diff options
147 files changed, 1397 insertions, 768 deletions
diff --git a/Documentation/networking/e1000.txt b/Documentation/networking/e1000.txt index 2df71861e578..d9271e74e488 100644 --- a/Documentation/networking/e1000.txt +++ b/Documentation/networking/e1000.txt @@ -1,82 +1,35 @@ Linux* Base Driver for the Intel(R) PRO/1000 Family of Adapters =============================================================== -September 26, 2006 - +Intel Gigabit Linux driver. +Copyright(c) 1999 - 2010 Intel Corporation. Contents ======== -- In This Release - Identifying Your Adapter -- Building and Installation - Command Line Parameters - Speed and Duplex Configuration - Additional Configurations -- Known Issues - Support - -In This Release -=============== - -This file describes the Linux* Base Driver for the Intel(R) PRO/1000 Family -of Adapters. This driver includes support for Itanium(R)2-based systems. - -For questions related to hardware requirements, refer to the documentation -supplied with your Intel PRO/1000 adapter. All hardware requirements listed -apply to use with Linux. - -The following features are now available in supported kernels: - - Native VLANs - - Channel Bonding (teaming) - - SNMP - -Channel Bonding documentation can be found in the Linux kernel source: -/Documentation/networking/bonding.txt - -The driver information previously displayed in the /proc filesystem is not -supported in this release. Alternatively, you can use ethtool (version 1.6 -or later), lspci, and ifconfig to obtain the same information. - -Instructions on updating ethtool can be found in the section "Additional -Configurations" later in this document. - -NOTE: The Intel(R) 82562v 10/100 Network Connection only provides 10/100 -support. - - Identifying Your Adapter ======================== For more information on how to identify your adapter, go to the Adapter & Driver ID Guide at: - http://support.intel.com/support/network/adapter/pro100/21397.htm + http://support.intel.com/support/go/network/adapter/idguide.htm For the latest Intel network drivers for Linux, refer to the following website. In the search field, enter your adapter name or type, or use the networking link on the left to search for your adapter: - http://downloadfinder.intel.com/scripts-df/support_intel.asp - + http://support.intel.com/support/go/network/adapter/home.htm Command Line Parameters ======================= -If the driver is built as a module, the following optional parameters -are used by entering them on the command line with the modprobe command -using this syntax: - - modprobe e1000 [<option>=<VAL1>,<VAL2>,...] - -For example, with two PRO/1000 PCI adapters, entering: - - modprobe e1000 TxDescriptors=80,128 - -loads the e1000 driver with 80 TX descriptors for the first adapter and -128 TX descriptors for the second adapter. - The default value for each parameter is generally the recommended setting, unless otherwise noted. @@ -89,10 +42,6 @@ NOTES: For more information about the AutoNeg, Duplex, and Speed parameters, see the application note at: http://www.intel.com/design/network/applnots/ap450.htm - A descriptor describes a data buffer and attributes related to - the data buffer. This information is accessed by the hardware. - - AutoNeg ------- (Supported only on adapters with copper connections) @@ -106,7 +55,6 @@ Duplex parameters must not be specified. NOTE: Refer to the Speed and Duplex section of this readme for more information on the AutoNeg parameter. - Duplex ------ (Supported only on adapters with copper connections) @@ -119,7 +67,6 @@ set to auto-negotiate, the board auto-detects the correct duplex. If the link partner is forced (either full or half), Duplex defaults to half- duplex. - FlowControl ----------- Valid Range: 0-3 (0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx) @@ -128,16 +75,16 @@ Default Value: Reads flow control settings from the EEPROM This parameter controls the automatic generation(Tx) and response(Rx) to Ethernet PAUSE frames. - InterruptThrottleRate --------------------- (not supported on Intel(R) 82542, 82543 or 82544-based adapters) -Valid Range: 0,1,3,100-100000 (0=off, 1=dynamic, 3=dynamic conservative) +Valid Range: 0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative, + 4=simplified balancing) Default Value: 3 The driver can limit the amount of interrupts per second that the adapter -will generate for incoming packets. It does this by writing a value to the -adapter that is based on the maximum amount of interrupts that the adapter +will generate for incoming packets. It does this by writing a value to the +adapter that is based on the maximum amount of interrupts that the adapter will generate per second. Setting InterruptThrottleRate to a value greater or equal to 100 @@ -146,37 +93,43 @@ per second, even if more packets have come in. This reduces interrupt load on the system and can lower CPU utilization under heavy load, but will increase latency as packets are not processed as quickly. -The default behaviour of the driver previously assumed a static -InterruptThrottleRate value of 8000, providing a good fallback value for -all traffic types,but lacking in small packet performance and latency. -The hardware can handle many more small packets per second however, and +The default behaviour of the driver previously assumed a static +InterruptThrottleRate value of 8000, providing a good fallback value for +all traffic types,but lacking in small packet performance and latency. +The hardware can handle many more small packets per second however, and for this reason an adaptive interrupt moderation algorithm was implemented. Since 7.3.x, the driver has two adaptive modes (setting 1 or 3) in which -it dynamically adjusts the InterruptThrottleRate value based on the traffic +it dynamically adjusts the InterruptThrottleRate value based on the traffic that it receives. After determining the type of incoming traffic in the last -timeframe, it will adjust the InterruptThrottleRate to an appropriate value +timeframe, it will adjust the InterruptThrottleRate to an appropriate value for that traffic. The algorithm classifies the incoming traffic every interval into -classes. Once the class is determined, the InterruptThrottleRate value is -adjusted to suit that traffic type the best. There are three classes defined: +classes. Once the class is determined, the InterruptThrottleRate value is +adjusted to suit that traffic type the best. There are three classes defined: "Bulk traffic", for large amounts of packets of normal size; "Low latency", for small amounts of traffic and/or a significant percentage of small -packets; and "Lowest latency", for almost completely small packets or +packets; and "Lowest latency", for almost completely small packets or minimal traffic. -In dynamic conservative mode, the InterruptThrottleRate value is set to 4000 -for traffic that falls in class "Bulk traffic". If traffic falls in the "Low -latency" or "Lowest latency" class, the InterruptThrottleRate is increased +In dynamic conservative mode, the InterruptThrottleRate value is set to 4000 +for traffic that falls in class "Bulk traffic". If traffic falls in the "Low +latency" or "Lowest latency" class, the InterruptThrottleRate is increased stepwise to 20000. This default mode is suitable for most applications. For situations where low latency is vital such as cluster or grid computing, the algorithm can reduce latency even more when InterruptThrottleRate is set to mode 1. In this mode, which operates -the same as mode 3, the InterruptThrottleRate will be increased stepwise to +the same as mode 3, the InterruptThrottleRate will be increased stepwise to 70000 for traffic in class "Lowest latency". +In simplified mode the interrupt rate is based on the ratio of Tx and +Rx traffic. If the bytes per second rate is approximately equal, the +interrupt rate will drop as low as 2000 interrupts per second. If the +traffic is mostly transmit or mostly receive, the interrupt rate could +be as high as 8000. + Setting InterruptThrottleRate to 0 turns off any interrupt moderation and may improve small packet latency, but is generally not suitable for bulk throughput traffic. @@ -212,8 +165,6 @@ NOTE: When e1000 is loaded with default settings and multiple adapters be platform-specific. If CPU utilization is not a concern, use RX_POLLING (NAPI) and default driver settings. - - RxDescriptors ------------- Valid Range: 80-256 for 82542 and 82543-based adapters @@ -225,15 +176,14 @@ by the driver. Increasing this value allows the driver to buffer more incoming packets, at the expense of increased system memory utilization. Each descriptor is 16 bytes. A receive buffer is also allocated for each -descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending +descriptor and can be either 2048, 4096, 8192, or 16384 bytes, depending on the MTU setting. The maximum MTU size is 16110. -NOTE: MTU designates the frame size. It only needs to be set for Jumbo - Frames. Depending on the available system resources, the request - for a higher number of receive descriptors may be denied. In this +NOTE: MTU designates the frame size. It only needs to be set for Jumbo + Frames. Depending on the available system resources, the request + for a higher number of receive descriptors may be denied. In this case, use a lower number. - RxIntDelay ---------- Valid Range: 0-65535 (0=off) @@ -254,7 +204,6 @@ CAUTION: When setting RxIntDelay to a value other than 0, adapters may restoring the network connection. To eliminate the potential for the hang ensure that RxIntDelay is set to 0. - RxAbsIntDelay ------------- (This parameter is supported only on 82540, 82545 and later adapters.) @@ -268,7 +217,6 @@ packet is received within the set amount of time. Proper tuning, along with RxIntDelay, may improve traffic throughput in specific network conditions. - Speed ----- (This parameter is supported only on adapters with copper connections.) @@ -280,7 +228,6 @@ Speed forces the line speed to the specified value in megabits per second partner is set to auto-negotiate, the board will auto-detect the correct speed. Duplex should also be set when Speed is set to either 10 or 100. - TxDescriptors ------------- Valid Range: 80-256 for 82542 and 82543-based adapters @@ -295,6 +242,36 @@ NOTE: Depending on the available system resources, the request for a higher number of transmit descriptors may be denied. In this case, use a lower number. +TxDescriptorStep +---------------- +Valid Range: 1 (use every Tx Descriptor) + 4 (use every 4th Tx Descriptor) + +Default Value: 1 (use every Tx Descriptor) + +On certain non-Intel architectures, it has been observed that intense TX +traffic bursts of short packets may result in an improper descriptor +writeback. If this occurs, the driver will report a "TX Timeout" and reset +the adapter, after which the transmit flow will restart, though data may +have stalled for as much as 10 seconds before it resumes. + +The improper writeback does not occur on the first descriptor in a system +memory cache-line, which is typically 32 bytes, or 4 descriptors long. + +Setting TxDescriptorStep to a value of 4 will ensure that all TX descriptors +are aligned to the start of a system memory cache line, and so this problem +will not occur. + +NOTES: Setting TxDescriptorStep to 4 effectively reduces the number of + TxDescriptors available for transmits to 1/4 of the normal allocation. + This has a possible negative performance impact, which may be + compensated for by allocating more descriptors using the TxDescriptors + module parameter. + + There are other conditions which may result in "TX Timeout", which will + not be resolved by the use of the TxDescriptorStep parameter. As the + issue addressed by this parameter has never been observed on Intel + Architecture platforms, it should not be used on Intel platforms. TxIntDelay ---------- @@ -307,7 +284,6 @@ efficiency if properly tuned for specific network traffic. If the system is reporting dropped transmits, this value may be set too high causing the driver to run out of available transmit descriptors. - TxAbsIntDelay ------------- (This parameter is supported only on 82540, 82545 and later adapters.) @@ -330,6 +306,35 @@ Default Value: 1 A value of '1' indicates that the driver should enable IP checksum offload for received packets (both UDP and TCP) to the adapter hardware. +Copybreak +--------- +Valid Range: 0-xxxxxxx (0=off) +Default Value: 256 +Usage: insmod e1000.ko copybreak=128 + +Driver copies all packets below or equaling this size to a fresh Rx +buffer before handing it up the stack. + +This parameter is different than other parameters, in that it is a +single (not 1,1,1 etc.) parameter applied to all driver instances and +it is also available during runtime at +/sys/module/e1000/parameters/copybreak + +SmartPowerDownEnable +-------------------- +Valid Range: 0-1 +Default Value: 0 (disabled) + +Allows PHY to turn off in lower power states. The user can turn off +this parameter in supported chipsets. + +KumeranLockLoss +--------------- +Valid Range: 0-1 +Default Value: 1 (enabled) + +This workaround skips resetting the PHY at shutdown for the initial +silicon releases of ICH8 systems. Speed and Duplex Configuration ============================== @@ -385,40 +390,9 @@ If the link partner is forced to a specific speed and duplex, then this parameter should not be used. Instead, use the Speed and Duplex parameters previously mentioned to force the adapter to the same speed and duplex. - Additional Configurations ========================= - Configuring the Driver on Different Distributions - ------------------------------------------------- - Configuring a network driver to load properly when the system is started - is distribution dependent. Typically, the configuration process involves - adding an alias line to /etc/modules.conf or /etc/modprobe.conf as well - as editing other system startup scripts and/or configuration files. Many - popular Linux distributions ship with tools to make these changes for you. - To learn the proper way to configure a network device for your system, - refer to your distribution documentation. If during this process you are - asked for the driver or module name, the name for the Linux Base Driver - for the Intel(R) PRO/1000 Family of Adapters is e1000. - - As an example, if you install the e1000 driver for two PRO/1000 adapters - (eth0 and eth1) and set the speed and duplex to 10full and 100half, add - the following to modules.conf or or modprobe.conf: - - alias eth0 e1000 - alias eth1 e1000 - options e1000 Speed=10,100 Duplex=2,1 - - Viewing Link Messages - --------------------- - Link messages will not be displayed to the console if the distribution is - restricting system messages. In order to see network driver link messages - on your console, set dmesg to eight by entering the following: - - dmesg -n 8 - - NOTE: This setting is not saved across reboots. - Jumbo Frames ------------ Jumbo Frames support is enabled by changing the MTU to a value larger than @@ -437,9 +411,11 @@ Additional Configurations setting in a different location. Notes: - - - To enable Jumbo Frames, increase the MTU size on the interface beyond - 1500. + Degradation in throughput performance may be observed in some Jumbo frames + environments. If this is observed, increasing the application's socket buffer + size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help. + See the specific application manual and /usr/src/linux*/Documentation/ + networking/ip-sysctl.txt for more details. - The maximum MTU setting for Jumbo Frames is 16110. This value coincides with the maximum Jumbo Frames size of 16128. @@ -447,40 +423,11 @@ Additional Configurations - Using Jumbo Frames at 10 or 100 Mbps may result in poor performance or loss of link. - - Some Intel gigabit adapters that support Jumbo Frames have a frame size - limit of 9238 bytes, with a corresponding MTU size limit of 9216 bytes. - The adapters with this limitation are based on the Intel(R) 82571EB, - 82572EI, 82573L and 80003ES2LAN controller. These correspond to the - following product names: - Intel(R) PRO/1000 PT Server Adapter - Intel(R) PRO/1000 PT Desktop Adapter - Intel(R) PRO/1000 PT Network Connection - Intel(R) PRO/1000 PT Dual Port Server Adapter - Intel(R) PRO/1000 PT Dual Port Network Connection - Intel(R) PRO/1000 PF Server Adapter - Intel(R) PRO/1000 PF Network Connection - Intel(R) PRO/1000 PF Dual Port Server Adapter - Intel(R) PRO/1000 PB Server Connection - Intel(R) PRO/1000 PL Network Connection - Intel(R) PRO/1000 EB Network Connection with I/O Acceleration - Intel(R) PRO/1000 EB Backplane Connection with I/O Acceleration - Intel(R) PRO/1000 PT Quad Port Server Adapter - - Adapters based on the Intel(R) 82542 and 82573V/E controller do not support Jumbo Frames. These correspond to the following product names: Intel(R) PRO/1000 Gigabit Server Adapter Intel(R) PRO/1000 PM Network Connection - - The following adapters do not support Jumbo Frames: - Intel(R) 82562V 10/100 Network Connection - Intel(R) 82566DM Gigabit Network Connection - Intel(R) 82566DC Gigabit Network Connection - Intel(R) 82566MM Gigabit Network Connection - Intel(R) 82566MC Gigabit Network Connection - Intel(R) 82562GT 10/100 Network Connection - Intel(R) 82562G 10/100 Network Connection - - Ethtool ------- The driver utilizes the ethtool interface for driver configuration and @@ -490,142 +437,14 @@ Additional Configurations The latest release of ethtool can be found from http://sourceforge.net/projects/gkernel. - NOTE: Ethtool 1.6 only supports a limited set of ethtool options. Support - for a more complete ethtool feature set can be enabled by upgrading - ethtool to ethtool-1.8.1. - Enabling Wake on LAN* (WoL) --------------------------- - WoL is configured through the Ethtool* utility. Ethtool is included with - all versions of Red Hat after Red Hat 7.2. For other Linux distributions, - download and install Ethtool from the following website: - http://sourceforge.net/projects/gkernel. - - For instructions on enabling WoL with Ethtool, refer to the website listed - above. + WoL is configured through the Ethtool* utility. WoL will be enabled on the system during the next shut down or reboot. For this driver version, in order to enable WoL, the e1000 driver must be loaded when shutting down or rebooting the system. - Wake On LAN is only supported on port A for the following devices: - Intel(R) PRO/1000 PT Dual Port Network Connection - Intel(R) PRO/1000 PT Dual Port Server Connection - Intel(R) PRO/1000 PT Dual Port Server Adapter - Intel(R) PRO/1000 PF Dual Port Server Adapter - Intel(R) PRO/1000 PT Quad Port Server Adapter - - NAPI - ---- - NAPI (Rx polling mode) is enabled in the e1000 driver. - - See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI. - - -Known Issues -============ - -Dropped Receive Packets on Half-duplex 10/100 Networks ------------------------------------------------------- -If you have an Intel PCI Express adapter running at 10mbps or 100mbps, half- -duplex, you may observe occasional dropped receive packets. There are no -workarounds for this problem in this network configuration. The network must -be updated to operate in full-duplex, and/or 1000mbps only. - -Jumbo Frames System Requirement -------------------------------- -Memory allocation failures have been observed on Linux systems with 64 MB -of RAM or less that are running Jumbo Frames. If you are using Jumbo -Frames, your system may require more than the advertised minimum -requirement of 64 MB of system memory. - -Performance Degradation with Jumbo Frames ------------------------------------------ -Degradation in throughput performance may be observed in some Jumbo frames -environments. If this is observed, increasing the application's socket -buffer size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values -may help. See the specific application manual and -/usr/src/linux*/Documentation/ -networking/ip-sysctl.txt for more details. - -Jumbo Frames on Foundry BigIron 8000 switch -------------------------------------------- -There is a known issue using Jumbo frames when connected to a Foundry -BigIron 8000 switch. This is a 3rd party limitation. If you experience -loss of packets, lower the MTU size. - -Allocating Rx Buffers when Using Jumbo Frames ---------------------------------------------- -Allocating Rx buffers when using Jumbo Frames on 2.6.x kernels may fail if -the available memory is heavily fragmented. This issue may be seen with PCI-X -adapters or with packet split disabled. This can be reduced or eliminated -by changing the amount of available memory for receive buffer allocation, by -increasing /proc/sys/vm/min_free_kbytes. - -Multiple Interfaces on Same Ethernet Broadcast Network ------------------------------------------------------- -Due to the default ARP behavior on Linux, it is not possible to have -one system on two IP networks in the same Ethernet broadcast domain -(non-partitioned switch) behave as expected. All Ethernet interfaces -will respond to IP traffic for any IP address assigned to the system. -This results in unbalanced receive traffic. - -If you have multiple interfaces in a server, either turn on ARP -filtering by entering: - - echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter -(this only works if your kernel's version is higher than 2.4.5), - -NOTE: This setting is not saved across reboots. The configuration -change can be made permanent by adding the line: - net.ipv4.conf.all.arp_filter = 1 -to the file /etc/sysctl.conf - - or, - -install the interfaces in separate broadcast domains (either in -different switches or in a switch partitioned to VLANs). - -82541/82547 can't link or are slow to link with some link partners ------------------------------------------------------------------ -There is a known compatibility issue with 82541/82547 and some -low-end switches where the link will not be established, or will -be slow to establish. In particular, these switches are known to -be incompatible with 82541/82547: - - Planex FXG-08TE - I-O Data ETG-SH8 - -To workaround this issue, the driver can be compiled with an override -of the PHY's master/slave setting. Forcing master or forcing slave -mode will improve time-to-link. - - # make CFLAGS_EXTRA=-DE1000_MASTER_SLAVE=<n> - -Where <n> is: - - 0 = Hardware default - 1 = Master mode - 2 = Slave mode - 3 = Auto master/slave - -Disable rx flow control with ethtool ------------------------------------- -In order to disable receive flow control using ethtool, you must turn -off auto-negotiation on the same command line. - -For example: - - ethtool -A eth? autoneg off rx off - -Unplugging network cable while ethtool -p is running ----------------------------------------------------- -In kernel versions 2.5.50 and later (including 2.6 kernel), unplugging -the network cable while ethtool -p is running will cause the system to -become unresponsive to keyboard commands, except for control-alt-delete. -Restarting the system appears to be the only remedy. - - Support ======= diff --git a/Documentation/networking/e1000e.txt b/Documentation/networking/e1000e.txt new file mode 100644 index 000000000000..6aa048badf32 --- /dev/null +++ b/Documentation/networking/e1000e.txt @@ -0,0 +1,302 @@ +Linux* Driver for Intel(R) Network Connection +=============================================================== + +Intel Gigabit Linux driver. +Copyright(c) 1999 - 2010 Intel Corporation. + +Contents +======== + +- Identifying Your Adapter +- Command Line Parameters +- Additional Configurations +- Support + +Identifying Your Adapter +======================== + +The e1000e driver supports all PCI Express Intel(R) Gigabit Network +Connections, except those that are 82575, 82576 and 82580-based*. + +* NOTE: The Intel(R) PRO/1000 P Dual Port Server Adapter is supported by + the e1000 driver, not the e1000e driver due to the 82546 part being used + behind a PCI Express bridge. + +For more information on how to identify your adapter, go to the Adapter & +Driver ID Guide at: + + http://support.intel.com/support/go/network/adapter/idguide.htm + +For the latest Intel network drivers for Linux, refer to the following +website. In the search field, enter your adapter name or type, or use the +networking link on the left to search for your adapter: + + http://support.intel.com/support/go/network/adapter/home.htm + +Command Line Parameters +======================= + +The default value for each parameter is generally the recommended setting, +unless otherwise noted. + +NOTES: For more information about the InterruptThrottleRate, + RxIntDelay, TxIntDelay, RxAbsIntDelay, and TxAbsIntDelay + parameters, see the application note at: + http://www.intel.com/design/network/applnots/ap450.htm + +InterruptThrottleRate +--------------------- +Valid Range: 0,1,3,4,100-100000 (0=off, 1=dynamic, 3=dynamic conservative, + 4=simplified balancing) +Default Value: 3 + +The driver can limit the amount of interrupts per second that the adapter +will generate for incoming packets. It does this by writing a value to the +adapter that is based on the maximum amount of interrupts that the adapter +will generate per second. + +Setting InterruptThrottleRate to a value greater or equal to 100 +will program the adapter to send out a maximum of that many interrupts +per second, even if more packets have come in. This reduces interrupt +load on the system and can lower CPU utilization under heavy load, +but will increase latency as packets are not processed as quickly. + +The driver has two adaptive modes (setting 1 or 3) in which +it dynamically adjusts the InterruptThrottleRate value based on the traffic +that it receives. After determining the type of incoming traffic in the last +timeframe, it will adjust the InterruptThrottleRate to an appropriate value +for that traffic. + +The algorithm classifies the incoming traffic every interval into +classes. Once the class is determined, the InterruptThrottleRate value is +adjusted to suit that traffic type the best. There are three classes defined: +"Bulk traffic", for large amounts of packets of normal size; "Low latency", +for small amounts of traffic and/or a significant percentage of small +packets; and "Lowest latency", for almost completely small packets or +minimal traffic. + +In dynamic conservative mode, the InterruptThrottleRate value is set to 4000 +for traffic that falls in class "Bulk traffic". If traffic falls in the "Low +latency" or "Lowest latency" class, the InterruptThrottleRate is increased +stepwise to 20000. This default mode is suitable for most applications. + +For situations where low latency is vital such as cluster or +grid computing, the algorithm can reduce latency even more when +InterruptThrottleRate is set to mode 1. In this mode, which operates +the same as mode 3, the InterruptThrottleRate will be increased stepwise to +70000 for traffic in class "Lowest latency". + +In simplified mode the interrupt rate is based on the ratio of Tx and +Rx traffic. If the bytes per second rate is approximately equal the +interrupt rate will drop as low as 2000 interrupts per second. If the +traffic is mostly transmit or mostly receive, the interrupt rate could +be as high as 8000. + +Setting InterruptThrottleRate to 0 turns off any interrupt moderation +and may improve small packet latency, but is generally not suitable +for bulk throughput traffic. + +NOTE: InterruptThrottleRate takes precedence over the TxAbsIntDelay and + RxAbsIntDelay parameters. In other words, minimizing the receive + and/or transmit absolute delays does not force the controller to + generate more interrupts than what the Interrupt Throttle Rate + allows. + +NOTE: When e1000e is loaded with default settings and multiple adapters + are in use simultaneously, the CPU utilization may increase non- + linearly. In order to limit the CPU utilization without impacting + the overall throughput, we recommend that you load the driver as + follows: + + modprobe e1000e InterruptThrottleRate=3000,3000,3000 + + This sets the InterruptThrottleRate to 3000 interrupts/sec for + the first, second, and third instances of the driver. The range + of 2000 to 3000 interrupts per second works on a majority of + systems and is a good starting point, but the optimal value will + be platform-specific. If CPU utilization is not a concern, use + RX_POLLING (NAPI) and default driver settings. + +RxIntDelay +---------- +Valid Range: 0-65535 (0=off) +Default Value: 0 + +This value delays the generation of receive interrupts in units of 1.024 +microseconds. Receive interrupt reduction can improve CPU efficiency if +properly tuned for specific network traffic. Increasing this value adds +extra latency to frame reception and can end up decreasing the throughput +of TCP traffic. If the system is reporting dropped receives, this value +may be set too high, causing the driver to run out of available receive +descriptors. + +CAUTION: When setting RxIntDelay to a value other than 0, adapters may + hang (stop transmitting) under certain network conditions. If + this occurs a NETDEV WATCHDOG message is logged in the system + event log. In addition, the controller is automatically reset, + restoring the network connection. To eliminate the potential + for the hang ensure that RxIntDelay is set to 0. + +RxAbsIntDelay +------------- +Valid Range: 0-65535 (0=off) +Default Value: 8 + +This value, in units of 1.024 microseconds, limits the delay in which a +receive interrupt is generated. Useful only if RxIntDelay is non-zero, +this value ensures that an interrupt is generated after the initial +packet is received within the set amount of time. Proper tuning, +along with RxIntDelay, may improve traffic throughput in specific network +conditions. + +TxIntDelay +---------- +Valid Range: 0-65535 (0=off) +Default Value: 8 + +This value delays the generation of transmit interrupts in units of +1.024 microseconds. Transmit interrupt reduction can improve CPU +efficiency if properly tuned for specific network traffic. If the +system is reporting dropped transmits, this value may be set too high +causing the driver to run out of available transmit descriptors. + +TxAbsIntDelay +------------- +Valid Range: 0-65535 (0=off) +Default Value: 32 + +This value, in units of 1.024 microseconds, limits the delay in which a +transmit interrupt is generated. Useful only if TxIntDelay is non-zero, +this value ensures that an interrupt is generated after the initial +packet is sent on the wire within the set amount of time. Proper tuning, +along with TxIntDelay, may improve traffic throughput in specific +network conditions. + +Copybreak +--------- +Valid Range: 0-xxxxxxx (0=off) +Default Value: 256 + +Driver copies all packets below or equaling this size to a fresh Rx +buffer before handing it up the stack. + +This parameter is different than other parameters, in that it is a +single (not 1,1,1 etc.) parameter applied to all driver instances and +it is also available during runtime at +/sys/module/e1000e/parameters/copybreak + +SmartPowerDownEnable +-------------------- +Valid Range: 0-1 +Default Value: 0 (disabled) + +Allows PHY to turn off in lower power states. The user can set this parameter +in supported chipsets. + +KumeranLockLoss +--------------- +Valid Range: 0-1 +Default Value: 1 (enabled) + +This workaround skips resetting the PHY at shutdown for the initial +silicon releases of ICH8 systems. + +IntMode +------- +Valid Range: 0-2 (0=legacy, 1=MSI, 2=MSI-X) +Default Value: 2 + +Allows changing the interrupt mode at module load time, without requiring a +recompile. If the driver load fails to enable a specific interrupt mode, the +driver will try other interrupt modes, from least to most compatible. The +interrupt order is MSI-X, MSI, Legacy. If specifying MSI (IntMode=1) +interrupts, only MSI and Legacy will be attempted. + +CrcStripping +------------ +Valid Range: 0-1 +Default Value: 1 (enabled) + +Strip the CRC from received packets before sending up the network stack. If +you have a machine with a BMC enabled but cannot receive IPMI traffic after +loading or enabling the driver, try disabling this feature. + +WriteProtectNVM +--------------- +Valid Range: 0-1 +Default Value: 1 (enabled) + +Set the hardware to ignore all write/erase cycles to the GbE region in the +ICHx NVM (non-volatile memory). This feature can be disabled by the +WriteProtectNVM module parameter (enabled by default) only after a hardware +reset, but the machine must be power cycled before trying to enable writes. + +Note: the kernel boot option iomem=relaxed may need to be set if the kernel +config option CONFIG_STRICT_DEVMEM=y, if the root user wants to write the +NVM from user space via ethtool. + +Additional Configurations +========================= + + Jumbo Frames + ------------ + Jumbo Frames support is enabled by changing the MTU to a value larger than + the default of 1500. Use the ifconfig command to increase the MTU size. + For example: + + ifconfig eth<x> mtu 9000 up + + This setting is not saved across reboots. + + Notes: + + - The maximum MTU setting for Jumbo Frames is 9216. This value coincides + with the maximum Jumbo Frames size of 9234 bytes. + + - Using Jumbo Frames at 10 or 100 Mbps is not supported and may result in + poor performance or loss of link. + + - Some adapters limit Jumbo Frames sized packets to a maximum of + 4096 bytes and some adapters do not support Jumbo Frames. + + + Ethtool + ------- + The driver utilizes the ethtool interface for driver configuration and + diagnostics, as well as displaying statistical information. We + strongly recommend downloading the latest version of Ethtool at: + + http://sourceforge.net/projects/gkernel. + + Speed and Duplex + ---------------- + Speed and Duplex are configured through the Ethtool* utility. For + instructions, refer to the Ethtool man page. + + Enabling Wake on LAN* (WoL) + --------------------------- + WoL is configured through the Ethtool* utility. For instructions on + enabling WoL with Ethtool, refer to the Ethtool man page. + + WoL will be enabled on the system during the next shut down or reboot. + For this driver version, in order to enable WoL, the e1000e driver must be + loaded when shutting down or rebooting the system. + + In most cases Wake On LAN is only supported on port A for multiple port + adapters. To verify if a port supports Wake on LAN run ethtool eth<X>. + + +Support +======= + +For general information, go to the Intel support website at: + + www.intel.com/support/ + +or the Intel Wired Networking project hosted by Sourceforge at: + + http://sourceforge.net/projects/e1000 + +If an issue is identified with the released source code on the supported +kernel with a supported adapter, email the specific information related +to the issue to e1000-devel@lists.sf.net diff --git a/Documentation/networking/ixgbevf.txt b/Documentation/networking/ixgbevf.txt index 19015de6725f..21dd5d15b6b4 100755..100644 --- a/Documentation/networking/ixgbevf.txt +++ b/Documentation/networking/ixgbevf.txt @@ -1,19 +1,16 @@ Linux* Base Driver for Intel(R) Network Connection ================================================== -November 24, 2009 +Intel Gigabit Linux driver. +Copyright(c) 1999 - 2010 Intel Corporation. Contents ======== -- In This Release - Identifying Your Adapter - Known Issues/Troubleshooting - Support -In This Release -=============== - This file describes the ixgbevf Linux* Base Driver for Intel Network Connection. @@ -33,7 +30,7 @@ Identifying Your Adapter For more information on how to identify your adapter, go to the Adapter & Driver ID Guide at: - http://support.intel.com/support/network/sb/CS-008441.htm + http://support.intel.com/support/go/network/adapter/idguide.htm Known Issues/Troubleshooting ============================ @@ -57,34 +54,3 @@ or the Intel Wired Networking project hosted by Sourceforge at: If an issue is identified with the released source code on the supported kernel with a supported adapter, email the specific information related to the issue to e1000-devel@lists.sf.net - -License -======= - -Intel 10 Gigabit Linux driver. -Copyright(c) 1999 - 2009 Intel Corporation. - -This program is free software; you can redistribute it and/or modify it -under the terms and conditions of the GNU General Public License, -version 2, as published by the Free Software Foundation. - -This program is distributed in the hope it will be useful, but WITHOUT -ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -more details. - -You should have received a copy of the GNU General Public License along with -this program; if not, write to the Free Software Foundation, Inc., -51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - -The full GNU General Public License is included in this distribution in -the file called "COPYING". - -Trademarks -========== - -Intel, Itanium, and Pentium are trademarks or registered trademarks of -Intel Corporation or its subsidiaries in the United States and other -countries. - -* Other names and brands may be claimed as the property of others. diff --git a/Documentation/vm/page-types.c b/Documentation/vm/page-types.c index ccd951fa94ee..cc96ee2666f2 100644 --- a/Documentation/vm/page-types.c +++ b/Documentation/vm/page-types.c @@ -478,7 +478,7 @@ static void prepare_hwpoison_fd(void) } if (opt_unpoison && !hwpoison_forget_fd) { - sprintf(buf, "%s/renew-pfn", hwpoison_debug_fs); + sprintf(buf, "%s/unpoison-pfn", hwpoison_debug_fs); hwpoison_forget_fd = checked_open(buf, O_WRONLY); } } diff --git a/MAINTAINERS b/MAINTAINERS index f46d8e66333f..7679bf32f7bb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -969,6 +969,16 @@ L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-s5p*/ +ARM/SAMSUNG S5P SERIES FIMC SUPPORT +M: Kyungmin Park <kyungmin.park@samsung.com> +M: Sylwester Nawrocki <s.nawrocki@samsung.com> +L: linux-arm-kernel@lists.infradead.org +L: linux-media@vger.kernel.org +S: Maintained +F: arch/arm/plat-s5p/dev-fimc* +F: arch/arm/plat-samsung/include/plat/*fimc* +F: drivers/media/video/s5p-fimc/ + ARM/SHMOBILE ARM ARCHITECTURE M: Paul Mundt <lethal@linux-sh.org> M: Magnus Damm <magnus.damm@gmail.com> @@ -2535,7 +2545,7 @@ S: Supported F: drivers/scsi/gdt* GENERIC GPIO I2C DRIVER -M: Haavard Skinnemoen <hskinnemoen@atmel.com> +M: Haavard Skinnemoen <hskinnemoen@gmail.com> S: Supported F: drivers/i2c/busses/i2c-gpio.c F: include/linux/i2c-gpio.h @@ -3063,16 +3073,27 @@ L: netdev@vger.kernel.org S: Maintained F: drivers/net/ixp2000/ -INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe) +INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe/ixgbevf) M: Jeff Kirsher <jeffrey.t.kirsher@intel.com> M: Jesse Brandeburg <jesse.brandeburg@intel.com> M: Bruce Allan <bruce.w.allan@intel.com> -M: Alex Duyck <alexander.h.duyck@intel.com> +M: Carolyn Wyborny <carolyn.wyborny@intel.com> +M: Don Skidmore <donald.c.skidmore@intel.com> +M: Greg Rose <gregory.v.rose@intel.com> M: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com> +M: Alex Duyck <alexander.h.duyck@intel.com> M: John Ronciak <john.ronciak@intel.com> L: e1000-devel@lists.sourceforge.net W: http://e1000.sourceforge.net/ S: Supported +F: Documentation/networking/e100.txt +F: Documentation/networking/e1000.txt +F: Documentation/networking/e1000e.txt +F: Documentation/networking/igb.txt +F: Documentation/networking/igbvf.txt +F: Documentation/networking/ixgb.txt +F: Documentation/networking/ixgbe.txt +F: Documentation/networking/ixgbevf.txt F: drivers/net/e100.c F: drivers/net/e1000/ F: drivers/net/e1000e/ @@ -3080,6 +3101,7 @@ F: drivers/net/igb/ F: drivers/net/igbvf/ F: drivers/net/ixgb/ F: drivers/net/ixgbe/ +F: drivers/net/ixgbevf/ INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT L: linux-wireless@vger.kernel.org @@ -5008,6 +5030,12 @@ F: drivers/media/common/saa7146* F: drivers/media/video/*7146* F: include/media/*7146* +SAMSUNG AUDIO (ASoC) DRIVERS +M: Jassi Brar <jassi.brar@samsung.com> +L: alsa-devel@alsa-project.org (moderated for non-subscribers) +S: Supported +F: sound/soc/s3c24xx + TLG2300 VIDEO4LINUX-2 DRIVER M: Huang Shijie <shijie8@gmail.com> M: Kang Yong <kangyong@telegent.com> @@ -6450,8 +6478,10 @@ F: include/linux/wm97xx.h WOLFSON MICROELECTRONICS DRIVERS M: Mark Brown <broonie@opensource.wolfsonmicro.com> M: Ian Lartey <ian@opensource.wolfsonmicro.com> +M: Dimitris Papastamos <dp@opensource.wolfsonmicro.com> +T: git git://opensource.wolfsonmicro.com/linux-2.6-asoc T: git git://opensource.wolfsonmicro.com/linux-2.6-audioplus -W: http://opensource.wolfsonmicro.com/node/8 +W: http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices S: Supported F: Documentation/hwmon/wm83?? F: drivers/leds/leds-wm83*.c diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 88c97bc7a6f5..9c26ba7244fb 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1101,6 +1101,20 @@ config ARM_ERRATA_720789 invalidated are not, resulting in an incoherency in the system page tables. The workaround changes the TLB flushing routines to invalidate entries regardless of the ASID. + +config ARM_ERRATA_743622 + bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption" + depends on CPU_V7 + help + This option enables the workaround for the 743622 Cortex-A9 + (r2p0..r2p2) erratum. Under very rare conditions, a faulty + optimisation in the Cortex-A9 Store Buffer may lead to data + corruption. This workaround sets a specific bit in the diagnostic + register of the Cortex-A9 which disables the Store Buffer + optimisation, preventing the defect from occurring. This has no + visible impact on the overall performance or power consumption of the + processor. + endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c index 8bccbfa693ff..2c1f0050c9c4 100644 --- a/arch/arm/kernel/kprobes-decode.c +++ b/arch/arm/kernel/kprobes-decode.c @@ -1162,11 +1162,12 @@ space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi) { /* * MSR : cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx - * Undef : cccc 0011 0x00 xxxx xxxx xxxx xxxx xxxx + * Undef : cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx * ALU op with S bit and Rd == 15 : * cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx */ - if ((insn & 0x0f900000) == 0x03200000 || /* MSR & Undef */ + if ((insn & 0x0fb00000) == 0x03200000 || /* MSR */ + (insn & 0x0ff00000) == 0x03400000 || /* Undef */ (insn & 0x0e10f000) == 0x0210f000) /* ALU s-bit, R15 */ return INSN_REJECTED; @@ -1177,7 +1178,7 @@ space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi) * *S (bit 20) updates condition codes * ADC/SBC/RSC reads the C flag */ - insn &= 0xfff00fff; /* Rn = r0, Rd = r0 */ + insn &= 0xffff0fff; /* Rd = r0 */ asi->insn[0] = insn; asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */ emulate_alu_imm_rwflags : emulate_alu_imm_rflags; diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h index c80e090b3670..ee8db152592e 100644 --- a/arch/arm/mach-at91/include/mach/system.h +++ b/arch/arm/mach-at91/include/mach/system.h @@ -28,17 +28,16 @@ static inline void arch_idle(void) { -#ifndef CONFIG_DEBUG_KERNEL /* * Disable the processor clock. The processor will be automatically * re-enabled by an interrupt or by a reset. */ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK); -#else +#ifndef CONFIG_CPU_ARM920T /* * Set the processor (CP15) into 'Wait for Interrupt' mode. - * Unlike disabling the processor clock via the PMC (above) - * this allows the processor to be woken via JTAG. + * Post-RM9200 processors need this in conjunction with the above + * to save power when idle. */ cpu_do_idle(); #endif diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c index 8904ca4e2e24..a696d354b1f8 100644 --- a/arch/arm/mach-ep93xx/dma-m2p.c +++ b/arch/arm/mach-ep93xx/dma-m2p.c @@ -276,7 +276,7 @@ static void channel_disable(struct m2p_channel *ch) v &= ~(M2P_CONTROL_STALL_IRQ_EN | M2P_CONTROL_NFB_IRQ_EN); m2p_set_control(ch, v); - while (m2p_channel_state(ch) == STATE_ON) + while (m2p_channel_state(ch) >= STATE_ON) cpu_relax(); m2p_set_control(ch, 0x0); diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index c5c0369bb481..2f7e2728970d 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -122,6 +122,7 @@ config MACH_CPUIMX27 select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_NAND + select MXC_ULPI if USB_ULPI help Include support for Eukrea CPUIMX27 platform. This includes specific configurations for the module and its peripherals. diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 339150ab0ea5..6830afd1d2ba 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -259,7 +259,7 @@ static void __init eukrea_cpuimx27_init(void) i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices, ARRAY_SIZE(eukrea_cpuimx27_i2c_devices)); - imx27_add_i2c_imx1(&cpuimx27_i2c1_data); + imx27_add_i2c_imx0(&cpuimx27_i2c1_data); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); diff --git a/arch/arm/mach-s5p6440/cpu.c b/arch/arm/mach-s5p6440/cpu.c index 526f33adb31d..ec592e866054 100644 --- a/arch/arm/mach-s5p6440/cpu.c +++ b/arch/arm/mach-s5p6440/cpu.c @@ -19,6 +19,7 @@ #include <linux/sysdev.h> #include <linux/serial_core.h> #include <linux/platform_device.h> +#include <linux/sched.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c index a48fb553fd01..70ac681af72b 100644 --- a/arch/arm/mach-s5p6442/cpu.c +++ b/arch/arm/mach-s5p6442/cpu.c @@ -19,6 +19,7 @@ #include <linux/sysdev.h> #include <linux/serial_core.h> #include <linux/platform_device.h> +#include <linux/sched.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c index 251c92ac5b22..cd1afbce83e2 100644 --- a/arch/arm/mach-s5pc100/cpu.c +++ b/arch/arm/mach-s5pc100/cpu.c @@ -21,6 +21,7 @@ #include <linux/sysdev.h> #include <linux/serial_core.h> #include <linux/platform_device.h> +#include <linux/sched.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index cfecd70657cb..d562670e1b0b 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -173,11 +173,6 @@ static int s5pv210_clk_ip3_ctrl(struct clk *clk, int enable) return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable); } -static int s5pv210_clk_ip4_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP4, clk, enable); -} - static int s5pv210_clk_mask0_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLK_SRC_MASK0, clk, enable); diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index 77f456c91ad3..245b82b53df4 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -19,6 +19,7 @@ #include <linux/io.h> #include <linux/sysdev.h> #include <linux/platform_device.h> +#include <linux/sched.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index efb127022d42..71fb17349520 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -68,7 +68,7 @@ static void __init ct_ca9x4_init_irq(void) } #if 0 -static void ct_ca9x4_timer_init(void) +static void __init ct_ca9x4_timer_init(void) { writel(0, MMIO_P2V(CT_CA9X4_TIMER0) + TIMER_CTRL); writel(0, MMIO_P2V(CT_CA9X4_TIMER1) + TIMER_CTRL); @@ -222,7 +222,7 @@ static struct platform_device pmu_device = { .resource = pmu_resources, }; -static void ct_ca9x4_init(void) +static void __init ct_ca9x4_init(void) { int i; diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 817f0ad38a0b..7eaa232180a5 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -48,7 +48,7 @@ void __init v2m_map_io(struct map_desc *tile, size_t num) } -static void v2m_timer_init(void) +static void __init v2m_timer_init(void) { writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL); writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL); diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index ab506272b2d3..17e7b0b57e49 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -204,8 +204,12 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn, /* * Don't allow RAM to be mapped - this causes problems with ARMv6+ */ - if (WARN_ON(pfn_valid(pfn))) - return NULL; + if (pfn_valid(pfn)) { + printk(KERN_WARNING "BUG: Your driver calls ioremap() on system memory. This leads\n" + KERN_WARNING "to architecturally unpredictable behaviour on ARMv6+, and ioremap()\n" + KERN_WARNING "will fail in the next kernel release. Please fix your driver.\n"); + WARN_ON(1); + } type = get_mem_type(mtype); if (!type) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 6a3a2d0cd6db..e8ed9dc461fe 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -248,7 +248,7 @@ static struct mem_type mem_types[] = { }, [MT_MEMORY] = { .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | - L_PTE_USER | L_PTE_EXEC, + L_PTE_WRITE | L_PTE_EXEC, .prot_l1 = PMD_TYPE_TABLE, .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE, .domain = DOMAIN_KERNEL, @@ -259,7 +259,7 @@ static struct mem_type mem_types[] = { }, [MT_MEMORY_NONCACHED] = { .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY | - L_PTE_USER | L_PTE_EXEC | L_PTE_MT_BUFFERABLE, + L_PTE_WRITE | L_PTE_EXEC | L_PTE_MT_BUFFERABLE, .prot_l1 = PMD_TYPE_TABLE, .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE, .domain = DOMAIN_KERNEL, diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 7563ff0141bd..197f21bed5e9 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -253,6 +253,14 @@ __v7_setup: orreq r10, r10, #1 << 22 @ set bit #22 mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register #endif +#ifdef CONFIG_ARM_ERRATA_743622 + teq r6, #0x20 @ present in r2p0 + teqne r6, #0x21 @ present in r2p1 + teqne r6, #0x22 @ present in r2p2 + mrceq p15, 0, r10, c15, c0, 1 @ read diagnostic register + orreq r10, r10, #1 << 6 @ set bit #6 + mcreq p15, 0, r10, c15, c0, 1 @ write diagnostic register +#endif 3: mov r10, #0 #ifdef HARVARD_CACHE @@ -365,7 +373,7 @@ __v7_ca9mp_proc_info: b __v7_ca9mp_setup .long cpu_arch_name .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS .long cpu_v7_name .long v7_processor_functions .long v7wbi_tlb_fns diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index a202a2ce6e3d..6cd151b31bc5 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -320,6 +320,7 @@ void flush_iotlb_page(struct iommu *obj, u32 da) if ((start <= da) && (da < start + bytes)) { dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n", __func__, start, da, bytes); + iotlb_load_cr(obj, &cr); iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY); } } diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index 04d9521ddc9f..e8f2be2d67f2 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -435,7 +435,6 @@ static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state) static int s3c_adc_resume(struct platform_device *pdev) { struct adc_device *adc = platform_get_drvdata(pdev); - unsigned long flags; clk_enable(adc->clk); enable_irq(adc->irq); diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 90a20512d68d..e8d20b0bc50e 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -48,6 +48,9 @@ #include <plat/clock.h> #include <plat/cpu.h> +#include <linux/serial_core.h> +#include <plat/regs-serial.h> /* for s3c24xx_uart_devs */ + /* clock information */ static LIST_HEAD(clocks); @@ -65,6 +68,28 @@ static int clk_null_enable(struct clk *clk, int enable) return 0; } +static int dev_is_s3c_uart(struct device *dev) +{ + struct platform_device **pdev = s3c24xx_uart_devs; + int i; + for (i = 0; i < ARRAY_SIZE(s3c24xx_uart_devs); i++, pdev++) + if (*pdev && dev == &(*pdev)->dev) + return 1; + return 0; +} + +/* + * Serial drivers call get_clock() very early, before platform bus + * has been set up, this requires a special check to let them get + * a proper clock + */ + +static int dev_is_platform_device(struct device *dev) +{ + return dev->bus == &platform_bus_type || + (dev->bus == NULL && dev_is_s3c_uart(dev)); +} + /* Clock API calls */ struct clk *clk_get(struct device *dev, const char *id) @@ -73,7 +98,7 @@ struct clk *clk_get(struct device *dev, const char *id) struct clk *clk = ERR_PTR(-ENOENT); int idno; - if (dev == NULL || dev->bus != &platform_bus_type) + if (dev == NULL || !dev_is_platform_device(dev)) idno = -1; else idno = to_platform_device(dev)->id; diff --git a/arch/mips/include/asm/siginfo.h b/arch/mips/include/asm/siginfo.h index 96e28f18dad1..1ca64b4d33d9 100644 --- a/arch/mips/include/asm/siginfo.h +++ b/arch/mips/include/asm/siginfo.h @@ -88,6 +88,7 @@ typedef struct siginfo { #ifdef __ARCH_SI_TRAPNO int _trapno; /* TRAP # which caused the signal */ #endif + short _addr_lsb; } _sigfault; /* SIGPOLL, SIGXFSZ (To do ...) */ diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd.c b/arch/x86/kernel/cpu/mcheck/mce_amd.c index 5e975298fa81..39aaee5c1ab2 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_amd.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd.c @@ -141,6 +141,7 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c) address = (low & MASK_BLKPTR_LO) >> 21; if (!address) break; + address += MCG_XBLK_ADDR; } else ++address; @@ -148,12 +149,8 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c) if (rdmsr_safe(address, &low, &high)) break; - if (!(high & MASK_VALID_HI)) { - if (block) - continue; - else - break; - } + if (!(high & MASK_VALID_HI)) + continue; if (!(high & MASK_CNTP_HI) || (high & MASK_LOCKED_HI)) diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c index d9368eeda309..169d8804a9f8 100644 --- a/arch/x86/kernel/cpu/mcheck/therm_throt.c +++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c @@ -216,7 +216,7 @@ static __cpuinit int thermal_throttle_add_dev(struct sys_device *sys_dev, err = sysfs_add_file_to_group(&sys_dev->kobj, &attr_core_power_limit_count.attr, thermal_attr_group.name); - if (cpu_has(c, X86_FEATURE_PTS)) + if (cpu_has(c, X86_FEATURE_PTS)) { err = sysfs_add_file_to_group(&sys_dev->kobj, &attr_package_throttle_count.attr, thermal_attr_group.name); @@ -224,6 +224,7 @@ static __cpuinit int thermal_throttle_add_dev(struct sys_device *sys_dev, err = sysfs_add_file_to_group(&sys_dev->kobj, &attr_package_power_limit_count.attr, thermal_attr_group.name); + } return err; } diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index bc5b9b8d4a33..81ed28cb36e6 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -766,7 +766,6 @@ static void init_vmcb(struct vcpu_svm *svm) control->iopm_base_pa = iopm_base; control->msrpm_base_pa = __pa(svm->msrpm); - control->tsc_offset = 0; control->int_ctl = V_INTR_MASKING_MASK; init_seg(&save->es); @@ -902,6 +901,7 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id) svm->vmcb_pa = page_to_pfn(page) << PAGE_SHIFT; svm->asid_generation = 0; init_vmcb(svm); + svm->vmcb->control.tsc_offset = 0-native_read_tsc(); err = fx_init(&svm->vcpu); if (err) diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index f9897f7a9ef1..9c0d0d399c30 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -420,9 +420,11 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end) return -1; } - for_each_node_mask(i, nodes_parsed) - e820_register_active_regions(i, nodes[i].start >> PAGE_SHIFT, - nodes[i].end >> PAGE_SHIFT); + for (i = 0; i < num_node_memblks; i++) + e820_register_active_regions(memblk_nodeid[i], + node_memblk_range[i].start >> PAGE_SHIFT, + node_memblk_range[i].end >> PAGE_SHIFT); + /* for out of order entries in SRAT */ sort_node_map(); if (!nodes_cover_memory(nodes)) { diff --git a/block/elevator.c b/block/elevator.c index 205b09a5bd9e..4e11559aa2b0 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -938,6 +938,7 @@ int elv_register_queue(struct request_queue *q) } } kobject_uevent(&e->kobj, KOBJ_ADD); + e->registered = 1; } return error; } @@ -947,6 +948,7 @@ static void __elv_unregister_queue(struct elevator_queue *e) { kobject_uevent(&e->kobj, KOBJ_REMOVE); kobject_del(&e->kobj); + e->registered = 0; } void elv_unregister_queue(struct request_queue *q) @@ -1042,11 +1044,13 @@ static int elevator_switch(struct request_queue *q, struct elevator_type *new_e) spin_unlock_irq(q->queue_lock); - __elv_unregister_queue(old_elevator); + if (old_elevator->registered) { + __elv_unregister_queue(old_elevator); - err = elv_register_queue(q); - if (err) - goto fail_register; + err = elv_register_queue(q); + if (err) + goto fail_register; + } /* * finally exit old elevator and turn off BYPASS. diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c index f7619600270a..af308d03f492 100644 --- a/drivers/acpi/blacklist.c +++ b/drivers/acpi/blacklist.c @@ -204,6 +204,23 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { }, }, { + /* + * There have a NVIF method in MSI GX723 DSDT need call by Nvidia + * driver (e.g. nouveau) when user press brightness hotkey. + * Currently, nouveau driver didn't do the job and it causes there + * have a infinite while loop in DSDT when user press hotkey. + * We add MSI GX723's dmi information to this table for workaround + * this issue. + * Will remove MSI GX723 from the table after nouveau grows support. + */ + .callback = dmi_disable_osi_vista, + .ident = "MSI GX723", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"), + DMI_MATCH(DMI_PRODUCT_NAME, "GX723"), + }, + }, + { .callback = dmi_disable_osi_vista, .ident = "Sony VGN-NS10J_S", .matches = { diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index b618f888d66b..bec561c14beb 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -346,4 +346,5 @@ void __init acpi_early_processor_set_pdc(void) acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, early_init_pdc, NULL, NULL, NULL); + acpi_get_devices("ACPI0007", early_init_pdc, NULL, NULL); } diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 2aafafca2b13..1101e251a629 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -202,6 +202,7 @@ static int virtblk_get_id(struct gendisk *disk, char *id_str) struct virtio_blk *vblk = disk->private_data; struct request *req; struct bio *bio; + int err; bio = bio_map_kern(vblk->disk->queue, id_str, VIRTIO_BLK_ID_BYTES, GFP_KERNEL); @@ -215,7 +216,10 @@ static int virtblk_get_id(struct gendisk *disk, char *id_str) } req->cmd_type = REQ_TYPE_SPECIAL; - return blk_execute_rq(vblk->disk->queue, vblk->disk, req, false); + err = blk_execute_rq(vblk->disk->queue, vblk->disk, req, false); + blk_put_request(req); + + return err; } static int virtblk_locked_ioctl(struct block_device *bdev, fmode_t mode, diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index c74e4e8006d4..2dd2c93ebfa3 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -2231,6 +2231,9 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) dev_priv->mchdev_lock = &mchdev_lock; spin_unlock(&mchdev_lock); + /* XXX Prevent module unload due to memory corruption bugs. */ + __module_get(THIS_MODULE); + return 0; out_workqueue_free: diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c index 56ad9df2ccb5..b61966c126d3 100644 --- a/drivers/gpu/drm/i915/intel_fb.c +++ b/drivers/gpu/drm/i915/intel_fb.c @@ -238,8 +238,8 @@ int intel_fbdev_destroy(struct drm_device *dev, drm_framebuffer_cleanup(&ifb->base); if (ifb->obj) { - drm_gem_object_handle_unreference(ifb->obj); drm_gem_object_unreference(ifb->obj); + ifb->obj = NULL; } return 0; diff --git a/drivers/gpu/drm/nouveau/nouveau_fbcon.c b/drivers/gpu/drm/nouveau/nouveau_fbcon.c index d2047713dc59..dbd30b2e43fd 100644 --- a/drivers/gpu/drm/nouveau/nouveau_fbcon.c +++ b/drivers/gpu/drm/nouveau/nouveau_fbcon.c @@ -352,7 +352,6 @@ nouveau_fbcon_destroy(struct drm_device *dev, struct nouveau_fbdev *nfbdev) if (nouveau_fb->nvbo) { nouveau_bo_unmap(nouveau_fb->nvbo); - drm_gem_object_handle_unreference_unlocked(nouveau_fb->nvbo->gem); drm_gem_object_unreference_unlocked(nouveau_fb->nvbo->gem); nouveau_fb->nvbo = NULL; } diff --git a/drivers/gpu/drm/nouveau/nouveau_notifier.c b/drivers/gpu/drm/nouveau/nouveau_notifier.c index 3c9964a8fbad..3ec181ff50ce 100644 --- a/drivers/gpu/drm/nouveau/nouveau_notifier.c +++ b/drivers/gpu/drm/nouveau/nouveau_notifier.c @@ -79,7 +79,6 @@ nouveau_notifier_takedown_channel(struct nouveau_channel *chan) mutex_lock(&dev->struct_mutex); nouveau_bo_unpin(chan->notifier_bo); mutex_unlock(&dev->struct_mutex); - drm_gem_object_handle_unreference_unlocked(chan->notifier_bo->gem); drm_gem_object_unreference_unlocked(chan->notifier_bo->gem); drm_mm_takedown(&chan->notifier_heap); } diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 79082d4398ae..2f93d46ae69a 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -1137,7 +1137,7 @@ static void evergreen_gpu_init(struct radeon_device *rdev) WREG32(RCU_IND_INDEX, 0x203); efuse_straps_3 = RREG32(RCU_IND_DATA); - efuse_box_bit_127_124 = (u8)(efuse_straps_3 & 0xF0000000) >> 28; + efuse_box_bit_127_124 = (u8)((efuse_straps_3 & 0xF0000000) >> 28); switch(efuse_box_bit_127_124) { case 0x0: @@ -1407,6 +1407,7 @@ int evergreen_mc_init(struct radeon_device *rdev) rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024; rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE) * 1024 * 1024; rdev->mc.visible_vram_size = rdev->mc.aper_size; + rdev->mc.active_vram_size = rdev->mc.visible_vram_size; r600_vram_gtt_location(rdev, &rdev->mc); radeon_update_bandwidth_info(rdev); @@ -1520,7 +1521,7 @@ void evergreen_disable_interrupt_state(struct radeon_device *rdev) { u32 tmp; - WREG32(CP_INT_CNTL, 0); + WREG32(CP_INT_CNTL, CNTX_BUSY_INT_ENABLE | CNTX_EMPTY_INT_ENABLE); WREG32(GRBM_INT_CNTL, 0); WREG32(INT_MASK + EVERGREEN_CRTC0_REGISTER_OFFSET, 0); WREG32(INT_MASK + EVERGREEN_CRTC1_REGISTER_OFFSET, 0); diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index e151f16a8f86..e59422320bb6 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -1030,6 +1030,7 @@ int r100_cp_init(struct radeon_device *rdev, unsigned ring_size) return r; } rdev->cp.ready = true; + rdev->mc.active_vram_size = rdev->mc.real_vram_size; return 0; } @@ -1047,6 +1048,7 @@ void r100_cp_fini(struct radeon_device *rdev) void r100_cp_disable(struct radeon_device *rdev) { /* Disable ring */ + rdev->mc.active_vram_size = rdev->mc.visible_vram_size; rdev->cp.ready = false; WREG32(RADEON_CP_CSQ_MODE, 0); WREG32(RADEON_CP_CSQ_CNTL, 0); @@ -2295,6 +2297,7 @@ void r100_vram_init_sizes(struct radeon_device *rdev) /* FIXME we don't use the second aperture yet when we could use it */ if (rdev->mc.visible_vram_size > rdev->mc.aper_size) rdev->mc.visible_vram_size = rdev->mc.aper_size; + rdev->mc.active_vram_size = rdev->mc.visible_vram_size; config_aper_size = RREG32(RADEON_CONFIG_APER_SIZE); if (rdev->flags & RADEON_IS_IGP) { uint32_t tom; diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 7a04959ba0ee..7b65e4efe8af 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1248,6 +1248,7 @@ int r600_mc_init(struct radeon_device *rdev) rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE); rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE); rdev->mc.visible_vram_size = rdev->mc.aper_size; + rdev->mc.active_vram_size = rdev->mc.visible_vram_size; r600_vram_gtt_location(rdev, &rdev->mc); if (rdev->flags & RADEON_IS_IGP) { @@ -1917,6 +1918,7 @@ void r600_pciep_wreg(struct radeon_device *rdev, u32 reg, u32 v) */ void r600_cp_stop(struct radeon_device *rdev) { + rdev->mc.active_vram_size = rdev->mc.visible_vram_size; WREG32(R_0086D8_CP_ME_CNTL, S_0086D8_CP_ME_HALT(1)); } @@ -2910,7 +2912,7 @@ static void r600_disable_interrupt_state(struct radeon_device *rdev) { u32 tmp; - WREG32(CP_INT_CNTL, 0); + WREG32(CP_INT_CNTL, CNTX_BUSY_INT_ENABLE | CNTX_EMPTY_INT_ENABLE); WREG32(GRBM_INT_CNTL, 0); WREG32(DxMODE_INT_MASK, 0); if (ASIC_IS_DCE3(rdev)) { diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c index 9ceb2a1ce799..3473c00781ff 100644 --- a/drivers/gpu/drm/radeon/r600_blit_kms.c +++ b/drivers/gpu/drm/radeon/r600_blit_kms.c @@ -532,6 +532,7 @@ int r600_blit_init(struct radeon_device *rdev) memcpy(ptr + rdev->r600_blit.ps_offset, r6xx_ps, r6xx_ps_size * 4); radeon_bo_kunmap(rdev->r600_blit.shader_obj); radeon_bo_unreserve(rdev->r600_blit.shader_obj); + rdev->mc.active_vram_size = rdev->mc.real_vram_size; return 0; } @@ -539,6 +540,7 @@ void r600_blit_fini(struct radeon_device *rdev) { int r; + rdev->mc.active_vram_size = rdev->mc.visible_vram_size; if (rdev->r600_blit.shader_obj == NULL) return; /* If we can't reserve the bo, unref should be enough to destroy diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index a168d644bf9e..9ff38c99a6ea 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -344,6 +344,7 @@ struct radeon_mc { * about vram size near mc fb location */ u64 mc_vram_size; u64 visible_vram_size; + u64 active_vram_size; u64 gtt_size; u64 gtt_start; u64 gtt_end; diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 68932ba7b8a4..8e43ddae70cc 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -1558,39 +1558,39 @@ radeon_atombios_get_tv_info(struct radeon_device *rdev) switch (tv_info->ucTV_BootUpDefaultStandard) { case ATOM_TV_NTSC: tv_std = TV_STD_NTSC; - DRM_INFO("Default TV standard: NTSC\n"); + DRM_DEBUG_KMS("Default TV standard: NTSC\n"); break; case ATOM_TV_NTSCJ: tv_std = TV_STD_NTSC_J; - DRM_INFO("Default TV standard: NTSC-J\n"); + DRM_DEBUG_KMS("Default TV standard: NTSC-J\n"); break; case ATOM_TV_PAL: tv_std = TV_STD_PAL; - DRM_INFO("Default TV standard: PAL\n"); + DRM_DEBUG_KMS("Default TV standard: PAL\n"); break; case ATOM_TV_PALM: tv_std = TV_STD_PAL_M; - DRM_INFO("Default TV standard: PAL-M\n"); + DRM_DEBUG_KMS("Default TV standard: PAL-M\n"); break; case ATOM_TV_PALN: tv_std = TV_STD_PAL_N; - DRM_INFO("Default TV standard: PAL-N\n"); + DRM_DEBUG_KMS("Default TV standard: PAL-N\n"); break; case ATOM_TV_PALCN: tv_std = TV_STD_PAL_CN; - DRM_INFO("Default TV standard: PAL-CN\n"); + DRM_DEBUG_KMS("Default TV standard: PAL-CN\n"); break; case ATOM_TV_PAL60: tv_std = TV_STD_PAL_60; - DRM_INFO("Default TV standard: PAL-60\n"); + DRM_DEBUG_KMS("Default TV standard: PAL-60\n"); break; case ATOM_TV_SECAM: tv_std = TV_STD_SECAM; - DRM_INFO("Default TV standard: SECAM\n"); + DRM_DEBUG_KMS("Default TV standard: SECAM\n"); break; default: tv_std = TV_STD_NTSC; - DRM_INFO("Unknown TV standard; defaulting to NTSC\n"); + DRM_DEBUG_KMS("Unknown TV standard; defaulting to NTSC\n"); break; } } diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index a04b7a6ad95f..7b7ea269549c 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -913,47 +913,47 @@ radeon_combios_get_tv_info(struct radeon_device *rdev) switch (RBIOS8(tv_info + 7) & 0xf) { case 1: tv_std = TV_STD_NTSC; - DRM_INFO("Default TV standard: NTSC\n"); + DRM_DEBUG_KMS("Default TV standard: NTSC\n"); break; case 2: tv_std = TV_STD_PAL; - DRM_INFO("Default TV standard: PAL\n"); + DRM_DEBUG_KMS("Default TV standard: PAL\n"); break; case 3: tv_std = TV_STD_PAL_M; - DRM_INFO("Default TV standard: PAL-M\n"); + DRM_DEBUG_KMS("Default TV standard: PAL-M\n"); break; case 4: tv_std = TV_STD_PAL_60; - DRM_INFO("Default TV standard: PAL-60\n"); + DRM_DEBUG_KMS("Default TV standard: PAL-60\n"); break; case 5: tv_std = TV_STD_NTSC_J; - DRM_INFO("Default TV standard: NTSC-J\n"); + DRM_DEBUG_KMS("Default TV standard: NTSC-J\n"); break; case 6: tv_std = TV_STD_SCART_PAL; - DRM_INFO("Default TV standard: SCART-PAL\n"); + DRM_DEBUG_KMS("Default TV standard: SCART-PAL\n"); break; default: tv_std = TV_STD_NTSC; - DRM_INFO + DRM_DEBUG_KMS ("Unknown TV standard; defaulting to NTSC\n"); break; } switch ((RBIOS8(tv_info + 9) >> 2) & 0x3) { case 0: - DRM_INFO("29.498928713 MHz TV ref clk\n"); + DRM_DEBUG_KMS("29.498928713 MHz TV ref clk\n"); break; case 1: - DRM_INFO("28.636360000 MHz TV ref clk\n"); + DRM_DEBUG_KMS("28.636360000 MHz TV ref clk\n"); break; case 2: - DRM_INFO("14.318180000 MHz TV ref clk\n"); + DRM_DEBUG_KMS("14.318180000 MHz TV ref clk\n"); break; case 3: - DRM_INFO("27.000000000 MHz TV ref clk\n"); + DRM_DEBUG_KMS("27.000000000 MHz TV ref clk\n"); break; default: break; @@ -1324,7 +1324,7 @@ bool radeon_legacy_get_tmds_info_from_combios(struct radeon_encoder *encoder, if (tmds_info) { ver = RBIOS8(tmds_info); - DRM_INFO("DFP table revision: %d\n", ver); + DRM_DEBUG_KMS("DFP table revision: %d\n", ver); if (ver == 3) { n = RBIOS8(tmds_info + 5) + 1; if (n > 4) @@ -1408,7 +1408,7 @@ bool radeon_legacy_get_ext_tmds_info_from_combios(struct radeon_encoder *encoder offset = combios_get_table_offset(dev, COMBIOS_EXT_TMDS_INFO_TABLE); if (offset) { ver = RBIOS8(offset); - DRM_INFO("External TMDS Table revision: %d\n", ver); + DRM_DEBUG_KMS("External TMDS Table revision: %d\n", ver); tmds->slave_addr = RBIOS8(offset + 4 + 2); tmds->slave_addr >>= 1; /* 7 bit addressing */ gpio = RBIOS8(offset + 4 + 3); diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c index 9cdf6a35bc2c..40b0c087b592 100644 --- a/drivers/gpu/drm/radeon/radeon_fb.c +++ b/drivers/gpu/drm/radeon/radeon_fb.c @@ -97,7 +97,6 @@ static void radeonfb_destroy_pinned_object(struct drm_gem_object *gobj) radeon_bo_unpin(rbo); radeon_bo_unreserve(rbo); } - drm_gem_object_handle_unreference(gobj); drm_gem_object_unreference_unlocked(gobj); } diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c index 0afd1e62347d..b3b5306bb578 100644 --- a/drivers/gpu/drm/radeon/radeon_object.c +++ b/drivers/gpu/drm/radeon/radeon_object.c @@ -69,7 +69,7 @@ void radeon_ttm_placement_from_domain(struct radeon_bo *rbo, u32 domain) u32 c = 0; rbo->placement.fpfn = 0; - rbo->placement.lpfn = 0; + rbo->placement.lpfn = rbo->rdev->mc.active_vram_size >> PAGE_SHIFT; rbo->placement.placement = rbo->placements; rbo->placement.busy_placement = rbo->placements; if (domain & RADEON_GEM_DOMAIN_VRAM) diff --git a/drivers/gpu/drm/radeon/radeon_object.h b/drivers/gpu/drm/radeon/radeon_object.h index 353998dc2c03..3481bc7f6f58 100644 --- a/drivers/gpu/drm/radeon/radeon_object.h +++ b/drivers/gpu/drm/radeon/radeon_object.h @@ -124,11 +124,8 @@ static inline int radeon_bo_wait(struct radeon_bo *bo, u32 *mem_type, int r; r = ttm_bo_reserve(&bo->tbo, true, no_wait, false, 0); - if (unlikely(r != 0)) { - if (r != -ERESTARTSYS) - dev_err(bo->rdev->dev, "%p reserve failed for wait\n", bo); + if (unlikely(r != 0)) return r; - } spin_lock(&bo->tbo.lock); if (mem_type) *mem_type = bo->tbo.mem.mem_type; diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index cc05b230d7ef..51d5f7b5ab21 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -693,6 +693,7 @@ void rs600_mc_init(struct radeon_device *rdev) rdev->mc.real_vram_size = RREG32(RADEON_CONFIG_MEMSIZE); rdev->mc.mc_vram_size = rdev->mc.real_vram_size; rdev->mc.visible_vram_size = rdev->mc.aper_size; + rdev->mc.active_vram_size = rdev->mc.visible_vram_size; rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev); base = RREG32_MC(R_000004_MC_FB_LOCATION); base = G_000004_MC_FB_START(base) << 16; diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c index 3e3f75718be3..4dc2a87ea680 100644 --- a/drivers/gpu/drm/radeon/rs690.c +++ b/drivers/gpu/drm/radeon/rs690.c @@ -157,6 +157,7 @@ void rs690_mc_init(struct radeon_device *rdev) rdev->mc.aper_base = pci_resource_start(rdev->pdev, 0); rdev->mc.aper_size = pci_resource_len(rdev->pdev, 0); rdev->mc.visible_vram_size = rdev->mc.aper_size; + rdev->mc.active_vram_size = rdev->mc.visible_vram_size; base = RREG32_MC(R_000100_MCCFG_FB_LOCATION); base = G_000100_MC_FB_START(base) << 16; rdev->mc.igp_sideport_enabled = radeon_atombios_sideport_present(rdev); diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index bfa59db374d2..9490da700749 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -267,6 +267,7 @@ static void rv770_mc_program(struct radeon_device *rdev) */ void r700_cp_stop(struct radeon_device *rdev) { + rdev->mc.active_vram_size = rdev->mc.visible_vram_size; WREG32(CP_ME_CNTL, (CP_ME_HALT | CP_PFP_HALT)); } @@ -992,6 +993,7 @@ int rv770_mc_init(struct radeon_device *rdev) rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE); rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE); rdev->mc.visible_vram_size = rdev->mc.aper_size; + rdev->mc.active_vram_size = rdev->mc.visible_vram_size; r600_vram_gtt_location(rdev, &rdev->mc); radeon_update_bandwidth_info(rdev); diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index cb4cf7ef4d1e..db809e034cc4 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -442,6 +442,43 @@ out_err: } /** + * Call bo::reserved and with the lru lock held. + * Will release GPU memory type usage on destruction. + * This is the place to put in driver specific hooks. + * Will release the bo::reserved lock and the + * lru lock on exit. + */ + +static void ttm_bo_cleanup_memtype_use(struct ttm_buffer_object *bo) +{ + struct ttm_bo_global *glob = bo->glob; + + if (bo->ttm) { + + /** + * Release the lru_lock, since we don't want to have + * an atomic requirement on ttm_tt[unbind|destroy]. + */ + + spin_unlock(&glob->lru_lock); + ttm_tt_unbind(bo->ttm); + ttm_tt_destroy(bo->ttm); + bo->ttm = NULL; + spin_lock(&glob->lru_lock); + } + + if (bo->mem.mm_node) { + drm_mm_put_block(bo->mem.mm_node); + bo->mem.mm_node = NULL; + } + + atomic_set(&bo->reserved, 0); + wake_up_all(&bo->event_queue); + spin_unlock(&glob->lru_lock); +} + + +/** * If bo idle, remove from delayed- and lru lists, and unref. * If not idle, and already on delayed list, do nothing. * If not idle, and not on delayed list, put on delayed list, @@ -456,6 +493,7 @@ static int ttm_bo_cleanup_refs(struct ttm_buffer_object *bo, bool remove_all) int ret; spin_lock(&bo->lock); +retry: (void) ttm_bo_wait(bo, false, false, !remove_all); if (!bo->sync_obj) { @@ -464,31 +502,52 @@ static int ttm_bo_cleanup_refs(struct ttm_buffer_object *bo, bool remove_all) spin_unlock(&bo->lock); spin_lock(&glob->lru_lock); - put_count = ttm_bo_del_from_lru(bo); + ret = ttm_bo_reserve_locked(bo, false, !remove_all, false, 0); + + /** + * Someone else has the object reserved. Bail and retry. + */ - ret = ttm_bo_reserve_locked(bo, false, false, false, 0); - BUG_ON(ret); - if (bo->ttm) - ttm_tt_unbind(bo->ttm); + if (unlikely(ret == -EBUSY)) { + spin_unlock(&glob->lru_lock); + spin_lock(&bo->lock); + goto requeue; + } + + /** + * We can re-check for sync object without taking + * the bo::lock since setting the sync object requires + * also bo::reserved. A busy object at this point may + * be caused by another thread starting an accelerated + * eviction. + */ + + if (unlikely(bo->sync_obj)) { + atomic_set(&bo->reserved, 0); + wake_up_all(&bo->event_queue); + spin_unlock(&glob->lru_lock); + spin_lock(&bo->lock); + if (remove_all) + goto retry; + else + goto requeue; + } + + put_count = ttm_bo_del_from_lru(bo); if (!list_empty(&bo->ddestroy)) { list_del_init(&bo->ddestroy); ++put_count; } - if (bo->mem.mm_node) { - drm_mm_put_block(bo->mem.mm_node); - bo->mem.mm_node = NULL; - } - spin_unlock(&glob->lru_lock); - atomic_set(&bo->reserved, 0); + ttm_bo_cleanup_memtype_use(bo); while (put_count--) kref_put(&bo->list_kref, ttm_bo_ref_bug); return 0; } - +requeue: spin_lock(&glob->lru_lock); if (list_empty(&bo->ddestroy)) { void *sync_obj = bo->sync_obj; diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c index f7bd2613cecc..f2de3be35df3 100644 --- a/drivers/i2c/busses/i2c-cpm.c +++ b/drivers/i2c/busses/i2c-cpm.c @@ -677,6 +677,11 @@ static int __devinit cpm_i2c_probe(struct platform_device *ofdev, dev_dbg(&ofdev->dev, "hw routines for %s registered.\n", cpm->adap.name); + /* + * register OF I2C devices + */ + of_i2c_register_devices(&cpm->adap); + return 0; out_shut: cpm_i2c_shutdown(cpm); diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index 43ca32fddde2..89eedf45d30e 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -761,6 +761,9 @@ static int __devinit iic_probe(struct platform_device *ofdev, dev_info(&ofdev->dev, "using %s mode\n", dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)"); + /* Now register all the child nodes */ + of_i2c_register_devices(adap); + return 0; error_cleanup: diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index a1c419a716af..b74e6dc6886c 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -632,6 +632,7 @@ static int __devinit fsl_i2c_probe(struct platform_device *op, dev_err(i2c->dev, "failed to add adapter\n"); goto fail_add; } + of_i2c_register_devices(&i2c->adap); return result; diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c index bbd77603a417..29933f87d8fa 100644 --- a/drivers/i2c/busses/i2c-pca-isa.c +++ b/drivers/i2c/busses/i2c-pca-isa.c @@ -71,8 +71,8 @@ static int pca_isa_readbyte(void *pd, int reg) static int pca_isa_waitforcompletion(void *pd) { - long ret = ~0; unsigned long timeout; + long ret; if (irq > -1) { ret = wait_event_timeout(pca_wait, @@ -81,11 +81,15 @@ static int pca_isa_waitforcompletion(void *pd) } else { /* Do polling */ timeout = jiffies + pca_isa_ops.timeout; - while (((pca_isa_readbyte(pd, I2C_PCA_CON) - & I2C_PCA_CON_SI) == 0) - && (ret = time_before(jiffies, timeout))) + do { + ret = time_before(jiffies, timeout); + if (pca_isa_readbyte(pd, I2C_PCA_CON) + & I2C_PCA_CON_SI) + break; udelay(100); + } while (ret); } + return ret > 0; } diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c index ef5c78487eb7..5f6d7f89e225 100644 --- a/drivers/i2c/busses/i2c-pca-platform.c +++ b/drivers/i2c/busses/i2c-pca-platform.c @@ -80,8 +80,8 @@ static void i2c_pca_pf_writebyte32(void *pd, int reg, int val) static int i2c_pca_pf_waitforcompletion(void *pd) { struct i2c_pca_pf_data *i2c = pd; - long ret = ~0; unsigned long timeout; + long ret; if (i2c->irq) { ret = wait_event_timeout(i2c->wait, @@ -90,10 +90,13 @@ static int i2c_pca_pf_waitforcompletion(void *pd) } else { /* Do polling */ timeout = jiffies + i2c->adap.timeout; - while (((i2c->algo_data.read_byte(i2c, I2C_PCA_CON) - & I2C_PCA_CON_SI) == 0) - && (ret = time_before(jiffies, timeout))) + do { + ret = time_before(jiffies, timeout); + if (i2c->algo_data.read_byte(i2c, I2C_PCA_CON) + & I2C_PCA_CON_SI) + break; udelay(100); + } while (ret); } return ret > 0; diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 6649176de940..bea4c5021d26 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -32,7 +32,6 @@ #include <linux/init.h> #include <linux/idr.h> #include <linux/mutex.h> -#include <linux/of_i2c.h> #include <linux/of_device.h> #include <linux/completion.h> #include <linux/hardirq.h> @@ -197,11 +196,12 @@ static int i2c_device_pm_suspend(struct device *dev) { const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - if (pm_runtime_suspended(dev)) - return 0; - - if (pm) - return pm->suspend ? pm->suspend(dev) : 0; + if (pm) { + if (pm_runtime_suspended(dev)) + return 0; + else + return pm->suspend ? pm->suspend(dev) : 0; + } return i2c_legacy_suspend(dev, PMSG_SUSPEND); } @@ -216,12 +216,6 @@ static int i2c_device_pm_resume(struct device *dev) else ret = i2c_legacy_resume(dev); - if (!ret) { - pm_runtime_disable(dev); - pm_runtime_set_active(dev); - pm_runtime_enable(dev); - } - return ret; } @@ -229,11 +223,12 @@ static int i2c_device_pm_freeze(struct device *dev) { const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - if (pm_runtime_suspended(dev)) - return 0; - - if (pm) - return pm->freeze ? pm->freeze(dev) : 0; + if (pm) { + if (pm_runtime_suspended(dev)) + return 0; + else + return pm->freeze ? pm->freeze(dev) : 0; + } return i2c_legacy_suspend(dev, PMSG_FREEZE); } @@ -242,11 +237,12 @@ static int i2c_device_pm_thaw(struct device *dev) { const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - if (pm_runtime_suspended(dev)) - return 0; - - if (pm) - return pm->thaw ? pm->thaw(dev) : 0; + if (pm) { + if (pm_runtime_suspended(dev)) + return 0; + else + return pm->thaw ? pm->thaw(dev) : 0; + } return i2c_legacy_resume(dev); } @@ -255,11 +251,12 @@ static int i2c_device_pm_poweroff(struct device *dev) { const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL; - if (pm_runtime_suspended(dev)) - return 0; - - if (pm) - return pm->poweroff ? pm->poweroff(dev) : 0; + if (pm) { + if (pm_runtime_suspended(dev)) + return 0; + else + return pm->poweroff ? pm->poweroff(dev) : 0; + } return i2c_legacy_suspend(dev, PMSG_HIBERNATE); } @@ -876,9 +873,6 @@ static int i2c_register_adapter(struct i2c_adapter *adap) if (adap->nr < __i2c_first_dynamic_bus_num) i2c_scan_static_board_info(adap); - /* Register devices from the device tree */ - of_i2c_register_devices(adap); - /* Notify drivers */ mutex_lock(&core_lock); bus_for_each_drv(&i2c_bus_type, NULL, adap, __process_new_adapter); diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index 0906fc5b69b9..c37ef64d1465 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -157,13 +157,13 @@ static struct cpuidle_state atom_cstates[MWAIT_MAX_NUM_CSTATES] = { { /* MWAIT C5 */ }, { /* MWAIT C6 */ .name = "ATM-C6", - .desc = "MWAIT 0x40", - .driver_data = (void *) 0x40, + .desc = "MWAIT 0x52", + .driver_data = (void *) 0x52, .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TLB_FLUSHED, - .exit_latency = 200, + .exit_latency = 140, .power_usage = 150, - .target_residency = 800, - .enter = NULL }, /* disabled */ + .target_residency = 560, + .enter = &intel_idle }, }; /** diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index d85bd8a7967d..22239e988498 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -483,6 +483,9 @@ static int joydev_handle_JSIOCSAXMAP(struct joydev *joydev, memcpy(joydev->abspam, abspam, len); + for (i = 0; i < joydev->nabs; i++) + joydev->absmap[joydev->abspam[i]] = i; + out: kfree(abspam); return retval; diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c index 0d4266a533a5..360698553eb5 100644 --- a/drivers/input/misc/uinput.c +++ b/drivers/input/misc/uinput.c @@ -404,6 +404,13 @@ static int uinput_setup_device(struct uinput_device *udev, const char __user *bu retval = uinput_validate_absbits(dev); if (retval < 0) goto exit; + if (test_bit(ABS_MT_SLOT, dev->absbit)) { + int nslot = input_abs_get_max(dev, ABS_MT_SLOT) + 1; + input_mt_create_slots(dev, nslot); + input_set_events_per_packet(dev, 6 * nslot); + } else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) { + input_set_events_per_packet(dev, 60); + } } udev->state = UIST_SETUP_COMPLETE; diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 42ba3691d908..b35876ee6908 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -103,27 +103,26 @@ static void wacom_sys_irq(struct urb *urb) static int wacom_open(struct input_dev *dev) { struct wacom *wacom = input_get_drvdata(dev); + int retval = 0; - mutex_lock(&wacom->lock); - - wacom->irq->dev = wacom->usbdev; - - if (usb_autopm_get_interface(wacom->intf) < 0) { - mutex_unlock(&wacom->lock); + if (usb_autopm_get_interface(wacom->intf) < 0) return -EIO; - } + + mutex_lock(&wacom->lock); if (usb_submit_urb(wacom->irq, GFP_KERNEL)) { - usb_autopm_put_interface(wacom->intf); - mutex_unlock(&wacom->lock); - return -EIO; + retval = -EIO; + goto out; } wacom->open = true; wacom->intf->needs_remote_wakeup = 1; +out: mutex_unlock(&wacom->lock); - return 0; + if (retval) + usb_autopm_put_interface(wacom->intf); + return retval; } static void wacom_close(struct input_dev *dev) @@ -135,6 +134,8 @@ static void wacom_close(struct input_dev *dev) wacom->open = false; wacom->intf->needs_remote_wakeup = 0; mutex_unlock(&wacom->lock); + + usb_autopm_put_interface(wacom->intf); } static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hid_desc, diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index 6e29badb969e..47fd7a041c52 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -442,8 +442,10 @@ static void wacom_intuos_general(struct wacom_wac *wacom) /* general pen packet */ if ((data[1] & 0xb8) == 0xa0) { t = (data[6] << 2) | ((data[7] >> 6) & 3); - if (features->type >= INTUOS4S && features->type <= INTUOS4L) + if ((features->type >= INTUOS4S && features->type <= INTUOS4L) || + features->type == WACOM_21UX2) { t = (t << 1) | (data[1] & 1); + } input_report_abs(input, ABS_PRESSURE, t); input_report_abs(input, ABS_TILT_X, ((data[7] << 1) & 0x7e) | (data[8] >> 7)); diff --git a/drivers/isdn/sc/interrupt.c b/drivers/isdn/sc/interrupt.c index 485be8b1e1b3..f0225bc0f267 100644 --- a/drivers/isdn/sc/interrupt.c +++ b/drivers/isdn/sc/interrupt.c @@ -112,11 +112,19 @@ irqreturn_t interrupt_handler(int dummy, void *card_inst) } else if(callid>=0x0000 && callid<=0x7FFF) { + int len; + pr_debug("%s: Got Incoming Call\n", sc_adapter[card]->devicename); - strcpy(setup.phone,&(rcvmsg.msg_data.byte_array[4])); - strcpy(setup.eazmsn, - sc_adapter[card]->channel[rcvmsg.phy_link_no-1].dn); + len = strlcpy(setup.phone, &(rcvmsg.msg_data.byte_array[4]), + sizeof(setup.phone)); + if (len >= sizeof(setup.phone)) + continue; + len = strlcpy(setup.eazmsn, + sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].dn, + sizeof(setup.eazmsn)); + if (len >= sizeof(setup.eazmsn)) + continue; setup.si1 = 7; setup.si2 = 0; setup.plan = 0; @@ -176,7 +184,9 @@ irqreturn_t interrupt_handler(int dummy, void *card_inst) * Handle a GetMyNumber Rsp */ if (IS_CE_MESSAGE(rcvmsg,Call,0,GetMyNumber)){ - strcpy(sc_adapter[card]->channel[rcvmsg.phy_link_no-1].dn,rcvmsg.msg_data.byte_array); + strlcpy(sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].dn, + rcvmsg.msg_data.byte_array, + sizeof(rcvmsg.msg_data.byte_array)); continue; } diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index ed4900ade93a..e4fb58db5454 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -1000,10 +1000,11 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start) page = bitmap->sb_page; offset = sizeof(bitmap_super_t); if (!file) - read_sb_page(bitmap->mddev, - bitmap->mddev->bitmap_info.offset, - page, - index, count); + page = read_sb_page( + bitmap->mddev, + bitmap->mddev->bitmap_info.offset, + page, + index, count); } else if (file) { page = read_page(file, index, bitmap, count); offset = 0; diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index ad83a4dcadc3..0b830bbe1d8b 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1839,7 +1839,9 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i /* take from bio_init */ bio->bi_next = NULL; + bio->bi_flags &= ~(BIO_POOL_MASK-1); bio->bi_flags |= 1 << BIO_UPTODATE; + bio->bi_comp_cpu = -1; bio->bi_rw = READ; bio->bi_vcnt = 0; bio->bi_idx = 0; @@ -1912,7 +1914,7 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) break; BUG_ON(sync_blocks < (PAGE_SIZE>>9)); - if (len > (sync_blocks<<9)) + if ((len >> 9) > sync_blocks) len = sync_blocks<<9; } diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c index 7e82a9df726b..7961d59f5cac 100644 --- a/drivers/media/IR/ir-keytable.c +++ b/drivers/media/IR/ir-keytable.c @@ -319,7 +319,7 @@ static void ir_timer_keyup(unsigned long cookie) * a keyup event might follow immediately after the keydown. */ spin_lock_irqsave(&ir->keylock, flags); - if (time_is_after_eq_jiffies(ir->keyup_jiffies)) + if (time_is_before_eq_jiffies(ir->keyup_jiffies)) ir_keyup(ir); spin_unlock_irqrestore(&ir->keylock, flags); } @@ -510,6 +510,13 @@ int __ir_input_register(struct input_dev *input_dev, (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_IR_RAW) ? " in raw mode" : ""); + /* + * Default delay of 250ms is too short for some protocols, expecially + * since the timeout is currently set to 250ms. Increase it to 500ms, + * to avoid wrong repetition of the keycodes. + */ + input_dev->rep[REP_DELAY] = 500; + return 0; out_event: diff --git a/drivers/media/IR/ir-lirc-codec.c b/drivers/media/IR/ir-lirc-codec.c index 77b5946413c0..e63f757d5d72 100644 --- a/drivers/media/IR/ir-lirc-codec.c +++ b/drivers/media/IR/ir-lirc-codec.c @@ -267,7 +267,7 @@ static int ir_lirc_register(struct input_dev *input_dev) features |= LIRC_CAN_SET_SEND_CARRIER; if (ir_dev->props->s_tx_duty_cycle) - features |= LIRC_CAN_SET_REC_DUTY_CYCLE; + features |= LIRC_CAN_SET_SEND_DUTY_CYCLE; } if (ir_dev->props->s_rx_carrier_range) diff --git a/drivers/media/IR/ir-raw-event.c b/drivers/media/IR/ir-raw-event.c index 43094e7eccfa..8e0e1b1f8c87 100644 --- a/drivers/media/IR/ir-raw-event.c +++ b/drivers/media/IR/ir-raw-event.c @@ -279,9 +279,11 @@ int ir_raw_event_register(struct input_dev *input_dev) "rc%u", (unsigned int)ir->devno); if (IS_ERR(ir->raw->thread)) { + int ret = PTR_ERR(ir->raw->thread); + kfree(ir->raw); ir->raw = NULL; - return PTR_ERR(ir->raw->thread); + return ret; } mutex_lock(&ir_raw_handler_lock); diff --git a/drivers/media/IR/ir-sysfs.c b/drivers/media/IR/ir-sysfs.c index 96dafc425c8e..46d42467f9b4 100644 --- a/drivers/media/IR/ir-sysfs.c +++ b/drivers/media/IR/ir-sysfs.c @@ -67,13 +67,14 @@ static ssize_t show_protocols(struct device *d, char *tmp = buf; int i; - if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE) { + if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) { enabled = ir_dev->rc_tab.ir_type; allowed = ir_dev->props->allowed_protos; - } else { + } else if (ir_dev->raw) { enabled = ir_dev->raw->enabled_protocols; allowed = ir_raw_get_allowed_protocols(); - } + } else + return sprintf(tmp, "[builtin]\n"); IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n", (long long)allowed, @@ -121,10 +122,14 @@ static ssize_t store_protocols(struct device *d, int rc, i, count = 0; unsigned long flags; - if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE) + if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) type = ir_dev->rc_tab.ir_type; - else + else if (ir_dev->raw) type = ir_dev->raw->enabled_protocols; + else { + IR_dprintk(1, "Protocol switching not supported\n"); + return -EINVAL; + } while ((tmp = strsep((char **) &data, " \n")) != NULL) { if (!*tmp) @@ -185,7 +190,7 @@ static ssize_t store_protocols(struct device *d, } } - if (ir_dev->props->driver_type == RC_DRIVER_SCANCODE) { + if (ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_SCANCODE) { spin_lock_irqsave(&ir_dev->rc_tab.lock, flags); ir_dev->rc_tab.ir_type = type; spin_unlock_irqrestore(&ir_dev->rc_tab.lock, flags); diff --git a/drivers/media/IR/keymaps/rc-rc6-mce.c b/drivers/media/IR/keymaps/rc-rc6-mce.c index 64264f7f838f..39557ad401b6 100644 --- a/drivers/media/IR/keymaps/rc-rc6-mce.c +++ b/drivers/media/IR/keymaps/rc-rc6-mce.c @@ -19,6 +19,7 @@ static struct ir_scancode rc6_mce[] = { { 0x800f0416, KEY_PLAY }, { 0x800f0418, KEY_PAUSE }, + { 0x800f046e, KEY_PLAYPAUSE }, { 0x800f0419, KEY_STOP }, { 0x800f0417, KEY_RECORD }, @@ -37,6 +38,8 @@ static struct ir_scancode rc6_mce[] = { { 0x800f0411, KEY_VOLUMEDOWN }, { 0x800f0412, KEY_CHANNELUP }, { 0x800f0413, KEY_CHANNELDOWN }, + { 0x800f043a, KEY_BRIGHTNESSUP }, + { 0x800f0480, KEY_BRIGHTNESSDOWN }, { 0x800f0401, KEY_NUMERIC_1 }, { 0x800f0402, KEY_NUMERIC_2 }, diff --git a/drivers/media/IR/mceusb.c b/drivers/media/IR/mceusb.c index ac6bb2c01a48..bc620e10ef77 100644 --- a/drivers/media/IR/mceusb.c +++ b/drivers/media/IR/mceusb.c @@ -120,6 +120,10 @@ static struct usb_device_id mceusb_dev_table[] = { { USB_DEVICE(VENDOR_PHILIPS, 0x0613) }, /* Philips eHome Infrared Transceiver */ { USB_DEVICE(VENDOR_PHILIPS, 0x0815) }, + /* Philips/Spinel plus IR transceiver for ASUS */ + { USB_DEVICE(VENDOR_PHILIPS, 0x206c) }, + /* Philips/Spinel plus IR transceiver for ASUS */ + { USB_DEVICE(VENDOR_PHILIPS, 0x2088) }, /* Realtek MCE IR Receiver */ { USB_DEVICE(VENDOR_REALTEK, 0x0161) }, /* SMK/Toshiba G83C0004D410 */ diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c index fe818348b8a3..48397f103d32 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_core.c +++ b/drivers/media/dvb/dvb-usb/dib0700_core.c @@ -673,9 +673,6 @@ static int dib0700_probe(struct usb_interface *intf, else dev->props.rc.core.bulk_mode = false; - /* Need a higher delay, to avoid wrong repeat */ - dev->rc_input_dev->rep[REP_DELAY] = 500; - dib0700_rc_setup(dev); return 0; diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index f634d2e784b2..e06acd1fecb6 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -940,6 +940,58 @@ static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap) return adap->fe == NULL ? -ENODEV : 0; } +/* STK7770P */ +static struct dib7000p_config dib7770p_dib7000p_config = { + .output_mpeg2_in_188_bytes = 1, + + .agc_config_count = 1, + .agc = &dib7070_agc_config, + .bw = &dib7070_bw_config_12_mhz, + .tuner_is_baseband = 1, + .spur_protect = 1, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .hostbus_diversity = 1, + .enable_current_mirror = 1, + .disable_sample_and_hold = 0, +}; + +static int stk7770p_frontend_attach(struct dvb_usb_adapter *adap) +{ + struct usb_device_descriptor *p = &adap->dev->udev->descriptor; + if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) && + p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E)) + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); + else + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); + + dib0700_ctrl_clock(adap->dev, 72, 1); + + msleep(10); + dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); + msleep(10); + dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); + + if (dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, + &dib7770p_dib7000p_config) != 0) { + err("%s: dib7000p_i2c_enumeration failed. Cannot continue\n", + __func__); + return -ENODEV; + } + + adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, + &dib7770p_dib7000p_config); + return adap->fe == NULL ? -ENODEV : 0; +} + /* DIB807x generic */ static struct dibx000_agc_config dib807x_agc_config[2] = { { @@ -1781,7 +1833,7 @@ struct usb_device_id dib0700_usb_id_table[] = { /* 60 */{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS_2) }, { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XPVR) }, { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK807XP) }, - { USB_DEVICE(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD) }, + { USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x000, 0x3f00) }, { USB_DEVICE(USB_VID_EVOLUTEPC, USB_PID_TVWAY_PLUS) }, /* 65 */{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV73ESE) }, { USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV282E) }, @@ -2406,7 +2458,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { .pid_filter_count = 32, .pid_filter = stk70x0p_pid_filter, .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, - .frontend_attach = stk7070p_frontend_attach, + .frontend_attach = stk7770p_frontend_attach, .tuner_attach = dib7770p_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x02), diff --git a/drivers/media/dvb/dvb-usb/opera1.c b/drivers/media/dvb/dvb-usb/opera1.c index 6b22ec64ab0c..f896337b4535 100644 --- a/drivers/media/dvb/dvb-usb/opera1.c +++ b/drivers/media/dvb/dvb-usb/opera1.c @@ -483,9 +483,7 @@ static int opera1_xilinx_load_firmware(struct usb_device *dev, } } kfree(p); - if (fw) { - release_firmware(fw); - } + release_firmware(fw); return ret; } diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c index 2e28b973dfd3..3aed0d433921 100644 --- a/drivers/media/dvb/frontends/dib7000p.c +++ b/drivers/media/dvb/frontends/dib7000p.c @@ -260,6 +260,9 @@ static void dib7000p_set_adc_state(struct dib7000p_state *state, enum dibx000_ad // dprintk( "908: %x, 909: %x\n", reg_908, reg_909); + reg_909 |= (state->cfg.disable_sample_and_hold & 1) << 4; + reg_908 |= (state->cfg.enable_current_mirror & 1) << 7; + dib7000p_write_word(state, 908, reg_908); dib7000p_write_word(state, 909, reg_909); } @@ -778,7 +781,10 @@ static void dib7000p_set_channel(struct dib7000p_state *state, struct dvb_fronte default: case GUARD_INTERVAL_1_32: value *= 1; break; } - state->div_sync_wait = (value * 3) / 2 + 32; // add 50% SFN margin + compensate for one DVSY-fifo TODO + if (state->cfg.diversity_delay == 0) + state->div_sync_wait = (value * 3) / 2 + 48; // add 50% SFN margin + compensate for one DVSY-fifo + else + state->div_sync_wait = (value * 3) / 2 + state->cfg.diversity_delay; // add 50% SFN margin + compensate for one DVSY-fifo /* deactive the possibility of diversity reception if extended interleaver */ state->div_force_off = !1 && ch->u.ofdm.transmission_mode != TRANSMISSION_MODE_8K; diff --git a/drivers/media/dvb/frontends/dib7000p.h b/drivers/media/dvb/frontends/dib7000p.h index 805dd13a97ee..da17345bf5bd 100644 --- a/drivers/media/dvb/frontends/dib7000p.h +++ b/drivers/media/dvb/frontends/dib7000p.h @@ -33,6 +33,11 @@ struct dib7000p_config { int (*agc_control) (struct dvb_frontend *, u8 before); u8 output_mode; + u8 disable_sample_and_hold : 1; + + u8 enable_current_mirror : 1; + u8 diversity_delay; + }; #define DEFAULT_DIB7000P_I2C_ADDRESS 18 diff --git a/drivers/media/dvb/siano/smscoreapi.c b/drivers/media/dvb/siano/smscoreapi.c index d93468cd3a85..ff3b0fa901b3 100644 --- a/drivers/media/dvb/siano/smscoreapi.c +++ b/drivers/media/dvb/siano/smscoreapi.c @@ -1098,33 +1098,26 @@ EXPORT_SYMBOL_GPL(smscore_onresponse); * * @return pointer to descriptor on success, NULL on error. */ -struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev) + +struct smscore_buffer_t *get_entry(struct smscore_device_t *coredev) { struct smscore_buffer_t *cb = NULL; unsigned long flags; - DEFINE_WAIT(wait); - spin_lock_irqsave(&coredev->bufferslock, flags); - - /* This function must return a valid buffer, since the buffer list is - * finite, we check that there is an available buffer, if not, we wait - * until such buffer become available. - */ - - prepare_to_wait(&coredev->buffer_mng_waitq, &wait, TASK_INTERRUPTIBLE); - if (list_empty(&coredev->buffers)) { - spin_unlock_irqrestore(&coredev->bufferslock, flags); - schedule(); - spin_lock_irqsave(&coredev->bufferslock, flags); + if (!list_empty(&coredev->buffers)) { + cb = (struct smscore_buffer_t *) coredev->buffers.next; + list_del(&cb->entry); } + spin_unlock_irqrestore(&coredev->bufferslock, flags); + return cb; +} - finish_wait(&coredev->buffer_mng_waitq, &wait); - - cb = (struct smscore_buffer_t *) coredev->buffers.next; - list_del(&cb->entry); +struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev) +{ + struct smscore_buffer_t *cb = NULL; - spin_unlock_irqrestore(&coredev->bufferslock, flags); + wait_event(coredev->buffer_mng_waitq, (cb = get_entry(coredev))); return cb; } diff --git a/drivers/media/radio/si470x/radio-si470x-i2c.c b/drivers/media/radio/si470x/radio-si470x-i2c.c index 67a4ec8768a6..4ce541a5eb47 100644 --- a/drivers/media/radio/si470x/radio-si470x-i2c.c +++ b/drivers/media/radio/si470x/radio-si470x-i2c.c @@ -395,7 +395,7 @@ static int __devinit si470x_i2c_probe(struct i2c_client *client, radio->registers[POWERCFG] = POWERCFG_ENABLE; if (si470x_set_register(radio, POWERCFG) < 0) { retval = -EIO; - goto err_all; + goto err_video; } msleep(110); diff --git a/drivers/media/video/cx231xx/Makefile b/drivers/media/video/cx231xx/Makefile index 755dd0ce65ff..6f2b57384488 100644 --- a/drivers/media/video/cx231xx/Makefile +++ b/drivers/media/video/cx231xx/Makefile @@ -11,4 +11,5 @@ EXTRA_CFLAGS += -Idrivers/media/video EXTRA_CFLAGS += -Idrivers/media/common/tuners EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core EXTRA_CFLAGS += -Idrivers/media/dvb/frontends +EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-usb diff --git a/drivers/media/video/cx231xx/cx231xx-cards.c b/drivers/media/video/cx231xx/cx231xx-cards.c index 6bdc0ef18119..f2a4900014bc 100644 --- a/drivers/media/video/cx231xx/cx231xx-cards.c +++ b/drivers/media/video/cx231xx/cx231xx-cards.c @@ -32,6 +32,7 @@ #include <media/v4l2-chip-ident.h> #include <media/cx25840.h> +#include "dvb-usb-ids.h" #include "xc5000.h" #include "cx231xx.h" @@ -175,6 +176,8 @@ struct usb_device_id cx231xx_id_table[] = { .driver_info = CX231XX_BOARD_CNXT_RDE_250}, {USB_DEVICE(0x0572, 0x58A1), .driver_info = CX231XX_BOARD_CNXT_RDU_250}, + {USB_DEVICE_VER(USB_VID_PIXELVIEW, USB_PID_PIXELVIEW_SBTVD, 0x4000,0x4fff), + .driver_info = CX231XX_BOARD_UNKNOWN}, {}, }; @@ -226,14 +229,16 @@ void cx231xx_pre_card_setup(struct cx231xx *dev) dev->board.name, dev->model); /* set the direction for GPIO pins */ - cx231xx_set_gpio_direction(dev, dev->board.tuner_gpio->bit, 1); - cx231xx_set_gpio_value(dev, dev->board.tuner_gpio->bit, 1); - cx231xx_set_gpio_direction(dev, dev->board.tuner_sif_gpio, 1); + if (dev->board.tuner_gpio) { + cx231xx_set_gpio_direction(dev, dev->board.tuner_gpio->bit, 1); + cx231xx_set_gpio_value(dev, dev->board.tuner_gpio->bit, 1); + cx231xx_set_gpio_direction(dev, dev->board.tuner_sif_gpio, 1); - /* request some modules if any required */ + /* request some modules if any required */ - /* reset the Tuner */ - cx231xx_gpio_set(dev, dev->board.tuner_gpio); + /* reset the Tuner */ + cx231xx_gpio_set(dev, dev->board.tuner_gpio); + } /* set the mode to Analog mode initially */ cx231xx_set_mode(dev, CX231XX_ANALOG_MODE); diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index 86ca8c2359dd..f5a3e74c3c7c 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -1996,7 +1996,7 @@ static int cx25840_probe(struct i2c_client *client, state->volume = v4l2_ctrl_new_std(&state->hdl, &cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_VOLUME, - 0, 65335, 65535 / 100, default_volume); + 0, 65535, 65535 / 100, default_volume); state->mute = v4l2_ctrl_new_std(&state->hdl, &cx25840_audio_ctrl_ops, V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig index 99dbae117591..0fa85cbefbb1 100644 --- a/drivers/media/video/cx88/Kconfig +++ b/drivers/media/video/cx88/Kconfig @@ -17,7 +17,7 @@ config VIDEO_CX88 config VIDEO_CX88_ALSA tristate "Conexant 2388x DMA audio support" - depends on VIDEO_CX88 && SND && EXPERIMENTAL + depends on VIDEO_CX88 && SND select SND_PCM ---help--- This is a video4linux driver for direct (DMA) audio on diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c index b9846106913e..78abc1c1f9d5 100644 --- a/drivers/media/video/gspca/gspca.c +++ b/drivers/media/video/gspca/gspca.c @@ -223,6 +223,7 @@ static int alloc_and_submit_int_urb(struct gspca_dev *gspca_dev, usb_rcvintpipe(dev, ep->bEndpointAddress), buffer, buffer_len, int_irq, (void *)gspca_dev, interval); + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; gspca_dev->int_urb = urb; ret = usb_submit_urb(urb, GFP_KERNEL); if (ret < 0) { diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c index 83a718f0f3f9..9052d5702556 100644 --- a/drivers/media/video/gspca/sn9c20x.c +++ b/drivers/media/video/gspca/sn9c20x.c @@ -2357,8 +2357,7 @@ static void sd_pkt_scan(struct gspca_dev *gspca_dev, (data[33] << 10); avg_lum >>= 9; atomic_set(&sd->avg_lum, avg_lum); - gspca_frame_add(gspca_dev, LAST_PACKET, - data, len); + gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0); return; } if (gspca_dev->last_packet_type == LAST_PACKET) { diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c index be03a712731c..f0316d02f09f 100644 --- a/drivers/media/video/ivtv/ivtvfb.c +++ b/drivers/media/video/ivtv/ivtvfb.c @@ -466,6 +466,8 @@ static int ivtvfb_ioctl(struct fb_info *info, unsigned int cmd, unsigned long ar struct fb_vblank vblank; u32 trace; + memset(&vblank, 0, sizeof(struct fb_vblank)); + vblank.flags = FB_VBLANK_HAVE_COUNT |FB_VBLANK_HAVE_VCOUNT | FB_VBLANK_HAVE_VSYNC; trace = read_reg(IVTV_REG_DEC_LINE_FIELD) >> 16; diff --git a/drivers/media/video/mem2mem_testdev.c b/drivers/media/video/mem2mem_testdev.c index 4525335f9bd4..a7210d981388 100644 --- a/drivers/media/video/mem2mem_testdev.c +++ b/drivers/media/video/mem2mem_testdev.c @@ -239,7 +239,7 @@ static int device_process(struct m2mtest_ctx *ctx, return -EFAULT; } - if (in_buf->vb.size < out_buf->vb.size) { + if (in_buf->vb.size > out_buf->vb.size) { v4l2_err(&dev->v4l2_dev, "Output buffer is too small\n"); return -EINVAL; } @@ -1014,6 +1014,7 @@ static int m2mtest_remove(struct platform_device *pdev) v4l2_m2m_release(dev->m2m_dev); del_timer_sync(&dev->timer); video_unregister_device(dev->vfd); + video_device_release(dev->vfd); v4l2_device_unregister(&dev->v4l2_dev); kfree(dev); diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c index 758a4db27d65..c71af4e0e517 100644 --- a/drivers/media/video/mt9m111.c +++ b/drivers/media/video/mt9m111.c @@ -447,6 +447,9 @@ static int mt9m111_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) dev_dbg(&client->dev, "%s left=%d, top=%d, width=%d, height=%d\n", __func__, rect.left, rect.top, rect.width, rect.height); + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + ret = mt9m111_make_rect(client, &rect); if (!ret) mt9m111->rect = rect; @@ -466,12 +469,14 @@ static int mt9m111_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) static int mt9m111_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a) { + if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + a->bounds.left = MT9M111_MIN_DARK_COLS; a->bounds.top = MT9M111_MIN_DARK_ROWS; a->bounds.width = MT9M111_MAX_WIDTH; a->bounds.height = MT9M111_MAX_HEIGHT; a->defrect = a->bounds; - a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; a->pixelaspect.numerator = 1; a->pixelaspect.denominator = 1; @@ -487,6 +492,7 @@ static int mt9m111_g_fmt(struct v4l2_subdev *sd, mf->width = mt9m111->rect.width; mf->height = mt9m111->rect.height; mf->code = mt9m111->fmt->code; + mf->colorspace = mt9m111->fmt->colorspace; mf->field = V4L2_FIELD_NONE; return 0; diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c index e7cd23cd6394..b48473c7896b 100644 --- a/drivers/media/video/mt9v022.c +++ b/drivers/media/video/mt9v022.c @@ -402,9 +402,6 @@ static int mt9v022_s_fmt(struct v4l2_subdev *sd, if (mt9v022->model != V4L2_IDENT_MT9V022IX7ATC) return -EINVAL; break; - case 0: - /* No format change, only geometry */ - break; default: return -EINVAL; } diff --git a/drivers/media/video/mx2_camera.c b/drivers/media/video/mx2_camera.c index 66ff174151b5..b6ea67221d1d 100644 --- a/drivers/media/video/mx2_camera.c +++ b/drivers/media/video/mx2_camera.c @@ -378,6 +378,9 @@ static void mx25_camera_frame_done(struct mx2_camera_dev *pcdev, int fb, spin_lock_irqsave(&pcdev->lock, flags); + if (*fb_active == NULL) + goto out; + vb = &(*fb_active)->vb; dev_dbg(pcdev->dev, "%s (vb=0x%p) 0x%08lx %d\n", __func__, vb, vb->baddr, vb->bsize); @@ -402,6 +405,7 @@ static void mx25_camera_frame_done(struct mx2_camera_dev *pcdev, int fb, *fb_active = buf; +out: spin_unlock_irqrestore(&pcdev->lock, flags); } diff --git a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c b/drivers/media/video/pvrusb2/pvrusb2-ctrl.c index 1b992b847198..55ea914c7fcd 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-ctrl.c +++ b/drivers/media/video/pvrusb2/pvrusb2-ctrl.c @@ -513,7 +513,7 @@ int pvr2_ctrl_sym_to_value(struct pvr2_ctrl *cptr, if (ret >= 0) { ret = pvr2_ctrl_range_check(cptr,*valptr); } - if (maskptr) *maskptr = ~0; + *maskptr = ~0; } else if (cptr->info->type == pvr2_ctl_bool) { ret = parse_token(ptr,len,valptr,boolNames, ARRAY_SIZE(boolNames)); @@ -522,7 +522,7 @@ int pvr2_ctrl_sym_to_value(struct pvr2_ctrl *cptr, } else if (ret == 0) { *valptr = (*valptr & 1) ? !0 : 0; } - if (maskptr) *maskptr = 1; + *maskptr = 1; } else if (cptr->info->type == pvr2_ctl_enum) { ret = parse_token( ptr,len,valptr, @@ -531,7 +531,7 @@ int pvr2_ctrl_sym_to_value(struct pvr2_ctrl *cptr, if (ret >= 0) { ret = pvr2_ctrl_range_check(cptr,*valptr); } - if (maskptr) *maskptr = ~0; + *maskptr = ~0; } else if (cptr->info->type == pvr2_ctl_bitmask) { ret = parse_tlist( ptr,len,maskptr,valptr, diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c index b151c7be8a50..6961c55baf9b 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.c +++ b/drivers/media/video/s5p-fimc/fimc-core.c @@ -393,6 +393,37 @@ static void fimc_set_yuv_order(struct fimc_ctx *ctx) dbg("ctx->out_order_1p= %d", ctx->out_order_1p); } +static void fimc_prepare_dma_offset(struct fimc_ctx *ctx, struct fimc_frame *f) +{ + struct samsung_fimc_variant *variant = ctx->fimc_dev->variant; + + f->dma_offset.y_h = f->offs_h; + if (!variant->pix_hoff) + f->dma_offset.y_h *= (f->fmt->depth >> 3); + + f->dma_offset.y_v = f->offs_v; + + f->dma_offset.cb_h = f->offs_h; + f->dma_offset.cb_v = f->offs_v; + + f->dma_offset.cr_h = f->offs_h; + f->dma_offset.cr_v = f->offs_v; + + if (!variant->pix_hoff) { + if (f->fmt->planes_cnt == 3) { + f->dma_offset.cb_h >>= 1; + f->dma_offset.cr_h >>= 1; + } + if (f->fmt->color == S5P_FIMC_YCBCR420) { + f->dma_offset.cb_v >>= 1; + f->dma_offset.cr_v >>= 1; + } + } + + dbg("in_offset: color= %d, y_h= %d, y_v= %d", + f->fmt->color, f->dma_offset.y_h, f->dma_offset.y_v); +} + /** * fimc_prepare_config - check dimensions, operation and color mode * and pre-calculate offset and the scaling coefficients. @@ -406,7 +437,6 @@ static int fimc_prepare_config(struct fimc_ctx *ctx, u32 flags) { struct fimc_frame *s_frame, *d_frame; struct fimc_vid_buffer *buf = NULL; - struct samsung_fimc_variant *variant = ctx->fimc_dev->variant; int ret = 0; s_frame = &ctx->s_frame; @@ -419,61 +449,16 @@ static int fimc_prepare_config(struct fimc_ctx *ctx, u32 flags) swap(d_frame->width, d_frame->height); } - /* Prepare the output offset ratios for scaler. */ - d_frame->dma_offset.y_h = d_frame->offs_h; - if (!variant->pix_hoff) - d_frame->dma_offset.y_h *= (d_frame->fmt->depth >> 3); - - d_frame->dma_offset.y_v = d_frame->offs_v; - - d_frame->dma_offset.cb_h = d_frame->offs_h; - d_frame->dma_offset.cb_v = d_frame->offs_v; - - d_frame->dma_offset.cr_h = d_frame->offs_h; - d_frame->dma_offset.cr_v = d_frame->offs_v; + /* Prepare the DMA offset ratios for scaler. */ + fimc_prepare_dma_offset(ctx, &ctx->s_frame); + fimc_prepare_dma_offset(ctx, &ctx->d_frame); - if (!variant->pix_hoff && d_frame->fmt->planes_cnt == 3) { - d_frame->dma_offset.cb_h >>= 1; - d_frame->dma_offset.cb_v >>= 1; - d_frame->dma_offset.cr_h >>= 1; - d_frame->dma_offset.cr_v >>= 1; - } - - dbg("out offset: color= %d, y_h= %d, y_v= %d", - d_frame->fmt->color, - d_frame->dma_offset.y_h, d_frame->dma_offset.y_v); - - /* Prepare the input offset ratios for scaler. */ - s_frame->dma_offset.y_h = s_frame->offs_h; - if (!variant->pix_hoff) - s_frame->dma_offset.y_h *= (s_frame->fmt->depth >> 3); - s_frame->dma_offset.y_v = s_frame->offs_v; - - s_frame->dma_offset.cb_h = s_frame->offs_h; - s_frame->dma_offset.cb_v = s_frame->offs_v; - - s_frame->dma_offset.cr_h = s_frame->offs_h; - s_frame->dma_offset.cr_v = s_frame->offs_v; - - if (!variant->pix_hoff && s_frame->fmt->planes_cnt == 3) { - s_frame->dma_offset.cb_h >>= 1; - s_frame->dma_offset.cb_v >>= 1; - s_frame->dma_offset.cr_h >>= 1; - s_frame->dma_offset.cr_v >>= 1; - } - - dbg("in offset: color= %d, y_h= %d, y_v= %d", - s_frame->fmt->color, s_frame->dma_offset.y_h, - s_frame->dma_offset.y_v); - - fimc_set_yuv_order(ctx); - - /* Check against the scaler ratio. */ if (s_frame->height > (SCALER_MAX_VRATIO * d_frame->height) || s_frame->width > (SCALER_MAX_HRATIO * d_frame->width)) { err("out of scaler range"); return -EINVAL; } + fimc_set_yuv_order(ctx); } /* Input DMA mode is not allowed when the scaler is disabled. */ @@ -822,7 +807,8 @@ static int fimc_m2m_s_fmt(struct file *file, void *priv, struct v4l2_format *f) } else { v4l2_err(&ctx->fimc_dev->m2m.v4l2_dev, "Wrong buffer/video queue type (%d)\n", f->type); - return -EINVAL; + ret = -EINVAL; + goto s_fmt_out; } pix = &f->fmt.pix; @@ -1414,8 +1400,10 @@ static int fimc_probe(struct platform_device *pdev) } fimc->work_queue = create_workqueue(dev_name(&fimc->pdev->dev)); - if (!fimc->work_queue) + if (!fimc->work_queue) { + ret = -ENOMEM; goto err_irq; + } ret = fimc_register_m2m_device(fimc); if (ret) @@ -1492,6 +1480,7 @@ static struct samsung_fimc_variant fimc2_variant_s5p = { }; static struct samsung_fimc_variant fimc01_variant_s5pv210 = { + .pix_hoff = 1, .has_inp_rot = 1, .has_out_rot = 1, .min_inp_pixsize = 16, @@ -1506,6 +1495,7 @@ static struct samsung_fimc_variant fimc01_variant_s5pv210 = { }; static struct samsung_fimc_variant fimc2_variant_s5pv210 = { + .pix_hoff = 1, .min_inp_pixsize = 16, .min_out_pixsize = 32, diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index ec697fcd406e..bb8d83d8ddaf 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -4323,13 +4323,13 @@ struct saa7134_board saa7134_boards[] = { }, [SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM] = { /* Beholder Intl. Ltd. 2008 */ - /*Dmitry Belimov <d.belimov@gmail.com> */ - .name = "Beholder BeholdTV Columbus TVFM", + /* Dmitry Belimov <d.belimov@gmail.com> */ + .name = "Beholder BeholdTV Columbus TV/FM", .audio_clock = 0x00187de7, .tuner_type = TUNER_ALPS_TSBE5_PAL, - .radio_type = UNSET, - .tuner_addr = ADDR_UNSET, - .radio_addr = ADDR_UNSET, + .radio_type = TUNER_TEA5767, + .tuner_addr = 0xc2 >> 1, + .radio_addr = 0xc0 >> 1, .tda9887_conf = TDA9887_PRESENT, .gpiomask = 0x000A8004, .inputs = {{ diff --git a/drivers/media/video/saa7164/saa7164-buffer.c b/drivers/media/video/saa7164/saa7164-buffer.c index 5713f3a4b76c..ddd25d32723d 100644 --- a/drivers/media/video/saa7164/saa7164-buffer.c +++ b/drivers/media/video/saa7164/saa7164-buffer.c @@ -136,10 +136,11 @@ ret: int saa7164_buffer_dealloc(struct saa7164_tsport *port, struct saa7164_buffer *buf) { - struct saa7164_dev *dev = port->dev; + struct saa7164_dev *dev; - if ((buf == 0) || (port == 0)) + if (!buf || !port) return SAA_ERR_BAD_PARAMETER; + dev = port->dev; dprintk(DBGLVL_BUF, "%s() deallocating buffer @ 0x%p\n", __func__, buf); diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index 8bdd940f32e6..2ac85d8984f0 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -486,6 +486,12 @@ static int uvc_parse_format(struct uvc_device *dev, max(frame->dwFrameInterval[0], frame->dwDefaultFrameInterval)); + if (dev->quirks & UVC_QUIRK_RESTRICT_FRAME_RATE) { + frame->bFrameIntervalType = 1; + frame->dwFrameInterval[0] = + frame->dwDefaultFrameInterval; + } + uvc_trace(UVC_TRACE_DESCR, "- %ux%u (%u.%u fps)\n", frame->wWidth, frame->wHeight, 10000000/frame->dwDefaultFrameInterval, @@ -2026,6 +2032,15 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceClass = USB_CLASS_VENDOR_SPEC, .bInterfaceSubClass = 1, .bInterfaceProtocol = 0 }, + /* Chicony CNF7129 (Asus EEE 100HE) */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x04f2, + .idProduct = 0xb071, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_RESTRICT_FRAME_RATE }, /* Alcor Micro AU3820 (Future Boy PC USB Webcam) */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, @@ -2091,6 +2106,15 @@ static struct usb_device_id uvc_ids[] = { .bInterfaceProtocol = 0, .driver_info = UVC_QUIRK_PROBE_MINMAX | UVC_QUIRK_PROBE_DEF }, + /* IMC Networks (Medion Akoya) */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x13d3, + .idProduct = 0x5103, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_STREAM_NO_FID }, /* Syntek (HP Spartan) */ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO, diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h index bdacf3beabf5..892e0e51916c 100644 --- a/drivers/media/video/uvc/uvcvideo.h +++ b/drivers/media/video/uvc/uvcvideo.h @@ -182,6 +182,7 @@ struct uvc_xu_control { #define UVC_QUIRK_IGNORE_SELECTOR_UNIT 0x00000020 #define UVC_QUIRK_FIX_BANDWIDTH 0x00000080 #define UVC_QUIRK_PROBE_DEF 0x00000100 +#define UVC_QUIRK_RESTRICT_FRAME_RATE 0x00000200 /* Format flags */ #define UVC_FMT_FLAG_COMPRESSED 0x00000001 diff --git a/drivers/media/video/videobuf-dma-contig.c b/drivers/media/video/videobuf-dma-contig.c index 372b87efcd05..6ff9e4bac3ea 100644 --- a/drivers/media/video/videobuf-dma-contig.c +++ b/drivers/media/video/videobuf-dma-contig.c @@ -393,8 +393,10 @@ void videobuf_dma_contig_free(struct videobuf_queue *q, } /* read() method */ - dma_free_coherent(q->dev, mem->size, mem->vaddr, mem->dma_handle); - mem->vaddr = NULL; + if (mem->vaddr) { + dma_free_coherent(q->dev, mem->size, mem->vaddr, mem->dma_handle); + mem->vaddr = NULL; + } } EXPORT_SYMBOL_GPL(videobuf_dma_contig_free); diff --git a/drivers/media/video/videobuf-dma-sg.c b/drivers/media/video/videobuf-dma-sg.c index 06f9a9c2a39a..2ad0bc252b0e 100644 --- a/drivers/media/video/videobuf-dma-sg.c +++ b/drivers/media/video/videobuf-dma-sg.c @@ -94,7 +94,7 @@ err: * must free the memory. */ static struct scatterlist *videobuf_pages_to_sg(struct page **pages, - int nr_pages, int offset) + int nr_pages, int offset, size_t size) { struct scatterlist *sglist; int i; @@ -110,12 +110,14 @@ static struct scatterlist *videobuf_pages_to_sg(struct page **pages, /* DMA to highmem pages might not work */ goto highmem; sg_set_page(&sglist[0], pages[0], PAGE_SIZE - offset, offset); + size -= PAGE_SIZE - offset; for (i = 1; i < nr_pages; i++) { if (NULL == pages[i]) goto nopage; if (PageHighMem(pages[i])) goto highmem; - sg_set_page(&sglist[i], pages[i], PAGE_SIZE, 0); + sg_set_page(&sglist[i], pages[i], min(PAGE_SIZE, size), 0); + size -= min(PAGE_SIZE, size); } return sglist; @@ -170,7 +172,8 @@ static int videobuf_dma_init_user_locked(struct videobuf_dmabuf *dma, first = (data & PAGE_MASK) >> PAGE_SHIFT; last = ((data+size-1) & PAGE_MASK) >> PAGE_SHIFT; - dma->offset = data & ~PAGE_MASK; + dma->offset = data & ~PAGE_MASK; + dma->size = size; dma->nr_pages = last-first+1; dma->pages = kmalloc(dma->nr_pages * sizeof(struct page *), GFP_KERNEL); if (NULL == dma->pages) @@ -252,7 +255,7 @@ int videobuf_dma_map(struct device *dev, struct videobuf_dmabuf *dma) if (dma->pages) { dma->sglist = videobuf_pages_to_sg(dma->pages, dma->nr_pages, - dma->offset); + dma->offset, dma->size); } if (dma->vaddr) { dma->sglist = videobuf_vmalloc_to_sg(dma->vaddr, diff --git a/drivers/misc/bh1780gli.c b/drivers/misc/bh1780gli.c index 714c6b487313..d5f3a3fd2319 100644 --- a/drivers/misc/bh1780gli.c +++ b/drivers/misc/bh1780gli.c @@ -190,7 +190,6 @@ static int __devexit bh1780_remove(struct i2c_client *client) ddata = i2c_get_clientdata(client); sysfs_remove_group(&client->dev.kobj, &bh1780_attr_group); - i2c_set_clientdata(client, NULL); kfree(ddata); return 0; diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 2cc81a54cbf3..5db667c0b371 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2428,7 +2428,7 @@ config UGETH_TX_ON_DEMAND config MV643XX_ETH tristate "Marvell Discovery (643XX) and Orion ethernet support" - depends on MV64X60 || PPC32 || PLAT_ORION + depends on (MV64X60 || PPC32 || PLAT_ORION) && INET select INET_LRO select PHYLIB help @@ -2803,7 +2803,7 @@ config NIU config PASEMI_MAC tristate "PA Semi 1/10Gbit MAC" - depends on PPC_PASEMI && PCI + depends on PPC_PASEMI && PCI && INET select PHYLIB select INET_LRO help diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 3b16f62d5606..e953c6ad6e6d 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -5164,6 +5164,15 @@ int bond_create(struct net *net, const char *name) res = dev_alloc_name(bond_dev, "bond%d"); if (res < 0) goto out; + } else { + /* + * If we're given a name to register + * we need to ensure that its not already + * registered + */ + res = -EEXIST; + if (__dev_get_by_name(net, name) != NULL) + goto out; } res = register_netdevice(bond_dev); diff --git a/drivers/net/skge.c b/drivers/net/skge.c index 40e5c46e7571..465ae7e84507 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -43,6 +43,7 @@ #include <linux/seq_file.h> #include <linux/mii.h> #include <linux/slab.h> +#include <linux/dmi.h> #include <asm/irq.h> #include "skge.h" @@ -3868,6 +3869,8 @@ static void __devinit skge_show_addr(struct net_device *dev) netif_info(skge, probe, skge->netdev, "addr %pM\n", dev->dev_addr); } +static int only_32bit_dma; + static int __devinit skge_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -3889,7 +3892,7 @@ static int __devinit skge_probe(struct pci_dev *pdev, pci_set_master(pdev); - if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { + if (!only_32bit_dma && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { using_dac = 1; err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); } else if (!(err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))) { @@ -4147,8 +4150,21 @@ static struct pci_driver skge_driver = { .shutdown = skge_shutdown, }; +static struct dmi_system_id skge_32bit_dma_boards[] = { + { + .ident = "Gigabyte nForce boards", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co"), + DMI_MATCH(DMI_BOARD_NAME, "nForce"), + }, + }, + {} +}; + static int __init skge_init_module(void) { + if (dmi_check_system(skge_32bit_dma_boards)) + only_32bit_dma = 1; skge_debug_init(); return pci_register_driver(&skge_driver); } diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c index cc648b6ae31c..a3d95cca8f0c 100644 --- a/drivers/net/wireless/ath/ath9k/ani.c +++ b/drivers/net/wireless/ath/ath9k/ani.c @@ -543,7 +543,7 @@ static u8 ath9k_hw_chan_2_clockrate_mhz(struct ath_hw *ah) if (conf_is_ht40(conf)) return clockrate * 2; - return clockrate * 2; + return clockrate; } static int32_t ath9k_hw_ani_get_listen_time(struct ath_hw *ah) diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c index 9024480a8228..c44a5e8b8b82 100644 --- a/drivers/platform/x86/intel_ips.c +++ b/drivers/platform/x86/intel_ips.c @@ -51,7 +51,6 @@ * TODO: * - handle CPU hotplug * - provide turbo enable/disable api - * - make sure we can write turbo enable/disable reg based on MISC_EN * * Related documents: * - CDI 403777, 403778 - Auburndale EDS vol 1 & 2 @@ -230,7 +229,7 @@ #define THM_TC2 0xac #define THM_DTV 0xb0 #define THM_ITV 0xd8 -#define ITV_ME_SEQNO_MASK 0x000f0000 /* ME should update every ~200ms */ +#define ITV_ME_SEQNO_MASK 0x00ff0000 /* ME should update every ~200ms */ #define ITV_ME_SEQNO_SHIFT (16) #define ITV_MCH_TEMP_MASK 0x0000ff00 #define ITV_MCH_TEMP_SHIFT (8) @@ -325,6 +324,7 @@ struct ips_driver { bool gpu_preferred; bool poll_turbo_status; bool second_cpu; + bool turbo_toggle_allowed; struct ips_mcp_limits *limits; /* Optional MCH interfaces for if i915 is in use */ @@ -415,7 +415,7 @@ static void ips_cpu_lower(struct ips_driver *ips) new_limit = cur_limit - 8; /* 1W decrease */ /* Clamp to SKU TDP limit */ - if (((new_limit * 10) / 8) < (ips->orig_turbo_limit & TURBO_TDP_MASK)) + if (new_limit < (ips->orig_turbo_limit & TURBO_TDP_MASK)) new_limit = ips->orig_turbo_limit & TURBO_TDP_MASK; thm_writew(THM_MPCPC, (new_limit * 10) / 8); @@ -461,7 +461,8 @@ static void ips_enable_cpu_turbo(struct ips_driver *ips) if (ips->__cpu_turbo_on) return; - on_each_cpu(do_enable_cpu_turbo, ips, 1); + if (ips->turbo_toggle_allowed) + on_each_cpu(do_enable_cpu_turbo, ips, 1); ips->__cpu_turbo_on = true; } @@ -498,7 +499,8 @@ static void ips_disable_cpu_turbo(struct ips_driver *ips) if (!ips->__cpu_turbo_on) return; - on_each_cpu(do_disable_cpu_turbo, ips, 1); + if (ips->turbo_toggle_allowed) + on_each_cpu(do_disable_cpu_turbo, ips, 1); ips->__cpu_turbo_on = false; } @@ -598,17 +600,29 @@ static bool mcp_exceeded(struct ips_driver *ips) { unsigned long flags; bool ret = false; + u32 temp_limit; + u32 avg_power; + const char *msg = "MCP limit exceeded: "; spin_lock_irqsave(&ips->turbo_status_lock, flags); - if (ips->mcp_avg_temp > (ips->mcp_temp_limit * 100)) - ret = true; - if (ips->cpu_avg_power + ips->mch_avg_power > ips->mcp_power_limit) + + temp_limit = ips->mcp_temp_limit * 100; + if (ips->mcp_avg_temp > temp_limit) { + dev_info(&ips->dev->dev, + "%sAvg temp %u, limit %u\n", msg, ips->mcp_avg_temp, + temp_limit); ret = true; - spin_unlock_irqrestore(&ips->turbo_status_lock, flags); + } - if (ret) + avg_power = ips->cpu_avg_power + ips->mch_avg_power; + if (avg_power > ips->mcp_power_limit) { dev_info(&ips->dev->dev, - "MCP power or thermal limit exceeded\n"); + "%sAvg power %u, limit %u\n", msg, avg_power, + ips->mcp_power_limit); + ret = true; + } + + spin_unlock_irqrestore(&ips->turbo_status_lock, flags); return ret; } @@ -663,6 +677,27 @@ static bool mch_exceeded(struct ips_driver *ips) } /** + * verify_limits - verify BIOS provided limits + * @ips: IPS structure + * + * BIOS can optionally provide non-default limits for power and temp. Check + * them here and use the defaults if the BIOS values are not provided or + * are otherwise unusable. + */ +static void verify_limits(struct ips_driver *ips) +{ + if (ips->mcp_power_limit < ips->limits->mcp_power_limit || + ips->mcp_power_limit > 35000) + ips->mcp_power_limit = ips->limits->mcp_power_limit; + + if (ips->mcp_temp_limit < ips->limits->core_temp_limit || + ips->mcp_temp_limit < ips->limits->mch_temp_limit || + ips->mcp_temp_limit > 150) + ips->mcp_temp_limit = min(ips->limits->core_temp_limit, + ips->limits->mch_temp_limit); +} + +/** * update_turbo_limits - get various limits & settings from regs * @ips: IPS driver struct * @@ -680,12 +715,21 @@ static void update_turbo_limits(struct ips_driver *ips) u32 hts = thm_readl(THM_HTS); ips->cpu_turbo_enabled = !(hts & HTS_PCTD_DIS); - ips->gpu_turbo_enabled = !(hts & HTS_GTD_DIS); + /* + * Disable turbo for now, until we can figure out why the power figures + * are wrong + */ + ips->cpu_turbo_enabled = false; + + if (ips->gpu_busy) + ips->gpu_turbo_enabled = !(hts & HTS_GTD_DIS); + ips->core_power_limit = thm_readw(THM_MPCPC); ips->mch_power_limit = thm_readw(THM_MMGPC); ips->mcp_temp_limit = thm_readw(THM_PTL); ips->mcp_power_limit = thm_readw(THM_MPPC); + verify_limits(ips); /* Ignore BIOS CPU vs GPU pref */ } @@ -858,7 +902,7 @@ static u32 get_cpu_power(struct ips_driver *ips, u32 *last, int period) ret = (ret * 1000) / 65535; *last = val; - return ret; + return 0; } static const u16 temp_decay_factor = 2; @@ -940,7 +984,6 @@ static int ips_monitor(void *data) kfree(mch_samples); kfree(cpu_samples); kfree(mchp_samples); - kthread_stop(ips->adjust); return -ENOMEM; } @@ -948,7 +991,7 @@ static int ips_monitor(void *data) ITV_ME_SEQNO_SHIFT; seqno_timestamp = get_jiffies_64(); - old_cpu_power = thm_readl(THM_CEC) / 65535; + old_cpu_power = thm_readl(THM_CEC); schedule_timeout_interruptible(msecs_to_jiffies(IPS_SAMPLE_PERIOD)); /* Collect an initial average */ @@ -1150,11 +1193,18 @@ static irqreturn_t ips_irq_handler(int irq, void *arg) STS_GPL_SHIFT; /* ignore EC CPU vs GPU pref */ ips->cpu_turbo_enabled = !(sts & STS_PCTD_DIS); - ips->gpu_turbo_enabled = !(sts & STS_GTD_DIS); + /* + * Disable turbo for now, until we can figure + * out why the power figures are wrong + */ + ips->cpu_turbo_enabled = false; + if (ips->gpu_busy) + ips->gpu_turbo_enabled = !(sts & STS_GTD_DIS); ips->mcp_temp_limit = (sts & STS_PTL_MASK) >> STS_PTL_SHIFT; ips->mcp_power_limit = (tc1 & STS_PPL_MASK) >> STS_PPL_SHIFT; + verify_limits(ips); spin_unlock(&ips->turbo_status_lock); thm_writeb(THM_SEC, SEC_ACK); @@ -1333,8 +1383,10 @@ static struct ips_mcp_limits *ips_detect_cpu(struct ips_driver *ips) * turbo manually or we'll get an illegal MSR access, even though * turbo will still be available. */ - if (!(misc_en & IA32_MISC_TURBO_EN)) - ; /* add turbo MSR write allowed flag if necessary */ + if (misc_en & IA32_MISC_TURBO_EN) + ips->turbo_toggle_allowed = true; + else + ips->turbo_toggle_allowed = false; if (strstr(boot_cpu_data.x86_model_id, "CPU M")) limits = &ips_sv_limits; @@ -1351,9 +1403,10 @@ static struct ips_mcp_limits *ips_detect_cpu(struct ips_driver *ips) tdp = turbo_power & TURBO_TDP_MASK; /* Sanity check TDP against CPU */ - if (limits->mcp_power_limit != (tdp / 8) * 1000) { - dev_warn(&ips->dev->dev, "Warning: CPU TDP doesn't match expected value (found %d, expected %d)\n", - tdp / 8, limits->mcp_power_limit / 1000); + if (limits->core_power_limit != (tdp / 8) * 1000) { + dev_info(&ips->dev->dev, "CPU TDP doesn't match expected value (found %d, expected %d)\n", + tdp / 8, limits->core_power_limit / 1000); + limits->core_power_limit = (tdp / 8) * 1000; } out: @@ -1390,7 +1443,7 @@ static bool ips_get_i915_syms(struct ips_driver *ips) return true; out_put_busy: - symbol_put(i915_gpu_turbo_disable); + symbol_put(i915_gpu_busy); out_put_lower: symbol_put(i915_gpu_lower); out_put_raise: @@ -1532,22 +1585,27 @@ static int ips_probe(struct pci_dev *dev, const struct pci_device_id *id) /* Save turbo limits & ratios */ rdmsrl(TURBO_POWER_CURRENT_LIMIT, ips->orig_turbo_limit); - ips_enable_cpu_turbo(ips); - ips->cpu_turbo_enabled = true; + ips_disable_cpu_turbo(ips); + ips->cpu_turbo_enabled = false; - /* Set up the work queue and monitor/adjust threads */ - ips->monitor = kthread_run(ips_monitor, ips, "ips-monitor"); - if (IS_ERR(ips->monitor)) { + /* Create thermal adjust thread */ + ips->adjust = kthread_create(ips_adjust, ips, "ips-adjust"); + if (IS_ERR(ips->adjust)) { dev_err(&dev->dev, - "failed to create thermal monitor thread, aborting\n"); + "failed to create thermal adjust thread, aborting\n"); ret = -ENOMEM; goto error_free_irq; + } - ips->adjust = kthread_create(ips_adjust, ips, "ips-adjust"); - if (IS_ERR(ips->adjust)) { + /* + * Set up the work queue and monitor thread. The monitor thread + * will wake up ips_adjust thread. + */ + ips->monitor = kthread_run(ips_monitor, ips, "ips-monitor"); + if (IS_ERR(ips->monitor)) { dev_err(&dev->dev, - "failed to create thermal adjust thread, aborting\n"); + "failed to create thermal monitor thread, aborting\n"); ret = -ENOMEM; goto error_thread_cleanup; } @@ -1566,7 +1624,7 @@ static int ips_probe(struct pci_dev *dev, const struct pci_device_id *id) return ret; error_thread_cleanup: - kthread_stop(ips->monitor); + kthread_stop(ips->adjust); error_free_irq: free_irq(ips->dev->irq, ips); error_unmap: diff --git a/drivers/regulator/ad5398.c b/drivers/regulator/ad5398.c index df1fb53c09d2..a4be41614eeb 100644 --- a/drivers/regulator/ad5398.c +++ b/drivers/regulator/ad5398.c @@ -256,7 +256,6 @@ static int __devexit ad5398_remove(struct i2c_client *client) regulator_unregister(chip->rdev); kfree(chip); - i2c_set_clientdata(client, NULL); return 0; } diff --git a/drivers/regulator/isl6271a-regulator.c b/drivers/regulator/isl6271a-regulator.c index d61ecb885a8c..b8cc6389a541 100644 --- a/drivers/regulator/isl6271a-regulator.c +++ b/drivers/regulator/isl6271a-regulator.c @@ -191,8 +191,6 @@ static int __devexit isl6271a_remove(struct i2c_client *i2c) struct isl_pmic *pmic = i2c_get_clientdata(i2c); int i; - i2c_set_clientdata(i2c, NULL); - for (i = 0; i < 3; i++) regulator_unregister(pmic->rdev[i]); diff --git a/drivers/rtc/rtc-ds3232.c b/drivers/rtc/rtc-ds3232.c index 9daed8db83d3..9de8516e3531 100644 --- a/drivers/rtc/rtc-ds3232.c +++ b/drivers/rtc/rtc-ds3232.c @@ -268,7 +268,6 @@ out_irq: free_irq(client->irq, client); out_free: - i2c_set_clientdata(client, NULL); kfree(ds3232); return ret; } @@ -287,7 +286,6 @@ static int __devexit ds3232_remove(struct i2c_client *client) } rtc_device_unregister(ds3232->rtc); - i2c_set_clientdata(client, NULL); kfree(ds3232); return 0; } diff --git a/drivers/staging/tm6000/Kconfig b/drivers/staging/tm6000/Kconfig index c725356cc346..de7ebb99d8f6 100644 --- a/drivers/staging/tm6000/Kconfig +++ b/drivers/staging/tm6000/Kconfig @@ -1,6 +1,6 @@ config VIDEO_TM6000 tristate "TV Master TM5600/6000/6010 driver" - depends on VIDEO_DEV && I2C && INPUT && USB && EXPERIMENTAL + depends on VIDEO_DEV && I2C && INPUT && IR_CORE && USB && EXPERIMENTAL select VIDEO_TUNER select MEDIA_TUNER_XC2028 select MEDIA_TUNER_XC5000 diff --git a/drivers/staging/tm6000/tm6000-input.c b/drivers/staging/tm6000/tm6000-input.c index 32f7a0af6938..54f7667cc706 100644 --- a/drivers/staging/tm6000/tm6000-input.c +++ b/drivers/staging/tm6000/tm6000-input.c @@ -46,7 +46,7 @@ MODULE_PARM_DESC(enable_ir, "enable ir (default is enable"); } struct tm6000_ir_poll_result { - u8 rc_data[4]; + u16 rc_data; }; struct tm6000_IR { @@ -60,9 +60,9 @@ struct tm6000_IR { int polling; struct delayed_work work; u8 wait:1; + u8 key:1; struct urb *int_urb; u8 *urb_data; - u8 key:1; int (*get_key) (struct tm6000_IR *, struct tm6000_ir_poll_result *); @@ -122,13 +122,14 @@ static void tm6000_ir_urb_received(struct urb *urb) if (urb->status != 0) printk(KERN_INFO "not ready\n"); - else if (urb->actual_length > 0) + else if (urb->actual_length > 0) { memcpy(ir->urb_data, urb->transfer_buffer, urb->actual_length); - dprintk("data %02x %02x %02x %02x\n", ir->urb_data[0], - ir->urb_data[1], ir->urb_data[2], ir->urb_data[3]); + dprintk("data %02x %02x %02x %02x\n", ir->urb_data[0], + ir->urb_data[1], ir->urb_data[2], ir->urb_data[3]); - ir->key = 1; + ir->key = 1; + } rc = usb_submit_urb(urb, GFP_ATOMIC); } @@ -140,30 +141,47 @@ static int default_polling_getkey(struct tm6000_IR *ir, int rc; u8 buf[2]; - if (ir->wait && !&dev->int_in) { - poll_result->rc_data[0] = 0xff; + if (ir->wait && !&dev->int_in) return 0; - } if (&dev->int_in) { - poll_result->rc_data[0] = ir->urb_data[0]; - poll_result->rc_data[1] = ir->urb_data[1]; + if (ir->ir.ir_type == IR_TYPE_RC5) + poll_result->rc_data = ir->urb_data[0]; + else + poll_result->rc_data = ir->urb_data[0] | ir->urb_data[1] << 8; } else { tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0); msleep(10); tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 1); msleep(10); - rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR | - USB_RECIP_DEVICE, REQ_02_GET_IR_CODE, 0, 0, buf, 1); + if (ir->ir.ir_type == IR_TYPE_RC5) { + rc = tm6000_read_write_usb(dev, USB_DIR_IN | + USB_TYPE_VENDOR | USB_RECIP_DEVICE, + REQ_02_GET_IR_CODE, 0, 0, buf, 1); - msleep(10); + msleep(10); - dprintk("read data=%02x\n", buf[0]); - if (rc < 0) - return rc; + dprintk("read data=%02x\n", buf[0]); + if (rc < 0) + return rc; - poll_result->rc_data[0] = buf[0]; + poll_result->rc_data = buf[0]; + } else { + rc = tm6000_read_write_usb(dev, USB_DIR_IN | + USB_TYPE_VENDOR | USB_RECIP_DEVICE, + REQ_02_GET_IR_CODE, 0, 0, buf, 2); + + msleep(10); + + dprintk("read data=%04x\n", buf[0] | buf[1] << 8); + if (rc < 0) + return rc; + + poll_result->rc_data = buf[0] | buf[1] << 8; + } + if ((poll_result->rc_data & 0x00ff) != 0xff) + ir->key = 1; } return 0; } @@ -180,12 +198,11 @@ static void tm6000_ir_handle_key(struct tm6000_IR *ir) return; } - dprintk("ir->get_key result data=%02x %02x\n", - poll_result.rc_data[0], poll_result.rc_data[1]); + dprintk("ir->get_key result data=%04x\n", poll_result.rc_data); - if (poll_result.rc_data[0] != 0xff && ir->key == 1) { + if (ir->key) { ir_input_keydown(ir->input->input_dev, &ir->ir, - poll_result.rc_data[0] | poll_result.rc_data[1] << 8); + (u32)poll_result.rc_data); ir_input_nokey(ir->input->input_dev, &ir->ir); ir->key = 0; diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c index 73c153092f72..5e9da996a151 100644 --- a/fs/ceph/caps.c +++ b/fs/ceph/caps.c @@ -2283,7 +2283,8 @@ static void handle_cap_grant(struct inode *inode, struct ceph_mds_caps *grant, { struct ceph_inode_info *ci = ceph_inode(inode); int mds = session->s_mds; - int seq = le32_to_cpu(grant->seq); + unsigned seq = le32_to_cpu(grant->seq); + unsigned issue_seq = le32_to_cpu(grant->issue_seq); int newcaps = le32_to_cpu(grant->caps); int issued, implemented, used, wanted, dirty; u64 size = le64_to_cpu(grant->size); @@ -2295,8 +2296,8 @@ static void handle_cap_grant(struct inode *inode, struct ceph_mds_caps *grant, int revoked_rdcache = 0; int queue_invalidate = 0; - dout("handle_cap_grant inode %p cap %p mds%d seq %d %s\n", - inode, cap, mds, seq, ceph_cap_string(newcaps)); + dout("handle_cap_grant inode %p cap %p mds%d seq %u/%u %s\n", + inode, cap, mds, seq, issue_seq, ceph_cap_string(newcaps)); dout(" size %llu max_size %llu, i_size %llu\n", size, max_size, inode->i_size); @@ -2392,6 +2393,7 @@ static void handle_cap_grant(struct inode *inode, struct ceph_mds_caps *grant, } cap->seq = seq; + cap->issue_seq = issue_seq; /* file layout may have changed */ ci->i_layout = grant->layout; @@ -2774,15 +2776,7 @@ void ceph_handle_caps(struct ceph_mds_session *session, if (op == CEPH_CAP_OP_IMPORT) __queue_cap_release(session, vino.ino, cap_id, mseq, seq); - - /* - * send any full release message to try to move things - * along for the mds (who clearly thinks we still have this - * cap). - */ - ceph_add_cap_releases(mdsc, session); - ceph_send_cap_releases(mdsc, session); - goto done; + goto flush_cap_releases; } /* these will work even if we don't have a cap yet */ @@ -2810,7 +2804,7 @@ void ceph_handle_caps(struct ceph_mds_session *session, dout(" no cap on %p ino %llx.%llx from mds%d\n", inode, ceph_ino(inode), ceph_snap(inode), mds); spin_unlock(&inode->i_lock); - goto done; + goto flush_cap_releases; } /* note that each of these drops i_lock for us */ @@ -2834,6 +2828,17 @@ void ceph_handle_caps(struct ceph_mds_session *session, ceph_cap_op_name(op)); } + goto done; + +flush_cap_releases: + /* + * send any full release message to try to move things + * along for the mds (who clearly thinks we still have this + * cap). + */ + ceph_add_cap_releases(mdsc, session); + ceph_send_cap_releases(mdsc, session); + done: mutex_unlock(&session->s_mutex); done_unlocked: diff --git a/fs/ceph/export.c b/fs/ceph/export.c index 4480cb1c63e7..e38423e82f2e 100644 --- a/fs/ceph/export.c +++ b/fs/ceph/export.c @@ -42,32 +42,37 @@ struct ceph_nfs_confh { static int ceph_encode_fh(struct dentry *dentry, u32 *rawfh, int *max_len, int connectable) { + int type; struct ceph_nfs_fh *fh = (void *)rawfh; struct ceph_nfs_confh *cfh = (void *)rawfh; struct dentry *parent = dentry->d_parent; struct inode *inode = dentry->d_inode; - int type; + int connected_handle_length = sizeof(*cfh)/4; + int handle_length = sizeof(*fh)/4; /* don't re-export snaps */ if (ceph_snap(inode) != CEPH_NOSNAP) return -EINVAL; - if (*max_len >= sizeof(*cfh)) { + if (*max_len >= connected_handle_length) { dout("encode_fh %p connectable\n", dentry); cfh->ino = ceph_ino(dentry->d_inode); cfh->parent_ino = ceph_ino(parent->d_inode); cfh->parent_name_hash = parent->d_name.hash; - *max_len = sizeof(*cfh); + *max_len = connected_handle_length; type = 2; - } else if (*max_len > sizeof(*fh)) { - if (connectable) - return -ENOSPC; + } else if (*max_len >= handle_length) { + if (connectable) { + *max_len = connected_handle_length; + return 255; + } dout("encode_fh %p\n", dentry); fh->ino = ceph_ino(dentry->d_inode); - *max_len = sizeof(*fh); + *max_len = handle_length; type = 1; } else { - return -ENOSPC; + *max_len = handle_length; + return 255; } return type; } diff --git a/fs/ceph/file.c b/fs/ceph/file.c index 8c044a4f0457..66e4da6dba22 100644 --- a/fs/ceph/file.c +++ b/fs/ceph/file.c @@ -697,7 +697,7 @@ more: * start_request so that a tid has been assigned. */ spin_lock(&ci->i_unsafe_lock); - list_add(&ci->i_unsafe_writes, &req->r_unsafe_item); + list_add(&req->r_unsafe_item, &ci->i_unsafe_writes); spin_unlock(&ci->i_unsafe_lock); ceph_get_cap_refs(ci, CEPH_CAP_FILE_WR); } diff --git a/fs/ceph/osd_client.c b/fs/ceph/osd_client.c index dfced1dacbcd..3b5571b8ce22 100644 --- a/fs/ceph/osd_client.c +++ b/fs/ceph/osd_client.c @@ -549,7 +549,7 @@ static void __unregister_request(struct ceph_osd_client *osdc, */ static void __cancel_request(struct ceph_osd_request *req) { - if (req->r_sent) { + if (req->r_sent && req->r_osd) { ceph_con_revoke(&req->r_osd->o_con, req->r_request); req->r_sent = 0; } diff --git a/fs/exofs/inode.c b/fs/exofs/inode.c index eb7368ebd8cd..3eadd97324b1 100644 --- a/fs/exofs/inode.c +++ b/fs/exofs/inode.c @@ -54,6 +54,9 @@ struct page_collect { unsigned nr_pages; unsigned long length; loff_t pg_first; /* keep 64bit also in 32-arches */ + bool read_4_write; /* This means two things: that the read is sync + * And the pages should not be unlocked. + */ }; static void _pcol_init(struct page_collect *pcol, unsigned expected_pages, @@ -71,6 +74,7 @@ static void _pcol_init(struct page_collect *pcol, unsigned expected_pages, pcol->nr_pages = 0; pcol->length = 0; pcol->pg_first = -1; + pcol->read_4_write = false; } static void _pcol_reset(struct page_collect *pcol) @@ -347,7 +351,8 @@ static int readpage_strip(void *data, struct page *page) if (PageError(page)) ClearPageError(page); - unlock_page(page); + if (!pcol->read_4_write) + unlock_page(page); EXOFS_DBGMSG("readpage_strip(0x%lx, 0x%lx) empty page," " splitting\n", inode->i_ino, page->index); @@ -428,6 +433,7 @@ static int _readpage(struct page *page, bool is_sync) /* readpage_strip might call read_exec(,is_sync==false) at several * places but not if we have a single page. */ + pcol.read_4_write = is_sync; ret = readpage_strip(&pcol, page); if (ret) { EXOFS_ERR("_readpage => %d\n", ret); diff --git a/fs/notify/Kconfig b/fs/notify/Kconfig index 22c629eedd82..b388443c3a09 100644 --- a/fs/notify/Kconfig +++ b/fs/notify/Kconfig @@ -3,4 +3,4 @@ config FSNOTIFY source "fs/notify/dnotify/Kconfig" source "fs/notify/inotify/Kconfig" -source "fs/notify/fanotify/Kconfig" +#source "fs/notify/fanotify/Kconfig" diff --git a/fs/xfs/linux-2.6/xfs_sync.c b/fs/xfs/linux-2.6/xfs_sync.c index d59c4a65d492..81976ffed7d6 100644 --- a/fs/xfs/linux-2.6/xfs_sync.c +++ b/fs/xfs/linux-2.6/xfs_sync.c @@ -668,14 +668,11 @@ xfs_inode_set_reclaim_tag( xfs_perag_put(pag); } -void -__xfs_inode_clear_reclaim_tag( - xfs_mount_t *mp, +STATIC void +__xfs_inode_clear_reclaim( xfs_perag_t *pag, xfs_inode_t *ip) { - radix_tree_tag_clear(&pag->pag_ici_root, - XFS_INO_TO_AGINO(mp, ip->i_ino), XFS_ICI_RECLAIM_TAG); pag->pag_ici_reclaimable--; if (!pag->pag_ici_reclaimable) { /* clear the reclaim tag from the perag radix tree */ @@ -689,6 +686,17 @@ __xfs_inode_clear_reclaim_tag( } } +void +__xfs_inode_clear_reclaim_tag( + xfs_mount_t *mp, + xfs_perag_t *pag, + xfs_inode_t *ip) +{ + radix_tree_tag_clear(&pag->pag_ici_root, + XFS_INO_TO_AGINO(mp, ip->i_ino), XFS_ICI_RECLAIM_TAG); + __xfs_inode_clear_reclaim(pag, ip); +} + /* * Inodes in different states need to be treated differently, and the return * value of xfs_iflush is not sufficient to get this right. The following table @@ -838,6 +846,7 @@ reclaim: if (!radix_tree_delete(&pag->pag_ici_root, XFS_INO_TO_AGINO(ip->i_mount, ip->i_ino))) ASSERT(0); + __xfs_inode_clear_reclaim(pag, ip); write_unlock(&pag->pag_ici_lock); /* diff --git a/include/drm/ttm/ttm_bo_api.h b/include/drm/ttm/ttm_bo_api.h index 267a86c74e2e..2040e6c4f172 100644 --- a/include/drm/ttm/ttm_bo_api.h +++ b/include/drm/ttm/ttm_bo_api.h @@ -246,9 +246,11 @@ struct ttm_buffer_object { atomic_t reserved; - /** * Members protected by the bo::lock + * In addition, setting sync_obj to anything else + * than NULL requires bo::reserved to be held. This allows for + * checking NULL while reserved but not holding bo::lock. */ void *sync_obj_arg; diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 626b629429ff..4e8ea8c8ec1e 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -118,7 +118,6 @@ header-y += eventpoll.h header-y += ext2_fs.h header-y += fadvise.h header-y += falloc.h -header-y += fanotify.h header-y += fb.h header-y += fcntl.h header-y += fd.h diff --git a/include/linux/elevator.h b/include/linux/elevator.h index 926b50322a46..4fd978e7eb83 100644 --- a/include/linux/elevator.h +++ b/include/linux/elevator.h @@ -93,6 +93,7 @@ struct elevator_queue struct elevator_type *elevator_type; struct mutex sysfs_lock; struct hlist_head *hash; + unsigned int registered:1; }; /* diff --git a/include/media/videobuf-dma-sg.h b/include/media/videobuf-dma-sg.h index 97e07f46a0fa..aa4ebb42a565 100644 --- a/include/media/videobuf-dma-sg.h +++ b/include/media/videobuf-dma-sg.h @@ -48,6 +48,7 @@ struct videobuf_dmabuf { /* for userland buffer */ int offset; + size_t size; struct page **pages; /* for kernel buffers */ diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h index 27a902d9b3a9..30fce0128dd7 100644 --- a/include/net/bluetooth/bluetooth.h +++ b/include/net/bluetooth/bluetooth.h @@ -161,12 +161,30 @@ static inline struct sk_buff *bt_skb_send_alloc(struct sock *sk, unsigned long l { struct sk_buff *skb; + release_sock(sk); if ((skb = sock_alloc_send_skb(sk, len + BT_SKB_RESERVE, nb, err))) { skb_reserve(skb, BT_SKB_RESERVE); bt_cb(skb)->incoming = 0; } + lock_sock(sk); + + if (!skb && *err) + return NULL; + + *err = sock_error(sk); + if (*err) + goto out; + + if (sk->sk_shutdown) { + *err = -ECONNRESET; + goto out; + } return skb; + +out: + kfree_skb(skb); + return NULL; } int bt_err(__u16 code); diff --git a/kernel/perf_event.c b/kernel/perf_event.c index db5b56064687..b98bed3d8182 100644 --- a/kernel/perf_event.c +++ b/kernel/perf_event.c @@ -2202,15 +2202,13 @@ static void perf_event_for_each(struct perf_event *event, static int perf_event_period(struct perf_event *event, u64 __user *arg) { struct perf_event_context *ctx = event->ctx; - unsigned long size; int ret = 0; u64 value; if (!event->attr.sample_period) return -EINVAL; - size = copy_from_user(&value, arg, sizeof(value)); - if (size != sizeof(value)) + if (copy_from_user(&value, arg, sizeof(value))) return -EFAULT; if (!value) diff --git a/kernel/signal.c b/kernel/signal.c index bded65187780..919562c3d6b7 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -2215,6 +2215,14 @@ int copy_siginfo_to_user(siginfo_t __user *to, siginfo_t *from) #ifdef __ARCH_SI_TRAPNO err |= __put_user(from->si_trapno, &to->si_trapno); #endif +#ifdef BUS_MCEERR_AO + /* + * Other callers might not initialize the si_lsb field, + * so check explicitely for the right codes here. + */ + if (from->si_code == BUS_MCEERR_AR || from->si_code == BUS_MCEERR_AO) + err |= __put_user(from->si_addr_lsb, &to->si_addr_lsb); +#endif break; case __SI_CHLD: err |= __put_user(from->si_pid, &to->si_pid); diff --git a/kernel/sysctl.c b/kernel/sysctl.c index f88552c6d227..3a45c224770f 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -2485,7 +2485,7 @@ static int __do_proc_doulongvec_minmax(void *data, struct ctl_table *table, int kbuf[left] = 0; } - for (; left && vleft--; i++, min++, max++, first=0) { + for (; left && vleft--; i++, first = 0) { unsigned long val; if (write) { diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 492197e2f86c..bca96377fd4e 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -405,7 +405,7 @@ static inline int test_time_stamp(u64 delta) #define BUF_MAX_DATA_SIZE (BUF_PAGE_SIZE - (sizeof(u32) * 2)) /* Max number of timestamps that can fit on a page */ -#define RB_TIMESTAMPS_PER_PAGE (BUF_PAGE_SIZE / RB_LEN_TIME_STAMP) +#define RB_TIMESTAMPS_PER_PAGE (BUF_PAGE_SIZE / RB_LEN_TIME_EXTEND) int ring_buffer_print_page_header(struct trace_seq *s) { diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 3eed583895a6..9be3cf8a5da4 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -3587,9 +3587,13 @@ unlock: static void mem_cgroup_threshold(struct mem_cgroup *memcg) { - __mem_cgroup_threshold(memcg, false); - if (do_swap_account) - __mem_cgroup_threshold(memcg, true); + while (memcg) { + __mem_cgroup_threshold(memcg, false); + if (do_swap_account) + __mem_cgroup_threshold(memcg, true); + + memcg = parent_mem_cgroup(memcg); + } } static int compare_thresholds(const void *a, const void *b) diff --git a/mm/memory-failure.c b/mm/memory-failure.c index 9c26eeca1342..757f6b0accfe 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -183,7 +183,7 @@ EXPORT_SYMBOL_GPL(hwpoison_filter); * signal. */ static int kill_proc_ao(struct task_struct *t, unsigned long addr, int trapno, - unsigned long pfn) + unsigned long pfn, struct page *page) { struct siginfo si; int ret; @@ -198,7 +198,7 @@ static int kill_proc_ao(struct task_struct *t, unsigned long addr, int trapno, #ifdef __ARCH_SI_TRAPNO si.si_trapno = trapno; #endif - si.si_addr_lsb = PAGE_SHIFT; + si.si_addr_lsb = compound_order(compound_head(page)) + PAGE_SHIFT; /* * Don't use force here, it's convenient if the signal * can be temporarily blocked. @@ -235,7 +235,7 @@ void shake_page(struct page *p, int access) int nr; do { nr = shrink_slab(1000, GFP_KERNEL, 1000); - if (page_count(p) == 0) + if (page_count(p) == 1) break; } while (nr > 10); } @@ -327,7 +327,7 @@ static void add_to_kill(struct task_struct *tsk, struct page *p, * wrong earlier. */ static void kill_procs_ao(struct list_head *to_kill, int doit, int trapno, - int fail, unsigned long pfn) + int fail, struct page *page, unsigned long pfn) { struct to_kill *tk, *next; @@ -352,7 +352,7 @@ static void kill_procs_ao(struct list_head *to_kill, int doit, int trapno, * process anyways. */ else if (kill_proc_ao(tk->tsk, tk->addr, trapno, - pfn) < 0) + pfn, page) < 0) printk(KERN_ERR "MCE %#lx: Cannot send advisory machine check signal to %s:%d\n", pfn, tk->tsk->comm, tk->tsk->pid); @@ -928,7 +928,7 @@ static int hwpoison_user_mappings(struct page *p, unsigned long pfn, * any accesses to the poisoned memory. */ kill_procs_ao(&tokill, !!PageDirty(hpage), trapno, - ret != SWAP_SUCCESS, pfn); + ret != SWAP_SUCCESS, p, pfn); return ret; } diff --git a/mm/page_alloc.c b/mm/page_alloc.c index a8cfa9cc6e86..f12ad1836abe 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -5182,9 +5182,9 @@ void *__init alloc_large_system_hash(const char *tablename, if (!table) panic("Failed to allocate %s hash table\n", tablename); - printk(KERN_INFO "%s hash table entries: %d (order: %d, %lu bytes)\n", + printk(KERN_INFO "%s hash table entries: %ld (order: %d, %lu bytes)\n", tablename, - (1U << log2qty), + (1UL << log2qty), ilog2(size) - PAGE_SHIFT, size); diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c index fadf26b4ed7c..0b54b7dd8401 100644 --- a/net/bluetooth/l2cap.c +++ b/net/bluetooth/l2cap.c @@ -1441,33 +1441,23 @@ static inline void l2cap_do_send(struct sock *sk, struct sk_buff *skb) static void l2cap_streaming_send(struct sock *sk) { - struct sk_buff *skb, *tx_skb; + struct sk_buff *skb; struct l2cap_pinfo *pi = l2cap_pi(sk); u16 control, fcs; - while ((skb = sk->sk_send_head)) { - tx_skb = skb_clone(skb, GFP_ATOMIC); - - control = get_unaligned_le16(tx_skb->data + L2CAP_HDR_SIZE); + while ((skb = skb_dequeue(TX_QUEUE(sk)))) { + control = get_unaligned_le16(skb->data + L2CAP_HDR_SIZE); control |= pi->next_tx_seq << L2CAP_CTRL_TXSEQ_SHIFT; - put_unaligned_le16(control, tx_skb->data + L2CAP_HDR_SIZE); + put_unaligned_le16(control, skb->data + L2CAP_HDR_SIZE); if (pi->fcs == L2CAP_FCS_CRC16) { - fcs = crc16(0, (u8 *)tx_skb->data, tx_skb->len - 2); - put_unaligned_le16(fcs, tx_skb->data + tx_skb->len - 2); + fcs = crc16(0, (u8 *)skb->data, skb->len - 2); + put_unaligned_le16(fcs, skb->data + skb->len - 2); } - l2cap_do_send(sk, tx_skb); + l2cap_do_send(sk, skb); pi->next_tx_seq = (pi->next_tx_seq + 1) % 64; - - if (skb_queue_is_last(TX_QUEUE(sk), skb)) - sk->sk_send_head = NULL; - else - sk->sk_send_head = skb_queue_next(TX_QUEUE(sk), skb); - - skb = skb_dequeue(TX_QUEUE(sk)); - kfree_skb(skb); } } @@ -1960,6 +1950,11 @@ static int l2cap_sock_setsockopt_old(struct socket *sock, int optname, char __us switch (optname) { case L2CAP_OPTIONS: + if (sk->sk_state == BT_CONNECTED) { + err = -EINVAL; + break; + } + opts.imtu = l2cap_pi(sk)->imtu; opts.omtu = l2cap_pi(sk)->omtu; opts.flush_to = l2cap_pi(sk)->flush_to; @@ -2771,10 +2766,10 @@ static int l2cap_parse_conf_rsp(struct sock *sk, void *rsp, int len, void *data, case L2CAP_CONF_MTU: if (val < L2CAP_DEFAULT_MIN_MTU) { *result = L2CAP_CONF_UNACCEPT; - pi->omtu = L2CAP_DEFAULT_MIN_MTU; + pi->imtu = L2CAP_DEFAULT_MIN_MTU; } else - pi->omtu = val; - l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, pi->omtu); + pi->imtu = val; + l2cap_add_conf_opt(&ptr, L2CAP_CONF_MTU, 2, pi->imtu); break; case L2CAP_CONF_FLUSH_TO: @@ -3071,6 +3066,17 @@ static inline int l2cap_connect_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hd return 0; } +static inline void set_default_fcs(struct l2cap_pinfo *pi) +{ + /* FCS is enabled only in ERTM or streaming mode, if one or both + * sides request it. + */ + if (pi->mode != L2CAP_MODE_ERTM && pi->mode != L2CAP_MODE_STREAMING) + pi->fcs = L2CAP_FCS_NONE; + else if (!(pi->conf_state & L2CAP_CONF_NO_FCS_RECV)) + pi->fcs = L2CAP_FCS_CRC16; +} + static inline int l2cap_config_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, u16 cmd_len, u8 *data) { struct l2cap_conf_req *req = (struct l2cap_conf_req *) data; @@ -3088,14 +3094,8 @@ static inline int l2cap_config_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr if (!sk) return -ENOENT; - if (sk->sk_state != BT_CONFIG) { - struct l2cap_cmd_rej rej; - - rej.reason = cpu_to_le16(0x0002); - l2cap_send_cmd(conn, cmd->ident, L2CAP_COMMAND_REJ, - sizeof(rej), &rej); + if (sk->sk_state == BT_DISCONN) goto unlock; - } /* Reject if config buffer is too small. */ len = cmd_len - sizeof(*req); @@ -3135,9 +3135,7 @@ static inline int l2cap_config_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr goto unlock; if (l2cap_pi(sk)->conf_state & L2CAP_CONF_INPUT_DONE) { - if (!(l2cap_pi(sk)->conf_state & L2CAP_CONF_NO_FCS_RECV) || - l2cap_pi(sk)->fcs != L2CAP_FCS_NONE) - l2cap_pi(sk)->fcs = L2CAP_FCS_CRC16; + set_default_fcs(l2cap_pi(sk)); sk->sk_state = BT_CONNECTED; @@ -3225,9 +3223,7 @@ static inline int l2cap_config_rsp(struct l2cap_conn *conn, struct l2cap_cmd_hdr l2cap_pi(sk)->conf_state |= L2CAP_CONF_INPUT_DONE; if (l2cap_pi(sk)->conf_state & L2CAP_CONF_OUTPUT_DONE) { - if (!(l2cap_pi(sk)->conf_state & L2CAP_CONF_NO_FCS_RECV) || - l2cap_pi(sk)->fcs != L2CAP_FCS_NONE) - l2cap_pi(sk)->fcs = L2CAP_FCS_CRC16; + set_default_fcs(l2cap_pi(sk)); sk->sk_state = BT_CONNECTED; l2cap_pi(sk)->next_tx_seq = 0; diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c index 44a623275951..194b3a04cfd3 100644 --- a/net/bluetooth/rfcomm/sock.c +++ b/net/bluetooth/rfcomm/sock.c @@ -82,11 +82,14 @@ static void rfcomm_sk_data_ready(struct rfcomm_dlc *d, struct sk_buff *skb) static void rfcomm_sk_state_change(struct rfcomm_dlc *d, int err) { struct sock *sk = d->owner, *parent; + unsigned long flags; + if (!sk) return; BT_DBG("dlc %p state %ld err %d", d, d->state, err); + local_irq_save(flags); bh_lock_sock(sk); if (err) @@ -108,6 +111,7 @@ static void rfcomm_sk_state_change(struct rfcomm_dlc *d, int err) } bh_unlock_sock(sk); + local_irq_restore(flags); if (parent && sock_flag(sk, SOCK_ZAPPED)) { /* We have to drop DLC lock here, otherwise diff --git a/net/caif/caif_socket.c b/net/caif/caif_socket.c index 8ce904786116..4bf28f25f368 100644 --- a/net/caif/caif_socket.c +++ b/net/caif/caif_socket.c @@ -827,6 +827,7 @@ static int caif_connect(struct socket *sock, struct sockaddr *uaddr, long timeo; int err; int ifindex, headroom, tailroom; + unsigned int mtu; struct net_device *dev; lock_sock(sk); @@ -896,15 +897,23 @@ static int caif_connect(struct socket *sock, struct sockaddr *uaddr, cf_sk->sk.sk_state = CAIF_DISCONNECTED; goto out; } - dev = dev_get_by_index(sock_net(sk), ifindex); + + err = -ENODEV; + rcu_read_lock(); + dev = dev_get_by_index_rcu(sock_net(sk), ifindex); + if (!dev) { + rcu_read_unlock(); + goto out; + } cf_sk->headroom = LL_RESERVED_SPACE_EXTRA(dev, headroom); + mtu = dev->mtu; + rcu_read_unlock(); + cf_sk->tailroom = tailroom; - cf_sk->maxframe = dev->mtu - (headroom + tailroom); - dev_put(dev); + cf_sk->maxframe = mtu - (headroom + tailroom); if (cf_sk->maxframe < 1) { - pr_warning("CAIF: %s(): CAIF Interface MTU too small (%d)\n", - __func__, dev->mtu); - err = -ENODEV; + pr_warning("CAIF: %s(): CAIF Interface MTU too small (%u)\n", + __func__, mtu); goto out; } diff --git a/net/core/ethtool.c b/net/core/ethtool.c index 7a85367b3c2f..4016ac6bdd5e 100644 --- a/net/core/ethtool.c +++ b/net/core/ethtool.c @@ -348,7 +348,7 @@ static noinline_for_stack int ethtool_get_rxnfc(struct net_device *dev, if (info.cmd == ETHTOOL_GRXCLSRLALL) { if (info.rule_cnt > 0) { if (info.rule_cnt <= KMALLOC_MAX_SIZE / sizeof(u32)) - rule_buf = kmalloc(info.rule_cnt * sizeof(u32), + rule_buf = kzalloc(info.rule_cnt * sizeof(u32), GFP_USER); if (!rule_buf) return -ENOMEM; diff --git a/net/core/stream.c b/net/core/stream.c index d959e0f41528..f5df85dcd20b 100644 --- a/net/core/stream.c +++ b/net/core/stream.c @@ -141,10 +141,10 @@ int sk_stream_wait_memory(struct sock *sk, long *timeo_p) set_bit(SOCK_NOSPACE, &sk->sk_socket->flags); sk->sk_write_pending++; - sk_wait_event(sk, ¤t_timeo, !sk->sk_err && - !(sk->sk_shutdown & SEND_SHUTDOWN) && - sk_stream_memory_free(sk) && - vm_wait); + sk_wait_event(sk, ¤t_timeo, sk->sk_err || + (sk->sk_shutdown & SEND_SHUTDOWN) || + (sk_stream_memory_free(sk) && + !vm_wait)); sk->sk_write_pending--; if (vm_wait) { diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig index 72380a30d1c8..7cd7760144f7 100644 --- a/net/ipv4/Kconfig +++ b/net/ipv4/Kconfig @@ -413,7 +413,7 @@ config INET_XFRM_MODE_BEET If unsure, say Y. config INET_LRO - bool "Large Receive Offload (ipv4/tcp)" + tristate "Large Receive Offload (ipv4/tcp)" default y ---help--- Support for Large Receive Offload (ipv4/tcp). diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index 1fdcacd36ce7..2a4bb76f2132 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -834,7 +834,7 @@ static void igmp_heard_query(struct in_device *in_dev, struct sk_buff *skb, int mark = 0; - if (len == 8 || IGMP_V2_SEEN(in_dev)) { + if (len == 8) { if (ih->code == 0) { /* Alas, old v1 router presents here. */ @@ -856,6 +856,18 @@ static void igmp_heard_query(struct in_device *in_dev, struct sk_buff *skb, igmpv3_clear_delrec(in_dev); } else if (len < 12) { return; /* ignore bogus packet; freed by caller */ + } else if (IGMP_V1_SEEN(in_dev)) { + /* This is a v3 query with v1 queriers present */ + max_delay = IGMP_Query_Response_Interval; + group = 0; + } else if (IGMP_V2_SEEN(in_dev)) { + /* this is a v3 query with v2 queriers present; + * Interpretation of the max_delay code is problematic here. + * A real v2 host would use ih_code directly, while v3 has a + * different encoding. We use the v3 encoding as more likely + * to be intended in a v3 query. + */ + max_delay = IGMPV3_MRC(ih3->code)*(HZ/IGMP_TIMER_SCALE); } else { /* v3 */ if (!pskb_may_pull(skb, sizeof(struct igmpv3_query))) return; diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 8323136bdc54..a275c6e1e25c 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -1556,14 +1556,13 @@ out: * i.e. Path MTU discovery */ -void rt6_pmtu_discovery(struct in6_addr *daddr, struct in6_addr *saddr, - struct net_device *dev, u32 pmtu) +static void rt6_do_pmtu_disc(struct in6_addr *daddr, struct in6_addr *saddr, + struct net *net, u32 pmtu, int ifindex) { struct rt6_info *rt, *nrt; - struct net *net = dev_net(dev); int allfrag = 0; - rt = rt6_lookup(net, daddr, saddr, dev->ifindex, 0); + rt = rt6_lookup(net, daddr, saddr, ifindex, 0); if (rt == NULL) return; @@ -1631,6 +1630,27 @@ out: dst_release(&rt->dst); } +void rt6_pmtu_discovery(struct in6_addr *daddr, struct in6_addr *saddr, + struct net_device *dev, u32 pmtu) +{ + struct net *net = dev_net(dev); + + /* + * RFC 1981 states that a node "MUST reduce the size of the packets it + * is sending along the path" that caused the Packet Too Big message. + * Since it's not possible in the general case to determine which + * interface was used to send the original packet, we update the MTU + * on the interface that will be used to send future packets. We also + * update the MTU on the interface that received the Packet Too Big in + * case the original packet was forced out that interface with + * SO_BINDTODEVICE or similar. This is the next best thing to the + * correct behaviour, which would be to update the MTU on all + * interfaces. + */ + rt6_do_pmtu_disc(daddr, saddr, net, pmtu, 0); + rt6_do_pmtu_disc(daddr, saddr, net, pmtu, dev->ifindex); +} + /* * Misc support functions */ diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index c893f236acea..8f23401832b7 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -175,6 +175,8 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, set_bit(HT_AGG_STATE_STOPPING, &tid_tx->state); + del_timer_sync(&tid_tx->addba_resp_timer); + /* * After this packets are no longer handed right through * to the driver but are put onto tid_tx->pending instead, diff --git a/net/mac80211/status.c b/net/mac80211/status.c index 10caec5ea8fa..34da67995d94 100644 --- a/net/mac80211/status.c +++ b/net/mac80211/status.c @@ -377,7 +377,7 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) skb2 = skb_clone(skb, GFP_ATOMIC); if (skb2) { skb2->dev = prev_dev; - netif_receive_skb(skb2); + netif_rx(skb2); } } @@ -386,7 +386,7 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) } if (prev_dev) { skb->dev = prev_dev; - netif_receive_skb(skb); + netif_rx(skb); skb = NULL; } rcu_read_unlock(); diff --git a/net/sched/cls_u32.c b/net/sched/cls_u32.c index 7416a5c73b2a..b0c2a82178af 100644 --- a/net/sched/cls_u32.c +++ b/net/sched/cls_u32.c @@ -137,7 +137,7 @@ next_knode: int toff = off + key->off + (off2 & key->offmask); __be32 *data, _data; - if (skb_headroom(skb) + toff < 0) + if (skb_headroom(skb) + toff > INT_MAX) goto out; data = skb_header_pointer(skb, toff, 4, &_data); diff --git a/net/sctp/auth.c b/net/sctp/auth.c index 86366390038a..ddbbf7c81fa1 100644 --- a/net/sctp/auth.c +++ b/net/sctp/auth.c @@ -543,16 +543,20 @@ struct sctp_hmac *sctp_auth_asoc_get_hmac(const struct sctp_association *asoc) id = ntohs(hmacs->hmac_ids[i]); /* Check the id is in the supported range */ - if (id > SCTP_AUTH_HMAC_ID_MAX) + if (id > SCTP_AUTH_HMAC_ID_MAX) { + id = 0; continue; + } /* See is we support the id. Supported IDs have name and * length fields set, so that we can allocated and use * them. We can safely just check for name, for without the * name, we can't allocate the TFM. */ - if (!sctp_hmac_list[id].hmac_name) + if (!sctp_hmac_list[id].hmac_name) { + id = 0; continue; + } break; } diff --git a/net/sctp/socket.c b/net/sctp/socket.c index ca44917872d2..fbb70770ad05 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -916,6 +916,11 @@ SCTP_STATIC int sctp_setsockopt_bindx(struct sock* sk, /* Walk through the addrs buffer and count the number of addresses. */ addr_buf = kaddrs; while (walk_size < addrs_size) { + if (walk_size + sizeof(sa_family_t) > addrs_size) { + kfree(kaddrs); + return -EINVAL; + } + sa_addr = (struct sockaddr *)addr_buf; af = sctp_get_af_specific(sa_addr->sa_family); @@ -1002,9 +1007,13 @@ static int __sctp_connect(struct sock* sk, /* Walk through the addrs buffer and count the number of addresses. */ addr_buf = kaddrs; while (walk_size < addrs_size) { + if (walk_size + sizeof(sa_family_t) > addrs_size) { + err = -EINVAL; + goto out_free; + } + sa_addr = (union sctp_addr *)addr_buf; af = sctp_get_af_specific(sa_addr->sa.sa_family); - port = ntohs(sa_addr->v4.sin_port); /* If the address family is not supported or if this address * causes the address buffer to overflow return EINVAL. @@ -1014,6 +1023,8 @@ static int __sctp_connect(struct sock* sk, goto out_free; } + port = ntohs(sa_addr->v4.sin_port); + /* Save current address so we can work with it */ memcpy(&to, sa_addr, af->sockaddr_len); diff --git a/scripts/kconfig/conf.c b/scripts/kconfig/conf.c index 5b7c86ea43a1..7ef429cd5cb3 100644 --- a/scripts/kconfig/conf.c +++ b/scripts/kconfig/conf.c @@ -427,7 +427,7 @@ static void check_conf(struct menu *menu) if (sym->name && !sym_is_choice_value(sym)) { printf("CONFIG_%s\n", sym->name); } - } else { + } else if (input_mode != oldnoconfig) { if (!conf_cnt++) printf(_("*\n* Restart config...\n*\n")); rootEntry = menu_get_parent_menu(menu); diff --git a/scripts/kconfig/expr.h b/scripts/kconfig/expr.h index 6ee2e4fb1481..170459c224a1 100644 --- a/scripts/kconfig/expr.h +++ b/scripts/kconfig/expr.h @@ -165,7 +165,6 @@ struct menu { struct symbol *sym; struct property *prompt; struct expr *dep; - struct expr *dir_dep; unsigned int flags; char *help; struct file *file; diff --git a/scripts/kconfig/menu.c b/scripts/kconfig/menu.c index 4fb590247f33..edda8b49619d 100644 --- a/scripts/kconfig/menu.c +++ b/scripts/kconfig/menu.c @@ -107,7 +107,6 @@ static struct expr *menu_check_dep(struct expr *e) void menu_add_dep(struct expr *dep) { current_entry->dep = expr_alloc_and(current_entry->dep, menu_check_dep(dep)); - current_entry->dir_dep = current_entry->dep; } void menu_set_type(int type) @@ -291,10 +290,6 @@ void menu_finalize(struct menu *parent) for (menu = parent->list; menu; menu = menu->next) menu_finalize(menu); } else if (sym) { - /* ignore inherited dependencies for dir_dep */ - sym->dir_dep.expr = expr_transform(expr_copy(parent->dir_dep)); - sym->dir_dep.expr = expr_eliminate_dups(sym->dir_dep.expr); - basedep = parent->prompt ? parent->prompt->visible.expr : NULL; basedep = expr_trans_compare(basedep, E_UNEQUAL, &symbol_no); basedep = expr_eliminate_dups(expr_transform(basedep)); @@ -325,6 +320,8 @@ void menu_finalize(struct menu *parent) parent->next = last_menu->next; last_menu->next = NULL; } + + sym->dir_dep.expr = parent->dep; } for (menu = parent->list; menu; menu = menu->next) { if (sym && sym_is_choice(sym) && diff --git a/scripts/kconfig/symbol.c b/scripts/kconfig/symbol.c index 943712ca6c0a..1f8b305449db 100644 --- a/scripts/kconfig/symbol.c +++ b/scripts/kconfig/symbol.c @@ -350,6 +350,7 @@ void sym_calc_value(struct symbol *sym) } } calc_newval: +#if 0 if (sym->dir_dep.tri == no && sym->rev_dep.tri != no) { fprintf(stderr, "warning: ("); expr_fprint(sym->rev_dep.expr, stderr); @@ -358,6 +359,7 @@ void sym_calc_value(struct symbol *sym) expr_fprint(sym->dir_dep.expr, stderr); fprintf(stderr, ")\n"); } +#endif newval.tri = EXPR_OR(newval.tri, sym->rev_dep.tri); } if (newval.tri == mod && sym_get_type(sym) == S_BOOLEAN) diff --git a/sound/oss/soundcard.c b/sound/oss/soundcard.c index 92aa762ffb7e..07f803e6d203 100644 --- a/sound/oss/soundcard.c +++ b/sound/oss/soundcard.c @@ -391,11 +391,11 @@ static long sound_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case SND_DEV_DSP: case SND_DEV_DSP16: case SND_DEV_AUDIO: - return audio_ioctl(dev, file, cmd, p); + ret = audio_ioctl(dev, file, cmd, p); break; case SND_DEV_MIDIN: - return MIDIbuf_ioctl(dev, file, cmd, p); + ret = MIDIbuf_ioctl(dev, file, cmd, p); break; } diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 95148e58026c..c16c5ba0fda0 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1747,6 +1747,8 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = { "HP dv6", STAC_HP_DV5), SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3061, "HP dv6", STAC_HP_DV5), /* HP dv6-1110ax */ + SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x363e, + "HP DV6", STAC_HP_DV5), SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_HP, 0xfff0, 0x7010, "HP", STAC_HP_DV5), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0233, diff --git a/tools/perf/perf.h b/tools/perf/perf.h index ef7aa0a0c526..95aaf565c704 100644 --- a/tools/perf/perf.h +++ b/tools/perf/perf.h @@ -73,6 +73,18 @@ void get_term_dimensions(struct winsize *ws); #define cpu_relax() asm volatile("":::"memory") #endif +#ifdef __mips__ +#include "../../arch/mips/include/asm/unistd.h" +#define rmb() asm volatile( \ + ".set mips2\n\t" \ + "sync\n\t" \ + ".set mips0" \ + : /* no output */ \ + : /* no input */ \ + : "memory") +#define cpu_relax() asm volatile("" ::: "memory") +#endif + #include <time.h> #include <unistd.h> #include <sys/types.h> |