summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/plat-nomadik/gpio.c30
-rw-r--r--arch/arm/plat-nomadik/include/plat/gpio.h2
-rw-r--r--arch/arm/plat-nomadik/include/plat/pincfg.h5
3 files changed, 33 insertions, 4 deletions
diff --git a/arch/arm/plat-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c
index 977c8f9a07a2..014da39b6a88 100644
--- a/arch/arm/plat-nomadik/gpio.c
+++ b/arch/arm/plat-nomadik/gpio.c
@@ -118,8 +118,8 @@ static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset,
[3] /* illegal */ = "??"
};
static const char *slpmnames[] = {
- [NMK_GPIO_SLPM_INPUT] = "input",
- [NMK_GPIO_SLPM_NOCHANGE] = "no-change",
+ [NMK_GPIO_SLPM_INPUT] = "input/wakeup",
+ [NMK_GPIO_SLPM_NOCHANGE] = "no-change/no-wakeup",
};
int pin = PIN_NUM(cfg);
@@ -200,6 +200,10 @@ EXPORT_SYMBOL(nmk_config_pins);
* changed to an input (with pullup/down enabled) in sleep and deep sleep. If
* @mode is NMK_GPIO_SLPM_NOCHANGE, the pin remains in the state it was
* configured even when in sleep and deep sleep.
+ *
+ * On DB8500v2 onwards, this setting loses the previous meaning and instead
+ * indicates if wakeup detection is enabled on the pin. Note that
+ * enable_irq_wake() will automatically enable wakeup detection.
*/
int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode)
{
@@ -367,7 +371,27 @@ static void nmk_gpio_irq_unmask(unsigned int irq)
static int nmk_gpio_irq_set_wake(unsigned int irq, unsigned int on)
{
- return nmk_gpio_irq_modify(irq, WAKE, on);
+ struct nmk_gpio_chip *nmk_chip;
+ unsigned long flags;
+ int gpio;
+
+ gpio = NOMADIK_IRQ_TO_GPIO(irq);
+ nmk_chip = get_irq_chip_data(irq);
+ if (!nmk_chip)
+ return -EINVAL;
+
+ spin_lock_irqsave(&nmk_chip->lock, flags);
+#ifdef CONFIG_ARCH_U8500
+ if (cpu_is_u8500v2()) {
+ __nmk_gpio_set_slpm(nmk_chip, gpio,
+ on ? NMK_GPIO_SLPM_WAKEUP_ENABLE
+ : NMK_GPIO_SLPM_WAKEUP_DISABLE);
+ }
+#endif
+ __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, on);
+ spin_unlock_irqrestore(&nmk_chip->lock, flags);
+
+ return 0;
}
static int nmk_gpio_irq_set_type(unsigned int irq, unsigned int type)
diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h
index aba355101f49..67b113d639d8 100644
--- a/arch/arm/plat-nomadik/include/plat/gpio.h
+++ b/arch/arm/plat-nomadik/include/plat/gpio.h
@@ -65,7 +65,9 @@ enum nmk_gpio_pull {
/* Sleep mode */
enum nmk_gpio_slpm {
NMK_GPIO_SLPM_INPUT,
+ NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT,
NMK_GPIO_SLPM_NOCHANGE,
+ NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE,
};
extern int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode);
diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h
index 7eed11c1038d..432a201b3b41 100644
--- a/arch/arm/plat-nomadik/include/plat/pincfg.h
+++ b/arch/arm/plat-nomadik/include/plat/pincfg.h
@@ -24,7 +24,7 @@
*
* PIN_CFG_DEFAULT - default config (0):
* pull up/down = disabled
- * sleep mode = input
+ * sleep mode = input/wakeup
*
* PIN_CFG - default config with alternate function
* PIN_CFG_PULL - default config with alternate function and pull up/down
@@ -55,6 +55,9 @@ typedef unsigned long pin_cfg_t;
#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT)
#define PIN_SLPM_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT)
#define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT)
+/* These two replace the above in DB8500v2+ */
+#define PIN_SLPM_WAKEUP_ENABLE (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT)
+#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT)
#define PIN_CFG_DEFAULT (PIN_PULL_NONE | PIN_SLPM_INPUT)