summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/x86/kernel/aperture_64.c283
-rw-r--r--arch/x86/kernel/pci-dma.c11
-rw-r--r--arch/x86/kernel/pci-gart_64.c23
-rw-r--r--drivers/char/agp/amd64-agp.c73
-rw-r--r--include/asm-x86/gart.h38
5 files changed, 268 insertions, 160 deletions
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 479926d9e004..02f4dbaa4df4 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -35,6 +35,18 @@ int fallback_aper_force __initdata;
int fix_aperture __initdata = 1;
+struct bus_dev_range {
+ int bus;
+ int dev_base;
+ int dev_limit;
+};
+
+static struct bus_dev_range bus_dev_ranges[] __initdata = {
+ { 0x00, 0x18, 0x20},
+ { 0xff, 0x00, 0x20},
+ { 0xfe, 0x00, 0x20}
+};
+
static struct resource gart_resource = {
.name = "GART",
.flags = IORESOURCE_MEM,
@@ -55,8 +67,9 @@ static u32 __init allocate_aperture(void)
u32 aper_size;
void *p;
- if (fallback_aper_order > 7)
- fallback_aper_order = 7;
+ /* aper_size should <= 1G */
+ if (fallback_aper_order > 5)
+ fallback_aper_order = 5;
aper_size = (32 * 1024 * 1024) << fallback_aper_order;
/*
@@ -65,7 +78,20 @@ static u32 __init allocate_aperture(void)
* memory. Unfortunately we cannot move it up because that would
* make the IOMMU useless.
*/
- p = __alloc_bootmem_nopanic(aper_size, aper_size, 0);
+ /*
+ * using 512M as goal, in case kexec will load kernel_big
+ * that will do the on position decompress, and could overlap with
+ * that positon with gart that is used.
+ * sequende:
+ * kernel_small
+ * ==> kexec (with kdump trigger path or previous doesn't shutdown gart)
+ * ==> kernel_small(gart area become e820_reserved)
+ * ==> kexec (with kdump trigger path or previous doesn't shutdown gart)
+ * ==> kerne_big (uncompressed size will be big than 64M or 128M)
+ * so don't use 512M below as gart iommu, leave the space for kernel
+ * code for safe
+ */
+ p = __alloc_bootmem_nopanic(aper_size, aper_size, 512ULL<<20);
if (!p || __pa(p)+aper_size > 0xffffffff) {
printk(KERN_ERR
"Cannot allocate aperture memory hole (%p,%uK)\n",
@@ -83,7 +109,7 @@ static u32 __init allocate_aperture(void)
return (u32)__pa(p);
}
-static int __init aperture_valid(u64 aper_base, u32 aper_size)
+static int __init aperture_valid(u64 aper_base, u32 aper_size, u32 min_size)
{
if (!aper_base)
return 0;
@@ -96,8 +122,9 @@ static int __init aperture_valid(u64 aper_base, u32 aper_size)
printk(KERN_ERR "Aperture pointing to e820 RAM. Ignoring.\n");
return 0;
}
- if (aper_size < 64*1024*1024) {
- printk(KERN_ERR "Aperture too small (%d MB)\n", aper_size>>20);
+ if (aper_size < min_size) {
+ printk(KERN_ERR "Aperture too small (%d MB) than (%d MB)\n",
+ aper_size>>20, min_size>>20);
return 0;
}
@@ -105,47 +132,51 @@ static int __init aperture_valid(u64 aper_base, u32 aper_size)
}
/* Find a PCI capability */
-static __u32 __init find_cap(int num, int slot, int func, int cap)
+static __u32 __init find_cap(int bus, int slot, int func, int cap)
{
int bytes;
u8 pos;
- if (!(read_pci_config_16(num, slot, func, PCI_STATUS) &
+ if (!(read_pci_config_16(bus, slot, func, PCI_STATUS) &
PCI_STATUS_CAP_LIST))
return 0;
- pos = read_pci_config_byte(num, slot, func, PCI_CAPABILITY_LIST);
+ pos = read_pci_config_byte(bus, slot, func, PCI_CAPABILITY_LIST);
for (bytes = 0; bytes < 48 && pos >= 0x40; bytes++) {
u8 id;
pos &= ~3;
- id = read_pci_config_byte(num, slot, func, pos+PCI_CAP_LIST_ID);
+ id = read_pci_config_byte(bus, slot, func, pos+PCI_CAP_LIST_ID);
if (id == 0xff)
break;
if (id == cap)
return pos;
- pos = read_pci_config_byte(num, slot, func,
+ pos = read_pci_config_byte(bus, slot, func,
pos+PCI_CAP_LIST_NEXT);
}
return 0;
}
/* Read a standard AGPv3 bridge header */
-static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order)
+static __u32 __init read_agp(int bus, int slot, int func, int cap, u32 *order)
{
u32 apsize;
u32 apsizereg;
int nbits;
u32 aper_low, aper_hi;
u64 aper;
+ u32 old_order;
- printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", num, slot, func);
- apsizereg = read_pci_config_16(num, slot, func, cap + 0x14);
+ printk(KERN_INFO "AGP bridge at %02x:%02x:%02x\n", bus, slot, func);
+ apsizereg = read_pci_config_16(bus, slot, func, cap + 0x14);
if (apsizereg == 0xffffffff) {
printk(KERN_ERR "APSIZE in AGP bridge unreadable\n");
return 0;
}
+ /* old_order could be the value from NB gart setting */
+ old_order = *order;
+
apsize = apsizereg & 0xfff;
/* Some BIOS use weird encodings not in the AGPv3 table. */
if (apsize & 0xff)
@@ -155,14 +186,26 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order)
if ((int)*order < 0) /* < 32MB */
*order = 0;
- aper_low = read_pci_config(num, slot, func, 0x10);
- aper_hi = read_pci_config(num, slot, func, 0x14);
+ aper_low = read_pci_config(bus, slot, func, 0x10);
+ aper_hi = read_pci_config(bus, slot, func, 0x14);
aper = (aper_low & ~((1<<22)-1)) | ((u64)aper_hi << 32);
+ /*
+ * On some sick chips, APSIZE is 0. It means it wants 4G
+ * so let double check that order, and lets trust AMD NB settings:
+ */
+ printk(KERN_INFO "Aperture from AGP @ %Lx old size %u MB\n",
+ aper, 32 << old_order);
+ if (aper + (32ULL<<(20 + *order)) > 0x100000000ULL) {
+ printk(KERN_INFO "Aperture size %u MB (APSIZE %x) is not right, using settings from NB\n",
+ 32 << *order, apsizereg);
+ *order = old_order;
+ }
+
printk(KERN_INFO "Aperture from AGP @ %Lx size %u MB (APSIZE %x)\n",
aper, 32 << *order, apsizereg);
- if (!aperture_valid(aper, (32*1024*1024) << *order))
+ if (!aperture_valid(aper, (32*1024*1024) << *order, 32<<20))
return 0;
return (u32)aper;
}
@@ -182,15 +225,15 @@ static __u32 __init read_agp(int num, int slot, int func, int cap, u32 *order)
*/
static __u32 __init search_agp_bridge(u32 *order, int *valid_agp)
{
- int num, slot, func;
+ int bus, slot, func;
/* Poor man's PCI discovery */
- for (num = 0; num < 256; num++) {
+ for (bus = 0; bus < 256; bus++) {
for (slot = 0; slot < 32; slot++) {
for (func = 0; func < 8; func++) {
u32 class, cap;
u8 type;
- class = read_pci_config(num, slot, func,
+ class = read_pci_config(bus, slot, func,
PCI_CLASS_REVISION);
if (class == 0xffffffff)
break;
@@ -199,17 +242,17 @@ static __u32 __init search_agp_bridge(u32 *order, int *valid_agp)
case PCI_CLASS_BRIDGE_HOST:
case PCI_CLASS_BRIDGE_OTHER: /* needed? */
/* AGP bridge? */
- cap = find_cap(num, slot, func,
+ cap = find_cap(bus, slot, func,
PCI_CAP_ID_AGP);
if (!cap)
break;
*valid_agp = 1;
- return read_agp(num, slot, func, cap,
+ return read_agp(bus, slot, func, cap,
order);
}
/* No multi-function device? */
- type = read_pci_config_byte(num, slot, func,
+ type = read_pci_config_byte(bus, slot, func,
PCI_HEADER_TYPE);
if (!(type & 0x80))
break;
@@ -249,38 +292,49 @@ void __init early_gart_iommu_check(void)
* or BIOS forget to put that in reserved.
* try to update e820 to make that region as reserved.
*/
- int fix, num;
+ int fix, slot;
u32 ctl;
u32 aper_size = 0, aper_order = 0, last_aper_order = 0;
u64 aper_base = 0, last_aper_base = 0;
int aper_enabled = 0, last_aper_enabled = 0;
+ int i;
if (!early_pci_allowed())
return;
fix = 0;
- for (num = 24; num < 32; num++) {
- if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
- continue;
-
- ctl = read_pci_config(0, num, 3, 0x90);
- aper_enabled = ctl & 1;
- aper_order = (ctl >> 1) & 7;
- aper_size = (32 * 1024 * 1024) << aper_order;
- aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff;
- aper_base <<= 25;
-
- if ((last_aper_order && aper_order != last_aper_order) ||
- (last_aper_base && aper_base != last_aper_base) ||
- (last_aper_enabled && aper_enabled != last_aper_enabled)) {
- fix = 1;
- break;
+ for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
+ int bus;
+ int dev_base, dev_limit;
+
+ bus = bus_dev_ranges[i].bus;
+ dev_base = bus_dev_ranges[i].dev_base;
+ dev_limit = bus_dev_ranges[i].dev_limit;
+
+ for (slot = dev_base; slot < dev_limit; slot++) {
+ if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+ continue;
+
+ ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL);
+ aper_enabled = ctl & AMD64_GARTEN;
+ aper_order = (ctl >> 1) & 7;
+ aper_size = (32 * 1024 * 1024) << aper_order;
+ aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff;
+ aper_base <<= 25;
+
+ if ((last_aper_order && aper_order != last_aper_order) ||
+ (last_aper_base && aper_base != last_aper_base) ||
+ (last_aper_enabled && aper_enabled != last_aper_enabled)) {
+ fix = 1;
+ goto out;
+ }
+ last_aper_order = aper_order;
+ last_aper_base = aper_base;
+ last_aper_enabled = aper_enabled;
}
- last_aper_order = aper_order;
- last_aper_base = aper_base;
- last_aper_enabled = aper_enabled;
}
+out:
if (!fix && !aper_enabled)
return;
@@ -288,8 +342,8 @@ void __init early_gart_iommu_check(void)
fix = 1;
if (gart_fix_e820 && !fix && aper_enabled) {
- if (e820_any_mapped(aper_base, aper_base + aper_size,
- E820_RAM)) {
+ if (!e820_all_mapped(aper_base, aper_base + aper_size,
+ E820_RESERVED)) {
/* reserved it, so we can resuse it in second kernel */
printk(KERN_INFO "update e820 for GART\n");
add_memory_region(aper_base, aper_size, E820_RESERVED);
@@ -299,23 +353,35 @@ void __init early_gart_iommu_check(void)
}
/* different nodes have different setting, disable them all at first*/
- for (num = 24; num < 32; num++) {
- if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
- continue;
+ for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
+ int bus;
+ int dev_base, dev_limit;
+
+ bus = bus_dev_ranges[i].bus;
+ dev_base = bus_dev_ranges[i].dev_base;
+ dev_limit = bus_dev_ranges[i].dev_limit;
- ctl = read_pci_config(0, num, 3, 0x90);
- ctl &= ~1;
- write_pci_config(0, num, 3, 0x90, ctl);
+ for (slot = dev_base; slot < dev_limit; slot++) {
+ if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+ continue;
+
+ ctl = read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL);
+ ctl &= ~AMD64_GARTEN;
+ write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, ctl);
+ }
}
}
+static int __initdata printed_gart_size_msg;
+
void __init gart_iommu_hole_init(void)
{
+ u32 agp_aper_base = 0, agp_aper_order = 0;
u32 aper_size, aper_alloc = 0, aper_order = 0, last_aper_order = 0;
u64 aper_base, last_aper_base = 0;
- int fix, num, valid_agp = 0;
- int node;
+ int fix, slot, valid_agp = 0;
+ int i, node;
if (gart_iommu_aperture_disabled || !fix_aperture ||
!early_pci_allowed())
@@ -323,38 +389,63 @@ void __init gart_iommu_hole_init(void)
printk(KERN_INFO "Checking aperture...\n");
+ if (!fallback_aper_force)
+ agp_aper_base = search_agp_bridge(&agp_aper_order, &valid_agp);
+
fix = 0;
node = 0;
- for (num = 24; num < 32; num++) {
- if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
- continue;
-
- iommu_detected = 1;
- gart_iommu_aperture = 1;
-
- aper_order = (read_pci_config(0, num, 3, 0x90) >> 1) & 7;
- aper_size = (32 * 1024 * 1024) << aper_order;
- aper_base = read_pci_config(0, num, 3, 0x94) & 0x7fff;
- aper_base <<= 25;
-
- printk(KERN_INFO "Node %d: aperture @ %Lx size %u MB\n",
- node, aper_base, aper_size >> 20);
- node++;
-
- if (!aperture_valid(aper_base, aper_size)) {
- fix = 1;
- break;
- }
+ for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
+ int bus;
+ int dev_base, dev_limit;
+
+ bus = bus_dev_ranges[i].bus;
+ dev_base = bus_dev_ranges[i].dev_base;
+ dev_limit = bus_dev_ranges[i].dev_limit;
+
+ for (slot = dev_base; slot < dev_limit; slot++) {
+ if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+ continue;
+
+ iommu_detected = 1;
+ gart_iommu_aperture = 1;
+
+ aper_order = (read_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL) >> 1) & 7;
+ aper_size = (32 * 1024 * 1024) << aper_order;
+ aper_base = read_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE) & 0x7fff;
+ aper_base <<= 25;
+
+ printk(KERN_INFO "Node %d: aperture @ %Lx size %u MB\n",
+ node, aper_base, aper_size >> 20);
+ node++;
+
+ if (!aperture_valid(aper_base, aper_size, 64<<20)) {
+ if (valid_agp && agp_aper_base &&
+ agp_aper_base == aper_base &&
+ agp_aper_order == aper_order) {
+ /* the same between two setting from NB and agp */
+ if (!no_iommu && end_pfn > MAX_DMA32_PFN && !printed_gart_size_msg) {
+ printk(KERN_ERR "you are using iommu with agp, but GART size is less than 64M\n");
+ printk(KERN_ERR "please increase GART size in your BIOS setup\n");
+ printk(KERN_ERR "if BIOS doesn't have that option, contact your HW vendor!\n");
+ printed_gart_size_msg = 1;
+ }
+ } else {
+ fix = 1;
+ goto out;
+ }
+ }
- if ((last_aper_order && aper_order != last_aper_order) ||
- (last_aper_base && aper_base != last_aper_base)) {
- fix = 1;
- break;
+ if ((last_aper_order && aper_order != last_aper_order) ||
+ (last_aper_base && aper_base != last_aper_base)) {
+ fix = 1;
+ goto out;
+ }
+ last_aper_order = aper_order;
+ last_aper_base = aper_base;
}
- last_aper_order = aper_order;
- last_aper_base = aper_base;
}
+out:
if (!fix && !fallback_aper_force) {
if (last_aper_base) {
unsigned long n = (32 * 1024 * 1024) << last_aper_order;
@@ -364,8 +455,10 @@ void __init gart_iommu_hole_init(void)
return;
}
- if (!fallback_aper_force)
- aper_alloc = search_agp_bridge(&aper_order, &valid_agp);
+ if (!fallback_aper_force) {
+ aper_alloc = agp_aper_base;
+ aper_order = agp_aper_order;
+ }
if (aper_alloc) {
/* Got the aperture from the AGP bridge */
@@ -401,16 +494,22 @@ void __init gart_iommu_hole_init(void)
}
/* Fix up the north bridges */
- for (num = 24; num < 32; num++) {
- if (!early_is_k8_nb(read_pci_config(0, num, 3, 0x00)))
- continue;
-
- /*
- * Don't enable translation yet. That is done later.
- * Assume this BIOS didn't initialise the GART so
- * just overwrite all previous bits
- */
- write_pci_config(0, num, 3, 0x90, aper_order<<1);
- write_pci_config(0, num, 3, 0x94, aper_alloc>>25);
+ for (i = 0; i < ARRAY_SIZE(bus_dev_ranges); i++) {
+ int bus;
+ int dev_base, dev_limit;
+
+ bus = bus_dev_ranges[i].bus;
+ dev_base = bus_dev_ranges[i].dev_base;
+ dev_limit = bus_dev_ranges[i].dev_limit;
+ for (slot = dev_base; slot < dev_limit; slot++) {
+ if (!early_is_k8_nb(read_pci_config(bus, slot, 3, 0x00)))
+ continue;
+
+ /* Don't enable translation yet. That is done later.
+ Assume this BIOS didn't initialise the GART so
+ just overwrite all previous bits */
+ write_pci_config(bus, slot, 3, AMD64_GARTAPERTURECTL, aper_order << 1);
+ write_pci_config(bus, slot, 3, AMD64_GARTAPERTUREBASE, aper_alloc >> 25);
+ }
}
}
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index c5ef1af8e79d..7747bc82b11d 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -77,10 +77,14 @@ void __init dma32_reserve_bootmem(void)
if (end_pfn <= MAX_DMA32_PFN)
return;
+ /*
+ * check aperture_64.c allocate_aperture() for reason about
+ * using 512M as goal
+ */
align = 64ULL<<20;
size = round_up(dma32_bootmem_size, align);
dma32_bootmem_ptr = __alloc_bootmem_nopanic(size, align,
- __pa(MAX_DMA_ADDRESS));
+ 512ULL<<20);
if (dma32_bootmem_ptr)
dma32_bootmem_size = size;
else
@@ -88,7 +92,6 @@ void __init dma32_reserve_bootmem(void)
}
static void __init dma32_free_bootmem(void)
{
- int node;
if (end_pfn <= MAX_DMA32_PFN)
return;
@@ -96,9 +99,7 @@ static void __init dma32_free_bootmem(void)
if (!dma32_bootmem_ptr)
return;
- for_each_online_node(node)
- free_bootmem_node(NODE_DATA(node), __pa(dma32_bootmem_ptr),
- dma32_bootmem_size);
+ free_bootmem(__pa(dma32_bootmem_ptr), dma32_bootmem_size);
dma32_bootmem_ptr = NULL;
dma32_bootmem_size = 0;
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index c07455d1695f..1f99b62ff616 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -533,8 +533,8 @@ static __init unsigned read_aperture(struct pci_dev *dev, u32 *size)
unsigned aper_size = 0, aper_base_32, aper_order;
u64 aper_base;
- pci_read_config_dword(dev, 0x94, &aper_base_32);
- pci_read_config_dword(dev, 0x90, &aper_order);
+ pci_read_config_dword(dev, AMD64_GARTAPERTUREBASE, &aper_base_32);
+ pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &aper_order);
aper_order = (aper_order >> 1) & 7;
aper_base = aper_base_32 & 0x7fff;
@@ -592,19 +592,8 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
agp_gatt_table = gatt;
for (i = 0; i < num_k8_northbridges; i++) {
- u32 gatt_reg;
- u32 ctl;
-
dev = k8_northbridges[i];
- gatt_reg = __pa(gatt) >> 12;
- gatt_reg <<= 4;
- pci_write_config_dword(dev, 0x98, gatt_reg);
- pci_read_config_dword(dev, 0x90, &ctl);
-
- ctl |= 1;
- ctl &= ~((1<<4) | (1<<5));
-
- pci_write_config_dword(dev, 0x90, ctl);
+ enable_gart_translation(dev, __pa(gatt));
}
flush_gart();
@@ -648,11 +637,11 @@ void gart_iommu_shutdown(void)
u32 ctl;
dev = k8_northbridges[i];
- pci_read_config_dword(dev, 0x90, &ctl);
+ pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl);
- ctl &= ~1;
+ ctl &= ~GARTEN;
- pci_write_config_dword(dev, 0x90, ctl);
+ pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl);
}
}
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index d8200ac8f8cb..e3c7ea07f57c 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -16,28 +16,9 @@
#include <asm/page.h> /* PAGE_SIZE */
#include <asm/e820.h>
#include <asm/k8.h>
+#include <asm/gart.h>
#include "agp.h"
-/* PTE bits. */
-#define GPTE_VALID 1
-#define GPTE_COHERENT 2
-
-/* Aperture control register bits. */
-#define GARTEN (1<<0)
-#define DISGARTCPU (1<<4)
-#define DISGARTIO (1<<5)
-
-/* GART cache control register bits. */
-#define INVGART (1<<0)
-#define GARTPTEERR (1<<1)
-
-/* K8 On-cpu GART registers */
-#define AMD64_GARTAPERTURECTL 0x90
-#define AMD64_GARTAPERTUREBASE 0x94
-#define AMD64_GARTTABLEBASE 0x98
-#define AMD64_GARTCACHECTL 0x9c
-#define AMD64_GARTEN (1<<0)
-
/* NVIDIA K8 registers */
#define NVIDIA_X86_64_0_APBASE 0x10
#define NVIDIA_X86_64_1_APBASE1 0x50
@@ -165,29 +146,18 @@ static int amd64_fetch_size(void)
* In a multiprocessor x86-64 system, this function gets
* called once for each CPU.
*/
-static u64 amd64_configure (struct pci_dev *hammer, u64 gatt_table)
+static u64 amd64_configure(struct pci_dev *hammer, u64 gatt_table)
{
u64 aperturebase;
u32 tmp;
- u64 addr, aper_base;
+ u64 aper_base;
/* Address to map to */
- pci_read_config_dword (hammer, AMD64_GARTAPERTUREBASE, &tmp);
+ pci_read_config_dword(hammer, AMD64_GARTAPERTUREBASE, &tmp);
aperturebase = tmp << 25;
aper_base = (aperturebase & PCI_BASE_ADDRESS_MEM_MASK);
- /* address of the mappings table */
- addr = (u64) gatt_table;
- addr >>= 12;
- tmp = (u32) addr<<4;
- tmp &= ~0xf;
- pci_write_config_dword (hammer, AMD64_GARTTABLEBASE, tmp);
-
- /* Enable GART translation for this hammer. */
- pci_read_config_dword(hammer, AMD64_GARTAPERTURECTL, &tmp);
- tmp |= GARTEN;
- tmp &= ~(DISGARTCPU | DISGARTIO);
- pci_write_config_dword(hammer, AMD64_GARTAPERTURECTL, tmp);
+ enable_gart_translation(hammer, gatt_table);
return aper_base;
}
@@ -226,9 +196,9 @@ static void amd64_cleanup(void)
for (i = 0; i < num_k8_northbridges; i++) {
struct pci_dev *dev = k8_northbridges[i];
/* disable gart translation */
- pci_read_config_dword (dev, AMD64_GARTAPERTURECTL, &tmp);
+ pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &tmp);
tmp &= ~AMD64_GARTEN;
- pci_write_config_dword (dev, AMD64_GARTAPERTURECTL, tmp);
+ pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, tmp);
}
}
@@ -264,11 +234,7 @@ static int __devinit aperture_valid(u64 aper, u32 size)
printk(KERN_ERR PFX "No aperture\n");
return 0;
}
- if (size < 32*1024*1024) {
- printk(KERN_ERR PFX "Aperture too small (%d MB)\n", size>>20);
- return 0;
- }
- if ((u64)aper + size > 0x100000000ULL) {
+ if ((u64)aper + size > 0x100000000ULL) {
printk(KERN_ERR PFX "Aperture out of bounds\n");
return 0;
}
@@ -276,6 +242,10 @@ static int __devinit aperture_valid(u64 aper, u32 size)
printk(KERN_ERR PFX "Aperture pointing to RAM\n");
return 0;
}
+ if (size < 32*1024*1024) {
+ printk(KERN_ERR PFX "Aperture too small (%d MB)\n", size>>20);
+ return 0;
+ }
/* Request the Aperture. This catches cases when someone else
already put a mapping in there - happens with some very broken BIOS
@@ -308,9 +278,9 @@ static __devinit int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp,
u32 nb_order, nb_base;
u16 apsize;
- pci_read_config_dword(nb, 0x90, &nb_order);
+ pci_read_config_dword(nb, AMD64_GARTAPERTURECTL, &nb_order);
nb_order = (nb_order >> 1) & 7;
- pci_read_config_dword(nb, 0x94, &nb_base);
+ pci_read_config_dword(nb, AMD64_GARTAPERTUREBASE, &nb_base);
nb_aper = nb_base << 25;
if (aperture_valid(nb_aper, (32*1024*1024)<<nb_order)) {
return 0;
@@ -331,12 +301,23 @@ static __devinit int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp,
pci_read_config_dword(agp, 0x10, &aper_low);
pci_read_config_dword(agp, 0x14, &aper_hi);
aper = (aper_low & ~((1<<22)-1)) | ((u64)aper_hi << 32);
+
+ /*
+ * On some sick chips APSIZE is 0. This means it wants 4G
+ * so let double check that order, and lets trust the AMD NB settings
+ */
+ if (order >=0 && aper + (32ULL<<(20 + order)) > 0x100000000ULL) {
+ printk(KERN_INFO "Aperture size %u MB is not right, using settings from NB\n",
+ 32 << order);
+ order = nb_order;
+ }
+
printk(KERN_INFO PFX "Aperture from AGP @ %Lx size %u MB\n", aper, 32 << order);
if (order < 0 || !aperture_valid(aper, (32*1024*1024)<<order))
return -1;
- pci_write_config_dword(nb, 0x90, order << 1);
- pci_write_config_dword(nb, 0x94, aper >> 25);
+ pci_write_config_dword(nb, AMD64_GARTAPERTURECTL, order << 1);
+ pci_write_config_dword(nb, AMD64_GARTAPERTUREBASE, aper >> 25);
return 0;
}
diff --git a/include/asm-x86/gart.h b/include/asm-x86/gart.h
index 90958ed993fa..6f22786d2f0c 100644
--- a/include/asm-x86/gart.h
+++ b/include/asm-x86/gart.h
@@ -5,6 +5,7 @@ extern void pci_iommu_shutdown(void);
extern void no_iommu_init(void);
extern int force_iommu, no_iommu;
extern int iommu_detected;
+extern int agp_amd64_init(void);
#ifdef CONFIG_GART_IOMMU
extern void gart_iommu_init(void);
extern void gart_iommu_shutdown(void);
@@ -31,4 +32,41 @@ static inline void gart_iommu_shutdown(void)
#endif
+/* PTE bits. */
+#define GPTE_VALID 1
+#define GPTE_COHERENT 2
+
+/* Aperture control register bits. */
+#define GARTEN (1<<0)
+#define DISGARTCPU (1<<4)
+#define DISGARTIO (1<<5)
+
+/* GART cache control register bits. */
+#define INVGART (1<<0)
+#define GARTPTEERR (1<<1)
+
+/* K8 On-cpu GART registers */
+#define AMD64_GARTAPERTURECTL 0x90
+#define AMD64_GARTAPERTUREBASE 0x94
+#define AMD64_GARTTABLEBASE 0x98
+#define AMD64_GARTCACHECTL 0x9c
+#define AMD64_GARTEN (1<<0)
+
+static inline void enable_gart_translation(struct pci_dev *dev, u64 addr)
+{
+ u32 tmp, ctl;
+
+ /* address of the mappings table */
+ addr >>= 12;
+ tmp = (u32) addr<<4;
+ tmp &= ~0xf;
+ pci_write_config_dword(dev, AMD64_GARTTABLEBASE, tmp);
+
+ /* Enable GART translation for this hammer. */
+ pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &ctl);
+ ctl |= GARTEN;
+ ctl &= ~(DISGARTCPU | DISGARTIO);
+ pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, ctl);
+}
+
#endif