIZE 4096 /* must be same value as in <asm/page.h> */
+
+
+ .globl relocate_new_kernel
+relocate_new_kernel:
+ /* r4 = indirection_page */
+ /* r5 = reboot_code_buffer */
+ /* r6 = start_address */
+ /* r7 = vbr_reg */
+
+ mov.l 10f,r8 /* 4096 */
+ mov.l 11f,r9 /* 0xa0000000 */
+
+ /* stack setting */
+ add r8,r5
+ mov r5,r15
+
+ bra 1f
+ mov r4,r0 /* cmd = indirection_page */
+0:
+ mov.l @r4+,r0 /* cmd = *ind++ */
+
+1: /* addr = (cmd | 0xa0000000) & 0xfffffff0 */
+ mov r0,r2
+ or r9,r2
+ mov #-16,r1
+ and r1,r2
+
+ /* if(cmd & IND_DESTINATION) dst = addr */
+ tst #1,r0
+ bt 2f
+ bra 0b
+ mov r2,r5
+
+2: /* else if(cmd & IND_INDIRECTION) ind = addr */
+ tst #2,r0
+ bt 3f
+ bra 0b
+ mov r2,r4
+
+3: /* else if(cmd & IND_DONE) goto 6 */
+ tst #4,r0
+ bt 4f
+ bra 6f
+ nop
+
+4: /* else if(cmd & IND_SOURCE) memcpy(dst,addr,PAGE_SIZE) */
+ tst #8,r0
+ bt 0b
+
+ mov r8,r3
+ shlr2 r3
+ shlr2 r3
+5:
+ dt r3
+ mov.l @r2+,r1 /* 16n+0 */
+ mov.l r1,@r5
+ add #4,r5
+ mov.l @r2+,r1 /* 16n+4 */
+ mov.l r1,@r5
+ add #4,r5
+ mov.l @r2+,r1 /* 16n+8 */
+ mov.l r1,@r5
+ add #4,r5
+ mov.l @r2+,r1 /* 16n+12 */
+ mov.l r1,@r5
+ add #4,r5
+ bf 5b
+
+ bra 0b
+ nop
+6:
+#ifdef CONFIG_SH_STANDARD_BIOS
+ ldc r7, vbr
+#endif
+ jmp @r6
+ nop
+
+ .align 2
+10:
+ .long PAGE_SIZE
+11:
+ .long 0xa0000000
+
+relocate_new_kernel_end:
+
+ .globl relocate_new_kernel_size
+relocate_new_kernel_size:
+ .long relocate_new_kernel_end - relocate_new_kernel
diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c
index 671b876416bf..314a275c04e0 100644
--- a/arch/sh/kernel/time.c
+++ b/arch/sh/kernel/time.c
@@ -3,7 +3,7 @@
*
* Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
* Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- * Copyright (C) 2002, 2003, 2004 Paul Mundt
+ * Copyright (C) 2002, 2003, 2004, 2005 Paul Mundt
* Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
*
* Some code taken from i386 version.
@@ -11,50 +11,21 @@
*/
#include <linux/config.h>
-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/sched.h>
#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/delay.h>
+#include <linux/module.h>
#include <linux/init.h>
-#include <linux/smp.h>
#include <linux/profile.h>
-
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/delay.h>
-#include <asm/machvec.h>
+#include <asm/clock.h>
#include <asm/rtc.h>
-#include <asm/freq.h>
-#include <asm/cpu/timer.h>
-#ifdef CONFIG_SH_KGDB
+#include <asm/timer.h>
#include <asm/kgdb.h>
-#endif
-
-#include <linux/timex.h>
-#include <linux/irq.h>
-
-#define TMU_TOCR_INIT 0x00
-#define TMU0_TCR_INIT 0x0020
-#define TMU_TSTR_INIT 1
-
-#define TMU0_TCR_CALIB 0x0000
-
-#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
-#define CLOCKGEN_MEMCLKCR 0xbb040038
-#define MEMCLKCR_RATIO_MASK 0x7
-#endif /* CONFIG_CPU_SUBTYPE_ST40STB1 */
extern unsigned long wall_jiffies;
-#define TICK_SIZE (tick_nsec / 1000)
-DEFINE_SPINLOCK(tmu0_lock);
+struct sys_timer *sys_timer;
+
+/* Move this somewhere more sensible.. */
+DEFINE_SPINLOCK(rtc_lock);
+EXPORT_SYMBOL(rtc_lock);
/* XXX: Can we initialize this in a routine somewhere? Dreamcast doesn't want
* these routines anywhere... */
@@ -66,98 +37,14 @@ void (*rtc_get_time)(struct timespec *);
int (*rtc_set_time)(const time_t);
#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7300)
-static int md_table[] = { 1, 2, 3, 4, 6, 8, 12 };
-#endif
-#if defined(CONFIG_CPU_SH3)
-static int stc_multipliers[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
-static int stc_values[] = { 0, 1, 4, 2, 5, 0, 0, 0 };
-#define bfc_divisors stc_multipliers
-#define bfc_values stc_values
-static int ifc_divisors[] = { 1, 2, 3, 4, 1, 1, 1, 1 };
-static int ifc_values[] = { 0, 1, 4, 2, 0, 0, 0, 0 };
-static int pfc_divisors[] = { 1, 2, 3, 4, 6, 1, 1, 1 };
-static int pfc_values[] = { 0, 1, 4, 2, 5, 0, 0, 0 };
-#elif defined(CONFIG_CPU_SH4)
-#if defined(CONFIG_CPU_SUBTYPE_SH73180)
-static int ifc_divisors[] = { 1, 2, 3, 4, 6, 8, 12, 16 };
-static int ifc_values[] = { 0, 1, 2, 3, 4, 5, 6, 7 };
-#define bfc_divisors ifc_divisors /* Same */
-#define bfc_values ifc_values
-#define pfc_divisors ifc_divisors /* Same */
-#define pfc_values ifc_values
-#else
-static int ifc_divisors[] = { 1, 2, 3, 4, 6, 8, 1, 1 };
-static int ifc_values[] = { 0, 1, 2, 3, 0, 4, 0, 5 };
-#define bfc_divisors ifc_divisors /* Same */
-#define bfc_values ifc_values
-static int pfc_divisors[] = { 2, 3, 4, 6, 8, 2, 2, 2 };
-static int pfc_values[] = { 0, 0, 1, 2, 0, 3, 0, 4 };
-#endif
-#else
-#error "Unknown ifc/bfc/pfc/stc values for this processor"
-#endif
-
/*
* Scheduler clock - returns current time in nanosec units.
*/
-unsigned long long sched_clock(void)
+unsigned long long __attribute__ ((weak)) sched_clock(void)
{
return (unsigned long long)jiffies * (1000000000 / HZ);
}
-static unsigned long do_gettimeoffset(void)
-{
- int count;
- unsigned long flags;
-
- static int count_p = 0x7fffffff; /* for the first call after boot */
- static unsigned long jiffies_p = 0;
-
- /*
- * cache volatile jiffies temporarily; we have IRQs turned off.
- */
- unsigned long jiffies_t;
-
- spin_lock_irqsave(&tmu0_lock, flags);
- /* timer count may underflow right here */
- count = ctrl_inl(TMU0_TCNT); /* read the latched count */
-
- jiffies_t = jiffies;
-
- /*
- * avoiding timer inconsistencies (they are rare, but they happen)...
- * there is one kind of problem that must be avoided here:
- * 1. the timer counter underflows
- */
-
- if( jiffies_t == jiffies_p ) {
- if( count > count_p ) {
- /* the nutcase */
-
- if(ctrl_inw(TMU0_TCR) & 0x100) { /* Check UNF bit */
- /*
- * We cannot detect lost timer interrupts ...
- * well, that's why we call them lost, don't we? :)
- * [hmm, on the Pentium and Alpha we can ... sort of]
- */
- count -= LATCH;
- } else {
- printk("do_slow_gettimeoffset(): hardware timer problem?\n");
- }
- }
- } else
- jiffies_p = jiffies_t;
-
- count_p = count;
- spin_unlock_irqrestore(&tmu0_lock, flags);
-
- count = ((LATCH-1) - count) * TICK_SIZE;
- count = (count + LATCH/2) / LATCH;
-
- return count;
-}
-
void do_gettimeofday(struct timeval *tv)
{
unsigned long seq;
@@ -166,7 +53,7 @@ void do_gettimeofday(struct timeval *tv)
do {
seq = read_seqbegin(&xtime_lock);
- usec = do_gettimeoffset();
+ usec = get_timer_offset();
lost = jiffies - wall_jiffies;
if (lost)
@@ -202,7 +89,7 @@ int do_settimeofday(struct timespec *tv)
* wall time. Discover what correction gettimeofday() would have
* made, and then undo it!
*/
- nsec -= 1000 * (do_gettimeoffset() +
+ nsec -= 1000 * (get_timer_offset() +
(jiffies - wall_jiffies) * (1000000 / HZ));
wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
@@ -224,10 +111,10 @@ EXPORT_SYMBOL(do_settimeofday);
static long last_rtc_update;
/*
- * timer_interrupt() needs to keep up the real-time clock,
+ * handle_timer_tick() needs to keep up the real-time clock,
* as well as call the "do_timer()" routine every clocktick
*/
-static inline void do_timer_interrupt(int irq, struct pt_regs *regs)
+void handle_timer_tick(struct pt_regs *regs)
{
do_timer(regs);
#ifndef CONFIG_SMP
@@ -252,337 +139,35 @@ static inline void do_timer_interrupt(int irq, struct pt_regs *regs)
if (rtc_set_time(xtime.tv_sec) == 0)
last_rtc_update = xtime.tv_sec;
else
- last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
+ /* do it again in 60s */
+ last_rtc_update = xtime.tv_sec - 600;
}
}
-/*
- * This is the same as the above, except we _also_ save the current
- * Time Stamp Counter value at the time of the timer interrupt, so that
- * we later on can estimate the time of day more exactly.
- */
-static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
- unsigned long timer_status;
-
- /* Clear UNF bit */
- timer_status = ctrl_inw(TMU0_TCR);
- timer_status &= ~0x100;
- ctrl_outw(timer_status, TMU0_TCR);
-
- /*
- * Here we are in the timer irq handler. We just have irqs locally
- * disabled but we don't know if the timer_bh is running on the other
- * CPU. We need to avoid to SMP race with it. NOTE: we don' t need
- * the irq version of write_lock because as just said we have irq
- * locally disabled. -arca
- */
- write_seqlock(&xtime_lock);
- do_timer_interrupt(irq, regs);
- write_sequnlock(&xtime_lock);
-
- return IRQ_HANDLED;
-}
-
-/*
- * Hah! We'll see if this works (switching from usecs to nsecs).
- */
-static unsigned int __init get_timer_frequency(void)
-{
- u32 freq;
- struct timespec ts1, ts2;
- unsigned long diff_nsec;
- unsigned long factor;
-
- /* Setup the timer: We don't want to generate interrupts, just
- * have it count down at its natural rate.
- */
- ctrl_outb(0, TMU_TSTR);
-#if !defined(CONFIG_CPU_SUBTYPE_SH7300)
- ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
-#endif
- ctrl_outw(TMU0_TCR_CALIB, TMU0_TCR);
- ctrl_outl(0xffffffff, TMU0_TCOR);
- ctrl_outl(0xffffffff, TMU0_TCNT);
-
- rtc_get_time(&ts2);
-
- do {
- rtc_get_time(&ts1);
- } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec);
-
- /* actually start the timer */
- ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
-
- do {
- rtc_get_time(&ts2);
- } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec);
-
- freq = 0xffffffff - ctrl_inl(TMU0_TCNT);
- if (ts2.tv_nsec < ts1.tv_nsec) {
- ts2.tv_nsec += 1000000000;
- ts2.tv_sec--;
- }
-
- diff_nsec = (ts2.tv_sec - ts1.tv_sec) * 1000000000 + (ts2.tv_nsec - ts1.tv_nsec);
-
- /* this should work well if the RTC has a precision of n Hz, where
- * n is an integer. I don't think we have to worry about the other
- * cases. */
- factor = (1000000000 + diff_nsec/2) / diff_nsec;
-
- if (factor * diff_nsec > 1100000000 ||
- factor * diff_nsec < 900000000)
- panic("weird RTC (diff_nsec %ld)", diff_nsec);
-
- return freq * factor;
-}
-
-void (*board_time_init)(void);
-void (*board_timer_setup)(struct irqaction *irq);
-
-static unsigned int sh_pclk_freq __initdata = CONFIG_SH_PCLK_FREQ;
-
-static int __init sh_pclk_setup(char *str)
-{
- unsigned int freq;
-
- if (get_option(&str, &freq))
- sh_pclk_freq = freq;
-
- return 1;
-}
-__setup("sh_pclk=", sh_pclk_setup);
-
-static struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "timer", NULL, NULL};
-
-void get_current_frequency_divisors(unsigned int *ifc, unsigned int *bfc, unsigned int *pfc)
-{
- unsigned int frqcr = ctrl_inw(FRQCR);
-
-#if defined(CONFIG_CPU_SH3)
-#if defined(CONFIG_CPU_SUBTYPE_SH7300)
- *ifc = md_table[((frqcr & 0x0070) >> 4)];
- *bfc = md_table[((frqcr & 0x0700) >> 8)];
- *pfc = md_table[frqcr & 0x0007];
-#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
- *bfc = stc_multipliers[(frqcr & 0x0300) >> 8];
- *ifc = ifc_divisors[(frqcr & 0x0030) >> 4];
- *pfc = pfc_divisors[frqcr & 0x0003];
-#else
- unsigned int tmp;
-
- tmp = (frqcr & 0x8000) >> 13;
- tmp |= (frqcr & 0x0030) >> 4;
- *bfc = stc_multipliers[tmp];
- tmp = (frqcr & 0x4000) >> 12;
- tmp |= (frqcr & 0x000c) >> 2;
- *ifc = ifc_divisors[tmp];
- tmp = (frqcr & 0x2000) >> 11;
- tmp |= frqcr & 0x0003;
- *pfc = pfc_divisors[tmp];
-#endif
-#elif defined(CONFIG_CPU_SH4)
-#if defined(CONFIG_CPU_SUBTYPE_SH73180)
- *ifc = ifc_divisors[(frqcr>> 20) & 0x0007];
- *bfc = bfc_divisors[(frqcr>> 12) & 0x0007];
- *pfc = pfc_divisors[frqcr & 0x0007];
-#else
- *ifc = ifc_divisors[(frqcr >> 6) & 0x0007];
- *bfc = bfc_divisors[(frqcr >> 3) & 0x0007];
- *pfc = pfc_divisors[frqcr & 0x0007];
-#endif
-#endif
-}
-
-/*
- * This bit of ugliness builds up accessor routines to get at both
- * the divisors and the physical values.
- */
-#define _FREQ_TABLE(x) \
- unsigned int get_##x##_divisor(unsigned int value) \
- { return x##_divisors[value]; } \
- \
- unsigned int get_##x##_value(unsigned int divisor) \
- { return x##_values[(divisor - 1)]; }
-
-_FREQ_TABLE(ifc);
-_FREQ_TABLE(bfc);
-_FREQ_TABLE(pfc);
-
-#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
-
-/*
- * The ST40 divisors are totally different so we set the cpu data
- * clocks using a different algorithm
- *
- * I've just plugged this from the 2.4 code
- * - Alex Bennee <kernel-hacker@bennee.com>
- */
-#define CCN_PVR_CHIP_SHIFT 24
-#define CCN_PVR_CHIP_MASK 0xff
-#define CCN_PVR_CHIP_ST40STB1 0x4
-
-
-struct frqcr_data {
- unsigned short frqcr;
-
- struct {
- unsigned char multiplier;
- unsigned char divisor;
- } factor[3];
-};
-
-static struct frqcr_data st40_frqcr_table[] = {
- { 0x000, {{1,1}, {1,1}, {1,2}}},
- { 0x002, {{1,1}, {1,1}, {1,4}}},
- { 0x004, {{1,1}, {1,1}, {1,8}}},
- { 0x008, {{1,1}, {1,2}, {1,2}}},
- { 0x00A, {{1,1}, {1,2}, {1,4}}},
- { 0x00C, {{1,1}, {1,2}, {1,8}}},
- { 0x011, {{1,1}, {2,3}, {1,6}}},
- { 0x013, {{1,1}, {2,3}, {1,3}}},
- { 0x01A, {{1,1}, {1,2}, {1,4}}},
- { 0x01C, {{1,1}, {1,2}, {1,8}}},
- { 0x023, {{1,1}, {2,3}, {1,3}}},
- { 0x02C, {{1,1}, {1,2}, {1,8}}},
- { 0x048, {{1,2}, {1,2}, {1,4}}},
- { 0x04A, {{1,2}, {1,2}, {1,6}}},
- { 0x04C, {{1,2}, {1,2}, {1,8}}},
- { 0x05A, {{1,2}, {1,3}, {1,6}}},
- { 0x05C, {{1,2}, {1,3}, {1,6}}},
- { 0x063, {{1,2}, {1,4}, {1,4}}},
- { 0x06C, {{1,2}, {1,4}, {1,8}}},
- { 0x091, {{1,3}, {1,3}, {1,6}}},
- { 0x093, {{1,3}, {1,3}, {1,6}}},
- { 0x0A3, {{1,3}, {1,6}, {1,6}}},
- { 0x0DA, {{1,4}, {1,4}, {1,8}}},
- { 0x0DC, {{1,4}, {1,4}, {1,8}}},
- { 0x0EC, {{1,4}, {1,8}, {1,8}}},
- { 0x123, {{1,4}, {1,4}, {1,8}}},
- { 0x16C, {{1,4}, {1,8}, {1,8}}},
+static struct sysdev_class timer_sysclass = {
+ set_kset_name("timer"),
};
-struct memclk_data {
- unsigned char multiplier;
- unsigned char divisor;
-};
-
-static struct memclk_data st40_memclk_table[8] = {
- {1,1}, // 000
- {1,2}, // 001
- {1,3}, // 010
- {2,3}, // 011
- {1,4}, // 100
- {1,6}, // 101
- {1,8}, // 110
- {1,8} // 111
-};
-
-static void st40_specific_time_init(unsigned int module_clock, unsigned short frqcr)
+static int __init timer_init_sysfs(void)
{
- unsigned int cpu_clock, master_clock, bus_clock, memory_clock;
- struct frqcr_data *d;
- int a;
- unsigned long memclkcr;
- struct memclk_data *e;
+ int ret = sysdev_class_register(&timer_sysclass);
+ if (ret != 0)
+ return ret;
- for (a = 0; a < ARRAY_SIZE(st40_frqcr_table); a++) {
- d = &st40_frqcr_table[a];
-
- if (d->frqcr == (frqcr & 0x1ff))
- break;
- }
+ sys_timer->dev.cls = &timer_sysclass;
+ return sysdev_register(&sys_timer->dev);
+}
- if (a == ARRAY_SIZE(st40_frqcr_table)) {
- d = st40_frqcr_table;
+device_initcall(timer_init_sysfs);
- printk("ERROR: Unrecognised FRQCR value (0x%x), "
- "using default multipliers\n", frqcr);
- }
-
- memclkcr = ctrl_inl(CLOCKGEN_MEMCLKCR);
- e = &st40_memclk_table[memclkcr & MEMCLKCR_RATIO_MASK];
-
- printk(KERN_INFO "Clock multipliers: CPU: %d/%d Bus: %d/%d "
- "Mem: %d/%d Periph: %d/%d\n",
- d->factor[0].multiplier, d->factor[0].divisor,
- d->factor[1].multiplier, d->factor[1].divisor,
- e->multiplier, e->divisor,
- d->factor[2].multiplier, d->factor[2].divisor);
-
- master_clock = module_clock * d->factor[2].divisor
- / d->factor[2].multiplier;
- bus_clock = master_clock * d->factor[1].multiplier
- / d->factor[1].divisor;
- memory_clock = master_clock * e->multiplier
- / e->divisor;
- cpu_clock = master_clock * d->factor[0].multiplier
- / d->factor[0].divisor;
-
- current_cpu_data.cpu_clock = cpu_clock;
- current_cpu_data.master_clock = master_clock;
- current_cpu_data.bus_clock = bus_clock;
- current_cpu_data.memory_clock = memory_clock;
- current_cpu_data.module_clock = module_clock;
-}
-#endif
+void (*board_time_init)(void);
void __init time_init(void)
{
- unsigned int timer_freq = 0;
- unsigned int ifc, pfc, bfc;
- unsigned long interval;
-#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
- unsigned long pvr;
- unsigned short frqcr;
-#endif
-
if (board_time_init)
board_time_init();
- /*
- * If we don't have an RTC (such as with the SH7300), don't attempt to
- * probe the timer frequency. Rely on an either hardcoded peripheral
- * clock value, or on the sh_pclk command line option. Note that we
- * still need to have CONFIG_SH_PCLK_FREQ set in order for things like
- * CLOCK_TICK_RATE to be sane.
- */
- current_cpu_data.module_clock = sh_pclk_freq;
-
-#ifdef CONFIG_SH_PCLK_CALC
- /* XXX: Switch this over to a more generic test. */
- {
- unsigned int freq;
-
- /*
- * If we've specified a peripheral clock frequency, and we have
- * an RTC, compare it against the autodetected value. Complain
- * if there's a mismatch.
- */
- timer_freq = get_timer_frequency();
- freq = timer_freq * 4;
-
- if (sh_pclk_freq && (sh_pclk_freq/100*99 > freq || sh_pclk_freq/100*101 < freq)) {
- printk(KERN_NOTICE "Calculated peripheral clock value "
- "%d differs from sh_pclk value %d, fixing..\n",
- freq, sh_pclk_freq);
- current_cpu_data.module_clock = freq;
- }
- }
-#endif
-
-#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
- /* XXX: Update ST40 code to use board_time_init() */
- pvr = ctrl_inl(CCN_PVR);
- frqcr = ctrl_inw(FRQCR);
- printk("time.c ST40 Probe: PVR %08lx, FRQCR %04hx\n", pvr, frqcr);
-
- if (((pvr >> CCN_PVR_CHIP_SHIFT) & CCN_PVR_CHIP_MASK) == CCN_PVR_CHIP_ST40STB1)
- st40_specific_time_init(current_cpu_data.module_clock, frqcr);
- else
-#endif
- get_current_frequency_divisors(&ifc, &bfc, &pfc);
+ clk_init();
if (rtc_get_time) {
rtc_get_time(&xtime);
@@ -594,51 +179,12 @@ void __init time_init(void)
set_normalized_timespec(&wall_to_monotonic,
-xtime.tv_sec, -xtime.tv_nsec);
- if (board_timer_setup) {
- board_timer_setup(&irq0);
- } else {
- setup_irq(TIMER_IRQ, &irq0);
- }
-
/*
- * for ST40 chips the current_cpu_data should already be set
- * so not having valid pfc/bfc/ifc shouldn't be a problem
+ * Find the timer to use as the system timer, it will be
+ * initialized for us.
*/
- if (!current_cpu_data.master_clock)
- current_cpu_data.master_clock = current_cpu_data.module_clock * pfc;
- if (!current_cpu_data.bus_clock)
- current_cpu_data.bus_clock = current_cpu_data.master_clock / bfc;
- if (!current_cpu_data.cpu_clock)
- current_cpu_data.cpu_clock = current_cpu_data.master_clock / ifc;
-
- printk("CPU clock: %d.%02dMHz\n",
- (current_cpu_data.cpu_clock / 1000000),
- (current_cpu_data.cpu_clock % 1000000)/10000);
- printk("Bus clock: %d.%02dMHz\n",
- (current_cpu_data.bus_clock / 1000000),
- (current_cpu_data.bus_clock % 1000000)/10000);
-#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
- printk("Memory clock: %d.%02dMHz\n",
- (current_cpu_data.memory_clock / 1000000),
- (current_cpu_data.memory_clock % 1000000)/10000);
-#endif
- printk("Module clock: %d.%02dMHz\n",
- (current_cpu_data.module_clock / 1000000),
- (current_cpu_data.module_clock % 1000000)/10000);
-
- interval = (current_cpu_data.module_clock/4 + HZ/2) / HZ;
-
- printk("Interval = %ld\n", interval);
-
- /* Start TMU0 */
- ctrl_outb(0, TMU_TSTR);
-#if !defined(CONFIG_CPU_SUBTYPE_SH7300)
- ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
-#endif
- ctrl_outw(TMU0_TCR_INIT, TMU0_TCR);
- ctrl_outl(interval, TMU0_TCOR);
- ctrl_outl(interval, TMU0_TCNT);
- ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
+ sys_timer = get_sys_timer();
+ printk(KERN_INFO "Using %s for system timer\n", sys_timer->name);
#if defined(CONFIG_SH_KGDB)
/*
diff --git a/arch/sh/kernel/timers/Makefile b/arch/sh/kernel/timers/Makefile
new file mode 100644
index 000000000000..151a6a304cec
--- /dev/null
+++ b/arch/sh/kernel/timers/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the various Linux/SuperH timers
+#
+
+obj-y := timer.o
+
+obj-$(CONFIG_SH_TMU) += timer-tmu.o
+
diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c
new file mode 100644
index 000000000000..96a64cb13106
--- /dev/null
+++ b/arch/sh/kernel/timers/timer-tmu.c
@@ -0,0 +1,229 @@
+/*
+ * arch/sh/kernel/timers/timer-tmu.c - TMU Timer Support
+ *
+ * Copyright (C) 2005 Paul Mundt
+ *
+ * TMU handling code hacked out of arch/sh/kernel/time.c
+ *
+ * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
+ * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
+ * Copyright (C) 2002, 2003, 2004 Paul Mundt
+ * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/seqlock.h>
+#include <asm/timer.h>
+#include <asm/rtc.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/clock.h>
+
+#define TMU_TOCR_INIT 0x00
+#define TMU0_TCR_INIT 0x0020
+#define TMU_TSTR_INIT 1
+
+#define TMU0_TCR_CALIB 0x0000
+
+static DEFINE_SPINLOCK(tmu0_lock);
+
+static unsigned long tmu_timer_get_offset(void)
+{
+ int count;
+ unsigned long flags;
+
+ static int count_p = 0x7fffffff; /* for the first call after boot */
+ static unsigned long jiffies_p = 0;
+
+ /*
+ * cache volatile jiffies temporarily; we have IRQs turned off.
+ */
+ unsigned long jiffies_t;
+
+ spin_lock_irqsave(&tmu0_lock, flags);
+ /* timer count may underflow right here */
+ count = ctrl_inl(TMU0_TCNT); /* read the latched count */
+
+ jiffies_t = jiffies;
+
+ /*
+ * avoiding timer inconsistencies (they are rare, but they happen)...
+ * there is one kind of problem that must be avoided here:
+ * 1. the timer counter underflows
+ */
+
+ if (jiffies_t == jiffies_p) {
+ if (count > count_p) {
+ /* the nutcase */
+ if (ctrl_inw(TMU0_TCR) & 0x100) { /* Check UNF bit */
+ count -= LATCH;
+ } else {
+ printk("%s (): hardware timer problem?\n",
+ __FUNCTION__);
+ }
+ }
+ } else
+ jiffies_p = jiffies_t;
+
+ count_p = count;
+ spin_unlock_irqrestore(&tmu0_lock, flags);
+
+ count = ((LATCH-1) - count) * TICK_SIZE;
+ count = (count + LATCH/2) / LATCH;
+
+ return count;
+}
+
+static irqreturn_t tmu_timer_interrupt(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ unsigned long timer_status;
+
+ /* Clear UNF bit */
+ timer_status = ctrl_inw(TMU0_TCR);
+ timer_status &= ~0x100;
+ ctrl_outw(timer_status, TMU0_TCR);
+
+ /*
+ * Here we are in the timer irq handler. We just have irqs locally
+ * disabled but we don't know if the timer_bh is running on the other
+ * CPU. We need to avoid to SMP race with it. NOTE: we don' t need
+ * the irq version of write_lock because as just said we have irq
+ * locally disabled. -arca
+ */
+ write_seqlock(&xtime_lock);
+ handle_timer_tick(regs);
+ write_sequnlock(&xtime_lock);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction tmu_irq = {
+ .name = "timer",
+ .handler = tmu_timer_interrupt,
+ .flags = SA_INTERRUPT,
+ .mask = CPU_MASK_NONE,
+};
+
+/*
+ * Hah! We'll see if this works (switching from usecs to nsecs).
+ */
+static unsigned long tmu_timer_get_frequency(void)
+{
+ u32 freq;
+ struct timespec ts1, ts2;
+ unsigned long diff_nsec;
+ unsigned long factor;
+
+ /* Setup the timer: We don't want to generate interrupts, just
+ * have it count down at its natural rate.
+ */
+ ctrl_outb(0, TMU_TSTR);
+#if !defined(CONFIG_CPU_SUBTYPE_SH7300) && !defined(CONFIG_CPU_SUBTYPE_SH7760)
+ ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
+#endif
+ ctrl_outw(TMU0_TCR_CALIB, TMU0_TCR);
+ ctrl_outl(0xffffffff, TMU0_TCOR);
+ ctrl_outl(0xffffffff, TMU0_TCNT);
+
+ rtc_get_time(&ts2);
+
+ do {
+ rtc_get_time(&ts1);
+ } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec);
+
+ /* actually start the timer */
+ ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
+
+ do {
+ rtc_get_time(&ts2);
+ } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec);
+
+ freq = 0xffffffff - ctrl_inl(TMU0_TCNT);
+ if (ts2.tv_nsec < ts1.tv_nsec) {
+ ts2.tv_nsec += 1000000000;
+ ts2.tv_sec--;
+ }
+
+ diff_nsec = (ts2.tv_sec - ts1.tv_sec) * 1000000000 + (ts2.tv_nsec - ts1.tv_nsec);
+
+ /* this should work well if the RTC has a precision of n Hz, where
+ * n is an integer. I don't think we have to worry about the other
+ * cases. */
+ factor = (1000000000 + diff_nsec/2) / diff_nsec;
+
+ if (factor * diff_nsec > 1100000000 ||
+ factor * diff_nsec < 900000000)
+ panic("weird RTC (diff_nsec %ld)", diff_nsec);
+
+ return freq * factor;
+}
+
+static void tmu_clk_init(struct clk *clk)
+{
+ u8 divisor = TMU0_TCR_INIT & 0x7;
+ ctrl_outw(TMU0_TCR_INIT, TMU0_TCR);
+ clk->rate = clk->parent->rate / (4 << (divisor << 1));
+}
+
+static void tmu_clk_recalc(struct clk *clk)
+{
+ u8 divisor = ctrl_inw(TMU0_TCR) & 0x7;
+ clk->rate = clk->parent->rate / (4 << (divisor << 1));
+}
+
+static struct clk_ops tmu_clk_ops = {
+ .init = tmu_clk_init,
+ .recalc = tmu_clk_recalc,
+};
+
+static struct clk tmu0_clk = {
+ .name = "tmu0_clk",
+ .ops = &tmu_clk_ops,
+};
+
+static int tmu_timer_init(void)
+{
+ unsigned long interval;
+
+ setup_irq(TIMER_IRQ, &tmu_irq);
+
+ tmu0_clk.parent = clk_get("module_clk");
+
+ /* Start TMU0 */
+ ctrl_outb(0, TMU_TSTR);
+#if !defined(CONFIG_CPU_SUBTYPE_SH7300) && !defined(CONFIG_CPU_SUBTYPE_SH7760)
+ ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
+#endif
+
+ clk_register(&tmu0_clk);
+ clk_enable(&tmu0_clk);
+
+ interval = (clk_get_rate(&tmu0_clk) + HZ / 2) / HZ;
+ printk(KERN_INFO "Interval = %ld\n", interval);
+
+ ctrl_outl(interval, TMU0_TCOR);
+ ctrl_outl(interval, TMU0_TCNT);
+
+ ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
+
+ return 0;
+}
+
+struct sys_timer_ops tmu_timer_ops = {
+ .init = tmu_timer_init,
+ .get_frequency = tmu_timer_get_frequency,
+ .get_offset = tmu_timer_get_offset,
+};
+
+struct sys_timer tmu_timer = {
+ .name = "tmu",
+ .ops = &tmu_timer_ops,
+};
+
diff --git a/arch/sh/kernel/timers/timer.c b/arch/sh/kernel/timers/timer.c
new file mode 100644
index 000000000000..dc1f631053a8
--- /dev/null
+++ b/arch/sh/kernel/timers/timer.c
@@ -0,0 +1,50 @@
+/*
+ * arch/sh/kernel/timers/timer.c - Common timer code
+ *
+ * Copyright (C) 2005 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/string.h>
+#include <asm/timer.h>
+
+static struct sys_timer *sys_timers[] __initdata = {
+#ifdef CONFIG_SH_TMU
+ &tmu_timer,
+#endif
+ NULL,
+};
+
+static char timer_override[10] __initdata;
+static int __init timer_setup(char *str)
+{
+ if (str)
+ strlcpy(timer_override, str, sizeof(timer_override));
+ return 1;
+}
+__setup("timer=", timer_setup);
+
+struct sys_timer *get_sys_timer(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(sys_timers); i++) {
+ struct sys_timer *t = sys_timers[i];
+
+ if (unlikely(!t))
+ break;
+ if (unlikely(timer_override[0]))
+ if ((strcmp(timer_override, t->name) != 0))
+ continue;
+ if (likely(t->ops->init() == 0))
+ return t;
+ }
+
+ return NULL;
+}
+
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
new file mode 100644
index 000000000000..fb586b1cf8bb
--- /dev/null
+++ b/arch/sh/mm/Kconfig
@@ -0,0 +1,233 @@
+menu "Processor selection"
+
+#
+# Processor families
+#
+config CPU_SH2
+ bool
+ select SH_WRITETHROUGH
+
+config CPU_SH3
+ bool
+ select CPU_HAS_INTEVT
+ select CPU_HAS_SR_RB
+
+config CPU_SH4
+ bool
+ select CPU_HAS_INTEVT
+ select CPU_HAS_SR_RB
+
+config CPU_SH4A
+ bool
+ select CPU_SH4
+ select CPU_HAS_INTC2_IRQ
+
+config CPU_SUBTYPE_ST40
+ bool
+ select CPU_SH4
+ select CPU_HAS_INTC2_IRQ
+
+#
+# Processor subtypes
+#
+
+comment "SH-2 Processor Support"
+
+config CPU_SUBTYPE_SH7604
+ bool "Support SH7604 processor"
+ select CPU_SH2
+
+comment "SH-3 Processor Support"
+
+config CPU_SUBTYPE_SH7300
+ bool "Support SH7300 processor"
+ select CPU_SH3
+
+config CPU_SUBTYPE_SH7705
+ bool "Support SH7705 processor"
+ select CPU_SH3
+ select CPU_HAS_PINT_IRQ
+
+config CPU_SUBTYPE_SH7707
+ bool "Support SH7707 processor"
+ select CPU_SH3
+ select CPU_HAS_PINT_IRQ
+ help
+ Select SH7707 if you have a 60 Mhz SH-3 HD6417707 CPU.
+
+config CPU_SUBTYPE_SH7708
+ bool "Support SH7708 processor"
+ select CPU_SH3
+ help
+ Select SH7708 if you have a 60 Mhz SH-3 HD6417708S or
+ if you have a 100 Mhz SH-3 HD6417708R CPU.
+
+config CPU_SUBTYPE_SH7709
+ bool "Support SH7709 processor"
+ select CPU_SH3
+ select CPU_HAS_PINT_IRQ
+ help
+ Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU.
+
+comment "SH-4 Processor Support"
+
+config CPU_SUBTYPE_SH7750
+ bool "Support SH7750 processor"
+ select CPU_SH4
+ help
+ Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU.
+
+config CPU_SUBTYPE_SH7091
+ bool "Support SH7091 processor"
+ select CPU_SH4
+ select CPU_SUBTYPE_SH7750
+ help
+ Select SH7091 if you have an SH-4 based Sega device (such as
+ the Dreamcast, Naomi, and Naomi 2).
+
+config CPU_SUBTYPE_SH7750R
+ bool "Support SH7750R processor"
+ select CPU_SH4
+ select CPU_SUBTYPE_SH7750
+
+config CPU_SUBTYPE_SH7750S
+ bool "Support SH7750S processor"
+ select CPU_SH4
+ select CPU_SUBTYPE_SH7750
+
+config CPU_SUBTYPE_SH7751
+ bool "Support SH7751 processor"
+ select CPU_SH4
+ help
+ Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU,
+ or if you have a HD6417751R CPU.
+
+config CPU_SUBTYPE_SH7751R
+ bool "Support SH7751R processor"
+ select CPU_SH4
+ select CPU_SUBTYPE_SH7751
+
+config CPU_SUBTYPE_SH7760
+ bool "Support SH7760 processor"
+ select CPU_SH4
+ select CPU_HAS_INTC2_IRQ
+
+config CPU_SUBTYPE_SH4_202
+ bool "Support SH4-202 processor"
+ select CPU_SH4
+
+comment "ST40 Processor Support"
+
+config CPU_SUBTYPE_ST40STB1
+ bool "Support ST40STB1/ST40RA processors"
+ select CPU_SUBTYPE_ST40
+ help
+ Select ST40STB1 if you have a ST40RA CPU.
+ This was previously called the ST40STB1, hence the option name.
+
+config CPU_SUBTYPE_ST40GX1
+ bool "Support ST40GX1 processor"
+ select CPU_SUBTYPE_ST40
+ help
+ Select ST40GX1 if you have a ST40GX1 CPU.
+
+comment "SH-4A Processor Support"
+
+config CPU_SUBTYPE_SH73180
+ bool "Support SH73180 processor"
+ select CPU_SH4A
+
+config CPU_SUBTYPE_SH7770
+ bool "Support SH7770 processor"
+ select CPU_SH4A
+
+config CPU_SUBTYPE_SH7780
+ bool "Support SH7780 processor"
+ select CPU_SH4A
+
+endmenu
+
+menu "Memory management options"
+
+config MMU
+ bool "Support for memory management hardware"
+ depends on !CPU_SH2
+ default y
+ help
+ Some SH processors (such as SH-2/SH-2A) lack an MMU. In order to
+ boot on these systems, this option must not be set.
+
+ On other systems (such as the SH-3 and 4) where an MMU exists,
+ turning this off will boot the kernel on these machines with the
+ MMU implicitly switched off.
+
+config 32BIT
+ bool "Support 32-bit physical addressing through PMB"
+ depends on CPU_SH4A
+ default y
+ help
+ If you say Y here, physical addressing will be extended to
+ 32-bits through the SH-4A PMB. If this is not set, legacy
+ 29-bit physical addressing will be used.
+
+choice
+ prompt "HugeTLB page size"
+ depends on HUGETLB_PAGE && CPU_SH4 && MMU
+ default HUGETLB_PAGE_SIZE_64K
+
+config HUGETLB_PAGE_SIZE_64K
+ bool "64K"
+
+config HUGETLB_PAGE_SIZE_1MB
+ bool "1MB"
+
+endchoice
+
+source "mm/Kconfig"
+
+endmenu
+
+menu "Cache configuration"
+
+config SH7705_CACHE_32KB
+ bool "Enable 32KB cache size for SH7705"
+ depends on CPU_SUBTYPE_SH7705
+ default y
+
+config SH_DIRECT_MAPPED
+ bool "Use direct-mapped caching"
+ default n
+ help
+ Selecting this option will configure the caches to be direct-mapped,
+ even if the cache supports a 2 or 4-way mode. This is useful primarily
+ for debugging on platforms with 2 and 4-way caches (SH7750R/SH7751R,
+ SH4-202, SH4-501, etc.)
+
+ Turn this option off for platforms that do not have a direct-mapped
+ cache, and you have no need to run the caches in such a configuration.
+
+config SH_WRITETHROUGH
+ bool "Use write-through caching"
+ default y if CPU_SH2
+ help
+ Selecting this option will configure the caches in write-through
+ mode, as opposed to the default write-back configuration.
+
+ Since there's sill some aliasing issues on SH-4, this option will
+ unfortunately still require the majority of flushing functions to
+ be implemented to deal with aliasing.
+
+ If unsure, say N.
+
+config SH_OCRAM
+ bool "Operand Cache RAM (OCRAM) support"
+ help
+ Selecting this option will automatically tear down the number of
+ sets in the dcache by half, which in turn exposes a memory range.
+
+ The addresses for the OC RAM base will vary according to the
+ processor version. Consult vendor documentation for specifics.
+
+ If unsure, say N.
+
+endmenu
diff --git a/arch/sh/mm/ioremap.c b/arch/sh/mm/ioremap.c
index e794e27a72f1..96fa4a999e2a 100644
--- a/arch/sh/mm/ioremap.c
+++ b/arch/sh/mm/ioremap.c
@@ -6,13 +6,19 @@
* 640k-1MB IO memory area on PC's
*
* (C) Copyright 1995 1996 Linus Torvalds
+ * (C) Copyright 2005, 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
*/
-
#include <linux/vmalloc.h>
+#include <linux/module.h>
#include <linux/mm.h>
#include <asm/io.h>
#include <asm/page.h>
#include <asm/pgalloc.h>
+#include <asm/addrspace.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
@@ -80,9 +86,15 @@ int remap_area_pages(unsigned long address, unsigned long phys_addr,
if (address >= end)
BUG();
do {
+ pud_t *pud;
pmd_t *pmd;
- pmd = pmd_alloc(&init_mm, dir, address);
+
error = -ENOMEM;
+
+ pud = pud_alloc(&init_mm, dir, address);
+ if (!pud)
+ break;
+ pmd = pmd_alloc(&init_mm, pud, address);
if (!pmd)
break;
if (remap_area_pmd(pmd, address, end - address,
@@ -97,10 +109,6 @@ int remap_area_pages(unsigned long address, unsigned long phys_addr,
}
/*
- * Generic mapping function (not visible outside):
- */
-
-/*
* Remap an arbitrary physical address space into the kernel virtual
* address space. Needed when the kernel wants to access high addresses
* directly.
@@ -109,11 +117,11 @@ int remap_area_pages(unsigned long address, unsigned long phys_addr,
* have to convert them into an offset in a page-aligned mapping, but the
* caller shouldn't need to know that small detail.
*/
-void * p3_ioremap(unsigned long phys_addr, unsigned long size, unsigned long flags)
+void __iomem *__ioremap(unsigned long phys_addr, unsigned long size,
+ unsigned long flags)
{
- void * addr;
struct vm_struct * area;
- unsigned long offset, last_addr;
+ unsigned long offset, last_addr, addr, orig_addr;
/* Don't allow wraparound or zero size */
last_addr = phys_addr + size - 1;
@@ -124,7 +132,7 @@ void * p3_ioremap(unsigned long phys_addr, unsigned long size, unsigned long fla
* Don't remap the low PCI/ISA area, it's always mapped..
*/
if (phys_addr >= 0xA0000 && last_addr < 0x100000)
- return phys_to_virt(phys_addr);
+ return (void __iomem *)phys_to_virt(phys_addr);
/*
* Don't allow anybody to remap normal RAM that we're using..
@@ -146,16 +154,71 @@ void * p3_ioremap(unsigned long phys_addr, unsigned long size, unsigned long fla
if (!area)
return NULL;
area->phys_addr = phys_addr;
- addr = area->addr;
- if (remap_area_pages((unsigned long) addr, phys_addr, size, flags)) {
- vunmap(addr);
- return NULL;
+ orig_addr = addr = (unsigned long)area->addr;
+
+#ifdef CONFIG_32BIT
+ /*
+ * First try to remap through the PMB once a valid VMA has been
+ * established. Smaller allocations (or the rest of the size
+ * remaining after a PMB mapping due to the size not being
+ * perfectly aligned on a PMB size boundary) are then mapped
+ * through the UTLB using conventional page tables.
+ *
+ * PMB entries are all pre-faulted.
+ */
+ if (unlikely(size >= 0x1000000)) {
+ unsigned long mapped = pmb_remap(addr, phys_addr, size, flags);
+
+ if (likely(mapped)) {
+ addr += mapped;
+ phys_addr += mapped;
+ size -= mapped;
+ }
}
- return (void *) (offset + (char *)addr);
+#endif
+
+ if (likely(size))
+ if (remap_area_pages(addr, phys_addr, size, flags)) {
+ vunmap((void *)orig_addr);
+ return NULL;
+ }
+
+ return (void __iomem *)(offset + (char *)orig_addr);
}
+EXPORT_SYMBOL(__ioremap);
-void p3_iounmap(void *addr)
+void __iounmap(void __iomem *addr)
{
- if (addr > high_memory)
- vfree((void *)(PAGE_MASK & (unsigned long)addr));
+ unsigned long vaddr = (unsigned long __force)addr;
+ struct vm_struct *p;
+
+ if (PXSEG(vaddr) < P3SEG)
+ return;
+
+#ifdef CONFIG_32BIT
+ /*
+ * Purge any PMB entries that may have been established for this
+ * mapping, then proceed with conventional VMA teardown.
+ *
+ * XXX: Note that due to the way that remove_vm_area() does
+ * matching of the resultant VMA, we aren't able to fast-forward
+ * the address past the PMB space until the end of the VMA where
+ * the page tables reside. As such, unmap_vm_area() will be
+ * forced to linearly scan over the area until it finds the page
+ * tables where PTEs that need to be unmapped actually reside,
+ * which is far from optimal. Perhaps we need to use a separate
+ * VMA for the PMB mappings?
+ * -- PFM.
+ */
+ pmb_unmap(vaddr);
+#endif
+
+ p = remove_vm_area((void *)(vaddr & PAGE_MASK));
+ if (!p) {
+ printk(KERN_ERR "%s: bad address %p\n", __FUNCTION__, addr);
+ return;
+ }
+
+ kfree(p);
}
+EXPORT_SYMBOL(__iounmap);
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 0693fbd1f956..182fe9092577 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -10,10 +10,7 @@ SE SH_SOLUTION_ENGINE
7300SE SH_7300_SOLUTION_ENGINE
73180SE SH_73180_SOLUTION_ENGINE
7751SYSTEMH SH_7751_SYSTEMH
-HP600 SH_HP600
-HP620 SH_HP620
-HP680 SH_HP680
-HP690 SH_HP690
+HP6XX SH_HP6XX
HD64461 HD64461
HD64465 HD64465
SH2000 SH_SH2000
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index 2efc4be22709..2f9deca31cc9 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -305,7 +305,11 @@ config ARCH_DISCONTIGMEM_DEFAULT
config ARCH_SPARSEMEM_ENABLE
def_bool y
- depends on NUMA
+ depends on (NUMA || EXPERIMENTAL)
+
+config ARCH_MEMORY_PROBE
+ def_bool y
+ depends on MEMORY_HOTPLUG
config ARCH_FLATMEM_ENABLE
def_bool y
@@ -315,6 +319,7 @@ source "mm/Kconfig"
config HAVE_ARCH_EARLY_PFN_TO_NID
def_bool y
+ depends on NUMA
config NR_CPUS
int "Maximum number of CPUs (2-256)"
@@ -350,7 +355,7 @@ config HPET_TIMER
<http://www.intel.com/hardwaredesign/hpetspec.htm>.
config X86_PM_TIMER
- bool "PM timer"
+ bool "PM timer" if EMBEDDED
depends on ACPI
default y
help
diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig
index 054dcd8a5e9d..5231fe83ea4b 100644
--- a/arch/x86_64/defconfig
+++ b/arch/x86_64/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.15-git7
-# Wed Jan 11 11:57:36 2006
+# Linux kernel version: 2.6.15-git12
+# Mon Jan 16 13:09:08 2006
#
CONFIG_X86_64=y
CONFIG_64BIT=y
@@ -319,6 +319,11 @@ CONFIG_IPV6=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -537,8 +542,7 @@ CONFIG_SCSI_SATA_INTEL_COMBINED=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE is not set
+# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -805,6 +809,7 @@ CONFIG_SOFT_WATCHDOG=y
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
+# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
@@ -850,6 +855,12 @@ CONFIG_HPET_MMAP=y
# CONFIG_I2C is not set
#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
@@ -992,6 +1003,7 @@ CONFIG_USB_STORAGE=y
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
@@ -1276,6 +1288,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
# CONFIG_FRAME_POINTER is not set
+# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_INIT_DEBUG=y
# CONFIG_DEBUG_RODATA is not set
diff --git a/arch/x86_64/ia32/Makefile b/arch/x86_64/ia32/Makefile
index 051608d55920..929e6b0771f8 100644
--- a/arch/x86_64/ia32/Makefile
+++ b/arch/x86_64/ia32/Makefile
@@ -3,7 +3,8 @@
#
obj-$(CONFIG_IA32_EMULATION) := ia32entry.o sys_ia32.o ia32_signal.o tls32.o \
- ia32_binfmt.o fpu32.o ptrace32.o syscall32.o syscall32_syscall.o
+ ia32_binfmt.o fpu32.o ptrace32.o syscall32.o syscall32_syscall.o \
+ mmap32.o
sysv-$(CONFIG_SYSVIPC) := ipc32.o
obj-$(CONFIG_IA32_EMULATION) += $(sysv-y)
diff --git a/arch/x86_64/ia32/ia32_binfmt.c b/arch/x86_64/ia32/ia32_binfmt.c
index 029bddab0459..572b3b28772d 100644
--- a/arch/x86_64/ia32/ia32_binfmt.c
+++ b/arch/x86_64/ia32/ia32_binfmt.c
@@ -293,8 +293,6 @@ int ia32_setup_arg_pages(struct linux_binprm *bprm, unsigned long stack_top, int
} while(0)
-#define elf_map elf32_map
-
#include <linux/module.h>
MODULE_DESCRIPTION("Binary format loader for compatibility with IA32 ELF binaries.");
@@ -390,21 +388,6 @@ int ia32_setup_arg_pages(struct linux_binprm *bprm, unsigned long stack_top,
}
EXPORT_SYMBOL(ia32_setup_arg_pages);
-static unsigned long
-elf32_map (struct file *filep, unsigned long addr, struct elf_phdr *eppnt, int prot, int type)
-{
- unsigned long map_addr;
- struct task_struct *me = current;
-
- down_write(&me->mm->mmap_sem);
- map_addr = do_mmap(filep, ELF_PAGESTART(addr),
- eppnt->p_filesz + ELF_PAGEOFFSET(eppnt->p_vaddr), prot,
- type,
- eppnt->p_offset - ELF_PAGEOFFSET(eppnt->p_vaddr));
- up_write(&me->mm->mmap_sem);
- return(map_addr);
-}
-
#ifdef CONFIG_SYSCTL
/* Register vsyscall32 into the ABI table */
#include <linux/sysctl.h>
diff --git a/arch/x86_64/ia32/mmap32.c b/arch/x86_64/ia32/mmap32.c
new file mode 100644
index 000000000000..079f4132575c
--- /dev/null
+++ b/arch/x86_64/ia32/mmap32.c
@@ -0,0 +1,78 @@
+/*
+ * linux/arch/x86_64/ia32/mm/mmap.c
+ *
+ * flexible mmap layout support
+ *
+ * Based on the i386 version which was
+ *
+ * Copyright 2003-2004 Red Hat Inc., Durham, North Carolina.
+ * All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * Started by Ingo Molnar <mingo@elte.hu>
+ */
+
+#include <linux/personality.h>
+#include <linux/mm.h>
+#include <linux/random.h>
+
+/*
+ * Top of mmap area (just below the process stack).
+ *
+ * Leave an at least ~128 MB hole.
+ */
+#define MIN_GAP (128*1024*1024)
+#define MAX_GAP (TASK_SIZE/6*5)
+
+static inline unsigned long mmap_base(struct mm_struct *mm)
+{
+ unsigned long gap = current->signal->rlim[RLIMIT_STACK].rlim_cur;
+ unsigned long random_factor = 0;
+
+ if (current->flags & PF_RANDOMIZE)
+ random_factor = get_random_int() % (1024*1024);
+
+ if (gap < MIN_GAP)
+ gap = MIN_GAP;
+ else if (gap > MAX_GAP)
+ gap = MAX_GAP;
+
+ return PAGE_ALIGN(TASK_SIZE - gap - random_factor);
+}
+
+/*
+ * This function, called very early during the creation of a new
+ * process VM image, sets up which VM layout function to use:
+ */
+void ia32_pick_mmap_layout(struct mm_struct *mm)
+{
+ /*
+ * Fall back to the standard layout if the personality
+ * bit is set, or if the expected stack growth is unlimited:
+ */
+ if (sysctl_legacy_va_layout ||
+ (current->personality & ADDR_COMPAT_LAYOUT) ||
+ current->signal->rlim[RLIMIT_STACK].rlim_cur == RLIM_INFINITY) {
+ mm->mmap_base = TASK_UNMAPPED_BASE;
+ mm->get_unmapped_area = arch_get_unmapped_area;
+ mm->unmap_area = arch_unmap_area;
+ } else {
+ mm->mmap_base = mmap_base(mm);
+ mm->get_unmapped_area = arch_get_unmapped_area_topdown;
+ mm->unmap_area = arch_unmap_area_topdown;
+ }
+}
diff --git a/arch/x86_64/kernel/apic.c b/arch/x86_64/kernel/apic.c
index 8fdd089fd17e..5d3c5b07b8db 100644
--- a/arch/x86_64/kernel/apic.c
+++ b/arch/x86_64/kernel/apic.c
@@ -499,13 +499,10 @@ static int lapic_resume(struct sys_device *dev)
if (!apic_pm_state.active)
return 0;
- /* XXX: Pavel needs this for S3 resume, but can't explain why */
- set_fixmap_nocache(FIX_APIC_BASE, APIC_DEFAULT_PHYS_BASE);
-
local_irq_save(flags);
rdmsr(MSR_IA32_APICBASE, l, h);
l &= ~MSR_IA32_APICBASE_BASE;
- l |= MSR_IA32_APICBASE_ENABLE | APIC_DEFAULT_PHYS_BASE;
+ l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
wrmsr(MSR_IA32_APICBASE, l, h);
apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED);
apic_write(APIC_ID, apic_pm_state.apic_id);
diff --git a/arch/x86_64/kernel/asm-offsets.c b/arch/x86_64/kernel/asm-offsets.c
index cfb4f9cebea4..38834bbbae11 100644
--- a/arch/x86_64/kernel/asm-offsets.c
+++ b/arch/x86_64/kernel/asm-offsets.c
@@ -43,6 +43,7 @@ int main(void)
ENTRY(irqcount);
ENTRY(cpunumber);
ENTRY(irqstackptr);
+ ENTRY(data_offset);
BLANK();
#undef ENTRY
#ifdef CONFIG_IA32_EMULATION
@@ -66,8 +67,6 @@ int main(void)
DEFINE(pbe_orig_address, offsetof(struct pbe, orig_address));
DEFINE(pbe_next, offsetof(struct pbe, next));
BLANK();
-#if DEBUG_STKSZ > EXCEPTION_STKSZ
- DEFINE(DEBUG_IST, DEBUG_STACK);
-#endif
+ DEFINE(TSS_ist, offsetof(struct tss_struct, ist));
return 0;
}
diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S
index 632fc0f59fcc..dbdba56e8faa 100644
--- a/arch/x86_64/kernel/entry.S
+++ b/arch/x86_64/kernel/entry.S
@@ -41,6 +41,7 @@
#include <asm/unistd.h>
#include <asm/thread_info.h>
#include <asm/hw_irq.h>
+#include <asm/page.h>
.code64
@@ -674,9 +675,6 @@ ENTRY(spurious_interrupt)
/* error code is on the stack already */
/* handle NMI like exceptions that can happen everywhere */
-#ifndef DEBUG_IST
-# define DEBUG_IST 0
-#endif
.macro paranoidentry sym, ist=0
SAVE_ALL
cld
@@ -695,11 +693,11 @@ ENTRY(spurious_interrupt)
movq ORIG_RAX(%rsp),%rsi
movq $-1,ORIG_RAX(%rsp)
.if \ist
- subq $EXCEPTION_STACK_SIZE, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
+ subq $EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
.endif
call \sym
.if \ist
- addq $EXCEPTION_STACK_SIZE, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
+ addq $EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
.endif
cli
.endm
@@ -918,7 +916,7 @@ KPROBE_ENTRY(debug)
INTR_FRAME
pushq $0
CFI_ADJUST_CFA_OFFSET 8
- paranoidentry do_debug, DEBUG_IST
+ paranoidentry do_debug, DEBUG_STACK
jmp paranoid_exit
CFI_ENDPROC
.previous .text
@@ -976,7 +974,7 @@ KPROBE_ENTRY(int3)
INTR_FRAME
pushq $0
CFI_ADJUST_CFA_OFFSET 8
- paranoidentry do_int3, DEBUG_IST
+ paranoidentry do_int3, DEBUG_STACK
jmp paranoid_exit
CFI_ENDPROC
.previous .text
diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S
index 38fc3d5112e7..692c737feddb 100644
--- a/arch/x86_64/kernel/head.S
+++ b/arch/x86_64/kernel/head.S
@@ -241,104 +241,70 @@ ljumpvector:
ENTRY(stext)
ENTRY(_stext)
-.org 0x1000
-ENTRY(init_level4_pgt)
+ $page = 0
+#define NEXT_PAGE(name) \
+ $page = $page + 1; \
+ .org $page * 0x1000; \
+ phys_/**/name = $page * 0x1000 + __PHYSICAL_START; \
+ENTRY(name)
+
+NEXT_PAGE(init_level4_pgt)
/* This gets initialized in x86_64_start_kernel */
.fill 512,8,0
-.org 0x2000
-ENTRY(level3_ident_pgt)
- .quad 0x0000000000004007 + __PHYSICAL_START
+NEXT_PAGE(level3_ident_pgt)
+ .quad phys_level2_ident_pgt | 0x007
.fill 511,8,0
-.org 0x3000
-ENTRY(level3_kernel_pgt)
+NEXT_PAGE(level3_kernel_pgt)
.fill 510,8,0
/* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */
- .quad 0x0000000000005007 + __PHYSICAL_START /* -> level2_kernel_pgt */
+ .quad phys_level2_kernel_pgt | 0x007
.fill 1,8,0
-.org 0x4000
-ENTRY(level2_ident_pgt)
+NEXT_PAGE(level2_ident_pgt)
/* 40MB for bootup. */
- .quad 0x0000000000000083
- .quad 0x0000000000200083
- .quad 0x0000000000400083
- .quad 0x0000000000600083
- .quad 0x0000000000800083
- .quad 0x0000000000A00083
- .quad 0x0000000000C00083
- .quad 0x0000000000E00083
- .quad 0x0000000001000083
- .quad 0x0000000001200083
- .quad 0x0000000001400083
- .quad 0x0000000001600083
- .quad 0x0000000001800083
- .quad 0x0000000001A00083
- .quad 0x0000000001C00083
- .quad 0x0000000001E00083
- .quad 0x0000000002000083
- .quad 0x0000000002200083
- .quad 0x0000000002400083
- .quad 0x0000000002600083
+ i = 0
+ .rept 20
+ .quad i << 21 | 0x083
+ i = i + 1
+ .endr
/* Temporary mappings for the super early allocator in arch/x86_64/mm/init.c */
.globl temp_boot_pmds
temp_boot_pmds:
.fill 492,8,0
-.org 0x5000
-ENTRY(level2_kernel_pgt)
+NEXT_PAGE(level2_kernel_pgt)
/* 40MB kernel mapping. The kernel code cannot be bigger than that.
When you change this change KERNEL_TEXT_SIZE in page.h too. */
/* (2^48-(2*1024*1024*1024)-((2^39)*511)-((2^30)*510)) = 0 */
- .quad 0x0000000000000183
- .quad 0x0000000000200183
- .quad 0x0000000000400183
- .quad 0x0000000000600183
- .quad 0x0000000000800183
- .quad 0x0000000000A00183
- .quad 0x0000000000C00183
- .quad 0x0000000000E00183
- .quad 0x0000000001000183
- .quad 0x0000000001200183
- .quad 0x0000000001400183
- .quad 0x0000000001600183
- .quad 0x0000000001800183
- .quad 0x0000000001A00183
- .quad 0x0000000001C00183
- .quad 0x0000000001E00183
- .quad 0x0000000002000183
- .quad 0x0000000002200183
- .quad 0x0000000002400183
- .quad 0x0000000002600183
+ i = 0
+ .rept 20
+ .quad i << 21 | 0x183
+ i = i + 1
+ .endr
/* Module mapping starts here */
.fill 492,8,0
-.org 0x6000
-ENTRY(empty_zero_page)
-
-.org 0x7000
-ENTRY(empty_bad_page)
+NEXT_PAGE(empty_zero_page)
-.org 0x8000
-ENTRY(empty_bad_pte_table)
+NEXT_PAGE(level3_physmem_pgt)
+ .quad phys_level2_kernel_pgt | 0x007 /* so that __va works even before pagetable_init */
+ .fill 511,8,0
-.org 0x9000
-ENTRY(empty_bad_pmd_table)
+#undef NEXT_PAGE
-.org 0xa000
-ENTRY(level3_physmem_pgt)
- .quad 0x0000000000005007 + __PHYSICAL_START /* -> level2_kernel_pgt (so that __va works even before pagetable_init) */
+ .data
- .org 0xb000
#ifdef CONFIG_ACPI_SLEEP
+ .align PAGE_SIZE
ENTRY(wakeup_level4_pgt)
- .quad 0x0000000000002007 + __PHYSICAL_START /* -> level3_ident_pgt */
+ .quad phys_level3_ident_pgt | 0x007
.fill 255,8,0
- .quad 0x000000000000a007 + __PHYSICAL_START
+ .quad phys_level3_physmem_pgt | 0x007
.fill 254,8,0
/* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
- .quad 0x0000000000003007 + __PHYSICAL_START /* -> level3_kernel_pgt */
+ .quad phys_level3_kernel_pgt | 0x007
#endif
#ifndef CONFIG_HOTPLUG_CPU
@@ -352,12 +318,12 @@ ENTRY(wakeup_level4_pgt)
*/
.align PAGE_SIZE
ENTRY(boot_level4_pgt)
- .quad 0x0000000000002007 + __PHYSICAL_START /* -> level3_ident_pgt */
+ .quad phys_level3_ident_pgt | 0x007
.fill 255,8,0
- .quad 0x000000000000a007 + __PHYSICAL_START
+ .quad phys_level3_physmem_pgt | 0x007
.fill 254,8,0
/* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
- .quad 0x0000000000003007 + __PHYSICAL_START /* -> level3_kernel_pgt */
+ .quad phys_level3_kernel_pgt | 0x007
.data
diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c
index 6eff51e9400c..8ac4db09610a 100644
--- a/arch/x86_64/kernel/setup64.c
+++ b/arch/x86_64/kernel/setup64.c
@@ -38,7 +38,7 @@ struct desc_ptr idt_descr = { 256 * 16, (unsigned long) idt_table };
char boot_cpu_stack[IRQSTACKSIZE] __attribute__((section(".bss.page_aligned")));
unsigned long __supported_pte_mask __read_mostly = ~0UL;
-static int do_not_nx __initdata = 0;
+static int do_not_nx __cpuinitdata = 0;
/* noexec=on|off
Control non executable mappings for 64bit processes.
diff --git a/arch/x86_64/mm/Makefile b/arch/x86_64/mm/Makefile
index 1d232a87f113..d25ac86fe27a 100644
--- a/arch/x86_64/mm/Makefile
+++ b/arch/x86_64/mm/Makefile
@@ -2,7 +2,7 @@
# Makefile for the linux x86_64-specific parts of the memory manager.
#
-obj-y := init.o fault.o ioremap.o extable.o pageattr.o
+obj-y := init.o fault.o ioremap.o extable.o pageattr.o mmap.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_NUMA) += numa.o
obj-$(CONFIG_K8_NUMA) += k8topology.o
diff --git a/arch/x86_64/mm/init.c b/arch/x86_64/mm/init.c
index eca60125efc3..7af1742aa958 100644
--- a/arch/x86_64/mm/init.c
+++ b/arch/x86_64/mm/init.c
@@ -24,6 +24,8 @@
#include <linux/proc_fs.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/memory_hotplug.h>
#include <asm/processor.h>
#include <asm/system.h>
@@ -180,13 +182,19 @@ static struct temp_map {
{}
};
-static __init void *alloc_low_page(int *index, unsigned long *phys)
+static __meminit void *alloc_low_page(int *index, unsigned long *phys)
{
struct temp_map *ti;
int i;
unsigned long pfn = table_end++, paddr;
void *adr;
+ if (after_bootmem) {
+ adr = (void *)get_zeroed_page(GFP_ATOMIC);
+ *phys = __pa(adr);
+ return adr;
+ }
+
if (pfn >= end_pfn)
panic("alloc_low_page: ran out of memory");
for (i = 0; temp_mappings[i].allocated; i++) {
@@ -199,55 +207,86 @@ static __init void *alloc_low_page(int *index, unsigned long *phys)
ti->allocated = 1;
__flush_tlb();
adr = ti->address + ((pfn << PAGE_SHIFT) & ~PMD_MASK);
+ memset(adr, 0, PAGE_SIZE);
*index = i;
*phys = pfn * PAGE_SIZE;
return adr;
}
-static __init void unmap_low_page(int i)
+static __meminit void unmap_low_page(int i)
{
- struct temp_map *ti = &temp_mappings[i];
+ struct temp_map *ti;
+
+ if (after_bootmem)
+ return;
+
+ ti = &temp_mappings[i];
set_pmd(ti->pmd, __pmd(0));
ti->allocated = 0;
}
-static void __init phys_pud_init(pud_t *pud, unsigned long address, unsigned long end)
+static void __meminit
+phys_pmd_init(pmd_t *pmd, unsigned long address, unsigned long end)
+{
+ int i;
+
+ for (i = 0; i < PTRS_PER_PMD; pmd++, i++, address += PMD_SIZE) {
+ unsigned long entry;
+
+ if (address > end) {
+ for (; i < PTRS_PER_PMD; i++, pmd++)
+ set_pmd(pmd, __pmd(0));
+ break;
+ }
+ entry = _PAGE_NX|_PAGE_PSE|_KERNPG_TABLE|_PAGE_GLOBAL|address;
+ entry &= __supported_pte_mask;
+ set_pmd(pmd, __pmd(entry));
+ }
+}
+
+static void __meminit
+phys_pmd_update(pud_t *pud, unsigned long address, unsigned long end)
+{
+ pmd_t *pmd = pmd_offset(pud, (unsigned long)__va(address));
+
+ if (pmd_none(*pmd)) {
+ spin_lock(&init_mm.page_table_lock);
+ phys_pmd_init(pmd, address, end);
+ spin_unlock(&init_mm.page_table_lock);
+ __flush_tlb_all();
+ }
+}
+
+static void __meminit phys_pud_init(pud_t *pud, unsigned long address, unsigned long end)
{
- long i, j;
+ long i = pud_index(address);
- i = pud_index(address);
pud = pud + i;
+
+ if (after_bootmem && pud_val(*pud)) {
+ phys_pmd_update(pud, address, end);
+ return;
+ }
+
for (; i < PTRS_PER_PUD; pud++, i++) {
int map;
unsigned long paddr, pmd_phys;
pmd_t *pmd;
- paddr = address + i*PUD_SIZE;
- if (paddr >= end) {
- for (; i < PTRS_PER_PUD; i++, pud++)
- set_pud(pud, __pud(0));
+ paddr = (address & PGDIR_MASK) + i*PUD_SIZE;
+ if (paddr >= end)
break;
- }
- if (!e820_mapped(paddr, paddr+PUD_SIZE, 0)) {
+ if (!after_bootmem && !e820_mapped(paddr, paddr+PUD_SIZE, 0)) {
set_pud(pud, __pud(0));
continue;
}
pmd = alloc_low_page(&map, &pmd_phys);
+ spin_lock(&init_mm.page_table_lock);
set_pud(pud, __pud(pmd_phys | _KERNPG_TABLE));
- for (j = 0; j < PTRS_PER_PMD; pmd++, j++, paddr += PMD_SIZE) {
- unsigned long pe;
-
- if (paddr >= end) {
- for (; j < PTRS_PER_PMD; j++, pmd++)
- set_pmd(pmd, __pmd(0));
- break;
- }
- pe = _PAGE_NX|_PAGE_PSE | _KERNPG_TABLE | _PAGE_GLOBAL | paddr;
- pe &= __supported_pte_mask;
- set_pmd(pmd, __pmd(pe));
- }
+ phys_pmd_init(pmd, paddr, end);
+ spin_unlock(&init_mm.page_table_lock);
unmap_low_page(map);
}
__flush_tlb();
@@ -262,30 +301,25 @@ static void __init find_early_table_space(unsigned long end)
tables = round_up(puds * sizeof(pud_t), PAGE_SIZE) +
round_up(pmds * sizeof(pmd_t), PAGE_SIZE);
- /* Put page tables beyond the DMA zones if possible.
- RED-PEN might be better to spread them out more over
- memory to avoid hotspots */
- if (end > MAX_DMA32_PFN<<PAGE_SHIFT)
- start = MAX_DMA32_PFN << PAGE_SHIFT;
- else if (end > MAX_DMA_PFN << PAGE_SHIFT)
- start = MAX_DMA_PFN << PAGE_SHIFT;
- else
- start = 0x8000;
-
- table_start = find_e820_area(start, end, tables);
- if (table_start == -1)
- table_start = find_e820_area(0x8000, end, tables);
+ /* RED-PEN putting page tables only on node 0 could
+ cause a hotspot and fill up ZONE_DMA. The page tables
+ need roughly 0.5KB per GB. */
+ start = 0x8000;
+ table_start = find_e820_area(start, end, tables);
if (table_start == -1UL)
panic("Cannot find space for the kernel page tables");
table_start >>= PAGE_SHIFT;
table_end = table_start;
+
+ early_printk("kernel direct mapping tables up to %lx @ %lx-%lx\n",
+ end, table_start << PAGE_SHIFT, table_end << PAGE_SHIFT);
}
/* Setup the direct mapping of the physical memory at PAGE_OFFSET.
This runs before bootmem is initialized and gets pages directly from the
physical memory. To access them they are temporarily mapped. */
-void __init init_memory_mapping(unsigned long start, unsigned long end)
+void __meminit init_memory_mapping(unsigned long start, unsigned long end)
{
unsigned long next;
@@ -297,7 +331,8 @@ void __init init_memory_mapping(unsigned long start, unsigned long end)
* mapped. Unfortunately this is done currently before the nodes are
* discovered.
*/
- find_early_table_space(end);
+ if (!after_bootmem)
+ find_early_table_space(end);
start = (unsigned long)__va(start);
end = (unsigned long)__va(end);
@@ -305,20 +340,26 @@ void __init init_memory_mapping(unsigned long start, unsigned long end)
for (; start < end; start = next) {
int map;
unsigned long pud_phys;
- pud_t *pud = alloc_low_page(&map, &pud_phys);
+ pgd_t *pgd = pgd_offset_k(start);
+ pud_t *pud;
+
+ if (after_bootmem)
+ pud = pud_offset_k(pgd, __PAGE_OFFSET);
+ else
+ pud = alloc_low_page(&map, &pud_phys);
+
next = start + PGDIR_SIZE;
if (next > end)
next = end;
phys_pud_init(pud, __pa(start), __pa(next));
- set_pgd(pgd_offset_k(start), mk_kernel_pgd(pud_phys));
+ if (!after_bootmem)
+ set_pgd(pgd_offset_k(start), mk_kernel_pgd(pud_phys));
unmap_low_page(map);
}
- asm volatile("movq %%cr4,%0" : "=r" (mmu_cr4_features));
+ if (!after_bootmem)
+ asm volatile("movq %%cr4,%0" : "=r" (mmu_cr4_features));
__flush_tlb_all();
- early_printk("kernel direct mapping tables upto %lx @ %lx-%lx\n", end,
- table_start<<PAGE_SHIFT,
- table_end<<PAGE_SHIFT);
}
void __cpuinit zap_low_mappings(int cpu)
@@ -393,6 +434,9 @@ size_zones(unsigned long *z, unsigned long *h,
void __init paging_init(void)
{
unsigned long zones[MAX_NR_ZONES], holes[MAX_NR_ZONES];
+
+ memory_present(0, 0, end_pfn);
+ sparse_init();
size_zones(zones, holes, 0, end_pfn);
free_area_init_node(0, NODE_DATA(0), zones,
__pa(PAGE_OFFSET) >> PAGE_SHIFT, holes);
@@ -433,6 +477,50 @@ void __init clear_kernel_mapping(unsigned long address, unsigned long size)
__flush_tlb_all();
}
+/*
+ * Memory hotplug specific functions
+ * These are only for non-NUMA machines right now.
+ */
+#ifdef CONFIG_MEMORY_HOTPLUG
+
+void online_page(struct page *page)
+{
+ ClearPageReserved(page);
+ set_page_count(page, 1);
+ __free_page(page);
+ totalram_pages++;
+ num_physpages++;
+}
+
+int add_memory(u64 start, u64 size)
+{
+ struct pglist_data *pgdat = NODE_DATA(0);
+ struct zone *zone = pgdat->node_zones + MAX_NR_ZONES-2;
+ unsigned long start_pfn = start >> PAGE_SHIFT;
+ unsigned long nr_pages = size >> PAGE_SHIFT;
+ int ret;
+
+ ret = __add_pages(zone, start_pfn, nr_pages);
+ if (ret)
+ goto error;
+
+ init_memory_mapping(start, (start + size -1));
+
+ return ret;
+error:
+ printk("%s: Problem encountered in __add_pages!\n", __func__);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(add_memory);
+
+int remove_memory(u64 start, u64 size)
+{
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(remove_memory);
+
+#endif
+
static struct kcore_list kcore_mem, kcore_vmalloc, kcore_kernel, kcore_modules,
kcore_vsyscall;
@@ -539,7 +627,7 @@ void mark_rodata_ro(void)
#ifdef CONFIG_BLK_DEV_INITRD
void free_initrd_mem(unsigned long start, unsigned long end)
{
- if (start < (unsigned long)&_end)
+ if (start >= end)
return;
printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
for (; start < end; start += PAGE_SIZE) {
diff --git a/arch/x86_64/mm/mmap.c b/arch/x86_64/mm/mmap.c
new file mode 100644
index 000000000000..43e9b99bdf25
--- /dev/null
+++ b/arch/x86_64/mm/mmap.c
@@ -0,0 +1,30 @@
+/* Copyright 2005 Andi Kleen, SuSE Labs.
+ * Licensed under GPL, v.2
+ */
+#include <linux/config.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/random.h>
+#include <asm/ia32.h>
+
+/* Notebook: move the mmap code from sys_x86_64.c over here. */
+
+void arch_pick_mmap_layout(struct mm_struct *mm)
+{
+#ifdef CONFIG_IA32_EMULATION
+ if (current_thread_info()->flags & _TIF_IA32)
+ return ia32_pick_mmap_layout(mm);
+#endif
+ mm->mmap_base = TASK_UNMAPPED_BASE;
+ if (current->flags & PF_RANDOMIZE) {
+ /* Add 28bit randomness which is about 40bits of address space
+ because mmap base has to be page aligned.
+ or ~1/128 of the total user VM
+ (total user address space is 47bits) */
+ unsigned rnd = get_random_int() & 0xfffffff;
+ mm->mmap_base += ((unsigned long)rnd) << PAGE_SHIFT;
+ }
+ mm->get_unmapped_area = arch_get_unmapped_area;
+ mm->unmap_area = arch_unmap_area;
+}
+
diff --git a/drivers/block/ps2esdi.c b/drivers/block/ps2esdi.c
index 43415f69839f..bea75f2cb211 100644
--- a/drivers/block/ps2esdi.c
+++ b/drivers/block/ps2esdi.c
@@ -43,6 +43,7 @@
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/module.h>
+#include <linux/hdreg.h>
#include <asm/system.h>
#include <asm/io.h>
diff --git a/drivers/char/esp.c b/drivers/char/esp.c
index dd5dc8fa490d..3f3ac039f4d9 100644
--- a/drivers/char/esp.c
+++ b/drivers/char/esp.c
@@ -2492,6 +2492,7 @@ static int __init espserial_init(void)
}
memset((void *)info, 0, sizeof(struct esp_struct));
+ spin_lock_init(&info->lock);
/* rx_trigger, tx_trigger are needed by autoconfig */
info->config.rx_trigger = rx_trigger;
info->config.tx_trigger = tx_trigger;
@@ -2528,7 +2529,6 @@ static int __init espserial_init(void)
init_waitqueue_head(&info->close_wait);
init_waitqueue_head(&info->delta_msr_wait);
init_waitqueue_head(&info->break_wait);
- spin_lock_init(&info->lock);
ports = info;
printk(KERN_INFO "ttyP%d at 0x%04x (irq = %d) is an ESP ",
info->line, info->port, info->irq);
diff --git a/drivers/char/rio/brates.h b/drivers/char/rio/brates.h
deleted file mode 100644
index dd686d58fd66..000000000000
--- a/drivers/char/rio/brates.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/****************************************************************************
- ******* *******
- ******* BRATES.H *******
- ******* *******
- ****************************************************************************
-
- Author : Jeremy Rolls
- Date : 1 Nov 1990
-
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Version : 0.01
-
-
- Mods
- ----------------------------------------------------------------------------
- Date By Description
- ----------------------------------------------------------------------------
-
- ***************************************************************************/
-
-#ifndef _brates_h
-#ifndef lint
-/* static char * _brates_h_sccs = "@(#)brates.h 1.4"; */
-#endif
-#define _brates_h 1
-/* List of baud rate defines. Most are borrowed from /usr/include/sys/termio.h
-*/
-#ifndef INKERNEL
-
-#define B0 0x00
-#define B50 0x01
-#define B75 0x02
-#define B110 0x03
-#define B134 0x04
-#define B150 0x05
-#define B200 0x06
-#define B300 0x07
-#define B600 0x08
-#define B1200 0x09
-#define B1800 0x0a
-#define B2400 0x0b
-#define B4800 0x0c
-#define B9600 0x0d
-#define B19200 0x0e
-#define B38400 0x0f
-
-#endif
-
-/*
-** The following baudrates may or may not be defined
-** on various UNIX systems.
-** If they are not then we define them.
-** If they are then we do not define them ;-)
-**
-** This is appalling that we use same definitions as UNIX
-** for our own download code as there is no garuntee that
-** B57600 will be defined as 0x11 by a UNIX system....
-** Arghhhhh!!!!!!!!!!!!!!
-*/
-#if !defined(B56000)
-#define B56000 0x10
-#endif
-
-#if !defined(B57600)
-#define B57600 0x11
-#endif
-
-#if !defined(B64000)
-#define B64000 0x12
-#endif
-
-#if !defined(B115200)
-#define B115200 0x13
-#endif
-
-
-#if !defined(B2000)
-#define B2000 0x14
-#endif
-
-
-#define MAX_RATE B2000
-
-struct baud_rate { /* Tag for baud rates */
- /* short host_rate, *//* As passed by the driver */
- short divisor, /* The divisor */
- prescaler; /* The pre-scaler */
-};
-
-#endif
diff --git a/drivers/char/rio/chan.h b/drivers/char/rio/chan.h
deleted file mode 100644
index af14311f9b66..000000000000
--- a/drivers/char/rio/chan.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-#ifndef _chan_h
-#define _chan_h
-
-#ifndef lint
-#ifdef SCCS
-static char *_rio_chan_h_sccs = "@(#)chan.h 1.1";
-#endif
-#endif
-
-#define Link0 0
-#define Link1 1
-#define Link2 2
-#define Link3 3
-
-#endif
diff --git a/drivers/char/rio/cmd.h b/drivers/char/rio/cmd.h
deleted file mode 100644
index 797b62400c91..000000000000
--- a/drivers/char/rio/cmd.h
+++ /dev/null
@@ -1,83 +0,0 @@
-
-
-/****************************************************************************
- ******* *******
- ******* C O M M A N D P A C K E T H E A D E R S
- ******* *******
- ****************************************************************************
-
- Author : Ian Nandhra
- Date :
-
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Version : 0.01
-
-
- Mods
- ----------------------------------------------------------------------------
- Date By Description
- ----------------------------------------------------------------------------
-
- ***************************************************************************/
-
-
-#ifndef _cmd_h
-#define _cmd_h
-
-#ifndef lint
-#ifdef SCCS
-static char *_rio_cmd_h_sccs = "@(#)cmd.h 1.1";
-#endif
-#endif
-
-
-#define PRE_EMPTIVE_CMD 0x80
-#define INLINE_CMD ~PRE_EMPTIVE_CMD
-
-#define CMD_IGNORE_PKT ( (ushort) 0)
-#define CMD_STATUS_REQ ( (ushort) 1)
-#define CMD_UNIT_STATUS_REQ ( (ushort) 2) /* Is this needed ??? */
-#define CMD_CONF_PORT ( (ushort) 3)
-#define CMD_CONF_UNIT ( (ushort) 4)
-#define CMD_ROUTE_MAP_REQ ( (ushort) 5)
-#define CMD_FLUSH_TX ( (ushort) 6)
-#define CMD_FLUSH_RX ( (ushort) 7)
-#define CMD_PARTION_PORT ( (ushort) 8)
-#define CMD_RESET_PORT ( (ushort) 0x0a)
-#define CMD_BOOT_UNIT ( (ushort) 0x0b)
-#define CMD_FOUND_UNIT ( (ushort) 0x0c)
-#define CMD_ATTACHED_RTA_2 ( (ushort) 0x0d)
-#define CMD_PROVIDE_BOOT ( (ushort) 0x0e)
-#define CMD_CIRRUS ( (ushort) 0x0f)
-
-#define FORM_STATUS_PKT ( (ushort) 1 )
-#define FORM_POLL_PKT ( (ushort) 2 )
-#define FORM_LINK_STATUS_PKT ( (ushort) 3 )
-
-
-#define CMD_DATA_PORT ( (ushort) 1 )
-#define CMD_DATA ( (ushort) 2 )
-
-#define CMD_TX_PART ( (ushort) 2 )
-#define CMD_RX_PART ( (ushort) 3 )
-#define CMD_RX_LIMIT ( (ushort) 4 )
-
-#endif
-
-/*********** end of file ***********/
diff --git a/drivers/char/rio/data.h b/drivers/char/rio/data.h
deleted file mode 100644
index dabc2d1fa40f..000000000000
--- a/drivers/char/rio/data.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : data.h
-** SID : 1.2
-** Last Modified : 11/6/98 11:34:09
-** Retrieved : 11/6/98 11:34:21
-**
-** ident @(#)data.h 1.2
-**
-** -----------------------------------------------------------------------------
-*/
-
-#ifndef __rio_datadex__
-#define __rio_datadex__
-
-#ifndef lint
-static char *_data_h_sccs_ = "@(#)data.h 1.2";
-#endif
-
-#endif
diff --git a/drivers/char/rio/debug.h b/drivers/char/rio/debug.h
deleted file mode 100644
index 6ae95c00db4a..000000000000
--- a/drivers/char/rio/debug.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
-** File: debug.h
-**
-** Author: David Dix
-**
-** Created: 12th March 1993
-**
-** Last modified: 93/04/27
-**
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef _debug_h_
-#define _debug_h_
-
-
-#if defined(DCIRRUS)
-#define DBPACKET(pkt, opt, str, chn) debug_packet((pkt), (opt), (str), (chn))
-#else
-#define DBPACKET(pkt, opt, str, c)
-#endif /* DCIRRUS */
-
-
-#endif /* _debug_h_ */
diff --git a/drivers/char/rio/eisa.h b/drivers/char/rio/eisa.h
deleted file mode 100644
index c2abaf0eab04..000000000000
--- a/drivers/char/rio/eisa.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
-
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : eisa.h
-** SID : 1.2
-** Last Modified : 11/6/98 11:34:10
-** Retrieved : 11/6/98 11:34:21
-**
-** ident @(#)eisa.h 1.2
-**
-** -----------------------------------------------------------------------------
-*/
-
-#ifndef __rio_eisa_h__
-#define __rio_eisa_h__
-
-#ifdef SCCS_LABELS
-#ifndef lint
-static char *_eisa_h_sccs_ = "@(#)eisa.h 1.2";
-#endif
-#endif
-
-/*
-** things to do with the EISA bus
-*/
-
-#define RIO_EISA_STRING_ADDRESS 0xfffd9 /* where EISA is stored */
-
-#define RIO_MAX_EISA_SLOTS 16 /* how many EISA slots? */
-
-#define RIO_EISA_IDENT 0x984D /* Specialix */
-#define RIO_EISA_PRODUCT_CODE 0x14 /* Code 14 */
-#define RIO_EISA_ENABLE_BIT 0x01 /* To enable card */
-
-#define EISA_MEMORY_BASE_LO 0xC00 /* A16-A23 */
-#define EISA_MEMORY_BASE_HI 0xC01 /* A24-A31 */
-#define EISA_INTERRUPT_VEC 0xC02 /* see below */
-#define EISA_CONTROL_PORT 0xC02 /* see below */
-#define EISA_INTERRUPT_RESET 0xC03 /* read to clear IRQ */
-
-#define EISA_PRODUCT_IDENT_LO 0xC80 /* where RIO_EISA_IDENT is */
-#define EISA_PRODUCT_IDENT_HI 0xC81
-#define EISA_PRODUCT_NUMBER 0xC82 /* where PROD_CODE is */
-#define EISA_REVISION_NUMBER 0xC83 /* revision (1dp) */
-#define EISA_ENABLE 0xC84 /* set LSB to enable card */
-#define EISA_UNIQUE_NUM_0 0xC88 /* vomit */
-#define EISA_UNIQUE_NUM_1 0xC8A
-#define EISA_UNIQUE_NUM_2 0xC90 /* bit strangely arranged */
-#define EISA_UNIQUE_NUM_3 0xC92
-#define EISA_MANUF_YEAR 0xC98 /* when */
-#define EISA_MANUF_WEEK 0xC9A /* more when */
-
-#define EISA_TP_BOOT_FROM_RAM 0x01
-#define EISA_TP_BOOT_FROM_LINK 0x00
-#define EISA_TP_FAST_LINKS 0x02
-#define EISA_TP_SLOW_LINKS 0x00
-#define EISA_TP_BUS_ENABLE 0x04
-#define EISA_TP_BUS_DISABLE 0x00
-#define EISA_TP_RUN 0x08
-#define EISA_TP_RESET 0x00
-#define EISA_POLLED 0x00
-#define EISA_IRQ_3 0x30
-#define EISA_IRQ_4 0x40
-#define EISA_IRQ_5 0x50
-#define EISA_IRQ_6 0x60
-#define EISA_IRQ_7 0x70
-#define EISA_IRQ_9 0x90
-#define EISA_IRQ_10 0xA0
-#define EISA_IRQ_11 0xB0
-#define EISA_IRQ_12 0xC0
-#define EISA_IRQ_14 0xE0
-#define EISA_IRQ_15 0xF0
-
-#define EISA_INTERRUPT_MASK 0xF0
-#define EISA_CONTROL_MASK 0x0F
-
-#define RIO_EISA_DEFAULT_MODE EISA_TP_SLOW_LINKS
-
-#define RIOEisaToIvec(X) (uchar )((uchar)((X) & EISA_INTERRUPT_MASK)>>4)
-
-#define INBZ(z,x) inb(((z)<<12) | (x))
-#define OUTBZ(z,x,y) outb((((z)<<12) | (x)), y)
-
-#endif /* __rio_eisa_h__ */
diff --git a/drivers/char/rio/enable.h b/drivers/char/rio/enable.h
deleted file mode 100644
index e06673fa48cf..000000000000
--- a/drivers/char/rio/enable.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/****************************************************************************
- ******* *******
- ******* E N A B L E H E A D E R S
- ******* *******
- ****************************************************************************
-
- Author : Ian Nandhra
- Date :
-
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Version : 0.01
-
-
- Mods
- ----------------------------------------------------------------------------
- Date By Description
- ----------------------------------------------------------------------------
-
- ***************************************************************************/
-
-#ifndef lint
-#ifdef SCCS
-static char *_rio_enable_h_sccs = "@(#)enable.h 1.1";
-#endif
-#endif
-
-
-#define ENABLE_LTT TRUE
-#define ENABLE_LRT TRUE
-
-
-/*********** end of file ***********/
diff --git a/drivers/char/rio/formpkt.h b/drivers/char/rio/formpkt.h
deleted file mode 100644
index 3c7c91ace3ee..000000000000
--- a/drivers/char/rio/formpkt.h
+++ /dev/null
@@ -1,153 +0,0 @@
-
-
-/****************************************************************************
- ******* *******
- ******* F O R M P A C K E T H E A D E R F I L E
- ******* *******
- ****************************************************************************
-
- Author : Ian Nandhra
- Date :
-
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Version : 0.01
-
-
- Mods
- ----------------------------------------------------------------------------
- Date By Description
- ----------------------------------------------------------------------------
-
- ***************************************************************************/
-
-#ifndef _formpkt_h
-#define _formpkt_h 1
-
-#ifndef lint
-#ifdef SCCS
-static char *_rio_formpkt_h_sccs = "@(#)formpkt.h 1.1";
-#endif
-#endif
-
-typedef struct FORM_BOOT_PKT_1 FORM_BOOT_PKT_1;
-struct FORM_BOOT_PKT_1 {
- ushort pkt_number;
- ushort pkt_total;
- ushort boot_top;
-};
-
-typedef struct FORM_BOOT_PKT_2 FORM_BOOT_PKT_2;
-struct FORM_BOOT_PKT_2 {
- ushort pkt_number;
- char boot_data[10];
-};
-
-
-typedef struct FORM_ATTACH_RTA FORM_ATTACH_RTA;
-struct FORM_ATTACH_RTA {
- char cmd_code;
- char booter_serial[4];
- char booter_link;
- char bootee_serial[4];
- char bootee_link;
-};
-
-
-typedef struct FORM_BOOT_ID FORM_BOOT_ID;
-struct FORM_BOOT_ID {
- char cmd_code;
- char bootee_serial[4];
- char bootee_prod_id;
- char bootee_link;
-};
-
-
-
-typedef struct FORM_ROUTE_1 FORM_ROUTE_1;
-struct FORM_ROUTE_1 {
- char cmd_code;
- char pkt_number;
- char total_in_sequence;
- char unit_id;
- char host_unit_id;
-};
-
-typedef struct FORM_ROUTE_2 FORM_ROUTE_2;
-struct FORM_ROUTE_2 {
- char cmd_code;
- char pkt_number;
- char total_in_sequence;
- char route_data[9];
-};
-
-typedef struct FORM_ROUTE_REQ FORM_ROUTE_REQ;
-struct FORM_ROUTE_REQ {
- char cmd_code;
- char pkt_number;
- char total_in_sequence;
- char route_data[10];
-};
-
-
-typedef struct FORM_ERROR FORM_ERROR;
-struct FORM_ERROR {
- char cmd_code;
- char error_code;
-
-};
-
-typedef struct FORM_STATUS FORM_STATUS;
-struct FORM_STATUS {
- char cmd_code;
- char status_code;
- char last_packet_valid;
- char tx_buffer;
- char rx_buffer;
- char port_status;
- char phb_status;
-};
-
-
-typedef struct FORM_LINK_STATUS FORM_LINK_STATUS;
-struct FORM_LINK_STATUS {
- char cmd_code;
- char status_code;
- char link_number;
- ushort rx_errors;
- ushort tx_errors;
- ushort csum_errors;
- ushort disconnects;
-};
-
-
-
-typedef struct FORM_PARTITION FORM_PARTITION;
-struct FORM_PARTITION {
- char cmd_code;
- char status_code;
- char port_number;
- char tx_max;
- char rx_max;
- char rx_limit;
-};
-
-
-#endif
-
-/*********** end of file ***********/
diff --git a/drivers/char/rio/hosthw.h b/drivers/char/rio/hosthw.h
deleted file mode 100644
index 6281fe47f4e9..000000000000
--- a/drivers/char/rio/hosthw.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/****************************************************************************
- ******* *******
- ******* H O S T H A R D W A R E
- ******* *******
- ****************************************************************************
-
- Author : Ian Nandhra / Jeremy Rolls
- Date :
-
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Version : 0.01
-
-
- Mods
- ----------------------------------------------------------------------------
- Date By Description
- ----------------------------------------------------------------------------
-
- ***************************************************************************/
-
-
-#ifndef lint
-#ifdef SCCS_LABELS
-static char *_rio_hosthw_h_sccs = "@(#)hosthw.h 1.2";
-#endif
-#endif
-
-#define SET_OTHER_INTERRUPT ( (volatile u_short *) 0x7c80 )
-#define SET_EISA_INTERRUPT ( (volatile u_short *) 0x7ef0 )
-
-#define EISA_HOST 0x30
-#define AT_HOST 0xa0
-#define MCA_HOST 0xb0
-#define PCI_HOST 0xd0
-
-#define PRODUCT_MASK 0xf0
-
-
-/*********** end of file ***********/
diff --git a/drivers/char/rio/lrt.h b/drivers/char/rio/lrt.h
deleted file mode 100644
index b41764d7a22a..000000000000
--- a/drivers/char/rio/lrt.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/****************************************************************************
- ******* *******
- ******* L R T
- ******* *******
- ****************************************************************************
-
- Author : Ian Nandhra / Jeremy Rolls
- Date :
-
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Version : 0.01
-
-
- Mods
- ----------------------------------------------------------------------------
- Date By Description
- ----------------------------------------------------------------------------
-
- ***************************************************************************/
-
-#ifndef lint
-#ifdef SCCS_LABELS
-static char *_rio_lrt_h_sccs = "@(#)lrt.h 1.1";
-#endif
-#endif
-
-
-#ifdef DCIRRUS
-#define LRT_STACK (unsigned short) 600
-#else
-#define LRT_STACK (ushort) 200
-#endif
-
-
-
-/*********** end of file ***********/
diff --git a/drivers/char/rio/ltt.h b/drivers/char/rio/ltt.h
deleted file mode 100644
index ab04004d4048..000000000000
--- a/drivers/char/rio/ltt.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/****************************************************************************
- ******* *******
- ******* L T T
- ******* *******
- ****************************************************************************
-
- Author : Ian Nandhra / Jeremy Rolls
- Date :
-
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Version : 0.01
-
-
- Mods
- ----------------------------------------------------------------------------
- Date By Description
- ----------------------------------------------------------------------------
-
- ***************************************************************************/
-
-#ifndef lint
-#ifdef SCCS_LABELS
-static char *_rio_ltt_h_sccs = "@(#)ltt.h 1.1";
-#endif
-#endif
-
-#ifdef DCIRRUS
-#define LTT_STACK (unsigned short) 600
-#else
-#define LTT_STACK (ushort) 200
-#endif
-
-
-
-
-/*********** end of file ***********/
diff --git a/drivers/char/rio/lttwake.h b/drivers/char/rio/lttwake.h
deleted file mode 100644
index fdf0c1f250ab..000000000000
--- a/drivers/char/rio/lttwake.h
+++ /dev/null
@@ -1,50 +0,0 @@
-
-
-
-/****************************************************************************
- ******* *******
- ******* L T T W A K E U P H E A D E R
- ******* *******
- ****************************************************************************
-
- Author : Ian Nandhra
- Date :
-
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Version : 0.01
-
-
- Mods
- ----------------------------------------------------------------------------
- Date By Description
- ----------------------------------------------------------------------------
-
- ***************************************************************************/
-
-#ifndef lint
-#ifdef SCCS_LABELS
-static char *_rio_lttwake_h_sccs = "@(#)lttwake.h 1.1";
-#endif
-#endif
-
-#define LTT_WAKEUP_STACK 500
-#define LTT_WAKEUP_INTERVAL (int) (500 * MILLISECOND)
-
-
-/*********** end of file ***********/
diff --git a/drivers/char/rio/mca.h b/drivers/char/rio/mca.h
deleted file mode 100644
index d01e76be7a17..000000000000
--- a/drivers/char/rio/mca.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : mca.h
-** SID : 1.2
-** Last Modified : 11/6/98 11:34:11
-** Retrieved : 11/6/98 11:34:21
-**
-** ident @(#)mca.h 1.2
-**
-** -----------------------------------------------------------------------------
-*/
-
-#ifndef __rio_mca_h__
-#define __rio_mca_h__
-
-#ifdef SCCS_LABELS
-static char *_mca_h_sccs_ = "@(#)mca.h 1.2";
-#endif
-
-/*
-** Micro Channel stuff
-*/
-
-#define McaMaxSlots 8
-#define McaSlotSelect 0x96
-#define McaSlotEnable 0x08
-#define McaIdLow 0x100
-#define McaIdHigh 0x101
-#define McaIrqEnable 0x102
-#define McaMemory 0x103
-#define McaRIOId 0x6a5c
-#define McaIrq9 0x00
-#define McaIrq3 0x02
-#define McaIrq4 0x04
-#define McaIrq7 0x06
-#define McaIrq10 0x08
-#define McaIrq11 0x0A
-#define McaIrq12 0x0C
-#define McaIrq15 0x0E
-#define McaIrqMask 0x0E
-#define McaCardEnable 0x01
-#define McaAddress(X) (((X)&0xFF)<<16)
-
-#define McaTpFastLinks 0x40
-#define McaTpSlowLinks 0x00
-#define McaTpBootFromRam 0x01
-#define McaTpBootFromLink 0x00
-#define McaTpBusEnable 0x02
-#define McaTpBusDisable 0x00
-
-#define RIO_MCA_DEFAULT_MODE SLOW_LINKS
-
-#endif /* __rio_mca_h__ */
diff --git a/drivers/char/rio/mesg.h b/drivers/char/rio/mesg.h
deleted file mode 100644
index dd9be586ec6f..000000000000
--- a/drivers/char/rio/mesg.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : mesg.h
-** SID : 1.2
-** Last Modified : 11/6/98 11:34:12
-** Retrieved : 11/6/98 11:34:21
-**
-** ident @(#)mesg.h 1.2
-**
-** -----------------------------------------------------------------------------
-*/
-
-#ifndef __rio_mesg_h__
-#define __rio_mesg_h__
-
-#ifdef SCCS_LABELS
-static char *_mesg_h_sccs_ = "@(#)mesg.h 1.2";
-#endif
-
-
-#endif /* __rio_mesg_h__ */
diff --git a/drivers/char/rio/poll.h b/drivers/char/rio/poll.h
deleted file mode 100644
index 9616ee4c6cd5..000000000000
--- a/drivers/char/rio/poll.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/****************************************************************************
- ******* *******
- ******* P O L L
- ******* *******
- ****************************************************************************
-
- Author : Ian Nandhra / Jeremy Rolls
- Date :
-
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Version : 0.01
-
-
- Mods
- ----------------------------------------------------------------------------
- Date By Description
- ----------------------------------------------------------------------------
-
- ***************************************************************************/
-
-#ifndef _poll_h
-#define _poll_h
-
-#ifndef lint
-#ifdef SCCS_LABELS
-static char *_rio_poll_h_sccs = "@(#)poll.h 1.2";
-#endif
-#endif
-
-
-#ifdef HOST
-#define POLL_STACK 100
-#endif
-#ifdef RTA
-#define POLL_STACK 200
-#endif
-
-#define POLL_PERIOD (int) SECOND
-
-/* The various poll commands */
-#define POLL_POLL 0 /* We are connected and happy.. */
-#define POLL_INTRO 1 /* Introduction packet */
-#define POLL_TOPOLOGY 2 /* Topology update */
-#define POLL_ASSIGN 3 /* ID assign */
-#define POLL_FOAD 4 /* F*** Off And Die */
-#define POLL_LMD 5 /* Let Me Die */
-#define POLL_DYB 6 /* Die You Ba***** */
-
-/* The way data fields are split up for POLL packets */
-#define POLL_HOST_SERIAL 2 /* Host who booted me */
-#define POLL_MY_SERIAL 6 /* My serial number */
-#define POLL_YOUR_ID 1 /* Your ID number */
-#define POLL_TOPOLOGY_FIELDS 2 /* Topology maps */
-
-#endif
-
-/*********** end of file ***********/
diff --git a/drivers/char/rio/proto.h b/drivers/char/rio/proto.h
deleted file mode 100644
index f9a3376333e5..000000000000
--- a/drivers/char/rio/proto.h
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef _prototypes_h
-#define _prototypes_h
-
-
-/*
-** boot.c
-*/
-void init_boot(char *p, short stage);
-
-/*
-** disconct.c
-*/
-void kill_boot(LPB * link);
-void disconnected(LPB * link);
-short boot_3(LPB * link, PKT * pkt);
-short send_3_pkt(LPB * link, PKT * pkt);
-
-/*
-** error.c
-*/
-void du_error(void);
-
-/*
-** formpkt.c
-*/
-ushort sum_it(PKT * pkt);
-void form_rup_pkt(RUP * form_rup, PKT * pkt);
-void form_poll_pkt(int type, LPB * link, int node);
-void form_route_pkt(int type, PKT * pkt, LPB * link);
-
-/*
-** idle.c
-*/
-void idle(Process * idle_p);
-
-/*
-** init.c
-*/
-void general_init(void);
-void mem_halt(int error);
-
-/*
-** linkinit.c
-*/
-void initlink(u_short number, LPB * link);
-void runlink(LPB * link);
-
-/*
-** list.c
-*/
-PKT *get_free_start(void);
-void put_free_start(PKT * pkt);
-
-#ifdef HOST
-int can_remove_transmit(PKT ** pkt, PKT * pointer);
-#endif
-
-#ifdef RTA
-int spl7(void);
-int spl0(void);
-Q_BUF *get_free_q(void);
-PKT *get_free_end(void);
-int add_end(PKT * pkt, PHB * phb, int type);
-unsigned short free_packets(PHB * phb, int type);
-int can_remove_start(PKT ** pkt, PHB * phb, int type);
-int can_add_start(PHB * phb, int type);
-int can_add_end(PHB * phb, int type);
-void put_free_end(PKT * pkt);
-int remove_start(PKT ** pkt, PHB * phb, int type);
-#endif
-
-/*
-** Lrt.c
-*/
-void lrt(Process * lrt_p, LPB * link);
-
-#ifdef RTA
-void set_led_red(LPB * link);
-#endif
-
-/*
-** ltt.c
-*/
-void ltt(Process * ltt_p, LPB * link, PHB * phb_ptr[]);
-void send_poll(LPB * link);
-void request_id(LPB * link);
-void send_topology_update(LPB * link);
-void send_topology(LPB * link);
-void supply_id(LPB * link);
-
-#ifdef RTA
-void redirect_queue(LPB * link, ushort flush);
-int obtain_rup(int rup_number, PKT ** pkt_address, LPB * link);
-#endif
-
-#ifdef TESTING_PERF
-int consume_cpu(void);
-#endif
-
-/*
-** lttwake.c
-*/
-#ifdef HOST
-void ltt_wakeup(Process * ltt_wakeup_p);
-#endif
-
-/*
-** mapgen.c
-*/
-void generate_id_map(short mapping, ROUTE_STR route[]);
-void gen_map(int mapping, int looking_at, int come_from, ROUTE_STR route[], int link, int *ttl);
-void adjust_ttl(int mapping, int looking_at, int come_from, ROUTE_STR route[], int link, int *ttl);
-void init_sys_map(void);
-
-/*
-** mmu.c
-*/
-char *rio_malloc(unsigned int amount);
-char *rio_calloc(unsigned int num, unsigned int size);
-ERROR rio_mmu_init(uint total_mem);
-
-/*
-** partn.c
-*/
-void partition_tx(struct PHB *phb, u_short tx_size, u_short rx_size, u_short rx_limit);
-
-/*
-** poll.c
-*/
-void tx_poll(Process * tx_poll_p);
-
-/*
-** process.c
-*/
-int get_proc_space(Process ** pd, int **pws, int wssize);
-
-/*
-** readrom.c
-*/
-void read_serial_number(char *buf);
-
-/*
-** rio.c
-*/
-int main(void);
-
-/*
-** route.c
-*/
-void route_update(PKT * pkt, LPB * link);
-
-/*
-** rtainit.c
-*/
-#if defined(RTA)
-void rta_init(ushort RtaType);
-#endif /* defined(RTA) */
-
-/*
-** rupboot.c
-*/
-void rup_boot(PKT * pkt, RUP * this_rup, LPB * link);
-
-#ifdef RTA
-void kill_your_neighbour(int link_to_kill);
-#endif
-
-/*
-** rupcmd.c
-*/
-void rup_command(PKT * pkt, struct RUP *this_rup, LPB * link);
-
-/*
-** ruperr.c
-*/
-void rup_error(PKT * pkt, RUP * this_rup, LPB * link);
-void illegal_cmd(PKT * src_pkt);
-
-/*
-** ruppoll.c
-*/
-void rup_poll(PKT * pkt, RUP * this_rup, LPB * link);
-
-/*
-** ruppower.c
-*/
-void rup_power(PKT * pkt, RUP * this_rup, LPB * link);
-
-/*
-** ruprm.c
-*/
-void rup_route_map(PKT * pkt, RUP * this_rup, LPB * link);
-
-/*
-** rupstat.c
-*/
-void rup_status(PKT * pkt, RUP * this_rup, LPB * link);
-
-/*
-** rupsync.c
-*/
-void rup_sync(PKT * pkt);
-
-/*
-** rxpkt.c
-*/
-ERROR rx_pkt(PKT_ptr_ptr pkt_address, LPB * link);
-
-/*
-** sendsts.c
-*/
-void send_status(PKT * requesting_pkt, RUP * this_rup);
-
-/*
-** serial.c
-*/
-void assign_serial(char *ser_in, char *ser_out);
-int cmp_serial(char *ser_1, char *ser_2);
-
-/*
-** txpkt.c
-*/
-ERROR tx_pkt(PKT * pkt, LPB * link);
-short send_sync(LPB * link);
-
-#endif /* _prototypes_h */
diff --git a/drivers/char/rio/rio_linux.c b/drivers/char/rio/rio_linux.c
index 8825bd61b7d0..c9af283a811d 100644
--- a/drivers/char/rio/rio_linux.c
+++ b/drivers/char/rio/rio_linux.c
@@ -132,16 +132,6 @@ more than 512 ports.... */
*/
#define IRQ_RATE_LIMIT 200
-#if 0
-/* Not implemented */
-/*
- * The following defines are mostly for testing purposes. But if you need
- * some nice reporting in your syslog, you can define them also.
- */
-#define RIO_REPORT_FIFO
-#define RIO_REPORT_OVERRUN
-#endif
-
/* These constants are derived from SCO Source */
static struct Conf
@@ -573,21 +563,6 @@ static void rio_shutdown_port(void *ptr)
PortP = (struct Port *) ptr;
PortP->gs.tty = NULL;
-#if 0
- port->gs.flags &= ~GS_ACTIVE;
- if (!port->gs.tty) {
- rio_dprintk(RIO_DBUG_TTY, "No tty.\n");
- return;
- }
- if (!port->gs.tty->termios) {
- rio_dprintk(RIO_DEBUG_TTY, "No termios.\n");
- return;
- }
- if (port->gs.tty->termios->c_cflag & HUPCL) {
- rio_setsignals(port, 0, 0);
- }
-#endif
-
func_exit();
}
@@ -663,11 +638,6 @@ static int rio_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd
rc = 0;
switch (cmd) {
-#if 0
- case TIOCGSOFTCAR:
- rc = put_user(((tty->termios->c_cflag & CLOCAL) ? 1 : 0), (unsigned int *) arg);
- break;
-#endif
case TIOCSSOFTCAR:
if ((rc = get_user(ival, (unsigned int *) arg)) == 0) {
tty->termios->c_cflag = (tty->termios->c_cflag & ~CLOCAL) | (ival ? CLOCAL : 0);
@@ -709,36 +679,6 @@ static int rio_ioctl(struct tty_struct *tty, struct file *filp, unsigned int cmd
if (access_ok(VERIFY_READ, (void *) arg, sizeof(struct serial_struct)))
rc = gs_setserial(&PortP->gs, (struct serial_struct *) arg);
break;
-#if 0
- /*
- * note: these IOCTLs no longer reach here. Use
- * tiocmset/tiocmget driver methods instead. The
- * #if 0 disablement predates this comment.
- */
- case TIOCMGET:
- rc = -EFAULT;
- if (access_ok(VERIFY_WRITE, (void *) arg, sizeof(unsigned int))) {
- rc = 0;
- ival = rio_getsignals(port);
- put_user(ival, (unsigned int *) arg);
- }
- break;
- case TIOCMBIS:
- if ((rc = get_user(ival, (unsigned int *) arg)) == 0) {
- rio_setsignals(port, ((ival & TIOCM_DTR) ? 1 : -1), ((ival & TIOCM_RTS) ? 1 : -1));
- }
- break;
- case TIOCMBIC:
- if ((rc = get_user(ival, (unsigned int *) arg)) == 0) {
- rio_setsignals(port, ((ival & TIOCM_DTR) ? 0 : -1), ((ival & TIOCM_RTS) ? 0 : -1));
- }
- break;
- case TIOCMSET:
- if ((rc = get_user(ival, (unsigned int *) arg)) == 0) {
- rio_setsignals(port, ((ival & TIOCM_DTR) ? 1 : 0), ((ival & TIOCM_RTS) ? 1 : 0));
- }
- break;
-#endif
default:
rc = -ENOIOCTLCMD;
break;
diff --git a/drivers/char/rio/rioboot.c b/drivers/char/rio/rioboot.c
index 34cbb13aad4b..92df43552f15 100644
--- a/drivers/char/rio/rioboot.c
+++ b/drivers/char/rio/rioboot.c
@@ -665,13 +665,6 @@ struct PKT *PacketP;
struct CmdBlk *CmdBlkP;
uint sequence;
-#ifdef CHECK
- CheckHost(Host);
- CheckRup(Rup);
- CheckHostP(HostP);
- CheckPacketP(PacketP);
-#endif
-
/*
** If we haven't been told what to boot, we can't boot it.
*/
@@ -956,11 +949,6 @@ static int RIOBootComplete( struct rio_info *p, struct Host *HostP, uint Rup, st
MyType = "RTA";
MyName = HostP->Mapping[Rup].Name;
}
-#ifdef CHECK
- CheckString(MyType);
- CheckString(MyName);
-#endif
-
MyLink = RBYTE(PktCmdP->LinkNum);
/*
@@ -1309,52 +1297,3 @@ struct Host *HostP;
}
}
-#if 0
-/*
- Function: This function is to disable the disk interrupt
- Returns : Nothing
-*/
-void
-disable_interrupt(vector)
-int vector;
-{
- int ps;
- int val;
-
- disable(ps);
- if (vector > 40) {
- val = 1 << (vector - 40);
- __outb(S8259+1, __inb(S8259+1) | val);
- }
- else {
- val = 1 << (vector - 32);
- __outb(M8259+1, __inb(M8259+1) | val);
- }
- restore(ps);
-}
-
-/*
- Function: This function is to enable the disk interrupt
- Returns : Nothing
-*/
-void
-enable_interrupt(vector)
-int vector;
-{
- int ps;
- int val;
-
- disable(ps);
- if (vector > 40) {
- val = 1 << (vector - 40);
- val = ~val;
- __outb(S8259+1, __inb(S8259+1) & val);
- }
- else {
- val = 1 << (vector - 32);
- val = ~val;
- __outb(M8259+1, __inb(M8259+1) & val);
- }
- restore(ps);
-}
-#endif
diff --git a/drivers/char/rio/riocmd.c b/drivers/char/rio/riocmd.c
index b97dd9fdb6ba..694bfb9d9378 100644
--- a/drivers/char/rio/riocmd.c
+++ b/drivers/char/rio/riocmd.c
@@ -387,12 +387,6 @@ static int RIOCommandRup(struct rio_info *p, uint Rup, struct Host *HostP, PKT *
func_enter();
-#ifdef CHECK
- CheckHost(Host);
- CheckHostP(HostP);
- CheckPacketP(PacketP);
-#endif
-
/*
** 16 port RTA note:
** Command rup packets coming from the RTA will have pkt->data[1] (which
@@ -406,10 +400,6 @@ static int RIOCommandRup(struct rio_info *p, uint Rup, struct Host *HostP, PKT *
SysPort = UnixRupP->BaseSysPort + (RBYTE(PktCmdP->PhbNum) % (ushort) PORTS_PER_RTA);
rio_dprintk(RIO_DEBUG_CMD, "Command on rup %d, port %d\n", rup, SysPort);
-#ifdef CHECK
- CheckRup(rup);
- CheckUnixRupP(UnixRupP);
-#endif
if (UnixRupP->BaseSysPort == NO_PORT) {
rio_dprintk(RIO_DEBUG_CMD, "OBSCURE ERROR!\n");
rio_dprintk(RIO_DEBUG_CMD, "Diagnostics follow. Please WRITE THESE DOWN and report them to Specialix Technical Support\n");
@@ -429,9 +419,6 @@ static int RIOCommandRup(struct rio_info *p, uint Rup, struct Host *HostP, PKT *
rio_dprintk(RIO_DEBUG_CMD, "COMMAND information: Host Port Number 0x%x, " "Command Code 0x%x\n", PktCmdP->PhbNum, PktCmdP->Command);
return TRUE;
}
-#ifdef CHECK
- CheckSysPort(SysPort);
-#endif
PortP = p->RIOPortp[SysPort];
rio_spin_lock_irqsave(&PortP->portSem, flags);
switch (RBYTE(PktCmdP->Command)) {
@@ -604,11 +591,6 @@ int RIOQueueCmdBlk(struct Host *HostP, uint Rup, struct CmdBlk *CmdBlkP)
struct UnixRup *UnixRupP;
unsigned long flags;
-#ifdef CHECK
- CheckHostP(HostP);
- CheckRup(Rup);
- CheckCmdBlkP(CmdBlkP);
-#endif
if (Rup >= (ushort) (MAX_RUP + LINKS_PER_UNIT)) {
rio_dprintk(RIO_DEBUG_CMD, "Illegal rup number %d in RIOQueueCmdBlk\n", Rup);
RIOFreeCmdBlk(CmdBlkP);
@@ -806,9 +788,6 @@ void RIOPollHostCommands(struct rio_info *p, struct Host *HostP)
** If it returns RIO_FAIL then don't
** send this command yet!
*/
-#ifdef CHECK
- CheckCmdBlkP(CmdBlkP);
-#endif
if (!(CmdBlkP->PreFuncP ? (*CmdBlkP->PreFuncP) (CmdBlkP->PreArg, CmdBlkP) : TRUE)) {
rio_dprintk(RIO_DEBUG_CMD, "Not ready to start command 0x%x\n", (int) CmdBlkP);
} else {
@@ -816,9 +795,6 @@ void RIOPollHostCommands(struct rio_info *p, struct Host *HostP)
/*
** Whammy! blat that pack!
*/
-#ifdef CHECK
- CheckPacketP((PKT *) RIO_PTR(HostP->Caddr, UnixRupP->RupP->txpkt));
-#endif
HostP->Copy((caddr_t) & CmdBlkP->Packet, RIO_PTR(HostP->Caddr, UnixRupP->RupP->txpkt), sizeof(PKT));
/*
@@ -852,9 +828,6 @@ int RIOWFlushMark(int iPortP, struct CmdBlk *CmdBlkP)
unsigned long flags;
rio_spin_lock_irqsave(&PortP->portSem, flags);
-#ifdef CHECK
- CheckPortP(PortP);
-#endif
PortP->WflushFlag++;
PortP->MagicFlags |= MAGIC_FLUSH;
rio_spin_unlock_irqrestore(&PortP->portSem, flags);
@@ -894,9 +867,6 @@ int RIOUnUse(int iPortP, struct CmdBlk *CmdBlkP)
rio_spin_lock_irqsave(&PortP->portSem, flags);
-#ifdef CHECK
- CheckPortP(PortP);
-#endif
rio_dprintk(RIO_DEBUG_CMD, "Decrement in use count for port\n");
if (PortP->InUse) {
diff --git a/drivers/char/rio/rioctrl.c b/drivers/char/rio/rioctrl.c
index 0b7700d2f049..fcf18a061228 100644
--- a/drivers/char/rio/rioctrl.c
+++ b/drivers/char/rio/rioctrl.c
@@ -308,12 +308,7 @@ int su;
}
case RIO_DEBUG_MEM:
-#ifdef DEBUG_MEM_SUPPORT
- RIO_DEBUG_CTRL, if (su)
- return rio_RIODebugMemory(RIO_DEBUG_CTRL, arg);
- else
-#endif
- return -EPERM;
+ return -EPERM;
case RIO_ALL_MODEM:
rio_dprintk(RIO_DEBUG_CTRL, "RIO_ALL_MODEM\n");
@@ -591,12 +586,7 @@ int su;
case RIO_GET_LOG:
rio_dprintk(RIO_DEBUG_CTRL, "RIO_GET_LOG\n");
-#ifdef LOGGING
- RIOGetLog(arg);
- return 0;
-#else
return -EINVAL;
-#endif
case RIO_GET_MODTYPE:
if (copyin((int) arg, (caddr_t) & port, sizeof(uint)) == COPYFAIL) {
@@ -684,52 +674,6 @@ int su;
rio_dprintk(RIO_DEBUG_CTRL, "entering loop (%d %d)!\n", PortSetup.From, PortSetup.To);
for (loop = PortSetup.From; loop <= PortSetup.To; loop++) {
rio_dprintk(RIO_DEBUG_CTRL, "in loop (%d)!\n", loop);
-#if 0
- PortP = p->RIOPortp[loop];
- if (!PortP->TtyP)
- PortP->TtyP = &p->channel[loop];
-
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- if (PortSetup.IxAny)
- PortP->Config |= RIO_IXANY;
- else
- PortP->Config &= ~RIO_IXANY;
- if (PortSetup.IxOn)
- PortP->Config |= RIO_IXON;
- else
- PortP->Config &= ~RIO_IXON;
-
- /*
- ** If the port needs to wait for all a processes output
- ** to drain before closing then this flag will be set.
- */
- if (PortSetup.Drain) {
- PortP->Config |= RIO_WAITDRAIN;
- } else {
- PortP->Config &= ~RIO_WAITDRAIN;
- }
- /*
- ** Store settings if locking or unlocking port or if the
- ** port is not locked, when setting the store option.
- */
- if (PortP->Mapped && ((PortSetup.Lock && !PortP->Lock) || (!PortP->Lock && (PortSetup.Store && !PortP->Store)))) {
- PortP->StoredTty.iflag = PortP->TtyP->tm.c_iflag;
- PortP->StoredTty.oflag = PortP->TtyP->tm.c_oflag;
- PortP->StoredTty.cflag = PortP->TtyP->tm.c_cflag;
- PortP->StoredTty.lflag = PortP->TtyP->tm.c_lflag;
- PortP->StoredTty.line = PortP->TtyP->tm.c_line;
- bcopy(PortP->TtyP->tm.c_cc, PortP->StoredTty.cc, NCC + 5);
- }
- PortP->Lock = PortSetup.Lock;
- PortP->Store = PortSetup.Store;
- PortP->Xprint.XpCps = PortSetup.XpCps;
- bcopy(PortSetup.XpOn, PortP->Xprint.XpOn, MAX_XP_CTRL_LEN);
- bcopy(PortSetup.XpOff, PortP->Xprint.XpOff, MAX_XP_CTRL_LEN);
- PortP->Xprint.XpOn[MAX_XP_CTRL_LEN - 1] = '\0';
- PortP->Xprint.XpOff[MAX_XP_CTRL_LEN - 1] = '\0';
- PortP->Xprint.XpLen = RIOStrlen(PortP->Xprint.XpOn) + RIOStrlen(PortP->Xprint.XpOff);
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
-#endif
}
rio_dprintk(RIO_DEBUG_CTRL, "after loop (%d)!\n", loop);
rio_dprintk(RIO_DEBUG_CTRL, "Retval:%x\n", retval);
@@ -801,12 +745,6 @@ int su;
rio_dprintk(RIO_DEBUG_CTRL, "Port %d\n", PortTty.port);
PortP = (p->RIOPortp[PortTty.port]);
-#if 0
- PortTty.Tty.tm.c_iflag = PortP->TtyP->tm.c_iflag;
- PortTty.Tty.tm.c_oflag = PortP->TtyP->tm.c_oflag;
- PortTty.Tty.tm.c_cflag = PortP->TtyP->tm.c_cflag;
- PortTty.Tty.tm.c_lflag = PortP->TtyP->tm.c_lflag;
-#endif
if (copyout((caddr_t) & PortTty, (int) arg, sizeof(struct PortTty)) == COPYFAIL) {
p->RIOError.Error = COPYOUT_FAILED;
return -EFAULT;
@@ -824,15 +762,6 @@ int su;
return -ENXIO;
}
PortP = (p->RIOPortp[PortTty.port]);
-#if 0
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- PortP->TtyP->tm.c_iflag = PortTty.Tty.tm.c_iflag;
- PortP->TtyP->tm.c_oflag = PortTty.Tty.tm.c_oflag;
- PortP->TtyP->tm.c_cflag = PortTty.Tty.tm.c_cflag;
- PortP->TtyP->tm.c_lflag = PortTty.Tty.tm.c_lflag;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
-#endif
-
RIOParam(PortP, CONFIG, PortP->State & RIO_MODEM, OK_TO_SLEEP);
return retval;
@@ -909,23 +838,6 @@ int su;
rio_spin_unlock_irqrestore(&PortP->portSem, flags);
return retval;
-#ifdef DEBUG_SUPPORTED
- case RIO_READ_LEVELS:
- {
- int num;
- rio_dprintk(RIO_DEBUG_CTRL, "RIO_READ_LEVELS\n");
- for (num = 0; RIODbInf[num].Flag; num++);
- rio_dprintk(RIO_DEBUG_CTRL, "%d levels to copy\n", num);
- if (copyout((caddr_t) RIODbInf, (int) arg, sizeof(struct DbInf) * (num + 1)) == COPYFAIL) {
- rio_dprintk(RIO_DEBUG_CTRL, "ReadLevels Copy failed\n");
- p->RIOError.Error = COPYOUT_FAILED;
- return -EFAULT;
- }
- rio_dprintk(RIO_DEBUG_CTRL, "%d levels to copied\n", num);
- return retval;
- }
-#endif
-
case RIO_READ_CONFIG:
rio_dprintk(RIO_DEBUG_CTRL, "RIO_READ_CONFIG\n");
if (copyout((caddr_t) & p->RIOConf, (int) arg, sizeof(struct Conf)) == COPYFAIL) {
@@ -1084,30 +996,13 @@ int su;
(void) RIOBoardTest(p->RIOHosts[Host].PaddrP, p->RIOHosts[Host].Caddr, p->RIOHosts[Host].Type, p->RIOHosts[Host].Slot);
bzero((caddr_t) & p->RIOHosts[Host].Flags, ((int) &p->RIOHosts[Host].____end_marker____) - ((int) &p->RIOHosts[Host].Flags));
p->RIOHosts[Host].Flags = RC_WAITING;
-#if 0
- RIOSetupDataStructs(p);
-#endif
}
RIOFoadWakeup(p);
p->RIONumBootPkts = 0;
p->RIOBooting = 0;
-
-#ifdef RINGBUFFER_SUPPORT
- for (loop = 0; loop < RIO_PORTS; loop++)
- if (p->RIOPortp[loop]->TxRingBuffer)
- sysfree((void *) p->RIOPortp[loop]->TxRingBuffer, RIOBufferSize);
-#endif
-#if 0
- bzero((caddr_t) & p->RIOPortp[0], RIO_PORTS * sizeof(struct Port));
-#else
printk("HEEEEELP!\n");
-#endif
for (loop = 0; loop < RIO_PORTS; loop++) {
-#if 0
- p->RIOPortp[loop]->TtyP = &p->channel[loop];
-#endif
-
spin_lock_init(&p->RIOPortp[loop]->portSem);
p->RIOPortp[loop]->InUse = NOT_INUSE;
}
@@ -1653,10 +1548,6 @@ uchar Cmd;
ushort rup;
int port;
-#ifdef CHECK
- CheckPortP(PortP);
-#endif
-
if (PortP->State & RIO_DELETED) {
rio_dprintk(RIO_DEBUG_CTRL, "Preemptive command to deleted RTA ignored\n");
return RIO_FAIL;
diff --git a/drivers/char/rio/rioinit.c b/drivers/char/rio/rioinit.c
index 898a126ae3e6..0d44ef464e6b 100644
--- a/drivers/char/rio/rioinit.c
+++ b/drivers/char/rio/rioinit.c
@@ -87,222 +87,8 @@ static char *_rioinit_c_sccs_ = "@(#)rioinit.c 1.3";
int RIOPCIinit(struct rio_info *p, int Mode);
-#if 0
-static void RIOAllocateInterrupts(struct rio_info *);
-static int RIOReport(struct rio_info *);
-static void RIOStopInterrupts(struct rio_info *, int, int);
-#endif
-
static int RIOScrub(int, BYTE *, int);
-#if 0
-extern int rio_intr();
-
-/*
-** Init time code.
-*/
-void
-rioinit( p, info )
-struct rio_info * p;
-struct RioHostInfo * info;
-{
- /*
- ** Multi-Host card support - taking the easy way out - sorry !
- ** We allocate and set up the Host and Port structs when the
- ** driver is called to 'install' the first host.
- ** We check for this first 'call' by testing the RIOPortp pointer.
- */
- if ( !p->RIOPortp )
- {
- rio_dprintk (RIO_DEBUG_INIT, "Allocating and setting up driver data structures\n");
-
- RIOAllocDataStructs(p); /* allocate host/port structs */
- RIOSetupDataStructs(p); /* setup topology structs */
- }
-
- RIOInitHosts( p, info ); /* hunt down the hardware */
-
- RIOAllocateInterrupts(p); /* allocate interrupts */
- RIOReport(p); /* show what we found */
-}
-
-/*
-** Initialise the Cards
-*/
-void
-RIOInitHosts(p, info)
-struct rio_info * p;
-struct RioHostInfo * info;
-{
-/*
-** 15.10.1998 ARG - ESIL 0762 part fix
-** If there is no ISA card definition - we always look for PCI cards.
-** As we currently only support one host card this lets an ISA card
-** definition take precedence over PLUG and PLAY.
-** No ISA card - we are PLUG and PLAY with PCI.
-*/
-
- /*
- ** Note - for PCI both these will be zero, that's okay because
- ** RIOPCIInit() fills them in if a card is found.
- */
- p->RIOHosts[p->RIONumHosts].Ivec = info->vector;
- p->RIOHosts[p->RIONumHosts].PaddrP = info->location;
-
- /*
- ** Check that we are able to accommodate another host
- */
- if ( p->RIONumHosts >= RIO_HOSTS )
- {
- p->RIOFailed++;
- return;
- }
-
- if ( info->bus & ISA_BUS )
- {
- rio_dprintk (RIO_DEBUG_INIT, "initialising card %d (ISA)\n", p->RIONumHosts);
- RIOISAinit(p, p->mode);
- }
- else
- {
- rio_dprintk (RIO_DEBUG_INIT, "initialising card %d (PCI)\n", p->RIONumHosts);
- RIOPCIinit(p, RIO_PCI_DEFAULT_MODE);
- }
-
- rio_dprintk (RIO_DEBUG_INIT, "Total hosts initialised so far : %d\n", p->RIONumHosts);
-
-
-#ifdef FUTURE_RELEASE
- if (p->bus & EISA_BUS)
- /* EISA card */
- RIOEISAinit(p, RIO_EISA_DEFAULT_MODE);
-
- if (p->bus & MCA_BUS)
- /* MCA card */
- RIOMCAinit(p, RIO_MCA_DEFAULT_MODE);
-#endif
-}
-
-/*
-** go through memory for an AT host that we pass in the device info
-** structure and initialise
-*/
-void
-RIOISAinit(p, mode)
-struct rio_info * p;
-int mode;
-{
-
- /* XXX Need to implement this. */
-#if 0
- p->intr_tid = iointset(p->RIOHosts[p->RIONumHosts].Ivec,
- (int (*)())rio_intr, (char*)p->RIONumHosts);
-
- rio_dprintk (RIO_DEBUG_INIT, "Set interrupt handler, intr_tid = 0x%x\n", p->intr_tid );
-
- if (RIODoAT(p, p->RIOHosts[p->RIONumHosts].PaddrP, mode)) {
- return;
- }
- else {
- rio_dprintk (RIO_DEBUG_INIT, "RIODoAT failed\n");
- p->RIOFailed++;
- }
-#endif
-
-}
-
-/*
-** RIODoAT :
-**
-** Map in a boards physical address, check that the board is there,
-** test the board and if everything is okay assign the board an entry
-** in the Rio Hosts structure.
-*/
-int
-RIODoAT(p, Base, mode)
-struct rio_info * p;
-int Base;
-int mode;
-{
-#define FOUND 1
-#define NOT_FOUND 0
-
- caddr_t cardAddr;
-
- /*
- ** Check to see if we actually have a board at this physical address.
- */
- if ((cardAddr = RIOCheckForATCard(Base)) != 0) {
- /*
- ** Now test the board to see if it is working.
- */
- if (RIOBoardTest(Base, cardAddr, RIO_AT, 0) == RIO_SUCCESS) {
- /*
- ** Fill out a slot in the Rio host structure.
- */
- if (RIOAssignAT(p, Base, cardAddr, mode)) {
- return(FOUND);
- }
- }
- RIOMapout(Base, RIO_AT_MEM_SIZE, cardAddr);
- }
- return(NOT_FOUND);
-}
-
-caddr_t
-RIOCheckForATCard(Base)
-int Base;
-{
- int off;
- struct DpRam *cardp; /* (Points at the host) */
- caddr_t virtAddr;
- unsigned char RIOSigTab[24];
-/*
-** Table of values to search for as prom signature of a host card
-*/
- strcpy(RIOSigTab, "JBJGPGGHINSMJPJR");
-
- /*
- ** Hey! Yes, You reading this code! Yo, grab a load a this:
- **
- ** IF the card is using WORD MODE rather than BYTE MODE
- ** then it will occupy 128K of PHYSICAL memory area. So,
- ** you might think that the following Mapin is wrong. Well,
- ** it isn't, because the SECOND 64K of occupied space is an
- ** EXACT COPY of the FIRST 64K. (good?), so, we need only
- ** map it in in one 64K block.
- */
- if (RIOMapin(Base, RIO_AT_MEM_SIZE, &virtAddr) == -1) {
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Couldn't map the board in!\n");
- return((caddr_t)0);
- }
-
- /*
- ** virtAddr points to the DP ram of the system.
- ** We now cast this to a pointer to a RIO Host,
- ** and have a rummage about in the PROM.
- */
- cardp = (struct DpRam *)virtAddr;
-
- for (off=0; RIOSigTab[off]; off++) {
- if ((RBYTE(cardp->DpSignature[off]) & 0xFF) != RIOSigTab[off]) {
- /*
- ** Signature mismatch - card not at this address
- */
- RIOMapout(Base, RIO_AT_MEM_SIZE, virtAddr);
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Couldn't match the signature 0x%x 0x%x!\n",
- (int)cardp, off);
- return((caddr_t)0);
- }
- }
-
- /*
- ** If we get here then we must have found a valid board so return
- ** its virtual address.
- */
- return(virtAddr);
-}
-#endif
/**
** RIOAssignAT :
@@ -367,667 +153,6 @@ int mode;
rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Tests Passed at 0x%x\n", Base);
return(1);
}
-#if 0
-#ifdef FUTURE_RELEASE
-int RIOMCAinit(int Mode)
-{
- uchar SlotNumber;
- caddr_t Caddr;
- uint Paddr;
- uint Ivec;
- int Handle;
- int ret = 0;
-
- /*
- ** Valid mode information for MCA cards
- ** is only FAST LINKS
- */
- Mode = (Mode & FAST_LINKS) ? McaTpFastLinks : McaTpSlowLinks;
- rio_dprintk (RIO_DEBUG_INIT, "RIOMCAinit(%d)\n",Mode);
-
-
- /*
- ** Check out each of the slots
- */
- for (SlotNumber = 0; SlotNumber < McaMaxSlots; SlotNumber++) {
- /*
- ** Enable the slot we want to talk to
- */
- outb( McaSlotSelect, SlotNumber | McaSlotEnable );
-
- /*
- ** Read the ID word from the slot
- */
- if (((inb(McaIdHigh)<< 8)|inb(McaIdLow)) == McaRIOId)
- {
- rio_dprintk (RIO_DEBUG_INIT, "Potential MCA card in slot %d\n", SlotNumber);
-
- /*
- ** Card appears to be a RIO MCA card!
- */
- RIOMachineType |= (1<<RIO_MCA);
-
- /*
- ** Just check we haven't found too many wonderful objects
- */
- if ( RIONumHosts >= RIO_HOSTS )
- {
- Rprintf(RIOMesgTooManyCards);
- return(ret);
- }
-
- /*
- ** McaIrqEnable contains the interrupt vector, and a card
- ** enable bit.
- */
- Ivec = inb(McaIrqEnable);
-
- rio_dprintk (RIO_DEBUG_INIT, "Ivec is %x\n", Ivec);
-
- switch ( Ivec & McaIrqMask )
- {
- case McaIrq9:
- rio_dprintk (RIO_DEBUG_INIT, "IRQ9\n");
- break;
- case McaIrq3:
- rio_dprintk (RIO_DEBUG_INIT, "IRQ3\n");
- break;
- case McaIrq4:
- rio_dprintk (RIO_DEBUG_INIT, "IRQ4\n");
- break;
- case McaIrq7:
- rio_dprintk (RIO_DEBUG_INIT, "IRQ7\n");
- break;
- case McaIrq10:
- rio_dprintk (RIO_DEBUG_INIT, "IRQ10\n");
- break;
- case McaIrq11:
- rio_dprintk (RIO_DEBUG_INIT, "IRQ11\n");
- break;
- case McaIrq12:
- rio_dprintk (RIO_DEBUG_INIT, "IRQ12\n");
- break;
- case McaIrq15:
- rio_dprintk (RIO_DEBUG_INIT, "IRQ15\n");
- break;
- }
-
- /*
- ** If the card enable bit isn't set, then set it!
- */
- if ((Ivec & McaCardEnable) != McaCardEnable) {
- rio_dprintk (RIO_DEBUG_INIT, "McaCardEnable not set - setting!\n");
- outb(McaIrqEnable,Ivec|McaCardEnable);
- } else
- rio_dprintk (RIO_DEBUG_INIT, "McaCardEnable already set\n");
-
- /*
- ** Convert the IRQ enable mask into something useful
- */
- Ivec = RIOMcaToIvec[Ivec & McaIrqMask];
-
- /*
- ** Find the physical address
- */
- rio_dprintk (RIO_DEBUG_INIT, "inb(McaMemory) is %x\n", inb(McaMemory));
- Paddr = McaAddress(inb(McaMemory));
-
- rio_dprintk (RIO_DEBUG_INIT, "MCA card has Ivec %d Addr %x\n", Ivec, Paddr);
-
- if ( Paddr != 0 )
- {
-
- /*
- ** Tell the memory mapper that we want to talk to it
- */
- Handle = RIOMapin( Paddr, RIO_MCA_MEM_SIZE, &Caddr );
-
- if ( Handle == -1 ) {
- rio_dprintk (RIO_DEBUG_INIT, "Couldn't map %d bytes at %x\n", RIO_MCA_MEM_SIZE, Paddr;
- continue;
- }
-
- rio_dprintk (RIO_DEBUG_INIT, "Board mapped to vaddr 0x%x\n", Caddr);
-
- /*
- ** And check that it is actually there!
- */
- if ( RIOBoardTest( Paddr,Caddr,RIO_MCA,SlotNumber ) == RIO_SUCCESS )
- {
- rio_dprintk (RIO_DEBUG_INIT, "Board has passed test\n");
- rio_dprintk (RIO_DEBUG_INIT, "Slot %d. Type %d. Paddr 0x%x. Caddr 0x%x. Mode 0x%x.\n",
- SlotNumber, RIO_MCA, Paddr, Caddr, Mode);
-
- /*
- ** Board has passed its scrub test. Fill in all the
- ** transient stuff.
- */
- p->RIOHosts[RIONumHosts].Slot = SlotNumber;
- p->RIOHosts[RIONumHosts].Ivec = Ivec;
- p->RIOHosts[RIONumHosts].Type = RIO_MCA;
- p->RIOHosts[RIONumHosts].Copy = bcopy;
- p->RIOHosts[RIONumHosts].PaddrP = Paddr;
- p->RIOHosts[RIONumHosts].Caddr = Caddr;
- p->RIOHosts[RIONumHosts].CardP = (struct DpRam *)Caddr;
- p->RIOHosts[RIONumHosts].Mode = Mode;
- WBYTE(p->RIOHosts[p->RIONumHosts].ResetInt , 0xff);
- p->RIOHosts[RIONumHosts].UniqueNum =
- ((RBYTE(p->RIOHosts[RIONumHosts].Unique[0])&0xFF)<<0)|
- ((RBYTE(p->RIOHosts[RIONumHosts].Unique[1])&0xFF)<<8)|
- ((RBYTE(p->RIOHosts[RIONumHosts].Unique[2])&0xFF)<<16)|
- ((RBYTE(p->RIOHosts[RIONumHosts].Unique[3])&0xFF)<<24);
- RIONumHosts++;
- ret++;
- }
- else
- {
- /*
- ** It failed the test, so ignore it.
- */
- rio_dprintk (RIO_DEBUG_INIT, "TEST FAILED\n");
- RIOMapout(Paddr, RIO_MCA_MEM_SIZE, Caddr );
- }
- }
- else
- {
- rio_dprintk (RIO_DEBUG_INIT, "Slot %d - Paddr zero!\n", SlotNumber);
- }
- }
- else
- {
- rio_dprintk (RIO_DEBUG_INIT, "Slot %d NOT RIO\n", SlotNumber);
- }
- }
- /*
- ** Now we have checked all the slots, turn off the MCA slot selector
- */
- outb(McaSlotSelect,0);
- rio_dprintk (RIO_DEBUG_INIT, "Slot %d NOT RIO\n", SlotNumber);
- return ret;
-}
-
-int RIOEISAinit( int Mode )
-{
- static int EISADone = 0;
- uint Paddr;
- int PollIntMixMsgDone = 0;
- caddr_t Caddr;
- ushort Ident;
- uchar EisaSlot;
- uchar Ivec;
- int ret = 0;
-
- /*
- ** The only valid mode information for EISA hosts is fast or slow
- ** links.
- */
- Mode = (Mode & FAST_LINKS) ? EISA_TP_FAST_LINKS : EISA_TP_SLOW_LINKS;
-
- if ( EISADone )
- {
- rio_dprintk (RIO_DEBUG_INIT, "RIOEISAinit() - already done, return.\n");
- return(0);
- }
-
- EISADone++;
-
- rio_dprintk (RIO_DEBUG_INIT, "RIOEISAinit()\n");
-
-
- /*
- ** First check all cards to see if ANY are set for polled mode operation.
- ** If so, set ALL to polled.
- */
-
- for ( EisaSlot=1; EisaSlot<=RIO_MAX_EISA_SLOTS; EisaSlot++ )
- {
- Ident = (INBZ(EisaSlot,EISA_PRODUCT_IDENT_HI)<<8) |
- INBZ(EisaSlot,EISA_PRODUCT_IDENT_LO);
-
- if ( Ident == RIO_EISA_IDENT )
- {
- rio_dprintk (RIO_DEBUG_INIT, "Found Specialix product\n");
-
- if ( INBZ(EisaSlot,EISA_PRODUCT_NUMBER) != RIO_EISA_PRODUCT_CODE )
- {
- rio_dprintk (RIO_DEBUG_INIT, "Not Specialix RIO - Product number %x\n",
- INBZ(EisaSlot, EISA_PRODUCT_NUMBER));
- continue; /* next slot */
- }
- /*
- ** Its a Specialix RIO!
- */
- rio_dprintk (RIO_DEBUG_INIT, "RIO Revision %d\n",
- INBZ(EisaSlot, EISA_REVISION_NUMBER));
-
- RIOMachineType |= (1<<RIO_EISA);
-
- /*
- ** Just check we haven't found too many wonderful objects
- */
- if ( RIONumHosts >= RIO_HOSTS )
- {
- Rprintf(RIOMesgTooManyCards);
- return 0;
- }
-
- /*
- ** Ensure that the enable bit is set!
- */
- OUTBZ( EisaSlot, EISA_ENABLE, RIO_EISA_ENABLE_BIT );
-
- /*
- ** EISA_INTERRUPT_VEC contains the interrupt vector.
- */
- Ivec = INBZ(EisaSlot,EISA_INTERRUPT_VEC);
-
-#ifdef RIODEBUG
- switch ( Ivec & EISA_INTERRUPT_MASK )
- {
- case EISA_IRQ_3:
- rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 3\n");
- break;
- case EISA_IRQ_4:
- rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 4\n");
- break;
- case EISA_IRQ_5:
- rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 5\n");
- break;
- case EISA_IRQ_6:
- rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 6\n");
- break;
- case EISA_IRQ_7:
- rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 7\n");
- break;
- case EISA_IRQ_9:
- rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 9\n");
- break;
- case EISA_IRQ_10:
- rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 10\n");
- break;
- case EISA_IRQ_11:
- rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 11\n");
- break;
- case EISA_IRQ_12:
- rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 12\n");
- break;
- case EISA_IRQ_14:
- rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 14\n");
- break;
- case EISA_IRQ_15:
- rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 15\n");
- break;
- case EISA_POLLED:
- rio_dprintk (RIO_DEBUG_INIT, "EISA POLLED\n");
- break;
- default:
- rio_dprintk (RIO_DEBUG_INIT, NULL,DBG_INIT|DBG_FAIL,"Shagged interrupt number!\n");
- Ivec &= EISA_CONTROL_MASK;
- }
-#endif
-
- if ( (Ivec & EISA_INTERRUPT_MASK) ==
- EISA_POLLED )
- {
- RIOWillPoll = 1;
- break; /* From EisaSlot loop */
- }
- }
- }
-
- /*
- ** Do it all again now we know whether to change all cards to polled
- ** mode or not
- */
-
- for ( EisaSlot=1; EisaSlot<=RIO_MAX_EISA_SLOTS; EisaSlot++ )
- {
- Ident = (INBZ(EisaSlot,EISA_PRODUCT_IDENT_HI)<<8) |
- INBZ(EisaSlot,EISA_PRODUCT_IDENT_LO);
-
- if ( Ident == RIO_EISA_IDENT )
- {
- if ( INBZ(EisaSlot,EISA_PRODUCT_NUMBER) != RIO_EISA_PRODUCT_CODE )
- continue; /* next slot */
-
- /*
- ** Its a Specialix RIO!
- */
-
- /*
- ** Ensure that the enable bit is set!
- */
- OUTBZ( EisaSlot, EISA_ENABLE, RIO_EISA_ENABLE_BIT );
-
- /*
- ** EISA_INTERRUPT_VEC contains the interrupt vector.
- */
- Ivec = INBZ(EisaSlot,EISA_INTERRUPT_VEC);
-
- if ( RIOWillPoll )
- {
- /*
- ** If we are going to operate in polled mode, but this
- ** board is configured to be interrupt driven, display
- ** the message explaining the situation to the punter,
- ** assuming we haven't already done so.
- */
-
- if ( !PollIntMixMsgDone &&
- (Ivec & EISA_INTERRUPT_MASK) != EISA_POLLED )
- {
- Rprintf(RIOMesgAllPolled);
- PollIntMixMsgDone = 1;
- }
-
- /*
- ** Ungraciously ignore whatever the board reports as its
- ** interrupt vector...
- */
-
- Ivec &= ~EISA_INTERRUPT_MASK;
-
- /*
- ** ...and force it to dance to the poll tune.
- */
-
- Ivec |= EISA_POLLED;
- }
-
- /*
- ** Convert the IRQ enable mask into something useful (0-15)
- */
- Ivec = RIOEisaToIvec(Ivec);
-
- rio_dprintk (RIO_DEBUG_INIT, "EISA host in slot %d has Ivec 0x%x\n",
- EisaSlot, Ivec);
-
- /*
- ** Find the physical address
- */
- Paddr = (INBZ(EisaSlot,EISA_MEMORY_BASE_HI)<<24) |
- (INBZ(EisaSlot,EISA_MEMORY_BASE_LO)<<16);
-
- rio_dprintk (RIO_DEBUG_INIT, "EISA card has Ivec %d Addr %x\n", Ivec, Paddr);
-
- if ( Paddr == 0 )
- {
- rio_dprintk (RIO_DEBUG_INIT,
- "Board in slot %d configured for address zero!\n", EisaSlot);
- continue;
- }
-
- /*
- ** Tell the memory mapper that we want to talk to it
- */
- rio_dprintk (RIO_DEBUG_INIT, "About to map EISA card \n");
-
- if (RIOMapin( Paddr, RIO_EISA_MEM_SIZE, &Caddr) == -1) {
- rio_dprintk (RIO_DEBUG_INIT, "Couldn't map %d bytes at %x\n",
- RIO_EISA_MEM_SIZE,Paddr);
- continue;
- }
-
- rio_dprintk (RIO_DEBUG_INIT, "Board mapped to vaddr 0x%x\n", Caddr);
-
- /*
- ** And check that it is actually there!
- */
- if ( RIOBoardTest( Paddr,Caddr,RIO_EISA,EisaSlot) == RIO_SUCCESS )
- {
- rio_dprintk (RIO_DEBUG_INIT, "Board has passed test\n");
- rio_dprintk (RIO_DEBUG_INIT,
- "Slot %d. Ivec %d. Type %d. Paddr 0x%x. Caddr 0x%x. Mode 0x%x.\n",
- EisaSlot,Ivec,RIO_EISA,Paddr,Caddr,Mode);
-
- /*
- ** Board has passed its scrub test. Fill in all the
- ** transient stuff.
- */
- p->RIOHosts[RIONumHosts].Slot = EisaSlot;
- p->RIOHosts[RIONumHosts].Ivec = Ivec;
- p->RIOHosts[RIONumHosts].Type = RIO_EISA;
- p->RIOHosts[RIONumHosts].Copy = bcopy;
- p->RIOHosts[RIONumHosts].PaddrP = Paddr;
- p->RIOHosts[RIONumHosts].Caddr = Caddr;
- p->RIOHosts[RIONumHosts].CardP = (struct DpRam *)Caddr;
- p->RIOHosts[RIONumHosts].Mode = Mode;
- /*
- ** because the EISA prom is mapped into IO space, we
- ** need to copy the unqiue number into the memory area
- ** that it would have occupied, so that the download
- ** code can determine its ID and card type.
- */
- WBYTE(p->RIOHosts[RIONumHosts].Unique[0],INBZ(EisaSlot,EISA_UNIQUE_NUM_0));
- WBYTE(p->RIOHosts[RIONumHosts].Unique[1],INBZ(EisaSlot,EISA_UNIQUE_NUM_1));
- WBYTE(p->RIOHosts[RIONumHosts].Unique[2],INBZ(EisaSlot,EISA_UNIQUE_NUM_2));
- WBYTE(p->RIOHosts[RIONumHosts].Unique[3],INBZ(EisaSlot,EISA_UNIQUE_NUM_3));
- p->RIOHosts[RIONumHosts].UniqueNum =
- ((RBYTE(p->RIOHosts[RIONumHosts].Unique[0])&0xFF)<<0)|
- ((RBYTE(p->RIOHosts[RIONumHosts].Unique[1])&0xFF)<<8)|
- ((RBYTE(p->RIOHosts[RIONumHosts].Unique[2])&0xFF)<<16)|
- ((RBYTE(p->RIOHosts[RIONumHosts].Unique[3])&0xFF)<<24);
- INBZ(EisaSlot,EISA_INTERRUPT_RESET);
- RIONumHosts++;
- ret++;
- }
- else
- {
- /*
- ** It failed the test, so ignore it.
- */
- rio_dprintk (RIO_DEBUG_INIT, "TEST FAILED\n");
-
- RIOMapout(Paddr, RIO_EISA_MEM_SIZE, Caddr );
- }
- }
- }
- if (RIOMachineType & RIO_EISA)
- return ret+1;
- return ret;
-}
-#endif
-
-
-#ifndef linux
-
-#define CONFIG_ADDRESS 0xcf8
-#define CONFIG_DATA 0xcfc
-#define FORWARD_REG 0xcfa
-
-
-static int
-read_config(int bus_number, int device_num, int r_number)
-{
- unsigned int cav;
- unsigned int val;
-
-/*
- Build config_address_value:
-
- 31 24 23 16 15 11 10 8 7 0
- ------------------------------------------------------
- |1| 0000000 | bus_number | device # | 000 | register |
- ------------------------------------------------------
-*/
-
- cav = r_number & 0xff;
- cav |= ((device_num & 0x1f) << 11);
- cav |= ((bus_number & 0xff) << 16);
- cav |= 0x80000000; /* Enable bit */
- outpd(CONFIG_ADDRESS,cav);
- val = inpd(CONFIG_DATA);
- outpd(CONFIG_ADDRESS,0);
- return val;
-}
-
-static
-write_config(bus_number,device_num,r_number,val)
-{
- unsigned int cav;
-
-/*
- Build config_address_value:
-
- 31 24 23 16 15 11 10 8 7 0
- ------------------------------------------------------
- |1| 0000000 | bus_number | device # | 000 | register |
- ------------------------------------------------------
-*/
-
- cav = r_number & 0xff;
- cav |= ((device_num & 0x1f) << 11);
- cav |= ((bus_number & 0xff) << 16);
- cav |= 0x80000000; /* Enable bit */
- outpd(CONFIG_ADDRESS, cav);
- outpd(CONFIG_DATA, val);
- outpd(CONFIG_ADDRESS, 0);
- return val;
-}
-#else
-/* XXX Implement these... */
-static int
-read_config(int bus_number, int device_num, int r_number)
-{
- return 0;
-}
-
-static int
-write_config(int bus_number, int device_num, int r_number)
-{
- return 0;
-}
-
-#endif
-
-int
-RIOPCIinit(p, Mode)
-struct rio_info *p;
-int Mode;
-{
- #define MAX_PCI_SLOT 32
- #define RIO_PCI_JET_CARD 0x200011CB
-
- static int slot; /* count of machine's PCI slots searched so far */
- caddr_t Caddr; /* Virtual address of the current PCI host card. */
- unsigned char Ivec; /* interrupt vector for the current PCI host */
- unsigned long Paddr; /* Physical address for the current PCI host */
- int Handle; /* Handle to Virtual memory allocated for current PCI host */
-
-
- rio_dprintk (RIO_DEBUG_INIT, "Search for a RIO PCI card - start at slot %d\n", slot);
-
- /*
- ** Initialise the search status
- */
- p->RIOLastPCISearch = RIO_FAIL;
-
- while ( (slot < MAX_PCI_SLOT) & (p->RIOLastPCISearch != RIO_SUCCESS) )
- {
- rio_dprintk (RIO_DEBUG_INIT, "Currently testing slot %d\n", slot);
-
- if (read_config(0,slot,0) == RIO_PCI_JET_CARD) {
- p->RIOHosts[p->RIONumHosts].Ivec = 0;
- Paddr = read_config(0,slot,0x18);
- Paddr = Paddr - (Paddr & 0x1); /* Mask off the io bit */
-
- if ( (Paddr == 0) || ((Paddr & 0xffff0000) == 0xffff0000) ) {
- rio_dprintk (RIO_DEBUG_INIT, "Goofed up slot\n"); /* what! */
- slot++;
- continue;
- }
-
- p->RIOHosts[p->RIONumHosts].PaddrP = Paddr;
- Ivec = (read_config(0,slot,0x3c) & 0xff);
-
- rio_dprintk (RIO_DEBUG_INIT, "PCI Host at 0x%x, Intr %d\n", (int)Paddr, Ivec);
-
- Handle = RIOMapin( Paddr, RIO_PCI_MEM_SIZE, &Caddr );
- if (Handle == -1) {
- rio_dprintk (RIO_DEBUG_INIT, "Couldn't map %d bytes at 0x%x\n", RIO_PCI_MEM_SIZE, (int)Paddr);
- slot++;
- continue;
- }
- p->RIOHosts[p->RIONumHosts].Ivec = Ivec + 32;
- p->intr_tid = iointset(p->RIOHosts[p->RIONumHosts].Ivec,
- (int (*)())rio_intr, (char *)p->RIONumHosts);
- if (RIOBoardTest( Paddr, Caddr, RIO_PCI, 0 ) == RIO_SUCCESS) {
- rio_dprintk (RIO_DEBUG_INIT, ("Board has passed test\n");
- rio_dprintk (RIO_DEBUG_INIT, ("Paddr 0x%x. Caddr 0x%x. Mode 0x%x.\n", Paddr, Caddr, Mode);
-
- /*
- ** Board has passed its scrub test. Fill in all the
- ** transient stuff.
- */
- p->RIOHosts[p->RIONumHosts].Slot = 0;
- p->RIOHosts[p->RIONumHosts].Ivec = Ivec + 32;
- p->RIOHosts[p->RIONumHosts].Type = RIO_PCI;
- p->RIOHosts[p->RIONumHosts].Copy = rio_pcicopy;
- p->RIOHosts[p->RIONumHosts].PaddrP = Paddr;
- p->RIOHosts[p->RIONumHosts].Caddr = Caddr;
- p->RIOHosts[p->RIONumHosts].CardP = (struct DpRam *)Caddr;
- p->RIOHosts[p->RIONumHosts].Mode = Mode;
-
-#if 0
- WBYTE(p->RIOHosts[p->RIONumHosts].Control,
- BOOT_FROM_RAM | EXTERNAL_BUS_OFF |
- p->RIOHosts[p->RIONumHosts].Mode |
- INTERRUPT_DISABLE );
- WBYTE(p->RIOHosts[p->RIONumHosts].ResetInt,0xff);
- WBYTE(p->RIOHosts[p->RIONumHosts].Control,
- BOOT_FROM_RAM | EXTERNAL_BUS_OFF |
- p->RIOHosts[p->RIONumHosts].Mode |
- INTERRUPT_DISABLE );
- WBYTE(p->RIOHosts[p->RIONumHosts].ResetInt,0xff);
-#else
- WBYTE(p->RIOHosts[p->RIONumHosts].ResetInt, 0xff);
-#endif
- p->RIOHosts[p->RIONumHosts].UniqueNum =
- ((RBYTE(p->RIOHosts[p->RIONumHosts].Unique[0])&0xFF)<<0)|
- ((RBYTE(p->RIOHosts[p->RIONumHosts].Unique[1])&0xFF)<<8)|
- ((RBYTE(p->RIOHosts[p->RIONumHosts].Unique[2])&0xFF)<<16)|
- ((RBYTE(p->RIOHosts[p->RIONumHosts].Unique[3])&0xFF)<<24);
-
- rio_dprintk (RIO_DEBUG_INIT, "Unique no 0x%x.\n",
- p->RIOHosts[p->RIONumHosts].UniqueNum);
-
- p->RIOLastPCISearch = RIO_SUCCESS;
- p->RIONumHosts++;
- }
- }
- slot++;
- }
-
- if ( slot >= MAX_PCI_SLOT ) {
- rio_dprintk (RIO_DEBUG_INIT, "All %d PCI slots have tested for RIO cards !!!\n",
- MAX_PCI_SLOT);
- }
-
-
- /*
- ** I don't think we want to do this anymore
- **
-
- if (!p->RIOLastPCISearch == RIO_FAIL ) {
- p->RIOFailed++;
- }
-
- **
- */
-}
-
-#ifdef FUTURE_RELEASE
-void riohalt( void )
-{
- int host;
- for ( host=0; host<p->RIONumHosts; host++ )
- {
- rio_dprintk (RIO_DEBUG_INIT, "Stop host %d\n", host);
- (void)RIOBoardTest( p->RIOHosts[host].PaddrP, p->RIOHosts[host].Caddr, p->RIOHosts[host].Type,p->RIOHosts[host].Slot );
- }
-}
-#endif
-#endif
static uchar val[] = {
#ifdef VERY_LONG_TEST
@@ -1262,200 +387,6 @@ int size;
return RIO_SUCCESS;
}
-/*
-** try to ensure that every host is either in polled mode
-** or is in interrupt mode. Only allow interrupt mode if
-** all hosts can interrupt (why?)
-** and force into polled mode if told to. Patch up the
-** interrupt vector & salute The Queen when you've done.
-*/
-#if 0
-static void
-RIOAllocateInterrupts(p)
-struct rio_info * p;
-{
- int Host;
-
- /*
- ** Easy case - if we have been told to poll, then we poll.
- */
- if (p->mode & POLLED_MODE) {
- RIOStopInterrupts(p, 0, 0);
- return;
- }
-
- /*
- ** check - if any host has been set to polled mode, then all must be.
- */
- for (Host=0; Host<p->RIONumHosts; Host++) {
- if ( (p->RIOHosts[Host].Type != RIO_AT) &&
- (p->RIOHosts[Host].Ivec == POLLED) ) {
- RIOStopInterrupts(p, 1, Host );
- return;
- }
- }
- for (Host=0; Host<p->RIONumHosts; Host++) {
- if (p->RIOHosts[Host].Type == RIO_AT) {
- if ( (p->RIOHosts[Host].Ivec - 32) == 0) {
- RIOStopInterrupts(p, 2, Host );
- return;
- }
- }
- }
-}
-
-/*
-** something has decided that we can't be doing with these
-** new-fangled interrupt thingies. Set everything up to just
-** poll.
-*/
-static void
-RIOStopInterrupts(p, Reason, Host)
-struct rio_info * p;
-int Reason;
-int Host;
-{
-#ifdef FUTURE_RELEASE
- switch (Reason) {
- case 0: /* forced into polling by rio_polled */
- break;
- case 1: /* SCU has set 'Host' into polled mode */
- break;
- case 2: /* there aren't enough interrupt vectors for 'Host' */
- break;
- }
-#endif
-
- for (Host=0; Host<p->RIONumHosts; Host++ ) {
- struct Host *HostP = &p->RIOHosts[Host];
-
- switch (HostP->Type) {
- case RIO_AT:
- /*
- ** The AT host has it's interrupts disabled by clearing the
- ** int_enable bit.
- */
- HostP->Mode &= ~INTERRUPT_ENABLE;
- HostP->Ivec = POLLED;
- break;
-#ifdef FUTURE_RELEASE
- case RIO_EISA:
- /*
- ** The EISA host has it's interrupts disabled by setting the
- ** Ivec to zero
- */
- HostP->Ivec = POLLED;
- break;
-#endif
- case RIO_PCI:
- /*
- ** The PCI host has it's interrupts disabled by clearing the
- ** int_enable bit, like a regular host card.
- */
- HostP->Mode &= ~RIO_PCI_INT_ENABLE;
- HostP->Ivec = POLLED;
- break;
-#ifdef FUTURE_RELEASE
- case RIO_MCA:
- /*
- ** There's always one, isn't there?
- ** The MCA host card cannot have it's interrupts disabled.
- */
- RIOPatchVec(HostP);
- break;
-#endif
- }
- }
-}
-
-/*
-** This function is called at init time to setup the data structures.
-*/
-void
-RIOAllocDataStructs(p)
-struct rio_info * p;
-{
- int port,
- host,
- tm;
-
- p->RIOPortp = (struct Port *)sysbrk(RIO_PORTS * sizeof(struct Port));
- if (!p->RIOPortp) {
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: No memory for port structures\n");
- p->RIOFailed++;
- return;
- }
- bzero( p->RIOPortp, sizeof(struct Port) * RIO_PORTS );
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: allocated and cleared memory for port structs\n");
- rio_dprintk (RIO_DEBUG_INIT, "First RIO port struct @0x%x, size=0x%x bytes\n",
- (int)p->RIOPortp, sizeof(struct Port));
-
- for( port=0; port<RIO_PORTS; port++ ) {
- p->RIOPortp[port].PortNum = port;
- p->RIOPortp[port].TtyP = &p->channel[port];
- sreset (p->RIOPortp[port].InUse); /* Let the first guy uses it */
- p->RIOPortp[port].portSem = -1; /* Let the first guy takes it */
- p->RIOPortp[port].ParamSem = -1; /* Let the first guy takes it */
- p->RIOPortp[port].timeout_id = 0; /* Let the first guy takes it */
- }
-
- p->RIOHosts = (struct Host *)sysbrk(RIO_HOSTS * sizeof(struct Host));
- if (!p->RIOHosts) {
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: No memory for host structures\n");
- p->RIOFailed++;
- return;
- }
- bzero(p->RIOHosts, sizeof(struct Host)*RIO_HOSTS);
- rio_dprintk (RIO_DEBUG_INIT, "RIO-init: allocated and cleared memory for host structs\n");
- rio_dprintk (RIO_DEBUG_INIT, "First RIO host struct @0x%x, size=0x%x bytes\n",
- (int)p->RIOHosts, sizeof(struct Host));
-
- for( host=0; host<RIO_HOSTS; host++ ) {
- spin_lock_init (&p->RIOHosts[host].HostLock);
- p->RIOHosts[host].timeout_id = 0; /* Let the first guy takes it */
- }
- /*
- ** check that the buffer size is valid, round down to the next power of
- ** two if necessary; if the result is zero, then, hey, no double buffers.
- */
- for ( tm = 1; tm && tm <= p->RIOConf.BufferSize; tm <<= 1 )
- ;
- tm >>= 1;
- p->RIOBufferSize = tm;
- p->RIOBufferMask = tm ? tm - 1 : 0;
-}
-
-/*
-** this function gets called whenever the data structures need to be
-** re-setup, for example, after a riohalt (why did I ever invent it?)
-*/
-void
-RIOSetupDataStructs(p)
-struct rio_info * p;
-{
- int host, entry, rup;
-
- for ( host=0; host<RIO_HOSTS; host++ ) {
- struct Host *HostP = &p->RIOHosts[host];
- for ( entry=0; entry<LINKS_PER_UNIT; entry++ ) {
- HostP->Topology[entry].Unit = ROUTE_DISCONNECT;
- HostP->Topology[entry].Link = NO_LINK;
- }
- bcopy("HOST X", HostP->Name, 7);
- HostP->Name[5] = '1'+host;
- for (rup=0; rup<(MAX_RUP + LINKS_PER_UNIT); rup++) {
- if (rup < MAX_RUP) {
- for (entry=0; entry<LINKS_PER_UNIT; entry++ ) {
- HostP->Mapping[rup].Topology[entry].Unit = ROUTE_DISCONNECT;
- HostP->Mapping[rup].Topology[entry].Link = NO_LINK;
- }
- RIODefaultName(p, HostP, rup);
- }
- spin_lock_init(&HostP->UnixRups[rup].RupLock);
- }
- }
-}
-#endif
int
RIODefaultName(p, HostP, UnitId)
@@ -1463,10 +394,6 @@ struct rio_info * p;
struct Host * HostP;
uint UnitId;
{
-#ifdef CHECK
- CheckHost( Host );
- CheckUnitId( UnitId );
-#endif
bcopy("UNKNOWN RTA X-XX",HostP->Mapping[UnitId].Name,17);
HostP->Mapping[UnitId].Name[12]='1'+(HostP-p->RIOHosts);
if ((UnitId+1) > 9) {
@@ -1483,33 +410,6 @@ uint UnitId;
#define RIO_RELEASE "Linux"
#define RELEASE_ID "1.0"
-#if 0
-static int
-RIOReport(p)
-struct rio_info * p;
-{
- char * RIORelease = RIO_RELEASE;
- char * RIORelID = RELEASE_ID;
- int host;
-
- rio_dprintk (RIO_DEBUG_INIT, "RIO : Release: %s ID: %s\n", RIORelease, RIORelID);
-
- if ( p->RIONumHosts==0 ) {
- rio_dprintk (RIO_DEBUG_INIT, "\nNo Hosts configured\n");
- return(0);
- }
-
- for ( host=0; host < p->RIONumHosts; host++ ) {
- struct Host *HostP = &p->RIOHosts[host];
- switch ( HostP->Type ) {
- case RIO_AT:
- rio_dprintk (RIO_DEBUG_INIT, "AT BUS : found the card at 0x%x\n", HostP->PaddrP);
- }
- }
- return 0;
-}
-#endif
-
static struct rioVersion stVersion;
struct rioVersion *
@@ -1523,27 +423,6 @@ RIOVersid(void)
return &stVersion;
}
-#if 0
-int
-RIOMapin(paddr, size, vaddr)
-paddr_t paddr;
-int size;
-caddr_t * vaddr;
-{
- *vaddr = (caddr_t)permap( (long)paddr, size);
- return ((int)*vaddr);
-}
-
-void
-RIOMapout(paddr, size, vaddr)
-paddr_t paddr;
-long size;
-caddr_t vaddr;
-{
-}
-#endif
-
-
void
RIOHostReset(Type, DpRamP, Slot)
uint Type;
@@ -1570,31 +449,6 @@ uint Slot;
WBYTE(DpRamP->DpResetTpu, 0xFF);
udelay(3);
break;
-#ifdef FUTURE_RELEASE
- case RIO_EISA:
- /*
- ** Bet this doesn't work!
- */
- OUTBZ( Slot, EISA_CONTROL_PORT,
- EISA_TP_RUN | EISA_TP_BUS_DISABLE |
- EISA_TP_SLOW_LINKS | EISA_TP_BOOT_FROM_RAM );
- OUTBZ( Slot, EISA_CONTROL_PORT,
- EISA_TP_RESET | EISA_TP_BUS_DISABLE |
- EISA_TP_SLOW_LINKS | EISA_TP_BOOT_FROM_RAM );
- suspend( 3 );
- OUTBZ( Slot, EISA_CONTROL_PORT,
- EISA_TP_RUN | EISA_TP_BUS_DISABLE |
- EISA_TP_SLOW_LINKS | EISA_TP_BOOT_FROM_RAM );
- break;
- case RIO_MCA:
- WBYTE(DpRamP->DpControl , McaTpBootFromRam | McaTpBusDisable );
- WBYTE(DpRamP->DpResetTpu , 0xFF );
- suspend( 3 );
- WBYTE(DpRamP->DpControl , McaTpBootFromRam | McaTpBusDisable );
- WBYTE(DpRamP->DpResetTpu , 0xFF );
- suspend( 3 );
- break;
-#endif
case RIO_PCI:
rio_dprintk (RIO_DEBUG_INIT, " (RIO_PCI)\n");
DpRamP->DpControl = RIO_PCI_BOOT_FROM_RAM;
@@ -1604,12 +458,6 @@ uint Slot;
/* for (i=0; i<6000; i++); */
/* suspend( 3 ); */
break;
-#ifdef FUTURE_RELEASE
- default:
- Rprintf(RIOMesgNoSupport,Type,DpRamP,Slot);
- return;
-#endif
-
default:
rio_dprintk (RIO_DEBUG_INIT, " (UNKNOWN)\n");
break;
diff --git a/drivers/char/rio/riolocks.h b/drivers/char/rio/riolocks.h
deleted file mode 100644
index 0e0cdacebe0b..000000000000
--- a/drivers/char/rio/riolocks.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : riolocks.h
-** SID : 1.2
-** Last Modified : 11/6/98 11:34:13
-** Retrieved : 11/6/98 11:34:22
-**
-** ident @(#)riolocks.h 1.2
-**
-** -----------------------------------------------------------------------------
-*/
-
-#ifndef __rio_riolocks_h__
-#define __rio_riolocks_h__
-
-#ifdef SCCS_LABELS
-static char *_riolocks_h_sccs_ = "@(#)riolocks.h 1.2";
-#endif
-
-#define LOCKB(lk) lockb(lk);
-#define UNLOCKB(lk, oldspl) unlockb(lk, oldspl);
-
-#endif
diff --git a/drivers/char/rio/rioparam.c b/drivers/char/rio/rioparam.c
index 4cc7f4942bfc..c622f46d6d77 100644
--- a/drivers/char/rio/rioparam.c
+++ b/drivers/char/rio/rioparam.c
@@ -195,27 +195,6 @@ int SleepFlag;
** paramed with OPEN, we want to restore the saved port termio, but
** only if StoredTermio has been saved, i.e. NOT 1st open after reboot.
*/
-#if 0
- if (PortP->FirstOpen) {
- PortP->StoredTty.iflag = TtyP->tm.c_iflag;
- PortP->StoredTty.oflag = TtyP->tm.c_oflag;
- PortP->StoredTty.cflag = TtyP->tm.c_cflag;
- PortP->StoredTty.lflag = TtyP->tm.c_lflag;
- PortP->StoredTty.line = TtyP->tm.c_line;
- for (i = 0; i < NCC + 5; i++)
- PortP->StoredTty.cc[i] = TtyP->tm.c_cc[i];
- PortP->FirstOpen = 0;
- } else if (PortP->Store || PortP->Lock) {
- rio_dprintk(RIO_DEBUG_PARAM, "OPEN: Restoring stored/locked params\n");
- TtyP->tm.c_iflag = PortP->StoredTty.iflag;
- TtyP->tm.c_oflag = PortP->StoredTty.oflag;
- TtyP->tm.c_cflag = PortP->StoredTty.cflag;
- TtyP->tm.c_lflag = PortP->StoredTty.lflag;
- TtyP->tm.c_line = PortP->StoredTty.line;
- for (i = 0; i < NCC + 5; i++)
- TtyP->tm.c_cc[i] = PortP->StoredTty.cc[i];
- }
-#endif
}
/*
@@ -273,16 +252,6 @@ int SleepFlag;
phb_param_ptr = (struct phb_param *) PacketP->data;
-#if 0
- /*
- ** COR 1
- */
- if (TtyP->tm.c_iflag & INPCK) {
- rio_dprintk(RIO_DEBUG_PARAM, "Parity checking on input enabled\n");
- Cor1 |= COR1_INPCK;
- }
-#endif
-
switch (TtyP->termios->c_cflag & CSIZE) {
case CS5:
{
@@ -524,10 +493,6 @@ int SleepFlag;
if (TtyP->termios->c_cflag & XMT1EN)
rio_dprintk(RIO_DEBUG_PARAM, "XMT1EN (?)\n");
#endif
-#if 0
- if (TtyP->termios->c_cflag & LOBLK)
- rio_dprintk(RIO_DEBUG_PARAM, "LOBLK - JCL output blocks when not current\n");
-#endif
if (TtyP->termios->c_lflag & ISIG)
rio_dprintk(RIO_DEBUG_PARAM, "Input character signal generating enabled\n");
if (TtyP->termios->c_lflag & ICANON)
@@ -572,14 +537,6 @@ int SleepFlag;
rio_dprintk(RIO_DEBUG_PARAM, "Carriage return delay set\n");
if (TtyP->termios->c_oflag & TABDLY)
rio_dprintk(RIO_DEBUG_PARAM, "Tab delay set\n");
-#if 0
- if (TtyP->termios->c_oflag & BSDLY)
- rio_dprintk(RIO_DEBUG_PARAM, "Back-space delay set\n");
- if (TtyP->termios->c_oflag & VTDLY)
- rio_dprintk(RIO_DEBUG_PARAM, "Vertical tab delay set\n");
- if (TtyP->termios->c_oflag & FFDLY)
- rio_dprintk(RIO_DEBUG_PARAM, "Form-feed delay set\n");
-#endif
/*
** These things are kind of useful in a later life!
*/
diff --git a/drivers/char/rio/rioroute.c b/drivers/char/rio/rioroute.c
index 0f4cd33ba641..f98888f52659 100644
--- a/drivers/char/rio/rioroute.c
+++ b/drivers/char/rio/rioroute.c
@@ -112,15 +112,6 @@ int RIORouteRup(struct rio_info *p, uint Rup, struct Host *HostP, PKT * PacketP)
int Lies;
unsigned long flags;
-#ifdef STACK
- RIOStackCheck("RIORouteRup");
-#endif
-#ifdef CHECK
- CheckPacketP(PacketP);
- CheckHostP(HostP);
- CheckRup(Rup);
- CheckHost(Host);
-#endif
/*
** Is this unit telling us it's current link topology?
*/
@@ -540,9 +531,6 @@ uint unit;
for (port = 0; port < PORTS_PER_RTA; port++, PortN++) {
ushort dest_port = port + 8;
-#if 0
- uint PktInt;
-#endif
WORD *TxPktP;
PKT *Pkt;
@@ -623,10 +611,6 @@ uint UnitId;
unsigned long flags;
rio_spin_lock_irqsave(&HostP->HostLock, flags);
-#ifdef CHECK
- CheckHostP(HostP);
- CheckUnitId(UnitId);
-#endif
if (RIOCheck(HostP, UnitId)) {
rio_dprintk(RIO_DEBUG_ROUTE, "Unit %d is NOT isolated\n", UnitId);
rio_spin_unlock_irqrestore(&HostP->HostLock, flags);
@@ -651,10 +635,6 @@ uint UnitId;
{
uint link, unit;
-#ifdef CHECK
- CheckHostP(HostP);
- CheckUnitId(UnitId);
-#endif
UnitId--; /* this trick relies on the Unit Id being UNSIGNED! */
if (UnitId >= MAX_RUP) /* dontcha just lurv unsigned maths! */
@@ -684,10 +664,6 @@ uint UnitId;
{
unsigned char link;
-#ifdef CHECK
- CheckHostP(HostP);
- CheckUnitId(UnitId);
-#endif
/* rio_dprint(RIO_DEBUG_ROUTE, ("Check to see if unit %d has a route to the host\n",UnitId)); */
rio_dprintk(RIO_DEBUG_ROUTE, "RIOCheck : UnitID = %d\n", UnitId);
diff --git a/drivers/char/rio/riotable.c b/drivers/char/rio/riotable.c
index 42c3dffcbbb2..a86b216ab653 100644
--- a/drivers/char/rio/riotable.c
+++ b/drivers/char/rio/riotable.c
@@ -754,11 +754,6 @@ struct Map *HostMapP;
ushort RtaType;
unsigned long flags;
-#ifdef CHECK
- CheckHostP(HostP);
- CheckHostMapP(HostMapP);
-#endif
-
rio_dprintk(RIO_DEBUG_TABLE, "Mapping sysport %d to id %d\n", (int) HostMapP->SysPort, HostMapP->ID);
/*
@@ -784,9 +779,6 @@ struct Map *HostMapP;
rio_dprintk(RIO_DEBUG_TABLE, "c1 p = %p, p->rioPortp = %p\n", p, p->RIOPortp);
PortP = p->RIOPortp[SysPort];
-#if 0
- PortP->TtyP = &p->channel[SysPort];
-#endif
rio_dprintk(RIO_DEBUG_TABLE, "Map port\n");
/*
diff --git a/drivers/char/rio/riotime.h b/drivers/char/rio/riotime.h
deleted file mode 100644
index 35e01cd103d0..000000000000
--- a/drivers/char/rio/riotime.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/****************************************************************************
- ******* *******
- ******* T I M E
- ******* *******
- ****************************************************************************
-
- Author : Jeremy Rolls
- Date :
-
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
-
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Version : 0.01
-
-
- Mods
- ----------------------------------------------------------------------------
- Date By Description
- ----------------------------------------------------------------------------
-
- ***************************************************************************/
-
-#ifndef _riotime_h
-#define _riotime_h 1
-
-#ifndef lint
-#ifdef SCCS
-static char *_rio_riotime_h_sccs = "@(#)riotime.h 1.1";
-#endif
-#endif
-
-#define TWO_POWER_FIFTEEN (ushort)32768
-#define RioTime() riotime
-#define RioTimeAfter(time1,time2) ((ushort)time1 - (ushort)time2) < TWO_POWER_FIFTEEN
-#define RioTimePlus(time1,time2) ((ushort)time1 + (ushort)time2)
-
-/**************************************
- * Convert a RIO tick (1/10th second)
- * into transputer low priority ticks
- *************************************/
-#define RioTimeToLow(time) (time*(100000 / 64))
-#define RioLowToTime(time) ((time*64)/100000)
-
-#define RIOTENTHSECOND (ushort)1
-#define RIOSECOND (ushort)(RIOTENTHSECOND * 10)
-#endif
-
-/*********** end of file ***********/
diff --git a/drivers/char/rio/riotty.c b/drivers/char/rio/riotty.c
index 5894a25b0113..6379816ed173 100644
--- a/drivers/char/rio/riotty.c
+++ b/drivers/char/rio/riotty.c
@@ -89,16 +89,9 @@ static char *_riotty_c_sccs_ = "@(#)riotty.c 1.3";
#include "list.h"
#include "sam.h"
-#if 0
-static void ttyseth_pv(struct Port *, struct ttystatics *, struct termios *sg, int);
-#endif
-
static void RIOClearUp(struct Port *PortP);
int RIOShortCommand(struct rio_info *p, struct Port *PortP, int command, int len, int arg);
-#if 0
-static int RIOCookMode(struct ttystatics *);
-#endif
extern int conv_vb[]; /* now defined in ttymgr.c */
extern int conv_bv[]; /* now defined in ttymgr.c */
@@ -226,33 +219,6 @@ int riotopen(struct tty_struct *tty, struct file *filp)
** until the RTA is present then we must spin here waiting for
** the RTA to boot.
*/
-#if 0
- if (!(PortP->HostP->Mapping[PortP->RupNum].Flags & RTA_BOOTED)) {
- if (PortP->WaitUntilBooted) {
- rio_dprintk(RIO_DEBUG_TTY, "Waiting for RTA to boot\n");
- do {
- if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL) {
- rio_dprintk(RIO_DEBUG_TTY, "RTA EINTR in delay \n");
- func_exit();
- return -EINTR;
- }
- if (repeat_this-- <= 0) {
- rio_dprintk(RIO_DEBUG_TTY, "Waiting for RTA to boot timeout\n");
- RIOPreemptiveCmd(p, PortP, FCLOSE);
- pseterr(EINTR);
- func_exit();
- return -EIO;
- }
- } while (!(PortP->HostP->Mapping[PortP->RupNum].Flags & RTA_BOOTED));
- rio_dprintk(RIO_DEBUG_TTY, "RTA has been booted\n");
- } else {
- rio_dprintk(RIO_DEBUG_TTY, "RTA never booted\n");
- pseterr(ENXIO);
- func_exit();
- return 0;
- }
- }
-#else
/* I find the above code a bit hairy. I find the below code
easier to read and shorter. Now, if it works too that would
be great... -- REW
@@ -281,21 +247,10 @@ int riotopen(struct tty_struct *tty, struct file *filp)
}
}
rio_dprintk(RIO_DEBUG_TTY, "RTA has been booted\n");
-#endif
-#if 0
- tp = PortP->TtyP; /* get tty struct */
-#endif
rio_spin_lock_irqsave(&PortP->portSem, flags);
if (p->RIOHalted) {
goto bombout;
}
-#if 0
- retval = gs_init_port(&PortP->gs);
- if (retval) {
- func_exit();
- return retval;
- }
-#endif
/*
** If the port is in the final throws of being closed,
@@ -363,11 +318,6 @@ int riotopen(struct tty_struct *tty, struct file *filp)
command piggybacks the parameters immediately.
-- REW */
RIOParam(PortP, OPEN, Modem, OK_TO_SLEEP); /* Open the port */
-#if 0
- /* This delay of 1 second was annoying. I removed it. -- REW */
- RIODelay(PortP, HUNDRED_MS * 10);
- RIOParam(PortP, CONFIG, Modem, OK_TO_SLEEP); /* Config the port */
-#endif
rio_spin_lock_irqsave(&PortP->portSem, flags);
/*
@@ -439,9 +389,6 @@ int riotopen(struct tty_struct *tty, struct file *filp)
PortP->State |= RIO_WOPEN;
rio_spin_unlock_irqrestore(&PortP->portSem, flags);
if (RIODelay(PortP, HUNDRED_MS) == RIO_FAIL)
-#if 0
- if (sleep((caddr_t) & tp->tm.c_canqo, TTIPRI | PCATCH))
-#endif
{
/*
** ACTION: verify that this is a good thing
@@ -505,10 +452,6 @@ int riotopen(struct tty_struct *tty, struct file *filp)
*/
int riotclose(void *ptr)
{
-#if 0
- register uint SysPort = dev;
- struct ttystatics *tp; /* pointer to our ttystruct */
-#endif
struct Port *PortP = ptr; /* pointer to the port structure */
int deleted = 0;
int try = -1; /* Disable the timeouts by setting them to -1 */
@@ -534,13 +477,6 @@ int riotclose(void *ptr)
end_time = jiffies + MAX_SCHEDULE_TIMEOUT;
Modem = rio_ismodem(tty);
-#if 0
- /* What F.CKING cache? Even then, a higly idle multiprocessor,
- system with large caches this won't work . Better find out when
- this doesn't work asap, and fix the cause. -- REW */
-
- RIODelay(PortP, HUNDRED_MS * 10); /* To flush the cache */
-#endif
rio_spin_lock_irqsave(&PortP->portSem, flags);
/*
@@ -703,45 +639,6 @@ int riotclose(void *ptr)
}
-/*
-** decide if we need to use the line discipline.
-** This routine can return one of three values:
-** COOK_RAW if no processing has to be done by the line discipline or the card
-** COOK_WELL if the line discipline must be used to do the processing
-** COOK_MEDIUM if the card can do all the processing necessary.
-*/
-#if 0
-static int RIOCookMode(struct ttystatics *tp)
-{
- /*
- ** We can't handle tm.c_mstate != 0 on SCO
- ** We can't handle mapping
- ** We can't handle non-ttwrite line disc.
- ** We can't handle lflag XCASE
- ** We can handle oflag OPOST & (OCRNL, ONLCR, TAB3)
- */
-
-#ifdef CHECK
- CheckTtyP(tp);
-#endif
- if (!(tp->tm.c_oflag & OPOST)) /* No post processing */
- return COOK_RAW; /* Raw mode o/p */
-
- if (tp->tm.c_lflag & XCASE)
- return COOK_WELL; /* Use line disc */
-
- if (tp->tm.c_oflag & ~(OPOST | ONLCR | OCRNL | TAB3))
- return COOK_WELL; /* Use line disc for strange modes */
-
- if (tp->tm.c_oflag == OPOST) /* If only OPOST is set, do RAW */
- return COOK_RAW;
-
- /*
- ** So, we need to output process!
- */
- return COOK_MEDIUM;
-}
-#endif
static void RIOClearUp(PortP)
struct Port *PortP;
@@ -776,11 +673,6 @@ int RIOShortCommand(struct rio_info *p, struct Port *PortP, int command, int len
unsigned long flags;
rio_dprintk(RIO_DEBUG_TTY, "entering shortcommand.\n");
-#ifdef CHECK
- CheckPortP(PortP);
- if (len < 1 || len > 2)
- cprintf(("STUPID LENGTH %d\n", len));
-#endif
if (PortP->State & RIO_DELETED) {
rio_dprintk(RIO_DEBUG_TTY, "Short command to deleted RTA ignored\n");
@@ -852,478 +744,3 @@ int RIOShortCommand(struct rio_info *p, struct Port *PortP, int command, int len
}
-#if 0
-/*
-** This is an ioctl interface. This is the twentieth century. You know what
-** its all about.
-*/
-int riotioctl(struct rio_info *p, struct tty_struct *tty, int cmd, caddr_t arg)
-{
- register struct Port *PortP;
- register struct ttystatics *tp;
- int current;
- int ParamSemIncremented = 0;
- int old_oflag, old_cflag, old_iflag, changed, oldcook;
- int i;
- unsigned char sio_regs[5]; /* Here be magic */
- short vpix_cflag;
- short divisor;
- int baud;
- uint SysPort = rio_minor(tty);
- int Modem = rio_ismodem(tty);
- int ioctl_processed;
-
- rio_dprintk(RIO_DEBUG_TTY, "port ioctl SysPort %d command 0x%x argument 0x%x %s\n", SysPort, cmd, arg, Modem ? "Modem" : "tty");
-
- if (SysPort >= RIO_PORTS) {
- rio_dprintk(RIO_DEBUG_TTY, "Bad port number %d\n", SysPort);
- return -ENXIO;
- }
-
- PortP = p->RIOPortp[SysPort];
- tp = PortP->TtyP;
-
- rio_spin_lock_irqsave(&PortP->portSem, flags);
-
-#ifdef STATS
- PortP->Stat.IoctlCnt++;
-#endif
-
- if (PortP->State & RIO_DELETED) {
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return -EIO;
- }
-
-
- if (p->RIOHalted) {
- RIOClearUp(PortP);
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return -EIO;
- }
-
- /*
- ** Count ioctls for port statistics reporting
- */
- if (PortP->statsGather)
- PortP->ioctls++;
-
- /*
- ** Specialix RIO Ioctl calls
- */
- switch (cmd) {
-
- case TCRIOTRIAD:
- if (arg)
- PortP->State |= RIO_TRIAD_MODE;
- else
- PortP->State &= ~RIO_TRIAD_MODE;
- /*
- ** Normally, when istrip is set on a port, a config is
- ** sent to the RTA instructing the CD1400 to do the
- ** stripping. In TRIAD mode, the interrupt receive routine
- ** must do the stripping instead, since it has to detect
- ** an 8 bit function key sequence. If istrip is set with
- ** TRIAD mode on(off), and 8 bit data is being read by
- ** the port, the user then turns TRIAD mode off(on), the RTA
- ** must be reconfigured (not) to do the stripping.
- ** Hence we call RIOParam here.
- */
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- RIOParam(PortP, CONFIG, Modem, OK_TO_SLEEP);
- return 0;
-
- case TCRIOTSTATE:
- rio_dprintk(RIO_DEBUG_TTY, "tbusy/tstop monitoring %sabled\n", arg ? "en" : "dis");
- /* MonitorTstate = 0 ; */
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- RIOParam(PortP, CONFIG, Modem, OK_TO_SLEEP);
- return 0;
-
- case TCRIOSTATE: /* current state of Modem input pins */
- rio_dprintk(RIO_DEBUG_TTY, "TCRIOSTATE\n");
- if (RIOPreemptiveCmd(p, PortP, MGET) == RIO_FAIL)
- rio_dprintk(RIO_DEBUG_TTY, "TCRIOSTATE command failed\n");
- PortP->State |= RIO_BUSY;
- current = PortP->ModemState;
- if (copyout((caddr_t) & current, (int) arg, sizeof(current)) == COPYFAIL) {
- rio_dprintk(RIO_DEBUG_TTY, "Copyout failed\n");
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- pseterr(EFAULT);
- }
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return 0;
-
- case TCRIOMBIS: /* Set modem lines */
- case TCRIOMBIC: /* Clear modem lines */
- rio_dprintk(RIO_DEBUG_TTY, "TCRIOMBIS/TCRIOMBIC\n");
- if (cmd == TCRIOMBIS) {
- uint state;
- state = (uint) arg;
- PortP->ModemState |= (ushort) state;
- PortP->ModemLines = (ulong) arg;
- if (RIOPreemptiveCmd(p, PortP, MBIS) == RIO_FAIL)
- rio_dprintk(RIO_DEBUG_TTY, "TCRIOMBIS command failed\n");
- } else {
- uint state;
-
- state = (uint) arg;
- PortP->ModemState &= ~(ushort) state;
- PortP->ModemLines = (ulong) arg;
- if (RIOPreemptiveCmd(p, PortP, MBIC) == RIO_FAIL)
- rio_dprintk(RIO_DEBUG_TTY, "TCRIOMBIC command failed\n");
- }
- PortP->State |= RIO_BUSY;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return 0;
-
- case TCRIOXPON: /* set Xprint ON string */
- rio_dprintk(RIO_DEBUG_TTY, "TCRIOXPON\n");
- if (copyin((int) arg, (caddr_t) PortP->Xprint.XpOn, MAX_XP_CTRL_LEN) == COPYFAIL) {
- rio_dprintk(RIO_DEBUG_TTY, "Copyin failed\n");
- PortP->Xprint.XpOn[0] = '\0';
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- pseterr(EFAULT);
- }
- PortP->Xprint.XpOn[MAX_XP_CTRL_LEN - 1] = '\0';
- PortP->Xprint.XpLen = strlen(PortP->Xprint.XpOn) + strlen(PortP->Xprint.XpOff);
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return 0;
-
- case TCRIOXPOFF: /* set Xprint OFF string */
- rio_dprintk(RIO_DEBUG_TTY, "TCRIOXPOFF\n");
- if (copyin((int) arg, (caddr_t) PortP->Xprint.XpOff, MAX_XP_CTRL_LEN) == COPYFAIL) {
- rio_dprintk(RIO_DEBUG_TTY, "Copyin failed\n");
- PortP->Xprint.XpOff[0] = '\0';
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- pseterr(EFAULT);
- }
- PortP->Xprint.XpOff[MAX_XP_CTRL_LEN - 1] = '\0';
- PortP->Xprint.XpLen = strlen(PortP->Xprint.XpOn) + strlen(PortP->Xprint.XpOff);
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return 0;
-
- case TCRIOXPCPS: /* set Xprint CPS string */
- rio_dprintk(RIO_DEBUG_TTY, "TCRIOXPCPS\n");
- if ((uint) arg > p->RIOConf.MaxXpCps || (uint) arg < p->RIOConf.MinXpCps) {
- rio_dprintk(RIO_DEBUG_TTY, "%d CPS out of range\n", arg);
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- pseterr(EINVAL);
- return 0;
- }
- PortP->Xprint.XpCps = (uint) arg;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return 0;
-
- case TCRIOXPRINT:
- rio_dprintk(RIO_DEBUG_TTY, "TCRIOXPRINT\n");
- if (copyout((caddr_t) & PortP->Xprint, (int) arg, sizeof(struct Xprint)) == COPYFAIL) {
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- pseterr(EFAULT);
- }
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return 0;
-
- case TCRIOIXANYON:
- rio_dprintk(RIO_DEBUG_TTY, "TCRIOIXANYON\n");
- PortP->Config |= RIO_IXANY;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return 0;
-
- case TCRIOIXANYOFF:
- rio_dprintk(RIO_DEBUG_TTY, "TCRIOIXANYOFF\n");
- PortP->Config &= ~RIO_IXANY;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return 0;
-
- case TCRIOIXONON:
- rio_dprintk(RIO_DEBUG_TTY, "TCRIOIXONON\n");
- PortP->Config |= RIO_IXON;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return 0;
-
- case TCRIOIXONOFF:
- rio_dprintk(RIO_DEBUG_TTY, "TCRIOIXONOFF\n");
- PortP->Config &= ~RIO_IXON;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return 0;
-
-/*
-** 15.10.1998 ARG - ESIL 0761 part fix
-** Added support for CTS and RTS flow control ioctls :
-*/
- case TCRIOCTSFLOWEN:
- rio_dprintk(RIO_DEBUG_TTY, "TCRIOCTSFLOWEN\n");
- PortP->Config |= RIO_CTSFLOW;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- RIOParam(PortP, CONFIG, Modem, OK_TO_SLEEP);
- return 0;
-
- case TCRIOCTSFLOWDIS:
- rio_dprintk(RIO_DEBUG_TTY, "TCRIOCTSFLOWDIS\n");
- PortP->Config &= ~RIO_CTSFLOW;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- RIOParam(PortP, CONFIG, Modem, OK_TO_SLEEP);
- return 0;
-
- case TCRIORTSFLOWEN:
- rio_dprintk(RIO_DEBUG_TTY, "TCRIORTSFLOWEN\n");
- PortP->Config |= RIO_RTSFLOW;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- RIOParam(PortP, CONFIG, Modem, OK_TO_SLEEP);
- return 0;
-
- case TCRIORTSFLOWDIS:
- rio_dprintk(RIO_DEBUG_TTY, "TCRIORTSFLOWDIS\n");
- PortP->Config &= ~RIO_RTSFLOW;
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- RIOParam(PortP, CONFIG, Modem, OK_TO_SLEEP);
- return 0;
-
-/* end ESIL 0761 part fix */
-
- }
-
-
- /* Lynx IOCTLS */
- switch (cmd) {
- case TIOCSETP:
- case TIOCSETN:
- case OTIOCSETP:
- case OTIOCSETN:
- ioctl_processed++;
- ttyseth(PortP, tp, (struct old_sgttyb *) arg);
- break;
- case TCSETA:
- case TCSETAW:
- case TCSETAF:
- ioctl_processed++;
- rio_dprintk(RIO_DEBUG_TTY, "NON POSIX ioctl\n");
- ttyseth_pv(PortP, tp, (struct termios *) arg, 0);
- break;
- case TCSETAP: /* posix tcsetattr() */
- case TCSETAWP: /* posix tcsetattr() */
- case TCSETAFP: /* posix tcsetattr() */
- rio_dprintk(RIO_DEBUG_TTY, "NON POSIX SYSV ioctl\n");
- ttyseth_pv(PortP, tp, (struct termios *) arg, 1);
- ioctl_processed++;
- break;
- }
-
- /*
- ** If its any of the commands that require the port to be in the
- ** non-busy state wait until all output has drained
- */
- if (!ioctl_processed)
- switch (cmd) {
- case TCSETAW:
- case TCSETAF:
- case TCSETA:
- case TCSBRK:
-#define OLD_POSIX ('x' << 8)
-#define OLD_POSIX_SETA (OLD_POSIX | 2)
-#define OLD_POSIX_SETAW (OLD_POSIX | 3)
-#define OLD_POSIX_SETAF (OLD_POSIX | 4)
-#define NEW_POSIX (('i' << 24) | ('X' << 16))
-#define NEW_POSIX_SETA (NEW_POSIX | 2)
-#define NEW_POSIX_SETAW (NEW_POSIX | 3)
-#define NEW_POSIX_SETAF (NEW_POSIX | 4)
- case OLD_POSIX_SETA:
- case OLD_POSIX_SETAW:
- case OLD_POSIX_SETAF:
- case NEW_POSIX_SETA:
- case NEW_POSIX_SETAW:
- case NEW_POSIX_SETAF:
-#ifdef TIOCSETP
- case TIOCSETP:
-#endif
- case TIOCSETD:
- case TIOCSETN:
- rio_dprintk(RIO_DEBUG_TTY, "wait for non-BUSY, semaphore set\n");
- /*
- ** Wait for drain here, at least as far as the double buffer
- ** being empty.
- */
- /* XXX Does the above comment mean that this has
- still to be implemented? -- REW */
- /* XXX Is the locking OK together with locking
- in txenable? (Deadlock?) -- REW */
-
- RIOTxEnable((char *) PortP);
- break;
- default:
- break;
- }
-
- old_cflag = tp->tm.c_cflag;
- old_iflag = tp->tm.c_iflag;
- old_oflag = tp->tm.c_oflag;
- oldcook = PortP->CookMode;
-
- if (p->RIOHalted) {
- RIOClearUp(PortP);
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- pseterr(EIO);
- return 0;
- }
-
- PortP->FlushCmdBodge = 0;
-
- /*
- ** If the port is locked, and it is reconfigured, we want
- ** to restore the state of the tty structure so the change is NOT
- ** made.
- */
- if (PortP->Lock) {
- tp->tm.c_iflag = PortP->StoredTty.iflag;
- tp->tm.c_oflag = PortP->StoredTty.oflag;
- tp->tm.c_cflag = PortP->StoredTty.cflag;
- tp->tm.c_lflag = PortP->StoredTty.lflag;
- tp->tm.c_line = PortP->StoredTty.line;
- for (i = 0; i < NCC + 1; i++)
- tp->tm.c_cc[i] = PortP->StoredTty.cc[i];
- } else {
- /*
- ** If the port is set to store the parameters, and it is
- ** reconfigured, we want to save the current tty struct so it
- ** may be restored on the next open.
- */
- if (PortP->Store) {
- PortP->StoredTty.iflag = tp->tm.c_iflag;
- PortP->StoredTty.oflag = tp->tm.c_oflag;
- PortP->StoredTty.cflag = tp->tm.c_cflag;
- PortP->StoredTty.lflag = tp->tm.c_lflag;
- PortP->StoredTty.line = tp->tm.c_line;
- for (i = 0; i < NCC + 1; i++)
- PortP->StoredTty.cc[i] = tp->tm.c_cc[i];
- }
- }
-
- changed = (tp->tm.c_cflag != old_cflag) || (tp->tm.c_iflag != old_iflag) || (tp->tm.c_oflag != old_oflag);
-
- PortP->CookMode = RIOCookMode(tp); /* Set new cooking mode */
-
- rio_dprintk(RIO_DEBUG_TTY, "RIOIoctl changed %d newcook %d oldcook %d\n", changed, PortP->CookMode, oldcook);
-
-#ifdef MODEM_SUPPORT
- /*
- ** kludge to force CARR_ON if CLOCAL set
- */
- if ((tp->tm.c_cflag & CLOCAL) || (PortP->ModemState & MSVR1_CD)) {
- tp->tm.c_state |= CARR_ON;
- wakeup((caddr_t) & tp->tm.c_canq);
- }
-#endif
-
- if (p->RIOHalted) {
- RIOClearUp(PortP);
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- pseterr(EIO);
- return 0;
- }
- /*
- ** Re-configure if modes or cooking have changed
- */
- if (changed || oldcook != PortP->CookMode || (ioctl_processed)) {
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- rio_dprintk(RIO_DEBUG_TTY, "Ioctl changing the PORT settings\n");
- RIOParam(PortP, CONFIG, Modem, OK_TO_SLEEP);
- rio_spin_lock_irqsave(&PortP->portSem, flags);
- }
-
- if (p->RIOHalted) {
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- RIOClearUp(PortP);
- pseterr(EIO);
- return 0;
- }
- rio_spin_unlock_irqrestore(&PortP->portSem, flags);
- return 0;
-}
-
-/*
- ttyseth -- set hardware dependent tty settings
-*/
-void ttyseth(PortP, s, sg)
-struct Port *PortP;
-struct ttystatics *s;
-struct old_sgttyb *sg;
-{
- struct old_sgttyb *tsg;
- struct termios *tp = &s->tm;
-
- tsg = &s->sg;
-
- if (sg->sg_flags & (EVENP | ODDP)) {
- tp->c_cflag &= PARENB;
- if (sg->sg_flags & EVENP) {
- if (sg->sg_flags & ODDP) {
- tp->c_cflag &= V_CS7;
- tp->c_cflag &= ~PARENB;
- } else {
- tp->c_cflag &= V_CS7;
- tp->c_cflag &= PARENB;
- tp->c_cflag &= PARODD;
- }
- } else if (sg->sg_flags & ODDP) {
- tp->c_cflag &= V_CS7;
- tp->c_cflag &= PARENB;
- tp->c_cflag &= PARODD;
- } else {
- tp->c_cflag &= V_CS7;
- tp->c_cflag &= PARENB;
- }
- }
-/*
- * Use ispeed as the desired speed. Most implementations don't handle
- * separate input and output speeds very well. If the RIO handles this,
- * I will have to use separate sets of flags to store them in the
- * Port structure.
- */
- if (!sg->sg_ospeed)
- sg->sg_ospeed = sg->sg_ispeed;
- else
- sg->sg_ispeed = sg->sg_ospeed;
- if (sg->sg_ispeed > V_EXTB)
- sg->sg_ispeed = V_EXTB;
- if (sg->sg_ispeed < V_B0)
- sg->sg_ispeed = V_B0;
- *tsg = *sg;
- tp->c_cflag = (tp->c_cflag & ~V_CBAUD) | conv_bv[(int) sg->sg_ispeed];
-}
-
-/*
- ttyseth_pv -- set hardware dependent tty settings using either the
- POSIX termios structure or the System V termio structure.
- sysv = 0 => (POSIX): struct termios *sg
- sysv != 0 => (System V): struct termio *sg
-*/
-static void ttyseth_pv(PortP, s, sg, sysv)
-struct Port *PortP;
-struct ttystatics *s;
-struct termios *sg;
-int sysv;
-{
- int speed;
- unsigned char csize;
- unsigned char cread;
- unsigned int lcr_flags;
- int ps;
-
- if (sysv) {
- /* sg points to a System V termio structure */
- csize = ((struct termio *) sg)->c_cflag & CSIZE;
- cread = ((struct termio *) sg)->c_cflag & CREAD;
- speed = conv_vb[((struct termio *) sg)->c_cflag & V_CBAUD];
- } else {
- /* sg points to a POSIX termios structure */
- csize = sg->c_cflag & CSIZE;
- cread = sg->c_cflag & CREAD;
- speed = conv_vb[sg->c_cflag & V_CBAUD];
- }
- if (s->sg.sg_ispeed != speed || s->sg.sg_ospeed != speed) {
- s->sg.sg_ispeed = speed;
- s->sg.sg_ospeed = speed;
- s->tm.c_cflag = (s->tm.c_cflag & ~V_CBAUD) | conv_bv[(int) s->sg.sg_ispeed];
- }
-}
-#endif
diff --git a/drivers/char/rio/riowinif.h b/drivers/char/rio/riowinif.h
deleted file mode 100644
index f802d7593b80..000000000000
--- a/drivers/char/rio/riowinif.h
+++ /dev/null
@@ -1,1329 +0,0 @@
-/************************************************************************/
-/* */
-/* Title : RIO Shared Memory Window Inteface */
-/* */
-/* Author : N.P.Vassallo */
-/* */
-/* Creation : 7th June 1999 */
-/* */
-/* Version : 1.0.0 */
-/* */
-/* Copyright : (c) Specialix International Ltd. 1999 *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- * */
-/* Description : Prototypes, structures and definitions */
-/* describing RIO host card shared memory */
-/* window interface structures: */
-/* PARMMAP */
-/* RUP */
-/* PHB */
-/* LPB */
-/* PKT */
-/* */
-/************************************************************************/
-
-/* History...
-
-1.0.0 07/06/99 NPV Creation. (based on PARMMAP.H)
-
-*/
-
-#ifndef _riowinif_h /* If RIOWINDIF.H not already defined */
-#define _riowinif_h 1
-
-/*****************************************************************************
-******************************** *********************************
-******************************** General *********************************
-******************************** *********************************
-*****************************************************************************/
-
-#define TPNULL ((_u16)(0x8000))
-
-/*****************************************************************************
-******************************** ********************************
-******************************** PARM_MAP ********************************
-******************************** ********************************
-*****************************************************************************/
-
-/* The PARM_MAP structure defines global values relating to the Host Card / RTA
- and is the main structure from which all other structures are referenced. */
-
-typedef struct _PARM_MAP {
- _u16 phb_ptr; /* 0x00 Pointer to the PHB array */
- _u16 phb_num_ptr; /* 0x02 Ptr to Number of PHB's */
- _u16 free_list; /* 0x04 Free List pointer */
- _u16 free_list_end; /* 0x06 Free List End pointer */
- _u16 q_free_list_ptr; /* 0x08 Ptr to Q_BUF variable */
- _u16 unit_id_ptr; /* 0x0A Unit Id */
- _u16 link_str_ptr; /* 0x0C Link Structure Array */
- _u16 bootloader_1; /* 0x0E 1st Stage Boot Loader */
- _u16 bootloader_2; /* 0x10 2nd Stage Boot Loader */
- _u16 port_route_map_ptr; /* 0x12 Port Route Map */
- _u16 route_ptr; /* 0x14 Route Map */
- _u16 map_present; /* 0x16 Route Map present */
- _u16 pkt_num; /* 0x18 Total number of packets */
- _u16 q_num; /* 0x1A Total number of Q packets */
- _u16 buffers_per_port; /* 0x1C Number of buffers per port */
- _u16 heap_size; /* 0x1E Initial size of heap */
- _u16 heap_left; /* 0x20 Current Heap left */
- _u16 error; /* 0x22 Error code */
- _u16 tx_max; /* 0x24 Max number of tx pkts per phb */
- _u16 rx_max; /* 0x26 Max number of rx pkts per phb */
- _u16 rx_limit; /* 0x28 For high / low watermarks */
- _u16 links; /* 0x2A Links to use */
- _u16 timer; /* 0x2C Interrupts per second */
- _u16 rups; /* 0x2E Pointer to the RUPs */
- _u16 max_phb; /* 0x30 Mostly for debugging */
- _u16 living; /* 0x32 Just increments!! */
- _u16 init_done; /* 0x34 Initialisation over */
- _u16 booting_link; /* 0x36 */
- _u16 idle_count; /* 0x38 Idle time counter */
- _u16 busy_count; /* 0x3A Busy counter */
- _u16 idle_control; /* 0x3C Control Idle Process */
- _u16 tx_intr; /* 0x3E TX interrupt pending */
- _u16 rx_intr; /* 0x40 RX interrupt pending */
- _u16 rup_intr; /* 0x42 RUP interrupt pending */
-
-} PARM_MAP;
-
-/* Same thing again, but defined as offsets... */
-
-#define PM_phb_ptr 0x00 /* 0x00 Pointer to the PHB array */
-#define PM_phb_num_ptr 0x02 /* 0x02 Ptr to Number of PHB's */
-#define PM_free_list 0x04 /* 0x04 Free List pointer */
-#define PM_free_list_end 0x06 /* 0x06 Free List End pointer */
-#define PM_q_free_list_ptr 0x08 /* 0x08 Ptr to Q_BUF variable */
-#define PM_unit_id_ptr 0x0A /* 0x0A Unit Id */
-#define PM_link_str_ptr 0x0C /* 0x0C Link Structure Array */
-#define PM_bootloader_1 0x0E /* 0x0E 1st Stage Boot Loader */
-#define PM_bootloader_2 0x10 /* 0x10 2nd Stage Boot Loader */
-#define PM_port_route_map_ptr 0x12 /* 0x12 Port Route Map */
-#define PM_route_ptr 0x14 /* 0x14 Route Map */
-#define PM_map_present 0x16 /* 0x16 Route Map present */
-#define PM_pkt_num 0x18 /* 0x18 Total number of packets */
-#define PM_q_num 0x1A /* 0x1A Total number of Q packets */
-#define PM_buffers_per_port 0x1C /* 0x1C Number of buffers per port */
-#define PM_heap_size 0x1E /* 0x1E Initial size of heap */
-#define PM_heap_left 0x20 /* 0x20 Current Heap left */
-#define PM_error 0x22 /* 0x22 Error code */
-#define PM_tx_max 0x24 /* 0x24 Max number of tx pkts per phb */
-#define PM_rx_max 0x26 /* 0x26 Max number of rx pkts per phb */
-#define PM_rx_limit 0x28 /* 0x28 For high / low watermarks */
-#define PM_links 0x2A /* 0x2A Links to use */
-#define PM_timer 0x2C /* 0x2C Interrupts per second */
-#define PM_rups 0x2E /* 0x2E Pointer to the RUPs */
-#define PM_max_phb 0x30 /* 0x30 Mostly for debugging */
-#define PM_living 0x32 /* 0x32 Just increments!! */
-#define PM_init_done 0x34 /* 0x34 Initialisation over */
-#define PM_booting_link 0x36 /* 0x36 */
-#define PM_idle_count 0x38 /* 0x38 Idle time counter */
-#define PM_busy_count 0x3A /* 0x3A Busy counter */
-#define PM_idle_control 0x3C /* 0x3C Control Idle Process */
-#define PM_tx_intr 0x3E /* 0x4E TX interrupt pending */
-#define PM_rx_intr 0x40 /* 0x40 RX interrupt pending */
-#define PM_rup_intr 0x42 /* 0x42 RUP interrupt pending */
-#define sizeof_PARM_MAP 0x44 /* structure size = 0x44 */
-
-/* PARM_MAP.error definitions... */
-#define E_NO_ERROR 0x00
-#define E_PROCESS_NOT_INIT 0x01
-#define E_LINK_TIMEOUT 0x02
-#define E_NO_ROUTE 0x03
-#define E_CONFUSED 0x04
-#define E_HOME 0x05
-#define E_CSUM_FAIL 0x06
-#define E_DISCONNECTED 0x07
-#define E_BAD_RUP 0x08
-#define E_NO_VIRGIN 0x09
-#define E_BOOT_RUP_BUSY 0x10
-#define E_CHANALLOC 0x80
-#define E_POLL_ALLOC 0x81
-#define E_LTTWAKE 0x82
-#define E_LTT_ALLOC 0x83
-#define E_LRT_ALLOC 0x84
-#define E_CIRRUS 0x85
-#define E_MONITOR 0x86
-#define E_PHB_ALLOC 0x87
-#define E_ARRAY_ALLOC 0x88
-#define E_QBUF_ALLOC 0x89
-#define E_PKT_ALLOC 0x8a
-#define E_GET_TX_Q_BUF 0x8b
-#define E_GET_RX_Q_BUF 0x8c
-#define E_MEM_OUT 0x8d
-#define E_MMU_INIT 0x8e
-#define E_LTT_INIT 0x8f
-#define E_LRT_INIT 0x90
-#define E_LINK_RUN 0x91
-#define E_MONITOR_ALLOC 0x92
-#define E_MONITOR_INIT 0x93
-#define E_POLL_INIT 0x94
-
-/* PARM_MAP.links definitions... */
-#define RIO_LINK_ENABLE 0x80FF
-
-/*****************************************************************************
-********************************** ***********************************
-********************************** RUP ***********************************
-********************************** ***********************************
-*****************************************************************************/
-
-/* The RUP (Remote Unit Port) structure relates to the Remote Terminal Adapters
- attached to the system and there is normally an array of MAX_RUPS (=16) structures
- in a host card, defined by PARM_MAP->rup. */
-
-typedef struct _RUP {
- _u16 txpkt; /* 0x00 Outgoing packet */
- _u16 rxpkt; /* 0x02 ncoming packet */
- _u16 link; /* 0x04 Which link to send packet down ? */
- _u8 rup_dest_unit[2]; /* 0x06 Destination Unit */
- _u16 handshake; /* 0x08 Handshaking */
- _u16 timeout; /* 0x0A Timeout */
- _u16 status; /* 0x0C Status */
- _u16 txcontrol; /* 0x0E Transmit control */
- _u16 rxcontrol; /* 0x10 Receive control */
-
-} RUP;
-
-/* Same thing again, but defined as offsets... */
-
-#define RUP_txpkt 0x00 /* 0x00 Outgoing packet */
-#define RUP_rxpkt 0x02 /* 0x02 Incoming packet */
-#define RUP_link 0x04 /* 0x04 Which link to send packet down ? */
-#define RUP_rup_dest_unit 0x06 /* 0x06 Destination Unit */
-#define RUP_handshake 0x08 /* 0x08 Handshaking */
-#define RUP_timeout 0x0A /* 0x0A Timeout */
-#define RUP_status 0x0C /* 0x0C Status */
-#define RUP_txcontrol 0x0E /* 0x0E Transmit control */
-#define RUP_rxcontrol 0x10 /* 0x10 Receive control */
-#define sizeof_RUP 0x12 /* structure size = 0x12 */
-
-#define MAX_RUP 16
-
-/* RUP.txcontrol definitions... */
-#define TX_RUP_INACTIVE 0 /* Nothing to transmit */
-#define TX_PACKET_READY 1 /* Transmit packet ready */
-#define TX_LOCK_RUP 2 /* Transmit side locked */
-
-/* RUP.txcontrol definitions... */
-#define RX_RUP_INACTIVE 0 /* Nothing received */
-#define RX_PACKET_READY 1 /* Packet received */
-
-#define RUP_NO_OWNER 0xFF /* RUP not owned by any process */
-
-/*****************************************************************************
-********************************** ***********************************
-********************************** PHB ***********************************
-********************************** ***********************************
-*****************************************************************************/
-
-/* The PHB (Port Header Block) structure relates to the serial ports attached
- to the system and there is normally an array of MAX_PHBS (=128) structures
- in a host card, defined by PARM_MAP->phb_ptr and PARM_MAP->phb_num_ptr. */
-
-typedef struct _PHB {
- _u16 source; /* 0x00 Location of the PHB in the host card */
- _u16 handshake; /* 0x02 Used to manage receive packet flow control */
- _u16 status; /* 0x04 Internal port transmit/receive status */
- _u16 timeout; /* 0x06 Time period to wait for an ACK */
- _u16 link; /* 0x08 The host link associated with the PHB */
- _u16 destination; /* 0x0A Location of the remote port on the network */
-
- _u16 tx_start; /* 0x0C first entry in the packet array for transmit packets */
- _u16 tx_end; /* 0x0E last entry in the packet array for transmit packets */
- _u16 tx_add; /* 0x10 position in the packet array for new transmit packets */
- _u16 tx_remove; /* 0x12 current position in the packet pointer array */
-
- _u16 rx_start; /* 0x14 first entry in the packet array for receive packets */
- _u16 rx_end; /* 0x16 last entry in the packet array for receive packets */
- _u16 rx_add; /* 0x18 position in the packet array for new receive packets */
- _u16 rx_remove; /* 0x1A current position in the packet pointer array */
-
-} PHB;
-
-/* Same thing again, but defined as offsets... */
-
-#define PHB_source 0x00 /* 0x00 Location of the PHB in the host card */
-#define PHB_handshake 0x02 /* 0x02 Used to manage receive packet flow control */
-#define PHB_status 0x04 /* 0x04 Internal port transmit/receive status */
-#define PHB_timeout 0x06 /* 0x06 Time period to wait for an ACK */
-#define PHB_link 0x08 /* 0x08 The host link associated with the PHB */
-#define PHB_destination 0x0A /* 0x0A Location of the remote port on the network */
-#define PHB_tx_start 0x0C /* 0x0C first entry in the packet array for transmit packets */
-#define PHB_tx_end 0x0E /* 0x0E last entry in the packet array for transmit packets */
-#define PHB_tx_add 0x10 /* 0x10 position in the packet array for new transmit packets */
-#define PHB_tx_remove 0x12 /* 0x12 current position in the packet pointer array */
-#define PHB_rx_start 0x14 /* 0x14 first entry in the packet array for receive packets */
-#define PHB_rx_end 0x16 /* 0x16 last entry in the packet array for receive packets */
-#define PHB_rx_add 0x18 /* 0x18 position in the packet array for new receive packets */
-#define PHB_rx_remove 0x1A /* 0x1A current position in the packet pointer array */
-#define sizeof_PHB 0x1C /* structure size = 0x1C */
-
-/* PHB.handshake definitions... */
-#define PHB_HANDSHAKE_SET 0x0001 /* Set by LRT */
-#define PHB_HANDSHAKE_RESET 0x0002 /* Set by ISR / driver */
-#define PHB_HANDSHAKE_FLAGS (PHB_HANDSHAKE_RESET|PHB_HANDSHAKE_SET)
- /* Reset by ltt */
-
-#define MAX_PHB 128 /* range 0-127 */
-
-/*****************************************************************************
-********************************** ***********************************
-********************************** LPB ***********************************
-********************************** ***********************************
-*****************************************************************************/
-
-/* The LPB (Link Parameter Block) structure relates to a RIO Network Link
- and there is normally an array of MAX_LINKS (=4) structures in a host card,
- defined by PARM_MAP->link_str_ptr. */
-
-typedef struct _LPB {
- _u16 link_number; /* 0x00 Link Number */
- _u16 in_ch; /* 0x02 Link In Channel */
- _u16 out_ch; /* 0x04 Link Out Channel */
- _u8 attached_serial[4]; /* 0x06 Attached serial number */
- _u8 attached_host_serial[4]; /* 0x0A Serial number of Host who booted other end */
- _u16 descheduled; /* 0x0E Currently Descheduled */
- _u16 state; /* 0x10 Current state */
- _u16 send_poll; /* 0x12 Send a Poll Packet */
- _u16 ltt_p; /* 0x14 Process Descriptor */
- _u16 lrt_p; /* 0x16 Process Descriptor */
- _u16 lrt_status; /* 0x18 Current lrt status */
- _u16 ltt_status; /* 0x1A Current ltt status */
- _u16 timeout; /* 0x1C Timeout value */
- _u16 topology; /* 0x1E Topology bits */
- _u16 mon_ltt; /* 0x20 */
- _u16 mon_lrt; /* 0x22 */
- _u16 num_pkts; /* 0x24 */
- _u16 add_packet_list; /* 0x26 Add packets to here */
- _u16 remove_packet_list; /* 0x28 Send packets from here */
-
- _u16 lrt_fail_chan; /* 0x2A Lrt's failure channel */
- _u16 ltt_fail_chan; /* 0x2C Ltt's failure channel */
-
- RUP rup; /* 0x2E RUP structure for HOST to driver comms */
- RUP link_rup; /* 0x40 RUP for the link (POLL, topology etc.) */
- _u16 attached_link; /* 0x52 Number of attached link */
- _u16 csum_errors; /* 0x54 csum errors */
- _u16 num_disconnects; /* 0x56 number of disconnects */
- _u16 num_sync_rcvd; /* 0x58 # sync's received */
- _u16 num_sync_rqst; /* 0x5A # sync requests */
- _u16 num_tx; /* 0x5C Num pkts sent */
- _u16 num_rx; /* 0x5E Num pkts received */
- _u16 module_attached; /* 0x60 Module tpyes of attached */
- _u16 led_timeout; /* 0x62 LED timeout */
- _u16 first_port; /* 0x64 First port to service */
- _u16 last_port; /* 0x66 Last port to service */
-
-} LPB;
-
-/* Same thing again, but defined as offsets... */
-
-#define LPB_link_number 0x00 /* 0x00 Link Number */
-#define LPB_in_ch 0x02 /* 0x02 Link In Channel */
-#define LPB_out_ch 0x04 /* 0x04 Link Out Channel */
-#define LPB_attached_serial 0x06 /* 0x06 Attached serial number */
-#define LPB_attached_host_serial 0x0A /* 0x0A Serial number of Host who booted other end */
-#define LPB_descheduled 0x0E /* 0x0E Currently Descheduled */
-#define LPB_state 0x10 /* 0x10 Current state */
-#define LPB_send_poll 0x12 /* 0x12 Send a Poll Packet */
-#define LPB_ltt_p 0x14 /* 0x14 Process Descriptor */
-#define LPB_lrt_p 0x16 /* 0x16 Process Descriptor */
-#define LPB_lrt_status 0x18 /* 0x18 Current lrt status */
-#define LPB_ltt_status 0x1A /* 0x1A Current ltt status */
-#define LPB_timeout 0x1C /* 0x1C Timeout value */
-#define LPB_topology 0x1E /* 0x1E Topology bits */
-#define LPB_mon_ltt 0x20 /* 0x20 */
-#define LPB_mon_lrt 0x22 /* 0x22 */
-#define LPB_num_pkts 0x24 /* 0x24 */
-#define LPB_add_packet_list 0x26 /* 0x26 Add packets to here */
-#define LPB_remove_packet_list 0x28 /* 0x28 Send packets from here */
-#define LPB_lrt_fail_chan 0x2A /* 0x2A Lrt's failure channel */
-#define LPB_ltt_fail_chan 0x2C /* 0x2C Ltt's failure channel */
-#define LPB_rup 0x2E /* 0x2E RUP structure for HOST to driver comms */
-#define LPB_link_rup 0x40 /* 0x40 RUP for the link (POLL, topology etc.) */
-#define LPB_attached_link 0x52 /* 0x52 Number of attached link */
-#define LPB_csum_errors 0x54 /* 0x54 csum errors */
-#define LPB_num_disconnects 0x56 /* 0x56 number of disconnects */
-#define LPB_num_sync_rcvd 0x58 /* 0x58 # sync's received */
-#define LPB_num_sync_rqst 0x5A /* 0x5A # sync requests */
-#define LPB_num_tx 0x5C /* 0x5C Num pkts sent */
-#define LPB_num_rx 0x5E /* 0x5E Num pkts received */
-#define LPB_module_attached 0x60 /* 0x60 Module tpyes of attached */
-#define LPB_led_timeout 0x62 /* 0x62 LED timeout */
-#define LPB_first_port 0x64 /* 0x64 First port to service */
-#define LPB_last_port 0x66 /* 0x66 Last port to service */
-#define sizeof_LPB 0x68 /* structure size = 0x68 */
-
-#define LINKS_PER_UNIT 4 /* number of links from a host */
-
-/*****************************************************************************
-******************************** *******************************
-******************************** FREE_LIST *******************************
-******************************** *******************************
-*****************************************************************************/
-
-/* Used to overlay packet headers when allocating/freeing packets from the free list */
-
-typedef struct _FREE_LIST {
- _u16 next; /* 0x00 offset of next list item */
- _u16 prev; /* 0x02 offset of previous list item */
-
-} FREE_LIST;
-
-/* Same thing again, but defined as offsets... */
-
-#define FL_next 0x00 /* 0x00 offset of next list item */
-#define FL_prev 0x02 /* 0x02 offset of previous list item */
-
-/*****************************************************************************
-********************************** ***********************************
-********************************** PKT ***********************************
-********************************** ***********************************
-*****************************************************************************/
-
-/* The PKT is the main unit of communication between Host Cards and RTAs across
- the RIO network. */
-
-#define PKT_MAX_DATA_LEN 72 /* Size of packet data */
-
-typedef struct _PKT {
- _u8 dest_unit; /* 0x00 Destination Unit Id */
- _u8 dest_port; /* 0x01 Destination Port */
- _u8 src_unit; /* 0x02 Source Unit Id */
- _u8 src_port; /* 0x03 Source Port */
- _u8 len; /* 0x04 Length (in bytes) of data field */
- _u8 control; /* 0x05 */
- _u8 data[PKT_MAX_DATA_LEN]; /* 0x06 Actual data */
- _u16 csum; /* 0x4E C-SUM */
-
-} PKT;
-
-/* Same thing again, but defined as offsets... */
-
-#define PKT_dest_unit 0x00 /* 0x00 Destination Unit Id */
-#define PKT_dest_port 0x01 /* 0x01 Destination Port */
-#define PKT_src_unit 0x02 /* 0x02 Source Unit Id */
-#define PKT_src_port 0x03 /* 0x03 Source Port */
-#define PKT_len 0x04 /* 0x04 Length (in bytes) of data field */
-#define PKT_control 0x05 /* 0x05 */
-#define PKT_data 0x06 /* 0x06 Actual data */
-#define PKT_csum 0x4E /* 0x4E C-SUM */
-#define sizeof_PKT 0x50 /* structure size = 0x50 */
-
-/* PKT.len definitions... */
-#define PKT_CMD_BIT 0x80
-#define PKT_CMD_DATA 0x80
-#define PKT_LEN_MASK 0x7F
-
-/* PKT.control definitions... */
-#define PKT_ACK 0x40
-#define PKT_TGL 0x20
-#define DATA_WNDW 0x10
-#define PKT_TTL_MASK 0x0F
-#define MAX_TTL 0x0F
-
-/*****************************************************************************
-***************************** ****************************
-***************************** Control Packets ****************************
-***************************** ****************************
-*****************************************************************************/
-
-/* The following definitions and structures define the control packets sent
- between the driver and RIO Ports, RTAs and Host Cards. */
-
-#define PRE_EMPTIVE 0x80 /* Pre-emptive command (sent via port's RUP) */
-
-/* "in-band" and "pre-emptive" port commands... */
-#define OPEN 0x00 /* Driver->RIO Open a port */
-#define CONFIG 0x01 /* Driver->RIO Configure a port */
-#define MOPEN 0x02 /* Driver->RIO Modem open (wait for DCD) */
-#define CLOSE 0x03 /* Driver->RIO Close a port */
-#define WFLUSH (0x04|PRE_EMPTIVE) /* Driver->RIO Write flush */
-#define RFLUSH (0x05|PRE_EMPTIVE) /* Driver->RIO Read flush */
-#define RESUME (0x06|PRE_EMPTIVE) /* Driver->RIO Behave as if XON received */
-#define SBREAK 0x07 /* Driver->RIO Start break */
-#define EBREAK 0x08 /* Driver->RIO End break */
-#define SUSPEND (0x09|PRE_EMPTIVE) /* Driver->RIO Behave as if XOFF received */
-#define FCLOSE (0x0A|PRE_EMPTIVE) /* Driver->RIO Force close */
-#define XPRINT 0x0B /* Driver->RIO Xprint packet */
-#define MBIS (0x0C|PRE_EMPTIVE) /* Driver->RIO Set modem lines */
-#define MBIC (0x0D|PRE_EMPTIVE) /* Driver->RIO Clear modem lines */
-#define MSET (0x0E|PRE_EMPTIVE) /* Driver->RIO Set modem lines */
-#define PCLOSE 0x0F /* Driver->RIO Pseudo close */
-#define MGET (0x10|PRE_EMPTIVE) /* Driver->RIO Force update of modem status */
-#define MEMDUMP (0x11|PRE_EMPTIVE) /* Driver->RIO DEBUG request for RTA memory */
-#define READ_REGISTER (0x12|PRE_EMPTIVE) /* Driver->RIO DEBUG read CD1400 register */
-
-/* Remote Unit Port (RUP) packet definitions... (specified in PKT.dest_unit and PKT.src_unit) */
-#define SYNC_RUP 0xFF /* Download internal */
-#define COMMAND_RUP 0xFE /* Command ack/status */
-#define ERROR_RUP 0xFD /* Download internal */
-#define POLL_RUP 0xFC /* Download internal */
-#define BOOT_RUP 0xFB /* Used to boot RTAs */
-#define ROUTE_RUP 0xFA /* Used to specify routing/topology */
-#define STATUS_RUP 0xF9 /* Not used */
-#define POWER_RUP 0xF8 /* Download internal */
-
-/* COMMAND_RUP definitions... */
-#define COMPLETE (0x20|PRE_EMPTIVE) /* RIO->Driver Command complete */
-#define BREAK_RECEIVED (0x21|PRE_EMPTIVE) /* RIO->Driver Break received */
-#define MODEM_STATUS (0x22|PRE_EMPTIVE) /* RIO->Driver Modem status change */
-
-/* BOOT_RUP definitions... */
-#define BOOT_REQUEST 0x00 /* RIO->Driver Request for boot */
-#define BOOT_ABORT 0x01 /* Driver->RIO Abort a boot */
-#define BOOT_SEQUENCE 0x02 /* Driver->RIO Packet with firmware details */
-#define BOOT_COMPLETED 0x03 /* RIO->Driver Boot completed */
-#define IFOAD 0x2F /* Driver->RIO Shutdown/Reboot RTA (Fall Over And Die) */
-#define IDENTIFY 0x30 /* Driver->RIO Identify RTA */
-#define ZOMBIE 0x31 /* Driver->RIO Shutdown/Flash LEDs */
-#define UFOAD 0x32 /* Driver->RIO Shutdown/Reboot neighbouring RTA */
-#define IWAIT 0x33 /* Driver->RIO Pause booting process */
-
-/* ROUTE_RUP definitions... */
-#define ROUTE_REQUEST 0x00 /* RIO->Driver Request an ID */
-#define ROUTE_FOAD 0x01 /* Driver->RIO Shutdown/reboot RTA */
-#define ROUTE_ALREADY 0x02 /* Driver->RIO Not used */
-#define ROUTE_USED 0x03 /* Driver->RIO Not used */
-#define ROUTE_ALLOCATE 0x04 /* Driver->RIO Allocate RTA RUP numbers */
-#define ROUTE_REQ_TOP 0x05 /* Driver->RIO Not used */
-#define ROUTE_TOPOLOGY 0x06 /* RIO->Driver Route/Topology status */
-
-/*****************************************************************************
-********************************** **********************************
-********************************** OPEN **********************************
-********************************** **********************************
-*****************************************************************************/
-
-/* (Driver->RIO,in-band)
-
- Sent to open a port.
- Structure of configuration info used with OPEN, CONFIG and MOPEN packets... */
-
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#define PKT_Cor1 (PKT_Data+1) /* Channel Option Register 1 */
-#define PKT_Cor2 (PKT_Data+2) /* Channel Option Register 2 */
-#define PKT_Cor4 (PKT_Data+3) /* Channel Option Register 4 */
-#define PKT_Cor5 (PKT_Data+4) /* Channel Option Register 5 */
-#define PKT_TxXon (PKT_Data+5) /* Transmit XON character */
-#define PKT_TxXoff (PKT_Data+6) /* Transmit XOFF character */
-#define PKT_RxXon (PKT_Data+7) /* Receive XON character */
-#define PKT_RxXoff (PKT_Data+8) /* Receive XOFF character */
-#define PKT_Lnext (PKT_Data+9) /* Lnext character */
-#define PKT_TxBaud (PKT_Data+10) /* Transmit baud rate */
-#define PKT_RxBaud (PKT_Data+11) /* Receive baud rate */
-
-/* COR1 definitions... */
-#define COR1_PARITY 0xE0 /* Parity mask */
-#define COR1_NONE 0x00 /* No parity */
-#define COR1_SPACE 0x20 /* Space parity */
-#define COR1_EVEN 0x40 /* Even parity */
-#define COR1_MARK 0xA0 /* Mark parity */
-#define COR1_ODD 0xC0 /* Odd parity */
-
-#define COR1_STOPBITS 0x0C /* Stop bits mask */
-#define COR1_STOP1 0x00 /* 1 stop bit */
-#define COR1_STOP1_5 0x04 /* 1.5 stop bits */
-#define COR1_STOP2 0x08 /* 2 stop bits */
-
-#define COR1_DATABITS 0x03 /* Data bits mask */
-#define COR1_DATA5 0x00 /* 5 data bits */
-#define COR1_DATA6 0x01 /* 6 data bits */
-#define COR1_DATA7 0x02 /* 7 data bits */
-#define COR1_DATA8 0x03 /* 8 data bits */
-
-/* COR2 definitions... */
-#define COR2_XON_TXFLOW 0x40 /* XON/XOFF Transmit Flow */
-#define COR2_XANY_TXFLOW 0xC0 /* XON/XANY Transmit Flow */
-#define COR2_HUPCL 0x20 /* Hang Up On Close */
-#define COR2_DSR_TXFLOW 0x08 /* DSR Transmit Flow Control */
-#define COR2_RTS_RXFLOW 0x04 /* RTS Receive Flow Control */
-#define COR2_CTS_TXFLOW 0x02 /* CTS Transmit Flow Control */
-#define COR2_XON_RXFLOW 0x01 /* XON/XOFF Receive Flow */
-
-/* COR4 definition... */
-#define COR4_IGNCR 0x80 /* Discard received CR */
-#define COR4_ICRNL 0x40 /* Map received CR -> NL */
-#define COR4_INLCR 0x20 /* Map received NL -> CR */
-#define COR4_IGNBRK 0x10 /* Ignore Received Break */
-#define COR4_NBRKINT 0x08 /* No interrupt on rx Break */
-#define COR4_IGNPAR 0x04 /* ignore rx parity error chars */
-#define COR4_PARMRK 0x02 /* Mark rx parity error chars */
-#define COR4_RAISEMOD 0x01 /* Raise modem lines on !0 baud */
-
-/* COR5 definitions... */
-#define COR5_ISTRIP 0x80 /* Strip input chars to 7 bits */
-#define COR5_LNE 0x40 /* Enable LNEXT processing */
-#define COR5_CMOE 0x20 /* Match good & error characters */
-#define COR5_TAB3 0x10 /* TAB3 mode */
-#define COR5_TSTATE_ON 0x08 /* Enable tbusy/tstop monitoring */
-#define COR5_TSTATE_OFF 0x04 /* Disable tbusy/tstop monitoring */
-#define COR5_ONLCR 0x02 /* NL -> CR NL on output */
-#define COR5_OCRNL 0x01 /* CR -> NL on output */
-
-/* RxBaud and TxBaud definitions... */
-#define RIO_B0 0x00 /* RTS / DTR signals dropped */
-#define RIO_B50 0x01 /* 50 baud */
-#define RIO_B75 0x02 /* 75 baud */
-#define RIO_B110 0x03 /* 110 baud */
-#define RIO_B134 0x04 /* 134.5 baud */
-#define RIO_B150 0x05 /* 150 baud */
-#define RIO_B200 0x06 /* 200 baud */
-#define RIO_B300 0x07 /* 300 baud */
-#define RIO_B600 0x08 /* 600 baud */
-#define RIO_B1200 0x09 /* 1200 baud */
-#define RIO_B1800 0x0A /* 1800 baud */
-#define RIO_B2400 0x0B /* 2400 baud */
-#define RIO_B4800 0x0C /* 4800 baud */
-#define RIO_B9600 0x0D /* 9600 baud */
-#define RIO_B19200 0x0E /* 19200 baud */
-#define RIO_B38400 0x0F /* 38400 baud */
-#define RIO_B56000 0x10 /* 56000 baud */
-#define RIO_B57600 0x11 /* 57600 baud */
-#define RIO_B64000 0x12 /* 64000 baud */
-#define RIO_B115200 0x13 /* 115200 baud */
-#define RIO_B2000 0x14 /* 2000 baud */
-
-/*****************************************************************************
-********************************* *********************************
-********************************* CONFIG *********************************
-********************************* *********************************
-*****************************************************************************/
-
-/* (Driver->RIO,in-band)
-
- CONFIG is sent from the driver to configure an already opened port.
- Packet structure is same as OPEN. */
-
-/*****************************************************************************
-********************************* **********************************
-********************************* MOPEN **********************************
-********************************* **********************************
-*****************************************************************************/
-
-/* (Driver->RIO,in-band)
-
- MOPEN is sent from the driver to open a port attached to a modem. (in-band)
- Packet structure is same as OPEN. */
-
-/*****************************************************************************
-********************************* **********************************
-********************************* CLOSE **********************************
-********************************* **********************************
-*****************************************************************************/
-
-/* (Driver->RIO,in-band)
-
- CLOSE is sent from the driver to close a previously opened port.
- No parameters.
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#endif
-/*****************************************************************************
-********************************* *********************************
-********************************* WFLUSH *********************************
-********************************* *********************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
- WFLUSH is sent pre-emptively from the driver to flush the write buffers and
- packets of a port. (pre-emptive)
-
- WFLUSH is also sent in-band from the driver to a port as a marker to end
- write flushing previously started by a pre-emptive WFLUSH packet. (in-band)
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#endif
-#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */
-
-/*****************************************************************************
-********************************* *********************************
-********************************* RFLUSH *********************************
-********************************* *********************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
- RFLUSH is sent pre-emptively from the driver to flush the read buffers and
- packets of a port.
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */
-#endif
-
-/*****************************************************************************
-********************************* *********************************
-********************************* RESUME *********************************
-********************************* *********************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
- RESUME is sent pre-emptively from the driver to cause a port to resume
- transmission of data if blocked by XOFF. (as if XON had been received)
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */
-#endif
-
-/*****************************************************************************
-********************************* *********************************
-********************************* SBREAK *********************************
-********************************* *********************************
-*****************************************************************************/
-
-/* (Driver->RIO,in-band)
-
- SBREAK is sent in-band from the driver to a port to suspend data and start
- break signal transmission.
-
- If the break delay is 0, the break signal will be acknowledged with a
- RUP_COMMAND, COMPLETE packet and continue until an EBREAK packet is received.
-
- Otherwise, there is no acknowledgement and the break signal will last for the
- specified number of mS.
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#endif
-#define PKT_BreakDelay (PKT_Data+1) /* Break delay in mS */
-
-/*****************************************************************************
-********************************* *********************************
-********************************* EBREAK *********************************
-********************************* *********************************
-*****************************************************************************/
-
-/* (Driver->RIO,in-band)
-
- EBREAK is sent in-band from the driver to a port to stop transmission of a
- break signal.
-
- No parameters. */
-
-/*****************************************************************************
-********************************* ********************************
-********************************* SUSPEND ********************************
-********************************* ********************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
- SUSPEND is sent pre-emptively from the driver to cause a port to suspend
- transmission of data. (as if XOFF had been received)
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */
-#endif
-
-/*****************************************************************************
-********************************* *********************************
-********************************* FCLOSE *********************************
-********************************* *********************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
- FCLOSE is sent pre-emptively from the driver to force close a port.
- A force close flushes receive and transmit queues, and also lowers all output
- modem signals if the COR5_HUPCL (Hang Up On Close) flag is set.
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */
-#endif
-
-/*****************************************************************************
-********************************* *********************************
-********************************* XPRINT *********************************
-********************************* *********************************
-*****************************************************************************/
-
-/* (Driver->RIO,in-band)
-
- XPRINT is sent as a normal I/O data packet except that the PKT_CMD_BIT of
- the "len" field is set, and the first "data" byte is XPRINT.
-
- The I/O data in the XPRINT packet will contain the following:
- - Transparent Print Start Sequence
- - Transparent Print Data
- - Transparent Print Stop Sequence.
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */
-#endif
-
-/*****************************************************************************
-********************************** **********************************
-********************************** MBIS **********************************
-********************************** **********************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
- MBIS is sent pre-emptively from the driver to set a port's modem signals.
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */
-#endif
-#define PKT_ModemSet (PKT_Data+4) /* Modem set signals mask */
-
-/* ModemSet definitions... */
-#define MBIS_RTS 0x01 /* RTS modem signal */
-#define MBIS_DTR 0x02 /* DTR modem signal */
-
-/*****************************************************************************
-********************************** **********************************
-********************************** MBIC **********************************
-********************************** **********************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
- MBIC is sent pre-emptively from the driver to clear a port's modem signals.
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */
-#endif
-
-#define PKT_ModemClear (PKT_Data+4) /* Modem clear signals mask */
-
-/* ModemClear definitions... */
-#define MBIC_RTS 0x01 /* RTS modem signal */
-#define MBIC_DTR 0x02 /* DTR modem signal */
-
-/*****************************************************************************
-********************************** **********************************
-********************************** MSET **********************************
-********************************** **********************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
- MSET is sent pre-emptively from the driver to set/clear a port's modem signals. */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */
-#endif
-
-#define PKT_ModemSet (PKT_Data+4) /* Modem set signals mask */
-
-/* ModemSet definitions... */
-#define MSET_RTS 0x01 /* RTS modem signal */
-#define MSET_DTR 0x02 /* DTR modem signal */
-
-/*****************************************************************************
-********************************* *********************************
-********************************* PCLOSE *********************************
-********************************* *********************************
-*****************************************************************************/
-
-/* (Driver->RIO,in-band)
-
- PCLOSE is sent from the driver to pseudo close a previously opened port.
-
- The port will close when all data has been sent/received, however, the
- port's transmit / receive and modem signals will be left enabled and the
- port marked internally as Pseudo Closed. */
-
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-
-/*****************************************************************************
-********************************** **********************************
-********************************** MGET **********************************
-********************************** **********************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
- MGET is sent pre-emptively from the driver to request the port's current modem signals. */
-
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */
-
-/*****************************************************************************
-********************************* ********************************
-********************************* MEMDUMP ********************************
-********************************* ********************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
- MEMDUMP is sent pre-emptively from the driver to request a dump of 32 bytes
- of the specified port's RTA address space.
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#endif
-#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */
-#define PKT_SubCmd (PKT_Data+5) /* Sub Command */
-#define PKT_Address (PKT_Data+6) /* Requested address */
-
-/*****************************************************************************
-****************************** *****************************
-****************************** READ_REGISTER *****************************
-****************************** *****************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
- READ_REGISTER is sent pre-emptively from the driver to request the contents
- of the CD1400 register specified in address.
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#endif
-#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */
-#define PKT_SubCmd (PKT_Data+5) /* Sub Command */
-#define PKT_Address (PKT_Data+6) /* Requested address */
-
-/*****************************************************************************
-************************ **************************
-************************ COMMAND_RUP - COMPLETE **************************
-************************ **************************
-*****************************************************************************/
-
-/* (RIO->Driver,pre-emptive)
-
- COMMAND_RUP - COMPLETE is sent in response to all port I/O control command
- packets, except MEMDUMP and READ_REGISTER.
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#endif
-#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */
-#define PKT_Cmd2 (PKT_Data+2) /* Command code copy */
-#define PKT_ModemStatus (PKT_Data+3) /* Modem signal status */
-#define PKT_PortStatus (PKT_Data+4) /* Port signal status */
-#define PKT_SubCmd (PKT_Data+5) /* Sub Command */
-
-/* ModemStatus definitions... */
-#define MODEM_DSR 0x80 /* Data Set Ready modem state */
-#define MODEM_CTS 0x40 /* Clear To Send modem state */
-#define MODEM_RI 0x20 /* Ring Indicate modem state */
-#define MODEM_CD 0x10 /* Carrier Detect modem state */
-#define MODEM_TSTOP 0x08 /* Transmit Stopped state */
-#define MODEM_TEMPTY 0x04 /* Transmit Empty state */
-#define MODEM_DTR 0x02 /* DTR modem output state */
-#define MODEM_RTS 0x01 /* RTS modem output state */
-
-/* PortStatus definitions... */
-#define PORT_ISOPEN 0x01 /* Port open ? */
-#define PORT_HUPCL 0x02 /* Hangup on close? */
-#define PORT_MOPENPEND 0x04 /* Modem open pending */
-#define PORT_ISPARALLEL 0x08 /* Parallel port */
-#define PORT_BREAK 0x10 /* Port on break */
-#define PORT_STATUSPEND 0020 /* Status packet pending */
-#define PORT_BREAKPEND 0x40 /* Break packet pending */
-#define PORT_MODEMPEND 0x80 /* Modem status packet pending */
-
-/*****************************************************************************
-************************ **************************
-************************ COMMAND_RUP - COMPLETE **************************
-************************ **************************
-*****************************************************************************/
-
-/* (RIO->Driver,pre-emptive)
-
- COMMAND_RUP - COMPLETE is sent in response to all port I/O control command
- packets, except MEMDUMP and READ_REGISTER.
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */
-#define PKT_Cmd2 (PKT_Data+2) /* Command code copy */
-#endif
-#define PKT_ModemStatus (PKT_Data+3) /* Modem signal status */
-#define PKT_PortStatus (PKT_Data+4) /* Port signal status */
-#if 0
-#define PKT_SubCmd (PKT_Data+5) /* Sub Command */
-#endif
-
-/* ModemStatus definitions... */
-#define MODEM_DSR 0x80 /* Data Set Ready modem state */
-#define MODEM_CTS 0x40 /* Clear To Send modem state */
-#define MODEM_RI 0x20 /* Ring Indicate modem state */
-#define MODEM_CD 0x10 /* Carrier Detect modem state */
-#define MODEM_TSTOP 0x08 /* Transmit Stopped state */
-#define MODEM_TEMPTY 0x04 /* Transmit Empty state */
-#define MODEM_DTR 0x02 /* DTR modem output state */
-#define MODEM_RTS 0x01 /* RTS modem output state */
-
-/* PortStatus definitions... */
-#define PORT_ISOPEN 0x01 /* Port open ? */
-#define PORT_HUPCL 0x02 /* Hangup on close? */
-#define PORT_MOPENPEND 0x04 /* Modem open pending */
-#define PORT_ISPARALLEL 0x08 /* Parallel port */
-#define PORT_BREAK 0x10 /* Port on break */
-#define PORT_STATUSPEND 0020 /* Status packet pending */
-#define PORT_BREAKPEND 0x40 /* Break packet pending */
-#define PORT_MODEMPEND 0x80 /* Modem status packet pending */
-
-/*****************************************************************************
-******************** ********************
-******************** COMMAND_RUP - COMPLETE - MEMDUMP ********************
-******************** ********************
-*****************************************************************************/
-
-/* (RIO->Driver,pre-emptive)
-
- COMMAND_RUP - COMPLETE - MEMDUMP is sent as an acknowledgement for a MEMDUMP
- port I/O control command packet.
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */
-#define PKT_Cmd2 (PKT_Data+2) /* Command code copy */
-#define PKT_ModemStatus (PKT_Data+3) /* Modem signal status */
-#define PKT_PortStatus (PKT_Data+4) /* Port signal status */
-#define PKT_SubCmd (PKT_Data+5) /* Sub Command */
-#define PKT_Address (PKT_Data+6) /* Requested address */
-#endif
-#define PKT_Dump (PKT_Data+8) /* 32bytes of requested dump data */
-
-/*****************************************************************************
-***************** *****************
-***************** COMMAND_RUP - COMPLETE - READ_REGISTER *****************
-***************** *****************
-*****************************************************************************/
-
-/* (RIO->Driver,pre-emptive)
-
- COMMAND_RUP - COMPLETE - READ_REGISTER is sent as an acknowledgement for a
- READ_REGISTER port I/O control command packet.
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /*Command code */
-#define PKT_PhbNum (PKT_Data+1) /*Port number wrt RTA */
-#define PKT_Cmd2 (PKT_Data+2) /* Command code copy */
-#endif
-#define PKT_RegisterValue (PKT_Data+3) /* Modem signal status */
-#if 0
-#define PKT_PortStatus (PKT_Data+4) /* Port signal status */
-#define PKT_SubCmd (PKT_Data+5) /* Sub Command */
-#endif
-
-/*****************************************************************************
-********************* ***********************
-********************* COMMAND_RUP - BREAK_RECEIVED ***********************
-********************* ***********************
-*****************************************************************************/
-
-/* (RIO->Driver,pre-emptive)
-
- COMMAND_RUP - BREAK_RECEIVED packets are sent when the port detects a receive BREAK signal.
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */
-#define PKT_Cmd2 (PKT_Data+2) /* Command code copy */
-#endif
-
-/*****************************************************************************
-********************* *************************
-********************* COMMAND_RUP - MODEM_STATUS *************************
-********************* *************************
-*****************************************************************************/
-
-/* (RIO->Driver,pre-emptive)
-
- COMMAND_RUP - MODEM_STATUS packets are sent whenever the port detects a
- change in the input modem signal states.
-
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */
-#define PKT_Cmd2 (PKT_Data+2) /* Command code copy */
-#define PKT_ModemStatus (PKT_Data+3) /* Modem signal status */
-#endif
-
-/*****************************************************************************
-************************ *************************
-************************ BOOT_RUP - BOOT_REQUEST *************************
-************************ *************************
-*****************************************************************************/
-
-/* (RIO->Driver,pre-emptive)
-
- BOOT_RUP - BOOT_REQUEST packets are sent to the Driver from RIO to request
- firmware code to load onto attached RTAs.
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#endif
-
-/*****************************************************************************
-************************ ************************
-************************ BOOT_RUP - BOOT_SEQUENCE ************************
-************************ ************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
- BOOT_RUP - BOOT_SEQUENCE packets are sent from the Driver to RIO in response
- to a BOOT_RUP - BOOT_REQUEST packet.
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#endif
-#define PKT_NumPackets (PKT_Data+2) /* Packets required to load firmware */
-#define PKT_LoadBase (PKT_Data+4) /* RTA firmware load address */
-#define PKT_CodeSize (PKT_Data+6) /* Size of firmware in bytes */
-#define PKT_CmdString (PKT_Data+8) /* Command string */
-
-/*****************************************************************************
-************************ ***********************
-************************ BOOT_RUP - BOOT_COMPLETED ***********************
-************************ ***********************
-*****************************************************************************/
-
-/* (RIO->Driver,pre-emptive)
-
- BOOT_RUP - BOOT_COMPLETE is sent to the Driver from RIO when downloading of
- RTA firmware has completed.
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#endif
-#define PKT_LinkNumber (PKT_Data+1) /* Link number RTA booted on */
-#define PKT_SerialNumber (PKT_Data+2) /* 4 byte serial number */
-
-/*****************************************************************************
-************************ ***********************
-************************ BOOT_RUP - Packet Request ***********************
-************************ ***********************
-*****************************************************************************/
-
-/* (RIO->Driver,pre-emptive)
-
- BOOT_RUP packet without the PKT_CMD_BIT set in the PKT->len field is sent
- from RIO to the Driver as a request for a firmware boot packet. */
-
-#define PKT_SequenceNumber (PKT_Data+0) /* Packet sequence number */
-
-/*****************************************************************************
-*********************** ***********************
-*********************** BOOT_RUP - Packet Response ***********************
-*********************** ***********************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
- In response to a BOOT_RUP boot packet request, the driver fills out the response
- packet with the 70 bytes of the requested sequence.
- */
-#if 0
-#define PKT_SequenceNumber (PKT_Data+0) /* Packet sequence number */
-#endif
-#define PKT_FirmwarePacket (PKT_Data+2) /* Firmware packet */
-
-/*****************************************************************************
-**************************** ****************************
-**************************** BOOT_RUP - IFOAD ****************************
-**************************** ****************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
- BOOT_RUP - IFOAD packets are sent from the Driver to an RTA to cause the
- RTA to shut down and reboot.
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#endif
-#define PKT_IfoadId1 (PKT_Data+2) /* IFOAD Id 1 */
-#define PKT_IfoadId2 (PKT_Data+3) /* IFOAD Id 2 */
-
-#define IFOADID1 0xAD
-#define IFOADID2 0xF0
-
-/*****************************************************************************
-************************** ***************************
-************************** BOOT_RUP - IDENTIFY ***************************
-************************** ***************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
- BOOT_RUP - IDENTIFY packets are sent from the Driver to an RTA to cause the
- RTA to flash its LEDs for a period of time.
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#endif
-#define PKT_IdentifyId (PKT_Data+2) /* defines pattern to flash */
-
-/*****************************************************************************
-**************************** ***************************
-**************************** BOOT_RUP - ZOMBIE ***************************
-**************************** ***************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
- BOOT_RUP - ZOMBIE packets are sent from the Driver to an RTA to cause the
- RTA to shut down and flash it's LEDs.
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#endif
-#define PKT_ZombieId1 (PKT_Data+2) /* ZOMBIE Id 1 */
-#define PKT_ZombieId2 (PKT_Data+3) /* ZOMBIE Id 2 */
-
-#define ZOMBIEID1 0x52
-#define ZOMBIEID2 0x21
-
-/*****************************************************************************
-**************************** ****************************
-**************************** BOOT_RUP - UFOAD ****************************
-**************************** ****************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
- BOOT_RUP - UFOAD packets are sent from the Driver to an RTA to cause the RTA
- to ask it's neighbouring RTA to shut down and reboot.
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#define PKT_LinkNumber (PKT_Data+1) /* Link number of RTA to UFOAD */
-#endif
-#define PKT_UfoadId1 (PKT_Data+2) /* UFOAD Id 1 */
-#define PKT_UfoadId2 (PKT_Data+3) /* UFOAD Id 2 */
-
-#define UFOADID1 0x1E
-#define UFOADID2 0x0D
-
-/*****************************************************************************
-**************************** ****************************
-**************************** BOOT_RUP - IWAIT ****************************
-**************************** ****************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
- BOOT_RUP - IWAIT packets are sent from the Driver to an RTA to cause the RTA
- to pause booting on the specified link for 30 seconds.
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#define PKT_LinkNumber (PKT_Data+1) /* Link number of RTA to UFOAD */
-#endif
-#define PKT_IwaitId1 (PKT_Data+2) /* IWAIT Id 1 */
-#define PKT_IwaitId2 (PKT_Data+3) /* IWAIT Id 2 */
-
-#define IWAITID1 0xDE
-#define IWAITID2 0xB1
-
-/*****************************************************************************
-************************ ***********************
-************************ ROUTE_RUP - ROUTE_REQUEST ***********************
-************************ ***********************
-*****************************************************************************/
-
-/* (RIO->Driver,pre-emptive)
-
- ROUTE_RUP - ROUTE_REQUEST packets are sent from a newly booted or connected
- RTA to a Driver to request an ID (RUP or unit number).
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#endif
-#define PKT_SerialNumber (PKT_Data+2) /* 4 byte serial number */
-#define PKT_ModuleTypes (PKT_Data+6) /* RTA Module types */
-
-/* ModuleTypes definitions... */
-#define MOD_BLANK 0x0F /* Blank plate attached */
-#define MOD_RS232DB25 0x00 /* RS232 DB25 connector */
-#define MOD_RS232RJ45 0x01 /* RS232 RJ45 connector */
-#define MOD_RS422DB25 0x02 /* RS422 DB25 connector */
-#define MOD_RS485DB25 0x03 /* RS485 DB25 connector */
-#define MOD_PARALLEL 0x04 /* Centronics parallel */
-
-#define MOD2 0x08 /* Set to indicate Rev2 module */
-
-/*****************************************************************************
-************************* *************************
-************************* ROUTE_RUP - ROUTE_FOAD *************************
-************************* *************************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
- ROUTE_RUP - ROUTE_FOAD packet is sent as a response to a ROUTE_RUP - ROUTE_REQUEST
- packet to cause the RTA to "Fall Over And Die"., i.e. shutdown and reboot.
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#endif
-#define PKT_RouteCmdString (PKT_Data+2) /* Command string */
-
-/*****************************************************************************
-*********************** ***********************
-*********************** ROUTE_RUP - ROUTE_ALLOCATE ***********************
-*********************** ***********************
-*****************************************************************************/
-
-/* (Driver->RIO,pre-emptive)
-
- ROUTE_RUP - ROUTE_ALLOCATE packet is sent as a response to a ROUTE_RUP - ROUTE_REQUEST
- packet to allocate the RTA's Id number (RUP number 1..16)
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#endif
-#define PKT_IdNum (PKT_Data+1) /* RUP number for ports 1..8 */
-#if 0
-#define PKT_RouteCmdString (PKT_Data+2) /* Command string */
-#endif
-#define PKT_IdNum2 (PKT_Data+0x17) /* RUP number for ports 9..16 */
-
-/*****************************************************************************
-*********************** ***********************
-*********************** ROUTE_RUP - ROUTE_TOPOLOGY ***********************
-*********************** ***********************
-*****************************************************************************/
-
-/* (RIO->Driver,pre-emptive)
-
- ROUTE_RUP - ROUTE_TOPOLOGY packet is sent to inform the driver of an RTA's
- current link status.
- */
-#if 0
-#define PKT_Cmd (PKT_Data+0) /* Command code */
-#endif
-#define PKT_Link1Rup (PKT_Data+2) /* Link 1 RUP number */
-#define PKT_Link1Link (PKT_Data+3) /* Link 1 link number */
-#define PKT_Link2Rup (PKT_Data+4) /* Link 2 RUP number */
-#define PKT_Link2Link (PKT_Data+5) /* Link 2 link number */
-#define PKT_Link3Rup (PKT_Data+6) /* Link 3 RUP number */
-#define PKT_Link3Link (PKT_Data+7) /* Link 3 link number */
-#define PKT_Link4Rup (PKT_Data+8) /* Link 4 RUP number */
-#define PKT_Link4Link (PKT_Data+9) /* Link 4 link number */
-#define PKT_RtaVpdProm (PKT_Data+10) /* 32 bytes of RTA VPD PROM Contents */
-
-#endif /* _sxwinif_h */
-
-/* End of RIOWINIF.H */
diff --git a/drivers/char/rio/riscos.h b/drivers/char/rio/riscos.h
deleted file mode 100644
index 60d66d0056ae..000000000000
--- a/drivers/char/rio/riscos.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
-** -----------------------------------------------------------------------------
-**
-** Perle Specialix driver for Linux
-** Ported from existing RIO Driver for SCO sources.
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-**
-** Module : riscos.h
-** SID : 1.2
-** Last Modified : 11/6/98 11:34:19
-** Retrieved : 11/6/98 11:34:22
-**
-** ident @(#)riscos.h 1.2
-**
-** -----------------------------------------------------------------------------
-*/
-
-#ifndef __rio_riscos_h__
-#define __rio_riscos_h__
-
-#ifdef SCCS_LABELS
-static char *_riscos_h_sccs_ = "@(#)riscos.h 1.2";
-#endif
-
-/*
-** This module used to define all those little itsy bits required for RISC/OS
-** now it's full of null macros.
-*/
-
-/*
-** RBYTE reads a byte from a location.
-** RWORD reads a word from a location.
-** WBYTE writes a byte to a location.
-** WWORD writes a word to a location.
-** RINDW reads a word through a pointer.
-** WINDW writes a word through a pointer.
-** RIOSWAB swaps the two bytes of a word, if needed.
-*/
-
-#define RIOSWAB(N) (N)
-#define WBYTE(A,V) (A)=(uchar)(V)
-#define WWORD(A,V) (A)=(ushort)(V)
-#define RBYTE(A) (uchar)(A)
-#define RWORD(A) (ushort)(A)
-#define RINDW(A) (*(ushort *)(A))
-#define WINDW(A,V) (*(ushort *)(A)=(ushort)(V))
-
-#endif /* __rio_riscos_h__ */
diff --git a/drivers/char/rio/rtahw.h b/drivers/char/rio/rtahw.h
deleted file mode 100644
index e6c2cdfd3a1f..000000000000
--- a/drivers/char/rio/rtahw.h
+++ /dev/null
@@ -1,75 +0,0 @@
-
-/****************************************************************************
- ******* *******
- ******* R T A H A R D W A R E
- ******* *******
- ****************************************************************************
-
- Author : Ian Nandhra
- Date :
-
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Version : 0.01
-
-
- Mods
- ----------------------------------------------------------------------------
- Date By Description
- ----------------------------------------------------------------------------
-
- ***************************************************************************/
-
-#ifndef lint
-#ifdef SCCS_LABELS
-static char *_rio_rtahw_h_sccs = "@(#)rtahw.h 1.5";
-#endif
-#endif
-
-#define WATCHDOG_ADDR ((unsigned short *)0x7a00)
-#define RTA_LED_ADDR ((unsigned short *)0x7c00)
-#define SERIALNUM_ADDR ((unsigned char *)0x7809)
-#define LATCH_ADDR ((unsigned char *)0x7800)
-
-/*
-** Here we define where the cd1400 chips are in memory.
-*/
-#define CD1400_ONE_ADDR (0x7300)
-#define CD1400_TWO_ADDR (0x7200)
-#define CD1400_THREE_ADDR (0x7100)
-#define CD1400_FOUR_ADDR (0x7000)
-
-/*
-** Define the different types of modules we can have
-*/
-enum module {
- MOD_BLANK = 0x0f, /* Blank plate attached */
- MOD_RS232DB25 = 0x00, /* RS232 DB25 connector */
- MOD_RS232RJ45 = 0x01, /* RS232 RJ45 connector */
- MOD_RS422DB25 = 0x02, /* RS422 DB25 connector */
- MOD_RS485DB25 = 0x03, /* RS485 DB25 connector */
- MOD_PARALLEL = 0x04 /* Centronics parallel */
-};
-
-#define TYPE_HOST 0
-#define TYPE_RTA8 1
-#define TYPE_RTA16 2
-
-#define WATCH_DOG WATCHDOG_ADDR
-
-/*********** end of file ***********/
diff --git a/drivers/char/rio/rupstat.h b/drivers/char/rio/rupstat.h
deleted file mode 100644
index 56d828c63d28..000000000000
--- a/drivers/char/rio/rupstat.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/****************************************************************************
- ******* *******
- ******* RUPSTAT
- ******* *******
- ****************************************************************************
-
- Author : Jeremy Rolls
- Date :
-
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Version : 0.01
-
-
- Mods
- ----------------------------------------------------------------------------
- Date By Description
- ----------------------------------------------------------------------------
-
- ***************************************************************************/
-
-#ifndef _rupstat_h
-#define _rupstat_h
-
-#ifndef lint
-#ifdef SCCS_LABELS
-static char *_rio_rupstat_h_sccs = "@(#)rupstat.h 1.1";
-#endif
-#endif
-
-#define STATUS_SYNC 0
-#define STATUS_REQ_TOP 1
-#define STATUS_TOPOLOGY 2
-
-#endif
diff --git a/drivers/char/rio/selftest.h b/drivers/char/rio/selftest.h
deleted file mode 100644
index 7a3dba352323..000000000000
--- a/drivers/char/rio/selftest.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
-** File: selftest.h
-**
-** Author: David Dix
-**
-** Created: 15th March 1993
-**
-** Last modified: 94/06/14
-**
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef _selftests_h_
-#define _selftests_h_
-
-/*
-** Selftest identifier...
-*/
-#define SELFTEST_MAGIC 0x5a5a
-
-/*
-** This is the structure of the packet that is sent back after each
-** selftest on a booting RTA.
-*/
-typedef struct {
- short magic; /* Identifies packet type */
- int test; /* Test number, see below */
- unsigned int result; /* Result value */
- unsigned int dataIn;
- unsigned int dataOut;
-} selftestStruct;
-
-/*
-** The different tests are identified by the following data values.
-*/
-enum test {
- TESTS_COMPLETE = 0x00,
- MEMTEST_ADDR = 0x01,
- MEMTEST_BIT = 0x02,
- MEMTEST_FILL = 0x03,
- MEMTEST_DATABUS = 0x04,
- MEMTEST_ADDRBUS = 0x05,
- CD1400_INIT = 0x10,
- CD1400_LOOP = 0x11,
- CD1400_INTERRUPT = 0x12
-};
-
-enum result {
- E_PORT = 0x10,
- E_TX = 0x11,
- E_RX = 0x12,
- E_EXCEPT = 0x13,
- E_COMPARE = 0x14,
- E_MODEM = 0x15,
- E_TIMEOUT = 0x16,
- E_INTERRUPT = 0x17
-};
-#endif /* _selftests_h_ */
diff --git a/drivers/char/rio/sysmap.h b/drivers/char/rio/sysmap.h
deleted file mode 100644
index e1c6f1160dff..000000000000
--- a/drivers/char/rio/sysmap.h
+++ /dev/null
@@ -1,62 +0,0 @@
-
-/****************************************************************************
- ******* *******
- ******* S Y S T E M M A P H E A D E R
- ******* *******
- ****************************************************************************
-
- Author : Ian Nandhra
- Date :
-
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Version : 0.01
-
-
- Mods
- ----------------------------------------------------------------------------
- Date By Description
- ----------------------------------------------------------------------------
-
- ***************************************************************************/
-
-#ifndef lint
-#ifdef SCCS_LABELS
-static char *_rio_sysmap_h_sccs = "@(#)sysmap.h 1.1";
-#endif
-#endif
-
-#define SYSTEM_MAP_LEN 64 /* Len of System Map array */
-
-
-typedef struct SYS_MAP SYS_MAP;
-typedef struct SYS_MAP_LINK SYS_MAP_LINK;
-
-struct SYS_MAP_LINK {
- short id; /* Unit Id */
- short link; /* Id's Link */
- short been_here; /* Used by map_gen */
-};
-
-struct SYS_MAP {
- char serial_num[4];
- SYS_MAP_LINK link[4];
-};
-
-
-/*********** end of file ***********/
diff --git a/drivers/char/rio/timeouts.h b/drivers/char/rio/timeouts.h
deleted file mode 100644
index a8b5be3ca9bf..000000000000
--- a/drivers/char/rio/timeouts.h
+++ /dev/null
@@ -1,50 +0,0 @@
-
-/****************************************************************************
- ******* *******
- ******* T I M E O U T S
- ******* *******
- ****************************************************************************
-
- Author : Ian Nandhra
- Date :
-
- *
- * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
- Version : 0.01
-
-
- Mods
- ----------------------------------------------------------------------------
- Date By Description
- ----------------------------------------------------------------------------
-
- ***************************************************************************/
-
-#ifndef lint
-#ifdef SCCS_LABELS
-static char *_rio_defaults_h_sccs = "@(#)timeouts.h 1.3";
-#endif
-#endif
-
-#define MILLISECOND (int) (1000/64) /* 15.625 low ticks */
-#define SECOND (int) 15625 /* Low priority ticks */
-
-#define TX_TIMEOUT (int) (200 * MILLISECOND)
-
-
-/*********** end of file ***********/
diff --git a/drivers/ieee1394/amdtp.c b/drivers/ieee1394/amdtp.c
deleted file mode 100644
index 17390d762cf7..000000000000
--- a/drivers/ieee1394/amdtp.c
+++ /dev/null
@@ -1,1297 +0,0 @@
-/* -*- c-basic-offset: 8 -*-
- *
- * amdtp.c - Audio and Music Data Transmission Protocol Driver
- * Copyright (C) 2001 Kristian Høgsberg
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-/* OVERVIEW
- * --------
- *
- * The AMDTP driver is designed to expose the IEEE1394 bus as a
- * regular OSS soundcard, i.e. you can link /dev/dsp to /dev/amdtp and
- * then your favourite MP3 player, game or whatever sound program will
- * output to an IEEE1394 isochronous channel. The signal destination
- * could be a set of IEEE1394 loudspeakers (if and when such things
- * become available) or an amplifier with IEEE1394 input (like the
- * Sony STR-LSA1). The driver only handles the actual streaming, some
- * connection management is also required for this to actually work.
- * That is outside the scope of this driver, and furthermore it is not
- * really standardized yet.
- *
- * The Audio and Music Data Tranmission Protocol is available at
- *
- * http://www.1394ta.org/Download/Technology/Specifications/2001/AM20Final-jf2.pdf
- *
- *
- * TODO
- * ----
- *
- * - We should be able to change input sample format between LE/BE, as
- * we already shift the bytes around when we construct the iso
- * packets.
- *
- * - Fix DMA stop after bus reset!
- *
- * - Clean up iso context handling in ohci1394.
- *
- *
- * MAYBE TODO
- * ----------
- *
- * - Receive data for local playback or recording. Playback requires
- * soft syncing with the sound card.
- *
- * - Signal processing, i.e. receive packets, do some processing, and
- * transmit them again using the same packet structure and timestamps
- * offset by processing time.
- *
- * - Maybe make an ALSA interface, that is, create a file_ops
- * implementation that recognizes ALSA ioctls and uses defaults for
- * things that can't be controlled through ALSA (iso channel).
- *
- * Changes:
- *
- * - Audit copy_from_user in amdtp_write.
- * Daniele Bellucci <bellucda@tiscali.it>
- *
- */
-
-#include <linux/module.h>
-#include <linux/list.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/fs.h>
-#include <linux/ioctl.h>
-#include <linux/wait.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/poll.h>
-#include <linux/compat.h>
-#include <linux/cdev.h>
-#include <asm/uaccess.h>
-#include <asm/atomic.h>
-
-#include "hosts.h"
-#include "highlevel.h"
-#include "ieee1394.h"
-#include "ieee1394_core.h"
-#include "ohci1394.h"
-
-#include "amdtp.h"
-#include "cmp.h"
-
-#define FMT_AMDTP 0x10
-#define FDF_AM824 0x00
-#define FDF_SFC_32KHZ 0x00
-#define FDF_SFC_44K1HZ 0x01
-#define FDF_SFC_48KHZ 0x02
-#define FDF_SFC_88K2HZ 0x03
-#define FDF_SFC_96KHZ 0x04
-#define FDF_SFC_176K4HZ 0x05
-#define FDF_SFC_192KHZ 0x06
-
-struct descriptor_block {
- struct output_more_immediate {
- u32 control;
- u32 pad0;
- u32 skip;
- u32 pad1;
- u32 header[4];
- } header_desc;
-
- struct output_last {
- u32 control;
- u32 data_address;
- u32 branch;
- u32 status;
- } payload_desc;
-};
-
-struct packet {
- struct descriptor_block *db;
- dma_addr_t db_bus;
- struct iso_packet *payload;
- dma_addr_t payload_bus;
-};
-
-#include <asm/byteorder.h>
-
-#if defined __BIG_ENDIAN_BITFIELD
-
-struct iso_packet {
- /* First quadlet */
- unsigned int dbs : 8;
- unsigned int eoh0 : 2;
- unsigned int sid : 6;
-
- unsigned int dbc : 8;
- unsigned int fn : 2;
- unsigned int qpc : 3;
- unsigned int sph : 1;
- unsigned int reserved : 2;
-
- /* Second quadlet */
- unsigned int fdf : 8;
- unsigned int eoh1 : 2;
- unsigned int fmt : 6;
-
- unsigned int syt : 16;
-
- quadlet_t data[0];
-};
-
-#elif defined __LITTLE_ENDIAN_BITFIELD
-
-struct iso_packet {
- /* First quadlet */
- unsigned int sid : 6;
- unsigned int eoh0 : 2;
- unsigned int dbs : 8;
-
- unsigned int reserved : 2;
- unsigned int sph : 1;
- unsigned int qpc : 3;
- unsigned int fn : 2;
- unsigned int dbc : 8;
-
- /* Second quadlet */
- unsigned int fmt : 6;
- unsigned int eoh1 : 2;
- unsigned int fdf : 8;
-
- unsigned int syt : 16;
-
- quadlet_t data[0];
-};
-
-#else
-
-#error Unknown bitfield type
-
-#endif
-
-struct fraction {
- int integer;
- int numerator;
- int denominator;
-};
-
-#define PACKET_LIST_SIZE 256
-#define MAX_PACKET_LISTS 4
-
-struct packet_list {
- struct list_head link;
- int last_cycle_count;
- struct packet packets[PACKET_LIST_SIZE];
-};
-
-#define BUFFER_SIZE 128
-
-/* This implements a circular buffer for incoming samples. */
-
-struct buffer {
- size_t head, tail, length, size;
- unsigned char data[0];
-};
-
-struct stream {
- int iso_channel;
- int format;
- int rate;
- int dimension;
- int fdf;
- int mode;
- int sample_format;
- struct cmp_pcr *opcr;
-
- /* Input samples are copied here. */
- struct buffer *input;
-
- /* ISO Packer state */
- unsigned char dbc;
- struct packet_list *current_packet_list;
- int current_packet;
- struct fraction ready_samples, samples_per_cycle;
-
- /* We use these to generate control bits when we are packing
- * iec958 data.
- */
- int iec958_frame_count;
- int iec958_rate_code;
-
- /* The cycle_count and cycle_offset fields are used for the
- * synchronization timestamps (syt) in the cip header. They
- * are incremented by at least a cycle every time we put a
- * time stamp in a packet. As we don't time stamp all
- * packages, cycle_count isn't updated in every cycle, and
- * sometimes it's incremented by 2. Thus, we have
- * cycle_count2, which is simply incremented by one with each
- * packet, so we can compare it to the transmission time
- * written back in the dma programs.
- */
- atomic_t cycle_count, cycle_count2;
- struct fraction cycle_offset, ticks_per_syt_offset;
- int syt_interval;
- int stale_count;
-
- /* Theses fields control the sample output to the DMA engine.
- * The dma_packet_lists list holds packet lists currently
- * queued for dma; the head of the list is currently being
- * processed. The last program in a packet list generates an
- * interrupt, which removes the head from dma_packet_lists and
- * puts it back on the free list.
- */
- struct list_head dma_packet_lists;
- struct list_head free_packet_lists;
- wait_queue_head_t packet_list_wait;
- spinlock_t packet_list_lock;
- struct ohci1394_iso_tasklet iso_tasklet;
- struct pci_pool *descriptor_pool, *packet_pool;
-
- /* Streams at a host controller are chained through this field. */
- struct list_head link;
- struct amdtp_host *host;
-};
-
-struct amdtp_host {
- struct hpsb_host *host;
- struct ti_ohci *ohci;
- struct list_head stream_list;
- spinlock_t stream_list_lock;
-};
-
-static struct hpsb_highlevel amdtp_highlevel;
-
-
-/* FIXME: This doesn't belong here... */
-
-#define OHCI1394_CONTEXT_CYCLE_MATCH 0x80000000
-#define OHCI1394_CONTEXT_RUN 0x00008000
-#define OHCI1394_CONTEXT_WAKE 0x00001000
-#define OHCI1394_CONTEXT_DEAD 0x00000800
-#define OHCI1394_CONTEXT_ACTIVE 0x00000400
-
-static void ohci1394_start_it_ctx(struct ti_ohci *ohci, int ctx,
- dma_addr_t first_cmd, int z, int cycle_match)
-{
- reg_write(ohci, OHCI1394_IsoXmitIntMaskSet, 1 << ctx);
- reg_write(ohci, OHCI1394_IsoXmitCommandPtr + ctx * 16, first_cmd | z);
- reg_write(ohci, OHCI1394_IsoXmitContextControlClear + ctx * 16, ~0);
- wmb();
- reg_write(ohci, OHCI1394_IsoXmitContextControlSet + ctx * 16,
- OHCI1394_CONTEXT_CYCLE_MATCH | (cycle_match << 16) |
- OHCI1394_CONTEXT_RUN);
-}
-
-static void ohci1394_wake_it_ctx(struct ti_ohci *ohci, int ctx)
-{
- reg_write(ohci, OHCI1394_IsoXmitContextControlSet + ctx * 16,
- OHCI1394_CONTEXT_WAKE);
-}
-
-static void ohci1394_stop_it_ctx(struct ti_ohci *ohci, int ctx, int synchronous)
-{
- u32 control;
- int wait;
-
- reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 1 << ctx);
- reg_write(ohci, OHCI1394_IsoXmitContextControlClear + ctx * 16,
- OHCI1394_CONTEXT_RUN);
- wmb();
-
- if (synchronous) {
- for (wait = 0; wait < 5; wait++) {
- control = reg_read(ohci, OHCI1394_IsoXmitContextControlSet + ctx * 16);
- if ((control & OHCI1394_CONTEXT_ACTIVE) == 0)
- break;
-
- schedule_timeout_interruptible(1);
- }
- }
-}
-
-/* Note: we can test if free_packet_lists is empty without aquiring
- * the packet_list_lock. The interrupt handler only adds to the free
- * list, there is no race condition between testing the list non-empty
- * and acquiring the lock.
- */
-
-static struct packet_list *stream_get_free_packet_list(struct stream *s)
-{
- struct packet_list *pl;
- unsigned long flags;
-
- if (list_empty(&s->free_packet_lists))
- return NULL;
-
- spin_lock_irqsave(&s->packet_list_lock, flags);
- pl = list_entry(s->free_packet_lists.next, struct packet_list, link);
- list_del(&pl->link);
- spin_unlock_irqrestore(&s->packet_list_lock, flags);
-
- return pl;
-}
-
-static void stream_start_dma(struct stream *s, struct packet_list *pl)
-{
- u32 syt_cycle, cycle_count, start_cycle;
-
- cycle_count = reg_read(s->host->ohci,
- OHCI1394_IsochronousCycleTimer) >> 12;
- syt_cycle = (pl->last_cycle_count - PACKET_LIST_SIZE + 1) & 0x0f;
-
- /* We program the DMA controller to start transmission at
- * least 17 cycles from now - this happens when the lower four
- * bits of cycle_count is 0x0f and syt_cycle is 0, in this
- * case the start cycle is cycle_count - 15 + 32. */
- start_cycle = (cycle_count & ~0x0f) + 32 + syt_cycle;
- if ((start_cycle & 0x1fff) >= 8000)
- start_cycle = start_cycle - 8000 + 0x2000;
-
- ohci1394_start_it_ctx(s->host->ohci, s->iso_tasklet.context,
- pl->packets[0].db_bus, 3,
- start_cycle & 0x7fff);
-}
-
-static void stream_put_dma_packet_list(struct stream *s,
- struct packet_list *pl)
-{
- unsigned long flags;
- struct packet_list *prev;
-
- /* Remember the cycle_count used for timestamping the last packet. */
- pl->last_cycle_count = atomic_read(&s->cycle_count2) - 1;
- pl->packets[PACKET_LIST_SIZE - 1].db->payload_desc.branch = 0;
-
- spin_lock_irqsave(&s->packet_list_lock, flags);
- list_add_tail(&pl->link, &s->dma_packet_lists);
- spin_unlock_irqrestore(&s->packet_list_lock, flags);
-
- prev = list_entry(pl->link.prev, struct packet_list, link);
- if (pl->link.prev != &s->dma_packet_lists) {
- struct packet *last = &prev->packets[PACKET_LIST_SIZE - 1];
- last->db->payload_desc.branch = pl->packets[0].db_bus | 3;
- last->db->header_desc.skip = pl->packets[0].db_bus | 3;
- ohci1394_wake_it_ctx(s->host->ohci, s->iso_tasklet.context);
- }
- else
- stream_start_dma(s, pl);
-}
-
-static void stream_shift_packet_lists(unsigned long l)
-{
- struct stream *s = (struct stream *) l;
- struct packet_list *pl;
- struct packet *last;
- int diff;
-
- if (list_empty(&s->dma_packet_lists)) {
- HPSB_ERR("empty dma_packet_lists in %s", __FUNCTION__);
- return;
- }
-
- /* Now that we know the list is non-empty, we can get the head
- * of the list without locking, because the process context
- * only adds to the tail.
- */
- pl = list_entry(s->dma_packet_lists.next, struct packet_list, link);
- last = &pl->packets[PACKET_LIST_SIZE - 1];
-
- /* This is weird... if we stop dma processing in the middle of
- * a packet list, the dma context immediately generates an
- * interrupt if we enable it again later. This only happens
- * when amdtp_release is interrupted while waiting for dma to
- * complete, though. Anyway, we detect this by seeing that
- * the status of the dma descriptor that we expected an
- * interrupt from is still 0.
- */
- if (last->db->payload_desc.status == 0) {
- HPSB_INFO("weird interrupt...");
- return;
- }
-
- /* If the last descriptor block does not specify a branch
- * address, we have a sample underflow.
- */
- if (last->db->payload_desc.branch == 0)
- HPSB_INFO("FIXME: sample underflow...");
-
- /* Here we check when (which cycle) the last packet was sent
- * and compare it to what the iso packer was using at the
- * time. If there is a mismatch, we adjust the cycle count in
- * the iso packer. However, there are still up to
- * MAX_PACKET_LISTS packet lists queued with bad time stamps,
- * so we disable time stamp monitoring for the next
- * MAX_PACKET_LISTS packet lists.
- */
- diff = (last->db->payload_desc.status - pl->last_cycle_count) & 0xf;
- if (diff > 0 && s->stale_count == 0) {
- atomic_add(diff, &s->cycle_count);
- atomic_add(diff, &s->cycle_count2);
- s->stale_count = MAX_PACKET_LISTS;
- }
-
- if (s->stale_count > 0)
- s->stale_count--;
-
- /* Finally, we move the packet list that was just processed
- * back to the free list, and notify any waiters.
- */
- spin_lock(&s->packet_list_lock);
- list_del(&pl->link);
- list_add_tail(&pl->link, &s->free_packet_lists);
- spin_unlock(&s->packet_list_lock);
-
- wake_up_interruptible(&s->packet_list_wait);
-}
-
-static struct packet *stream_current_packet(struct stream *s)
-{
- if (s->current_packet_list == NULL &&
- (s->current_packet_list = stream_get_free_packet_list(s)) == NULL)
- return NULL;
-
- return &s->current_packet_list->packets[s->current_packet];
-}
-
-static void stream_queue_packet(struct stream *s)
-{
- s->current_packet++;
- if (s->current_packet == PACKET_LIST_SIZE) {
- stream_put_dma_packet_list(s, s->current_packet_list);
- s->current_packet_list = NULL;
- s->current_packet = 0;
- }
-}
-
-/* Integer fractional math. When we transmit a 44k1Hz signal we must
- * send 5 41/80 samples per isochronous cycle, as these occur 8000
- * times a second. Of course, we must send an integral number of
- * samples in a packet, so we use the integer math to alternate
- * between sending 5 and 6 samples per packet.
- */
-
-static void fraction_init(struct fraction *f, int numerator, int denominator)
-{
- f->integer = numerator / denominator;
- f->numerator = numerator % denominator;
- f->denominator = denominator;
-}
-
-static __inline__ void fraction_add(struct fraction *dst,
- struct fraction *src1,
- struct fraction *src2)
-{
- /* assert: src1->denominator == src2->denominator */
-
- int sum, denom;
-
- /* We use these two local variables to allow gcc to optimize
- * the division and the modulo into only one division. */
-
- sum = src1->numerator + src2->numerator;
- denom = src1->denominator;
- dst->integer = src1->integer + src2->integer + sum / denom;
- dst->numerator = sum % denom;
- dst->denominator = denom;
-}
-
-static __inline__ void fraction_sub_int(struct fraction *dst,
- struct fraction *src, int integer)
-{
- dst->integer = src->integer - integer;
- dst->numerator = src->numerator;
- dst->denominator = src->denominator;
-}
-
-static __inline__ int fraction_floor(struct fraction *frac)
-{
- return frac->integer;
-}
-
-static __inline__ int fraction_ceil(struct fraction *frac)
-{
- return frac->integer + (frac->numerator > 0 ? 1 : 0);
-}
-
-static void packet_initialize(struct packet *p, struct packet *next)
-{
- /* Here we initialize the dma descriptor block for
- * transferring one iso packet. We use two descriptors per
- * packet: an OUTPUT_MORE_IMMMEDIATE descriptor for the
- * IEEE1394 iso packet header and an OUTPUT_LAST descriptor
- * for the payload.
- */
-
- p->db->header_desc.control =
- DMA_CTL_OUTPUT_MORE | DMA_CTL_IMMEDIATE | 8;
-
- if (next) {
- p->db->payload_desc.control =
- DMA_CTL_OUTPUT_LAST | DMA_CTL_BRANCH;
- p->db->payload_desc.branch = next->db_bus | 3;
- p->db->header_desc.skip = next->db_bus | 3;
- }
- else {
- p->db->payload_desc.control =
- DMA_CTL_OUTPUT_LAST | DMA_CTL_BRANCH |
- DMA_CTL_UPDATE | DMA_CTL_IRQ;
- p->db->payload_desc.branch = 0;
- p->db->header_desc.skip = 0;
- }
- p->db->payload_desc.data_address = p->payload_bus;
- p->db->payload_desc.status = 0;
-}
-
-static struct packet_list *packet_list_alloc(struct stream *s)
-{
- int i;
- struct packet_list *pl;
- struct packet *next;
-
- pl = kmalloc(sizeof *pl, SLAB_KERNEL);
- if (pl == NULL)
- return NULL;
-
- for (i = 0; i < PACKET_LIST_SIZE; i++) {
- struct packet *p = &pl->packets[i];
- p->db = pci_pool_alloc(s->descriptor_pool, SLAB_KERNEL,
- &p->db_bus);
- p->payload = pci_pool_alloc(s->packet_pool, SLAB_KERNEL,
- &p->payload_bus);
- }
-
- for (i = 0; i < PACKET_LIST_SIZE; i++) {
- if (i < PACKET_LIST_SIZE - 1)
- next = &pl->packets[i + 1];
- else
- next = NULL;
- packet_initialize(&pl->packets[i], next);
- }
-
- return pl;
-}
-
-static void packet_list_free(struct packet_list *pl, struct stream *s)
-{
- int i;
-
- for (i = 0; i < PACKET_LIST_SIZE; i++) {
- struct packet *p = &pl->packets[i];
- pci_pool_free(s->descriptor_pool, p->db, p->db_bus);
- pci_pool_free(s->packet_pool, p->payload, p->payload_bus);
- }
- kfree(pl);
-}
-
-static struct buffer *buffer_alloc(int size)
-{
- struct buffer *b;
-
- b = kmalloc(sizeof *b + size, SLAB_KERNEL);
- if (b == NULL)
- return NULL;
- b->head = 0;
- b->tail = 0;
- b->length = 0;
- b->size = size;
-
- return b;
-}
-
-static unsigned char *buffer_get_bytes(struct buffer *buffer, int size)
-{
- unsigned char *p;
-
- if (buffer->head + size > buffer->size)
- BUG();
-
- p = &buffer->data[buffer->head];
- buffer->head += size;
- if (buffer->head == buffer->size)
- buffer->head = 0;
- buffer->length -= size;
-
- return p;
-}
-
-static unsigned char *buffer_put_bytes(struct buffer *buffer,
- size_t max, size_t *actual)
-{
- size_t length;
- unsigned char *p;
-
- p = &buffer->data[buffer->tail];
- length = min(buffer->size - buffer->length, max);
- if (buffer->tail + length < buffer->size) {
- *actual = length;
- buffer->tail += length;
- }
- else {
- *actual = buffer->size - buffer->tail;
- buffer->tail = 0;
- }
-
- buffer->length += *actual;
- return p;
-}
-
-static u32 get_iec958_header_bits(struct stream *s, int sub_frame, u32 sample)
-{
- int csi, parity, shift;
- int block_start;
- u32 bits;
-
- switch (s->iec958_frame_count) {
- case 1:
- csi = s->format == AMDTP_FORMAT_IEC958_AC3;
- break;
- case 2:
- case 9:
- csi = 1;
- break;
- case 24 ... 27:
- csi = (s->iec958_rate_code >> (27 - s->iec958_frame_count)) & 0x01;
- break;
- default:
- csi = 0;
- break;
- }
-
- block_start = (s->iec958_frame_count == 0 && sub_frame == 0);
-
- /* The parity bit is the xor of the sample bits and the
- * channel status info bit. */
- for (shift = 16, parity = sample ^ csi; shift > 0; shift >>= 1)
- parity ^= (parity >> shift);
-
- bits = (block_start << 5) | /* Block start bit */
- ((sub_frame == 0) << 4) | /* Subframe bit */
- ((parity & 1) << 3) | /* Parity bit */
- (csi << 2); /* Channel status info bit */
-
- return bits;
-}
-
-static u32 get_header_bits(struct stream *s, int sub_frame, u32 sample)
-{
- switch (s->format) {
- case AMDTP_FORMAT_IEC958_PCM:
- case AMDTP_FORMAT_IEC958_AC3:
- return get_iec958_header_bits(s, sub_frame, sample);
-
- case AMDTP_FORMAT_RAW:
- return 0x40;
-
- default:
- return 0;
- }
-}
-
-static void fill_payload_le16(struct stream *s, quadlet_t *data, int nevents)
-{
- quadlet_t *event, sample, bits;
- unsigned char *p;
- int i, j;
-
- for (i = 0, event = data; i < nevents; i++) {
-
- for (j = 0; j < s->dimension; j++) {
- p = buffer_get_bytes(s->input, 2);
- sample = (p[1] << 16) | (p[0] << 8);
- bits = get_header_bits(s, j, sample);
- event[j] = cpu_to_be32((bits << 24) | sample);
- }
-
- event += s->dimension;
- if (++s->iec958_frame_count == 192)
- s->iec958_frame_count = 0;
- }
-}
-
-static void fill_packet(struct stream *s, struct packet *packet, int nevents)
-{
- int syt_index, syt, size;
- u32 control;
-
- size = (nevents * s->dimension + 2) * sizeof(quadlet_t);
-
- /* Update DMA descriptors */
- packet->db->payload_desc.status = 0;
- control = packet->db->payload_desc.control & 0xffff0000;
- packet->db->payload_desc.control = control | size;
-
- /* Fill IEEE1394 headers */
- packet->db->header_desc.header[0] =
- (IEEE1394_SPEED_100 << 16) | (0x01 << 14) |
- (s->iso_channel << 8) | (TCODE_ISO_DATA << 4);
- packet->db->header_desc.header[1] = size << 16;
-
- /* Calculate synchronization timestamp (syt). First we
- * determine syt_index, that is, the index in the packet of
- * the sample for which the timestamp is valid. */
- syt_index = (s->syt_interval - s->dbc) & (s->syt_interval - 1);
- if (syt_index < nevents) {
- syt = ((atomic_read(&s->cycle_count) << 12) |
- s->cycle_offset.integer) & 0xffff;
- fraction_add(&s->cycle_offset,
- &s->cycle_offset, &s->ticks_per_syt_offset);
-
- /* This next addition should be modulo 8000 (0x1f40),
- * but we only use the lower 4 bits of cycle_count, so
- * we don't need the modulo. */
- atomic_add(s->cycle_offset.integer / 3072, &s->cycle_count);
- s->cycle_offset.integer %= 3072;
- }
- else
- syt = 0xffff;
-
- atomic_inc(&s->cycle_count2);
-
- /* Fill cip header */
- packet->payload->eoh0 = 0;
- packet->payload->sid = s->host->host->node_id & 0x3f;
- packet->payload->dbs = s->dimension;
- packet->payload->fn = 0;
- packet->payload->qpc = 0;
- packet->payload->sph = 0;
- packet->payload->reserved = 0;
- packet->payload->dbc = s->dbc;
- packet->payload->eoh1 = 2;
- packet->payload->fmt = FMT_AMDTP;
- packet->payload->fdf = s->fdf;
- packet->payload->syt = cpu_to_be16(syt);
-
- switch (s->sample_format) {
- case AMDTP_INPUT_LE16:
- fill_payload_le16(s, packet->payload->data, nevents);
- break;
- }
-
- s->dbc += nevents;
-}
-
-static void stream_flush(struct stream *s)
-{
- struct packet *p;
- int nevents;
- struct fraction next;
-
- /* The AMDTP specifies two transmission modes: blocking and
- * non-blocking. In blocking mode you always transfer
- * syt_interval or zero samples, whereas in non-blocking mode
- * you send as many samples as you have available at transfer
- * time.
- *
- * The fraction samples_per_cycle specifies the number of
- * samples that become available per cycle. We add this to
- * the fraction ready_samples, which specifies the number of
- * leftover samples from the previous transmission. The sum,
- * stored in the fraction next, specifies the number of
- * samples available for transmission, and from this we
- * determine the number of samples to actually transmit.
- */
-
- while (1) {
- fraction_add(&next, &s->ready_samples, &s->samples_per_cycle);
- if (s->mode == AMDTP_MODE_BLOCKING) {
- if (fraction_floor(&next) >= s->syt_interval)
- nevents = s->syt_interval;
- else
- nevents = 0;
- }
- else
- nevents = fraction_floor(&next);
-
- p = stream_current_packet(s);
- if (s->input->length < nevents * s->dimension * 2 || p == NULL)
- break;
-
- fill_packet(s, p, nevents);
- stream_queue_packet(s);
-
- /* Now that we have successfully queued the packet for
- * transmission, we update the fraction ready_samples. */
- fraction_sub_int(&s->ready_samples, &next, nevents);
- }
-}
-
-static int stream_alloc_packet_lists(struct stream *s)
-{
- int max_nevents, max_packet_size, i;
-
- if (s->mode == AMDTP_MODE_BLOCKING)
- max_nevents = s->syt_interval;
- else
- max_nevents = fraction_ceil(&s->samples_per_cycle);
-
- max_packet_size = max_nevents * s->dimension * 4 + 8;
- s->packet_pool = pci_pool_create("packet pool", s->host->ohci->dev,
- max_packet_size, 0, 0);
-
- if (s->packet_pool == NULL)
- return -1;
-
- INIT_LIST_HEAD(&s->free_packet_lists);
- INIT_LIST_HEAD(&s->dma_packet_lists);
- for (i = 0; i < MAX_PACKET_LISTS; i++) {
- struct packet_list *pl = packet_list_alloc(s);
- if (pl == NULL)
- break;
- list_add_tail(&pl->link, &s->free_packet_lists);
- }
-
- return i < MAX_PACKET_LISTS ? -1 : 0;
-}
-
-static void stream_free_packet_lists(struct stream *s)
-{
- struct packet_list *packet_l, *packet_l_next;
-
- if (s->current_packet_list != NULL)
- packet_list_free(s->current_packet_list, s);
- list_for_each_entry_safe(packet_l, packet_l_next, &s->dma_packet_lists, link)
- packet_list_free(packet_l, s);
- list_for_each_entry_safe(packet_l, packet_l_next, &s->free_packet_lists, link)
- packet_list_free(packet_l, s);
- if (s->packet_pool != NULL)
- pci_pool_destroy(s->packet_pool);
-
- s->current_packet_list = NULL;
- INIT_LIST_HEAD(&s->free_packet_lists);
- INIT_LIST_HEAD(&s->dma_packet_lists);
- s->packet_pool = NULL;
-}
-
-static void plug_update(struct cmp_pcr *plug, void *data)
-{
- struct stream *s = data;
-
- HPSB_INFO("plug update: p2p_count=%d, channel=%d",
- plug->p2p_count, plug->channel);
- s->iso_channel = plug->channel;
- if (plug->p2p_count > 0) {
- struct packet_list *pl;
-
- pl = list_entry(s->dma_packet_lists.next, struct packet_list, link);
- stream_start_dma(s, pl);
- }
- else {
- ohci1394_stop_it_ctx(s->host->ohci, s->iso_tasklet.context, 0);
- }
-}
-
-static int stream_configure(struct stream *s, int cmd, struct amdtp_ioctl *cfg)
-{
- const int transfer_delay = 9000;
-
- if (cfg->format <= AMDTP_FORMAT_IEC958_AC3)
- s->format = cfg->format;
- else
- return -EINVAL;
-
- switch (cfg->rate) {
- case 32000:
- s->syt_interval = 8;
- s->fdf = FDF_SFC_32KHZ;
- s->iec958_rate_code = 0x0c;
- break;
- case 44100:
- s->syt_interval = 8;
- s->fdf = FDF_SFC_44K1HZ;
- s->iec958_rate_code = 0x00;
- break;
- case 48000:
- s->syt_interval = 8;
- s->fdf = FDF_SFC_48KHZ;
- s->iec958_rate_code = 0x04;
- break;
- case 88200:
- s->syt_interval = 16;
- s->fdf = FDF_SFC_88K2HZ;
- s->iec958_rate_code = 0x00;
- break;
- case 96000:
- s->syt_interval = 16;
- s->fdf = FDF_SFC_96KHZ;
- s->iec958_rate_code = 0x00;
- break;
- case 176400:
- s->syt_interval = 32;
- s->fdf = FDF_SFC_176K4HZ;
- s->iec958_rate_code = 0x00;
- break;
- case 192000:
- s->syt_interval = 32;
- s->fdf = FDF_SFC_192KHZ;
- s->iec958_rate_code = 0x00;
- break;
-
- default:
- return -EINVAL;
- }
-
- s->rate = cfg->rate;
- fraction_init(&s->samples_per_cycle, s->rate, 8000);
- fraction_init(&s->ready_samples, 0, 8000);
-
- /* The ticks_per_syt_offset is initialized to the number of
- * ticks between syt_interval events. The number of ticks per
- * second is 24.576e6, so the number of ticks between
- * syt_interval events is 24.576e6 * syt_interval / rate.
- */
- fraction_init(&s->ticks_per_syt_offset,
- 24576000 * s->syt_interval, s->rate);
- fraction_init(&s->cycle_offset, (transfer_delay % 3072) * s->rate, s->rate);
- atomic_set(&s->cycle_count, transfer_delay / 3072);
- atomic_set(&s->cycle_count2, 0);
-
- s->mode = cfg->mode;
- s->sample_format = AMDTP_INPUT_LE16;
-
- /* When using the AM824 raw subformat we can stream signals of
- * any dimension. The IEC958 subformat, however, only
- * supports 2 channels.
- */
- if (s->format == AMDTP_FORMAT_RAW || cfg->dimension == 2)
- s->dimension = cfg->dimension;
- else
- return -EINVAL;
-
- if (s->opcr != NULL) {
- cmp_unregister_opcr(s->host->host, s->opcr);
- s->opcr = NULL;
- }
-
- switch(cmd) {
- case AMDTP_IOC_PLUG:
- s->opcr = cmp_register_opcr(s->host->host, cfg->u.plug,
- /*payload*/ 12, plug_update, s);
- if (s->opcr == NULL)
- return -EINVAL;
- s->iso_channel = s->opcr->channel;
- break;
-
- case AMDTP_IOC_CHANNEL:
- if (cfg->u.channel >= 0 && cfg->u.channel < 64)
- s->iso_channel = cfg->u.channel;
- else
- return -EINVAL;
- break;
- }
-
- /* The ioctl settings were all valid, so we realloc the packet
- * lists to make sure the packet size is big enough.
- */
- if (s->packet_pool != NULL)
- stream_free_packet_lists(s);
-
- if (stream_alloc_packet_lists(s) < 0) {
- stream_free_packet_lists(s);
- return -ENOMEM;
- }
-
- return 0;
-}
-
-static struct stream *stream_alloc(struct amdtp_host *host)
-{
- struct stream *s;
- unsigned long flags;
-
- s = kmalloc(sizeof(struct stream), SLAB_KERNEL);
- if (s == NULL)
- return NULL;
-
- memset(s, 0, sizeof(struct stream));
- s->host = host;
-
- s->input = buffer_alloc(BUFFER_SIZE);
- if (s->input == NULL) {
- kfree(s);
- return NULL;
- }
-
- s->descriptor_pool = pci_pool_create("descriptor pool", host->ohci->dev,
- sizeof(struct descriptor_block),
- 16, 0);
-
- if (s->descriptor_pool == NULL) {
- kfree(s->input);
- kfree(s);
- return NULL;
- }
-
- INIT_LIST_HEAD(&s->free_packet_lists);
- INIT_LIST_HEAD(&s->dma_packet_lists);
-
- init_waitqueue_head(&s->packet_list_wait);
- spin_lock_init(&s->packet_list_lock);
-
- ohci1394_init_iso_tasklet(&s->iso_tasklet, OHCI_ISO_TRANSMIT,
- stream_shift_packet_lists,
- (unsigned long) s);
-
- if (ohci1394_register_iso_tasklet(host->ohci, &s->iso_tasklet) < 0) {
- pci_pool_destroy(s->descriptor_pool);
- kfree(s->input);
- kfree(s);
- return NULL;
- }
-
- spin_lock_irqsave(&host->stream_list_lock, flags);
- list_add_tail(&s->link, &host->stream_list);
- spin_unlock_irqrestore(&host->stream_list_lock, flags);
-
- return s;
-}
-
-static void stream_free(struct stream *s)
-{
- unsigned long flags;
-
- /* Stop the DMA. We wait for the dma packet list to become
- * empty and let the dma controller run out of programs. This
- * seems to be more reliable than stopping it directly, since
- * that sometimes generates an it transmit interrupt if we
- * later re-enable the context.
- */
- wait_event_interruptible(s->packet_list_wait,
- list_empty(&s->dma_packet_lists));
-
- ohci1394_stop_it_ctx(s->host->ohci, s->iso_tasklet.context, 1);
- ohci1394_unregister_iso_tasklet(s->host->ohci, &s->iso_tasklet);
-
- if (s->opcr != NULL)
- cmp_unregister_opcr(s->host->host, s->opcr);
-
- spin_lock_irqsave(&s->host->stream_list_lock, flags);
- list_del(&s->link);
- spin_unlock_irqrestore(&s->host->stream_list_lock, flags);
-
- kfree(s->input);
-
- stream_free_packet_lists(s);
- pci_pool_destroy(s->descriptor_pool);
-
- kfree(s);
-}
-
-/* File operations */
-
-static ssize_t amdtp_write(struct file *file, const char __user *buffer, size_t count,
- loff_t *offset_is_ignored)
-{
- struct stream *s = file->private_data;
- unsigned char *p;
- int i;
- size_t length;
-
- if (s->packet_pool == NULL)
- return -EBADFD;
-
- /* Fill the circular buffer from the input buffer and call the
- * iso packer when the buffer is full. The iso packer may
- * leave bytes in the buffer for two reasons: either the
- * remaining bytes wasn't enough to build a new packet, or
- * there were no free packet lists. In the first case we
- * re-fill the buffer and call the iso packer again or return
- * if we used all the data from userspace. In the second
- * case, the wait_event_interruptible will block until the irq
- * handler frees a packet list.
- */
-
- for (i = 0; i < count; i += length) {
- p = buffer_put_bytes(s->input, count - i, &length);
- if (copy_from_user(p, buffer + i, length))
- return -EFAULT;
- if (s->input->length < s->input->size)
- continue;
-
- stream_flush(s);
-
- if (s->current_packet_list != NULL)
- continue;
-
- if (file->f_flags & O_NONBLOCK)
- return i + length > 0 ? i + length : -EAGAIN;
-
- if (wait_event_interruptible(s->packet_list_wait,
- !list_empty(&s->free_packet_lists)))
- return -EINTR;
- }
-
- return count;
-}
-
-static long amdtp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
- struct stream *s = file->private_data;
- struct amdtp_ioctl cfg;
- int err;
- lock_kernel();
- switch(cmd)
- {
- case AMDTP_IOC_PLUG:
- case AMDTP_IOC_CHANNEL:
- if (copy_from_user(&cfg, (struct amdtp_ioctl __user *) arg, sizeof cfg))
- err = -EFAULT;
- else
- err = stream_configure(s, cmd, &cfg);
- break;
-
- default:
- err = -EINVAL;
- break;
- }
- unlock_kernel();
- return err;
-}
-
-static unsigned int amdtp_poll(struct file *file, poll_table *pt)
-{
- struct stream *s = file->private_data;
-
- poll_wait(file, &s->packet_list_wait, pt);
-
- if (!list_empty(&s->free_packet_lists))
- return POLLOUT | POLLWRNORM;
- else
- return 0;
-}
-
-static int amdtp_open(struct inode *inode, struct file *file)
-{
- struct amdtp_host *host;
- int i = ieee1394_file_to_instance(file);
-
- host = hpsb_get_hostinfo_bykey(&amdtp_highlevel, i);
- if (host == NULL)
- return -ENODEV;
-
- file->private_data = stream_alloc(host);
- if (file->private_data == NULL)
- return -ENOMEM;
-
- return 0;
-}
-
-static int amdtp_release(struct inode *inode, struct file *file)
-{
- struct stream *s = file->private_data;
-
- stream_free(s);
-
- return 0;
-}
-
-static struct cdev amdtp_cdev;
-static struct file_operations amdtp_fops =
-{
- .owner = THIS_MODULE,
- .write = amdtp_write,
- .poll = amdtp_poll,
- .unlocked_ioctl = amdtp_ioctl,
- .compat_ioctl = amdtp_ioctl, /* All amdtp ioctls are compatible */
- .open = amdtp_open,
- .release = amdtp_release
-};
-
-/* IEEE1394 Subsystem functions */
-
-static void amdtp_add_host(struct hpsb_host *host)
-{
- struct amdtp_host *ah;
- int minor;
-
- if (strcmp(host->driver->name, OHCI1394_DRIVER_NAME) != 0)
- return;
-
- ah = hpsb_create_hostinfo(&amdtp_highlevel, host, sizeof(*ah));
- if (!ah) {
- HPSB_ERR("amdtp: Unable able to alloc hostinfo");
- return;
- }
-
- ah->host = host;
- ah->ohci = host->hostdata;
-
- hpsb_set_hostinfo_key(&amdtp_highlevel, host, ah->host->id);
-
- minor = IEEE1394_MINOR_BLOCK_AMDTP * 16 + ah->host->id;
-
- INIT_LIST_HEAD(&ah->stream_list);
- spin_lock_init(&ah->stream_list_lock);
-
- devfs_mk_cdev(MKDEV(IEEE1394_MAJOR, minor),
- S_IFCHR|S_IRUSR|S_IWUSR, "amdtp/%d", ah->host->id);
-}
-
-static void amdtp_remove_host(struct hpsb_host *host)
-{
- struct amdtp_host *ah = hpsb_get_hostinfo(&amdtp_highlevel, host);
-
- if (ah)
- devfs_remove("amdtp/%d", ah->host->id);
-
- return;
-}
-
-static struct hpsb_highlevel amdtp_highlevel = {
- .name = "amdtp",
- .add_host = amdtp_add_host,
- .remove_host = amdtp_remove_host,
-};
-
-/* Module interface */
-
-MODULE_AUTHOR("Kristian Hogsberg <hogsberg@users.sf.net>");
-MODULE_DESCRIPTION("Driver for Audio & Music Data Transmission Protocol "
- "on OHCI boards.");
-MODULE_SUPPORTED_DEVICE("amdtp");
-MODULE_LICENSE("GPL");
-
-static int __init amdtp_init_module (void)
-{
- cdev_init(&amdtp_cdev, &amdtp_fops);
- amdtp_cdev.owner = THIS_MODULE;
- kobject_set_name(&amdtp_cdev.kobj, "amdtp");
- if (cdev_add(&amdtp_cdev, IEEE1394_AMDTP_DEV, 16)) {
- HPSB_ERR("amdtp: unable to add char device");
- return -EIO;
- }
-
- devfs_mk_dir("amdtp");
-
- hpsb_register_highlevel(&amdtp_highlevel);
-
- HPSB_INFO("Loaded AMDTP driver");
-
- return 0;
-}
-
-static void __exit amdtp_exit_module (void)
-{
- hpsb_unregister_highlevel(&amdtp_highlevel);
- devfs_remove("amdtp");
- cdev_del(&amdtp_cdev);
-
- HPSB_INFO("Unloaded AMDTP driver");
-}
-
-module_init(amdtp_init_module);
-module_exit(amdtp_exit_module);
diff --git a/drivers/ieee1394/amdtp.h b/drivers/ieee1394/amdtp.h
deleted file mode 100644
index 531f28e3ab50..000000000000
--- a/drivers/ieee1394/amdtp.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* -*- c-basic-offset: 8 -*- */
-
-#ifndef __AMDTP_H
-#define __AMDTP_H
-
-#include <asm/types.h>
-#include "ieee1394-ioctl.h"
-
-/* The userspace interface for the Audio & Music Data Transmission
- * Protocol driver is really simple. First, open /dev/amdtp, use the
- * ioctl to configure format, rate, dimension and either plug or
- * channel, then start writing samples.
- *
- * The formats supported by the driver are listed below.
- * AMDTP_FORMAT_RAW corresponds to the AM824 raw format, which can
- * carry any number of channels, so use this if you're streaming
- * multichannel audio. The AMDTP_FORMAT_IEC958_PCM corresponds to the
- * AM824 IEC958 encapsulation without the IEC958 data bit set, using
- * AMDTP_FORMAT_IEC958_AC3 will transmit the samples with the data bit
- * set, suitable for transmitting compressed AC-3 audio.
- *
- * The rate field specifies the transmission rate; supported values
- * are 32000, 44100, 48000, 88200, 96000, 176400 and 192000.
- *
- * The dimension field specifies the dimension of the signal, that is,
- * the number of audio channels. Only AMDTP_FORMAT_RAW supports
- * settings greater than 2.
- *
- * The mode field specifies which transmission mode to use. The AMDTP
- * specifies two different transmission modes: blocking and
- * non-blocking. The blocking transmission mode always send a fixed
- * number of samples, typically 8, 16 or 32. To exactly match the
- * transmission rate, the driver alternates between sending empty and
- * non-empty packets. In non-blocking mode, the driver transmits as
- * small packets as possible. For example, for a transmission rate of
- * 44100Hz, the driver should send 5 41/80 samples in every cycle, but
- * this is not possible so instead the driver alternates between
- * sending 5 and 6 samples.
- *
- * The last thing to specify is either the isochronous channel to use
- * or the output plug to connect to. If you know what channel the
- * destination device will listen on, you can specify the channel
- * directly and use the AMDTP_IOC_CHANNEL ioctl. However, if the
- * destination device chooses the channel and uses the IEC61883-1 plug
- * mechanism, you can specify an output plug to connect to. The
- * driver will pick up the channel number from the plug once the
- * destination device locks the output plug control register. In this
- * case set the plug field and use the AMDTP_IOC_PLUG ioctl.
- *
- * Having configured the interface, the driver now accepts writes of
- * regular 16 bit signed little endian samples, with the channels
- * interleaved. For example, 4 channels would look like:
- *
- * | sample 0 | sample 1 ...
- * | ch. 0 | ch. 1 | ch. 2 | ch. 3 | ch. 0 | ...
- * | lsb | msb | lsb | msb | lsb | msb | lsb | msb | lsb | msb | ...
- *
- */
-
-enum {
- AMDTP_FORMAT_RAW,
- AMDTP_FORMAT_IEC958_PCM,
- AMDTP_FORMAT_IEC958_AC3
-};
-
-enum {
- AMDTP_MODE_BLOCKING,
- AMDTP_MODE_NON_BLOCKING,
-};
-
-enum {
- AMDTP_INPUT_LE16,
- AMDTP_INPUT_BE16,
-};
-
-struct amdtp_ioctl {
- __u32 format;
- __u32 rate;
- __u32 dimension;
- __u32 mode;
- union { __u32 channel; __u32 plug; } u;
-};
-
-#endif /* __AMDTP_H */
diff --git a/drivers/ieee1394/cmp.c b/drivers/ieee1394/cmp.c
deleted file mode 100644
index 69aed26e83a1..000000000000
--- a/drivers/ieee1394/cmp.c
+++ /dev/null
@@ -1,311 +0,0 @@
-/* -*- c-basic-offset: 8 -*-
- *
- * cmp.c - Connection Management Procedures
- * Copyright (C) 2001 Kristian Høgsberg
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software Foundation,
- * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-/* TODO
- * ----
- *
- * - Implement IEC61883-1 output plugs and connection management.
- * This should probably be part of the general subsystem, as it could
- * be shared with dv1394.
- *
- * - Add IEC61883 unit directory when loading this module. This
- * requires a run-time changeable config rom.
- */
-
-#include <linux/module.h>
-#include <linux/list.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/wait.h>
-#include <linux/interrupt.h>
-
-#include "hosts.h"
-#include "highlevel.h"
-#include "ieee1394.h"
-#include "ieee1394_core.h"
-#include "cmp.h"
-
-struct plug {
- union {
- struct cmp_pcr pcr;
- quadlet_t quadlet;
- } u;
- void (*update)(struct cmp_pcr *plug, void *data);
- void *data;
-};
-
-struct cmp_host {
- struct hpsb_host *host;
-
- union {
- struct cmp_mpr ompr;
- quadlet_t ompr_quadlet;
- } u;
- struct plug opcr[2];
-
- union {
- struct cmp_mpr impr;
- quadlet_t impr_quadlet;
- } v;
- struct plug ipcr[2];
-};
-
-enum {
- CMP_P2P_CONNECTION,
- CMP_BC_CONNECTION
-};
-
-#define CSR_PCR_MAP 0x900
-#define CSR_PCR_MAP_END 0x9fc
-
-static struct hpsb_highlevel cmp_highlevel;
-
-static void cmp_add_host(struct hpsb_host *host);
-static void cmp_host_reset(struct hpsb_host *host);
-static int pcr_read(struct hpsb_host *host, int nodeid, quadlet_t *buf,
- u64 addr, size_t length, u16 flags);
-static int pcr_lock(struct hpsb_host *host, int nodeid, quadlet_t *store,
- u64 addr, quadlet_t data, quadlet_t arg, int extcode, u16 flags);
-
-static struct hpsb_highlevel cmp_highlevel = {
- .name = "cmp",
- .add_host = cmp_add_host,
- .host_reset = cmp_host_reset,
-};
-
-static struct hpsb_address_ops pcr_ops = {
- .read = pcr_read,
- .lock = pcr_lock,
-};
-
-
-struct cmp_pcr *
-cmp_register_opcr(struct hpsb_host *host, int opcr_number, int payload,
- void (*update)(struct cmp_pcr *pcr, void *data),
- void *data)
-{
- struct cmp_host *ch;
- struct plug *plug;
-
- ch = hpsb_get_hostinfo(&cmp_highlevel, host);
-
- if (opcr_number >= ch->u.ompr.nplugs ||
- ch->opcr[opcr_number].update != NULL)
- return NULL;
-
- plug = &ch->opcr[opcr_number];
- plug->u.pcr.online = 1;
- plug->u.pcr.bcast_count = 0;
- plug->u.pcr.p2p_count = 0;
- plug->u.pcr.overhead = 0;
- plug->u.pcr.payload = payload;
- plug->update = update;
- plug->data = data;
-
- return &plug->u.pcr;
-}
-
-void cmp_unregister_opcr(struct hpsb_host *host, struct cmp_pcr *opcr)
-{
- struct cmp_host *ch;
- struct plug *plug;
-
- ch = hpsb_get_hostinfo(&cmp_highlevel, host);
- plug = (struct plug *)opcr;
- if (plug - ch->opcr >= ch->u.ompr.nplugs) BUG();
-
- plug->u.pcr.online = 0;
- plug->update = NULL;
-}
-
-static void reset_plugs(struct cmp_host *ch)
-{
- int i;
-
- ch->u.ompr.non_persistent_ext = 0xff;
- for (i = 0; i < ch->u.ompr.nplugs; i++) {
- ch->opcr[i].u.pcr.bcast_count = 0;
- ch->opcr[i].u.pcr.p2p_count = 0;
- ch->opcr[i].u.pcr.overhead = 0;
- }
-}
-
-static void cmp_add_host(struct hpsb_host *host)
-{
- struct cmp_host *ch = hpsb_create_hostinfo(&cmp_highlevel, host, sizeof (*ch));
-
- if (ch == NULL) {
- HPSB_ERR("Failed to allocate cmp_host");
- return;
- }
-
- hpsb_register_addrspace(&cmp_highlevel, host, &pcr_ops,
- CSR_REGISTER_BASE + CSR_PCR_MAP,
- CSR_REGISTER_BASE + CSR_PCR_MAP_END);
-
- ch->host = host;
- ch->u.ompr.rate = IEEE1394_SPEED_100;
- ch->u.ompr.bcast_channel_base = 63;
- ch->u.ompr.nplugs = 2;
-
- reset_plugs(ch);
-}
-
-static void cmp_host_reset(struct hpsb_host *host)
-{
- struct cmp_host *ch;
-
- ch = hpsb_get_hostinfo(&cmp_highlevel, host);
- if (ch == NULL) {
- HPSB_ERR("cmp: Tried to reset unknown host");
- return;
- }
-
- reset_plugs(ch);
-}
-
-static int pcr_read(struct hpsb_host *host, int nodeid, quadlet_t *buf,
- u64 addr, size_t length, u16 flags)
-{
- int csraddr = addr - CSR_REGISTER_BASE;
- int plug;
- struct cmp_host *ch;
-
- if (length != 4)
- return RCODE_TYPE_ERROR;
-
- ch = hpsb_get_hostinfo(&cmp_highlevel, host);
- if (csraddr == 0x900) {
- *buf = cpu_to_be32(ch->u.ompr_quadlet);
- return RCODE_COMPLETE;
- }
- else if (csraddr < 0x904 + ch->u.ompr.nplugs * 4) {
- plug = (csraddr - 0x904) / 4;
- *buf = cpu_to_be32(ch->opcr[plug].u.quadlet);
- return RCODE_COMPLETE;
- }
- else if (csraddr < 0x980) {
- return RCODE_ADDRESS_ERROR;
- }
- else if (csraddr == 0x980) {
- *buf = cpu_to_be32(ch->v.impr_quadlet);
- return RCODE_COMPLETE;
- }
- else if (csraddr < 0x984 + ch->v.impr.nplugs * 4) {
- plug = (csraddr - 0x984) / 4;
- *buf = cpu_to_be32(ch->ipcr[plug].u.quadlet);
- return RCODE_COMPLETE;
- }
- else
- return RCODE_ADDRESS_ERROR;
-}
-
-static int pcr_lock(struct hpsb_host *host, int nodeid, quadlet_t *store,
- u64 addr, quadlet_t data, quadlet_t arg, int extcode, u16 flags)
-{
- int csraddr = addr - CSR_REGISTER_BASE;
- int plug;
- struct cmp_host *ch;
-
- ch = hpsb_get_hostinfo(&cmp_highlevel, host);
-
- if (extcode != EXTCODE_COMPARE_SWAP)
- return RCODE_TYPE_ERROR;
-
- if (csraddr == 0x900) {
- /* FIXME: Ignore writes to bits 30-31 and 0-7 */
- *store = cpu_to_be32(ch->u.ompr_quadlet);
- if (arg == cpu_to_be32(ch->u.ompr_quadlet))
- ch->u.ompr_quadlet = be32_to_cpu(data);
-
- return RCODE_COMPLETE;
- }
- if (csraddr < 0x904 + ch->u.ompr.nplugs * 4) {
- plug = (csraddr - 0x904) / 4;
- *store = cpu_to_be32(ch->opcr[plug].u.quadlet);
-
- if (arg == *store)
- ch->opcr[plug].u.quadlet = be32_to_cpu(data);
-
- if (be32_to_cpu(*store) != ch->opcr[plug].u.quadlet &&
- ch->opcr[plug].update != NULL)
- ch->opcr[plug].update(&ch->opcr[plug].u.pcr,
- ch->opcr[plug].data);
-
- return RCODE_COMPLETE;
- }
- else if (csraddr < 0x980) {
- return RCODE_ADDRESS_ERROR;
- }
- else if (csraddr == 0x980) {
- /* FIXME: Ignore writes to bits 24-31 and 0-7 */
- *store = cpu_to_be32(ch->u.ompr_quadlet);
- if (arg == cpu_to_be32(ch->u.ompr_quadlet))
- ch->u.ompr_quadlet = be32_to_cpu(data);
-
- return RCODE_COMPLETE;
- }
- else if (csraddr < 0x984 + ch->v.impr.nplugs * 4) {
- plug = (csraddr - 0x984) / 4;
- *store = cpu_to_be32(ch->ipcr[plug].u.quadlet);
-
- if (arg == *store)
- ch->ipcr[plug].u.quadlet = be32_to_cpu(data);
-
- if (be32_to_cpu(*store) != ch->ipcr[plug].u.quadlet &&
- ch->ipcr[plug].update != NULL)
- ch->ipcr[plug].update(&ch->ipcr[plug].u.pcr,
- ch->ipcr[plug].data);
-
- return RCODE_COMPLETE;
- }
- else
- return RCODE_ADDRESS_ERROR;
-}
-
-
-/* Module interface */
-
-MODULE_AUTHOR("Kristian Hogsberg <hogsberg@users.sf.net>");
-MODULE_DESCRIPTION("Connection Management Procedures (CMP)");
-MODULE_SUPPORTED_DEVICE("cmp");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(cmp_register_opcr);
-EXPORT_SYMBOL(cmp_unregister_opcr);
-
-static int __init cmp_init_module (void)
-{
- hpsb_register_highlevel (&cmp_highlevel);
-
- HPSB_INFO("Loaded CMP driver");
-
- return 0;
-}
-
-static void __exit cmp_exit_module (void)
-{
- hpsb_unregister_highlevel(&cmp_highlevel);
-
- HPSB_INFO("Unloaded CMP driver");
-}
-
-module_init(cmp_init_module);
-module_exit(cmp_exit_module);
diff --git a/drivers/ieee1394/cmp.h b/drivers/ieee1394/cmp.h
deleted file mode 100644
index f9288bfcd494..000000000000
--- a/drivers/ieee1394/cmp.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef __CMP_H
-#define __CMP_H
-
-struct cmp_mpr {
- u32 nplugs:5;
- u32 reserved:3;
- u32 persistent_ext:8;
- u32 non_persistent_ext:8;
- u32 bcast_channel_base:6;
- u32 rate:2;
-} __attribute__((packed));
-
-struct cmp_pcr {
- u32 payload:10;
- u32 overhead:4;
- u32 speed:2;
- u32 channel:6;
- u32 reserved:2;
- u32 p2p_count:6;
- u32 bcast_count:1;
- u32 online:1;
-} __attribute__((packed));
-
-struct cmp_pcr *cmp_register_opcr(struct hpsb_host *host, int plug,
- int payload,
- void (*update)(struct cmp_pcr *plug,
- void *data),
- void *data);
-void cmp_unregister_opcr(struct hpsb_host *host, struct cmp_pcr *plug);
-
-#endif /* __CMP_H */
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 2c674023a6ac..b1b14f8d4dd6 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -98,7 +98,7 @@ config TOUCHSCREEN_MK712
config TOUCHSCREEN_HP600
tristate "HP Jornada 680/690 touchscreen"
- depends on SH_HP600 && SH_ADC
+ depends on SH_HP6XX && SH_ADC
help
Say Y here if you have a HP Jornada 680 or 690 and want to
support the built-in touchscreen.
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 1778104e106c..7145cd150f7b 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -3395,6 +3395,7 @@ static int set_array_info(mddev_t * mddev, mdu_array_info_t *info)
mddev->ctime = get_seconds();
mddev->level = info->level;
+ mddev->clevel[0] = 0;
mddev->size = info->size;
mddev->raid_disks = info->raid_disks;
/* don't set md_minor, it is determined by which /dev/md* was
diff --git a/drivers/media/dvb/bt8xx/bt878.c b/drivers/media/dvb/bt8xx/bt878.c
index f29571450038..a04bb61f21f4 100644
--- a/drivers/media/dvb/bt8xx/bt878.c
+++ b/drivers/media/dvb/bt8xx/bt878.c
@@ -542,7 +542,7 @@ static struct pci_driver bt878_pci_driver = {
.remove = bt878_remove,
};
-static int bt878_pci_driver_registered = 0;
+static int bt878_pci_driver_registered;
/*******************************/
/* Module management functions */
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
index 44fcbe77c8f9..ea27b15007e9 100644
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
@@ -893,7 +893,7 @@ static int dvb_bt8xx_probe(struct bttv_sub_device *sub)
return 0;
}
-static int dvb_bt8xx_remove(struct bttv_sub_device *sub)
+static void dvb_bt8xx_remove(struct bttv_sub_device *sub)
{
struct dvb_bt8xx_card *card = dev_get_drvdata(&sub->dev);
@@ -911,8 +911,6 @@ static int dvb_bt8xx_remove(struct bttv_sub_device *sub)
dvb_unregister_adapter(&card->dvb_adapter);
kfree(card);
-
- return 0;
}
static struct bttv_sub_driver driver = {
diff --git a/drivers/media/dvb/dvb-core/dvbdev.c b/drivers/media/dvb/dvb-core/dvbdev.c
index 06b696e9acbd..54f8b95717b0 100644
--- a/drivers/media/dvb/dvb-core/dvbdev.c
+++ b/drivers/media/dvb/dvb-core/dvbdev.c
@@ -33,7 +33,7 @@
#include <linux/device.h>
#include <linux/fs.h>
#include <linux/cdev.h>
-
+#include <linux/mutex.h>
#include "dvbdev.h"
static int dvbdev_debug;
@@ -44,7 +44,7 @@ MODULE_PARM_DESC(dvbdev_debug, "Turn on/off device debugging (default:off).");
#define dprintk if (dvbdev_debug) printk
static LIST_HEAD(dvb_adapter_list);
-static DECLARE_MUTEX(dvbdev_register_lock);
+static DEFINE_MUTEX(dvbdev_register_lock);
static const char * const dnames[] = {
"video", "audio", "sec", "frontend", "demux", "dvr", "ca",
@@ -202,11 +202,11 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
struct dvb_device *dvbdev;
int id;
- if (down_interruptible (&dvbdev_register_lock))
+ if (mutex_lock_interruptible(&dvbdev_register_lock))
return -ERESTARTSYS;
if ((id = dvbdev_get_free_id (adap, type)) < 0) {
- up (&dvbdev_register_lock);
+ mutex_unlock(&dvbdev_register_lock);
*pdvbdev = NULL;
printk ("%s: could get find free device id...\n", __FUNCTION__);
return -ENFILE;
@@ -215,11 +215,11 @@ int dvb_register_device(struct dvb_adapter *adap, struct dvb_device **pdvbdev,
*pdvbdev = dvbdev = kmalloc(sizeof(struct dvb_device), GFP_KERNEL);
if (!dvbdev) {
- up(&dvbdev_register_lock);
+ mutex_unlock(&dvbdev_register_lock);
return -ENOMEM;
}
- up (&dvbdev_register_lock);
+ mutex_unlock(&dvbdev_register_lock);
memcpy(dvbdev, template, sizeof(struct dvb_device));
dvbdev->type = type;
@@ -289,11 +289,11 @@ int dvb_register_adapter(struct dvb_adapter *adap, const char *name, struct modu
{
int num;
- if (down_interruptible (&dvbdev_register_lock))
+ if (mutex_lock_interruptible(&dvbdev_register_lock))
return -ERESTARTSYS;
if ((num = dvbdev_get_free_adapter_num ()) < 0) {
- up (&dvbdev_register_lock);
+ mutex_unlock(&dvbdev_register_lock);
return -ENFILE;
}
@@ -309,7 +309,7 @@ int dvb_register_adapter(struct dvb_adapter *adap, const char *name, struct modu
list_add_tail (&adap->list_head, &dvb_adapter_list);
- up (&dvbdev_register_lock);
+ mutex_unlock(&dvbdev_register_lock);
return num;
}
@@ -320,10 +320,10 @@ int dvb_unregister_adapter(struct dvb_adapter *adap)
{
devfs_remove("dvb/adapter%d", adap->num);
- if (down_interruptible (&dvbdev_register_lock))
+ if (mutex_lock_interruptible(&dvbdev_register_lock))
return -ERESTARTSYS;
list_del (&adap->list_head);
- up (&dvbdev_register_lock);
+ mutex_unlock(&dvbdev_register_lock);
return 0;
}
EXPORT_SYMBOL(dvb_unregister_adapter);
diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c
index 18d169836c9c..a7fb06f4cd34 100644
--- a/drivers/media/dvb/dvb-usb/cxusb.c
+++ b/drivers/media/dvb/dvb-usb/cxusb.c
@@ -691,6 +691,8 @@ module_init (cxusb_module_init);
module_exit (cxusb_module_exit);
MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>");
+MODULE_AUTHOR("Michael Krufky <mkrufky@m1k.net>");
+MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>");
MODULE_DESCRIPTION("Driver for Conexant USB2.0 hybrid reference design");
MODULE_VERSION("1.0-alpha");
MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c
index 757075f007c1..1b9934ea5b06 100644
--- a/drivers/media/dvb/frontends/dvb-pll.c
+++ b/drivers/media/dvb/frontends/dvb-pll.c
@@ -333,7 +333,7 @@ struct dvb_pll_desc dvb_pll_tbmv30111in = {
.name = "Samsung TBMV30111IN",
.min = 54000000,
.max = 860000000,
- .count = 4,
+ .count = 6,
.entries = {
{ 172000000, 44000000, 166666, 0xb4, 0x01 },
{ 214000000, 44000000, 166666, 0xb4, 0x02 },
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index 327a8089193b..27494901975f 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -81,7 +81,7 @@ static int adac = DVB_ADAC_TI;
static int hw_sections;
static int rgb_on;
static int volume = 255;
-static int budgetpatch = 0;
+static int budgetpatch;
module_param_named(debug, av7110_debug, int, 0644);
MODULE_PARM_DESC(debug, "debug level (bitmask, default 0)");
@@ -103,7 +103,7 @@ MODULE_PARM_DESC(budgetpatch, "use budget-patch hardware modification: default 0
static void restart_feeds(struct av7110 *av7110);
-static int av7110_num = 0;
+static int av7110_num;
#define FE_FUNC_OVERRIDE(fe_func, av7110_copy, av7110_func) \
{\
diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c
index cb377452b57d..b2e63e9fc053 100644
--- a/drivers/media/dvb/ttpci/av7110_hw.c
+++ b/drivers/media/dvb/ttpci/av7110_hw.c
@@ -146,52 +146,52 @@ static int load_dram(struct av7110 *av7110, u32 *data, int len)
{
int i;
int blocks, rest;
- u32 base, bootblock = BOOT_BLOCK;
+ u32 base, bootblock = AV7110_BOOT_BLOCK;
dprintk(4, "%p\n", av7110);
- blocks = len / BOOT_MAX_SIZE;
- rest = len % BOOT_MAX_SIZE;
+ blocks = len / AV7110_BOOT_MAX_SIZE;
+ rest = len % AV7110_BOOT_MAX_SIZE;
base = DRAM_START_CODE;
for (i = 0; i < blocks; i++) {
- if (waitdebi(av7110, BOOT_STATE, BOOTSTATE_BUFFER_EMPTY) < 0) {
+ if (waitdebi(av7110, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_EMPTY) < 0) {
printk(KERN_ERR "dvb-ttpci: load_dram(): timeout at block %d\n", i);
return -ETIMEDOUT;
}
dprintk(4, "writing DRAM block %d\n", i);
mwdebi(av7110, DEBISWAB, bootblock,
- ((char*)data) + i * BOOT_MAX_SIZE, BOOT_MAX_SIZE);
+ ((char*)data) + i * AV7110_BOOT_MAX_SIZE, AV7110_BOOT_MAX_SIZE);
bootblock ^= 0x1400;
- iwdebi(av7110, DEBISWAB, BOOT_BASE, swab32(base), 4);
- iwdebi(av7110, DEBINOSWAP, BOOT_SIZE, BOOT_MAX_SIZE, 2);
- iwdebi(av7110, DEBINOSWAP, BOOT_STATE, BOOTSTATE_BUFFER_FULL, 2);
- base += BOOT_MAX_SIZE;
+ iwdebi(av7110, DEBISWAB, AV7110_BOOT_BASE, swab32(base), 4);
+ iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_SIZE, AV7110_BOOT_MAX_SIZE, 2);
+ iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_FULL, 2);
+ base += AV7110_BOOT_MAX_SIZE;
}
if (rest > 0) {
- if (waitdebi(av7110, BOOT_STATE, BOOTSTATE_BUFFER_EMPTY) < 0) {
+ if (waitdebi(av7110, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_EMPTY) < 0) {
printk(KERN_ERR "dvb-ttpci: load_dram(): timeout at last block\n");
return -ETIMEDOUT;
}
if (rest > 4)
mwdebi(av7110, DEBISWAB, bootblock,
- ((char*)data) + i * BOOT_MAX_SIZE, rest);
+ ((char*)data) + i * AV7110_BOOT_MAX_SIZE, rest);
else
mwdebi(av7110, DEBISWAB, bootblock,
- ((char*)data) + i * BOOT_MAX_SIZE - 4, rest + 4);
+ ((char*)data) + i * AV7110_BOOT_MAX_SIZE - 4, rest + 4);
- iwdebi(av7110, DEBISWAB, BOOT_BASE, swab32(base), 4);
- iwdebi(av7110, DEBINOSWAP, BOOT_SIZE, rest, 2);
- iwdebi(av7110, DEBINOSWAP, BOOT_STATE, BOOTSTATE_BUFFER_FULL, 2);
+ iwdebi(av7110, DEBISWAB, AV7110_BOOT_BASE, swab32(base), 4);
+ iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_SIZE, rest, 2);
+ iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_FULL, 2);
}
- if (waitdebi(av7110, BOOT_STATE, BOOTSTATE_BUFFER_EMPTY) < 0) {
+ if (waitdebi(av7110, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_EMPTY) < 0) {
printk(KERN_ERR "dvb-ttpci: load_dram(): timeout after last block\n");
return -ETIMEDOUT;
}
- iwdebi(av7110, DEBINOSWAP, BOOT_SIZE, 0, 2);
- iwdebi(av7110, DEBINOSWAP, BOOT_STATE, BOOTSTATE_BUFFER_FULL, 2);
- if (waitdebi(av7110, BOOT_STATE, BOOTSTATE_BOOT_COMPLETE) < 0) {
+ iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_SIZE, 0, 2);
+ iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_FULL, 2);
+ if (waitdebi(av7110, AV7110_BOOT_STATE, BOOTSTATE_AV7110_BOOT_COMPLETE) < 0) {
printk(KERN_ERR "dvb-ttpci: load_dram(): final handshake timeout\n");
return -ETIMEDOUT;
}
@@ -262,7 +262,7 @@ int av7110_bootarm(struct av7110 *av7110)
//saa7146_setgpio(dev, 3, SAA7146_GPIO_INPUT);
mwdebi(av7110, DEBISWAB, DPRAM_BASE, bootcode, sizeof(bootcode));
- iwdebi(av7110, DEBINOSWAP, BOOT_STATE, BOOTSTATE_BUFFER_FULL, 2);
+ iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_FULL, 2);
if (saa7146_wait_for_debi_done(av7110->dev, 1)) {
printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): "
diff --git a/drivers/media/dvb/ttpci/av7110_hw.h b/drivers/media/dvb/ttpci/av7110_hw.h
index 84b83299b8be..4e173c67fbb2 100644
--- a/drivers/media/dvb/ttpci/av7110_hw.h
+++ b/drivers/media/dvb/ttpci/av7110_hw.h
@@ -18,7 +18,7 @@ enum av7110_bootstate
{
BOOTSTATE_BUFFER_EMPTY = 0,
BOOTSTATE_BUFFER_FULL = 1,
- BOOTSTATE_BOOT_COMPLETE = 2
+ BOOTSTATE_AV7110_BOOT_COMPLETE = 2
};
enum av7110_type_rec_play_format
@@ -295,11 +295,11 @@ enum av7110_command_type {
#define DPRAM_BASE 0x4000
/* boot protocol area */
-#define BOOT_STATE (DPRAM_BASE + 0x3F8)
-#define BOOT_SIZE (DPRAM_BASE + 0x3FA)
-#define BOOT_BASE (DPRAM_BASE + 0x3FC)
-#define BOOT_BLOCK (DPRAM_BASE + 0x400)
-#define BOOT_MAX_SIZE 0xc00
+#define AV7110_BOOT_STATE (DPRAM_BASE + 0x3F8)
+#define AV7110_BOOT_SIZE (DPRAM_BASE + 0x3FA)
+#define AV7110_BOOT_BASE (DPRAM_BASE + 0x3FC)
+#define AV7110_BOOT_BLOCK (DPRAM_BASE + 0x400)
+#define AV7110_BOOT_MAX_SIZE 0xc00
/* firmware command protocol area */
#define IRQ_STATE (DPRAM_BASE + 0x0F4)
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index dd24896906fe..faf728366c4e 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -8,7 +8,8 @@ bttv-objs := bttv-driver.o bttv-cards.o bttv-if.o \
zoran-objs := zr36120.o zr36120_i2c.o zr36120_mem.o
zr36067-objs := zoran_procfs.o zoran_device.o \
zoran_driver.o zoran_card.o
-tuner-objs := tuner-core.o tuner-simple.o mt20xx.o tda8290.o tea5767.o
+tuner-objs := tuner-core.o tuner-types.o tuner-simple.o \
+ mt20xx.o tda8290.o tea5767.o
msp3400-objs := msp3400-driver.o msp3400-kthreads.o
diff --git a/drivers/media/video/arv.c b/drivers/media/video/arv.c
index 7d5a068353f2..994b75fe165a 100644
--- a/drivers/media/video/arv.c
+++ b/drivers/media/video/arv.c
@@ -129,9 +129,9 @@ static unsigned char yuv[MAX_AR_FRAME_BYTES];
static int freq = DEFAULT_FREQ; /* BCLK: available 50 or 70 (MHz) */
static int vga = 0; /* default mode(0:QVGA mode, other:VGA mode) */
static int vga_interlace = 0; /* 0 is normal mode for, else interlace mode */
-MODULE_PARM(freq, "i");
-MODULE_PARM(vga, "i");
-MODULE_PARM(vga_interlace, "i");
+module_param(freq, int, 0);
+module_param(vga, int, 0);
+module_param(vga_interlace, int, 0);
static int ar_initialize(struct video_device *dev);
diff --git a/drivers/media/video/bt832.c b/drivers/media/video/bt832.c
index 07c78f1f7a44..cc54b62f4601 100644
--- a/drivers/media/video/bt832.c
+++ b/drivers/media/video/bt832.c
@@ -43,7 +43,7 @@ static unsigned short normal_i2c[] = { I2C_BT832_ALT1>>1, I2C_BT832_ALT2>>1,
I2C_CLIENT_END };
I2C_CLIENT_INSMOD;
-int debug = 0; /* debug output */
+int debug; /* debug output */
module_param(debug, int, 0644);
/* ---------------------------------------------------------------------- */
diff --git a/drivers/media/video/btcx-risc.c b/drivers/media/video/btcx-risc.c
index a48de3c0e3f0..b4aca7249276 100644
--- a/drivers/media/video/btcx-risc.c
+++ b/drivers/media/video/btcx-risc.c
@@ -37,7 +37,7 @@ MODULE_DESCRIPTION("some code shared by bttv and cx88xx drivers");
MODULE_AUTHOR("Gerd Knorr");
MODULE_LICENSE("GPL");
-static unsigned int debug = 0;
+static unsigned int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug,"debug messages, default is 0 (no)");
diff --git a/drivers/media/video/bttv-cards.c b/drivers/media/video/bttv-cards.c
index 65323e78d5fd..9749d6ed6231 100644
--- a/drivers/media/video/bttv-cards.c
+++ b/drivers/media/video/bttv-cards.c
@@ -92,8 +92,8 @@ static void identify_by_eeprom(struct bttv *btv,
static int __devinit pvr_boot(struct bttv *btv);
/* config variables */
-static unsigned int triton1=0;
-static unsigned int vsfx=0;
+static unsigned int triton1;
+static unsigned int vsfx;
static unsigned int latency = UNSET;
int no_overlay=-1;
@@ -106,7 +106,7 @@ static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
#ifdef MODULE
static unsigned int autoload = 1;
#else
-static unsigned int autoload = 0;
+static unsigned int autoload;
#endif
static unsigned int gpiomask = UNSET;
static unsigned int audioall = UNSET;
diff --git a/drivers/media/video/bttv-driver.c b/drivers/media/video/bttv-driver.c
index 0e6970346788..aa4c4c521880 100644
--- a/drivers/media/video/bttv-driver.c
+++ b/drivers/media/video/bttv-driver.c
@@ -48,47 +48,46 @@
unsigned int bttv_num; /* number of Bt848s in use */
struct bttv bttvs[BTTV_MAX];
-unsigned int bttv_debug = 0;
+unsigned int bttv_debug;
unsigned int bttv_verbose = 1;
-unsigned int bttv_gpio = 0;
+unsigned int bttv_gpio;
/* config variables */
#ifdef __BIG_ENDIAN
static unsigned int bigendian=1;
#else
-static unsigned int bigendian=0;
+static unsigned int bigendian;
#endif
static unsigned int radio[BTTV_MAX];
-static unsigned int irq_debug = 0;
+static unsigned int irq_debug;
static unsigned int gbuffers = 8;
static unsigned int gbufsize = 0x208000;
static int video_nr = -1;
static int radio_nr = -1;
static int vbi_nr = -1;
-static int debug_latency = 0;
+static int debug_latency;
-static unsigned int fdsr = 0;
+static unsigned int fdsr;
/* options */
-static unsigned int combfilter = 0;
-static unsigned int lumafilter = 0;
+static unsigned int combfilter;
+static unsigned int lumafilter;
static unsigned int automute = 1;
-static unsigned int chroma_agc = 0;
+static unsigned int chroma_agc;
static unsigned int adc_crush = 1;
static unsigned int whitecrush_upper = 0xCF;
static unsigned int whitecrush_lower = 0x7F;
-static unsigned int vcr_hack = 0;
-static unsigned int irq_iswitch = 0;
+static unsigned int vcr_hack;
+static unsigned int irq_iswitch;
static unsigned int uv_ratio = 50;
-static unsigned int full_luma_range = 0;
-static unsigned int coring = 0;
+static unsigned int full_luma_range;
+static unsigned int coring;
extern int no_overlay;
/* API features (turn on/off stuff for testing) */
static unsigned int v4l2 = 1;
-
/* insmod args */
module_param(bttv_verbose, int, 0644);
module_param(bttv_gpio, int, 0644);
@@ -685,16 +684,16 @@ int check_alloc_btres(struct bttv *btv, struct bttv_fh *fh, int bit)
return 1;
/* is it free? */
- down(&btv->reslock);
+ mutex_lock(&btv->reslock);
if (btv->resources & bit) {
/* no, someone else uses it */
- up(&btv->reslock);
+ mutex_unlock(&btv->reslock);
return 0;
}
/* it's free, grab it */
fh->resources |= bit;
btv->resources |= bit;
- up(&btv->reslock);
+ mutex_unlock(&btv->reslock);
return 1;
}
@@ -717,10 +716,10 @@ void free_btres(struct bttv *btv, struct bttv_fh *fh, int bits)
/* trying to free ressources not allocated by us ... */
printk("bttv: BUG! (btres)\n");
}
- down(&btv->reslock);
+ mutex_lock(&btv->reslock);
fh->resources &= ~bits;
btv->resources &= ~bits;
- up(&btv->reslock);
+ mutex_unlock(&btv->reslock);
}
/* ----------------------------------------------------------------------- */
@@ -1537,12 +1536,12 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg)
case VIDIOCSFREQ:
{
unsigned long *freq = arg;
- down(&btv->lock);
+ mutex_lock(&btv->lock);
btv->freq=*freq;
bttv_call_i2c_clients(btv,VIDIOCSFREQ,freq);
if (btv->has_matchbox && btv->radio_user)
tea5757_set_freq(btv,*freq);
- up(&btv->lock);
+ mutex_unlock(&btv->lock);
return 0;
}
@@ -1572,10 +1571,10 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg)
if (v->mode >= BTTV_TVNORMS)
return -EINVAL;
- down(&btv->lock);
+ mutex_lock(&btv->lock);
set_tvnorm(btv,v->mode);
bttv_call_i2c_clients(btv,cmd,v);
- up(&btv->lock);
+ mutex_unlock(&btv->lock);
return 0;
}
@@ -1612,17 +1611,17 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg)
if (v->norm >= BTTV_TVNORMS)
return -EINVAL;
- down(&btv->lock);
+ mutex_lock(&btv->lock);
if (channel == btv->input &&
v->norm == btv->tvnorm) {
/* nothing to do */
- up(&btv->lock);
+ mutex_unlock(&btv->lock);
return 0;
}
btv->tvnorm = v->norm;
set_input(btv,v->channel);
- up(&btv->lock);
+ mutex_unlock(&btv->lock);
return 0;
}
@@ -1635,14 +1634,14 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg)
v->flags |= VIDEO_AUDIO_MUTABLE;
v->mode = VIDEO_SOUND_MONO;
- down(&btv->lock);
+ mutex_lock(&btv->lock);
bttv_call_i2c_clients(btv,cmd,v);
/* card specific hooks */
if (btv->audio_hook)
btv->audio_hook(btv,v,0);
- up(&btv->lock);
+ mutex_unlock(&btv->lock);
return 0;
}
case VIDIOCSAUDIO:
@@ -1653,7 +1652,7 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg)
if (audio >= bttv_tvcards[btv->c.type].audio_inputs)
return -EINVAL;
- down(&btv->lock);
+ mutex_lock(&btv->lock);
audio_mux(btv, (v->flags&VIDEO_AUDIO_MUTE) ? AUDIO_MUTE : AUDIO_UNMUTE);
bttv_call_i2c_clients(btv,cmd,v);
@@ -1661,7 +1660,7 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg)
if (btv->audio_hook)
btv->audio_hook(btv,v,1);
- up(&btv->lock);
+ mutex_unlock(&btv->lock);
return 0;
}
@@ -1695,10 +1694,10 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg)
if (i == BTTV_TVNORMS)
return -EINVAL;
- down(&btv->lock);
+ mutex_lock(&btv->lock);
set_tvnorm(btv,i);
i2c_vidiocschan(btv);
- up(&btv->lock);
+ mutex_unlock(&btv->lock);
return 0;
}
case VIDIOC_QUERYSTD:
@@ -1756,9 +1755,9 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg)
if (*i > bttv_tvcards[btv->c.type].video_inputs)
return -EINVAL;
- down(&btv->lock);
+ mutex_lock(&btv->lock);
set_input(btv,*i);
- up(&btv->lock);
+ mutex_unlock(&btv->lock);
return 0;
}
@@ -1770,7 +1769,7 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg)
return -EINVAL;
if (0 != t->index)
return -EINVAL;
- down(&btv->lock);
+ mutex_lock(&btv->lock);
memset(t,0,sizeof(*t));
strcpy(t->name, "Television");
t->type = V4L2_TUNER_ANALOG_TV;
@@ -1805,7 +1804,7 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg)
}
}
/* FIXME: fill capability+audmode */
- up(&btv->lock);
+ mutex_unlock(&btv->lock);
return 0;
}
case VIDIOC_S_TUNER:
@@ -1816,7 +1815,7 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg)
return -EINVAL;
if (0 != t->index)
return -EINVAL;
- down(&btv->lock);
+ mutex_lock(&btv->lock);
{
struct video_audio va;
memset(&va, 0, sizeof(struct video_audio));
@@ -1833,7 +1832,7 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg)
if (btv->audio_hook)
btv->audio_hook(btv,&va,1);
}
- up(&btv->lock);
+ mutex_unlock(&btv->lock);
return 0;
}
@@ -1854,12 +1853,12 @@ static int bttv_common_ioctls(struct bttv *btv, unsigned int cmd, void *arg)
return -EINVAL;
if (unlikely (f->type != V4L2_TUNER_ANALOG_TV))
return -EINVAL;
- down(&btv->lock);
+ mutex_lock(&btv->lock);
btv->freq = f->frequency;
bttv_call_i2c_clients(btv,VIDIOCSFREQ,&btv->freq);
if (btv->has_matchbox && btv->radio_user)
tea5757_set_freq(btv,btv->freq);
- up(&btv->lock);
+ mutex_unlock(&btv->lock);
return 0;
}
case VIDIOC_LOG_STATUS:
@@ -3157,7 +3156,7 @@ static int radio_open(struct inode *inode, struct file *file)
return -ENODEV;
dprintk("bttv%d: open called (radio)\n",btv->c.nr);
- down(&btv->lock);
+ mutex_lock(&btv->lock);
btv->radio_user++;
@@ -3166,7 +3165,7 @@ static int radio_open(struct inode *inode, struct file *file)
bttv_call_i2c_clients(btv,AUDC_SET_RADIO,&btv->tuner_type);
audio_mux(btv,AUDIO_RADIO);
- up(&btv->lock);
+ mutex_unlock(&btv->lock);
return 0;
}
@@ -3921,8 +3920,8 @@ static int __devinit bttv_probe(struct pci_dev *dev,
sprintf(btv->c.name,"bttv%d",btv->c.nr);
/* initialize structs / fill in defaults */
- init_MUTEX(&btv->lock);
- init_MUTEX(&btv->reslock);
+ mutex_init(&btv->lock);
+ mutex_init(&btv->reslock);
spin_lock_init(&btv->s_lock);
spin_lock_init(&btv->gpio_lock);
init_waitqueue_head(&btv->gpioq);
diff --git a/drivers/media/video/bttv-i2c.c b/drivers/media/video/bttv-i2c.c
index 748d630c7fe4..614c12018557 100644
--- a/drivers/media/video/bttv-i2c.c
+++ b/drivers/media/video/bttv-i2c.c
@@ -41,9 +41,9 @@ static struct i2c_client bttv_i2c_client_template;
static int attach_inform(struct i2c_client *client);
-static int i2c_debug = 0;
-static int i2c_hw = 0;
-static int i2c_scan = 0;
+static int i2c_debug;
+static int i2c_hw;
+static int i2c_scan;
module_param(i2c_debug, int, 0644);
module_param(i2c_hw, int, 0444);
module_param(i2c_scan, int, 0444);
diff --git a/drivers/media/video/bttvp.h b/drivers/media/video/bttvp.h
index dd00c20ab95e..9cb72f176f7d 100644
--- a/drivers/media/video/bttvp.h
+++ b/drivers/media/video/bttvp.h
@@ -35,6 +35,7 @@
#include <linux/videodev.h>
#include <linux/pci.h>
#include <linux/input.h>
+#include <linux/mutex.h>
#include <asm/scatterlist.h>
#include <asm/io.h>
@@ -309,9 +310,9 @@ struct bttv {
/* locking */
spinlock_t s_lock;
- struct semaphore lock;
+ struct mutex lock;
int resources;
- struct semaphore reslock;
+ struct mutex reslock;
#ifdef VIDIOC_G_PRIORITY
struct v4l2_prio_state prio;
#endif
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 1d75a42629d1..c66c2c1f4809 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -43,7 +43,7 @@ MODULE_LICENSE("GPL");
static unsigned short normal_i2c[] = { 0x88 >> 1, I2C_CLIENT_END };
-int cx25840_debug = 0;
+static int cx25840_debug;
module_param_named(debug,cx25840_debug, int, 0644);
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index 76fcb4e995c9..53308911ae6e 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -31,8 +31,7 @@ config VIDEO_CX88_DVB
config VIDEO_CX88_ALSA
tristate "ALSA DMA audio support"
- depends on VIDEO_CX88 && SND
- select SND_PCM_OSS
+ depends on VIDEO_CX88 && SND && EXPERIMENTAL
---help---
This is a video4linux driver for direct (DMA) audio on
Conexant 2388x based TV cards.
diff --git a/drivers/media/video/cx88/Makefile b/drivers/media/video/cx88/Makefile
index e4b2134fe567..6e5eaa22619e 100644
--- a/drivers/media/video/cx88/Makefile
+++ b/drivers/media/video/cx88/Makefile
@@ -5,6 +5,7 @@ cx8802-objs := cx88-mpeg.o
obj-$(CONFIG_VIDEO_CX88) += cx88xx.o cx8800.o cx8802.o cx88-blackbird.o
obj-$(CONFIG_VIDEO_CX88_DVB) += cx88-dvb.o cx88-vp3054-i2c.o
+obj-$(CONFIG_VIDEO_CX88_ALSA) += cx88-alsa.o
EXTRA_CFLAGS += -I$(src)/..
EXTRA_CFLAGS += -I$(srctree)/drivers/media/dvb/dvb-core
diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c
index 7695b521eb35..a2e36a1e5f59 100644
--- a/drivers/media/video/cx88/cx88-alsa.c
+++ b/drivers/media/video/cx88/cx88-alsa.c
@@ -116,7 +116,7 @@ MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Conexant,23881},"
"{{Conexant,23882},"
"{{Conexant,23883}");
-static unsigned int debug = 0;
+static unsigned int debug;
module_param(debug,int,0644);
MODULE_PARM_DESC(debug,"enable debug messages");
@@ -333,10 +333,10 @@ static snd_pcm_hardware_t snd_cx88_digital_hw = {
.channels_min = 1,
.channels_max = 2,
.buffer_bytes_max = (2*2048),
- .period_bytes_min = 256,
+ .period_bytes_min = 2048,
.period_bytes_max = 2048,
.periods_min = 2,
- .periods_max = 16,
+ .periods_max = 2,
};
/*
@@ -653,7 +653,7 @@ static void snd_cx88_dev_free(snd_card_t * card)
* Alsa Constructor - Component probe
*/
-static int devno=0;
+static int devno;
static int __devinit snd_cx88_create(snd_card_t *card, struct pci_dev *pci,
snd_cx88_card_t **rchip)
{
@@ -805,7 +805,6 @@ static struct pci_driver cx88_audio_pci_driver = {
.id_table = cx88_audio_pci_tbl,
.probe = cx88_audio_initdev,
.remove = cx88_audio_finidev,
- SND_PCI_PM_CALLBACKS
};
/****************************************************************************
diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index 194446f28c55..8d6d6a6cf785 100644
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -32,6 +32,7 @@
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/videodev2.h>
+#include <linux/mutex.h>
#include "cx88.h"
#include <media/v4l2-common.h>
@@ -75,7 +76,7 @@ MODULE_PARM_DESC(nocomb,"disable comb filter");
static unsigned int cx88_devcount;
static LIST_HEAD(cx88_devlist);
-static DECLARE_MUTEX(devlist);
+static DEFINE_MUTEX(devlist);
#define NO_SYNC_LINE (-1U)
@@ -1036,7 +1037,7 @@ struct cx88_core* cx88_core_get(struct pci_dev *pci)
struct list_head *item;
int i;
- down(&devlist);
+ mutex_lock(&devlist);
list_for_each(item,&cx88_devlist) {
core = list_entry(item, struct cx88_core, devlist);
if (pci->bus->number != core->pci_bus)
@@ -1047,7 +1048,7 @@ struct cx88_core* cx88_core_get(struct pci_dev *pci)
if (0 != get_ressources(core,pci))
goto fail_unlock;
atomic_inc(&core->refcount);
- up(&devlist);
+ mutex_unlock(&devlist);
return core;
}
core = kzalloc(sizeof(*core),GFP_KERNEL);
@@ -1122,13 +1123,13 @@ struct cx88_core* cx88_core_get(struct pci_dev *pci)
cx88_card_setup(core);
cx88_ir_init(core,pci);
- up(&devlist);
+ mutex_unlock(&devlist);
return core;
fail_free:
kfree(core);
fail_unlock:
- up(&devlist);
+ mutex_unlock(&devlist);
return NULL;
}
@@ -1140,14 +1141,14 @@ void cx88_core_put(struct cx88_core *core, struct pci_dev *pci)
if (!atomic_dec_and_test(&core->refcount))
return;
- down(&devlist);
+ mutex_lock(&devlist);
cx88_ir_fini(core);
if (0 == core->i2c_rc)
i2c_bit_del_bus(&core->i2c_adap);
list_del(&core->devlist);
iounmap(core->lmmio);
cx88_devcount--;
- up(&devlist);
+ mutex_unlock(&devlist);
kfree(core);
}
diff --git a/drivers/media/video/cx88/cx88-tvaudio.c b/drivers/media/video/cx88/cx88-tvaudio.c
index 24118e43e73a..da8d97ce0c4b 100644
--- a/drivers/media/video/cx88/cx88-tvaudio.c
+++ b/drivers/media/video/cx88/cx88-tvaudio.c
@@ -60,6 +60,11 @@ static unsigned int audio_debug = 0;
module_param(audio_debug, int, 0644);
MODULE_PARM_DESC(audio_debug, "enable debug messages [audio]");
+static unsigned int always_analog = 0;
+module_param(always_analog,int,0644);
+MODULE_PARM_DESC(always_analog,"force analog audio out");
+
+
#define dprintk(fmt, arg...) if (audio_debug) \
printk(KERN_DEBUG "%s/0: " fmt, core->name , ## arg)
@@ -155,7 +160,8 @@ static void set_audio_finish(struct cx88_core *core, u32 ctl)
cx_write(AUD_I2SOUTPUTCNTL, 1);
cx_write(AUD_I2SCNTL, 0);
/* cx_write(AUD_APB_IN_RATE_ADJ, 0); */
- } else {
+ }
+ if ((always_analog) || (!cx88_boards[core->board].blackbird)) {
ctl |= EN_DAC_ENABLE;
cx_write(AUD_CTL, ctl);
}
diff --git a/drivers/media/video/cx88/cx88-vp3054-i2c.c b/drivers/media/video/cx88/cx88-vp3054-i2c.c
index 372cd29cedbd..751a754a45e9 100644
--- a/drivers/media/video/cx88/cx88-vp3054-i2c.c
+++ b/drivers/media/video/cx88/cx88-vp3054-i2c.c
@@ -32,6 +32,10 @@
#include "cx88-vp3054-i2c.h"
+MODULE_DESCRIPTION("driver for cx2388x VP3054 design");
+MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>");
+MODULE_LICENSE("GPL");
+
/* ----------------------------------------------------------------------- */
static void vp3054_bit_setscl(void *data, int state)
diff --git a/drivers/media/video/em28xx/em28xx-input.c b/drivers/media/video/em28xx/em28xx-input.c
index 9b94f77d6fd7..30dfa5370c73 100644
--- a/drivers/media/video/em28xx/em28xx-input.c
+++ b/drivers/media/video/em28xx/em28xx-input.c
@@ -76,6 +76,58 @@ static IR_KEYTAB_TYPE ir_codes_em_terratec[IR_KEYTAB_SIZE] = {
[ 0x40 ] = KEY_ZOOM,
};
+static IR_KEYTAB_TYPE ir_codes_em_pinnacle_usb[IR_KEYTAB_SIZE] = {
+ [ 0x3a ] = KEY_KP0,
+ [ 0x31 ] = KEY_KP1,
+ [ 0x32 ] = KEY_KP2,
+ [ 0x33 ] = KEY_KP3,
+ [ 0x34 ] = KEY_KP4,
+ [ 0x35 ] = KEY_KP5,
+ [ 0x36 ] = KEY_KP6,
+ [ 0x37 ] = KEY_KP7,
+ [ 0x38 ] = KEY_KP8,
+ [ 0x39 ] = KEY_KP9,
+
+ [ 0x2f ] = KEY_POWER,
+
+ [ 0x2e ] = KEY_P,
+ [ 0x1f ] = KEY_L,
+ [ 0x2b ] = KEY_I,
+
+ [ 0x2d ] = KEY_ZOOM,
+ [ 0x1e ] = KEY_ZOOM,
+ [ 0x1b ] = KEY_VOLUMEUP,
+ [ 0x0f ] = KEY_VOLUMEDOWN,
+ [ 0x17 ] = KEY_CHANNELUP,
+ [ 0x1c ] = KEY_CHANNELDOWN,
+ [ 0x25 ] = KEY_INFO,
+
+ [ 0x3c ] = KEY_MUTE,
+
+ [ 0x3d ] = KEY_LEFT,
+ [ 0x3b ] = KEY_RIGHT,
+
+ [ 0x3f ] = KEY_UP,
+ [ 0x3e ] = KEY_DOWN,
+ [ 0x1a ] = KEY_PAUSE,
+
+ [ 0x1d ] = KEY_MENU,
+ [ 0x19 ] = KEY_PLAY,
+ [ 0x16 ] = KEY_REWIND,
+ [ 0x13 ] = KEY_FORWARD,
+ [ 0x15 ] = KEY_PAUSE,
+ [ 0x0e ] = KEY_REWIND,
+ [ 0x0d ] = KEY_PLAY,
+ [ 0x0b ] = KEY_STOP,
+ [ 0x07 ] = KEY_FORWARD,
+ [ 0x27 ] = KEY_RECORD,
+ [ 0x26 ] = KEY_TUNER,
+ [ 0x29 ] = KEY_TEXT,
+ [ 0x2a ] = KEY_MEDIA,
+ [ 0x18 ] = KEY_EPG,
+ [ 0x27 ] = KEY_RECORD,
+};
+
/* ----------------------------------------------------------------------- */
static int get_key_terratec(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
@@ -138,6 +190,28 @@ static int get_key_em_haup(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
return 1;
}
+static int get_key_pinnacle_usb(struct IR_i2c *ir, u32 *ir_key, u32 *ir_raw)
+{
+ unsigned char buf[3];
+
+ /* poll IR chip */
+
+ if (3 != i2c_master_recv(&ir->c,buf,3)) {
+ dprintk("read error\n");
+ return -EIO;
+ }
+
+ dprintk("key %02x\n", buf[2]&0x3f);
+ if (buf[0]!=0x00){
+ return 0;
+ }
+
+ *ir_key = buf[2]&0x3f;
+ *ir_raw = buf[2]&0x3f;
+
+ return 1;
+}
+
/* ----------------------------------------------------------------------- */
void em28xx_set_ir(struct em28xx * dev,struct IR_i2c *ir)
{
@@ -159,6 +233,9 @@ void em28xx_set_ir(struct em28xx * dev,struct IR_i2c *ir)
snprintf(ir->c.name, sizeof(ir->c.name), "i2c IR (EM28XX Terratec)");
break;
case (EM2820_BOARD_PINNACLE_USB_2):
+ ir->ir_codes = ir_codes_em_pinnacle_usb;
+ ir->get_key = get_key_pinnacle_usb;
+ snprintf(ir->c.name, sizeof(ir->c.name), "i2c IR (EM28XX Pinnacle PCTV)");
break;
case (EM2820_BOARD_HAUPPAUGE_WINTV_USB_2):
ir->ir_codes = ir_codes_hauppauge_new;
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 3323dffe26a4..eea304f75176 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -29,6 +29,7 @@
#include <linux/i2c.h>
#include <linux/version.h>
#include <linux/video_decoder.h>
+#include <linux/mutex.h>
#include "em28xx.h"
#include <media/tuner.h>
@@ -191,7 +192,7 @@ static struct v4l2_queryctrl saa711x_qctrl[] = {
static struct usb_driver em28xx_usb_driver;
-static DECLARE_MUTEX(em28xx_sysfs_lock);
+static DEFINE_MUTEX(em28xx_sysfs_lock);
static DECLARE_RWSEM(em28xx_disconnect);
/********************* v4l2 interface ******************************************/
@@ -394,7 +395,7 @@ static int em28xx_v4l2_open(struct inode *inode, struct file *filp)
*/
static void em28xx_release_resources(struct em28xx *dev)
{
- down(&em28xx_sysfs_lock);
+ mutex_lock(&em28xx_sysfs_lock);
em28xx_info("V4L2 device /dev/video%d deregistered\n",
dev->vdev->minor);
@@ -403,7 +404,7 @@ static void em28xx_release_resources(struct em28xx *dev)
/* video_unregister_device(dev->vbi_dev); */
em28xx_i2c_unregister(dev);
usb_put_dev(dev->udev);
- up(&em28xx_sysfs_lock);
+ mutex_unlock(&em28xx_sysfs_lock);
}
/*
diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c
index 9b05a0ab776d..69ed369c2f48 100644
--- a/drivers/media/video/msp3400-driver.c
+++ b/drivers/media/video/msp3400-driver.c
@@ -66,12 +66,12 @@ MODULE_LICENSE("GPL");
/* module parameters */
static int opmode = OPMODE_AUTO;
-int msp_debug = 0; /* msp_debug output */
-int msp_once = 0; /* no continous stereo monitoring */
-int msp_amsound = 0; /* hard-wire AM sound at 6.5 Hz (france),
- the autoscan seems work well only with FM... */
+int msp_debug; /* msp_debug output */
+int msp_once; /* no continous stereo monitoring */
+int msp_amsound; /* hard-wire AM sound at 6.5 Hz (france),
+ the autoscan seems work well only with FM... */
int msp_standard = 1; /* Override auto detect of audio msp_standard, if needed. */
-int msp_dolby = 0;
+int msp_dolby;
int msp_stereo_thresh = 0x190; /* a2 threshold for stereo/bilingual
(msp34xxg only) 0x00a0-0x03c0 */
@@ -1031,8 +1031,8 @@ static int msp_command(struct i2c_client *client, unsigned int cmd, void *arg)
}
default:
- /* nothing */
- break;
+ /* unknown */
+ return -EINVAL;
}
return 0;
}
diff --git a/drivers/media/video/msp3400.h b/drivers/media/video/msp3400.h
index 70a5ef8ba017..a9ac57d0700b 100644
--- a/drivers/media/video/msp3400.h
+++ b/drivers/media/video/msp3400.h
@@ -6,14 +6,6 @@
/* ---------------------------------------------------------------------- */
-struct msp_matrix {
- int input;
- int output;
-};
-
-/* ioctl for MSP_SET_MATRIX will have to be registered */
-#define MSP_SET_MATRIX _IOW('m',17,struct msp_matrix)
-
/* This macro is allowed for *constants* only, gcc must calculate it
at compile time. Remember -- no floats in kernel mode */
#define MSP_CARRIER(freq) ((int)((float)(freq / 18.432) * (1 << 24)))
diff --git a/drivers/media/video/mt20xx.c b/drivers/media/video/mt20xx.c
index 0bf1caac5887..c7c9f3f8715c 100644
--- a/drivers/media/video/mt20xx.c
+++ b/drivers/media/video/mt20xx.c
@@ -353,8 +353,8 @@ static int mt2032_init(struct i2c_client *c)
} while (xok != 1 );
t->xogc=xogc;
- t->tv_freq = mt2032_set_tv_freq;
- t->radio_freq = mt2032_set_radio_freq;
+ t->set_tv_freq = mt2032_set_tv_freq;
+ t->set_radio_freq = mt2032_set_radio_freq;
return(1);
}
@@ -481,8 +481,8 @@ static int mt2050_init(struct i2c_client *c)
i2c_master_recv(c,buf,1);
tuner_dbg("mt2050: sro is %x\n",buf[0]);
- t->tv_freq = mt2050_set_tv_freq;
- t->radio_freq = mt2050_set_radio_freq;
+ t->set_tv_freq = mt2050_set_tv_freq;
+ t->set_radio_freq = mt2050_set_radio_freq;
return 0;
}
@@ -494,8 +494,8 @@ int microtune_init(struct i2c_client *c)
int company_code;
memset(buf,0,sizeof(buf));
- t->tv_freq = NULL;
- t->radio_freq = NULL;
+ t->set_tv_freq = NULL;
+ t->set_radio_freq = NULL;
t->standby = NULL;
if (t->std & V4L2_STD_525_60) {
tuner_dbg("pinnacle ntsc\n");
diff --git a/drivers/media/video/planb.c b/drivers/media/video/planb.c
index b19c33434eaf..f3fc361bec97 100644
--- a/drivers/media/video/planb.c
+++ b/drivers/media/video/planb.c
@@ -76,9 +76,9 @@ static volatile struct planb_registers *planb_regs;
static int def_norm = PLANB_DEF_NORM; /* default norm */
static int video_nr = -1;
-MODULE_PARM(def_norm, "i");
+module_param(def_norm, int, 0);
MODULE_PARM_DESC(def_norm, "Default startup norm (0=PAL, 1=NTSC, 2=SECAM)");
-MODULE_PARM(video_nr,"i");
+module_param(video_nr, int, 0);
MODULE_LICENSE("GPL");
diff --git a/drivers/media/video/saa6588.c b/drivers/media/video/saa6588.c
index e70b17ef36e9..d17395c4f55c 100644
--- a/drivers/media/video/saa6588.c
+++ b/drivers/media/video/saa6588.c
@@ -50,15 +50,15 @@ static unsigned int rbds = 0;
static unsigned int plvl = 0;
static unsigned int bufblocks = 100;
-MODULE_PARM(debug, "i");
+module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "enable debug messages");
-MODULE_PARM(xtal, "i");
+module_param(xtal, int, 0);
MODULE_PARM_DESC(xtal, "select oscillator frequency (0..3), default 0");
-MODULE_PARM(rbds, "i");
+module_param(rbds, int, 0);
MODULE_PARM_DESC(rbds, "select mode, 0=RDS, 1=RBDS, default 0");
-MODULE_PARM(plvl, "i");
+module_param(plvl, int, 0);
MODULE_PARM_DESC(plvl, "select pause level (0..3), default 0");
-MODULE_PARM(bufblocks, "i");
+module_param(bufblocks, int, 0);
MODULE_PARM_DESC(bufblocks, "number of buffered blocks, default 100");
MODULE_DESCRIPTION("v4l2 driver module for SAA6588 RDS decoder");
diff --git a/drivers/media/video/saa711x.c b/drivers/media/video/saa711x.c
index ae53063875f9..6c161f2f5e2c 100644
--- a/drivers/media/video/saa711x.c
+++ b/drivers/media/video/saa711x.c
@@ -52,7 +52,7 @@ MODULE_LICENSE("GPL");
#include <linux/video_decoder.h>
static int debug = 0;
-MODULE_PARM(debug, "i");
+module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, " Set the default Debug level. Default: 0 (Off) - (0-1)");
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 275d06af69d2..c64718aec9cb 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -2515,6 +2515,7 @@ struct saa7134_board saa7134_boards[] = {
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.mpeg = SAA7134_MPEG_DVB,
+ .gpiomask = 1 << 21,
.inputs = {{
.name = name_tv,
.vmux = 1,
@@ -2529,6 +2530,11 @@ struct saa7134_board saa7134_boards[] = {
.vmux = 8,
.amux = LINE1,
}},
+ .radio = {
+ .name = name_radio,
+ .amux = TV,
+ .gpio = 0x0200000,
+ },
},
[SAA7134_BOARD_MSI_TVATANYWHERE_PLUS] = {
.name = "MSI TV@Anywhere plus",
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index 3983a6524cac..028904bd94a2 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -31,6 +31,7 @@
#include <linux/sound.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <linux/mutex.h>
#include "saa7134-reg.h"
#include "saa7134.h"
@@ -84,7 +85,7 @@ MODULE_PARM_DESC(radio_nr, "radio device number");
MODULE_PARM_DESC(tuner, "tuner type");
MODULE_PARM_DESC(card, "card type");
-static DECLARE_MUTEX(devlist_lock);
+static DEFINE_MUTEX(devlist_lock);
LIST_HEAD(saa7134_devlist);
static LIST_HEAD(mops_list);
static unsigned int saa7134_devcount;
@@ -140,7 +141,7 @@ static int pending_call(struct notifier_block *self, unsigned long state,
return NOTIFY_DONE;
}
-static int pending_registered=0;
+static int pending_registered;
static struct notifier_block pending_notifier = {
.notifier_call = pending_call,
};
@@ -969,13 +970,13 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev,
pci_set_drvdata(pci_dev,dev);
saa7134_devcount++;
- down(&devlist_lock);
+ mutex_lock(&devlist_lock);
list_for_each(item,&mops_list) {
mops = list_entry(item, struct saa7134_mpeg_ops, next);
mpeg_ops_attach(mops, dev);
}
list_add_tail(&dev->devlist,&saa7134_devlist);
- up(&devlist_lock);
+ mutex_unlock(&devlist_lock);
/* check for signal */
saa7134_irq_video_intl(dev);
@@ -1031,13 +1032,13 @@ static void __devexit saa7134_finidev(struct pci_dev *pci_dev)
saa7134_hwfini(dev);
/* unregister */
- down(&devlist_lock);
+ mutex_lock(&devlist_lock);
list_del(&dev->devlist);
list_for_each(item,&mops_list) {
mops = list_entry(item, struct saa7134_mpeg_ops, next);
mpeg_ops_detach(mops, dev);
}
- up(&devlist_lock);
+ mutex_unlock(&devlist_lock);
saa7134_devcount--;
saa7134_i2c_unregister(dev);
@@ -1071,13 +1072,13 @@ int saa7134_ts_register(struct saa7134_mpeg_ops *ops)
struct list_head *item;
struct saa7134_dev *dev;
- down(&devlist_lock);
+ mutex_lock(&devlist_lock);
list_for_each(item,&saa7134_devlist) {
dev = list_entry(item, struct saa7134_dev, devlist);
mpeg_ops_attach(ops, dev);
}
list_add_tail(&ops->next,&mops_list);
- up(&devlist_lock);
+ mutex_unlock(&devlist_lock);
return 0;
}
@@ -1086,13 +1087,13 @@ void saa7134_ts_unregister(struct saa7134_mpeg_ops *ops)
struct list_head *item;
struct saa7134_dev *dev;
- down(&devlist_lock);
+ mutex_lock(&devlist_lock);
list_del(&ops->next);
list_for_each(item,&saa7134_devlist) {
dev = list_entry(item, struct saa7134_dev, devlist);
mpeg_ops_detach(ops, dev);
}
- up(&devlist_lock);
+ mutex_unlock(&devlist_lock);
}
EXPORT_SYMBOL(saa7134_ts_register);
diff --git a/drivers/media/video/saa7134/saa7134-tvaudio.c b/drivers/media/video/saa7134/saa7134-tvaudio.c
index 93268427750d..afa4dcb3f96d 100644
--- a/drivers/media/video/saa7134/saa7134-tvaudio.c
+++ b/drivers/media/video/saa7134/saa7134-tvaudio.c
@@ -180,8 +180,8 @@ static void tvaudio_init(struct saa7134_dev *dev)
saa_writeb(SAA7134_AUDIO_CLOCK0, clock & 0xff);
saa_writeb(SAA7134_AUDIO_CLOCK1, (clock >> 8) & 0xff);
saa_writeb(SAA7134_AUDIO_CLOCK2, (clock >> 16) & 0xff);
- // frame locked audio was reported not to be reliable
- saa_writeb(SAA7134_AUDIO_PLL_CTRL, 0x02);
+ /* frame locked audio is mandatory for NICAM */
+ saa_writeb(SAA7134_AUDIO_PLL_CTRL, 0x01);
saa_writeb(SAA7134_NICAM_ERROR_LOW, 0x14);
saa_writeb(SAA7134_NICAM_ERROR_HIGH, 0x50);
@@ -809,7 +809,12 @@ static int tvaudio_thread_ddep(void *data)
dprintk("ddep override: %s\n",stdres[audio_ddep]);
} else if (&card(dev).radio == dev->input) {
dprintk("FM Radio\n");
- norms = (0x0f << 2) | 0x01;
+ if (dev->tuner_type == TUNER_PHILIPS_TDA8290) {
+ norms = (0x11 << 2) | 0x01;
+ saa_dsp_writel(dev, 0x42c >> 2, 0x729555);
+ } else {
+ norms = (0x0f << 2) | 0x01;
+ }
} else {
/* (let chip) scan for sound carrier */
norms = 0;
diff --git a/drivers/media/video/tda8290.c b/drivers/media/video/tda8290.c
index 2498b76df429..7b4fb282ac82 100644
--- a/drivers/media/video/tda8290.c
+++ b/drivers/media/video/tda8290.c
@@ -567,8 +567,8 @@ int tda8290_init(struct i2c_client *c)
}
tuner_info("tuner: type set to %s\n", c->name);
- t->tv_freq = set_tv_freq;
- t->radio_freq = set_radio_freq;
+ t->set_tv_freq = set_tv_freq;
+ t->set_radio_freq = set_radio_freq;
t->has_signal = has_signal;
t->standby = standby;
t->tda827x_lpsel = 0;
diff --git a/drivers/media/video/tea5767.c b/drivers/media/video/tea5767.c
index 921fe72f23d5..c2b98f81c192 100644
--- a/drivers/media/video/tea5767.c
+++ b/drivers/media/video/tea5767.c
@@ -62,7 +62,7 @@ extern int tuner_debug;
#define TEA5767_PORT1_HIGH 0x01
-/* Forth register */
+/* Fourth register */
#define TEA5767_PORT2_HIGH 0x80
/* Chips stops working. Only I2C bus remains on */
#define TEA5767_STDBY 0x40
@@ -85,7 +85,7 @@ extern int tuner_debug;
/* If activate PORT 1 indicates SEARCH or else it is used as PORT1 */
#define TEA5767_SRCH_IND 0x01
-/* Fiveth register */
+/* Fifth register */
/* By activating, it will use Xtal at 13 MHz as reference for divider */
#define TEA5767_PLLREF_ENABLE 0x80
@@ -109,13 +109,13 @@ extern int tuner_debug;
#define TEA5767_STEREO_MASK 0x80
#define TEA5767_IF_CNTR_MASK 0x7f
-/* Four register */
+/* Fourth register */
#define TEA5767_ADC_LEVEL_MASK 0xf0
/* should be 0 */
#define TEA5767_CHIP_ID_MASK 0x0f
-/* Fiveth register */
+/* Fifth register */
/* Reserved for future extensions */
#define TEA5767_RESERVED_MASK 0xff
@@ -220,19 +220,19 @@ static void set_radio_freq(struct i2c_client *c, unsigned int frq)
tuner_dbg ("TEA5767 radio HIGH LO inject xtal @ 13 MHz\n");
buffer[2] |= TEA5767_HIGH_LO_INJECT;
buffer[4] |= TEA5767_PLLREF_ENABLE;
- div = (frq * 4000 / 16 + 700000 + 225000 + 25000) / 50000;
+ div = (frq * (4000 / 16) + 700000 + 225000 + 25000) / 50000;
break;
case TEA5767_LOW_LO_13MHz:
tuner_dbg ("TEA5767 radio LOW LO inject xtal @ 13 MHz\n");
buffer[4] |= TEA5767_PLLREF_ENABLE;
- div = (frq * 4000 / 16 - 700000 - 225000 + 25000) / 50000;
+ div = (frq * (4000 / 16) - 700000 - 225000 + 25000) / 50000;
break;
case TEA5767_LOW_LO_32768:
tuner_dbg ("TEA5767 radio LOW LO inject xtal @ 32,768 MHz\n");
buffer[3] |= TEA5767_XTAL_32768;
/* const 700=4000*175 Khz - to adjust freq to right value */
- div = ((frq * 4000 / 16 - 700000 - 225000) + 16384) >> 15;
+ div = ((frq * (4000 / 16) - 700000 - 225000) + 16384) >> 15;
break;
case TEA5767_HIGH_LO_32768:
default:
@@ -350,8 +350,8 @@ int tea5767_tuner_init(struct i2c_client *c)
tuner_info("type set to %d (%s)\n", t->type, "Philips TEA5767HN FM Radio");
strlcpy(c->name, "tea5767", sizeof(c->name));
- t->tv_freq = set_tv_freq;
- t->radio_freq = set_radio_freq;
+ t->set_tv_freq = set_tv_freq;
+ t->set_radio_freq = set_radio_freq;
t->has_signal = tea5767_signal;
t->is_stereo = tea5767_stereo;
t->standby = tea5767_standby;
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index f30ef79d795e..2995b22acb43 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -82,7 +82,7 @@ static void set_tv_freq(struct i2c_client *c, unsigned int freq)
tuner_warn ("tuner type not set\n");
return;
}
- if (NULL == t->tv_freq) {
+ if (NULL == t->set_tv_freq) {
tuner_warn ("Tuner has no way to set tv freq\n");
return;
}
@@ -90,8 +90,14 @@ static void set_tv_freq(struct i2c_client *c, unsigned int freq)
tuner_dbg ("TV freq (%d.%02d) out of range (%d-%d)\n",
freq / 16, freq % 16 * 100 / 16, tv_range[0],
tv_range[1]);
+ /* V4L2 spec: if the freq is not possible then the closest
+ possible value should be selected */
+ if (freq < tv_range[0] * 16)
+ freq = tv_range[0] * 16;
+ else
+ freq = tv_range[1] * 16;
}
- t->tv_freq(c, freq);
+ t->set_tv_freq(c, freq);
}
static void set_radio_freq(struct i2c_client *c, unsigned int freq)
@@ -102,18 +108,23 @@ static void set_radio_freq(struct i2c_client *c, unsigned int freq)
tuner_warn ("tuner type not set\n");
return;
}
- if (NULL == t->radio_freq) {
+ if (NULL == t->set_radio_freq) {
tuner_warn ("tuner has no way to set radio frequency\n");
return;
}
- if (freq <= radio_range[0] * 16000 || freq >= radio_range[1] * 16000) {
+ if (freq < radio_range[0] * 16000 || freq > radio_range[1] * 16000) {
tuner_dbg ("radio freq (%d.%02d) out of range (%d-%d)\n",
freq / 16000, freq % 16000 * 100 / 16000,
radio_range[0], radio_range[1]);
+ /* V4L2 spec: if the freq is not possible then the closest
+ possible value should be selected */
+ if (freq < radio_range[0] * 16000)
+ freq = radio_range[0] * 16000;
+ else
+ freq = radio_range[1] * 16000;
}
- t->radio_freq(c, freq);
- return;
+ t->set_radio_freq(c, freq);
}
static void set_freq(struct i2c_client *c, unsigned long freq)
@@ -125,15 +136,16 @@ static void set_freq(struct i2c_client *c, unsigned long freq)
tuner_dbg("radio freq set to %lu.%02lu\n",
freq / 16000, freq % 16000 * 100 / 16000);
set_radio_freq(c, freq);
+ t->radio_freq = freq;
break;
case V4L2_TUNER_ANALOG_TV:
case V4L2_TUNER_DIGITAL_TV:
tuner_dbg("tv freq set to %lu.%02lu\n",
freq / 16, freq % 16 * 100 / 16);
set_tv_freq(c, freq);
+ t->tv_freq = freq;
break;
}
- t->freq = freq;
}
static void set_type(struct i2c_client *c, unsigned int type,
@@ -212,7 +224,7 @@ static void set_type(struct i2c_client *c, unsigned int type,
if (t->mode_mask == T_UNINITIALIZED)
t->mode_mask = new_mode_mask;
- set_freq(c, t->freq);
+ set_freq(c, (V4L2_TUNER_RADIO == t->mode) ? t->radio_freq : t->tv_freq);
tuner_dbg("%s %s I2C addr 0x%02x with type %d used for 0x%02x\n",
c->adapter->name, c->driver->driver.name, c->addr << 1, type,
t->mode_mask);
@@ -377,11 +389,11 @@ static void tuner_status(struct i2c_client *client)
default: p = "undefined"; break;
}
if (t->mode == V4L2_TUNER_RADIO) {
- freq = t->freq / 16000;
- freq_fraction = (t->freq % 16000) * 100 / 16000;
+ freq = t->radio_freq / 16000;
+ freq_fraction = (t->radio_freq % 16000) * 100 / 16000;
} else {
- freq = t->freq / 16;
- freq_fraction = (t->freq % 16) * 100 / 16;
+ freq = t->tv_freq / 16;
+ freq_fraction = (t->tv_freq % 16) * 100 / 16;
}
tuner_info("Tuner mode: %s\n", p);
tuner_info("Frequency: %lu.%02lu MHz\n", freq, freq_fraction);
@@ -456,7 +468,7 @@ static int tuner_attach(struct i2c_adapter *adap, int addr, int kind)
t->type = TUNER_TEA5767;
t->mode_mask = T_RADIO;
t->mode = T_STANDBY;
- t->freq = 87.5 * 16; /* Sets freq to FM range */
+ t->radio_freq = 87.5 * 16000; /* Sets freq to FM range */
default_mode_mask &= ~T_RADIO;
goto register_client;
@@ -469,7 +481,8 @@ static int tuner_attach(struct i2c_adapter *adap, int addr, int kind)
if (default_mode_mask != T_UNINITIALIZED) {
tuner_dbg ("Setting mode_mask to 0x%02x\n", default_mode_mask);
t->mode_mask = default_mode_mask;
- t->freq = 400 * 16; /* Sets freq to VHF High */
+ t->tv_freq = 400 * 16; /* Sets freq to VHF High */
+ t->radio_freq = 87.5 * 16000; /* Sets freq to FM range */
default_mode_mask = T_UNINITIALIZED;
}
@@ -565,16 +578,18 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
set_addr(client, (struct tuner_setup *)arg);
break;
case AUDC_SET_RADIO:
- set_mode(client,t,V4L2_TUNER_RADIO, "AUDC_SET_RADIO");
+ if (set_mode(client, t, V4L2_TUNER_RADIO, "AUDC_SET_RADIO")
+ == EINVAL)
+ return 0;
+ if (t->radio_freq)
+ set_freq(client, t->radio_freq);
break;
case TUNER_SET_STANDBY:
- {
- if (check_mode(t, "TUNER_SET_STANDBY") == EINVAL)
- return 0;
- if (t->standby)
- t->standby (client);
- break;
- }
+ if (check_mode(t, "TUNER_SET_STANDBY") == EINVAL)
+ return 0;
+ if (t->standby)
+ t->standby (client);
+ break;
case VIDIOCSAUDIO:
if (check_mode(t, "VIDIOCSAUDIO") == EINVAL)
return 0;
@@ -583,7 +598,6 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
/* Should be implemented, since bttv calls it */
tuner_dbg("VIDIOCSAUDIO not implemented.\n");
-
break;
/* --- v4l ioctls --- */
/* take care: bttv does userspace copying, we'll get a
@@ -609,8 +623,8 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
if (vc->norm < ARRAY_SIZE(map))
t->std = map[vc->norm];
tuner_fixup_std(t);
- if (t->freq)
- set_tv_freq(client, t->freq);
+ if (t->tv_freq)
+ set_tv_freq(client, t->tv_freq);
return 0;
}
case VIDIOCSFREQ:
@@ -684,15 +698,14 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
t->std = *id;
tuner_fixup_std(t);
- if (t->freq)
- set_freq(client, t->freq);
+ if (t->tv_freq)
+ set_freq(client, t->tv_freq);
break;
}
case VIDIOC_S_FREQUENCY:
{
struct v4l2_frequency *f = arg;
- t->freq = f->frequency;
switch_v4l2();
if (V4L2_TUNER_RADIO == f->type &&
V4L2_TUNER_RADIO != t->mode) {
@@ -700,7 +713,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
== EINVAL)
return 0;
}
- set_freq(client,t->freq);
+ set_freq(client,f->frequency);
break;
}
@@ -712,7 +725,8 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
return 0;
switch_v4l2();
f->type = t->mode;
- f->frequency = t->freq;
+ f->frequency = (V4L2_TUNER_RADIO == t->mode) ?
+ t->radio_freq : t->tv_freq;
break;
}
case VIDIOC_G_TUNER:
@@ -763,7 +777,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
if (V4L2_TUNER_RADIO == t->mode) {
t->audmode = tuner->audmode;
- set_radio_freq(client, t->freq);
+ set_radio_freq(client, t->radio_freq);
}
break;
}
@@ -791,8 +805,13 @@ static int tuner_resume(struct device *dev)
struct tuner *t = i2c_get_clientdata (c);
tuner_dbg ("resume\n");
- if (t->freq)
- set_freq(c, t->freq);
+ if (V4L2_TUNER_RADIO == t->mode) {
+ if (t->radio_freq)
+ set_freq(c, t->radio_freq);
+ } else {
+ if (t->tv_freq)
+ set_freq(c, t->tv_freq);
+ }
return 0;
}
diff --git a/drivers/media/video/tuner-simple.c b/drivers/media/video/tuner-simple.c
index e5fb74365836..37977ff49780 100644
--- a/drivers/media/video/tuner-simple.c
+++ b/drivers/media/video/tuner-simple.c
@@ -79,722 +79,16 @@ MODULE_PARM_DESC(offset,"Allows to specify an offset for tuner");
#define TUNER_PLL_LOCKED 0x40
#define TUNER_STEREO_MK3 0x04
-#define TUNER_MAX_RANGES 3
-
-/* ---------------------------------------------------------------------- */
-
-struct tunertype
-{
- char *name;
-
- int count;
- struct {
- unsigned short thresh;
- unsigned char cb;
- } ranges[TUNER_MAX_RANGES];
- unsigned char config;
-};
-
-/*
- * The floats in the tuner struct are computed at compile time
- * by gcc and cast back to integers. Thus we don't violate the
- * "no float in kernel" rule.
+#define TUNER_PARAM_ANALOG 0 /* to be removed */
+/* FIXME:
+ * Right now, all tuners are using the first tuner_params[] array element
+ * for analog mode. In the future, we will be merging similar tuner
+ * definitions together, such that each tuner definition will have a
+ * tuner_params struct for each available video standard. At that point,
+ * TUNER_PARAM_ANALOG will be removed, and the tuner_params[] array
+ * element will be chosen based on the video standard in use.
+ *
*/
-static struct tunertype tuners[] = {
- /* 0-9 */
- [TUNER_TEMIC_PAL] = { /* TEMIC PAL */
- .name = "Temic PAL (4002 FH5)",
- .count = 3,
- .ranges = {
- { 16 * 140.25 /*MHz*/, 0x02, },
- { 16 * 463.25 /*MHz*/, 0x04, },
- { 16 * 999.99 , 0x01, },
- },
- .config = 0x8e,
- },
- [TUNER_PHILIPS_PAL_I] = { /* Philips PAL_I */
- .name = "Philips PAL_I (FI1246 and compatibles)",
- .count = 3,
- .ranges = {
- { 16 * 140.25 /*MHz*/, 0xa0, },
- { 16 * 463.25 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
- [TUNER_PHILIPS_NTSC] = { /* Philips NTSC */
- .name = "Philips NTSC (FI1236,FM1236 and compatibles)",
- .count = 3,
- .ranges = {
- { 16 * 157.25 /*MHz*/, 0xa0, },
- { 16 * 451.25 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
- [TUNER_PHILIPS_SECAM] = { /* Philips SECAM */
- .name = "Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF)",
- .count = 3,
- .ranges = {
- { 16 * 168.25 /*MHz*/, 0xa7, },
- { 16 * 447.25 /*MHz*/, 0x97, },
- { 16 * 999.99 , 0x37, },
- },
- .config = 0x8e,
- },
- [TUNER_ABSENT] = { /* Tuner Absent */
- .name = "NoTuner",
- .count = 1,
- .ranges = {
- { 0, 0x00, },
- },
- .config = 0x00,
- },
- [TUNER_PHILIPS_PAL] = { /* Philips PAL */
- .name = "Philips PAL_BG (FI1216 and compatibles)",
- .count = 3,
- .ranges = {
- { 16 * 168.25 /*MHz*/, 0xa0, },
- { 16 * 447.25 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
- [TUNER_TEMIC_NTSC] = { /* TEMIC NTSC */
- .name = "Temic NTSC (4032 FY5)",
- .count = 3,
- .ranges = {
- { 16 * 157.25 /*MHz*/, 0x02, },
- { 16 * 463.25 /*MHz*/, 0x04, },
- { 16 * 999.99 , 0x01, },
- },
- .config = 0x8e,
- },
- [TUNER_TEMIC_PAL_I] = { /* TEMIC PAL_I */
- .name = "Temic PAL_I (4062 FY5)",
- .count = 3,
- .ranges = {
- { 16 * 170.00 /*MHz*/, 0x02, },
- { 16 * 450.00 /*MHz*/, 0x04, },
- { 16 * 999.99 , 0x01, },
- },
- .config = 0x8e,
- },
- [TUNER_TEMIC_4036FY5_NTSC] = { /* TEMIC NTSC */
- .name = "Temic NTSC (4036 FY5)",
- .count = 3,
- .ranges = {
- { 16 * 157.25 /*MHz*/, 0xa0, },
- { 16 * 463.25 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
- [TUNER_ALPS_TSBH1_NTSC] = { /* TEMIC NTSC */
- .name = "Alps HSBH1",
- .count = 3,
- .ranges = {
- { 16 * 137.25 /*MHz*/, 0x01, },
- { 16 * 385.25 /*MHz*/, 0x02, },
- { 16 * 999.99 , 0x08, },
- },
- .config = 0x8e,
- },
-
- /* 10-19 */
- [TUNER_ALPS_TSBE1_PAL] = { /* TEMIC PAL */
- .name = "Alps TSBE1",
- .count = 3,
- .ranges = {
- { 16 * 137.25 /*MHz*/, 0x01, },
- { 16 * 385.25 /*MHz*/, 0x02, },
- { 16 * 999.99 , 0x08, },
- },
- .config = 0x8e,
- },
- [TUNER_ALPS_TSBB5_PAL_I] = { /* Alps PAL_I */
- .name = "Alps TSBB5",
- .count = 3,
- .ranges = {
- { 16 * 133.25 /*MHz*/, 0x01, },
- { 16 * 351.25 /*MHz*/, 0x02, },
- { 16 * 999.99 , 0x08, },
- },
- .config = 0x8e,
- },
- [TUNER_ALPS_TSBE5_PAL] = { /* Alps PAL */
- .name = "Alps TSBE5",
- .count = 3,
- .ranges = {
- { 16 * 133.25 /*MHz*/, 0x01, },
- { 16 * 351.25 /*MHz*/, 0x02, },
- { 16 * 999.99 , 0x08, },
- },
- .config = 0x8e,
- },
- [TUNER_ALPS_TSBC5_PAL] = { /* Alps PAL */
- .name = "Alps TSBC5",
- .count = 3,
- .ranges = {
- { 16 * 133.25 /*MHz*/, 0x01, },
- { 16 * 351.25 /*MHz*/, 0x02, },
- { 16 * 999.99 , 0x08, },
- },
- .config = 0x8e,
- },
- [TUNER_TEMIC_4006FH5_PAL] = { /* TEMIC PAL */
- .name = "Temic PAL_BG (4006FH5)",
- .count = 3,
- .ranges = {
- { 16 * 170.00 /*MHz*/, 0xa0, },
- { 16 * 450.00 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
- [TUNER_ALPS_TSHC6_NTSC] = { /* Alps NTSC */
- .name = "Alps TSCH6",
- .count = 3,
- .ranges = {
- { 16 * 137.25 /*MHz*/, 0x14, },
- { 16 * 385.25 /*MHz*/, 0x12, },
- { 16 * 999.99 , 0x11, },
- },
- .config = 0x8e,
- },
- [TUNER_TEMIC_PAL_DK] = { /* TEMIC PAL */
- .name = "Temic PAL_DK (4016 FY5)",
- .count = 3,
- .ranges = {
- { 16 * 168.25 /*MHz*/, 0xa0, },
- { 16 * 456.25 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
- [TUNER_PHILIPS_NTSC_M] = { /* Philips NTSC */
- .name = "Philips NTSC_M (MK2)",
- .count = 3,
- .ranges = {
- { 16 * 160.00 /*MHz*/, 0xa0, },
- { 16 * 454.00 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
- [TUNER_TEMIC_4066FY5_PAL_I] = { /* TEMIC PAL_I */
- .name = "Temic PAL_I (4066 FY5)",
- .count = 3,
- .ranges = {
- { 16 * 169.00 /*MHz*/, 0xa0, },
- { 16 * 454.00 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
- [TUNER_TEMIC_4006FN5_MULTI_PAL] = { /* TEMIC PAL */
- .name = "Temic PAL* auto (4006 FN5)",
- .count = 3,
- .ranges = {
- { 16 * 169.00 /*MHz*/, 0xa0, },
- { 16 * 454.00 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
-
- /* 20-29 */
- [TUNER_TEMIC_4009FR5_PAL] = { /* TEMIC PAL */
- .name = "Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5)",
- .count = 3,
- .ranges = {
- { 16 * 141.00 /*MHz*/, 0xa0, },
- { 16 * 464.00 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
- [TUNER_TEMIC_4039FR5_NTSC] = { /* TEMIC NTSC */
- .name = "Temic NTSC (4039 FR5)",
- .count = 3,
- .ranges = {
- { 16 * 158.00 /*MHz*/, 0xa0, },
- { 16 * 453.00 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
- [TUNER_TEMIC_4046FM5] = { /* TEMIC PAL */
- .name = "Temic PAL/SECAM multi (4046 FM5)",
- .count = 3,
- .ranges = {
- { 16 * 169.00 /*MHz*/, 0xa0, },
- { 16 * 454.00 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
- [TUNER_PHILIPS_PAL_DK] = { /* Philips PAL */
- .name = "Philips PAL_DK (FI1256 and compatibles)",
- .count = 3,
- .ranges = {
- { 16 * 170.00 /*MHz*/, 0xa0, },
- { 16 * 450.00 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
- [TUNER_PHILIPS_FQ1216ME] = { /* Philips PAL */
- .name = "Philips PAL/SECAM multi (FQ1216ME)",
- .count = 3,
- .ranges = {
- { 16 * 170.00 /*MHz*/, 0xa0, },
- { 16 * 450.00 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
- [TUNER_LG_PAL_I_FM] = { /* LGINNOTEK PAL_I */
- .name = "LG PAL_I+FM (TAPC-I001D)",
- .count = 3,
- .ranges = {
- { 16 * 170.00 /*MHz*/, 0xa0, },
- { 16 * 450.00 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
- [TUNER_LG_PAL_I] = { /* LGINNOTEK PAL_I */
- .name = "LG PAL_I (TAPC-I701D)",
- .count = 3,
- .ranges = {
- { 16 * 170.00 /*MHz*/, 0xa0, },
- { 16 * 450.00 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
- [TUNER_LG_NTSC_FM] = { /* LGINNOTEK NTSC */
- .name = "LG NTSC+FM (TPI8NSR01F)",
- .count = 3,
- .ranges = {
- { 16 * 210.00 /*MHz*/, 0xa0, },
- { 16 * 497.00 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
- [TUNER_LG_PAL_FM] = { /* LGINNOTEK PAL */
- .name = "LG PAL_BG+FM (TPI8PSB01D)",
- .count = 3,
- .ranges = {
- { 16 * 170.00 /*MHz*/, 0xa0, },
- { 16 * 450.00 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
- [TUNER_LG_PAL] = { /* LGINNOTEK PAL */
- .name = "LG PAL_BG (TPI8PSB11D)",
- .count = 3,
- .ranges = {
- { 16 * 170.00 /*MHz*/, 0xa0, },
- { 16 * 450.00 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
-
- /* 30-39 */
- [TUNER_TEMIC_4009FN5_MULTI_PAL_FM] = { /* TEMIC PAL */
- .name = "Temic PAL* auto + FM (4009 FN5)",
- .count = 3,
- .ranges = {
- { 16 * 141.00 /*MHz*/, 0xa0, },
- { 16 * 464.00 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
- [TUNER_SHARP_2U5JF5540_NTSC] = { /* SHARP NTSC */
- .name = "SHARP NTSC_JP (2U5JF5540)",
- .count = 3,
- .ranges = {
- { 16 * 137.25 /*MHz*/, 0x01, },
- { 16 * 317.25 /*MHz*/, 0x02, },
- { 16 * 999.99 , 0x08, },
- },
- .config = 0x8e,
- },
- [TUNER_Samsung_PAL_TCPM9091PD27] = { /* Samsung PAL */
- .name = "Samsung PAL TCPM9091PD27",
- .count = 3,
- .ranges = {
- { 16 * 169 /*MHz*/, 0xa0, },
- { 16 * 464 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
- [TUNER_MT2032] = { /* Microtune PAL|NTSC */
- .name = "MT20xx universal",
- /* see mt20xx.c for details */ },
- [TUNER_TEMIC_4106FH5] = { /* TEMIC PAL */
- .name = "Temic PAL_BG (4106 FH5)",
- .count = 3,
- .ranges = {
- { 16 * 141.00 /*MHz*/, 0xa0, },
- { 16 * 464.00 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
- [TUNER_TEMIC_4012FY5] = { /* TEMIC PAL */
- .name = "Temic PAL_DK/SECAM_L (4012 FY5)",
- .count = 3,
- .ranges = {
- { 16 * 140.25 /*MHz*/, 0x02, },
- { 16 * 463.25 /*MHz*/, 0x04, },
- { 16 * 999.99 , 0x01, },
- },
- .config = 0x8e,
- },
- [TUNER_TEMIC_4136FY5] = { /* TEMIC NTSC */
- .name = "Temic NTSC (4136 FY5)",
- .count = 3,
- .ranges = {
- { 16 * 158.00 /*MHz*/, 0xa0, },
- { 16 * 453.00 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
- [TUNER_LG_PAL_NEW_TAPC] = { /* LGINNOTEK PAL */
- .name = "LG PAL (newer TAPC series)",
- .count = 3,
- .ranges = {
- { 16 * 170.00 /*MHz*/, 0x01, },
- { 16 * 450.00 /*MHz*/, 0x02, },
- { 16 * 999.99 , 0x08, },
- },
- .config = 0x8e,
- },
- [TUNER_PHILIPS_FM1216ME_MK3] = { /* Philips PAL */
- .name = "Philips PAL/SECAM multi (FM1216ME MK3)",
- .count = 3,
- .ranges = {
- { 16 * 158.00 /*MHz*/, 0x01, },
- { 16 * 442.00 /*MHz*/, 0x02, },
- { 16 * 999.99 , 0x04, },
- },
- .config = 0x8e,
- },
- [TUNER_LG_NTSC_NEW_TAPC] = { /* LGINNOTEK NTSC */
- .name = "LG NTSC (newer TAPC series)",
- .count = 3,
- .ranges = {
- { 16 * 170.00 /*MHz*/, 0x01, },
- { 16 * 450.00 /*MHz*/, 0x02, },
- { 16 * 999.99 , 0x08, },
- },
- .config = 0x8e,
- },
-
- /* 40-49 */
- [TUNER_HITACHI_NTSC] = { /* HITACHI NTSC */
- .name = "HITACHI V7-J180AT",
- .count = 3,
- .ranges = {
- { 16 * 170.00 /*MHz*/, 0x01, },
- { 16 * 450.00 /*MHz*/, 0x02, },
- { 16 * 999.99 , 0x08, },
- },
- .config = 0x8e,
- },
- [TUNER_PHILIPS_PAL_MK] = { /* Philips PAL */
- .name = "Philips PAL_MK (FI1216 MK)",
- .count = 3,
- .ranges = {
- { 16 * 140.25 /*MHz*/, 0x01, },
- { 16 * 463.25 /*MHz*/, 0xc2, },
- { 16 * 999.99 , 0xcf, },
- },
- .config = 0x8e,
- },
- [TUNER_PHILIPS_ATSC] = { /* Philips ATSC */
- .name = "Philips 1236D ATSC/NTSC dual in",
- .count = 3,
- .ranges = {
- { 16 * 157.25 /*MHz*/, 0xa0, },
- { 16 * 454.00 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
- [TUNER_PHILIPS_FM1236_MK3] = { /* Philips NTSC */
- .name = "Philips NTSC MK3 (FM1236MK3 or FM1236/F)",
- .count = 3,
- .ranges = {
- { 16 * 160.00 /*MHz*/, 0x01, },
- { 16 * 442.00 /*MHz*/, 0x02, },
- { 16 * 999.99 , 0x04, },
- },
- .config = 0x8e,
- },
- [TUNER_PHILIPS_4IN1] = { /* Philips NTSC */
- .name = "Philips 4 in 1 (ATI TV Wonder Pro/Conexant)",
- .count = 3,
- .ranges = {
- { 16 * 160.00 /*MHz*/, 0x01, },
- { 16 * 442.00 /*MHz*/, 0x02, },
- { 16 * 999.99 , 0x04, },
- },
- .config = 0x8e,
- },
- [TUNER_MICROTUNE_4049FM5] = { /* Microtune PAL */
- .name = "Microtune 4049 FM5",
- .count = 3,
- .ranges = {
- { 16 * 141.00 /*MHz*/, 0xa0, },
- { 16 * 464.00 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
- [TUNER_PANASONIC_VP27] = { /* Panasonic NTSC */
- .name = "Panasonic VP27s/ENGE4324D",
- .count = 3,
- .ranges = {
- { 16 * 160.00 /*MHz*/, 0x01, },
- { 16 * 454.00 /*MHz*/, 0x02, },
- { 16 * 999.99 , 0x08, },
- },
- .config = 0xce,
- },
- [TUNER_LG_NTSC_TAPE] = { /* LGINNOTEK NTSC */
- .name = "LG NTSC (TAPE series)",
- .count = 3,
- .ranges = {
- { 16 * 160.00 /*MHz*/, 0x01, },
- { 16 * 442.00 /*MHz*/, 0x02, },
- { 16 * 999.99 , 0x04, },
- },
- .config = 0x8e,
- },
- [TUNER_TNF_8831BGFF] = { /* Philips PAL */
- .name = "Tenna TNF 8831 BGFF)",
- .count = 3,
- .ranges = {
- { 16 * 161.25 /*MHz*/, 0xa0, },
- { 16 * 463.25 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
- [TUNER_MICROTUNE_4042FI5] = { /* Microtune NTSC */
- .name = "Microtune 4042 FI5 ATSC/NTSC dual in",
- .count = 3,
- .ranges = {
- { 16 * 162.00 /*MHz*/, 0xa2, },
- { 16 * 457.00 /*MHz*/, 0x94, },
- { 16 * 999.99 , 0x31, },
- },
- .config = 0x8e,
- },
-
- /* 50-59 */
- [TUNER_TCL_2002N] = { /* TCL NTSC */
- .name = "TCL 2002N",
- .count = 3,
- .ranges = {
- { 16 * 172.00 /*MHz*/, 0x01, },
- { 16 * 448.00 /*MHz*/, 0x02, },
- { 16 * 999.99 , 0x08, },
- },
- .config = 0x8e,
- },
- [TUNER_PHILIPS_FM1256_IH3] = { /* Philips PAL */
- .name = "Philips PAL/SECAM_D (FM 1256 I-H3)",
- .count = 3,
- .ranges = {
- { 16 * 160.00 /*MHz*/, 0x01, },
- { 16 * 442.00 /*MHz*/, 0x02, },
- { 16 * 999.99 , 0x04, },
- },
- .config = 0x8e,
- },
- [TUNER_THOMSON_DTT7610] = { /* THOMSON ATSC */
- .name = "Thomson DTT 7610 (ATSC/NTSC)",
- .count = 3,
- .ranges = {
- { 16 * 157.25 /*MHz*/, 0x39, },
- { 16 * 454.00 /*MHz*/, 0x3a, },
- { 16 * 999.99 , 0x3c, },
- },
- .config = 0x8e,
- },
- [TUNER_PHILIPS_FQ1286] = { /* Philips NTSC */
- .name = "Philips FQ1286",
- .count = 3,
- .ranges = {
- { 16 * 160.00 /*MHz*/, 0x41, },
- { 16 * 454.00 /*MHz*/, 0x42, },
- { 16 * 999.99 , 0x04, },
- },
- .config = 0x8e,
- },
- [TUNER_PHILIPS_TDA8290] = { /* Philips PAL|NTSC */
- .name = "tda8290+75",
- /* see tda8290.c for details */ },
- [TUNER_TCL_2002MB] = { /* TCL PAL */
- .name = "TCL 2002MB",
- .count = 3,
- .ranges = {
- { 16 * 170.00 /*MHz*/, 0x01, },
- { 16 * 450.00 /*MHz*/, 0x02, },
- { 16 * 999.99 , 0x08, },
- },
- .config = 0xce,
- },
- [TUNER_PHILIPS_FQ1216AME_MK4] = { /* Philips PAL */
- .name = "Philips PAL/SECAM multi (FQ1216AME MK4)",
- .count = 3,
- .ranges = {
- { 16 * 160.00 /*MHz*/, 0x01, },
- { 16 * 442.00 /*MHz*/, 0x02, },
- { 16 * 999.99 , 0x04, },
- },
- .config = 0xce,
- },
- [TUNER_PHILIPS_FQ1236A_MK4] = { /* Philips NTSC */
- .name = "Philips FQ1236A MK4",
- .count = 3,
- .ranges = {
- { 16 * 160.00 /*MHz*/, 0x01, },
- { 16 * 442.00 /*MHz*/, 0x02, },
- { 16 * 999.99 , 0x04, },
- },
- .config = 0x8e,
- },
- [TUNER_YMEC_TVF_8531MF] = { /* Philips NTSC */
- .name = "Ymec TVision TVF-8531MF/8831MF/8731MF",
- .count = 3,
- .ranges = {
- { 16 * 160.00 /*MHz*/, 0xa0, },
- { 16 * 454.00 /*MHz*/, 0x90, },
- { 16 * 999.99 , 0x30, },
- },
- .config = 0x8e,
- },
- [TUNER_YMEC_TVF_5533MF] = { /* Philips NTSC */
- .name = "Ymec TVision TVF-5533MF",
- .count = 3,
- .ranges = {
- { 16 * 160.00 /*MHz*/, 0x01, },
- { 16 * 454.00 /*MHz*/, 0x02, },
- { 16 * 999.99 , 0x04, },
- },
- .config = 0x8e,
- },
-
- /* 60-69 */
- [TUNER_THOMSON_DTT761X] = { /* THOMSON ATSC */
- /* DTT 7611 7611A 7612 7613 7613A 7614 7615 7615A */
- .name = "Thomson DTT 761X (ATSC/NTSC)",
- .count = 3,
- .ranges = {
- { 16 * 145.25 /*MHz*/, 0x39, },
- { 16 * 415.25 /*MHz*/, 0x3a, },
- { 16 * 999.99 , 0x3c, },
- },
- .config = 0x8e,
- },
- [TUNER_TENA_9533_DI] = { /* Philips PAL */
- .name = "Tena TNF9533-D/IF/TNF9533-B/DF",
- .count = 3,
- .ranges = {
- { 16 * 160.25 /*MHz*/, 0x01, },
- { 16 * 464.25 /*MHz*/, 0x02, },
- { 16 * 999.99 , 0x04, },
- },
- .config = 0x8e,
- },
- [TUNER_TEA5767] = { /* Philips RADIO */
- .name = "Philips TEA5767HN FM Radio",
- /* see tea5767.c for details */},
- [TUNER_PHILIPS_FMD1216ME_MK3] = { /* Philips PAL */
- .name = "Philips FMD1216ME MK3 Hybrid Tuner",
- .count = 3,
- .ranges = {
- { 16 * 160.00 /*MHz*/, 0x51, },
- { 16 * 442.00 /*MHz*/, 0x52, },
- { 16 * 999.99 , 0x54, },
- },
- .config = 0x86,
- },
- [TUNER_LG_TDVS_H062F] = { /* LGINNOTEK ATSC */
- .name = "LG TDVS-H062F/TUA6034",
- .count = 3,
- .ranges = {
- { 16 * 160.00 /*MHz*/, 0x01 },
- { 16 * 455.00 /*MHz*/, 0x02 },
- { 16 * 999.99 , 0x04 },
- },
- .config = 0x8e,
- },
- [TUNER_YMEC_TVF66T5_B_DFF] = { /* Philips PAL */
- .name = "Ymec TVF66T5-B/DFF",
- .count = 3,
- .ranges = {
- { 16 * 160.25 /*MHz*/, 0x01, },
- { 16 * 464.25 /*MHz*/, 0x02, },
- { 16 * 999.99 , 0x08, },
- },
- .config = 0x8e,
- },
- [TUNER_LG_NTSC_TALN_MINI] = { /* LGINNOTEK NTSC */
- .name = "LG NTSC (TALN mini series)",
- .count = 3,
- .ranges = {
- { 16 * 137.25 /*MHz*/, 0x01, },
- { 16 * 373.25 /*MHz*/, 0x02, },
- { 16 * 999.99 , 0x08, },
- },
- .config = 0x8e,
- },
- [TUNER_PHILIPS_TD1316] = { /* Philips PAL */
- .name = "Philips TD1316 Hybrid Tuner",
- .count = 3,
- .ranges = {
- { 16 * 160.00 /*MHz*/, 0xa1, },
- { 16 * 442.00 /*MHz*/, 0xa2, },
- { 16 * 999.99 , 0xa4, },
- },
- .config = 0xc8,
- },
- [TUNER_PHILIPS_TUV1236D] = { /* Philips ATSC */
- .name = "Philips TUV1236D ATSC/NTSC dual in",
- .count = 3,
- .ranges = {
- { 16 * 157.25 /*MHz*/, 0x01, },
- { 16 * 454.00 /*MHz*/, 0x02, },
- { 16 * 999.99 , 0x04, },
- },
- .config = 0xce,
- },
- [TUNER_TNF_5335MF] = { /* Philips NTSC */
- .name = "Tena TNF 5335 MF",
- .count = 3,
- .ranges = {
- { 16 * 157.25 /*MHz*/, 0x01, },
- { 16 * 454.00 /*MHz*/, 0x02, },
- { 16 * 999.99 , 0x04, },
- },
- .config = 0x8e,
- },
-};
-
-unsigned const int tuner_count = ARRAY_SIZE(tuners);
/* ---------------------------------------------------------------------- */
@@ -842,16 +136,23 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq)
u8 config, tuneraddr;
u16 div;
struct tunertype *tun;
- unsigned char buffer[4];
- int rc, IFPCoff, i;
+ u8 buffer[4];
+ int rc, IFPCoff, i, j;
tun = &tuners[t->type];
- for (i = 0; i < tun->count; i++) {
- if (freq > tun->ranges[i].thresh)
+ j = TUNER_PARAM_ANALOG;
+
+ for (i = 0; i < tun->params[j].count; i++) {
+ if (freq > tun->params[j].ranges[i].limit)
continue;
break;
}
- config = tun->ranges[i].cb;
+ if (i == tun->params[j].count) {
+ tuner_dbg("TV frequency out of range (%d > %d)",
+ freq, tun->params[j].ranges[i - 1].limit);
+ freq = tun->params[j].ranges[--i].limit;
+ }
+ config = tun->params[j].ranges[i].cb;
/* i == 0 -> VHF_LO */
/* i == 1 -> VHF_HI */
/* i == 2 -> UHF */
@@ -914,7 +215,7 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq)
case TUNER_MICROTUNE_4042FI5:
/* Set the charge pump for fast tuning */
- tun->config |= TUNER_CHARGE_PUMP;
+ tun->params[j].config |= TUNER_CHARGE_PUMP;
break;
case TUNER_PHILIPS_TUV1236D:
@@ -943,20 +244,6 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq)
break;
}
- /*
- * Philips FI1216MK2 remark from specification :
- * for channel selection involving band switching, and to ensure
- * smooth tuning to the desired channel without causing
- * unnecessary charge pump action, it is recommended to consider
- * the difference between wanted channel frequency and the
- * current channel frequency. Unnecessary charge pump action
- * will result in very low tuning voltage which may drive the
- * oscillator to extreme conditions.
- *
- * Progfou: specification says to send config data before
- * frequency in case (wanted frequency < current frequency).
- */
-
/* IFPCoff = Video Intermediate Frequency - Vif:
940 =16*58.75 NTSC/J (Japan)
732 =16*45.75 M/N STD
@@ -988,17 +275,18 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq)
offset / 16, offset % 16 * 100 / 16,
div);
- if (t->type == TUNER_PHILIPS_SECAM && freq < t->freq) {
- buffer[0] = tun->config;
+ if (tuners[t->type].params->cb_first_if_lower_freq && div < t->last_div) {
+ buffer[0] = tun->params[j].config;
buffer[1] = config;
buffer[2] = (div>>8) & 0x7f;
buffer[3] = div & 0xff;
} else {
buffer[0] = (div>>8) & 0x7f;
buffer[1] = div & 0xff;
- buffer[2] = tun->config;
+ buffer[2] = tun->params[j].config;
buffer[3] = config;
}
+ t->last_div = div;
tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n",
buffer[0],buffer[1],buffer[2],buffer[3]);
@@ -1024,10 +312,10 @@ static void default_set_tv_freq(struct i2c_client *c, unsigned int freq)
}
/* Set the charge pump for optimized phase noise figure */
- tun->config &= ~TUNER_CHARGE_PUMP;
+ tun->params[j].config &= ~TUNER_CHARGE_PUMP;
buffer[0] = (div>>8) & 0x7f;
buffer[1] = div & 0xff;
- buffer[2] = tun->config;
+ buffer[2] = tun->params[j].config;
buffer[3] = config;
tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n",
buffer[0],buffer[1],buffer[2],buffer[3]);
@@ -1041,13 +329,15 @@ static void default_set_radio_freq(struct i2c_client *c, unsigned int freq)
{
struct tunertype *tun;
struct tuner *t = i2c_get_clientdata(c);
- unsigned char buffer[4];
- unsigned div;
- int rc;
+ u8 buffer[4];
+ u16 div;
+ int rc, j;
tun = &tuners[t->type];
+ j = TUNER_PARAM_ANALOG;
+
div = (20 * freq / 16000) + (int)(20*10.7); /* IF 10.7 MHz */
- buffer[2] = (tun->config & ~TUNER_RATIO_MASK) | TUNER_RATIO_SELECT_50; /* 50 kHz step */
+ buffer[2] = (tun->params[j].config & ~TUNER_RATIO_MASK) | TUNER_RATIO_SELECT_50; /* 50 kHz step */
switch (t->type) {
case TUNER_TENA_9533_DI:
@@ -1076,9 +366,19 @@ static void default_set_radio_freq(struct i2c_client *c, unsigned int freq)
}
buffer[0] = (div>>8) & 0x7f;
buffer[1] = div & 0xff;
+ if (tuners[t->type].params->cb_first_if_lower_freq && div < t->last_div) {
+ buffer[0] = buffer[2];
+ buffer[1] = buffer[3];
+ buffer[2] = (div>>8) & 0x7f;
+ buffer[3] = div & 0xff;
+ } else {
+ buffer[0] = (div>>8) & 0x7f;
+ buffer[1] = div & 0xff;
+ }
tuner_dbg("radio 0x%02x 0x%02x 0x%02x 0x%02x\n",
buffer[0],buffer[1],buffer[2],buffer[3]);
+ t->last_div = div;
if (4 != (rc = i2c_master_send(c,buffer,4)))
tuner_warn("i2c i/o error: rc == %d (should be 4)\n",rc);
@@ -1092,10 +392,10 @@ int default_tuner_init(struct i2c_client *c)
t->type, tuners[t->type].name);
strlcpy(c->name, tuners[t->type].name, sizeof(c->name));
- t->tv_freq = default_set_tv_freq;
- t->radio_freq = default_set_radio_freq;
+ t->set_tv_freq = default_set_tv_freq;
+ t->set_radio_freq = default_set_radio_freq;
t->has_signal = tuner_signal;
- t->is_stereo = tuner_stereo;
+ t->is_stereo = tuner_stereo;
t->standby = NULL;
return 0;
diff --git a/drivers/media/video/tuner-types.c b/drivers/media/video/tuner-types.c
new file mode 100644
index 000000000000..6fe781798d89
--- /dev/null
+++ b/drivers/media/video/tuner-types.c
@@ -0,0 +1,1406 @@
+/*
+ *
+ * i2c tv tuner chip device type database.
+ *
+ */
+
+#include <linux/i2c.h>
+#include <media/tuner.h>
+#include <media/tuner-types.h>
+
+/* ---------------------------------------------------------------------- */
+
+/*
+ * The floats in the tuner struct are computed at compile time
+ * by gcc and cast back to integers. Thus we don't violate the
+ * "no float in kernel" rule.
+ *
+ * A tuner_range may be referenced by multiple tuner_params structs.
+ * There are many duplicates in here. Reusing tuner_range structs,
+ * rather than defining new ones for each tuner, will cut down on
+ * memory usage, and is preferred when possible.
+ *
+ * Each tuner_params array may contain one or more elements, one
+ * for each video standard.
+ *
+ * FIXME: Some tuner_range definitions are duplicated, and
+ * should be eliminated.
+ *
+ * FIXME: tunertype struct contains an element, has_tda988x.
+ * We must set this for all tunertypes that contain a tda988x
+ * chip, and then we can remove this setting from the various
+ * card structs.
+ */
+
+/* 0-9 */
+/* ------------ TUNER_TEMIC_PAL - TEMIC PAL ------------ */
+
+static struct tuner_range tuner_temic_pal_ranges[] = {
+ { 16 * 140.25 /*MHz*/, 0x02, },
+ { 16 * 463.25 /*MHz*/, 0x04, },
+ { 16 * 999.99 , 0x01, },
+};
+
+static struct tuner_params tuner_temic_pal_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_temic_pal_ranges,
+ .count = ARRAY_SIZE(tuner_temic_pal_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_PHILIPS_PAL_I - Philips PAL_I ------------ */
+
+static struct tuner_range tuner_philips_pal_i_ranges[] = {
+ { 16 * 140.25 /*MHz*/, 0xa0, },
+ { 16 * 463.25 /*MHz*/, 0x90, },
+ { 16 * 999.99 , 0x30, },
+};
+
+static struct tuner_params tuner_philips_pal_i_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_philips_pal_i_ranges,
+ .count = ARRAY_SIZE(tuner_philips_pal_i_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_PHILIPS_NTSC - Philips NTSC ------------ */
+
+static struct tuner_range tuner_philips_ntsc_ranges[] = {
+ { 16 * 157.25 /*MHz*/, 0xa0, },
+ { 16 * 451.25 /*MHz*/, 0x90, },
+ { 16 * 999.99 , 0x30, },
+};
+
+static struct tuner_params tuner_philips_ntsc_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_philips_ntsc_ranges,
+ .count = ARRAY_SIZE(tuner_philips_ntsc_ranges),
+ .config = 0x8e,
+ .cb_first_if_lower_freq = 1,
+ },
+};
+
+/* ------------ TUNER_PHILIPS_SECAM - Philips SECAM ------------ */
+
+static struct tuner_range tuner_philips_secam_ranges[] = {
+ { 16 * 168.25 /*MHz*/, 0xa7, },
+ { 16 * 447.25 /*MHz*/, 0x97, },
+ { 16 * 999.99 , 0x37, },
+};
+
+static struct tuner_params tuner_philips_secam_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_SECAM,
+ .ranges = tuner_philips_secam_ranges,
+ .count = ARRAY_SIZE(tuner_philips_secam_ranges),
+ .config = 0x8e,
+ .cb_first_if_lower_freq = 1,
+ },
+};
+
+/* ------------ TUNER_PHILIPS_PAL - Philips PAL ------------ */
+
+static struct tuner_range tuner_philips_pal_ranges[] = {
+ { 16 * 168.25 /*MHz*/, 0xa0, },
+ { 16 * 447.25 /*MHz*/, 0x90, },
+ { 16 * 999.99 , 0x30, },
+};
+
+static struct tuner_params tuner_philips_pal_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_philips_pal_ranges,
+ .count = ARRAY_SIZE(tuner_philips_pal_ranges),
+ .config = 0x8e,
+ .cb_first_if_lower_freq = 1,
+ },
+};
+
+/* ------------ TUNER_TEMIC_NTSC - TEMIC NTSC ------------ */
+
+static struct tuner_range tuner_temic_ntsc_ranges[] = {
+ { 16 * 157.25 /*MHz*/, 0x02, },
+ { 16 * 463.25 /*MHz*/, 0x04, },
+ { 16 * 999.99 , 0x01, },
+};
+
+static struct tuner_params tuner_temic_ntsc_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_temic_ntsc_ranges,
+ .count = ARRAY_SIZE(tuner_temic_ntsc_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_TEMIC_PAL_I - TEMIC PAL_I ------------ */
+
+static struct tuner_range tuner_temic_pal_i_ranges[] = {
+ { 16 * 170.00 /*MHz*/, 0x02, },
+ { 16 * 450.00 /*MHz*/, 0x04, },
+ { 16 * 999.99 , 0x01, },
+};
+
+static struct tuner_params tuner_temic_pal_i_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_temic_pal_i_ranges,
+ .count = ARRAY_SIZE(tuner_temic_pal_i_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_TEMIC_4036FY5_NTSC - TEMIC NTSC ------------ */
+
+static struct tuner_range tuner_temic_4036fy5_ntsc_ranges[] = {
+ { 16 * 157.25 /*MHz*/, 0xa0, },
+ { 16 * 463.25 /*MHz*/, 0x90, },
+ { 16 * 999.99 , 0x30, },
+};
+
+static struct tuner_params tuner_temic_4036fy5_ntsc_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_temic_4036fy5_ntsc_ranges,
+ .count = ARRAY_SIZE(tuner_temic_4036fy5_ntsc_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_ALPS_TSBH1_NTSC - TEMIC NTSC ------------ */
+
+static struct tuner_range tuner_alps_tsb_1_ranges[] = {
+ { 16 * 137.25 /*MHz*/, 0x01, },
+ { 16 * 385.25 /*MHz*/, 0x02, },
+ { 16 * 999.99 , 0x08, },
+};
+
+static struct tuner_params tuner_alps_tsbh1_ntsc_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_alps_tsb_1_ranges,
+ .count = ARRAY_SIZE(tuner_alps_tsb_1_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* 10-19 */
+/* ------------ TUNER_ALPS_TSBE1_PAL - TEMIC PAL ------------ */
+
+static struct tuner_params tuner_alps_tsb_1_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_alps_tsb_1_ranges,
+ .count = ARRAY_SIZE(tuner_alps_tsb_1_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_ALPS_TSBB5_PAL_I - Alps PAL_I ------------ */
+
+static struct tuner_range tuner_alps_tsb_5_pal_ranges[] = {
+ { 16 * 133.25 /*MHz*/, 0x01, },
+ { 16 * 351.25 /*MHz*/, 0x02, },
+ { 16 * 999.99 , 0x08, },
+};
+
+static struct tuner_params tuner_alps_tsbb5_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_alps_tsb_5_pal_ranges,
+ .count = ARRAY_SIZE(tuner_alps_tsb_5_pal_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_ALPS_TSBE5_PAL - Alps PAL ------------ */
+
+static struct tuner_params tuner_alps_tsbe5_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_alps_tsb_5_pal_ranges,
+ .count = ARRAY_SIZE(tuner_alps_tsb_5_pal_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_ALPS_TSBC5_PAL - Alps PAL ------------ */
+
+static struct tuner_params tuner_alps_tsbc5_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_alps_tsb_5_pal_ranges,
+ .count = ARRAY_SIZE(tuner_alps_tsb_5_pal_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_TEMIC_4006FH5_PAL - TEMIC PAL ------------ */
+
+static struct tuner_range tuner_temic_4006fh5_pal_ranges[] = {
+ { 16 * 170.00 /*MHz*/, 0xa0, },
+ { 16 * 450.00 /*MHz*/, 0x90, },
+ { 16 * 999.99 , 0x30, },
+};
+
+static struct tuner_params tuner_temic_4006fh5_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_temic_4006fh5_pal_ranges,
+ .count = ARRAY_SIZE(tuner_temic_4006fh5_pal_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_ALPS_TSHC6_NTSC - Alps NTSC ------------ */
+
+static struct tuner_range tuner_alps_tshc6_ntsc_ranges[] = {
+ { 16 * 137.25 /*MHz*/, 0x14, },
+ { 16 * 385.25 /*MHz*/, 0x12, },
+ { 16 * 999.99 , 0x11, },
+};
+
+static struct tuner_params tuner_alps_tshc6_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_alps_tshc6_ntsc_ranges,
+ .count = ARRAY_SIZE(tuner_alps_tshc6_ntsc_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_TEMIC_PAL_DK - TEMIC PAL ------------ */
+
+static struct tuner_range tuner_temic_pal_dk_ranges[] = {
+ { 16 * 168.25 /*MHz*/, 0xa0, },
+ { 16 * 456.25 /*MHz*/, 0x90, },
+ { 16 * 999.99 , 0x30, },
+};
+
+static struct tuner_params tuner_temic_pal_dk_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_temic_pal_dk_ranges,
+ .count = ARRAY_SIZE(tuner_temic_pal_dk_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_PHILIPS_NTSC_M - Philips NTSC ------------ */
+
+static struct tuner_range tuner_philips_ntsc_m_ranges[] = {
+ { 16 * 160.00 /*MHz*/, 0xa0, },
+ { 16 * 454.00 /*MHz*/, 0x90, },
+ { 16 * 999.99 , 0x30, },
+};
+
+static struct tuner_params tuner_philips_ntsc_m_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_philips_ntsc_m_ranges,
+ .count = ARRAY_SIZE(tuner_philips_ntsc_m_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_TEMIC_4066FY5_PAL_I - TEMIC PAL_I ------------ */
+
+static struct tuner_range tuner_temic_40x6f_5_pal_ranges[] = {
+ { 16 * 169.00 /*MHz*/, 0xa0, },
+ { 16 * 454.00 /*MHz*/, 0x90, },
+ { 16 * 999.99 , 0x30, },
+};
+
+static struct tuner_params tuner_temic_4066fy5_pal_i_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_temic_40x6f_5_pal_ranges,
+ .count = ARRAY_SIZE(tuner_temic_40x6f_5_pal_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_TEMIC_4006FN5_MULTI_PAL - TEMIC PAL ------------ */
+
+static struct tuner_params tuner_temic_4006fn5_multi_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_temic_40x6f_5_pal_ranges,
+ .count = ARRAY_SIZE(tuner_temic_40x6f_5_pal_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* 20-29 */
+/* ------------ TUNER_TEMIC_4009FR5_PAL - TEMIC PAL ------------ */
+
+static struct tuner_range tuner_temic_4009f_5_pal_ranges[] = {
+ { 16 * 141.00 /*MHz*/, 0xa0, },
+ { 16 * 464.00 /*MHz*/, 0x90, },
+ { 16 * 999.99 , 0x30, },
+};
+
+static struct tuner_params tuner_temic_4009f_5_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_temic_4009f_5_pal_ranges,
+ .count = ARRAY_SIZE(tuner_temic_4009f_5_pal_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_TEMIC_4039FR5_NTSC - TEMIC NTSC ------------ */
+
+static struct tuner_range tuner_temic_4039fr5_ntsc_ranges[] = {
+ { 16 * 158.00 /*MHz*/, 0xa0, },
+ { 16 * 453.00 /*MHz*/, 0x90, },
+ { 16 * 999.99 , 0x30, },
+};
+
+static struct tuner_params tuner_temic_4039fr5_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_temic_4039fr5_ntsc_ranges,
+ .count = ARRAY_SIZE(tuner_temic_4039fr5_ntsc_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_TEMIC_4046FM5 - TEMIC PAL ------------ */
+
+static struct tuner_range tuner_temic_4046fm5_pal_ranges[] = {
+ { 16 * 169.00 /*MHz*/, 0xa0, },
+ { 16 * 454.00 /*MHz*/, 0x90, },
+ { 16 * 999.99 , 0x30, },
+};
+
+static struct tuner_params tuner_temic_4046fm5_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_temic_4046fm5_pal_ranges,
+ .count = ARRAY_SIZE(tuner_temic_4046fm5_pal_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_PHILIPS_PAL_DK - Philips PAL ------------ */
+
+static struct tuner_range tuner_lg_pal_ranges[] = {
+ { 16 * 170.00 /*MHz*/, 0xa0, },
+ { 16 * 450.00 /*MHz*/, 0x90, },
+ { 16 * 999.99 , 0x30, },
+};
+
+static struct tuner_params tuner_philips_pal_dk_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_lg_pal_ranges,
+ .count = ARRAY_SIZE(tuner_lg_pal_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_PHILIPS_FQ1216ME - Philips PAL ------------ */
+
+static struct tuner_params tuner_philips_fq1216me_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_lg_pal_ranges,
+ .count = ARRAY_SIZE(tuner_lg_pal_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_LG_PAL_I_FM - LGINNOTEK PAL_I ------------ */
+
+static struct tuner_params tuner_lg_pal_i_fm_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_lg_pal_ranges,
+ .count = ARRAY_SIZE(tuner_lg_pal_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_LG_PAL_I - LGINNOTEK PAL_I ------------ */
+
+static struct tuner_params tuner_lg_pal_i_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_lg_pal_ranges,
+ .count = ARRAY_SIZE(tuner_lg_pal_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_LG_NTSC_FM - LGINNOTEK NTSC ------------ */
+
+static struct tuner_range tuner_lg_ntsc_fm_ranges[] = {
+ { 16 * 210.00 /*MHz*/, 0xa0, },
+ { 16 * 497.00 /*MHz*/, 0x90, },
+ { 16 * 999.99 , 0x30, },
+};
+
+static struct tuner_params tuner_lg_ntsc_fm_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_lg_ntsc_fm_ranges,
+ .count = ARRAY_SIZE(tuner_lg_ntsc_fm_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_LG_PAL_FM - LGINNOTEK PAL ------------ */
+
+static struct tuner_params tuner_lg_pal_fm_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_lg_pal_ranges,
+ .count = ARRAY_SIZE(tuner_lg_pal_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_LG_PAL - LGINNOTEK PAL ------------ */
+
+static struct tuner_params tuner_lg_pal_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_lg_pal_ranges,
+ .count = ARRAY_SIZE(tuner_lg_pal_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* 30-39 */
+/* ------------ TUNER_TEMIC_4009FN5_MULTI_PAL_FM - TEMIC PAL ------------ */
+
+static struct tuner_params tuner_temic_4009_fn5_multi_pal_fm_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_temic_4009f_5_pal_ranges,
+ .count = ARRAY_SIZE(tuner_temic_4009f_5_pal_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_SHARP_2U5JF5540_NTSC - SHARP NTSC ------------ */
+
+static struct tuner_range tuner_sharp_2u5jf5540_ntsc_ranges[] = {
+ { 16 * 137.25 /*MHz*/, 0x01, },
+ { 16 * 317.25 /*MHz*/, 0x02, },
+ { 16 * 999.99 , 0x08, },
+};
+
+static struct tuner_params tuner_sharp_2u5jf5540_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_sharp_2u5jf5540_ntsc_ranges,
+ .count = ARRAY_SIZE(tuner_sharp_2u5jf5540_ntsc_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_Samsung_PAL_TCPM9091PD27 - Samsung PAL ------------ */
+
+static struct tuner_range tuner_samsung_pal_tcpm9091pd27_ranges[] = {
+ { 16 * 169 /*MHz*/, 0xa0, },
+ { 16 * 464 /*MHz*/, 0x90, },
+ { 16 * 999.99 , 0x30, },
+};
+
+static struct tuner_params tuner_samsung_pal_tcpm9091pd27_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_samsung_pal_tcpm9091pd27_ranges,
+ .count = ARRAY_SIZE(tuner_samsung_pal_tcpm9091pd27_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_TEMIC_4106FH5 - TEMIC PAL ------------ */
+
+static struct tuner_params tuner_temic_4106fh5_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_temic_4009f_5_pal_ranges,
+ .count = ARRAY_SIZE(tuner_temic_4009f_5_pal_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_TEMIC_4012FY5 - TEMIC PAL ------------ */
+
+static struct tuner_range tuner_temic_4012fy5_pal_ranges[] = {
+ { 16 * 140.25 /*MHz*/, 0x02, },
+ { 16 * 463.25 /*MHz*/, 0x04, },
+ { 16 * 999.99 , 0x01, },
+};
+
+static struct tuner_params tuner_temic_4012fy5_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_temic_4012fy5_pal_ranges,
+ .count = ARRAY_SIZE(tuner_temic_4012fy5_pal_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_TEMIC_4136FY5 - TEMIC NTSC ------------ */
+
+static struct tuner_range tuner_temic_4136_fy5_ntsc_ranges[] = {
+ { 16 * 158.00 /*MHz*/, 0xa0, },
+ { 16 * 453.00 /*MHz*/, 0x90, },
+ { 16 * 999.99 , 0x30, },
+};
+
+static struct tuner_params tuner_temic_4136_fy5_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_temic_4136_fy5_ntsc_ranges,
+ .count = ARRAY_SIZE(tuner_temic_4136_fy5_ntsc_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_LG_PAL_NEW_TAPC - LGINNOTEK PAL ------------ */
+
+static struct tuner_range tuner_lg_new_tapc_ranges[] = {
+ { 16 * 170.00 /*MHz*/, 0x01, },
+ { 16 * 450.00 /*MHz*/, 0x02, },
+ { 16 * 999.99 , 0x08, },
+};
+
+static struct tuner_params tuner_lg_pal_new_tapc_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_lg_new_tapc_ranges,
+ .count = ARRAY_SIZE(tuner_lg_new_tapc_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_PHILIPS_FM1216ME_MK3 - Philips PAL ------------ */
+
+static struct tuner_range tuner_fm1216me_mk3_pal_ranges[] = {
+ { 16 * 158.00 /*MHz*/, 0x01, },
+ { 16 * 442.00 /*MHz*/, 0x02, },
+ { 16 * 999.99 , 0x04, },
+};
+
+static struct tuner_params tuner_fm1216me_mk3_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_fm1216me_mk3_pal_ranges,
+ .count = ARRAY_SIZE(tuner_fm1216me_mk3_pal_ranges),
+ .config = 0x8e,
+ .cb_first_if_lower_freq = 1,
+ },
+};
+
+/* ------------ TUNER_LG_NTSC_NEW_TAPC - LGINNOTEK NTSC ------------ */
+
+static struct tuner_params tuner_lg_ntsc_new_tapc_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_lg_new_tapc_ranges,
+ .count = ARRAY_SIZE(tuner_lg_new_tapc_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* 40-49 */
+/* ------------ TUNER_HITACHI_NTSC - HITACHI NTSC ------------ */
+
+static struct tuner_params tuner_hitachi_ntsc_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_lg_new_tapc_ranges,
+ .count = ARRAY_SIZE(tuner_lg_new_tapc_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_PHILIPS_PAL_MK - Philips PAL ------------ */
+
+static struct tuner_range tuner_philips_pal_mk_pal_ranges[] = {
+ { 16 * 140.25 /*MHz*/, 0x01, },
+ { 16 * 463.25 /*MHz*/, 0xc2, },
+ { 16 * 999.99 , 0xcf, },
+};
+
+static struct tuner_params tuner_philips_pal_mk_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_philips_pal_mk_pal_ranges,
+ .count = ARRAY_SIZE(tuner_philips_pal_mk_pal_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_PHILIPS_ATSC - Philips ATSC ------------ */
+
+static struct tuner_range tuner_philips_atsc_ranges[] = {
+ { 16 * 157.25 /*MHz*/, 0xa0, },
+ { 16 * 454.00 /*MHz*/, 0x90, },
+ { 16 * 999.99 , 0x30, },
+};
+
+static struct tuner_params tuner_philips_atsc_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_philips_atsc_ranges,
+ .count = ARRAY_SIZE(tuner_philips_atsc_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_PHILIPS_FM1236_MK3 - Philips NTSC ------------ */
+
+static struct tuner_range tuner_fm1236_mk3_ntsc_ranges[] = {
+ { 16 * 160.00 /*MHz*/, 0x01, },
+ { 16 * 442.00 /*MHz*/, 0x02, },
+ { 16 * 999.99 , 0x04, },
+};
+
+static struct tuner_params tuner_fm1236_mk3_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_fm1236_mk3_ntsc_ranges,
+ .count = ARRAY_SIZE(tuner_fm1236_mk3_ntsc_ranges),
+ .config = 0x8e,
+ .cb_first_if_lower_freq = 1,
+ },
+};
+
+/* ------------ TUNER_PHILIPS_4IN1 - Philips NTSC ------------ */
+
+static struct tuner_range tuner_philips_4in1_ntsc_ranges[] = {
+ { 16 * 160.00 /*MHz*/, 0x01, },
+ { 16 * 442.00 /*MHz*/, 0x02, },
+ { 16 * 999.99 , 0x04, },
+};
+
+static struct tuner_params tuner_philips_4in1_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_philips_4in1_ntsc_ranges,
+ .count = ARRAY_SIZE(tuner_philips_4in1_ntsc_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_MICROTUNE_4049FM5 - Microtune PAL ------------ */
+
+static struct tuner_params tuner_microtune_4049_fm5_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_temic_4009f_5_pal_ranges,
+ .count = ARRAY_SIZE(tuner_temic_4009f_5_pal_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_PANASONIC_VP27 - Panasonic NTSC ------------ */
+
+static struct tuner_range tuner_panasonic_vp27_ntsc_ranges[] = {
+ { 16 * 160.00 /*MHz*/, 0x01, },
+ { 16 * 454.00 /*MHz*/, 0x02, },
+ { 16 * 999.99 , 0x08, },
+};
+
+static struct tuner_params tuner_panasonic_vp27_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_panasonic_vp27_ntsc_ranges,
+ .count = ARRAY_SIZE(tuner_panasonic_vp27_ntsc_ranges),
+ .config = 0xce,
+ },
+};
+
+/* ------------ TUNER_LG_NTSC_TAPE - LGINNOTEK NTSC ------------ */
+
+static struct tuner_range tuner_lg_ntsc_tape_ranges[] = {
+ { 16 * 160.00 /*MHz*/, 0x01, },
+ { 16 * 442.00 /*MHz*/, 0x02, },
+ { 16 * 999.99 , 0x04, },
+};
+
+static struct tuner_params tuner_lg_ntsc_tape_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_lg_ntsc_tape_ranges,
+ .count = ARRAY_SIZE(tuner_lg_ntsc_tape_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_TNF_8831BGFF - Philips PAL ------------ */
+
+static struct tuner_range tuner_tnf_8831bgff_pal_ranges[] = {
+ { 16 * 161.25 /*MHz*/, 0xa0, },
+ { 16 * 463.25 /*MHz*/, 0x90, },
+ { 16 * 999.99 , 0x30, },
+};
+
+static struct tuner_params tuner_tnf_8831bgff_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_tnf_8831bgff_pal_ranges,
+ .count = ARRAY_SIZE(tuner_tnf_8831bgff_pal_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_MICROTUNE_4042FI5 - Microtune NTSC ------------ */
+
+static struct tuner_range tuner_microtune_4042fi5_ntsc_ranges[] = {
+ { 16 * 162.00 /*MHz*/, 0xa2, },
+ { 16 * 457.00 /*MHz*/, 0x94, },
+ { 16 * 999.99 , 0x31, },
+};
+
+static struct tuner_params tuner_microtune_4042fi5_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_microtune_4042fi5_ntsc_ranges,
+ .count = ARRAY_SIZE(tuner_microtune_4042fi5_ntsc_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* 50-59 */
+/* ------------ TUNER_TCL_2002N - TCL NTSC ------------ */
+
+static struct tuner_range tuner_tcl_2002n_ntsc_ranges[] = {
+ { 16 * 172.00 /*MHz*/, 0x01, },
+ { 16 * 448.00 /*MHz*/, 0x02, },
+ { 16 * 999.99 , 0x08, },
+};
+
+static struct tuner_params tuner_tcl_2002n_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_tcl_2002n_ntsc_ranges,
+ .count = ARRAY_SIZE(tuner_tcl_2002n_ntsc_ranges),
+ .config = 0x8e,
+ .cb_first_if_lower_freq = 1,
+ },
+};
+
+/* ------------ TUNER_PHILIPS_FM1256_IH3 - Philips PAL ------------ */
+
+static struct tuner_range tuner_philips_fm1256_ih3_pal_ranges[] = {
+ { 16 * 160.00 /*MHz*/, 0x01, },
+ { 16 * 442.00 /*MHz*/, 0x02, },
+ { 16 * 999.99 , 0x04, },
+};
+
+static struct tuner_params tuner_philips_fm1256_ih3_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_philips_fm1256_ih3_pal_ranges,
+ .count = ARRAY_SIZE(tuner_philips_fm1256_ih3_pal_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_THOMSON_DTT7610 - THOMSON ATSC ------------ */
+
+static struct tuner_range tuner_thomson_dtt7610_ntsc_ranges[] = {
+ { 16 * 157.25 /*MHz*/, 0x39, },
+ { 16 * 454.00 /*MHz*/, 0x3a, },
+ { 16 * 999.99 , 0x3c, },
+};
+
+static struct tuner_params tuner_thomson_dtt7610_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_thomson_dtt7610_ntsc_ranges,
+ .count = ARRAY_SIZE(tuner_thomson_dtt7610_ntsc_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_PHILIPS_FQ1286 - Philips NTSC ------------ */
+
+static struct tuner_range tuner_philips_fq1286_ntsc_ranges[] = {
+ { 16 * 160.00 /*MHz*/, 0x41, },
+ { 16 * 454.00 /*MHz*/, 0x42, },
+ { 16 * 999.99 , 0x04, },
+};
+
+static struct tuner_params tuner_philips_fq1286_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_philips_fq1286_ntsc_ranges,
+ .count = ARRAY_SIZE(tuner_philips_fq1286_ntsc_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_TCL_2002MB - TCL PAL ------------ */
+
+static struct tuner_range tuner_tcl_2002mb_pal_ranges[] = {
+ { 16 * 170.00 /*MHz*/, 0x01, },
+ { 16 * 450.00 /*MHz*/, 0x02, },
+ { 16 * 999.99 , 0x08, },
+};
+
+static struct tuner_params tuner_tcl_2002mb_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_tcl_2002mb_pal_ranges,
+ .count = ARRAY_SIZE(tuner_tcl_2002mb_pal_ranges),
+ .config = 0xce,
+ },
+};
+
+/* ------------ TUNER_PHILIPS_FQ1216AME_MK4 - Philips PAL ------------ */
+
+static struct tuner_range tuner_philips_fq12_6a___mk4_ranges[] = {
+ { 16 * 160.00 /*MHz*/, 0x01, },
+ { 16 * 442.00 /*MHz*/, 0x02, },
+ { 16 * 999.99 , 0x04, },
+};
+
+static struct tuner_params tuner_philips_fq1216ame_mk4_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_philips_fq12_6a___mk4_ranges,
+ .count = ARRAY_SIZE(tuner_philips_fq12_6a___mk4_ranges),
+ .config = 0xce,
+ },
+};
+
+/* ------------ TUNER_PHILIPS_FQ1236A_MK4 - Philips NTSC ------------ */
+
+static struct tuner_params tuner_philips_fq1236a_mk4_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_philips_fq12_6a___mk4_ranges,
+ .count = ARRAY_SIZE(tuner_philips_fq12_6a___mk4_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_YMEC_TVF_8531MF - Philips NTSC ------------ */
+
+static struct tuner_range tuner_ymec_tvf_8531mf_ntsc_ranges[] = {
+ { 16 * 160.00 /*MHz*/, 0xa0, },
+ { 16 * 454.00 /*MHz*/, 0x90, },
+ { 16 * 999.99 , 0x30, },
+};
+
+static struct tuner_params tuner_ymec_tvf_8531mf_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_ymec_tvf_8531mf_ntsc_ranges,
+ .count = ARRAY_SIZE(tuner_ymec_tvf_8531mf_ntsc_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_YMEC_TVF_5533MF - Philips NTSC ------------ */
+
+static struct tuner_range tuner_ymec_tvf_5533mf_ntsc_ranges[] = {
+ { 16 * 160.00 /*MHz*/, 0x01, },
+ { 16 * 454.00 /*MHz*/, 0x02, },
+ { 16 * 999.99 , 0x04, },
+};
+
+static struct tuner_params tuner_ymec_tvf_5533mf_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_ymec_tvf_5533mf_ntsc_ranges,
+ .count = ARRAY_SIZE(tuner_ymec_tvf_5533mf_ntsc_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* 60-69 */
+/* ------------ TUNER_THOMSON_DTT761X - THOMSON ATSC ------------ */
+/* DTT 7611 7611A 7612 7613 7613A 7614 7615 7615A */
+
+static struct tuner_range tuner_thomson_dtt761x_ntsc_ranges[] = {
+ { 16 * 145.25 /*MHz*/, 0x39, },
+ { 16 * 415.25 /*MHz*/, 0x3a, },
+ { 16 * 999.99 , 0x3c, },
+};
+
+
+static struct tuner_params tuner_thomson_dtt761x_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_thomson_dtt761x_ntsc_ranges,
+ .count = ARRAY_SIZE(tuner_thomson_dtt761x_ntsc_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_TENA_9533_DI - Philips PAL ------------ */
+
+static struct tuner_range tuner_tuner_tena_9533_di_pal_ranges[] = {
+ { 16 * 160.25 /*MHz*/, 0x01, },
+ { 16 * 464.25 /*MHz*/, 0x02, },
+ { 16 * 999.99 , 0x04, },
+};
+
+static struct tuner_params tuner_tena_9533_di_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_tuner_tena_9533_di_pal_ranges,
+ .count = ARRAY_SIZE(tuner_tuner_tena_9533_di_pal_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_PHILIPS_FMD1216ME_MK3 - Philips PAL ------------ */
+
+static struct tuner_range tuner_philips_fmd1216me_mk3_pal_ranges[] = {
+ { 16 * 160.00 /*MHz*/, 0x51, },
+ { 16 * 442.00 /*MHz*/, 0x52, },
+ { 16 * 999.99 , 0x54, },
+};
+
+
+static struct tuner_params tuner_tuner_philips_fmd1216me_mk3_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_philips_fmd1216me_mk3_pal_ranges,
+ .count = ARRAY_SIZE(tuner_philips_fmd1216me_mk3_pal_ranges),
+ .config = 0x86,
+ },
+};
+
+
+/* ------------ TUNER_LG_TDVS_H062F - INFINEON ATSC ------------ */
+
+static struct tuner_range tuner_tua6034_ntsc_ranges[] = {
+ { 16 * 160.00 /*MHz*/, 0x01 },
+ { 16 * 455.00 /*MHz*/, 0x02 },
+ { 16 * 999.99 , 0x04 },
+};
+
+
+static struct tuner_params tuner_tua6034_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_tua6034_ntsc_ranges,
+ .count = ARRAY_SIZE(tuner_tua6034_ntsc_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_YMEC_TVF66T5_B_DFF - Philips PAL ------------ */
+
+static struct tuner_range tuner_ymec_tvf66t5_b_dff_pal_ranges[] = {
+ { 16 * 160.25 /*MHz*/, 0x01, },
+ { 16 * 464.25 /*MHz*/, 0x02, },
+ { 16 * 999.99 , 0x08, },
+};
+
+static struct tuner_params tuner_ymec_tvf66t5_b_dff_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_ymec_tvf66t5_b_dff_pal_ranges,
+ .count = ARRAY_SIZE(tuner_ymec_tvf66t5_b_dff_pal_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_LG_NTSC_TALN_MINI - LGINNOTEK NTSC ------------ */
+
+static struct tuner_range tuner_lg_taln_mini_ntsc_ranges[] = {
+ { 16 * 137.25 /*MHz*/, 0x01, },
+ { 16 * 373.25 /*MHz*/, 0x02, },
+ { 16 * 999.99 , 0x08, },
+};
+
+static struct tuner_params tuner_lg_taln_mini_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_lg_taln_mini_ntsc_ranges,
+ .count = ARRAY_SIZE(tuner_lg_taln_mini_ntsc_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* ------------ TUNER_PHILIPS_TD1316 - Philips PAL ------------ */
+
+static struct tuner_range tuner_philips_td1316_pal_ranges[] = {
+ { 16 * 160.00 /*MHz*/, 0xa1, },
+ { 16 * 442.00 /*MHz*/, 0xa2, },
+ { 16 * 999.99 , 0xa4, },
+};
+
+static struct tuner_params tuner_philips_td1316_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_PAL,
+ .ranges = tuner_philips_td1316_pal_ranges,
+ .count = ARRAY_SIZE(tuner_philips_td1316_pal_ranges),
+ .config = 0xc8,
+ },
+};
+
+/* ------------ TUNER_PHILIPS_TUV1236D - Philips ATSC ------------ */
+
+static struct tuner_range tuner_tuv1236d_ntsc_ranges[] = {
+ { 16 * 157.25 /*MHz*/, 0x01, },
+ { 16 * 454.00 /*MHz*/, 0x02, },
+ { 16 * 999.99 , 0x04, },
+};
+
+
+static struct tuner_params tuner_tuner_tuv1236d_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_tuv1236d_ntsc_ranges,
+ .count = ARRAY_SIZE(tuner_tuv1236d_ntsc_ranges),
+ .config = 0xce,
+ },
+};
+
+/* ------------ TUNER_TNF_5335MF - Philips NTSC ------------ */
+
+static struct tuner_range tuner_tnf_5335mf_ntsc_ranges[] = {
+ { 16 * 157.25 /*MHz*/, 0x01, },
+ { 16 * 454.00 /*MHz*/, 0x02, },
+ { 16 * 999.99 , 0x04, },
+};
+
+static struct tuner_params tuner_tnf_5335mf_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_tnf_5335mf_ntsc_ranges,
+ .count = ARRAY_SIZE(tuner_tnf_5335mf_ntsc_ranges),
+ .config = 0x8e,
+ },
+};
+
+/* 70-79 */
+/* ------------ TUNER_SAMSUNG_TCPN_2121P30A - Samsung NTSC ------------ */
+
+static struct tuner_range tuner_samsung_tcpn_2121p30a_ntsc_ranges[] = {
+ { 16 * 175.75 /*MHz*/, 0x01, },
+ { 16 * 410.25 /*MHz*/, 0x02, },
+ { 16 * 999.99 , 0x08, },
+};
+
+static struct tuner_params tuner_samsung_tcpn_2121p30a_params[] = {
+ {
+ .type = TUNER_PARAM_TYPE_NTSC,
+ .ranges = tuner_samsung_tcpn_2121p30a_ntsc_ranges,
+ .count = ARRAY_SIZE(tuner_samsung_tcpn_2121p30a_ntsc_ranges),
+ .config = 0xce,
+ },
+};
+
+/* --------------------------------------------------------------------- */
+
+struct tunertype tuners[] = {
+ /* 0-9 */
+ [TUNER_TEMIC_PAL] = { /* TEMIC PAL */
+ .name = "Temic PAL (4002 FH5)",
+ .params = tuner_temic_pal_params,
+ },
+ [TUNER_PHILIPS_PAL_I] = { /* Philips PAL_I */
+ .name = "Philips PAL_I (FI1246 and compatibles)",
+ .params = tuner_philips_pal_i_params,
+ },
+ [TUNER_PHILIPS_NTSC] = { /* Philips NTSC */
+ .name = "Philips NTSC (FI1236,FM1236 and compatibles)",
+ .params = tuner_philips_ntsc_params,
+ },
+ [TUNER_PHILIPS_SECAM] = { /* Philips SECAM */
+ .name = "Philips (SECAM+PAL_BG) (FI1216MF, FM1216MF, FR1216MF)",
+ .params = tuner_philips_secam_params,
+ },
+ [TUNER_ABSENT] = { /* Tuner Absent */
+ .name = "NoTuner",
+ },
+ [TUNER_PHILIPS_PAL] = { /* Philips PAL */
+ .name = "Philips PAL_BG (FI1216 and compatibles)",
+ .params = tuner_philips_pal_params,
+ },
+ [TUNER_TEMIC_NTSC] = { /* TEMIC NTSC */
+ .name = "Temic NTSC (4032 FY5)",
+ .params = tuner_temic_ntsc_params,
+ },
+ [TUNER_TEMIC_PAL_I] = { /* TEMIC PAL_I */
+ .name = "Temic PAL_I (4062 FY5)",
+ .params = tuner_temic_pal_i_params,
+ },
+ [TUNER_TEMIC_4036FY5_NTSC] = { /* TEMIC NTSC */
+ .name = "Temic NTSC (4036 FY5)",
+ .params = tuner_temic_4036fy5_ntsc_params,
+ },
+ [TUNER_ALPS_TSBH1_NTSC] = { /* TEMIC NTSC */
+ .name = "Alps HSBH1",
+ .params = tuner_alps_tsbh1_ntsc_params,
+ },
+
+ /* 10-19 */
+ [TUNER_ALPS_TSBE1_PAL] = { /* TEMIC PAL */
+ .name = "Alps TSBE1",
+ .params = tuner_alps_tsb_1_params,
+ },
+ [TUNER_ALPS_TSBB5_PAL_I] = { /* Alps PAL_I */
+ .name = "Alps TSBB5",
+ .params = tuner_alps_tsbb5_params,
+ },
+ [TUNER_ALPS_TSBE5_PAL] = { /* Alps PAL */
+ .name = "Alps TSBE5",
+ .params = tuner_alps_tsbe5_params,
+ },
+ [TUNER_ALPS_TSBC5_PAL] = { /* Alps PAL */
+ .name = "Alps TSBC5",
+ .params = tuner_alps_tsbc5_params,
+ },
+ [TUNER_TEMIC_4006FH5_PAL] = { /* TEMIC PAL */
+ .name = "Temic PAL_BG (4006FH5)",
+ .params = tuner_temic_4006fh5_params,
+ },
+ [TUNER_ALPS_TSHC6_NTSC] = { /* Alps NTSC */
+ .name = "Alps TSCH6",
+ .params = tuner_alps_tshc6_params,
+ },
+ [TUNER_TEMIC_PAL_DK] = { /* TEMIC PAL */
+ .name = "Temic PAL_DK (4016 FY5)",
+ .params = tuner_temic_pal_dk_params,
+ },
+ [TUNER_PHILIPS_NTSC_M] = { /* Philips NTSC */
+ .name = "Philips NTSC_M (MK2)",
+ .params = tuner_philips_ntsc_m_params,
+ },
+ [TUNER_TEMIC_4066FY5_PAL_I] = { /* TEMIC PAL_I */
+ .name = "Temic PAL_I (4066 FY5)",
+ .params = tuner_temic_4066fy5_pal_i_params,
+ },
+ [TUNER_TEMIC_4006FN5_MULTI_PAL] = { /* TEMIC PAL */
+ .name = "Temic PAL* auto (4006 FN5)",
+ .params = tuner_temic_4006fn5_multi_params,
+ },
+
+ /* 20-29 */
+ [TUNER_TEMIC_4009FR5_PAL] = { /* TEMIC PAL */
+ .name = "Temic PAL_BG (4009 FR5) or PAL_I (4069 FR5)",
+ .params = tuner_temic_4009f_5_params,
+ },
+ [TUNER_TEMIC_4039FR5_NTSC] = { /* TEMIC NTSC */
+ .name = "Temic NTSC (4039 FR5)",
+ .params = tuner_temic_4039fr5_params,
+ },
+ [TUNER_TEMIC_4046FM5] = { /* TEMIC PAL */
+ .name = "Temic PAL/SECAM multi (4046 FM5)",
+ .params = tuner_temic_4046fm5_params,
+ },
+ [TUNER_PHILIPS_PAL_DK] = { /* Philips PAL */
+ .name = "Philips PAL_DK (FI1256 and compatibles)",
+ .params = tuner_philips_pal_dk_params,
+ },
+ [TUNER_PHILIPS_FQ1216ME] = { /* Philips PAL */
+ .name = "Philips PAL/SECAM multi (FQ1216ME)",
+ .params = tuner_philips_fq1216me_params,
+ },
+ [TUNER_LG_PAL_I_FM] = { /* LGINNOTEK PAL_I */
+ .name = "LG PAL_I+FM (TAPC-I001D)",
+ .params = tuner_lg_pal_i_fm_params,
+ },
+ [TUNER_LG_PAL_I] = { /* LGINNOTEK PAL_I */
+ .name = "LG PAL_I (TAPC-I701D)",
+ .params = tuner_lg_pal_i_params,
+ },
+ [TUNER_LG_NTSC_FM] = { /* LGINNOTEK NTSC */
+ .name = "LG NTSC+FM (TPI8NSR01F)",
+ .params = tuner_lg_ntsc_fm_params,
+ },
+ [TUNER_LG_PAL_FM] = { /* LGINNOTEK PAL */
+ .name = "LG PAL_BG+FM (TPI8PSB01D)",
+ .params = tuner_lg_pal_fm_params,
+ },
+ [TUNER_LG_PAL] = { /* LGINNOTEK PAL */
+ .name = "LG PAL_BG (TPI8PSB11D)",
+ .params = tuner_lg_pal_params,
+ },
+
+ /* 30-39 */
+ [TUNER_TEMIC_4009FN5_MULTI_PAL_FM] = { /* TEMIC PAL */
+ .name = "Temic PAL* auto + FM (4009 FN5)",
+ .params = tuner_temic_4009_fn5_multi_pal_fm_params,
+ },
+ [TUNER_SHARP_2U5JF5540_NTSC] = { /* SHARP NTSC */
+ .name = "SHARP NTSC_JP (2U5JF5540)",
+ .params = tuner_sharp_2u5jf5540_params,
+ },
+ [TUNER_Samsung_PAL_TCPM9091PD27] = { /* Samsung PAL */
+ .name = "Samsung PAL TCPM9091PD27",
+ .params = tuner_samsung_pal_tcpm9091pd27_params,
+ },
+ [TUNER_MT2032] = { /* Microtune PAL|NTSC */
+ .name = "MT20xx universal",
+ /* see mt20xx.c for details */ },
+ [TUNER_TEMIC_4106FH5] = { /* TEMIC PAL */
+ .name = "Temic PAL_BG (4106 FH5)",
+ .params = tuner_temic_4106fh5_params,
+ },
+ [TUNER_TEMIC_4012FY5] = { /* TEMIC PAL */
+ .name = "Temic PAL_DK/SECAM_L (4012 FY5)",
+ .params = tuner_temic_4012fy5_params,
+ },
+ [TUNER_TEMIC_4136FY5] = { /* TEMIC NTSC */
+ .name = "Temic NTSC (4136 FY5)",
+ .params = tuner_temic_4136_fy5_params,
+ },
+ [TUNER_LG_PAL_NEW_TAPC] = { /* LGINNOTEK PAL */
+ .name = "LG PAL (newer TAPC series)",
+ .params = tuner_lg_pal_new_tapc_params,
+ },
+ [TUNER_PHILIPS_FM1216ME_MK3] = { /* Philips PAL */
+ .name = "Philips PAL/SECAM multi (FM1216ME MK3)",
+ .params = tuner_fm1216me_mk3_params,
+ },
+ [TUNER_LG_NTSC_NEW_TAPC] = { /* LGINNOTEK NTSC */
+ .name = "LG NTSC (newer TAPC series)",
+ .params = tuner_lg_ntsc_new_tapc_params,
+ },
+
+ /* 40-49 */
+ [TUNER_HITACHI_NTSC] = { /* HITACHI NTSC */
+ .name = "HITACHI V7-J180AT",
+ .params = tuner_hitachi_ntsc_params,
+ },
+ [TUNER_PHILIPS_PAL_MK] = { /* Philips PAL */
+ .name = "Philips PAL_MK (FI1216 MK)",
+ .params = tuner_philips_pal_mk_params,
+ },
+ [TUNER_PHILIPS_ATSC] = { /* Philips ATSC */
+ .name = "Philips 1236D ATSC/NTSC dual in",
+ .params = tuner_philips_atsc_params,
+ },
+ [TUNER_PHILIPS_FM1236_MK3] = { /* Philips NTSC */
+ .name = "Philips NTSC MK3 (FM1236MK3 or FM1236/F)",
+ .params = tuner_fm1236_mk3_params,
+ },
+ [TUNER_PHILIPS_4IN1] = { /* Philips NTSC */
+ .name = "Philips 4 in 1 (ATI TV Wonder Pro/Conexant)",
+ .params = tuner_philips_4in1_params,
+ },
+ [TUNER_MICROTUNE_4049FM5] = { /* Microtune PAL */
+ .name = "Microtune 4049 FM5",
+ .params = tuner_microtune_4049_fm5_params,
+ },
+ [TUNER_PANASONIC_VP27] = { /* Panasonic NTSC */
+ .name = "Panasonic VP27s/ENGE4324D",
+ .params = tuner_panasonic_vp27_params,
+ },
+ [TUNER_LG_NTSC_TAPE] = { /* LGINNOTEK NTSC */
+ .name = "LG NTSC (TAPE series)",
+ .params = tuner_lg_ntsc_tape_params,
+ },
+ [TUNER_TNF_8831BGFF] = { /* Philips PAL */
+ .name = "Tenna TNF 8831 BGFF)",
+ .params = tuner_tnf_8831bgff_params,
+ },
+ [TUNER_MICROTUNE_4042FI5] = { /* Microtune NTSC */
+ .name = "Microtune 4042 FI5 ATSC/NTSC dual in",
+ .params = tuner_microtune_4042fi5_params,
+ },
+
+ /* 50-59 */
+ [TUNER_TCL_2002N] = { /* TCL NTSC */
+ .name = "TCL 2002N",
+ .params = tuner_tcl_2002n_params,
+ },
+ [TUNER_PHILIPS_FM1256_IH3] = { /* Philips PAL */
+ .name = "Philips PAL/SECAM_D (FM 1256 I-H3)",
+ .params = tuner_philips_fm1256_ih3_params,
+ },
+ [TUNER_THOMSON_DTT7610] = { /* THOMSON ATSC */
+ .name = "Thomson DTT 7610 (ATSC/NTSC)",
+ .params = tuner_thomson_dtt7610_params,
+ },
+ [TUNER_PHILIPS_FQ1286] = { /* Philips NTSC */
+ .name = "Philips FQ1286",
+ .params = tuner_philips_fq1286_params,
+ },
+ [TUNER_PHILIPS_TDA8290] = { /* Philips PAL|NTSC */
+ .name = "tda8290+75",
+ /* see tda8290.c for details */ },
+ [TUNER_TCL_2002MB] = { /* TCL PAL */
+ .name = "TCL 2002MB",
+ .params = tuner_tcl_2002mb_params,
+ },
+ [TUNER_PHILIPS_FQ1216AME_MK4] = { /* Philips PAL */
+ .name = "Philips PAL/SECAM multi (FQ1216AME MK4)",
+ .params = tuner_philips_fq1216ame_mk4_params,
+ },
+ [TUNER_PHILIPS_FQ1236A_MK4] = { /* Philips NTSC */
+ .name = "Philips FQ1236A MK4",
+ .params = tuner_philips_fq1236a_mk4_params,
+ },
+ [TUNER_YMEC_TVF_8531MF] = { /* Philips NTSC */
+ .name = "Ymec TVision TVF-8531MF/8831MF/8731MF",
+ .params = tuner_ymec_tvf_8531mf_params,
+ },
+ [TUNER_YMEC_TVF_5533MF] = { /* Philips NTSC */
+ .name = "Ymec TVision TVF-5533MF",
+ .params = tuner_ymec_tvf_5533mf_params,
+ },
+
+ /* 60-69 */
+ [TUNER_THOMSON_DTT761X] = { /* THOMSON ATSC */
+ /* DTT 7611 7611A 7612 7613 7613A 7614 7615 7615A */
+ .name = "Thomson DTT 761X (ATSC/NTSC)",
+ .params = tuner_thomson_dtt761x_params,
+ },
+ [TUNER_TENA_9533_DI] = { /* Philips PAL */
+ .name = "Tena TNF9533-D/IF/TNF9533-B/DF",
+ .params = tuner_tena_9533_di_params,
+ },
+ [TUNER_TEA5767] = { /* Philips RADIO */
+ .name = "Philips TEA5767HN FM Radio",
+ /* see tea5767.c for details */
+ },
+ [TUNER_PHILIPS_FMD1216ME_MK3] = { /* Philips PAL */
+ .name = "Philips FMD1216ME MK3 Hybrid Tuner",
+ .params = tuner_tuner_philips_fmd1216me_mk3_params,
+ },
+ [TUNER_LG_TDVS_H062F] = { /* LGINNOTEK ATSC */
+ .name = "LG TDVS-H062F/TUA6034",
+ .params = tuner_tua6034_params,
+ },
+ [TUNER_YMEC_TVF66T5_B_DFF] = { /* Philips PAL */
+ .name = "Ymec TVF66T5-B/DFF",
+ .params = tuner_ymec_tvf66t5_b_dff_params,
+ },
+ [TUNER_LG_NTSC_TALN_MINI] = { /* LGINNOTEK NTSC */
+ .name = "LG NTSC (TALN mini series)",
+ .params = tuner_lg_taln_mini_params,
+ },
+ [TUNER_PHILIPS_TD1316] = { /* Philips PAL */
+ .name = "Philips TD1316 Hybrid Tuner",
+ .params = tuner_philips_td1316_params,
+ },
+ [TUNER_PHILIPS_TUV1236D] = { /* Philips ATSC */
+ .name = "Philips TUV1236D ATSC/NTSC dual in",
+ .params = tuner_tuner_tuv1236d_params,
+ },
+ [TUNER_TNF_5335MF] = { /* Philips NTSC */
+ .name = "Tena TNF 5335 MF",
+ .params = tuner_tnf_5335mf_params,
+ },
+
+ /* 70-79 */
+ [TUNER_SAMSUNG_TCPN_2121P30A] = { /* Samsung NTSC */
+ .name = "Samsung TCPN 2121P30A",
+ .params = tuner_samsung_tcpn_2121p30a_params,
+ },
+};
+
+unsigned const int tuner_count = ARRAY_SIZE(tuners);
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
index 5e71a354e879..582551b0969b 100644
--- a/drivers/media/video/tveeprom.c
+++ b/drivers/media/video/tveeprom.c
@@ -190,7 +190,7 @@ hauppauge_tuner[] =
{ TUNER_LG_PAL_NEW_TAPC, "TCL 2002MI 3"},
{ TUNER_TCL_2002N, "TCL 2002N 6A"},
{ TUNER_PHILIPS_FM1236_MK3, "Philips FQ1236 MK3"},
- { TUNER_ABSENT, "Samsung TCPN 2121P30A"},
+ { TUNER_SAMSUNG_TCPN_2121P30A, "Samsung TCPN 2121P30A"},
{ TUNER_ABSENT, "Samsung TCPE 4121P30A"},
{ TUNER_PHILIPS_FM1216ME_MK3, "TCL MFPE05 2"},
/* 90-99 */
diff --git a/drivers/media/video/tvp5150.c b/drivers/media/video/tvp5150.c
index 9094fa9f2ecb..fad9ea0ae4f2 100644
--- a/drivers/media/video/tvp5150.c
+++ b/drivers/media/video/tvp5150.c
@@ -634,7 +634,7 @@ struct i2c_vbi_ram_value {
unsigned char values[26];
};
-struct i2c_vbi_ram_value vbi_ram_default[] =
+static struct i2c_vbi_ram_value vbi_ram_default[] =
{
{0x010, /* WST SECAM 6 */
{ 0xaa, 0xaa, 0xff, 0xff , 0xe7, 0x2e, 0x20, 0x26, 0xe6, 0xb4, 0x0e, 0x0, 0x0, 0x0, 0x10, 0x0 }
diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c
index 5dbd7c1b362a..cd2c4475525e 100644
--- a/drivers/media/video/v4l2-common.c
+++ b/drivers/media/video/v4l2-common.c
@@ -306,6 +306,7 @@ static const char *v4l2_int_ioctls[] = {
#endif
[_IOC_NR(AUDC_SET_RADIO)] = "AUDC_SET_RADIO",
[_IOC_NR(AUDC_SET_INPUT)] = "AUDC_SET_INPUT",
+ [_IOC_NR(MSP_SET_MATRIX)] = "MSP_SET_MATRIX",
[_IOC_NR(TUNER_SET_TYPE_ADDR)] = "TUNER_SET_TYPE_ADDR",
[_IOC_NR(TUNER_SET_STANDBY)] = "TUNER_SET_STANDBY",
diff --git a/drivers/media/video/videodev.c b/drivers/media/video/videodev.c
index d5be25987142..078880e4c8c0 100644
--- a/drivers/media/video/videodev.c
+++ b/drivers/media/video/videodev.c
@@ -29,7 +29,6 @@
#include <linux/devfs_fs_kernel.h>
#include <asm/uaccess.h>
#include <asm/system.h>
-#include <asm/semaphore.h>
#include <linux/videodev.h>
@@ -83,7 +82,7 @@ static struct class video_class = {
*/
static struct video_device *video_device[VIDEO_NUM_DEVICES];
-static DECLARE_MUTEX(videodev_lock);
+static DEFINE_MUTEX(videodev_lock);
struct video_device* video_devdata(struct file *file)
{
@@ -102,15 +101,15 @@ static int video_open(struct inode *inode, struct file *file)
if(minor>=VIDEO_NUM_DEVICES)
return -ENODEV;
- down(&videodev_lock);
+ mutex_lock(&videodev_lock);
vfl=video_device[minor];
if(vfl==NULL) {
- up(&videodev_lock);
+ mutex_unlock(&videodev_lock);
request_module("char-major-%d-%d", VIDEO_MAJOR, minor);
- down(&videodev_lock);
+ mutex_lock(&videodev_lock);
vfl=video_device[minor];
if (vfl==NULL) {
- up(&videodev_lock);
+ mutex_unlock(&videodev_lock);
return -ENODEV;
}
}
@@ -123,7 +122,7 @@ static int video_open(struct inode *inode, struct file *file)
file->f_op = fops_get(old_fops);
}
fops_put(old_fops);
- up(&videodev_lock);
+ mutex_unlock(&videodev_lock);
return err;
}
@@ -304,12 +303,12 @@ int video_register_device(struct video_device *vfd, int type, int nr)
}
/* pick a minor number */
- down(&videodev_lock);
+ mutex_lock(&videodev_lock);
if (nr >= 0 && nr < end-base) {
/* use the one the driver asked for */
i = base+nr;
if (NULL != video_device[i]) {
- up(&videodev_lock);
+ mutex_unlock(&videodev_lock);
return -ENFILE;
}
} else {
@@ -318,13 +317,13 @@ int video_register_device(struct video_device *vfd, int type, int nr)
if (NULL == video_device[i])
break;
if (i == end) {
- up(&videodev_lock);
+ mutex_unlock(&videodev_lock);
return -ENFILE;
}
}
video_device[i]=vfd;
vfd->minor=i;
- up(&videodev_lock);
+ mutex_unlock(&videodev_lock);
sprintf(vfd->devfs_name, "v4l/%s%d", name_base, i - base);
devfs_mk_cdev(MKDEV(VIDEO_MAJOR, vfd->minor),
@@ -362,14 +361,14 @@ int video_register_device(struct video_device *vfd, int type, int nr)
void video_unregister_device(struct video_device *vfd)
{
- down(&videodev_lock);
+ mutex_lock(&videodev_lock);
if(video_device[vfd->minor]!=vfd)
panic("videodev: bad unregister");
devfs_remove(vfd->devfs_name);
video_device[vfd->minor]=NULL;
class_device_unregister(&vfd->class_dev);
- up(&videodev_lock);
+ mutex_unlock(&videodev_lock);
}
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index eafa23f5cbd6..effa0d7a73ac 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -31,6 +31,7 @@ config MTD_JEDECPROBE
config MTD_GEN_PROBE
tristate
+ select OBSOLETE_INTERMODULE
config MTD_CFI_ADV_OPTIONS
bool "Flash chip driver advanced configuration options"
@@ -259,7 +260,7 @@ config MTD_ABSENT
with this driver will return -ENODEV upon access.
config MTD_OBSOLETE_CHIPS
- depends on MTD && BROKEN
+ depends on MTD
bool "Older (theoretically obsoleted now) drivers for non-CFI chips"
help
This option does not enable any code directly, but will allow you to
@@ -272,7 +273,7 @@ config MTD_OBSOLETE_CHIPS
config MTD_AMDSTD
tristate "AMD compatible flash chip support (non-CFI)"
- depends on MTD && MTD_OBSOLETE_CHIPS
+ depends on MTD && MTD_OBSOLETE_CHIPS && BROKEN
help
This option enables support for flash chips using AMD-compatible
commands, including some which are not CFI-compatible and hence
@@ -290,7 +291,7 @@ config MTD_SHARP
config MTD_JEDEC
tristate "JEDEC device support"
- depends on MTD && MTD_OBSOLETE_CHIPS
+ depends on MTD && MTD_OBSOLETE_CHIPS && BROKEN
help
Enable older older JEDEC flash interface devices for self
programming flash. It is commonly used in older AMD chips. It is
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 5038e90ceb12..dd628cb51e31 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -218,6 +218,7 @@ config MTD_DOC2001PLUS
config MTD_DOCPROBE
tristate
select MTD_DOCECC
+ select OBSOLETE_INTERMODULE
config MTD_DOCECC
tristate
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index fab6586d87e9..ef54ebeb29b8 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -93,6 +93,9 @@
Deepak Saxena : dsaxena@plexity.net
: Intel IXDP2351 platform support
+ Dmitry Pervushin : dpervushin@ru.mvista.com
+ : PNX010X platform support
+
*/
/* Always include 'config.h' first in case the user wants to turn on
diff --git a/drivers/video/sbuslib.c b/drivers/video/sbuslib.c
index 3a74a63dd4f2..55e6e2d60d3a 100644
--- a/drivers/video/sbuslib.c
+++ b/drivers/video/sbuslib.c
@@ -216,10 +216,10 @@ static int fbiogetputcmap(struct file *file, struct fb_info *info,
ret |= put_user(compat_ptr(addr), &p->blue);
if (ret)
return -EFAULT;
- return info->fbops->fb_ioctl(file->f_dentry->d_inode, file,
+ return info->fbops->fb_ioctl(info,
(cmd == FBIOPUTCMAP32) ?
FBIOPUTCMAP_SPARC : FBIOGETCMAP_SPARC,
- (unsigned long)p, info);
+ (unsigned long)p);
}
struct fbcursor32 {
@@ -260,12 +260,11 @@ static int fbiogscursor(struct file *file, struct fb_info *info,
ret |= put_user(compat_ptr(addr), &p->image);
if (ret)
return -EFAULT;
- return info->fbops->fb_ioctl(file->f_dentry->d_inode, file,
- FBIOSCURSOR, (unsigned long)p, info);
+ return info->fbops->fb_ioctl(info, FBIOSCURSOR, (unsigned long)p);
}
-long sbusfb_compat_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg, struct fb_info *info)
+long sbusfb_compat_ioctl(struct fb_info *info, unsigned int cmd,
+ unsigned long arg)
{
switch (cmd) {
case FBIOGTYPE:
@@ -278,14 +277,13 @@ long sbusfb_compat_ioctl(struct file *file, unsigned int cmd,
case FBIOSCURPOS:
case FBIOGCURPOS:
case FBIOGCURMAX:
- return info->fbops->fb_ioctl(file->f_dentry->d_inode,
- file, cmd, arg, info);
+ return info->fbops->fb_ioctl(info, cmd, arg);
case FBIOPUTCMAP32:
- return fbiogetputcmap(file, info, cmd, arg);
+ return fbiogetputcmap(info, cmd, arg);
case FBIOGETCMAP32:
- return fbiogetputcmap(file, info, cmd, arg);
+ return fbiogetputcmap(info, cmd, arg);
case FBIOSCURSOR32:
- return fbiogscursor(file, info, arg);
+ return fbiogscursor(info, arg);
default:
return -ENOIOCTLCMD;
}
diff --git a/drivers/video/sbuslib.h b/drivers/video/sbuslib.h
index b470e52ce9e2..f753939013ed 100644
--- a/drivers/video/sbuslib.h
+++ b/drivers/video/sbuslib.h
@@ -20,7 +20,7 @@ extern int sbusfb_mmap_helper(struct sbus_mmap_map *map,
int sbusfb_ioctl_helper(unsigned long cmd, unsigned long arg,
struct fb_info *info,
int type, int fb_depth, unsigned long fb_size);
-long sbusfb_compat_ioctl(struct file *file, unsigned int cmd,
- unsigned long arg, struct fb_info *info);
+long sbusfb_compat_ioctl(struct fb_info *info, unsigned int cmd,
+ unsigned long arg);
#endif /* _SBUSLIB_H */
diff --git a/fs/buffer.c b/fs/buffer.c
index 7cdf48a9a501..3dc712f29d2d 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -1027,7 +1027,7 @@ try_again:
/* Link the buffer to its page */
set_bh_page(bh, page, offset);
- bh->b_end_io = NULL;
+ init_buffer(bh, NULL, NULL);
}
return head;
/*
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index e08ab4702d97..4526da8907c6 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -21,18 +21,18 @@ MODULE_ALIAS_MISCDEV(FUSE_MINOR);
static kmem_cache_t *fuse_req_cachep;
-static inline struct fuse_conn *fuse_get_conn(struct file *file)
+static struct fuse_conn *fuse_get_conn(struct file *file)
{
struct fuse_conn *fc;
spin_lock(&fuse_lock);
fc = file->private_data;
- if (fc && !fc->mounted)
+ if (fc && !fc->connected)
fc = NULL;
spin_unlock(&fuse_lock);
return fc;
}
-static inline void fuse_request_init(struct fuse_req *req)
+static void fuse_request_init(struct fuse_req *req)
{
memset(req, 0, sizeof(*req));
INIT_LIST_HEAD(&req->list);
@@ -53,7 +53,7 @@ void fuse_request_free(struct fuse_req *req)
kmem_cache_free(fuse_req_cachep, req);
}
-static inline void block_sigs(sigset_t *oldset)
+static void block_sigs(sigset_t *oldset)
{
sigset_t mask;
@@ -61,7 +61,7 @@ static inline void block_sigs(sigset_t *oldset)
sigprocmask(SIG_BLOCK, &mask, oldset);
}
-static inline void restore_sigs(sigset_t *oldset)
+static void restore_sigs(sigset_t *oldset)
{
sigprocmask(SIG_SETMASK, oldset, NULL);
}
@@ -109,18 +109,24 @@ struct fuse_req *fuse_get_request(struct fuse_conn *fc)
int intr;
sigset_t oldset;
+ atomic_inc(&fc->num_waiting);
block_sigs(&oldset);
intr = down_interruptible(&fc->outstanding_sem);
restore_sigs(&oldset);
- return intr ? NULL : do_get_request(fc);
+ if (intr) {
+ atomic_dec(&fc->num_waiting);
+ return NULL;
+ }
+ return do_get_request(fc);
}
static void fuse_putback_request(struct fuse_conn *fc, struct fuse_req *req)
{
spin_lock(&fuse_lock);
- if (req->preallocated)
+ if (req->preallocated) {
+ atomic_dec(&fc->num_waiting);
list_add(&req->list, &fc->unused_list);
- else
+ } else
fuse_request_free(req);
/* If we are in debt decrease that first */
@@ -148,42 +154,23 @@ void fuse_release_background(struct fuse_req *req)
spin_unlock(&fuse_lock);
}
-static void process_init_reply(struct fuse_conn *fc, struct fuse_req *req)
-{
- int i;
- struct fuse_init_out *arg = &req->misc.init_out;
-
- if (arg->major != FUSE_KERNEL_VERSION)
- fc->conn_error = 1;
- else {
- fc->minor = arg->minor;
- fc->max_write = arg->minor < 5 ? 4096 : arg->max_write;
- }
-
- /* After INIT reply is received other requests can go
- out. So do (FUSE_MAX_OUTSTANDING - 1) number of
- up()s on outstanding_sem. The last up() is done in
- fuse_putback_request() */
- for (i = 1; i < FUSE_MAX_OUTSTANDING; i++)
- up(&fc->outstanding_sem);
-}
-
/*
* This function is called when a request is finished. Either a reply
* has arrived or it was interrupted (and not yet sent) or some error
- * occurred during communication with userspace, or the device file was
- * closed. It decreases the reference count for the request. In case
- * of a background request the reference to the stored objects are
- * released. The requester thread is woken up (if still waiting), and
- * finally the request is either freed or put on the unused_list
+ * occurred during communication with userspace, or the device file
+ * was closed. In case of a background request the reference to the
+ * stored objects are released. The requester thread is woken up (if
+ * still waiting), the 'end' callback is called if given, else the
+ * reference to the request is released
*
* Called with fuse_lock, unlocks it
*/
static void request_end(struct fuse_conn *fc, struct fuse_req *req)
{
- int putback;
- req->finished = 1;
- putback = atomic_dec_and_test(&req->count);
+ void (*end) (struct fuse_conn *, struct fuse_req *) = req->end;
+ req->end = NULL;
+ list_del(&req->list);
+ req->state = FUSE_REQ_FINISHED;
spin_unlock(&fuse_lock);
if (req->background) {
down_read(&fc->sbput_sem);
@@ -192,18 +179,10 @@ static void request_end(struct fuse_conn *fc, struct fuse_req *req)
up_read(&fc->sbput_sem);
}
wake_up(&req->waitq);
- if (req->in.h.opcode == FUSE_INIT)
- process_init_reply(fc, req);
- else if (req->in.h.opcode == FUSE_RELEASE && req->inode == NULL) {
- /* Special case for failed iget in CREATE */
- u64 nodeid = req->in.h.nodeid;
- __fuse_get_request(req);
- fuse_reset_request(req);
- fuse_send_forget(fc, req, nodeid, 1);
- putback = 0;
- }
- if (putback)
- fuse_putback_request(fc, req);
+ if (end)
+ end(fc, req);
+ else
+ fuse_put_request(fc, req);
}
/*
@@ -254,14 +233,16 @@ static void request_wait_answer(struct fuse_conn *fc, struct fuse_req *req)
spin_unlock(&fuse_lock);
block_sigs(&oldset);
- wait_event_interruptible(req->waitq, req->finished);
+ wait_event_interruptible(req->waitq, req->state == FUSE_REQ_FINISHED);
restore_sigs(&oldset);
spin_lock(&fuse_lock);
- if (req->finished)
+ if (req->state == FUSE_REQ_FINISHED && !req->interrupted)
return;
- req->out.h.error = -EINTR;
- req->interrupted = 1;
+ if (!req->interrupted) {
+ req->out.h.error = -EINTR;
+ req->interrupted = 1;
+ }
if (req->locked) {
/* This is uninterruptible sleep, because data is
being copied to/from the buffers of req. During
@@ -272,10 +253,10 @@ static void request_wait_answer(struct fuse_conn *fc, struct fuse_req *req)
wait_event(req->waitq, !req->locked);
spin_lock(&fuse_lock);
}
- if (!req->sent && !list_empty(&req->list)) {
+ if (req->state == FUSE_REQ_PENDING) {
list_del(&req->list);
__fuse_put_request(req);
- } else if (!req->finished && req->sent)
+ } else if (req->state == FUSE_REQ_SENT)
background_request(fc, req);
}
@@ -310,6 +291,7 @@ static void queue_request(struct fuse_conn *fc, struct fuse_req *req)
fc->outstanding_debt++;
}
list_add_tail(&req->list, &fc->pending);
+ req->state = FUSE_REQ_PENDING;
wake_up(&fc->waitq);
}
@@ -362,34 +344,12 @@ void request_send_background(struct fuse_conn *fc, struct fuse_req *req)
request_send_nowait(fc, req);
}
-void fuse_send_init(struct fuse_conn *fc)
-{
- /* This is called from fuse_read_super() so there's guaranteed
- to be a request available */
- struct fuse_req *req = do_get_request(fc);
- struct fuse_init_in *arg = &req->misc.init_in;
- arg->major = FUSE_KERNEL_VERSION;
- arg->minor = FUSE_KERNEL_MINOR_VERSION;
- req->in.h.opcode = FUSE_INIT;
- req->in.numargs = 1;
- req->in.args[0].size = sizeof(*arg);
- req->in.args[0].value = arg;
- req->out.numargs = 1;
- /* Variable length arguement used for backward compatibility
- with interface version < 7.5. Rest of init_out is zeroed
- by do_get_request(), so a short reply is not a problem */
- req->out.argvar = 1;
- req->out.args[0].size = sizeof(struct fuse_init_out);
- req->out.args[0].value = &req->misc.init_out;
- request_send_background(fc, req);
-}
-
/*
* Lock the request. Up to the next unlock_request() there mustn't be
* anything that could cause a page-fault. If the request was already
* interrupted bail out.
*/
-static inline int lock_request(struct fuse_req *req)
+static int lock_request(struct fuse_req *req)
{
int err = 0;
if (req) {
@@ -408,7 +368,7 @@ static inline int lock_request(struct fuse_req *req)
* requester thread is currently waiting for it to be unlocked, so
* wake it up.
*/
-static inline void unlock_request(struct fuse_req *req)
+static void unlock_request(struct fuse_req *req)
{
if (req) {
spin_lock(&fuse_lock);
@@ -444,7 +404,7 @@ static void fuse_copy_init(struct fuse_copy_state *cs, int write,
}
/* Unmap and put previous page of userspace buffer */
-static inline void fuse_copy_finish(struct fuse_copy_state *cs)
+static void fuse_copy_finish(struct fuse_copy_state *cs)
{
if (cs->mapaddr) {
kunmap_atomic(cs->mapaddr, KM_USER0);
@@ -493,8 +453,7 @@ static int fuse_copy_fill(struct fuse_copy_state *cs)
}
/* Do as much copy to/from userspace buffer as we can */
-static inline int fuse_copy_do(struct fuse_copy_state *cs, void **val,
- unsigned *size)
+static int fuse_copy_do(struct fuse_copy_state *cs, void **val, unsigned *size)
{
unsigned ncpy = min(*size, cs->len);
if (val) {
@@ -514,8 +473,8 @@ static inline int fuse_copy_do(struct fuse_copy_state *cs, void **val,
* Copy a page in the request to/from the userspace buffer. Must be
* done atomically
*/
-static inline int fuse_copy_page(struct fuse_copy_state *cs, struct page *page,
- unsigned offset, unsigned count, int zeroing)
+static int fuse_copy_page(struct fuse_copy_state *cs, struct page *page,
+ unsigned offset, unsigned count, int zeroing)
{
if (page && zeroing && count < PAGE_SIZE) {
void *mapaddr = kmap_atomic(page, KM_USER1);
@@ -597,7 +556,7 @@ static void request_wait(struct fuse_conn *fc)
DECLARE_WAITQUEUE(wait, current);
add_wait_queue_exclusive(&fc->waitq, &wait);
- while (fc->mounted && list_empty(&fc->pending)) {
+ while (fc->connected && list_empty(&fc->pending)) {
set_current_state(TASK_INTERRUPTIBLE);
if (signal_pending(current))
break;
@@ -637,14 +596,15 @@ static ssize_t fuse_dev_readv(struct file *file, const struct iovec *iov,
goto err_unlock;
request_wait(fc);
err = -ENODEV;
- if (!fc->mounted)
+ if (!fc->connected)
goto err_unlock;
err = -ERESTARTSYS;
if (list_empty(&fc->pending))
goto err_unlock;
req = list_entry(fc->pending.next, struct fuse_req, list);
- list_del_init(&req->list);
+ req->state = FUSE_REQ_READING;
+ list_move(&req->list, &fc->io);
in = &req->in;
reqsize = in->h.len;
@@ -677,8 +637,8 @@ static ssize_t fuse_dev_readv(struct file *file, const struct iovec *iov,
if (!req->isreply)
request_end(fc, req);
else {
- req->sent = 1;
- list_add_tail(&req->list, &fc->processing);
+ req->state = FUSE_REQ_SENT;
+ list_move_tail(&req->list, &fc->processing);
spin_unlock(&fuse_lock);
}
return reqsize;
@@ -766,17 +726,23 @@ static ssize_t fuse_dev_writev(struct file *file, const struct iovec *iov,
goto err_finish;
spin_lock(&fuse_lock);
+ err = -ENOENT;
+ if (!fc->connected)
+ goto err_unlock;
+
req = request_find(fc, oh.unique);
err = -EINVAL;
if (!req)
goto err_unlock;
- list_del_init(&req->list);
if (req->interrupted) {
- request_end(fc, req);
+ spin_unlock(&fuse_lock);
fuse_copy_finish(&cs);
+ spin_lock(&fuse_lock);
+ request_end(fc, req);
return -ENOENT;
}
+ list_move(&req->list, &fc->io);
req->out.h = oh;
req->locked = 1;
cs.req = req;
@@ -830,19 +796,90 @@ static unsigned fuse_dev_poll(struct file *file, poll_table *wait)
return mask;
}
-/* Abort all requests on the given list (pending or processing) */
+/*
+ * Abort all requests on the given list (pending or processing)
+ *
+ * This function releases and reacquires fuse_lock
+ */
static void end_requests(struct fuse_conn *fc, struct list_head *head)
{
while (!list_empty(head)) {
struct fuse_req *req;
req = list_entry(head->next, struct fuse_req, list);
- list_del_init(&req->list);
req->out.h.error = -ECONNABORTED;
request_end(fc, req);
spin_lock(&fuse_lock);
}
}
+/*
+ * Abort requests under I/O
+ *
+ * The requests are set to interrupted and finished, and the request
+ * waiter is woken up. This will make request_wait_answer() wait
+ * until the request is unlocked and then return.
+ *
+ * If the request is asynchronous, then the end function needs to be
+ * called after waiting for the request to be unlocked (if it was
+ * locked).
+ */
+static void end_io_requests(struct fuse_conn *fc)
+{
+ while (!list_empty(&fc->io)) {
+ struct fuse_req *req =
+ list_entry(fc->io.next, struct fuse_req, list);
+ void (*end) (struct fuse_conn *, struct fuse_req *) = req->end;
+
+ req->interrupted = 1;
+ req->out.h.error = -ECONNABORTED;
+ req->state = FUSE_REQ_FINISHED;
+ list_del_init(&req->list);
+ wake_up(&req->waitq);
+ if (end) {
+ req->end = NULL;
+ /* The end function will consume this reference */
+ __fuse_get_request(req);
+ spin_unlock(&fuse_lock);
+ wait_event(req->waitq, !req->locked);
+ end(fc, req);
+ spin_lock(&fuse_lock);
+ }
+ }
+}
+
+/*
+ * Abort all requests.
+ *
+ * Emergency exit in case of a malicious or accidental deadlock, or
+ * just a hung filesystem.
+ *
+ * The same effect is usually achievable through killing the
+ * filesystem daemon and all users of the filesystem. The exception
+ * is the combination of an asynchronous request and the tricky
+ * deadlock (see Documentation/filesystems/fuse.txt).
+ *
+ * During the aborting, progression of requests from the pending and
+ * processing lists onto the io list, and progression of new requests
+ * onto the pending list is prevented by req->connected being false.
+ *
+ * Progression of requests under I/O to the processing list is
+ * prevented by the req->interrupted flag being true for these
+ * requests. For this reason requests on the io list must be aborted
+ * first.
+ */
+void fuse_abort_conn(struct fuse_conn *fc)
+{
+ spin_lock(&fuse_lock);
+ if (fc->connected) {
+ fc->connected = 0;
+ end_io_requests(fc);
+ end_requests(fc, &fc->pending);
+ end_requests(fc, &fc->processing);
+ wake_up_all(&fc->waitq);
+ }
+ spin_unlock(&fuse_lock);
+}
+
static int fuse_dev_release(struct inode *inode, struct file *file)
{
struct fuse_conn *fc;
@@ -853,9 +890,11 @@ static int fuse_dev_release(struct inode *inode, struct file *file)
fc->connected = 0;
end_requests(fc, &fc->pending);
end_requests(fc, &fc->processing);
- fuse_release_conn(fc);
}
spin_unlock(&fuse_lock);
+ if (fc)
+ kobject_put(&fc->kobj);
+
return 0;
}
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index 417bcee466f6..21fd59c7bc24 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -23,8 +23,7 @@
/*
* Calculate the time in jiffies until a dentry/attributes are valid
*/
-static inline unsigned long time_to_jiffies(unsigned long sec,
- unsigned long nsec)
+static unsigned long time_to_jiffies(unsigned long sec, unsigned long nsec)
{
struct timespec ts = {sec, nsec};
return jiffies + timespec_to_jiffies(&ts);
@@ -157,7 +156,7 @@ static int dir_alias(struct inode *inode)
return 0;
}
-static inline int invalid_nodeid(u64 nodeid)
+static int invalid_nodeid(u64 nodeid)
{
return !nodeid || nodeid == FUSE_ROOT_ID;
}
@@ -166,7 +165,7 @@ static struct dentry_operations fuse_dentry_operations = {
.d_revalidate = fuse_dentry_revalidate,
};
-static inline int valid_mode(int m)
+static int valid_mode(int m)
{
return S_ISREG(m) || S_ISDIR(m) || S_ISLNK(m) || S_ISCHR(m) ||
S_ISBLK(m) || S_ISFIFO(m) || S_ISSOCK(m);
@@ -763,13 +762,6 @@ static int parse_dirfile(char *buf, size_t nbytes, struct file *file,
return 0;
}
-static inline size_t fuse_send_readdir(struct fuse_req *req, struct file *file,
- struct inode *inode, loff_t pos,
- size_t count)
-{
- return fuse_send_read_common(req, file, inode, pos, count, 1);
-}
-
static int fuse_readdir(struct file *file, void *dstbuf, filldir_t filldir)
{
int err;
@@ -793,7 +785,9 @@ static int fuse_readdir(struct file *file, void *dstbuf, filldir_t filldir)
}
req->num_pages = 1;
req->pages[0] = page;
- nbytes = fuse_send_readdir(req, file, inode, file->f_pos, PAGE_SIZE);
+ fuse_read_fill(req, file, inode, file->f_pos, PAGE_SIZE, FUSE_READDIR);
+ request_send(fc, req);
+ nbytes = req->out.args[0].size;
err = req->out.h.error;
fuse_put_request(fc, req);
if (!err)
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 63d2980df5c9..a7ef5e716f3c 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -113,6 +113,14 @@ int fuse_open_common(struct inode *inode, struct file *file, int isdir)
return err;
}
+/* Special case for failed iget in CREATE */
+static void fuse_release_end(struct fuse_conn *fc, struct fuse_req *req)
+{
+ u64 nodeid = req->in.h.nodeid;
+ fuse_reset_request(req);
+ fuse_send_forget(fc, req, nodeid, 1);
+}
+
void fuse_send_release(struct fuse_conn *fc, struct fuse_file *ff,
u64 nodeid, struct inode *inode, int flags, int isdir)
{
@@ -128,6 +136,8 @@ void fuse_send_release(struct fuse_conn *fc, struct fuse_file *ff,
req->in.args[0].size = sizeof(struct fuse_release_in);
req->in.args[0].value = inarg;
request_send_background(fc, req);
+ if (!inode)
+ req->end = fuse_release_end;
kfree(ff);
}
@@ -240,38 +250,35 @@ static int fuse_fsync(struct file *file, struct dentry *de, int datasync)
return fuse_fsync_common(file, de, datasync, 0);
}
-size_t fuse_send_read_common(struct fuse_req *req, struct file *file,
- struct inode *inode, loff_t pos, size_t count,
- int isdir)
+void fuse_read_fill(struct fuse_req *req, struct file *file,
+ struct inode *inode, loff_t pos, size_t count, int opcode)
{
- struct fuse_conn *fc = get_fuse_conn(inode);
struct fuse_file *ff = file->private_data;
- struct fuse_read_in inarg;
+ struct fuse_read_in *inarg = &req->misc.read_in;
- memset(&inarg, 0, sizeof(struct fuse_read_in));
- inarg.fh = ff->fh;
- inarg.offset = pos;
- inarg.size = count;
- req->in.h.opcode = isdir ? FUSE_READDIR : FUSE_READ;
+ inarg->fh = ff->fh;
+ inarg->offset = pos;
+ inarg->size = count;
+ req->in.h.opcode = opcode;
req->in.h.nodeid = get_node_id(inode);
req->inode = inode;
req->file = file;
req->in.numargs = 1;
req->in.args[0].size = sizeof(struct fuse_read_in);
- req->in.args[0].value = &inarg;
+ req->in.args[0].value = inarg;
req->out.argpages = 1;
req->out.argvar = 1;
req->out.numargs = 1;
req->out.args[0].size = count;
- request_send(fc, req);
- return req->out.args[0].size;
}
-static inline size_t fuse_send_read(struct fuse_req *req, struct file *file,
- struct inode *inode, loff_t pos,
- size_t count)
+static size_t fuse_send_read(struct fuse_req *req, struct file *file,
+ struct inode *inode, loff_t pos, size_t count)
{
- return fuse_send_read_common(req, file, inode, pos, count, 0);
+ struct fuse_conn *fc = get_fuse_conn(inode);
+ fuse_read_fill(req, file, inode, pos, count, FUSE_READ);
+ request_send(fc, req);
+ return req->out.args[0].size;
}
static int fuse_readpage(struct file *file, struct page *page)
@@ -304,21 +311,33 @@ static int fuse_readpage(struct file *file, struct page *page)
return err;
}
-static int fuse_send_readpages(struct fuse_req *req, struct file *file,
- struct inode *inode)
+static void fuse_readpages_end(struct fuse_conn *fc, struct fuse_req *req)
{
- loff_t pos = page_offset(req->pages[0]);
- size_t count = req->num_pages << PAGE_CACHE_SHIFT;
- unsigned i;
- req->out.page_zeroing = 1;
- fuse_send_read(req, file, inode, pos, count);
+ int i;
+
+ fuse_invalidate_attr(req->pages[0]->mapping->host); /* atime changed */
+
for (i = 0; i < req->num_pages; i++) {
struct page *page = req->pages[i];
if (!req->out.h.error)
SetPageUptodate(page);
+ else
+ SetPageError(page);
unlock_page(page);
}
- return req->out.h.error;
+ fuse_put_request(fc, req);
+}
+
+static void fuse_send_readpages(struct fuse_req *req, struct file *file,
+ struct inode *inode)
+{
+ struct fuse_conn *fc = get_fuse_conn(inode);
+ loff_t pos = page_offset(req->pages[0]);
+ size_t count = req->num_pages << PAGE_CACHE_SHIFT;
+ req->out.page_zeroing = 1;
+ req->end = fuse_readpages_end;
+ fuse_read_fill(req, file, inode, pos, count, FUSE_READ);
+ request_send_background(fc, req);
}
struct fuse_readpages_data {
@@ -338,12 +357,12 @@ static int fuse_readpages_fill(void *_data, struct page *page)
(req->num_pages == FUSE_MAX_PAGES_PER_REQ ||
(req->num_pages + 1) * PAGE_CACHE_SIZE > fc->max_read ||
req->pages[req->num_pages - 1]->index + 1 != page->index)) {
- int err = fuse_send_readpages(req, data->file, inode);
- if (err) {
+ fuse_send_readpages(req, data->file, inode);
+ data->req = req = fuse_get_request(fc);
+ if (!req) {
unlock_page(page);
- return err;
+ return -EINTR;
}
- fuse_reset_request(req);
}
req->pages[req->num_pages] = page;
req->num_pages ++;
@@ -368,10 +387,8 @@ static int fuse_readpages(struct file *file, struct address_space *mapping,
return -EINTR;
err = read_cache_pages(mapping, pages, fuse_readpages_fill, &data);
- if (!err && data.req->num_pages)
- err = fuse_send_readpages(data.req, file, inode);
- fuse_put_request(fc, data.req);
- fuse_invalidate_attr(inode); /* atime changed */
+ if (!err)
+ fuse_send_readpages(data.req, file, inode);
return err;
}
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index 74c8d098a14a..46cf933aa3bf 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -94,6 +94,11 @@ struct fuse_out {
/** Header returned from userspace */
struct fuse_out_header h;
+ /*
+ * The following bitfields are not changed during the request
+ * processing
+ */
+
/** Last argument is variable length (can be shorter than
arg->size) */
unsigned argvar:1;
@@ -111,12 +116,23 @@ struct fuse_out {
struct fuse_arg args[3];
};
+/** The request state */
+enum fuse_req_state {
+ FUSE_REQ_INIT = 0,
+ FUSE_REQ_PENDING,
+ FUSE_REQ_READING,
+ FUSE_REQ_SENT,
+ FUSE_REQ_FINISHED
+};
+
+struct fuse_conn;
+
/**
* A request to the client
*/
struct fuse_req {
- /** This can be on either unused_list, pending or processing
- lists in fuse_conn */
+ /** This can be on either unused_list, pending processing or
+ io lists in fuse_conn */
struct list_head list;
/** Entry on the background list */
@@ -125,6 +141,12 @@ struct fuse_req {
/** refcount */
atomic_t count;
+ /*
+ * The following bitfields are either set once before the
+ * request is queued or setting/clearing them is protected by
+ * fuse_lock
+ */
+
/** True if the request has reply */
unsigned isreply:1;
@@ -140,11 +162,8 @@ struct fuse_req {
/** Data is being copied to/from the request */
unsigned locked:1;
- /** Request has been sent to userspace */
- unsigned sent:1;
-
- /** The request is finished */
- unsigned finished:1;
+ /** State of the request */
+ enum fuse_req_state state;
/** The request input */
struct fuse_in in;
@@ -161,6 +180,7 @@ struct fuse_req {
struct fuse_release_in release_in;
struct fuse_init_in init_in;
struct fuse_init_out init_out;
+ struct fuse_read_in read_in;
} misc;
/** page vector */
@@ -180,6 +200,9 @@ struct fuse_req {
/** File used in the request (or NULL) */
struct file *file;
+
+ /** Request completion callback */
+ void (*end)(struct fuse_conn *, struct fuse_req *);
};
/**
@@ -190,9 +213,6 @@ struct fuse_req {
* unmounted.
*/
struct fuse_conn {
- /** Reference count */
- int count;
-
/** The user id for this mount */
uid_t user_id;
@@ -217,6 +237,9 @@ struct fuse_conn {
/** The list of requests being processed */
struct list_head processing;
+ /** The list of requests under I/O */
+ struct list_head io;
+
/** Requests put in the background (RELEASE or any other
interrupted request) */
struct list_head background;
@@ -238,14 +261,22 @@ struct fuse_conn {
u64 reqctr;
/** Mount is active */
- unsigned mounted : 1;
+ unsigned mounted;
- /** Connection established */
- unsigned connected : 1;
+ /** Connection established, cleared on umount, connection
+ abort and device release */
+ unsigned connected;
- /** Connection failed (version mismatch) */
+ /** Connection failed (version mismatch). Cannot race with
+ setting other bitfields since it is only set once in INIT
+ reply, before any other request, and never cleared */
unsigned conn_error : 1;
+ /*
+ * The following bitfields are only for optimization purposes
+ * and hence races in setting them will not cause malfunction
+ */
+
/** Is fsync not implemented by fs? */
unsigned no_fsync : 1;
@@ -273,21 +304,22 @@ struct fuse_conn {
/** Is create not implemented by fs? */
unsigned no_create : 1;
+ /** The number of requests waiting for completion */
+ atomic_t num_waiting;
+
/** Negotiated minor version */
unsigned minor;
/** Backing dev info */
struct backing_dev_info bdi;
-};
-static inline struct fuse_conn **get_fuse_conn_super_p(struct super_block *sb)
-{
- return (struct fuse_conn **) &sb->s_fs_info;
-}
+ /** kobject */
+ struct kobject kobj;
+};
static inline struct fuse_conn *get_fuse_conn_super(struct super_block *sb)
{
- return *get_fuse_conn_super_p(sb);
+ return sb->s_fs_info;
}
static inline struct fuse_conn *get_fuse_conn(struct inode *inode)
@@ -295,6 +327,11 @@ static inline struct fuse_conn *get_fuse_conn(struct inode *inode)
return get_fuse_conn_super(inode->i_sb);
}
+static inline struct fuse_conn *get_fuse_conn_kobj(struct kobject *obj)
+{
+ return container_of(obj, struct fuse_conn, kobj);
+}
+
static inline struct fuse_inode *get_fuse_inode(struct inode *inode)
{
return container_of(inode, struct fuse_inode, inode);
@@ -336,11 +373,10 @@ void fuse_send_forget(struct fuse_conn *fc, struct fuse_req *req,
unsigned long nodeid, u64 nlookup);
/**
- * Send READ or READDIR request
+ * Initialize READ or READDIR request
*/
-size_t fuse_send_read_common(struct fuse_req *req, struct file *file,
- struct inode *inode, loff_t pos, size_t count,
- int isdir);
+void fuse_read_fill(struct fuse_req *req, struct file *file,
+ struct inode *inode, loff_t pos, size_t count, int opcode);
/**
* Send OPEN or OPENDIR request
@@ -395,12 +431,6 @@ void fuse_init_symlink(struct inode *inode);
void fuse_change_attributes(struct inode *inode, struct fuse_attr *attr);
/**
- * Check if the connection can be released, and if yes, then free the
- * connection structure
- */
-void fuse_release_conn(struct fuse_conn *fc);
-
-/**
* Initialize the client device
*/
int fuse_dev_init(void);
@@ -456,6 +486,9 @@ void request_send_background(struct fuse_conn *fc, struct fuse_req *req);
*/
void fuse_release_background(struct fuse_req *req);
+/* Abort all requests */
+void fuse_abort_conn(struct fuse_conn *fc);
+
/**
* Get the attributes of a file
*/
@@ -465,8 +498,3 @@ int fuse_do_getattr(struct inode *inode);
* Invalidate inode attributes
*/
void fuse_invalidate_attr(struct inode *inode);
-
-/**
- * Send the INIT message
- */
-void fuse_send_init(struct fuse_conn *fc);
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 04c80cc957a3..c755a0440a66 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -24,6 +24,13 @@ MODULE_LICENSE("GPL");
spinlock_t fuse_lock;
static kmem_cache_t *fuse_inode_cachep;
+static struct subsystem connections_subsys;
+
+struct fuse_conn_attr {
+ struct attribute attr;
+ ssize_t (*show)(struct fuse_conn *, char *);
+ ssize_t (*store)(struct fuse_conn *, const char *, size_t);
+};
#define FUSE_SUPER_MAGIC 0x65735546
@@ -189,6 +196,11 @@ struct inode *fuse_iget(struct super_block *sb, unsigned long nodeid,
return inode;
}
+static void fuse_umount_begin(struct super_block *sb)
+{
+ fuse_abort_conn(get_fuse_conn_super(sb));
+}
+
static void fuse_put_super(struct super_block *sb)
{
struct fuse_conn *fc = get_fuse_conn_super(sb);
@@ -200,14 +212,13 @@ static void fuse_put_super(struct super_block *sb)
spin_lock(&fuse_lock);
fc->mounted = 0;
- fc->user_id = 0;
- fc->group_id = 0;
- fc->flags = 0;
+ fc->connected = 0;
+ spin_unlock(&fuse_lock);
+ up_write(&fc->sbput_sem);
/* Flush all readers on this fs */
wake_up_all(&fc->waitq);
- up_write(&fc->sbput_sem);
- fuse_release_conn(fc);
- spin_unlock(&fuse_lock);
+ kobject_del(&fc->kobj);
+ kobject_put(&fc->kobj);
}
static void convert_fuse_statfs(struct kstatfs *stbuf, struct fuse_kstatfs *attr)
@@ -356,8 +367,10 @@ static int fuse_show_options(struct seq_file *m, struct vfsmount *mnt)
return 0;
}
-static void free_conn(struct fuse_conn *fc)
+static void fuse_conn_release(struct kobject *kobj)
{
+ struct fuse_conn *fc = get_fuse_conn_kobj(kobj);
+
while (!list_empty(&fc->unused_list)) {
struct fuse_req *req;
req = list_entry(fc->unused_list.next, struct fuse_req, list);
@@ -367,33 +380,28 @@ static void free_conn(struct fuse_conn *fc)
kfree(fc);
}
-/* Must be called with the fuse lock held */
-void fuse_release_conn(struct fuse_conn *fc)
-{
- fc->count--;
- if (!fc->count)
- free_conn(fc);
-}
-
static struct fuse_conn *new_conn(void)
{
struct fuse_conn *fc;
- fc = kmalloc(sizeof(*fc), GFP_KERNEL);
- if (fc != NULL) {
+ fc = kzalloc(sizeof(*fc), GFP_KERNEL);
+ if (fc) {
int i;
- memset(fc, 0, sizeof(*fc));
init_waitqueue_head(&fc->waitq);
INIT_LIST_HEAD(&fc->pending);
INIT_LIST_HEAD(&fc->processing);
+ INIT_LIST_HEAD(&fc->io);
INIT_LIST_HEAD(&fc->unused_list);
INIT_LIST_HEAD(&fc->background);
- sema_init(&fc->outstanding_sem, 0);
+ sema_init(&fc->outstanding_sem, 1); /* One for INIT */
init_rwsem(&fc->sbput_sem);
+ kobj_set_kset_s(fc, connections_subsys);
+ kobject_init(&fc->kobj);
+ atomic_set(&fc->num_waiting, 0);
for (i = 0; i < FUSE_MAX_OUTSTANDING; i++) {
struct fuse_req *req = fuse_request_alloc();
if (!req) {
- free_conn(fc);
+ kobject_put(&fc->kobj);
return NULL;
}
list_add(&req->list, &fc->unused_list);
@@ -408,25 +416,32 @@ static struct fuse_conn *new_conn(void)
static struct fuse_conn *get_conn(struct file *file, struct super_block *sb)
{
struct fuse_conn *fc;
+ int err;
+ err = -EINVAL;
if (file->f_op != &fuse_dev_operations)
- return ERR_PTR(-EINVAL);
+ goto out_err;
+
+ err = -ENOMEM;
fc = new_conn();
- if (fc == NULL)
- return ERR_PTR(-ENOMEM);
+ if (!fc)
+ goto out_err;
+
spin_lock(&fuse_lock);
- if (file->private_data) {
- free_conn(fc);
- fc = ERR_PTR(-EINVAL);
- } else {
- file->private_data = fc;
- *get_fuse_conn_super_p(sb) = fc;
- fc->mounted = 1;
- fc->connected = 1;
- fc->count = 2;
- }
+ err = -EINVAL;
+ if (file->private_data)
+ goto out_unlock;
+
+ kobject_get(&fc->kobj);
+ file->private_data = fc;
spin_unlock(&fuse_lock);
return fc;
+
+ out_unlock:
+ spin_unlock(&fuse_lock);
+ kobject_put(&fc->kobj);
+ out_err:
+ return ERR_PTR(err);
}
static struct inode *get_root_inode(struct super_block *sb, unsigned mode)
@@ -445,16 +460,74 @@ static struct super_operations fuse_super_operations = {
.read_inode = fuse_read_inode,
.clear_inode = fuse_clear_inode,
.put_super = fuse_put_super,
+ .umount_begin = fuse_umount_begin,
.statfs = fuse_statfs,
.show_options = fuse_show_options,
};
+static void process_init_reply(struct fuse_conn *fc, struct fuse_req *req)
+{
+ int i;
+ struct fuse_init_out *arg = &req->misc.init_out;
+
+ if (req->out.h.error || arg->major != FUSE_KERNEL_VERSION)
+ fc->conn_error = 1;
+ else {
+ fc->minor = arg->minor;
+ fc->max_write = arg->minor < 5 ? 4096 : arg->max_write;
+ }
+
+ /* After INIT reply is received other requests can go
+ out. So do (FUSE_MAX_OUTSTANDING - 1) number of
+ up()s on outstanding_sem. The last up() is done in
+ fuse_putback_request() */
+ for (i = 1; i < FUSE_MAX_OUTSTANDING; i++)
+ up(&fc->outstanding_sem);
+
+ fuse_put_request(fc, req);
+}
+
+static void fuse_send_init(struct fuse_conn *fc)
+{
+ /* This is called from fuse_read_super() so there's guaranteed
+ to be exactly one request available */
+ struct fuse_req *req = fuse_get_request(fc);
+ struct fuse_init_in *arg = &req->misc.init_in;
+
+ arg->major = FUSE_KERNEL_VERSION;
+ arg->minor = FUSE_KERNEL_MINOR_VERSION;
+ req->in.h.opcode = FUSE_INIT;
+ req->in.numargs = 1;
+ req->in.args[0].size = sizeof(*arg);
+ req->in.args[0].value = arg;
+ req->out.numargs = 1;
+ /* Variable length arguement used for backward compatibility
+ with interface version < 7.5. Rest of init_out is zeroed
+ by do_get_request(), so a short reply is not a problem */
+ req->out.argvar = 1;
+ req->out.args[0].size = sizeof(struct fuse_init_out);
+ req->out.args[0].value = &req->misc.init_out;
+ req->end = process_init_reply;
+ request_send_background(fc, req);
+}
+
+static unsigned long long conn_id(void)
+{
+ static unsigned long long ctr = 1;
+ unsigned long long val;
+ spin_lock(&fuse_lock);
+ val = ctr++;
+ spin_unlock(&fuse_lock);
+ return val;
+}
+
static int fuse_fill_super(struct super_block *sb, void *data, int silent)
{
struct fuse_conn *fc;
struct inode *root;
struct fuse_mount_data d;
struct file *file;
+ struct dentry *root_dentry;
int err;
if (!parse_fuse_opt((char *) data, &d))
@@ -482,23 +555,42 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent)
if (fc->max_read / PAGE_CACHE_SIZE < fc->bdi.ra_pages)
fc->bdi.ra_pages = fc->max_read / PAGE_CACHE_SIZE;
+ /* Used by get_root_inode() */
+ sb->s_fs_info = fc;
+
err = -ENOMEM;
root = get_root_inode(sb, d.rootmode);
- if (root == NULL)
+ if (!root)
goto err;
- sb->s_root = d_alloc_root(root);
- if (!sb->s_root) {
+ root_dentry = d_alloc_root(root);
+ if (!root_dentry) {
iput(root);
goto err;
}
+
+ err = kobject_set_name(&fc->kobj, "%llu", conn_id());
+ if (err)
+ goto err_put_root;
+
+ err = kobject_add(&fc->kobj);
+ if (err)
+ goto err_put_root;
+
+ sb->s_root = root_dentry;
+ spin_lock(&fuse_lock);
+ fc->mounted = 1;
+ fc->connected = 1;
+ spin_unlock(&fuse_lock);
+
fuse_send_init(fc);
+
return 0;
+ err_put_root:
+ dput(root_dentry);
err:
- spin_lock(&fuse_lock);
- fuse_release_conn(fc);
- spin_unlock(&fuse_lock);
+ kobject_put(&fc->kobj);
return err;
}
@@ -516,6 +608,69 @@ static struct file_system_type fuse_fs_type = {
.kill_sb = kill_anon_super,
};
+static ssize_t fuse_conn_waiting_show(struct fuse_conn *fc, char *page)
+{
+ return sprintf(page, "%i\n", atomic_read(&fc->num_waiting));
+}
+
+static ssize_t fuse_conn_abort_store(struct fuse_conn *fc, const char *page,
+ size_t count)
+{
+ fuse_abort_conn(fc);
+ return count;
+}
+
+static struct fuse_conn_attr fuse_conn_waiting =
+ __ATTR(waiting, 0400, fuse_conn_waiting_show, NULL);
+static struct fuse_conn_attr fuse_conn_abort =
+ __ATTR(abort, 0600, NULL, fuse_conn_abort_store);
+
+static struct attribute *fuse_conn_attrs[] = {
+ &fuse_conn_waiting.attr,
+ &fuse_conn_abort.attr,
+ NULL,
+};
+
+static ssize_t fuse_conn_attr_show(struct kobject *kobj,
+ struct attribute *attr,
+ char *page)
+{
+ struct fuse_conn_attr *fca =
+ container_of(attr, struct fuse_conn_attr, attr);
+
+ if (fca->show)
+ return fca->show(get_fuse_conn_kobj(kobj), page);
+ else
+ return -EACCES;
+}
+
+static ssize_t fuse_conn_attr_store(struct kobject *kobj,
+ struct attribute *attr,
+ const char *page, size_t count)
+{
+ struct fuse_conn_attr *fca =
+ container_of(attr, struct fuse_conn_attr, attr);
+
+ if (fca->store)
+ return fca->store(get_fuse_conn_kobj(kobj), page, count);
+ else
+ return -EACCES;
+}
+
+static struct sysfs_ops fuse_conn_sysfs_ops = {
+ .show = &fuse_conn_attr_show,
+ .store = &fuse_conn_attr_store,
+};
+
+static struct kobj_type ktype_fuse_conn = {
+ .release = fuse_conn_release,
+ .sysfs_ops = &fuse_conn_sysfs_ops,
+ .default_attrs = fuse_conn_attrs,
+};
+
+static decl_subsys(fuse, NULL, NULL);
+static decl_subsys(connections, &ktype_fuse_conn, NULL);
+
static void fuse_inode_init_once(void *foo, kmem_cache_t *cachep,
unsigned long flags)
{
@@ -553,6 +708,34 @@ static void fuse_fs_cleanup(void)
kmem_cache_destroy(fuse_inode_cachep);
}
+static int fuse_sysfs_init(void)
+{
+ int err;
+
+ kset_set_kset_s(&fuse_subsys, fs_subsys);
+ err = subsystem_register(&fuse_subsys);
+ if (err)
+ goto out_err;
+
+ kset_set_kset_s(&connections_subsys, fuse_subsys);
+ err = subsystem_register(&connections_subsys);
+ if (err)
+ goto out_fuse_unregister;
+
+ return 0;
+
+ out_fuse_unregister:
+ subsystem_unregister(&fuse_subsys);
+ out_err:
+ return err;
+}
+
+static void fuse_sysfs_cleanup(void)
+{
+ subsystem_unregister(&connections_subsys);
+ subsystem_unregister(&fuse_subsys);
+}
+
static int __init fuse_init(void)
{
int res;
@@ -569,8 +752,14 @@ static int __init fuse_init(void)
if (res)
goto err_fs_cleanup;
+ res = fuse_sysfs_init();
+ if (res)
+ goto err_dev_cleanup;
+
return 0;
+ err_dev_cleanup:
+ fuse_dev_cleanup();
err_fs_cleanup:
fuse_fs_cleanup();
err:
@@ -581,6 +770,7 @@ static void __exit fuse_exit(void)
{
printk(KERN_DEBUG "fuse exit\n");
+ fuse_sysfs_cleanup();
fuse_fs_cleanup();
fuse_dev_cleanup();
}
diff --git a/fs/namespace.c b/fs/namespace.c
index 8bc15b362d23..ce97becff461 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -48,6 +48,10 @@ static int hash_mask __read_mostly, hash_bits __read_mostly;
static kmem_cache_t *mnt_cache;
static struct rw_semaphore namespace_sem;
+/* /sys/fs */
+decl_subsys(fs, NULL, NULL);
+EXPORT_SYMBOL_GPL(fs_subsys);
+
static inline unsigned long hash(struct vfsmount *mnt, struct dentry *dentry)
{
unsigned long tmp = ((unsigned long)mnt / L1_CACHE_BYTES);
@@ -1725,6 +1729,7 @@ void __init mnt_init(unsigned long mempages)
i--;
} while (i);
sysfs_init();
+ subsystem_register(&fs_subsys);
init_rootfs();
init_mount_tree();
}
diff --git a/fs/partitions/Kconfig b/fs/partitions/Kconfig
index 7490cc9208b3..c9a478099281 100644
--- a/fs/partitions/Kconfig
+++ b/fs/partitions/Kconfig
@@ -222,6 +222,13 @@ config SUN_PARTITION
given by the tar program ("man tar" or preferably "info tar"). If
you don't know what all this is about, say N.
+config KARMA_PARTITION
+ bool "Karma Partition support"
+ depends on PARTITION_ADVANCED
+ help
+ Say Y here if you would like to mount the Rio Karma MP3 player, as it
+ uses a proprietary partition table.
+
config EFI_PARTITION
bool "EFI GUID Partition support"
depends on PARTITION_ADVANCED
diff --git a/fs/partitions/Makefile b/fs/partitions/Makefile
index 66d5cc26fafb..42c7d3878ed0 100644
--- a/fs/partitions/Makefile
+++ b/fs/partitions/Makefile
@@ -17,3 +17,4 @@ obj-$(CONFIG_SUN_PARTITION) += sun.o
obj-$(CONFIG_ULTRIX_PARTITION) += ultrix.o
obj-$(CONFIG_IBM_PARTITION) += ibm.o
obj-$(CONFIG_EFI_PARTITION) += efi.o
+obj-$(CONFIG_KARMA_PARTITION) += karma.o
diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index 7881ce05daef..f924f459bdb8 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -35,6 +35,7 @@
#include "ibm.h"
#include "ultrix.h"
#include "efi.h"
+#include "karma.h"
#ifdef CONFIG_BLK_DEV_MD
extern void md_autodetect_dev(dev_t dev);
@@ -103,6 +104,9 @@ static int (*check_part[])(struct parsed_partitions *, struct block_device *) =
#ifdef CONFIG_IBM_PARTITION
ibm_partition,
#endif
+#ifdef CONFIG_KARMA_PARTITION
+ karma_partition,
+#endif
NULL
};
diff --git a/fs/partitions/karma.c b/fs/partitions/karma.c
new file mode 100644
index 000000000000..176d89bcf123
--- /dev/null
+++ b/fs/partitions/karma.c
@@ -0,0 +1,57 @@
+/*
+ * fs/partitions/karma.c
+ * Rio Karma partition info.
+ *
+ * Copyright (C) 2006 Bob Copeland (me@bobcopeland.com)
+ * based on osf.c
+ */
+
+#include "check.h"
+#include "karma.h"
+
+int karma_partition(struct parsed_partitions *state, struct block_device *bdev)
+{
+ int i;
+ int slot = 1;
+ Sector sect;
+ unsigned char *data;
+ struct disklabel {
+ u8 d_reserved[270];
+ struct d_partition {
+ __le32 p_res;
+ u8 p_fstype;
+ u8 p_res2[3];
+ __le32 p_offset;
+ __le32 p_size;
+ } d_partitions[2];
+ u8 d_blank[208];
+ __le16 d_magic;
+ } __attribute__((packed)) *label;
+ struct d_partition *p;
+
+ data = read_dev_sector(bdev, 0, &sect);
+ if (!data)
+ return -1;
+
+ label = (struct disklabel *)data;
+ if (le16_to_cpu(label->d_magic) != KARMA_LABEL_MAGIC) {
+ put_dev_sector(sect);
+ return 0;
+ }
+
+ p = label->d_partitions;
+ for (i = 0 ; i < 2; i++, p++) {
+ if (slot == state->limit)
+ break;
+
+ if (p->p_fstype == 0x4d && le32_to_cpu(p->p_size)) {
+ put_partition(state, slot, le32_to_cpu(p->p_offset),
+ le32_to_cpu(p->p_size));
+ }
+ slot++;
+ }
+ printk("\n");
+ put_dev_sector(sect);
+ return 1;
+}
+
diff --git a/fs/partitions/karma.h b/fs/partitions/karma.h
new file mode 100644
index 000000000000..ecf7d3f2a3d8
--- /dev/null
+++ b/fs/partitions/karma.h
@@ -0,0 +1,8 @@
+/*
+ * fs/partitions/karma.h
+ */
+
+#define KARMA_LABEL_MAGIC 0xAB56
+
+int karma_partition(struct parsed_partitions *state, struct block_device *bdev);
+
diff --git a/include/asm-arm26/cache.h b/include/asm-arm26/cache.h
index f52ca1b808cd..8c3abcf728fe 100644
--- a/include/asm-arm26/cache.h
+++ b/include/asm-arm26/cache.h
@@ -4,7 +4,8 @@
#ifndef __ASMARM_CACHE_H
#define __ASMARM_CACHE_H
-#define L1_CACHE_BYTES 32
+#define L1_CACHE_SHIFT 5
+#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
#define L1_CACHE_ALIGN(x) (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
#define SMP_CACHE_BYTES L1_CACHE_BYTES
diff --git a/include/asm-arm26/thread_info.h b/include/asm-arm26/thread_info.h
index a65e58a0a767..9b367ebe515d 100644
--- a/include/asm-arm26/thread_info.h
+++ b/include/asm-arm26/thread_info.h
@@ -80,8 +80,7 @@ static inline struct thread_info *current_thread_info(void)
return (struct thread_info *)(sp & ~0x1fff);
}
-/* FIXME - PAGE_SIZE < 32K */
-#define THREAD_SIZE (8*32768) // FIXME - this needs attention (see kernel/fork.c which gets a nice div by zero if this is lower than 8*32768
+#define THREAD_SIZE PAGE_SIZE
#define task_pt_regs(task) ((struct pt_regs *)(task_stack_page(task) + THREAD_SIZE - 8) - 1)
extern struct thread_info *alloc_thread_info(struct task_struct *task);
diff --git a/include/asm-ia64/pal.h b/include/asm-ia64/pal.h
index e828377ad295..7708ec669a33 100644
--- a/include/asm-ia64/pal.h
+++ b/include/asm-ia64/pal.h
@@ -927,7 +927,7 @@ static inline s64
ia64_pal_cache_flush (u64 cache_type, u64 invalidate, u64 *progress, u64 *vector)
{
struct ia64_pal_retval iprv;
- PAL_CALL_IC_OFF(iprv, PAL_CACHE_FLUSH, cache_type, invalidate, *progress);
+ PAL_CALL(iprv, PAL_CACHE_FLUSH, cache_type, invalidate, *progress);
if (vector)
*vector = iprv.v0;
*progress = iprv.v1;
diff --git a/include/asm-ia64/processor.h b/include/asm-ia64/processor.h
index 8c648bf72bbd..09b99029ac1a 100644
--- a/include/asm-ia64/processor.h
+++ b/include/asm-ia64/processor.h
@@ -25,8 +25,8 @@
* Limits for PMC and PMD are set to less than maximum architected values
* but should be sufficient for a while
*/
-#define IA64_NUM_PMC_REGS 32
-#define IA64_NUM_PMD_REGS 32
+#define IA64_NUM_PMC_REGS 64
+#define IA64_NUM_PMD_REGS 64
#define DEFAULT_MAP_BASE __IA64_UL_CONST(0x2000000000000000)
#define DEFAULT_TASK_SIZE __IA64_UL_CONST(0xa000000000000000)
diff --git a/include/asm-ia64/sn/intr.h b/include/asm-ia64/sn/intr.h
index e35074f526d9..a3431372c6e7 100644
--- a/include/asm-ia64/sn/intr.h
+++ b/include/asm-ia64/sn/intr.h
@@ -40,7 +40,7 @@ struct sn_irq_info {
int irq_cpuid; /* kernel logical cpuid */
int irq_irq; /* the IRQ number */
int irq_int_bit; /* Bridge interrupt pin */
- uint64_t irq_xtalkaddr; /* xtalkaddr IRQ is sent to */
+ u64 irq_xtalkaddr; /* xtalkaddr IRQ is sent to */
int irq_bridge_type;/* pciio asic type (pciio.h) */
void *irq_bridge; /* bridge generating irq */
void *irq_pciioinfo; /* associated pciio_info_t */
diff --git a/include/asm-ia64/sn/pcibr_provider.h b/include/asm-ia64/sn/pcibr_provider.h
index 2b42d9ece26b..9334078b089a 100644
--- a/include/asm-ia64/sn/pcibr_provider.h
+++ b/include/asm-ia64/sn/pcibr_provider.h
@@ -44,9 +44,9 @@
#define PCI32_MAPPED_BASE 0x40000000
#define PCI32_DIRECT_BASE 0x80000000
-#define IS_PCI32_MAPPED(x) ((uint64_t)(x) < PCI32_DIRECT_BASE && \
- (uint64_t)(x) >= PCI32_MAPPED_BASE)
-#define IS_PCI32_DIRECT(x) ((uint64_t)(x) >= PCI32_MAPPED_BASE)
+#define IS_PCI32_MAPPED(x) ((u64)(x) < PCI32_DIRECT_BASE && \
+ (u64)(x) >= PCI32_MAPPED_BASE)
+#define IS_PCI32_DIRECT(x) ((u64)(x) >= PCI32_MAPPED_BASE)
/*
@@ -63,7 +63,7 @@
(IOPG(IOPGOFF(addr) + (size) - 1) == IOPG((size) - 1))
#define MINIMAL_ATE_FLAG(addr, size) \
- (MINIMAL_ATES_REQUIRED((uint64_t)addr, size) ? 1 : 0)
+ (MINIMAL_ATES_REQUIRED((u64)addr, size) ? 1 : 0)
/* bit 29 of the pci address is the SWAP bit */
#define ATE_SWAPSHIFT 29
@@ -90,27 +90,27 @@
* PMU resources.
*/
struct ate_resource{
- uint64_t *ate;
- uint64_t num_ate;
- uint64_t lowest_free_index;
+ u64 *ate;
+ u64 num_ate;
+ u64 lowest_free_index;
};
struct pcibus_info {
struct pcibus_bussoft pbi_buscommon; /* common header */
- uint32_t pbi_moduleid;
+ u32 pbi_moduleid;
short pbi_bridge_type;
short pbi_bridge_mode;
struct ate_resource pbi_int_ate_resource;
- uint64_t pbi_int_ate_size;
+ u64 pbi_int_ate_size;
- uint64_t pbi_dir_xbase;
+ u64 pbi_dir_xbase;
char pbi_hub_xid;
- uint64_t pbi_devreg[8];
+ u64 pbi_devreg[8];
- uint32_t pbi_valid_devices;
- uint32_t pbi_enabled_devices;
+ u32 pbi_valid_devices;
+ u32 pbi_enabled_devices;
spinlock_t pbi_lock;
};
@@ -136,22 +136,22 @@ extern void pcibr_dma_unmap(struct pci_dev *, dma_addr_t, int);
/*
* prototypes for the bridge asic register access routines in pcibr_reg.c
*/
-extern void pcireg_control_bit_clr(struct pcibus_info *, uint64_t);
-extern void pcireg_control_bit_set(struct pcibus_info *, uint64_t);
-extern uint64_t pcireg_tflush_get(struct pcibus_info *);
-extern uint64_t pcireg_intr_status_get(struct pcibus_info *);
-extern void pcireg_intr_enable_bit_clr(struct pcibus_info *, uint64_t);
-extern void pcireg_intr_enable_bit_set(struct pcibus_info *, uint64_t);
-extern void pcireg_intr_addr_addr_set(struct pcibus_info *, int, uint64_t);
+extern void pcireg_control_bit_clr(struct pcibus_info *, u64);
+extern void pcireg_control_bit_set(struct pcibus_info *, u64);
+extern u64 pcireg_tflush_get(struct pcibus_info *);
+extern u64 pcireg_intr_status_get(struct pcibus_info *);
+extern void pcireg_intr_enable_bit_clr(struct pcibus_info *, u64);
+extern void pcireg_intr_enable_bit_set(struct pcibus_info *, u64);
+extern void pcireg_intr_addr_addr_set(struct pcibus_info *, int, u64);
extern void pcireg_force_intr_set(struct pcibus_info *, int);
-extern uint64_t pcireg_wrb_flush_get(struct pcibus_info *, int);
-extern void pcireg_int_ate_set(struct pcibus_info *, int, uint64_t);
-extern uint64_t * pcireg_int_ate_addr(struct pcibus_info *, int);
+extern u64 pcireg_wrb_flush_get(struct pcibus_info *, int);
+extern void pcireg_int_ate_set(struct pcibus_info *, int, u64);
+extern u64 * pcireg_int_ate_addr(struct pcibus_info *, int);
extern void pcibr_force_interrupt(struct sn_irq_info *sn_irq_info);
extern void pcibr_change_devices_irq(struct sn_irq_info *sn_irq_info);
extern int pcibr_ate_alloc(struct pcibus_info *, int);
extern void pcibr_ate_free(struct pcibus_info *, int);
-extern void ate_write(struct pcibus_info *, int, int, uint64_t);
+extern void ate_write(struct pcibus_info *, int, int, u64);
extern int sal_pcibr_slot_enable(struct pcibus_info *soft, int device,
void *resp);
extern int sal_pcibr_slot_disable(struct pcibus_info *soft, int device,
diff --git a/include/asm-ia64/sn/pcibus_provider_defs.h b/include/asm-ia64/sn/pcibus_provider_defs.h
index ad0e8e8ae53f..ce3f6c328241 100644
--- a/include/asm-ia64/sn/pcibus_provider_defs.h
+++ b/include/asm-ia64/sn/pcibus_provider_defs.h
@@ -29,13 +29,13 @@
*/
struct pcibus_bussoft {
- uint32_t bs_asic_type; /* chipset type */
- uint32_t bs_xid; /* xwidget id */
- uint32_t bs_persist_busnum; /* Persistent Bus Number */
- uint32_t bs_persist_segment; /* Segment Number */
- uint64_t bs_legacy_io; /* legacy io pio addr */
- uint64_t bs_legacy_mem; /* legacy mem pio addr */
- uint64_t bs_base; /* widget base */
+ u32 bs_asic_type; /* chipset type */
+ u32 bs_xid; /* xwidget id */
+ u32 bs_persist_busnum; /* Persistent Bus Number */
+ u32 bs_persist_segment; /* Segment Number */
+ u64 bs_legacy_io; /* legacy io pio addr */
+ u64 bs_legacy_mem; /* legacy mem pio addr */
+ u64 bs_base; /* widget base */
struct xwidget_info *bs_xwidget_info;
};
diff --git a/include/asm-ia64/sn/pcidev.h b/include/asm-ia64/sn/pcidev.h
index f65d222ca5e8..38cdffbc4c7b 100644
--- a/include/asm-ia64/sn/pcidev.h
+++ b/include/asm-ia64/sn/pcidev.h
@@ -55,8 +55,8 @@ struct sn_pci_controller {
#define PCIIO_VENDOR_ID_NONE (-1)
struct pcidev_info {
- uint64_t pdi_pio_mapped_addr[7]; /* 6 BARs PLUS 1 ROM */
- uint64_t pdi_slot_host_handle; /* Bus and devfn Host pci_dev */
+ u64 pdi_pio_mapped_addr[7]; /* 6 BARs PLUS 1 ROM */
+ u64 pdi_slot_host_handle; /* Bus and devfn Host pci_dev */
struct pcibus_bussoft *pdi_pcibus_info; /* Kernel common bus soft */
struct pcidev_info *pdi_host_pcidev_info; /* Kernel Host pci_dev */
diff --git a/include/asm-ia64/sn/pic.h b/include/asm-ia64/sn/pic.h
index 0de82e6b0893..5f9da5fd6e56 100644
--- a/include/asm-ia64/sn/pic.h
+++ b/include/asm-ia64/sn/pic.h
@@ -74,120 +74,120 @@ struct pic {
/* 0x000000-0x00FFFF -- Local Registers */
/* 0x000000-0x000057 -- Standard Widget Configuration */
- uint64_t p_wid_id; /* 0x000000 */
- uint64_t p_wid_stat; /* 0x000008 */
- uint64_t p_wid_err_upper; /* 0x000010 */
- uint64_t p_wid_err_lower; /* 0x000018 */
+ u64 p_wid_id; /* 0x000000 */
+ u64 p_wid_stat; /* 0x000008 */
+ u64 p_wid_err_upper; /* 0x000010 */
+ u64 p_wid_err_lower; /* 0x000018 */
#define p_wid_err p_wid_err_lower
- uint64_t p_wid_control; /* 0x000020 */
- uint64_t p_wid_req_timeout; /* 0x000028 */
- uint64_t p_wid_int_upper; /* 0x000030 */
- uint64_t p_wid_int_lower; /* 0x000038 */
+ u64 p_wid_control; /* 0x000020 */
+ u64 p_wid_req_timeout; /* 0x000028 */
+ u64 p_wid_int_upper; /* 0x000030 */
+ u64 p_wid_int_lower; /* 0x000038 */
#define p_wid_int p_wid_int_lower
- uint64_t p_wid_err_cmdword; /* 0x000040 */
- uint64_t p_wid_llp; /* 0x000048 */
- uint64_t p_wid_tflush; /* 0x000050 */
+ u64 p_wid_err_cmdword; /* 0x000040 */
+ u64 p_wid_llp; /* 0x000048 */
+ u64 p_wid_tflush; /* 0x000050 */
/* 0x000058-0x00007F -- Bridge-specific Widget Configuration */
- uint64_t p_wid_aux_err; /* 0x000058 */
- uint64_t p_wid_resp_upper; /* 0x000060 */
- uint64_t p_wid_resp_lower; /* 0x000068 */
+ u64 p_wid_aux_err; /* 0x000058 */
+ u64 p_wid_resp_upper; /* 0x000060 */
+ u64 p_wid_resp_lower; /* 0x000068 */
#define p_wid_resp p_wid_resp_lower
- uint64_t p_wid_tst_pin_ctrl; /* 0x000070 */
- uint64_t p_wid_addr_lkerr; /* 0x000078 */
+ u64 p_wid_tst_pin_ctrl; /* 0x000070 */
+ u64 p_wid_addr_lkerr; /* 0x000078 */
/* 0x000080-0x00008F -- PMU & MAP */
- uint64_t p_dir_map; /* 0x000080 */
- uint64_t _pad_000088; /* 0x000088 */
+ u64 p_dir_map; /* 0x000080 */
+ u64 _pad_000088; /* 0x000088 */
/* 0x000090-0x00009F -- SSRAM */
- uint64_t p_map_fault; /* 0x000090 */
- uint64_t _pad_000098; /* 0x000098 */
+ u64 p_map_fault; /* 0x000090 */
+ u64 _pad_000098; /* 0x000098 */
/* 0x0000A0-0x0000AF -- Arbitration */
- uint64_t p_arb; /* 0x0000A0 */
- uint64_t _pad_0000A8; /* 0x0000A8 */
+ u64 p_arb; /* 0x0000A0 */
+ u64 _pad_0000A8; /* 0x0000A8 */
/* 0x0000B0-0x0000BF -- Number In A Can or ATE Parity Error */
- uint64_t p_ate_parity_err; /* 0x0000B0 */
- uint64_t _pad_0000B8; /* 0x0000B8 */
+ u64 p_ate_parity_err; /* 0x0000B0 */
+ u64 _pad_0000B8; /* 0x0000B8 */
/* 0x0000C0-0x0000FF -- PCI/GIO */
- uint64_t p_bus_timeout; /* 0x0000C0 */
- uint64_t p_pci_cfg; /* 0x0000C8 */
- uint64_t p_pci_err_upper; /* 0x0000D0 */
- uint64_t p_pci_err_lower; /* 0x0000D8 */
+ u64 p_bus_timeout; /* 0x0000C0 */
+ u64 p_pci_cfg; /* 0x0000C8 */
+ u64 p_pci_err_upper; /* 0x0000D0 */
+ u64 p_pci_err_lower; /* 0x0000D8 */
#define p_pci_err p_pci_err_lower
- uint64_t _pad_0000E0[4]; /* 0x0000{E0..F8} */
+ u64 _pad_0000E0[4]; /* 0x0000{E0..F8} */
/* 0x000100-0x0001FF -- Interrupt */
- uint64_t p_int_status; /* 0x000100 */
- uint64_t p_int_enable; /* 0x000108 */
- uint64_t p_int_rst_stat; /* 0x000110 */
- uint64_t p_int_mode; /* 0x000118 */
- uint64_t p_int_device; /* 0x000120 */
- uint64_t p_int_host_err; /* 0x000128 */
- uint64_t p_int_addr[8]; /* 0x0001{30,,,68} */
- uint64_t p_err_int_view; /* 0x000170 */
- uint64_t p_mult_int; /* 0x000178 */
- uint64_t p_force_always[8]; /* 0x0001{80,,,B8} */
- uint64_t p_force_pin[8]; /* 0x0001{C0,,,F8} */
+ u64 p_int_status; /* 0x000100 */
+ u64 p_int_enable; /* 0x000108 */
+ u64 p_int_rst_stat; /* 0x000110 */
+ u64 p_int_mode; /* 0x000118 */
+ u64 p_int_device; /* 0x000120 */
+ u64 p_int_host_err; /* 0x000128 */
+ u64 p_int_addr[8]; /* 0x0001{30,,,68} */
+ u64 p_err_int_view; /* 0x000170 */
+ u64 p_mult_int; /* 0x000178 */
+ u64 p_force_always[8]; /* 0x0001{80,,,B8} */
+ u64 p_force_pin[8]; /* 0x0001{C0,,,F8} */
/* 0x000200-0x000298 -- Device */
- uint64_t p_device[4]; /* 0x0002{00,,,18} */
- uint64_t _pad_000220[4]; /* 0x0002{20,,,38} */
- uint64_t p_wr_req_buf[4]; /* 0x0002{40,,,58} */
- uint64_t _pad_000260[4]; /* 0x0002{60,,,78} */
- uint64_t p_rrb_map[2]; /* 0x0002{80,,,88} */
+ u64 p_device[4]; /* 0x0002{00,,,18} */
+ u64 _pad_000220[4]; /* 0x0002{20,,,38} */
+ u64 p_wr_req_buf[4]; /* 0x0002{40,,,58} */
+ u64 _pad_000260[4]; /* 0x0002{60,,,78} */
+ u64 p_rrb_map[2]; /* 0x0002{80,,,88} */
#define p_even_resp p_rrb_map[0] /* 0x000280 */
#define p_odd_resp p_rrb_map[1] /* 0x000288 */
- uint64_t p_resp_status; /* 0x000290 */
- uint64_t p_resp_clear; /* 0x000298 */
+ u64 p_resp_status; /* 0x000290 */
+ u64 p_resp_clear; /* 0x000298 */
- uint64_t _pad_0002A0[12]; /* 0x0002{A0..F8} */
+ u64 _pad_0002A0[12]; /* 0x0002{A0..F8} */
/* 0x000300-0x0003F8 -- Buffer Address Match Registers */
struct {
- uint64_t upper; /* 0x0003{00,,,F0} */
- uint64_t lower; /* 0x0003{08,,,F8} */
+ u64 upper; /* 0x0003{00,,,F0} */
+ u64 lower; /* 0x0003{08,,,F8} */
} p_buf_addr_match[16];
/* 0x000400-0x0005FF -- Performance Monitor Registers (even only) */
struct {
- uint64_t flush_w_touch; /* 0x000{400,,,5C0} */
- uint64_t flush_wo_touch; /* 0x000{408,,,5C8} */
- uint64_t inflight; /* 0x000{410,,,5D0} */
- uint64_t prefetch; /* 0x000{418,,,5D8} */
- uint64_t total_pci_retry; /* 0x000{420,,,5E0} */
- uint64_t max_pci_retry; /* 0x000{428,,,5E8} */
- uint64_t max_latency; /* 0x000{430,,,5F0} */
- uint64_t clear_all; /* 0x000{438,,,5F8} */
+ u64 flush_w_touch; /* 0x000{400,,,5C0} */
+ u64 flush_wo_touch; /* 0x000{408,,,5C8} */
+ u64 inflight; /* 0x000{410,,,5D0} */
+ u64 prefetch; /* 0x000{418,,,5D8} */
+ u64 total_pci_retry; /* 0x000{420,,,5E0} */
+ u64 max_pci_retry; /* 0x000{428,,,5E8} */
+ u64 max_latency; /* 0x000{430,,,5F0} */
+ u64 clear_all; /* 0x000{438,,,5F8} */
} p_buf_count[8];
/* 0x000600-0x0009FF -- PCI/X registers */
- uint64_t p_pcix_bus_err_addr; /* 0x000600 */
- uint64_t p_pcix_bus_err_attr; /* 0x000608 */
- uint64_t p_pcix_bus_err_data; /* 0x000610 */
- uint64_t p_pcix_pio_split_addr; /* 0x000618 */
- uint64_t p_pcix_pio_split_attr; /* 0x000620 */
- uint64_t p_pcix_dma_req_err_attr; /* 0x000628 */
- uint64_t p_pcix_dma_req_err_addr; /* 0x000630 */
- uint64_t p_pcix_timeout; /* 0x000638 */
+ u64 p_pcix_bus_err_addr; /* 0x000600 */
+ u64 p_pcix_bus_err_attr; /* 0x000608 */
+ u64 p_pcix_bus_err_data; /* 0x000610 */
+ u64 p_pcix_pio_split_addr; /* 0x000618 */
+ u64 p_pcix_pio_split_attr; /* 0x000620 */
+ u64 p_pcix_dma_req_err_attr; /* 0x000628 */
+ u64 p_pcix_dma_req_err_addr; /* 0x000630 */
+ u64 p_pcix_timeout; /* 0x000638 */
- uint64_t _pad_000640[120]; /* 0x000{640,,,9F8} */
+ u64 _pad_000640[120]; /* 0x000{640,,,9F8} */
/* 0x000A00-0x000BFF -- PCI/X Read&Write Buffer */
struct {
- uint64_t p_buf_addr; /* 0x000{A00,,,AF0} */
- uint64_t p_buf_attr; /* 0X000{A08,,,AF8} */
+ u64 p_buf_addr; /* 0x000{A00,,,AF0} */
+ u64 p_buf_attr; /* 0X000{A08,,,AF8} */
} p_pcix_read_buf_64[16];
struct {
- uint64_t p_buf_addr; /* 0x000{B00,,,BE0} */
- uint64_t p_buf_attr; /* 0x000{B08,,,BE8} */
- uint64_t p_buf_valid; /* 0x000{B10,,,BF0} */
- uint64_t __pad1; /* 0x000{B18,,,BF8} */
+ u64 p_buf_addr; /* 0x000{B00,,,BE0} */
+ u64 p_buf_attr; /* 0x000{B08,,,BE8} */
+ u64 p_buf_valid; /* 0x000{B10,,,BF0} */
+ u64 __pad1; /* 0x000{B18,,,BF8} */
} p_pcix_write_buf_64[8];
/* End of Local Registers -- Start of Address Map space */
@@ -195,45 +195,45 @@ struct pic {
char _pad_000c00[0x010000 - 0x000c00];
/* 0x010000-0x011fff -- Internal ATE RAM (Auto Parity Generation) */
- uint64_t p_int_ate_ram[1024]; /* 0x010000-0x011fff */
+ u64 p_int_ate_ram[1024]; /* 0x010000-0x011fff */
/* 0x012000-0x013fff -- Internal ATE RAM (Manual Parity Generation) */
- uint64_t p_int_ate_ram_mp[1024]; /* 0x012000-0x013fff */
+ u64 p_int_ate_ram_mp[1024]; /* 0x012000-0x013fff */
char _pad_014000[0x18000 - 0x014000];
/* 0x18000-0x197F8 -- PIC Write Request Ram */
- uint64_t p_wr_req_lower[256]; /* 0x18000 - 0x187F8 */
- uint64_t p_wr_req_upper[256]; /* 0x18800 - 0x18FF8 */
- uint64_t p_wr_req_parity[256]; /* 0x19000 - 0x197F8 */
+ u64 p_wr_req_lower[256]; /* 0x18000 - 0x187F8 */
+ u64 p_wr_req_upper[256]; /* 0x18800 - 0x18FF8 */
+ u64 p_wr_req_parity[256]; /* 0x19000 - 0x197F8 */
char _pad_019800[0x20000 - 0x019800];
/* 0x020000-0x027FFF -- PCI Device Configuration Spaces */
union {
- uint8_t c[0x1000 / 1]; /* 0x02{0000,,,7FFF} */
- uint16_t s[0x1000 / 2]; /* 0x02{0000,,,7FFF} */
- uint32_t l[0x1000 / 4]; /* 0x02{0000,,,7FFF} */
- uint64_t d[0x1000 / 8]; /* 0x02{0000,,,7FFF} */
+ u8 c[0x1000 / 1]; /* 0x02{0000,,,7FFF} */
+ u16 s[0x1000 / 2]; /* 0x02{0000,,,7FFF} */
+ u32 l[0x1000 / 4]; /* 0x02{0000,,,7FFF} */
+ u64 d[0x1000 / 8]; /* 0x02{0000,,,7FFF} */
union {
- uint8_t c[0x100 / 1];
- uint16_t s[0x100 / 2];
- uint32_t l[0x100 / 4];
- uint64_t d[0x100 / 8];
+ u8 c[0x100 / 1];
+ u16 s[0x100 / 2];
+ u32 l[0x100 / 4];
+ u64 d[0x100 / 8];
} f[8];
} p_type0_cfg_dev[8]; /* 0x02{0000,,,7FFF} */
/* 0x028000-0x028FFF -- PCI Type 1 Configuration Space */
union {
- uint8_t c[0x1000 / 1]; /* 0x028000-0x029000 */
- uint16_t s[0x1000 / 2]; /* 0x028000-0x029000 */
- uint32_t l[0x1000 / 4]; /* 0x028000-0x029000 */
- uint64_t d[0x1000 / 8]; /* 0x028000-0x029000 */
+ u8 c[0x1000 / 1]; /* 0x028000-0x029000 */
+ u16 s[0x1000 / 2]; /* 0x028000-0x029000 */
+ u32 l[0x1000 / 4]; /* 0x028000-0x029000 */
+ u64 d[0x1000 / 8]; /* 0x028000-0x029000 */
union {
- uint8_t c[0x100 / 1];
- uint16_t s[0x100 / 2];
- uint32_t l[0x100 / 4];
- uint64_t d[0x100 / 8];
+ u8 c[0x100 / 1];
+ u16 s[0x100 / 2];
+ u32 l[0x100 / 4];
+ u64 d[0x100 / 8];
} f[8];
} p_type1_cfg; /* 0x028000-0x029000 */
@@ -241,20 +241,20 @@ struct pic {
/* 0x030000-0x030007 -- PCI Interrupt Acknowledge Cycle */
union {
- uint8_t c[8 / 1];
- uint16_t s[8 / 2];
- uint32_t l[8 / 4];
- uint64_t d[8 / 8];
+ u8 c[8 / 1];
+ u16 s[8 / 2];
+ u32 l[8 / 4];
+ u64 d[8 / 8];
} p_pci_iack; /* 0x030000-0x030007 */
char _pad_030007[0x040000-0x030008];
/* 0x040000-0x030007 -- PCIX Special Cycle */
union {
- uint8_t c[8 / 1];
- uint16_t s[8 / 2];
- uint32_t l[8 / 4];
- uint64_t d[8 / 8];
+ u8 c[8 / 1];
+ u16 s[8 / 2];
+ u32 l[8 / 4];
+ u64 d[8 / 8];
} p_pcix_cycle; /* 0x040000-0x040007 */
};
diff --git a/include/asm-ia64/sn/shubio.h b/include/asm-ia64/sn/shubio.h
index 831b72111fdc..22a6f18a5313 100644
--- a/include/asm-ia64/sn/shubio.h
+++ b/include/asm-ia64/sn/shubio.h
@@ -227,13 +227,13 @@
************************************************************************/
typedef union ii_wid_u {
- uint64_t ii_wid_regval;
+ u64 ii_wid_regval;
struct {
- uint64_t w_rsvd_1:1;
- uint64_t w_mfg_num:11;
- uint64_t w_part_num:16;
- uint64_t w_rev_num:4;
- uint64_t w_rsvd:32;
+ u64 w_rsvd_1:1;
+ u64 w_mfg_num:11;
+ u64 w_part_num:16;
+ u64 w_rev_num:4;
+ u64 w_rsvd:32;
} ii_wid_fld_s;
} ii_wid_u_t;
@@ -246,18 +246,18 @@ typedef union ii_wid_u {
************************************************************************/
typedef union ii_wstat_u {
- uint64_t ii_wstat_regval;
- struct {
- uint64_t w_pending:4;
- uint64_t w_xt_crd_to:1;
- uint64_t w_xt_tail_to:1;
- uint64_t w_rsvd_3:3;
- uint64_t w_tx_mx_rty:1;
- uint64_t w_rsvd_2:6;
- uint64_t w_llp_tx_cnt:8;
- uint64_t w_rsvd_1:8;
- uint64_t w_crazy:1;
- uint64_t w_rsvd:31;
+ u64 ii_wstat_regval;
+ struct {
+ u64 w_pending:4;
+ u64 w_xt_crd_to:1;
+ u64 w_xt_tail_to:1;
+ u64 w_rsvd_3:3;
+ u64 w_tx_mx_rty:1;
+ u64 w_rsvd_2:6;
+ u64 w_llp_tx_cnt:8;
+ u64 w_rsvd_1:8;
+ u64 w_crazy:1;
+ u64 w_rsvd:31;
} ii_wstat_fld_s;
} ii_wstat_u_t;
@@ -269,16 +269,16 @@ typedef union ii_wstat_u {
************************************************************************/
typedef union ii_wcr_u {
- uint64_t ii_wcr_regval;
- struct {
- uint64_t w_wid:4;
- uint64_t w_tag:1;
- uint64_t w_rsvd_1:8;
- uint64_t w_dst_crd:3;
- uint64_t w_f_bad_pkt:1;
- uint64_t w_dir_con:1;
- uint64_t w_e_thresh:5;
- uint64_t w_rsvd:41;
+ u64 ii_wcr_regval;
+ struct {
+ u64 w_wid:4;
+ u64 w_tag:1;
+ u64 w_rsvd_1:8;
+ u64 w_dst_crd:3;
+ u64 w_f_bad_pkt:1;
+ u64 w_dir_con:1;
+ u64 w_e_thresh:5;
+ u64 w_rsvd:41;
} ii_wcr_fld_s;
} ii_wcr_u_t;
@@ -310,9 +310,9 @@ typedef union ii_wcr_u {
************************************************************************/
typedef union ii_ilapr_u {
- uint64_t ii_ilapr_regval;
+ u64 ii_ilapr_regval;
struct {
- uint64_t i_region:64;
+ u64 i_region:64;
} ii_ilapr_fld_s;
} ii_ilapr_u_t;
@@ -330,9 +330,9 @@ typedef union ii_ilapr_u {
************************************************************************/
typedef union ii_ilapo_u {
- uint64_t ii_ilapo_regval;
+ u64 ii_ilapo_regval;
struct {
- uint64_t i_io_ovrride:64;
+ u64 i_io_ovrride:64;
} ii_ilapo_fld_s;
} ii_ilapo_u_t;
@@ -344,12 +344,12 @@ typedef union ii_ilapo_u {
************************************************************************/
typedef union ii_iowa_u {
- uint64_t ii_iowa_regval;
+ u64 ii_iowa_regval;
struct {
- uint64_t i_w0_oac:1;
- uint64_t i_rsvd_1:7;
- uint64_t i_wx_oac:8;
- uint64_t i_rsvd:48;
+ u64 i_w0_oac:1;
+ u64 i_rsvd_1:7;
+ u64 i_wx_oac:8;
+ u64 i_rsvd:48;
} ii_iowa_fld_s;
} ii_iowa_u_t;
@@ -363,12 +363,12 @@ typedef union ii_iowa_u {
************************************************************************/
typedef union ii_iiwa_u {
- uint64_t ii_iiwa_regval;
+ u64 ii_iiwa_regval;
struct {
- uint64_t i_w0_iac:1;
- uint64_t i_rsvd_1:7;
- uint64_t i_wx_iac:8;
- uint64_t i_rsvd:48;
+ u64 i_w0_iac:1;
+ u64 i_rsvd_1:7;
+ u64 i_wx_iac:8;
+ u64 i_rsvd:48;
} ii_iiwa_fld_s;
} ii_iiwa_u_t;
@@ -392,16 +392,16 @@ typedef union ii_iiwa_u {
************************************************************************/
typedef union ii_iidem_u {
- uint64_t ii_iidem_regval;
- struct {
- uint64_t i_w8_dxs:8;
- uint64_t i_w9_dxs:8;
- uint64_t i_wa_dxs:8;
- uint64_t i_wb_dxs:8;
- uint64_t i_wc_dxs:8;
- uint64_t i_wd_dxs:8;
- uint64_t i_we_dxs:8;
- uint64_t i_wf_dxs:8;
+ u64 ii_iidem_regval;
+ struct {
+ u64 i_w8_dxs:8;
+ u64 i_w9_dxs:8;
+ u64 i_wa_dxs:8;
+ u64 i_wb_dxs:8;
+ u64 i_wc_dxs:8;
+ u64 i_wd_dxs:8;
+ u64 i_we_dxs:8;
+ u64 i_wf_dxs:8;
} ii_iidem_fld_s;
} ii_iidem_u_t;
@@ -413,22 +413,22 @@ typedef union ii_iidem_u {
************************************************************************/
typedef union ii_ilcsr_u {
- uint64_t ii_ilcsr_regval;
- struct {
- uint64_t i_nullto:6;
- uint64_t i_rsvd_4:2;
- uint64_t i_wrmrst:1;
- uint64_t i_rsvd_3:1;
- uint64_t i_llp_en:1;
- uint64_t i_bm8:1;
- uint64_t i_llp_stat:2;
- uint64_t i_remote_power:1;
- uint64_t i_rsvd_2:1;
- uint64_t i_maxrtry:10;
- uint64_t i_d_avail_sel:2;
- uint64_t i_rsvd_1:4;
- uint64_t i_maxbrst:10;
- uint64_t i_rsvd:22;
+ u64 ii_ilcsr_regval;
+ struct {
+ u64 i_nullto:6;
+ u64 i_rsvd_4:2;
+ u64 i_wrmrst:1;
+ u64 i_rsvd_3:1;
+ u64 i_llp_en:1;
+ u64 i_bm8:1;
+ u64 i_llp_stat:2;
+ u64 i_remote_power:1;
+ u64 i_rsvd_2:1;
+ u64 i_maxrtry:10;
+ u64 i_d_avail_sel:2;
+ u64 i_rsvd_1:4;
+ u64 i_maxbrst:10;
+ u64 i_rsvd:22;
} ii_ilcsr_fld_s;
} ii_ilcsr_u_t;
@@ -441,11 +441,11 @@ typedef union ii_ilcsr_u {
************************************************************************/
typedef union ii_illr_u {
- uint64_t ii_illr_regval;
+ u64 ii_illr_regval;
struct {
- uint64_t i_sn_cnt:16;
- uint64_t i_cb_cnt:16;
- uint64_t i_rsvd:32;
+ u64 i_sn_cnt:16;
+ u64 i_cb_cnt:16;
+ u64 i_rsvd:32;
} ii_illr_fld_s;
} ii_illr_u_t;
@@ -464,19 +464,19 @@ typedef union ii_illr_u {
************************************************************************/
typedef union ii_iidsr_u {
- uint64_t ii_iidsr_regval;
- struct {
- uint64_t i_level:8;
- uint64_t i_pi_id:1;
- uint64_t i_node:11;
- uint64_t i_rsvd_3:4;
- uint64_t i_enable:1;
- uint64_t i_rsvd_2:3;
- uint64_t i_int_sent:2;
- uint64_t i_rsvd_1:2;
- uint64_t i_pi0_forward_int:1;
- uint64_t i_pi1_forward_int:1;
- uint64_t i_rsvd:30;
+ u64 ii_iidsr_regval;
+ struct {
+ u64 i_level:8;
+ u64 i_pi_id:1;
+ u64 i_node:11;
+ u64 i_rsvd_3:4;
+ u64 i_enable:1;
+ u64 i_rsvd_2:3;
+ u64 i_int_sent:2;
+ u64 i_rsvd_1:2;
+ u64 i_pi0_forward_int:1;
+ u64 i_pi1_forward_int:1;
+ u64 i_rsvd:30;
} ii_iidsr_fld_s;
} ii_iidsr_u_t;
@@ -492,13 +492,13 @@ typedef union ii_iidsr_u {
************************************************************************/
typedef union ii_igfx0_u {
- uint64_t ii_igfx0_regval;
+ u64 ii_igfx0_regval;
struct {
- uint64_t i_w_num:4;
- uint64_t i_pi_id:1;
- uint64_t i_n_num:12;
- uint64_t i_p_num:1;
- uint64_t i_rsvd:46;
+ u64 i_w_num:4;
+ u64 i_pi_id:1;
+ u64 i_n_num:12;
+ u64 i_p_num:1;
+ u64 i_rsvd:46;
} ii_igfx0_fld_s;
} ii_igfx0_u_t;
@@ -514,13 +514,13 @@ typedef union ii_igfx0_u {
************************************************************************/
typedef union ii_igfx1_u {
- uint64_t ii_igfx1_regval;
+ u64 ii_igfx1_regval;
struct {
- uint64_t i_w_num:4;
- uint64_t i_pi_id:1;
- uint64_t i_n_num:12;
- uint64_t i_p_num:1;
- uint64_t i_rsvd:46;
+ u64 i_w_num:4;
+ u64 i_pi_id:1;
+ u64 i_n_num:12;
+ u64 i_p_num:1;
+ u64 i_rsvd:46;
} ii_igfx1_fld_s;
} ii_igfx1_u_t;
@@ -532,9 +532,9 @@ typedef union ii_igfx1_u {
************************************************************************/
typedef union ii_iscr0_u {
- uint64_t ii_iscr0_regval;
+ u64 ii_iscr0_regval;
struct {
- uint64_t i_scratch:64;
+ u64 i_scratch:64;
} ii_iscr0_fld_s;
} ii_iscr0_u_t;
@@ -546,9 +546,9 @@ typedef union ii_iscr0_u {
************************************************************************/
typedef union ii_iscr1_u {
- uint64_t ii_iscr1_regval;
+ u64 ii_iscr1_regval;
struct {
- uint64_t i_scratch:64;
+ u64 i_scratch:64;
} ii_iscr1_fld_s;
} ii_iscr1_u_t;
@@ -580,13 +580,13 @@ typedef union ii_iscr1_u {
************************************************************************/
typedef union ii_itte1_u {
- uint64_t ii_itte1_regval;
+ u64 ii_itte1_regval;
struct {
- uint64_t i_offset:5;
- uint64_t i_rsvd_1:3;
- uint64_t i_w_num:4;
- uint64_t i_iosp:1;
- uint64_t i_rsvd:51;
+ u64 i_offset:5;
+ u64 i_rsvd_1:3;
+ u64 i_w_num:4;
+ u64 i_iosp:1;
+ u64 i_rsvd:51;
} ii_itte1_fld_s;
} ii_itte1_u_t;
@@ -618,13 +618,13 @@ typedef union ii_itte1_u {
************************************************************************/
typedef union ii_itte2_u {
- uint64_t ii_itte2_regval;
+ u64 ii_itte2_regval;
struct {
- uint64_t i_offset:5;
- uint64_t i_rsvd_1:3;
- uint64_t i_w_num:4;
- uint64_t i_iosp:1;
- uint64_t i_rsvd:51;
+ u64 i_offset:5;
+ u64 i_rsvd_1:3;
+ u64 i_w_num:4;
+ u64 i_iosp:1;
+ u64 i_rsvd:51;
} ii_itte2_fld_s;
} ii_itte2_u_t;
@@ -656,13 +656,13 @@ typedef union ii_itte2_u {
************************************************************************/
typedef union ii_itte3_u {
- uint64_t ii_itte3_regval;
+ u64 ii_itte3_regval;
struct {
- uint64_t i_offset:5;
- uint64_t i_rsvd_1:3;
- uint64_t i_w_num:4;
- uint64_t i_iosp:1;
- uint64_t i_rsvd:51;
+ u64 i_offset:5;
+ u64 i_rsvd_1:3;
+ u64 i_w_num:4;
+ u64 i_iosp:1;
+ u64 i_rsvd:51;
} ii_itte3_fld_s;
} ii_itte3_u_t;
@@ -694,13 +694,13 @@ typedef union ii_itte3_u {
************************************************************************/
typedef union ii_itte4_u {
- uint64_t ii_itte4_regval;
+ u64 ii_itte4_regval;
struct {
- uint64_t i_offset:5;
- uint64_t i_rsvd_1:3;
- uint64_t i_w_num:4;
- uint64_t i_iosp:1;
- uint64_t i_rsvd:51;
+ u64 i_offset:5;
+ u64 i_rsvd_1:3;
+ u64 i_w_num:4;
+ u64 i_iosp:1;
+ u64 i_rsvd:51;
} ii_itte4_fld_s;
} ii_itte4_u_t;
@@ -732,13 +732,13 @@ typedef union ii_itte4_u {
************************************************************************/
typedef union ii_itte5_u {
- uint64_t ii_itte5_regval;
+ u64 ii_itte5_regval;
struct {
- uint64_t i_offset:5;
- uint64_t i_rsvd_1:3;
- uint64_t i_w_num:4;
- uint64_t i_iosp:1;
- uint64_t i_rsvd:51;
+ u64 i_offset:5;
+ u64 i_rsvd_1:3;
+ u64 i_w_num:4;
+ u64 i_iosp:1;
+ u64 i_rsvd:51;
} ii_itte5_fld_s;
} ii_itte5_u_t;
@@ -770,13 +770,13 @@ typedef union ii_itte5_u {
************************************************************************/
typedef union ii_itte6_u {
- uint64_t ii_itte6_regval;
+ u64 ii_itte6_regval;
struct {
- uint64_t i_offset:5;
- uint64_t i_rsvd_1:3;
- uint64_t i_w_num:4;
- uint64_t i_iosp:1;
- uint64_t i_rsvd:51;
+ u64 i_offset:5;
+ u64 i_rsvd_1:3;
+ u64 i_w_num:4;
+ u64 i_iosp:1;
+ u64 i_rsvd:51;
} ii_itte6_fld_s;
} ii_itte6_u_t;
@@ -808,13 +808,13 @@ typedef union ii_itte6_u {
************************************************************************/
typedef union ii_itte7_u {
- uint64_t ii_itte7_regval;
+ u64 ii_itte7_regval;
struct {
- uint64_t i_offset:5;
- uint64_t i_rsvd_1:3;
- uint64_t i_w_num:4;
- uint64_t i_iosp:1;
- uint64_t i_rsvd:51;
+ u64 i_offset:5;
+ u64 i_rsvd_1:3;
+ u64 i_w_num:4;
+ u64 i_iosp:1;
+ u64 i_rsvd:51;
} ii_itte7_fld_s;
} ii_itte7_u_t;
@@ -843,22 +843,22 @@ typedef union ii_itte7_u {
************************************************************************/
typedef union ii_iprb0_u {
- uint64_t ii_iprb0_regval;
- struct {
- uint64_t i_c:8;
- uint64_t i_na:14;
- uint64_t i_rsvd_2:2;
- uint64_t i_nb:14;
- uint64_t i_rsvd_1:2;
- uint64_t i_m:2;
- uint64_t i_f:1;
- uint64_t i_of_cnt:5;
- uint64_t i_error:1;
- uint64_t i_rd_to:1;
- uint64_t i_spur_wr:1;
- uint64_t i_spur_rd:1;
- uint64_t i_rsvd:11;
- uint64_t i_mult_err:1;
+ u64 ii_iprb0_regval;
+ struct {
+ u64 i_c:8;
+ u64 i_na:14;
+ u64 i_rsvd_2:2;
+ u64 i_nb:14;
+ u64 i_rsvd_1:2;
+ u64 i_m:2;
+ u64 i_f:1;
+ u64 i_of_cnt:5;
+ u64 i_error:1;
+ u64 i_rd_to:1;
+ u64 i_spur_wr:1;
+ u64 i_spur_rd:1;
+ u64 i_rsvd:11;
+ u64 i_mult_err:1;
} ii_iprb0_fld_s;
} ii_iprb0_u_t;
@@ -887,22 +887,22 @@ typedef union ii_iprb0_u {
************************************************************************/
typedef union ii_iprb8_u {
- uint64_t ii_iprb8_regval;
- struct {
- uint64_t i_c:8;
- uint64_t i_na:14;
- uint64_t i_rsvd_2:2;
- uint64_t i_nb:14;
- uint64_t i_rsvd_1:2;
- uint64_t i_m:2;
- uint64_t i_f:1;
- uint64_t i_of_cnt:5;
- uint64_t i_error:1;
- uint64_t i_rd_to:1;
- uint64_t i_spur_wr:1;
- uint64_t i_spur_rd:1;
- uint64_t i_rsvd:11;
- uint64_t i_mult_err:1;
+ u64 ii_iprb8_regval;
+ struct {
+ u64 i_c:8;
+ u64 i_na:14;
+ u64 i_rsvd_2:2;
+ u64 i_nb:14;
+ u64 i_rsvd_1:2;
+ u64 i_m:2;
+ u64 i_f:1;
+ u64 i_of_cnt:5;
+ u64 i_error:1;
+ u64 i_rd_to:1;
+ u64 i_spur_wr:1;
+ u64 i_spur_rd:1;
+ u64 i_rsvd:11;
+ u64 i_mult_err:1;
} ii_iprb8_fld_s;
} ii_iprb8_u_t;
@@ -931,22 +931,22 @@ typedef union ii_iprb8_u {
************************************************************************/
typedef union ii_iprb9_u {
- uint64_t ii_iprb9_regval;
- struct {
- uint64_t i_c:8;
- uint64_t i_na:14;
- uint64_t i_rsvd_2:2;
- uint64_t i_nb:14;
- uint64_t i_rsvd_1:2;
- uint64_t i_m:2;
- uint64_t i_f:1;
- uint64_t i_of_cnt:5;
- uint64_t i_error:1;
- uint64_t i_rd_to:1;
- uint64_t i_spur_wr:1;
- uint64_t i_spur_rd:1;
- uint64_t i_rsvd:11;
- uint64_t i_mult_err:1;
+ u64 ii_iprb9_regval;
+ struct {
+ u64 i_c:8;
+ u64 i_na:14;
+ u64 i_rsvd_2:2;
+ u64 i_nb:14;
+ u64 i_rsvd_1:2;
+ u64 i_m:2;
+ u64 i_f:1;
+ u64 i_of_cnt:5;
+ u64 i_error:1;
+ u64 i_rd_to:1;
+ u64 i_spur_wr:1;
+ u64 i_spur_rd:1;
+ u64 i_rsvd:11;
+ u64 i_mult_err:1;
} ii_iprb9_fld_s;
} ii_iprb9_u_t;
@@ -975,22 +975,22 @@ typedef union ii_iprb9_u {
************************************************************************/
typedef union ii_iprba_u {
- uint64_t ii_iprba_regval;
- struct {
- uint64_t i_c:8;
- uint64_t i_na:14;
- uint64_t i_rsvd_2:2;
- uint64_t i_nb:14;
- uint64_t i_rsvd_1:2;
- uint64_t i_m:2;
- uint64_t i_f:1;
- uint64_t i_of_cnt:5;
- uint64_t i_error:1;
- uint64_t i_rd_to:1;
- uint64_t i_spur_wr:1;
- uint64_t i_spur_rd:1;
- uint64_t i_rsvd:11;
- uint64_t i_mult_err:1;
+ u64 ii_iprba_regval;
+ struct {
+ u64 i_c:8;
+ u64 i_na:14;
+ u64 i_rsvd_2:2;
+ u64 i_nb:14;
+ u64 i_rsvd_1:2;
+ u64 i_m:2;
+ u64 i_f:1;
+ u64 i_of_cnt:5;
+ u64 i_error:1;
+ u64 i_rd_to:1;
+ u64 i_spur_wr:1;
+ u64 i_spur_rd:1;
+ u64 i_rsvd:11;
+ u64 i_mult_err:1;
} ii_iprba_fld_s;
} ii_iprba_u_t;
@@ -1019,22 +1019,22 @@ typedef union ii_iprba_u {
************************************************************************/
typedef union ii_iprbb_u {
- uint64_t ii_iprbb_regval;
- struct {
- uint64_t i_c:8;
- uint64_t i_na:14;
- uint64_t i_rsvd_2:2;
- uint64_t i_nb:14;
- uint64_t i_rsvd_1:2;
- uint64_t i_m:2;
- uint64_t i_f:1;
- uint64_t i_of_cnt:5;
- uint64_t i_error:1;
- uint64_t i_rd_to:1;
- uint64_t i_spur_wr:1;
- uint64_t i_spur_rd:1;
- uint64_t i_rsvd:11;
- uint64_t i_mult_err:1;
+ u64 ii_iprbb_regval;
+ struct {
+ u64 i_c:8;
+ u64 i_na:14;
+ u64 i_rsvd_2:2;
+ u64 i_nb:14;
+ u64 i_rsvd_1:2;
+ u64 i_m:2;
+ u64 i_f:1;
+ u64 i_of_cnt:5;
+ u64 i_error:1;
+ u64 i_rd_to:1;
+ u64 i_spur_wr:1;
+ u64 i_spur_rd:1;
+ u64 i_rsvd:11;
+ u64 i_mult_err:1;
} ii_iprbb_fld_s;
} ii_iprbb_u_t;
@@ -1063,22 +1063,22 @@ typedef union ii_iprbb_u {
************************************************************************/
typedef union ii_iprbc_u {
- uint64_t ii_iprbc_regval;
- struct {
- uint64_t i_c:8;
- uint64_t i_na:14;
- uint64_t i_rsvd_2:2;
- uint64_t i_nb:14;
- uint64_t i_rsvd_1:2;
- uint64_t i_m:2;
- uint64_t i_f:1;
- uint64_t i_of_cnt:5;
- uint64_t i_error:1;
- uint64_t i_rd_to:1;
- uint64_t i_spur_wr:1;
- uint64_t i_spur_rd:1;
- uint64_t i_rsvd:11;
- uint64_t i_mult_err:1;
+ u64 ii_iprbc_regval;
+ struct {
+ u64 i_c:8;
+ u64 i_na:14;
+ u64 i_rsvd_2:2;
+ u64 i_nb:14;
+ u64 i_rsvd_1:2;
+ u64 i_m:2;
+ u64 i_f:1;
+ u64 i_of_cnt:5;
+ u64 i_error:1;
+ u64 i_rd_to:1;
+ u64 i_spur_wr:1;
+ u64 i_spur_rd:1;
+ u64 i_rsvd:11;
+ u64 i_mult_err:1;
} ii_iprbc_fld_s;
} ii_iprbc_u_t;
@@ -1107,22 +1107,22 @@ typedef union ii_iprbc_u {
************************************************************************/
typedef union ii_iprbd_u {
- uint64_t ii_iprbd_regval;
- struct {
- uint64_t i_c:8;
- uint64_t i_na:14;
- uint64_t i_rsvd_2:2;
- uint64_t i_nb:14;
- uint64_t i_rsvd_1:2;
- uint64_t i_m:2;
- uint64_t i_f:1;
- uint64_t i_of_cnt:5;
- uint64_t i_error:1;
- uint64_t i_rd_to:1;
- uint64_t i_spur_wr:1;
- uint64_t i_spur_rd:1;
- uint64_t i_rsvd:11;
- uint64_t i_mult_err:1;
+ u64 ii_iprbd_regval;
+ struct {
+ u64 i_c:8;
+ u64 i_na:14;
+ u64 i_rsvd_2:2;
+ u64 i_nb:14;
+ u64 i_rsvd_1:2;
+ u64 i_m:2;
+ u64 i_f:1;
+ u64 i_of_cnt:5;
+ u64 i_error:1;
+ u64 i_rd_to:1;
+ u64 i_spur_wr:1;
+ u64 i_spur_rd:1;
+ u64 i_rsvd:11;
+ u64 i_mult_err:1;
} ii_iprbd_fld_s;
} ii_iprbd_u_t;
@@ -1151,22 +1151,22 @@ typedef union ii_iprbd_u {
************************************************************************/
typedef union ii_iprbe_u {
- uint64_t ii_iprbe_regval;
- struct {
- uint64_t i_c:8;
- uint64_t i_na:14;
- uint64_t i_rsvd_2:2;
- uint64_t i_nb:14;
- uint64_t i_rsvd_1:2;
- uint64_t i_m:2;
- uint64_t i_f:1;
- uint64_t i_of_cnt:5;
- uint64_t i_error:1;
- uint64_t i_rd_to:1;
- uint64_t i_spur_wr:1;
- uint64_t i_spur_rd:1;
- uint64_t i_rsvd:11;
- uint64_t i_mult_err:1;
+ u64 ii_iprbe_regval;
+ struct {
+ u64 i_c:8;
+ u64 i_na:14;
+ u64 i_rsvd_2:2;
+ u64 i_nb:14;
+ u64 i_rsvd_1:2;
+ u64 i_m:2;
+ u64 i_f:1;
+ u64 i_of_cnt:5;
+ u64 i_error:1;
+ u64 i_rd_to:1;
+ u64 i_spur_wr:1;
+ u64 i_spur_rd:1;
+ u64 i_rsvd:11;
+ u64 i_mult_err:1;
} ii_iprbe_fld_s;
} ii_iprbe_u_t;
@@ -1195,22 +1195,22 @@ typedef union ii_iprbe_u {
************************************************************************/
typedef union ii_iprbf_u {
- uint64_t ii_iprbf_regval;
- struct {
- uint64_t i_c:8;
- uint64_t i_na:14;
- uint64_t i_rsvd_2:2;
- uint64_t i_nb:14;
- uint64_t i_rsvd_1:2;
- uint64_t i_m:2;
- uint64_t i_f:1;
- uint64_t i_of_cnt:5;
- uint64_t i_error:1;
- uint64_t i_rd_to:1;
- uint64_t i_spur_wr:1;
- uint64_t i_spur_rd:1;
- uint64_t i_rsvd:11;
- uint64_t i_mult_err:1;
+ u64 ii_iprbf_regval;
+ struct {
+ u64 i_c:8;
+ u64 i_na:14;
+ u64 i_rsvd_2:2;
+ u64 i_nb:14;
+ u64 i_rsvd_1:2;
+ u64 i_m:2;
+ u64 i_f:1;
+ u64 i_of_cnt:5;
+ u64 i_error:1;
+ u64 i_rd_to:1;
+ u64 i_spur_wr:1;
+ u64 i_spur_rd:1;
+ u64 i_rsvd:11;
+ u64 i_mult_err:1;
} ii_iprbe_fld_s;
} ii_iprbf_u_t;
@@ -1232,10 +1232,10 @@ typedef union ii_iprbf_u {
************************************************************************/
typedef union ii_ixcc_u {
- uint64_t ii_ixcc_regval;
+ u64 ii_ixcc_regval;
struct {
- uint64_t i_time_out:26;
- uint64_t i_rsvd:38;
+ u64 i_time_out:26;
+ u64 i_rsvd:38;
} ii_ixcc_fld_s;
} ii_ixcc_u_t;
@@ -1256,16 +1256,16 @@ typedef union ii_ixcc_u {
************************************************************************/
typedef union ii_imem_u {
- uint64_t ii_imem_regval;
- struct {
- uint64_t i_w0_esd:1;
- uint64_t i_rsvd_3:3;
- uint64_t i_b0_esd:1;
- uint64_t i_rsvd_2:3;
- uint64_t i_b1_esd:1;
- uint64_t i_rsvd_1:3;
- uint64_t i_clr_precise:1;
- uint64_t i_rsvd:51;
+ u64 ii_imem_regval;
+ struct {
+ u64 i_w0_esd:1;
+ u64 i_rsvd_3:3;
+ u64 i_b0_esd:1;
+ u64 i_rsvd_2:3;
+ u64 i_b1_esd:1;
+ u64 i_rsvd_1:3;
+ u64 i_clr_precise:1;
+ u64 i_rsvd:51;
} ii_imem_fld_s;
} ii_imem_u_t;
@@ -1294,13 +1294,13 @@ typedef union ii_imem_u {
************************************************************************/
typedef union ii_ixtt_u {
- uint64_t ii_ixtt_regval;
+ u64 ii_ixtt_regval;
struct {
- uint64_t i_tail_to:26;
- uint64_t i_rsvd_1:6;
- uint64_t i_rrsp_ps:23;
- uint64_t i_rrsp_to:5;
- uint64_t i_rsvd:4;
+ u64 i_tail_to:26;
+ u64 i_rsvd_1:6;
+ u64 i_rrsp_ps:23;
+ u64 i_rrsp_to:5;
+ u64 i_rsvd:4;
} ii_ixtt_fld_s;
} ii_ixtt_u_t;
@@ -1316,37 +1316,37 @@ typedef union ii_ixtt_u {
************************************************************************/
typedef union ii_ieclr_u {
- uint64_t ii_ieclr_regval;
- struct {
- uint64_t i_e_prb_0:1;
- uint64_t i_rsvd:7;
- uint64_t i_e_prb_8:1;
- uint64_t i_e_prb_9:1;
- uint64_t i_e_prb_a:1;
- uint64_t i_e_prb_b:1;
- uint64_t i_e_prb_c:1;
- uint64_t i_e_prb_d:1;
- uint64_t i_e_prb_e:1;
- uint64_t i_e_prb_f:1;
- uint64_t i_e_crazy:1;
- uint64_t i_e_bte_0:1;
- uint64_t i_e_bte_1:1;
- uint64_t i_reserved_1:10;
- uint64_t i_spur_rd_hdr:1;
- uint64_t i_cam_intr_to:1;
- uint64_t i_cam_overflow:1;
- uint64_t i_cam_read_miss:1;
- uint64_t i_ioq_rep_underflow:1;
- uint64_t i_ioq_req_underflow:1;
- uint64_t i_ioq_rep_overflow:1;
- uint64_t i_ioq_req_overflow:1;
- uint64_t i_iiq_rep_overflow:1;
- uint64_t i_iiq_req_overflow:1;
- uint64_t i_ii_xn_rep_cred_overflow:1;
- uint64_t i_ii_xn_req_cred_overflow:1;
- uint64_t i_ii_xn_invalid_cmd:1;
- uint64_t i_xn_ii_invalid_cmd:1;
- uint64_t i_reserved_2:21;
+ u64 ii_ieclr_regval;
+ struct {
+ u64 i_e_prb_0:1;
+ u64 i_rsvd:7;
+ u64 i_e_prb_8:1;
+ u64 i_e_prb_9:1;
+ u64 i_e_prb_a:1;
+ u64 i_e_prb_b:1;
+ u64 i_e_prb_c:1;
+ u64 i_e_prb_d:1;
+ u64 i_e_prb_e:1;
+ u64 i_e_prb_f:1;
+ u64 i_e_crazy:1;
+ u64 i_e_bte_0:1;
+ u64 i_e_bte_1:1;
+ u64 i_reserved_1:10;
+ u64 i_spur_rd_hdr:1;
+ u64 i_cam_intr_to:1;
+ u64 i_cam_overflow:1;
+ u64 i_cam_read_miss:1;
+ u64 i_ioq_rep_underflow:1;
+ u64 i_ioq_req_underflow:1;
+ u64 i_ioq_rep_overflow:1;
+ u64 i_ioq_req_overflow:1;
+ u64 i_iiq_rep_overflow:1;
+ u64 i_iiq_req_overflow:1;
+ u64 i_ii_xn_rep_cred_overflow:1;
+ u64 i_ii_xn_req_cred_overflow:1;
+ u64 i_ii_xn_invalid_cmd:1;
+ u64 i_xn_ii_invalid_cmd:1;
+ u64 i_reserved_2:21;
} ii_ieclr_fld_s;
} ii_ieclr_u_t;
@@ -1360,12 +1360,12 @@ typedef union ii_ieclr_u {
************************************************************************/
typedef union ii_ibcr_u {
- uint64_t ii_ibcr_regval;
+ u64 ii_ibcr_regval;
struct {
- uint64_t i_count:4;
- uint64_t i_rsvd_1:4;
- uint64_t i_soft_reset:1;
- uint64_t i_rsvd:55;
+ u64 i_count:4;
+ u64 i_rsvd_1:4;
+ u64 i_soft_reset:1;
+ u64 i_rsvd:55;
} ii_ibcr_fld_s;
} ii_ibcr_u_t;
@@ -1399,22 +1399,22 @@ typedef union ii_ibcr_u {
************************************************************************/
typedef union ii_ixsm_u {
- uint64_t ii_ixsm_regval;
- struct {
- uint64_t i_byte_en:32;
- uint64_t i_reserved:1;
- uint64_t i_tag:3;
- uint64_t i_alt_pactyp:4;
- uint64_t i_bo:1;
- uint64_t i_error:1;
- uint64_t i_vbpm:1;
- uint64_t i_gbr:1;
- uint64_t i_ds:2;
- uint64_t i_ct:1;
- uint64_t i_tnum:5;
- uint64_t i_pactyp:4;
- uint64_t i_sidn:4;
- uint64_t i_didn:4;
+ u64 ii_ixsm_regval;
+ struct {
+ u64 i_byte_en:32;
+ u64 i_reserved:1;
+ u64 i_tag:3;
+ u64 i_alt_pactyp:4;
+ u64 i_bo:1;
+ u64 i_error:1;
+ u64 i_vbpm:1;
+ u64 i_gbr:1;
+ u64 i_ds:2;
+ u64 i_ct:1;
+ u64 i_tnum:5;
+ u64 i_pactyp:4;
+ u64 i_sidn:4;
+ u64 i_didn:4;
} ii_ixsm_fld_s;
} ii_ixsm_u_t;
@@ -1426,11 +1426,11 @@ typedef union ii_ixsm_u {
************************************************************************/
typedef union ii_ixss_u {
- uint64_t ii_ixss_regval;
+ u64 ii_ixss_regval;
struct {
- uint64_t i_sideband:8;
- uint64_t i_rsvd:55;
- uint64_t i_valid:1;
+ u64 i_sideband:8;
+ u64 i_rsvd:55;
+ u64 i_valid:1;
} ii_ixss_fld_s;
} ii_ixss_u_t;
@@ -1447,17 +1447,17 @@ typedef union ii_ixss_u {
************************************************************************/
typedef union ii_ilct_u {
- uint64_t ii_ilct_regval;
- struct {
- uint64_t i_test_seed:20;
- uint64_t i_test_mask:8;
- uint64_t i_test_data:20;
- uint64_t i_test_valid:1;
- uint64_t i_test_cberr:1;
- uint64_t i_test_flit:3;
- uint64_t i_test_clear:1;
- uint64_t i_test_err_capture:1;
- uint64_t i_rsvd:9;
+ u64 ii_ilct_regval;
+ struct {
+ u64 i_test_seed:20;
+ u64 i_test_mask:8;
+ u64 i_test_data:20;
+ u64 i_test_valid:1;
+ u64 i_test_cberr:1;
+ u64 i_test_flit:3;
+ u64 i_test_clear:1;
+ u64 i_test_err_capture:1;
+ u64 i_rsvd:9;
} ii_ilct_fld_s;
} ii_ilct_u_t;
@@ -1482,20 +1482,20 @@ typedef union ii_ilct_u {
************************************************************************/
typedef union ii_iieph1_u {
- uint64_t ii_iieph1_regval;
- struct {
- uint64_t i_command:7;
- uint64_t i_rsvd_5:1;
- uint64_t i_suppl:14;
- uint64_t i_rsvd_4:1;
- uint64_t i_source:14;
- uint64_t i_rsvd_3:1;
- uint64_t i_err_type:4;
- uint64_t i_rsvd_2:4;
- uint64_t i_overrun:1;
- uint64_t i_rsvd_1:3;
- uint64_t i_valid:1;
- uint64_t i_rsvd:13;
+ u64 ii_iieph1_regval;
+ struct {
+ u64 i_command:7;
+ u64 i_rsvd_5:1;
+ u64 i_suppl:14;
+ u64 i_rsvd_4:1;
+ u64 i_source:14;
+ u64 i_rsvd_3:1;
+ u64 i_err_type:4;
+ u64 i_rsvd_2:4;
+ u64 i_overrun:1;
+ u64 i_rsvd_1:3;
+ u64 i_valid:1;
+ u64 i_rsvd:13;
} ii_iieph1_fld_s;
} ii_iieph1_u_t;
@@ -1511,13 +1511,13 @@ typedef union ii_iieph1_u {
************************************************************************/
typedef union ii_iieph2_u {
- uint64_t ii_iieph2_regval;
+ u64 ii_iieph2_regval;
struct {
- uint64_t i_rsvd_0:3;
- uint64_t i_address:47;
- uint64_t i_rsvd_1:10;
- uint64_t i_tail:1;
- uint64_t i_rsvd:3;
+ u64 i_rsvd_0:3;
+ u64 i_address:47;
+ u64 i_rsvd_1:10;
+ u64 i_tail:1;
+ u64 i_rsvd:3;
} ii_iieph2_fld_s;
} ii_iieph2_u_t;
@@ -1532,9 +1532,9 @@ typedef union ii_iieph2_u {
************************************************************************/
typedef union ii_islapr_u {
- uint64_t ii_islapr_regval;
+ u64 ii_islapr_regval;
struct {
- uint64_t i_region:64;
+ u64 i_region:64;
} ii_islapr_fld_s;
} ii_islapr_u_t;
@@ -1547,10 +1547,10 @@ typedef union ii_islapr_u {
************************************************************************/
typedef union ii_islapo_u {
- uint64_t ii_islapo_regval;
+ u64 ii_islapo_regval;
struct {
- uint64_t i_io_sbx_ovrride:56;
- uint64_t i_rsvd:8;
+ u64 i_io_sbx_ovrride:56;
+ u64 i_rsvd:8;
} ii_islapo_fld_s;
} ii_islapo_u_t;
@@ -1563,14 +1563,14 @@ typedef union ii_islapo_u {
************************************************************************/
typedef union ii_iwi_u {
- uint64_t ii_iwi_regval;
- struct {
- uint64_t i_prescale:24;
- uint64_t i_rsvd:8;
- uint64_t i_timeout:8;
- uint64_t i_rsvd1:8;
- uint64_t i_intrpt_retry_period:8;
- uint64_t i_rsvd2:8;
+ u64 ii_iwi_regval;
+ struct {
+ u64 i_prescale:24;
+ u64 i_rsvd:8;
+ u64 i_timeout:8;
+ u64 i_rsvd1:8;
+ u64 i_intrpt_retry_period:8;
+ u64 i_rsvd2:8;
} ii_iwi_fld_s;
} ii_iwi_u_t;
@@ -1582,26 +1582,26 @@ typedef union ii_iwi_u {
************************************************************************/
typedef union ii_iwel_u {
- uint64_t ii_iwel_regval;
- struct {
- uint64_t i_intr_timed_out:1;
- uint64_t i_rsvd:7;
- uint64_t i_cam_overflow:1;
- uint64_t i_cam_read_miss:1;
- uint64_t i_rsvd1:2;
- uint64_t i_ioq_rep_underflow:1;
- uint64_t i_ioq_req_underflow:1;
- uint64_t i_ioq_rep_overflow:1;
- uint64_t i_ioq_req_overflow:1;
- uint64_t i_iiq_rep_overflow:1;
- uint64_t i_iiq_req_overflow:1;
- uint64_t i_rsvd2:6;
- uint64_t i_ii_xn_rep_cred_over_under:1;
- uint64_t i_ii_xn_req_cred_over_under:1;
- uint64_t i_rsvd3:6;
- uint64_t i_ii_xn_invalid_cmd:1;
- uint64_t i_xn_ii_invalid_cmd:1;
- uint64_t i_rsvd4:30;
+ u64 ii_iwel_regval;
+ struct {
+ u64 i_intr_timed_out:1;
+ u64 i_rsvd:7;
+ u64 i_cam_overflow:1;
+ u64 i_cam_read_miss:1;
+ u64 i_rsvd1:2;
+ u64 i_ioq_rep_underflow:1;
+ u64 i_ioq_req_underflow:1;
+ u64 i_ioq_rep_overflow:1;
+ u64 i_ioq_req_overflow:1;
+ u64 i_iiq_rep_overflow:1;
+ u64 i_iiq_req_overflow:1;
+ u64 i_rsvd2:6;
+ u64 i_ii_xn_rep_cred_over_under:1;
+ u64 i_ii_xn_req_cred_over_under:1;
+ u64 i_rsvd3:6;
+ u64 i_ii_xn_invalid_cmd:1;
+ u64 i_xn_ii_invalid_cmd:1;
+ u64 i_rsvd4:30;
} ii_iwel_fld_s;
} ii_iwel_u_t;
@@ -1612,22 +1612,22 @@ typedef union ii_iwel_u {
************************************************************************/
typedef union ii_iwc_u {
- uint64_t ii_iwc_regval;
- struct {
- uint64_t i_dma_byte_swap:1;
- uint64_t i_rsvd:3;
- uint64_t i_cam_read_lines_reset:1;
- uint64_t i_rsvd1:3;
- uint64_t i_ii_xn_cred_over_under_log:1;
- uint64_t i_rsvd2:19;
- uint64_t i_xn_rep_iq_depth:5;
- uint64_t i_rsvd3:3;
- uint64_t i_xn_req_iq_depth:5;
- uint64_t i_rsvd4:3;
- uint64_t i_iiq_depth:6;
- uint64_t i_rsvd5:12;
- uint64_t i_force_rep_cred:1;
- uint64_t i_force_req_cred:1;
+ u64 ii_iwc_regval;
+ struct {
+ u64 i_dma_byte_swap:1;
+ u64 i_rsvd:3;
+ u64 i_cam_read_lines_reset:1;
+ u64 i_rsvd1:3;
+ u64 i_ii_xn_cred_over_under_log:1;
+ u64 i_rsvd2:19;
+ u64 i_xn_rep_iq_depth:5;
+ u64 i_rsvd3:3;
+ u64 i_xn_req_iq_depth:5;
+ u64 i_rsvd4:3;
+ u64 i_iiq_depth:6;
+ u64 i_rsvd5:12;
+ u64 i_force_rep_cred:1;
+ u64 i_force_req_cred:1;
} ii_iwc_fld_s;
} ii_iwc_u_t;
@@ -1638,12 +1638,12 @@ typedef union ii_iwc_u {
************************************************************************/
typedef union ii_iws_u {
- uint64_t ii_iws_regval;
+ u64 ii_iws_regval;
struct {
- uint64_t i_xn_rep_iq_credits:5;
- uint64_t i_rsvd:3;
- uint64_t i_xn_req_iq_credits:5;
- uint64_t i_rsvd1:51;
+ u64 i_xn_rep_iq_credits:5;
+ u64 i_rsvd:3;
+ u64 i_xn_req_iq_credits:5;
+ u64 i_rsvd1:51;
} ii_iws_fld_s;
} ii_iws_u_t;
@@ -1654,26 +1654,26 @@ typedef union ii_iws_u {
************************************************************************/
typedef union ii_iweim_u {
- uint64_t ii_iweim_regval;
- struct {
- uint64_t i_intr_timed_out:1;
- uint64_t i_rsvd:7;
- uint64_t i_cam_overflow:1;
- uint64_t i_cam_read_miss:1;
- uint64_t i_rsvd1:2;
- uint64_t i_ioq_rep_underflow:1;
- uint64_t i_ioq_req_underflow:1;
- uint64_t i_ioq_rep_overflow:1;
- uint64_t i_ioq_req_overflow:1;
- uint64_t i_iiq_rep_overflow:1;
- uint64_t i_iiq_req_overflow:1;
- uint64_t i_rsvd2:6;
- uint64_t i_ii_xn_rep_cred_overflow:1;
- uint64_t i_ii_xn_req_cred_overflow:1;
- uint64_t i_rsvd3:6;
- uint64_t i_ii_xn_invalid_cmd:1;
- uint64_t i_xn_ii_invalid_cmd:1;
- uint64_t i_rsvd4:30;
+ u64 ii_iweim_regval;
+ struct {
+ u64 i_intr_timed_out:1;
+ u64 i_rsvd:7;
+ u64 i_cam_overflow:1;
+ u64 i_cam_read_miss:1;
+ u64 i_rsvd1:2;
+ u64 i_ioq_rep_underflow:1;
+ u64 i_ioq_req_underflow:1;
+ u64 i_ioq_rep_overflow:1;
+ u64 i_ioq_req_overflow:1;
+ u64 i_iiq_rep_overflow:1;
+ u64 i_iiq_req_overflow:1;
+ u64 i_rsvd2:6;
+ u64 i_ii_xn_rep_cred_overflow:1;
+ u64 i_ii_xn_req_cred_overflow:1;
+ u64 i_rsvd3:6;
+ u64 i_ii_xn_invalid_cmd:1;
+ u64 i_xn_ii_invalid_cmd:1;
+ u64 i_rsvd4:30;
} ii_iweim_fld_s;
} ii_iweim_u_t;
@@ -1688,13 +1688,13 @@ typedef union ii_iweim_u {
************************************************************************/
typedef union ii_ipca_u {
- uint64_t ii_ipca_regval;
+ u64 ii_ipca_regval;
struct {
- uint64_t i_wid:4;
- uint64_t i_adjust:1;
- uint64_t i_rsvd_1:3;
- uint64_t i_field:2;
- uint64_t i_rsvd:54;
+ u64 i_wid:4;
+ u64 i_adjust:1;
+ u64 i_rsvd_1:3;
+ u64 i_field:2;
+ u64 i_rsvd:54;
} ii_ipca_fld_s;
} ii_ipca_u_t;
@@ -1709,12 +1709,12 @@ typedef union ii_ipca_u {
************************************************************************/
typedef union ii_iprte0a_u {
- uint64_t ii_iprte0a_regval;
+ u64 ii_iprte0a_regval;
struct {
- uint64_t i_rsvd_1:54;
- uint64_t i_widget:4;
- uint64_t i_to_cnt:5;
- uint64_t i_vld:1;
+ u64 i_rsvd_1:54;
+ u64 i_widget:4;
+ u64 i_to_cnt:5;
+ u64 i_vld:1;
} ii_iprte0a_fld_s;
} ii_iprte0a_u_t;
@@ -1729,12 +1729,12 @@ typedef union ii_iprte0a_u {
************************************************************************/
typedef union ii_iprte1a_u {
- uint64_t ii_iprte1a_regval;
+ u64 ii_iprte1a_regval;
struct {
- uint64_t i_rsvd_1:54;
- uint64_t i_widget:4;
- uint64_t i_to_cnt:5;
- uint64_t i_vld:1;
+ u64 i_rsvd_1:54;
+ u64 i_widget:4;
+ u64 i_to_cnt:5;
+ u64 i_vld:1;
} ii_iprte1a_fld_s;
} ii_iprte1a_u_t;
@@ -1749,12 +1749,12 @@ typedef union ii_iprte1a_u {
************************************************************************/
typedef union ii_iprte2a_u {
- uint64_t ii_iprte2a_regval;
+ u64 ii_iprte2a_regval;
struct {
- uint64_t i_rsvd_1:54;
- uint64_t i_widget:4;
- uint64_t i_to_cnt:5;
- uint64_t i_vld:1;
+ u64 i_rsvd_1:54;
+ u64 i_widget:4;
+ u64 i_to_cnt:5;
+ u64 i_vld:1;
} ii_iprte2a_fld_s;
} ii_iprte2a_u_t;
@@ -1769,12 +1769,12 @@ typedef union ii_iprte2a_u {
************************************************************************/
typedef union ii_iprte3a_u {
- uint64_t ii_iprte3a_regval;
+ u64 ii_iprte3a_regval;
struct {
- uint64_t i_rsvd_1:54;
- uint64_t i_widget:4;
- uint64_t i_to_cnt:5;
- uint64_t i_vld:1;
+ u64 i_rsvd_1:54;
+ u64 i_widget:4;
+ u64 i_to_cnt:5;
+ u64 i_vld:1;
} ii_iprte3a_fld_s;
} ii_iprte3a_u_t;
@@ -1789,12 +1789,12 @@ typedef union ii_iprte3a_u {
************************************************************************/
typedef union ii_iprte4a_u {
- uint64_t ii_iprte4a_regval;
+ u64 ii_iprte4a_regval;
struct {
- uint64_t i_rsvd_1:54;
- uint64_t i_widget:4;
- uint64_t i_to_cnt:5;
- uint64_t i_vld:1;
+ u64 i_rsvd_1:54;
+ u64 i_widget:4;
+ u64 i_to_cnt:5;
+ u64 i_vld:1;
} ii_iprte4a_fld_s;
} ii_iprte4a_u_t;
@@ -1809,12 +1809,12 @@ typedef union ii_iprte4a_u {
************************************************************************/
typedef union ii_iprte5a_u {
- uint64_t ii_iprte5a_regval;
+ u64 ii_iprte5a_regval;
struct {
- uint64_t i_rsvd_1:54;
- uint64_t i_widget:4;
- uint64_t i_to_cnt:5;
- uint64_t i_vld:1;
+ u64 i_rsvd_1:54;
+ u64 i_widget:4;
+ u64 i_to_cnt:5;
+ u64 i_vld:1;
} ii_iprte5a_fld_s;
} ii_iprte5a_u_t;
@@ -1829,12 +1829,12 @@ typedef union ii_iprte5a_u {
************************************************************************/
typedef union ii_iprte6a_u {
- uint64_t ii_iprte6a_regval;
+ u64 ii_iprte6a_regval;
struct {
- uint64_t i_rsvd_1:54;
- uint64_t i_widget:4;
- uint64_t i_to_cnt:5;
- uint64_t i_vld:1;
+ u64 i_rsvd_1:54;
+ u64 i_widget:4;
+ u64 i_to_cnt:5;
+ u64 i_vld:1;
} ii_iprte6a_fld_s;
} ii_iprte6a_u_t;
@@ -1849,12 +1849,12 @@ typedef union ii_iprte6a_u {
************************************************************************/
typedef union ii_iprte7a_u {
- uint64_t ii_iprte7a_regval;
+ u64 ii_iprte7a_regval;
struct {
- uint64_t i_rsvd_1:54;
- uint64_t i_widget:4;
- uint64_t i_to_cnt:5;
- uint64_t i_vld:1;
+ u64 i_rsvd_1:54;
+ u64 i_widget:4;
+ u64 i_to_cnt:5;
+ u64 i_vld:1;
} ii_iprtea7_fld_s;
} ii_iprte7a_u_t;
@@ -1869,12 +1869,12 @@ typedef union ii_iprte7a_u {
************************************************************************/
typedef union ii_iprte0b_u {
- uint64_t ii_iprte0b_regval;
+ u64 ii_iprte0b_regval;
struct {
- uint64_t i_rsvd_1:3;
- uint64_t i_address:47;
- uint64_t i_init:3;
- uint64_t i_source:11;
+ u64 i_rsvd_1:3;
+ u64 i_address:47;
+ u64 i_init:3;
+ u64 i_source:11;
} ii_iprte0b_fld_s;
} ii_iprte0b_u_t;
@@ -1889,12 +1889,12 @@ typedef union ii_iprte0b_u {
************************************************************************/
typedef union ii_iprte1b_u {
- uint64_t ii_iprte1b_regval;
+ u64 ii_iprte1b_regval;
struct {
- uint64_t i_rsvd_1:3;
- uint64_t i_address:47;
- uint64_t i_init:3;
- uint64_t i_source:11;
+ u64 i_rsvd_1:3;
+ u64 i_address:47;
+ u64 i_init:3;
+ u64 i_source:11;
} ii_iprte1b_fld_s;
} ii_iprte1b_u_t;
@@ -1909,12 +1909,12 @@ typedef union ii_iprte1b_u {
************************************************************************/
typedef union ii_iprte2b_u {
- uint64_t ii_iprte2b_regval;
+ u64 ii_iprte2b_regval;
struct {
- uint64_t i_rsvd_1:3;
- uint64_t i_address:47;
- uint64_t i_init:3;
- uint64_t i_source:11;
+ u64 i_rsvd_1:3;
+ u64 i_address:47;
+ u64 i_init:3;
+ u64 i_source:11;
} ii_iprte2b_fld_s;
} ii_iprte2b_u_t;
@@ -1929,12 +1929,12 @@ typedef union ii_iprte2b_u {
************************************************************************/
typedef union ii_iprte3b_u {
- uint64_t ii_iprte3b_regval;
+ u64 ii_iprte3b_regval;
struct {
- uint64_t i_rsvd_1:3;
- uint64_t i_address:47;
- uint64_t i_init:3;
- uint64_t i_source:11;
+ u64 i_rsvd_1:3;
+ u64 i_address:47;
+ u64 i_init:3;
+ u64 i_source:11;
} ii_iprte3b_fld_s;
} ii_iprte3b_u_t;
@@ -1949,12 +1949,12 @@ typedef union ii_iprte3b_u {
************************************************************************/
typedef union ii_iprte4b_u {
- uint64_t ii_iprte4b_regval;
+ u64 ii_iprte4b_regval;
struct {
- uint64_t i_rsvd_1:3;
- uint64_t i_address:47;
- uint64_t i_init:3;
- uint64_t i_source:11;
+ u64 i_rsvd_1:3;
+ u64 i_address:47;
+ u64 i_init:3;
+ u64 i_source:11;
} ii_iprte4b_fld_s;
} ii_iprte4b_u_t;
@@ -1969,12 +1969,12 @@ typedef union ii_iprte4b_u {
************************************************************************/
typedef union ii_iprte5b_u {
- uint64_t ii_iprte5b_regval;
+ u64 ii_iprte5b_regval;
struct {
- uint64_t i_rsvd_1:3;
- uint64_t i_address:47;
- uint64_t i_init:3;
- uint64_t i_source:11;
+ u64 i_rsvd_1:3;
+ u64 i_address:47;
+ u64 i_init:3;
+ u64 i_source:11;
} ii_iprte5b_fld_s;
} ii_iprte5b_u_t;
@@ -1989,12 +1989,12 @@ typedef union ii_iprte5b_u {
************************************************************************/
typedef union ii_iprte6b_u {
- uint64_t ii_iprte6b_regval;
+ u64 ii_iprte6b_regval;
struct {
- uint64_t i_rsvd_1:3;
- uint64_t i_address:47;
- uint64_t i_init:3;
- uint64_t i_source:11;
+ u64 i_rsvd_1:3;
+ u64 i_address:47;
+ u64 i_init:3;
+ u64 i_source:11;
} ii_iprte6b_fld_s;
} ii_iprte6b_u_t;
@@ -2010,12 +2010,12 @@ typedef union ii_iprte6b_u {
************************************************************************/
typedef union ii_iprte7b_u {
- uint64_t ii_iprte7b_regval;
+ u64 ii_iprte7b_regval;
struct {
- uint64_t i_rsvd_1:3;
- uint64_t i_address:47;
- uint64_t i_init:3;
- uint64_t i_source:11;
+ u64 i_rsvd_1:3;
+ u64 i_address:47;
+ u64 i_init:3;
+ u64 i_source:11;
} ii_iprte7b_fld_s;
} ii_iprte7b_u_t;
@@ -2038,13 +2038,13 @@ typedef union ii_iprte7b_u {
************************************************************************/
typedef union ii_ipdr_u {
- uint64_t ii_ipdr_regval;
+ u64 ii_ipdr_regval;
struct {
- uint64_t i_te:3;
- uint64_t i_rsvd_1:1;
- uint64_t i_pnd:1;
- uint64_t i_init_rpcnt:1;
- uint64_t i_rsvd:58;
+ u64 i_te:3;
+ u64 i_rsvd_1:1;
+ u64 i_pnd:1;
+ u64 i_init_rpcnt:1;
+ u64 i_rsvd:58;
} ii_ipdr_fld_s;
} ii_ipdr_u_t;
@@ -2066,11 +2066,11 @@ typedef union ii_ipdr_u {
************************************************************************/
typedef union ii_icdr_u {
- uint64_t ii_icdr_regval;
+ u64 ii_icdr_regval;
struct {
- uint64_t i_crb_num:4;
- uint64_t i_pnd:1;
- uint64_t i_rsvd:59;
+ u64 i_crb_num:4;
+ u64 i_pnd:1;
+ u64 i_rsvd:59;
} ii_icdr_fld_s;
} ii_icdr_u_t;
@@ -2092,13 +2092,13 @@ typedef union ii_icdr_u {
************************************************************************/
typedef union ii_ifdr_u {
- uint64_t ii_ifdr_regval;
+ u64 ii_ifdr_regval;
struct {
- uint64_t i_ioq_max_rq:7;
- uint64_t i_set_ioq_rq:1;
- uint64_t i_ioq_max_rp:7;
- uint64_t i_set_ioq_rp:1;
- uint64_t i_rsvd:48;
+ u64 i_ioq_max_rq:7;
+ u64 i_set_ioq_rq:1;
+ u64 i_ioq_max_rp:7;
+ u64 i_set_ioq_rp:1;
+ u64 i_rsvd:48;
} ii_ifdr_fld_s;
} ii_ifdr_u_t;
@@ -2114,12 +2114,12 @@ typedef union ii_ifdr_u {
************************************************************************/
typedef union ii_iiap_u {
- uint64_t ii_iiap_regval;
+ u64 ii_iiap_regval;
struct {
- uint64_t i_rq_mls:6;
- uint64_t i_rsvd_1:2;
- uint64_t i_rp_mls:6;
- uint64_t i_rsvd:50;
+ u64 i_rq_mls:6;
+ u64 i_rsvd_1:2;
+ u64 i_rp_mls:6;
+ u64 i_rsvd:50;
} ii_iiap_fld_s;
} ii_iiap_u_t;
@@ -2133,22 +2133,22 @@ typedef union ii_iiap_u {
************************************************************************/
typedef union ii_icmr_u {
- uint64_t ii_icmr_regval;
- struct {
- uint64_t i_sp_msg:1;
- uint64_t i_rd_hdr:1;
- uint64_t i_rsvd_4:2;
- uint64_t i_c_cnt:4;
- uint64_t i_rsvd_3:4;
- uint64_t i_clr_rqpd:1;
- uint64_t i_clr_rppd:1;
- uint64_t i_rsvd_2:2;
- uint64_t i_fc_cnt:4;
- uint64_t i_crb_vld:15;
- uint64_t i_crb_mark:15;
- uint64_t i_rsvd_1:2;
- uint64_t i_precise:1;
- uint64_t i_rsvd:11;
+ u64 ii_icmr_regval;
+ struct {
+ u64 i_sp_msg:1;
+ u64 i_rd_hdr:1;
+ u64 i_rsvd_4:2;
+ u64 i_c_cnt:4;
+ u64 i_rsvd_3:4;
+ u64 i_clr_rqpd:1;
+ u64 i_clr_rppd:1;
+ u64 i_rsvd_2:2;
+ u64 i_fc_cnt:4;
+ u64 i_crb_vld:15;
+ u64 i_crb_mark:15;
+ u64 i_rsvd_1:2;
+ u64 i_precise:1;
+ u64 i_rsvd:11;
} ii_icmr_fld_s;
} ii_icmr_u_t;
@@ -2161,13 +2161,13 @@ typedef union ii_icmr_u {
************************************************************************/
typedef union ii_iccr_u {
- uint64_t ii_iccr_regval;
+ u64 ii_iccr_regval;
struct {
- uint64_t i_crb_num:4;
- uint64_t i_rsvd_1:4;
- uint64_t i_cmd:8;
- uint64_t i_pending:1;
- uint64_t i_rsvd:47;
+ u64 i_crb_num:4;
+ u64 i_rsvd_1:4;
+ u64 i_cmd:8;
+ u64 i_pending:1;
+ u64 i_rsvd:47;
} ii_iccr_fld_s;
} ii_iccr_u_t;
@@ -2178,10 +2178,10 @@ typedef union ii_iccr_u {
************************************************************************/
typedef union ii_icto_u {
- uint64_t ii_icto_regval;
+ u64 ii_icto_regval;
struct {
- uint64_t i_timeout:8;
- uint64_t i_rsvd:56;
+ u64 i_timeout:8;
+ u64 i_rsvd:56;
} ii_icto_fld_s;
} ii_icto_u_t;
@@ -2197,10 +2197,10 @@ typedef union ii_icto_u {
************************************************************************/
typedef union ii_ictp_u {
- uint64_t ii_ictp_regval;
+ u64 ii_ictp_regval;
struct {
- uint64_t i_prescale:24;
- uint64_t i_rsvd:40;
+ u64 i_prescale:24;
+ u64 i_rsvd:40;
} ii_ictp_fld_s;
} ii_ictp_u_t;
@@ -2228,14 +2228,14 @@ typedef union ii_ictp_u {
************************************************************************/
typedef union ii_icrb0_a_u {
- uint64_t ii_icrb0_a_regval;
- struct {
- uint64_t ia_iow:1;
- uint64_t ia_vld:1;
- uint64_t ia_addr:47;
- uint64_t ia_tnum:5;
- uint64_t ia_sidn:4;
- uint64_t ia_rsvd:6;
+ u64 ii_icrb0_a_regval;
+ struct {
+ u64 ia_iow:1;
+ u64 ia_vld:1;
+ u64 ia_addr:47;
+ u64 ia_tnum:5;
+ u64 ia_sidn:4;
+ u64 ia_rsvd:6;
} ii_icrb0_a_fld_s;
} ii_icrb0_a_u_t;
@@ -2249,30 +2249,30 @@ typedef union ii_icrb0_a_u {
************************************************************************/
typedef union ii_icrb0_b_u {
- uint64_t ii_icrb0_b_regval;
- struct {
- uint64_t ib_xt_err:1;
- uint64_t ib_mark:1;
- uint64_t ib_ln_uce:1;
- uint64_t ib_errcode:3;
- uint64_t ib_error:1;
- uint64_t ib_stall__bte_1:1;
- uint64_t ib_stall__bte_0:1;
- uint64_t ib_stall__intr:1;
- uint64_t ib_stall_ib:1;
- uint64_t ib_intvn:1;
- uint64_t ib_wb:1;
- uint64_t ib_hold:1;
- uint64_t ib_ack:1;
- uint64_t ib_resp:1;
- uint64_t ib_ack_cnt:11;
- uint64_t ib_rsvd:7;
- uint64_t ib_exc:5;
- uint64_t ib_init:3;
- uint64_t ib_imsg:8;
- uint64_t ib_imsgtype:2;
- uint64_t ib_use_old:1;
- uint64_t ib_rsvd_1:11;
+ u64 ii_icrb0_b_regval;
+ struct {
+ u64 ib_xt_err:1;
+ u64 ib_mark:1;
+ u64 ib_ln_uce:1;
+ u64 ib_errcode:3;
+ u64 ib_error:1;
+ u64 ib_stall__bte_1:1;
+ u64 ib_stall__bte_0:1;
+ u64 ib_stall__intr:1;
+ u64 ib_stall_ib:1;
+ u64 ib_intvn:1;
+ u64 ib_wb:1;
+ u64 ib_hold:1;
+ u64 ib_ack:1;
+ u64 ib_resp:1;
+ u64 ib_ack_cnt:11;
+ u64 ib_rsvd:7;
+ u64 ib_exc:5;
+ u64 ib_init:3;
+ u64 ib_imsg:8;
+ u64 ib_imsgtype:2;
+ u64 ib_use_old:1;
+ u64 ib_rsvd_1:11;
} ii_icrb0_b_fld_s;
} ii_icrb0_b_u_t;
@@ -2286,17 +2286,17 @@ typedef union ii_icrb0_b_u {
************************************************************************/
typedef union ii_icrb0_c_u {
- uint64_t ii_icrb0_c_regval;
- struct {
- uint64_t ic_source:15;
- uint64_t ic_size:2;
- uint64_t ic_ct:1;
- uint64_t ic_bte_num:1;
- uint64_t ic_gbr:1;
- uint64_t ic_resprqd:1;
- uint64_t ic_bo:1;
- uint64_t ic_suppl:15;
- uint64_t ic_rsvd:27;
+ u64 ii_icrb0_c_regval;
+ struct {
+ u64 ic_source:15;
+ u64 ic_size:2;
+ u64 ic_ct:1;
+ u64 ic_bte_num:1;
+ u64 ic_gbr:1;
+ u64 ic_resprqd:1;
+ u64 ic_bo:1;
+ u64 ic_suppl:15;
+ u64 ic_rsvd:27;
} ii_icrb0_c_fld_s;
} ii_icrb0_c_u_t;
@@ -2310,14 +2310,14 @@ typedef union ii_icrb0_c_u {
************************************************************************/
typedef union ii_icrb0_d_u {
- uint64_t ii_icrb0_d_regval;
- struct {
- uint64_t id_pa_be:43;
- uint64_t id_bte_op:1;
- uint64_t id_pr_psc:4;
- uint64_t id_pr_cnt:4;
- uint64_t id_sleep:1;
- uint64_t id_rsvd:11;
+ u64 ii_icrb0_d_regval;
+ struct {
+ u64 id_pa_be:43;
+ u64 id_bte_op:1;
+ u64 id_pr_psc:4;
+ u64 id_pr_cnt:4;
+ u64 id_sleep:1;
+ u64 id_rsvd:11;
} ii_icrb0_d_fld_s;
} ii_icrb0_d_u_t;
@@ -2331,14 +2331,14 @@ typedef union ii_icrb0_d_u {
************************************************************************/
typedef union ii_icrb0_e_u {
- uint64_t ii_icrb0_e_regval;
- struct {
- uint64_t ie_timeout:8;
- uint64_t ie_context:15;
- uint64_t ie_rsvd:1;
- uint64_t ie_tvld:1;
- uint64_t ie_cvld:1;
- uint64_t ie_rsvd_0:38;
+ u64 ii_icrb0_e_regval;
+ struct {
+ u64 ie_timeout:8;
+ u64 ie_context:15;
+ u64 ie_rsvd:1;
+ u64 ie_tvld:1;
+ u64 ie_cvld:1;
+ u64 ie_rsvd_0:38;
} ii_icrb0_e_fld_s;
} ii_icrb0_e_u_t;
@@ -2351,12 +2351,12 @@ typedef union ii_icrb0_e_u {
************************************************************************/
typedef union ii_icsml_u {
- uint64_t ii_icsml_regval;
+ u64 ii_icsml_regval;
struct {
- uint64_t i_tt_addr:47;
- uint64_t i_newsuppl_ex:14;
- uint64_t i_reserved:2;
- uint64_t i_overflow:1;
+ u64 i_tt_addr:47;
+ u64 i_newsuppl_ex:14;
+ u64 i_reserved:2;
+ u64 i_overflow:1;
} ii_icsml_fld_s;
} ii_icsml_u_t;
@@ -2369,10 +2369,10 @@ typedef union ii_icsml_u {
************************************************************************/
typedef union ii_icsmm_u {
- uint64_t ii_icsmm_regval;
+ u64 ii_icsmm_regval;
struct {
- uint64_t i_tt_ack_cnt:11;
- uint64_t i_reserved:53;
+ u64 i_tt_ack_cnt:11;
+ u64 i_reserved:53;
} ii_icsmm_fld_s;
} ii_icsmm_u_t;
@@ -2385,48 +2385,48 @@ typedef union ii_icsmm_u {
************************************************************************/
typedef union ii_icsmh_u {
- uint64_t ii_icsmh_regval;
- struct {
- uint64_t i_tt_vld:1;
- uint64_t i_xerr:1;
- uint64_t i_ft_cwact_o:1;
- uint64_t i_ft_wact_o:1;
- uint64_t i_ft_active_o:1;
- uint64_t i_sync:1;
- uint64_t i_mnusg:1;
- uint64_t i_mnusz:1;
- uint64_t i_plusz:1;
- uint64_t i_plusg:1;
- uint64_t i_tt_exc:5;
- uint64_t i_tt_wb:1;
- uint64_t i_tt_hold:1;
- uint64_t i_tt_ack:1;
- uint64_t i_tt_resp:1;
- uint64_t i_tt_intvn:1;
- uint64_t i_g_stall_bte1:1;
- uint64_t i_g_stall_bte0:1;
- uint64_t i_g_stall_il:1;
- uint64_t i_g_stall_ib:1;
- uint64_t i_tt_imsg:8;
- uint64_t i_tt_imsgtype:2;
- uint64_t i_tt_use_old:1;
- uint64_t i_tt_respreqd:1;
- uint64_t i_tt_bte_num:1;
- uint64_t i_cbn:1;
- uint64_t i_match:1;
- uint64_t i_rpcnt_lt_34:1;
- uint64_t i_rpcnt_ge_34:1;
- uint64_t i_rpcnt_lt_18:1;
- uint64_t i_rpcnt_ge_18:1;
- uint64_t i_rpcnt_lt_2:1;
- uint64_t i_rpcnt_ge_2:1;
- uint64_t i_rqcnt_lt_18:1;
- uint64_t i_rqcnt_ge_18:1;
- uint64_t i_rqcnt_lt_2:1;
- uint64_t i_rqcnt_ge_2:1;
- uint64_t i_tt_device:7;
- uint64_t i_tt_init:3;
- uint64_t i_reserved:5;
+ u64 ii_icsmh_regval;
+ struct {
+ u64 i_tt_vld:1;
+ u64 i_xerr:1;
+ u64 i_ft_cwact_o:1;
+ u64 i_ft_wact_o:1;
+ u64 i_ft_active_o:1;
+ u64 i_sync:1;
+ u64 i_mnusg:1;
+ u64 i_mnusz:1;
+ u64 i_plusz:1;
+ u64 i_plusg:1;
+ u64 i_tt_exc:5;
+ u64 i_tt_wb:1;
+ u64 i_tt_hold:1;
+ u64 i_tt_ack:1;
+ u64 i_tt_resp:1;
+ u64 i_tt_intvn:1;
+ u64 i_g_stall_bte1:1;
+ u64 i_g_stall_bte0:1;
+ u64 i_g_stall_il:1;
+ u64 i_g_stall_ib:1;
+ u64 i_tt_imsg:8;
+ u64 i_tt_imsgtype:2;
+ u64 i_tt_use_old:1;
+ u64 i_tt_respreqd:1;
+ u64 i_tt_bte_num:1;
+ u64 i_cbn:1;
+ u64 i_match:1;
+ u64 i_rpcnt_lt_34:1;
+ u64 i_rpcnt_ge_34:1;
+ u64 i_rpcnt_lt_18:1;
+ u64 i_rpcnt_ge_18:1;
+ u64 i_rpcnt_lt_2:1;
+ u64 i_rpcnt_ge_2:1;
+ u64 i_rqcnt_lt_18:1;
+ u64 i_rqcnt_ge_18:1;
+ u64 i_rqcnt_lt_2:1;
+ u64 i_rqcnt_ge_2:1;
+ u64 i_tt_device:7;
+ u64 i_tt_init:3;
+ u64 i_reserved:5;
} ii_icsmh_fld_s;
} ii_icsmh_u_t;
@@ -2439,14 +2439,14 @@ typedef union ii_icsmh_u {
************************************************************************/
typedef union ii_idbss_u {
- uint64_t ii_idbss_regval;
- struct {
- uint64_t i_iioclk_core_submenu:3;
- uint64_t i_rsvd:5;
- uint64_t i_fsbclk_wrapper_submenu:3;
- uint64_t i_rsvd_1:5;
- uint64_t i_iioclk_menu:5;
- uint64_t i_rsvd_2:43;
+ u64 ii_idbss_regval;
+ struct {
+ u64 i_iioclk_core_submenu:3;
+ u64 i_rsvd:5;
+ u64 i_fsbclk_wrapper_submenu:3;
+ u64 i_rsvd_1:5;
+ u64 i_iioclk_menu:5;
+ u64 i_rsvd_2:43;
} ii_idbss_fld_s;
} ii_idbss_u_t;
@@ -2466,13 +2466,13 @@ typedef union ii_idbss_u {
************************************************************************/
typedef union ii_ibls0_u {
- uint64_t ii_ibls0_regval;
+ u64 ii_ibls0_regval;
struct {
- uint64_t i_length:16;
- uint64_t i_error:1;
- uint64_t i_rsvd_1:3;
- uint64_t i_busy:1;
- uint64_t i_rsvd:43;
+ u64 i_length:16;
+ u64 i_error:1;
+ u64 i_rsvd_1:3;
+ u64 i_busy:1;
+ u64 i_rsvd:43;
} ii_ibls0_fld_s;
} ii_ibls0_u_t;
@@ -2487,11 +2487,11 @@ typedef union ii_ibls0_u {
************************************************************************/
typedef union ii_ibsa0_u {
- uint64_t ii_ibsa0_regval;
+ u64 ii_ibsa0_regval;
struct {
- uint64_t i_rsvd_1:7;
- uint64_t i_addr:42;
- uint64_t i_rsvd:15;
+ u64 i_rsvd_1:7;
+ u64 i_addr:42;
+ u64 i_rsvd:15;
} ii_ibsa0_fld_s;
} ii_ibsa0_u_t;
@@ -2506,11 +2506,11 @@ typedef union ii_ibsa0_u {
************************************************************************/
typedef union ii_ibda0_u {
- uint64_t ii_ibda0_regval;
+ u64 ii_ibda0_regval;
struct {
- uint64_t i_rsvd_1:7;
- uint64_t i_addr:42;
- uint64_t i_rsvd:15;
+ u64 i_rsvd_1:7;
+ u64 i_addr:42;
+ u64 i_rsvd:15;
} ii_ibda0_fld_s;
} ii_ibda0_u_t;
@@ -2527,14 +2527,14 @@ typedef union ii_ibda0_u {
************************************************************************/
typedef union ii_ibct0_u {
- uint64_t ii_ibct0_regval;
- struct {
- uint64_t i_zerofill:1;
- uint64_t i_rsvd_2:3;
- uint64_t i_notify:1;
- uint64_t i_rsvd_1:3;
- uint64_t i_poison:1;
- uint64_t i_rsvd:55;
+ u64 ii_ibct0_regval;
+ struct {
+ u64 i_zerofill:1;
+ u64 i_rsvd_2:3;
+ u64 i_notify:1;
+ u64 i_rsvd_1:3;
+ u64 i_poison:1;
+ u64 i_rsvd:55;
} ii_ibct0_fld_s;
} ii_ibct0_u_t;
@@ -2546,11 +2546,11 @@ typedef union ii_ibct0_u {
************************************************************************/
typedef union ii_ibna0_u {
- uint64_t ii_ibna0_regval;
+ u64 ii_ibna0_regval;
struct {
- uint64_t i_rsvd_1:7;
- uint64_t i_addr:42;
- uint64_t i_rsvd:15;
+ u64 i_rsvd_1:7;
+ u64 i_addr:42;
+ u64 i_rsvd:15;
} ii_ibna0_fld_s;
} ii_ibna0_u_t;
@@ -2563,13 +2563,13 @@ typedef union ii_ibna0_u {
************************************************************************/
typedef union ii_ibia0_u {
- uint64_t ii_ibia0_regval;
+ u64 ii_ibia0_regval;
struct {
- uint64_t i_rsvd_2:1;
- uint64_t i_node_id:11;
- uint64_t i_rsvd_1:4;
- uint64_t i_level:7;
- uint64_t i_rsvd:41;
+ u64 i_rsvd_2:1;
+ u64 i_node_id:11;
+ u64 i_rsvd_1:4;
+ u64 i_level:7;
+ u64 i_rsvd:41;
} ii_ibia0_fld_s;
} ii_ibia0_u_t;
@@ -2589,13 +2589,13 @@ typedef union ii_ibia0_u {
************************************************************************/
typedef union ii_ibls1_u {
- uint64_t ii_ibls1_regval;
+ u64 ii_ibls1_regval;
struct {
- uint64_t i_length:16;
- uint64_t i_error:1;
- uint64_t i_rsvd_1:3;
- uint64_t i_busy:1;
- uint64_t i_rsvd:43;
+ u64 i_length:16;
+ u64 i_error:1;
+ u64 i_rsvd_1:3;
+ u64 i_busy:1;
+ u64 i_rsvd:43;
} ii_ibls1_fld_s;
} ii_ibls1_u_t;
@@ -2610,11 +2610,11 @@ typedef union ii_ibls1_u {
************************************************************************/
typedef union ii_ibsa1_u {
- uint64_t ii_ibsa1_regval;
+ u64 ii_ibsa1_regval;
struct {
- uint64_t i_rsvd_1:7;
- uint64_t i_addr:33;
- uint64_t i_rsvd:24;
+ u64 i_rsvd_1:7;
+ u64 i_addr:33;
+ u64 i_rsvd:24;
} ii_ibsa1_fld_s;
} ii_ibsa1_u_t;
@@ -2629,11 +2629,11 @@ typedef union ii_ibsa1_u {
************************************************************************/
typedef union ii_ibda1_u {
- uint64_t ii_ibda1_regval;
+ u64 ii_ibda1_regval;
struct {
- uint64_t i_rsvd_1:7;
- uint64_t i_addr:33;
- uint64_t i_rsvd:24;
+ u64 i_rsvd_1:7;
+ u64 i_addr:33;
+ u64 i_rsvd:24;
} ii_ibda1_fld_s;
} ii_ibda1_u_t;
@@ -2650,14 +2650,14 @@ typedef union ii_ibda1_u {
************************************************************************/
typedef union ii_ibct1_u {
- uint64_t ii_ibct1_regval;
- struct {
- uint64_t i_zerofill:1;
- uint64_t i_rsvd_2:3;
- uint64_t i_notify:1;
- uint64_t i_rsvd_1:3;
- uint64_t i_poison:1;
- uint64_t i_rsvd:55;
+ u64 ii_ibct1_regval;
+ struct {
+ u64 i_zerofill:1;
+ u64 i_rsvd_2:3;
+ u64 i_notify:1;
+ u64 i_rsvd_1:3;
+ u64 i_poison:1;
+ u64 i_rsvd:55;
} ii_ibct1_fld_s;
} ii_ibct1_u_t;
@@ -2669,11 +2669,11 @@ typedef union ii_ibct1_u {
************************************************************************/
typedef union ii_ibna1_u {
- uint64_t ii_ibna1_regval;
+ u64 ii_ibna1_regval;
struct {
- uint64_t i_rsvd_1:7;
- uint64_t i_addr:33;
- uint64_t i_rsvd:24;
+ u64 i_rsvd_1:7;
+ u64 i_addr:33;
+ u64 i_rsvd:24;
} ii_ibna1_fld_s;
} ii_ibna1_u_t;
@@ -2686,13 +2686,13 @@ typedef union ii_ibna1_u {
************************************************************************/
typedef union ii_ibia1_u {
- uint64_t ii_ibia1_regval;
+ u64 ii_ibia1_regval;
struct {
- uint64_t i_pi_id:1;
- uint64_t i_node_id:8;
- uint64_t i_rsvd_1:7;
- uint64_t i_level:7;
- uint64_t i_rsvd:41;
+ u64 i_pi_id:1;
+ u64 i_node_id:8;
+ u64 i_rsvd_1:7;
+ u64 i_level:7;
+ u64 i_rsvd:41;
} ii_ibia1_fld_s;
} ii_ibia1_u_t;
@@ -2712,12 +2712,12 @@ typedef union ii_ibia1_u {
************************************************************************/
typedef union ii_ipcr_u {
- uint64_t ii_ipcr_regval;
+ u64 ii_ipcr_regval;
struct {
- uint64_t i_ippr0_c:4;
- uint64_t i_ippr1_c:4;
- uint64_t i_icct:8;
- uint64_t i_rsvd:48;
+ u64 i_ippr0_c:4;
+ u64 i_ippr1_c:4;
+ u64 i_icct:8;
+ u64 i_rsvd:48;
} ii_ipcr_fld_s;
} ii_ipcr_u_t;
@@ -2728,10 +2728,10 @@ typedef union ii_ipcr_u {
************************************************************************/
typedef union ii_ippr_u {
- uint64_t ii_ippr_regval;
+ u64 ii_ippr_regval;
struct {
- uint64_t i_ippr0:32;
- uint64_t i_ippr1:32;
+ u64 i_ippr0:32;
+ u64 i_ippr1:32;
} ii_ippr_fld_s;
} ii_ippr_u_t;
@@ -3267,15 +3267,15 @@ typedef ii_icrb0_e_u_t icrbe_t;
#define IO_PERF_SETS 32
/* Bit for the widget in inbound access register */
-#define IIO_IIWA_WIDGET(_w) ((uint64_t)(1ULL << _w))
+#define IIO_IIWA_WIDGET(_w) ((u64)(1ULL << _w))
/* Bit for the widget in outbound access register */
-#define IIO_IOWA_WIDGET(_w) ((uint64_t)(1ULL << _w))
+#define IIO_IOWA_WIDGET(_w) ((u64)(1ULL << _w))
/* NOTE: The following define assumes that we are going to get
* widget numbers from 8 thru F and the device numbers within
* widget from 0 thru 7.
*/
-#define IIO_IIDEM_WIDGETDEV_MASK(w, d) ((uint64_t)(1ULL << (8 * ((w) - 8) + (d))))
+#define IIO_IIDEM_WIDGETDEV_MASK(w, d) ((u64)(1ULL << (8 * ((w) - 8) + (d))))
/* IO Interrupt Destination Register */
#define IIO_IIDSR_SENT_SHIFT 28
@@ -3302,9 +3302,9 @@ typedef ii_icrb0_e_u_t icrbe_t;
*/
typedef union hubii_wcr_u {
- uint64_t wcr_reg_value;
+ u64 wcr_reg_value;
struct {
- uint64_t wcr_widget_id:4, /* LLP crossbar credit */
+ u64 wcr_widget_id:4, /* LLP crossbar credit */
wcr_tag_mode:1, /* Tag mode */
wcr_rsvd1:8, /* Reserved */
wcr_xbar_crd:3, /* LLP crossbar credit */
@@ -3324,9 +3324,9 @@ performance registers */
performed */
typedef union io_perf_sel {
- uint64_t perf_sel_reg;
+ u64 perf_sel_reg;
struct {
- uint64_t perf_ippr0:4, perf_ippr1:4, perf_icct:8, perf_rsvd:48;
+ u64 perf_ippr0:4, perf_ippr1:4, perf_icct:8, perf_rsvd:48;
} perf_sel_bits;
} io_perf_sel_t;
@@ -3334,24 +3334,24 @@ typedef union io_perf_sel {
hardware problems there is only one counter, not two. */
typedef union io_perf_cnt {
- uint64_t perf_cnt;
+ u64 perf_cnt;
struct {
- uint64_t perf_cnt:20, perf_rsvd2:12, perf_rsvd1:32;
+ u64 perf_cnt:20, perf_rsvd2:12, perf_rsvd1:32;
} perf_cnt_bits;
} io_perf_cnt_t;
typedef union iprte_a {
- uint64_t entry;
- struct {
- uint64_t i_rsvd_1:3;
- uint64_t i_addr:38;
- uint64_t i_init:3;
- uint64_t i_source:8;
- uint64_t i_rsvd:2;
- uint64_t i_widget:4;
- uint64_t i_to_cnt:5;
- uint64_t i_vld:1;
+ u64 entry;
+ struct {
+ u64 i_rsvd_1:3;
+ u64 i_addr:38;
+ u64 i_init:3;
+ u64 i_source:8;
+ u64 i_rsvd:2;
+ u64 i_widget:4;
+ u64 i_to_cnt:5;
+ u64 i_vld:1;
} iprte_fields;
} iprte_a_t;
diff --git a/include/asm-ia64/sn/sn_sal.h b/include/asm-ia64/sn/sn_sal.h
index 8b9e10e7cdba..e77f0c9b7d3d 100644
--- a/include/asm-ia64/sn/sn_sal.h
+++ b/include/asm-ia64/sn/sn_sal.h
@@ -273,7 +273,7 @@ ia64_sn_console_putc(char ch)
ret_stuff.v0 = 0;
ret_stuff.v1 = 0;
ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTC, (uint64_t)ch, 0, 0, 0, 0, 0, 0);
+ SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTC, (u64)ch, 0, 0, 0, 0, 0, 0);
return ret_stuff.status;
}
@@ -290,7 +290,7 @@ ia64_sn_console_putb(const char *buf, int len)
ret_stuff.v0 = 0;
ret_stuff.v1 = 0;
ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTB, (uint64_t)buf, (uint64_t)len, 0, 0, 0, 0, 0);
+ SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTB, (u64)buf, (u64)len, 0, 0, 0, 0, 0);
if ( ret_stuff.status == 0 ) {
return ret_stuff.v0;
@@ -310,7 +310,7 @@ ia64_sn_plat_specific_err_print(int (*hook)(const char*, ...), char *rec)
ret_stuff.v0 = 0;
ret_stuff.v1 = 0;
ret_stuff.v2 = 0;
- SAL_CALL_REENTRANT(ret_stuff, SN_SAL_PRINT_ERROR, (uint64_t)hook, (uint64_t)rec, 0, 0, 0, 0, 0);
+ SAL_CALL_REENTRANT(ret_stuff, SN_SAL_PRINT_ERROR, (u64)hook, (u64)rec, 0, 0, 0, 0, 0);
return ret_stuff.status;
}
@@ -398,7 +398,7 @@ ia64_sn_console_intr_status(void)
* Enable an interrupt on the SAL console device.
*/
static inline void
-ia64_sn_console_intr_enable(uint64_t intr)
+ia64_sn_console_intr_enable(u64 intr)
{
struct ia64_sal_retval ret_stuff;
@@ -415,7 +415,7 @@ ia64_sn_console_intr_enable(uint64_t intr)
* Disable an interrupt on the SAL console device.
*/
static inline void
-ia64_sn_console_intr_disable(uint64_t intr)
+ia64_sn_console_intr_disable(u64 intr)
{
struct ia64_sal_retval ret_stuff;
@@ -441,7 +441,7 @@ ia64_sn_console_xmit_chars(char *buf, int len)
ret_stuff.v1 = 0;
ret_stuff.v2 = 0;
SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_XMIT_CHARS,
- (uint64_t)buf, (uint64_t)len,
+ (u64)buf, (u64)len,
0, 0, 0, 0, 0);
if (ret_stuff.status == 0) {
diff --git a/include/asm-ia64/sn/tioca.h b/include/asm-ia64/sn/tioca.h
index bc1aacfb9483..666222d7f0f6 100644
--- a/include/asm-ia64/sn/tioca.h
+++ b/include/asm-ia64/sn/tioca.h
@@ -19,47 +19,47 @@
*/
struct tioca {
- uint64_t ca_id; /* 0x000000 */
- uint64_t ca_control1; /* 0x000008 */
- uint64_t ca_control2; /* 0x000010 */
- uint64_t ca_status1; /* 0x000018 */
- uint64_t ca_status2; /* 0x000020 */
- uint64_t ca_gart_aperature; /* 0x000028 */
- uint64_t ca_gfx_detach; /* 0x000030 */
- uint64_t ca_inta_dest_addr; /* 0x000038 */
- uint64_t ca_intb_dest_addr; /* 0x000040 */
- uint64_t ca_err_int_dest_addr; /* 0x000048 */
- uint64_t ca_int_status; /* 0x000050 */
- uint64_t ca_int_status_alias; /* 0x000058 */
- uint64_t ca_mult_error; /* 0x000060 */
- uint64_t ca_mult_error_alias; /* 0x000068 */
- uint64_t ca_first_error; /* 0x000070 */
- uint64_t ca_int_mask; /* 0x000078 */
- uint64_t ca_crm_pkterr_type; /* 0x000080 */
- uint64_t ca_crm_pkterr_type_alias; /* 0x000088 */
- uint64_t ca_crm_ct_error_detail_1; /* 0x000090 */
- uint64_t ca_crm_ct_error_detail_2; /* 0x000098 */
- uint64_t ca_crm_tnumto; /* 0x0000A0 */
- uint64_t ca_gart_err; /* 0x0000A8 */
- uint64_t ca_pcierr_type; /* 0x0000B0 */
- uint64_t ca_pcierr_addr; /* 0x0000B8 */
-
- uint64_t ca_pad_0000C0[3]; /* 0x0000{C0..D0} */
-
- uint64_t ca_pci_rd_buf_flush; /* 0x0000D8 */
- uint64_t ca_pci_dma_addr_extn; /* 0x0000E0 */
- uint64_t ca_agp_dma_addr_extn; /* 0x0000E8 */
- uint64_t ca_force_inta; /* 0x0000F0 */
- uint64_t ca_force_intb; /* 0x0000F8 */
- uint64_t ca_debug_vector_sel; /* 0x000100 */
- uint64_t ca_debug_mux_core_sel; /* 0x000108 */
- uint64_t ca_debug_mux_pci_sel; /* 0x000110 */
- uint64_t ca_debug_domain_sel; /* 0x000118 */
-
- uint64_t ca_pad_000120[28]; /* 0x0001{20..F8} */
-
- uint64_t ca_gart_ptr_table; /* 0x200 */
- uint64_t ca_gart_tlb_addr[8]; /* 0x2{08..40} */
+ u64 ca_id; /* 0x000000 */
+ u64 ca_control1; /* 0x000008 */
+ u64 ca_control2; /* 0x000010 */
+ u64 ca_status1; /* 0x000018 */
+ u64 ca_status2; /* 0x000020 */
+ u64 ca_gart_aperature; /* 0x000028 */
+ u64 ca_gfx_detach; /* 0x000030 */
+ u64 ca_inta_dest_addr; /* 0x000038 */
+ u64 ca_intb_dest_addr; /* 0x000040 */
+ u64 ca_err_int_dest_addr; /* 0x000048 */
+ u64 ca_int_status; /* 0x000050 */
+ u64 ca_int_status_alias; /* 0x000058 */
+ u64 ca_mult_error; /* 0x000060 */
+ u64 ca_mult_error_alias; /* 0x000068 */
+ u64 ca_first_error; /* 0x000070 */
+ u64 ca_int_mask; /* 0x000078 */
+ u64 ca_crm_pkterr_type; /* 0x000080 */
+ u64 ca_crm_pkterr_type_alias; /* 0x000088 */
+ u64 ca_crm_ct_error_detail_1; /* 0x000090 */
+ u64 ca_crm_ct_error_detail_2; /* 0x000098 */
+ u64 ca_crm_tnumto; /* 0x0000A0 */
+ u64 ca_gart_err; /* 0x0000A8 */
+ u64 ca_pcierr_type; /* 0x0000B0 */
+ u64 ca_pcierr_addr; /* 0x0000B8 */
+
+ u64 ca_pad_0000C0[3]; /* 0x0000{C0..D0} */
+
+ u64 ca_pci_rd_buf_flush; /* 0x0000D8 */
+ u64 ca_pci_dma_addr_extn; /* 0x0000E0 */
+ u64 ca_agp_dma_addr_extn; /* 0x0000E8 */
+ u64 ca_force_inta; /* 0x0000F0 */
+ u64 ca_force_intb; /* 0x0000F8 */
+ u64 ca_debug_vector_sel; /* 0x000100 */
+ u64 ca_debug_mux_core_sel; /* 0x000108 */
+ u64 ca_debug_mux_pci_sel; /* 0x000110 */
+ u64 ca_debug_domain_sel; /* 0x000118 */
+
+ u64 ca_pad_000120[28]; /* 0x0001{20..F8} */
+
+ u64 ca_gart_ptr_table; /* 0x200 */
+ u64 ca_gart_tlb_addr[8]; /* 0x2{08..40} */
};
/*
diff --git a/include/asm-ia64/sn/tioca_provider.h b/include/asm-ia64/sn/tioca_provider.h
index b532ef6148ed..ab7fe2463468 100644
--- a/include/asm-ia64/sn/tioca_provider.h
+++ b/include/asm-ia64/sn/tioca_provider.h
@@ -56,31 +56,31 @@ struct tioca_kernel {
/*
* General GART stuff
*/
- uint64_t ca_ap_size; /* size of aperature in bytes */
- uint32_t ca_gart_entries; /* # uint64_t entries in gart */
- uint32_t ca_ap_pagesize; /* aperature page size in bytes */
- uint64_t ca_ap_bus_base; /* bus address of CA aperature */
- uint64_t ca_gart_size; /* gart size in bytes */
- uint64_t *ca_gart; /* gart table vaddr */
- uint64_t ca_gart_coretalk_addr; /* gart coretalk addr */
- uint8_t ca_gart_iscoherent; /* used in tioca_tlbflush */
+ u64 ca_ap_size; /* size of aperature in bytes */
+ u32 ca_gart_entries; /* # u64 entries in gart */
+ u32 ca_ap_pagesize; /* aperature page size in bytes */
+ u64 ca_ap_bus_base; /* bus address of CA aperature */
+ u64 ca_gart_size; /* gart size in bytes */
+ u64 *ca_gart; /* gart table vaddr */
+ u64 ca_gart_coretalk_addr; /* gart coretalk addr */
+ u8 ca_gart_iscoherent; /* used in tioca_tlbflush */
/* PCI GART convenience values */
- uint64_t ca_pciap_base; /* pci aperature bus base address */
- uint64_t ca_pciap_size; /* pci aperature size (bytes) */
- uint64_t ca_pcigart_base; /* gfx GART bus base address */
- uint64_t *ca_pcigart; /* gfx GART vm address */
- uint32_t ca_pcigart_entries;
- uint32_t ca_pcigart_start; /* PCI start index in ca_gart */
+ u64 ca_pciap_base; /* pci aperature bus base address */
+ u64 ca_pciap_size; /* pci aperature size (bytes) */
+ u64 ca_pcigart_base; /* gfx GART bus base address */
+ u64 *ca_pcigart; /* gfx GART vm address */
+ u32 ca_pcigart_entries;
+ u32 ca_pcigart_start; /* PCI start index in ca_gart */
void *ca_pcigart_pagemap;
/* AGP GART convenience values */
- uint64_t ca_gfxap_base; /* gfx aperature bus base address */
- uint64_t ca_gfxap_size; /* gfx aperature size (bytes) */
- uint64_t ca_gfxgart_base; /* gfx GART bus base address */
- uint64_t *ca_gfxgart; /* gfx GART vm address */
- uint32_t ca_gfxgart_entries;
- uint32_t ca_gfxgart_start; /* agpgart start index in ca_gart */
+ u64 ca_gfxap_base; /* gfx aperature bus base address */
+ u64 ca_gfxap_size; /* gfx aperature size (bytes) */
+ u64 ca_gfxgart_base; /* gfx GART bus base address */
+ u64 *ca_gfxgart; /* gfx GART vm address */
+ u32 ca_gfxgart_entries;
+ u32 ca_gfxgart_start; /* agpgart start index in ca_gart */
};
/*
@@ -93,11 +93,11 @@ struct tioca_kernel {
struct tioca_common {
struct pcibus_bussoft ca_common; /* common pciio header */
- uint32_t ca_rev;
- uint32_t ca_closest_nasid;
+ u32 ca_rev;
+ u32 ca_closest_nasid;
- uint64_t ca_prom_private;
- uint64_t ca_kernel_private;
+ u64 ca_prom_private;
+ u64 ca_kernel_private;
};
/**
@@ -139,9 +139,9 @@ tioca_paddr_to_gart(unsigned long paddr)
*/
static inline unsigned long
-tioca_physpage_to_gart(uint64_t page_addr)
+tioca_physpage_to_gart(u64 page_addr)
{
- uint64_t coretalk_addr;
+ u64 coretalk_addr;
coretalk_addr = PHYS_TO_TIODMA(page_addr);
if (!coretalk_addr) {
@@ -161,7 +161,7 @@ tioca_physpage_to_gart(uint64_t page_addr)
static inline void
tioca_tlbflush(struct tioca_kernel *tioca_kernel)
{
- volatile uint64_t tmp;
+ volatile u64 tmp;
volatile struct tioca *ca_base;
struct tioca_common *tioca_common;
@@ -200,7 +200,7 @@ tioca_tlbflush(struct tioca_kernel *tioca_kernel)
tmp = __sn_readq_relaxed(&ca_base->ca_control2);
}
-extern uint32_t tioca_gart_found;
+extern u32 tioca_gart_found;
extern struct list_head tioca_list;
extern int tioca_init_provider(void);
extern void tioca_fastwrite_enable(struct tioca_kernel *tioca_kern);
diff --git a/include/asm-ia64/sn/tioce.h b/include/asm-ia64/sn/tioce.h
index ecaddf960086..d4c990712eac 100644
--- a/include/asm-ia64/sn/tioce.h
+++ b/include/asm-ia64/sn/tioce.h
@@ -35,72 +35,72 @@ typedef volatile struct tioce {
/*
* ADMIN : Administration Registers
*/
- uint64_t ce_adm_id; /* 0x000000 */
- uint64_t ce_pad_000008; /* 0x000008 */
- uint64_t ce_adm_dyn_credit_status; /* 0x000010 */
- uint64_t ce_adm_last_credit_status; /* 0x000018 */
- uint64_t ce_adm_credit_limit; /* 0x000020 */
- uint64_t ce_adm_force_credit; /* 0x000028 */
- uint64_t ce_adm_control; /* 0x000030 */
- uint64_t ce_adm_mmr_chn_timeout; /* 0x000038 */
- uint64_t ce_adm_ssp_ure_timeout; /* 0x000040 */
- uint64_t ce_adm_ssp_dre_timeout; /* 0x000048 */
- uint64_t ce_adm_ssp_debug_sel; /* 0x000050 */
- uint64_t ce_adm_int_status; /* 0x000058 */
- uint64_t ce_adm_int_status_alias; /* 0x000060 */
- uint64_t ce_adm_int_mask; /* 0x000068 */
- uint64_t ce_adm_int_pending; /* 0x000070 */
- uint64_t ce_adm_force_int; /* 0x000078 */
- uint64_t ce_adm_ure_ups_buf_barrier_flush; /* 0x000080 */
- uint64_t ce_adm_int_dest[15]; /* 0x000088 -- 0x0000F8 */
- uint64_t ce_adm_error_summary; /* 0x000100 */
- uint64_t ce_adm_error_summary_alias; /* 0x000108 */
- uint64_t ce_adm_error_mask; /* 0x000110 */
- uint64_t ce_adm_first_error; /* 0x000118 */
- uint64_t ce_adm_error_overflow; /* 0x000120 */
- uint64_t ce_adm_error_overflow_alias; /* 0x000128 */
- uint64_t ce_pad_000130[2]; /* 0x000130 -- 0x000138 */
- uint64_t ce_adm_tnum_error; /* 0x000140 */
- uint64_t ce_adm_mmr_err_detail; /* 0x000148 */
- uint64_t ce_adm_msg_sram_perr_detail; /* 0x000150 */
- uint64_t ce_adm_bap_sram_perr_detail; /* 0x000158 */
- uint64_t ce_adm_ce_sram_perr_detail; /* 0x000160 */
- uint64_t ce_adm_ce_credit_oflow_detail; /* 0x000168 */
- uint64_t ce_adm_tx_link_idle_max_timer; /* 0x000170 */
- uint64_t ce_adm_pcie_debug_sel; /* 0x000178 */
- uint64_t ce_pad_000180[16]; /* 0x000180 -- 0x0001F8 */
-
- uint64_t ce_adm_pcie_debug_sel_top; /* 0x000200 */
- uint64_t ce_adm_pcie_debug_lat_sel_lo_top; /* 0x000208 */
- uint64_t ce_adm_pcie_debug_lat_sel_hi_top; /* 0x000210 */
- uint64_t ce_adm_pcie_debug_trig_sel_top; /* 0x000218 */
- uint64_t ce_adm_pcie_debug_trig_lat_sel_lo_top; /* 0x000220 */
- uint64_t ce_adm_pcie_debug_trig_lat_sel_hi_top; /* 0x000228 */
- uint64_t ce_adm_pcie_trig_compare_top; /* 0x000230 */
- uint64_t ce_adm_pcie_trig_compare_en_top; /* 0x000238 */
- uint64_t ce_adm_ssp_debug_sel_top; /* 0x000240 */
- uint64_t ce_adm_ssp_debug_lat_sel_lo_top; /* 0x000248 */
- uint64_t ce_adm_ssp_debug_lat_sel_hi_top; /* 0x000250 */
- uint64_t ce_adm_ssp_debug_trig_sel_top; /* 0x000258 */
- uint64_t ce_adm_ssp_debug_trig_lat_sel_lo_top; /* 0x000260 */
- uint64_t ce_adm_ssp_debug_trig_lat_sel_hi_top; /* 0x000268 */
- uint64_t ce_adm_ssp_trig_compare_top; /* 0x000270 */
- uint64_t ce_adm_ssp_trig_compare_en_top; /* 0x000278 */
- uint64_t ce_pad_000280[48]; /* 0x000280 -- 0x0003F8 */
-
- uint64_t ce_adm_bap_ctrl; /* 0x000400 */
- uint64_t ce_pad_000408[127]; /* 0x000408 -- 0x0007F8 */
-
- uint64_t ce_msg_buf_data63_0[35]; /* 0x000800 -- 0x000918 */
- uint64_t ce_pad_000920[29]; /* 0x000920 -- 0x0009F8 */
-
- uint64_t ce_msg_buf_data127_64[35]; /* 0x000A00 -- 0x000B18 */
- uint64_t ce_pad_000B20[29]; /* 0x000B20 -- 0x000BF8 */
-
- uint64_t ce_msg_buf_parity[35]; /* 0x000C00 -- 0x000D18 */
- uint64_t ce_pad_000D20[29]; /* 0x000D20 -- 0x000DF8 */
-
- uint64_t ce_pad_000E00[576]; /* 0x000E00 -- 0x001FF8 */
+ u64 ce_adm_id; /* 0x000000 */
+ u64 ce_pad_000008; /* 0x000008 */
+ u64 ce_adm_dyn_credit_status; /* 0x000010 */
+ u64 ce_adm_last_credit_status; /* 0x000018 */
+ u64 ce_adm_credit_limit; /* 0x000020 */
+ u64 ce_adm_force_credit; /* 0x000028 */
+ u64 ce_adm_control; /* 0x000030 */
+ u64 ce_adm_mmr_chn_timeout; /* 0x000038 */
+ u64 ce_adm_ssp_ure_timeout; /* 0x000040 */
+ u64 ce_adm_ssp_dre_timeout; /* 0x000048 */
+ u64 ce_adm_ssp_debug_sel; /* 0x000050 */
+ u64 ce_adm_int_status; /* 0x000058 */
+ u64 ce_adm_int_status_alias; /* 0x000060 */
+ u64 ce_adm_int_mask; /* 0x000068 */
+ u64 ce_adm_int_pending; /* 0x000070 */
+ u64 ce_adm_force_int; /* 0x000078 */
+ u64 ce_adm_ure_ups_buf_barrier_flush; /* 0x000080 */
+ u64 ce_adm_int_dest[15]; /* 0x000088 -- 0x0000F8 */
+ u64 ce_adm_error_summary; /* 0x000100 */
+ u64 ce_adm_error_summary_alias; /* 0x000108 */
+ u64 ce_adm_error_mask; /* 0x000110 */
+ u64 ce_adm_first_error; /* 0x000118 */
+ u64 ce_adm_error_overflow; /* 0x000120 */
+ u64 ce_adm_error_overflow_alias; /* 0x000128 */
+ u64 ce_pad_000130[2]; /* 0x000130 -- 0x000138 */
+ u64 ce_adm_tnum_error; /* 0x000140 */
+ u64 ce_adm_mmr_err_detail; /* 0x000148 */
+ u64 ce_adm_msg_sram_perr_detail; /* 0x000150 */
+ u64 ce_adm_bap_sram_perr_detail; /* 0x000158 */
+ u64 ce_adm_ce_sram_perr_detail; /* 0x000160 */
+ u64 ce_adm_ce_credit_oflow_detail; /* 0x000168 */
+ u64 ce_adm_tx_link_idle_max_timer; /* 0x000170 */
+ u64 ce_adm_pcie_debug_sel; /* 0x000178 */
+ u64 ce_pad_000180[16]; /* 0x000180 -- 0x0001F8 */
+
+ u64 ce_adm_pcie_debug_sel_top; /* 0x000200 */
+ u64 ce_adm_pcie_debug_lat_sel_lo_top; /* 0x000208 */
+ u64 ce_adm_pcie_debug_lat_sel_hi_top; /* 0x000210 */
+ u64 ce_adm_pcie_debug_trig_sel_top; /* 0x000218 */
+ u64 ce_adm_pcie_debug_trig_lat_sel_lo_top; /* 0x000220 */
+ u64 ce_adm_pcie_debug_trig_lat_sel_hi_top; /* 0x000228 */
+ u64 ce_adm_pcie_trig_compare_top; /* 0x000230 */
+ u64 ce_adm_pcie_trig_compare_en_top; /* 0x000238 */
+ u64 ce_adm_ssp_debug_sel_top; /* 0x000240 */
+ u64 ce_adm_ssp_debug_lat_sel_lo_top; /* 0x000248 */
+ u64 ce_adm_ssp_debug_lat_sel_hi_top; /* 0x000250 */
+ u64 ce_adm_ssp_debug_trig_sel_top; /* 0x000258 */
+ u64 ce_adm_ssp_debug_trig_lat_sel_lo_top; /* 0x000260 */
+ u64 ce_adm_ssp_debug_trig_lat_sel_hi_top; /* 0x000268 */
+ u64 ce_adm_ssp_trig_compare_top; /* 0x000270 */
+ u64 ce_adm_ssp_trig_compare_en_top; /* 0x000278 */
+ u64 ce_pad_000280[48]; /* 0x000280 -- 0x0003F8 */
+
+ u64 ce_adm_bap_ctrl; /* 0x000400 */
+ u64 ce_pad_000408[127]; /* 0x000408 -- 0x0007F8 */
+
+ u64 ce_msg_buf_data63_0[35]; /* 0x000800 -- 0x000918 */
+ u64 ce_pad_000920[29]; /* 0x000920 -- 0x0009F8 */
+
+ u64 ce_msg_buf_data127_64[35]; /* 0x000A00 -- 0x000B18 */
+ u64 ce_pad_000B20[29]; /* 0x000B20 -- 0x000BF8 */
+
+ u64 ce_msg_buf_parity[35]; /* 0x000C00 -- 0x000D18 */
+ u64 ce_pad_000D20[29]; /* 0x000D20 -- 0x000DF8 */
+
+ u64 ce_pad_000E00[576]; /* 0x000E00 -- 0x001FF8 */
/*
* LSI : LSI's PCI Express Link Registers (Link#1 and Link#2)
@@ -109,141 +109,141 @@ typedef volatile struct tioce {
*/
#define ce_lsi(link_num) ce_lsi[link_num-1]
struct ce_lsi_reg {
- uint64_t ce_lsi_lpu_id; /* 0x00z000 */
- uint64_t ce_lsi_rst; /* 0x00z008 */
- uint64_t ce_lsi_dbg_stat; /* 0x00z010 */
- uint64_t ce_lsi_dbg_cfg; /* 0x00z018 */
- uint64_t ce_lsi_ltssm_ctrl; /* 0x00z020 */
- uint64_t ce_lsi_lk_stat; /* 0x00z028 */
- uint64_t ce_pad_00z030[2]; /* 0x00z030 -- 0x00z038 */
- uint64_t ce_lsi_int_and_stat; /* 0x00z040 */
- uint64_t ce_lsi_int_mask; /* 0x00z048 */
- uint64_t ce_pad_00z050[22]; /* 0x00z050 -- 0x00z0F8 */
- uint64_t ce_lsi_lk_perf_cnt_sel; /* 0x00z100 */
- uint64_t ce_pad_00z108; /* 0x00z108 */
- uint64_t ce_lsi_lk_perf_cnt_ctrl; /* 0x00z110 */
- uint64_t ce_pad_00z118; /* 0x00z118 */
- uint64_t ce_lsi_lk_perf_cnt1; /* 0x00z120 */
- uint64_t ce_lsi_lk_perf_cnt1_test; /* 0x00z128 */
- uint64_t ce_lsi_lk_perf_cnt2; /* 0x00z130 */
- uint64_t ce_lsi_lk_perf_cnt2_test; /* 0x00z138 */
- uint64_t ce_pad_00z140[24]; /* 0x00z140 -- 0x00z1F8 */
- uint64_t ce_lsi_lk_lyr_cfg; /* 0x00z200 */
- uint64_t ce_lsi_lk_lyr_status; /* 0x00z208 */
- uint64_t ce_lsi_lk_lyr_int_stat; /* 0x00z210 */
- uint64_t ce_lsi_lk_ly_int_stat_test; /* 0x00z218 */
- uint64_t ce_lsi_lk_ly_int_stat_mask; /* 0x00z220 */
- uint64_t ce_pad_00z228[3]; /* 0x00z228 -- 0x00z238 */
- uint64_t ce_lsi_fc_upd_ctl; /* 0x00z240 */
- uint64_t ce_pad_00z248[3]; /* 0x00z248 -- 0x00z258 */
- uint64_t ce_lsi_flw_ctl_upd_to_timer; /* 0x00z260 */
- uint64_t ce_lsi_flw_ctl_upd_timer0; /* 0x00z268 */
- uint64_t ce_lsi_flw_ctl_upd_timer1; /* 0x00z270 */
- uint64_t ce_pad_00z278[49]; /* 0x00z278 -- 0x00z3F8 */
- uint64_t ce_lsi_freq_nak_lat_thrsh; /* 0x00z400 */
- uint64_t ce_lsi_ack_nak_lat_tmr; /* 0x00z408 */
- uint64_t ce_lsi_rply_tmr_thr; /* 0x00z410 */
- uint64_t ce_lsi_rply_tmr; /* 0x00z418 */
- uint64_t ce_lsi_rply_num_stat; /* 0x00z420 */
- uint64_t ce_lsi_rty_buf_max_addr; /* 0x00z428 */
- uint64_t ce_lsi_rty_fifo_ptr; /* 0x00z430 */
- uint64_t ce_lsi_rty_fifo_rd_wr_ptr; /* 0x00z438 */
- uint64_t ce_lsi_rty_fifo_cred; /* 0x00z440 */
- uint64_t ce_lsi_seq_cnt; /* 0x00z448 */
- uint64_t ce_lsi_ack_sent_seq_num; /* 0x00z450 */
- uint64_t ce_lsi_seq_cnt_fifo_max_addr; /* 0x00z458 */
- uint64_t ce_lsi_seq_cnt_fifo_ptr; /* 0x00z460 */
- uint64_t ce_lsi_seq_cnt_rd_wr_ptr; /* 0x00z468 */
- uint64_t ce_lsi_tx_lk_ts_ctl; /* 0x00z470 */
- uint64_t ce_pad_00z478; /* 0x00z478 */
- uint64_t ce_lsi_mem_addr_ctl; /* 0x00z480 */
- uint64_t ce_lsi_mem_d_ld0; /* 0x00z488 */
- uint64_t ce_lsi_mem_d_ld1; /* 0x00z490 */
- uint64_t ce_lsi_mem_d_ld2; /* 0x00z498 */
- uint64_t ce_lsi_mem_d_ld3; /* 0x00z4A0 */
- uint64_t ce_lsi_mem_d_ld4; /* 0x00z4A8 */
- uint64_t ce_pad_00z4B0[2]; /* 0x00z4B0 -- 0x00z4B8 */
- uint64_t ce_lsi_rty_d_cnt; /* 0x00z4C0 */
- uint64_t ce_lsi_seq_buf_cnt; /* 0x00z4C8 */
- uint64_t ce_lsi_seq_buf_bt_d; /* 0x00z4D0 */
- uint64_t ce_pad_00z4D8; /* 0x00z4D8 */
- uint64_t ce_lsi_ack_lat_thr; /* 0x00z4E0 */
- uint64_t ce_pad_00z4E8[3]; /* 0x00z4E8 -- 0x00z4F8 */
- uint64_t ce_lsi_nxt_rcv_seq_1_cntr; /* 0x00z500 */
- uint64_t ce_lsi_unsp_dllp_rcvd; /* 0x00z508 */
- uint64_t ce_lsi_rcv_lk_ts_ctl; /* 0x00z510 */
- uint64_t ce_pad_00z518[29]; /* 0x00z518 -- 0x00z5F8 */
- uint64_t ce_lsi_phy_lyr_cfg; /* 0x00z600 */
- uint64_t ce_pad_00z608; /* 0x00z608 */
- uint64_t ce_lsi_phy_lyr_int_stat; /* 0x00z610 */
- uint64_t ce_lsi_phy_lyr_int_stat_test; /* 0x00z618 */
- uint64_t ce_lsi_phy_lyr_int_mask; /* 0x00z620 */
- uint64_t ce_pad_00z628[11]; /* 0x00z628 -- 0x00z678 */
- uint64_t ce_lsi_rcv_phy_cfg; /* 0x00z680 */
- uint64_t ce_lsi_rcv_phy_stat1; /* 0x00z688 */
- uint64_t ce_lsi_rcv_phy_stat2; /* 0x00z690 */
- uint64_t ce_lsi_rcv_phy_stat3; /* 0x00z698 */
- uint64_t ce_lsi_rcv_phy_int_stat; /* 0x00z6A0 */
- uint64_t ce_lsi_rcv_phy_int_stat_test; /* 0x00z6A8 */
- uint64_t ce_lsi_rcv_phy_int_mask; /* 0x00z6B0 */
- uint64_t ce_pad_00z6B8[9]; /* 0x00z6B8 -- 0x00z6F8 */
- uint64_t ce_lsi_tx_phy_cfg; /* 0x00z700 */
- uint64_t ce_lsi_tx_phy_stat; /* 0x00z708 */
- uint64_t ce_lsi_tx_phy_int_stat; /* 0x00z710 */
- uint64_t ce_lsi_tx_phy_int_stat_test; /* 0x00z718 */
- uint64_t ce_lsi_tx_phy_int_mask; /* 0x00z720 */
- uint64_t ce_lsi_tx_phy_stat2; /* 0x00z728 */
- uint64_t ce_pad_00z730[10]; /* 0x00z730 -- 0x00z77F */
- uint64_t ce_lsi_ltssm_cfg1; /* 0x00z780 */
- uint64_t ce_lsi_ltssm_cfg2; /* 0x00z788 */
- uint64_t ce_lsi_ltssm_cfg3; /* 0x00z790 */
- uint64_t ce_lsi_ltssm_cfg4; /* 0x00z798 */
- uint64_t ce_lsi_ltssm_cfg5; /* 0x00z7A0 */
- uint64_t ce_lsi_ltssm_stat1; /* 0x00z7A8 */
- uint64_t ce_lsi_ltssm_stat2; /* 0x00z7B0 */
- uint64_t ce_lsi_ltssm_int_stat; /* 0x00z7B8 */
- uint64_t ce_lsi_ltssm_int_stat_test; /* 0x00z7C0 */
- uint64_t ce_lsi_ltssm_int_mask; /* 0x00z7C8 */
- uint64_t ce_lsi_ltssm_stat_wr_en; /* 0x00z7D0 */
- uint64_t ce_pad_00z7D8[5]; /* 0x00z7D8 -- 0x00z7F8 */
- uint64_t ce_lsi_gb_cfg1; /* 0x00z800 */
- uint64_t ce_lsi_gb_cfg2; /* 0x00z808 */
- uint64_t ce_lsi_gb_cfg3; /* 0x00z810 */
- uint64_t ce_lsi_gb_cfg4; /* 0x00z818 */
- uint64_t ce_lsi_gb_stat; /* 0x00z820 */
- uint64_t ce_lsi_gb_int_stat; /* 0x00z828 */
- uint64_t ce_lsi_gb_int_stat_test; /* 0x00z830 */
- uint64_t ce_lsi_gb_int_mask; /* 0x00z838 */
- uint64_t ce_lsi_gb_pwr_dn1; /* 0x00z840 */
- uint64_t ce_lsi_gb_pwr_dn2; /* 0x00z848 */
- uint64_t ce_pad_00z850[246]; /* 0x00z850 -- 0x00zFF8 */
+ u64 ce_lsi_lpu_id; /* 0x00z000 */
+ u64 ce_lsi_rst; /* 0x00z008 */
+ u64 ce_lsi_dbg_stat; /* 0x00z010 */
+ u64 ce_lsi_dbg_cfg; /* 0x00z018 */
+ u64 ce_lsi_ltssm_ctrl; /* 0x00z020 */
+ u64 ce_lsi_lk_stat; /* 0x00z028 */
+ u64 ce_pad_00z030[2]; /* 0x00z030 -- 0x00z038 */
+ u64 ce_lsi_int_and_stat; /* 0x00z040 */
+ u64 ce_lsi_int_mask; /* 0x00z048 */
+ u64 ce_pad_00z050[22]; /* 0x00z050 -- 0x00z0F8 */
+ u64 ce_lsi_lk_perf_cnt_sel; /* 0x00z100 */
+ u64 ce_pad_00z108; /* 0x00z108 */
+ u64 ce_lsi_lk_perf_cnt_ctrl; /* 0x00z110 */
+ u64 ce_pad_00z118; /* 0x00z118 */
+ u64 ce_lsi_lk_perf_cnt1; /* 0x00z120 */
+ u64 ce_lsi_lk_perf_cnt1_test; /* 0x00z128 */
+ u64 ce_lsi_lk_perf_cnt2; /* 0x00z130 */
+ u64 ce_lsi_lk_perf_cnt2_test; /* 0x00z138 */
+ u64 ce_pad_00z140[24]; /* 0x00z140 -- 0x00z1F8 */
+ u64 ce_lsi_lk_lyr_cfg; /* 0x00z200 */
+ u64 ce_lsi_lk_lyr_status; /* 0x00z208 */
+ u64 ce_lsi_lk_lyr_int_stat; /* 0x00z210 */
+ u64 ce_lsi_lk_ly_int_stat_test; /* 0x00z218 */
+ u64 ce_lsi_lk_ly_int_stat_mask; /* 0x00z220 */
+ u64 ce_pad_00z228[3]; /* 0x00z228 -- 0x00z238 */
+ u64 ce_lsi_fc_upd_ctl; /* 0x00z240 */
+ u64 ce_pad_00z248[3]; /* 0x00z248 -- 0x00z258 */
+ u64 ce_lsi_flw_ctl_upd_to_timer; /* 0x00z260 */
+ u64 ce_lsi_flw_ctl_upd_timer0; /* 0x00z268 */
+ u64 ce_lsi_flw_ctl_upd_timer1; /* 0x00z270 */
+ u64 ce_pad_00z278[49]; /* 0x00z278 -- 0x00z3F8 */
+ u64 ce_lsi_freq_nak_lat_thrsh; /* 0x00z400 */
+ u64 ce_lsi_ack_nak_lat_tmr; /* 0x00z408 */
+ u64 ce_lsi_rply_tmr_thr; /* 0x00z410 */
+ u64 ce_lsi_rply_tmr; /* 0x00z418 */
+ u64 ce_lsi_rply_num_stat; /* 0x00z420 */
+ u64 ce_lsi_rty_buf_max_addr; /* 0x00z428 */
+ u64 ce_lsi_rty_fifo_ptr; /* 0x00z430 */
+ u64 ce_lsi_rty_fifo_rd_wr_ptr; /* 0x00z438 */
+ u64 ce_lsi_rty_fifo_cred; /* 0x00z440 */
+ u64 ce_lsi_seq_cnt; /* 0x00z448 */
+ u64 ce_lsi_ack_sent_seq_num; /* 0x00z450 */
+ u64 ce_lsi_seq_cnt_fifo_max_addr; /* 0x00z458 */
+ u64 ce_lsi_seq_cnt_fifo_ptr; /* 0x00z460 */
+ u64 ce_lsi_seq_cnt_rd_wr_ptr; /* 0x00z468 */
+ u64 ce_lsi_tx_lk_ts_ctl; /* 0x00z470 */
+ u64 ce_pad_00z478; /* 0x00z478 */
+ u64 ce_lsi_mem_addr_ctl; /* 0x00z480 */
+ u64 ce_lsi_mem_d_ld0; /* 0x00z488 */
+ u64 ce_lsi_mem_d_ld1; /* 0x00z490 */
+ u64 ce_lsi_mem_d_ld2; /* 0x00z498 */
+ u64 ce_lsi_mem_d_ld3; /* 0x00z4A0 */
+ u64 ce_lsi_mem_d_ld4; /* 0x00z4A8 */
+ u64 ce_pad_00z4B0[2]; /* 0x00z4B0 -- 0x00z4B8 */
+ u64 ce_lsi_rty_d_cnt; /* 0x00z4C0 */
+ u64 ce_lsi_seq_buf_cnt; /* 0x00z4C8 */
+ u64 ce_lsi_seq_buf_bt_d; /* 0x00z4D0 */
+ u64 ce_pad_00z4D8; /* 0x00z4D8 */
+ u64 ce_lsi_ack_lat_thr; /* 0x00z4E0 */
+ u64 ce_pad_00z4E8[3]; /* 0x00z4E8 -- 0x00z4F8 */
+ u64 ce_lsi_nxt_rcv_seq_1_cntr; /* 0x00z500 */
+ u64 ce_lsi_unsp_dllp_rcvd; /* 0x00z508 */
+ u64 ce_lsi_rcv_lk_ts_ctl; /* 0x00z510 */
+ u64 ce_pad_00z518[29]; /* 0x00z518 -- 0x00z5F8 */
+ u64 ce_lsi_phy_lyr_cfg; /* 0x00z600 */
+ u64 ce_pad_00z608; /* 0x00z608 */
+ u64 ce_lsi_phy_lyr_int_stat; /* 0x00z610 */
+ u64 ce_lsi_phy_lyr_int_stat_test; /* 0x00z618 */
+ u64 ce_lsi_phy_lyr_int_mask; /* 0x00z620 */
+ u64 ce_pad_00z628[11]; /* 0x00z628 -- 0x00z678 */
+ u64 ce_lsi_rcv_phy_cfg; /* 0x00z680 */
+ u64 ce_lsi_rcv_phy_stat1; /* 0x00z688 */
+ u64 ce_lsi_rcv_phy_stat2; /* 0x00z690 */
+ u64 ce_lsi_rcv_phy_stat3; /* 0x00z698 */
+ u64 ce_lsi_rcv_phy_int_stat; /* 0x00z6A0 */
+ u64 ce_lsi_rcv_phy_int_stat_test; /* 0x00z6A8 */
+ u64 ce_lsi_rcv_phy_int_mask; /* 0x00z6B0 */
+ u64 ce_pad_00z6B8[9]; /* 0x00z6B8 -- 0x00z6F8 */
+ u64 ce_lsi_tx_phy_cfg; /* 0x00z700 */
+ u64 ce_lsi_tx_phy_stat; /* 0x00z708 */
+ u64 ce_lsi_tx_phy_int_stat; /* 0x00z710 */
+ u64 ce_lsi_tx_phy_int_stat_test; /* 0x00z718 */
+ u64 ce_lsi_tx_phy_int_mask; /* 0x00z720 */
+ u64 ce_lsi_tx_phy_stat2; /* 0x00z728 */
+ u64 ce_pad_00z730[10]; /* 0x00z730 -- 0x00z77F */
+ u64 ce_lsi_ltssm_cfg1; /* 0x00z780 */
+ u64 ce_lsi_ltssm_cfg2; /* 0x00z788 */
+ u64 ce_lsi_ltssm_cfg3; /* 0x00z790 */
+ u64 ce_lsi_ltssm_cfg4; /* 0x00z798 */
+ u64 ce_lsi_ltssm_cfg5; /* 0x00z7A0 */
+ u64 ce_lsi_ltssm_stat1; /* 0x00z7A8 */
+ u64 ce_lsi_ltssm_stat2; /* 0x00z7B0 */
+ u64 ce_lsi_ltssm_int_stat; /* 0x00z7B8 */
+ u64 ce_lsi_ltssm_int_stat_test; /* 0x00z7C0 */
+ u64 ce_lsi_ltssm_int_mask; /* 0x00z7C8 */
+ u64 ce_lsi_ltssm_stat_wr_en; /* 0x00z7D0 */
+ u64 ce_pad_00z7D8[5]; /* 0x00z7D8 -- 0x00z7F8 */
+ u64 ce_lsi_gb_cfg1; /* 0x00z800 */
+ u64 ce_lsi_gb_cfg2; /* 0x00z808 */
+ u64 ce_lsi_gb_cfg3; /* 0x00z810 */
+ u64 ce_lsi_gb_cfg4; /* 0x00z818 */
+ u64 ce_lsi_gb_stat; /* 0x00z820 */
+ u64 ce_lsi_gb_int_stat; /* 0x00z828 */
+ u64 ce_lsi_gb_int_stat_test; /* 0x00z830 */
+ u64 ce_lsi_gb_int_mask; /* 0x00z838 */
+ u64 ce_lsi_gb_pwr_dn1; /* 0x00z840 */
+ u64 ce_lsi_gb_pwr_dn2; /* 0x00z848 */
+ u64 ce_pad_00z850[246]; /* 0x00z850 -- 0x00zFF8 */
} ce_lsi[2];
- uint64_t ce_pad_004000[10]; /* 0x004000 -- 0x004048 */
+ u64 ce_pad_004000[10]; /* 0x004000 -- 0x004048 */
/*
* CRM: Coretalk Receive Module Registers
*/
- uint64_t ce_crm_debug_mux; /* 0x004050 */
- uint64_t ce_pad_004058; /* 0x004058 */
- uint64_t ce_crm_ssp_err_cmd_wrd; /* 0x004060 */
- uint64_t ce_crm_ssp_err_addr; /* 0x004068 */
- uint64_t ce_crm_ssp_err_syn; /* 0x004070 */
+ u64 ce_crm_debug_mux; /* 0x004050 */
+ u64 ce_pad_004058; /* 0x004058 */
+ u64 ce_crm_ssp_err_cmd_wrd; /* 0x004060 */
+ u64 ce_crm_ssp_err_addr; /* 0x004068 */
+ u64 ce_crm_ssp_err_syn; /* 0x004070 */
- uint64_t ce_pad_004078[499]; /* 0x004078 -- 0x005008 */
+ u64 ce_pad_004078[499]; /* 0x004078 -- 0x005008 */
/*
* CXM: Coretalk Xmit Module Registers
*/
- uint64_t ce_cxm_dyn_credit_status; /* 0x005010 */
- uint64_t ce_cxm_last_credit_status; /* 0x005018 */
- uint64_t ce_cxm_credit_limit; /* 0x005020 */
- uint64_t ce_cxm_force_credit; /* 0x005028 */
- uint64_t ce_cxm_disable_bypass; /* 0x005030 */
- uint64_t ce_pad_005038[3]; /* 0x005038 -- 0x005048 */
- uint64_t ce_cxm_debug_mux; /* 0x005050 */
+ u64 ce_cxm_dyn_credit_status; /* 0x005010 */
+ u64 ce_cxm_last_credit_status; /* 0x005018 */
+ u64 ce_cxm_credit_limit; /* 0x005020 */
+ u64 ce_cxm_force_credit; /* 0x005028 */
+ u64 ce_cxm_disable_bypass; /* 0x005030 */
+ u64 ce_pad_005038[3]; /* 0x005038 -- 0x005048 */
+ u64 ce_cxm_debug_mux; /* 0x005050 */
- uint64_t ce_pad_005058[501]; /* 0x005058 -- 0x005FF8 */
+ u64 ce_pad_005058[501]; /* 0x005058 -- 0x005FF8 */
/*
* DTL: Downstream Transaction Layer Regs (Link#1 and Link#2)
@@ -258,209 +258,209 @@ typedef volatile struct tioce {
#define ce_utl(link_num) ce_dtl_utl[link_num-1]
struct ce_dtl_utl_reg {
/* DTL */
- uint64_t ce_dtl_dtdr_credit_limit; /* 0x00y000 */
- uint64_t ce_dtl_dtdr_credit_force; /* 0x00y008 */
- uint64_t ce_dtl_dyn_credit_status; /* 0x00y010 */
- uint64_t ce_dtl_dtl_last_credit_stat; /* 0x00y018 */
- uint64_t ce_dtl_dtl_ctrl; /* 0x00y020 */
- uint64_t ce_pad_00y028[5]; /* 0x00y028 -- 0x00y048 */
- uint64_t ce_dtl_debug_sel; /* 0x00y050 */
- uint64_t ce_pad_00y058[501]; /* 0x00y058 -- 0x00yFF8 */
+ u64 ce_dtl_dtdr_credit_limit; /* 0x00y000 */
+ u64 ce_dtl_dtdr_credit_force; /* 0x00y008 */
+ u64 ce_dtl_dyn_credit_status; /* 0x00y010 */
+ u64 ce_dtl_dtl_last_credit_stat; /* 0x00y018 */
+ u64 ce_dtl_dtl_ctrl; /* 0x00y020 */
+ u64 ce_pad_00y028[5]; /* 0x00y028 -- 0x00y048 */
+ u64 ce_dtl_debug_sel; /* 0x00y050 */
+ u64 ce_pad_00y058[501]; /* 0x00y058 -- 0x00yFF8 */
/* UTL */
- uint64_t ce_utl_utl_ctrl; /* 0x00z000 */
- uint64_t ce_utl_debug_sel; /* 0x00z008 */
- uint64_t ce_pad_00z010[510]; /* 0x00z010 -- 0x00zFF8 */
+ u64 ce_utl_utl_ctrl; /* 0x00z000 */
+ u64 ce_utl_debug_sel; /* 0x00z008 */
+ u64 ce_pad_00z010[510]; /* 0x00z010 -- 0x00zFF8 */
} ce_dtl_utl[2];
- uint64_t ce_pad_00A000[514]; /* 0x00A000 -- 0x00B008 */
+ u64 ce_pad_00A000[514]; /* 0x00A000 -- 0x00B008 */
/*
* URE: Upstream Request Engine
*/
- uint64_t ce_ure_dyn_credit_status; /* 0x00B010 */
- uint64_t ce_ure_last_credit_status; /* 0x00B018 */
- uint64_t ce_ure_credit_limit; /* 0x00B020 */
- uint64_t ce_pad_00B028; /* 0x00B028 */
- uint64_t ce_ure_control; /* 0x00B030 */
- uint64_t ce_ure_status; /* 0x00B038 */
- uint64_t ce_pad_00B040[2]; /* 0x00B040 -- 0x00B048 */
- uint64_t ce_ure_debug_sel; /* 0x00B050 */
- uint64_t ce_ure_pcie_debug_sel; /* 0x00B058 */
- uint64_t ce_ure_ssp_err_cmd_wrd; /* 0x00B060 */
- uint64_t ce_ure_ssp_err_addr; /* 0x00B068 */
- uint64_t ce_ure_page_map; /* 0x00B070 */
- uint64_t ce_ure_dir_map[TIOCE_NUM_PORTS]; /* 0x00B078 */
- uint64_t ce_ure_pipe_sel1; /* 0x00B088 */
- uint64_t ce_ure_pipe_mask1; /* 0x00B090 */
- uint64_t ce_ure_pipe_sel2; /* 0x00B098 */
- uint64_t ce_ure_pipe_mask2; /* 0x00B0A0 */
- uint64_t ce_ure_pcie1_credits_sent; /* 0x00B0A8 */
- uint64_t ce_ure_pcie1_credits_used; /* 0x00B0B0 */
- uint64_t ce_ure_pcie1_credit_limit; /* 0x00B0B8 */
- uint64_t ce_ure_pcie2_credits_sent; /* 0x00B0C0 */
- uint64_t ce_ure_pcie2_credits_used; /* 0x00B0C8 */
- uint64_t ce_ure_pcie2_credit_limit; /* 0x00B0D0 */
- uint64_t ce_ure_pcie_force_credit; /* 0x00B0D8 */
- uint64_t ce_ure_rd_tnum_val; /* 0x00B0E0 */
- uint64_t ce_ure_rd_tnum_rsp_rcvd; /* 0x00B0E8 */
- uint64_t ce_ure_rd_tnum_esent_timer; /* 0x00B0F0 */
- uint64_t ce_ure_rd_tnum_error; /* 0x00B0F8 */
- uint64_t ce_ure_rd_tnum_first_cl; /* 0x00B100 */
- uint64_t ce_ure_rd_tnum_link_buf; /* 0x00B108 */
- uint64_t ce_ure_wr_tnum_val; /* 0x00B110 */
- uint64_t ce_ure_sram_err_addr0; /* 0x00B118 */
- uint64_t ce_ure_sram_err_addr1; /* 0x00B120 */
- uint64_t ce_ure_sram_err_addr2; /* 0x00B128 */
- uint64_t ce_ure_sram_rd_addr0; /* 0x00B130 */
- uint64_t ce_ure_sram_rd_addr1; /* 0x00B138 */
- uint64_t ce_ure_sram_rd_addr2; /* 0x00B140 */
- uint64_t ce_ure_sram_wr_addr0; /* 0x00B148 */
- uint64_t ce_ure_sram_wr_addr1; /* 0x00B150 */
- uint64_t ce_ure_sram_wr_addr2; /* 0x00B158 */
- uint64_t ce_ure_buf_flush10; /* 0x00B160 */
- uint64_t ce_ure_buf_flush11; /* 0x00B168 */
- uint64_t ce_ure_buf_flush12; /* 0x00B170 */
- uint64_t ce_ure_buf_flush13; /* 0x00B178 */
- uint64_t ce_ure_buf_flush20; /* 0x00B180 */
- uint64_t ce_ure_buf_flush21; /* 0x00B188 */
- uint64_t ce_ure_buf_flush22; /* 0x00B190 */
- uint64_t ce_ure_buf_flush23; /* 0x00B198 */
- uint64_t ce_ure_pcie_control1; /* 0x00B1A0 */
- uint64_t ce_ure_pcie_control2; /* 0x00B1A8 */
-
- uint64_t ce_pad_00B1B0[458]; /* 0x00B1B0 -- 0x00BFF8 */
+ u64 ce_ure_dyn_credit_status; /* 0x00B010 */
+ u64 ce_ure_last_credit_status; /* 0x00B018 */
+ u64 ce_ure_credit_limit; /* 0x00B020 */
+ u64 ce_pad_00B028; /* 0x00B028 */
+ u64 ce_ure_control; /* 0x00B030 */
+ u64 ce_ure_status; /* 0x00B038 */
+ u64 ce_pad_00B040[2]; /* 0x00B040 -- 0x00B048 */
+ u64 ce_ure_debug_sel; /* 0x00B050 */
+ u64 ce_ure_pcie_debug_sel; /* 0x00B058 */
+ u64 ce_ure_ssp_err_cmd_wrd; /* 0x00B060 */
+ u64 ce_ure_ssp_err_addr; /* 0x00B068 */
+ u64 ce_ure_page_map; /* 0x00B070 */
+ u64 ce_ure_dir_map[TIOCE_NUM_PORTS]; /* 0x00B078 */
+ u64 ce_ure_pipe_sel1; /* 0x00B088 */
+ u64 ce_ure_pipe_mask1; /* 0x00B090 */
+ u64 ce_ure_pipe_sel2; /* 0x00B098 */
+ u64 ce_ure_pipe_mask2; /* 0x00B0A0 */
+ u64 ce_ure_pcie1_credits_sent; /* 0x00B0A8 */
+ u64 ce_ure_pcie1_credits_used; /* 0x00B0B0 */
+ u64 ce_ure_pcie1_credit_limit; /* 0x00B0B8 */
+ u64 ce_ure_pcie2_credits_sent; /* 0x00B0C0 */
+ u64 ce_ure_pcie2_credits_used; /* 0x00B0C8 */
+ u64 ce_ure_pcie2_credit_limit; /* 0x00B0D0 */
+ u64 ce_ure_pcie_force_credit; /* 0x00B0D8 */
+ u64 ce_ure_rd_tnum_val; /* 0x00B0E0 */
+ u64 ce_ure_rd_tnum_rsp_rcvd; /* 0x00B0E8 */
+ u64 ce_ure_rd_tnum_esent_timer; /* 0x00B0F0 */
+ u64 ce_ure_rd_tnum_error; /* 0x00B0F8 */
+ u64 ce_ure_rd_tnum_first_cl; /* 0x00B100 */
+ u64 ce_ure_rd_tnum_link_buf; /* 0x00B108 */
+ u64 ce_ure_wr_tnum_val; /* 0x00B110 */
+ u64 ce_ure_sram_err_addr0; /* 0x00B118 */
+ u64 ce_ure_sram_err_addr1; /* 0x00B120 */
+ u64 ce_ure_sram_err_addr2; /* 0x00B128 */
+ u64 ce_ure_sram_rd_addr0; /* 0x00B130 */
+ u64 ce_ure_sram_rd_addr1; /* 0x00B138 */
+ u64 ce_ure_sram_rd_addr2; /* 0x00B140 */
+ u64 ce_ure_sram_wr_addr0; /* 0x00B148 */
+ u64 ce_ure_sram_wr_addr1; /* 0x00B150 */
+ u64 ce_ure_sram_wr_addr2; /* 0x00B158 */
+ u64 ce_ure_buf_flush10; /* 0x00B160 */
+ u64 ce_ure_buf_flush11; /* 0x00B168 */
+ u64 ce_ure_buf_flush12; /* 0x00B170 */
+ u64 ce_ure_buf_flush13; /* 0x00B178 */
+ u64 ce_ure_buf_flush20; /* 0x00B180 */
+ u64 ce_ure_buf_flush21; /* 0x00B188 */
+ u64 ce_ure_buf_flush22; /* 0x00B190 */
+ u64 ce_ure_buf_flush23; /* 0x00B198 */
+ u64 ce_ure_pcie_control1; /* 0x00B1A0 */
+ u64 ce_ure_pcie_control2; /* 0x00B1A8 */
+
+ u64 ce_pad_00B1B0[458]; /* 0x00B1B0 -- 0x00BFF8 */
/* Upstream Data Buffer, Port1 */
struct ce_ure_maint_ups_dat1_data {
- uint64_t data63_0[512]; /* 0x00C000 -- 0x00CFF8 */
- uint64_t data127_64[512]; /* 0x00D000 -- 0x00DFF8 */
- uint64_t parity[512]; /* 0x00E000 -- 0x00EFF8 */
+ u64 data63_0[512]; /* 0x00C000 -- 0x00CFF8 */
+ u64 data127_64[512]; /* 0x00D000 -- 0x00DFF8 */
+ u64 parity[512]; /* 0x00E000 -- 0x00EFF8 */
} ce_ure_maint_ups_dat1;
/* Upstream Header Buffer, Port1 */
struct ce_ure_maint_ups_hdr1_data {
- uint64_t data63_0[512]; /* 0x00F000 -- 0x00FFF8 */
- uint64_t data127_64[512]; /* 0x010000 -- 0x010FF8 */
- uint64_t parity[512]; /* 0x011000 -- 0x011FF8 */
+ u64 data63_0[512]; /* 0x00F000 -- 0x00FFF8 */
+ u64 data127_64[512]; /* 0x010000 -- 0x010FF8 */
+ u64 parity[512]; /* 0x011000 -- 0x011FF8 */
} ce_ure_maint_ups_hdr1;
/* Upstream Data Buffer, Port2 */
struct ce_ure_maint_ups_dat2_data {
- uint64_t data63_0[512]; /* 0x012000 -- 0x012FF8 */
- uint64_t data127_64[512]; /* 0x013000 -- 0x013FF8 */
- uint64_t parity[512]; /* 0x014000 -- 0x014FF8 */
+ u64 data63_0[512]; /* 0x012000 -- 0x012FF8 */
+ u64 data127_64[512]; /* 0x013000 -- 0x013FF8 */
+ u64 parity[512]; /* 0x014000 -- 0x014FF8 */
} ce_ure_maint_ups_dat2;
/* Upstream Header Buffer, Port2 */
struct ce_ure_maint_ups_hdr2_data {
- uint64_t data63_0[512]; /* 0x015000 -- 0x015FF8 */
- uint64_t data127_64[512]; /* 0x016000 -- 0x016FF8 */
- uint64_t parity[512]; /* 0x017000 -- 0x017FF8 */
+ u64 data63_0[512]; /* 0x015000 -- 0x015FF8 */
+ u64 data127_64[512]; /* 0x016000 -- 0x016FF8 */
+ u64 parity[512]; /* 0x017000 -- 0x017FF8 */
} ce_ure_maint_ups_hdr2;
/* Downstream Data Buffer */
struct ce_ure_maint_dns_dat_data {
- uint64_t data63_0[512]; /* 0x018000 -- 0x018FF8 */
- uint64_t data127_64[512]; /* 0x019000 -- 0x019FF8 */
- uint64_t parity[512]; /* 0x01A000 -- 0x01AFF8 */
+ u64 data63_0[512]; /* 0x018000 -- 0x018FF8 */
+ u64 data127_64[512]; /* 0x019000 -- 0x019FF8 */
+ u64 parity[512]; /* 0x01A000 -- 0x01AFF8 */
} ce_ure_maint_dns_dat;
/* Downstream Header Buffer */
struct ce_ure_maint_dns_hdr_data {
- uint64_t data31_0[64]; /* 0x01B000 -- 0x01B1F8 */
- uint64_t data95_32[64]; /* 0x01B200 -- 0x01B3F8 */
- uint64_t parity[64]; /* 0x01B400 -- 0x01B5F8 */
+ u64 data31_0[64]; /* 0x01B000 -- 0x01B1F8 */
+ u64 data95_32[64]; /* 0x01B200 -- 0x01B3F8 */
+ u64 parity[64]; /* 0x01B400 -- 0x01B5F8 */
} ce_ure_maint_dns_hdr;
/* RCI Buffer Data */
struct ce_ure_maint_rci_data {
- uint64_t data41_0[64]; /* 0x01B600 -- 0x01B7F8 */
- uint64_t data69_42[64]; /* 0x01B800 -- 0x01B9F8 */
+ u64 data41_0[64]; /* 0x01B600 -- 0x01B7F8 */
+ u64 data69_42[64]; /* 0x01B800 -- 0x01B9F8 */
} ce_ure_maint_rci;
/* Response Queue */
- uint64_t ce_ure_maint_rspq[64]; /* 0x01BA00 -- 0x01BBF8 */
+ u64 ce_ure_maint_rspq[64]; /* 0x01BA00 -- 0x01BBF8 */
- uint64_t ce_pad_01C000[4224]; /* 0x01BC00 -- 0x023FF8 */
+ u64 ce_pad_01C000[4224]; /* 0x01BC00 -- 0x023FF8 */
/* Admin Build-a-Packet Buffer */
struct ce_adm_maint_bap_buf_data {
- uint64_t data63_0[258]; /* 0x024000 -- 0x024808 */
- uint64_t data127_64[258]; /* 0x024810 -- 0x025018 */
- uint64_t parity[258]; /* 0x025020 -- 0x025828 */
+ u64 data63_0[258]; /* 0x024000 -- 0x024808 */
+ u64 data127_64[258]; /* 0x024810 -- 0x025018 */
+ u64 parity[258]; /* 0x025020 -- 0x025828 */
} ce_adm_maint_bap_buf;
- uint64_t ce_pad_025830[5370]; /* 0x025830 -- 0x02FFF8 */
+ u64 ce_pad_025830[5370]; /* 0x025830 -- 0x02FFF8 */
/* URE: 40bit PMU ATE Buffer */ /* 0x030000 -- 0x037FF8 */
- uint64_t ce_ure_ate40[TIOCE_NUM_M40_ATES];
+ u64 ce_ure_ate40[TIOCE_NUM_M40_ATES];
/* URE: 32/40bit PMU ATE Buffer */ /* 0x038000 -- 0x03BFF8 */
- uint64_t ce_ure_ate3240[TIOCE_NUM_M3240_ATES];
+ u64 ce_ure_ate3240[TIOCE_NUM_M3240_ATES];
- uint64_t ce_pad_03C000[2050]; /* 0x03C000 -- 0x040008 */
+ u64 ce_pad_03C000[2050]; /* 0x03C000 -- 0x040008 */
/*
* DRE: Down Stream Request Engine
*/
- uint64_t ce_dre_dyn_credit_status1; /* 0x040010 */
- uint64_t ce_dre_dyn_credit_status2; /* 0x040018 */
- uint64_t ce_dre_last_credit_status1; /* 0x040020 */
- uint64_t ce_dre_last_credit_status2; /* 0x040028 */
- uint64_t ce_dre_credit_limit1; /* 0x040030 */
- uint64_t ce_dre_credit_limit2; /* 0x040038 */
- uint64_t ce_dre_force_credit1; /* 0x040040 */
- uint64_t ce_dre_force_credit2; /* 0x040048 */
- uint64_t ce_dre_debug_mux1; /* 0x040050 */
- uint64_t ce_dre_debug_mux2; /* 0x040058 */
- uint64_t ce_dre_ssp_err_cmd_wrd; /* 0x040060 */
- uint64_t ce_dre_ssp_err_addr; /* 0x040068 */
- uint64_t ce_dre_comp_err_cmd_wrd; /* 0x040070 */
- uint64_t ce_dre_comp_err_addr; /* 0x040078 */
- uint64_t ce_dre_req_status; /* 0x040080 */
- uint64_t ce_dre_config1; /* 0x040088 */
- uint64_t ce_dre_config2; /* 0x040090 */
- uint64_t ce_dre_config_req_status; /* 0x040098 */
- uint64_t ce_pad_0400A0[12]; /* 0x0400A0 -- 0x0400F8 */
- uint64_t ce_dre_dyn_fifo; /* 0x040100 */
- uint64_t ce_pad_040108[3]; /* 0x040108 -- 0x040118 */
- uint64_t ce_dre_last_fifo; /* 0x040120 */
-
- uint64_t ce_pad_040128[27]; /* 0x040128 -- 0x0401F8 */
+ u64 ce_dre_dyn_credit_status1; /* 0x040010 */
+ u64 ce_dre_dyn_credit_status2; /* 0x040018 */
+ u64 ce_dre_last_credit_status1; /* 0x040020 */
+ u64 ce_dre_last_credit_status2; /* 0x040028 */
+ u64 ce_dre_credit_limit1; /* 0x040030 */
+ u64 ce_dre_credit_limit2; /* 0x040038 */
+ u64 ce_dre_force_credit1; /* 0x040040 */
+ u64 ce_dre_force_credit2; /* 0x040048 */
+ u64 ce_dre_debug_mux1; /* 0x040050 */
+ u64 ce_dre_debug_mux2; /* 0x040058 */
+ u64 ce_dre_ssp_err_cmd_wrd; /* 0x040060 */
+ u64 ce_dre_ssp_err_addr; /* 0x040068 */
+ u64 ce_dre_comp_err_cmd_wrd; /* 0x040070 */
+ u64 ce_dre_comp_err_addr; /* 0x040078 */
+ u64 ce_dre_req_status; /* 0x040080 */
+ u64 ce_dre_config1; /* 0x040088 */
+ u64 ce_dre_config2; /* 0x040090 */
+ u64 ce_dre_config_req_status; /* 0x040098 */
+ u64 ce_pad_0400A0[12]; /* 0x0400A0 -- 0x0400F8 */
+ u64 ce_dre_dyn_fifo; /* 0x040100 */
+ u64 ce_pad_040108[3]; /* 0x040108 -- 0x040118 */
+ u64 ce_dre_last_fifo; /* 0x040120 */
+
+ u64 ce_pad_040128[27]; /* 0x040128 -- 0x0401F8 */
/* DRE Downstream Head Queue */
struct ce_dre_maint_ds_head_queue {
- uint64_t data63_0[32]; /* 0x040200 -- 0x0402F8 */
- uint64_t data127_64[32]; /* 0x040300 -- 0x0403F8 */
- uint64_t parity[32]; /* 0x040400 -- 0x0404F8 */
+ u64 data63_0[32]; /* 0x040200 -- 0x0402F8 */
+ u64 data127_64[32]; /* 0x040300 -- 0x0403F8 */
+ u64 parity[32]; /* 0x040400 -- 0x0404F8 */
} ce_dre_maint_ds_head_q;
- uint64_t ce_pad_040500[352]; /* 0x040500 -- 0x040FF8 */
+ u64 ce_pad_040500[352]; /* 0x040500 -- 0x040FF8 */
/* DRE Downstream Data Queue */
struct ce_dre_maint_ds_data_queue {
- uint64_t data63_0[256]; /* 0x041000 -- 0x0417F8 */
- uint64_t ce_pad_041800[256]; /* 0x041800 -- 0x041FF8 */
- uint64_t data127_64[256]; /* 0x042000 -- 0x0427F8 */
- uint64_t ce_pad_042800[256]; /* 0x042800 -- 0x042FF8 */
- uint64_t parity[256]; /* 0x043000 -- 0x0437F8 */
- uint64_t ce_pad_043800[256]; /* 0x043800 -- 0x043FF8 */
+ u64 data63_0[256]; /* 0x041000 -- 0x0417F8 */
+ u64 ce_pad_041800[256]; /* 0x041800 -- 0x041FF8 */
+ u64 data127_64[256]; /* 0x042000 -- 0x0427F8 */
+ u64 ce_pad_042800[256]; /* 0x042800 -- 0x042FF8 */
+ u64 parity[256]; /* 0x043000 -- 0x0437F8 */
+ u64 ce_pad_043800[256]; /* 0x043800 -- 0x043FF8 */
} ce_dre_maint_ds_data_q;
/* DRE URE Upstream Response Queue */
struct ce_dre_maint_ure_us_rsp_queue {
- uint64_t data63_0[8]; /* 0x044000 -- 0x044038 */
- uint64_t ce_pad_044040[24]; /* 0x044040 -- 0x0440F8 */
- uint64_t data127_64[8]; /* 0x044100 -- 0x044138 */
- uint64_t ce_pad_044140[24]; /* 0x044140 -- 0x0441F8 */
- uint64_t parity[8]; /* 0x044200 -- 0x044238 */
- uint64_t ce_pad_044240[24]; /* 0x044240 -- 0x0442F8 */
+ u64 data63_0[8]; /* 0x044000 -- 0x044038 */
+ u64 ce_pad_044040[24]; /* 0x044040 -- 0x0440F8 */
+ u64 data127_64[8]; /* 0x044100 -- 0x044138 */
+ u64 ce_pad_044140[24]; /* 0x044140 -- 0x0441F8 */
+ u64 parity[8]; /* 0x044200 -- 0x044238 */
+ u64 ce_pad_044240[24]; /* 0x044240 -- 0x0442F8 */
} ce_dre_maint_ure_us_rsp_q;
- uint64_t ce_dre_maint_us_wrt_rsp[32];/* 0x044300 -- 0x0443F8 */
+ u64 ce_dre_maint_us_wrt_rsp[32];/* 0x044300 -- 0x0443F8 */
- uint64_t ce_end_of_struct; /* 0x044400 */
+ u64 ce_end_of_struct; /* 0x044400 */
} tioce_t;
@@ -625,11 +625,11 @@ typedef volatile struct tioce {
#define CE_URE_BUS_MASK (0xFFULL << BUS_SRC_ID_SHFT)
#define CE_URE_DEV_MASK (0x1FULL << DEV_SRC_ID_SHFT)
#define CE_URE_FNC_MASK (0x07ULL << FNC_SRC_ID_SHFT)
-#define CE_URE_PIPE_BUS(b) (((uint64_t)(b) << BUS_SRC_ID_SHFT) & \
+#define CE_URE_PIPE_BUS(b) (((u64)(b) << BUS_SRC_ID_SHFT) & \
CE_URE_BUS_MASK)
-#define CE_URE_PIPE_DEV(d) (((uint64_t)(d) << DEV_SRC_ID_SHFT) & \
+#define CE_URE_PIPE_DEV(d) (((u64)(d) << DEV_SRC_ID_SHFT) & \
CE_URE_DEV_MASK)
-#define CE_URE_PIPE_FNC(f) (((uint64_t)(f) << FNC_SRC_ID_SHFT) & \
+#define CE_URE_PIPE_FNC(f) (((u64)(f) << FNC_SRC_ID_SHFT) & \
CE_URE_FNC_MASK)
#define CE_URE_SEL1_SHFT 0
@@ -660,9 +660,9 @@ typedef volatile struct tioce {
#define CE_URE_PN1_MASK (0xFFULL << CE_URE_PN1_SHFT)
#define CE_URE_PN2_SHFT 24
#define CE_URE_PN2_MASK (0xFFULL << CE_URE_PN2_SHFT)
-#define CE_URE_PN1_SET(n) (((uint64_t)(n) << CE_URE_PN1_SHFT) & \
+#define CE_URE_PN1_SET(n) (((u64)(n) << CE_URE_PN1_SHFT) & \
CE_URE_PN1_MASK)
-#define CE_URE_PN2_SET(n) (((uint64_t)(n) << CE_URE_PN2_SHFT) & \
+#define CE_URE_PN2_SET(n) (((u64)(n) << CE_URE_PN2_SHFT) & \
CE_URE_PN2_MASK)
/* ce_ure_pcie_control2 register bit masks & shifts */
@@ -681,9 +681,9 @@ typedef volatile struct tioce {
#define CE_URE_PSN1_MASK (0x1FFFULL << CE_URE_PSN1_SHFT)
#define CE_URE_PSN2_SHFT 32
#define CE_URE_PSN2_MASK (0x1FFFULL << CE_URE_PSN2_SHFT)
-#define CE_URE_PSN1_SET(n) (((uint64_t)(n) << CE_URE_PSN1_SHFT) & \
+#define CE_URE_PSN1_SET(n) (((u64)(n) << CE_URE_PSN1_SHFT) & \
CE_URE_PSN1_MASK)
-#define CE_URE_PSN2_SET(n) (((uint64_t)(n) << CE_URE_PSN2_SHFT) & \
+#define CE_URE_PSN2_SET(n) (((u64)(n) << CE_URE_PSN2_SHFT) & \
CE_URE_PSN2_MASK)
/*
diff --git a/include/asm-ia64/sn/tioce_provider.h b/include/asm-ia64/sn/tioce_provider.h
index cb414908671d..6d62b13f7ae7 100644
--- a/include/asm-ia64/sn/tioce_provider.h
+++ b/include/asm-ia64/sn/tioce_provider.h
@@ -21,9 +21,9 @@
struct tioce_common {
struct pcibus_bussoft ce_pcibus; /* common pciio header */
- uint32_t ce_rev;
- uint64_t ce_kernel_private;
- uint64_t ce_prom_private;
+ u32 ce_rev;
+ u64 ce_kernel_private;
+ u64 ce_prom_private;
};
struct tioce_kernel {
@@ -31,31 +31,31 @@ struct tioce_kernel {
spinlock_t ce_lock;
struct list_head ce_dmamap_list;
- uint64_t ce_ate40_shadow[TIOCE_NUM_M40_ATES];
- uint64_t ce_ate3240_shadow[TIOCE_NUM_M3240_ATES];
- uint32_t ce_ate3240_pagesize;
+ u64 ce_ate40_shadow[TIOCE_NUM_M40_ATES];
+ u64 ce_ate3240_shadow[TIOCE_NUM_M3240_ATES];
+ u32 ce_ate3240_pagesize;
- uint8_t ce_port1_secondary;
+ u8 ce_port1_secondary;
/* per-port resources */
struct {
int dirmap_refcnt;
- uint64_t dirmap_shadow;
+ u64 dirmap_shadow;
} ce_port[TIOCE_NUM_PORTS];
};
struct tioce_dmamap {
struct list_head ce_dmamap_list; /* headed by tioce_kernel */
- uint32_t refcnt;
+ u32 refcnt;
- uint64_t nbytes; /* # bytes mapped */
+ u64 nbytes; /* # bytes mapped */
- uint64_t ct_start; /* coretalk start address */
- uint64_t pci_start; /* bus start address */
+ u64 ct_start; /* coretalk start address */
+ u64 pci_start; /* bus start address */
- uint64_t *ate_hw; /* hw ptr of first ate in map */
- uint64_t *ate_shadow; /* shadow ptr of firat ate */
- uint16_t ate_count; /* # ate's in the map */
+ u64 *ate_hw; /* hw ptr of first ate in map */
+ u64 *ate_shadow; /* shadow ptr of firat ate */
+ u16 ate_count; /* # ate's in the map */
};
extern int tioce_init_provider(void);
diff --git a/include/asm-ia64/sn/tiocp.h b/include/asm-ia64/sn/tiocp.h
index 5f2489c9d2dd..f47c08ab483c 100644
--- a/include/asm-ia64/sn/tiocp.h
+++ b/include/asm-ia64/sn/tiocp.h
@@ -21,189 +21,189 @@ struct tiocp{
/* 0x000000-0x00FFFF -- Local Registers */
/* 0x000000-0x000057 -- (Legacy Widget Space) Configuration */
- uint64_t cp_id; /* 0x000000 */
- uint64_t cp_stat; /* 0x000008 */
- uint64_t cp_err_upper; /* 0x000010 */
- uint64_t cp_err_lower; /* 0x000018 */
+ u64 cp_id; /* 0x000000 */
+ u64 cp_stat; /* 0x000008 */
+ u64 cp_err_upper; /* 0x000010 */
+ u64 cp_err_lower; /* 0x000018 */
#define cp_err cp_err_lower
- uint64_t cp_control; /* 0x000020 */
- uint64_t cp_req_timeout; /* 0x000028 */
- uint64_t cp_intr_upper; /* 0x000030 */
- uint64_t cp_intr_lower; /* 0x000038 */
+ u64 cp_control; /* 0x000020 */
+ u64 cp_req_timeout; /* 0x000028 */
+ u64 cp_intr_upper; /* 0x000030 */
+ u64 cp_intr_lower; /* 0x000038 */
#define cp_intr cp_intr_lower
- uint64_t cp_err_cmdword; /* 0x000040 */
- uint64_t _pad_000048; /* 0x000048 */
- uint64_t cp_tflush; /* 0x000050 */
+ u64 cp_err_cmdword; /* 0x000040 */
+ u64 _pad_000048; /* 0x000048 */
+ u64 cp_tflush; /* 0x000050 */
/* 0x000058-0x00007F -- Bridge-specific Configuration */
- uint64_t cp_aux_err; /* 0x000058 */
- uint64_t cp_resp_upper; /* 0x000060 */
- uint64_t cp_resp_lower; /* 0x000068 */
+ u64 cp_aux_err; /* 0x000058 */
+ u64 cp_resp_upper; /* 0x000060 */
+ u64 cp_resp_lower; /* 0x000068 */
#define cp_resp cp_resp_lower
- uint64_t cp_tst_pin_ctrl; /* 0x000070 */
- uint64_t cp_addr_lkerr; /* 0x000078 */
+ u64 cp_tst_pin_ctrl; /* 0x000070 */
+ u64 cp_addr_lkerr; /* 0x000078 */
/* 0x000080-0x00008F -- PMU & MAP */
- uint64_t cp_dir_map; /* 0x000080 */
- uint64_t _pad_000088; /* 0x000088 */
+ u64 cp_dir_map; /* 0x000080 */
+ u64 _pad_000088; /* 0x000088 */
/* 0x000090-0x00009F -- SSRAM */
- uint64_t cp_map_fault; /* 0x000090 */
- uint64_t _pad_000098; /* 0x000098 */
+ u64 cp_map_fault; /* 0x000090 */
+ u64 _pad_000098; /* 0x000098 */
/* 0x0000A0-0x0000AF -- Arbitration */
- uint64_t cp_arb; /* 0x0000A0 */
- uint64_t _pad_0000A8; /* 0x0000A8 */
+ u64 cp_arb; /* 0x0000A0 */
+ u64 _pad_0000A8; /* 0x0000A8 */
/* 0x0000B0-0x0000BF -- Number In A Can or ATE Parity Error */
- uint64_t cp_ate_parity_err; /* 0x0000B0 */
- uint64_t _pad_0000B8; /* 0x0000B8 */
+ u64 cp_ate_parity_err; /* 0x0000B0 */
+ u64 _pad_0000B8; /* 0x0000B8 */
/* 0x0000C0-0x0000FF -- PCI/GIO */
- uint64_t cp_bus_timeout; /* 0x0000C0 */
- uint64_t cp_pci_cfg; /* 0x0000C8 */
- uint64_t cp_pci_err_upper; /* 0x0000D0 */
- uint64_t cp_pci_err_lower; /* 0x0000D8 */
+ u64 cp_bus_timeout; /* 0x0000C0 */
+ u64 cp_pci_cfg; /* 0x0000C8 */
+ u64 cp_pci_err_upper; /* 0x0000D0 */
+ u64 cp_pci_err_lower; /* 0x0000D8 */
#define cp_pci_err cp_pci_err_lower
- uint64_t _pad_0000E0[4]; /* 0x0000{E0..F8} */
+ u64 _pad_0000E0[4]; /* 0x0000{E0..F8} */
/* 0x000100-0x0001FF -- Interrupt */
- uint64_t cp_int_status; /* 0x000100 */
- uint64_t cp_int_enable; /* 0x000108 */
- uint64_t cp_int_rst_stat; /* 0x000110 */
- uint64_t cp_int_mode; /* 0x000118 */
- uint64_t cp_int_device; /* 0x000120 */
- uint64_t cp_int_host_err; /* 0x000128 */
- uint64_t cp_int_addr[8]; /* 0x0001{30,,,68} */
- uint64_t cp_err_int_view; /* 0x000170 */
- uint64_t cp_mult_int; /* 0x000178 */
- uint64_t cp_force_always[8]; /* 0x0001{80,,,B8} */
- uint64_t cp_force_pin[8]; /* 0x0001{C0,,,F8} */
+ u64 cp_int_status; /* 0x000100 */
+ u64 cp_int_enable; /* 0x000108 */
+ u64 cp_int_rst_stat; /* 0x000110 */
+ u64 cp_int_mode; /* 0x000118 */
+ u64 cp_int_device; /* 0x000120 */
+ u64 cp_int_host_err; /* 0x000128 */
+ u64 cp_int_addr[8]; /* 0x0001{30,,,68} */
+ u64 cp_err_int_view; /* 0x000170 */
+ u64 cp_mult_int; /* 0x000178 */
+ u64 cp_force_always[8]; /* 0x0001{80,,,B8} */
+ u64 cp_force_pin[8]; /* 0x0001{C0,,,F8} */
/* 0x000200-0x000298 -- Device */
- uint64_t cp_device[4]; /* 0x0002{00,,,18} */
- uint64_t _pad_000220[4]; /* 0x0002{20,,,38} */
- uint64_t cp_wr_req_buf[4]; /* 0x0002{40,,,58} */
- uint64_t _pad_000260[4]; /* 0x0002{60,,,78} */
- uint64_t cp_rrb_map[2]; /* 0x0002{80,,,88} */
+ u64 cp_device[4]; /* 0x0002{00,,,18} */
+ u64 _pad_000220[4]; /* 0x0002{20,,,38} */
+ u64 cp_wr_req_buf[4]; /* 0x0002{40,,,58} */
+ u64 _pad_000260[4]; /* 0x0002{60,,,78} */
+ u64 cp_rrb_map[2]; /* 0x0002{80,,,88} */
#define cp_even_resp cp_rrb_map[0] /* 0x000280 */
#define cp_odd_resp cp_rrb_map[1] /* 0x000288 */
- uint64_t cp_resp_status; /* 0x000290 */
- uint64_t cp_resp_clear; /* 0x000298 */
+ u64 cp_resp_status; /* 0x000290 */
+ u64 cp_resp_clear; /* 0x000298 */
- uint64_t _pad_0002A0[12]; /* 0x0002{A0..F8} */
+ u64 _pad_0002A0[12]; /* 0x0002{A0..F8} */
/* 0x000300-0x0003F8 -- Buffer Address Match Registers */
struct {
- uint64_t upper; /* 0x0003{00,,,F0} */
- uint64_t lower; /* 0x0003{08,,,F8} */
+ u64 upper; /* 0x0003{00,,,F0} */
+ u64 lower; /* 0x0003{08,,,F8} */
} cp_buf_addr_match[16];
/* 0x000400-0x0005FF -- Performance Monitor Registers (even only) */
struct {
- uint64_t flush_w_touch; /* 0x000{400,,,5C0} */
- uint64_t flush_wo_touch; /* 0x000{408,,,5C8} */
- uint64_t inflight; /* 0x000{410,,,5D0} */
- uint64_t prefetch; /* 0x000{418,,,5D8} */
- uint64_t total_pci_retry; /* 0x000{420,,,5E0} */
- uint64_t max_pci_retry; /* 0x000{428,,,5E8} */
- uint64_t max_latency; /* 0x000{430,,,5F0} */
- uint64_t clear_all; /* 0x000{438,,,5F8} */
+ u64 flush_w_touch; /* 0x000{400,,,5C0} */
+ u64 flush_wo_touch; /* 0x000{408,,,5C8} */
+ u64 inflight; /* 0x000{410,,,5D0} */
+ u64 prefetch; /* 0x000{418,,,5D8} */
+ u64 total_pci_retry; /* 0x000{420,,,5E0} */
+ u64 max_pci_retry; /* 0x000{428,,,5E8} */
+ u64 max_latency; /* 0x000{430,,,5F0} */
+ u64 clear_all; /* 0x000{438,,,5F8} */
} cp_buf_count[8];
/* 0x000600-0x0009FF -- PCI/X registers */
- uint64_t cp_pcix_bus_err_addr; /* 0x000600 */
- uint64_t cp_pcix_bus_err_attr; /* 0x000608 */
- uint64_t cp_pcix_bus_err_data; /* 0x000610 */
- uint64_t cp_pcix_pio_split_addr; /* 0x000618 */
- uint64_t cp_pcix_pio_split_attr; /* 0x000620 */
- uint64_t cp_pcix_dma_req_err_attr; /* 0x000628 */
- uint64_t cp_pcix_dma_req_err_addr; /* 0x000630 */
- uint64_t cp_pcix_timeout; /* 0x000638 */
+ u64 cp_pcix_bus_err_addr; /* 0x000600 */
+ u64 cp_pcix_bus_err_attr; /* 0x000608 */
+ u64 cp_pcix_bus_err_data; /* 0x000610 */
+ u64 cp_pcix_pio_split_addr; /* 0x000618 */
+ u64 cp_pcix_pio_split_attr; /* 0x000620 */
+ u64 cp_pcix_dma_req_err_attr; /* 0x000628 */
+ u64 cp_pcix_dma_req_err_addr; /* 0x000630 */
+ u64 cp_pcix_timeout; /* 0x000638 */
- uint64_t _pad_000640[24]; /* 0x000{640,,,6F8} */
+ u64 _pad_000640[24]; /* 0x000{640,,,6F8} */
/* 0x000700-0x000737 -- Debug Registers */
- uint64_t cp_ct_debug_ctl; /* 0x000700 */
- uint64_t cp_br_debug_ctl; /* 0x000708 */
- uint64_t cp_mux3_debug_ctl; /* 0x000710 */
- uint64_t cp_mux4_debug_ctl; /* 0x000718 */
- uint64_t cp_mux5_debug_ctl; /* 0x000720 */
- uint64_t cp_mux6_debug_ctl; /* 0x000728 */
- uint64_t cp_mux7_debug_ctl; /* 0x000730 */
+ u64 cp_ct_debug_ctl; /* 0x000700 */
+ u64 cp_br_debug_ctl; /* 0x000708 */
+ u64 cp_mux3_debug_ctl; /* 0x000710 */
+ u64 cp_mux4_debug_ctl; /* 0x000718 */
+ u64 cp_mux5_debug_ctl; /* 0x000720 */
+ u64 cp_mux6_debug_ctl; /* 0x000728 */
+ u64 cp_mux7_debug_ctl; /* 0x000730 */
- uint64_t _pad_000738[89]; /* 0x000{738,,,9F8} */
+ u64 _pad_000738[89]; /* 0x000{738,,,9F8} */
/* 0x000A00-0x000BFF -- PCI/X Read&Write Buffer */
struct {
- uint64_t cp_buf_addr; /* 0x000{A00,,,AF0} */
- uint64_t cp_buf_attr; /* 0X000{A08,,,AF8} */
+ u64 cp_buf_addr; /* 0x000{A00,,,AF0} */
+ u64 cp_buf_attr; /* 0X000{A08,,,AF8} */
} cp_pcix_read_buf_64[16];
struct {
- uint64_t cp_buf_addr; /* 0x000{B00,,,BE0} */
- uint64_t cp_buf_attr; /* 0x000{B08,,,BE8} */
- uint64_t cp_buf_valid; /* 0x000{B10,,,BF0} */
- uint64_t __pad1; /* 0x000{B18,,,BF8} */
+ u64 cp_buf_addr; /* 0x000{B00,,,BE0} */
+ u64 cp_buf_attr; /* 0x000{B08,,,BE8} */
+ u64 cp_buf_valid; /* 0x000{B10,,,BF0} */
+ u64 __pad1; /* 0x000{B18,,,BF8} */
} cp_pcix_write_buf_64[8];
/* End of Local Registers -- Start of Address Map space */
- char _pad_000c00[0x010000 - 0x000c00];
+ char _pad_000c00[0x010000 - 0x000c00];
/* 0x010000-0x011FF8 -- Internal ATE RAM (Auto Parity Generation) */
- uint64_t cp_int_ate_ram[1024]; /* 0x010000-0x011FF8 */
+ u64 cp_int_ate_ram[1024]; /* 0x010000-0x011FF8 */
- char _pad_012000[0x14000 - 0x012000];
+ char _pad_012000[0x14000 - 0x012000];
/* 0x014000-0x015FF8 -- Internal ATE RAM (Manual Parity Generation) */
- uint64_t cp_int_ate_ram_mp[1024]; /* 0x014000-0x015FF8 */
+ u64 cp_int_ate_ram_mp[1024]; /* 0x014000-0x015FF8 */
- char _pad_016000[0x18000 - 0x016000];
+ char _pad_016000[0x18000 - 0x016000];
/* 0x18000-0x197F8 -- TIOCP Write Request Ram */
- uint64_t cp_wr_req_lower[256]; /* 0x18000 - 0x187F8 */
- uint64_t cp_wr_req_upper[256]; /* 0x18800 - 0x18FF8 */
- uint64_t cp_wr_req_parity[256]; /* 0x19000 - 0x197F8 */
+ u64 cp_wr_req_lower[256]; /* 0x18000 - 0x187F8 */
+ u64 cp_wr_req_upper[256]; /* 0x18800 - 0x18FF8 */
+ u64 cp_wr_req_parity[256]; /* 0x19000 - 0x197F8 */
- char _pad_019800[0x1C000 - 0x019800];
+ char _pad_019800[0x1C000 - 0x019800];
/* 0x1C000-0x1EFF8 -- TIOCP Read Response Ram */
- uint64_t cp_rd_resp_lower[512]; /* 0x1C000 - 0x1CFF8 */
- uint64_t cp_rd_resp_upper[512]; /* 0x1D000 - 0x1DFF8 */
- uint64_t cp_rd_resp_parity[512]; /* 0x1E000 - 0x1EFF8 */
+ u64 cp_rd_resp_lower[512]; /* 0x1C000 - 0x1CFF8 */
+ u64 cp_rd_resp_upper[512]; /* 0x1D000 - 0x1DFF8 */
+ u64 cp_rd_resp_parity[512]; /* 0x1E000 - 0x1EFF8 */
- char _pad_01F000[0x20000 - 0x01F000];
+ char _pad_01F000[0x20000 - 0x01F000];
/* 0x020000-0x021FFF -- Host Device (CP) Configuration Space (not used) */
- char _pad_020000[0x021000 - 0x20000];
+ char _pad_020000[0x021000 - 0x20000];
/* 0x021000-0x027FFF -- PCI Device Configuration Spaces */
union {
- uint8_t c[0x1000 / 1]; /* 0x02{0000,,,7FFF} */
- uint16_t s[0x1000 / 2]; /* 0x02{0000,,,7FFF} */
- uint32_t l[0x1000 / 4]; /* 0x02{0000,,,7FFF} */
- uint64_t d[0x1000 / 8]; /* 0x02{0000,,,7FFF} */
+ u8 c[0x1000 / 1]; /* 0x02{0000,,,7FFF} */
+ u16 s[0x1000 / 2]; /* 0x02{0000,,,7FFF} */
+ u32 l[0x1000 / 4]; /* 0x02{0000,,,7FFF} */
+ u64 d[0x1000 / 8]; /* 0x02{0000,,,7FFF} */
union {
- uint8_t c[0x100 / 1];
- uint16_t s[0x100 / 2];
- uint32_t l[0x100 / 4];
- uint64_t d[0x100 / 8];
+ u8 c[0x100 / 1];
+ u16 s[0x100 / 2];
+ u32 l[0x100 / 4];
+ u64 d[0x100 / 8];
} f[8];
} cp_type0_cfg_dev[7]; /* 0x02{1000,,,7FFF} */
/* 0x028000-0x028FFF -- PCI Type 1 Configuration Space */
union {
- uint8_t c[0x1000 / 1]; /* 0x028000-0x029000 */
- uint16_t s[0x1000 / 2]; /* 0x028000-0x029000 */
- uint32_t l[0x1000 / 4]; /* 0x028000-0x029000 */
- uint64_t d[0x1000 / 8]; /* 0x028000-0x029000 */
+ u8 c[0x1000 / 1]; /* 0x028000-0x029000 */
+ u16 s[0x1000 / 2]; /* 0x028000-0x029000 */
+ u32 l[0x1000 / 4]; /* 0x028000-0x029000 */
+ u64 d[0x1000 / 8]; /* 0x028000-0x029000 */
union {
- uint8_t c[0x100 / 1];
- uint16_t s[0x100 / 2];
- uint32_t l[0x100 / 4];
- uint64_t d[0x100 / 8];
+ u8 c[0x100 / 1];
+ u16 s[0x100 / 2];
+ u32 l[0x100 / 4];
+ u64 d[0x100 / 8];
} f[8];
} cp_type1_cfg; /* 0x028000-0x029000 */
@@ -211,30 +211,30 @@ struct tiocp{
/* 0x030000-0x030007 -- PCI Interrupt Acknowledge Cycle */
union {
- uint8_t c[8 / 1];
- uint16_t s[8 / 2];
- uint32_t l[8 / 4];
- uint64_t d[8 / 8];
+ u8 c[8 / 1];
+ u16 s[8 / 2];
+ u32 l[8 / 4];
+ u64 d[8 / 8];
} cp_pci_iack; /* 0x030000-0x030007 */
char _pad_030007[0x040000-0x030008];
/* 0x040000-0x040007 -- PCIX Special Cycle */
union {
- uint8_t c[8 / 1];
- uint16_t s[8 / 2];
- uint32_t l[8 / 4];
- uint64_t d[8 / 8];
+ u8 c[8 / 1];
+ u16 s[8 / 2];
+ u32 l[8 / 4];
+ u64 d[8 / 8];
} cp_pcix_cycle; /* 0x040000-0x040007 */
char _pad_040007[0x200000-0x040008];
/* 0x200000-0x7FFFFF -- PCI/GIO Device Spaces */
union {
- uint8_t c[0x100000 / 1];
- uint16_t s[0x100000 / 2];
- uint32_t l[0x100000 / 4];
- uint64_t d[0x100000 / 8];
+ u8 c[0x100000 / 1];
+ u16 s[0x100000 / 2];
+ u32 l[0x100000 / 4];
+ u64 d[0x100000 / 8];
} cp_devio_raw[6]; /* 0x200000-0x7FFFFF */
#define cp_devio(n) cp_devio_raw[((n)<2)?(n*2):(n+2)]
@@ -243,10 +243,10 @@ struct tiocp{
/* 0xA00000-0xBFFFFF -- PCI/GIO Device Spaces w/flush */
union {
- uint8_t c[0x100000 / 1];
- uint16_t s[0x100000 / 2];
- uint32_t l[0x100000 / 4];
- uint64_t d[0x100000 / 8];
+ u8 c[0x100000 / 1];
+ u16 s[0x100000 / 2];
+ u32 l[0x100000 / 4];
+ u64 d[0x100000 / 8];
} cp_devio_raw_flush[6]; /* 0xA00000-0xBFFFFF */
#define cp_devio_flush(n) cp_devio_raw_flush[((n)<2)?(n*2):(n+2)]
diff --git a/include/asm-ia64/sn/tiocx.h b/include/asm-ia64/sn/tiocx.h
index 5699e75e5024..d29728492f36 100644
--- a/include/asm-ia64/sn/tiocx.h
+++ b/include/asm-ia64/sn/tiocx.h
@@ -40,10 +40,10 @@ struct cx_drv {
};
/* create DMA address by stripping AS bits */
-#define TIOCX_DMA_ADDR(a) (uint64_t)((uint64_t)(a) & 0xffffcfffffffffUL)
+#define TIOCX_DMA_ADDR(a) (u64)((u64)(a) & 0xffffcfffffffffUL)
-#define TIOCX_TO_TIOCX_DMA_ADDR(a) (uint64_t)(((uint64_t)(a) & 0xfffffffff) | \
- ((((uint64_t)(a)) & 0xffffc000000000UL) <<2))
+#define TIOCX_TO_TIOCX_DMA_ADDR(a) (u64)(((u64)(a) & 0xfffffffff) | \
+ ((((u64)(a)) & 0xffffc000000000UL) <<2))
#define TIO_CE_ASIC_PARTNUM 0xce00
#define TIOCX_CORELET 3
@@ -63,10 +63,10 @@ extern int cx_device_unregister(struct cx_dev *);
extern int cx_device_register(nasid_t, int, int, struct hubdev_info *, int);
extern int cx_driver_unregister(struct cx_drv *);
extern int cx_driver_register(struct cx_drv *);
-extern uint64_t tiocx_dma_addr(uint64_t addr);
-extern uint64_t tiocx_swin_base(int nasid);
-extern void tiocx_mmr_store(int nasid, uint64_t offset, uint64_t value);
-extern uint64_t tiocx_mmr_load(int nasid, uint64_t offset);
+extern u64 tiocx_dma_addr(u64 addr);
+extern u64 tiocx_swin_base(int nasid);
+extern void tiocx_mmr_store(int nasid, u64 offset, u64 value);
+extern u64 tiocx_mmr_load(int nasid, u64 offset);
#endif // __KERNEL__
#endif // _ASM_IA64_SN_TIO_TIOCX__
diff --git a/include/asm-sh/bus-sh.h b/include/asm-sh/bus-sh.h
index 83c5d2fd057f..e42d63b65cb5 100644
--- a/include/asm-sh/bus-sh.h
+++ b/include/asm-sh/bus-sh.h
@@ -21,6 +21,7 @@ struct sh_dev {
void *mapbase;
unsigned int irq[6];
u64 *dma_mask;
+ u64 coherent_dma_mask;
};
#define to_sh_dev(d) container_of((d), struct sh_dev, dev)
diff --git a/include/asm-sh/clock.h b/include/asm-sh/clock.h
new file mode 100644
index 000000000000..fdfb75b30f0d
--- /dev/null
+++ b/include/asm-sh/clock.h
@@ -0,0 +1,61 @@
+#ifndef __ASM_SH_CLOCK_H
+#define __ASM_SH_CLOCK_H
+
+#include <linux/kref.h>
+#include <linux/list.h>
+#include <linux/seq_file.h>
+
+struct clk;
+
+struct clk_ops {
+ void (*init)(struct clk *clk);
+ void (*enable)(struct clk *clk);
+ void (*disable)(struct clk *clk);
+ void (*recalc)(struct clk *clk);
+ int (*set_rate)(struct clk *clk, unsigned long rate);
+};
+
+struct clk {
+ struct list_head node;
+ const char *name;
+
+ struct module *owner;
+
+ struct clk *parent;
+ struct clk_ops *ops;
+
+ struct kref kref;
+
+ unsigned long rate;
+ unsigned long flags;
+};
+
+#define CLK_ALWAYS_ENABLED (1 << 0)
+#define CLK_RATE_PROPAGATES (1 << 1)
+
+/* Should be defined by processor-specific code */
+void arch_init_clk_ops(struct clk_ops **, int type);
+
+/* arch/sh/kernel/cpu/clock.c */
+int clk_init(void);
+
+int __clk_enable(struct clk *);
+int clk_enable(struct clk *);
+
+void __clk_disable(struct clk *);
+void clk_disable(struct clk *);
+
+int clk_set_rate(struct clk *, unsigned long rate);
+unsigned long clk_get_rate(struct clk *);
+void clk_recalc_rate(struct clk *);
+
+struct clk *clk_get(const char *id);
+void clk_put(struct clk *);
+
+int clk_register(struct clk *);
+void clk_unregister(struct clk *);
+
+int show_clocks(struct seq_file *m);
+
+#endif /* __ASM_SH_CLOCK_H */
+
diff --git a/include/asm-sh/cpu-sh3/dma.h b/include/asm-sh/cpu-sh3/dma.h
index b972e715f9ee..954801b46022 100644
--- a/include/asm-sh/cpu-sh3/dma.h
+++ b/include/asm-sh/cpu-sh3/dma.h
@@ -3,5 +3,34 @@
#define SH_DMAC_BASE 0xa4000020
-#endif /* __ASM_CPU_SH3_DMA_H */
+/* Definitions for the SuperH DMAC */
+#define TM_BURST 0x00000020
+#define TS_8 0x00000000
+#define TS_16 0x00000008
+#define TS_32 0x00000010
+#define TS_128 0x00000018
+
+#define CHCR_TS_MASK 0x18
+#define CHCR_TS_SHIFT 3
+
+#define DMAOR_INIT DMAOR_DME
+/*
+ * The SuperH DMAC supports a number of transmit sizes, we list them here,
+ * with their respective values as they appear in the CHCR registers.
+ */
+enum {
+ XMIT_SZ_8BIT,
+ XMIT_SZ_16BIT,
+ XMIT_SZ_32BIT,
+ XMIT_SZ_128BIT,
+};
+
+static unsigned int ts_shift[] __attribute__ ((used)) = {
+ [XMIT_SZ_8BIT] = 0,
+ [XMIT_SZ_16BIT] = 1,
+ [XMIT_SZ_32BIT] = 2,
+ [XMIT_SZ_128BIT] = 4,
+};
+
+#endif /* __ASM_CPU_SH3_DMA_H */
diff --git a/include/asm-sh/cpu-sh4/dma.h b/include/asm-sh/cpu-sh4/dma.h
index e2b91adf821a..0dfe61f14802 100644
--- a/include/asm-sh/cpu-sh4/dma.h
+++ b/include/asm-sh/cpu-sh4/dma.h
@@ -1,17 +1,49 @@
#ifndef __ASM_CPU_SH4_DMA_H
#define __ASM_CPU_SH4_DMA_H
+#ifdef CONFIG_CPU_SH4A
+#define SH_DMAC_BASE 0xfc808020
+#else
#define SH_DMAC_BASE 0xffa00000
+#endif
-#define SAR ((unsigned long[]){SH_DMAC_BASE + 0x00, SH_DMAC_BASE + 0x10, \
- SH_DMAC_BASE + 0x20, SH_DMAC_BASE + 0x30})
-#define DAR ((unsigned long[]){SH_DMAC_BASE + 0x04, SH_DMAC_BASE + 0x14, \
- SH_DMAC_BASE + 0x24, SH_DMAC_BASE + 0x34})
-#define DMATCR ((unsigned long[]){SH_DMAC_BASE + 0x08, SH_DMAC_BASE + 0x18, \
- SH_DMAC_BASE + 0x28, SH_DMAC_BASE + 0x38})
-#define CHCR ((unsigned long[]){SH_DMAC_BASE + 0x0c, SH_DMAC_BASE + 0x1c, \
- SH_DMAC_BASE + 0x2c, SH_DMAC_BASE + 0x3c})
-#define DMAOR (SH_DMAC_BASE + 0x40)
+/* Definitions for the SuperH DMAC */
+#define TM_BURST 0x0000080
+#define TS_8 0x00000010
+#define TS_16 0x00000020
+#define TS_32 0x00000030
+#define TS_64 0x00000000
-#endif /* __ASM_CPU_SH4_DMA_H */
+#define CHCR_TS_MASK 0x30
+#define CHCR_TS_SHIFT 4
+
+#define DMAOR_COD 0x00000008
+
+#define DMAOR_INIT ( 0x8000 | DMAOR_DME )
+/*
+ * The SuperH DMAC supports a number of transmit sizes, we list them here,
+ * with their respective values as they appear in the CHCR registers.
+ *
+ * Defaults to a 64-bit transfer size.
+ */
+enum {
+ XMIT_SZ_64BIT,
+ XMIT_SZ_8BIT,
+ XMIT_SZ_16BIT,
+ XMIT_SZ_32BIT,
+ XMIT_SZ_256BIT,
+};
+
+/*
+ * The DMA count is defined as the number of bytes to transfer.
+ */
+static unsigned int ts_shift[] __attribute__ ((used)) = {
+ [XMIT_SZ_64BIT] = 3,
+ [XMIT_SZ_8BIT] = 0,
+ [XMIT_SZ_16BIT] = 1,
+ [XMIT_SZ_32BIT] = 2,
+ [XMIT_SZ_256BIT] = 5,
+};
+
+#endif /* __ASM_CPU_SH4_DMA_H */
diff --git a/include/asm-sh/cpu-sh4/freq.h b/include/asm-sh/cpu-sh4/freq.h
index 201d94fd214f..ef2b9b1ae41f 100644
--- a/include/asm-sh/cpu-sh4/freq.h
+++ b/include/asm-sh/cpu-sh4/freq.h
@@ -12,6 +12,8 @@
#if defined(CONFIG_CPU_SUBTYPE_SH73180)
#define FRQCR 0xa4150000
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+#define FRQCR 0xffc80000
#else
#define FRQCR 0xffc00000
#endif
diff --git a/include/asm-sh/dma-mapping.h b/include/asm-sh/dma-mapping.h
index d3fa5c2b889d..48f1f42c5d14 100644
--- a/include/asm-sh/dma-mapping.h
+++ b/include/asm-sh/dma-mapping.h
@@ -4,6 +4,7 @@
#include <linux/config.h>
#include <linux/mm.h>
#include <asm/scatterlist.h>
+#include <asm/cacheflush.h>
#include <asm/io.h>
extern struct bus_type pci_bus_type;
@@ -141,24 +142,24 @@ static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg,
}
}
-static inline void dma_sync_single_for_cpu(struct device *dev,
- dma_addr_t dma_handle, size_t size,
- enum dma_data_direction dir)
+static void dma_sync_single_for_cpu(struct device *dev,
+ dma_addr_t dma_handle, size_t size,
+ enum dma_data_direction dir)
__attribute__ ((alias("dma_sync_single")));
-static inline void dma_sync_single_for_device(struct device *dev,
- dma_addr_t dma_handle, size_t size,
- enum dma_data_direction dir)
+static void dma_sync_single_for_device(struct device *dev,
+ dma_addr_t dma_handle, size_t size,
+ enum dma_data_direction dir)
__attribute__ ((alias("dma_sync_single")));
-static inline void dma_sync_sg_for_cpu(struct device *dev,
- struct scatterlist *sg, int nelems,
- enum dma_data_direction dir)
+static void dma_sync_sg_for_cpu(struct device *dev,
+ struct scatterlist *sg, int nelems,
+ enum dma_data_direction dir)
__attribute__ ((alias("dma_sync_sg")));
-static inline void dma_sync_sg_for_device(struct device *dev,
- struct scatterlist *sg, int nelems,
- enum dma_data_direction dir)
+static void dma_sync_sg_for_device(struct device *dev,
+ struct scatterlist *sg, int nelems,
+ enum dma_data_direction dir)
__attribute__ ((alias("dma_sync_sg")));
static inline int dma_get_cache_alignment(void)
diff --git a/include/asm-sh/dma.h b/include/asm-sh/dma.h
index 8e9436093ca8..a118a0d43053 100644
--- a/include/asm-sh/dma.h
+++ b/include/asm-sh/dma.h
@@ -15,6 +15,7 @@
#include <linux/spinlock.h>
#include <linux/wait.h>
#include <linux/sysdev.h>
+#include <linux/device.h>
#include <asm/cpu/dma.h>
#include <asm/semaphore.h>
@@ -54,8 +55,8 @@ enum {
* DMA channel capabilities / flags
*/
enum {
- DMA_CONFIGURED = 0x00,
DMA_TEI_CAPABLE = 0x01,
+ DMA_CONFIGURED = 0x02,
};
extern spinlock_t dma_spin_lock;
@@ -74,7 +75,8 @@ struct dma_ops {
struct dma_channel {
char dev_id[16];
- unsigned int chan;
+ unsigned int chan; /* Physical channel number */
+ unsigned int vchan; /* Virtual channel number */
unsigned int mode;
unsigned int count;
@@ -91,6 +93,8 @@ struct dma_channel {
};
struct dma_info {
+ struct platform_device *pdev;
+
const char *name;
unsigned int nr_channels;
unsigned long flags;
@@ -130,7 +134,11 @@ extern void unregister_dmac(struct dma_info *info);
#ifdef CONFIG_SYSFS
/* arch/sh/drivers/dma/dma-sysfs.c */
-extern int dma_create_sysfs_files(struct dma_channel *);
+extern int dma_create_sysfs_files(struct dma_channel *, struct dma_info *);
+extern void dma_remove_sysfs_files(struct dma_channel *, struct dma_info *);
+#else
+#define dma_create_sysfs_file(channel, info) do { } while (0)
+#define dma_remove_sysfs_file(channel, info) do { } while (0)
#endif
#ifdef CONFIG_PCI
diff --git a/include/asm-sh/freq.h b/include/asm-sh/freq.h
index 2c0fde46a0ed..39c0e091cf58 100644
--- a/include/asm-sh/freq.h
+++ b/include/asm-sh/freq.h
@@ -14,16 +14,5 @@
#include <asm/cpu/freq.h>
-/* arch/sh/kernel/time.c */
-extern void get_current_frequency_divisors(unsigned int *ifc, unsigned int *pfc, unsigned int *bfc);
-
-extern unsigned int get_ifc_divisor(unsigned int value);
-extern unsigned int get_ifc_divisor(unsigned int value);
-extern unsigned int get_ifc_divisor(unsigned int value);
-
-extern unsigned int get_ifc_value(unsigned int divisor);
-extern unsigned int get_pfc_value(unsigned int divisor);
-extern unsigned int get_bfc_value(unsigned int divisor);
-
#endif /* __KERNEL__ */
#endif /* __ASM_SH_FREQ_H */
diff --git a/include/asm-sh/io.h b/include/asm-sh/io.h
index 6bc343fee7a0..b0b2937b6f83 100644
--- a/include/asm-sh/io.h
+++ b/include/asm-sh/io.h
@@ -11,7 +11,7 @@
* For read{b,w,l} and write{b,w,l} there are also __raw versions, which
* do not have a memory barrier after them.
*
- * In addition, we have
+ * In addition, we have
* ctrl_in{b,w,l}/ctrl_out{b,w,l} for SuperH specific I/O.
* which are processor specific.
*/
@@ -23,19 +23,27 @@
* inb by default expands to _inb, but the machine specific code may
* define it to __inb if it chooses.
*/
-
+#include <linux/config.h>
#include <asm/cache.h>
#include <asm/system.h>
#include <asm/addrspace.h>
#include <asm/machvec.h>
-#include <linux/config.h>
+#include <asm/pgtable.h>
+#include <asm-generic/iomap.h>
+
+#ifdef __KERNEL__
/*
* Depending on which platform we are running on, we need different
* I/O functions.
*/
+#define __IO_PREFIX generic
+#include <asm/io_generic.h>
+
+#define maybebadio(port) \
+ printk(KERN_ERR "bad PC-like io %s:%u for port 0x%lx at 0x%08x\n", \
+ __FUNCTION__, __LINE__, (port), (u32)__builtin_return_address(0))
-#ifdef __KERNEL__
/*
* Since boards are able to define their own set of I/O routines through
* their respective machine vector, we always wrap through the mv.
@@ -44,113 +52,120 @@
* a given routine, it will be wrapped to generic code at run-time.
*/
-# define __inb(p) sh_mv.mv_inb((p))
-# define __inw(p) sh_mv.mv_inw((p))
-# define __inl(p) sh_mv.mv_inl((p))
-# define __outb(x,p) sh_mv.mv_outb((x),(p))
-# define __outw(x,p) sh_mv.mv_outw((x),(p))
-# define __outl(x,p) sh_mv.mv_outl((x),(p))
-
-# define __inb_p(p) sh_mv.mv_inb_p((p))
-# define __inw_p(p) sh_mv.mv_inw_p((p))
-# define __inl_p(p) sh_mv.mv_inl_p((p))
-# define __outb_p(x,p) sh_mv.mv_outb_p((x),(p))
-# define __outw_p(x,p) sh_mv.mv_outw_p((x),(p))
-# define __outl_p(x,p) sh_mv.mv_outl_p((x),(p))
-
-# define __insb(p,b,c) sh_mv.mv_insb((p), (b), (c))
-# define __insw(p,b,c) sh_mv.mv_insw((p), (b), (c))
-# define __insl(p,b,c) sh_mv.mv_insl((p), (b), (c))
-# define __outsb(p,b,c) sh_mv.mv_outsb((p), (b), (c))
-# define __outsw(p,b,c) sh_mv.mv_outsw((p), (b), (c))
-# define __outsl(p,b,c) sh_mv.mv_outsl((p), (b), (c))
-
-# define __readb(a) sh_mv.mv_readb((a))
-# define __readw(a) sh_mv.mv_readw((a))
-# define __readl(a) sh_mv.mv_readl((a))
-# define __writeb(v,a) sh_mv.mv_writeb((v),(a))
-# define __writew(v,a) sh_mv.mv_writew((v),(a))
-# define __writel(v,a) sh_mv.mv_writel((v),(a))
-
-# define __ioremap(a,s) sh_mv.mv_ioremap((a), (s))
-# define __iounmap(a) sh_mv.mv_iounmap((a))
-
-# define __isa_port2addr(a) sh_mv.mv_isa_port2addr(a)
-
-# define inb __inb
-# define inw __inw
-# define inl __inl
-# define outb __outb
-# define outw __outw
-# define outl __outl
-
-# define inb_p __inb_p
-# define inw_p __inw_p
-# define inl_p __inl_p
-# define outb_p __outb_p
-# define outw_p __outw_p
-# define outl_p __outl_p
-
-# define insb __insb
-# define insw __insw
-# define insl __insl
-# define outsb __outsb
-# define outsw __outsw
-# define outsl __outsl
-
-# define __raw_readb __readb
-# define __raw_readw __readw
-# define __raw_readl __readl
-# define __raw_writeb __writeb
-# define __raw_writew __writew
-# define __raw_writel __writel
+#define __inb(p) sh_mv.mv_inb((p))
+#define __inw(p) sh_mv.mv_inw((p))
+#define __inl(p) sh_mv.mv_inl((p))
+#define __outb(x,p) sh_mv.mv_outb((x),(p))
+#define __outw(x,p) sh_mv.mv_outw((x),(p))
+#define __outl(x,p) sh_mv.mv_outl((x),(p))
+
+#define __inb_p(p) sh_mv.mv_inb_p((p))
+#define __inw_p(p) sh_mv.mv_inw_p((p))
+#define __inl_p(p) sh_mv.mv_inl_p((p))
+#define __outb_p(x,p) sh_mv.mv_outb_p((x),(p))
+#define __outw_p(x,p) sh_mv.mv_outw_p((x),(p))
+#define __outl_p(x,p) sh_mv.mv_outl_p((x),(p))
+
+#define __insb(p,b,c) sh_mv.mv_insb((p), (b), (c))
+#define __insw(p,b,c) sh_mv.mv_insw((p), (b), (c))
+#define __insl(p,b,c) sh_mv.mv_insl((p), (b), (c))
+#define __outsb(p,b,c) sh_mv.mv_outsb((p), (b), (c))
+#define __outsw(p,b,c) sh_mv.mv_outsw((p), (b), (c))
+#define __outsl(p,b,c) sh_mv.mv_outsl((p), (b), (c))
+
+#define __readb(a) sh_mv.mv_readb((a))
+#define __readw(a) sh_mv.mv_readw((a))
+#define __readl(a) sh_mv.mv_readl((a))
+#define __writeb(v,a) sh_mv.mv_writeb((v),(a))
+#define __writew(v,a) sh_mv.mv_writew((v),(a))
+#define __writel(v,a) sh_mv.mv_writel((v),(a))
+
+#define inb __inb
+#define inw __inw
+#define inl __inl
+#define outb __outb
+#define outw __outw
+#define outl __outl
+
+#define inb_p __inb_p
+#define inw_p __inw_p
+#define inl_p __inl_p
+#define outb_p __outb_p
+#define outw_p __outw_p
+#define outl_p __outl_p
+
+#define insb __insb
+#define insw __insw
+#define insl __insl
+#define outsb __outsb
+#define outsw __outsw
+#define outsl __outsl
+
+#define __raw_readb(a) __readb((void __iomem *)(a))
+#define __raw_readw(a) __readw((void __iomem *)(a))
+#define __raw_readl(a) __readl((void __iomem *)(a))
+#define __raw_writeb(v, a) __writeb(v, (void __iomem *)(a))
+#define __raw_writew(v, a) __writew(v, (void __iomem *)(a))
+#define __raw_writel(v, a) __writel(v, (void __iomem *)(a))
/*
* The platform header files may define some of these macros to use
* the inlined versions where appropriate. These macros may also be
* redefined by userlevel programs.
*/
-#ifdef __raw_readb
-# define readb(a) ({ unsigned long r_ = __raw_readb((unsigned long)a); mb(); r_; })
+#ifdef __readb
+# define readb(a) ({ unsigned long r_ = __raw_readb(a); mb(); r_; })
#endif
#ifdef __raw_readw
-# define readw(a) ({ unsigned long r_ = __raw_readw((unsigned long)a); mb(); r_; })
+# define readw(a) ({ unsigned long r_ = __raw_readw(a); mb(); r_; })
#endif
#ifdef __raw_readl
-# define readl(a) ({ unsigned long r_ = __raw_readl((unsigned long)a); mb(); r_; })
+# define readl(a) ({ unsigned long r_ = __raw_readl(a); mb(); r_; })
#endif
#ifdef __raw_writeb
-# define writeb(v,a) ({ __raw_writeb((v),(unsigned long)(a)); mb(); })
+# define writeb(v,a) ({ __raw_writeb((v),(a)); mb(); })
#endif
#ifdef __raw_writew
-# define writew(v,a) ({ __raw_writew((v),(unsigned long)(a)); mb(); })
+# define writew(v,a) ({ __raw_writew((v),(a)); mb(); })
#endif
#ifdef __raw_writel
-# define writel(v,a) ({ __raw_writel((v),(unsigned long)(a)); mb(); })
+# define writel(v,a) ({ __raw_writel((v),(a)); mb(); })
#endif
#define readb_relaxed(a) readb(a)
#define readw_relaxed(a) readw(a)
#define readl_relaxed(a) readl(a)
-#define mmiowb()
+/* Simple MMIO */
+#define ioread8(a) readb(a)
+#define ioread16(a) readw(a)
+#define ioread16be(a) be16_to_cpu(__raw_readw((a)))
+#define ioread32(a) readl(a)
+#define ioread32be(a) be32_to_cpu(__raw_readl((a)))
-/*
- * If the platform has PC-like I/O, this function converts the offset into
- * an address.
- */
-static __inline__ unsigned long isa_port2addr(unsigned long offset)
-{
- return __isa_port2addr(offset);
-}
+#define iowrite8(v,a) writeb((v),(a))
+#define iowrite16(v,a) writew((v),(a))
+#define iowrite16be(v,a) __raw_writew(cpu_to_be16((v)),(a))
+#define iowrite32(v,a) writel((v),(a))
+#define iowrite32be(v,a) __raw_writel(cpu_to_be32((v)),(a))
+
+#define ioread8_rep(a,d,c) insb((a),(d),(c))
+#define ioread16_rep(a,d,c) insw((a),(d),(c))
+#define ioread32_rep(a,d,c) insl((a),(d),(c))
+
+#define iowrite8_rep(a,s,c) outsb((a),(s),(c))
+#define iowrite16_rep(a,s,c) outsw((a),(s),(c))
+#define iowrite32_rep(a,s,c) outsl((a),(s),(c))
+
+#define mmiowb() wmb() /* synco on SH-4A, otherwise a nop */
/*
* This function provides a method for the generic case where a board-specific
- * isa_port2addr simply needs to return the port + some arbitrary port base.
+ * ioport_map simply needs to return the port + some arbitrary port base.
*
* We use this at board setup time to implicitly set the port base, and
- * as a result, we can use the generic isa_port2addr.
+ * as a result, we can use the generic ioport_map.
*/
static inline void __set_io_port_base(unsigned long pbase)
{
@@ -159,51 +174,52 @@ static inline void __set_io_port_base(unsigned long pbase)
generic_io_base = pbase;
}
-#define isa_readb(a) readb(isa_port2addr(a))
-#define isa_readw(a) readw(isa_port2addr(a))
-#define isa_readl(a) readl(isa_port2addr(a))
-#define isa_writeb(b,a) writeb(b,isa_port2addr(a))
-#define isa_writew(w,a) writew(w,isa_port2addr(a))
-#define isa_writel(l,a) writel(l,isa_port2addr(a))
+#define isa_readb(a) readb(ioport_map(a, 1))
+#define isa_readw(a) readw(ioport_map(a, 2))
+#define isa_readl(a) readl(ioport_map(a, 4))
+#define isa_writeb(b,a) writeb(b,ioport_map(a, 1))
+#define isa_writew(w,a) writew(w,ioport_map(a, 2))
+#define isa_writel(l,a) writel(l,ioport_map(a, 4))
+
#define isa_memset_io(a,b,c) \
- memset((void *)(isa_port2addr((unsigned long)a)),(b),(c))
+ memset((void *)(ioport_map((unsigned long)(a), 1)),(b),(c))
#define isa_memcpy_fromio(a,b,c) \
- memcpy((a),(void *)(isa_port2addr((unsigned long)(b))),(c))
+ memcpy((a),(void *)(ioport_map((unsigned long)(b), 1)),(c))
#define isa_memcpy_toio(a,b,c) \
- memcpy((void *)(isa_port2addr((unsigned long)(a))),(b),(c))
+ memcpy((void *)(ioport_map((unsigned long)(a), 1)),(b),(c))
/* We really want to try and get these to memcpy etc */
-extern void memcpy_fromio(void *, unsigned long, unsigned long);
-extern void memcpy_toio(unsigned long, const void *, unsigned long);
-extern void memset_io(unsigned long, int, unsigned long);
+extern void memcpy_fromio(void *, volatile void __iomem *, unsigned long);
+extern void memcpy_toio(volatile void __iomem *, const void *, unsigned long);
+extern void memset_io(volatile void __iomem *, int, unsigned long);
/* SuperH on-chip I/O functions */
-static __inline__ unsigned char ctrl_inb(unsigned long addr)
+static inline unsigned char ctrl_inb(unsigned long addr)
{
return *(volatile unsigned char*)addr;
}
-static __inline__ unsigned short ctrl_inw(unsigned long addr)
+static inline unsigned short ctrl_inw(unsigned long addr)
{
return *(volatile unsigned short*)addr;
}
-static __inline__ unsigned int ctrl_inl(unsigned long addr)
+static inline unsigned int ctrl_inl(unsigned long addr)
{
return *(volatile unsigned long*)addr;
}
-static __inline__ void ctrl_outb(unsigned char b, unsigned long addr)
+static inline void ctrl_outb(unsigned char b, unsigned long addr)
{
*(volatile unsigned char*)addr = b;
}
-static __inline__ void ctrl_outw(unsigned short b, unsigned long addr)
+static inline void ctrl_outw(unsigned short b, unsigned long addr)
{
*(volatile unsigned short*)addr = b;
}
-static __inline__ void ctrl_outl(unsigned int b, unsigned long addr)
+static inline void ctrl_outl(unsigned int b, unsigned long addr)
{
*(volatile unsigned long*)addr = b;
}
@@ -214,12 +230,12 @@ static __inline__ void ctrl_outl(unsigned int b, unsigned long addr)
* Change virtual addresses to physical addresses and vv.
* These are trivial on the 1:1 Linux/SuperH mapping
*/
-static __inline__ unsigned long virt_to_phys(volatile void * address)
+static inline unsigned long virt_to_phys(volatile void *address)
{
return PHYSADDR(address);
}
-static __inline__ void * phys_to_virt(unsigned long address)
+static inline void *phys_to_virt(unsigned long address)
{
return (void *)P1SEGADDR(address);
}
@@ -234,27 +250,60 @@ static __inline__ void * phys_to_virt(unsigned long address)
* differently. On the x86 architecture, we just read/write the
* memory location directly.
*
- * On SH, we have the whole physical address space mapped at all times
- * (as MIPS does), so "ioremap()" and "iounmap()" do not need to do
- * anything. (This isn't true for all machines but we still handle
- * these cases with wired TLB entries anyway ...)
+ * On SH, we traditionally have the whole physical address space mapped
+ * at all times (as MIPS does), so "ioremap()" and "iounmap()" do not
+ * need to do anything but place the address in the proper segment. This
+ * is true for P1 and P2 addresses, as well as some P3 ones. However,
+ * most of the P3 addresses and newer cores using extended addressing
+ * need to map through page tables, so the ioremap() implementation
+ * becomes a bit more complicated. See arch/sh/mm/ioremap.c for
+ * additional notes on this.
*
* We cheat a bit and always return uncachable areas until we've fixed
- * the drivers to handle caching properly.
+ * the drivers to handle caching properly.
*/
-static __inline__ void * ioremap(unsigned long offset, unsigned long size)
+#ifdef CONFIG_MMU
+void __iomem *__ioremap(unsigned long offset, unsigned long size,
+ unsigned long flags);
+void __iounmap(void __iomem *addr);
+#else
+#define __ioremap(offset, size, flags) ((void __iomem *)(offset))
+#define __iounmap(addr) do { } while (0)
+#endif /* CONFIG_MMU */
+
+static inline void __iomem *
+__ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
{
- return __ioremap(offset, size);
+ unsigned long last_addr = offset + size - 1;
+
+ /*
+ * For P1 and P2 space this is trivial, as everything is already
+ * mapped. Uncached access for P1 addresses are done through P2.
+ * In the P3 case or for addresses outside of the 29-bit space,
+ * mapping must be done by the PMB or by using page tables.
+ */
+ if (likely(PXSEG(offset) < P3SEG && PXSEG(last_addr) < P3SEG)) {
+ if (unlikely(flags & _PAGE_CACHABLE))
+ return (void __iomem *)P1SEGADDR(offset);
+
+ return (void __iomem *)P2SEGADDR(offset);
+ }
+
+ return __ioremap(offset, size, flags);
}
-static __inline__ void iounmap(void *addr)
-{
- return __iounmap(addr);
-}
-
-#define ioremap_nocache(off,size) ioremap(off,size)
-
-static __inline__ int check_signature(unsigned long io_addr,
+#define ioremap(offset, size) \
+ __ioremap_mode((offset), (size), 0)
+#define ioremap_nocache(offset, size) \
+ __ioremap_mode((offset), (size), 0)
+#define ioremap_cache(offset, size) \
+ __ioremap_mode((offset), (size), _PAGE_CACHABLE)
+#define p3_ioremap(offset, size, flags) \
+ __ioremap((offset), (size), (flags))
+#define iounmap(addr) \
+ __iounmap((addr))
+
+static inline int check_signature(char __iomem *io_addr,
const unsigned char *signature, int length)
{
int retval = 0;
diff --git a/include/asm-sh/io_generic.h b/include/asm-sh/io_generic.h
index be14587342f7..92fc6070d7b3 100644
--- a/include/asm-sh/io_generic.h
+++ b/include/asm-sh/io_generic.h
@@ -1,51 +1,49 @@
/*
- * include/asm-sh/io_generic.h
- *
- * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Generic IO functions
+ * Trivial I/O routine definitions, intentionally meant to be included
+ * multiple times. Ugly I/O routine concatenation helpers taken from
+ * alpha. Must be included _before_ io.h to avoid preprocessor-induced
+ * routine mismatch.
*/
-
-#ifndef _ASM_SH_IO_GENERIC_H
-#define _ASM_SH_IO_GENERIC_H
-
-extern unsigned long generic_io_base;
-
-extern unsigned char generic_inb(unsigned long port);
-extern unsigned short generic_inw(unsigned long port);
-extern unsigned int generic_inl(unsigned long port);
-
-extern void generic_outb(unsigned char value, unsigned long port);
-extern void generic_outw(unsigned short value, unsigned long port);
-extern void generic_outl(unsigned int value, unsigned long port);
-
-extern unsigned char generic_inb_p(unsigned long port);
-extern unsigned short generic_inw_p(unsigned long port);
-extern unsigned int generic_inl_p(unsigned long port);
-extern void generic_outb_p(unsigned char value, unsigned long port);
-extern void generic_outw_p(unsigned short value, unsigned long port);
-extern void generic_outl_p(unsigned int value, unsigned long port);
-
-extern void generic_insb(unsigned long port, void *addr, unsigned long count);
-extern void generic_insw(unsigned long port, void *addr, unsigned long count);
-extern void generic_insl(unsigned long port, void *addr, unsigned long count);
-extern void generic_outsb(unsigned long port, const void *addr, unsigned long count);
-extern void generic_outsw(unsigned long port, const void *addr, unsigned long count);
-extern void generic_outsl(unsigned long port, const void *addr, unsigned long count);
-
-extern unsigned char generic_readb(unsigned long addr);
-extern unsigned short generic_readw(unsigned long addr);
-extern unsigned int generic_readl(unsigned long addr);
-extern void generic_writeb(unsigned char b, unsigned long addr);
-extern void generic_writew(unsigned short b, unsigned long addr);
-extern void generic_writel(unsigned int b, unsigned long addr);
-
-extern void *generic_ioremap(unsigned long offset, unsigned long size);
-extern void generic_iounmap(void *addr);
-
-extern unsigned long generic_isa_port2addr(unsigned long offset);
-
-#endif /* _ASM_SH_IO_GENERIC_H */
+#define IO_CONCAT(a,b) _IO_CONCAT(a,b)
+#define _IO_CONCAT(a,b) a ## _ ## b
+
+#ifndef __IO_PREFIX
+#error "Don't include this header without a valid system prefix"
+#endif
+
+u8 IO_CONCAT(__IO_PREFIX,inb)(unsigned long);
+u16 IO_CONCAT(__IO_PREFIX,inw)(unsigned long);
+u32 IO_CONCAT(__IO_PREFIX,inl)(unsigned long);
+
+void IO_CONCAT(__IO_PREFIX,outb)(u8, unsigned long);
+void IO_CONCAT(__IO_PREFIX,outw)(u16, unsigned long);
+void IO_CONCAT(__IO_PREFIX,outl)(u32, unsigned long);
+
+u8 IO_CONCAT(__IO_PREFIX,inb_p)(unsigned long);
+u16 IO_CONCAT(__IO_PREFIX,inw_p)(unsigned long);
+u32 IO_CONCAT(__IO_PREFIX,inl_p)(unsigned long);
+void IO_CONCAT(__IO_PREFIX,outb_p)(u8, unsigned long);
+void IO_CONCAT(__IO_PREFIX,outw_p)(u16, unsigned long);
+void IO_CONCAT(__IO_PREFIX,outl_p)(u32, unsigned long);
+
+void IO_CONCAT(__IO_PREFIX,insb)(unsigned long, void *dst, unsigned long count);
+void IO_CONCAT(__IO_PREFIX,insw)(unsigned long, void *dst, unsigned long count);
+void IO_CONCAT(__IO_PREFIX,insl)(unsigned long, void *dst, unsigned long count);
+void IO_CONCAT(__IO_PREFIX,outsb)(unsigned long, const void *src, unsigned long count);
+void IO_CONCAT(__IO_PREFIX,outsw)(unsigned long, const void *src, unsigned long count);
+void IO_CONCAT(__IO_PREFIX,outsl)(unsigned long, const void *src, unsigned long count);
+
+u8 IO_CONCAT(__IO_PREFIX,readb)(void __iomem *);
+u16 IO_CONCAT(__IO_PREFIX,readw)(void __iomem *);
+u32 IO_CONCAT(__IO_PREFIX,readl)(void __iomem *);
+void IO_CONCAT(__IO_PREFIX,writeb)(u8, void __iomem *);
+void IO_CONCAT(__IO_PREFIX,writew)(u16, void __iomem *);
+void IO_CONCAT(__IO_PREFIX,writel)(u32, void __iomem *);
+
+void *IO_CONCAT(__IO_PREFIX,ioremap)(unsigned long offset, unsigned long size);
+void IO_CONCAT(__IO_PREFIX,iounmap)(void *addr);
+
+void __iomem *IO_CONCAT(__IO_PREFIX,ioport_map)(unsigned long addr, unsigned int size);
+void IO_CONCAT(__IO_PREFIX,ioport_unmap)(void __iomem *addr);
+
+#undef __IO_PREFIX
diff --git a/include/asm-sh/irq-sh7780.h b/include/asm-sh/irq-sh7780.h
new file mode 100644
index 000000000000..8c8ca1281084
--- /dev/null
+++ b/include/asm-sh/irq-sh7780.h
@@ -0,0 +1,349 @@
+#ifndef __ASM_SH_IRQ_SH7780_H
+#define __ASM_SH_IRQ_SH7780_H
+
+/*
+ * linux/include/asm-sh/irq-sh7780.h
+ *
+ * Copyright (C) 2004 Takashi SHUDO <shudo@hitachi-ul.co.jp>
+ */
+
+#ifdef CONFIG_IDE
+# ifndef IRQ_CFCARD
+# define IRQ_CFCARD 14
+# endif
+# ifndef IRQ_PCMCIA
+# define IRQ_PCMCIA 15
+# endif
+#endif
+
+#define INTC_BASE 0xffd00000
+#define INTC_ICR0 (INTC_BASE+0x0)
+#define INTC_ICR1 (INTC_BASE+0x1c)
+#define INTC_INTPRI (INTC_BASE+0x10)
+#define INTC_INTREQ (INTC_BASE+0x24)
+#define INTC_INTMSK0 (INTC_BASE+0x44)
+#define INTC_INTMSK1 (INTC_BASE+0x48)
+#define INTC_INTMSK2 (INTC_BASE+0x40080)
+#define INTC_INTMSKCLR0 (INTC_BASE+0x64)
+#define INTC_INTMSKCLR1 (INTC_BASE+0x68)
+#define INTC_INTMSKCLR2 (INTC_BASE+0x40084)
+#define INTC_NMIFCR (INTC_BASE+0xc0)
+#define INTC_USERIMASK (INTC_BASE+0x30000)
+
+#define INTC_INT2PRI0 (INTC_BASE+0x40000)
+#define INTC_INT2PRI1 (INTC_BASE+0x40004)
+#define INTC_INT2PRI2 (INTC_BASE+0x40008)
+#define INTC_INT2PRI3 (INTC_BASE+0x4000c)
+#define INTC_INT2PRI4 (INTC_BASE+0x40010)
+#define INTC_INT2PRI5 (INTC_BASE+0x40014)
+#define INTC_INT2PRI6 (INTC_BASE+0x40018)
+#define INTC_INT2PRI7 (INTC_BASE+0x4001c)
+#define INTC_INT2A0 (INTC_BASE+0x40030)
+#define INTC_INT2A1 (INTC_BASE+0x40034)
+#define INTC_INT2MSKR (INTC_BASE+0x40038)
+#define INTC_INT2MSKCR (INTC_BASE+0x4003c)
+#define INTC_INT2B0 (INTC_BASE+0x40040)
+#define INTC_INT2B1 (INTC_BASE+0x40044)
+#define INTC_INT2B2 (INTC_BASE+0x40048)
+#define INTC_INT2B3 (INTC_BASE+0x4004c)
+#define INTC_INT2B4 (INTC_BASE+0x40050)
+#define INTC_INT2B5 (INTC_BASE+0x40054)
+#define INTC_INT2B6 (INTC_BASE+0x40058)
+#define INTC_INT2B7 (INTC_BASE+0x4005c)
+#define INTC_INT2GPIC (INTC_BASE+0x40090)
+/*
+ NOTE:
+ *_IRQ = (INTEVT2 - 0x200)/0x20
+*/
+/* IRQ 0-7 line external int*/
+#define IRQ0_IRQ 2
+#define IRQ0_IPR_ADDR INTC_INTPRI
+#define IRQ0_IPR_POS 7
+#define IRQ0_PRIORITY 2
+
+#define IRQ1_IRQ 4
+#define IRQ1_IPR_ADDR INTC_INTPRI
+#define IRQ1_IPR_POS 6
+#define IRQ1_PRIORITY 2
+
+#define IRQ2_IRQ 6
+#define IRQ2_IPR_ADDR INTC_INTPRI
+#define IRQ2_IPR_POS 5
+#define IRQ2_PRIORITY 2
+
+#define IRQ3_IRQ 8
+#define IRQ3_IPR_ADDR INTC_INTPRI
+#define IRQ3_IPR_POS 4
+#define IRQ3_PRIORITY 2
+
+#define IRQ4_IRQ 10
+#define IRQ4_IPR_ADDR INTC_INTPRI
+#define IRQ4_IPR_POS 3
+#define IRQ4_PRIORITY 2
+
+#define IRQ5_IRQ 12
+#define IRQ5_IPR_ADDR INTC_INTPRI
+#define IRQ5_IPR_POS 2
+#define IRQ5_PRIORITY 2
+
+#define IRQ6_IRQ 14
+#define IRQ6_IPR_ADDR INTC_INTPRI
+#define IRQ6_IPR_POS 1
+#define IRQ6_PRIORITY 2
+
+#define IRQ7_IRQ 0
+#define IRQ7_IPR_ADDR INTC_INTPRI
+#define IRQ7_IPR_POS 0
+#define IRQ7_PRIORITY 2
+
+/* TMU */
+/* ch0 */
+#define TMU_IRQ 28
+#define TMU_IPR_ADDR INTC_INT2PRI0
+#define TMU_IPR_POS 3
+#define TMU_PRIORITY 2
+
+#define TIMER_IRQ 28
+#define TIMER_IPR_ADDR INTC_INT2PRI0
+#define TIMER_IPR_POS 3
+#define TIMER_PRIORITY 2
+
+/* ch 1*/
+#define TMU_CH1_IRQ 29
+#define TMU_CH1_IPR_ADDR INTC_INT2PRI0
+#define TMU_CH1_IPR_POS 2
+#define TMU_CH1_PRIORITY 2
+
+#define TIMER1_IRQ 29
+#define TIMER1_IPR_ADDR INTC_INT2PRI0
+#define TIMER1_IPR_POS 2
+#define TIMER1_PRIORITY 2
+
+/* ch 2*/
+#define TMU_CH2_IRQ 30
+#define TMU_CH2_IPR_ADDR INTC_INT2PRI0
+#define TMU_CH2_IPR_POS 1
+#define TMU_CH2_PRIORITY 2
+/* ch 2 Input capture */
+#define TMU_CH2IC_IRQ 31
+#define TMU_CH2IC_IPR_ADDR INTC_INT2PRI0
+#define TMU_CH2IC_IPR_POS 0
+#define TMU_CH2IC_PRIORITY 2
+/* ch 3 */
+#define TMU_CH3_IRQ 96
+#define TMU_CH3_IPR_ADDR INTC_INT2PRI1
+#define TMU_CH3_IPR_POS 3
+#define TMU_CH3_PRIORITY 2
+/* ch 4 */
+#define TMU_CH4_IRQ 97
+#define TMU_CH4_IPR_ADDR INTC_INT2PRI1
+#define TMU_CH4_IPR_POS 2
+#define TMU_CH4_PRIORITY 2
+/* ch 5*/
+#define TMU_CH5_IRQ 98
+#define TMU_CH5_IPR_ADDR INTC_INT2PRI1
+#define TMU_CH5_IPR_POS 1
+#define TMU_CH5_PRIORITY 2
+
+#define RTC_IRQ 22
+#define RTC_IPR_ADDR INTC_INT2PRI1
+#define RTC_IPR_POS 0
+#define RTC_PRIORITY TIMER_PRIORITY
+
+/* SCIF0 */
+#define SCIF0_ERI_IRQ 40
+#define SCIF0_RXI_IRQ 41
+#define SCIF0_BRI_IRQ 42
+#define SCIF0_TXI_IRQ 43
+#define SCIF0_IPR_ADDR INTC_INT2PRI2
+#define SCIF0_IPR_POS 3
+#define SCIF0_PRIORITY 3
+
+/* SCIF1 */
+#define SCIF1_ERI_IRQ 76
+#define SCIF1_RXI_IRQ 77
+#define SCIF1_BRI_IRQ 78
+#define SCIF1_TXI_IRQ 79
+#define SCIF1_IPR_ADDR INTC_INT2PRI2
+#define SCIF1_IPR_POS 2
+#define SCIF1_PRIORITY 3
+
+#define WDT_IRQ 27
+#define WDT_IPR_ADDR INTC_INT2PRI2
+#define WDT_IPR_POS 1
+#define WDT_PRIORITY 2
+
+/* DMAC(0) */
+#define DMINT0_IRQ 34
+#define DMINT1_IRQ 35
+#define DMINT2_IRQ 36
+#define DMINT3_IRQ 37
+#define DMINT4_IRQ 44
+#define DMINT5_IRQ 45
+#define DMINT6_IRQ 46
+#define DMINT7_IRQ 47
+#define DMAE_IRQ 38
+#define DMA0_IPR_ADDR INTC_INT2PRI3
+#define DMA0_IPR_POS 2
+#define DMA0_PRIORITY 7
+
+/* DMAC(1) */
+#define DMINT8_IRQ 92
+#define DMINT9_IRQ 93
+#define DMINT10_IRQ 94
+#define DMINT11_IRQ 95
+#define DMA1_IPR_ADDR INTC_INT2PRI3
+#define DMA1_IPR_POS 1
+#define DMA1_PRIORITY 7
+
+#define DMTE0_IRQ DMINT0_IRQ
+#define DMTE4_IRQ DMINT4_IRQ
+#define DMA_IPR_ADDR DMA0_IPR_ADDR
+#define DMA_IPR_POS DMA0_IPR_POS
+#define DMA_PRIORITY DMA0_PRIORITY
+
+/* CMT */
+#define CMT_IRQ 56
+#define CMT_IPR_ADDR INTC_INT2PRI4
+#define CMT_IPR_POS 3
+#define CMT_PRIORITY 0
+
+/* HAC */
+#define HAC_IRQ 60
+#define HAC_IPR_ADDR INTC_INT2PRI4
+#define HAC_IPR_POS 2
+#define CMT_PRIORITY 0
+
+/* PCIC(0) */
+#define PCIC0_IRQ 64
+#define PCIC0_IPR_ADDR INTC_INT2PRI4
+#define PCIC0_IPR_POS 1
+#define PCIC0_PRIORITY 2
+
+/* PCIC(1) */
+#define PCIC1_IRQ 65
+#define PCIC1_IPR_ADDR INTC_INT2PRI4
+#define PCIC1_IPR_POS 0
+#define PCIC1_PRIORITY 2
+
+/* PCIC(2) */
+#define PCIC2_IRQ 66
+#define PCIC2_IPR_ADDR INTC_INT2PRI5
+#define PCIC2_IPR_POS 3
+#define PCIC2_PRIORITY 2
+
+/* PCIC(3) */
+#define PCIC3_IRQ 67
+#define PCIC3_IPR_ADDR INTC_INT2PRI5
+#define PCIC3_IPR_POS 2
+#define PCIC3_PRIORITY 2
+
+/* PCIC(4) */
+#define PCIC4_IRQ 68
+#define PCIC4_IPR_ADDR INTC_INT2PRI5
+#define PCIC4_IPR_POS 1
+#define PCIC4_PRIORITY 2
+
+/* PCIC(5) */
+#define PCICERR_IRQ 69
+#define PCICPWD3_IRQ 70
+#define PCICPWD2_IRQ 71
+#define PCICPWD1_IRQ 72
+#define PCICPWD0_IRQ 73
+#define PCIC5_IPR_ADDR INTC_INT2PRI5
+#define PCIC5_IPR_POS 0
+#define PCIC5_PRIORITY 2
+
+/* SIOF */
+#define SIOF_IRQ 80
+#define SIOF_IPR_ADDR INTC_INT2PRI6
+#define SIOF_IPR_POS 3
+#define SIOF_PRIORITY 3
+
+/* HSPI */
+#define HSPI_IRQ 84
+#define HSPI_IPR_ADDR INTC_INT2PRI6
+#define HSPI_IPR_POS 2
+#define HSPI_PRIORITY 3
+
+/* MMCIF */
+#define MMCIF_FSTAT_IRQ 88
+#define MMCIF_TRAN_IRQ 89
+#define MMCIF_ERR_IRQ 90
+#define MMCIF_FRDY_IRQ 91
+#define MMCIF_IPR_ADDR INTC_INT2PRI6
+#define MMCIF_IPR_POS 1
+#define HSPI_PRIORITY 3
+
+/* SSI */
+#define SSI_IRQ 100
+#define SSI_IPR_ADDR INTC_INT2PRI6
+#define SSI_IPR_POS 0
+#define SSI_PRIORITY 3
+
+/* FLCTL */
+#define FLCTL_FLSTE_IRQ 104
+#define FLCTL_FLTEND_IRQ 105
+#define FLCTL_FLTRQ0_IRQ 106
+#define FLCTL_FLTRQ1_IRQ 107
+#define FLCTL_IPR_ADDR INTC_INT2PRI7
+#define FLCTL_IPR_POS 3
+#define FLCTL_PRIORITY 3
+
+/* GPIO */
+#define GPIO0_IRQ 108
+#define GPIO1_IRQ 109
+#define GPIO2_IRQ 110
+#define GPIO3_IRQ 111
+#define GPIO_IPR_ADDR INTC_INT2PRI7
+#define GPIO_IPR_POS 2
+#define GPIO_PRIORITY 3
+
+/* ONCHIP_NR_IRQS */
+#define NR_IRQS 150 /* 111 + 16 */
+
+/* In a generic kernel, NR_IRQS is an upper bound, and we should use
+ * ACTUAL_NR_IRQS (which uses the machine vector) to get the correct value.
+ */
+#define ACTUAL_NR_IRQS NR_IRQS
+
+extern void disable_irq(unsigned int);
+extern void disable_irq_nosync(unsigned int);
+extern void enable_irq(unsigned int);
+
+/*
+ * Simple Mask Register Support
+ */
+extern void make_maskreg_irq(unsigned int irq);
+extern unsigned short *irq_mask_register;
+
+/*
+ * Function for "on chip support modules".
+ */
+extern void make_imask_irq(unsigned int irq);
+
+#define INTC_TMU0_MSK 0
+#define INTC_TMU3_MSK 1
+#define INTC_RTC_MSK 2
+#define INTC_SCIF0_MSK 3
+#define INTC_SCIF1_MSK 4
+#define INTC_WDT_MSK 5
+#define INTC_HUID_MSK 7
+#define INTC_DMAC0_MSK 8
+#define INTC_DMAC1_MSK 9
+#define INTC_CMT_MSK 12
+#define INTC_HAC_MSK 13
+#define INTC_PCIC0_MSK 14
+#define INTC_PCIC1_MSK 15
+#define INTC_PCIC2_MSK 16
+#define INTC_PCIC3_MSK 17
+#define INTC_PCIC4_MSK 18
+#define INTC_PCIC5_MSK 19
+#define INTC_SIOF_MSK 20
+#define INTC_HSPI_MSK 21
+#define INTC_MMCIF_MSK 22
+#define INTC_SSI_MSK 23
+#define INTC_FLCTL_MSK 24
+#define INTC_GPIO_MSK 25
+
+#endif /* __ASM_SH_IRQ_SH7780_H */
diff --git a/include/asm-sh/irq.h b/include/asm-sh/irq.h
index 614a8c13b721..060ec3c27207 100644
--- a/include/asm-sh/irq.h
+++ b/include/asm-sh/irq.h
@@ -15,13 +15,20 @@
#include <asm/machvec.h>
#include <asm/ptrace.h> /* for pt_regs */
-#if defined(CONFIG_SH_HP600) || \
+#if defined(CONFIG_SH_HP6XX) || \
defined(CONFIG_SH_RTS7751R2D) || \
defined(CONFIG_SH_HS7751RVOIP) || \
- defined(CONFIG_SH_SH03)
+ defined(CONFIG_SH_HS7751RVOIP) || \
+ defined(CONFIG_SH_SH03) || \
+ defined(CONFIG_SH_R7780RP) || \
+ defined(CONFIG_SH_LANDISK)
#include <asm/mach/ide.h>
#endif
+#ifndef CONFIG_CPU_SUBTYPE_SH7780
+
+#define INTC_DMAC0_MSK 0
+
#if defined(CONFIG_CPU_SH3)
#define INTC_IPRA 0xfffffee2UL
#define INTC_IPRB 0xfffffee4UL
@@ -235,8 +242,9 @@
#define SCIF1_IPR_ADDR INTC_IPRB
#define SCIF1_IPR_POS 1
#define SCIF1_PRIORITY 3
-#endif
-#endif
+#endif /* ST40STB1 */
+
+#endif /* 775x / SH4-202 / ST40STB1 */
/* NR_IRQS is made from three components:
* 1. ONCHIP_NR_IRQS - number of IRLS + on-chip peripherial modules
@@ -245,37 +253,35 @@
*/
/* 1. ONCHIP_NR_IRQS */
-#ifdef CONFIG_SH_GENERIC
+#if defined(CONFIG_CPU_SUBTYPE_SH7604)
+# define ONCHIP_NR_IRQS 24 // Actually 21
+#elif defined(CONFIG_CPU_SUBTYPE_SH7707)
+# define ONCHIP_NR_IRQS 64
+# define PINT_NR_IRQS 16
+#elif defined(CONFIG_CPU_SUBTYPE_SH7708)
+# define ONCHIP_NR_IRQS 32
+#elif defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7705)
+# define ONCHIP_NR_IRQS 64 // Actually 61
+# define PINT_NR_IRQS 16
+#elif defined(CONFIG_CPU_SUBTYPE_SH7750)
+# define ONCHIP_NR_IRQS 48 // Actually 44
+#elif defined(CONFIG_CPU_SUBTYPE_SH7751)
+# define ONCHIP_NR_IRQS 72
+#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
+# define ONCHIP_NR_IRQS 112 /* XXX */
+#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
+# define ONCHIP_NR_IRQS 72
+#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
+# define ONCHIP_NR_IRQS 144
+#elif defined(CONFIG_CPU_SUBTYPE_SH7300)
+# define ONCHIP_NR_IRQS 109
+#elif defined(CONFIG_SH_UNKNOWN) /* Most be last */
# define ONCHIP_NR_IRQS 144
-#else
-# if defined(CONFIG_CPU_SUBTYPE_SH7604)
-# define ONCHIP_NR_IRQS 24 // Actually 21
-# elif defined(CONFIG_CPU_SUBTYPE_SH7707)
-# define ONCHIP_NR_IRQS 64
-# define PINT_NR_IRQS 16
-# elif defined(CONFIG_CPU_SUBTYPE_SH7708)
-# define ONCHIP_NR_IRQS 32
-# elif defined(CONFIG_CPU_SUBTYPE_SH7709) || \
- defined(CONFIG_CPU_SUBTYPE_SH7705)
-# define ONCHIP_NR_IRQS 64 // Actually 61
-# define PINT_NR_IRQS 16
-# elif defined(CONFIG_CPU_SUBTYPE_SH7750)
-# define ONCHIP_NR_IRQS 48 // Actually 44
-# elif defined(CONFIG_CPU_SUBTYPE_SH7751)
-# define ONCHIP_NR_IRQS 72
-# elif defined(CONFIG_CPU_SUBTYPE_SH7760)
-# define ONCHIP_NR_IRQS 110
-# elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
-# define ONCHIP_NR_IRQS 72
-# elif defined(CONFIG_CPU_SUBTYPE_ST40STB1)
-# define ONCHIP_NR_IRQS 144
-# elif defined(CONFIG_CPU_SUBTYPE_SH7300)
-# define ONCHIP_NR_IRQS 109
-# endif
#endif
/* 2. PINT_NR_IRQS */
-#ifdef CONFIG_SH_GENERIC
+#ifdef CONFIG_SH_UNKNOWN
# define PINT_NR_IRQS 16
#else
# ifndef PINT_NR_IRQS
@@ -288,22 +294,22 @@
#endif
/* 3. OFFCHIP_NR_IRQS */
-#ifdef CONFIG_SH_GENERIC
+#if defined(CONFIG_HD64461)
+# define OFFCHIP_NR_IRQS 18
+#elif defined (CONFIG_SH_BIGSUR) /* must be before CONFIG_HD64465 */
+# define OFFCHIP_NR_IRQS 48
+#elif defined(CONFIG_HD64465)
# define OFFCHIP_NR_IRQS 16
+#elif defined (CONFIG_SH_EC3104)
+# define OFFCHIP_NR_IRQS 16
+#elif defined (CONFIG_SH_DREAMCAST)
+# define OFFCHIP_NR_IRQS 96
+#elif defined (CONFIG_SH_TITAN)
+# define OFFCHIP_NR_IRQS 4
+#elif defined(CONFIG_SH_UNKNOWN)
+# define OFFCHIP_NR_IRQS 16 /* Must also be last */
#else
-# if defined(CONFIG_HD64461)
-# define OFFCHIP_NR_IRQS 18
-# elif defined (CONFIG_SH_BIGSUR) /* must be before CONFIG_HD64465 */
-# define OFFCHIP_NR_IRQS 48
-# elif defined(CONFIG_HD64465)
-# define OFFCHIP_NR_IRQS 16
-# elif defined (CONFIG_SH_EC3104)
-# define OFFCHIP_NR_IRQS 16
-# elif defined (CONFIG_SH_DREAMCAST)
-# define OFFCHIP_NR_IRQS 96
-# else
-# define OFFCHIP_NR_IRQS 0
-# endif
+# define OFFCHIP_NR_IRQS 0
#endif
#if OFFCHIP_NR_IRQS > 0
@@ -313,16 +319,6 @@
/* NR_IRQS. 1+2+3 */
#define NR_IRQS (ONCHIP_NR_IRQS + PINT_NR_IRQS + OFFCHIP_NR_IRQS)
-/* In a generic kernel, NR_IRQS is an upper bound, and we should use
- * ACTUAL_NR_IRQS (which uses the machine vector) to get the correct value.
- */
-#ifdef CONFIG_SH_GENERIC
-# define ACTUAL_NR_IRQS (sh_mv.mv_nr_irqs)
-#else
-# define ACTUAL_NR_IRQS NR_IRQS
-#endif
-
-
extern void disable_irq(unsigned int);
extern void disable_irq_nosync(unsigned int);
extern void enable_irq(unsigned int);
@@ -542,9 +538,6 @@ extern int ipr_irq_demux(int irq);
extern int ipr_irq_demux(int irq);
#define __irq_demux(irq) ipr_irq_demux(irq)
-
-#else
-#define __irq_demux(irq) irq
#endif /* CONFIG_CPU_SUBTYPE_SH7707 || CONFIG_CPU_SUBTYPE_SH7709 */
#if defined(CONFIG_CPU_SUBTYPE_SH7750) || defined(CONFIG_CPU_SUBTYPE_SH7751) || \
@@ -557,18 +550,35 @@ extern int ipr_irq_demux(int irq);
#define INTC_ICR_IRLM (1<<7)
#endif
-#ifdef CONFIG_CPU_SUBTYPE_ST40STB1
+#else
+#include <asm/irq-sh7780.h>
+#endif
+/* SH with INTC2-style interrupts */
+#ifdef CONFIG_CPU_HAS_INTC2_IRQ
+#if defined(CONFIG_CPU_SUBTYPE_ST40STB1)
+#define INTC2_BASE 0xfe080000
#define INTC2_FIRST_IRQ 64
-#define NR_INTC2_IRQS 25
-
+#define INTC2_INTREQ_OFFSET 0x20
+#define INTC2_INTMSK_OFFSET 0x40
+#define INTC2_INTMSKCLR_OFFSET 0x60
+#define NR_INTC2_IRQS 25
+#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
#define INTC2_BASE 0xfe080000
-#define INTC2_INTC2MODE (INTC2_BASE+0x80)
-
-#define INTC2_INTPRI_OFFSET 0x00
+#define INTC2_FIRST_IRQ 48 /* INTEVT 0x800 */
#define INTC2_INTREQ_OFFSET 0x20
#define INTC2_INTMSK_OFFSET 0x40
#define INTC2_INTMSKCLR_OFFSET 0x60
+#define NR_INTC2_IRQS 64
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+#define INTC2_BASE 0xffd40000
+#define INTC2_FIRST_IRQ 22
+#define INTC2_INTMSK_OFFSET (0x38)
+#define INTC2_INTMSKCLR_OFFSET (0x3c)
+#define NR_INTC2_IRQS 60
+#endif
+
+#define INTC2_INTPRI_OFFSET 0x00
void make_intc2_irq(unsigned int irq,
unsigned int ipr_offset, unsigned int ipr_shift,
@@ -577,13 +587,16 @@ void make_intc2_irq(unsigned int irq,
void init_IRQ_intc2(void);
void intc2_add_clear_irq(int irq, int (*fn)(int));
-#endif /* CONFIG_CPU_SUBTYPE_ST40STB1 */
+#endif
static inline int generic_irq_demux(int irq)
{
return irq;
}
+#ifndef __irq_demux
+#define __irq_demux(irq) (irq)
+#endif
#define irq_canonicalize(irq) (irq)
#define irq_demux(irq) __irq_demux(sh_mv.mv_irq_demux(irq))
diff --git a/include/asm-sh/kexec.h b/include/asm-sh/kexec.h
new file mode 100644
index 000000000000..9dfe59f6fcb5
--- /dev/null
+++ b/include/asm-sh/kexec.h
@@ -0,0 +1,33 @@
+#ifndef _SH_KEXEC_H
+#define _SH_KEXEC_H
+
+/*
+ * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return.
+ * I.e. Maximum page that is mapped directly into kernel memory,
+ * and kmap is not required.
+ *
+ * Someone correct me if FIXADDR_START - PAGEOFFSET is not the correct
+ * calculation for the amount of memory directly mappable into the
+ * kernel memory space.
+ */
+
+/* Maximum physical address we can use pages from */
+#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+/* Maximum address we can reach in physical address mode */
+#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
+/* Maximum address we can use for the control code buffer */
+#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
+
+#define KEXEC_CONTROL_CODE_SIZE 4096
+
+/* The native architecture */
+#define KEXEC_ARCH KEXEC_ARCH_SH
+
+#ifndef __ASSEMBLY__
+
+extern void machine_shutdown(void);
+extern void *crash_notes;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _SH_KEXEC_H */
diff --git a/include/asm-sh/machvec.h b/include/asm-sh/machvec.h
index 3f18aa180516..550c50a7359e 100644
--- a/include/asm-sh/machvec.h
+++ b/include/asm-sh/machvec.h
@@ -18,44 +18,37 @@
#include <asm/machvec_init.h>
struct device;
-struct timeval;
-struct sh_machine_vector
-{
+struct sh_machine_vector {
int mv_nr_irqs;
- unsigned char (*mv_inb)(unsigned long);
- unsigned short (*mv_inw)(unsigned long);
- unsigned int (*mv_inl)(unsigned long);
- void (*mv_outb)(unsigned char, unsigned long);
- void (*mv_outw)(unsigned short, unsigned long);
- void (*mv_outl)(unsigned int, unsigned long);
-
- unsigned char (*mv_inb_p)(unsigned long);
- unsigned short (*mv_inw_p)(unsigned long);
- unsigned int (*mv_inl_p)(unsigned long);
- void (*mv_outb_p)(unsigned char, unsigned long);
- void (*mv_outw_p)(unsigned short, unsigned long);
- void (*mv_outl_p)(unsigned int, unsigned long);
-
- void (*mv_insb)(unsigned long port, void *addr, unsigned long count);
- void (*mv_insw)(unsigned long port, void *addr, unsigned long count);
- void (*mv_insl)(unsigned long port, void *addr, unsigned long count);
- void (*mv_outsb)(unsigned long port, const void *addr, unsigned long count);
- void (*mv_outsw)(unsigned long port, const void *addr, unsigned long count);
- void (*mv_outsl)(unsigned long port, const void *addr, unsigned long count);
-
- unsigned char (*mv_readb)(unsigned long);
- unsigned short (*mv_readw)(unsigned long);
- unsigned int (*mv_readl)(unsigned long);
- void (*mv_writeb)(unsigned char, unsigned long);
- void (*mv_writew)(unsigned short, unsigned long);
- void (*mv_writel)(unsigned int, unsigned long);
-
- void* (*mv_ioremap)(unsigned long offset, unsigned long size);
- void (*mv_iounmap)(void *addr);
-
- unsigned long (*mv_isa_port2addr)(unsigned long offset);
+ u8 (*mv_inb)(unsigned long);
+ u16 (*mv_inw)(unsigned long);
+ u32 (*mv_inl)(unsigned long);
+ void (*mv_outb)(u8, unsigned long);
+ void (*mv_outw)(u16, unsigned long);
+ void (*mv_outl)(u32, unsigned long);
+
+ u8 (*mv_inb_p)(unsigned long);
+ u16 (*mv_inw_p)(unsigned long);
+ u32 (*mv_inl_p)(unsigned long);
+ void (*mv_outb_p)(u8, unsigned long);
+ void (*mv_outw_p)(u16, unsigned long);
+ void (*mv_outl_p)(u32, unsigned long);
+
+ void (*mv_insb)(unsigned long, void *dst, unsigned long count);
+ void (*mv_insw)(unsigned long, void *dst, unsigned long count);
+ void (*mv_insl)(unsigned long, void *dst, unsigned long count);
+ void (*mv_outsb)(unsigned long, const void *src, unsigned long count);
+ void (*mv_outsw)(unsigned long, const void *src, unsigned long count);
+ void (*mv_outsl)(unsigned long, const void *src, unsigned long count);
+
+ u8 (*mv_readb)(void __iomem *);
+ u16 (*mv_readw)(void __iomem *);
+ u32 (*mv_readl)(void __iomem *);
+ void (*mv_writeb)(u8, void __iomem *);
+ void (*mv_writew)(u16, void __iomem *);
+ void (*mv_writel)(u32, void __iomem *);
int (*mv_irq_demux)(int irq);
@@ -66,6 +59,9 @@ struct sh_machine_vector
void *(*mv_consistent_alloc)(struct device *, size_t, dma_addr_t *, gfp_t);
int (*mv_consistent_free)(struct device *, size_t, void *, dma_addr_t);
+
+ void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size);
+ void (*mv_ioport_unmap)(void __iomem *);
};
extern struct sh_machine_vector sh_mv;
diff --git a/include/asm-sh/timer.h b/include/asm-sh/timer.h
new file mode 100644
index 000000000000..dd6579c0b04c
--- /dev/null
+++ b/include/asm-sh/timer.h
@@ -0,0 +1,42 @@
+#ifndef __ASM_SH_TIMER_H
+#define __ASM_SH_TIMER_H
+
+#include <linux/sysdev.h>
+#include <asm/cpu/timer.h>
+
+struct sys_timer_ops {
+ int (*init)(void);
+ unsigned long (*get_offset)(void);
+ unsigned long (*get_frequency)(void);
+};
+
+struct sys_timer {
+ const char *name;
+
+ struct sys_device dev;
+ struct sys_timer_ops *ops;
+};
+
+#define TICK_SIZE (tick_nsec / 1000)
+
+extern struct sys_timer tmu_timer;
+extern struct sys_timer *sys_timer;
+
+static inline unsigned long get_timer_offset(void)
+{
+ return sys_timer->ops->get_offset();
+}
+
+static inline unsigned long get_timer_frequency(void)
+{
+ return sys_timer->ops->get_frequency();
+}
+
+/* arch/sh/kernel/timers/timer.c */
+struct sys_timer *get_sys_timer(void);
+
+/* arch/sh/kernel/time.c */
+void handle_timer_tick(struct pt_regs *);
+
+#endif /* __ASM_SH_TIMER_H */
+
diff --git a/include/asm-x86_64/ia32.h b/include/asm-x86_64/ia32.h
index c7bc9c0525ba..e6b7f2234e43 100644
--- a/include/asm-x86_64/ia32.h
+++ b/include/asm-x86_64/ia32.h
@@ -169,6 +169,8 @@ int ia32_child_tls(struct task_struct *p, struct pt_regs *childregs);
struct linux_binprm;
extern int ia32_setup_arg_pages(struct linux_binprm *bprm,
unsigned long stack_top, int exec_stack);
+struct mm_struct;
+extern void ia32_pick_mmap_layout(struct mm_struct *mm);
#endif
diff --git a/include/asm-x86_64/irq.h b/include/asm-x86_64/irq.h
index fb724ba37ae6..9db5a1b4f7b1 100644
--- a/include/asm-x86_64/irq.h
+++ b/include/asm-x86_64/irq.h
@@ -36,7 +36,7 @@
#define NR_IRQ_VECTORS NR_IRQS
#else
#define NR_IRQS 224
-#define NR_IRQ_VECTORS 1024
+#define NR_IRQ_VECTORS (32 * NR_CPUS)
#endif
static __inline__ int irq_canonicalize(int irq)
diff --git a/include/asm-x86_64/page.h b/include/asm-x86_64/page.h
index dcbb4fcd9a18..615e3e494929 100644
--- a/include/asm-x86_64/page.h
+++ b/include/asm-x86_64/page.h
@@ -26,6 +26,13 @@
#define IRQSTACK_ORDER 2
#define IRQSTACKSIZE (PAGE_SIZE << IRQSTACK_ORDER)
+#define STACKFAULT_STACK 1
+#define DOUBLEFAULT_STACK 2
+#define NMI_STACK 3
+#define DEBUG_STACK 4
+#define MCE_STACK 5
+#define N_EXCEPTION_STACKS 5 /* hw limit: 7 */
+
#define LARGE_PAGE_MASK (~(LARGE_PAGE_SIZE-1))
#define LARGE_PAGE_SIZE (1UL << PMD_SHIFT)
diff --git a/include/asm-x86_64/processor.h b/include/asm-x86_64/processor.h
index 87a282b1043a..8c8d88c036ed 100644
--- a/include/asm-x86_64/processor.h
+++ b/include/asm-x86_64/processor.h
@@ -273,13 +273,6 @@ struct thread_struct {
#define INIT_MMAP \
{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL }
-#define STACKFAULT_STACK 1
-#define DOUBLEFAULT_STACK 2
-#define NMI_STACK 3
-#define DEBUG_STACK 4
-#define MCE_STACK 5
-#define N_EXCEPTION_STACKS 5 /* hw limit: 7 */
-
#define start_thread(regs,new_rip,new_rsp) do { \
asm volatile("movl %0,%%fs; movl %0,%%es; movl %0,%%ds": :"r" (0)); \
load_gs_index(0); \
@@ -484,4 +477,6 @@ extern unsigned long boot_option_idle_override;
/* Boot loader type from the setup header */
extern int bootloader_type;
+#define HAVE_ARCH_PICK_MMAP_LAYOUT 1
+
#endif /* __ASM_X86_64_PROCESSOR_H */
diff --git a/include/asm-x86_64/system.h b/include/asm-x86_64/system.h
index 0eacbefb7dd0..a73f0c789d8b 100644
--- a/include/asm-x86_64/system.h
+++ b/include/asm-x86_64/system.h
@@ -354,11 +354,6 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
#define local_irq_disable() __asm__ __volatile__("cli": : :"memory")
#define local_irq_enable() __asm__ __volatile__("sti": : :"memory")
-/* used in the idle loop; sti takes one instruction cycle to complete */
-#define safe_halt() __asm__ __volatile__("sti; hlt": : :"memory")
-/* used when interrupts are already enabled or to shutdown the processor */
-#define halt() __asm__ __volatile__("hlt": : :"memory")
-
#define irqs_disabled() \
({ \
unsigned long flags; \
@@ -370,6 +365,11 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
#define local_irq_save(x) do { warn_if_not_ulong(x); __asm__ __volatile__("# local_irq_save \n\t pushfq ; popq %0 ; cli":"=g" (x): /* no input */ :"memory"); } while (0)
#endif
+/* used in the idle loop; sti takes one instruction cycle to complete */
+#define safe_halt() __asm__ __volatile__("sti; hlt": : :"memory")
+/* used when interrupts are already enabled or to shutdown the processor */
+#define halt() __asm__ __volatile__("hlt": : :"memory")
+
void cpu_idle_wait(void);
extern unsigned long arch_align_stack(unsigned long sp);
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 552cedfa6064..b77f2608eef9 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1290,6 +1290,9 @@ extern void mnt_set_mountpoint(struct vfsmount *, struct dentry *,
extern int vfs_statfs(struct super_block *, struct kstatfs *);
+/* /sys/fs */
+extern struct subsystem fs_subsys;
+
#define FLOCK_VERIFY_READ 1
#define FLOCK_VERIFY_WRITE 2
diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h
index 6ff2d365895f..474c8f4f5d4f 100644
--- a/include/linux/i2c-id.h
+++ b/include/linux/i2c-id.h
@@ -104,6 +104,10 @@
#define I2C_DRIVERID_AKITAIOEXP 74 /* IO Expander on Sharp SL-C1000 */
#define I2C_DRIVERID_INFRARED 75 /* I2C InfraRed on Video boards */
#define I2C_DRIVERID_TVP5150 76 /* TVP5150 video decoder */
+#define I2C_DRIVERID_WM8739 77 /* wm8739 audio processor */
+#define I2C_DRIVERID_UPD64083 78 /* upd64083 video processor */
+#define I2C_DRIVERID_UPD64031A 79 /* upd64031a video processor */
+#define I2C_DRIVERID_SAA717X 80 /* saa717x video encoder */
#define I2C_DRIVERID_I2CDEV 900
#define I2C_DRIVERID_ARP 902 /* SMBus ARP Client */
diff --git a/include/linux/init.h b/include/linux/init.h
index 59008c3826cf..ff8d8b8632f4 100644
--- a/include/linux/init.h
+++ b/include/linux/init.h
@@ -241,6 +241,18 @@ void __init parse_early_param(void);
#define __cpuexitdata __exitdata
#endif
+#ifdef CONFIG_MEMORY_HOTPLUG
+#define __meminit
+#define __meminitdata
+#define __memexit
+#define __memexitdata
+#else
+#define __meminit __init
+#define __meminitdata __initdata
+#define __memexit __exit
+#define __memexitdata __exitdata
+#endif
+
/* Functions marked as __devexit may be discarded at kernel link time, depending
on config options. Newer versions of binutils detect references from
retained sections to discarded sections and flag an error. Pointers to
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index 94abc07cb164..a311f58c8a7c 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -119,6 +119,7 @@ extern struct kimage *kexec_image;
#define KEXEC_ARCH_PPC64 (21 << 16)
#define KEXEC_ARCH_IA_64 (50 << 16)
#define KEXEC_ARCH_S390 (22 << 16)
+#define KEXEC_ARCH_SH (42 << 16)
#define KEXEC_FLAGS (KEXEC_ON_CRASH) /* List of defined/legal kexec flags */
diff --git a/include/media/tuner-types.h b/include/media/tuner-types.h
new file mode 100644
index 000000000000..15821ab14a9e
--- /dev/null
+++ b/include/media/tuner-types.h
@@ -0,0 +1,55 @@
+/*
+ * descriptions for simple tuners.
+ */
+
+#ifndef __TUNER_TYPES_H__
+#define __TUNER_TYPES_H__
+
+enum param_type {
+ TUNER_PARAM_TYPE_RADIO, \
+ TUNER_PARAM_TYPE_PAL, \
+ TUNER_PARAM_TYPE_SECAM, \
+ TUNER_PARAM_TYPE_NTSC
+};
+
+struct tuner_range {
+ unsigned short limit;
+ unsigned char cb;
+};
+
+struct tuner_params {
+ enum param_type type;
+ /* Many Philips based tuners have a comment like this in their
+ * datasheet:
+ *
+ * For channel selection involving band switching, and to ensure
+ * smooth tuning to the desired channel without causing
+ * unnecessary charge pump action, it is recommended to consider
+ * the difference between wanted channel frequency and the
+ * current channel frequency. Unnecessary charge pump action
+ * will result in very low tuning voltage which may drive the
+ * oscillator to extreme conditions.
+ *
+ * Set cb_first_if_lower_freq to 1, if this check is
+ * required for this tuner.
+ *
+ * I tested this for PAL by first setting the TV frequency to
+ * 203 MHz and then switching to 96.6 MHz FM radio. The result was
+ * static unless the control byte was sent first.
+ */
+ unsigned int cb_first_if_lower_freq:1;
+ unsigned char config; /* to be moved into struct tuner_range for dvb-pll merge */
+
+ unsigned int count;
+ struct tuner_range *ranges;
+};
+
+struct tunertype {
+ char *name;
+ struct tuner_params *params;
+};
+
+extern struct tunertype tuners[];
+extern unsigned const int tuner_count;
+
+#endif
diff --git a/include/media/tuner.h b/include/media/tuner.h
index 27cbf08c931d..a5beeac495c7 100644
--- a/include/media/tuner.h
+++ b/include/media/tuner.h
@@ -23,6 +23,7 @@
#define _TUNER_H
#include <linux/videodev2.h>
+#include <media/tuner-types.h>
#define ADDR_UNSET (255)
@@ -114,6 +115,7 @@
#define TUNER_PHILIPS_TUV1236D 68 /* ATI HDTV Wonder */
#define TUNER_TNF_5335MF 69 /* Sabrent Bt848 */
+#define TUNER_SAMSUNG_TCPN_2121P30A 70 /* Hauppauge PVR-500MCE NTSC */
/* tv card specific */
#define TDA9887_PRESENT (1<<0)
@@ -177,7 +179,9 @@ struct tuner {
unsigned int mode;
unsigned int mode_mask; /* Combination of allowable modes */
- unsigned int freq; /* keep track of the current settings */
+ unsigned int tv_freq; /* keep track of the current settings */
+ unsigned int radio_freq;
+ u16 last_div;
unsigned int audmode;
v4l2_std_id std;
@@ -195,8 +199,8 @@ struct tuner {
unsigned int sgIF;
/* function ptrs */
- void (*tv_freq)(struct i2c_client *c, unsigned int freq);
- void (*radio_freq)(struct i2c_client *c, unsigned int freq);
+ void (*set_tv_freq)(struct i2c_client *c, unsigned int freq);
+ void (*set_radio_freq)(struct i2c_client *c, unsigned int freq);
int (*has_signal)(struct i2c_client *c);
int (*is_stereo)(struct i2c_client *c);
void (*standby)(struct i2c_client *c);
diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index c74052abb189..d4030a7e16e0 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -120,6 +120,13 @@ enum v4l2_chip_ident {
/* select from TV,radio,extern,MUTE */
#define AUDC_SET_INPUT _IOW('d',89,int)
+/* msp3400 ioctl: will be removed in the near future */
+struct msp_matrix {
+ int input;
+ int output;
+};
+#define MSP_SET_MATRIX _IOW('m',17,struct msp_matrix)
+
/* tuner ioctls */
/* Sets tuner type and its I2C addr */
#define TUNER_SET_TYPE_ADDR _IOW('d',90,int)
diff --git a/init/Kconfig b/init/Kconfig
index 7efa729d2cf4..b9923b1434a2 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -427,6 +427,9 @@ config SLOB
default !SLAB
bool
+config OBSOLETE_INTERMODULE
+ tristate
+
menu "Loadable module support"
config MODULES
diff --git a/kernel/Makefile b/kernel/Makefile
index 355126606d1b..4ae0fbde815d 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -6,7 +6,7 @@ obj-y = sched.o fork.o exec_domain.o panic.o printk.o profile.o \
exit.o itimer.o time.o softirq.o resource.o \
sysctl.o capability.o ptrace.o timer.o user.o \
signal.o sys.o kmod.o workqueue.o pid.o \
- rcupdate.o intermodule.o extable.o params.o posix-timers.o \
+ rcupdate.o extable.o params.o posix-timers.o \
kthread.o wait.o kfifo.o sys_ni.o posix-cpu-timers.o mutex.o \
hrtimer.o
@@ -17,6 +17,7 @@ obj-$(CONFIG_SMP) += cpu.o spinlock.o
obj-$(CONFIG_DEBUG_SPINLOCK) += spinlock.o
obj-$(CONFIG_UID16) += uid16.o
obj-$(CONFIG_MODULES) += module.o
+obj-$(CONFIG_OBSOLETE_INTERMODULE) += intermodule.o
obj-$(CONFIG_KALLSYMS) += kallsyms.o
obj-$(CONFIG_PM) += power/
obj-$(CONFIG_BSD_PROCESS_ACCT) += acct.o
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index 04ccab099e84..f1c4155b49ac 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -272,7 +272,7 @@ void unlock_hrtimer_base(const struct hrtimer *timer, unsigned long *flags)
* @interval: the interval to forward
*
* Forward the timer expiry so it will expire in the future.
- * The number of overruns is added to the overrun field.
+ * Returns the number of overruns.
*/
unsigned long
hrtimer_forward(struct hrtimer *timer, ktime_t interval)
@@ -641,7 +641,8 @@ schedule_hrtimer_interruptible(struct hrtimer *timer,
static long __sched
nanosleep_restart(struct restart_block *restart, clockid_t clockid)
{
- struct timespec __user *rmtp, tu;
+ struct timespec __user *rmtp;
+ struct timespec tu;
void *rfn_save = restart->fn;
struct hrtimer timer;
ktime_t rem;
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 8c960b469593..c2e29743a8d1 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -1735,7 +1735,7 @@ static void __init calculate_zone_totalpages(struct pglist_data *pgdat,
* up by free_all_bootmem() once the early boot process is
* done. Non-atomic initialization, single-pass.
*/
-void __devinit memmap_init_zone(unsigned long size, int nid, unsigned long zone,
+void __meminit memmap_init_zone(unsigned long size, int nid, unsigned long zone,
unsigned long start_pfn)
{
struct page *page;
@@ -1788,7 +1788,7 @@ void zonetable_add(struct zone *zone, int nid, int zid, unsigned long pfn,
memmap_init_zone((size), (nid), (zone), (start_pfn))
#endif
-static int __devinit zone_batchsize(struct zone *zone)
+static int __meminit zone_batchsize(struct zone *zone)
{
int batch;
@@ -1882,7 +1882,7 @@ static struct per_cpu_pageset
* Dynamically allocate memory for the
* per cpu pageset array in struct zone.
*/
-static int __devinit process_zones(int cpu)
+static int __meminit process_zones(int cpu)
{
struct zone *zone, *dzone;
@@ -1923,7 +1923,7 @@ static inline void free_zone_pagesets(int cpu)
}
}
-static int __devinit pageset_cpuup_callback(struct notifier_block *nfb,
+static int __meminit pageset_cpuup_callback(struct notifier_block *nfb,
unsigned long action,
void *hcpu)
{
@@ -1963,7 +1963,7 @@ void __init setup_per_cpu_pageset(void)
#endif
-static __devinit
+static __meminit
void zone_wait_table_init(struct zone *zone, unsigned long zone_size_pages)
{
int i;
@@ -1983,7 +1983,7 @@ void zone_wait_table_init(struct zone *zone, unsigned long zone_size_pages)
init_waitqueue_head(zone->wait_table + i);
}
-static __devinit void zone_pcp_init(struct zone *zone)
+static __meminit void zone_pcp_init(struct zone *zone)
{
int cpu;
unsigned long batch = zone_batchsize(zone);
@@ -2001,7 +2001,7 @@ static __devinit void zone_pcp_init(struct zone *zone)
zone->name, zone->present_pages, batch);
}
-static __devinit void init_currently_empty_zone(struct zone *zone,
+static __meminit void init_currently_empty_zone(struct zone *zone,
unsigned long zone_start_pfn, unsigned long size)
{
struct pglist_data *pgdat = zone->zone_pgdat;
diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c
index ccd45130c482..b0cbbe2e41bb 100644
--- a/scripts/kconfig/confdata.c
+++ b/scripts/kconfig/confdata.c
@@ -375,7 +375,7 @@ int conf_write(const char *name)
if (!out_h)
return 1;
}
- sym = sym_lookup("KERNELRELEASE", 0);
+ sym = sym_lookup("KERNELVERSION", 0);
sym_calc_value(sym);
time(&now);
env = getenv("KCONFIG_NOTIMESTAMP");
diff --git a/scripts/kconfig/gconf.c b/scripts/kconfig/gconf.c
index 9f5aabd58fa9..665bd5300a19 100644
--- a/scripts/kconfig/gconf.c
+++ b/scripts/kconfig/gconf.c
@@ -276,7 +276,7 @@ void init_main_window(const gchar * glade_file)
NULL);
sprintf(title, _("Linux Kernel v%s Configuration"),
- getenv("KERNELRELEASE"));
+ getenv("KERNELVERSION"));
gtk_window_set_title(GTK_WINDOW(main_wnd), title);
gtk_widget_show(main_wnd);
diff --git a/scripts/kconfig/lxdialog/Makefile b/scripts/kconfig/lxdialog/Makefile
index 8f41d9a57aaa..fae3e29fc924 100644
--- a/scripts/kconfig/lxdialog/Makefile
+++ b/scripts/kconfig/lxdialog/Makefile
@@ -1,9 +1,9 @@
# Makefile to build lxdialog package
#
-check-lxdialog := $(srctree)/$(src)/check-lxdialog.sh
-HOST_EXTRACFLAGS := $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
-HOST_LOADLIBES := $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags)
+check-lxdialog := $(srctree)/$(src)/check-lxdialog.sh
+HOST_EXTRACFLAGS:= $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
+HOST_LOADLIBES := $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
HOST_EXTRACFLAGS += -DLOCALE
diff --git a/scripts/kconfig/lxdialog/check-lxdialog.sh b/scripts/kconfig/lxdialog/check-lxdialog.sh
index a3c141b49670..448e353923f3 100644
--- a/scripts/kconfig/lxdialog/check-lxdialog.sh
+++ b/scripts/kconfig/lxdialog/check-lxdialog.sh
@@ -4,11 +4,22 @@
# What library to link
ldflags()
{
- if [ `uname` == SunOS ]; then
- echo '-lcurses'
- else
+ echo "main() {}" | $cc -lncursesw -xc - -o /dev/null 2> /dev/null
+ if [ $? -eq 0 ]; then
+ echo '-lncursesw'
+ exit
+ fi
+ echo "main() {}" | $cc -lncurses -xc - -o /dev/null 2> /dev/null
+ if [ $? -eq 0 ]; then
echo '-lncurses'
+ exit
fi
+ echo "main() {}" | $cc -lcurses -xc - -o /dev/null 2> /dev/null
+ if [ $? -eq 0 ]; then
+ echo '-lcurses'
+ exit
+ fi
+ exit 1
}
# Where is ncurses.h?
@@ -28,7 +39,7 @@ ccflags()
compiler=""
# Check if we can link to ncurses
check() {
- echo "main() {}" | $compiler -xc -
+ echo "main() {}" | $cc -xc - -o /dev/null 2> /dev/null
if [ $? != 0 ]; then
echo " *** Unable to find the ncurses libraries." 1>&2
echo " *** make menuconfig require the ncurses libraries" 1>&2
@@ -51,13 +62,15 @@ fi
case "$1" in
"-check")
shift
- compiler="$@"
+ cc="$@"
check
;;
"-ccflags")
ccflags
;;
"-ldflags")
+ shift
+ cc="$@"
ldflags
;;
"*")
diff --git a/scripts/kconfig/mconf.c b/scripts/kconfig/mconf.c
index d63d7fb677e4..7f973195e79a 100644
--- a/scripts/kconfig/mconf.c
+++ b/scripts/kconfig/mconf.c
@@ -1051,7 +1051,7 @@ int main(int ac, char **av)
conf_parse(av[1]);
conf_read(NULL);
- sym = sym_lookup("KERNELRELEASE", 0);
+ sym = sym_lookup("KERNELVERSION", 0);
sym_calc_value(sym);
sprintf(menu_backtitle, _("Linux Kernel v%s Configuration"),
sym_get_string_value(sym));
diff --git a/scripts/kconfig/symbol.c b/scripts/kconfig/symbol.c
index 69c2549c0baa..3d7877afccd5 100644
--- a/scripts/kconfig/symbol.c
+++ b/scripts/kconfig/symbol.c
@@ -61,10 +61,10 @@ void sym_init(void)
if (p)
sym_add_default(sym, p);
- sym = sym_lookup("KERNELRELEASE", 0);
+ sym = sym_lookup("KERNELVERSION", 0);
sym->type = S_STRING;
sym->flags |= SYMBOL_AUTO;
- p = getenv("KERNELRELEASE");
+ p = getenv("KERNELVERSION");
if (p)
sym_add_default(sym, p);