diff options
| -rw-r--r-- | drivers/staging/comedi/drivers/ni_mio_common.c | 61 |
1 files changed, 46 insertions, 15 deletions
diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c index 8f0fe3a26c73..1a22c79c2817 100644 --- a/drivers/staging/comedi/drivers/ni_mio_common.c +++ b/drivers/staging/comedi/drivers/ni_mio_common.c @@ -1500,7 +1500,8 @@ static void handle_b_interrupt(struct comedi_device *dev, s->async->events |= COMEDI_CB_OVERFLOW; } - if (b_status & NISTC_AO_STATUS1_BC_TC) + if (s->async->cmd.stop_src != TRIG_NONE && + b_status & NISTC_AO_STATUS1_BC_TC) s->async->events |= COMEDI_CB_EOA; #ifndef PCIDMA @@ -2073,6 +2074,37 @@ static unsigned ni_timer_to_ns(const struct comedi_device *dev, int timer) return devpriv->clock_ns * (timer + 1); } +static void ni_cmd_set_mite_transfer(struct mite_dma_descriptor_ring *ring, + struct comedi_subdevice *sdev, + const struct comedi_cmd *cmd, + unsigned int max_count) { +#ifdef PCIDMA + unsigned int nbytes = max_count; + + if (cmd->stop_arg > 0 && cmd->stop_arg < max_count) + nbytes = cmd->stop_arg; + nbytes *= comedi_bytes_per_scan(sdev); + + if (nbytes > sdev->async->prealloc_bufsz) { + if (cmd->stop_arg > 0) + dev_err(sdev->device->class_dev, + "ni_cmd_set_mite_transfer: tried exact data transfer limits greater than buffer size\n"); + + /* + * we can only transfer up to the size of the buffer. In this + * case, the user is expected to continue to write into the + * comedi buffer (already implemented as a ring buffer). + */ + nbytes = sdev->async->prealloc_bufsz; + } + + mite_init_ring_descriptors(ring, sdev, nbytes); +#else + dev_err(sdev->device->class_dev, + "ni_cmd_set_mite_transfer: exact data transfer limits not implemented yet without DMA\n"); +#endif +} + static unsigned ni_min_ai_scan_period_ns(struct comedi_device *dev, unsigned num_channels) { @@ -3062,12 +3094,16 @@ static void ni_ao_cmd_set_counters(struct comedi_device *dev, devpriv->ao_mode2 &= ~NISTC_AO_MODE2_UC_INIT_LOAD_SRC; ni_stc_writew(dev, devpriv->ao_mode2, NISTC_AO_MODE2_REG); + /* + * if a user specifies '0', this automatically assumes the entire 24bit + * address space is available for the (multiple iterations of single + * buffer) MISB. Otherwise, stop_arg specifies the MISB length that + * will be used, regardless of whether we are in continuous mode or not. + * In continuous mode, the output will just iterate indefinitely over + * the MISB. + */ { - /* - * Current behavior is to configure the maximum update count - * possible when continuous output mode is requested. - */ - unsigned int stop_arg = cmd->stop_src == TRIG_COUNT ? + unsigned int stop_arg = cmd->stop_arg > 0 ? (cmd->stop_arg & 0xffffff) : 0xffffff; if (devpriv->is_m_series) { @@ -3311,6 +3347,7 @@ static int ni_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s) ni_ao_cmd_set_channels(dev, s); ni_ao_cmd_set_stop_conditions(dev, cmd); ni_ao_cmd_set_fifo_mode(dev); + ni_cmd_set_mite_transfer(devpriv->ao_mite_ring, s, cmd, 0x00ffffff); ni_ao_cmd_set_interrupts(dev, s); /* @@ -3381,11 +3418,7 @@ static int ni_ao_cmdtest(struct comedi_device *dev, struct comedi_subdevice *s, err |= comedi_check_trigger_arg_is(&cmd->convert_arg, 0); err |= comedi_check_trigger_arg_is(&cmd->scan_end_arg, cmd->chanlist_len); - - if (cmd->stop_src == TRIG_COUNT) - err |= comedi_check_trigger_arg_max(&cmd->stop_arg, 0x00ffffff); - else /* TRIG_NONE */ - err |= comedi_check_trigger_arg_is(&cmd->stop_arg, 0); + err |= comedi_check_trigger_arg_max(&cmd->stop_arg, 0x00ffffff); if (err) return 3; @@ -5240,7 +5273,6 @@ static irqreturn_t ni_E_interrupt(int irq, void *d) unsigned long flags; #ifdef PCIDMA struct ni_private *devpriv = dev->private; - struct mite_struct *mite = devpriv->mite; #endif if (!dev->attached) @@ -5252,8 +5284,7 @@ static irqreturn_t ni_E_interrupt(int irq, void *d) a_status = ni_stc_readw(dev, NISTC_AI_STATUS1_REG); b_status = ni_stc_readw(dev, NISTC_AO_STATUS1_REG); #ifdef PCIDMA - if (mite) { - struct ni_private *devpriv = dev->private; + if (devpriv->mite) { unsigned long flags_too; spin_lock_irqsave(&devpriv->mite_channel_lock, flags_too); @@ -5269,7 +5300,7 @@ static irqreturn_t ni_E_interrupt(int irq, void *d) ao_mite_status = mite_get_status(devpriv->ao_mite_chan); if (ao_mite_status & CHSR_LINKC) writel(CHOR_CLRLC, - mite->mite_io_addr + + devpriv->mite->mite_io_addr + MITE_CHOR(devpriv-> ao_mite_chan->channel)); } |